Samsung KH 2329 User Manual

User Guide

www.sprint.com

marks are the property of their respective owners.

10/27/08

Ma king and Answering Calls . . . . . . . . . . . . . . . 29

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

2B. Your Device’s Settings . . . . . . . . . . . . . . . 42

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Your Device’s Menu . . . . . . . . . . . . . . . . . . . . . . . ii

Section 1: Getting Started . . . . . . . . . . . . . . . . . 1

1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . 2

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Power Management . . . . . . . . . . . . . . . . . . . . . . . 49

Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . 54

TTY Use With Sprint Service . . . . . . . . . . . . . . . . 58

De vice Customization . . . . . . . . . . . . . . . . . . . . . . 59

Using Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . 61

2C. Your Device’s Security . . . . . . . . . . . . . . . 65

Setting Up Your Device . . . . . . . . . . . . . . . . . . . . . . 2

Activating Your Device . . . . . . . . . . . . . . . . . . . . . . 5

Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . 7

Sprint Account Passwords . . . . . . . . . . . . . . . . . . . 7

Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Section 2: Your Device . . . . . . . . . . . . . . . . . . . 11

2A. Device Basics . . . . . . . . . . . . . . . . . . . . . . . 12

Accessing the Security Menu . . . . . . . . . . . . . . . 65

Using Your Device’s Device Lock Feature . . . . 65

Using Special Numbers . . . . . . . . . . . . . . . . . . . . 68

Using Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Managing Certificates . . . . . . . . . . . . . . . . . . . . . 69

Resetting Your Device . . . . . . . . . . . . . . . . . . . . . 70

Security Features for Data Services . . . . . . . . . . 70

Your Device Features . . . . . . . . . . . . . . . . . . . . . 12

Viewing the Display Screen . . . . . . . . . . . . . . . . . 17

Features of Your Device . . . . . . . . . . . . . . . . . . . . 22

Turning Your Device On and Off . . . . . . . . . . . . . 24

Using Your Device’s Battery and Charger . . . . . 25

Navigating Through Device Menus . . . . . . . . . . 28

Displaying Your Phone Number . . . . . . . . . . . . . 29

2D. Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

2G. Calendar and Tools . . . . . . . . . . . . . . . . . 88

Understanding Roaming . . . . . . . . . . . . . . . . . . . 72

Setting Y o ur Device’s Roam Mode . . . . . . . . . . 73

2E. Call History . . . . . . . . . . . . . . . . . . . . . . . . . 75

Using Your Device’s Calendar . . . . . . . . . . . . . . . 88

Using Your Device’s Alarm Clock . . . . . . . . . . . . 92

Using Your Device’s Notepad . . . . . . . . . . . . . . . 93

Using Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Managing Voice Memos . . . . . . . . . . . . . . . . . . . 99

Using the Tip Calculator . . . . . . . . . . . . . . . . . . . 100

Using the Calculator . . . . . . . . . . . . . . . . . . . . . . 101

Using the Smart Converter . . . . . . . . . . . . . . . . . 101

Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . 102

Using the W orld Clock . . . . . . . . . . . . . . . . . . . . 102

Using the File Viewer . . . . . . . . . . . . . . . . . . . . . 103

2H. Usi ng the microSD Card . . . . . . . . . . . . 104

Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Call History Options . . . . . . . . . . . . . . . . . . . . . . . 76

Making a Call From the Call History . . . . . . . . . 78

Saving a Phone Number From Call History . . 78

Deleting Call History Entries . . . . . . . . . . . . . . . . 79

2F. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Adding a New Contacts Entry . . . . . . . . . . . . . . 80

Assigning Speed Dial Numbers . . . . . . . . . . . . 81

Finding Contacts Entries . . . . . . . . . . . . . . . . . . . 82

Contacts Entry Options . . . . . . . . . . . . . . . . . . . . 84

Adding a Phone Number to a Contacts Entry 85

Editing a Contacts Entry’s Phone Number . . . . 85

Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . 85

Deleting Contacts . . . . . . . . . . . . . . . . . . . . . . . . 86

Beaming a Contacts Entry . . . . . . . . . . . . . . . . . 86

Selecting a Ringer Type for an Entry . . . . . . . . 87

Dialing Sprint Services . . . . . . . . . . . . . . . . . . . . 87

Using Y o ur Device’s microSD Card

and Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

microSD Settings . . . . . . . . . . . . . . . . . . . . . . . . . 106

microSD Folders . . . . . . . . . . . . . . . . . . . . . . . . . 107

Connecting Your Device to Your Computer . . 108

General Precautions . . . . . . . . . . . . . . . . . . . . . . 110

Using the RSS Reader . . . . . . . . . . . . . . . . . . . . 141

Using Internet Sharing . . . . . . . . . . . . . . . . . . . . 143

2L. Synchron izing with ActiveSync . . . . . . 144

2I. Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Adjusting Settings . . . . . . . . . . . . . . . . . . . . . . . . 115

Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . 117

Working with Pictures and Videos . . . . . . . . . . 119

Sending Pictures and Videos by Email . . . . . . 123

Printing Pictures via Bluetooth . . . . . . . . . . . . . . 124

2J. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . 126

ActiveSync Requirements . . . . . . . . . . . . . . . . . 144

Synchronization Overview . . . . . . . . . . . . . . . . . 145

Setting Up and Configuring ActiveSync . . . . . 146

Conn ecting with Your Computer . . . . . . . . . . . 148

Setting up Windows Media Player

Sync Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Turning Bluetooth On and Off . . . . . . . . . . . . . . 126

Using the Bluetooth Settings Menu . . . . . . . . . 127

Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . . 128

Bluetooth Information Settings . . . . . . . . . . . . . 130

Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . 131

Beaming Files . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Using Hands-Free Devices . . . . . . . . . . . . . . . . 135

Bluetooth OBEX FTP . . . . . . . . . . . . . . . . . . . . . . 135

Using a Bluetooth Virtual Serial Port . . . . . . . . 136

2K. Mobile Applications . . . . . . . . . . . . . . . . 137

Sync hing Music via Windows Media Player . 150

Cr eating a Custom Ring Tone . . . . . . . . . . . . . 151

Section 3: Sprint Service . . . . . . . . . . . . . . . . 153

3A. Sprin t Service Features: The Basics . 154

Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . 154

Using SMS Text Messaging . . . . . . . . . . . . . . . 160

Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

Responding to Call Waiting . . . . . . . . . . . . . . . 166

Making a Three-Way Call . . . . . . . . . . . . . . . . . 166

Using Call Forwarding . . . . . . . . . . . . . . . . . . . . 167

Launching Internet Explorer . . . . . . . . . . . . . . . . 137

Using Live Search . . . . . . . . . . . . . . . . . . . . . . . . 140

3B. Software Store and TV . . . . . . . . . . . . . . 168

Section 4: Safety and Warranty

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Using the Sprint Software Store . . . . . . . . . . . . 168

Your Sprint TV Channel Options . . . . . . . . . . . 169

Playing a Video or Audio Clip . . . . . . . . . . . . . 169

Sprint TV F AQs . . . . . . . . . . . . . . . . . . . . . . . . . . 170

3C. Sprint Worldwide Wireless Service . . . 172

4A. Important Safety Information . . . . . . . . 196

Gener al Precautions . . . . . . . . . . . . . . . . . . . . . . 196

Maintaining Safe Use of and Access to

Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197

Using Y o ur Phone With a Hearing

Aid Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

Your SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . 172

Using Your Device in GSM Mode . . . . . . . . . . 174

Using Your SIM Card’s PhoneBook . . . . . . . . 178

Setting GSM Services Options . . . . . . . . . . . . 180

Contacting Sprint . . . . . . . . . . . . . . . . . . . . . . . . 181

Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

Selecting a Network . . . . . . . . . . . . . . . . . . . . . . 183

3D. GPS Navigation . . . . . . . . . . . . . . . . . . . . 185

Caring for the Battery . . . . . . . . . . . . . . . . . . . . . 200

Radio Frequency (RF) Energy . . . . . . . . . . . . . . 201

Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . 202

Phone Guide Proprietary Notice . . . . . . . . . . . . 202

4B. Manufacturer’s Warranty . . . . . . . . . . . . 203

Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . 203

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . 185

Using Sprint Navigation . . . . . . . . . . . . . . . . . . . 186

Getting Driving Directions . . . . . . . . . . . . . . . . . 187

Configuring Your Navigation Preferences . . . 193

Launching the Product Tour . . . . . . . . . . . . . . . 194

Introduction

Because of updates in your device’s software,

this printed guide may not be the most current

version for your phone. Visit www.sprint.com

and log on to My Sprint Wireless to access the

most recent version of the user guide.

User Guide

Note

This User Guide introduces you to Sprint^®service and all

the features of your new device. It’s divided into four

sections:

Please refer to the Important Safety Information

section on page 196 to learn about information

that will help you safely use your device. Failure

to read and follow the Important Safety

Information in this user guide may result in

serious bodily injury, death, or property

damage.

WARNING

ࡗ

Section 1: Getting Started

Section 2: Your Device

Section 3: Sprint Service

Section 4: Safety and Warranty Information

Throughout this guide, you'll find tips that highlight

special shortcuts and timely reminders to help you

make the most of your new device and service. The

Table of Contents and Index will also help you quickly

locate specific information.

You'll get the most out of your device if you read each

section. However, if you'd like to get right to a specific

feature, simply locate that section in the Table of

Contents and go directly to that page. Follow the

instructions in that section, and you'll be ready to use

your device in no time.

2: Call Options

Your Device’s Menu

1: Any key answer

3: Voice mail number

4: International code

2: Phone number

The following list outlines your device’s menu structure.

For more information about navigating through the

menus, please see “Navigating Through Device

Menus” on page 28.

2: Display

1: Home Screen

1: Home screen layout

2: Show Recent Programs

3: Color scheme

Messaging

1: Text Messages

2: Setup E-mail

Calendar

4: Background image

5: Time out

2: Start Menu Style

1: Grid

2: List

Contacts

3: Sounds

Settings

1: Phone

1: Auto Answer

1: 2 seconds

3: 6 seconds

5: 10 seconds

2: 4 seconds

4: 8 seconds

6: Never

1: Ring Tone

4: Keypad Tone

1: Vibrate

2: None

1: Keypad control

3: Anticipation

5: Charming Intro Tone

6: City Light

8: Color Lounge

10: Floating Tone

12: Highway 101

14: Pause Tone

4: Bug’s Song

5: Call Alert

1: Minute beep

2: Connect tone

3: Signal fade tone

7: Classic Bell

9: Fast Tone

11: Glitter Tone

13: Maze of City

15: Rich Tone

16: Samsung Tune 17: Serene Tone

6: R2VS

18: Serene Tone2

20: Squash Tone

22: Techno Dance

24: Tumble Tone

19: Spanish Guitar

21: Sunny Day

23: Tremolo Tone

25: Vivid Street

1: None

3: M-Theater

2: 3D Sound

4: Profiles

2: Notification

1: New e-mail

1: Normal

2: Silent

2: New text message

3: New voice message

3: Vibrate

4: Outdoor

5: Automatic

4: New instant message

3: System Sound

1: Exclamation

2: Question

5: Power Management

1: Main battery

3: Warnings

iii

2: Backlight time out

7: Keypad backlight on

1: Any time

1: 5 seconds

3: 15 seconds

5: 60 seconds

2: 10 seconds

4: 30 seconds

6: Never

2: Custom time

8: Start time/End time

6: Connections

3: Display time out on AC

1: 10 seconds

3: 30 seconds

5: 2 minutes

2: 15 seconds

4: 1 minute

6: 5 minutes

8: Never

1: Wireless Manager

7: 10 minutes

1: All

2: Bluetooth

3: Phone

4: Display time out on Battery

2: Bluetooth

1: 10 seconds

3: 30 seconds

5: 2 minutes

2: 15 seconds

4: 1 minute

6: 5 minutes

8: Never

3: Bluetooth Profiles

1: OBEX FTP Server Setting

7: 10 minutes

2: BPP Setting

3: My Information Setting

5: Display brightness

4: Dial-up

1: Level1

3: Level3

5: Level5

2: Level2

4: Level4

1: New...

3: Sprint Data

2: Phone as Modem

6: Keypad backlight time out

5: Proxy

1: 1 second

3: 3 seconds

5: 5 seconds

2: 2 seconds

4: 4 seconds

6: 10 seconds

6: VPN

7: More...

1: USB to PC

2: Domain Enroll

4: Other Settings

5: Phone Information

6: Owner Information

7: More...

1: Date and Time

2: Roaming

1: Roaming option 2: Data roam guard

1. About

2: Error Reporting

3: Security

3: Customer Feedback

4: Windows Update

6: Setup E-mail

5: Managed Programs

7: More...

1: Device Lock

2: Certificates

Call History

3: Encryption

File Explorer

Internet Explorer

Windows Media

1: My Music

4: Emergency Numbers

5: Phone Reset

4: Memory Information

5: Text Input Settings

1: Input Language

3: Suggest after

2: Suggest words when typing

4: Suggest

2: My Videos

5: Add a space after word

6: Enable auto-correct

3: My TV

4: My Playlists

5: Now Playing

6: Remove Programs

7: More...

1: Accessibility

2: Key Settings

3: Regional Settings

1: Shooting Mode

Organizer

1: Single shot

3: Mosaic shot

5: Night shot

2: Multi shot

4: Frame shot

1: Alarms

2: Notepad

2: Size

3: Tasks

1: 1280x960

3: 320x240

2: 640x480

4: Voice Notes

5: World Clock

Office Mobile

1: Excel Mobile

2: OneNote Mobile

3: PowerPoint Mobile

4: Word Mobile

File Viewer

Camera

3: Timer

1: Off

3: 5 sec

2: 2 sec

4: 10 sec

4: White Balance

1: Auto

3: Cloudy

5: Fluorescent

2: Daylight

4: Tungsten

5: Effect

1: No effects

3: B/W

2: Sepia

4: Negative

6: Help

1: Camera

7: Settings

1: General

Press Menu (right softkey), and then use the

navigation key to scroll through and display the

following options:

2: Camera

3: Camcorder

7: Settings

1: General

2: Camcorder

Press Menu (right softkey), and then use the

navigation key to scroll through and display the

following options:

2: Camera

3: Camcorder

1: Size

Accessories

1: 320x240

2: 176x144

1: Calculator

2: Timer

1: Off

3: 5 sec

2: 2 sec

4: 10 sec

2: Smart Converter

1: Currency

3: Weight

5: Area

2: Length

4: Volume

6: Temperature

3: White Balance

1: Auto

2: Daylight

3: Cloudy

5: Fluorescent

4: Tungsten

3: Speed Dial

4: Stopwatch

5: Task Manager

6: Tip Calculator

7: Vision

4: Audio

1: On

2: Off

5: Effect

1: No effects

3: B/W

2: Sepia

4: Negative

ActiveSync

Games

6: Help

1: Bubble Breaker

2: Solitaire

vii

Pictures & Videos

Get On Demand

Getting Started

Service Mode

1: Sprint CDMA

2: Int’l GSM

Software Store

Sprint Navigation

Sprint TV

1: Set date and time

2: Setup e-mail

Voice Command

Windows Live

In Use Menu

3: Set up a device password

4: Set up a Bluetooth headset

5: Set background

6: Set ring tone

Press Menu to display the following options:

1: Mute/Unmute

3: Turn Hands-free On/Off

4: Contacts

2: Speakerphone On/Off

7: Transfer music

8: Add/remove Getting Started

International Usage

Internet Sharing

Live Search

5: Save to Contacts

7: Call History

6: View Calendar

Messenger

RSS Reader

viii

Section 1

Getting Started

Section 1A

Setting Up Your Device

1. Remove the battery cover.

Ⅲ Press down with thumbs as indicated below.

Setting Up Service

Ⅲ While applying pressure, slide cover away from

ࡗ

Setting Up Y our Device

Activating Your Device

Setting Up Your Voicemail

Sprint Account Passwords

Getting Help

the camera lens (as shown below).

Setting up service on your new device is quick and easy. This

section walks you through the necessary steps to set

up, turn on, and unlock your device; set up your

voicemail; establish passwords; and contact Sprint for

assistance with your Sprint service.

Section 1A. Setting Up Service

2. Install the battery.

3. Press

device on.

to turn the

Ⅲ Insert the battery into the opening on the back of

the device, making sure the connectors align.

Gently press down to secure the battery.

Ⅲ Your device will turn on,

search for Sprint service,

and then enter standby

mode.

Ⅲ Position the battery cover and firmly slide it in until

you hear a click.

Ⅲ If your device is not yet

activated, or if it is

locked, see “Activating

Your Device” on page 5

for more information.

Initial Setup

After you have powered on

your device, you may wish to set some basic options.

After the initial power-up, your device will display the

Windows Mobile^®screen where you will be guided

through a series of setup procedures.

1. From initial screen, press Next (right softkey) to

begin the setup process.

Section 1A. Setting Up Service

2. Use both the navigation key and keypad to enter

new values within the date and time fields. See

“Configuring the Time and Date” on page 62..

●

Simple PIN: must be at least four characters in

length and cannot contain a simple sequence

such as 000, 1111, or 1234.

● To toggle between AM and PM, highlight the

AM/PM field and then press either A (for AM)

or P (PM) on the keypad.

Strong alphanumeric: must be at least seven

characters in length and must contain at least

one character from each of the following

categories: uppercase/lowercase letters,

numerals, and symbols. Examples of strong

alphanumeric passwords are sb?8A!3 and

%$VH5hW.

3. Press Next (right softkey) to continue on to the

password setup screen where you can create a

password which must be used to access your

device’s features and data. See “Locking Your

Device with a Password” on page 65.

Ⅲ Password: use the keypad to enter the desired

password.

– or –

Ⅲ Confirm password: use the keypad to re-enter the

same password.

Skip to step 7 if you do not wish to assign a

password at this time.

6. Press Done (left softkey) to store these settings.

4. Select “Prompt if device unused for” and press

. (Enabling this option activates the remaining

fields.)

7. From the E-mail screen, press Skip (left softkey) to

return to the email account setup process at a later

time, or press Next (right softkey) to continue with

the setup process.

5. Select each field and enter the desired information:

Ⅲ Minutes: to select the amount of unused time (idle)

Ⅲ For more information, please see the Set UpYour

Email guide included with your device.

required before you are prompted for a password.

Ⅲ Password type: to choose from one of the following

PIN types:

Section 1A. Setting Up Service

8. Press Next (right softkey) to choose whether you

would like to participate in the Windows®

Feedback program.

Activating Your Device

ⅷ If you purchased your phone at a Sprint Store, your phone

should be activated and ready to use.

Ⅲ Select either Enable or Disable and press Done

(left softkey).

ⅷ If you received your phone in the mail and it is for a new Sprint

account or a new line of service, your phone is designed

to activate automatically when you first turn it on. To

confirm your activation, make a phone call.

Some data connection charges may apply during

the feedback update process.

Note

Although your device’s battery should have enough

charge (to power on the device, find a signal, set up

your voicemail, and make a call), it is recommended

that you fully charge your battery prior to its initial use.

See “Charging the Battery” on page 26 for details.

ⅷ If you received your phone in the mail and you are activating a

new phone for an existing number on your account, you will

need to contact Sprint Customer Service to activate

your new phone. There are two activation options:

Ⅲ From your computer’s Web browser, go to

www.sprint.com/activate and complete the onscreen

instructions to activate your phone.

Ⅲ Dial 1-888-211-4727 from another phone to contact

Sprint Customer Service to complete the phone

activation.

When you have finished, make a phone call to confirm

your activation.

Section 1A. Setting Up Service

Do not press

Pressing

while the phone is being activated.

cancels the activation process.

If you can’t recall your lock code, try using the last

four digits of your wireless phone number. If this

doesn’t work, call Sprint Customer Service at

1-888-211-4727.

Tip

If you are having difficulty with activation, contact

Sprint Customer Service by dialing 1-888-211-4727

from any other phone.

Note

Using your Device to Call

ᮣ

Make your first call.

Unlocking Your Device

Ⅲ Use your keypad to enter a phone number.

Ⅲ Press

1. Press

to turn the device on.

See “Making and Answering Calls” on page 29.

2. Press Unlock (left softkey).

To select a softkey, press the softkey button directly

Note

below the softkey text that is displayed at the bottom

left and bottom right of your device’s display screen.

Softkey actions change according to the screen

you’re viewing and will not be displayed if there is no

corresponding action available.

3. Press

to unlock the device.

Section 1A. Setting Up Service

For more information about using your voicemail, see

“Using Voicemail” on page 154.

Setting Up Your Voicemail

All unanswered calls to your device are automatically

transferred to your voicemail, even if your device is in

use or turned off. Therefore, you will want to set up your

voicemail and personal greeting as soon as your

device is activated.

Sprint Account Passwords

As a Sprint customer, you enjoy unlimited access to

your personal account information, your voicemail

account, and your data services account. To ensure

that no one else has access to your information, you

will need to create passwords to protect your privacy.

1. From standby mode, press and hold

2. Follow the system prompts to:

Ⅲ Create your passcode.

Account Password

Ⅲ Record your name announcement.

Ⅲ Record your greeting.

If you are the account owner, you'll have an account

password to sign on to www.sprint.com and to use when

calling Sprint Customer Service. If you are not the

account owner (if someone else receives the bill for

your Sprint Service), you can get a sub-account

password at www.sprint.com.

Ⅲ Choose whether to activate One-Touch Message

Access (a feature that lets you access messages

simply by pressing and holding

, bypassing

the need for you to enter your passcode).

Voicemail Passcode

Note

If you are concerned about unauthorized access to

your voicemail account, Sprint recommends that you

enable your voicemail passcode (do not activate

One-Touch Message Access).

Section 1A. Setting Up Service

Voicemail Password

Getting Help

You'll create your voicemail password (or passcode)

when you set up your voicemail. See “Setting Up Your

Voicemail” on page 154 for more information on your

voicemail password.

Visit www.sprint.com

You can go online to:

ⅷ Access your account information.

Data Services Password

ⅷ Check your minutes used (depending on your Sprint

With your Sprint smart device, you may elect to set up

an optional data services password to control data

access and authorize Premium Services purchases.

service plan).

ⅷ View and pay your bill.

ⅷ Enroll in Sprint online billing and automatic payment.

ⅷ Purchase accessories.

For more information, or to change your passwords,

sign on to www.sprint.com.

ⅷ Shop for the latest Sprint devices.

ⅷ View available Sprint service plans and options.

ⅷ Learn more about data services and other great

products like Sprint TV^SM, games, ringers, screen

savers, and more.

ⅷ See “Dialing Sprint Services” on page 87.

Section 1A. Setting Up Service

Reaching Sprint Customer Service

Sprint 411

You can reach Sprint Customer Service in many

different ways:

Sprint 411 gives you access to a variety of services and

information through your device, including residential,

business, and government listings; movie listings or

showtimes; driving directions, restaurant reservations,

and major local event information. You can get up to

three pieces of information per call, and the operator

can automatically connect your call at no additional

charge.

ⅷ Press

on your device.

ⅷ Sign on to your account at www.sprint.com.

ⅷ Call us toll-free at 1-888-211-4727 (Consumer

customers) or 1-800-927-2199 (Business customers).

ⅷ Write to us at Sprint Customer Service, P.O. Box 8077,

London, KY 40742.

There is a per-call charge to use Sprint 411, and you

will be billed for airtime.

Receiving Automated Billing Information

To call Sprint 411:

Your device lets you access billing information on your

Sprint account. This information includes balance due,

payment received, invoicing cycle, and an estimate of

the number of minutes used since your last invoicing

cycle.

ᮣ

Press

on your device.

To access automated billing information:

ᮣ

Press

on your device.

This service may not be available in all Affiliate areas.

Note

Section 1A. Setting Up Service

Sprint Operator Services

Sprint Operator Services provides assistance when

placing collect calls or when placing calls billed to a

local telephone calling card or third party.

To access Sprint Operator Services:

ᮣ

Press

on your device.

For more information or to see the latest in products

and services, visit us online at www.sprint.com.

Section 1A. Setting Up Service

Section 2

Your Device

Section 2A

Your Device Features

1. Earpiece

Device Basics

ࡗ

Your Device Features

18. Navigation

Key

2. Display Screen

3. OK Key

Viewing the Display Screen

Features of Y our Device

17. Right Softkey

Turning Your Device On and Off

Using Your Device’s Battery and Charger

Navigating Through Device Menus

Displaying Your Phone Number

Making and Answering Calls

Entering Text

4. Left Softkey

5. Talk Key

16. End Key

6. Home/

Task Manager Key

15. Back/Clear

Key

7. Voicemail Key

8. Function Key

14. Keypad

13. Camera Key

Your device is packed with features that simplify your life

and expand your ability to stay connected to the people and

information that are important to you. This section will guide

you through the basic functions and calling features of

your device.

12. Microphone

9. Plus Code

Dialing Key

11. Messaging Key

10. Space/Silent

Mode Key

Section 2A. Device Basics

27. microSD Slot

25. Volume Key

26. Power Button

19. Mirror

23. External

Speaker

22. Camera Lens

20. Thumbwheel

21. Battery Cover

24. Power/Accessory

Interface Connector

28. Back-Clear/

Camera Access Key

Section 2A. Device Basics

6. Home/Task Manager Key provides quick access back

Key Functions

to the Home (Idle) screen.

1. Earpiece lets you hear the caller and automated

prompts.

Ⅲ Press and release to exit the current screen or

application and launch the Home screen.

2. Display Screen displays all the information needed

to operate your device, such as the call status, the

Contacts list, the date and time, and the signal and

battery strength.

Ⅲ Press and hold to launch the Task Manager

screen.

7. Voicemail Key allows you to quickly access your

voicemail. Press and hold this key for two seconds

to automatically dial your voicemail’s phone

number.

3. OK Key lets you access the device’s menus and

selects the highlighted choice when navigating

through a menu.

8. Function Key allows you to quickly launch

predefined applications or activate specific

functionality. This feature is activated by pressing

4. Left Softkey lets you select softkey actions or menu

items corresponding to the bottom left line on the

display screen. For example, when you receive an

incoming call, you would press Answer (left softkey)

to accept the call.

and holding the

specified keys.

key in conjunction with other

9. Plus Code Dialing Key automatically dials the

international access code for the country in which

you are located (for instance, 011 for international

calls placed from the United States).

5. Talk Key allows you to place or receive calls, answer

Call Waiting, or use Three-Way Calling.

Ⅲ In standby mode, press once to access your call

history (page 75).

Ⅲ Press twice to call the most r ecent phone number

from the call history list (page 75).

Section 2A. Device Basics

10. Space/Silent Mode Key adds either a space to a text

15. Back/Clear Key deletes characters from the display

while in text entry mode. When in a menu, press

to return to the previous menu. This key also

allows you to return to the previous screen in a

data services session.

entry or activates the device’s silent mode.

Ⅲ Press briefly to insert a blank character space into

a message.

Ⅲ Press and hold to put your device in silent mode.

16. End Key lets you end a call, or return to standby

mode. While in the main menu, it returns the

device to standby mode and cancels your input.

When you receive an incoming call, press to enter

silent mode and mute the ringer.

11. Messaging Key allows you to either access either the

SMS Inbox or Message Composer.

Ⅲ Press briefly to access the SMS (Text) message

Inbox.

Ⅲ Press and hold to launch the Text Message

Composer (for new messages).

17. Right Softkey lets you select softkey actions or menu

items corresponding to the bottom right line on the

display screen. For example, when you receive an

incoming call, you would press Ignore

12. Microphone allows other callers to hear you clearly

when you are speaking to them.

(right softkey) to reject the call and route it to your

voicemail.

13. Camera Key lets you access the Camera preview

where you can either take pictures or shoot videos.

18. Navigation Key scrolls through the device’s onscreen

14. Keypad allows you to enter numbers, letters, and

characters using a full keypad interface that has

the same layout as a computer keyboard. Press

and hold keys 2–99 for speed dialing.

menus and options.

19. Mirror displays your reflection while taking a picture

or shooting video.

Section 2A. Device Basics

20. Thumbwheel lets you navigate through menu

options (for example, when using the Quick

Launcher [page 18] or within your Contacts list.)

24. Power/Accessory Interface Connector lets you connect

a power cable and optional accessories such as a

USB cable or wired headset for convenient hands-

free conversations.

Ⅲ Press briefly to either select an option or execute

the selected application.

CAUTION! Inserting an accessory into the incorrect jack

may damage the device.

Ⅲ Press and hold to display the Quick Launcher

25. Volume Key allows you to adjust the audio volume

in standby mode or adjust the voice volume during

a call. The volume key can also be used to scroll

up or down to navigate through the different menu

options.

screen (as shown on page 28).

21. Battery Cover covers and secures the internal

battery and the SIM card.

22. Camera Lens, as part of the built-in camera, lets you

take pictures and videos.

26. Power Button

, located at the top of the device,

lets you both access a Quick List of functions and

power the device on and off (as shown on

page 24).

23. External Speaker allows you to hear the other caller

and the different ring tones or sounds offered by

your device.

Ⅲ Press and release to access the Quick List screen

where you can access the device Ringer profiles

and the Wireless Manager, and lock the device or

turn it off.

Ⅲ Press and hold to shut down the device or turn

the device back on.

Section 2A. Device Basics

27. microSD Slot lets you use the microSD card to

expand the memory of your device. (See “Using

Your Device’s microSD Card and Adapter” on

page 104.)

Viewing the Display Screen

Your device’s display screen provides information

about your device’s status and options. The display can

be divided into five main areas:

28. Back-Clear/Camera Access Key

lets you not only

clear an entry and return to a previous menu, but

also activate the camera and video mode to take

pictures and videos. This button is also user-

configurable. (See “Device Customization” on

page 59.)

Ⅲ Status Icons: indicate your device’s current status.

Ⅲ Home screen: shows items such as device

numbers, menu icons, and other listings.

(For more information see page 45.)

●

Recently Used Apps.: provides an icon list of

recently accessed/used applications or

features. This list becomes updated with each

consecutive application or feature which is

accessed/used.

Ⅲ Press briefly to either clear an entry or go back to

a previously active menu.

Ⅲ Press and hold to launch the camera mode and

access the Pictures menu and either take pictures

or shoot videos.

●

Recently Used Apps.: displays the nearest

upcoming event in your calendar. Select it and

press

to access your Today Calendar.

Message Access: provides quick access to the

two different message types: SMS (text

messages) and Email.

Taskbar/Softkey: provides access to W indows

Mobile features such as the Start menu and

Contacts.

Section 2A. Device Basics

This list identifies the symbols you’ll see on your

device’s display screen:

Status Icons

shows your current signal strength. (The more

lines you have, the stronger your signal.)

Recently Used

Apps.

Home

Screen

Upcoming Events

Message Access

indicates the wireless feature has been turned

off. Your device is in Flight mode and your

cellular radio is turned off.

indicates there is no service available and your

phone is searching for a network.

indicates your phone is in a roaming area.

Quick Launcher

(Task Manager, Calendar,

Alarm, and Edit Menu)

indicates a data call is in progress and

provides its signal strength. (The icon is

animated while a data session is active.)

indicates there are no data sessions active.

Taskbar/Softkey

indicates the 1xRTT high speed data transfer

protocol is currently in use.

Ⅲ Quick Launcher: appears as a scrollable list at the

far right of the screen when the thumbwheel is

pressed and held for mor e than three seconds.

Section 2A. Device Basics

indicates your device has high speed data

service (EV-DO protocol), which is required for

video streaming and downloads.

indicates Silence All mode is enabled. The

ringer for the selected profile is set to Off.

indicates your device is operating in TTY

mode.

indicates a Voice call is in progress and

provides its signal strength.

indicates the camera is enabled.

indicates the camcorder is enabled.

indicates the self-timer function is enabled.

indicates the shooting mode.

indicates you missed a call.

indicates the speakerphone is enabled.

indicates you have new text messages.

indicates you have voicemail messages.

OFF

indicates the white balance has been set to

automatic.

AUTO

(Press and hold

to call your voicemail box.)

indicates you have new email messages.

indicates your device’s location feature is on.

indicates your device’s location feature is off.

indicates the white balance has been set to

daylight.

indicates the white balance has been set to

cloudy.

indicates the device has not detected an

internal GSM SIM card.

indicates the white balance has been set to

tungsten.

indicates ringer volume is set to vibrate.

Section 2A. Device Basics

indicates the white balance has been set to

fluorescent.

Using Softkeys

Softkeys are special keys whose functions are

determined by the currently active dialog, menu, or

page. The current function for these keys is displayed

above them on the screen. Your device has a left (

indicates the effects mode.

launches the shortcut key screen for both

camera and camcorder mode.

HELP

)

and a right softkey (

launches the options menu for both the

camera and camcorder.

indicates battery charge level (icon shown is

full).

indicates battery charge level (icon shown fully

discharged and device will power down.)

indicates battery is being charged.

indicates that Bluetooth^®technology is active

and enabled.

Section 2A. Device Basics

1. Remove the storage card from the device, if one is

present.

Using the End Key

The

key can function differently depending on your

current task, location, and the length of the press.

A hard reset will erase the cipher key used for

encrypting data on the microSD card. Please ensure

that all personal data stored on this card is backed

up to a computer so that it can later be transferred

back to the memory card.

Note

ᮣ

In Idle mode, while in a menu or page:

Ⅲ A brief press takes you back to the Home Screen

Ⅲ A longer press locks the device.

While in a voice call:

2. With phone powered off:

Ⅲ A brief press hangs up the current call.

Ⅲ A longer press locks the device.

Ⅲ Press and hold both the left and right softkeys.

Ⅲ While both softkeys are held down, press and

hold

until the unit powers on.

ᮣ

While in a data call:

3. As the device begins to power on, release both

softkeys.

Ⅲ A brief press puts the device into a dormant

mode. (A second press will end the data call.)

Ⅲ A longer press locks the device.

Once the phone powers on, you should see an

onscreen alert message (a white screen with blue

text). If you do not see this screen, let the device

power up normally, turn it off again, and then repeat

steps 2 and 3.

Note

Completing a Hard Reset of the Device

This reset will delete any installed applications

or personal information saved to the device.

Contacts stored on the SIM card will not be

deleted.

WARNING

Section 2A. Device Basics

4. Immediately after the alert screen appears, press

ⅷ Digital dual-band capability allows you to make and

receive calls while on the Sprint National Network

and to roam on other 1900 and 800 MHz digital

networks where Sprint has implemented roaming

agreements (page 72).

the left softkey.

You have only five seconds to press the left

softkey. Otherwise, the device will start up

normally and the reset will be unsuccessful.

Important

ⅷ Windows Mobile 6.1 comes with a Getting Started

Center right on the phone. This application helps you

set features such as date and time and ring tones,

set up your email accounts, transfer music, and

much more.

5. If the reset was successful, the device displays a

pop-up message stating the device is currently

reformatting. This process can take several

minutes. Allow the process to finish without

interruption.

ⅷ The Recent Programs page gives you instant access

to your most recently used programs. These

programs are also displayed in a row of icons at the

top of the Home screen (page 17).

6. When the device has finished resetting, follow the

Windows Mobile setup instructions displayed on

the screen. See “Initial Setup” on page 3.

ⅷ Task Manager lets you manage your device’s

memory, processor usage, and battery life more

effectively by letting your close or switch between

different programs (page 51).

ⅷ Windows Mobile^®6.1 offers support for many types

of Office 2007 files as well as the Adobe PDF 1.8 file

format (page 103).

Features of Your Device

The Samsung ACE^TMis lightweight, easy-to-use, and

reliable, and it offers many features and service

options. This list previews some of those features and

provides page numbers where you can find out more:

Section 2A. Device Basics

ⅷ Improved messaging capabilities such as Threaded

Text Messaging (page 163), Recipient

auto-completion (page 161), and multi-item

selections make texting and emailing easier and

quicker (page 164).

ⅷ Live Search^®for Windows Mobile uses GPS to find

what you want by direction or category and provides

you with real-time traffic updates and movie listings

for your area (page 140).

ⅷ Windows Mobile^®6.1 comes preinstalled and turns

your device into a portable computer that can use

mobile versions of Microsoft Office programs such as

Word, Excel, and PowerPoint. (For more information,

please see the Setting Up Email guide included with

your device.)

ⅷ Your device gives you access to the Sprint Software

Store, where you can purchase not only Windows-

based applications, but also Games, Ringers, and

additional Screen Savers (page 168).

ⅷ The Samsung ACE^TMuses ActiveSync^®4.5 to keep

your computer and your device synchronized

(page 144).

ⅷ Sprint Navigation uses built-in GPS technology to

quickly locate nearby companies and services

(page 186).

ⅷ Internet Explorer lets you copy text from any web

page and then paste it into other applications, such

as SMS text or email (page 137).

ⅷ Sprint TV (page 169) lets you enjoy live and

streaming video and audio on your device.

ⅷ The preinstalled SIM card lets you use your device

when you are traveling outside of the U.S.

(page 174).

ⅷ Data services (page 70) lets you get exciting On

Demand media content through your device.

ⅷ SMS Text Messaging (page 160) provides quick and

convenient messaging capabilities.

ⅷ Your Contacts list can be stored onto either your

Phone or internal SIM card (page 80).

Section 2A. Device Basics

ⅷ The built-in Calendar offers several personal

information management features to help you

manage your busy lifestyle (page 88).

Turning Your Device On and Off

Turning Your Device On

ⅷ The Location feature works in connection with

available location-based services (page 51).

1. Press

, located at the

top of the device.

ⅷ The keypad lets you quickly type messages with one

keypress per letter (page 38).

Once your device is on, it may

display “Searching for

ⅷ Speed dial lets you dial device numbers with one or

two keypresses (page 37).

Service.” When your device

finds a signal, it automatically

enters standby mode – the

device’s idle state. At this

point, you are ready to begin

making and receiving calls.

ⅷ The Internet Sharing feature lets you use your device

as a modem to connect your computer to the

Internet anywhere on the Sprint National Network

(page 143).

Your device and service provide access to the Sprint

Mobile Broadband Network and its enhanced data

services, including Sprint TV, fast Web access,

downloadable games, ringers, and applications, and

more.

Note

After five seconds of inactivity,

the Power Save mode is

activated.

In Power Save mode, your device searches for a signal

periodically without your intervention.

The Power Save feature conserves your battery

power when you are in an area where there is no

signal.

Note

Section 2A. Device Basics

Turning Your Device Off

Battery Capacity

ᮣ

Press and hold

the powering down animation on the display

screen.

for two seconds until you see

Your device is equipped with a Lithium Ion (Li-Ion)

battery. It allows you to recharge your battery before it is

fully drained. A fully charged battery provides up to 4.3

hours of continuous digital talk time.

Your screen remains blank while your device is off

(unless the battery is charging).

When the battery reaches 5% of its capacity, the battery

icon (

) blinks. When there are approximately two

minutes of talk time left, the device sounds an audible

alert and then turns off.

Using Your Device’s Battery

and Charger

Long backlight settings, searching for service, vibrate

mode, browser use, and other variables may reduce

the battery’s talk and standby times.

Note

Use only Sprint-approved or Samsung-

approved batteries and chargers with your

device. Failure to use a Sprint-approved or

Samsung approved battery and charger may

increase the risk that your device will overheat,

catch fire, or explode, resulting in serious

bodily injury, death, or property damage.

WARNING

Watch your device’s battery level indicator and

charge the battery before it runs out of power.

Tip

Installing the Battery

ᮣ

See “Setting Up Your Device” on page 2.

These batteries and accessories can be found at Sprint

Stores or through Samsung^®; or call 1-866-343-1114 to

order. They’re also available at www.sprint.com.

Section 2A. Device Basics

Removing the Battery

Charging the Battery

1. Make sure the power is off so that you don’t lose

any stored numbers or messages.

Charge your battery as soon as possible so you can

begin using your device.

2. Press down on the upper end of the battery

compartment cover (just above the embossed

Samsung logo), slide the cover off, and remove the

battery from the device.

Keeping track of your battery’s charge is important. If

your battery level becomes too low, your device

automatically turns off, and you will lose any

information you were just working on.

For a quick check of your device’s battery level, glance

at the battery charge indicator located in the upper-

right corner of your device’s display screen. If the

battery charge is getting too low, the battery icon

(

)blinks and the device sounds a warning tone.

Always use a Sprint-approved or Samsung-approved

desktop charger, travel charger, or vehicle power

adapter to charge your battery. Included in the

packaging is a non-charging USB cable used for data

transfer.

After setting up your phone, you should charge the

battery for at least four hours to ensure it is fully

charged.

Do not handle a damaged or leaking Li-Ion

battery as you can be b urned.

WARNING

Section 2A. Device Basics

Conserving Battery Power

Using the Charger

Each unused background application both increases

the drain on your battery and decreases your device’s

performance. Close any unused applications via the

Task Manager.

ᮣ

Plug the flat end of the charger into the device’s

power/accessory interface connector and the

other end into an electrical outlet.

1. Press Start (left softkey) > All Programs (left softkey) >

Accessories > Task Manager.

2. Select an application from the list and press Stop

(left softkey).

See “Navigating Through Device Menus” on page 28

for more detailed information about using your

device's menus.

Note

Correct

Incorrect

With the Sprint-approved Li-Ion battery, you can

recharge the battery before it becomes completely run

down.

Section 2A. Device Basics

Selecting Menu Items from the Main Menu

Navigating Through Device Menus

As you navigate through the main menu screen,

applications (programs) are highlighted. Select any

The navigation key on your device lets you scroll

through menus quickly and easily. The scroll bar at the

right of the menu keeps track of your position in the

menu at all times.

application by highlighting it and pressing

display is set to List view [page 48], you can select any

numbered option by pressing the corresponding

number on the keypad.)

. (If your

To navigate through a menu, one option is to press the

navigation key up or down. If you are in a first-level

menu, such as Settings, you may navigate to the next

For example, if you want to adjust a device setting:

1. Press Start (left softkey) > All Programs (left softkey) to

access the main menu.

menu by pressing

pressing

or to the previous menu by

2. Pressing Start displays the eight most Recent

Programs you have used. If the application you are

looking for is not present, press All Programs

(left softkey) to display all the programs on your

device.

A second navigation option

is to use the thumbwheel

located on the right side of

the device. While in a list, the

thumbwheel can be used to

quickly scroll through

3. Select Settings, and then select Sounds by pressing

(if your device is set to list view [page 48]) or

by highlighting it (using either the navigation key or

available options.

For a diagram of your

device’s menu, please see

“Your Device’s Menu” on

page ii.

thumbwheel) and pressing

Section 2A. Device Basics

Displaying Your Phone Number

For the purposes of this guide, these steps

condense into “Press Start > All Programs > Settings

> Sounds.”

Note

ᮣ

Press Start > All Programs > Settings > Phone

Information. (Your phone number and other

information about your device will be displayed.)

If your device is set to Grid view (default

setting), you can scroll through All Programs

simply by pressing the navigation key down.

However, in List view, you may need to press

More (left softkey) one or more times to find a

particular program. (See “Selecting the Start

Menu Style” on page 48.)

Important

Making and Answering Calls

Making Calls

Placing a call from your device is as easy as making a

call from any landline device. Enter the number, press

, and you’re on your way to clear calls.

Backing Up Within a Menu

To go to the previous menu:

1. Make sure your device is on.

ᮣ

Press

To return to standby mode:

Press

2. Enter a phone number from standby mode. (If you

make a mistake while dialing, press

the numbers.)

to erase

ᮣ

3. Press

and Call Guard is enabled, select Roam Call and

press . See “Setting Your Device’s Roam

Mode” on page 73.)

. (To make a call when you are roaming

Section 2A. Device Basics

4. Press

when you are finished.

ⅷ Menu: Accessed by pressing Menu (

you with the following options:

), provides

To redial your last outgoing call, press TALK (

twice.

)

Tip

Ⅲ Open: Allows you to display information specific to

the current caller (if they have been previously

entered into the Contacts list).

When making calls off the Sprint National Network,

always dial using 11 digits (1 + area code + phone

number).

Ⅲ Send Text Message: Allows you to send a text

message to the currently entered (or selected)

number.

You can also place calls from your device by using

speed dialing numbers from your Contacts (page 37)

and using your Call History listings (page 78).

Ⅲ View: Allows you to filter your onscreen list of

numbers by one of three criteria: Calls and

Contacts, All Calls, or Speed Dial.

Dialing Options

● The Speed Dial filter allows you to enter a

number (1-99) and then display any speed

dial entries which match the specified speed

When you enter numbers in standby mode, you will

see a variety of dialing options displayed as softkeys on

the device’s display screen.

dial location. Press

to dial the speed dial

number. (See “Assigning Speed Dial

Numbers” on page 81.)

To initiate an option, press the corresponding softkey.

ⅷ Save: Enter a seven-digit or ten-digit number (phone

number and area code) and press Save (

) to

save the phone number in your Contacts. (See

“Saving a Phone Number” on page 35.)

Section 2A. Device Basics

Your device notifies you of incoming calls in the

following ways:

To speed dial a phone number from standby mode,

press and hold the speed dial number. If the speed

dial number is two digits, enter the first digit, and then

press and hold the second digit. (For information on

setting up speed dial numbers, see “Assigning

Speed Dial Numbers” on page 81.) (This feature will

not work when you are roaming off the Sprint

National Network; when roaming you must dial using

eleven digits [1 + the area code + the seven-digit

phone number.])

Tip

ⅷ The device rings or vibrates.

ⅷ The indicator light flashes.

ⅷ The backlight illuminates.

ⅷ The screen displays an incoming call message

screen.

If the incoming call is from a number stored in your

Contacts, the associated name is displayed. If the

incoming caller is not stored in your Contacts list, only

the phone number is displayed. The caller’s assigned

image may also be displayed, if available.

Answering Calls

1. Make sure your device is on. (If your device is off,

incoming calls go to voicemail.)

For all incoming calls, the

following options are

displayed. To select an

option, press the

2. Press

to answer an incoming call.

– or –

Press Answer (left softkey). (Depending on your

settings, you may also answer incoming calls by

pressing any number key. See “Call Options” on

page 52. for more information.)

corresponding softkey.

ⅷ Answer to answer the

incoming call. (This is the

same as pressing

ⅷ Ignore to send the call to your voicemail box. (This is

the same as pressing .)

Section 2A. Device Basics

Making Calls from Call History

When your device is off, calls go directly to voicemail.

Note

1. Press Start > All Programs >Call History.

2. Use either the navigation key or thumbwheel to

scroll through the available list.

Ending a Call

ᮣ

Press

The previous two steps can be shortened by

Tip

Using Call History

pressing

from the Home screen to display a list of

recent calls.

When you place, accept, or miss a call, a record of the

call is saved in the Call History list. When you view the

numbers in this list, an icon to the left of the number

indicates the call type:

3. Highlight the number and press

Missed Call Notification

Dialed: Indicates all outgoing calls

made from your device.

When an incoming call is not answered, the missed

call icon ( ) is displayed at the top of your screen.

Missed: Indicates any missed calls.

To display a missed call entry from the ‘Frequently used’

menu:

Received: Indicates any received

calls that were answered.

1. Use the thumbwheel to scroll through the list of

frequently used applications.

2. With the missed call menu displayed, either press

or press and release the thumbwheel to

display the Call History list.

For more detailed information about the Call History,

see “Call History” on page 75.

Section 2A. Device Basics

To display a missed call entry from standby mode:

To exit Emergency mode:

1. Press to end a 911 call.

Ⅲ When calling a non-emergency number, you

1. Press Start > All Programs > Call History > Menu >

Filter > Missed Calls.

must press Yes (left softkey) to exit the Emergency

callback mode.

2. Select the missed call entry you wish to view. (To

call that number, press

Calling Emergency Numbers

When you are in Emergency mode, you can exit only

from the Alert menu.

Note

You can place calls to 911 (dial

), even if

your device is locked or your account is restricted.

To deactivate the Emergency callback mode:

1. Press to end a 911 call.

When you place an emergency call, your device

automatically enters Emergency mode and remains

in this mode until you manually exit.

Note

2. Call a non-emergency number.

3. Read the Alert notification screen.

During an emergency call, press Menu (right softkey) to

display your options. Select an option and press

4. Press Yes (left softkey) to exit the Emergency call

only mode and return to normal device operation

or No (right softkey) to remain in this mode.

ⅷ Speakerphone On to activate speaker device mode. (If

you are in speaker device mode, the option is

displayed as Speakerphone Off to deactivate.)

Press My Phone (left softkey) to display your phone

number during an emergency call.

Tip

Section 2A. Device Basics

ⅷ Mute/Unmute to toggle the onboard microphone’s

mute state (on/off).

Enhanced 911 (E911) Information

This device features an embedded Global Positioning

System (GPS) chip necessary for utilizing E911

emergency location services where available.

ⅷ Speakerphone On or Speakerphone Off to route the

device’s audio through the speaker or through the

earpiece.

When you place an emergency 911 call, the GPS

feature of your device seeks information to calculate

your approximate location. Depending on several

variables, including availability and access to satellite

signals, it may take up to 30 seconds or more to

determine and report your approximate location.

Ⅲ Select Speakerphone On to route the device’s audio

through the speaker. (You can adjust the speaker

volume using the volume keys on the side of the

device.)

Ⅲ Select Speakerphone Off to use the device’s

earpiece.

Always report your location to the 911

operator when placing an emergency call.

Some designated emergency call takers,

known as Public Safety Answering Points

(PSAPs) may not be equipped to receive GPS

location information from your device.

IMPORTANT

Because of higher volume levels, do not

place the device near your ear during

speakerphone use.

WARNING

ⅷ Turn Hands free On or Turn Hands free Off to toggle the

state of the Bluetooth hands free feature between on

or off.

In-Call Options

ⅷ Contacts to display your Contacts list.

Pressing Menu (right softkey) during a call displays a list

of available in-call features. To select an option, press

the corresponding keypad num ber or select the option

. The following options may be available

through the Options menu:

ⅷ Save to Contact to store the current phone number as

a new entry into your Contacts list.

ⅷ View Contact to view details (if caller has already been

saved to Contacts).

and press

Section 2A. Device Basics

ⅷ View Calendar to display your calendar entries.

Saving a Phone Number

ⅷ Call History to display Call History list.

Your device can store up to 12 phone numbers in each

of 10 Contacts entry types. Each entry’s name can

contain 255 characters. Your device automatically sorts

the Contacts entries alphabetically. (For more

information, see “Contacts” on page 80.)

During a call, the left softkey functions as the Mute

button. Press it to mute the device’s microphone for

privacy. Press it again to Unmute the device.

End-of-Call Options

To save a number from standby mode:

After you receive a call from or make a call to a phone

number that is not in your Contacts, the phone number

and the duration of the call are displayed. Press Save

(left softkey) to add the new number to your Contacts.

(See “Saving a Phone Number” below.)

1. Enter a phone number and press Save (left

softkey).

2. Select <New Contact> and press

3. Use the keypad to enter a first and last name for

the new contact name. (You can also choose to

update the number at this time.)

After you receive a call from or make a call to a phone

number that is already in your Contacts, the entry

name, phone number, and the duration of the call are

displayed.

4. Use the navigation key to select a number type for

the new contact from one of the following entries:

Ⅲ Mobile

Ⅲ Work

ᮣ

Press Menu > View Contact to view the Contacts

information for the number.

Ⅲ Home

The End-of-Call options are not displayed for calls

identified as No ID or Restricted.

Note

Ⅲ Work 2

Ⅲ Home 2

Ⅲ Company

Section 2A. Device Basics

Ⅲ Pager

Ⅲ Car

Ⅲ Assistant

Ⅲ Radio

Plus (+) Code Dialing

When placing international calls, you can use Plus

Code Dialing to automatically enter the international

access code for your location (for example, 011 for

international calls made from the United States). This

key can also be assigned, not only an International

prefix such as 011, but also a Country code and City

code. See “Assigning an International Country Code”

on page 53.

5. Select Save.

Finding a Phone Number

You can search Contacts

entries for phone numbers

that contain a specific

string of numbers.

1. Press and hold

until a “+” is displayed on your

device’s display screen.

1. Enter one or more

2. Dial the country code and phone number you’re

digits in standby

calling, and press

. (The access code for

mode. (Only numbers

matching your entry

are displayed. The more numbers you enter, the

more specific the search becomes.)

international dialing will automatically be dialed,

followed by the country code and phone number.)

Ⅲ Although your current Contacts list is displayed in

alphabetical order, any recent numbers matching

the criteria are displayed.

2. To dial the number, press

Section 2A. Device Basics

Dialing From the Contacts List

You can store a total of 89 numbers into speed dial

locations. Numbers 0, 1, and all digits ending in 0 (10,

20, 30, etc.) are reserved and cannot be overwritten.

Speed dial 1 is reserved for quick access to

Voicemail.

Note

1. Press Contacts (right softkey) to list the entries.

2. Use the thumbwheel to scroll through the list of

available contacts and select the entry you want to

call.

To use One-Touch Dialing for speed dial locations 2–9:

3. Press

to dial the entry’s default phone number.

ᮣ

Press and hold the appropriate key for

approximately two seconds.

– or –

To dial another number assigned to the contact

entry, select the name and press , and then

select a number and press

Ⅲ If a number has been assigned to the current

number, the display confirms that the number has

been dialed when it shows “Calling...”.

Using Speed Dialing

Ⅲ If an application has been assigned to the

number, the corresponding application will

launch. Assigning an Application to a Speed Dial

Location.

You can store up to 89 numbers in your device’s speed

dial memory to make contacting friends and family as

easy as pressing a button or two. With this feature, you

can dial speed dial entries using one keypress for

locations 2–9 or two keypresses for locations 11–99.

To use Two-Touch Dialing for speed dial locations 11–99:

1. Press the first digit.

2. Press and hold the second digit for approximately

two seconds. The display confirms that the number

has been dialed when it shows “Calling...”.

Section 2A. Device Basics

Speed dialing is not available when you are roaming;

when you are roaming off the Sprint National

Network, you must always dial using eleven digits

(1 + area code + number).

The

key can also be used to quickly launch up to

Note

four user-defined features or applications. See

“Customizing the Function Key” on page 60.

To manage all of your speed dial entries, press Start >

All Programs >Accessories > Speed Dial.

Function: Allows you to use characters

displayed at the top of the QWERTY

keys. Examples: $, @, #, ?

Ⅲ See “Using Speed Dial” on page 61.

CAPS/SHIFT: Converts the alphabetic

character into uppercase. Changes the

text input mode to Upper/Lower case

mode.

Entering Text

Selecting Characters

Symbol: Launches the Symbols page

from where you choose from an

extensive list of symbols and other

character sets.

Your device provides convenient ways to enter words,

letters, punctuation, and numbers whenever you are

prompted to enter text (for example, when adding a

Contacts entry or when using Microsoft^®Outlook^®and

SMS Text Messaging).

Enter: Moves the insertion point to the

next line in a message.

The built-in keypad supports quick and easy text input,

just as you would when using a computer’s keyboard.

Delete Character: Deletes the previous

character, similar to the backspace key

on a computer keyboard.

1. When you display a screen where you can enter

text, use the keypad to enter different character

types:

Section 2A. Device Basics

2. Select one of the following character types:

2. Press the corresponding text keys.

Ⅲ Letters to enter the alphabetic characters

associated with each key on the keypad. (See

page 39.)

Ⅲ For example, to enter the word “Bill,” type the

keypad sequence below. If you make a mistake,

press

to erase a single character.

Ⅲ Numbers to enter numbers by pressing the

Ⅲ Press and hold

to erase an entire word.)

numbers on the keypad. (See page 40.)

Ⅲ Symbols to enter symbols and “emoticons.” (See

page 40.)

Ⅲ My Text to enter preprogrammed messages.

(See page 40.)

Ⅲ To enter all uppercase characters, press

before each letter.

The keypad provides dual-use keys labeled with

alphabetic characters on the lower half and numbers

and symbols on the upper half. Press the key

corresponding to the character you want to enter.

Entering Characters

BILL

Entering Uppercase and Lowercase Letters

1. Press

to make the next character uppercase.

Characters revert back to lowercase after the next

character is typed.

Section 2A. Device Basics

Entering Numbers

Entering Symbols and Preset Messages

The keypad can be used to enter numbers, letters, and

symbols. Although these keys default to text (letters),

Symbols can be entered from the keypad (using the

key) or from the Symbols page (accessed using

numbers can be input by using

the correct number key.

in conjunction with

the

key).

To enter symbols:

1. Press

to input the character on the top row of

the next key pressed.

1. Position the cursor where you want the symbol to

appear within your message.

2. Press the corresponding keys. (For example, to

enter “9:30,” you would use the keypad sequence

2. Press

and use the navigation key to highlight a

to insert the symbol into your

symbol. Press

below. If you make a mistake, press

single character. Press and hold

entire word.)

to erase a

to erase an

message. There are multiple pages of available

symbols.

Ⅲ Press Next (right softkey) to open the next page of

symbols.

Ⅲ Press Previous (left softkey) to return to the

previous page of symbols.

9:30

– or –

1. Position the cursor where you want the symbol to

appear within your message.

Section 2A. Device Basics

2. Press

and then press the key for the symbol

you wish to insert.

Ted@

To enter preset messages:

1. Position the cursor where you want to insert the

preset text into your message.

2. Press Menu > My Text.

3. Scroll to a preprogrammed message and

press

Preset messages (My Text) make composing text

messages easier by allowing you to enter predefined

text, such as “Meet me at,” or a customized preset

message of your own. (For more information on

preset messages, please see “Using Preset

Messages” on page 165.)

Note

Section 2A. Device Basics

Section 2B

Sound Settings

Ringer Types

Your Device’s Settings

Ringer types help you identify incoming calls and

messages. You can assign ringer types to individual

Contacts entries, types of calls, and types of messages.

There are five main sound categories available:

ࡗ

Sound Settings

Display Settings

Power Management

Location Settings

Call Options

ⅷ Ring Tone: assigns ring tones for incoming calls.

ⅷ Notification: assigns ring tones for categories such as

new email, new text messages, new voice messages,

and new instant messages.

Messaging Settings

TTY Use With Sprint Service

Device Customization

Using Speed Dial

ⅷ System Sound: assigns ring tones for system

categories such as Exclamations, Questions, and

Warnings.

ⅷ Keypad Tone: assigns a tone for use with keypad

presses.

You can customize your device to sound, look, and operate just

the way you want it to. This section describes how to

change your device’s settings to best suit your needs.

Take a few moments to review these options and to

adjust or add settings that are right f or you.

ⅷ Call Alert: assigns ring tones for call-specific activities

such as minute warning, connection, and signal

fade.

ⅷ R2VS: assigns a simulated audio effect to the sound

being routed through a connected headset.

Section 2B. Your Device’s Settings

Selecting Ringer Types for Voice Calls

Selecting Ringer Types for System Sounds

Your device provides a variety of ringer options that

allow you to customize your ring and volume settings.

These options allow you to identify incoming calls by

the ring.

1. Press Start > All Programs > Settings > Sounds >

System Sound.

2. Select Exclamation, Question, or Warnings.

3. Use your navigation key to scroll through the

available ringers. A sample ringer will sound as

you highlight each option.

1. Press Start > All Programs > Settings > Sounds > Ring

Tone.

2. Use your navigation key to scroll through the

available ringers. A sample ringer will sound as

you highlight each option.

4. Press Done (left softkey) to assign a ringer.

Adding a Music File to Your Ring Tones

3. Press Done (left softkey) to assign a ringer.

You can also add your own supported music file to the

Ring Tone list by using ActiveSync^®to copy your file to

the device’s Sounds folder. See “Creating a Custom

Ring Tone” on page 151.

Selecting Ringer Types for Message Notifications

1. Press Start > All Programs > Settings > Sounds >

Notification.

Selecting a Keypad Tone

2. Select New e-mail, New text message, New voice

message, or New instant message.

Your device offers a number of options for selecting the

audible tones accompanying a keypress.

3. Use your navigation key to scroll through the

available ringers. A sample ringer will sound as

you highlight each option.

1. Press Start > All Programs > Settings > Sounds >

Keypad Tone.

4. Press Done (left softkey) to assign a ringer.

Section 2B. Your Device’s Settings

2. Use your navigation key to scroll through the

available tones (default is Click). A sample tone will

sound as you highlight each option.

themselves. These enriching effects are especially

noticeable on digitally compressed audio formats such

as MP3 and WMA.

3. Press Done (left softkey) to assign a tone.

To utilize this feature, your device needs to be

connected to a headset via the Power/Accessory

Interface Connector.

Call Alert Notification

Your device can alert you with an audible tone when

you change service areas, once a minute during a

voice call, or when a call has been connected.

1. Press Start > All Programs > Settings > Sounds > R2VS.

2. Use your navigation key to scroll through the

available stereo settings.

1. Press Start > All Programs > Settings > Sounds > Call

Ⅲ Choose None (Mono), 3D Sound, or M-Theater.

Alert.

3. Press Done (left softkey) to assign a setting.

2. Select Minute beep, Connect tone, or Signal fade tone.

Assigning Sound Profiles

3. Select On or Off for each category and press Done

(left softkey).

Using profiles, you can adjust and customize device

tones for different events or environments and then

apply the settings as a group. The currently selected

profile is displayed in the upper-right section of the

Home screen.

Selecting an R2VS Setting

R2VS™ significantly enhances the quality of mono and

stereo audio by simulating stereo sound through a

connected headset, thereby creating improved

dynamics and bass performance. R2VS provides

panoramic three-dimensiona l audio that extends the

sound beyond the speakers or headphones

1. Press Start > All Programs > Settings > Profiles.

2. Select Normal, Silent, Vibrate, Outdoor, or Automatic

and press Done (left softkey).

Section 2B. Your Device’s Settings

Display Settings

You can quickly change the profile by briefly pressing

and then releasing the key. Select the profile you

want from the Quick List and press

You can quickly activate or deactivate the Silent

Tip

Configuring the Home Screen

profile by pressing and holding

screen.

from the Home

The Home screen is displayed on your device while in

standby mode. From here, you can view important

information for the day or messages at a glance. You

can also quickly switch to programs you’ve recently

accessed.

Customizing Sound Profiles

1. Press Start > All Programs > Settings > Profiles.

Quick

Device Icons

Launcher

2. Select the desired profile you want and press

Menu > Edit.

3. Use the navigation key (

) to change the

settings in each field. Available options may differ

depending on the selected profile.

Home

screen

4. When you have finished, press Done (left softkey).

Resetting a Sound Profile to Factory Default

1. Press Start > All Programs > Settings > Profiles.

2. Select the desired profile you want to revert and

press Menu > Reset to default.

3. Press Done (left softkey) complete the update.

Taskbar/Softkey

Section 2B. Your Device’s Settings

The standby mode displays the Home screen from

where you can:

Ⅲ Background image: Select an image to use as a

background image on the Home screen.

ⅷ Access your Contacts List

Ⅲ Time out: Specify the length of time the device

waits before returning the display to the Home

screen if the device is not used.

ⅷ Review upcoming appointments

ⅷ Access unread SMS (text messages), email, and

voicemail messages.

Setting the Home Screen Properties

ⅷ Launch the most recently accessed programs or

change the sound profile option (top of screen)

Customize your Home screen’s display appearance by

selecting a new appearance and layout.

ⅷ Access the Quick Launcher using the thumbwheel to

provide access to some common features such as

the Task Manager, Alarms, Calendar, and Edit menu.

1. Press Start > All Programs > Settings > Display > Home

Screen > Home screen layout.

2. Use the navigation key to select an option.

The Home screen can be quickly accessed from any

menu or screen by pressing

Display Screen” on page 17.

. See “Viewing the

3. Press Done (left softkey) to store the new selection

and return to the Home Screen.

ᮣ

Update the Home screen settings by pressing

Displaying the Recent Programs Screen

Start > All Programs >Settings > Display > Home Screen.

The following Home screen settings are available:

The Recent Programs screen displays up to eight of

the most recently accessed applications. These

applications are also displayed as a row of icons at the

top of the Home screen.

Ⅲ Home screen layout: Select the layout to be used for

the Home screen.

Ⅲ Color scheme: Select the color scheme to be used

for the Home screen.

1. Press Start > All Programs > Settings > Display > Home

Screen.

Section 2B. Your Device’s Settings

2. Use the navigation key to highlight the “Show

3. Press Done (left softkey) to assign the color scheme

Recent Programs” field and press

check box.

to select the

and return to the previous screen.

Changing the Display Screen Wallpaper

Ⅲ Removing the check mark turns off the Recent

Programs screen.

Choose what you see on the display screen while in

standby mode. This selected image is displayed as the

Home screen background image. The image can be

chosen from either the default set or from a My Pictures

folder.

Ⅲ When this box is checked, you will see a Recent

Programs screen after pressing Start .

● In order to continue to your menu applications

from the Home page, you would need to press

All Programs (left softkey) to access the full Start

menu. (See “Selecting Menu Items from the

Main Menu” on page 28 for more details.)

1. Press Start > All Programs > Settings > Display > Home

Screen > Background image.

If you delete the default display image, the Home

screen layout may not work properly.

Note

The procedures in this guide are described with this

feature turned on (active).

Note

2. Use the navigation key to select an image. The list

is sequential and includes a listing of any stored

images (both on the device and within the optional

memory card).

Changing the Color Scheme

Customize your device’s display appearance by

selecting a color scheme to reflect your personality.

3. Press Done (left softkey) to assign the image and

return to the previous screen.

1. Press Start > All Programs > Settings > Display > Home

Screen > Color scheme.

2. Use the navigation key to select an option.

Section 2B. Your Device’s Settings

Setting the Time-out Properties

Start menu

Choose the time delay before the Home screen turns

off.

1. From standby mode, press Start > All Programs >

Settings > Display > Home Screen > Time out.

2. Use the navigation key to select an option.

3. Press Done (left softkey) to assign the time-out

value and return to the previous screen.

Selecting the Start Menu Style

The Home screen provides access to the start menu

using the Windows taskbar’s Start button.

Grid style

List style

1. From standby mode, press Start > All Programs >

Settings > Display > Start Menu Style.

2. Select Grid or List and press Done (left softkey).

If your device is set to Grid view (default

setting), you can scroll through All Programs

simply by pressing the navigation key down.

However, in List view, you may need to press

More (left softkey) one or more times to find a

particular program.

Important

Section 2B. Your Device’s Settings

Ⅲ Choose Never, 5 seconds, 10 seconds, 15 seconds,

30 seconds, or 60 seconds.

Power Management

2. Press the navigation key left or right to select a new

You can conserve battery power by adjusting the time

out settings for the display, keypad, display backlight or

adjusting the display brightness.

time out setting and press Done (left softkey).

Long backlight time-out settings reduce the battery’s

talk and standby times.

Note

Another new feature is the use of the Task Manager

that allows to more effectively manage battery life by

determining memory and processor usage by

manually turning off any unused applications. This

section also provides you with an additional indication

of your current main battery charge level.

Changing the Display Time-Out

Select the length of time the display stays on while on

either a direct connection to a power supply or when

functioning off battery power.

Reviewing the Battery Charge Level

1. From the standby mode, press Start > All Programs >

Settings > Power Management > Display time out on AC

or Display time out on Battery.

ᮣ

From the standby mode, press Start > All Programs >

Settings > Power Management.

Ⅲ During standby, the device goes into sleep mode

after a specified period of time to conserve power.

Choose Never, 10 seconds, 15 seconds, 30 seconds,

1 minute, 2 minutes, 5 minutes, or 10 minutes.

Changing the Backlight Time-Out

Select the length of time the display backlight stays on

when you do not use the device.

2. Press the navigation key left or right to select a new

time-out setting and press Done (left softkey).

1. From the standby mode, press Start > All Programs >

Settings > Power Management > Backlight time out.

Section 2B. Your Device’s Settings

Changing the Brightness

Restricting the Keypad Backlight Time-Out

Adjust your screen’s brightness to suit your

surroundings.

By default, the keypad backlight time-out is enabled all

the time. With this setting you can restrict the time of

day that the keypad backlight time-out will be enabled.

For example, if you were planning a day at the beach

(when you would not need the keypad backlight), you

could disable the backlight time-out for that period.

1. From the standby mode, press Start > All Programs >

Settings > Power Management > Display brightness.

Ⅲ Adjust the brightness level for the display.

Choose Level 1 - Level 5.

1. From the standby mode, press Start > All Programs >

Settings > Power Management > Keypad backlight on.

2. Press the navigation key left or right to select a new

level setting and press Done (left softkey).

2. Choose Any time (default) or Custom time. If you wish

to set a custom time, enter new start and end times

using the 24-hour time format (0000 - 2400), and

press Done (left softkey). The backlight will be

enabled only during the start and end time that

you have set.

Changing the Keypad Backlight Time-Out

Select the length of time the keypad backlight stays on

when you do not use the keys.

1. From the standby mode, press Start > All Programs >

All Programs >Settings > Power Management > Keypad

backlight time out.

Ⅲ Choose 1 second, 2 seconds, 3 seconds, 4 seconds,

5 seconds, or 10 seconds.

2. Press the navigation key left or right to select a new

time-out setting and press Done (left softkey).

Section 2B. Your Device’s Settings

Using the Task Manager

Location Settings

Free up memory by closing applications that you are

not using.

Your device is equipped with a Location feature for use

in connection with location-based services.

1. Press and hold

The Location feature allows the network to detect your

position. Turning Location off will hide your location

from everyone except 911.

– or –

Press

Manager, and press

to access the Quick List, select Task

Turning Location on will allow the network to detect

your position using GPS technology, making some

Sprint applications and services easier to use.

Turning Location off will disable the GPS location

function for all purposes except 911, but will not hide

your general location based on the cell site serving

your call. No application or service may use your

location without your request or permission. GPS-

enhanced 911 is not available in all areas.

Note

2. Use the navigation key to highlight an application

from the list. (The Task Manager screen lists the

amount of memory in MBs and processor usage

as a percentage.)

3. Press End Task (left softkey) to end the application.

(This frees up both the available memory and

processing capability.)

The more applications running on your device, the

faster your battery power is depleted.

Note

To enable your device’s Location feature:

1. From the standby screen, press Start > All Programs

>Settings > More... > More... > Other Settings > Location.

(The Location disclaimer will be displayed.)

2. Read the disclaimer and press OK (left softkey).

Section 2B. Your Device’s Settings

3. Select Location on or 911 calls only and press Done

(left softkey).

The voicemail number is automatically set when you

receive your device. You should not need to change

it unless otherwise instructed by Sprint.

Note

When the Location feature is on, your device’s standby

screen will display the

911 calls only, the

instance, the location feature is only enabled while in a

911 call so that emergency personnel can locate you

during an emergency.

icon. When Location is set to

icon will be displayed. In this

ⅷ International code to set up a standard international

long distance prefix.

To access the Call Options menu:

ᮣ

From the standby screen, press Start > All Programs

> Settings > Phone > Call Options.

Call Options

Setting Any Key Answer

You can customize settings related to call functions.

Although your current phone number is displayed, it

cannot be changed in this menu. Call options allow

you to change the following settings:

Select how to answer incoming calls on your device:

whether you want to be required to press either

any number key.

ⅷ Auto answer to set how quickly incoming calls are

automatically answered by the optional hands-free

car kit or earphone.

When this option is enabled, you can answer incoming

calls by pressing any key, except for the following:

ⅷ Any key answer to set up how you answer incoming

calls.

ⅷ Voice mail number to set up the call-in number for your

assigned voicemail server.

Section 2B. Your Device’s Settings

To enable Any key answer:

Reviewing Your Voicemail Number

1. From the standby screen, press Start > All Programs

During the initial system setup, the device automatically

detected and set your voicemail number. If this field is

blank, you can manually enter the number obtained

from Sprint Customer Service.

> Settings > Phone > Call Options.

2. Use the navigation key to highlight the “Any key

answer” field and press

box.

to select the check

Although this field is editable, it is not recommended

that this number be altered.

Note

Auto Answer Mode

You may set your device to automatically pick up

incoming calls when connected to an optional hands-

free car kit or headset.

Assigning an International Country Code

You can enter a frequently used country code that will

be entered when plus code dialing is used. The Plus

Code Dialing Key ( ) automatically dials the

international access code for the country in which you

are located.

To enable or disable auto-answer mode:

1. From the standby screen, press Start > All Programs

>Settings > Phone > Call Options > Auto Answer.

Ⅲ Choose Never, 2 seconds, 4 seconds, 6 seconds,

8 seconds or 10 seconds.

This field allows you to prepend multiple dialing codes

to a number. This can be useful for long distance

dialing where the international prefix, country code, and

city code are already stored on the device.

Ⅲ Assigning a time causes all calls to be

automatically answered when the device is

connected to a hands-free car kit or a headset

(sold separately).

2. Press the navigation key left or right to select a new

time setting and press Done (left softkey).

Section 2B. Your Device’s Settings

To enable the International Country Code:

Messaging Settings

1. From the standby screen, press Start > All Programs

> Settings > Phone > Call Options > International code.

Staying connected to your friends and family has never

been easier. With your device’s advanced messaging

capabilities, you can send and receive many different

kinds of text messages without placing a voice call.

(For more information, see “Using SMS Text

Messaging” on page 160.)

2. Use the keypad to enter an international country

code and press Done (left softkey).

Ⅲ When using Plus Code Dialing, the international

code defaults to the code for the country you are

currently in, but when a value is entered in this

field, all international calls begin with this new

value. This new value supersedes the default

International code.

Messaging settings make text messaging easier by

letting you decide how you would like to be notified of

new messages, create a signature with each sent

message, and create your own preset messages.

Ⅲ As an example, if this field contained: 01159399,

then whenever you pressed

would appear onscreen and then you would

simply key in the local phone number.

, these numbers

Accessing SMS Message Settings

1. From the standby screen, press Start > All Programs

> Messaging.

3. Press Done (left softkey).

2. Use your navigation key to select Text Messages and

press Select (left softkey) to launch the Text

Messages menu.

3. Press Menu > Tools > Options.

Section 2B. Your Device’s Settings

Setting Message Sending Options

Configuring Message Display Settings

1. From the standby screen, press Start >

All Programs > Messaging > Text Messages.

1. From the standby screen, press Start >

All Programs > Messaging > Text Messages.

2. Press Menu > Tools > Options > Sending.

2. Press Menu > Tools > Options > Display.

3. Use the navigation key to highlight a field:

Ⅲ Include copy of original message when replying to

e-mail

Ⅲ Save copies of sent items places a copy into the Sent

folder.

3. Use your navigation key to make the appropriate

selections.

Ⅲ Show date and time in the message list places

additional date and time information into the

message display.

4. Press Done (left softkey) to check the box.

Ⅲ Sort messages by provides different sorting criteria

for those messages currently in the message list:

To access the Messaging Settings menu, you can

also press Start > All Programs > Messaging >

Menu > Settings.

Tip

● Choose from either: Date received, Subject,

Sender or Message type.

● Choose from either: Descending or Ascending.

Adding a Customized Signature

Ⅲ After deleting or moving a message lets you set one of

the following options: Show next message, Show

previous message, or Return to message list.

Add a customized signature to each message you

send.

4. Press Done (left softkey) to update these display

1. From the standby screen, press Start >

All Programs > Messaging > Text Messages .

settings.

2. Press Menu > Tools > Options > Signatures.

Section 2B. Your Device’s Settings

3. Select either Text Messages or Outlook E-mail to

assign which message category will use the

configured signature.

To add a preset message to a text message:

1. While the message is open, position the cursor to

where you would like the preset message to go.

4. Highlight the “Use signature with this account” field

2. Press Menu (right softkey) > My Text.

and press

to check the box. (If you do not wish

to attach a signature to your outgoing messages,

do not check the “Use signature with this account”

field.)

3. Highlight a message to insert, and press Insert

(left softkey).

To edit a preset message:

5. Highlight the “Include when replying and

ᮣ

Select an existing preset message and press Menu

forwarding” field and press

to check the box.

> Edit My Text and use the keypad to edit or replace

(This adds the signature to your outgoing

messages.)

the message and press

on page 38.)

. (See “Entering Text”

6. Enter a signature and press Done (left softkey).

(See “Entering Text” on page 38.)

To delete a preset message:

1. Select a preset message and press Menu (right

softkey) > Edit My Text. (The entire message is

highlighted.)

Using Preset Messages

Preset messages make sending text messages to your

friends, family, and co-workers easier than ever. My Text

messages lets you quickly insert commonly used

phrases into the body of a new message or a reply to a

message.

2. Press and hold

to delete the message.

3. Press Done (left softkey) to complete the deletion.

– or –

Press Cancel (right softkey) to cancel the deletion.

Section 2B. Your Device’s Settings

Updating Account Settings

Deleting Old Messages

You can request that a notification message be sent

back to your device when a message has been

successfully delivered and also that your callback

number will be attached to the message.

Delete individual messages you have read whenever

you like, or delete all old messages.

To delete read messages:

1. From the standby screen, press Start > All Programs

>Messaging > Text Messages.

1. From the standby screen, press Start > All Programs

>Messaging > Text Messages.

2. Select a message from the list and press Delete

2. Press Menu > Tools > Options > Account Settings.

(left softkey).

3. Use the navigation key to highlight a field and then

3. When prompted to confirm the deletion, press Yes

(left softkey).

press

to check the box.

Ⅲ Request delivery notifications launches an onscreen

pop-up message to notify you if the last outgoing

message was successfully delivered.

To empty previously deleted messages:

1. From the standby screen, press Start > All Programs

>Messaging > Text Messages.

Ⅲ Always send callback number provides additional

information to the outgoing message by attaching

the number used in the Callback number field.

2. Press Menu > Tools > Empty Deleted Items.

3. When prompted to confirm the deletion, press Yes

(left softkey).

4. Select the Callback number field, and if desired,

use the keypad to enter a new callback number.

Press and hold

numbers.

to delete the previous

5. Press Done (left softkey).

Section 2B. Your Device’s Settings

To turn TTY Mode on or off:

TTY Use With Sprint Service

1. From the standby screen, press Start > All Programs

> Settings > More... > More... > Other Settings > TTY.

A TTY (teletypewriter, also known as a TDD or Text

Telephone) is a telecommunications device that allows

people who are deaf, hard of hearing, or who have

speech or language disabilities, to communicate by

telephone.

2. Read the onscreen alert message and press OK

(left softkey).

3. Press the navigation key left or right to select a

setting and press Done (

Your device is compatible with select TTY devices.

Please check with the manufacturer of your TTY device

to ensure that it supports digital wireless transmission.

Your device and TTY device will connect via a special

cable that plugs into your device's headset jack.

Ⅲ Choose from TTY + Hear (HCO), TTY FULL,

TTY + Talk (VCO), or TTY OFF.

In TTY Mode, the device’s standby screen will display

the TTY icon. If TTY mode is enabled, the audio

quality of non-TTY devices connected to the headset

jack may be impaired.

Note

If this cable was not provided with your TTY device,

contact your TTY device manufacturer to purchase the

connector cable.

When establishing your Sprint service, please call

Sprint Customer Service via the state

Telecommunications Relay Service (TRS) by first

dialing

. Then provide the state TRS with

this number: 866-727-4889.

Section 2B. Your Device’s Settings

911 Emergency Calling

WARNING

Device Customization

Sprint recommends that TTY users make

emergency calls by other means, including

Telecommunications Relay Services (TRS),

analog cellular, and landline communications.

Wireless TTY calls to 911 may be corrupted

when received by public safety answering

points (PSAPs), rendering some

communications unintelligible. The problem

encountered appears related to TTY

equipment or software used by PSAPs. This

matter has been brought to the attention of

the FCC, and the wireless industry and the

PSAP community are currently working to

resolve this.

Customizing the Side Back-Clear Key

Settings

You can change the program

assigned to the side

Back-Clear key (

) when it

is pressed and held.

1. Press Start > All Programs >

Settings > More...> More... >

Key Settings > Side Key

Settings.

Ⅲ Pressing and releasing

either clears an entry or

takes you back to a previously active menu.

Ⅲ By default, pressing and holding launches the

camera mode.

2. Use your navigation key to assign a new

application and press Done (left softkey).

Section 2B. Your Device’s Settings

Customizing the Message Key

Customizing the Function Key

You can change the Message application assigned

when you press and release or press and hold the

Messaging key ( ). By default:

While in the Home screen, pressing and holding the

key in conjunction with other specified keys can

launch predefined applications or activate specific

functions.

ⅷ Pressing and releasing (“short press”) lets you

access the Text Message Inbox.

To show the list of customizable application hot keys:

ⅷ Pressing and holding (“long press”) activates the Text

Message Composer (for new messages).

1. Press Start > All Programs >Settings > More...>

More... > Key Settings > Fn Key Settings.

1. Press Start > All Programs >Settings > More... >

2. Press Show List to both display a list of four

predefined application buttons and their currently

associated application.

More... > Key Settings > Message Key Settings.

2. Use your navigation key to assign either Text

Messages Inbox or Outlook Email Inbox in the ‘(Short

press)’ field.

Ⅲ The W key is by default associated with the World

Clock application.

3. Use your navigation key to assign either Text

Messages Composer or Outlook Email Composer in the

‘(Long press)’ field.

Ⅲ The B key by default, will launch the Bluetooth

Settings menu.

Ⅲ The S key is by default associated with Service

Mode.

4. Press Done (left softkey) to store these settings and

return to the previous menu.

Ⅲ The F key by default, will launch the Fn Key

Settings menu.

Section 2B. Your Device’s Settings

To use the Fn key:

4. Press Done (left softkey) when you have finished

assigning hot keys.

1. From the Home screen,

press and hold

for a

Using Speed Dial

few seconds to activate

the onscreen Launch

Application window.

This pop-up indicates

the current application assignments of the four

available hot keys.

Assigning an Application to a Speed

Dial Location

Start menu applications can be set to launch when

activated by a speed dial keypress in the same way

that phone numbers can be assigned to a speed dial

key.

Ⅲ As an example, to quickly change the device’s

service mode from CDMA to GSM, press and

hold

, and then press

(in the default

setting).

To change the hot keys:

You can also assign email addresses or Web pages

to the number keys as speed dial entries.

Tip

1. Press Start > All Programs > Settings > More...>

More... > Key Settings > Fn Key Settings > Show List.

1. Press Start > All Programs.

2. Select one of the four buttons from the list and

2. Select a desired application from the Start menu

screen (or from available submenus), but don’t

press

3. From the Select an Item screen, use your

navigation key to choose an item and press

(This list is extensive and you should note that

there are many available options.)

Section 2B. Your Device’s Settings

3. Press Menu (right softkey) > Add Speed Dial.

To view the list of current Speed Dial assignments:

ᮣ

Press Start > All Programs >Accessories > Speed Dial.

Ⅲ This list displays both phone numbers and

applications that have been assigned a speed

dial location (from 2 -99).

To delete a current Speed Dial assignment:

1. Press Start > All Programs > Accessories > Speed Dial.

2. Select a speed dial entry and press Menu (right

softkey) > Delete.

4. Use the keypad to assign a descriptive name

within the Name field (or accept the default).

3. Confirm the deletion by pressing Yes (left softkey)

or cancel by pressing No (right softkey).

5. In the Keypad assignment field, select an available

speed dial location for the application.

Configuring the Time and Date

Keypad numbers 0, 1, and all digits ending in 0 (10,

20, 30, etc..) are reserved and cannot be overwritten.

Speed dial 1 is reserved for quick access to

Voicemail services.

Note

The Date and Time settings enable you to either

manually set the date, time, and time zone or to allow

the device to automatically update the information over

the Sprint network.

6. Press Done (left softkey) to finish assigning the

speed dial.

1. Press Start > All Programs > Settings > More... >

Date and Time.

2. Select your time zone and set the current date and

time.

Section 2B. Your Device’s Settings

3. Set the Time setting and Time zone setting fields to

either Manual or Auto.

If you changed a language or locale setting, after

pressing Done you will need to turn the device off

and then back on again for your changes to take

effect.

Note

Ⅲ Manual requires the information to be updated by

the user.

Ⅲ Auto obtains the time and date information from

the network.

To change from English to

Spanish:

4. Press Done (left softkey) to complete the setup

process.

1. Press Start > All Programs >

Settings > More... > More... >

Regional Settings.

Configuring the Regional Settings

This menu allows you to change the way some data is

formatted and displayed on the device such as

language, locale, date styles, and currency and time

formats appropriate to your current location.

2. In the ‘Language’ field,

select Español and press

Done (left softkey).

3. Press OK (left softkey) to

acknowledge the change

in the language.

1. Press Start > All Programs > Settings > More... >

More... > Regional Settings.

2. Select the fields for any categories you wish to

change and then press the navigation key left or

right to change settings.

4. Press and hold

two seconds until you see the powering down

animation on the display screen.

for

Ⅲ When the device restarts, Spanish menus will be

displayed.

3. Press Done (left softkey) to complete the setup

process.

Section 2B. Your Device’s Settings

To change from Spanish to English:

ᮣ

Repeat steps 1 – 4, this time selecting US English in

the ‘Language’ field.

Section 2B. Your Device’s Settings

Section 2C

Accessing the Security Menu

All of your device’s security settings are available

through the Security menu.

Your Device’s Security

ᮣ

Press Start > All Programs > Settings > More... >

Security.

ࡗ

Accessing the Security Menu

Using Your Device’s Device Lock Feature

Using Special Numbers

Using Your Device’s Device

Lock Feature

Using Encryption

Managing Certificates

Resetting Your Device

Locking Your Device with a Password

Security Features for Data Services

When your device is locked, you can only receive

incoming calls or make calls to 911, Sprint Customer

Service, or special numbers. (See “Using Special

Numbers” on page 68.)

By using the security settings on your device, you receive peace

of mind without sacrificing flexibility. This section will

familiarize you with your device’s security settings. With

several options available, you can customize your

device to meet your personal needs.

When you lock your device, it requires a password to

return to normal operation. When a password is set up,

the device can be locked immediately or configured to

lock when the screen goes blank.

Section 2C. Your Device’s Security

1. Press Start > All Programs > Settings > More... >

Security.

Ⅲ Password: use the keypad to enter the desired

password.

Ⅲ Confirm password: use the keypad to re-enter the

same password.

2. Select Device Lock and press

3. Select “Prompt if device unused for” and press

. (Enabling this option activates the remaining

fields.)

5. Press Done (left softkey) > Yes (left softkey) to store

these settings.

4. Select each field and enter the required

Unlocking Your Device Using a Password

information:

Once the preset time has expired, the display screen

will dim and the taskbar Start option is replaced with

Unlock.

Ⅲ Time: select the amount of unused time (idle)

required before you are prompted for a password.

Ⅲ Password type: to choose from one of the following

PIN types:

1. From standby mode, press Unlock.

2. Enter your password using the keypad.

3. Press Unlock.

●

Simple PIN: must be at least four characters in

length and cannot contain a simple sequence

such as 000, 1111, or 1234.

Changing the Device Lock Code

●

Strong alphanumeric: must be at least seven

characters in length and must contain at least

one character from each of the following

categories: uppercase/lowercase letters,

numerals, symbols. Examples of strong

alphanumeric passwor ds are sb?8A!3 and

%$VH5hW.

1. Press Start > All Programs >Settings > More... >

Security.

2. Select Device Lock and press

3. Enter your password using the keypad.

4. Press Unlock.

Section 2C. Your Device’s Security

5. Navigate to the Password field and then to the

Confirm password field, pressing and holding

in each field to delete the current password

information.

5. Select “Prompt if device unused for” and press

. (This action removes the check mark from this

option and disables the device lock feature.)

6. Press Done (left softkey) > Yes (left softkey) to store

the new settings.

6. Enter your new password within both fields and

when prompted, re-enter your new lock code.

Manually Locking Your Device

7. Press Done (left softkey) to store the new password.

This manual process

temporarily locks the device

without the need to enter a

password.

Removing the Device Lock

1. Press Start > All Programs > Settings > More... >

Security.

You can still receive calls,

but you cannot make calls or

use the keypad.

2. Select Device Lock and press

If you can’t recall your lock code, try using the last

four digits of your wireless phone number. If this

doesn’t work, call Sprint Customer Service at 1-888-

211-4727.

Tip

1. Press

to activate the

Quick List menu. (This

menu allows you to

quickly turn the device

off, access the Wireless

Manager, lock the device, or activate sound

profiles.)

3. Enter your password using the keypad.

4. Press Unlock.

Section 2C. Your Device’s Security

2. Select Lock and press

. (The display screen

dims and the Unlock option now appears in the

Using Special Numbers

taskbar.)

Special numbers are important numbers that you have

designated as being “always available.” You can call

and receive calls from special numbers even if your

device is locked.

– or –

ᮣ

Press and hold

Manually Unlocking the Device

You can save up to three special numbers in addition

to your Contacts entries (the same number may be in

both directories).

ᮣ

Press Unlock (left softkey) and then immediately

press . (This removes the manual lock and

allows you to fully utilize the device and all its

features.)

To add or replace a special number:

1. Press Start > All Programs >Settings > More... >

Security.

Calling in Lock Mode

You can place calls to 911 and to your special

numbers when in lock mode.

2. Select Emergency Numbers and press

3. Select a location for your entry.

ᮣ

To call an emergency number, special number, or

Sprint Customer Service, enter the phone number

4. Enter the number and press Done (left softkey).

and press

5. Read the Alert message and press Yes (left softkey)

to activate a soft reset of your phone or No (right

softkey) to cancel the operation.

There are no speed dial options associated with

special numbers.

Note

Section 2C. Your Device’s Security

2. Select Certificates and press

. From this screen,

you can manage the following certificate types:

Using Encryption

Ⅲ Personal: Used to identify yourself to others.

The encryption feature is used with files stored on the

optional microSD™ card to make them readable only

on your device.

Ⅲ Intermediate: Used to identify intermediate

certification authorities. (Intermediate certificates

are issued by the trusted root certificate authority,

and any SSL [secure sockets layer] certificates

then issued by the intermediate certificate will

inherit the trust of the trusted root.

To encrypt files stored on a microSD card:

1. Press Start > All Programs > Settings > More... >

Security.

Ⅲ Root: Used to identify root certification authorities.

(A root certificate is the top-most certificate of the

certificate tree. All certificates below the root

certificate inherit the trustworthiness of the root

certificate.)

2. Select Encryption and press

3. Press to enable the encryption option and then

press Done (left softkey).

Managing Certificates

3. Select the encryption option and press

the certificate information.

to see

You can add and delete public key certificates. Three

types of certificates can be created.

To delete a certificate:

1. Press Start > All Programs > Settings > More... >

Security.

To access information about different certificate types:

1. Press Start > All Programs > Settings > More... >

2. Select Certificates and press

Security.

3. Select any of the three available ce rtificates and

press

to reveal a list of related certificates.

Section 2C. Your Device’s Security

4. Select an entry from the list and press Menu >

Ⅲ After the device restarts, you may have to press

Next (right softkey) and reconfigure basic settings

such as the time and date (page 62) and the

password (page 65).

Delete.

Ⅲ After selecting Delete, the certificate is disabled by

default.

5. Read the disclaimer and press OK (left softkey).

Security Features for Data Services

Resetting Your Device

Enabling and Disabling Data Services

Resetting the device restores all the factory defaults,

including the ringer types and display settings. The

Contacts list, call history, scheduler, and messaging are

not affected.

You can disable data services without turning off your

device; however, you will not have access to all data

services, including Web and messaging. Disabling

data services will avoid any charges associated with

using those services. While signed out, you can still

place or receive device calls, check voicemail, and use

other voice services. You may enable data services

again at any time.

1. Press Start > All Programs > Settings > More... >

Security.

2. Select Phone Reset and press

3. Enter the lock code and press Done (left softkey).

4. Read the disclaimer and press OK (left softkey).

Ⅲ The device will restart and all current data stored

on the device will be deleted. This reset process

does not affect the data stor ed on the microSD

card.

Section 2C. Your Device’s Security

To update your data services information:

If you are unable to make an outgoing due to a

current data call in session (indicated by an “Unable

to Vision while a data call is in progress” message),

use the Wireless Manager to turn the phone off and

on again, and then press Done (left softkey). This

refreshes the phone and enables data services.

Note

1. Press Start > All Programs > Accessories > Vision >

Menu (right softkey)> Update Profile.

2. Read the confirmation screen and press Yes (left

softkey) to enable the service and begin the

update process using your remote vision

information.

Without data services enabled, you will be unable to

wirelessly sync your device to a remote email server

(page 144).

To enable data services:

1. Press Start > All Programs > Accessories > Vision >

Menu (right softkey).

2. Select Enable Vision and press

3. Read the disclaimer and press Yes (left softkey) to

enable the service. (A message indicating the

progress of the activation is displayed. The Status

field then displays “Vision Enabled.”)

Section 2C. Your Device’s Security

Section 2D

Understanding Roaming

Recognizing the Roaming Icon on the Display

Screen

Roaming

Your device’s Home screen always lets you know when

you’re off the Sprint National Network. Anytime you are

ࡗ

Understanding Roaming

Setting Your Device’s Roam Mode

roaming, the device displays the roaming icon (

and extra charges may apply when making or

receiving a call.

)

Roaming is the ability to make or receive calls when you’re off

the Sprint National Network. Your new Samsung ACE^TM

works anywhere on the Sprint National Network and

allows you to roam on other 1900 and 800 MHz digital

networks where we’ve implemented roaming

agreements with other carriers.

Remember, when you are using your device off the

Sprint National Network, always dial numbers using

11 digits (1 + area code + number).

Tip

Roaming on Other Digital Networks

This section explains how roaming works as well as

special features that let you manage your roaming

experience.

When you’re roaming on digital networks, your call

quality and security will be similar to the quality you

receive when making calls on the Sprint National

Network. However, you may not be able to access

certain features, such as data services, depending on

the available network.

Section 2D. Roaming

Setting Your Device’s Roam Mode

If you’re on a call when you leave the Sprint National

Network, your call is dropped. If your call is dropped

in an area where you think Sprint service is available,

turn your device off and on again to reconnect to the

network.

Note

Your device allows you to control your roaming

capabilities. Your device has a way of alerting you

when you are roaming off the Sprint National Network:

the onscreen roaming icon. By using the Roaming

menu option, you can determine which signals your

device accepts, and which network you will use.

Checking for Voicemail Messages While

Roaming

Enabling the Roaming Option

When you are roaming off the Sprint National Network,

you may not receive automatic on-device notification of

new voicemail messages. Callers can still leave

messages, but you will need to periodically check your

voicemail for new messages if you are in a roaming

service area for an extended period of time.

Choose from three different settings on your device to

control your roaming experience.

1. Press Start > All Programs > Settings > More... >

Roaming.

2. Use the navigation key to select an option in the

1. Dial 1 + area code + your phone number.

‘Roaming option’ field and press Done (left softkey).

2. When you hear your voicemail greeting, press

Ⅲ Sprint Only to access the Nationwide Sprint PCS

Network only and prevent roaming on other

networks.

3. Enter your passcode at the prompt and follow the

voice prompts.

When you return to the Sprint National Network,

voicemail notification will resume as normal.

Section 2D. Roaming

Ⅲ Roaming Only to seek a roaming system only. The

previous setting (Sprint Only or Automatic) is

restored the next time the device is turned on.

To set your Data Roam Guard notification:

1. Press Start > All Programs >Settings > More... >

Roaming > Data roam guard.

Ⅲ Automatic to seek service on the Sprint National

Network. When Sprint service is unavailable, the

device searches for an alternate system.

2. Use the navigation key to select an option in the

‘Data roam guard’ field and press Done (left

softkey).

Enabling the Data Roam Guard

Ⅲ Always Ask sets your phone’s Data Roam Guard

feature on. You will see a prompt and will be

required to respond anytime you access data

services while roaming.

Depending on service availability and roaming

agreements, your phone may be able to access data

services while roaming on certain digital systems. You

can set your phone to alert you when you are roaming

off the Sprint National Network and try to use data

services such as messaging.

Ⅲ Never Ask turns your phone’s Data Roam Guard

feature off. You will not be notified of your roaming

status when accessing data services.

To use data services when Data Roam Guard is active:

Data Roam Guard is turned off by default on your

device.

Note

ᮣ

When a pop-up notification appears informing you

that data roam charges may apply, select Roam

(left softkey) to connect.

Section 2D. Roaming

It is continually updated as new numbers are added to

the beginning of the list and the oldest entries are

removed from the bottom of the list. When you view the

numbers in this list, an icon to the left of the number

indicates the call type:

Section 2E

Call History

Dialed:In d ic a te s a llo u tg o in g c a lls

made from your device.

ࡗ

Viewing History

Call History Options

Received: Indicates any received

calls that were answered.

Making a Call From the Call History

Saving a Phone Number From Call History

Deleting Call History Entries

Missed: Indicates any missed

calls. These are routed to your

voicemail.

The Call History keeps track of incoming calls, outgoing calls,

and missed calls. This section guides you through

accessing and making the most of your Call History.

Each entry contains the phone number (if it is

available) and the Contacts entry name (if the phone

number is in your Contacts).

Viewing History

Accessing Call History

Call History is a list of recent phone numbers (or

Contacts entries) for calls you placed, accepted, or

missed. Call History makes redialing a number fast and

easy.

1. Press Start > All Programs > Call History.

2. Use either the navigation key or thumbwh eel to

scroll through the available list.

Section 2E. Call History

1. Access the Call History list.

The previous two steps can be shortened by

Tip

2. Press Menu (right softkey) to display the following

options:

pressing

from the Home screen to display a list of

recent calls.

Ⅲ Find Contact to find a contact entry matching the

selected phone number.

3. Highlight the number and press

Ⅲ Send Text Message to activate the Text Message

Composer (for a new message).

Ⅲ E-mail to activate the Microsoft Outlook^®

Call History records only those calls that occur while

the device is turned on. If a call is received while your

device is turned off, it will not be included in the

device’s Incoming or Missed call logs.

Note

Composer (for a new email message).

Ⅲ View Timers displays the recorded time for the

following categories.

If you return a call from the voicemail menu, it will not

be included in your device’s Outgoing call log.

●

Last call: call length for last outgoing call.

●

All calls: length of all incoming and outgoing

calls since the last reset of the timers

(page 77).

Call History Options

Select a Call History entry

●

Incoming calls: total time used for all incoming

calls.

and press

to display

the date and time of the

call, the phone number (if

available), and the caller’s

name (if the number is

already in your Contacts).

Outgoing calls: total time used for all outgoing

calls.

Roaming calls: total time used for all roaming

calls.

Section 2E. Call History

●

Data calls: total time used for all data

transmissions (calls).

Filtering Calls in Call History

1. Press Start > All Programs > Call History > Menu (right

softkey) > Filter. (This option filters the list to display

only those calls meeting your selected criteria.)

●

Last reset: shows most recent reset time.

Lifetime calls: total combined time used for all

of the above call types.

2. Select an option and press

Ⅲ Delete to delete the currently selected entry.

Ⅲ No Filter: all calls are displayed.

Ⅲ Delete List to delete all Call History entries.

Ⅲ Missed Calls: only calls which were not answered

are displayed.

Ⅲ Save to Contacts to save the number into your

Contacts list if it is not already stored. (See

“Saving a Phone Number From Call History” on

page 88.)

Ⅲ Incoming Calls: only calls that were answered are

displayed.

Ⅲ Outgoing Calls: only calls that were placed are

displayed.

Ⅲ Filter to restrict the list of entries that appear.

You can also view the next Call History entry by

pressing the navigation key down or view the

previous entry by pressing the navigation key up.

Tip

Resetting Timers from the Call History

1. Press Start > All Programs > Call History > Menu (right

softkey)> View Timers.

2. Press Menu > Reset Timers.

3. Read the disclaimer and press Yes (left softkey).

Section 2E. Call History

3. Use the keypad to type in the new entry's first and

last name. The device’s word prediction feature

may try to identify the word being typed.

Making a Call From the Call History

1. Press Start > All Programs > Call History.

4. Select a Number type from one of the following

categories (groups):

2. Select an entry (number or Contacts name) and

press

Ⅲ Mobile

Ⅲ Work

You cannot make calls from Call History to entries

identified as No ID or Restricted.

Note

Ⅲ Home

Ⅲ Work 2

Ⅲ Home 2

Ⅲ Company

Ⅲ Pager

Saving a Phone Number From

Call History

Ⅲ Car

The number of Contacts that can be stored on the

device is determined by the storage capacity. Each

Contacts entry can store up to a total of 10 phone

numbers, and each entry’s name can contain 255

characters.

Ⅲ Assistant

Ⅲ Radio

After you have saved the number, the new Contacts

entry is displayed in the alphabetical listing. (See

“Contacts Entry Options” on page 84.)

1. Select a Call History entry and press Save (left

softkey).

2. Select <New Contact> and pr ess

Section 2E. Call History

Deleting all entries in Call History:

You cannot save phone numbers already in your

Contacts or from calls identified as Unknown ID or

Restricted.

Note

1. Press Start > All Programs > Call History.

2. Press Menu (right softkey) > Delete List.

3. Read the disclaimer and if you are certain you

want to permanently delete the list of entries, press

Yes (left softkey).

Deleting Call History Entries

– or –

You can delete individual entries from Call History, or

you can delete all entries.

Press No (right softkey) to return to the previous

menu.

Deleting individual entries in Call History:

1. Press Start > All Programs > Call History.

2. Select an entry and press Menu (right softkey) >

Delete.

3. Read the disclaimer and if you are certain you

want to permanently delete the entry, press Yes (left

softkey).

– or –

Press No (right softkey) to return to the previous

menu.

Section 2E. Call History

Section 2F

Adding a New Contacts Entry

The number of Contacts entries that can be stored on

the device is determined by the storage capacity of the

device. Each Contacts entry can store up to a total of

10 phone numbers, and each entry’s name can

contain 255 characters.

Contacts

ࡗ

Adding a New Contacts Entry

Assigning Speed Dial Numbers

Finding Contacts Entries

1. Press Start > All Programs >Contacts > New.

2. Enter a name for the new entry. (See “Entering

Text” on page 38.)

Contacts Entry Options

Adding a Phone Number to a Contacts Entry

Editing a Contacts Entry’s Phone Number

Editing a Contacts Entry

3. Enter the phone number(s) for the entry.

4. Press Done (left softkey) to store the new entry into

the Contacts list.

Deleting Contacts

After you have saved the number, the new Contacts

entry is displayed. (See “Contacts Entry Options” on

page 84.)

Beaming a Contacts Entry

Selecting a Ringer Type for an Entry

Dialing Sprint Services

Your device’s Contacts list helps you stay in touch with family,

friends, and colleagues by keeping track of all their contact

information. This section explains how to use your

device’s Contacts list.

Section 2F. Contacts

To assign a speed dial number to a new phone number :

ICE – In Case of Emergency

Tip

1. Add a phone number to a new or to an existing

Contacts entry. (See “Adding a New Contacts

Entry” on page 80

or “Adding a Phone Number to a Contacts Entry”

on page 85.)

To make it easier for emergency personnel to identify

important contacts, you can list your local

emergency contacts using the word “ICE” at the

beginning of the entry’s name within your device’s

Contacts list. For example, if your mother is your

primary emergency contact, list her as “ICE–Mom” in

your Contacts list. To list more than one emergency

contact, use “ICE1–___,” “ICE2–___,” etc.

2. Select the new entry from the Contacts list and

press

. (This opens a details screen for the

selected entry.)

3. Press Menu (right softkey) > Add to Speed Dial and

Assigning Speed Dial Numbers

press

4. Edit the name using the keypad (if desired).

Your device can store up to 89 phone numbers in

speed dial locations. (For details on how to make calls

using speed dial numbers, see “Using Speed Dialing”

on page 37.) You can assign speed dial numbers

when you add a new Contacts entry, when you add a

new phone number to an existing entry, or when you

edit an existing number.

5. Select an available speed dial location (2 - 99) and

press Done (left softkey) to complete the speed dial

assignment. (A confirmation will be displayed.)

To assign a speed dial number to an existing phone

number:

1. From the Home screen, press Contacts

Numbers 0, 1, and all digits ending in 0 (10, 20, 30,

etc.) are reserved and cannot be overwritten. Speed

dial 1 is reserved for quick access to Voicemail.

Note

(right softkey).

2. Select an entry and press

Section 2F. Contacts

3. Select a number to assign to a speed dial location.

Finding Contacts Entries

4. Press Menu (right softkey) > Add to Speed Dial and

press

There are several ways to display your Contacts entries:

by name, by speed dial number, by group, and by

voice dial tags. Follow the steps outlined in the sections

below to display entries from the Contacts menu.

5. Select an available speed dial location (2 - 99) and

press Done (left softkey) to return to the details

page. (A confirmation will be displayed.)

6. Press Done (left softkey) to return to the Contacts

menu.

Finding Contacts by Name

1. Press Start > All Programs >Contacts.

– or –

If you attempt to assign an already in-use speed dial

location to a new phone number, a message will

appear asking if you wish to replace the existing

speed dial assignment. Press Yes (left softkey) to

assign the location to the new phone number and

delete the previous speed dial assignment.

Note

From the Home screen, press Contacts

(right softkey).

2. Scroll through all the entries.

– or –

To review a list of previously assigned speed dial numbers:

Enter the first letter of a name or part of a name

(such as “Dav” for “Dave”). (The more letters you

enter, the more your search narrows.)

ᮣ

Press Start > All Programs >Accessories > Speed Dial.

3. To display the details for an entry, select it and

press

Section 2F. Contacts

4. To dial the entry’s default phone number, press

Finding Entries by Category

– or –

To make the search process easier and quicker,

Contacts entries can be assigned to any or all of these

categories: Business, Holiday, Personal, and Seasonal.

To display additional Contacts entries, press the

navigation key up or down.

1. Press Start > All Programs > Contacts > Menu > Filter.

Finding Speed Dial Numbers

2. Select one of the available category types from the

1. Press Start > All Programs > Accessories > Speed Dial.

pop-up menu and press

to filter the current list

2. Scroll through speed dial entries. Speed dial

of Contacts. (If your category does not appear in

the list, select More... to display additional entries.)

numbers are displayed in numeric order.

– or –

Ⅲ All Contacts does not filter the Contacts list.

Enter the number of a speed dial location using

your numeric keypad.

Ⅲ Recent displays only the most recently added

contacts.

Ⅲ No Categories displays only entries that are not

assigned to a category.

3. To display the details of an entry, highlight it and

press

Ⅲ Business displays only entries that are assigned to

the Business category.

4. To dial the entry’s default phone number, highlight

the entry from the list and press

Ⅲ Holiday displays only entries that are assigned to

the Holiday category.

Ⅲ Personal displays only entries that are assigned to

the Personal category.

Section 2F. Contacts

Ⅲ Seasonal displays only entries that are assigned to

the Seasonal category.

ⅷ Send Contact [Beam] to send and receive information

wirelessly between your device and one or more

other Bluetooth-enabled devices.

Ⅲ More.. allows you to select multiple category types

and display only those entries that match.

ⅷ Copy Contact to create a duplicate of a Contacts entry.

ⅷ Delete Contact to permanently delete an entry.

3. To display an entry within the category, select it

and press

ⅷ Copy All to transfer a copy of all current contacts to

either the phone or to the SIM card, depending on

the original storage location of the selected entry.

4. To dial the entry’s default phone number, press

– or –

ⅷ View By to filter how entries are displayed (either by

Name [alphabetical] or by Company [user-defined]).

To dial another listed number:

Ⅲ Select the entry and press

ⅷ Delete All to permanently delete all Contacts entries

from either the device or the SIM card.

Ⅲ Select the phone number and press Call (left

softkey).

ⅷ Filter to display only entries matching a selected filter

category. See “Finding Entries by Category”

page 83.

Contacts Entry Options

You can view the next entry by pressing the

navigation key right or view the previous entry by

pressing the navigation key left.

Tip

To access a Contacts entry’s options, display the entry

and press Menu . Select an option and press

ⅷ Edit to add to or change a Contacts entry. (See

“Adding a New Contacts Entry” on page 80 or

“Adding a Phone Number to a Contacts Entry” on

page 85.)

Section 2F. Contacts

4. Re-enter or edit the number and press Done (left

Adding a Phone Number to a

Contacts Entry

softkey).

Editing a Contacts Entry

1. Display a Contacts entry. (See “Finding Contacts

Entries” on page 82.)

1. Display a Contacts entry.

2. Press Menu > Edit.

3. Select a phone number field, use the keypad to

enter the new number, and press Done (left

softkey).

3. Select the information you wish to edit (Name,

Group, Ringer, etc.), and use

to clear one

character at a time, or press and hold

the entire entry.

to erase

Editing a Contacts Entry’s Phone

Number

4. Add or edit the information using the keypad and

press Done (left softkey) to save the changes.

1. Display a Contacts entry. (See “Finding Contacts

Entries” on page 82.)

2. Press Menu > Edit.

3. Select a number to change, and use

one digit at a time, or press and hold

the entire number.

to clear

to erase

Section 2F. Contacts

Deleting Contacts

Beaming a Contacts Entry

You can quickly delete either individual entries or all

entries from your Contacts list. Contacts can be deleted

from either the device or from the SIM card.

You can send and receive information wirelessly

between your phone and up to two Bluetooth-enabled

devices. The following example shows how to transmit

Contacts entry information to another phone.

To delete a single contact:

1. Display a Contacts entry.

1. Press Start > All Programs >Contacts.

2. Press Menu > Send Contact > Beam. (The device will

search for other Bluetooth-enabled devices in

range.)

2. Select a contact from the list and press Menu >

Delete Contact.

3. Read the disclaimer and press Yes (left softkey).

3. Select a Bluetooth device from the list and press

Beam. (The recipient will then be given the option

to agree to save the contact to their own device.)

To delete all contacts:

1. Press Start > All Programs >Contacts > Menu >

Delete All.

Receiving a Beamed Contact:

2. Select either Phone or SIM and press

When receiving a Contacts entry from another device,

you will be prompted to accept the beamed

information.

3. Read the disclaimer and press Yes (left softkey).

ᮣ

Read the confirmation screen and press Done (left

softkey).

Section 2F. Contacts

Selecting a Ringer Type for an Entry Dialing Sprint Services

Assign a ringer type to a Contacts entry so you can

identify the caller by the ringer type. (See “Ringer

Types” on page 42.)

To dial a service from standby mode using your keypad:

1. Dial the appropriate service number:

Ⅲ Account Info. –

1. Display a Contacts entry.

Ⅲ Customer Service –

Ⅲ Sprint 411 –

2. Press Menu > Edit.

3. Scroll through available ringers in the Custom ring

tone field. (When you highlight a ringer type, a

sample ringer will sound.)

Ⅲ Sprint Operator –

2. Press

to place the call.

4. Select a ringer and press Done (left softkey) to save

the new ringer type.

Section 2F. Contacts

This section shows you how to use these features to

turn your device into a time management planner that

helps you keep up with your contacts, schedules, and

commitments.

Section 2G

Calendar and Tools

Using Your Device’s Calendar

ࡗ

Using Your Device’s Calendar

Using Your Device’s Alarm Clock

Using Your Device’s Notepad

Using Tasks

Adding an Event to the Calendar

Your Calendar helps organize your time and reminds

you of important events.

Managing Voice Memos

Using the Tip Calculator

Using the Calculator

1. Press Start > All Programs >Calendar.

2. Press the left softkey to cycle between Week, Month,

and Agenda (full-screen table calendar view).

Using the Smart Converter

Using the Stopwatch

Press the navigation key up or down to scroll through

the Calendar.

Tip

Using the World Clock

Using the File Viewer

3. Select the day to which you would like to add an

event and press Menu (right softkey) > New

Appointment.

Your device is equipped with several personal information

management features that help you manage your busy lifestyle.

4. Enter a title for the event in the Subject field using

the keypad. (See “Entering Text” on page 38.)

Section 2G. Calendar and Tools

5. Select a time and date for the event by selecting

the corresponding fields, pressing to delete

10. Select a recurrence status for the event by

highlighting the Occurs field.

any previous information, and using the keypad to

enter new values.

Ⅲ Select Once, Every [Day], Day [Number] of every

month, or Every [Month Number].

Ⅲ To toggle between AM and PM, highlight it and

press either A (for AM) or P (PM) on the keypad.

11. Select a status category for the event by

highlighting the Status field.

6. Press

to set as an All day event.

Ⅲ Select Busy, Out of Office, Free, or Tentative.

7. Use the keypad to enter a location for the event.

12. Select a sensitivity for the event by highlighting the

Sensitivity field.

8. Select the number of Attendees for the event

(default is No attendees...).

Ⅲ Select Normal, Personal, Private, or Confidential.

Ⅲ Select to add either a Required Attendee or an

13. From within the Notes field, press the navigation

key right to access the Note dialog box and enter

an optional note.

Optional Attendee and press

Ⅲ Press Menu > New Contact. (See “Adding a New

Contacts Entry” on page 80.)

14. Press Done (left softkey) to save the event and

9. Select an alarm time for the event by highlighting

return to the calendar page.

the Reminder field.

Ⅲ Select None, 1 minute, 5 minutes, 10 minutes,

15 minutes, 30 minutes, 1 hour, 1 day, or 1 week.

Section 2G. Calendar and Tools

Ⅲ Dismiss All

Event Alert Menu

Ⅲ View Item

When your device is turned on and you have an event

alarm scheduled, your device alerts you and displays

the event summary. There are several ways your device

alerts you to scheduled events:

Reviewing Calendar Events

You can quickly access any calendar entries by either

selecting an upcoming event from the Home screen or

by using the thumbwheel to open the Calendar via the

Quick Launcher.

ⅷ By playing the assigned ringer type.

ⅷ By illuminating the backlight.

ⅷ By flashing the LED.

Home screen - Upcoming Appointments

To silence the alarm and reset the schedule, press

To view additional options, press the appropriate

softkey:

ⅷ Dismiss acts to dismiss the event.

Quick

Launcher

ⅷ Menu silences the alarm and schedules it to replay

again at a select interval:

Ⅲ Remind 5 mins before

Ⅲ Snooze 5 minutes

Ⅲ Snooze 10 minutes

Ⅲ Snooze 15 minutes

Ⅲ Snooze 1 hour

Ⅲ Snooze 1 day

Section 2G. Calendar and Tools

To go to the Calendar menu for today’s date:

3. Press Menu > Month View.

ᮣ

From the Home screen, use the thumbwheel or

navigation key to scroll down to the Calendar

In the Agenda view, days with events scheduled are

shown with a triangular icon at the corner.

Tip

Events section and press

Ⅲ Calendar Events: displays the next upcoming event

and allows quick access to the Calendar screen.

Deleting an Event

1. Press Start > All Programs > Calendar.

– or –

2. Select the event you would like to erase and press

Menu (right softkey)> Delete Appointment.

1. Press Start > All Programs > Calendar >

Menu (right softkey) > Go to Today.

2. Select the event you would like to view and press

. (If you have multiple events scheduled for the

selected day, they will be listed in chronological

order.)

If the day for which you are deleting events contains

a recurring event, you will see this prompt: “Do you

want to delete all occurrences of the recurring

appointment or only this one?” Select All (left

softkey) to delete all occurrences of the event or One

(right softkey) to delete the event for the selected day

only.

Note

To review all Calendar events:

1. Press and hold the thumbwheel for at least three

seconds to activate the Quick Launcher (displayed

on the right side of the Home screen.)

Deleting Recurring Events

1. Press Start > All Programs > Calendar.

2. Scroll to the Calendar icon and press

launch the event viewer.

2. Select the event you would like to delete and press

Menu (right softkey) > Delete Appointment .

Section 2G. Calendar and Tools

3. Read the deletion confirmation screen and press

All (left softkey) to delete all instances of the event

or One (right softkey) to delete only this single

instance.

Ⅲ Choose from Select every day, Select Mon-Fri, Select

Mon-Sat, Select Sat-Sun, Select Sun-Thu, or Deselect

all.

Ⅲ Make your selection and press

5. Select a ringer tone for the alarm by selecting the

Tone field and pressing the navigation key left or

right to scroll through the tones. If you pause on a

tone, a sample will play.

Using Your Device’s Alarm Clock

Your device comes with a built-in alarm clock that has

multiple alarm capabilities.

6. Select a snooze setting by selecting the Snooze

field and using the navigation key to select Off,

1 min, 3 min, 5 min, 7 min or 10 min.

Setting up a wake-up alarm:

1. Press Start > All Programs > Organizer > Alarms >

Wake-up alarm.

7. When you have finished setting the alarm, press

Done (left softkey).

2. Check the box to the left of the Time field by

Setting a custom alarm:

pressing

. This will allow you to use the

navigation key to scroll right to the Time field.

1. Press Start > All Programs >Organizer > Alarms.

2. Select Alarm 1 - Alarm 9.

3. Highlight the Time field (7:00 by default) and then

use the keypad to enter a new time for the

wake-up alarm.

3. Use the keypad to enter an optional label for the

alarm in the Name field.

4. Use the

to uncheck any days for which you do

not want to hear the alarm.

Ⅲ Press Menu (right softkey) to choose from a list of

day options.

Section 2G. Calendar and Tools

4. Turn the alarm on or off by selecting the Alarm

activation field and using the navigation key to

adjust the selection.

7. Select a repeating status for the alarm by selecting

the Repeat field and using the navigation key to

adjust the selection.

Ⅲ Select On or Off.

Ⅲ Highlight Every day, Except Sunday, None, or Except

Saturday and Sunday.

5. Select a time for the alarm by selecting the Alarm

time field and using the navigation key to adjust the

selection.

8. Select a snooze status for the alarm by selecting

the Snooze field and using the navigation key to

adjust the selection.

Ⅲ Using your keypad or navigation key, set the

alarm time notification setting and time.

Ⅲ Highlight Off, 1 min, 3 min, 5 min, 7 min or 10 min.

Ⅲ Select Manual setting in the Alarm time window to

set an exact time for the alarm, or scroll to set the

alarm to go off from 10 minutes to 2 hours from

the current time.)

9. When you have finished setting the alarm, press

Done (left softkey).

Using Your Device’s Notepad

6. Select a ringer tone for the alarm by selecting the

Tone field and selecting from an available alert

tone.

Your device comes with a notepad that you can use to

compose and store reminders and notes to help keep

you organized.

Ⅲ To select a ringer menu, press the navigation key

right or left to make your selection, after which a

sample of the tone will sound.

Section 2G. Calendar and Tools

To compose a note:

To display sorted notes:

1. Press Start > All Programs > Organizer > Notepad >

New (left softkey).

1. Press Start > All Programs > Organizer > Notepad >

Menu (right softkey) > Sort.

Ⅲ When there is more than one note already stored,

press Menu (right softkey) > New note to create a

new note.

2. Select a sort order (ascending order or descending

order) and press

3. Select a sort key and press

2. Type your note using the keypad and press Done

(left softkey). (See “Entering Text” on page 38.)

Ⅲ By name sorts the notes based on the first few

characters.

To read a saved note:

Ⅲ By date sorts the notes based on the creation date.

1. Press Start > All Programs >Organizer > Notepad.

Ⅲ By size sorts the notes based on file size.

2. Select a note and press

To send a note via text messaging (SMS):

To delete saved notes:

1. Press Start > All Programs >Organizer > Notepad.

2. Select a note and press Menu (right softkey) >

Send via Email/Message.

2. Select a note and press Menu (right softkey)> Delete

(or Delete all, to delete all saved notes).

3. Select T ext Messages and press

4. Use the keypad to enter the recipient’s phone

number and press Send (left softkey). (For more

information, see “Using SMS Text Messaging” on

page 160.)

Section 2G. Calendar and Tools

To send a note via email:

Using Tasks

1. Press Start > All Programs > Organizer > Notepad.

Your device can keep track of your to-do list items

(tasks).

2. Select a note and press Menu (right softkey) >

Send via Email/Message.

Ⅲ A working email account must be set up on the

device before you can send an email message.

(For more information, please see the Set Up Your

Email guide included with your device.)

To create a new task

1. Press Start > All Programs > Organizer > Tasks >

Menu (right softkey) > New Task.

2. Enter the task using the keypad and press

3. Select an email provider (Outlook E-mail, Gmail, etc.)

and press Select.

3. With the task still selected, press

then press Edit (left softkey).

again, and

4. Use the keypad to enter the recipient’s contact

information and subject, and then press Send. (For

more information, please see the Set Up Your

Email guide included with your device.)

4. Select the Priority field and press the navigation

key to assign a priority to the task (Normal, Low or

High).

5. Assign a Start date and Due date for the task by

selecting the appropriate field and using the

keypad to enter the new dates.

6. Use the navigation key in the Occurs field to

designate how often the task comes up.

Ⅲ Highlight Once, Every [Weekday], Day [Number] of

every month, or Every [Month/Day].

Section 2G. Calendar and Tools

7. You can set a reminder to let you know of an

Marking a Task as Complete

upcoming task:

Y o u can place a check mark beside a task to show that

it has been completed.

Ⅲ Select the Reminder field and press

Ⅲ Enter a date the reminder should appear.

1. Press Start > All Programs >Organizer > Tasks.

8. Select an optional category for the task: Business,

Holiday, Personal, or Seasonal. (See “Filtering the Task

List ” on page 97.)

2. Select the task from the list and press Complete (left

softkey).

9. Select an optional sensitivity level for the task:

Normal, Personal, Private, or Confidential.

Task Options

To display a task's options, select a task and press

Menu (right softkey). Select an option and press

10. Select the Notes field and press

to attach an

optional personalized note to this task. When you

have completed the note text, press Done (left

softkey). (For more information, see “Using Your

Device’s Notepad” on page 93.)

ⅷ New Task to create a new task. (See “To create a new

task” on page 95.)

ⅷ Beam Task to send and receive task information

between your device and other Bluetooth-enabled

devices.

11. Press Done (left softkey) to complete the setup and

addition of the new task to your task list.

ⅷ Delete Task to permanently delete the selected task.

All new tasks are saved to the task list. You can

organize your tasks based on priority level, subject,

start date, due date, status, or other related criteria.

ⅷ Sort By to organize how tasks are sorted within the list,

using sort keys such as priority, start date, category,

and sensitivity.

Section 2G. Calendar and Tools

ⅷ Filter to display only those entries which match a

selected sort key. (See “Filtering the Task List” on

page 97.)

Ⅲ Start Date sorts tasks based on their beginning

date.

Ⅲ Due Date sorts tasks based on their date due.

ⅷ Options to select other task settings.

Filtering the Task List

●

Set reminders for new items automatically creates

an alert when a new task is created.

1. Press Start > All Programs > Organizer > Tasks >

Menu (right softkey) > Filter.

●

Show start and due dates causes the start and

due date for each task to be displayed in the

task list.

2. Press

or press the navigation key right to open

a pop-up menu.

Sorting and Filtering Tasks

Each task can be assigned to as many as four

categories.

Note

Sorting the Task List

3. Select a category type and press

to filter the

1. Press Start > All Programs > Organizer > Tasks >

current list. (If your category does not appear in the

Menu (right softkey) > Sort By.

list, select More... to display additional entries.)

2. Select one of the available sort keys from the pop-

Ⅲ All Tasks displays the complete task list.

up menu and press

to organize the current list.

Ⅲ Recent displays only the most recently added

tasks.

Ⅲ Status sorts tasks based on their status.

Ⅲ Priority sorts tasks based on their priority.

Ⅲ No Categories displays only those tasks that

currently have no category assignment.

Ⅲ Subject sorts tasks alphabetically based on their

subject title.

Section 2G. Calendar and Tools

Ⅲ Active Tasks displays only those tasks that are

currently active (not checked off as completed).

Deleting a Task

1. Press Start > All Programs >Organizer > Tasks.

Ⅲ Completed Tasks displays only those tasks that

have been checked off as completed. (See

“Marking a Task as Complete” on page 96.)

2. Select a task and press Menu (right softkey) >

Delete Task.

If there are additional categories such as, Business,

Holiday, Personal, or Seasonal, these will also be listed

as filter options.

3. Press Yes (left softkey) to delete or No (right softkey)

to cancel.

Beaming a Task via Bluetooth

Your device allows you to send and receive information

wirelessly between up to two Bluetooth-enabled

devices at a time. (For more information, see “Beaming

Files” on page 133.)

Editing a Task

1. Press Start > All Programs >Organizer > Tasks.

2. Select a task and press

3. Press Edit (left softkey).

To beam a task:

4. Select the information you wish to edit (Subject,

Priority, Status, etc.) and either press to clear

one character at a time, or use the navigation key

to make changes within the text.

1. Press Start > All Programs >Organizer > Tasks.

2. Select a task and press Menu > Beam Task. (The

phone begins to search for compatible devices in

range.)

5. Press Done (left softkey) to save your changes.

Section 2G. Calendar and Tools

3. Select a target Bluetooth device from the list and

press Beam (left softkey). (The recipient’s phone will

then display a confirmation screen where they’ll

have to agree to save the newly sent task to their

own list.)

Managing Voice Memos

Use your device’s Voice Notes to record brief memos

to remind you of important events, phone numbers, or

grocery list items.

Receiving a beamed contact:

Recording Voice Memos

When receiving a task sent by another compatible

device, you are prompted to accept the new incoming

information and then store it to your current tasks list.

1. Press Start > All Programs > Organizer > Voice Notes >

Record (left softkey).

ᮣ

Read the confirmation screen and press Done

(right softkey).

2. Begin recording after the prompt.

To end the recording of your memo:

ᮣ

Press Stop (left softkey).

Memo storage capacity is limited only by the amount

of available memory.

Note

Section 2G. Calendar and Tools

Voice Memo Options

Erasing Voice Memos

To rename voice memos you have recorded:

To erase all voice memos:

1. Press Start > All Programs >Organizer > Voice Notes.

Voice memo names start with the prefix

“Recording,” followed by a sequence number for

each recording, starting at 1.

1. Press Start > All Programs >Organizer > Voice Notes.

2. Select a voice memo from the list and press Menu

(right softkey) > Delete.

2. Select a voice memo from the list and press Menu

> Rename.

Using the Tip Calculator

3. Either press

or use the navigation key to make changes within

the voice memo name.

to clear one character at a time,

1. Press Start > All Programs >Accessories > Tip

Calculator.

2. Use the keypad to enter the bill amount and tip

percentage. (The correct tip will be calculated

instantly.)

4. Press Done (left softkey) to complete the process.

To play the voice memos you have recorded:

3. If you’re splitting the check, highlight the Splitfield

1. Press Start > All Programs > Organizer > Voice Notes.

and enter the number of people in your party.

2. Press

4. Press Calculate (left softkey) to complete the

process.

– or –

Press Menu (right softkey) > Play.

100

Section 2G. Calendar and Tools

Using the Calculator

Using the Smart Converter

Your device comes with a built-in calculator.

1. Press Start > All Programs > Accessories > Calculator.

2. Enter numbers using your keypad.

Your device comes with a built-in conversion

application.

1. Press Start > All Programs > Accessories > Smart

Converter.

Ⅲ Press

to enter decimal points.

2. Select a conversion type and press

Ⅲ Press

to change the numeric value from

Ⅲ Select Currency, Length, Weight, Volume, Area, or

Temperature.

positive to negative.

Ⅲ Press Clear (left softkey) to clear all numbers.

3. Select a unit to convert from and then enter a value

for the unit.

3. Press

for the total.

Ⅲ Press

to add a decimal point. Your device can

display up to six digits after an inserted decimal

point.

Ⅲ For temperature conversions, press

to change

the temperature to either below or above zero.

Ⅲ Press Clear (left softkey) to delete all numbers.

Section 2G. Calendar and Tools

101

Using the Stopwatch

Using the World Clock

Your device comes with a built-in stopwatch.

1. Press Start > All Programs >Accessories > Stopwatch.

2. Press Start (right softkey) to turn on the timer.

To view the time in over 50 different locations:

1. Press Start > All Programs >Organizer > World Clock.

2. Press the left softkey to switch between World map

and World clock views.

3. Press Reset (left softkey) to set the timer back to

zero.

3. Highlight Clock 1 or Clock 2 and then press Edit

(right softkey) > Assign to configure the clock.

4. Press

to exit the application and return to the

Home screen.

4. Select a Country, City, and Time Zone (including

Daylight Saving Time) and press Done(left softkey).

102

Section 2G. Calendar and Tools

Using the File Viewer

You can view many Microsoft Office^®and Adobe^®PDF

files using the included File Viewer. This application

allows you to view and print Microsoft Office files.

Compatible applications include Adobe PDF, Word^®,

PowerPoint^®, and Excel^®. Office files must be created

within Microsoft Office 97, 98, 2000, XP, 2003, and

2007.

Office 2007 file extensions such as docx, pptx, and

xlsx are supported. Adobe PDF 1.8 format are also

supported.

Note

To use the File Viewer:

1. Press Start > All Programs > File Viewer.

2. Use the navigation key to locate a file to view.

3. Highlight the file and press

Section 2G. Calendar and Tools

103

Section 2H

Using Your Device’s microSD Card

and Adapter

Using the microSD Card

Your device is capable of supporting an optional

memory storage medium known as a microSD

memory card (TransFlash™ card). This card allows you

to expand your device's memory space to store music,

videos, photographs, and data in your device.

ࡗ

Using Your Device’s microSD Card and Adapter

microSD Settings

microSD Folders

Connecting Your Device to Your Computer

General Precautions

Memory cards with over 2 GB storage capacity will not

work with this device.

Your device lets you use a microSD™ card and an adapter to

expand the available memory space. This highly secure

digital card enables you to exchange images, music,

and voice data between SD-compatible devices.

This section details the features and options of your

device’s microSD functionality.

104

Section 2H. Using the microSD Card

4. With the card now securely installed, replace the

Installing the microSD Memory Card

plastic cover over the microSD slot on the device.

1. Locate the memory slot on the right side of the

device and flip up the microSD plastic cover.

Be sure to use only recommended microSD cards

(32MB–2 GB). Using non-recommended microSD

cards could cause data loss and damage your

device.

Note

microSD slot

plastic cover

Removing the microSD Memory Card

1. Flip up the microSD plastic cover on the right side

of the device.

2. Firmly push the end of the card further into the

device and release—the card should pop out from

microSD card

2. Make sure the microSD card's gold contacts are

facing up.

3. Carefully insert the microSD card into the opening

and firmly push it in until you hear a click that

indicates the card is securely installed.

Section 2H. Using the microSD Card

105

the memory card slot. If this does not work, repeat

this process.

microSD Settings

Formatting the microSD Card

1. With the microSD card inserted, press Start > All

Programs > Settings > More...> Memory Information.

2. Press Menu (right softkey) > Format Storage Card.

(A warning will be displayed.)

3. If you are sure you wish to remove all the files from

your microSD card, press Yes (left softkey), or press

No (right softkey) to cancel the operation.

The microSD card can be easily damaged by

improper operation. Please be careful when inserting,

removing, or handling it.

Note

The formatting procedure erases all the data on the

microSD card, after which the files CANNOT be

retrieved. To prevent the loss of important data,

please check the contents before you format the

card.

Note

DO NOT remove a microSD card while files are being

accessed or transferred. Doing so will result in loss or

damage of data.

4. Press OK (left softkey) to return to the Memory

Information screen.

5. PressDone (left softkey) to exit this screen.

Make sure your battery is fully charged before using

the microSD card. Your data may become damaged

or unusable if the battery runs out while using the

microSD card.

106

Section 2H. Using the microSD Card

Creating Folders in the microSD Card

Viewing Memory Space on the

microSD Card

The built-in camera or camcorder will create a My

Pictures folder on an installed microSD memory card

the first time a picture or video is saved to the memory

card. Also, the camcorder will create a My Videos

subfolder in the My Pictures folder on an installed

microSD card the first time the camcorder stores a

video to the card.

ᮣ

With the microSD card inserted, press Start >

All Programs > Settings > More... > Memory Information.

(The total, free, and used memory space is shown

numerically in addition to a color-coded bar that

shows used vs. free memory space.)

You can create other folders on the microSD card

using the following steps.

microSD Folders

1. Ensure that the microSD card is properly inserted.

Viewing Your microSD Folders

2. Press Start > All Programs > File Explorer > Menu

(right softkey) > Storage Card. (This accesses the

microSD card and displays the root directory.)

All the files stored in your microSD card are organized

into folders.

ᮣ

Press Start > All Programs > File Explorer > Menu

3. Select Menu (right softkey) > Edit > New Folder.

(right softkey) > Storage Card.

4. With the default “New Folder” name highlighted,

To change the display mode:

use the keypad to enter a new name and press

1. Press Menu (right softkey) > View.

When a picture or video is first taken, the device

automatically creates a My Pictures folder. See

“Adjusting Settings” on page 115.

Note

Section 2H. Using the microSD Card

107

2. Select either Icons or List and press

Connecting Your Device to

Your Computer

Ⅲ Icons displays all content (folders and files) as

icons in rows of four.

Ⅲ List displays all files as a list.

To change the sort order:

Before using your device’s mass storage capabilities,

you need to prepare your device’s data services to

synchronize with your desktop or laptop computer.

Once the device is connected to the computer, you can

transfer your data to or from the microSD card.

1. Press Menu (right softkey) > Sort By.

2. Select a sort key (Name, Date, Size, or Type) and

press

The device can be configured to communicate with

your computer as an extension of your computer by

using the ActiveSync^®utility which is used to

Launching a File from the microSD Card

1. Press Start > All Programs >File Explorer > Menu

(right softkey) > Storage Card.

synchronize computer applications with your device.

Before you can connect your device to your computer

via USB, you will need to install the ActiveSync

application.

2. Select a folder and press

to reveal the folder’s

to launch the file’s

contents.

3. Select a file and press

associated application.

1. With the microSD card inserted, press Start >

All Programs > Settings > Connections > More... >

USB to PC.

2. Check the “Enable advanced network

functionality” box by pressing

(left softkey).

and press Done

108

Section 2H. Using the microSD Card

3. Connect the other end of the cable to your

configuration of ActiveSync is covered in a later

section (page 144).

computer.

4. Plug one end of the included USB cable into your

Power/Accessory Interface connection located on

the side of the device. (Wait for the connection to

be completed. When connected, your computer

will automatically detect your device.)

6. Click the My Computer icon on the Windows

desktop, and double-click Mobile Device (which

may appear as an icon or text, depending on your

View settings).

Ⅲ A window opens showing a My Windows Mobile-

Based Device icon and additional folders which

comprise your device's My Documents folder. This

folder may contain subfolders for My Pictures, My

Ringtones, Notes, and Templates. These folders

must not be modified or deleted.

Ⅲ The My Documents directory (Start > All Programs >

File Explorer > Menu [right softkey] > My Documents)

provides access to only those folders available on

the device and not on the microSD card.

Correct

7. Double-click the My Windows Mobile-Based Device

icon to reveal all the device contents (both storage

card and internal device folders).

Incorrect

5. If ActiveSync was previously installed on your

computer, the application will prompt you to

configure the new connection profile. For now,

click Cancel and close the application. Setup and

Ⅲ My Documents contains all the built-in device

folders that are part of the My Documents group.

Section 2H. Using the microSD Card

109

Ⅲ Program Files contains all currently installed

applications, such as Camera, RSS Reader, and

Windows Media Player^®.

General Precautions

ⅷ No driver installation is required for Windows 2000/

ME/XP users. If you use Windows 98 (or 98SE), you

will need to download and install the USB mass

storage driver from the Sprint Web site at

www.sprint.com.

Ⅲ Storage Card contains the microSD card directory

of user-created files and folders.

8. Double-click the Storage Card folder to reveal the

contents of the microSD card.

ⅷ To avoid loss of data, do not remove the USB cable,

the microSD card, or the battery while files are being

accessed or transferred.

Transferring data directly to the microSD

The microSD card can be accessed and used just as

easily as any other communicating storage device.

ⅷ Do not use your computer to change or edit folder or

file names on the microSD, and do not attempt to

transfer large amounts of data from the computer to

the microSD card. Doing so may cause the microSD

card to fail.

1. From your Desktop, double-click My Computer >

Mobile Device > My Windows Mobile-Based Device >

Storage Card entry to display the folders and files

available on the internal microSD card.

ⅷ Do not turn off or restart your computer, or put it into

standby mode while using a mass storage device.

Doing so may result in loss or damage of data.

2. Open a folder and begin the transfer process of

files for your computer to the internal card’s target

folder.

ⅷ If you connect a mass storage device to a peripheral

device, the peripheral device may not work properly.

To remove the connection:

ᮣ

When you have finished transferring data, unplug

the USB cable from the device.

110

Section 2H. Using the microSD Card

Section 2I

Taking Pictures

Taking pictures with your device’s built-in camera is as

simple as choosing a subject, pointing the lens, and

pressing a button.

Camera

Although the side button

text, you can also quickly activate the camera or

camcorder by pressing and holding the side button.

can be used for clearing

ࡗ

Taking Pictures

Adjusting Settings

Recording Videos

Working with Pictures and Videos

Sending Pictures and Videos by Email

Printing Pictures via Bluetooth

Your device’s built-in camera gives you the ability to take full-

color digital pictures, view your pictures using the device’s

display, and instantly send them to family and friends. It’s fun,

and it’s as easy to use as a traditional point-and-click

camera.

This section explains the features and options of your

device’s built-in camera.

Section 2I. Camera

111

To launch the camera or camcorder:

Ⅲ To return to camera mode to take another picture

and save your current image, press Save

(left softkey).

ᮣ

Press and hold

– or –

When the Autosave feature is enabled, your pictures

are automatically stored (page 115).

Press and hold

Note

The camera will open to its last-used function

(camera or camcorder).

Note

Camera Mode Options

When the device is in camera mode, press Menu (right

softkey) and navigate through the various options:

To take a picture:

1. Press Menu > Camera to activate camera mode.

(Additional camera options are available through

the camera’s Menu. See “Camera Mode Options”

on page 112 for more information.)

Camera Menu Options

Space Remaining

1280

OFF

Storage

Location

36M

AUTO

960

HELP

Camera

To activate camera mode, you can also press

and hold . (See illustration on page 111.)

Shortcut

Camcorder

2. Using the device’s display screen as a viewfinder,

aim the camera lens at your subject.

3. Press

or the thumbwheel until the shutter

sounds. (The picture will be saved in your selected

storage area. See “General Settings” on page 115.

Camera

View

Capture

Display

112

Section 2I. Camera

ⅷ Camera/Camcorder to toggle between camera and

camcorder.

Setting the Self-timer

1. From camera mode, press Menu > Timer.

ⅷ Shooting Mode to select from the following image

capture options:

2. Highlight the length of delay you want the timer to

use (2 Sec, 5 Sec, or 10 Sec) and press

Ⅲ Single Shot, Multi Shot, Mosaic Shot, Frame Shot,

or Night Shot. (See “Taking Multiple Shots” on

page page 113.)

3. Press to start the timer. (A numeric countdown

is displayed on the upper left portion of the display

screen.)

ⅷ Size to select a picture’s image size (1280x960,

640x480, or 320x240).

4. Get ready for the picture. (The device will make a

ⅷ Timer to activate the camera’s timer. (See “Setting the

Self-Timer. (See “Setting the Self-Timer on

page 113.)

chirping sound just before taking the picture.)

To cancel the Self-timer after it has started:

ᮣ

Press

ⅷ White Balance to adjust white balance based on

changing conditions. Select from Auto, Daylight, Cloudy,

Tungsten, or Fluorescent.

While the self-timer is active, all keys are disabled

except Back, End, and Home.

Note

ⅷ Effect to select a variety of color tones for the picture

(No effects [default], Sepia, B/W, or Negative).

Taking Multiple Shots

ⅷ Help to view key functions in camera mode.

This feature allows you to take a series of continuous

shots. When you take multiple shots, thumbnails of

those images are displayed in the viewfinder. When

multiple shots are selected, the image size is

automatically set to 640 x 480.

ⅷ Settings to adjust General, Camera, and Camcorder

settings. (See “Adjusting Settings” on page 115.)

Section 2I. Camera

113

1. From camera mode, press Menu (right softkey) >

Shooting mode.

3. Press

or the thumbwheel button to take the

pictures. (The Multi shot option will display 3,6,9, or

12 thumbnail pictures onscreen.)

If your device’s memory is full, the Shooting mode

option is still displayed but a picture can not be

taken.

Note

When the Autosave feature is enabled, your pictures

are automatically stored (page 115).

Note

2. Select one of the following options and press

Ⅲ Single shot to take a single picture.

Adjusting the Zoom

This feature allows you to zoom in on an object when

you take a picture. Depending on your resolution

settings, you can adjust the zoom from 1x to 2x.

Ⅲ Multi shot to take a series of pictures. (This value is

determined by the Multi shot value set in the

Settings menu [page 116].)

ᮣ

From camera mode, press the navigation key up or

down to adjust the zoom. A zoom bar is displayed

on the right side of the display screen.

Ⅲ Mosaic shot to take a series of four pictures

displayed in a 2x2, side-by-side, or top/bottom

pattern.

Ⅲ Frame shot to take a single picture surrounded by

a fun picture frame (frame [default], rabbit, bean,

Charles, hair, christmas, snow, halloween, birthday, or

heart).

Adjusting the Brightness

ᮣ

From camera mode, press the navigation key left

or right to adjust the brightness level. (A brightness

level bar is displayed across the bottom of the

display screen.)

Ⅲ Night shot to take a picture in low light levels.

114

Section 2I. Camera

Ⅲ Normal View displays a common set of icon

indicators along the top portion of the screen

Adjusting Settings

Ⅲ No Indicators displays only

options (View and Menu) along the bottom portion

of the screen.

and the softkey

There are three categories of settings that can be made

within camera/camcorder mode:

ⅷ General

ⅷ Camera

ⅷ Camcorder

Ⅲ Guideline view displays a 3x3 grid over the entire

display to help you compose the image. This view

also provides the standard icon indicators along

the top portion of the screen.

General Settings

2. Press Done (left softkey) to store the setting.

These are options that apply to both the camera and

camcorder such as Viewfinder, Auto save, Default

Storage, and Time Out.

Enabling autosave:

1. From the General menu, select Auto save and use

the navigation key to select a setting:

1. Press Start > All Programs > Camera > Menu

(right softkey).

Ⅲ On automatically stores the new picture or video into

the default storage location. This option bypasses the

Save option being presented onscreen.

2. Use the navigation key to select the Settings icon

(

) and press

3. Select General and press

Ⅲ Off causes an onscreen Save option to appear

onscreen. This requires that you choose whether

to save or discard each new image/video.

Setting the viewfinder format:

1. From the General menu, select Viewfinder and use

the navigation key to select from one of the

available options:

2. Press Done (left softkey) to store the setting.

Section 2I. Camera

115

2. Use the navigation key to select the Settings icon

) and press

Setting a default storage location:

(

1. From the General menu, select Default Storage and

use the navigation key to select a setting:

3. Select Camera and press

4. Select and change settings using your navigation

key.

Ⅲ My device stores new pictures or videos into the

My Pictures folder on the device.

Ⅲ Quality to select the picture quality setting (Fine,

Normal, or Economy).

Ⅲ Storage card stores new pictures or videos into the

My Pictures folder on the memory card.

Ⅲ Multi Shot to select the number of simultaneous

pictures taken during a multishot sequence

(6, 9, 12 or 3).

2. Press Done (left softkey) to store the setting.

Setting a time out value:

Ⅲ Speed to select how quickly the camera responds

1. From the General menu, select Time Out and use

the navigation key to select an inactivity timeout

setting (After 1 minute, After 2 minutes, After 3 minutes,

or Never.)

after

is pressed (Normal, Low, or High).

Ⅲ Mosaic Shot to select the number and orientation

of the pictures taken for a mosaic shot (2x2, 2Horz

or 2Vert).

2. Press Done (left softkey) to store the setting.

Ⅲ Sound to set sound options for camera functions.

Camera Settings

●

Shutter to select a shutter sound (Shutter1,

Shutter2, Crystal, Dingdong, Great or Off).

These options affect camera operation only.

●

Zoom determines whether a sound is played

when zooming (On or Off).

1. Press Start > All Programs >Camera > Menu

(right softkey).

116

Section 2I. Camera

●

Brightness determines whether a sound is

played when the brightness is adjusted (On or

Off).

5. Press Done (left softkey) to store these settings.

Recording Videos

5. Press Done (left softkey) to store these settings.

In addition to taking pictures, you can also record, view,

and send videos to your friends and family with your

device’s built-in video camera.

Camcorder Settings

These settings affect camcorder operation only.

1. Press Start > All Programs>Camera > Menu >

Camcorder to activate video mode.

1. Press Start > All Programs > Camera > Menu

(right softkey).

– or –

2. Use the navigation key to select the Settings icon

(

) and press

Press and hold

> Menu > Camcorder.(Additional

video options are available through the video

mode Menu. See “Video Mode Options” on

page 118 for more information.)

3. Select Camcorder and press

4. Select and change settings using your navigation

key.

2. Using the device's display screen as a viewfinder,

aim the camera lens at your subject.

Ⅲ Sound to set sound options for camcorder

functions.

3. Press

or the thumbwheel to begin recording.

●

Start determines whether a sound is played

when the camcorder begins recording

(On or Off).

Ⅲ Press Cancel (right softkey) to reset the camcorder

without saving.

4. Press

or the thumbwheel to stop recording.

End determines whether a sound is played

when the camcorder stops recording

(On or Off).

Section 2I. Camera

117

5. Press Save (left softkey) to save the video to the

default storage location. (See “General Settings”

on page 115.)

ⅷ Camera/Camcorder to toggle between Camera and

Camcorder. (For more details see “Recording

Videos” on page 117.)

ⅷ Size to select a video’s image size (320x240 or

176x144).

Video Mode Options

When the device is in camcorder mode, press Menu

(left softkey) and navigate through the various options:

ⅷ Timer to activate the camcorder’s timer. (See “Setting

the Self-Timer on page 113.)

ⅷ White Balance to adjust white balance based on

changing conditions. Select from Auto, Daylight, Cloudy,

Tungsten, or Fluorescent.

Camcorder Menu Options

Space Remaining

320

Storage

Location

36M

OFF

AUTO

240

Camera

HELP

ⅷ Audio to toggle the microphone On or Off during

recording.

Camcorder

ⅷ Effect to select a variety of color tones for the video

(No effects [default], Sepia, B/W, or Negative).

ⅷ Help to view key functions in camcorder mode.

ⅷ Settings to adjust General, Camera, and Camcorder

settings. (See “Adjusting Settings” on page 115.)

Selecting Video Settings

ⅷ See “Camcorder Settings” on page 117.

Camcorder

View

Display

Image

Shoot Video

118

Section 2I. Camera

Device Picture and Video Folders

Working with Pictures and Videos

To review your pictures and videos saved on the device:

Depending on the default storage location, your

pictures and videos are stored in the My Pictures folder

either on the device or on the memory card.

1. Press Start > All Programs > Pictures & Videos. (This

navigates to the My Pictures folder on the device.

From there you can access videos by opening the

My Videos subfolder.)

The number of pictures and videos that can be stored

in your device is not only determined by the fixed

amount of available onboard memory, but also by the

size of other files stored on your device such as

Contacts, Voice Notes, and Calendar entries.

2. Use your navigation key to view and scroll through

the pictures.

Ⅲ To launch the camera, highlight the camera icon

and press

Deleting pictures will free up memory space on your

device to enable you to take more pictures.

Note

3. Select a picture or video and press

file.

to view the

– or –

The number of pictures and videos stored on the

microSD card is much more variable because of

differences in memory card sizes.

1. Press Start > All Programs > File Explorer >

My Documents > My Pictures.

2. Use your navigation key to view and scroll through

the available pictures or videos (within the My

Videos subfolder).

Section 2I. Camera

119

4. Select a picture or video and press

file.

to view the

microSD Picture and Video Folders

You can save pictures and videos directly to the

microSD card using your device’s pictures and videos

settings. The maximum number of pictures or videos

that can be saved to the microSD card is limited only

by the memory size of the card.

– or –

1. Press Start > All Programs > File Explorer > Menu >

Storage Card > My_Images.

2. Use your navigation key to view and scroll through

the available pictures or videos (within the My

Videos subfolder).

To review your pictures and videos saved to the storage

card:

1. Press Start > All Programs >Pictures & Videos >

Menu (left softkey) > Folders > Storage Card. (This

navigates to the My Pictures folder on the microSD

on the device. From there you can access videos

by opening the My Videos subfolder.)

My Pictures Folder Options

Whether a picture file is stored in either the device or

on the storage card, the My Pictures folder provides

some general folder options.

1. Navigate to the My Pictures folder in either the

2. Select the My_Images folder and press

device or storage card.

3. Use your navigation key to view and scroll through

the pictures.

2. Highlight an image, press Menu (right softkey) for

more options:

Ⅲ To launch the camera, highlight the camera icon

Ⅲ Send to send the image or video in a message.

(See page 123 for details.)

and press

Ⅲ Beam... to send the image or video directly to

another Bluetooth-compatible device.

120

Section 2I. Camera

Ⅲ Edit to display the following:

Ⅲ My Documents to display the My Documents folder

stored in the device.

●

Cut to remove the file from the current location,

and temporarily store it in the phone’s

memory.

Do not modify or delete any folders other

than the storage card or the My Documents

folders, as this could affect the device and its

applications.

WARNING

●

Copy to make a copy of the current file and

temporarily store it in the phone’s memory.

Paste to transpose the previously selected file

(via either cut or copy) file to the current folder. Picture and Video File Options

●

Delete to erase the currently selected file.

When you are viewing a picture or playing a video file

from either the device or the storage card, press Menu

Rename to change the name of the currently

highlighted file.

(right softkey) to display the following options:

●

New Folder to create a new subfolder in the

current location.

ⅷ Zoom to change the level of detail in the picture

displayed on the screen. Select from either: Zoom In,

Zoom Out, Fit to Screen, or Actual Size.

Ⅲ Properties to provide Name, Location, File Type,

File Size, and Date Created information.

ⅷ Play Slide Show to view a sequence of pictures from

the selected folder (only available when two or more

pictures are saved to the folder).

Ⅲ View to display the current files as either a List or

as a series of Icons.

Ⅲ To exit the Slideshow, press

Ⅲ Sort By to sort the entries by Name, Date, Size, or

Type.

Ⅲ To rotate an image, press the navigation key up or

down.

Ⅲ My Device to display all folders on your device

(including those on the storage card).

Section 2I. Camera

121

ⅷ Use as Home Screen to set the current image as the

ⅷ Save to save the picture using either:

background for the Home screen.

Ⅲ Save to Contact... to assign the current picture as the

ⅷ Beam picture... to choose from a list of compatible

devices and then send the image via Bluetooth to a

selected device. (See “Beaming Files” on page 133.)

Caller ID for a selected Contacts entry. Select an

entry and press

Ⅲ Save As... to save the picture under a different

ⅷ Edit to display the following options:

name (see above).

Ⅲ Rotate to rotate the picture 90 degrees clockwise.

ⅷ Properties to display a picture's name, location, file

type, file size, date created, and protection status.

Ⅲ Crop to cut out unwanted parts of the picture

using your navigation key to reframe the visible

image.

ⅷ Options to access other image options:

Ⅲ General to set the dimensions for images to be

emailed (Large [640x480], Medium [320x240],

Small [160x120], or Original size) and to rotate left

90 degrees or right 90 degrees when rotating a

picture.

Ⅲ Auto Correct to correct the image for brightness,

contrast, and color.

Ⅲ Undo to undo the last action.

Ⅲ Cancel to cancel the edit process.

Ⅲ Slideshow to set the default orientation (landscape

or portrait) for pictures in slideshows; and to

enable the slideshow to run as a screensaver on

a connected computer after a two-minute idle

period.

Ⅲ Save As to save a picture to the same location

under a different name using the keypad and

122

Section 2I. Camera

ⅷ Print via Bluetooth to send the selected picture to a

Bluetooth-compatible printer. See “Printing Pictures

via Bluetooth” on page 124.

To send pictures or videos to email

recipients:

Ⅲ Use your navigation key to specify the following

settings for the printed image: Layout, Media Size,

MediaType, Quality, Orientation, Sides, Copies,

and NumberUp.

1. Highlight a picture or video by following the steps

listed in either “Working with Pictures and Videos”

on page 119 or “microSD Picture and Video

Folders on page 120 (depending on the storage

location of the picture or video you wish to send).

Ⅲ Press Print to send the file to the printer.

2. Press Menu (right softkey) > Send.

Sending Pictures and Videos

by Email

3. Highlight an email account and pressSelect

(left softkey).

4. Enter the recipient's email address in the To: field

using the keypad. (See “Entering Text” on

page 38.)

Once you have taken a picture or a video, you can use

the messaging capabilities of your device to instantly

share it with family and friends as an email attachment.

5. Enter a message title in the Subject:field using the

keypad.

You will need to set up an email account before you

can send pictures or videos. (For more information,

please see the Set Up Your Email guide included with

your device.)

6. Press the navigation key down to the message

area below the Attachment field and enter a

message, if desired.

7. To insert an additional picture or video, press Menu

(right softkey) > Insert > Picture.

Email messages (with or without attachments)

cannot be sent to phone numbers, only to valid email

addresses.

Note

Section 2I. Camera

123

8. Highlight a picture (or navigate to a video) and

press

4. Select a Bluetooth-enabled printer from the list of

detected devices and press Next (left softkey).

9. Press Send (left softkey) to send the message.

5. Use the keypad to enter a passcode and press

Next (left softkey). (An onscreen message will tell

you if the connection was made successfully. If the

connection failed, please confirm the device is

functioning correctly and repeat steps 3 and 4.)

Printing Pictures via Bluetooth

Your device can send pictures to a Bluetooth-

compatible printer, allowing you to print pictures stored

on your device without the need for connecting cables

or additional software.

6. Press OK (left softkey).

7. Use the keypad and

for the printer and press Next (left softkey).

to enter a display name

8. From the Services screen, check the Printer box by

Make sure your battery is fully charged before using

this feature and that your printer is turned on and

functioning properly.

Note

highlighting the option and pressing

9. Press Done (left softkey) twice to return to the

Connections screen.

To set up your device for Bluetooth printing:

To print pictures directly from your device:

1. Confirm that Bluetooth has been enabled on your

device. (See “Turning Bluetooth On and Off” on

page 126.)

1. Press Start > All Programs >Pictures & Videos. (This

displays pictures and videos stored on the device.)

– or –

2. Press Start > All Programs >Settings > Connections >

Bluetooth.

Press Start > All Programs > File Explorer > Menu (right

softkey) > Storage Card > My_Images.

3. Select Add new device... and press

124

Section 2I. Camera

2. Highlight an image and press Menu (right softkey)

Ⅲ Sides: To choose from either Single-Sided or

Double-Sided.

> Print via Bluetooth.

Ⅲ If the picture has already been selected and

opened, press Menu (right softkey) > Print via

Bluetooth.

Ⅲ Copies: To specify the number of copies to print at

one time.

Ⅲ NumberUp: To print a page number on each print.

3. From the list of available BPP-configured devices,

You may need to provide a passkey to continue

printing.

highlight a printer and press

Note

4. Specify printer settings:

5. When you have finished selecting the printer

settings, press Print (left softkey).

On some printers, the image may be printed using

the printer’s default printing setup without the need

to make any settings on your device.

Note

Ⅲ Layout: To print one large print or two, four, or nine

smaller prints per sheet.

Ⅲ Media Size: To set the print size (4x6, 5x7, 8x10,

letter, etc.). Print sizes may vary according to the

type of printer you have.

Ⅲ Media Type: To set the paper type.

Ⅲ Quality: To set the print quality.

Ⅲ Orientation: To set the orientation of the printed

page (Portrait or Landscape).

Section 2I. Camera

125

wireless devices. The Bluetooth communication range

is usually up to approximately 30 feet.

Section 2J

This section details how to set up and make the most

of your device’s Bluetooth capabilities.

Bluetooth

Turning Bluetooth On and Off

ࡗ

Turning Bluetooth On and Off

Using the Bluetooth Settings Menu

Bluetooth Profiles

By default, your device’s

Bluetooth feature is turned

off. Turning your Bluetooth

on makes your device

Bluetooth Information Settings

Pairing Bluetooth Devices

Using Hands-Free Devices

Bluetooth OBEX FTP

discoverable (connectable).

To turn Bluetooth on:

Using a Bluetooth Virtual Serial Port

Beaming Files

1. Press the Power button

to launch the Quick List

screen.

Your device features built-in Bluetooth technology, allowing you

to share information more easily than ever before. Bluetooth is

a short-range communications technology that allows

you to connect wirelessly to a number of Bluetooth

devices, such as headsets and hands-fr ee car kits, and

Bluetooth-enabled handhelds, PCs, printers, and

126

Section 2J. Bluetooth

Bluetooth Status Indicators

On the Wireless Manager screen, select and activate

the All field to toggle the Bluetooth and your wireless

connection on and off.

Note

The following icons show your Bluetooth connection

status at a glance:

ⅷ

– Bluetooth is active.

2. Select Wireless Manager and press

ⅷ

– Bluetooth is disabled (default status).

3. Highlight the Bluetooth field and press

enable Bluetooth.

Using the Bluetooth Settings Menu

Ⅲ When Bluetooth is inactive, the Bluetooth field

displays the icon.

Ⅲ When Bluetooth is active, the

The Bluetooth Settings menu allows you to set up many

of the characteristics of your device’s Bluetooth service,

including:

icon is

displayed on both this field and on the screen.

4. Press Done (left softkey) to exit and return to the

ⅷ Entering or changing the name your device uses for

Bluetooth communication

Start screen.

ⅷ Setting your device’s visibility (or “discoverability”) for

other Bluetooth devices

To turn Bluetooth off:

1. Press the Power button, select Wireless Manager,

and press

2. Highlight the Bluetooth field and press

disable Bluetooth.

3. Press Done (left softkey) to exit and return to the

Start screen

Section 2J. Bluetooth

127

To access the Bluetooth Settings screen:

About Discoverability (Visibility)

1. Press the Power button, select Wireless Manager,

Making your device discoverable (visible) allows other

devices to detect it when they search for in-range

Bluetooth-compatible devices. Y o ur device must be

turned on and the built-in Bluetooth radio must also be

turned on and discoverable. To turn on your device's

visibility, see step 3 in “To access the Bluetooth

Settings screen:” on page 128.

and press

2. Highlight the Bluetooth field and press Menu

(right softkey) > Bluetooth Settings.

Another way to navigate to the Bluetooth Settings

screen is Start > All Programs > Settings >

Connections > Bluetooth.

Note

Bluetooth Profiles

3. Press Menu (right softkey) to set your Bluetooth

options.

All of the Bluetooth settings you configure are stored in

your device’s Bluetooth user profile. You can use

different profiles for specific Bluetooth functions.

Ⅲ Select Turn Off Bluetooth to disable Bluetooth. If

Bluetooth is already turned off, this option will be

Turn On Bluetooth.

ⅷ HSP: Headset Profile – This profile functions as a

wireless ear jack. When an incoming call is received,

the ringer can be heard through the headset instead

of through the device. The call can then be received

by pushing a button. While using the device, you can

use the headset instead of the device by pushing a

button on the headset, the same as inserting a jack

into the device. Increase or decrease the volume by

using the volume key on the side of the device.

Ⅲ Select Turn On Visibility to make your device visible

to other Bluetooth-enabled devices. If visibility is

already turned on, this option will be Turn Off

Visibility.

Ⅲ Select COM Ports to set up a COM port (after

pairing with a device) by pressing Menu (right

softkey) > New Outgoing P ort .

128

Section 2J. Bluetooth

ⅷ HFP: Hands-Free Profile – This profile functions as a

wireless car kit. Incoming calls ring to the hands-free

headset or device. Calls can be received by pressing

a button on the headset or device. For dialing, four

functions are supported: recent call dial, voice dial,

speed dial, and number dial. Increase or decrease

the volume by using the volume key on the side of

the handset.

ⅷ BPP: Basic Printing Profile – This profile enables simpler

printing from your device to a Bluetooth-enabled

printer.

ⅷ A2DP: Advanced Audio Distribution Profile – This profile

allows you to transmit high quality stereo music from

your device to other compatible accessories

including Bluetooth stereo headsets.

ⅷ AVRCP: Audio/Video Remote Control Profile – This profile

enables your device to remotely control compatible

accessories including Bluetooth stereo headsets.

You can play, pause, stop, forward, backward from a

headset. (Playback functions may vary among

Bluetooth accessories.)

This feature may not be initially available.

Note

ⅷ PAN: Personal Area Network Profile – This profile

functions as a wireless data cable, connecting a

computer or PDA to a network through your handset.

ⅷ PBAP: Phone Book Access Profile – This profile enables

exchange of Contacts information between devices.

It is typically used between a car kit and a mobile

device to allow the car kit to display the name of the

incoming caller.

ⅷ OPP: ObjectPush Profile – This profile uses the Generic

Object Exchange profile services to send data

objects between devices and can be used to

exchange objects like music files, pictures, and

calendar (vCal) and business cards (vCard).

ⅷ HID: Human Interface Device Profile - This profile

enables your device to remotely control compatible

accessories including Bluetooth Human Interface

Devices (such as a mouse or keyboard).

ⅷ FTP: File Transfer Profile – This profile allows you to

transfer files to or from other Bluetooth-enabled

devices.

Section 2J. Bluetooth

129

ⅷ ActiveSync : To use ActiveSync^®via Bluetooth wireless

technology, you need to configure the settings for

both your computer and your device. For more

information, refer to “Synchronizing with ActiveSync”

on page 144.

Assigning a Bluetooth Name to your Device:

By default, your device is given the Bluetooth name

“SPH-I325”. You may wish to assign a unique name to

avoid confusion if there are other similar devices within

the Bluetooth coverage range.

ⅷ OBEX: Object Exchange Protocol - This profile

provides an efficient, compact binary protocol that

enables a wide range of devices to exchange data

spontaneously in a simple, efficient manner.

1. Press Start > All Programs >Settings > Connections >

Bluetooth Profiles > My Information Setting.

2. Select the Device Name field.

ⅷ SPP: Serial Port Profile - This profile emulates a serial

cable to provide a wireless replacement for existing

RS-232 based serial communications applications.

3. Press and hold

to delete the default “SPH-I325”

name.

4. Use the keypad to enter a new descriptive name.

(This is the name which will appear to other users

when your Bluetooth visibility is turned on.)

Bluetooth Information Settings

5. Press Done (left softkey) to return to the Bluetooth

Your device’s My Information Setting menu allows you to

configure and review many of your device’s Bluetooth

settings, including:

Profiles screen.

To view your Bluetooth device address:

ⅷ Entering or changing the name your device uses for

Bluetooth communication.

1. Press Start > All Programs >Settings > Connections >

Bluetooth Profiles > My Information Setting.

ⅷ Displaying your device’s Bluetooth address.

130

Section 2J. Bluetooth

2. Use either the thumbwheel or navigation key to

scroll down the My Information Manager page to

review the Device Address Bluetooth uses for your

device.

2. Press Start > All Programs > Settings > Connections >

Bluetooth.

3. Select Add new device.. and press

. (Your device

will display a list of discovered in-range Bluetooth

devices.)

Pairing Bluetooth Devices

Bluetooth-capable computer

Bluetooth-capable printer

Pairing Devices

The Bluetooth pairing process (bonding) allows you to

establish trusted connections between your device and

another Bluetooth device. When devices are paired, a

passcode is shared between devices, allowing for fast,

secure connections while bypassing the discovery and

authentication process.

Bluetooth headset

Bluetooth-capable phone

4. Select a device and press Next (left softkey).

When pairing your device to other Bluetooth devices,

ensure that your device is not connected to your

computer via a USB cable.

Note

5. Use the keypad to enter a passcode and press

Next (left softkey). (An onscreen message will tell

you if the connection was made successfully. If the

connection failed, please confirm the device is

functioning correctly and repeat steps 3 and 4.)

To pair your phone with another Bluetooth device:

1. Confirm that Bluetooth is enabled. (See “Turning

Bluetooth On and Off” on page 126.)

Section 2J. Bluetooth

131

6. Use the keypad and

to enter a display name

for the Bluetooth device and press Next (left

To allow your phone to be paired with another Bluetooth

device:

softkey).

1. Make sure your Bluetooth feature is active and

your device is visible. See “Using the Bluetooth

Settings Menu” on page 127.

7. From the Services page, check the Hands Free box

by highlighting the option and pressing

Ⅲ If you are connecting to a Bluetooth-capable

printer, you must check the Printer box on the

Services page.

2. From the Confirm screen, press Yes (left softkey) to

accept the connection from the external Bluetooth

device.

3. Enter the passcode (the same one used by the

initiating device) in the passcode field and press

Next (left softkey).

Due to different specifications and features of other

Bluetooth-compatible devices, display and

operations may be different, and functions such as

transfer or exchange may not be possible with all

Bluetooth-compatible devices.

Note

Although your device can connect to any Bluetooth-

compatible device, only two connections can be

made at a time. If an incoming pairing request is

rejected, you might need to disable pairing with

another device.

Note

Waiting for Pairing from an External Device

If you are going to be using a Personal Area Network

(PAN) profile to pair with a computer or PDA, you will

need to allow the other device to initiate pairing with

your phone.

To deactivate Bluetooth devices in your list:

1. Press the Power button, select Wireless Manager and

press

2. Highlight the Bluetooth field and press Menu

(right softkey) > Bluetooth Settings.

132

Section 2J. Bluetooth

3. Highlight an entry from the list, press

and press

To delete a Bluetooth device from your list:

Next (left softkey).

1. Press the Power button, select Wireless Manager and

4. Uncheck boxes for Services options by

press

highlighting an option and pressing

2. Highlight the Bluetooth field and press Menu

(right softkey) > Bluetooth Settings.

5. Press Done (left softkey) to return to the Bluetooth

Devices list.

3. Highlight a device and press Menu (right softkey) >

Delete.

To configure the settings of Bluetooth devices in your list:

1. Press the Power button, select Wireless Manager and

4. From the Confirm screen, press Yes (left softkey) to

delete the device or press No (right softkey) to

cancel.

press

2. Highlight the Bluetooth field and press Menu

(right softkey) > Bluetooth Settings.

Beaming Files

3. Highlight a device and press Menu (right softkey) >

Edit.

Using an active Bluetooth connection, you can beam

any data file (Contacts, pictures, video, text, etc.) directly

to another Bluetooth device. Both devices must be

active ( ), with visibility turned on, and the recipient

must accept the incoming data.

4. Use the keypad and

to change the device

name and press Next (left softkey).

5. Highlight an option and then press

to check or

uncheck the box for the option.

When you send data to another user, it is up to the

recipient to either accept the incoming data or reject

the connection. If you are sending a picture to a

6. Press Done (left softkey).

Section 2J. Bluetooth

133

Bluetooth-compatible printer, you may need the

passcode to establish a connection.

Beaming a Multimedia File

1. Press Start > All Programs >Pictures & Videos. (This

displays pictures and videos stored on the device.)

Beaming Contacts via Bluetooth

– or –

1. Press Start > All Programs >Contacts.

Press Start > All Programs >File Explorer > Menu

(right softkey) > Storage Card.

2. Select an entry and press Menu (right softkey) >

Send Contact > Beam. (Your device will search for

and list all discovered Bluetooth devices.)

2. Highlight an image and press Menu (right softkey)

> Beam.... (Your device will search for and list all

discovered Bluetooth devices.)

Each device that appears in the above search will

initially appear as "Unknown device." After a short

time the correct display names will appear.

Note

3. From the list of devices, highlight a device and

press Beam. (The recipient’s device will display an

onscreen message asking whether they would like

to receive and save your picture or video to their

device.)

3. Highlight a device and press Beam (left softkey) to

send the name card to this recipient. (The

recipient’s device will display an onscreen

message asking whether they would like to receive

and save your Contact entry to their list.)

Printing Pictures via a Bluetooth Printer

There are two ways you can print pictures via

Bluetooth:

ⅷ Using the Print via Bluetooth option. See “Printing

Pictures via Bluetooth” on page 124.

ⅷ Using the Beam option (see below).

134

Section 2J. Bluetooth

To print pictures via direct Beaming:

ⅷ Call holding and call switching

ⅷ Ending a call

1. Follow steps 1 and 2 in “Beaming a Multimedia

File.”

ⅷ Switching to a private call

2. From the list of devices, highlight a printing device,

For specific information about the features available

with your hands-free device, please refer to the user

Note

press Beam, and press

manual provided with your device.

Each device that appears in the above search will

initially appear as “Unknown device.” After a short

time the correct display names will appear.

Note

Bluetooth OBEX FTP

Using Hands-Free Devices

Your device can fully utilize the OBEX FTP (object

exchange file transfer protocol) application provided to

exchange data with other devices using Bluetooth

technology as the transport layer. To use your device as

a Bluetooth OBEX FTP server, ensure that your device's

visibility is turned on so that the OBEX FTP client can

both search for and then automatically establish an

OBEX FTP connection.

Your device allows pairing with hands-free devices.

Although the pairing process is similar to that of most

other Bluetooth devices, the Hands-Free option must

be enabled within the Services menu to take

advantage of this feature. (See “Pairing Bluetooth

Devices” on page 131.)

Some or all of the features below are available when

using a Bluetooth hands-free device.

ⅷ Voice recognition using the Voice Commands application

ⅷ Last number redial

Section 2J. Bluetooth

135

Bluetooth OBEX FTP Server Setting

Using a Bluetooth Virtual Serial Port

If the OBEX FTP client attempts an OBEX FTP

connection with your device, Bluetooth pairing is

usually required. The default shared folder of the OBEX

FTP server is “\My Documents”.

Many Bluetooth devices, such as GPS receivers,

support the Bluetooth serial port profile (SPP). You can

use your device’s virtual Bluetooth serial port to make a

Bluetooth serial connection with such devices.

Exchanging Files via an OBEX FTP Server

Assigning a Bluetooth Virtual Serial Port

When a client device attempts to upload files to or

download files from your device’s OBEX FTP server, a

dialog box opens asking, “Someone is trying to get

your files. Do you accept the request?” or “A new file

has arrived. Do you accept the incoming file?”.

1. Pair your phone with the target Bluetooth device.

(See “Pairing Bluetooth Devices” on page 131.)

2. From the Bluetooth Devices page, press Menu

(right softkey) > COM Ports > Menu (right softkey) >

New Outgoing Port.

(The message that is displayed depends on whether a

download or upload is requested.) In either case, press

Yes (left softkey) to confirm you want to allow an upload

to or download from your server.

3. Select a device from the list and press Select

(left softkey).

4. Select a COM port for the connection and press

Done (left softkey).

The port you selected above can now be used by other

applications available on your device. For example, you

can use this new port to communicate with a

third-party Bluetooth GPS device.

136

Section 2J. Bluetooth

Section 2K

Launching Internet Explorer

Your device comes with a version of Microsoft Internet

Explorer^®with many of the same features as the

browser you use on your computer.

Mobile Applications

ᮣ

Press Start > All Programs > Internet Explorer.

ࡗ

Launching Internet Explorer

Using Live Search

Navigating to a specific Web address

Using the RSS Reader

Using Internet Sharing

1. Press Menu (right softkey) > Address Bar.

2. Press and hold

to delete the default Web

There are almost no limits to the ways in which you can use your

device’s built-in applications to surf the Web and to find files and

information. This section outlines Mobile applications

such as: Internet Explorer^®, Live Search^®, and the RSS

Reader.

address.

3. Enter a new address beginning with www. and

press Go.

Ⅲ A list of recently visited Web sites may appear

below the address bar in the event you would like

to navigate to one of those Web sites without

having to retype the address.

Section 2K. Mobile Applications

137

1. Press Menu (right softkey) > View.

Adding a Web page to your Favorites list

2. Select Text Size to adjust the default text size used

by the browser to display onscreen content.

When you find a Web page that you would like to

revisit, it can be saved as a Favorite link.

Ⅲ Choose from Largest, Larger, Medium (default),

Smaller, or Smallest.

1. Press Menu (right softkey) > Address Bar.

2. Press and hold

address.

to delete the current Web

3. Select the format and orientation for pages

displayed on your screen. Choose from:

3. Enter a new address beginning with www. and

press Go.

Ⅲ One Column to display a page in a single-column

format.

Ⅲ Fit To Screen to force the page to fit your available

screen size.

4. When the page has fully loaded, press Menu

(right softkey) > Add to Favorites.

Ⅲ Desktop to retain the page's original format. (You

may need to scroll vertically or horizontally to view

the entire page.)

Ⅲ To alter the default entry name, press and hold

to delete the current name and then use the

keypad to enter a new name.

Ⅲ Full Screen to turn off menu and icon display to

view the page using your whole screen.

5. Press Add (left softkey).

Browser Display Options

4. The Show Pictures option can be deselected to

increase the speed at which Web pages are

loaded onto your screen.

You can change the way Web pages are displayed on

your screen. You can adjust text size, appearance, and

the speed that pages are loaded (by blocking pictures).

Ⅲ Highlight Show Pictures and press

to uncheck

this option if it is enabled.

138

Section 2K. Mobile Applications

7. Press Menu (right softkey) > Copy/Paste > Paste.

Copy and paste text from within the

browser

Zooming in on Web Pages

You can select text from within a Web page and then

copy it from the current Web page and paste it into the

text or message field of another application such as

SMS text or email.

Internet Explorer provides support for zooming while

viewing any active Web page. You can zoom out from

the Web page to best locate the information you desire

from a large Web page. This feature improves

readability, visibility, and usability by allowing readers to

see small onscreen text or images more clearly.

1. Press Menu (right softkey) > Copy/Paste > Select Text.

(This process converts the current page into

selectable text.)

1. From within an active Web page, press Zoom Out

(left softkey).

2. Use the navigation key to position the cursor at the

desired point in the text page. (Place it just before

the text you would like to cut or copy).

2. Use your navigation key to select an area of the

Web page.

3. Press Select (left softkey) and use the navigation

3. Press Zoom In (left softkey) to fill the screen with the

selected part of the Web page.

key to select text.

4. Press Copy (left softkey) to place the text into the

device’s clipboard (temporary memory storage).

5. Open the target application (email or SMS text

message.)

6. Use your navigation key to position the cursor in

either the reply text area of an SMS text message

or the body area of an email message.

Section 2K. Mobile Applications

139

5. Use your navigation key and keypad to begin your

searches:

Using Live Search

Ⅲ <Business or Category> to enter a term, keyword, or

business name as your search key.

Your device comes with a built-in Web search engine

called Live Search. This search engine provides ready

access to a variety of topics, searches, and maps. You

can even get visual directions to a specific address.

Ⅲ <City, State> to scroll through a list of available

cities to further refine a search.

● Highlight Choose a new location and press

to select a location that is not currently listed.

Using Live Search from the Start Menu

● Use the thumbwheel to scroll through the

alphabetical list of cities and select a location

that is not currently listed. You can choose a

specified city, from a map, or from Contacts.

1. Press Start > All Programs >Live Search.

2. Read the service agreement and press Accept

(left softkey).

3. Enter a text string to search. See “Entering Text” on

page 38.

– or –

Choose from one of the following search presets

(select the corresponding icon onscreen):

4. Once you’ve entered keywords press

to launch

the Live Search engine and view your results.

Ⅲ Categories to narrow your search by starting with a

main category and then refining your search.

● Select a category and then press the

navigation key right to expand a given

category, or down to scroll through a list of

categories. When you find the category you

want, press

140

Section 2K. Mobile Applications

Ⅲ Movies displays a listing of showtimes and

locations for movies showing within the selected

area.

These searches are based on the location currently

selected from the main Live Search screen.

Note

● Use your navigation key to select either the

Movies tab or the Theaters tab.

Ⅲ Map displays a map of the currently selected city.

● Press Menu (right softkey) to access options

such as Zoom Out, Zoom In, and View (Road,

Aerial, Full Screen, and Traffic).

● Scroll to a movie or theater and press

get more information.

Ⅲ Directions allows you to enter a start and end point

for the current city to get driving directions.

Using the RSS Reader

● Enter starting and ending locations and press

Route (left softkey) to begin receiving the

directions.

An RSS (Really Simple Syndication) reader is a

software application that resides on your device and

obtains syndicated Web content such as news

headlines, and blogs from different locations and

displays them to you in an easy-to-view stream on your

display screen.

Ⅲ Traffic provides a dynamic view of traffic

conditions that is updated every two minutes for

the currently selected city.

● Press Menu (right softkey) to access options

such as Zoom Out, Zoom In, and View (Road,

Aerial, Full Screen, and Traffic).

1. Press Start > All Programs > RSS Reader.

2. Press Menu (right softkey) > Update all. (This updates

the RSS feeds to all current categories.)

Section 2K. Mobile Applications

141

3. Press Done (left softkey) when updating has ended

to return to the RSS Reader - Feeds screen. (Each

RSS entry is listed with the number of feeds

currently available for that entry.)

Moving a Feed to Another Folder

1. Within a category folder, select a feed.

2. Press Menu (right softkey) > Edit > Move. (The

selected field should now be highlighted.)

Creating a New Folder

3. Move the navigation key up or down to relocate the

feed to a new folder and press Done (left softkey).

1. Press Menu (right softkey) > Edit > New folder.

2. Enter a name for the new RSS folder and press OK

(left softkey).

Searching for Feeds

1. Select a category folder.

Adding a New Feed

2. Press Menu (right softkey) > Feed search.

3. Enter a keyword to search.

1. Press Menu (right softkey) > Edit > New feed.

2. Enter the RSS URL for the feed, assign a folder

location for the newly created feed, and press OK

(left softkey).

4. Press Search (left softkey) to start. (Multiple search

engines will search on your keyword and return

any searches that match your criteria.)

Deleting a Current Feed

5. Select a search result from the list and press Add

(left softkey) to insert it into the currently selected

folder.

1. Within a category, select a feed.

2. Press Menu (right softkey)> Edit > Delete.

3. Read the confirmation screen and press Y es (left

softkey) to delete the sele cted feed or No (right

softkey) to cancel the operation.

142

Section 2K. Mobile Applications

3. Use either the navigation key or thumbwheel to

scroll to the PC Connection field and then select

either USB or Bluetooth PAN.

Using Internet Sharing

Internet Sharing lets you use your device as a modem

to connect your computer to the Internet from

anywhere on the Sprint National Network. This feature

works by using either a direct USB or wireless

Bluetooth connection to your computer.

Ⅲ The Network Connection field cannot be altered

and should read Phone as Modem.

If you chose USB above, any current ActiveSync

activity will stop.

Note

Internet Sharing requires a Phone As Modem service

plan. Please contact Sprint Customer Service to add

this plan to your account before using this feature.

4. Press Connect (left softkey) to establish an Internet

connection.

Ⅲ Confirm the connection by launching your

computer’s Web browser and going to a Web

address that you know is valid (for example,

www.yahoo.com, www.google.com, or www.msn.com).

Prior to using your device for Wireless Modem

communication, you must first register and

activate an active data services plan with

Sprint. To obtain this service plan, please

contact Sprint Customer Service

Important

1. Make sure you have the latest USB driver installed

on your computer.

Ⅲ See “Connecting with Your Computer” on

page 148.

2. Press Start > All Programs > Internet Sharing.

Section 2K. Mobile Applications

143

Section 2L

ActiveSync Requirements

The computer to which you install ActiveSync (v4.5 or

higher) must meet the following hardware and software

requirements:

Synchronizing with

ActiveSync

ⅷ Operating system: Microsoft Windows XP with SP1 or

later, Windows 2000 with SP4, Windows XP Tablet

PC Edition, or Windows Server 2003.

ࡗ

ActiveSync Requirements

ⅷ Web browser: Microsoft Internet Explorer 6 or later

(required)

Synchronization Overview

Setting Up and Configuring ActiveSync

Connecting with Your Computer

Setting up Windows Media Player Sync Options

Synching Music via Windows Media Player

Creating a Custom Ring Tone

ⅷ Storage: Hard-disk drive with 12 to 65 MB of free

space. (Actual requirements will vary depending on

features selected and system configuration.)

ⅷ I/O Port: USB port (1.0 or higher)

ⅷ Optical drive: CD-ROM drive

ⅷ Video card: VGA graphics card or compatible video

graphics adapter supporting 256 colors or more.

Your device features a built-in ActiveSync^®utility that allows you

to synchronize data between your computer and your device.

This software helps keep Contacts, Calendar, Tasks, or

Inbox data up-to-date.

This section details how to set up and make the most

of your ActiveSync features.

144

Section 2L. Synchronizing with ActiveSync

Ⅲ All selected synchronization items will be copied

from your computer to your device and Windows

Explorer will create a shortcut to the Mobile drive.

Installing ActiveSync on Your Computer

1. Insert the Software Installation CD into your

computer’s disc drive.

Synchronization Overview

2. Click the Setup and Installation link from the onscreen

disc menu.

Once you begin the synchronization process (by

connecting your device to your computer) the Microsoft

ActiveSync window should automatically open.

3. Click the Install button to begin the installation of

the ActiveSync application to your computer.

Ⅲ You can also download the latest version of

Microsoft^®ActiveSync from the Microsoft site at:

http://www.microsoft.com/windowsmobile/en-us/help/

synchronize/device-synch.mspx.

Your device will remain connected to the computer

after synchronization is complete. If any selected

content is changed on your computer (new email,

photos, playlist updates, etc.) Microsoft ActiveSync

automatically resyncs the information on the device.

You can open the device’s file directory in ActiveSync

on your computer by clicking Tools > Explore Smartphone

from the ActiveSync main menu. You can then copy

files quickly and easily from the device to the computer,

or vice versa.

If the ActiveSync option is grayed out, you may have

the application already installed. It is recommended

that you uninstall any previous version prior to

completing this new installation.

Note

4. Launch the setup program and follow the

onscreen instructions.

At the end of the installation process, you will see an

ActiveSync icon in your taskbar.

Ⅲ Synchonization will begin automatically the first

time your device is connected to your computer.

Section 2L. Synchronizing with ActiveSync

145

4. Connect the other end into the Power/Accessory

Interface Connector. (The Synchronization Setup

Wizard will launch on your computer and prompt

you to set up a sync partnership with the device.)

Setting Up and Configuring

ActiveSync

Your computer can assign a different profile to each

device that is connected to it via the ActiveSync

application.

1. Right-click the ActiveSync icon found in your

computer’s taskbar and select the Connection

Settings... option.

2. Make sure the following options are checked and

click OK:

Correct

Ⅲ Allow USB Connections

Ⅲ Open ActiveSync when my device connects

Incorrect

3. Connect one end of the USB data cable (included

with your device) into the USB port on your

computer.

146

Section 2L. Synchronizing with ActiveSync

Ⅲ To enable automatic email synchronization, check

the box for Save password.

Configuring ActiveSync Options

1. From the initial Synchronization Setup Wizard, click

Ⅲ Click Next to continue

Next to begin the setup process.

3. From the Synchronization Options screen, check

all information types you would like to synchronize

with your device and your computer. (Contacts,

Calendar, E-mail, Tasks, Favorites, Files, and Media.)

2. If you do not use Microsoft Exchange^®, skip to

step 3.

To set up an Exchange Server connection,

complete the following steps. (For more

information, please see the Set Up Your Email

guide included with your device.)

4. Click Next to continue.

5. Check the box for Allow wireless data connections if

you would like to allow this connection type

(usually disabled if your device is using an active

USB connection), and click Next.

Ⅲ Check the box in the Synchronize directly with a

server running Microsoft Exchange field and click Next.

The information in these fields is case-sensitive.

Some fields may have already been filled in by your

device upon connection.

Note

6. Click Finish to complete the setup process and

establish the partnership. ActiveSync will save the

settings and begin synchronizing your device with

your computer based on those settings.

Ⅲ Enter an Exchange Server Address (also known as

the Outlook Web Access server address).

Media synchronization can require that you launch

Windows Media Player to finish the process of setting

up the partnership.

Note

Ⅲ If your server requires an encrypted connection,

check the box for “This server requires an

encrypted (SSL) connection.”

Ⅲ Enter your User name, Password, and Domain

information.

Section 2L. Synchronizing with ActiveSync

147

2. Pair your device and your computer.

Connecting with Your Computer

Ⅲ Press Start > All Programs > Settings > Connections >

Bluetooth.

You can connect the device to your computer by one

of two methods:

Ⅲ Select Add new device.. and press

pair your phone with another Bluetooth device:”

on page 131.)

. (See “To

ⅷ Using a USB cable (page 147).

ⅷ Using a Bluetooth connection (requires a COM port

assignment).

3. Right-click the ActiveSync icon found in your

taskbar and select the Connection Settings option.

Using Bluetooth with ActiveSync

4. Check the Allow connections to one of the following

option and choose the COM port used by your

Bluetooth device from the drop-down list.

1. Ensure that your computer's Bluetooth radio is

turned on and visible.

5. Ensure that the Open ActiveSync when my device

option is checked, and click OK.

Ⅲ Your Bluetooth device will occupy a COM port

when actively in use on a USB port.

6. Right-click the ActiveSync icon found on your

computer's taskbar and select the Connection

Settings option.

The Bluetooth transmitter should be connected to an

available USB port. Refer to the Bluetooth device's

manual for specific setup and configuration

instructions.

Note

7. Click Connect.. to initiate the wireless

synchronization process.

148

Section 2L. Synchronizing with ActiveSync

Setting up Windows Media Player

Sync Options

If you choose to synchronize multimedia files (pictures,

video, and music), you will need to set up a sync

partnership between your device and your computer's

Windows Media Player.

It is recommended that you have the latest version of

Windows Media Player installed. (You can verify this by

clicking Help > Check for Updates... from the Media Player

menu.)

2. In the pop-up dialog box, click Yes to begin the

setup process.

1. From within the Synchronized items field (adjacent

to the Media entry) click the Setup must be completed

link.

3. Launch Windows Media Player. (Your device

appears within the left pane.)

Section 2L. Synchronizing with ActiveSync

149

4. Click on the Sync tab to launch the partnership

process.

Synching Music via Windows Media

Player

1. Click on any of the available library categories

(such as Artist, Album, or Songs) to display a list of

all current music files detected by Windows Media

Player.

Ⅲ For the purpose of this section, Artist has been

selected.

Songs that are copy-protected (DRM protection) will

not be transferred and can result in a transfer error

message.

Note

2. Select a song and drag it to the Sync List section

of the application (right pane). (The available

memory indicator will change depending on the

size of the selected song.)

Ⅲ If the Device Setup screen (shown above) does

not appear, right-click on the phone icon (left

pane) and select Setup Sync...

5. Enter a new name for the device (as it will appear

within the Windows Medi a Player’s left pane) and

click Finish.

150

Section 2L. Synchronizing with ActiveSync

Creating a Custom Ring Tone

You can create your own custom ring tones by using

ActiveSync to copy compatible music files to your

device.

ꢀ

1. From within the ActiveSync dialog, select the

ꢁ

onscreen Explore button.

2. Select a compatible audio file (MP3 or M4a without

DRM) and copy it to the My Windows Mobile-Based

Device\Application Data\Sounds folder.

ꢂ

3. If prompted, select OK to allow conversion of the

copied file for compatibility with your device. (The

ring tone will now be available from the Ring tone

field.)

3. When you have finished selecting songs, click Start

Sync to begin the upload process from your

computer to your device’s Music folder.

4. Press Start > All Programs > Settings > Sounds > Ring

Tone.

Ⅲ If this list is later updated on your computer, it will

be updated on your device during the next

synchronization session.

5. Press

, highlight the newly added ring tone

from the list, and press Done (left softkey).

Section 2L. Synchronizing with ActiveSync

151

Section 3

Sprint Service

Section 3A

Using Voicemail

Setting Up Your Voicemail

Sprint Service Features: The

Basics

All unanswered calls to your device are automatically

transferred to your voicemail, even if your device is in

use or turned off. Therefore, you will want to set up your

Sprint Voicemail and personal greeting as soon as

your device is activated.

ࡗ

Using Voicemail

Using SMS Text Messaging

Using Caller ID

1. Press and hold

2. Follow the system prompts to:

Ⅲ Create your passcode.

Responding to Call Waiting

Making a Three-Way Call

Using Call Forwarding

Ⅲ Record your name announcement.

Ⅲ Record your greeting.

Now that you’ve explored your phone’s fundamentals, it’s time

to learn about the calling features that enhance your Sprint

service. This section outlines your basic Sprint service

features. (For more information on email setup and

usage, please see the Set Up Your Email guide

included with your device.)

Ⅲ Choose whether to activate One-Touch Message

Access (a feature that lets you access messages

simply by pressing and holding

, bypassing

the need for you to enter your passcode).

154

Section 3A. Sprint Service Features: The Basics

Retrieving Your Voicemail Messages

Voicemail Passcode

Note

You can review your messages directly from your

wireless device or from any other touch-tone device.

If you are concerned about unauthorized access to

your voicemail account, Sprint recommends that you

enable your voicemail passcode (do not activate

One-Touch Message Access).

When you are roaming off the Sprint National

Network, you may not receive notification of new

voicemail messages. It is recommended that you

periodically check your voicemail by dialing 1 + area

code + your wireless phone number. When your

voicemail answers, enter your passcode. You will be

charged roaming rates when accessing voicemail

while roaming off the Sprint National Network.

Note

Voicemail Notification

There are several ways your device alerts you to a new

message:

ⅷ By sounding the assigned ringer type.

ⅷ By displaying

at the top of the Home screen.

Your device accepts messages even when it is turned

off. However, you are notified of new messages only

when your device is turned on and you are in a Sprint

service area.

New Voicemail Message Alerts

When you receive a new voice message, your device

alerts you and prompts you to call your voicemail.

To display your Missed Log:

You are charged for airtime minutes when you are

accessing your voicemail from your wireless device.

Note

ᮣ

Press

once

– or –

Press Start > All Programs > Call History.

Section 3A. Sprint Service Features: The Basics

155

Using One-Touch Message Access

Voicemail Key Guide

ᮣ

Press and hold

Here’s a quick guide to your keypad functions while

listening to voicemail messages. For further details and

menu options, see “Voicemail Menu Key” on page 159.

Using Another Device to Access Messages

1. Dial your wireless phone number.

2. When your voicemail answers, press

Date/Time

Replay

Send Reply

Rewind

Advance

Forward

Save

3. Enter your passcode.

When you call into voicemail, you first hear the

header information (date, time, and sender

information) for the message. To skip directly to the

message, press 4 during the header.

Tip

Erase

Return Call

Cancel

Help

Skip

156

Section 3A. Sprint Service Features: The Basics

Setting Up Group Distribution Lists

Voicemail Options

Create up to 20 separate group lists, each with up to

20 customers.

Your device offers several options for organizing and

accessing your voicemail.

1. Press and hold

to access your voicemail.

Using Expert Mode

2. Press

to change your Personal Options,

following the system prompts.

Using the Expert Mode setting for your personal

voicemail box helps you navigate through the

voicemail system more quickly by shortening the voice

prompts you hear at each level.

Ⅲ Press

3. Press

4. Press

to access the main voicemail menu.

for Settings.

1. Press and hold

to access your voicemail. (If

for Group Distribution Lists.

your voicemail box contains any new or saved

messages, they will play automatically.)

5. Follow the voice prompts to create, edit, rename, or

delete group lists.

2. Press

to change your Personal Options,

following the system prompts.

Sprint Callback (Return Call)

Ⅲ Press

3. Press

4. Press

to access the main voicemail menu.

for Expert Mode.

Return a call after listening to a message without

disconnecting from voicemail.

Press

after listening to a message. (Once the call is

to turn Expert Mode on or off.

complete, you’re returned to the voicemail main menu.)

Section 3A. Sprint Service Features: The Basics

157

Voicemail-to-Voicemail Message

Voicemail-to-Voicemail Message Forwarding

Record and send a voice message to other Sprint

Voicemail users.

Forward a voice message, except those marked

“Private,” to other Sprint Voicemail users.

1. From the main voicemail menu, press

to send

1. Press and hold

to access your voicemail.

a message.

2. After listening to a message, press

2. Follow the voice prompts to enter a phone number.

3. Follow the voice prompts to record your

introduction to the message and forward the voice

message.

3. Follow the voice prompts to record and send your

voice message.

Voicemail-to-Voicemail Message Reply

Voicemail-to-Voicemail Receipt Request

Reply to a voice message received from any other

Sprint Voicemail user.

Receive confirmation that your voice message has

been listened to when you send or forward messages

to, or reply to messages from other Sprint users.

1. Press and hold

2. Press to listen to your new voicemail.

3. After listening to a voice message, press

Follow the voice prompts to record and send your reply.

to access your voicemail.

1. After you have recorded a message, press

listen to the message and indicate that you are

satisfied with the message you recorded.

2. Press

3. Press

4. Press

for more options.

to mark receipt requested.

to send your voicemail message.

158

Section 3A. Sprint Service Features: The Basics

Extended Absence Greeting

Voicemail Menu Key

When your device is turned off or you are off the Sprint

National Network for an extended period, your device

can play this greeting instead of your normal personal

greeting.

Following the prompts on the voicemail system, you

can use your keypad to navigate through the voicemail

menu. The following list outlines your device’s

voicemail menu structure.

1. From the main voicemail menu, press

for

Listen

Personal Options.

Date and Time Information

Send a Reply Message

Advance a Few Seconds

Replay

2. Press

for Greetings.

to create an Extended Absence Greeting.

3. Press

4. Follow the voice prompts to record your greeting

and press

Rewind a Few Seconds

Forward Message

Erase

Return This Call

Save

Options

Skip to the Next Message

Section 3A. Sprint Service Features: The Basics

159

Send a Message

Using SMS Text Messaging

Personal Options

Settings

With SMS Text Messaging, you can send and receive

instant text messages between your device and

another messaging-ready device. When you receive a

new message, it will alert you by sounding the

Skip Passcode

Autoplay

assigned ringer type and then displaying the SMS icon

Play Back Date, Time, and Caller Info.

Change Passcode

(

) at the top of your screen.

In addition, SMS Text Messaging includes a variety of

preset messages, such as “I’m running late, I’m on my

way,” that make composing messages fast and easy.

Use your device to customize your own preset

messages (up to 160 characters).

Group Distribution Lists

Numeric Paging

Return to Personal Options Menu

Greetings

Personal Greetings

Name Announcement

Extended Absence Greeting

Return to Personal Options Menu

Expert Mode

Place a Call

Exit

160

Section 3A. Sprint Service Features: The Basics

4. Press Menu (right softkey) > Check Names. Recipient

names currently used within the To field will be

verified against the current Contacts list.

Composing SMS Text Messages

1. Press Start > All Programs > Messaging > Text

Messages.

Ⅲ Contacts to select a recipient from your Contacts

list (qualifying Contacts entries must contain a

wireless phone number).

2. Press Menu (right softkey) > New.

3. Enter the first few characters of a Contacts entry’s

Ⅲ Mobile phone number to manually enter a wireless

phone number that is not in Contacts.

name and from the list of matching entries, select an

entry and press

Contact

entry’s email

address

Contacts

entry’s phone

Use semicolons to separate multiple recipients.

Note

5. Enter a message or choose one of the preset

messages available within the My Text area.

Ⅲ To use a preset message, press Menu (right softkey)

> My Text, select a message, and press Insert

(left softkey).

Ⅲ You can have any combination of both preset

messages and text within your message.

There is a 160-character limit for text messages. No

pictures can be attached to SMS text messages.

Note

– or –

Press Menu (right softkey) > Add Recipients, select a

Contacts entry, and press . (You may include an

unlimited number of recipients per message.)

Section 3A. Sprint Service Features: The Basics

161

6. Review your message and select additional

messaging options by pressing Menu > Message

Options and checking boxes for any options you

wish to enable.

Accessing SMS Text Messages

To read an SMS Text message:

When you receive a text message, it will be displayed

automatically on your device’s screen (

Ⅲ Request message delivery notifications notifies you

when the message has been successfully

delivered.

1. Use your navigation key or thumbwheel to select

the SMS option from the Message Access section,

Ⅲ Priority assigns a priority to the outgoing message

(Normal or High).

and press

2. Select the message from the list and press

Ⅲ Send a callback number sends your callback

number as part of the outgoing text message.

Ⅲ Callback number allows you to either use your

default phone number or a different number.

7. Press Done (left softkey) to return to the main

message.

8. Press Send (left softkey) to deliver your message.

Text Message and Email Quick Access

162

Section 3A. Sprint Service Features: The Basics

To reply to an SMS Text message:

3. Review your reply and press Send or press

(Select additional messaging options by pressing

1. While the message is open, begin typing a reply.

Menu [right softkey] > Message Options.)

SMS text

message

recipient

Text thread

Ⅲ Once your receive a response, the recipient’s

name and time of the message are color-coded,

and their response is then displayed below your

previous text message.

Ⅲ Repeat steps 2 -3 to continue the text thread

(conversation).

To stop an SMS Text message conversation:

1. Press Start > All Programs > Messaging > Text

Messages.

2. With the text thread (conversation) still open, press

Menu (right softkey) > Close. (This stops the current

conversation. If another text message is received

from the same recipient and you respond to it,

it becomes a new SMS text conversation.)

Your response

2. Compose your reply or use a preset message.

Ⅲ To type a message, use the keypad to enter your

message.

Ⅲ To use a preset message, press Menu

(right softkey) > My Text, highlight a message, and

press Insert (left softkey).

Section 3A. Sprint Service Features: The Basics

163

To delete multiple SMS Text messages:

3. Select one of the following options:

Ⅲ All highlights every item in the current list.

1. Use your navigation key or thumbwheel to select

the SMS option from the Message Access section,

Ⅲ All Below highlights only those items in the list

below the currently selected list item. This option

is grayed out (unavailable) if there is nothing

below the currently highlighted list item.

and press

– or –

Press Start > All Programs >Messaging > Text

Messages.

Ⅲ Several allows you to use your navigation key or

thumbwheel to manually highlight list items.

2. Press Menu (right softkey) > Select Messages.

4. Press Delete (left softkey) > Yes (left softkey).

Selection

options

List View

164

Section 3A. Sprint Service Features: The Basics

To delete a preset message:

Using Preset Messages

1. Select a preset message from the list and press

Menu (right softkey) > Edit My Text. (The entire

messages is highlighted.)

Preset messages make sending text messages to your

friends, family, and co-workers easier than ever. My Text

messages let you quickly insert commonly used

phrases into the body of a new message or a reply to a

message.

2. Press and hold

to delete the message.

3. Press Done (left softkey) to complete the deletion,

or press Cancel (right softkey) to cancel the

deletion.

To add a preset message to a text message:

1. While the message is open, position the cursor to

where you would like the preset message to go.

Using Caller ID

2. Press Menu (right softkey) > My Text.

3. Highlight a message to insert, and press Insert (left

Caller ID allows people to identify a caller before

answering the device by displaying the number of the

incoming call. If you do not want your number

displayed when you make a call, follow these steps.

softkey).

To edit a preset message:

ᮣ

Select an existing preset message and press Menu

1. Press

2. Enter the number you want to call.

3. Press

> Edit My Text and use the keypad to edit or replace

the message and press

on page 38.)

. (See “Entering Text”

To permanently block your number, call Sprint

Customer Service.

Section 3A. Sprint Service Features: The Basics

165

Responding to Call Waiting

Making a Three-Way Call

When you’re on a call, Call Waiting alerts you to

incoming calls by sounding two beeps. Your device’s

screen informs you that another call is coming in and

displays the caller’s device number (if it is available and

you are in digital mode).

With Three-Way Calling, you can talk to two people at

the same time. When using this feature, the normal

airtime rates will be charged for each of the two calls.

1. Enter a number you wish to call and press

2. Once you have established the first connection,

press and wait for a dial tone. (This puts the

To respond to an incoming call while you’re on a call:

first caller on hold and dials the second number.)

ᮣ

Press

. (This puts the first caller on hold and

answers the second call.)

3. Dial the second number you wish to call and press

To switch back to the first caller:

4. When you’ve connected to the second party, press

ᮣ

Press

again.

again to begin your three-way call.

For those calls where you don’t want to be

Tip

If one of the parties in the current call hangs up, you

and the remaining caller still remain connected.

interrupted, you can temporarily disable Call Waiting

by pressing *70 before placing your call. Call Waiting

is automatically reactivated once you end the call.

If you initiated the call and are the first to hang up, all

other callers are disconnected.

166

Section 3A. Sprint Service Features: The Basics

To deactivate Call Forwarding:

Using Call Forwarding

ᮣ

From your device, press

. (You

will see a message and hear a tone to confirm the

deactivation.)

Call Forwarding lets you forward all your incoming calls

to another phone number – even when your device is

turned off. You can continue to make calls from your

device when Call Forwarding is activated.

You are charged a higher rate for calls you have

forwarded.

Note

You cannot forward your calls to an international

number.

Note

To activate Call Forwarding:

1. Press

2. Enter the area code and phone number to which

your future calls should be forwarded.

3. Press

. (You will see a message and hear a

tone to confirm the activation of Call Forwarding.)

Section 3A. Sprint Service Features: The Basics

167

Section 3B

Using the Sprint Software Store

The Sprint Software Store provides quick and easy

access to a variety of applications, games, ringers, and

screen savers directly from within your device.

Software Store and TV

1. Press Start > All Programs > Software Store and

ࡗ

Using the Sprint Software Store

Your Sprint TV Channel Options

Playing a Video or Audio Clip

Sprint TV FAQs

press

2. Use the navigation key or thumbwheel to select an

entry from the list and press

Ⅲ Applications: to purchase, upload and then install a

With your Samsung ACE^TM, you have access to a dynamic variety

of Premium Services content, such as downloadable Games,

Ringers, Screen Savers, and other applications. Sprint TV gives

you the ability to listen to audio clips and to view video clips right

from your device’s display. It’s a great way to stay up-to-

date on news, weather, and sports information while

also enjoying the latest movie trailers or music videos –

anywhere, anytime on the Sprint National Network.

selected application onto your device.

Ⅲ Games: to purchase mobile device game software

such as Frogger^®and Tetris^®.

Ⅲ Ringers: to purchase and upload ringers.

Ⅲ Screen Savers: to purchase and upload images to

use as your device’s screen saver.

This section explains the basic steps required to

access and download Premium Services content and

the features and options of your device’s Sprint TV

capability.

168

Section 3B. Software Store and TV

ⅷ News & Weather

ⅷ Movies & Shorts

Your Sprint TV Channel Options

The Sprint TV application offers a wide variety of

accessible channels. Subscription options include

comprehensive basic packages as well as a full menu

of “a la carte” channels. Visit www.sprint.com for more

information on channels and pricing.

Playing a Video or Audio Clip

1. Press Start > All Programs > Sprint TV. Depending on

your settings, you may be asked to accept a data

connection.

Available categories and content are subject to

change.

Note

2. If you are prompted to acknowledge the

connection to the Sprint Network, press

(to

note show the message again) and then press

Continue (right softkey).

Some of the available categories may include:

ⅷ Sprint Radio

Ⅲ If you are asked to upgrade your Sprint TV

software, press Yes (left softkey) to install the

necessary files into the default My Documents

folder.

ⅷ Sprint PowerView

ⅷ Primetime TV

ⅷ Music Videos

Ⅲ If you are prompted with a ‘Continue Installation?’

message, press Yes (left softkey).

ⅷ Sprint TV Live

ⅷ Music & Radio

ⅷ Sports

Ⅲ Follow the onscreen instructions to complete the

update process.

ⅷ Entertainment

3. Select Sprint TV, More Channels , or Sprint TV En Vivo to

display channel options.

ⅷ Cartoons

Section 3B. Software Store and TV

169

4. Use your navigation key and press

channel from the Sprint TV listings or to select an

available category.

to select a

Sprint TV FAQs

1. Will I know if I’m receiving an incoming call while I’m

viewing or listening to a media clip?

The first time you access a channel, you will be

prompted to purchase access (unless the channel

doesn't have a monthly fee). Select Subscribe to

purchase access, or select Preview to view a preview

of the selected channel.

Note

Yes. Your selected media will pause and an

onscreen message will launch asking if you would

either like to Accept the incoming call or Ignore it,

which then routes the incoming caller to your

voicemail. Once the call has been ended, your

previous media program will resume playback.

5. If applicable, select a clip and press

download the view the program. The clip will

automatically begin playing once the download is

complete.

2. How long are the clips? Will I know the estimated time it will

take to play the clip prior to accessing it?

Once you have selected a channel, you will see a

listing of the available clips, with each clip’s length

displayed after the clip’s title. In general, a clip’s

duration will depend on the story or content being

provided, and can be fairly short or as long as a

few minutes.

While you are playing a clip, you can press the

navigation key up and down to surf to a different

channel. A small pop-up screen will be displayed

that tells you which channel you are watching as well

as other channels that you have access to. Use the

navigation key to scroll through the channels. Once

you find a channel that you want to watch or listen to,

Tip

scroll to it and press

(or simply wait approximately

three seconds), and the channel will begin loading.

170

Section 3B. Software Store and TV

3. Can I access a clip wherever I am, as long as I have my

7. What does it mean when the video pauses and I see the

device?

word “loading” at the bottom of the screen?

As long as you are on the Sprint National Network,

you will have access to the audio and video clips.

This happens when the device is loading the data

necessary to play the clip. It typically occurs when

there is heavy traffic on the network.

Sprint TV Service does not work while roaming off of

the Sprint National Network or where service is

unavailable.

Note

8. How can I cancel service if I decide I don’t want it?

To cancel your Sprint TV service, visit

www.sprint.com and sign on to My Sprint Wireless with

your account number and password. From this

page, you have the ability to cancel the service or

any channels to which you subscribe.

4. Are the videos that I’m viewing “live” videos?

It depends on the content provider. Some of the

channels available through Sprint TV stream live

content. Others provide media on demand with

video and audio clips that are refreshed throughout

the day, but that are not “live.”

9. Can I surf to a different channel while I am playing a clip?

Yes. While you are playing a clip, you can use the

up and down navigation keys to surf to a different

channel. A small pop-up screen will be displayed

that tells you which channel you are watching as

well as other channels that you have access to.

Use the navigation keys to scroll through the

different channels. Once you find a channel that

5. After purchasing access to an Available Channel for a

monthly fee, do I receive any confirmation? That is, how do

I know it has been purchased?

The next time you access the channel, you bypass

the Preview/Purchase page and go directly to the

available content.

you want to watch, scroll to it and press

(or

simply wait approximately three seconds), and the

channel will begin loading.

6. If I don’t subscribe to a data service plan, will I still be able to

view the Sprint TV clips?

Yes. For service access charges, please consult

your Sprint service plan or visit www.sprint.com.

Section 3B. Software Store and TV

171

Section 3C

Your SIM Card

Your device comes with a preinstalled SIM (Subscriber

Identity Module) card to support roaming on

compatible GSM networks. The SIM card must be

activated for international wireless service prior to its

initial use (outside of the United States).

Sprint Worldwide

Wireless Service

To activate Sprint Worldwide service:

ࡗ

Your SIM Card

Using Your Device in GSM Mode

Using Your SIM Card’s PhoneBook

Setting GSM Services Options

Contacting Sprint

ᮣ

Call Sprint Worldwide Customer Service at

1-888-226-7212, option 2.

For more help with Sprint Worldwide international

setup, press Start > All Programs > International Usage

(using the navigation key as needed to scroll through

icons) to display a brief set of onscreen GSM setup

instructions.

Services

Selecting a Network

Your device allows you to roam throughout the world using both

CDMA (Code Division Multiple Access) and GSM (Global

System for Mobile Communications) networks. For a

complete list of countries and features available, visit

www.sprint.com/international.

Your SIM card should be preinstalled. If you need to

reinstall your SIM card, see “Removing Your SIM

Card” on page 173. The SIM card included with your

device contains information specific to your device

and should be retained with the device for use on

GSM networks.

Note

172

Section 3C. Sprint Worldwide Wireless Service

3. Carefully remove the SIM card from the slot (shown

below).

Removing Your SIM Card

The SIM card comes preinstalled but can be removed

if necessary.

1. Remove the battery cover.

Ⅲ Press down with thumbs as indicated below.

Ⅲ While applying pressure, slide cover away from

the camera lens (as shown below).

4. Reinstall the battery.

Ⅲ Insert the battery into the opening on the back of

the device, making sure the connectors align.

Gently press down to secure the battery.

Ⅲ Position the battery cover and firmly slide it in until

you hear a click.

2. Remove the battery to gain access to the SIM card

slot.

Section 3C. Sprint Worldwide Wireless Service

173

5. Press

device on.

to turn the

Using Your Device in GSM Mode

Ⅲ Your device will turn on,

search for Sprint service,

and then enter standby

mode.

Sprint offers voice service on CDMA networks in

nearly 40 countries around the world; accessing

service in these countries is as simple as powering

on your device. Call Sprint Worldwide Customer

Service before your trip to verify your service allows

for international dialing. In countries where CDMA

service is not available you will need to access a

GSM network.

Note

Ⅲ If your device is not yet

activated, or if it is

locked, see “Activating

Your Device” on page 5

for more information.

Ⅲ If your device does not

detect a SIM card while

in GSM mode, it will display

Entering GSM Mode

in the

Once you have installed the SIM card, your device may

be used in GSM mode on GSM networks while

traveling internationally. To operate on international

GSM networks, you need to switch the device from

CDMA (default) mode to GSM mode.

upper-right corner of the Home screen.

Your device’s battery should have enough charge to

turn on, find a signal, set up your voicemail, and

make a call. You should fully charge your battery as

soon as possible. See “Charging the Battery” on

page 26 for details.

Note

174

Section 3C. Sprint Worldwide Wireless Service

To enter GSM mode from CDMA mode:

Making and Answering Calls in GSM Mode

1. Press Start > All Programs > Service Mode. The

following options are available in the selection

window:

When traveling on international GSM networks while in

GSM mode, you can place and answer calls the same

as in CDMA mode. See “Making and Answering Calls”

on page 29. Certain features and services are not

available in all countries.

Ⅲ Sprint CDMA

Ⅲ Int’l GSM

Visit www.sprint.com/international for more information on

services that are available while roaming.

2. Use the navigation key to select Int’l GSM and then

press Apply (right softkey). A Confirm Reset screen

appears asking if you wish to change phone

modes.

Calling Emergency Numbers in GSM Mode

When traveling on international GSM networks while in

GSM mode, you can place calls to emergency services

(even if your account is restricted or Call Barring is

active.)

Ⅲ Type ‘yes’ in the text box and press OK

(right softkey). The device will power off and then

restart in GSM mode.

While in the United States, your device will operate

only in CDMA mode; domestic GSM networks will

not be accessible via this device.

Note

To place calls to emergency services:

ᮣ

Press

Section 3C. Sprint Worldwide Wireless Service

175

Using Plus (+) Code Dialing

Direct Dial

Placing calls from one country to another country is

simple with the Plus (+) Code Dialing feature. When

placing international calls, you can use Plus Code

Dialing to automatically enter the international access

code for your location (for example, 011 for

To place an international call by dialing direct:

ᮣ

Dial the international access code, the country

code, the city or area code, and the phone

number, and then press

to send the call.

international calls placed from the United States).

Making Calls Within a Country (Local or Long

Distance Dialing)

To use Plus Code Dialing to place an international call:

1. Press and hold

until a “+” is displayed on the

device’s display screen.

The steps for placing an international call within the

same country are identical to those for calling country-

to-country, except it is not necessary to enter the

country code.

2. Enter the country code, city code or area code,

and the phone number you’re calling, and then

press

Calling the United States from Another Country

(The access code for international dialing will

automatically be dialed, followed by the country

code, city or area code, and the phone number.)

To place a call to the United States from another country:

1. Press and hold

to display the “+” symbol. The

“+” symbol automatically inserts the exit code for

the country from which you are calling.

2. Press

to insert the U.S. country code, and then

enter the area code and number.

3. Press to finish dialing the number.

176

Section 3C. Sprint Worldwide Wireless Service

Calling Other Countries

International Data Roaming

To place from one country to another country:

Sprint Worldwide Wireless Service can also keep you

connected via email and Web browsing when traveling

in countries in which Sprint offers data service. Data

services are available on both CDMA and GSM

networks; check www.sprint.com/international to

determine the services available where you are

traveling.

1. Press and hold

to display the “+” symbol. The

“+” symbol automatically inserts the exit code for

the country from which you are calling.

2. Enter the country code of the person you are

calling.

3. Enter the area code without the leading zero,

Prior to using your Sprint Worldwide GSM Data

Services, you must establish and utilize your CDMA

data services domestically on the Sprint National

Network.

Note

followed by the number of the person you are

calling and press

Retrieving Voicemail Messages

Your device uses the same Voicemail box for both

Sprint CDMA and GSM modes.

To retrieve voicemail messages:

1. Dial the international access code (or if in GSM

mode, press and hold

until a “+” symbol

appears on your device display).

2. Enter followed by your 10-digit phone number.

3. When you hear the voice greeting, press and

enter your password, followed by

Section 3C. Sprint Worldwide Wireless Service

177

Selecting a specific carrier is necessary only for

providers on the GSM network. If your device has

automatically selected a GSM network while traveling,

you will need to set the device to CDMA to access

CDMA data services.

Getting Started with Data Services

Before you can use Sprint Worldwide Data Services,

you must first have these services activated on your

account.

ᮣ

To activate, call Sprint Worldwide Customer

Service at 1-888-226-7212, option 2. Representatives

are available 24 hours a day, 7 days a week to

assist you.

Visit www.sprint.com/international for a list of services

available for each country.

Using Your SIM Card’s PhoneBook

Once your services are activated, you may need to

select a GSM data services provider for the country

you’re in. (See “Selecting a Network” on page 183.)

Your SIM card contains its own phone book that is

separate from your device’s internal Contacts list. You

can update and maintain the SIM PhoneBook

whenever your device is in GSM mode, even if you are

not in a GSM service area.

Accessing Your Email and Data Services

on CDMA Networks

If data service is available on a CDMA network, then

you only need to set the phone to CDMA mode; you will

not need to select the specific carrier. See “Using Your

Device in GSM Mode” on page 174.

Your device must be in GSM mode for you to access

the SIM card.

Note

While the phone is in GSM mode, device can edit

Contacts stored within both the device and SIM card.

While the device is in CDMA mode, the device can

not access Contacts stored on the SIM card.

178

Section 3C. Sprint Worldwide Wireless Service

When saving a Contacts entry to your SIM card, note

that only the name and number are saved. Entries

stored on the card do not contain any detailed

information that may be stored in the device's internal

memory. To store additional information for a particular

contact, such as email addresses or dates, it is

important to save that information to your device’s

onboard memory.

Each Contacts entry stored on the SIM card can use

only one phone number, and the entry’s name can be a

maximum of 255 characters.

Adding Entries to the SIM PhoneBook

Adding new entries to your SIM PhoneBook is similar

to adding entries to the device’s internal Contacts list.

To add a new SIM card phone book entry:

When a SIM card is active, the Contacts list will then

display two types of entries:

1. Press Start > All Programs > Contacts > New (left

softkey) > SIM Contact.

2. Enter a name and phone number for the new

entry. (See “Entering Text” on page 38.)

Contacts entry - SIM Card

Contacts entry - Phone

3. Press Done (left softkey) to store the new entry into

the SIM card’s Contacts list.

Section 3C. Sprint Worldwide Wireless Service

179

Move or Copy Contacts Entries to the SIM

PhoneBook

Deleting All SIM PhoneBook Entries

To delete all SIM PhoneBook entries:

You can also copy entries from your device’s Contacts

to your SIM PhoneBook.

1. Press Start > All Programs > Contacts > Menu

(right softkey) > Delete All > SIM.

To copy Contacts entries to your SIM PhoneBook:

1. Press Start > All Programs > Contacts.

2. Press Menu (right softkey) > Copy All.

3. Select a copy option:

2. Press Yes (left softkey) to delete all contacts from

the SIM card or No (right softkey) to cancel.

Setting GSM Services Options

Ⅲ SIM to Phone to copy all your contacts from your

SIM Card to your device's onboard memory.

There are several user options available for GSM

operation under your device’s Settings menu, including

Call Diverting, Call Barring, Call Waiting, and GSM

Network Selection. All these options require that your

device be in GSM mode and in a GSM roaming

coverage area. (See www.sprint.com/international for

maps showing where international GSM coverage is

available, and see “Entering GSM Mode” on

page 174.)

Ⅲ Phone to SIM to copy all your Contacts from your

device to your SIM card. Note that only the name

and number will be saved to the card.

The SIM PhoneBook provides three default fields

(Name, Phone Number, and Index). This information

is stored on your SIM card to provide information

mobility. When phonebook entries are moved or

copied to Contacts, all input fields are available for

entry; however this information is not stored on the

SIM card.

Note

180

Section 3C. Sprint Worldwide Wireless Service

There is no charge for this call from your Sprint wireless

device.

Using Call Barring (GSM)

Call Barring allows you to block certain types of

incoming and outgoing calls on your device. This

would be useful, for example if you allowed someone

to use your device for a short period of time.

From a landline phone when outside the United States:

Sprint Worldwide Customer Service can be reached

from a landline phone at +1-817-698-4199, option 2.

Access or connection fees may apply. The toll-free

numbers below can also be used to contact Sprint

Worldwide Customer Service in the following countries.

To activate Call Barring (GSM):

1. Press Start > All Programs > Settings > Phone > Call

Barring.

2. Follow the onscreen instructions.

Country

From Landline Phone

1-888-226-7212

Anguilla

Contacting Sprint

1-888-226-7212

Barbados

Cayman Islands

China

Sprint Worldwide Customer Service is available to

answer your questions 24 hours a day, 7 days a week.

Please call the numbers below if you need assistance.

1-888-226-7212

00-1-800-713-0750

1-888-226-7212

While in the United States:

Dominican Republic

France

ᮣ

Call 1-888-226-7212, option 2.

While traveling outside the United States:

Call +1-817-698-4199, option 2.

0800-903200

ᮣ

0800-180-0951

Germany

Section 3C. Sprint Worldwide Wireless Service

181

Call Waiting

Country

From Landline Phone

800-787-986

Call Waiting notifies you of an incoming call even while

you’re in a call. You can then accept, reject, or ignore

the incoming call. Unlike Call Waiting in CDMA mode,

Call Waiting in GSM mode must first be activated.

Italy

001-877-294-9003

1-800-201-7545

Mexico

Trinidad and Tobago

United Kingdom

To use Call Waiting Internationally:

Call waiting in GSM mode must first be enabled as

follows:

0808-234-6616

1. Press Start > All Programs > Settings > Phone >

Call Waiting.

Services

2. Place a check mark in the “Provide call waiting

Caller ID

notifications” field and press

Caller ID displays the number (and name, if in your

PhoneBook) of incoming calls. Caller ID in GSM mode

must be enabled by the user.

Voicemail and Text Messages

To activate voicemail settings:

1. Press Start > All Programs > Settings > Phone >

To enable or disable caller ID:

Call Options.

1. Press Start > All Programs > Settings > Phone >

Caller ID.

2. Select the Voicemail number field. The number to

call your voicemail is then displayed.

2. Press Everyone , No one, or Only my contacts and

press

182

Section 3C. Sprint Worldwide Wireless Service

3. To change the number, press and hold

erase the numbers, then use the keypad to enter a

new number and press

2. From the Network selection field, select Automatic or

Manual.

3. Press Menu (right softkey) > Find a New Network.

Ⅲ If you selected Automatic in step 2, the system will

provide the best available network in your area

and then assign it to your device.

This number is automatically set up when you

receive your device. You will probably not need to

change it unless otherwise instructed by your carrier.

Note

Ⅲ If you selected Manual in step 2, you will need to

choose from the onscreen list of available

networks and then manually make the

assignment.

Selecting a Network

To access your email and browse the Web when

traveling, you may need to manually select the carrier

that provides Sprint service in your location. You can

find a list of carriers for each country where GSM data

service is offered at www.sprint.com/international. Then,

follow the instructions below to select the appropriate

carrier network on your device.

Ⅲ Use the navigation key to highlight an available

network and press Set Networks (left softkey). The

settings are then sent to the network.

4. Press

to complete the process and save the

new settings.

When traveling, it may be necessary to select a new

compatible GSM data service carrier each time you

enter a new country.

Note

To select a GSM data service for a specific country:

1. Press Start > All Programs > Settings > Phone > More... >

Networks.

Ⅲ The Current Network field displays a description

of the currently active network.

Section 3C. Sprint Worldwide Wireless Service

183

Viewing Your Preferred Networks

1. Press Start > All Programs > Settings > Phone >

More... > Networks.

Ⅲ The Current Network field displays a description

of the currently active network.

2. From the Network selection field, select Manual.

3. Press Menu (right softkey) > Preferred Networks.

To add a new preferred network:

1. Repeat steps 1 - 3 from “Viewing Your Preferred

Networks” to access the Preferred Networks

screen.

2. Press Menu (right softkey) > Add.

3. Use the navigation key to select a new network

from the available list and press Select (left softkey).

(This newly added network then appears on the

Preferred Networks screen.)

184

Section 3C. Sprint Worldwide Wireless Service

Section 3D

Before You Begin

Sprint Navigation requires that your device’s Location

setting is activated. Location is set to On by default.

GPS Navigation

To turn Location on:

ࡗ

Before You Begin (page 185)

1. Press Start > All Programs > Settings > More... > More... >

Other Settings > Location.

Using Sprint Navigation (page 186)

Getting Driving Directions (page 187)

Launching the Product Tour (page 194)

2. Press OK (left softkey).

3. Read the disclaimer and press OK (left softkey).

Sprint Navigation lets you fully use your device’s built-in GPS

hardware to easily access both directional information and

location-ready features such as nearby companies and

services. See and hear turn-by-turn directions to a

known address, or find nearby stores, banks or gas

stations. And get up-to-the-minute information about

traffic conditions and alternate routes.

4. Select Location on and press Done (left softkey). See

“Location Settings” on page 51.

Registering for Service

Before you can fully take advantage of the navigation

feature, you must first properly register your device.

1. Press Start > All Programs > Sprint Navigation.

Section 3D. GPS Navigation

185

2. Use the navigation key to select a text box, and

then use the keypad to enter the required

information.

Using Sprint Navigation

1. Press Start > All Programs > Sprint Navigation.

Ⅲ First Name, Last Name, and Email Address.

2. Select an option and follow the onscreen

instructions to take advantage of Sprint

Navigation’s full suite of features.

3. Press Login (right softkey) to register your

information.

4. Read the warning disclaimer and press Go

(right softkey) to acknowledge the terms of use.

Ⅲ Drive To lets you get driving directions from

wherever you are to wherever you’re going.

Choices include:

5. Select Yes to take a brief tour of Sprint Navigation’s

features, or No to continue to the main navigation

screen.

●

My Favorites: user-defined favorite locations.

Recent: recently entered locations.

Ⅲ If you wish to take the tour, press Next (right

softkey) to progress through each page of the

tour, or press Quit Tour (left softkey) to exit the

presentation.

Business: locations based on business

categories.

●

Address: manually entered street addresses.

Intersection: used to locate a specific address

by using two separate street addresses to

identify an intersection.

The option to take the Product Tour is displayed only

during the initial login to Sprint Navigation. If you

would like to take the tour after that, please see

“Launching the Product Tour” on page 194.

Note

●

Airport: local airports based on current GPS

location.

186

Section 3D. GPS Navigation

Ⅲ Search lets you search for locations from dozens

of options such as food and drink, hotels and

motels, banks and ATMs, and parking.

Getting Driving Directions

The built-in GPS hardware (when enabled) allows you

to get driving directions to selected locations or

establishments based on your current location.

● Locations can be spelled out, searched from

recent locations, or chosen from other

categories.

Ⅲ Maps & Traffic provides access to 2D and 3D maps

for your current location and for several

categories of locations such as airports,

intersections, and businesses.

Using a Known Address

1. Press Start > All Programs > Sprint Navigation >

Drive To > Address.

2. Select Type It or Speak It and press

Ⅲ Type It requires that you enter the physical address

Ⅲ Tools & Extras offers additional options, such as

sharing your location with contacts, creating and

storing My Favorites locations, accessing the

product tour, enabling a real-time compass, and

setting detailed application preferences.

using either the keypad or onscreen keyboard.

Ⅲ Speak It to place a call to the TeleNav™ operator

where you will speak the desired address. This is

similar to calling 411 for directory assistance.

(A fee may be incurred.)

3. If typing in the address, enter the following:

Ⅲ Address: used to enter a street address.

Section 3D. GPS Navigation

187

Ⅲ City: to enter the city for the address.

Navigation Screen

● As you enter text, a list of possible city

matches appears onscreen. If your target city

appears, use your navigation key to highlight it

Magnification

and press

Ⅲ State, ZIP or Country: used to to further restrict your

search.

Your Current Location

4. Select Done to enter the new address and receive

driving directions from the GPS network.

Estimated Time

of Arrival

5. Follow both the onscreen and audio directions.

Once you have entered your desired location and your

device has begun providing you with driving directions,

you can alter the information being displayed by using

one of three other driving options: Traffic, Summary, and

Search.

Other Driving Options

Turn by Turn

Directions

To review real-time traffic information along your route:

1. Press Start > All Programs > Sprint Navigation >

Drive To > Address.

2. Enter the physical address information. See “Using

a Known Address” on page 187.

3. Press Options (right softkey) > Traffic Summary and

press

. This action displays an onscreen current

traffic conditions along your current route.

188

Section 3D. GPS Navigation

4. Press Options (right softkey) > Moving Map and

To search for locations along the way:

press

to return to your previous driving screen.

1. Press Start > All Programs > Sprint Navigation >

Drive To > Address.

To change the area shown in the onscreen image,

Note

2. Enter the physical address information. See “Using

a Known Address” on page 187.

you can press either

(to zoom in) or

(to zoom out).

3. Press Options (right softkey) > Find Along >

To receive turn-by-turn directions (2D):

You can then search for a location along your

current route based on a name, location, or

categories such as food, gas stations, and hotels.

1. Press Start > All Programs > Sprint Navigation >

Drive To> Address.

2. Enter the physical address information. See “Using

Ⅲ See “Using a Local Business Category” on

page 190.

a Known Address” on page 187.

3. Press Options (right softkey) > Route Summary >

This screen will display turn-by-turn directions to

your selected destination.

Section 3D. GPS Navigation

189

3. Select the Near drop-down box and then select a

starting location (Current Location or Somewhere

Else).

Using a Local Business Category

Your device can also cross-reference your current

location with local business and points of interest, such

as grocery stores, gas stations, Wi-Fi hot spots, and

hospitals.

Ⅲ If you choose Somewhere Else, you will be

prompted to enter the new starting location from

the Search Near screen.

1. Press Start > All Programs > Sprint Navigation >

Drive To > Business.

Ⅲ By default, the Search Results page lists the Best

Price at the top of the list.

2. Select a category and then use your navigation

4. Highlight a returned search item and press

to then be

provided with a new route to the selected location.

key to select a subcategory.

5. Highlight Drive To and press

Ⅲ This option lets you search by using a category

type such as: Food/Coffee, Gas Stations, Gas by Price,

Banks/ATMs. Additional search criteria include:

To organize and arrange your search results:

●

Spell Name – to manually input a business

name used for the search.

1. Select a category entry from the Search Results

page. By default, the Search Results page lists the

Best Matches based on closest location first (top).

●

Recent – to use a recent location as the search

criteria.

2. Select the Near drop-down box and then select a

starting location (Current Location or Somewhere

Else).

Ⅲ Entries with more than one available category (a

subcategory) are indicated by a gray arrow. These

entries can be expanded and then closed.

3. Select Search.

190

Section 3D. GPS Navigation

4. Press Menu (right softkey) to apply the available

5. Highlight a gas station and press

filter options to best display the matching results:

6. Highlight Drive To and press to then be

provided with a new route to the selected gas

station.

Ⅲ Map Results: overlays your current list on a map of

your current location. The numeric onscreen

entries correspond to your current sorted list.

Ⅲ See “Using a Known Address” on page 187.

Ⅲ Sort by Rating: sorts the results by their overall

consumer satisfaction rating (indicated by stars to

the left of the entry). The best-rated location

(5 stars) is placed at the top of the list. The ratings

range from 0 to 5 stars.

Creating a My Favorites Location

Once you have begun using Sprint Navigation to find

destinations, you can then either recall those locations

and add them to your list of favorite destinations or add

new entries to any of the available location categories

(Address, Business, Airport, or Contacts).

To search for the least expensive gas in your area:

1. Press Start > All Programs > Sprint Navigation > Search >

Gas By Price.

To create a My Favorites entry from your Current Location:

2. Select a grade of gasoline: Any, Regular, Plus 89,

1. Press Start > All Programs > Sprint Navigation >

Tools & Extras > Record Location.

Premium, or Diesel.

3. Select the Near drop-down box and then select a

starting location (Current Location or Somewhere

Else).

2. Enter a label for the location and press

3. Highlight Save Favorite and press

or Go

(right softkey).

Ⅲ If you choose Somewhere Else, you are prompted

to enter the new location.

4. Select Search to begin the search.

Section 3D. GPS Navigation

191

● Use the Find search field to select a recipient

from your Contacts. (Qualifying Contacts

entries must contain a wireless phone

number.)

Sharing a Recent Location with Others

Recently queried locations can be saved to your My

Favorites list and also shared with other wireless

devices.

Only Contacts entry numbers that are associated

with a Mobile profile are allowed to receive this

address information. The target phone number must

be assigned to a Mobile profile. See “Adding a New

Contacts Entry” on page 80.

Note

1. Press Start > All Programs > Sprint Navigation >

Tools & Extras > Share Address.

2. Select a category from the Share Address page,

such as Current Location, My Favorites, Recent,

Business, Address, or Intersection.

5. Press Continue (right softkey) to store the recipients

and return to Share Address page.

3. Select an address. You are then sent to the Select

Contacts page.

6. Enter a label for the location you are sharing and

then select Continue to complete the delivery

process.

4. Select a recipient by either manually entering a

new entry or you can:

Ⅲ Select Create New Contact to manually enter the

recipient’s name and phone number, and then

press Go (right softkey).

– or –

Ⅲ Choose an existing Contacts entry from the list of

entries and press

192

Section 3D. GPS Navigation

Ⅲ Moving Map: to select the default map type

displayed for your navigation: 3D Moving Maps or

2D Moving Maps.

Configuring Your Navigation

Preferences

Ⅲ Nav Backlight: to choose a backlight setting of

Always On or Device Settings.

1. Press Start > All Programs > Sprint Navigation >

Tools & Extras > Preferences.

Ⅲ Audio Prompts: to choose whether the street

names are announced during your navigation.

2. Scroll down the list and select an entry to change

● Options include: With Street Names, No Street

Names, or No Audio.

Ⅲ More: to select additional preferences such as:

its current setting:

Ⅲ My Name: to alter the current first and last name

registered with the service.

●

Guide Tones: to change the language currently

used for announcements between either

English (US) or Spanish.

Ⅲ Route Style: to choose the method used to provide

you directions from your starting location to your

destination. The default is Fastest route.

●

Region: to alter the current region (country).

● Choose from one of the following options:

Always use fastest, Always use shortest, Always use

traffic optimized, Always prefer streets, Always prefer

highway, Always use pedestrian, or Ask me each

trip.

Call In Address: to alter the number used when

accessing spoken directions from the

TeleNav™ operator.

●

Help Card: to configure the settings for the

onscreen help message (card). Options

include: On or Off.

Ⅲ Traffic Alerts: to either enable or disable real-time

traffic alerts along your current route.

Ⅲ Distance Units: to change the units used for

distances: Miles/Feet or Kilometers/Meters.

Section 3D. GPS Navigation

193

Launching the Product Tour

1. Press Start > All Programs > Sprint Navigation > About >

Product Tour.

2. Follow the onscreen prompts.

194

Section 3D. GPS Navigation

Section 4

Safety and Warranty

Information

Section 4A

General Precautions

There are several simple guidelines to operating your phone

properly and maintaining safe, satisfactory service.

Important Safety Information

ⅷ Speak directly into the mouthpiece.

ⅷ Avoid exposing your phone and accessories to rain or liquid

spills. If your phone does get wet, immediately turn the

power off and remove the battery.

ⅷ Although your phone is quite sturdy, it is a complex piece of

equipment and can be broken. Avoid dropping, hitting,

bending, or sitting on it.

ⅷ Any changes or modifications to your phone not expressly

approved in this document could void your warranty for this

equipment and void your authority to operate this

equipment.

ࡗ

General Precautions

Maintaining Safe Use of and Access to Your Phone

Caring for the Battery

Using Your Phone With a Hearing Aid Device

Radio Frequency (RF) Energy

Owner’s Record

Phone Guide Proprietary Notice

For the best care of your phone, ensure that only

authorized personnel service your phone and accessories.

Failure to do so may be dangerous and void your warranty.

Note

This phone guide contains important operational and safety

information that will help you safely use your phone. Failure to

read and follow the information provided in this phone

guide may result in serious bodily injury, death, or

property damage.

196

Section 4A. Important Safety Information

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, RF signals from wireless

phones may affect inadequately shielded electronic

equipment.

Maintaining Safe Use of and Access

to Your Phone

RF signals may affect improperly installed or inadequately

shielded electronic operating systems and/or entertainment

systems in motor vehicles. Check with the manufacturer or their

representative to determine if these systems are adequately

shielded from external RF signals. Also check with the

manufacturer regarding any equipment that has been added to

your vehicle.

Do Not Rely on Your Phone for Emergency Calls

Mobile phones operate using radio signals, which cannot

guarantee connection in all conditions. Therefore you should

never rely solely upon any mobile phone for essential

communication (e.g., medical emergencies). Emergency calls

may not be possible on all cellular networks or when certain

network services or mobile phone features are in use. Check

with your local service provider for details.

Consult the manufacturer of any personal medical devices,

such as pacemakers and hearing aids, to determine if they are

adequately shielded from external RF signals.

Using Your Phone While Driving

Talking on your phone while driving (or operating the phone

without a hands-free device) is prohibited in some jurisdictions.

Laws vary as to specific restrictions. Remember that safety

always comes first.

Always turn off the phone in health care facilities and

request permission before using the phone near medical

equipment.

Note

Turning Off Your Phone Before Flying

Following Safety Guidelines

Turn off your phone before boarding any aircraft. To prevent

possible interference with aircraft systems, the U.S. Federal

Aviation Administration (FAA) regulations require you to have

permission from a crew member to use your phone while the

plane is on the ground. To prevent any risk of interference, FCC

regulations prohibit using your p hone while the plane is in the

air.

To operate your phone safely and efficiently, always follow any

special regulations in a given area. Turn your phone off in areas

where use is forbidden or when it may cause interference or

danger.

Using Your Phone Near Other Electronic Devices

Section 4A. Important Safety Information

197

Turning Off Your Phone in Dangerous Areas

Using Your Phone With a Hearing

Aid Device

To avoid interfering with blasting operations, turn your phone

off when in a blasting area or in other areas with signs

indicating two-way radios should be turned off. Construction

crews often use remote-control RF devices to set off explosives.

Your phone has been tested for for hearing aid device

compatibility. When some wireless phones are used with

certain hearing devices (including hearing aids and cochlear

implants), users may detect a noise which can interfere with the

effectiveness of the hearing device.

Turn your phone off when you’re in any area that has a

potentially explosive atmosphere. Although it’s rare, your phone

and accessories could generate sparks. Sparks can cause an

explosion or fire, resulting in bodily injury or even death. These

areas are often, but not always, clearly marked. They include:

Some hearing devices are more immune than others to this

interference noise, and phones also vary in the amount of

interference noise they may generate. ANSI standard C63.19

was developed to provide a standardized means of measuring

both wireless phone and hearing devices to determine usability

rating categories for both.

ⅷ Fueling areas such as gas stations.

ⅷ Below deck on boats.

ⅷ Fuel or chemical transfer or storage facilities.

ⅷ Areas where the air contains chemicals or particles such as

grain, dust, or metal powders.

ⅷ Any other area where you would normally be advised to turn

Ratings have been developed for mobile phones to assist

hearing device users find phones that may be compatible with

their hearing device. Not all phones have been rated for

compatibility with hearing devices. Phones that have been

rated have a label located on the box. Your Samsung ACE^TM

phone has an M3 rating.

off your vehicle’s engine.

Never transport or store flammable gas, flammable liquids,

Note

or explosives in the compartment of your vehicle that

contains your phone or accessories.

These ratings are not guarantees. Results will vary depending

on the user’s hearing device and individual type and degree of

hearing loss. If a hearing device is particularly vulnerable to

interference noise; even a phone with a higher rating may still

cause unacceptable noise levels in the hearing device. Trying

Restricting Children’s Access to Your Phone

Your phone is not a toy. Do not allow children to play with it as

they could hurt themselves and others, d amage the phone or

make calls that increase your invoice.

198

Section 4A. Important Safety Information

out the phone with your hearing device is the best way to

evaluate it for your personal needs.

“Turning Bluetooth On and Off” on page 126 for instructions to

disable these components.

M-Ratings: Phones rated M3 or M4 meet FCC requirements for

hearing aid compatibility and are likely to generate less

interference to hearing devices than unrated phones. (M4 is the

better/higher of the two ratings.)

Sprint further suggests you experiment with multiple phones

(even those not labeled M3/T3 or M4/T4) while in the store to

find the one that works best with your hearing aid device.

Should you experience interference or find the quality of

service unsatisfactory after purchasing your phone, promptly

return it to the store within 30 days of purchase. With the Sprint

30-day Risk-Free Guarantee, you may return the phone within

30 days of purchase for a full refund. More information about

hearing aid compatibility may be found at: www.fcc.gov,

www.fda.gov, and www.accesswireless.org.

T-Ratings: Phones rated T3 or T4 meet FCC requirements and

are likely to be more usable with a hearing device’s telecoil (“T

Switch”or “Telephone Switch”) than unrated phones. (T4 is the

better/higher of the two ratings. Note that not all hearing

devices have telecoils in them.)

Hearing aid devices may also be measured for immunity to

interference noise from wireless phones and should have

ratings similar to phones. Ask your hearing healthcare

professional for the rating of your hearing aid. Add the rating of

your hearing aid and your phone to determine probable

usability:

More information about hearing aid compatibility may be found

at: www.fcc.gov, www.fda.gov, and www.accesswireless.org.

Getting the Best Hearing Device Experience With

Your Phone

ⅷ Any combined rating equal to or greater than six offers

excellent use.

To further minimize interference:

ⅷ Set the phone’s display and keypad backlight settings to

ensure the minimum time interval:

ⅷ Any combined rating equal to five is considered normal use.

ⅷ Any combined rating equal to four is considered usable.

1. Press Start > All Programs > Settings > Power

Management > Display time out or Keypad backlight time

out.

Thus, if you pair an M3 hearing aid with an M3 phone, you will

have a combined rating of six for “excellent use.” This is

synonymous for T ratings.

2. Select the minimum time setting and press

ⅷ Phones with embedded antennas may produce more

interference.

To ensure that the Hearing Aid Compatibility rating for your

phone is maintained, secondary transmitters such as Bluetooth

and WLAN components must be disabled during a call. See

Section 4A. Important Safety Information

199

ⅷ Don’t attempt to disassemble or short-circuit the battery.

ⅷ The battery may need recharging if it has not been used for

a long period of time.

ⅷ Move the phone around to find the point with least

interference.

ⅷ It’s best to replace the battery when it no longer provides

acceptable performance. It can be recharged hundreds of

times before it needs replacing.

Caring for the Battery

ⅷ Don’t store the battery in high temperature areas for long

periods of time. It’s best to follow these storage rules:

Protecting Your Battery

Ⅲ Less than one month:

The guidelines listed below help you get the most out of your

battery’s performance.

-4° F to 140° F (-20° C to 60° C)

Ⅲ More than one month:

-4° F to 113° F (-20° C to 45° C)

ⅷ Recently there have been some public reports of wireless

phone batteries overheating, catching fire or exploding. It

appears that many, if not all, of these reports involve

counterfeit or inexpensive, aftermarket-brand batteries with

unknown or questionable manufacturing standards. Sprint is

not aware of similar problems with Sprint phones resulting

from the proper use of batteries and accessories approved

by Sprint or the manufacturer of your phone. Use only

Sprint-approved or manufacturer-approved batteries and

accessories found at Sprint Stores or through your phone’s

manufacturer, or call 1-866-343-1114 to order. They’re also

available at www.sprint.com — click Accessories. Buying the

right batteries and accessories is the best way to ensure

they’re genuine and safe.

Disposal of Lithium Ion (Li-Ion) Batteries

For safe disposal options of your Li-Ion batteries, contact your

nearest authorized service center.

Special Note: Be sure to dispose of your battery properly. In

some areas, the disposal of batteries in household or office

trash may be prohibited.

ⅷ In order to avoid damage, charge the battery only in

temperatures that range from 32° F to 113° F (0° C to 45° C).

ⅷ Don’t use the battery charger in direct sunlight or in high

humidity areas, such as the ba throom.

ⅷ Never dispose of the battery by incineration.

ⅷ Keep the metal contacts on top of the battery clean.

200

Section 4A. Important Safety Information

Body-Worn Operation

Radio Frequency (RF) Energy

To maintain compliance with FCC RF exposure guidelines, if

you wear a handset on your body, use an approved carrying

case, holster or other body-worn accessory. Use of non-

approved accessories may violate FCC RF exposure

guidelines.

Understanding How Your Phone Operates

Your phone is basically a radio transmitter and receiver. When

it’s turned on, it receives and transmits radio frequency (RF)

signals. When you use your phone, the system handling your

call controls the power level. This power can range from 0.006

watts to 0.2 watts in digital mode.

For more information about RF exposure, visit the FCC Web

site at www.fcc.gov.

Specific Absorption Rates (SAR) for Wireless

Phones

The SAR is a value that corresponds to the relative amount of

RF energy absorbed in the head of a user of a wireless

handset.

Knowing Radio Frequency Safety

The design of your phone complies with updated NCRP

standards described below.

In 1991-92, the Institute of Electrical and Electronics Engineers

(IEEE) and the American National Standards Institute (ANSI)

joined in updating ANSI’s 1982 standard for safety levels with

respect to human exposure to RF signals. More than 120

scientists, engineers and physicians from universities,

government health agencies and industries developed this

updated standard after reviewing the available body of

research. In 1993, the Federal Communications Commission

(FCC) adopted this updated standard in a regulation. In August

1996, the FCC adopted hybrid standard consisting of the

existing ANSI/IEEE standard and the guidelines published by

the National Council of Radiation Protection and

The SAR value of a phone is the result of an extensive testing,

measuring, and calculation process. It does not represent how

much RF the phone emits. All phone models are tested at their

highest value in strict laboratory settings. But when in

operation, the SAR of a phone can be substantially less than

the level reported to the FCC. This is because of a variety of

factors including its proximity to a base station antenna, phone

design and other factors. What is important to remember is that

each phone meets strict federal guidelines. Variations in SARs

do not represent a variation in safety.

Measurements (NCRP).

All phones must meet the federal standard, which incorporates

a substantial margin of safety. As stated above, variations in

Section 4A. Important Safety Information

201

SAR values between different model phones do not mean

variations in safety. SAR values at or below the federal standard

of 1.6 W/kg are considered safe for use by the public.

Phone Guide Proprietary Notice

The highest reported SAR values of the Samsung ACE^TMare:

CDMA Technology is licensed by QUALCOMM Incorporated

under one or more of the following patents:

ⅷ Cellular CDMA mode (Part 22):

Head: 1.00 W/kg; Body-worn: 1.28 W/kg

ⅷ PCS mode (Part 24):

Head: 1.36 W/kg; Body-worn: 0.862 W/kg

4,901,307

5,506,865

5,267,261

5,600,754

5,710,784

5,490,165

5,109,390

5,544,196

5,414,796

5,778,338

5,056,109

5,511,073

5,267,262

5,657,420

5,504,773

5,228,054

5,568,483

5,416,797

5,101,501

5,535,239

5,337,338

5,659,569

FCC Radio Frequency Emission

This phone meets the FCC Radio Frequency Emission

Guidelines.

FCC ID number: A3LSPHI325

T9 Text Input is licensed by Tegic Communications and is

covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.

6,011,554 and other patents pending.

More information on the phone's SAR can be found from the

following FCC Web site: http://www.fcc.gov/oet/fccid.

Phone Guide template version Version 7B (10/07).

Owner’s Record

The model number, regulatory number and serial number are

located on a nameplate inside the battery compartment.

Record the serial number in the space provided below. This will

be helpful if you need to contact us about your phone in the

future.

Model: Samsung ACE^TM

Serial No.:

202

Section 4A. Important Safety Information

Section 4B

Manufacturer’s Warranty

STANDARD LIMITED WARRANTY

What is Covered and For How Long?

Manufacturer’s Warranty

SAMSUNG TELECOMMUNICATIONS AMERICA, LLC

(“SAMSUNG”) warrants to the original purchaser (“Purchaser”)

that SAMSUNG’s Phones and accessories (“Products”) are free

from defects in material and workmanship under normal use

and service for the period commencing upon the date of

purchase and continuing for the following specified period of

time after that date:

ࡗ

Manufacturer’s Warranty

Your phone has been designed to provide you with reliable,

worry-free service. If for any reason you have a problem

with your equipment, please refer to the manufacturer’s

warranty in this section.

Phone

1 Year

For information regarding the terms and conditions of

service for your phone, please visit www.sprint.com or

call Sprint Customer Service at 1-888-211-4727.

Batteries

Leather Case/Pouch/Holster 90 Days

Game Pad

90 Days

1 Year

Other Phone Accessories

What is Not Covered?

This Limited Warranty is conditioned upon proper use of

Product by Purchaser. This Limited Warranty does not cover: (a)

defects or damage resulting from accident, misuse, abuse,

neglect, unusual physical, electrical or elec tromechanical

stress, or modification of any part of Product, including antenna,

or cosmetic damage; (b) equipment that has the serial number

Section 4B. Manufacturer’s Warranty

203

removed or made illegible; (c) any plastic surfaces or other

externally exposed parts that are scratched or damaged due to

normal use; (d) malfunctions resulting from the use of Product

in conjunction with accessories, products, or ancillary/

peripheral equipment not furnished or approved by

SAMSUNG; (e) defects or damage from improper testing,

operation, maintenance, installation, or adjustment; (f)

installation, maintenance, and service of Product, or (g) Product

used or purchased outside the United States or Canada. This

Limited Warranty covers batteries only if battery capacity falls

below 80% of rated capacity or the battery leaks, and this

Limited Warranty does not cover any battery if (i) the battery

has been charged by a battery charger not specified or

approved by SAMSUNG for charging the battery, (ii) any of the

seals on the battery are broken or show evidence of tampering,

or (iii) the battery has been used in equipment other than the

SAMSUNG phone for which it is specified.

Upon receipt, SAMSUNG will promptly repair or replace the

defective Product. SAMSUNG may, at SAMSUNG's sole option,

use rebuilt, reconditioned, or new parts or components when

repairing any Product or replace Product with a rebuilt,

reconditioned or new Product. Repaired/replaced leather

cases, pouches and holsters will be warranted for a period of

ninety (90) days. All other repaired/replaced Product will be

warranted for a period equal to the remainder of the original

Limited Warranty on the original Product or for 90 days,

whichever is longer. All replaced parts, components, boards

and equipment shall become the property of SAMSUNG. If

SAMSUNG determines that any Product is not covered by this

Limited Warranty, Purchaser must pay all parts, shipping, and

labor charges for the repair or return of such Product.

What Are the Limits on SAMSUNG’s Liability?

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY

CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT

"AS IS," AND SAMSUNG MAKES NO WARRANTY OR

REPRESENTATION AND THERE ARE NO CONDITIONS,

EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY

KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,

INCLUDING BUT NOT LIMITED TO:

What are SAMSUNG’s Obligations?

During the applicable warranty period, SAMSUNG will repair or

replace, at SAMSUNG's sole option, without charge to

Purchaser, any defective component part of Product. To obtain

service under this Limited Warranty, Purchaser must return

Product to an authorized phone service facility in an adequate

container for shipping, accompanied by Purchaser's sales

receipt or comparable substitute proof of sale showing the date

of purchase, the serial number of Product and the sellers'

name and address. To obtain assistance on where to deliver

the Product, call Samsung Customer Care at 1-888-987-4357.

“THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS

FOR ANY PARTICULAR PURPOSE OR USE;

“WARRANTIES OF TITLE OR NON-INFRINGEMENT;

“DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE

PRODUCT;

204

Section 4B. Manufacturer’s Warranty

“THE WORKMANSHIP OF THE PRODUCT OR THE

COMPONENTS CONTAINED THEREIN; OR

BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT

AGAINST PURCHASER BY ANY OTHER PARTY. SOME

STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,

SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY

TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH

VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS

LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE

OTHER THAN THE ORIGINAL PURCHASER OF THIS

PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY.

IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD

ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW,

SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL

NOT AFFECT THE ENFORCEABILITY FOR THE REMAINDER

OF THIS LIMITED WARRANTY WHICH PURCHASER

ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO

BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW

PERMITS. THE PARTIES UNDERSTAND THAT THE

PURCHASER MAY USE THIRD-PARTY SOFTWARE OR

EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.

SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS

AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,

STATUTORY OR OTHERWISE, AS TO THE QUALITY,

CAPABILITIES, OPERATIONS, PERFORMANCE OR

SUITABILITY OF ANY THIRDPARTY SOFTWARE OR

EQUIPMENT, WHETHER SUCH THIR D-PARTY SOFTWARE OR

EQUIPMENT IS INCLUDED WITH THE PRODUCT

DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING

“COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS

OF ANY LAW, RULE, SPECIFICATION OR CONTRACT

PERTAINING THERETO.

NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL

BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF

ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT.

ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY

ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY

LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS

WRITTEN WARRANTY STATED HEREIN. SOME STATES/

PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG

AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION

MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL

NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND

RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR

INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR

INDIRECTLY FROM THE USE OR LOSS OF USE OF THE

PRODUCT OR FROM THE BREACH OF THE EXPRESS

WARRANTY, INCLUDING INCIDENTAL, SPECIAL,

CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF

ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES

ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR

GROSS NEGLIGENCE) OR FAULT COMMITTED BY

SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY

Section 4B. Manufacturer’s Warranty

205

THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR

EQUIPMENT WITH THE PRODUCT. THE QUALITY,

settings to default settings. Please contact the Samsung

Customer Care Center for details.

CAPABILITIES, OPERATIONS, PERFORMANCE AND

SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR

EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE

DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-

PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.

Please provide warranty information (proof of

purchase) to Samsung’s Customer Care Center

in order to provide this service at no charge. If

the warranty has expired on the device, charges

may apply.

Important

This Limited Warranty allocates risk of Product failure between

Purchaser and SAMSUNG, and SAMSUNG's Product pricing

reflects this allocation of risk and the limitations of liability

contained in this Limited Warranty. The agents, employees,

distributors, and dealers of SAMSUNG are not authorized to

make modifications to this Limited Warranty, or make additional

warranties binding on SAMSUNG. Accordingly, additional

statements such as dealer advertising or presentation, whether

oral or written, do not constitute warranties by SAMSUNG and

should not be relied upon.

Customer Care Center:

1000 Klein Rd.

Plano, TX 75074

Toll Free Tel: 1-888-987-HELP (4357)

Samsung Telecommunications America, LLC.

1301 E. Lookout Drive

Precautions for Transfer and Disposal

Richardson, Texas 75082

If data stored on this device is deleted or reformatted using the

standard methods, the data only appears to be removed on a

superficial level, and it may be possible for someone to retrieve

and reuse the data by means of special software.

Phone: 1-888-987-HELP (4357)

reserved.

To avoid unintended information leaks and other problems of

this sort, it is recommended that the device be returned to

Samsung’s Customer Care Center for an Extended File System

(EFS) Clear which will eliminate all user memory and return all

No reproduction in whole or in part allowed without prior

written approval. Specifications and availability subject to

change without notice. [011604]

206

Section 4B. Manufacturer’s Warranty

My Information Settings 130

OBEX FTP 135

Pairing 131

Personal Area Network 132

Printer 132

Printing Pictures 134

Settings Menu 127

Sharing Contacts 134

Index

Back-Clear Key 59

Backlight Time-Out 49

Battery 25–27

Conserving 27

Receiving a Contact 99

Task 98

Beaming

Numerics

3-Way Calling 166

Activation 5

ActiveSync

Configuration 146

Options 147

Calculator 101

Calendar 88–92

Call

Windows Media Player 149

Add Recipients 161

Alarm Clock 92

All Programs 28, 47

Answering Calls 31

Application Hot Keys 60

Call History 75–79

Bluetooth 126–136

Deactivating Devices 132

Deleting a Device 133

Device Address 130

Device Name 130

File Transfer 134

Hands-Free 135

Filtering 77

Making a Call 78

Options 76

Resetting Timers 77

Saving a Phone Number 78

Timers 76

Using 32

Index

207

Call Options 52–54

Any Key 52

Communi cation

Data Cable 146

Data Call 71

Auto Answer Mode 5 3

International Code 53

Voicemail Number 53

Call Waiting 166

Caller ID 165, 182

Calls

Device to your Computer

Data Services 70

Date Styles 63

Wireless Bluetooth 148

Contacts 80–87

Adding a Phone Number 85

Adding an Entry 80

Assigning Speed Dial 81

Beaming 86

Default Storage

Answering 31

Ignore 31

Making 29

Camcorder 116

Camera 116

Dialing From 37

Device Settings 42–64

Dialing Options 30

Discoverability 128

Display Screen 17

Display Screen Wallpaper 47

Display Time Out 49

Driving Directions 141, 187

DRM 150

Editing a Phone Number 85

Editing an Entry 85

Entry Options 84

Erasing 86

Camcorder

Adjusting Settings 117

Camera 111–125

Adjusting General Settings

115

Adjusting Settings 116

Shooting Mode 114

Categories 83, 97

Certificates 69

Check Names 161

Finding 82

Finding Entries 82

Finding Entries by Category

Finding Speed Dial 83

Reviewing Speed Dial 82

Currency Format 63

208

Index

Fn key 61

Encryption 69

End Key 21

Function Key 60

Hard Reset 21

Home Screen

Entering Characters

GPS Navigation 185

Registration 185

GSM

Color Scheme 47

Configuring 45

Layout 46

Letters 39

Numbers 40

Recent Programs 46

Start Menu Style 48

Time Out 48

Preset Messages 41

Symbols 40

Entering Text 38–41

Calling Internationally from

another country 177

Calling the United States

from another country 176

Services Options 180

GSM Features

Call Waiting 182

Caller ID 182

GSM Mode 174

Entering 174, 175

Making and Answering Calls

175

Wallpaper 47

Event

Adding 88

Alert Menu 90

International Calling (see

Sprint Worldwide Service)

172

Internet Explorer 137

Browser Display Options 138

Copying Text 139

Deleting an Event 91

Deleting Recurring Events 91

Reviewing 90

Reviewing All Events 91

Reviewing Today’s Events 91

Pasting Text 139

Feeds, searching for 142

File Viewer 103

Zooming 139

Supported Formats 103

Index

209

My Favorites

Creating from Current

Location 191

My Text 41

Key Functions 14

Keypad Backlight Time-Out 50

Keypad Tones 43

Making Calls 29

Menu ii

Menu Items

Selecting 28

Messaging

Navigation

2D Map 189

Language 63

Live Search 140

Directions 141

Map 141

Movies 141

Traffic 141

Location Settings 51

Lock Code

Changing 66

Removing 67

Lock Mode

Calling Special Numbers 68

Locking

Manually 67

Manually Unlocking 68

Locking Your Device 65

Account Settings 57

Deleting Old Messages 57

3D Map 188

Drive T o 1 86

Finding the Cheapest Gas

191

Intersection 186

Map Results 190

Summary 189

microSD

Creating Folders 107

Displaying Folders 107

Traffic Conditions 188

Navigation Preferences 193

Network

Settings 106

Viewing Memory Space 107

Mobile Applications 137–143

Modem 143

Selecting 183

My Certificates 69

210

Index

Note

Composing 94

Regional Settings 63

Side Back-Clear Key 59

Time and Date 62

Preferred Networks 184

Product Tour 194

Profiles 44

Deleting 94

Reading 94

Phone Number

Sending via email 95

Sending via text messaging

(SMS) 94

Displaying 29

Finding 36

Phone Settings

R2VS 44

Recent Location

Sharing 192

Sorting 94

Display Settings 45–48

Location Settings 51

Messaging Set tings 54–57

Power Management 49–51

Sound Settings 42–45

Pictures and Videos by Email

123–124

Plus (+) Code Dialing 36

Power Manag ement

Backlight 49

Recent Programs 28, 46

Resetting Your Phone 70

Reviewing Pictures 119

Reviewing Videos 119

Ringer Types 42

Roaming 72–74

Setting Roam Mode 73

RSS Reader 141

Notepad 93

Options

My Pictures Folder 120

Pictures & Video Files 121

Passcode 131

Phone (Illus.) 12

Phone As Modem 143

Phone Customization

Assigning Application to

Speed Dial 61

Security 65–71

Security Menu 65

Self-Timer 113

Battery Level 49

Brightness 50

Display 49

Keypad Backlight 50

Shooting Mode 114

Fn Key 60

Message Key 60

Index

211

SIM Card

Removing 173

SIM PhoneBook

Add Entry 179

Copy Entry 180

Smart Converter 101

SMS 94, 161

Threaded Conversation 163

SMS Text Messaging 160–165

Threaded Messaging 163

Softkeys

Using 20

Sound

Voice Calls 43

Special Numbers 68

Adding 68

Speed Dialing 37

Assigning Numbers 81

Sprint Customer Service 9

Sprint Navigation

Making and Answering Calls

175

Network 183

Preferred Networks 184

Retrieving Voicemail

Sprint Service

Dialing Sprint Services 87

Setting Up 2

Grid 48

List 48

Adding Custom Sounds 43

Call Alert Notifications 44

Customizing Profiles 45

Keypad Tone 43

Message Notifications 43

Profiles 44

R2VS Headphone 44

Resetting a Profile to Factory

Default 45

Sprint 411 9

Stopwatch 102

Synchronization 144–151

Overview 145

Sprint Store 168

Sprint TV 168–171

Spri nt Worldwide Service

Activating Service 172

Calling Emergency Numbers

175

Contacting Sprint 181

System Sounds 43

212

Index

Group Distribution List 157

Key Guide 156

Menu Key 159

Options 157

Replying to 158

Retrieving 155

Taking Pictures 111–117

Tasks 95

Unlocking the Device 68

Unlocking Your Device 66

Update Profile 71

Beaming via Bluetooth 98

Completing 96

Deleting 98

Editing 98

Filtering the List 97

Videos

Window s Media Player

Options 100

Playing 100

Recording 99

Sync List 150

Sorting and Filtering 97

Sorting the Task List 97

Threaded Text Messaging 163

Three-Way Calling 166

Time Formats 63

Timer 113

Sync Options 149

Synching Music 150

World Clock 102

Renaming 100

Voicemail

Zooming 139

Accessing from Another

Number 156

Callback 157

Tip Calculator 100

Tools 88–103

TTY Use 58

Turning Your Device Off 25

Turning Your Device On 24

Expert Mode 157

Extended Absence Greeting

159

Forwarding Voicemail 158

Index

213

Vestax CDX 15 User Manual
Technicolor Thomson RCA RP2380 User Manual
Sony ICF C153L User Manual
Sony CDP NW10 User Manual
RCA RPC100 User Manual
Philips HD7544 User Manual
Philips CD 605 User Manual
Panasonic SL CT680V User Manual
Nokia IPSO IP350 User Manual
Nokia ESERIES E66 User Manual