Samsung Galaxy S III S3 GT I9300GRAY User Manual

GT-I8190  
User Manual  
About this manual  
Default applications that come with the device are subject to updates and may no longer  
be supported without prior notice. If you have questions about an application provided  
with the device, contact a Samsung Service Centre. For user-installed applications,  
contact service providers.  
Modifying the device’s operating system or installing softwares from unofficial sources  
may result in device malfunctions and data corruption or loss. These actions are violations  
of your Samsung licence agreement and will void your warranty.  
Instructional icons  
Warning: situations that could cause injury to yourself or others  
Caution: situations that could cause damage to your device or other equipment  
Note: notes, usage tips, or additional information  
Copyright  
Copyright © 2012 Samsung Electronics  
This guide is protected under international copyright laws.  
No part of this guide may be reproduced, distributed, translated, or transmitted in any form or  
by any means, electronic or mechanical, including photocopying, recording, or storing in any  
information storage and retrieval system, without the prior written permission of Samsung  
Electronics.  
3
About this manual  
Trademarks  
SAMSUNG and the SAMSUNG logo are registered trademarks of Samsung Electronics.  
The Android logo, Google , Google Maps , Google Mail , YouTube , Google Play  
Store, and Google Talk are trademarks of Google, Inc.  
Bluetooth is a registered trademark of Bluetooth SIG, Inc. worldwide.  
®
Wi-Fi , Wi-Fi Protected Setup , Wi-Fi Direct , Wi-Fi CERTIFIED , and the Wi-Fi logo are  
registered trademarks of the Wi-Fi Alliance.  
®
All other trademarks and copyrights are the property of their respective owners.  
4
Getting started  
Device layout  
Front camera  
Earpiece  
Proximity sensor  
Home button  
Power button  
Touch screen  
Menu button  
Microphone  
Back button  
Multipurpose jack  
Headset jack  
Speaker  
GPS antenna  
Flash  
Rear camera  
Back cover  
Volume button  
Main antenna  
8
 
Getting started  
Do not cover the antenna area with your hands or other objects. This may cause  
connectivity problems or drain the battery.  
Do not use a screen protector. This causes sensor malfunctions.  
Do not allow water to contact the touch screen. The touch screen may malfunction  
in humid conditions or when exposed to water.  
Buttons  
Button  
Function  
Press and hold to turn the device on or off.  
Press and hold for 8-10 seconds to reset the device if it has  
fatal errors or hang-ups, or freezes.  
Power  
Press to lock or unlock the device. The device goes into lock  
mode when the touch screen turns off.  
Tap to open a list of options available for the current screen.  
Tap and hold on the Home screen to launch Google search.  
Press to return to the Home screen.  
Menu  
Home  
Back  
Press and hold to open the list of recent applications.  
Tap to return to the previous screen.  
Volume  
Press to adjust the device volume.  
9
 
Getting started  
Package contents  
Check the product box for the following items:  
Device  
Battery  
Quick start guide  
Use only Samsung-approved software. Pirated or illegal software may cause damage  
or malfunctions, which are not covered by the warranty.  
The items supplied with the device and any available accessories may vary  
depending on the region or service provider.  
The supplied items are designed only for this device and may not be compatible  
with other devices.  
Appearances and specifications are subject to change without prior notice.  
You can purchase additional accessories from your local Samsung retailer. Make  
sure they are compatible with the device before purchase.  
Other accessories may not be compatible with your device.  
Use only Samsung-approved accessories. Malfunctions caused by using  
unapproved accessories are not covered by the warranty service.  
Availability of all accessories is subject to change depending entirely on  
manufacturing companies. For more information about available accessories, refer  
to the Samsung website.  
10  
 
Getting started  
Installing the SIM or USIM card and battery  
Insert the SIM or USIM card provided by the mobile telephone service provider, and the  
included battery.  
Remove the back cover.  
1
Be careful not to damage your fingernails when you remove the back cover.  
Do not bend or twist the back cover excessively. Doing so may damage the cover.  
Insert the SIM or USIM card with the gold-coloured contacts facing downwards.  
2
11  
 
Getting started  
Do not remove the protective tape covering the antenna, as this can damage the  
antenna.  
Do not insert a memory card into the SIM card slot. If a memory card happens to  
be lodged in the SIM card slot, take the device to a Samsung Service Centre to  
remove the memory card.  
The SIM card slot of your device is only suited for standard SIM cards. Inserting a  
microSIM card or a microSIM card with an unauthorised holder may cause damage  
to the SIM card slot of your device.  
Use caution not to lose or let others use the SIM or USIM card. Samsung is not  
responsible for any damages or inconveniences caused by lost or stolen cards.  
Insert the battery.  
3
4
2
1
Replace the back cover.  
12  
Getting started  
Removing the SIM or USIM card and battery  
Remove the back cover.  
1
Pull out the battery.  
2
Pull out the SIM or USIM card.  
3
13  
Getting started  
Charging the battery  
Charge the battery before using it for the first time. Use the charger to charge the battery. A  
computer can be also used to charge the device by connecting them via the USB cable.  
Use only Samsung-approved chargers, batteries, and cables. Unapproved chargers or  
cables can cause the battery to explode or damage the device.  
When the battery power is low, the device emits a warning tone and displays a low  
battery power message.  
If the battery is completely discharged, the device cannot be turned on  
immediately when the charger is connected. Allow a depleted battery to charge for  
a few minutes before turning on the device.  
Charging with the charger  
Plug the small end of the charger into the multipurpose jack of the device, and plug the large  
end of the charger into an electric socket.  
Connecting the charger improperly may cause serious damage to the device. Any  
damage caused by misuse is not covered by the warranty.  
14  
 
Getting started  
The device can be used while it is charging, but it may take longer to fully charge  
the battery.  
If the device receives an unstable power supply while charging, the touch screen  
may not function. If this happens, unplug the charger from the device.  
While charging, the device may heat up. This is normal and should not affect the  
device’s lifespan or performance. If the battery gets hotter than usual, the charger  
may stop charging.  
If the device is not charging properly, take the device and the charger to a  
Samsung Service Centre.  
After fully charging, disconnect the device from the charger. First unplug the charger from the  
device, and then unplug it from the electric socket.  
Do not remove the battery before removing the charger. This may damage the  
device.  
To save energy, unplug the charger when not in use. The charger does not have a  
power switch, so you must unplug the charger from the electric socket when not in  
use to avoid wasting power. The device should remain close to the electric socket  
while charging.  
Checking the battery charge status  
When you charge the battery while the device is off, the following icons will show the current  
battery charge status:  
Charging  
Fully charged  
15  
Getting started  
Reducing the battery consumption  
Your device provides options that help you save battery power. By customising these options  
and deactivating features in the background, you can use the device longer between charges:  
When you are not using the device, switch to sleep mode by pressing the Power button.  
Close unnecessary applications with the task manager.  
Deactivate the Bluetooth feature.  
Deactivate the Wi-Fi feature.  
Deactivate auto-syncing of applications.  
Decrease the backlight time.  
Decrease the brightness of the display.  
Inserting a memory card  
Your device accepts memory cards with maximum capacities of 32 GB. Depending on the  
memory card manufacturer and type, some memory cards may not be compatible with your  
device.  
Some memory cards may not be fully compatible with the device. Using an  
incompatible card may damage the device or the memory card, or corrupt the data  
stored in it.  
Use caution to insert the memory card right-side up.  
The device supports only the FAT file system for memory cards. When inserting a  
card formatted in a different file system, the device asks to reformat the memory  
card.  
Frequent writing and erasing of data shortens the lifespan of memory cards.  
When inserting a memory card into the device, the memory card’s file directory  
appears in the extSdCard folder under the internal memory.  
16  
 
Getting started  
Remove the back cover and battery.  
1
2
Insert a memory card with the gold-coloured contacts facing downwards, and then push  
the memory card down.  
1
2
Push the memory card down into the slot and then slide it backwards until it locks into  
place.  
3
4
Replace the battery and back cover.  
17  
Getting started  
Removing the memory card  
Before removing the memory card, first unmount it for safe removal. On the Home screen, tap  
Apps Settings Storage Unmount SD card  
.
Remove the back cover and battery.  
1
Push the memory card into the slot until it disengages from the device, and then pull it  
out.  
2
Replace the battery and back cover.  
3
Do not remove the memory card while the device is transferring or accessing  
information. Doing so can cause data to be lost or corrupted or damage to the  
memory card or device. Samsung is not responsible for losses that result from the  
misuse of damaged memory cards, including the loss of data.  
Formatting the memory card  
A memory card formatted on a computer may not be compatible with the device. Format the  
memory card on the device.  
On the Home screen, tap Apps Settings Storage Format SD card Format SD  
card Erase everything  
.
Before formatting the memory card, remember to make backup copies of all  
important data stored on the device. The manufacturer’s warranty does not cover loss  
of data resulting from user actions.  
18  
Getting started  
Turning the device on and off  
When turning on the device for the first time, follow the on-screen instructions to set up your  
device.  
Press and hold the Power button for a few seconds to turn on the device.  
Follow all posted warnings and directions from authorised personnel in areas  
where the use of wireless devices is restricted, such as aeroplanes and hospitals.  
Press and hold the Power button and tap Flight mode to disable the wireless  
features.  
To turn off the device, press and hold the Power button, and then tap Power off  
.
Holding the device  
Do not cover the antenna area with your hands or other objects. This may cause connectivity  
problems or drain the battery.  
19  
 
Getting started  
Locking and unlocking the device  
When not in use, lock the device to prevent unwanted operation. Pressing the Power button  
turns off the screen and puts the device into lock mode. The device automatically gets locked  
if it is not used for a specified period.  
To unlock the device, press the Power button or the Home button when the touch screen is  
turned off, tap anywhere on the screen, and then flick your finger in any direction.  
You can use motion to unlock the device. On the Home screen, tap Apps Settings Lock  
screen Screen lock Motion. To unlock the device with motion, tap and hold a point on  
the screen, and then tilt the device forwards.  
Adjusting the volume  
Press the Volume button up or down to adjust the ringtone volume, or to adjust the sound  
volume when playing music or video.  
20  
 
Getting started  
Switching to silent mode  
Use one of the following methods:  
Press and hold the Volume button down until it switches to silent mode.  
Press and hold the Power button, and then tap Mute  
Open the notifications panel at the top of the screen, and then tap Sound  
.
.
Set the device to alert you to various events in silent mode. Press and hold the Power button,  
and then tap Vibrate  
.
21  
 
Basics  
Indicator icons  
The icons displayed at the top of the screen provide information about the status of the  
device. The icons listed in the table below are most common.  
Icon  
Meaning  
No signal  
Signal strength  
Roaming (outside of normal service area)  
GPRS network connected  
EDGE network connected  
UMTS network connected  
HSDPA network connected  
Wi-Fi connected  
Bluetooth feature activated  
GPS activated  
Call in progress  
Missed call  
Synced with the web  
Connected to computer  
No SIM or USIM card  
New text or multimedia message  
Alarm activated  
Silent mode activated  
Vibration mode activated  
Flight mode activated  
Error occurred or caution required  
Battery power level  
22  
 
Basics  
Using the touch screen  
Use only fingers to use the touch screen.  
Do not allow the touch screen to come into contact with other electrical devices.  
Electrostatic discharges can cause the touch screen to malfunction.  
Do not allow the touch screen to contact water. The touch screen may malfunction  
in humid conditions or when exposed to water.  
To avoid damaging the touch screen, do not tap it with anything sharp or do not  
apply excessive pressure to it with your fingertips.  
Leaving the touch screen idle for extended periods may result in afterimages  
(screen burn-in) or ghosting. Turn off the touch screen when you do not use the  
device.  
Finger gestures  
Tapping  
To open an application, to select a menu item, to press an on-screen button, or to enter a  
character using the on-screen keyboard, tap it with a finger.  
23  
 
Basics  
Dragging  
To move an icon, thumbnail, or preview to a new location, tap and hold it and drag it to the  
target position.  
Double-tapping  
Double-tap on a webpage, map, or image to zoom in a part. Double-tap again to return.  
24  
Basics  
Flicking  
Flick left or right on the Home screen or the Applications screen to see another panel. Flick up  
or down to scroll through a webpage or a list, such as contacts.  
Pinching  
Spread two fingers apart on a webpage, map, or image to zoom in a part. Pinch to zoom out.  
25  
Basics  
Control motions  
Simple motions allow easy control of the device.  
Before using motions, make sure the motion feature is activated. On the Home screen, tap  
Apps Settings Motion, and then drag the Motion switch to the right.  
Rotating the screen  
Many applications allow display in either portrait or landscape orientation. Rotating the  
device causes the display to automatically adjust to fit the new screen orientation.  
To prevent the display from rotating automatically, open the notifications panel and deselect  
Screen rotation  
.
Some applications do not allow screen rotation.  
Some applications display a different screen depending on the orientation. The  
calculator turns into a scientific calculator when rotated to landscape.  
26  
 
Basics  
Picking up  
When you pick up the device after it has been idle for some time or when the screen has  
turned off, it vibrates if you have missed calls or new messages.  
Holding to ear  
While viewing call, message, or contact details, pick up and hold the device to your ear to  
make a call.  
27  
Basics  
Panning to move  
Tap and hold an item, and then move the device to the left or right to move the item to  
another panel on the Home screen or the Applications screen.  
Panning to browse  
When an image is zoomed in, tap and hold a point on the screen, and then move the device  
in any direction to browse the image.  
28  
Basics  
Double-tapping  
Double-tap the device to move to the top of a list of contacts or emails.  
Rotating  
While the screen is locked, tap and hold the screen, and then rotate the device to landscape  
orientation to launch the camera. To use this motion, on the Home screen, tap Apps  
Settings Lock screen Lock screen options, and then drag the Camera quick access  
switch to the right.  
29  
Basics  
Turning over  
Turn over the device to mute ringtone, pause media playback, or mute the FM radio.  
Shaking  
Shake the device to search for Bluetooth devices.  
Shake the device to update the list of emails or information from Yahoo News, Yahoo  
Finance, or AccuWeather.  
30  
Basics  
Tilting  
Tap and hold two points on the screen, and then tilt the device back and forth to zoom in or  
out.  
Notifications  
Notification icons appear on the status bar at the top of the screen to report missed calls, new  
messages, calendar events, device status, and more. Drag down from the status bar to open  
the notifications panel. Scroll the list to see additional alerts. To close the notifications panel,  
drag up the bar that is at the bottom of the screen.  
From the notifications panel, you can view your device’s current status and use the following  
options:  
Wi-Fi: Activate or deactivate the Wi-Fi feature.  
GPS: Activate or deactivate the GPS feature.  
Sound: Activate or deactivate silent mode. You can vibrate or mute your device in silent  
mode.  
Screen rotation: Allow or prevent the interface from rotating when you rotate the device.  
Bluetooth: Activate or deactivate the Bluetooth feature.  
Mobile data: Activate or deactivate the data connection.  
31  
 
Basics  
Blocking mode: Activate or deactivate blocking mode. In blocking mode, the device will  
block notifications. To select which notifications will be blocked, tap Settings Blocking  
mode  
.
Power saving: Activate or deactivate power-saving mode.  
Sync: Activate or deactivate auto-syncing of applications.  
The available options may vary depending on the region or service provider.  
Home screen  
The Home screen is the starting point to access all of the device’s features. It displays indicator  
icons, widgets, shortcuts to applications, and others.  
The Home screen can have multiple panels. To view other panels, scroll left or right.  
Rearranging items  
Adding an application icon  
On the Home screen, tap Apps, tap and hold an application icon, and then drag it into a panel  
preview.  
Adding an item  
Customise the Home screen by adding widgets, folders, or page.  
Tap and hold the empty area on the Home screen, and then select one of the following  
categories:  
Apps and widgets: Add widgets or applications to the Home screen.  
Folder: Create a new folder.  
Page: Create a new page.  
Then, select an item and drag it to the Home screen.  
32  
 
Basics  
Moving an item  
Tap and hold an item and drag it to a new location. To move it to another panel, drag it to the  
side of the screen.  
Removing an item  
Tap and hold an item, and drag it to the rubbish bin that appears at the top of the Home  
screen. When the rubbish bin turns red, release it.  
Rearranging panels  
Adding a new panel  
Tap  
Edit page  
.
Moving a panel  
Tap  
Edit page, tap and hold a panel preview, and then drag it to a new location.  
Removing a panel  
Tap  
Edit page, tap and hold a panel preview, and then drag it to the rubbish bin at the  
bottom of the screen.  
Setting wallpaper  
Set an image or photo stored in the device as wallpaper for the Home screen.  
On the Home screen, tap  
following:  
Set wallpaper Home screen, and then select one of the  
Gallery: See photos taken by the device’s camera or images downloaded from the  
Internet.  
Live wallpapers: See animated images.  
Wallpapers: See wallpaper images.  
Then, select an image and tap Set wallpaper. Or, select an image, resize it by dragging the  
frame, and then tap Done  
.
33  
Basics  
Using applications  
This device can run many different types of applications, ranging from media to Internet  
applications.  
Opening an application  
On the Home screen or the Applications screen, select an application icon to open it.  
Opening from recently-used applications  
Press and hold the Home button to open the list of recently-used applications.  
Select an application icon to open.  
Closing an application  
Close applications not in use to save battery power and maintain device performance.  
Press and hold the Home button, tap , and then tap End next to an application to close it.  
To close all running applications, tap End all. Alternatively, press and hold the Home button,  
and then tap  
.
Applications screen  
The Applications screen displays icons for all applications, including any new applications  
installed.  
On the Home screen, tap Apps to open the Applications screen.  
To view other panels, scroll left or right.  
34  
 
Basics  
Rearranging applications  
This feature is available only in the customisable grid view.  
Tap  
View type Customisable grid. Tap  
Edit, tap and hold an application, and  
then drag it to a new location. To move it to another panel, drag it to the side of the screen.  
Organising with folders  
Put related applications together in a folder for convenience.  
Tap  
Edit, tap and hold an application, and then drag it to Create folder. Enter a folder  
name and then tap OK. Put applications into the new folder by dragging, and then tap Save  
to save the arrangement.  
Rearranging panels  
Pinch on the screen, tap and hold a panel preview, and then drag it to a new location.  
Installing applications  
Use application stores, such as Samsung Apps, to download and install applications.  
Uninstalling applications  
Tap  
Uninstall, and then select an application to uninstall it.  
Some default applications that come with the device cannot be uninstalled.  
Sharing applications  
Share downloaded applications with other users via email, Bluetooth, or other methods.  
Tap  
Share app, select applications, tap Done, and then select a sharing method. The  
next steps vary depending on the method selected.  
35  
Basics  
Help  
Access help information to learn how to use the device and applications or configure  
important settings.  
Tap Help on the Applications screen. Select an item to view tips.  
To reset help pop-ups if you have hidden them, tap Show help tip pop-ups, and then select  
items by ticking.  
Entering text  
Use the Samsung keyboard or the voice input feature to enter text.  
Text entry is not supported in some languages. To enter text, you must change the  
input language to one of the supported languages.  
Changing the keyboard type  
Tap any text field, open the notifications panel, tap Choose input method, and then select  
the type of keyboard to use.  
Using the Samsung keyboard  
Changing the keyboard layout  
Tap  
Portrait keyboard types, and then tap Qwerty keyboard or 3x4 keyboard  
.
Set options for the Samsung  
keyboard.  
Delete a preceding character.  
Enter uppercase.  
Break to the next line.  
Enter a space.  
Enter numerals and punctuation  
marks.  
36  
 
Basics  
Entering uppercase  
Tap before entering a character. For all caps, tap it twice.  
Changing language keyboards  
Slide the space key left or right to change language keyboards.  
Handwriting  
Tap and hold , tap , and then write a word with a finger. Suggested words appear as  
characters are entered. Select a suggested word.  
Entering text by voice  
Activate the voice input feature and then speak into the microphone. The device displays  
what you speak.  
If the device does not recognise your words correctly, tap the underlined text and select an  
alternative word or phrase from the dropdown list.  
To change the language or add languages for the voice recognition, tap the current language.  
When you are finished, tap  
.
37  
Basics  
Copying and pasting  
Tap and hold over text, drag or to select more or less text, and then tap to copy or  
to cut. The selected text is copied to the clipboard.  
To paste it into a text entry field, place the cursor at the point where it should be inserted, and  
then tap  
Paste.  
Connecting to a Wi-Fi network  
Connect the device to a Wi-Fi network to use the Internet or share media files with other  
devices. (p. 98)  
Turning Wi-Fi on and off  
Open the notifications panel, and then tap Wi-Fi to turn it on or off.  
Your device uses a non-harmonised frequency and is intended for use in all  
European countries. The WLAN can be operated in the EU without restriction  
indoors, but cannot be operated outdoors.  
Turn off Wi-Fi to save the battery when not in use.  
Joining Wi-Fi networks  
On the Applications screen, tap Settings Wi-Fi, and then drag the Wi-Fi switch to the right.  
Select a network from the list of detected Wi-Fi networks, enter a password if necessary, and  
then tap Connect. Networks that require a password appear with a lock icon. After the device  
connects to a Wi-Fi network, the device will automatically connect to it any time it is available.  
38  
 
Basics  
Adding Wi-Fi networks  
If the desired network does not appear in the networks list, tap Add Wi-Fi network at the  
bottom of the networks list. Enter the network name in Network SSID, select the security  
type and enter the password if it is not an open network, and then tap Save  
.
Forgetting Wi-Fi networks  
Any network that has ever been used, including the current network, can be forgotten so the  
device will not automatically connect to it. Select the network in the networks list, and then  
tap Forget  
.
Setting up accounts  
Google applications, such as Play Store, require a Google account, and Samsung Apps  
requires a Samsung account. Create Google and Samsung accounts to have the best  
experience with the device.  
Adding accounts  
Follow the instructions that appear when opening a Google application without signing in to  
set up a Google account.  
To sign in with or sign up for a Google account, on the Applications screen, tap Settings  
Add account Google. After that, tap New to sign up, or tap Existing, and then follow on-  
screen instructions to complete the account setup. More than one Google account can be  
used on the device.  
Set up a Samsung account as well.  
39  
 
Basics  
Removing accounts  
On the Applications screen, tap Settings, select an account name under Accounts, select the  
account to remove, and then tap Remove account  
.
Transferring files  
Move audio, video, image, or other types of files from the device to the computer, or vice  
versa.  
The following file formats are supported by some applications. Some file formats are  
not supported depending on the version of the device’s software.  
Music: mp3, m4a, mp4, 3gp, 3ga, wma, ogg, oga, aac, and flac  
Image: bmp, gif, jpg, and png  
Video: 3gp, mp4, avi, wmv, flv, and mkv  
Document: doc, docx, dot, dotx, xls, xlsx, xltx, csv, ppt, pptx, pps, ppsx, pot, potx,  
pdf, hwp, txt, asc, rtf, and zip  
Connecting with Samsung Kies  
Samsung Kies is a computer application that manages media libraries, contacts, and  
calendars, and syncs them with Samsung devices. Download the latest Samsung Kies from  
the Samsung website.  
Connect the device to the computer using the USB cable.  
1
Samsung Kies launches on the computer automatically. If Samsung Kies does not launch,  
double-click the Samsung Kies icon on the computer.  
Transfer files between your device and the computer.  
2
Refer to the Samsung Kies help for more information.  
40  
 
Basics  
Connecting as a media device  
Connect the device to the computer using the USB cable.  
1
Open the notifications panel, and then tap Connected as a media device Media  
2
device (MTP)  
.
Tap Camera (PTP) if your computer does not support Media Transfer Protocol (MTP) or  
not have any appropriate driver installed.  
Transfer files between your device and the computer.  
3
Securing the device  
Prevent others from using or accessing personal data and information stored in the device by  
using the security features. The device requires an unlock code whenever unlocking it.  
Setting a face unlock  
On the Applications screen, tap Settings Lock screen Screen lock Face unlock  
.
Fit your face in the frame to be captured. Then, set a backup unlock PIN or pattern to unlock  
the screen in case the face unlock fails.  
Setting a face and voice unlock  
On the Applications screen, tap Settings Lock screen Screen lock Face and voice  
.
Fit your face in the frame to be captured and then set a voice command. Then, set a backup  
unlock PIN or pattern to unlock the screen in case the face and voice unlock fails.  
41  
 
Basics  
Setting a pattern  
On the Applications screen, tap Settings Lock screen Screen lock Pattern  
.
Draw a pattern by connecting four dots or more, and then draw the pattern again to verify it.  
Set a backup unlock PIN to unlock the screen when you forget the pattern.  
Setting a PIN  
On the Applications screen, tap Settings Lock screen Screen lock PIN  
.
Enter at least four numbers, and then enter the password again to verify it.  
Setting a password  
On the Applications screen, tap Settings Lock screen Screen lock Password  
.
Enter at least four characters including numbers and symbols, and then enter the password  
again to verify it.  
42  
Basics  
Unlocking the device  
Turn on the screen by pressing the Power button or the Home button, and enter the unlock  
code.  
If the unlock code is forgotten, take the device to a Samsung Service Centre to reset it.  
Upgrading the device  
The device can be upgraded to the latest software.  
This feature may not be available depending on the region or service provider.  
Upgrading with Samsung Kies  
Launch Samsung Kies and connect the device to the computer. Samsung Kies automatically  
recognises the device and shows available updates in a dialogue box, if any. Click the Update  
button in the dialogue box to start upgrading. Refer to the Samsung Kies help for details on  
how to upgrade.  
Do not turn off the computer or disconnect the USB cable while the device is  
upgrading.  
While upgrading the device, do not connect other media devices to the computer.  
Doing so may interfere with the update process.  
Upgrading over the air  
The device can be directly upgraded to the latest software by the firmware over-the-air  
(FOTA) service.  
On the Applications screen, tap Settings About device Software update Update  
.
43  
 
Communication  
Phone  
Use this application to make or answer a call.  
Tap Phone on the Applications screen.  
Making calls  
Making a call  
Use one of the following methods:  
Keypad: Enter the number using the keypad, and then tap .  
Logs: Make a call from the history of incoming and outgoing calls and messages.  
Favourites: Make a call from the list of favourite contacts.  
Contacts: Make a call from the contacts list.  
Speed dial numbers  
For speed dial numbers, tap and hold the corresponding digit.  
Number prediction  
When entering numbers on the keypad, automatic predictions appear. Select one of these to  
make a call.  
44  
 
Communication  
Finding contacts  
Enter a name, phone number, or email address to find a contact in the contacts list. As  
characters are entered, predicted contacts appear. Select one to place a call to it.  
Making an international call  
Tap and hold  
0
until the sign appears. Enter the country code, area code, and phone  
+
number, and then tap .  
During a call  
The following actions are available:  
: Hold a call. Or press and hold the headset button. Tap to retrieve the held call, or  
press and hold the headset button.  
Add call: Dial a second call.  
Keypad: Open the keypad.  
Speaker: Activate the speakerphone. Keep the device away from your ears when using  
the speakerphone.  
Mute: Turn off the microphone so that the other party cannot hear you.  
Headset: Switch to a Bluetooth headset if it is connected to the device.  
Swap: Switch between two calls.  
Merge: Make a multiparty call when connected to two calls. Repeat this to add more  
parties. This feature is available only if the multiparty call service is active.  
Contacts: Open the contacts list.  
Message: Send a message.  
Memo: Create a memo.  
Transfer: Connect the first party to the second party. This disconnects you from  
the conversation.  
Manage conference call: Have a private conversation with one party during a  
multiparty call or disconnect one party form the multiparty call.  
45  
Communication  
Adding contacts  
To add a phone number to the contacts list from the keypad, enter the number and tap Add  
to contacts  
.
Viewing call logs  
Tap Logs to view the history of incoming and outgoing calls.  
To filter a call log, tap  
View by, and then select an option.  
Fixed dialling number  
The device can be set to restrict outgoing calls only to numbers with specified prefixes. Those  
prefixes are stored in the SIM or USIM card.  
Tap  
Call settings Additional settings Fixed Dialling Numbers Enable FDN,  
and then enter the PIN2 supplied with the SIM or USIM card. Tap FDN list and add numbers.  
Call barring  
The device can be set to prevent certain calls from being made. For example, international  
calling can be disabled.  
Tap  
Call settings Additional settings Call barring, select a call type, select a call  
barring option, and then enter a password.  
46  
Communication  
Receiving calls  
Answering a call  
When a call comes in, drag outside the circle, or press the headset button.  
If the call waiting service is active, another call can be made. When the second call is  
answered, the first call is put on hold.  
Rejecting a call  
When a call comes in, drag outside the circle, or press and hold the headset button.  
To send a message when rejecting an incoming call, tap Reject call with message. To create  
the rejection message, tap  
Call settings Set reject messages.  
Automatically rejecting calls from unwanted numbers  
Tap  
Call settings Call rejection, drag the Auto reject mode switch to the right, and  
then tap Auto reject list. Tap Create, enter a number, assign a category, and then tap Save  
.
Missed calls  
If a call is missed,  
missed calls.  
appears on the status bar. Open the notifications panel to view the list of  
Call waiting  
Call waiting is a service provided by the service provider. A user can use this service to  
suspend a current call and switch to an incoming call. This service is not available for video  
calls.  
To make use of this service, tap  
Call settings Additional settings Call waiting.  
47  
Communication  
Call forwarding  
The device can be set to send incoming calls to a specified number.  
Tap  
Call settings Call forwarding, and then select a call type and condition. Enter a  
number and tap Enable  
.
Ending a call  
Tap End call to end a call. Or press the headset button.  
Video calls  
Making a video call  
Enter the number or select a contact from the contacts list, and then tap to make a video  
call.  
During a video call  
The following actions are available:  
Switch camera: Switch between the front and rear camera.  
Mute: Turn off the microphone so that the other party cannot hear you.  
Hide me: Hide your image from the other party.  
Outgoing image: Select an image to show it to the other party.  
Keypad: Open the keypad.  
Switch to headset: Switch to a Bluetooth headset if it is connected to the device.  
Speaker off: Deactivate the speakerphone feature.  
Animated emotions: Apply emotional icons to your image.  
Theme view: Apply decorative icons to your image.  
Enable cartoon view: Change the view mode to the cartoon view.  
48  
Communication  
Tap and hold the other party’s image to access the following options:  
Capture image: Capture the other party’s image.  
Record video: Take a video of the other party’s images.  
It is illegal in many countries to record a call without the other party’s prior  
permission.  
Tap and hold your image to access the following options:  
Switch camera: Switch between the front and rear camera.  
Outgoing image: Select an image to show it to the other party.  
Swapping images  
Drag an image of either party onto the other party’s image to swap the images.  
49  
Communication  
Contacts  
Use this application to manage contacts, including phone numbers, email addresses, and  
others.  
Tap Contacts on the Applications screen.  
Managing contacts  
Creating a contact  
Tap and enter contact information.  
: Add an image.  
: Add or delete a contact field.  
/
Editing a contact  
Select a contact to edit, and then tap  
.
Deleting a contact  
Tap  
Delete.  
Setting a speed dial number  
Tap  
Speed dial setting, select a speed dial number, and then select a contact for it. To  
remove a speed dial number, tap and hold it, and then tap Remove  
.
Searching for contacts  
Use one of the following search methods:  
Scroll up or down the contacts list.  
Use the index at the right side of the contacts list for quick scrolling, by dragging a finger  
along it.  
Tap the search field at the top of the contacts list and enter search criteria.  
50  
 
Communication  
Once a contact is selected, take one of the following actions:  
: Add to favourite contacts.  
/
: Make a voice or video call.  
: Compose a message.  
: Compose an email.  
Importing and exporting contacts  
Syncing with Google Contacts  
Tap  
Merge with Google.  
Contacts synced with Google Contacts appear with in the contacts list.  
If a contact is added or deleted on the device, it is also added to or deleted from Google  
Contacts, and vice versa.  
Syncing with Samsung Contacts  
Tap  
Merge with Samsung.  
Contacts synced with Samsung Contacts appear with in the contacts list.  
If a contact is added or deleted on the device, it is also added to or deleted from Samsung  
Contacts, and vice versa.  
Importing contacts  
Tap  
Import/Export Import from SIM card, Import from SD card, or Import from  
USB storage  
.
Exporting contacts  
Tap  
Import/Export Export to SIM card  
,
Export to SD card, or Export to USB  
storage  
.
51  
Communication  
Sharing contacts  
Tap  
Import/Export Share namecard via, select contacts, tap Done, and then select  
a sharing method.  
Favourite contacts  
Tap , and then take one of the following actions:  
Search: Search for contacts.  
Add to favourites: Add contacts to favourites.  
Remove from favourites: Remove contacts from favourites.  
Grid view List view: View contacts in grid or list form.  
/
Contact groups  
Adding contacts to a group  
Select a group, and then tap . Select contacts to add, and then tap Done  
.
Managing groups  
Tap , and then take one of the following actions:  
Create: Make a new group.  
Search: Search for contacts.  
Change order: Tap and hold next to the group name, drag it up or down to another  
position, and then tap Done  
.
Delete groups: Select user-added groups, and then tap Delete. Default groups cannot be  
deleted.  
Sending a message or email to a group’s members  
Select a group, tap  
Send message or Send email, select members, and then tap Done.  
52  
Communication  
Business card  
Create a business card and send it to others.  
Tap Set up my profile, enter details, such as phone number, email address, and postal  
address, and then tap Save. If user information has been saved when you set up the device,  
select the business card in ME, and then tap to edit.  
Tap  
Share namecard via, and then select a sharing method.  
Messaging  
Use this application to send text messages (SMS) or multimedia messages (MMS).  
Tap Messaging on the Applications screen.  
You may incur additional charges for sending or receiving messages while you are  
outside your home service area. For details, contact your service provider.  
Sending messages  
Tap , add recipients, enter a message, and then tap  
.
Use the following methods to add recipients:  
Enter a phone number.  
Tap , select contacts, and then tap Done  
.
Use the following methods to make a multimedia message:  
Tap and attach images, videos, contacts, notes, events, and others.  
Tap  
Tap  
Insert smiley to insert emoticons.  
Add subject to enter a subject.  
53  
 
Communication  
Viewing incoming messages  
Incoming messages are grouped into message threads by contact.  
Select a contact to view the person’s message.  
Listening to a voice message  
Tap and hold 1 on the keypad, and then follow the instructions from your service provider.  
Email  
Use this application to send or view email messages.  
Tap Email on the Applications screen.  
Setting up email accounts  
Set up an email account when opening Email for the first time.  
Enter the email address and password. Tap Next for a private email account, such as Google  
Mail, or tap Manual setup for a company email account. After that, follow on-screen  
instructions to complete the setup.  
To set up another email account, tap  
Settings  
.
Sending messages  
Tap the email account to use, and then tap  
subject, and message, and then tap  
Tap to add a recipient from the contacts list.  
at the top of the screen. Enter recipients,  
.
Tap  
Add Cc/Bcc to add more recipients.  
Tap to attach images, videos, contacts, notes, events, and others.  
Tap to insert images, events, contacts, and location information into the message.  
54  
 
Communication  
Reading messages  
Select an email account to use, and new messages are retrieved. To manually retrieve new  
messages, tap  
.
Tap a message to read.  
Reply to the message.  
Forward the message.  
Delete the message.  
Add this email address to the  
contacts list.  
Mark the message as a reminder.  
Open attachments.  
Tap the attachment tab to open attachments, and then tap next to an attachment to save  
it.  
Google Mail  
Use this application to quickly and directly access the Google Mail service.  
Tap Google Mail on the Applications screen.  
This application may not be available depending on the region or service provider.  
This application may be labelled differently depending on the region or service  
provider.  
55  
 
Communication  
Sending messages  
In any mailbox, tap , enter recipients, a subject, and a message, and then tap  
.
Tap  
Tap  
Tap  
Tap  
Attach file to attach images.  
Add Cc/Bcc to add more recipients.  
Save draft to save the message for later delivery.  
Discard to start over.  
Reading messages  
Mark the message as a reminder.  
Reply to this message.  
Add this email address to the  
contacts list.  
Reply to all recipients or forward  
this message to others.  
Preview attachment.  
Download attachment.  
Keep this message for long-term  
storage.  
Mark the message as unread.  
Add a label to this message.  
Delete this message.  
56  
Communication  
Labels  
Google Mail does not use actual folders, but uses labels instead. When Google Mail is  
launched, it displays messages labelled Inbox.  
Tap to view messages in other labels.  
To add a label to a message, select the message, tap , and then select the label to assign.  
Talk  
Use this application to chat with others via Google Talk.  
Tap Talk on the Applications screen.  
This application may not be available depending on the region or service provider.  
Public profile  
Tap the account ID at the top of the friends list to change the availability status, image, or  
status message.  
Adding friends  
Tap , enter the email address of the friend to add, and then tap DONE  
.
Chatting with friends  
Select a friend from the friends list, enter a message in the field at the bottom of the screen,  
and then tap  
To add a friend to chat, tap  
.
Add to chat  
.
To end the chat, tap  
End chat  
.
57  
 
Communication  
Switching between chats  
Scroll left or right.  
Deleting chat history  
Chats are automatically saved. To delete chat history, tap  
Clear chat history.  
Google+  
Use this application to stay connected with people via Google’s social network service.  
Tap Google+ on the Applications screen.  
This application may not be available depending on the region or service provider.  
Tap All circles to change the category, and then scroll up or down to view posts from your  
circles.  
Messenger  
Use this application to chat with others via Google+ instant messaging service.  
Tap Messenger on the Applications screen.  
This application may not be available depending on the region or service provider.  
Select a friend from the friends list, enter a message in the field at the bottom of the screen,  
and then tap  
.
58  
 
Communication  
ChatON  
Use this application to chat with any device that has a mobile phone number.  
Tap ChatON on the Applications screen.  
This application may not be available depending on the region or service provider.  
Create the buddies list by entering phone numbers or email addresses of Samsung accounts,  
or selecting buddies from the list of suggestions.  
Select a buddy to start chatting.  
To sync contacts on the device with ChatON, tap Settings Sync contacts  
.
Mobilbox Pro  
Use this application to access voicemails without dialling the voicemail number.  
Tap Mobilbox Pro on the Applications screen.  
This application may not be available depending on the region or service provider.  
59  
 
Web & network  
Internet  
Use this application to browse the Internet.  
Tap Internet on the Applications screen.  
Viewing webpages  
Tap the address field, enter the web address, and then tap Go  
.
Tap  
to share, save, or print the current webpage while viewing a webpage.  
Opening a new page  
Tap  
New window.  
To go to another webpage, tap , scroll left or right, and tap the page to select it.  
Searching the web by voice  
Tap the address field, tap , speak a keyword, and then select one of the suggested keywords  
that appear.  
This feature may not be available depending on the region or service provider.  
Bookmarks  
To bookmark the current webpage, tap  
Add bookmark.  
To open a bookmarked webpage, tap , and then select one.  
60  
 
Web & network  
History  
Tap  
History to open a webpage from the list of recently-visited webpages. To clear the  
history, tap  
Clear history  
.
Tap  
History Most visited to open a webpage from the list of most visited webpages.  
Saved pages  
To view saved webpages, tap  
Saved pages.  
Links  
Tap and hold a link on the webpage to open it in a new page, save, or copy.  
To view saved links, tap  
Downloads.  
Sharing webpages  
To share a webpage address with others, tap  
Share page.  
To share a part of a webpage, tap and hold the desired text, and then tap  
Share.  
Chrome  
Use this application to search for information and browse webpages.  
Tap Chrome on the Applications screen.  
This application may not be available depending on the region or service provider.  
Viewing webpages  
Tap the address field, and then enter a web address or search criteria.  
61  
 
Web & network  
Opening a new page  
Tap  
New tab.  
To go to another webpage, tap  
a webpage.  
Searching the web by voice  
Tap the address field, tap , speak a keyword, and then select one of the suggested keywords  
that appear.  
Syncing with other devices  
Sync open tabs and bookmarks to use with Chrome on another device, when you are logged  
in with the same Google account.  
To view open tabs on other devices, tap  
Other devices. Select a webpage to open.  
To view bookmarks, tap  
.
Bluetooth  
Bluetooth creates a direct wireless connection between two devices over short distances. Use  
Bluetooth to exchange data or media files with other devices.  
Samsung is not responsible for the loss, interception, or misuse of data sent or  
received via the Bluetooth feature.  
Always ensure that you share and receive data with devices that are trusted  
and properly secured. If there are obstacles between the devices, the operating  
distance may be reduced.  
Some devices, especially those that are not tested or approved by the Bluetooth  
SIG, may be incompatible with your device.  
Do not use the Bluetooth feature for illegal purposes (for example, pirating copies  
of files or illegally tapping communications for commercial purposes).  
Samsung is not responsible for the repercussion of illegal use of the Bluetooth  
feature.  
62  
 
Web & network  
To activate Bluetooth, on the Applications screen, tap Settings Bluetooth, and then drag  
the Bluetooth switch to the right.  
Pairing with other Bluetooth devices  
On the Applications screen, tap Settings Bluetooth Scan, and detected devices are  
listed. Select the device you want to pair with, and then accept the auto-generated passkey  
on both devices to confirm.  
Sending and receiving data  
Many applications support data transfer via Bluetooth. An example is Gallery. Open Gallery  
,
select an image, tap  
Bluetooth, and then select one of the paired Bluetooth devices.  
After that, accept the Bluetooth authorisation request on the other device to receive the  
image. The transferred file is saved in the Bluetooth folder. If a contact is received, it is added  
to the contacts list automatically.  
63  
Media  
Music Player  
Use this application to listen to music.  
Tap Music Player on the Applications screen.  
Some file formats are not supported depending on the device’s software version.  
Some files may not play properly depending on the encoding used.  
Playing music  
Select a music category, and then select a song to play.  
Adjust the volume.  
Change the repeat mode.  
Turn on shuꢀe.  
Open Music square.  
Open the playlist.  
Select a sound eꢁect.  
Restart the currently-playing  
song or skip to the previous  
song. Tap and hold to move  
backwards quickly.  
Skip to the next song. Tap and  
hold to move forwards quickly.  
Pause and resume playback.  
64  
 
Media  
Setting a song as ringtone  
To use the currently-playing song as ringtone, tap  
Set as Phone ringtone.  
Creating playlists  
Make an own selection of songs.  
Tap Playlists, and then tap  
Create playlist. Enter a title and tap OK. Tap Add music,  
select songs to include, and then tap Done  
.
To add the currently-playing song to a playlist, tap  
Add to playlist.  
Playing music by mood  
Play music grouped by mood. The playlist is automatically created by the device. When a new  
song is added, tap Music square  
Library update.  
Tap Music square and select a cell of mood. Or select multiple cells by dragging your finger.  
Camera  
Use this application to take photos or videos.  
Use Gallery to view photos and videos taken with the device’s camera. (p. 71)  
Tap Camera on the Applications screen.  
The camera automatically shuts off when unused.  
Camera etiquette  
Do not take photos or videos of other people without their permission.  
Do not take photos or videos where legally prohibited.  
Do not take photos or videos in places where you may violate other people’s privacy.  
65  
 
Media  
Taking photos  
Taking a photo  
Tap the image on the preview screen where the camera should focus. When the subject is in  
focus, the focus frame turns green. Tap  
to take the photo.  
Switch between the  
front and rear  
camera.  
Indicates which  
storage is in use.  
Change the ꢀash  
setting.  
Switch between still  
and video mode.  
Change the shooting  
mode.  
Select among  
various eꢁects that  
are available.  
Open the image  
viewer to display  
photos.  
Change the camera  
settings.  
Scene mode  
Predefined settings make point-and-shoot photos easier to take.  
Tap  
Scene mode.  
Landscape: Use this setting for a wider view.  
Sports: Use this setting for fast-moving subjects.  
Party/Indoor: Use this setting for well-lit indoor scenes.  
Beach/Snow: Use this setting for well-lit or sunny outdoor scenes.  
Sunset: Use this setting for richer colours and sharper contrasts.  
Dawn: Use this setting for very subtle colours.  
66  
Media  
Autumn colour: Use this setting for red-shifted background scenery.  
Text: Use this setting for books or posters.  
Candlelight: Use this setting for images of bright light against a dark background.  
Firework: Use this setting for high-contrast scenes.  
Backlight: Use this setting for subjects with bright lights behind them.  
Night: Use this setting for images taken in darker conditions.  
Shooting mode  
Several photo effects are available, such as cartoon rendering.  
Tap  
Shooting mode.  
Single shot: Take a single photo.  
Continuous: Take a series of photos of moving subjects. When you activate Best photo  
,
you can select and save photos. This mode is available only at 960 x 720 resolution.  
Panorama: Take a photo composed of many photos strung together.  
Buddy photo share: Set the device to recognise a person’s face that you have tagged  
in a photo and send it to that person. Face recognition may fail depending on the face  
angle, face size, skin colour, facial expression, light conditions, or accessories the subject  
is wearing.  
Smile shot: Take a photo while the camera waits for a subject to smile.  
Cartoon: Take a photo that looks like a drawing.  
Panoramic photos  
A panoramic photo is a wide landscape image consisting of multiple shots.  
Tap  
Shooting mode Panorama  
.
Tap  
and move the camera in any direction. When the blue frame aligns with the  
viewfinder, the camera automatically takes another shot in a panoramic sequence. To stop  
shooting, tap again.  
67  
Media  
Taking videos  
Taking a video  
Slide the still-video switch to the video icon, and then tap  
to take a video. To stop  
recording, tap  
.
Manual focus is not available in video mode.  
The zoom function may not be available when recording at the highest resolution.  
Recording mode  
Switch between the  
front and rear  
camera.  
Indicates which  
storage is in use.  
Change the ꢀash  
setting.  
Switch between still  
and video mode.  
Change recording  
mode.  
Select among  
various eꢁects that  
are available.  
Open the video  
player to play videos.  
Change the camera  
settings.  
68  
Media  
Tap  
to change recording mode.  
Normal: Use this mode for normal quality.  
Limit for MMS: Use this mode to lower quality for sending via messaging.  
Zooming in and out  
Use one of the following methods:  
Use the Volume button to zoom in or out.  
Spread two fingers apart on the screen to zoom in, and pinch to zoom out.  
The zoom function may not be available when shooting at the highest resolution.  
The zoom in/out effect is available when using the zoom feature while shooting  
video.  
Configuring settings for Camera  
Tap to configure settings for Camera. Not all of the following options are available in both  
still camera and video camera modes. The available options vary depending on the mode  
used.  
Edit shortcuts: Reorganise shortcuts to frequently-used options.  
Self portrait: Take a photo of yourself.  
Self recording: Take a video of yourself.  
69  
Media  
Flash: Activate or deactivate the flash.  
Shooting mode: Change the shooting mode.  
Recording mode: Change recording mode.  
Effects: Select among various photo effects that are available.  
Scene mode: Change the scene mode.  
Exposure value: This determines how much light the camera’s sensor receives. For low-  
light situations, use a higher exposure.  
Focus mode: Select a focus mode. Auto focus is camera-controlled. Macro is for very  
close objects.  
Timer: Use this for delayed-time shots.  
Resolution: Select a resolution. Use higher resolution for higher quality. But it takes up  
more memory.  
White balance: Select an appropriate white balance, so images have a true-to-life colour  
range. The settings are designed for specific lighting situations. These settings are similar  
to the heat range for white-balance exposure in professional cameras.  
ISO: Select an ISO value. This controls camera light sensitivity. It is measured in film-  
camera equivalents. Low values are for stationary or brightly-lit objects. Higher values are  
for fast-moving or poorly-lit objects.  
Metering: Select a metering method. This determines how light values are calculated.  
Centre-weighted measures background light in the centre of the scene. Spot measures  
the light value at a specific location. Matrix averages the entire scene.  
Guidelines: Display viewfinder guides to help composition when selecting subjects.  
GPS tag: Attach a GPS location tag to the photo.  
To improve GPS signals, avoid shooting in locations where the signal may be  
obstructed, such as between buildings or in low-lying areas, or in poor weather  
conditions.  
Your location may appear on your photos when you upload them to the Internet.  
To avoid this, deactivate the GPS tag setting.  
70  
Media  
Image quality: Set the quality level for photos. Higher quality images require more  
storage space.  
Video quality: Set the quality level for videos.  
Storage: Select the memory location for storage.  
Reset: Reset the camera settings.  
Shortcuts  
Reorganise shortcuts for easy access to the camera’s various options.  
Tap  
Edit shortcuts.  
Tap and hold an option and drag it to a slot at the left of the screen. The other icons can be  
moved within the list by tapping and dragging them.  
Gallery  
Use this application to view images and videos.  
Tap Gallery on the Applications screen.  
Some file formats are not supported depending on the software installed on the  
device.  
Some files may not play properly depending on how they are encoded.  
Viewing images  
Launching Gallery displays available folders. When another application, such as Email, saves  
an image, the download folder is automatically created to contain the image. Likewise,  
capturing a screenshot automatically creates the Screenshots folder. Select a folder to open  
it.  
In a folder, images are displayed by creation date. Select an image to view it in full screen.  
Scroll left or right to view the next or previous image.  
71  
   
Media  
Zooming in and out  
Use one of the following methods to zoom in an image:  
Double-tap anywhere to zoom in.  
Spread two fingers apart on any place to zoom in. Pinch to zoom out, or double-tap to  
return.  
Viewing images using the motion feature  
Use the motion feature to execute a function with particular motion.  
On the Applications screen, tap Settings Motion, drag the Motion switch to the right, and  
then select features by ticking.  
To stop using a motion feature, drag the Motion switch to the left.  
To set the sensitivity for each motion feature, tap Sensitivity settings, select a feature, and  
then use the adjustable slide bar.  
Playing videos  
Video files show the icon on the preview. Select a video to watch it and tap , and Video  
Player launches.  
Editing images  
When viewing an image, tap  
and use the following functions:  
Delete: Delete the image.  
Face tag: Register the faces in the image as face tags.  
Copy to clipboard: Copy to clipboard.  
Rotate left: Rotate anticlockwise.  
Rotate right: Rotate clockwise.  
Crop: Resize the orange frame to crop and save the image in it.  
72  
Media  
Edit: Launch the Photo editor application.  
Set as: Set the image as a wallpaper or a contact image.  
Buddy photo share: Send the image to a person whose face is tagged in the image.  
Print: Print via a USB or Wi-Fi connection. The device is only compatible with some  
Samsung printers.  
Rename: Rename the file.  
Scan for nearby devices: Search for devices that have media sharing activated.  
Details: View image details.  
Deleting images  
Use one of the following methods:  
In a folder, tap  
Select item, select images, and then tap  
Delete.  
When viewing an image, tap  
Delete  
.
Sharing images  
Use one of the following methods:  
In a folder, tap  
Select item, select images, and then tap to send them to others.  
When viewing an image, tap to send it to others or share it via social network services.  
Setting as wallpaper  
When viewing an image, tap  
Set as to set the image as wallpaper or to assign it to a  
contact.  
73  
Media  
Video Player  
Use this application to play video files.  
Tap Video Player on the Applications screen.  
Some file formats are not supported depending on the device's software.  
Some files may not play properly depending on how they are encoded.  
Playing videos  
Select a video to play.  
Adjust the volume.  
Move forwards or  
backwards by  
Skip to the next  
video. Tap and hold  
to move forwards  
quickly.  
dragging the bar.  
Change screen ratio.  
Reduce the size of  
the video screen.  
Restart the current  
video or skip to the  
previous video. Tap  
and hold to move  
backwards quickly.  
Pause and resume  
playback.  
Deleting videos  
Tap  
Delete, select videos by ticking, and then tap Delete.  
Sharing videos  
Tap  
Share via, select videos by ticking, tap Done, and then select a sharing method.  
74  
 
Media  
YouTube  
Use this application to watch videos from the YouTube website.  
Tap YouTube on the Applications screen.  
This application may not be available depending on the region or service provider.  
Watching videos  
Tap , and then enter a keyword. Select one of the returned search results to watch a video.  
Rotate the device to landscape orientation to display full screen.  
Add the video to  
the playlist.  
Search for videos.  
Pause or resume  
Send the URL to  
others.  
playback.  
Move forwards or  
backwards by  
dragging the bar.  
Rotate the screen to  
portrait orientation.  
Change display  
quality.  
Sharing videos  
Select the video to view, tap , and then select a sharing method.  
Uploading videos  
Select your account, tap , select a video, enter information for the video, and then tap  
Upload  
.
75  
 
Media  
FM Radio  
Listen to music and news on the FM radio. To listen to the FM radio, you must connect a  
headset, which serves as the radio antenna.  
Tap FM Radio on the Applications screen.  
Listening to the FM radio  
Plug a headset into the device before launching the FM radio.  
The FM radio scans and saves available stations automatically when running for the  
first time.  
Tap to turn on the FM radio. Select the radio station you want from the stations list and tap  
to return to the FM radio screen.  
Record a song from the FM radio.  
Adjust the volume.  
Access services for the current  
station.  
Turn the FM radio on or off.  
Fine-tune the frequency.  
Search for an available radio  
station.  
Add the current radio station to  
the favourites list.  
76  
 
Media  
Scanning radio stations  
Tap  
Scan, and then select a scan option. The FM radio scans and saves available  
stations automatically.  
Select the radio station you want from the stations list and tap  
screen.  
to return to the FM radio  
Adding stations to the favourites list  
Scroll to a radio station, and then tap to add the station to the favourites list.  
Flipboard  
Use this application to access your personalised magazines.  
Tap Flipboard on the Applications screen.  
This application may not be available depending on the region or service provider.  
To start your Flipboard, flick up on the greeting page, tap Get Started, select news topics, and  
then tap Done  
.
Select a cover story or a topic, flick through the Flipboard pages, and then select an article to  
read.  
While reading an article, use the following icons:  
: Go to the previous page.  
: Share the article via Twitter.  
: Add the article to the favourites list in Twitter.  
: Share the article with others.  
: View otherscomments about the article.  
77  
 
Application & media stores  
Play Store  
Use this application to purchase and download applications and games that are able to run  
on the device.  
Tap Play Store on the Applications screen.  
This application may not be available depending on the region or service provider.  
Installing applications  
Browse applications by category, or tap to search with a keyword.  
Select an application to view information. To download it, tap Install. If there is a charge for  
the application, tap the price, and follow on-screen instructions to complete the purchase  
process.  
When a new version is available for any installed application, an update icon  
appears at the top of the screen to alert you to the update. Open the notifications  
panel and tap the icon to update the application.  
To install applications that you downloaded from other sources, on the  
Applications screen, tap Settings Security Unknown sources  
.
Uninstalling applications  
Uninstall the applications purchased from Play Store  
.
Tap  
My Apps, select an application to delete in the list of installed applications, and  
then tap Uninstall  
.
78  
 
Application & media stores  
Samsung Apps  
Use this application to purchase and download dedicated Samsung applications. For more  
Tap Samsung Apps on the Applications screen.  
This application may not be available depending on the region or service provider.  
If a Samsung account is not registered, follow on-screen instructions to create a Samsung  
account. To complete the subscription process, read the terms and conditions, and then tap  
Accept to agree to them.  
Installing applications  
Browse applications by category. Tap to select a category.  
To search for an application, tap at the top of the screen, and then enter a keyword in the  
search field.  
Select an application to view information. To download it, tap Get or Buy  
.
When a new version is available for any installed application, an update icon appears  
at the top of the screen to alert you to the update. Open the notifications panel and  
tap the icon to update the application.  
S Suggest  
Use this application to browse and download the latest applications suggested by Samsung.  
Tap S Suggest on the Applications screen.  
This application may not be available depending on the region or service provider.  
79  
 
Application & media stores  
TopApps  
Use this application to purchase and download applications.  
Tap TopApps on the Applications screen.  
This application may not be available depending on the region or service provider.  
Game Hub  
Use this application to access games.  
Tap Game Hub on the Applications screen.  
This application may not be available depending on the region or service provider.  
Scroll left or right and select a game to download from Samsung Apps  
.
Play Books  
Use this application to read and download book files.  
Tap Play Books on the Applications screen.  
This application may not be available depending on the region or service provider.  
Select a book file by scrolling left or right. While reading a book file, tap  
additional options.  
to access  
To purchase book files, tap  
.
80  
 
Application & media stores  
Play Movies  
Use this application to watch, download, and rent movies or TV shows.  
Tap Play Movies on the Applications screen.  
This application may not be available depending on the region or service provider.  
Select a category at the top of the screen, and then select a movie, TV programme, or video to  
play or rent.  
Video Hub  
Use this application to access and purchase videos.  
Tap Video Hub on the Applications screen.  
This application may not be available depending on the region or service provider.  
Select a category, and then select a video.  
Telekom Music  
Use this application to listen to songs on the device or the web server provided by Telekom  
Music, and purchase songs.  
Tap Telekom Music on the Applications screen.  
This application may not be available depending on the region or service provider.  
81  
 
Application & media stores  
TOP GAMES  
Use this application to purchase and download games.  
Tap TOP GAMES on the Applications screen.  
This application may not be available depending on the region or service provider.  
82  
 
Utilities  
Memo  
Use this application to record important information to save and view at a later date.  
Tap Memo on the Applications screen.  
Composing memos  
Tap , enter a memo, and then tap Save  
.
To change the background colour, tap  
.
To lock the memo so that others cannot view it, tap  
.
Browsing memos  
Browse memo thumbnails by scrolling up or down.  
To edit the memo, tap  
.
To search for a memo, tap  
To delete memos, tap  
Search  
Delete  
.
To send memos to others, tap  
To sort memos by date or colour, tap  
Send.  
Sort by  
.
To sync memos with a Google account, tap  
To set a PIN to lock or unlock a memo, tap  
Sync memo.  
PIN lock  
.
Viewing a memo  
Tap the memo thumbnail to open it. Scroll left or right to see more memos.  
Tap and use the following:  
: Delete the memo.  
83  
 
Utilities  
: Change the background colour.  
: Lock the memo so that others cannot view it.  
: Print the memo via a USB or Wi-Fi connection. The device is only compatible with  
some Samsung printers.  
S Planner  
Use this application to manage events and tasks.  
Tap S Planner on the Applications screen.  
Creating events or tasks  
Tap , and then use one of the following methods:  
Quick add: Create an event or task from a memo. This feature is available only for English  
and Korean.  
Add event: Enter an event with an optional repeat setting.  
Add task: Enter a task with an optional priority setting.  
To add an event or task more briefly, tap a date to select it and tap it again.  
84  
 
Utilities  
Enter a title and specify which calendar to use or sync with. Then tap Edit event details or  
Edit task details to add more details, such as how often the event repeats, when it has an  
advance alert, or where it takes place.  
Attach a map showing the location of the event. Enter the location in the Location field, tap  
next to the field, and then pinpoint the precise location by tapping and holding on the  
map that appears.  
Attach an image. Tap Images, and then take a photo or select one of the existing images.  
Syncing with Google Calendar  
On the Applications screen, tap Settings Google under Accounts, select the Google  
account, and then tick Sync Calendar. To manually sync for updating, on the Applications  
screen, tap S Planner  
To display synced events or tasks, tap  
account, and then tap Done  
Sync.  
Settings Calendars, select the Google  
.
Changing calendar type  
Tap , and then select one from among different types of calendars including year, month,  
week, and others. A pinch gesture can be used to change calendar type. For example, pinch  
to change from the monthly calendar to the yearly calendar, and spread apart to change  
yearly calendar back to monthly calendar.  
Searching for events  
Tap  
Search, and then enter a keyword to search for.  
To view today’s events, tap Today at the top of the screen.  
85  
Utilities  
Deleting events  
Select a date or event, and then tap  
Delete.  
Sharing events  
Select an event, tap  
Share via, and then select a sharing method.  
Clock  
Use this application to set alarms, check the time in any location in the world, measure the  
duration of an event, set a timer, or use as the desk clock.  
Tap Clock on the Applications screen.  
Turn this alarm on or off.  
86  
 
Utilities  
Alarm  
Setting alarms  
Tap Create alarm, set a time for the alarm to go off, select days for the alarm to repeat, and  
then tap Save  
.
Snooze: Set an interval and the number of times for the alarm to repeat after the preset  
time.  
Smart alarm: Set a time for the alarm to go off before the preset time.  
Stopping alarms  
Drag outside the large circle to stop an alarm. Drag  
the alarm after a specified length of time.  
outside the large circle to repeat  
Deleting alarms  
Tap and hold the alarm, and then tap Delete  
.
World clock  
Creating clocks  
Tap Add city, and then enter a city name or select a city from the cities list.  
To apply summer time, tap and hold a clock, and then tap DST settings  
.
Deleting clocks  
Tap  
Delete, select clocks, and then tap Delete.  
87  
Utilities  
Stopwatch  
Tap Start to time an event. Tap Lap to record lap times.  
Tap Reset to clear lap time records.  
Timer  
Set the duration, and then tap Start  
.
Drag outside the large circle when the timer goes off.  
Desk clock  
Tap to view in full screen.  
Calculator  
Use this application for simple or complex calculations.  
Tap Calculator on the Applications screen.  
Rotate the device to landscape orientation to display the scientific calculator. If Screen  
rotation is disabled, tap  
Scientific calculator  
to hide the keypad.  
Clear history  
.
To see calculation history, tap  
To clear history, tap  
.
To change the character size for history, tap  
Text size.  
Voice Recorder  
Use this application to record or play voice memos.  
Tap Voice Recorder on the Applications screen.  
88  
 
Utilities  
Recording voice memos  
Tap to start recording. Speak into the microphone at the bottom of the device. Tap to  
pause recording. Tap to finish recording.  
Recording elapsed time  
Start recording.  
Display the list of voice memos.  
Playing voice memos  
Select a voice memo to play.  
: Adjust the playback speed.  
: Trim the voice memo.  
: Adjust the volume by dragging the volume bar up or down.  
: Stop playback.  
: Pause playback.  
To send a voice memo to others, tap  
then select a sharing method.  
Share via, select a voice memo, tap Done, and  
89  
Utilities  
Managing voice memos  
In the list of voice memos, tap  
and select one of the following:  
Share via: Select voice memos to send, and then select a sharing method.  
Delete: Select voice memos to delete.  
Settings: Change the voice recorder settings.  
End: Close the voice recorder.  
S Voice  
Use this application to command by voice the device to dial a number, send a message, write  
a memo, and more.  
Tap S Voice on the Applications screen.  
Here are several examples of spoken commands:  
Open music  
Launch calculator  
Call Lulu mobile  
Dial Lulu work  
Check schedule  
Google  
Use this application to search not only the Internet, but also applications and their contents  
on the device as well.  
Tap Google on the Applications screen.  
90  
 
Utilities  
Searching the device  
Tap the search field, and then enter a keyword. Alternatively, tap , speak a keyword, and  
then select one of the suggested keywords that appear.  
If no results are returned from the applications, the web browser appears, displaying the  
search results.  
Search scope  
To select what applications to search, tap  
Settings Phone search, and then tick the  
items to search for.  
Voice Search  
Use this application to search webpages by speaking.  
Tap Voice Search on the Applications screen.  
This application may not be available depending on the region or service provider.  
Speak a keyword or phrase when Speak now appears on the screen. Select one of the  
suggested keywords that appear.  
My Files  
Use this application to access all kinds of files stored in the device, including images, videos,  
songs, and sound clips.  
Tap My Files on the Applications screen.  
Select a category, and then select a folder to open it. To go back to the parent folder, tap  
To return to the root directory, tap  
In a folder, tap , and then use one of the following options:  
.
.
Select all: Select all files to apply the same option to them at once.  
Create folder: Create a folder.  
91  
 
Utilities  
Search: Search for files.  
View by: Change the view mode.  
Sort by: Sort files or folders.  
Settings: Change the file manager settings.  
Downloads  
Use this application to see what files are downloaded through the applications.  
Tap Downloads on the Applications screen.  
This application may not be available depending on the region or service provider.  
To see the files downloaded from the Internet, tap Internet downloads, otherwise, tap Other  
downloads to see the files downloaded from other applications, such as Email  
.
Select a file to open it with an appropriate application.  
Kundencenter  
Use this application to access online customer service centre.  
Tap Kundencenter on the Applications screen.  
This application may not be available depending on the region or service provider.  
92  
 
Utilities  
Mediencenter  
Use this application to view and upload media files via the cloud storage server.  
Tap Mediencenter on the Applications screen.  
This application may not be available depending on the region or service provider.  
Mobile TV  
Use this application to watch TV shows online.  
Tap Mobile TV on the Applications screen.  
This application may not be available depending on the region or service provider.  
93  
 
Travel & local  
Maps  
Use this application to pinpoint the location of the device, search for places, or get directions.  
Tap Maps on the Applications screen.  
This application may not be available depending on the region or service provider.  
Searching for locations  
Tap , enter an address, and then tap . Select a location to view the detailed location  
information. To search for nearby locations, tap  
.
Once the location is found, tap and use one of the following functions:  
Clear Map: Clear the map.  
Make available offline: Save the map of a specified area to view it offline.  
Directions: Get directions for the found location.  
Layers: Overlay multiple layers including satellite images, traffic information, and more.  
Settings: Change the map settings.  
Help: View information about using the map.  
To view current location, tap  
.
94  
 
Travel & local  
Getting directions for a destination  
Tap  
.
1
2
Tap , and then select a method to enter starting and ending locations:  
My current location: Use current location for starting location.  
Contacts: Select from the contacts list.  
Point on map: Pinpoint by tapping on the map.  
My Places: Select from the list of favourite places.  
Select a travel method, such as driving, public transit, or walking, and then tap GET  
3
4
DIRECTIONS  
.
Select one of the routes that appear, and then tap MAP VIEW to view details.  
Local  
Use this application to search for nearby restaurants, banks, bus stops, and more.  
Tap Local on the Applications screen.  
This application may not be available depending on the region or service provider.  
Select a place category, and then select a place from the list of search results.  
Map: Pinpoint the place on the map.  
Directions: Search for a route to the place.  
Call: Call the place’s phone number.  
To add a place category, tap  
search into the text field.  
Add a search on the category list, enter a keyword to  
95  
 
Travel & local  
Latitude  
Use this application to share location information with friends.  
Tap Latitude on the Applications screen.  
This application may not be available depending on the region or service provider.  
To add a friend with whom location information is shared, tap  
Select from Contacts or  
Add via email address. Select one from contacts or enter an email address, and then tap Add  
friends to send an invitation. Once the invitation is accepted, either party can know where  
the other party is located.  
Navigation  
Use this application to search for a route to a destination.  
Tap Navigation on the Applications screen.  
Navigation maps, your current location, and other navigational data may differ  
from actual location information. You should always pay attention to road  
conditions, traffic, and any other factors that may affect your driving. Follow all  
safety warnings and regulations while driving.  
This application may not be available depending on the region or service provider.  
Specify the destination by using one of the following methods:  
Speak the destination address.  
Enter the destination address.  
Select the destination address from the contacts list.  
Select the destination from the list of starred places.  
Once a route is found, follow on-screen instructions to navigate to the destination.  
96  
 
Travel & local  
NAVIGON select  
Use this application to search for a route to a destination.  
Tap NAVIGON select on the Applications screen.  
Navigation maps, your current location, and other navigational data may differ  
from actual location information. You should always pay attention to road  
conditions, traffic, and any other factors that may affect your driving. Follow all  
safety warnings and regulations while driving.  
This application may not be available depending on the region or service provider.  
97  
 
Settings  
About Settings  
Use this application to configure the device, set application options, and add accounts.  
Tap Settings on the Applications screen.  
Wi-Fi  
Activate the Wi-Fi feature to connect to a Wi-Fi network and access the Internet or other  
network devices.  
To use options, tap  
.
Advanced: Customise Wi-Fi settings.  
WPS push button: Connect to a secured Wi-Fi network with a WPS button.  
WPS PIN entry: Connect to a secured Wi-Fi network with a WPS PIN.  
Setting Wi-Fi sleep policy  
On the Settings screen, tap Wi-Fi  
Advanced Keep Wi-Fi on during sleep.  
When entering power-saving mode, the device automatically turns off Wi-Fi  
connections. When this happens, the device automatically accesses data networks if it  
is set to use them. This may incur data transfer fees. To avoid data-usage bills, set this  
option to Always  
.
Setting Network notification  
The device can detect open Wi-Fi networks and display an icon on the status bar to notify  
when available.  
On the Settings screen, tap Wi-Fi  
Advanced and tick Network notification to  
activate this feature.  
98  
   
Settings  
Bluetooth  
Activate the Bluetooth feature to exchange information over short distances.  
Data usage  
Keep track of your data usage amount, and customise the settings for the limitation.  
Mobile data: Set to use data connections on any mobile network.  
Set mobile data limit: Set a limit for the mobile data usage.  
Data usage cycle: Enter monthly reset date to monitor your data usage.  
To use more options, tap  
.
Data roaming: Set to use data connections when you are roaming.  
Restrict background data: Set to disable sync in the background while using a mobile  
network.  
Auto sync data: Set the device to sync contact, calendar, email, bookmark, and social  
network image data automatically.  
Show Wi-Fi usage: Set to show your data usage via Wi-Fi.  
Mobile hotspots: Search for and use another device’s mobile network.  
More settings  
Customise settings to control connections with other devices or networks.  
Flight mode  
This disables all wireless functions on your device. You can use only non-network services.  
99  
 
Settings  
Mobile networks  
Mobile data: Use to allow packet switching data networks for network services.  
Data roaming: Use the device to connect to another network when you are roaming or  
your home network is not available.  
Access Point Names: Set up access point names (APNs).  
Network mode: Select a network type.  
Network operators: Search for available networks and select a network for roaming.  
Tethering and portable hotspot  
Portable Wi-Fi hotspot: Use the portable Wi-Fi hotspot to share the device’s mobile  
network connection with computers or other devices through the Wi-Fi network.  
USB tethering: Use USB tethering to share the device’s mobile network connection with  
a computer via USB. When connected to a computer, the device is used as a wireless  
modem for the computer.  
Bluetooth tethering: Use the Bluetooth tethering to share the device’s mobile network  
connection with computers via Bluetooth.  
Help: Learn more about USB, Wi-Fi, and Bluetooth tethering.  
VPN  
Set up and connect to virtual private networks (VPNs).  
Nearby devices  
File sharing: Activate media sharing to allow other DLNA-enabled devices to access  
media files on your device.  
Shared contents: Set to share your content with other devices.  
Device name: Enter a media server name for your device.  
Allowed devices list: View the list of devices that can access your device.  
100  
Settings  
Not-allowed devices list: View the list of devices that are blocked from accessing your  
device.  
Download to: Select a memory location for saving media files.  
Upload from other devices: Set to accept uploads from other devices.  
Kies via Wi-Fi  
Connect the device to Samsung Kies via a Wi-Fi network.  
Home screen mode  
Select a Home screen mode (basic or easy).  
Blocking mode  
Select which notifications will be blocked or set to allow notifications for calls from specified  
contacts in blocking mode.  
Sound  
Change settings for various sounds on the device.  
Volume: Adjust the volume level for call ringtones, music and videos, system sounds, and  
notifications.  
Device ringtone: Select a ringtone to alert you to incoming calls.  
Device vibration: Add or select a vibration pattern.  
Default notifications: Select a ringtone for events, such as incoming messages, missed  
calls, and alarms.  
101  
 
Settings  
Vibrate when ringing: Set the device to vibrate and play a ringtone for incoming calls.  
Keytones: Set the device to sound when tapping the buttons on the keypad.  
Touch sounds: Set the device to sound when selecting an application or option on the  
touch screen.  
Screen lock sound: Set the device to sound when locking or unlocking the touch screen.  
Display  
Change the settings for the display.  
Wallpaper  
:
Home screen: Select a background image for the Home screen.  
Lock screen: Select a background image for the locked screen.  
Home and lock screens: Select a background image for the Home screen and the  
locked screen.  
Brightness: Set the brightness of the display.  
Auto-rotate screen: Set the content to rotate automatically when the device is turned.  
Screen timeout: Set the length of time the device waits before turning off the display’s  
backlight.  
Smart stay: Set to prevent the display backlight from turning off while you are looking at  
the display.  
Font style: Change the font type for display text.  
Font size: Change the font size.  
Touch key light duration: Set the duration for the touch button backlight.  
Display battery percentage: Set to view the remaining battery life.  
Auto adjust screen tone: Set to save power by adjusting the brightness of the display.  
102  
 
Settings  
Storage  
View memory information for your device and memory card, or format a memory card.  
Formatting a memory card permanently deletes all data from it.  
The actual available capacity of the internal memory is less than the specified  
capacity because the operating system and default applications occupy part of the  
memory.  
Power saving mode  
Activate power-saving mode and change the settings for power-saving mode.  
CPU power saving: Set the device to limit some system resource usage.  
Screen power saving: Set the device to decrease the brightness of the display.  
Learn about Power saving mode: Discover how to reduce battery consumption.  
Battery  
View the amount of battery power consumed by your device.  
Application manager  
View and manage the applications on your device.  
103  
 
Settings  
Location services  
Use wireless networks: Set to use Wi-Fi and/or mobile networks for finding the current  
location.  
Use GPS satellites: Set to use the GPS satellite for finding the current location.  
Location and Google search: Set to use your current location for Google search and  
other Google services.  
Lock screen  
Change settings for securing the device.  
Screen lock: Activate the screen lock feature.  
Lock screen options: Change the settings for the locked screen. These settings are  
applied only when you set the swipe lock option.  
Shortcuts: Set to show and edit application shortcuts on the locked screen.  
This feature may not be available depending on the region or service provider.  
Information ticker: Set to show news or stock information on the locked screen.  
This feature may not be available depending on the region or service provider.  
Clock: Set to show the clock on the locked screen.  
Dual clock: Set to show the dual clock on the locked screen.  
Weather: Set to show weather information on the locked screen.  
Ripple effect: Set to show the ripple effect on the locked screen.  
Help text: Set to show the help text on the locked screen.  
Camera quick access: Set the device to launch the camera by tapping and holding  
the screen and rotating the device while the screen is locked.  
Wake up in lock screen: Set the device to recognise your wake up command when  
the screen is locked.  
Set wake-up command: Set a wake up command to launch S Voice or perform a  
specified function.  
Owner information: Enter your information that is shown on the locked screen.  
104  
 
Settings  
Security  
Change settings for securing the device and the SIM or USIM card.  
Encrypt device: Set a password to encrypt data saved on the device. You must enter the  
password each time you turn on the device.  
Charge the battery before enabling this setting because it may take more than an  
hour to encrypt your data.  
Encrypt external SD card  
:
Encrypt: Set to encrypt files when you save them to a memory card.  
Full encryption: Set to encrypt all files on a memory card.  
Exclude multimedia files: Set to encrypt all files on a memory card, except for media  
files.  
If you reset your device to the factory defaults with this setting enabled, the device  
will not be able to read your encrypted files. Disable this setting before resetting the  
device.  
Remote controls: Set to allow control of your lost or stolen device remotely via the  
Internet. To use this feature, you must sign in to your Samsung account.  
Account registration: Add or view your Samsung account.  
Use wireless networks: Set to allow location data collection and to determine the  
location of your lost or stolen device via Wi-Fi and mobile networks.  
SIM Change Alert: Activate the Find my mobile feature.  
Find my mobile web page: Access the SamsungDive website (www.samsungdive.com).  
You can track and control your lost or stolen device on the SamsungDive website.  
Set up SIM card lock  
:
Lock SIM card: Activate or deactivate the PIN lock feature to require the PIN before  
using the device.  
Change SIM PIN: Change the PIN used to access SIM or USIM data.  
Make passwords visible: By default, the device hides passwords for security. Set the  
device to display passwords as they are entered.  
105  
 
Settings  
Device administrators: View device administrators installed on the device. You can allow  
device administrators to apply new policies to the device.  
Unknown sources: Choose to install applications from any source. If not chosen,  
download applications only from Play Store  
.
Trusted credentials: Use certificates and credentials to ensure secure use of various  
applications.  
Install from device storage: Install encrypted certificates stored on the USB storage.  
Clear credentials: Erase the credential contents from the device and reset the password.  
Language and input  
Change the settings for text input.  
Language  
Select a display language for all menus and applications.  
Default  
Select a default keyboard type for text input.  
Google voice typing  
To change the voice input settings, tap  
.
Choose input languages: Select input languages for text input.  
Block offensive words: Set to prevent the device from recognising offensive words in  
voice inputs.  
Download offline speech recognition: Download and install language data for offline  
voice input.  
106  
 
Settings  
Samsung keyboard  
To change the Samsung keyboard settings, tap  
.
Portrait keyboard types: Change the keyboard layout.  
Input language: Select languages for text input.  
Predictive text: Activate predictive text mode to predict words based on your input and  
show word suggestions. You can also customise the word prediction settings.  
Continuous input: Set to enter text by sweeping on the keyboard.  
Keyboard swipe: Enable or disable the keyboard sweeping feature for the text input  
mode. Switch between input modes by scrolling left or right on the keyboard.  
Handwriting: Customise settings for handwriting mode, such as recognition time, pen  
thickness, or pen colour.  
Voice input: Activate the voice input feature to enter text by voice.  
Auto capitalisation: Set the device to automatically capitalise the first character after a  
final punctuation mark, such as a full stop, question mark, or exclamation mark.  
Auto-punctuate: Set the device to insert a full stop when you double-tap the space bar.  
Character preview: Set the device to display a large image of each character tapped.  
Key-tap sound: Set the device to sound when a key is touched.  
Tutorial: Learn how to enter text with the Samsung keyboard.  
Reset settings: Reset Samsung keyboard settings.  
Voice recogniser  
Select a voice recognition engine.  
107  
Settings  
Voice search  
For Samsung voice recognition, use the following options:  
Language: Select a language for the voice recognition.  
Open via the home key: Set to launch S Voice by pressing the Home button twice.  
Use location data: Set to use location information for voice search results.  
Hide offensive words: Hide offensive words from voice search results.  
Help: Access help information for S Voice  
.
About: View version information.  
Auto-start speaker: Set to automatically turn on the speakerphone when making a call  
with S Voice  
.
Show body of message: Set to view the text of a new message received while in driving  
mode.  
Wake up command: Set to start voice recognition by saying a wake up command while  
using S Voice  
.
Wake up in lock screen: Set the device to recognise commands for controlling the device  
when the screen is locked.  
Set wake-up command: Set a wake up command to launch S Voice or perform a  
specified function.  
Check missed events: Set to check missed calls, messages, or events when S Voice is  
launched by pressing the headset button.  
Home address: Enter your home address to use location information with the voice  
command feature.  
Log in to Facebook: Enter your Facebook account information by voice.  
Log in to Twitter: Enter your Twitter account information by voice.  
108  
Settings  
For Google voice recognition, use the following options:  
Language: Select a language for the voice recognition.  
Speech output: Set the device to provide voice feedback to alert you to the current  
action.  
Block offensive words: Hide offensive words from voice search results.  
Download offline speech recognition: Download and install language data for offline  
voice input.  
Text-to-speech output  
Preferred TTS engine: Select a speech synthesis engine. To change the settings for  
speech synthesis engines, tap  
.
Speech rate: Select a speed for the text-to-speech feature.  
Listen to an example: Listen to the spoken text for an example.  
Driving mode: Activate driving mode to set the device to read contents aloud and  
specify applications to use in driving mode.  
Pointer speed  
Adjust the pointer speed for the mouse or trackpad connected to your device.  
Backup and reset  
Change the settings for managing settings and data.  
Back up my data: Set to back up settings and application data to the Google server.  
Backup account: Set up or edit your Google backup account.  
Automatic restore: Set to restore settings and application data when the applications are  
reinstalled on the device.  
Factory data reset: Reset settings to the factory default values and delete all data.  
109  
 
Settings  
Add account  
Add email or SNS accounts.  
Motion  
Activate the motion feature and change settings for motion recognition.  
Direct call: Set to make a voice call by picking up and holding the device near your ear  
while viewing call, message, or contact details.  
Smart alert: Set the device to alert you if you have missed calls or new messages when  
you pick up the device.  
Double tap to top: Set to move to the top of a list of contacts or email messages when  
you double-tap the device.  
Tilt to zoom: Set to zoom in or out while viewing images in Gallery or browsing  
webpages, when you tap and hold two points with your fingers and then tilt the device  
back and forth.  
Pan to move icon: Set to move an item to another page when tapping and holding the  
item and then panning the device to the left or right.  
Pan to browse images: Set to scroll through an image by moving the device in any  
direction when the image is zoomed in.  
Shake to update: Set the device to search for Bluetooth devices by shaking it.  
Turn over to mute/pause: Set to mute incoming calls, alarms, music, and the FM radio by  
placing the device face down.  
Sensitivity settings: Adjust the reaction speed for each motion.  
Learn about motions: View the tutorial for controlling motions.  
110  
 
Settings  
Accessory  
Change the accessory settings.  
Dock sound: Set the device to play a sound when your device is connected to or  
removed from a car or desktop dock.  
Audio output mode: Set to use the dock speaker when your device is connected to a car  
or desktop dock.  
Desk home screen display: Set the device to show the desk clock when your device is  
connected to a car or desktop dock.  
Audio applications: Set the device to show which applications are available when you  
connect a headset to the device.  
Date and time  
Access and alter the following settings to control how the device displays the time and date.  
If the battery remains fully discharged or removed from the device, the time and date  
is reset.  
Automatic date and time: Automatically update the time and date when moving across  
time zones.  
Set date: Set the current date manually.  
Set time: Set the current time manually.  
Automatic time zone: Set to receive time zone information from the network when you  
move across time zones.  
Select time zone: Set the home time zone.  
Use 24-hour format: Display time in 24-hour format.  
Select date format: Select a date format.  
111  
 
Settings  
Accessibility  
Accessibility services are special features for those with certain physical disabilities. Access  
and alert the following settings to improve accessibility to the device.  
Auto-rotate screen: Set the interface to rotate automatically when you rotate the device.  
Screen timeout: Set the length of time the device waits before turning off the display’s  
backlight.  
Speak passwords: Set the device to read aloud passwords you enter with Talkback.  
Answering/Ending calls  
:
The home key answers calls: Set the device to answer an incoming call when  
pressing the Home button.  
The power key ends calls: Set the device to end a call when pressing the Power  
button.  
Accessibility shortcut: Add a shortcut to Accessibility on the quick menu that appears  
when you press and hold the Power button.  
TalkBack: Activate Talkback, which provides voice feedback.  
Font size: Change the font size.  
Text-to-speech output  
:
Preferred TTS engine: Select a speech synthesis engine. To change the settings for  
speech synthesis engines, tap  
.
Speech rate: Select a speed for the text-to-speech feature.  
Listen to an example: Listen to the spoken text for an example.  
Driving mode: Activate driving mode to set the device to read contents aloud and  
specify applications to use in driving mode.  
112  
 
Settings  
Enhance web accessibility: Set applications to install web scripts to make their web  
content more accessible.  
Mono audio: Enable mono sound when listening to audio with one earbud.  
Turn off all sounds: Mute all device sounds.  
Tap and hold delay: Set the recognition time for tapping and holding the screen.  
Developer options  
Change the settings for application development.  
Desktop backup password: Set a password to secure your backup data.  
Stay awake: Set the screen to remain on while you are charging the battery.  
Protect SD card: Set to request a confirmation when reading data from a memory card.  
USB debugging: Activate USB debugging mode to connect your device to a computer  
with a USB cable.  
Allow mock locations: Allow mock locations and service information to be sent to a  
Location Manager service for testing.  
Select debug app: Select applications to debug and prevent errors when you pause  
debugging.  
Wait for debugger: Set to prevent the selected application from loading until the  
debugger is ready.  
Show touches: Set to show the pointer when you touch the screen.  
Show pointer location: Set to show the coordinates and traces of the pointer when you  
touch the screen.  
Show layout boundaries: Set to show boundaries.  
113  
 
Settings  
Show GPU view updates: Set to flash areas of the screen when they are updated with  
the GPU.  
Show screen updates: Set to flash areas of the screen when they are updated.  
Window animation scale: Select a speed for opening and closing pop-up windows.  
Transition animation scale: Select a speed for switching between screens.  
Animator duration scale: Select how long pop-up windows will be shown.  
Disable hardware overlays: Set to hide hardware overlays.  
Force GPU rendering: Set to use 2D hardware acceleration to improve graphic  
performance.  
Strict mode: Set the device to flash the screen when applications perform long  
operations.  
Show CPU usage: Set to list all active processes.  
Profile GPU rendering: Set to check the time of GPU rendering time.  
Enable traces: Set to capture traces of application and system performance.  
Do not keep activities: Set to end a running application when you launch a new  
application.  
Limit background processes: Set to limit the number of processes that can run in the  
background.  
Show all ANRs: Set the device to alert you to unresponsive applications that are running  
in the background.  
About device  
Access device information and update device software.  
114  
 
Troubleshooting  
When you turn on your device or while you are using the device, it  
prompts you to enter one of the following codes:  
Password: When the device lock feature is enabled, you must enter the password you set  
for the device.  
PIN: When using the device for the first time or when the PIN requirement is enabled, you  
must enter the PIN supplied with the SIM or USIM card. You can disable this feature by  
using the Lock SIM card menu.  
PUK: Your SIM or USIM card is blocked, usually as a result of entering your PIN incorrectly  
several times. You must enter the PUK supplied by your service provider.  
PIN2: When you access a menu requiring the PIN2, you must enter the PIN2 supplied with  
the SIM or USIM card. For details, contact your service provider.  
Your device displays network or service error messages  
When you are in areas with weak signals or poor reception, you may lose reception. Move  
to another area and try again.  
You cannot access some options without a subscription. Contact your service provider for  
more details.  
The touch screen responds slowly or improperly  
If your device has a touch screen and the touch screen is not responding properly, try the  
following:  
Remove any protective covers from the touch screen. Protective covers may prevent the  
device from recognising your inputs and are not recommended for touch screen devices.  
Ensure that your hands are clean and dry when tapping the touch screen.  
Restart your device to clear any temporary software bugs.  
Ensure that your device software is upgraded to the latest version.  
If the touch screen is scratched or damaged, take it to your local Samsung Service Centre.  
115  
 
Troubleshooting  
Your device freezes or has fatal errors  
If your device freezes or hangs, you may need to close programs or reset the device to regain  
functionality. If your device is frozen and unresponsive, press and hold the Power button for  
8-10 seconds. The device reboots automatically.  
If this does not solve the problem, perform a factory data reset. On the Applications  
screen, tap Settings Backup and reset Factory data reset Reset device Erase  
everything  
.
Calls are being dropped  
When you are in areas with weak signals or poor reception, you may lose your connection to  
the network. Move to another area and try again.  
Outgoing calls are not connected  
Ensure that you have pressed the Dial key.  
Ensure that you have accessed the right cellular network.  
Ensure that you have not set call barring for the phone number you are dialling.  
Incoming calls are not connected  
Ensure that your device is turned on.  
Ensure that you have accessed the right cellular network.  
Ensure that you have not set call barring for the incoming phone number.  
Others cannot hear you speaking on a call  
Ensure that you are not covering the built-in microphone.  
Ensure that the microphone is close to your mouth.  
If using a headset, ensure that it is properly connected.  
116  
Troubleshooting  
Audio quality is poor  
Ensure that you are not blocking the device’s internal antenna.  
When you are in areas with weak signals or poor reception, you may lose reception. Move  
to another area and try again.  
When dialling from contacts, the call is not connected  
Ensure that the correct number is stored in the contact list.  
Re-enter and save the number, if necessary.  
Ensure that you have not set call barring for the contact’s phone number.  
The device beeps and the battery icon is empty  
Your battery is low. Recharge or replace the battery to continue using the device.  
The battery does not charge properly or the device turns off  
The battery terminals may be dirty. Wipe both gold-coloured contacts with a clean, soft  
cloth and try charging the battery again.  
If the battery no longer charges completely, dispose of the old battery properly  
and replace it with a new battery (refer to your local ordinances for proper disposal  
instructions).  
Your device is hot to the touch  
When you use applications that require more power or use applications on your device for an  
extended period of time, your device may feel hot to the touch. This is normal and should not  
affect your device’s lifespan or performance.  
117  
Troubleshooting  
Error messages appear when launching the camera  
Your Samsung device must have sufficient available memory and battery power to operate  
the camera application. If you receive error messages when launching the camera, try the  
following:  
Charge the battery or replace it with a battery that is fully charged.  
Free some memory by transferring files to a computer or deleting files from your device.  
Restart the device. If you are still having trouble with the camera application after trying  
these tips, contact a Samsung Service Centre.  
Error messages appear when launching the FM radio  
The FM radio application on your Samsung device uses the headset cable as an antenna.  
Without a headset connected, the FM radio cannot receive radio stations. To use the FM radio,  
first ensure that the headset is properly connected. Next, scan for and save the available radio  
stations.  
If you still cannot use the FM radio after performing these steps, try accessing your desired  
station with another radio receiver. If you can hear the station with another receiver, your  
device may require service. Contact a Samsung Service Centre.  
Error messages appear when opening music files  
Some music files may not play on your Samsung device for a variety of reasons. If you receive  
error messages when opening music files on your device, try the following:  
Free some memory by transferring files to a computer or deleting files from your device.  
Ensure that the music file is not Digital Rights Management (DRM)-protected. If the file is  
DRM-protected, ensure that you have the appropriate licence or key to play the file.  
Ensure that your device supports the file type.  
118  
Troubleshooting  
Another Bluetooth device is not located  
Ensure that the Bluetooth wireless feature is activated on your device.  
Ensure that the Bluetooth wireless feature is activated on the device you wish to connect  
to, if necessary.  
Ensure that your device and the other Bluetooth device are within the maximum  
Bluetooth range (10 m).  
If the tips above do not solve the problem, contact a Samsung Service Centre.  
A connection is not established when you connect the device to a  
computer  
Ensure that the USB cable you are using is compatible with your device.  
Ensure that you have the proper drivers installed and updated on your computer.  
If you are a Windows XP user, ensure that you have Windows XP Service Pack 3 or higher  
installed on your computer.  
Ensure that you have Samsung Kies 2.0 or Windows Media Player 10 or higher installed  
on your computer.  
A small gap appears around the outside of the device case  
This gap is a necessary manufacturing feature and some minor rocking or vibration of  
parts may occur.  
Over time, friction between parts may cause this gap to expand slightly.  
119  
Some content may differ from your device depending on the region or service provider.  
English. 12/2012. Rev. 1.0  

Toshiba Cell Phone DKA UG CRDLS VC 4016149 User Manual
Sony USM1GEX User Manual
Sony ICF CD2000 User Manual
Sanus Systems NF213 User Manual
Samsung SGH F500 User Manual
Samsung SGH E570 User Manual
Samsung GT C3212 User Manual
Samsung GH68_3XXXXA User Manual
Pioneer DEH 3330R User Manual
Nokia 7380 User Manual