Samsung GH68 07610A User Manual

* Some of the contents of this manual may differ from your phone,  
depending on the software installed or your service provider.  
* Depending on your country, your phone and accessories may  
appear different from the illustrations in this manual.  
SAMSUNG ELECTRONICS  
Printed in Korea  
Code No.:GH68-07610A  
English. 09/2005. Rev. 1.1  
World Wide Web  
SGH-X620  
User’s Guide  
Use road safety at all times  
Do not use a hand-held phone while driving. Park  
the vehicle first.  
Switch off the phone when refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Important  
safety  
Switch off in an aircraft  
Wireless phones can cause interference. Using them  
in an aircraft is both illegal and dangerous.  
precautions  
Switch off the phone near all medical  
equipment  
Failure to comply with the following  
precautions may be dangerous or illegal.  
Hospitals or health care facilities may be using  
equipment that could be sensitive to external radio  
frequency energy. Follow any regulations or rules in  
force.  
 
Interference  
Keep your phone away from small children  
All wireless phones may be subject to interference,  
which could affect their performance.  
Keep the phone and all its parts, including accessories,  
out of the reach of small children.  
Be aware of special regulations  
Accessories and batteries  
Meet any special regulations in force in any area and  
always switch off your phone whenever it is forbidden  
to use it, or when it may cause interference or danger.  
Use only Samsung-approved accessories and  
batteries. Use of any unauthorised accessories could  
damage your phone and may be dangerous.  
Water resistance  
• The phone could explode if the battery is  
replaced with an incorrect type.  
• Dispose of used batteries according to the  
manufacturer’s instructions.  
Your phone is not water-resistant. Keep it dry.  
Sensible use  
Use only in the normal position (held to the ear). Avoid  
unnecessary contact with the antenna when the phone  
is switched on.  
Qualified service  
Only qualified service personnel may repair your  
phone.  
Emergency call  
For more detailed safety information, see "Health and  
safety information" on page 66.  
Key in the emergency number for your present  
location, then press  
[
].  
1
Camera  
Use the camera module on your  
phone to take a photo.  
About this Guide  
This User’s Guide provides you with condensed  
information about how to use your phone. To quickly  
learn the basics for your phone, please refer to “Get  
started” and “ Step outside of the phone.”  
In this guide, the following instruction icons appear:  
Special  
features of your phone  
Indicates that you need to pay careful attention  
to the subsequent information regarding safety or  
phone features.  
IrDA  
Send and receive Phonebook via an  
infrared port.  
Indicates that you can get more information on  
the referenced page.  
Indicates that you need to press the Navigation  
keys to scroll to the specified option and then  
select it.  
WAP browser  
Access the wireless web and access  
various services and up-to-the-  
minute information.  
Indicates a key on the phone. For example,  
[
]
[
]
Indicates a soft key, whose function is displayed  
<
>
on the phone screen. For example, <Menu  
>
2
Simple, compact design with Intenna  
Samsung’s powerful intenna technology allows  
the best call quality without an annoying external  
antenna.  
Java  
Enjoy Java-based embedded  
games and download new games.  
Calendar  
Keep track of your daily, weekly,  
and monthly schedule.  
Multimedia Message Service (MMS)  
Deliver MMS messages with a combination of  
text, images, and audio.  
Voice recorder  
Record memos or sounds.  
FM radio  
Listen to your favourite FM radio  
channels anytime, anywhere.  
Timer and stopwatch  
Count down to a specific event or  
measure the time it takes to do  
your exercise or work.  
3
Browse WAP........................................................ 15  
Use Phonebook .................................................... 15  
Send messages.................................................... 16  
View messages .................................................... 17  
Manage schedule.................................................. 18  
Contents  
Unpack  
6
6
7
Make sure you have each item  
Your phone  
Enter text  
19  
21  
26  
64  
ABC, T9, Number, and Symbolic modes  
Call functions  
Buttons, features, and locations  
Get started  
Advanced calling features  
Menu functions  
First steps to operate your phone  
Install and charge the phone ................................... 7  
Power on or off...................................................... 8  
Keys and display.................................................... 9  
Access menu functions.......................................... 11  
Customise your phone .......................................... 12  
Make/answer calls................................................ 13  
All menu options listed  
Solve problems  
Help and personal needs  
Health and safety information  
66  
73  
Step outside of the phone  
14  
Index  
Begin with your camera, games, and other special features  
Use camera......................................................... 14  
Play games ......................................................... 14  
4
Overview of menu functions  
To access Menu mode, press <Menu> from the idle screen.  
Press <Phonebook> in Idle mode.  
Sound settings  
8 Alerts on call  
5 Messages  
Organiser  
1 Phonebook  
p.26  
1 SIM-AT  
p.30  
p.35  
p.36  
8 Conversion  
9 Timer  
10 Stopwatch  
1 Find name  
2 Add entry  
p.26  
p.27  
p.28  
p.28  
p.28  
p.29  
p.29  
p.29  
p.29  
p.55  
p.55  
p.56  
2 Call records  
p.30  
3 Speed-dial list  
4 Copy all to phone  
5 Delete all  
6 Own number  
7 Group setting  
8 Memory status  
9 Service directory  
1 Missed calls  
2 Received calls  
3 Dialled calls  
4 Delete all  
p.30  
p.31  
p.31  
p.31  
p.31  
p.31  
1 Short messages  
2 Multimedia messages  
3 Push messages  
4 Preset messages  
5 Voice mail  
6 Broadcast  
7 Settings  
p.36  
p.37  
p.40  
p.40  
p.41  
p.41  
p.41  
p.43  
8 Camera  
p.56  
1 Take photos  
2 My photos  
3 My albums  
4 Delete all  
5 Settings  
6 Memory status  
p.56  
p.58  
p.59  
p.59  
p.59  
p.59  
5 Call time  
6 Call costs *  
3 Network services  
p.32  
8 Memory status  
1 Call diverting  
2 Call barring  
3 Call waiting  
4 Network selection  
5 Caller ID  
6 Band selection  
7 Active line *  
p.32  
p.32  
p.33  
p.33  
p.33  
p.34  
p.34  
6 Fun box  
p.44  
9 Phone settings  
p.60  
1 WWW services  
2 Media box  
3 JAVA world  
4 FM radio  
p.44  
p.47  
p.48  
p.49  
1 Display  
2 Greeting message  
3 Language  
4 Security  
5 Auto keypad lock  
6 Auto redial  
p.60  
p.60  
p.60  
p.61  
p.62  
p.62  
p.62  
p.63  
p.63  
p.64  
7 Organiser  
p.50  
4 Sound settings  
p.34  
1 New memo  
2 Calendar  
3 To do list  
4 Clock  
5 Alarm  
6 Voice recorder  
7 Calculator  
p.50  
p.51  
p.52  
p.52  
p.53  
p.53  
p.55  
7 Voiceclarity  
1 Incoming calls  
2 Messages  
3 Power on/off  
4 Connection tone  
5 Key tone  
6 Minute minder  
7 Quiet mode  
p.34  
p.35  
p.35  
p.35  
p.35  
p.35  
p.35  
8 Anykey answer  
9 Infrared activation  
10 Reset settings  
*
Shows only if supported by your SIM  
card.  
5
Unpack  
Your phone  
Make sure you have each item  
Buttons, features, and locations  
Mirror  
Camera  
Phone  
Travel Adapter  
User’s Manual  
Earpiece  
Display  
Ear-microphone  
jack  
Volume keys  
Navigation keys  
(Up/Down/Left/  
Right)  
Battery  
Camera key  
WAP Browser key  
You can obtain various accessories from your local  
Samsung dealer.  
Left soft key  
IrDA port  
Right soft key  
Power On/Off/  
Menu exit key  
Dial/Menu  
confirmation key  
The items supplied with your phone and the  
accessories at your Samsung dealer may vary,  
depending on your country or service provider.  
Alphanumeric  
keys  
Cancel/Back/  
Correction key  
Special  
function keys  
Microphone  
6
         
Get started  
First steps to operate your phone  
Install the battery.  
Plug the travel adapter  
into the phone.  
3
4
SIM card information  
When you subscribe to a cellular network, you receive  
a plug-in SIM (Subscriber Identity Module) card  
loaded with your subscription details, such as your  
PIN, and available optional services.  
Install and charge the phone  
Plug the adapter into a standard AC wall outlet.  
5
6
Remove the battery.  
Insert the SIM card.  
1
2
When the phone is completely charged (the  
battery icon stops blinking), unplug the adapter  
from the power outlet.  
If the phone is already  
on, first turn it off by  
Make sure that the gold-  
coloured contacts on the  
card face down into the  
phone.  
holding [  
].  
7
           
Get started  
Remove the adapter from the phone.  
Power on or off  
7
Power on  
1. Press and hold [  
the phone.  
] to turn on  
2. If necessary, enter the phone  
password and press <OK>.  
Do not turn on  
the phone when  
mobile phone  
3. If necessary, enter the PIN and  
use is prohibited.  
press <OK  
>
Power off  
1. Press and hold [  
].  
Low battery indicator  
When the battery is low:  
Keypad lock  
a warning tone sounds,  
When the phone is locked, the keypad lock feature  
locks the exposed keys so that nothing will happen if  
the keys are accidentally pressed.  
the battery low message displays, and  
the empty battery icon  
blinks.  
If the battery level becomes too low, the phone  
automatically turns off. Recharge your battery.  
To unlock the keypad, press <Unlock> and press  
< >.  
8
       
Keys and display  
Description  
Key(s)  
Ends a call. Hold down to switch the phone  
on and off.  
Key(s) Description  
Perform the function indicated on the bottom  
line of the display.  
In Menu mode, cancels input and returns the  
phone to Idle mode.  
Enter numbers, letters, and some special  
characters.  
In Idle mode, hold [1] down to access your  
voicemail.  
In Idle mode, access menu options directly.  
Up: Camera  
Down: FM radio  
Left: Create in Short messages  
Right: Calendar  
Enter special characters.  
In Menu mode, scroll through the menu  
options.  
In Idle mode, hold  
[
]
down to lock the  
keypad and hold [ ] down to activate or  
deactivate the Quiet mode.  
In Idle mode, launches the Wireless  
Application Protocol (WAP) browser.  
Adjusts the phone volume.  
In Idle mode, adjusts the keypad tone  
volume.  
Sends or answers a call.  
In Idle mode, retrieves the last number  
dialled, missed, or received.  
(on the left)  
In Idle mode, hold down to turn on the  
camera.  
In Capture mode, takes a photo.  
Deletes characters from the display.  
In Menu mode, returns to the previous menu  
level.  
(on the right)  
In Idle mode, enters the New memo menu  
when held down.  
9
     
Get started  
Display  
Layout  
Icons  
(continued)  
New multimedia message  
The display has the three areas.  
Call diverting feature is active  
p. 32  
Icons  
displays various icons.  
IrDA port is active  
p. 63  
Text and graphics  
displays messages,  
instructions, and  
GPRS network  
Home Zone, if you have  
registered for the appropriate  
service  
information you enter.  
Soft key function  
Office Zone, if you have  
registered for the appropriate  
service  
Menu Phonebook  
indicators  
shows the current  
functions assigned to the  
two soft keys.  
Set to vibrate call ringer  
Received signal strength  
Icons  
p. 34  
Call in progress  
Quiet mode is activep. 35  
Out of your service area; you  
cannot send or receive calls  
Battery power level  
Alarm set  
New text message  
New voicemail message  
10  
   
Access menu functions  
Select an  
option  
1. Press the appropriate soft key.  
Use the soft  
keys  
The roles of the soft keys vary  
depending on the function you are  
using. The bottom line of the  
2. Press the Navigation keys to  
move to the next or previous  
option.  
display indicates their current role.  
3. Press <Select> or  
[
]
to  
confirm the function displayed or  
option highlighted.  
Menu  
Phonebook  
4. To exit, choose either of the  
following methods:  
Press  
one level.  
Press  
mode.  
[
]
or [  
C] to move up  
[
]
to return to Idle  
Press the left soft  
key to access  
Menu mode.  
Press the right soft  
key to access the  
Phonebook menu.  
Use shortcuts Press the number key  
corresponding to the option you  
want.  
11  
 
Get started  
Customise your phone  
You can change the colour for the  
display components, such as title  
bars and highlight bars.  
Menu mode  
Skin colour  
1. In Idle mode, press <Menu  
>
Display  
language  
and select Phone settings  
Language Text language  
1. In Idle mode, press <Menu  
>
.
and select Phone settings  
2. Select a language.  
Display  
Skin.  
2. Select a colour pattern.  
1. In Idle mode, press <Menu  
>
Call ringer  
melody  
and select Sound settings  
You can switch the phone to Quite  
mode to avoid disturbing other  
people with your phone sounds.  
Incoming calls  
.
Quiet mode  
2. Select a sound category.  
3. Select a ringer melody.  
Press and hold  
[
]
in Idle mode.  
You can set a wallpaper for the idle  
screen.  
Idle mode  
Wallpaper  
1. In Idle mode, press <Menu  
>
and select Phone settings  
Display  
Wallpaper  
.
2. Select an image category.  
3. Press [Left] or [Right] to select  
an image.  
12  
 
Make/answer calls  
You can protect the phone against  
unauthorised use with a phone  
password.  
Phone lock  
1. Enter an area code and phone  
number.  
2. Press  
3. To end the call, press  
Make a call  
1. In Idle mode, press <Menu  
>
[
].  
and select Phone settings  
[
].  
Security  
password  
2. Enter the default password,  
Change  
.
1. When the phone is ringing,  
press  
2. To end the call, press  
Answer a call  
[
].  
“00000000” and press <OK>.  
[
].  
3. Enter a new 4- to 8- digit  
password and press <OK>.  
Press [  
/
].p. 9  
4. Enter the new password again  
Adjust the  
volume during  
a call  
and press <OK>.  
5. Select Phone lock  
6. Select Enable  
7. Enter the password and press  
OK>.  
.
.
<
13  
 
Play games  
Step outside of the phone  
Begin with your camera, games, and other special  
features  
1. In Idle mode, press <Menu>  
Lauch a game  
and select Fun box  
world Downloads  
SnowBallFight or  
BubbleSmile  
JAVA  
Use camera  
.
1. In Idle mode, press and hold  
Take a photo  
2. Press <Options> and select  
[
] to turn on the camera.  
Launch to launch the game.  
2. Aim the lens at the subject and  
adjust the image.  
1. After loading a game, press any  
key twice.  
Play  
SnowBallFight  
3. Press [ ] to take a photo. The  
photo is saved automatically.  
2. Press [ ].  
4. Press [C] to take another  
photo.  
1. After loading a game, select  
Play  
BubbleSmile  
START GAME  
the game  
1. In Idle mode, press [Up] and  
select My photos  
2. Select a photo you want.  
View a photo  
mode you want.  
.
14  
       
Browse WAP  
Use Phonebook  
Using a built-in WAP (Wireless Access Protocol)  
browser, you can get easy access to the wireless web  
to receive a variety of latest services and information  
and to enjoy download of web contents.  
To the phone’s memory  
Add an entry  
1. In Idle mode, enter a phone  
number and press <Save>.  
2. Select Phone  
a number type.  
In Idle mode, press  
[
].  
Launch the  
browser  
3. Enter a name and press <OK>.  
To the SIM card  
1. In Idle mode, enter a phone  
To scroll through browser items,  
press [Up] or [Down].  
To select an item, press <  
To return to the previous page,  
press <Back> or [ ].  
To return to the home page,  
hold down [ ].  
Navigate the  
web  
number and press <Save>.  
2. Select SIM  
.
>.  
3. Enter a name and press <OK>.  
C
4. Enter a location number and  
press <OK>.  
C
15  
   
Step outside of the phone  
1. In Idle mode, press  
Phonebook> and select Find  
name  
1. In Idle mode, press <Menu  
and select Messages  
Multimedia messages  
Create  
>
Find an entry  
Send a  
<
multimedia  
message  
(MMS)  
.
.
2. Enter a name you want to find.  
3. Select an entry.  
2. Press <Add> on the Subject  
line.  
4. Select a number and press  
[
]
3. Enter the message subject  
to dial, or <Options> to access  
options.  
<OK>.  
4. Press <Add> on the Picture  
line.  
Send messages  
5. Add an image file.  
1. In Idle mode, press <Menu  
>
Send a short  
message (SMS)  
6. Scroll to the Sound line and  
and select Messages  
messages Create  
2. Enter the message text.  
3. Press <Options> and select  
Send  
Short  
press <Add>.  
.
7. Add a sound file.  
8. Scroll to the Message line and  
press <Add>.  
.
9. Enter the message text.  
4. Enter destination numbers.  
10.Press <Opt.> and select Done  
.
5. Press <OK>.  
16  
 
11.Press <Opt.> and select Send  
12.Select an empty location.  
13.Enter a destination.  
.
When a notification appears:  
View a  
multimedia  
message  
1. Press <View>.  
2. Press <Options> and select  
Retrieve. The message  
displays.  
14.Press <Send> to send the  
message.  
From the Inbox:  
View messages  
1. In Idle mode, press <Menu  
and select Messages  
Multimedia messages  
Inbox  
2. Select a message.  
>
When a notification appears:  
View a short  
message  
.
Press <View>. The message  
displays.  
From the Inbox:  
1. Press and hold [  
1] in Idle  
Access a  
voicemail  
1. In Idle mode, press <Menu  
>
Short  
mode.  
and select Messages  
messages Inbox  
2. Select a message.  
2. Follow the instructions from the  
system.  
.
17  
 
Step outside of the phone  
Manage schedule  
1. In Idle mode, press and hold  
].  
Create a new  
memo  
[C  
2. Enter the memo content and  
press <OK>.  
3. Select a memo type.  
4. Select a date.  
5. Enter the time for the memo  
and press <OK>.  
6. Press <Yes> to set an alarm.  
7. Enter the time for the alarm to  
ring and press <OK>.  
8. Select an alarm tone.  
1. In Idle mode, press [Right].  
2. Select a date.  
Access your  
schedule  
3. Press [Left] or [Right] to view  
the schedule for that day.  
18  
 
Using ABC mode  
Press the appropriate key until the character you want  
appears on the screen.  
Enter text  
ABC, T9, Number, and Symbolic modes  
You can enter text for some features such as  
messaging, Phonebook, or Organiser, using ABC  
mode, T9 mode, Number mode, and Symbolic mode.  
Characters in order displayed  
Key  
Upper case  
Lower case  
1
2
3
4
5
6
7
8
9
0
.
,
-
?
!
@
:
1
A
D
G
J
B
C
F
I
2
3
4
5
a
d
g
j
b
e
h
k
c
f
i
2
Changing the text input mode  
The text input mode indicator displays when the  
cursor is in a text field.  
E
H
K
N
Q
U
3
4
5
L
l
Press and hold the right soft key to switch T9 and  
ABC modes.  
Press [ ] to shift case or hold down [ ] to switch  
to Number mode.  
M
P
T
O
6
m
p
t
n
o
6
R
V
Y
S
8
7
9
q
r
s
7
u
v
8
Press and hold [ ] to switch to Symbol mode.  
W X  
0
Z
w
x
y
z
9
Example: Entering a name in Phonebook  
Enter name  
Tips for using ABC mode  
To enter the same letter twice or to enter a  
different letter on the same key, wait for the cursor  
to move to the right automatically or press [Right].  
Then, enter the next letter.  
Text input mode  
indicator  
20  
Ok  
Eng  
19  
         
Enter text  
Press [ ] to insert a space.  
3. When the word displays correctly, go to step 4.  
Otherwise, press [ ] to display alternative word  
choices for the keys that you have pressed.  
For example, OF and ME use [ ] and [ ].  
0
Press [ ] to change case. Lower case (No  
indicator), Initial capital ( ), and Capital lock  
(
) are available.  
Press [Left] or [Right] to move the cursor.  
Press [ ] to delete characters one by one. Press  
and hold [ ] to clear the display.  
6
3
4. Press [ ] to insert a space and enter the next  
word.  
C
C
Tips for using T9 mode  
Press [  
automatically.  
Press to change case. Lower case (No  
indicator), Initial capital ( ), and Capital lock  
) are available.  
Press [Left] or [Right] to move the cursor.  
Press [ ] to delete characters one by one. Press  
and hold [ ] to clear the display.  
1] to enter periods or apostrophes  
Using T9 mode  
T9 is a predictive text input mode that allows you to  
key in any character using single keystrokes.  
[
]
(
Entering a word in T9 mode  
1. Press [  
each key once for each letter.  
For example, press [ ], [ ], [  
enter HELLO in T9 mode.  
2] to [9] to start entering a word. Press  
C
C
4
3
5], [5], and [6] to  
Adding a new word to the T9 dictionary  
This feature may not be available for some languages.  
1. Enter the word that you want to add.  
T9 predicts the word that you are typing, and it  
may change with each key that you press.  
2. Enter the whole word before editing or deleting  
characters.  
2. Press [0] to display alternative words for your key  
presses. When there are no more alternative  
words, Spell appears on the bottom line.  
20  
3. Press <Spell>.  
Call functions  
4. Enter the word you want using ABC mode and  
press <OK>.  
Advanced calling features  
Using Number mode  
Making a call  
1. In Idle mode, enter the area code and phone  
number.  
Number mode enables you to enter numbers.  
Press the keys corresponding to the digits you want.  
2. Press  
[
].  
Using Symbol mode  
Press [C] to clear the last digit or press and hold [C]  
to clear the whole display. You can move the cursor  
to edit an incorrect digit.  
Symbol mode enables you to insert symbols.  
To  
Press  
Making an international call  
display more symbols  
select a symbol  
[Up] or [Down].  
1. In Idle mode, press and hold  
appears.  
[0]. The  
+
character  
the corresponding  
number key.  
2. Enter the country code, area code, and phone  
number, then press  
[
].  
clear the symbol(s)  
insert the symbol(s)  
[
C
].  
Redialling recent numbers  
<
OK>.  
1. In Idle mode, press  
recent numbers.  
[
]
to display the list of  
2. Scroll to the number you want and press  
[
].  
21  
       
Call functions  
Making a call from Phonebook  
Tips for answering a call  
When Anykey answer in the Phone settings  
menu is active, you can press any key to answer a  
Once you have stored a number in Phonebook, you  
can dial the number by selecting it from  
call, except for  
Press to reject a call.  
Press and hold [ ] (p. 9) to mute the ringer.  
[
].p. 63  
Phonebook.p. 26  
[
]
You can also use the speed dial feature to assign your  
most frequently called numbers to specific number  
/
keys.  
p. 28  
Viewing missed calls  
Dialling a number from the SIM card  
If you have missed calls, the screen displays how  
many calls you have missed.  
1. In Idle mode, enter the location number for the  
phone number you want and press [ ].  
1. Press <Missed>.  
2. Press [Up] or [Down] to scroll through other  
numbers.  
2. If necessary, scroll through the missed calls.  
3. Press <Dial> or  
[
]
to dial the number you want.  
3. Press  
[
]
to dial the number you want.  
Ending a call  
Using the headset  
Close the phone or press  
[
].  
Use the headset to make or answer calls without  
holding the phone.  
Answering a call  
When you receive an incoming call, the phone rings  
and displays the incoming call image.  
Connect the headset to the jack on the right side of  
the phone.  
Press  
[
]
or <Accept> to answer the call.  
22  
     
The buttons on the headset work as listed below:  
4. Press <Options> and select End held call to end  
the call on hold.  
To  
Press  
5. To end the current call, press  
[
].  
redial the last call  
answer a call  
end a call  
the button twice.  
and hold the button.  
and hold the button.  
Answering a second call  
You can answer an incoming call while already on the  
phone, if your network supports it and you have  
activated the call waiting feature.  
p. 33  
Options during a call  
1. Press to answer the call. The first call is  
[
]
automatically put on hold.  
You can access a number of functions during a call.  
2. Press <Options> and select Swap to switch  
Adjusting the volume during a call  
between the calls.  
Use [ / ] to adjust the earpiece volume during a call.  
3. Press <Options> and select End held call to end  
the call on hold.  
Press [ ] to increase the volume level and [ ] to  
decrease the volume level.  
p. 9  
4. To end the current call, press  
[
].  
Making a second call  
You can make another call if your network supports it.  
Transferring a call  
You can transfer the current call to the call on hold if  
this service is supported by the network, so that  
disconnected from both of them.  
1. Press <Options> and select Hold to put the call  
on hold.  
2. Make the second call in the normal way.  
Press <Options> and select Transfer  
.
3. Press <Options> and select Swap to switch  
between the calls.  
23  
     
Call functions  
Using the loudspeaker  
Muting or sending key tones  
You can talk and listen with the phone a short distance  
away without holding the phone to your ear.  
You can turn the key tones off or on.  
Press <Options> and select Mute keys or Send  
Press <Options> and select Speaker on or Normal  
.
keys.  
To communicate with answering machines or  
computerised telephone systems, Send keys must  
be selected.  
Using the voice clarity feature  
This feature increases the microphone’s sensitivity so  
that the person with when you are speaking can hear  
you clearly even though you may be whispering.  
Searching for a number in Phonebook  
You can access the Phonebook menu to locate or  
Press <Options> and select Voiceclarity on or  
Voiceclarity off  
.
store entries.p. 26  
Press <Options> and select Phonebook  
.
Placing a call on hold/Retrieving  
Press <Options> and select Hold, or press  
Sending a sequence of DTMF tones  
Dual tone multi-frequency (DTMF) tones are the tones  
used in phones for tone dialling.  
<Retrieve> to place the call on hold or retrieve the  
call.  
Switching off the microphone (Mute mode)  
You can temporarily switch off your phone’s  
microphone so that the person on the phone cannot  
hear you.  
You can send DTMF tones as a group after entering the  
entire number you need to send or retrieving a  
number from Phonebook. This feature is helpful for  
entering a password or an account number when you  
call an automated system, like a banking service.  
Press <Options> and select Mute or Unmute  
.
24  
             
1. When connected with a teleservice system, press  
Options> and select Send DTMF  
2. Enter the number you need to send and press  
OK>.  
Making a multi-party call  
Use this feature to allow as many as six people to join  
a multi-party call, or conference call.  
<
.
<
Your service provider must support multi-party calls  
for you to use this feature.  
Using the message service  
You can access the Messages menu to read an  
Setting up a multi-party call  
1. Call the first participant.  
incoming message and send a new message.  
p. 36  
2. Call the second participant. The first call is  
automatically put on hold.  
Press <Options> and select Message  
.
Recording the conversation  
3. Press <Options> and select Join. The first  
participant is added to the multi-party call.  
You can record your conversation during a call. You  
can find conversation you have recorded on the  
Voices menu (Memo 7.6.2).  
4. If desired, call another person or answer an  
incoming call.  
5. Press <Options> and select Join  
.
Press <Options> and select Conv. record  
.
6. Repeat steps 4 and 5 as desired.  
Using the SIM-AT(SIM Application Toolkit)  
This menu is available if you use a SIM card in your  
phone. A SIM card provides services such as news,  
weather, sports, entertainment, and location services.  
For details, see your SIM card instructions or contact  
your service provider.  
25  
   
Having a private conversation with one  
participant  
Menu functions  
1. Press <Options> and select Split  
.
All menu options listed  
2. Select a name or number from the participant list.  
Phonebook  
You can talk privately with that person, while the  
other participants converse with each other.  
You can store phone numbers on your SIM card and in  
your phone’s memory. The SIM card and phone’s  
memory are physically separate, but they are used as  
a single entity called Phonebook.  
3. To return to the multi-party call, press <Options  
>
and select Join  
.
Dropping one participant  
You can manage your Phonebook entries and access  
the service directory in the Phonebook menu  
1. Press <Options> and select Remove  
.
2. Select a name or number from the participant list.  
To access this menu, press <Phonebook> in Idle  
mode.  
The participant is dropped from the call, but the  
call continues with the other parties.  
3. Close the phone or press  
party call.  
[
]
to end the multi-  
Find name (Phonebook 1)  
Use this menu to search for numbers in Phonebook.  
Press <Phonebook> in Idle mode to quickly access  
this menu.  
Finding an entry  
1. Enter the first few letters of the name that you  
want to find.  
26  
           
2. Select the name you want from the list.  
3. Press to dial the number, or <Options> to  
1. Select an entry and scroll to a category. The  
following options are available:  
[
]
Mobile  
number in any category.  
/Home/Office/Fax/Other: add a  
access Phonebook options.  
Using Phonebook entry options  
E-Mail: assign an e-mail address.  
While viewing an entry in Phonebook, press  
Note: add a memo about the person.  
Group: assign the number to a caller group.  
Graphic: assign an image as a caller ID image  
to alert you to a call from the number.  
Alert: assign a unique ringer melody to alert  
you to a call from the number.  
<Options> to access the following options:  
Depending on the category you selected, available  
options vary.  
Edit number: edit the selected number.  
Change name: change the assigned name.  
Send message: send an SMS.  
2. Press <Options> or <Edit> to change  
information.  
Copy: copy the number to the phone’s memory or  
SIM card.  
Add entry (Phonebook 2)  
Send via infrared: send the entry via infrared  
port.  
Use this menu to add a new entry to Phonebook.  
Storing a number in the phone’s memory  
1. Enter a phone number and press <Save>.  
Delete entry: delete the entry.  
Editing entry information in the phone’s  
memory  
2. Select Phone  
.
3. Select a phone number type.  
27  
         
Menu functions  
4. Enter a name and press <OK>.  
Managing speed dial entries  
While viewing the Speed dial screen, press <Select  
to access the following options:  
>
Storing a number on the SIM card  
1. Enter a phone number and press <Save>.  
Edit number: assign a number to an unassigned  
key.  
2. Select SIM  
.
3. Enter a name and press <OK>.  
4. If necessary, change a location number.  
5. Press <OK> to save the contact.  
Change name: assign a different name to an  
assigned key.  
Delete: clear a speed dial setting.  
Dialling speed dial entries  
Speed-dial list (Phonebook 3)  
Press and hold the appropriate key in Idle mode.  
Use this menu to assign speed dial numbers (2 to 9)  
for eight of your most frequently called numbers.  
Copy all to phone (Phonebook 4)  
Assigning speed dial entries  
Use this menu to copy all of the numbers stored in the  
SIM card to the phone’s memory.  
1. Select a key location from  
for your voice mail server.  
2
to  
9. Key  
1
is reserved  
2. Select Edit number  
Delete all (Phonebook 5)  
3. Enter a phone number.  
Use this menu to delete entries stored in the SIM card  
or in the phone’s memory. You can also delete all  
entries at one time.  
If necessary, press <Phonebook> to select a  
entry from the Phonebook list.  
4. Press <OK>.  
28  
       
View image: view an image to be displayed when  
a call comes in from a member of the group.  
Own number (Phonebook 6)  
Use this feature to check your phone numbers, or to  
assign a name to each of the numbers.  
Memory status (Phonebook 8)  
Changes made here do not affect the actual subscriber  
numbers on your SIM card.  
Use this menu to check the number of entries you  
have saved and the total number of entries you can  
save in the phone’s memory and on the SIM card.  
In each location, the following options are available:  
Edit number: enter your phone number.  
Service directory (Phonebook 9)  
Change name: enter a name for the number.  
Delete: delete the assigned number and name.  
This menu is available if your SIM card supports  
Service Dialling Numbers (SDN). Use this menu to  
view the list of SDNs assigned by your service  
provider, including emergency numbers, directory  
enquiries, and voice mail numbers.  
Group setting (Phonebook 7)  
Use this menu to change the properties of caller  
groups.  
Scroll to the number you want and press <Dial> or  
[
From each caller group, the following options are  
available:  
].  
Melody: select a ringer melody to alert you when  
a call comes in from a member of the group.  
Change name: change the group name.  
29  
         
Menu functions  
Accessing a call record  
1. Press [Up] or [Down] to scroll through the call list.  
SIM-AT (SIM Application Toolkit)  
(Menu 1)  
2. Press  
[
]
to dial a number, or <Select> to view  
This menu is available if you use a SIM-AT card that  
provides additional services, such as news, weather,  
sports, entertainment, and location services. Available  
services may vary, depending on your service  
provider’s plans.  
the details of a call.  
Using call record options  
While viewing the call details, press <Options> to  
access the following options:  
For details, see your SIM card instructions or contact  
your service provider.  
Details: access information about the selected call  
record.  
Call back: call the selected number.  
Call records (Menu 2)  
Use this menu to view the calls you have dialled,  
received, or missed, the length of your calls, and the  
cost of your calls.  
Send message: send a message to the selected  
number.  
Edit: allow to edit and save the selected number in  
phonebook.  
To access this menu, press <Menu> in Idle mode and  
Delete: delete the selected call record.  
select Call records  
.
Delete all: delete all call records.  
Missed calls (Menu 2.1)  
This menu displays the 20 most recently received calls  
that you did not answer.  
30  
       
Total received: check the total length of all the  
you have calls received.  
Received calls (Menu 2.2)  
This menu displays the 20 most recent calls you have  
received.  
Reset timers: reset the call timers. You need to  
enter the phone password.  
Dialled calls (Menu 2.3)  
The password is preset to 00000000. You can  
change this password.p. 61  
This menu displays the 20 most recent calls you have  
dialled.  
Call costs (Menu 2.6)  
Delete all (Menu 2.4)  
This network feature displays the cost of calls. This  
menu is available only if your SIM card supports this  
feature. Note that this is not intended to be used for  
billing purposes.  
Use this menu to delete all of the records in each call  
type.  
1. Press <Select> to check the call type(s) to clear.  
2. Press <OK>.  
Last call cost: check the cost of your last call.  
Total cost: check the total cost of all of your calls.  
If the total cost exceeds the maximum cost set in  
Set max cost, you must reset the counter before  
you can make another call.  
3. Press <Yes> to confirm the deletion.  
Call time (Menu 2.5)  
This menu displays the time log for calls made and  
received. The actual time invoiced by your service  
provider will vary.  
Max cost: check the maximum cost limit set in  
Set max cost  
.
Reset counters: reset the cost counters. You  
need to enter your PIN2.  
Last call time: check the length of your last call.  
Total sent: check the total length of all the calls  
you have dialled.  
31  
       
Menu functions  
Set max cost: set the maximum cost authorised  
for your calls. You need to enter your PIN2.  
Cancel all: cancel all call diverting options.  
2. Select the type of calls to be diverted.  
3. To activate call diverting, press <Activate>.  
Otherwise, press <Remove>.  
Price/Unit: set the price per unit that is applied  
when the cost of your calls is calculated. You need  
to enter your PIN2.  
4. Enter the number to which calls are to be diverted  
and press <OK>.  
Network services (Menu 3)  
Use this menu to access network services. Please  
contact your service provider to check their availability  
and subscribe to them, if you wish.  
5. If you selected No reply, select the length of time  
the network delays before diverting a call and  
press <Select>.  
Call barring (Menu 3.2)  
Call diverting (Menu 3.1)  
This network service allows you to restrict your calls.  
1. Select a call barring option:  
This network service reroutes incoming calls to a  
phone number that you specify.  
All outgoing: prohibit all outgoing calls.  
International: prohibit international calls.  
International except to home: only allow  
calls to numbers within the current country  
when you are abroad, and to your home  
country, defined as where your home network  
provider is located.  
1. Select a call diverting option:  
Divert always: divert all calls.  
Busy: divert calls when you are on another  
call.  
No reply: divert calls when you do not answer  
the phone.  
Unreachable: divert calls when you are not in  
an area covered by your service provider or  
when your phone is switched off.  
All incoming: prohibit incoming calls.  
32  
       
Incoming while abroad: prohibit incoming  
calls when you use your phone outside of your  
home country.  
Cancel all: cancel all call barring settings,  
allowing to be sent and received normally.  
Change barring password: change the call  
barring password obtained from your service  
provider.  
Network selection (Menu 3.4)  
This network service allows you to either automatically  
or manually select the network used when roaming  
outside of your home area.  
You can select a network other than your home  
network only if there is a valid roaming agreement  
between the two.  
Automatic: connect to the first available network  
when roaming.  
2. Select the type of calls to be barred.  
3. Press <Activate>. To deactivate call barring,  
Manual: select the network you want.  
press <Deactivate>.  
4. Enter the call barring password supplied by your  
Caller ID (Menu 3.5)  
service provider and press <OK>.  
This network service allows you to prevent your phone  
number from being displayed on the phone of the  
person being called. However, some networks do not  
allow the user to change this setting.  
Call waiting (Menu 3.3)  
This network service informs you when someone is  
trying to reach you while you are on another call.  
Default: use the default setting provided by the  
network.  
1. Select the type of calls to which the call waiting  
option will apply.  
Hide number: ensure your number does not  
display on the other person’s phone.  
2. Press <Activate>. To deactivate call waiting,  
press <Deactivate>.  
Send number: send your number each time you  
make a call.  
33  
             
Menu functions  
Band selection (Menu 3.6)  
Sound settings (Menu 4)  
For the phone to make and receive phone calls, it  
must register with an available network. Your phone  
can handle any of the following types of networks:  
Combined GSM 900/1800, GSM 1900, and Triple band.  
Use this menu to customise various sound settings.  
Incoming calls (Menu 4.1)  
Use this menu to select a volume level and alert type  
for incoming calls.  
The country where you purchased your phone  
determines the default band that it uses. When you  
travel abroad, you must remember to change to an  
appropriate band.  
Default melodies: select a ring tone for the call  
ringer from the default melodies.  
My sounds: select a ring tone for the call from  
melodies received in messages, downloaded from  
wireless web, or imported via Samsung PC Studio  
PC software.  
When you select a new band, your phone  
automatically searches for all available networks. Your  
phone registers with a preferred network within the  
band.  
Ring volume: select a ringer volume.  
Alert type: specify how you are to be informed of  
incoming calls.  
Active line (Menu 3.7)  
Some SIM cards may be used with two subscriber  
numbers. If your SIM card supports it, use this menu  
to select the line that is used to make calls. Calls can  
be answered on both lines, regardless of the selected  
line.  
Melody: the phone rings using the selected ring  
tone.  
Vibration: the phone vibrates but not rings.  
Vibration then melody: the phone vibrates three  
times and then starts ringing.  
34  
           
Messages (Menu 4.2)  
Minute minder (Menu 4.6)  
Use this menu to set up the ringer for incoming SMS  
messages or MMS messages.  
Use this menu to set the phone to beep every minute  
during an outgoing call to keep you informed of the  
length of your call.  
Tone: select one of several message tones.  
Alert type: specify how you are informed of any  
incoming messages.  
Quiet mode (Menu 4.7)  
Use this menu to set how the phone acts to alert you  
to a specific event in Quiet mode, instead of making  
sounds.  
Repetition: specify how often the phone informs  
you of a new message.  
Power on/off (Menu 4.3)  
Vibration: set the phone to vibrate.  
Mute: mute all sound settings.  
Use this menu to turn on or off the melody that the  
phone sounds when it is switched on or off.  
Alerts on call (Menu 4.8)  
Connection tone (Menu 4.4)  
Use this menu to set the phone to beep when you  
receive a new message or when the time for an alarm  
comes during a call.  
Use this menu to set the phone to beep when it is  
connected to the system.  
Key tone (Menu 4.5)  
Use this menu to select the tone that the phone  
sounds when you press a key.  
You can adjust the keypad tone volume using  
in Idle mode.  
[
/
]
35  
                     
Menu functions  
2. Press <Options> to access the following options:  
Messages (Menu 5)  
Send: send the message.  
Use the Messages menu to send and receive short  
messages or multimedia messages. You can also use  
WAP push message, Voice mail, and Cell broadcast  
message features.  
Text: change the text attributes.  
Add media: add a picture, animated image, or  
a melody to the message.  
Preset messages: retrieve a text template.  
Save message: save the message in the  
Outbox.  
To access this menu, press <Menu> in Idle mode and  
select Messages  
.
3. When you finish, press <Options> and select  
Send  
Short messages (Menu 5.1)  
.
Short Message Service (SMS) allows you to send or  
receive text messages including pictures, audio clips,  
and animated images.  
4. Enter a destination number and Press <OK> to  
send the message.  
5. To send the message to more than one recipient,  
press [Down] and fill in additional destination  
fields.  
The maximum number of characters allowed in a  
short message varies by service provider. If your  
message exceeds the maximum number of  
characters, the phone will split the message.  
6. Press <Send>.  
Inbox (Menu 5.1.2)  
Create (Menu 5.1.1)  
You can view received text messages in this menu.  
You can create and send a text message.  
1. Enter your message.  
While viewing a message, press <Options> to access  
the following options:  
Use of Uni-code character, such as ‘â, will reduce  
the maximum number of characters in a message  
to about half.  
Delete: delete the message.  
36  
Message reply: reply to the sender.  
               
Call back: call the sender.  
Delete all (Menu 5.1.4)  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Use this menu to delete all of your messages in each  
message box.  
Send: forward the message.  
1. Press <Select> to check the message boxes to be  
cleared.  
Edit: edit the message.  
2. Press <OK>.  
Extract media: extract media items from the  
message to your phone’s memory.  
3. Press <Yes> to confirm the deletion.  
Transfer: move the message between the SIM  
card and the phone’s memory.  
Multimedia messages (Menu 5.2)  
Multimedia Message Service (MMS) delivers messages  
containing a combination of text, image, voice, and  
sound from phone to phone or from phone to e-mail.  
Outbox (Menu 5.1.3)  
You can view sent or saved text messages.  
While viewing a message, press <Options> to access  
the following options:  
Create (Menu 5.2.1)  
You can create and send an MMS message.  
1. Press <Add> on the Subject line.  
2. Enter a message subject and press <OK>.  
3. Move to the Picture line and press <Add>.  
Delete: delete the message.  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Send: send or resend the message.  
4. Select Create new and take a new photo, or  
select an image category and select an image  
item.  
Edit: edit the message.  
Transfer: move the message between the SIM  
card and the phone’s memory.  
5. Move to the Sound line and press <Add>.  
37  
         
Menu functions  
6. Select Record new and record a new sound, or  
11.When you have finished, press <Opt.> and select  
Send  
select a sound category and select a sound clip.  
.
7. Move to the Message line and press <Add>.  
12.Select a destination field and enter a phone  
number or e-mail address.  
8. Enter the message text.  
To send the message to more than one recipient,  
press [Down] and fill in additional destination  
fields.  
9. Press <Opt.> and select Done  
.
10.Press <Opt.> to access the following options:  
Preview: display the message you have  
created.  
13.Press <Send>.  
Inbox (Menu 5.2.2)  
Send: forward the message.  
Add page: add pages. Move to each page by  
pressing [Left] or [Right] on the message  
screen.  
This menu displays MMS messages that you have  
received. The following icons tell you the message  
status:  
Page timing: specify how long a page  
displays. After the specified time, the display  
automatically scrolls to the next page.  
Text effect: format the text colour, size, or  
style.  
Clear subject/picture/sound/message:  
clear the subject, images, sound, or text.  
Delete page: delete an added page.  
Save message: save the message in the  
has been read  
has not been read  
is being retrieved from the server  
Notification that you have read  
Notification that you have not read  
While viewing a message, press <Opt.> to access the  
following options:  
Delete: delete the message.  
Replay: replay the message.  
Draft or My folder box.  
38  
       
Reply: send a reply to the sender.  
sent  
Reply all: send a reply to the sender and all of the  
recipients in the To and Cc field.  
retry sending  
your phone couldn’t send  
opened by the recipient  
Forward: forward the message to another person.  
If the message contains media purchased on the  
Internet, forwarding is not available.  
While viewing a message, press <Opt.> to access the  
following options:  
Call back: call the sender.  
Delete: delete the message.  
Cut media: save media items from the message  
to your phone’s memory.  
Replay: replay the message.  
Send: send or resend the message.  
Properties: view the message properties.  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Move to My folder: move the message to the My  
folder box.  
Properties: view the message properties.  
Move to My folder: move the message to the My  
folder box.  
Draft (Menu 5.2.4)  
After creating a multimedia message, you can store it  
in this message box for sending later. Messages  
interrupted while created are also saved in this  
message box.  
When you select a notification, you can access  
Retrieve to retrieve the message from the MMS  
server.  
Outbox (Menu 5.2.3)  
While viewing a message, press <Opt.> to access the  
following options:  
This menu displays MMS messages that you have  
sent. The following icons tell you the message status:  
Send: send the message.  
currently being sent  
Replay: replay the message.  
39  
 
Menu functions  
Delete: delete the message.  
3. Press <Yes> to confirm the deletion.  
Properties: view the message properties.  
Push messages (Menu 5.3)  
My folder (Menu 5.2.5)  
Use this menu to access messages from the WAP  
server.  
In this menu, you access messages you have moved  
from Inbox or Outbox, or you have saved while  
creating. While viewing a message, press <Opt.> to  
access the following options:  
Inbox: view push messages you have received.  
Setting: determine whether or not your phone  
receives push messages.  
Delete: delete the message.  
Replay: replay the message.  
Send: send or resend the message.  
Always: the phone receives push messages.  
Never: the phone rejects push messages.  
Optional: the phone receives push messages from  
the service centre set in this option.  
Cut media: save media items from the message  
to your phone’s memory.  
Delete all: delete all of push messages.  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Preset messages (Menu 5.4)  
Properties: view the message properties.  
Use this menu to preset a maximum of 10 frequently  
used messages.  
Delete all (Menu 5.2.6)  
Use this menu to delete all of the messages in each  
message box.  
1. Select an empty location.  
2. Enter the message and press <OK>.  
1. Press <Select> to check the message boxes to be  
cleared.  
2. Press <OK>.  
40  
   
Read: open received messages.  
Voice mail (Menu 5.5)  
The Temporary box saves network messages until  
the phone is switched off. Press <Options> and  
select Save when a text notification appears to  
save to the Archive box.  
Use this menu to store the number of the voice mail  
server and access your voice mails.  
You must enter the voice server number before you  
can access your voice mails. Your service provider  
can give the voice server number.  
The Archive box saves network messages  
indefinitely.  
Receive: enable or disable the reception of  
broadcast messages.  
Connect to voice mail: connect to the voice  
server to allow you to listen to your messages. You  
can also connect to the voice mail server by  
Channel: specify the channels from which you  
receive broadcast messages.  
pressing and holding [1] in Idle mode.  
Voice server number: change or delete the voice  
mail server name and number.  
Language: select the language in which broadcast  
messages display.  
Please contact your service provider for details.  
Broadcast (Menu 5.6)  
The Cell Broadcast service delivers short messages on  
various topics such as the weather or traffic.  
Settings (Menu 5.7)  
Use this menu to set up various options for using  
messaging service.  
Use this menu to change the settings for the service  
and to access broadcast messages.  
Short messages (Menu 5.7.1)  
You can configure default SMS settings for sending or  
receiving messages.  
41  
         
Menu functions  
Service centre: store or change the number of  
your message centre.  
Priority: set the priority level of your messages.  
Validity period: set the length of time your  
Validity period: set the length of time your  
messages are stored in the SMS centre while  
attempts are made to deliver them.  
messages are stored in the message centre.  
Delivery after: set a time delay before messages  
are sent.  
Message type: set the default message type.  
Address hiding: set your address to be hidden  
from the recipient’s phone.  
Reply path: allow the recipient to reply to you  
through your message centre.  
Delivery report: set the network to inform you  
Delivery report: set the network to inform you  
when your message has been delivered.  
when your message has been delivered.  
Read reply: determine whether or not the phone  
sends a read-reply request.  
Character support: select a character encoding  
type. If you select Automatic, the phone switches  
the encoding type from GSM-alphabet to Uni-  
code if you enter a Uni-code character. Use of  
Uni-code encoding will reduce the maximum  
number of characters in a message to about half.  
Receive settings: set up the following options for  
receiving a multimedia message.  
Msg. reception: set how you receive a message.  
Anonymous reject: reject messages from  
anonymous senders.  
Multimedia messages (Menu 5.7.2)  
Adverts reject: reject advertisements.  
You can configure default MMS settings for sending or  
receiving messages.  
Report allowed: send a delivery report from the  
network to the sender.  
Send settings: set up the following options for  
sending a multimedia message:  
42  
   
MMS profiles: configure required network  
settings for MMS.  
DNS2: (when Proxy use is set to Disable)  
enter the secondary DNS address.  
APN: enter the access point name of the GPRS  
network gateway.  
Check with your service provider before you  
change any MMS settings on your phone.  
Login ID: enter the User ID.  
Current profile: select a profile.  
Password: enter the password.  
Profile setting: customise the following options  
for each profile:  
Memory status (Menu 5.8)  
Profile name: assign a name to the MMS  
profile.  
Server URL: enter the address of your MMS  
server.  
Proxy use: connect to the GPRS network using  
the proxy server.  
GPRS setting: customise the settings required  
for connecting to the GPRS network.  
You can view the number of short messages in the  
both SIM card and phone’s memory.  
You can check the total amount of memory for  
Camera, Media box, and Multimedia message and the  
amount of memory currently in use for multimedia  
messages.  
IP address: (when Proxy use is set to  
Enable) enter the gateway address.  
IP port: (when Proxy use is set to Enable  
)
enter the port number.  
DNS1: (when Proxy use is set to Disable  
)
enter the primary DNS address.  
43  
 
Menu functions  
Navigating with the WAP browser  
Fun box (Menu 6)  
To  
Press  
The Fun box menu allows you to use the WAP  
browser, play Java games, and access images and  
sounds stored in the phone’s memory.  
scroll through browser items  
select a browser item  
return to the previous page  
return to the homepage  
[Up] or [Down].  
<
<
>.  
To access this menu, press <Menu> in Idle mode and  
select Fun box  
.
> or [C].  
[ ] and select  
Home  
WWW services (Menu 6.1)  
.
The Wireless Application Protocol (WAP) browser on  
your phone allows you to access the wireless web.  
Using the WAP browser, you can access updated  
information and a wide variety of media content, such  
as wallpapers and ring tones.  
Selecting and using browser menu options  
1. Press <Menu> and select Browser Menu. Or  
select the  
on the top of the screen.  
2. Select one of the following browser options:  
Home (Menu 6.1.1)  
Back: go back to the previous page.  
Home: go back to the homepage.  
Exit: exit the WAP browser.  
Reload: reload the current page.  
Show URL: display the URL address of the  
current web page. You can also set the current  
page as the homepage for the WAP browser.  
About...: view version information for your  
WAP browser.  
Use this menu to connect your phone to the network  
and load the homepage of the wireless web service  
provider. You can also press [  
] in Idle mode.  
44  
     
Using WAP page options  
Adding a bookmark  
1. Select an empty location.  
From any WAP page, press [ ] to access the following  
options:  
2. Enter a URL address for the bookmark and press  
<
OK>.  
Goto URL: enter a URL address manually.  
3. Enter a name for the bookmark.  
Bookmark: switch to the Bookmark menu.  
Menu 6.1.2  
4. Press <OK> to save the bookmark.  
Messages: check the Inbox and Outbox boxes in  
the Short messages menu. You can also create  
Using bookmark options  
After saving an item, press <Select> to access the  
following options:  
and send a new SMS message.p. 36  
Media box: switch to the Media box menu.  
p.  
Go: access the bookmarked page.  
47  
Edit: edit the address and name of the bookmark.  
Delete: delete the bookmark.  
Exiting the WAP browser  
Press to exit the browser.  
Bookmark (Menu 6.1.2)  
[
]
Go to URL (Menu 6.1.3)  
Use this menu to manually enter the URL address of a  
website and access the website.  
Use this menu to save URL addresses to quickly access  
a website.  
Clear cache (Menu 6.1.4)  
Use this menu to clear the cache, which is the  
temporary memory that stores the web pages you  
have recently accessed.  
45  
   
Menu functions  
IP address: (when Proxy use is set to Enable  
enter the gateway address.  
)
Proxy settings (Menu 6.1.5)  
Use this menu to set up proxy servers the phone uses  
to launch the WAP browser. Your service provider can  
tell you if your network requires a proxy server, and  
they can give you the appropriate settings. Contact  
your service provider for details about your settings  
options.  
IP port: (when Proxy use is set to Enable) enter  
the port number.  
DNS1: (when Proxy use is set to Disable) enter  
the primary DNS address.  
DNS2: (when Proxy use is set to Disable) enter  
For each proxy server, the following options are  
available:  
the secondary DNS address.  
APN: enter the access point name of the GPRS  
network gateway.  
Check with your service provider before you change  
any settings on your phone.  
Login ID: enter the User ID.  
Password: enter the password.  
Profile name: assign a name to the HTTP proxy  
GSM setting: customise the following GSM  
network settings:  
server.  
Home URL: set the address of your homepage.  
IP address: (when Proxy use is set to Enable  
enter the gateway address.  
)
Bearer: select a bearer for each type of network  
address accessed.  
IP port: (when Proxy use is set to Enable) enter  
the port number.  
Proxy use: connect to the GPRS network using  
the proxy server.  
DNS1: (when Proxy use is set to Disable) enter  
the primary DNS address.  
GPRS setting: customise the following GPRS  
network settings:  
46  
 
DNS2: (when Proxy use is set to Disable) enter  
the secondary DNS address.  
While accessing an image, press <Options> to access  
the following options:  
Dial Number: enter the PPP server phone  
number.  
Send: send the image by MMS.  
Rename: change the name of the image.  
Delete: delete the image.  
Login ID: enter the user ID.  
Password: enter the password.  
Data call type: select a data call type.  
Set as wallpaper: set the image as your  
wallpaper for the idle screen.  
Properties: view the properties of the image.  
Current proxy (Menu 6.1.6)  
Sounds (Menu 6.2.3)  
Use this menu to activate one of the proxy servers you  
have set up.  
This menu displays sounds recorded, downloaded from  
the wireless web, or received in messages.  
Media box (Menu 6.2)  
While accessing a sound, press <Options> to access  
the following options:  
The Media box menu allows you to access images,  
voice memos, and sounds stored in the phone’s  
memory.  
Send: send the sound by MMS.  
Rename: change the name of the sound.  
Delete: delete the sound.  
Photos (Menu 6.2.1)  
Use this menu to access photos you have taken using  
Set as ringtone: set the sound as your ring tone.  
Properties: view the properties of the sound.  
your camera.p. 58  
Downloaded images (Menu 6.2.2)  
This menu displays images downloaded from the  
wireless web or received in messages.  
47  
       
Menu functions  
Delete all (Menu 6.2.4)  
Viewing game information  
Use this menu to delete all media items in each media  
box.  
Scroll to the game you want and press <Options>.  
And then select Properties  
.
Memory status (Menu 6.2.5)  
Internet settings (Menu 6.3.2)  
You can check the total amount of memory for media  
items and the amount of memory currently in use in  
each media box.  
Use this menu to set up the network settings required  
for accessing the Java server.  
APN: enter the access point name.  
Login ID: enter the user ID.  
JAVA world (Menu 6.3)  
Password: enter the password.  
Use this menu to access and play Java games and to  
change the network setting required for accessing  
Java services.  
DNS settings: enter the DNS (Domain Name  
Server) address to connect to the JAVA server.  
Memory status (Menu 6.3.3)  
Downloads (Menu 6.3.1)  
Use this menu to check the amount of memory  
currently being used and memory available for Java  
games.  
Use this menu to play a Java game.  
Playing a game  
1. Scroll the game you want on the game list and  
press <Options> and select Launch  
.
2. For SnowBallFight, press any key twice to go to  
the startup screen and press [ ] to start a game.  
For BubbleSmile, select START GAME  
.
48  
     
Listening to the radio  
FM radio (Menu 6.4)  
1. From the FM radio screen, scroll to a radio channel.  
Use this menu to access the FM radio on your phone.  
First, you must connect your phone with the headset,  
which serves as a radio antenna.  
2. Press <Options> and select Power on to turn on  
the radio.  
Press [  
/
] to adjust the volume.  
Finding and setting radio channels  
• You can answer an incoming call or use other  
phone functions while listening to the radio.  
• The quality of the radio broadcast depends on  
the radio station’s coverage in that particular  
area.  
1. Press <Options> and select Power on to turn on  
the radio.  
2. Press [Left] or [Right] to move to the frequency of  
a radio channel.  
The frequency moves by 0.1 MHz increments.  
Otherwise, hold [Left] or [Right] down to  
automatically scan through and save available  
radio frequencies.  
3. To turn off the radio, access the FM radio menu  
and press <Options> and select Power off  
.
Using radio options  
3. Scroll to an empty location.  
On the FM radio screen, press <Options> to access  
the following radio options:  
4. Press <Options> and select Add  
.
5. Enter a name for the channel and press [  
].  
Power on/off: turn the radio on or off.  
6. Enter the channel number to be assigned to the  
frequency.  
Add: add a radio channel. You can store up to 30  
channels.  
Edit: edit the name or frequency for the channel.  
49  
   
Menu functions  
Self tuning: let the phone automatically scan  
through and save available radio frequencies.  
Organiser (Menu 7)  
The Organiser feature enables you to keep track of  
your schedule and tasks and to make a voice memo.  
You can also set the time and date and use convenient  
features, such as alarms, calculator, converter, and  
stopwatch.  
Remove: remove the selected channel or all  
channels.  
Speaker on/Earphone on: change the audio  
mode to the phone’s speaker or headset.  
Volume: set the radio volume.  
To access this menu, press <Menu> in Idle mode and  
select Organiser  
.
New memo (Menu 7.1)  
Use this menu create a new memo.  
You can quickly access this menu by holding down  
[C] in Idle mode.  
Creating a new memo  
1. Enter the memo text and press <OK>.  
2. Select a memo type.  
3. Select a date from the calendar.  
4. If you selected Call in step 2, enter a phone  
number and press <OK>.  
50  
   
5. Enter the time for the memo and press <OK>.  
Calendar (Menu 7.2)  
Your phone is preset to a 24-hour format. You  
Use this menu to keep track of your monthly schedule.  
can change the time format.p. 53  
When you access this menu, the calendar displays  
with today’s date highlighted and selected. On the  
bottom, the number of memos of each type appears.  
The following icons indicate the type of memo:  
6. Select AM or PM in 12-hour time format.  
7. Press <Yes> to set an alarm for the memo.  
8. Enter the time for the alarm to ring and press  
Scheduled events  
Calls  
Tasks  
<
OK>.  
Anniversary  
9. Select AM or PM in 12-hour time format.  
10.Select an alarm melody. The memo is saved.  
Selecting a date in the calendar  
Using memo options  
Press [Left] or [Right] to move to another day.  
Press [Up] or [Down] to move to another week.  
After the memo is saved, press <Options> to access  
the following options:  
Press and hold [Up] or [Down] to move to another  
month.  
Add: add a new memo.  
Delete: delete the current memo.  
Edit: edit the memo.  
Press and hold [Left] or [Right] to move to another  
year.  
Move: change the date of the memo.  
Copy: copy the memo to another date.  
51  
   
Menu functions  
While viewing the task memo, press <Options> to  
access the following options:  
Using the calendar options  
From the calendar, press <Options> to access the  
following options:  
Add: add a new task memo.  
Mark: change the task status.  
Edit: edit the memo content.  
Add memo: add a new memo to the selected  
date.  
Go to date: enter the date you want to access.  
Move: move the memo to a different date.  
Copy: copy the memo to a different date.  
Delete: delete the memo.  
View all: access all memos.  
Delete day: delete the memos stored for the  
currently selected date.  
Delete all: delete all task memos.  
Delete all: delete all memos.  
Clock (Menu 7.4)  
Creating memos and using memo options  
Use this menu to change the time and date displayed  
on your phone. Before setting the time and date,  
specify your time zone in the Set world time menu.  
You can create memos and access memo options as  
you would in the New memo menu.  
To do list (Menu 7.3)  
Set time: enter the current time using the number  
keys.  
Use this menu to display task memos you have  
created. The icons on the list indicate the task status:  
Set date: enter the current date using the number  
keys.  
Done  
Undone  
52  
   
Set world time: set your local time zone and find  
out what time it is in another part of the world.  
Stopping an alarm  
Press <Confirm>.  
To apply Daylight Savings Time to a time zone,  
To stop the morning call alarm and cause it to  
sound again after 5 minutes, press <Snooze> or  
any key.  
press <Set  
>
and select Set DST  
.
Set format: select time and date format.  
To remove an alarm set, access it, press  
<Options> and select Remove alarm.  
Alarm (Menu 7.5)  
Setting the alarm to ring even if the phone is  
off  
Use this menu to set alarms to sound at a specific  
time.  
From the Alarm screen, select Auto power  
On.  
Setting an alarm  
1. Select the type of alarm.  
If the phone is off when it is time for the alarm to ring,  
the phone switches on and sounds the alarm.  
2. Press <Options> to access the following options  
for setting an alarm:  
Voice recorder (Menu 7.6)  
Alarm day: select the days of the week.  
Alarm time: enter the time for the alarm.  
Use this menu to record voice memos. A voice memo  
can be up to one hour long.  
Your phone is preset to a 24-hour format. You  
can change the time format.  
Record (Menu 7.6.1)  
p. 53  
1. Select  
to start recording.  
Alarm tone: select an alarm melody.  
2. Speak into the microphone.  
3. Set each alarm options.  
Select  
Select  
to pause the recording.  
to resume the recording.  
53  
       
Menu functions  
3. When you finish, Select  
automatically saved.  
. The voice memo is  
Delete all (Menu 7.6.3)  
Use this menu to delete all voice memos in the  
phone’s memory.  
4. Press <Options> to access the following options:  
Send: send the voice memo via MMS.  
Rename: change the name of the voice memo.  
Delete: delete the voice memo.  
Properties: view the properties of the voice  
memo.  
When a confirmation message appears, press <Yes>.  
Settings (Menu 7.6.4)  
Use this menu to configure settings for recording a  
voice memo.  
Recording time: select a voice recording mode.  
Voices (Menu 7.6.2)  
Normal: record a voice memo within the limit of  
the currently available memory.  
Use this menu to access the list of voice memos you  
have recorded. Select a voice memo to listen.  
Limit size (for MMS): record a voice memo for  
adding to an MMS message.  
During playback,  
Select  
Select  
Select  
Select  
Select  
to pause.  
Volume: select a volume level for recording a  
voice memo.  
to resume.  
Default name: change the default prefix for  
saving a voice memo.  
to move forward.  
to move backward.  
to stop.  
Memory status (Menu 7.6.5)  
Press [ / ] to adjust the volume.  
You can check the total amount of memory for voice  
memos and the amount of memory currently in use.  
54  
 
4. Press [Left] or [Right] to select the unit you want  
to convert to.  
Calculator (Menu 7.7)  
Use this menu to perform basic arithmetic functions  
such as addition, subtraction, multiplication, and  
division.  
5. Press <OK>.  
The equivalent value for the amount you entered  
displays.  
1. Enter the first number.  
Press [ ] to insert a decimal point.  
2. Press [ ] to access the math function you want.  
3. Enter the second number.  
Timer (Menu 7.9)  
Use this menu to set a period of time for the phone to  
count down. The phone will sound an alarm when the  
specified period of time has expired.  
4. Press <Equal> to view the result.  
Starting the timer  
1. Press <Set>.  
Conversion (Menu 7.8)  
Use this menu for common conversions, such as  
currency and temperature.  
2. Enter the length of time you want to count down  
and press <OK>.  
1. Select the converter type you want.  
3. Press <Start> to start counting down.  
2. Enter the value to be converted and press [Down].  
Stopping the timer  
Press [ ] to insert a decimal point.  
Press [ ] to change the temperature to above  
zero (+) or below zero (-).  
Press any key to stop the timer when it rings.  
Press <Stop> on the Timer screen to stop the  
timer before it rings.  
3. Press [Left] or [Right] to select the original unit  
and press [Down].  
55  
     
Menu functions  
Stopwatch (Menu 7.10)  
Take photos (Menu 8.1)  
Use this menu to measure elapsed time. The precision  
of the stopwatch is one one-hundredth of a second.  
The maximum measurement time is 10 hours.  
The camera produces JPEG photos.  
When you take a photo in direct sunlight or in bright  
conditions, shadows may appear on the photo.  
1. Press <OK> to start the timer.  
Taking a photo  
1. Press and hold [ ]. The image to be captured  
appears on the display.  
2. Press <OK> to check an interval. You can repeat  
this step for a total of 4 intervals.  
3. To reset the timer, press <Reset>.  
2. Adjust the image by aiming the camera lens at the  
subject.  
Camera (Menu 8)  
You can use the camera module embedded in your  
phone to take photos.  
Press <  
p. 57  
Use the keypad to change the camera settings  
or switch to other modes. p. 57  
> to use the camera options.  
To access this menu, press <Menu> in Idle mode and  
select Camera, or press [ ].  
3. Press [ ] to take a photo. The photo is saved in  
the My photos folder.  
• Do not take photos of people without their  
permission.  
• Do not take photos in a place where cameras are  
not allowed.  
Hold the phone still for one or two seconds after  
pressing the camera shutter key to allow the  
image data to process.  
• Do not take photos in a place where you may  
interfere with another person’s privacy.  
56  
       
Timer: set a time delay before the camera takes a  
photo.  
4. To  
use photo options  
Press  
<Options>.p. 58  
Settings: change the default settings for taking a  
photo.  
p. 59  
delete the photo  
<Delete>.  
Help: view the functions of the keys you can use.  
return to Capture mode  
[C].  
Using the keypad in Capture mode  
Using camera options in Capture mode  
You can use the keypad to customise your camera  
settings in Capture mode.  
In Capture mode, press <  
options:  
> to access the following  
Keys  
Function  
Mode: take a photo in the following modes:  
Flips the image vertically.  
Shows the mirror image.  
Adjusts the brightness of the image.  
Normal shot: take a photo in the normal mode.  
Multi-shot: take a series of action stills. Select  
the number of photos the camera will take.  
Left/  
Right  
Night mode: take a high quality photo in low  
lighting conditions.  
Up/  
Zooms in or out.  
Capture only: set the phone to automatically  
Down  
return to Capture mode after saving a photo.  
1
2
3
4
Changes the size of the preview screen.  
Changes the image size.  
Effects: change the colour tone or apply a special  
effect to the photo.  
Changes the image quality.  
Changes the camera mode.  
Rotation: show the mirror image or flip the image  
vertically.  
57  
     
Menu functions  
Go to my photos: display the photos stored in the  
My photos folder.  
Keys  
5
Function  
Changes the colour tone or applies a special  
effect to the photo.  
Set as: set the photo as your wallpaper or as a  
caller ID image for a Phonebook entry.  
6
7
8
Goes to the Settings menu.  
p. 59  
Protection: protect the photo from being deleted.  
Sets the timer.  
Properties: view the properties of the photo.  
Shows the photos stored in the My photos  
folder.  
My photos (Menu 8.2)  
Use this menu to access photos you have taken.  
9
Shows the help.  
Viewing the photos  
1. Scroll to a photo and press <View>.  
2. To go back to the photo list, press <Multi>.  
Using photo options  
After saving a photo, press <Options> to access the  
following options:  
Using photos options  
Send: send the photo via MMS.  
Press <Options> to access the following options:  
Rename: change the name of the photo.  
Available options vary depending on whether you  
are looking at the photo list or viewing a photo.  
Send: send the photo via MMS.  
Rename: change the name of the photo.  
Delete: delete the photo.  
58  
     
Move to album: move the photo to the My  
album folder.  
Settings (Menu 8.5)  
Use this menu to configure the default settings for  
taking a photo.  
Set as: set the photo as your wallpaper or as a  
caller ID image for a Phonebook entry.  
Photo size: select an image size.  
Protection: protect the photo from being deleted.  
Photo quality: select an image quality.  
Properties: view the properties of the photo.  
Shutter sound: select the sound that you hear  
when you press the shutter, [ ].  
My albums (Menu 8.3)  
Default name: set the default prefix for saving a  
photo.  
Use this folder to save your photos in separate photo  
albums.  
Memory status (Menu 8.6)  
You can view photos and use options the same way in  
the My photos menu.  
Use this menu to check the amount of memory  
currently being used and memory available for the  
camera.  
Delete all (Menu 8.4)  
Use this menu to delete photos in each folder and all  
photos at one time.  
1. Press <Select> to check the photo categories to  
be cleared.  
2. Press <OK>.  
59  
           
Menu functions  
Skin (Menu 9.1.2)  
Phone settings (Menu 9)  
Use this menu to customise your phone settings. You  
can also reset the settings to their default values.  
You can select a skin colour pattern for Menu mode.  
Backlight time (Menu 9.1.3)  
To access this menu, press <Menu> in Idle mode and  
You can select the length of time the backlight and the  
display stay on.  
select Phone settings  
.
LCD brightness (Menu 9.1.4)  
Display (Menu 9.1)  
You can adjust the brightness of the display for  
varying lighting conditions.  
Use this menu to change settings for the display and  
light.  
Dialing font colour (Menu 9.1.5)  
Wallpaper (Menu 9.1.1)  
You can select whether or not the dialing font color is  
used.  
You can change the background image that is  
displayed in Idle mode.  
Select an image from the following image categories.  
Greeting message (Menu 9.2)  
Default wallpapers: select one of preset images.  
Use this menu to enter the greeting that is displayed  
briefly when the phone is switched on.  
Photos: select one of the photos you have taken.  
Downloaded images: select one of the images  
stored in the images folder.  
Language (Menu 9.3)  
Text position: select a position. If you do not  
Use this menu to select one of several languages for  
the display text, and to be used in the text input  
mode.  
want text to display in Idle mode, select Off  
.
Text style: select a text style.  
60  
             
Phone lock (Menu 9.4.3)  
Security (Menu 9.4)  
The Phone Lock feature locks the phone from  
unauthorised use.  
Use this menu to protect the phone against  
unauthorised use by managing the several access  
codes of your phone and SIM card.  
When this feature is enabled, you must enter a 4- to  
8-digit phone password each time the phone is  
switched on.  
If you enter an incorrect PIN /PIN 2 three times in  
succession, the SIM card is blocked. To unblock it  
you need to enter your PUK/PUK2 (Personal  
Unblocking Key). The codes are supplied by your  
network operator.  
The password is preset to 00000000. To change the  
password, use the Change password menu.  
Change password (Menu 9.4.4)  
PIN check (Menu 9.4.1)  
Use this menu to change your phone password.  
The 4-to 8-digit PIN (Personal Identification Number)  
protects your SIM card against unauthorised use.  
When this feature is enabled, the phone requires your  
PIN each time it is switched on.  
Privacy (Menu 9.4.5)  
Use this menu to lock your media contents, including  
MMS messages, images, and sounds.  
1. Press <Select> to check the item(s) to lock.  
2. Press <OK> to lock the marked items.  
3. Enter the phone password and press <OK>.  
Change PIN (Menu 9.4.2)  
Use this menu to change your PIN. The PIN Check  
feature must be enabled to use this feature.  
To access a locked item, you need to enter the phone  
password.  
61  
               
Menu functions  
SIM lock (Menu 9.4.6)  
Auto keypad lock (Menu 9.5)  
The SIM Lock feature allows your phone to work only  
with the current SIM by assigning a SIM lock code. You  
must enter the SIM lock code to use a different SIM  
card.  
Use this menu to lock the keypad automatically if no  
key is pressed within a few minutes.  
Auto redial (Menu 9.6)  
FDN mode (Menu 9.4.7)  
Use this menu to set the phone to make up to 10  
attempts to redial a phone number after an  
unsuccessful call.  
If supported by your SIM card, Fixed Dialing Number  
(FDN) mode restricts your outgoing calls to a limited  
set of phone numbers. When this feature is enabled,  
you can make calls only to phone numbers stored in  
Phonebook. To use this feature, you must enter your  
PIN2.  
Voiceclarity (Menu 9.7)  
Use this menu to increase the microphone’s sensitivity  
to allow the other person on the phone to hear your  
voice clearly, even though you may be whispering.  
Change PIN2 (Menu 9.4.8)  
If supported by your SIM card, the Change PIN2  
feature changes your current PIN2.  
62  
           
Receiving Phonebook data  
Anykey answer (Menu 9.8)  
1. Align the infrared ports on  
both the devices.  
Use this menu to answer an incoming call by pressing  
any key, except  
When this option is set to Off, you must press  
Accept> to answer a call.  
[
].  
2. Set the infrared feature to  
[
]
or  
On on your phone (the  
<
IrDA icon  
displays on  
the top line).  
Infrared activation (Menu 9.9)  
If there is no communication between your  
phone and the other IrDA-compliant device  
within 60 seconds of activating the feature, it  
is automatically deactivated.  
Use this menu to activate the infrared port to send or  
receive Phonebook entries.  
Sending Phonebook data  
You can send Phonebook entries by selecting the Send  
3. When you have received entry(ies) from the other  
person, you are prompted to save the entry(ies).  
via infrared option.  
p. 27  
4. Press <Save>.  
5. Press <SIM> or <Phone> to be saved in the  
memory location you selected.  
63  
     
Solve problems  
Reset settings (Menu 9.10)  
Solve problems  
Help and personal needs  
Use this menu to reset the phone settings, and sound  
settings individually. You can also reset all the settings  
in your phone at the same time.  
To save the time and expense of an unnecessary  
service call, perform the simple checks in this section  
before contacting a service professional.  
1. Press <Select> to select the setting category to  
be reset. And then press <Yes>.  
2. Enter the phone password and press <OK>.  
When you switch on your phone, the following  
messages may appear:  
The password is preset to 00000000. You can  
change this password.  
p. 61  
“Insert SIM card”  
Be sure that the SIM card is correctly installed.  
“Phone locked Enter password”  
The automatic locking function has been enabled.  
You must enter the phone’s password before you  
can use the phone.  
“Enter PIN”  
You are using your phone for the first time. You  
must enter the PIN supplied with the SIM card.  
The PIN Check feature is enabled. Every time the  
phone is switched on, the PIN has to be entered.  
To disable this feature, use the PIN check menu.  
64  
         
“Enter PUK”  
The PIN code has been entered incorrectly three  
Your correspondent cannot reach you  
Be sure your phone is switched on. (  
for more than one second.)  
[
]
pressed  
times in succession, and the phone is now blocked.  
Enter the PUK supplied by your service provider.  
Be sure you are accessing the correct cellular  
network.  
“No Service,” “Network Failure,” or “Not  
Done” displays  
Be sure that you have not set an incoming call  
barring option.  
The network connection has been lost. You may be  
in a weak signal area. Move and try again.  
Your correspondent cannot hear you speaking  
You are trying to access an option for which you  
have no subscription with your service provider.  
Contact the service provider for further details.  
Be sure you have switched on the microphone.  
Be sure you are holding the phone close enough to  
your mouth. The microphone is located at the  
bottom of the phone.  
You have entered a number but it was not  
dialled  
The phone starts beeping and “Battery low”  
flashes on the display  
Be sure that you have pressed  
[
].  
Be sure you have accessed the right cellular  
network.  
Your battery is insufficiently charged. Recharge the  
battery.  
Be sure that you have not set an outgoing call  
barring option.  
The audio quality of the call is poor  
Check the signal strength indicator on the display  
). The number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
(
65  
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest certified  
power level, the actual SAR level of the phone while  
operating can be well below the maximum value. This is  
because the phone is designed to operate at multiple  
power levels so as to use only the power required to reach  
the network. In general, the closer you are to a base  
station, the lower the power output of the phone.  
Precautions when using batteries  
Never use a charger or battery that is damaged in any  
way.  
Use the battery only for its intended purpose.  
If you use the phone near the network’s base station,  
it uses less power. Talk and standby time are greatly  
affected by the signal strength on the cellular network  
and the parameters set by the network operator.  
Battery charging time depends on the remaining  
battery charge, the type of battery, and the charger  
used. The battery can be charged and discharged  
hundreds of times, but it will gradually wear out. When  
the operation time is noticeably shorter than normal, it  
is time to buy a new battery.  
Before a new model phone is available for sale to the  
public, compliance with the European R&TTE Directive  
must be shown. This directive includes as one of its  
essential requirements the protection of the health and  
safety of the user and any other person.  
If left unused, a fully charged battery will discharge  
itself over time.  
Use only Samsung-approved batteries, and recharge  
your battery only with Samsung-approved chargers.  
Disconnect the charger from the power source when it  
is not in use. Do not leave the battery connected to a  
charger for more than a week, since overcharging may  
shorten its life.  
*
The SAR limit for mobile phones used by the public is 2.0  
watts/kilogram (W/kg) averaged over ten grams of body tis-  
sue. The limit incorporates a substantial margin of safety to  
give additional protection for the public and to account for any  
variations in measurements. The SAR values may vary,  
depending on national reporting requirements and the network  
band.  
67  
 
Health and safety information  
Extreme temperatures will affect the charging capacity  
of your battery: it may require cooling or warming  
first.  
Do not leave the battery in hot or cold places because  
the capacity and lifetime of the battery will be  
reduced. Try to keep the battery at room temperature.  
A phone with a hot or cold battery may not work  
temporarily, even when the battery is fully charged. Li-  
ion batteries are particularly affected by temperatures  
below 0°C (32°F).  
Road safety  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But an  
important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility.  
When using your wireless phone while driving, follow local  
regulations in the country or region you are in.  
Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object like a coin,  
clip or pen causes a direct connection between the +  
and – terminals of the battery (metal strips on the  
battery). For example, do not carry a spare battery in  
a pocket or bag where the battery may contact metal  
objects. Short-circuiting the terminals may damage  
the battery or the object causing the short-circuiting.  
Operating environment  
Remember to follow any special regulations in force in the  
area you are in, and always switch off your phone  
whenever it is forbidden to use it, or when it may cause  
interference or danger.  
When connecting the phone or any accessory to another  
device, read its user’s guide for detailed safety  
instructions. Do not connect incompatible products.  
Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
As with other mobile radio transmitting equipment, users  
are advised that for the satisfactory operation of the  
equipment and for the safety of personnel, it is  
recommended that the equipment should only be used in  
the normal operating position (held to your ear with the  
antenna pointing over your shoulder).  
68  
 
Other medical devices  
Electronic devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is  
adequately shielded from external RF energy.  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic  
equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to  
discuss alternatives.  
Your physician may be able to assist you in obtaining this  
information.  
Switch off your phone in health care facilities when  
regulations posted in these areas instruct you to do so.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
distance of 15 cm (6 inches) be maintained between a  
wireless phone and a pacemaker to avoid potential  
interference with the pacemaker. These recommendations  
are consistent with the independent research and  
recommendations of Wireless Technology Research. If you  
have any reason to suspect that interference is taking  
place, switch off your phone immediately.  
Vehicles  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with  
the manufacturer or its representative regarding your  
vehicle.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Hearing aids  
Posted facilities  
Some digital wireless phones may interfere with some  
hearing aids. In the event of such interference, you may  
wish to consult your hearing aid manufacturer to discuss  
alternatives.  
Switch off your phone in any facility where posted notices  
require you to do so.  
69  
Health and safety information  
Potentially explosive environments  
Emergency calls  
Switch off your phone when in any area with a potentially  
explosive atmosphere, and obey all signs and instructions.  
Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
This phone, like any wireless phone, operates using radio  
signals, wireless, and landline networks as well as user-  
programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never  
rely solely on any wireless phone for essential  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas), chemical plants, or where blasting operations are  
in progress.  
communications like medical emergencies.  
To make or receive calls, the phone must be switched on  
and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
Areas with a potentially explosive atmosphere are often  
but not always clearly marked. They include the areas  
below decks on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas, such as  
propane or butane, areas where the air contains chemicals  
or particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn  
off your vehicle engine.  
To make an emergency call:  
1. Switch on the phone.  
2. Key in the emergency number for your present  
location. Emergency numbers vary by location.  
3. Press  
[
].  
Certain features like Call Barring may need to be  
deactivated before you can make an emergency call.  
Consult this document and your local cellular service  
provider.  
70  
 
Other important safety information  
Care and maintenance  
Only qualified personnel should service the phone or  
install the phone in a vehicle. Faulty installation or  
service may be dangerous and may invalidate any  
warranty applicable to the device.  
Check regularly that all wireless phone equipment in  
your vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as the  
phone, its parts, or accessories.  
For vehicles equipped with an air bag, remember that  
an air bag inflates with great force. Do not place  
objects, including installed or portable wireless  
equipment, in the area over the air bag or in the air  
bag deployment area. Improperly installed wireless  
equipment could result in serious injury if the air bag  
inflates.  
Switch off your phone before boarding an aircraft. It is  
dangerous and illegal to use wireless phones in an  
aircraft because they can interfere with the operation  
of the aircraft.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the  
offender, or legal action, or both.  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for many  
years.  
Keep the phone and all its parts and accessories out of  
the reach of small children.  
Keep the phone dry. Precipitation, humidity, and  
liquids contain minerals that corrode electronic  
circuits.  
Do not use the phone with a wet hand. Doing so may  
cause an electric shock to you or damage to the  
phone.  
Do not use or store the phone in dusty, dirty areas, as  
its moving parts may be damaged.  
Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt certain  
plastics.  
Do not store the phone in cold areas. When the phone  
warms up to its normal operating temperature,  
moisture can form inside the phone, which may  
damage the phone’s electronic circuit boards.  
71  
 
Health and safety information  
Do not drop, knock, or shake the phone. Rough  
handling can break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the phone. Wipe it with a  
soft cloth slightly dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the device’s  
moving parts and prevent proper operation.  
Do not put the phone in or on heating devices, such as  
a microwave oven, stove, or radiator. The phone may  
explode when overheated.  
Use only the supplied or an approved replacement  
antenna. Unauthorised antennas or modified  
accessories may damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger, or any accessory is not  
working properly, take it to your nearest qualified  
service facility. The personnel there will assist you, and  
if necessary, arrange for service.  
72  
Caller ID • 33  
Calls  
Display  
language • 60  
settings • 60  
Diverting, calls • 32  
DTMF tones, send • 24  
SMS • 36  
Index  
A
ABC mode, text input • 19  
Active line • 34  
Alarm • 53  
Infrared, connect • 63  
International calls • 21  
Internet • 44  
answering • 22  
barring • 32  
diverting • 32  
holding • 24  
redialling • 21  
rejecting • 22  
transferring • 23  
waiting • 33  
K
E
Key tone volume • 35  
Keypad tones  
selecting • 35  
sending • 24  
Answering  
Emergency calls • 70  
call • 22  
second call • 23  
Anykey answer • 63  
Auto redial • 62  
F
FDN (Fixed Dial Number) mode  
• 62  
Camera  
L
options • 57  
photos • 56  
CB (Cell Broadcast) messages •  
41  
Characters, enter • 19  
Conference call • 25  
Conversion • 55  
FM radio • 49  
Funbox • 44  
Language, select • 60  
Last number, redial • 21  
Locking  
B
Backlight time, set • 60  
Barring, calls • 32  
Battery  
G
media contents • 61  
phone • 61  
SIM card • 62  
Games • 48  
charging • 7  
Greeting message • 60  
low indicator • 8  
precautions • 67  
Broadcast messages • 41  
Browser, WAP • 44  
Loudspeaker • 23, 24  
H
Low battery indicator • 8  
Health and safety • 66  
Hide number • 33  
Holding, call • 24  
D
Deleting  
M
call records • 30  
memos • 51  
MMS messages • 38  
SMS messages • 36, 37  
Delivery reports, message • 42  
Dialled calls • 31  
Memory status  
camera • 59  
downloaded items • 48  
messages • 43  
Message tone • 35  
Messages  
C
I
Calculator • 55  
Call records  
dialled • 31  
received • 31  
Call time • 31  
Icons, description • 10  
Images, downloaded • 47  
Inbox, messages  
MMS • 38  
73  
 
Index  
cell broadcast • 41  
greeting • 60  
MMS • 37  
SMS • 36  
voice • 41  
Own number • 29  
SMS • 41  
sound • 34  
SIM card  
inserting • 7  
locking • 62  
SMS messages  
R
Received calls • 31  
Received messages  
SMS • 36  
P
Password  
call barring • 33  
phone • 61  
Phone  
Recording  
web • 40  
voice memos • 53  
Redialling  
automatically • 62  
manually • 21  
Resetting phone • 64  
Ringer  
incoming calls • 34  
messages • 35  
Road safety • 68  
Roaming • 33  
Minute minder • 35  
MMS messages  
deleting • 36  
viewing • 36  
care and maintenance •  
71  
display • 10  
icons • 10  
locking • 61  
password • 61  
resetting • 64  
switching on/off • 8  
unpacking • 6  
creating/sending • 37  
Sound settings • 34  
Sounds, downloaded • 47  
Speed-dial • 28  
Stopwatch • 56  
Switching on/off  
microphone • 24  
phone • 8  
deleting • 38  
viewing • 38, 39  
Multi-party calls • 25  
Muting  
key tones • 24  
microphone • 24  
N
T
Phonebook  
S
Names  
copying • 27  
editing • 27  
options • 27  
Text input mode, change • 19  
Text, enter • 19  
Timer • 55  
Safety  
entering • 19  
searching • 26  
Network selection • 33  
Network services • 32  
information • 66  
Security, calls • 61  
Sent messages  
MMS • 38, 39  
SMS • 37  
speed-dialling • 28  
Tone  
Photos  
keypad • 35  
taking • 56  
PIN, change • 61  
PIN2, change • 62  
Privacy • 61  
message • 35  
minute minder • 35  
power on/off • 35  
O
Setting  
Organiser • 56  
Outbox, messages  
MMS • 39  
SMS • 37  
group • 29  
MMS • 42  
proxy • 46  
V
Problems, solve • 64  
Voice clarity, microphone • 24  
74  
Voice mail • 41  
Voice memos  
playing • 54  
recording • 53  
Voicemail server • 41  
W
Waiting call • 33  
WAP browser  
access • 44  
bookmarks • 45  
cache, clear • 45  
75  

Sony PEG NZ90 User Manual
Sony Ericsson T280I User Manual
Sears Craftman 24779585 User Manual
Seagate ST200FP0021 User Manual
SanDisk SDUFD2AB 1024 User Manual
Sagem MW 302X User Manual
Roberts Radio CR9910 User Manual
Research In Motion Blackberry Cell Phone 9860 User Manual
Pantech HERO Cell phone User Manual
Panasonic SL PD8 User Manual