Samsung GH68 06626A User Manual

* Some of the contents of this manual may differ from your phone,

depending on the software installed or your service provider.

Printed in Korea

Code No.:GH68-06626A

English. 02/2005. Rev 1.0

World Wide Web

http://www.samsungmobile.com

Use road safety at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency call

For more detailed safety information, see "Health and

safety information" on page 57.

Key in the emergency number for your present

location, then press [ ].

About this Guide

•

Tri-band operation

Use your phone in worldwide GSM networks, in

any of 900, 1800, and 1900 bands.

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to

“Getting started.”

Special

features of your phone

In this guide, the following instruction icons appear:

Indicates that you need to pay careful

attention to the subsequent information

regarding safety or phone features.

•

Simple, compact design with Intenna

Samsung’s powerful intenna technology allows

the best call quality without an annoying

external antenna.

Indicates that you can get more

information on the referenced page.

ꢀ

•

WAP browser

→

Indicates that you need to press the

Navigation keys to scroll to the specified

option and then select it.

Access the wireless web and

access various services and up-

to-the-minute information.

[key name] Indicates a key on the phone. For

example, [ ]

<soft key> Indicates a soft key, whose function is

displayed on the phone screen. For

example, <Menu

•

Phonebook

Store up to 2000 contact

numbers.

•

Voice recorder

Record memos or sounds.

Java

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, and sounds.

Enjoy Java™-based embedded

games and download new

games.

•

Melody composer

Create your own melodies and

set them as your call ringer.

•

Calendar and To do list

Keep track of your daily, weekly,

and monthly schedules and

tasks.

Send messages.................................................... 14

View messages .................................................... 15

Compose your melody .......................................... 16

Contents

Unpack

Enter text

Make sure you have each item

Your phone

ABC, T9, Number, and Symbol mode

Call functions

Buttons, features, and locations

Get started

Advanced calling features

Menu functions

First steps to operate your phone

All menu options listed

Solve problems

Install and charge the phone ................................... 7

Power on or off...................................................... 8

Keys and display.................................................... 9

Access menu functions.......................................... 11

Customise your phone .......................................... 12

Make/answer calls................................................ 13

Health and safety information

Index

Step outside the phone

Begin with your WAP, melody composer, messages, and oth-

er special features

Browse WAP........................................................ 13

Use Phonebook.................................................... 14

Overview of menu functions

To access Menu mode, press <Menu> from the idle screen.

1 SIM AT

ꢀ

p. 24

6 Funbox

ꢀ

p. 38

8 Phonebook

ꢀp. 48

4 Sound settings

ꢀp. 29

1 WAP browser

2 Games

3 Sounds

4 Images

5 Delete all

6 Memory status

7 Melody composer

ꢀp. 38

ꢀp. 41

ꢀp. 42

ꢀp. 41

ꢀp. 42

1 Search

2 Add entry

3 Group search

4 Group edit

5 Speed dial list

6 Delete all

ꢀp. 49

ꢀp. 50

ꢀp. 51

1 Ring tone

2 Ring volume

3 Alert type

4 Keypad tone

5 Message tone

6 Folder tone

7 Power on/off

8 Alert on call

9 Extra tones

ꢀp. 29

ꢀp. 30

2 Call records

ꢀp. 24

1 Missed calls

2 Received calls

3 Dialled calls

4 Delete all

ꢀp. 24

ꢀp. 25

7 Memory status

5 Call time

7 Organiser

ꢀp. 44

9 Phone settings

ꢀp. 51

6 Call cost^*

1 Alarm

2 Calendar

3 Time & date

4 Calculator

5 To do list

6 Voice memo

7 Currency exchange

ꢀp. 44

ꢀp. 45

ꢀp. 46

ꢀp. 47

ꢀp. 48

1 Display settings

2 Greeting message

3 Own number

4 Language

5 Security

6 Extra settings

7 Short cut

ꢀp. 51

ꢀp. 52

ꢀp. 54

5 Messages

ꢀ

p. 30

3 Network services

ꢀp. 26

1 Text messages

2 Multimedia messages ꢀp. 33

3 Push messages

4 Delete all

5 Voice mail

6 Broadcast messages

7 Memory status

ꢀp. 30

1 Call diverting

2 Call barring

3 Call waiting

4 Network selection

5 Caller ID

6 Closed user group

7 Band selection

ꢀp. 26

ꢀp. 27

ꢀp. 26

ꢀp. 28

ꢀp. 37

ꢀp. 38

8 Reset settings

*Shows only if supported by your

SIM card.

X480Eng4Asia.book Page 6 Wednesday, February 1, 2006 9:43 AM

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Display

Phone

Travel adapter

Navigation keys

(Up/Down/Left/

Right)

WAP access/

Confirm key

Headset jack

Right soft key

Battery

User’s manual

Left soft key

Volume keys

Power on/off/

Menu exit key

You can obtain various accessories from your local

Samsung dealer.

Cancel/Correct

key

Dial key

The items supplied with your phone and the accessories

at your Samsung dealer may vary, depending on your

country or service provider.

Alphanumeric

keys

Microphone

Special

function keys

Install the battery.

Plug the travel adapter

into the phone.

Get started

First steps to operate your phone

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Remove the battery.

Insert the SIM card.

Plug the adapter into a standard AC wall outlet.

➁

➀

When the phone is completely charged (the battery

icon stops blinking), unplug the adapter from the

power outlet.

If the phone is already

on, first turn it off by

holding [ ].

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

Get started

Power on or off

Remove the adapter from the phone.

Power on

1. Open the phone.

2. Press and hold [ ] to turn on

the phone.

➀

➁

3. If necessary, enter the phone

➀

password and press <OK>.

Do not turn on

the phone when

mobile phone

4. If necessary, enter the PIN and

use is prohibited.

press <OK>.

Low battery indicator

Power off

1. Open the phone.

When the battery is low:

•

a warning tone sounds,

2. Press and hold [ ].

the battery low message displays, and

the empty battery icon [

] blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Keys and display

Key(s)

Description

Key(s)

Description

Delete characters from the display.

In Menu mode, return to the previous menu

level.

Perform the function indicated on the bottom

line of the display.

End a call.

In Idle mode, access the following menus

respectively.

Hold down to switch the phone on and off.

In Menu mode, cancel input and return the

phone to Idle mode.

•

Up/Down: your favourite menu option

p. 54

ꢀ

Enter numbers, letters, and some special

characters.

In Idle mode, hold [1] down to access your

•

Left: Text messages

Right: Ring tone

In Menu mode, scroll through the menu

options.

voicemail.

Enter special characters.

In Idle mode, launch the Wireless Application

Protocol (WAP) browser.

In Menu mode, select the highlighted menu

option.

In Idle mode, hold

[

]

down to activate or

deactivate Silent mode.

Adjust the volume of various sounds for the

phone.

In Idle mode, adjust the keypad tone

volume.

Send or answer a call.

In Idle mode, retrieve the last number

dialled, missed, or received.

(on the left)

In Menu mode, scroll through menu options.

Get started

Display

Layout

New text message

New voicemail message

New multimedia message

Alarm set

Icons

(continued)

The display has the three areas.

Icons

displays various icons.

Text and graphics

displays messages,

instructions, and

Mute mode is active

Active Silent mode or call ringer

set to vibrate p. 12, p. 29

Battery power level

ꢀp. 21

information you enter.

ꢀ

Soft key function

Menu Phonebook

indicators

shows the current

functions assigned to the

two soft keys.

Received signal strength

Icons

Call in progress

Out of your service area; you

cannot send or receive calls

Call diverting feature is active

ꢀp. 26

GPRS network

Roaming

Access menu functions

Select an

option

1. Press the appropriate soft key.

2. Press the Navigation keys to

move to the next or previous

option.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

3. Press <Select> or [ ] to

confirm the function displayed

or option highlighted.

display indicates their current role.

Phonebook

4. To exit, choose either of the

following methods:

•

Press < > or [

up one level.

C] to move

•

Press [ ] to return to Idle

mode.

Press the left soft

key to access

Menu mode.

Press the right soft

key to access the

Phonebook menu.

Use shortcuts Press the number key

corresponding to the option you

want.

Get started

Customise your phone

You can switch the phone to Silent

mode to avoid disturbing other

people with your phone sounds.

Switch to

Silent mode

1. In Idle mode, press <Menu

and select Phone settings

Language

→

Display

language

Press and hold [ ] in Idle mode.

2. Select a language.

You can protect the phone against

unauthorised use with a phone

password.

Phone lock

1. In Idle mode, press <Menu

→

Call ringer

melody

and select Sound settings

1. In Idle mode, press <Menu

→

Ring tone

and select Phone settings

2. Select a ringer melody.

Security

password

2. Enter the default password,

→

Change

You can set a wallpaper for the idle

screen using various pictures.

Idle mode

wallpaper

“00000000” and press <OK>.

1. In Idle mode, press <Menu

→

3. Enter a new 4- to 8- digit

and select Phone settings

Display settings

password and press <OK>.

→

4. Enter the new password again

Wallpaper Wallpaper list

→

and press <OK>.

2. Select an image.

3. Scroll to the image you want.

4. Press <Select>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Step outside the phone

Begin with your WAP, melody composer, messages, and

other special features

Phone lock

Browse WAP

Make/answer calls

Using a built-in WAP (Wireless Access Protocol)

browser, you can get easy access to the wireless web

to receive a variety of updated services and

1. Enter an area code and phone

Make a call

information and to enjoy download of web contents.

number.

2. Press [ ].

In Idle mode, press [ ].

Launch the

browser

3. To end the call, press [ ].

1. When the phone is ringing,

press [ ].

Answer a call

•

To scroll through browser items,

press [Up] or [Down].

Navigate the

browser

2. To end the call, press [ ].

•

To select an item, press [ ].

To return to the previous page,

press [C].

Press [ / ].

Adjust the

volume during

a call

•

To return to the homepage,

press <Menu> and select

Home

Step outside the phone

Use Phonebook

1. In Idle mode, press

Phonebook> and select

Find an entry

To the phone’s memory

Add an entry

1. In Idle mode, enter a phone

2. Select an entry.

number and press <Save>.

3. Select a number.

2. Select a number type.

4. Press [ ] to dial, or

3. Select Phone

<Options> to access options.

4. Enter a name and press <OK>.

5. Press <OK> to save the entry.

To the SIM card

Send messages

1. In Idle mode, press <Menu

and select Messages Text

messages Create

2. Enter the message text.

3. Press <Options> and select

Send a text

message (SMS)

1. In Idle mode, enter a phone

→

number and press <Save>.

→

2. Select a number type.

3. Select SIM

4. Enter a name and press <OK>.

Save and send or Send only

5. Press <OK> to save the entry.

4. If you selected Save and send

select a memory location.

5. Enter a destination number and

press <OK>.

8. To add other destinations,

select Add destination and

repeat from step 6.

1. In Idle mode, press <Menu

and select Messages

Multimedia messages

Create

Send a

→

multimedia

message

(MMS)

multimedia

message

(MMS)

→

9. To add destinations of other

types, press < > and repeat

from step 5.

2. Enter the message subject

press <Next>.

10.When you finish, select Send

3. Select Add here and add

message

message contents.

4. When you finish, press

View messages

<Options> and select Send.

5. Select a destination type.

When a notification appears:

View a text

message

6. Select one of Phone number

Press <View>. The message

displays.

E-mail, or Phonebook

7. Enter a destination number or

an e-mail address, or select

from Phonebook and press

From the Inbox:

1. In Idle mode, press <Menu

Text

and select Messages

messages Inbox

2. Select a message.

→

<OK>.

→

Step outside the phone

3. Select a note or rest and press

Select>.

When a notification appears:

Create a

melody

View a

multimedia

message

1. Press <View>.

4. Repeat steps 1 to 3 to add more

notes and rests.

2. Press <Options> and select

Retrieve. The message

displays.

5. When you have finished, press

Options> and select Save

6. Enter a melody name and press

OK>.

From the Inbox:

1. In Idle mode, press <Menu

and select Messages

Multimedia messages

Inbox

2. Select a message.

→

1. In Idle mode, press <Menu

and select Funbox Melody

composer Compose

melody

2. Press <Options> and select

Open

Playing a

melody

→

Compose your melody

1. In Idle mode, press <Menu

and select Funbox Melody

composer Compose

melody

3. Select the melody you want and

Create a

melody

→

press <Open>.

→

4. Press <Options> and select

Play

2. Move the selection point up or

down by pressing [Up] or

[Down].

Using ABC mode

Press the appropriate key until the character you want

appears on the screen.

Enter text

ABC, T9, Number, and Symbol mode

You can enter text for some features such as

messaging, Phonebook, or Organiser, using ABC

mode, T9 mode, Number mode, and Symbol mode.

Characters in order displayed

Key

Upper case

Lower case

Changing the text input mode

The text input mode indicator displays when the

cursor is in a text field.

Press the right soft key to change the input mode.

Example: Writing a text message

space

ABC mode

T9 mode

Tips for using ABC mode

Number mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

None

Symbol mode

Text input mode

indicator

•

Press [ ] to insert a space.

Enter text

•

Press [ ] to change case. Capital lock ( ), Lower

case ( ), and Initial capital ( ) are available.

3. When the word displays correctly, go to step 4.

Otherwise, press [ ] to display alternative word

choices for the Of and Me use [ ] and [ ].

•

Press [Left] or [Right] to move the cursor.

4. Press [ ] to insert a space and enter the next

word.

Press [

and hold [

] to delete characters one by one. Press

C] to clear the display.

Tips for using T9 mode

Using T9 mode

•

Press [1] to enter periods or apostrophes

automatically.

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to change case in T9 mode. Capital lock

(

), Lower case ( ), and Initial capital ( ) are

Entering a word in T9 mode

available.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

•

Press [Left] or [Right] to move the cursor.

Press [

and hold [

] to delete characters one by one. Press

5], [5], and [6] to

C] to clear the display.

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

T9 predicts the word that you are typing, and it

may change with each key that you press.

2. Enter the whole word before editing or deleting

characters.

2. Press [0] to display alternative words for your key

presses. When there are no more alternative

words, Add displays on the bottom line.

3. Press <Add>.

Call functions

4. Enter the word you want using ABC mode and

press <OK>.

Advanced calling features

Using Number mode

Making a call

1. In Idle mode, enter the area code and phone

number.

Number mode enables you to enter numbers.

Press the keys corresponding to the digits you want.

2. Press [ ].

Press [

]

to clear the last digit or press and hold

Using Symbol mode

Symbol mode enables you to insert symbols.

[C] to clear the whole display. You can move the

cursor to edit an incorrect digit.

Press

Making an international call

1. In Idle mode, press and hold [

appears.

display more symbols

select a symbol

[Up] or [Down].

0]. The

character

the corresponding

number key.

2. Enter the country code, area code, and phone

number, then press [ ].

clear the symbol(s)

insert the symbol(s)

[C].

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

<OK>.

2. Scroll to the number you want and press [ ].

Call functions

Making a call from Phonebook

Ending a call

Close the phone or press [ ].

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

Phonebook.

ꢀp. 49

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

keys.

Dialling a number from the phone’s memory

1. In Idle mode, press and hold [ ]. A + appears.

ꢀp. 50

Press [ ] or <Accept> to answer the call.

Tips for answering a call

•

When Anykey answer in the Extra settings

menu is active, you can press any key to answer

2. Enter the location number for the phone number

you want and press [ ].

a call, except for [ ] and <Reject>.

ꢀp. 54

3. Press [Up] or [Down] to scroll through other

numbers.

•

Press <Reject> or [ ] to reject a call.

When Active folder is active, you can just open

4. Press <Dial> or [ ] to dial the number you want.

the phone to answer a call.

Dialling a number from the SIM card

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

2. Press [Up] or [Down] to scroll through other

numbers.

3. Press <Dial> or [ ] to dial the number you want.

Viewing missed calls

Options during a call

If you have missed calls, the screen displays how

many calls you have missed.

You can access a number of functions during a call.

Adjusting the volume during a call

Use [ / ] to adjust the earpiece volume during a call.

1. Press <View>.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Placing a call on hold/Retrieving

Press <Hold> or <Unhold> to place the call on hold

or retrieve the call.

Connect the headset to the jack on the left side of the

phone.

Using the menu functions

Press <Options> and select Menu

The buttons on the headset work as listed below:

Press

Switching off the microphone

(Mute mode)

You can temporarily switch off your phone’s

microphone so that the other person on the phone

cannot hear you.

redial the last call

answer a call

end a call

the button twice.

and hold the button.

Press <Options> and select Mute or Unmute

Call functions

Muting or sending key tones

Using Phonebook

You can turn the key tones off or on.

You can access the Phonebook menu to locate or

store entries.ꢀp. 48

Press <Options> and select Mute keys or Send

keys

Press <Options> and select Phonebook.

To communicate with answering machines or

computerised telephone systems, Send keys must

be selected.

Answering a second call

You can answer an incoming call, if your network

supports it and you have activated the call waiting

feature.ꢀp. 27

Sending a sequence of DTMF tones

1. Press [ ] to answer the call. The first call is

automatically put on hold.

Dual tone multi-frequency (DTMF) tones are the tones

used in phones for tone dialling.

2. Press <Swap> to switch between the calls.

You can send DTMF tones as a group after entering the

entire number you need to send or retrieving a

number from Phonebook. This feature is helpful for

entering a password or an account number when you

call an automated system, like a banking service.

3. Press <Options> and select End held call to end

the call on hold.

4. To end the current call, press [ ].

Making a multi-party call

1. When connected with a teleservice system, press

Options> and select Send DTMF

2. Enter the number you need to send and press

OK>.

Use this feature to allow as many as six people to join

a multi-party call, or conference call.

Your service provider must support multi-party calls

for you to use this feature.

Setting up a multi-party call

Dropping one participant

1. Call the first participant.

1. Press <Options> and select Select one.

2. Call the second participant. The first call is

automatically put on hold.

2. Select a name or number from the participant list.

3. Press [Down] and select Remove

3. Press <Options> and select Join. The first

The participant is dropped from the call, but the

call continues with the other parties.

participant is added to the multi-party call.

4. If desired, call another person or answer an

incoming call.

4. Close the phone or press [ ] to end the multi-

party call.

5. Press <Options> and select Join

6. Repeat steps 4 and 5 as desired.

Having a private conversation with one

participant

1. Press <Options> and select Select one

2. Select a name or number from the participant list.

3. Select Private

You can talk privately with that person, while the

other participants converse with each other.

4. To return to the multi-party call, press <Options

and select Join

Missed calls (Menu 2.1)

Menu functions

All menu options listed

This menu displays the 20 most recently received calls

that you did not answer.

SIM AT (Menu 1)

Received calls (Menu 2.2)

This menu is available if you use a SIM AT card that

provides additional services, such as news, weather,

sports, entertainment, and location services. Available

services may vary, depending on your service

provider’s plans.

This menu displays the 20 most recent calls you have

received.

Dialled calls (Menu 2.3)

This menu displays the 20 most recent calls you have

dialled.

For details, see your SIM card instructions or contact

your service provider.

Delete all (Menu 2.4)

Call records (Menu 2)

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls.

Use this menu to delete all of the records in each call

type.

1. Press [ ] to check the call type(s) to be cleared.

2. Press <Delete>.

To access this menu, press <Menu> in Idle mode and

3. Press <Yes> twice to confirm the deletion.

select Call records

Call time (Menu 2.5)

Call cost (Menu 2.6)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

•

Last call time: check the length of your last call.

•

Last call cost: check the cost of your last call.

Total sent: check the total length of all the calls

you have dialled.

Total cost: check the total cost of all of your calls

since your last reset the cost counter. If the total

cost exceeds the maximum cost set in Set max

cost, you must reset the counter before you can

make another call.

•

Total received: check the total length of all the

calls you have received.

Reset timers: reset the call timers. You need to

enter the phone password.

•

Max cost: check the maximum cost limit set in

The password is preset to 00000000. You can

Set max cost

change this password.ꢀp. 53

Reset counters: reset the cost counters. You

need to enter your PIN2.

Set max cost: set the maximum cost authorised

for your calls. You need to enter your PIN2.

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated. You need

to enter your PIN2.

Menu functions

3. To activate call diverting, select Activate

Otherwise, select Remove

Network services (Menu 3)

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

4. Enter the number to which calls are to be diverted

and press <OK>.

5. If you selected No reply, select the length of time

the network delays before diverting a call and

press <Select>.

To access this menu, press <Menu> in Idle mode and

select Network services

Call diverting (Menu 3.1)

Call barring (Menu 3.2)

This network service reroutes incoming calls to a

phone number that you specify.

This network service allows you to restrict your calls.

1. Select a call barring option:

1. Select a call diverting option:

•

All outgoing: prohibit all outgoing calls.

International: prohibit international calls.

International except to home: only allows

calls to numbers within the current country

when you are abroad, and to your home

country, defined as where your home network

provider is located.

•

Divert always: divert all calls.

Busy: diver calls when you are on another call.

No reply: divert calls when you do not answer

the phone.

•

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

•

All incoming: prohibit incoming calls.

•

Cancel all: cancel all call diverting options.

2. Select the type of calls to be diverted.

•

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

Network selection (Menu 3.4)

This network service allows you to either automatically

or manually select the network used when roaming

outside of your home area.

•

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

•

Automatic: connect to the first available network

when roaming.

2. Select the type of calls to be barred.

3. Press <Activate>. To deactivate call barring,

•

Manual: select the network you want.

press <Deactivate>.

4. Enter the call barring password supplied by your

Caller ID (Menu 3.5)

service provider and press <OK>.

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

Call waiting (Menu 3.3)

This network service informs you when someone is

trying to reach you while you are on another call.

•

Default: use the default setting provided by the

network.

1. Select the type of calls to which the call waiting

option will apply.

Hide number: ensure your number does not

display on the other person’s phone.

2. Press <Activate>. To deactivate call waiting,

press <Deactivate>.

Send number: send your number each time you

make a call.

Menu functions

Closed user group (Menu 3.6)

Band selection (Menu 3.7)

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group, contact your

service provider.

For the phone to make and receive phone calls, it

must register with an available network.

Your phone can handle any of the following types of

networks: GSM 1900 and Combined GSM 900/1800.

•

Index list: list, add, or delete CUG index

numbers. Press <Options> to access the options

for setting up an index list.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you must remember to change to an

appropriate band.

Outside access: enable calls to numbers other

than those in the Closed user group. This feature

depends on the nature of your CUG subscription.

When you select a new band, your phone

automatically searches for all available networks. Your

phone registers with a preferred network within the

band.

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

•

Deactivate: deactivate the CUG function, if the

default group is enabled or a CUG index is

selected.

•

Vibra+melody: the phone vibrates three times

and then starts ringing.

Sound settings (Menu 4)

Use this menu to customise various sound settings.

Keypad tone (Menu 4.4)

Ring tone (Menu 4.1)

Use this menu to select the tone that the phone

sounds when you press a key.

Use this menu to select a ring tone for the call ringer.

You can select one of the default ring melodies,

downloaded sounds, or the melodies you have

created.

You can adjust the keypad tone volume using

[ / ] in Idle mode.

Message tone (Menu 4.5)

Ring volume (Menu 4.2)

Use this menu to select a ring tone or alert type for

incoming messages.

Use this menu to adjust the ringer volume.

Alert type (Menu 4.3)

•

SMS tone: specify how you are informed of a new

SMS message.

Use this menu to specify how you are to be informed

of incoming calls.

SMS-CB tone: specify how you are informed of a

new cell broadcast (CB) message.

•

Light only: the phone flashes the service light.

MMS tone: specify how you are informed of a new

MMS message.

Melody: the phone rings using the selected ring

tone.

Repetition: specify how often the phone informs

you of a new message.

•

Vibration: the phone vibrates but not rings.

Menu functions

•

Connect tone: set the phone to beep when it is

connected to the system.

Folder tone (Menu 4.6)

Use this menu to select the tone that the phone

sounds when you open or close the phone.

Messages (Menu 5)

Power on/off (Menu 4.7)

Use the Messages menu to send and receive short

messages, and multimedia messages. You can also

use WAP push message, Voice mail, and Cell broadcast

message features.

Use this menu to select the melody that the phone

sounds when it is switched on or off.

Alert on call (Menu 4.8)

To access this menu, press <Menu> in Idle mode and

select Messages

Use this menu to select whether or not the phone

informs you when you receive a new message or when

the time for an alarm comes during a call.

Text messages (Menu 5.1)

Short Message Service (SMS) allows you to send or

receive text messages including pictures, audio clips,

and animated images.

Extra tones (Menu 4.9)

Use this menu to customise additional tones for the

phone.

The maximum number of characters allowed in a

short message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

•

Error tone: set the phone to beep when you make

a mistake.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

Create (Menu 5.1.1)

Inbox (Menu 5.1.2)

You can create and send a text message.

1. Enter your message.

You can view received text messages in this menu.

While viewing a message, press <Options> to access

the following options:

2. Press <Options> to access the following options:

•

Delete: delete the message.

Send: forward the message.

Text reply: reply to the sender.

Call back: call the sender.

•

Text formatting: change the text attributes.

Add content: add a sound, melody, picture, or

animation to the message.

Add templates: retrieve a text template.

Add emoticon: retrieve an emoticon.

Add from phonebook: add a Phonebook

entry.

Add from bookmarks: add a web page’s

address.

Language: change the language used in T9

input mode.

•

Save address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Move to phone: move the message from the SIM

card to the phone’s memory.

•

Move to SIM: move the message from the

phone’s memory to the SIM card.

Select content: save images or sounds from the

message into your phone.

3. Press <Options> and select Save and send or

Send only

4. If you select Save and send or Save only, select

a memory location.

5. Enter a destination number.

6. Press <OK> to send the message.

Menu functions

•

Send: send the template as an SMS message.

Outbox (Menu 5.1.3)

Delete: delete the template.

You can view sent or saved text messages.

While viewing a message, press <Options> to access

the following options:

Emoticon template (Menu 5.1.5)

You can preset emoticon templates and retrieve them

to write a message.

•

Delete: delete the message.

Send: forward the message.

While viewing the emoticon list, press <Options> to

access the following options:

Save address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Add: add a new emoticon.

•

Move to phone: move the message from the SIM

card to the phone’s memory.

Edit: edit the selected emoticon.

Send: send a message using the emoticon.

Delete: delete the emoticon.

Move to SIM: move the message from the

phone’s memory to the SIM card.

Settings (Menu 5.1.6)

Select content: save images or sounds from the

Use this menu to customise the SMS settings.

message into your phone.

The setting options available in this menu may vary

depending on your service provider.

Templates (Menu 5.1.4)

You can preset maximum 5 templates to write a text

message.

•

Setting x (where

is the setting group number):

each group has its own submenu.

While viewing the templates list, press <Options> to

access the following options:

Setting name: change the name of the setting

group.

•

Edit: edit the template.

Service center: store or changes the number of

your message centre.

Multimedia messages (Menu 5.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, picture, and sound,

from phone to phone or from phone to e-mail.

Default destination: store a default destination

number.

Default type: set the default message type.

Create (Menu 5.2.1)

Validity period: set the length of time your

messages are stored in the message centre while

the network attempts to deliver them.

You can create and send an MMS message.

1. Enter a message subject and press <Next>.

2. Press <Options> and add message contents using

•

Common setting: The following options are

available.

one of the following options:

•

Add text: add message text.

Reply path: allow the recipient to reply to you

through your message centre.

Add picture: add pictures to the message.

Add sound: add sounds to the message.

Send: send the message.

Save: save the message in the Draft or

Templates box.

Delivery reports: set the network to inform you

when your message has been delivered.

Bearer selection: select the GSM or GPRS

preferred bearer type.

•

Settings: change the message settings.

Add destination: enter destination numbers

or addresses.

Character support: select a character encoding

type. If you select Automatic, the phone switches

the encoding type from GSM-alphabet to Unicode if

you enter a Unicode character. Use of Unicode

encoding will reduce the maximum number of

characters in a message to about half.

•

Preview: view the message you created.

Menu functions

3. If you want to change the added items, highlight

one and press <Options> to access the following

options:

9. To enter additional numbers or addresses to other

destination types, press and repeat steps 6

through 8.

•

Edit text

picture, or sound.

picture

sound: edit the text,

10.When you have finished, select Send message.

Inbox (Menu 5.2.2)

•

Add page: add pages. Move to each page by

pressing the Left or Right key on the message

screen.

Delete: delete the item from your message.

Duration: set how long one page displays.

After the specified time, the display

automatically scrolls to the next page.

This menu displays MMS messages that you have

received. The following icons tell you the message

status:

•

notification that you have read

notification that you have not read

you are retrieving from the server

the server is processing your request

the server is failed to send

you have read

4. When you have finished, select Send from the

options.

5. Select a destination type (To, Cc, Bcc).

6. Select one of Phone number

E-mail, or

you have not read

Phonebook

When you select a notification, you can access

Retrieve to retrieve the message from the MMS

server.

7. Enter a destination number or an e-mail address,

or select a number from Phonebook.

8. To add more destinations, select Add destination

and repeat from step 7.

While viewing a message, press <Options> to access

the following message options:

•

to be sent

deferred

•

Delete: delete the message.

Reply: reply to the sender.

Callback: call the sender.

While viewing a message, press <Options> to access

the following options:

•

Delete: delete the message.

Save address: extract URLs, e-mail addresses, or

phone numbers from the message.

Save address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Forward: forward the message to another person.

•

Send: send or resends the message.

Edit: edit the message.

Save picture: save an image from the message

into the Images folder.

Properties: view the message properties.

•

Save sound: save a sound from the message into

the Sounds folder.

Draft (Menu 5.2.4)

After creating a multimedia message, you can store it

in this message box for sending later.

Properties: view the message properties.

Outbox (Menu 5.2.3)

You can view a message and use the options the same

as in the Outbox.

This menu displays MMS messages that you have

sent. The following icons tell you the message status:

•

currently being sent

sent

your phone couldn’t send

Menu functions

•

Validity period: set the length of time your

messages are stored in the message centre.

Templates (Menu 5.2.5)

This menu stores messages you saved as templates so

that you can use them to create new messages.

Delivery time: set the time delay before

messages are sent.

While viewing a message template, press <Options

to access the following options:

•

Priority: set the priority level of your messages.

Report allowed: send a delivery report from the

network to the sender.

•

Edit: send the message using the template.

Delete: delete the template.

•

Page duration: set how long one page in your

outgoing messages displays. After a specified time,

the display automatically scrolls to the next page.

Settings (Menu 5.2.6)

You can customise the settings for sending and

receiving MMS messages.

MMS profile (Menu 5.2.7)

•

Delivery report: set the network to inform you

when your message has been delivered.

You can configure required network settings for MMS.

The last profile accessed is automatically activated for

sending or receiving subsequent messages.

•

Read reply: request a reply from the recipient.

Auto download: set whether or not your phone

retrieves new incoming messages from the MMS

server without notifications.

Check with your service provider before you change

any MMS settings on your phone.

•

Message acceptance: select the category of

messages you want to receive.

•

Profile name: assign a name to the MMS profile.

Connection URL: enter the address of your MMS

server.

Hide ID: hide your phone number on the

recipient’s phone.

•

Security: select a data transmission mode.

IP address: enter the gateway address.

User name: assign the user ID.

Delete all (Menu 5.4)

Use this menu to delete all of the messages in each

message box.

Password: enter the password.

1. Select a message type.

APN: enter the access point name used for the

address of the MMS server.

2. Press [ ] to check the message box(es) to be

cleared.

3. Press <Delete>.

Push messages (Menu 5.3)

4. Press <Yes> twice to confirm the deletion.

Use this menu to access messages from the WAP

server.

Voice mail (Menu 5.5)

•

Inbox: display push messages you have received.

Use this menu to store the number of the voice mail

server and access your voice mails.

Receive: determine whether or not your phone

receives push messages.

You must enter the voice server number before you

can access your voice mails. Your service provider

can give the voice server number.

Never: the phone rejects push messages.

Always: the phone receives push messages from

the service centre set in this option.

•

Connect to voice server: connect to the voice

server to allow you to listen to your messages. You

can also connect to the voice mail server by

•

Delete all: delete all of push messages.

pressing and holding [1] in Idle mode.

Voice server number: change the voice mail

server name or number.

Menu functions

Broadcast messages (Menu 5.6)

Memory status (Menu 5.7)

The Cell Broadcast service delivers short messages on

various topics such as the weather or traffic.

Use this menu to view the total number of messages

you can store and the number of messages you have

stored on the SIM card, in the phone’s memory, and in

the CB memory.

Use this menu to change the settings for the service

and access broadcast messages.

•

Read: open received messages.

Funbox (Menu 6)

The Volatile box saves network messages until

The Funbox menu allows you to use the WAP browser,

play Java games, and access images and sounds

stored in the phone’s memory.

the phone is switched off.

The Archive box saves network messages

indefinitely. Press <Options> and select Save

when a text notification appears. The message is

saved in the Archive box.

To access this menu, press <Menu> in Idle mode and

select Funbox

•

Receive: enable or disable the reception of

broadcast messages.

WAP browser (Menu 6.1)

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

Using the WAP browser, you can access updated

information and a wide variety of media content, such

as wallpapers and ring tones.

Channel list: specify the channels from which you

receive broadcast messages.

Language: select the language in which broadcast

messages display.

Please contact your service provider for details.

•

Go to URL: enter a URL address manually.

Show URL: view the URL address of the

current web page.

Clear cache: delete information stored in the

cache.

Security info: view security information.

Inbox: read messages received from a web

server.

Show image: view the image on the current

web page in order.

Home (Menu 6.1.1)

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

provider. You can also press [ ] in Idle mode.

•

Navigating with the WAP browser

•

Press

scroll through browser items

select a browser item

return to the previous page

return to the homepage

[Up] or [Down].

[ ].

•

[C].

Exiting the WAP browser

Press [ ] to exit the browser.

<Menu> and

select Home

Bookmarks (Menu 6.1.2)

Use this menu to save URL addresses to quickly access

a website.

Selecting and using browser menu options

1. Press <Menu> and select a menu.

Adding a bookmark

2. Select one of the following browser options:

1. Select an empty location.

•

Bookmarks: open the bookmarks list.

Reload: reload the current page.

Home: go back to the homepage.

2. Enter a URL address and press <Enter>.

3. Enter a name for the bookmark and press

<Enter>.

Menu functions

Accessing a bookmarked page

•

Security: select a data transmission mode.

Bearer: select a bearer for each type of network

Scroll to a bookmark item and press [ ].

address accessed; GPRS or Data

Using bookmark options

When the bearer is set to GPRS

After saving an item, press <Options> to access the

following options:

•

IP address: enter the WAP gateway address.

User name: enter the user ID.

•

Go to URL: access the website.

Password: enter the password.

Edit: edit the address and name of the bookmark.

Delete: delete the bookmark.

APN: enter the access point name of the GPRS

network gateway.

http:// (Menu 6.1.3)

When the bearer is set to Data

Use this menu to manually enter the URL address of a

website and access the website.

•

IP address: enter the WAP gateway address.

WAP profiles (Menu 6.1.4)

Password: enter the password.

Use this menu to set up servers for the WAP browser.

Contact your service provider for details about your

settings options.

Dial-up number: enter the PPP server phone

number.

•

Data call type: select a data call type.

For each server, the following options are available:

Clear cache (Menu 6.1.5)

•

Profile name: assign a name to the server profile.

Use this menu to clear the cache, which is the

temporary memory that stores the web pages you

have recently accessed.

Homepage URL: set the address of your

homepage.

Viewing MIDlet information

Games (Menu 6.2)

Scroll to the MIDlet you want and press <Info>.

You can download MIDlets (Java applications that run

on mobile phones) from various sources using the

WAP browser, and store them in your phone.

DNS settings

You may need to change the DNS setting of the Java

server at your service provider’s instructions.

Java services may not available, depending on your

service provider.

1. Select Setting on the Games list.

Launching a MIDlet

1. Select the MIDlet you want on the games list.

2. Enter the primary address and press <OK>.

3. Enter the secondary address and press <OK>.

2. On the startup screen of the MIDlet, you can

access the following options:

Sounds (Menu 6.3)

•

START GAME: start a new game.

CONTINUE: continue the last game you

played.

This menu displays sounds downloaded from the

wireless web or received in messages.

While accessing a sound, press <Options> to access

•

HIGH SCORE: view the high score table. This

option may not be available for some games.

HOW TO PLAY: view how to play the game

and the key functions for the game.

OPTION: switch on or off the game sound.

the following options:

•

Rename: change the name of the sound.

Delete: delete the sound.

Set as ringtone: set the sound as your ring tone.

3. Press [ ] to confirm your selection.

Menu functions

Images (Menu 6.4)

Melody composer (Menu 6.7)

This menu displays images downloaded from the

wireless web or received in messages.

Use this menu to compose your own melodies using a

variety of musical components. You can set one of

your melodies as your call ringer.

While accessing an image, press <Options> to access

the following options:

Compose melody (Menu 6.7.1)

•

Rename: change the name of the image.

When you access the Compose melody menu, a

stave screen displays with a selection point at the first

note position (Do).

Delete: delete the image.

Set as wallpaper: set the image as your

wallpaper for the idle screen.

Creating a melody

1. Move the selection point up or down by pressing

[Up] or [Down].

Delete all (Menu 6.5)

You can delete all of the downloaded items in the

2. Press <Input>.

Games Sounds, and Images folders.

3. Select a note or rest.

1. Press [ ] to check the folder(s) to be cleared.

2. Press <Delete>.

4. Repeat steps 1 to 3 to add more notes and rests.

5. When you have finished, press <Options> and

3. Press <Yes> twice to confirm the deletion.

select Save

6. Enter a melody name and press <OK>.

Memory status (Menu 6.6)

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

Editing a melody

5. Press <Options> and select Save to save the

changes to the melody, or Save as to save the

melody as a different name.

While composing a melody or after opening a saved

melody, you can edit it.

Using composer options

1. To change an entered note or rest, move the

selection point by pressing [Up] or [Down].

While composing a melody, press <Options> to

access the following options:

2. Change the position of the note or type of the note

or rest the same as you would when inserting it.

•

New: open a new composer screen.

Open: open the list of your own melodies.

Play: play back the current melody.

Save: save the melody.

3. Press [ ] or [ ] to move a note to the next

semitone higher position or lower position.

You can access the following options by pressing

<Options>:

Save as: save the melody as a different name.

•

Range: select more than one note or rest. The

selected ones are indicated in yellow.

Copy: copy the note or rest.

Cut: cut the note or rest.

Paste: paste the note or rest.

Change: change the note or rest.

Delete: delete the note or rest.

Play: play back the current melody.

Instrument: change the musical instrument to be

used for playing the melody.

•

Background melody: use the background

melody.

•

Add note: add notes in different chord.

Tempo: change the tempo for the melody.

Volume: adjust the volume level of the main and

background melodies separately.

4. After editing, press [Right] until the selection point

moves to an input position.

Menu functions

3. Select AM or PM in 12-hour time format.

Memory status (Menu 6.7.2)

Your phone is preset to a 24-hour format. You

You can check the total amount of memory and the

amount of memory currently in use for the melodies

you have created.

can change the time format.ꢀp. 46

4. If you selected Morning call in step 1, choose

Monday to friday or Monday to saturday

Organiser (Menu 7)

Stopping an alarm

The Organiser feature enables you to keep track of

your schedule and tasks, and to make a voice memo.

You can also set the time and date and use convenient

features, such as alarms, calculator, and currency

converter.

When the alarm sounds, press any key.

To remove an alarm set, access it, press <Options

and select Remove alarm

To remove all alarm sets, select Remove alarm from

the Alarm menu.

To access this menu, press <Menu> in Idle mode and

select Organiser

Setting the alarm to ring even if the phone is

off

Alarm (Menu 7.1)

From the Alarm screen, select Autopower

→

Enable.

Use this menu to set alarms to ring at a specific time.

If the phone is off when it is time for the alarm to ring,

the phone switches on and sounds the alarm.

Setting an alarm

1. Select the type of alarm.

2. Enter the time for the alarm to sound.

Viewing a memo

Calendar (Menu 7.2)

On the calendar screen, press <Options> to access

the following options:

Use this menu to consult the calendar, write memos,

or set alarms to act as a reminder.

•

Search all: view all of the memos you created.

Delete all: delete all memos.

Writing a memo

1. Select a date on the calendar.

Go to date: go to a specific date.

Exit: exit the Calendar feature.

Press [ / ] to move to the next or previous

month.

While viewing a memo, press <Options> to access

the following options:

2. Enter your memo and press <OK>.

3. Press [ ] to set an alarm to ring on the chosen

day.

•

New: add a new memo.

Edit: edit the memo.

Otherwise, press <Skip>.

Alarm: set an alarm for the memo.

Delete: delete the memo.

4. Enter the time for the alarm.

To select an alarm melody, press <Melody>.

5. Select AM or PM in 12-hour format.

Your phone is set to a 24-hour format. You can

Copy to: copy the memo to another date.

Move to: change the date of the memo.

change the format.

ꢀp. 46

The colour of the date on the calendar changes to

green to indicate that a memo exists for that date.

Menu functions

Time & date (Menu 7.3)

Calculator (Menu 7.4)

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

Use this menu to perform basic arithmetic functions

such as addition, subtraction, multiplication, and

division.

specify your time zone in World time

•

Set time: enter the current time using the number

keys.

1. Enter the first number.

Press the left soft key to insert a decimal point and

a bracket.

Set date: enter the current date using the number

keys.

Press

[

] or [ ] to move the cursor.

World time: set your local time zone and find out

what time it is in another part of the world.

2. Press the Navigation keys to access the math

function you want.

To apply Daylight Savings Time to a time zone,

press <Options

saving time

and select Set daylight

3. Enter the second number.

4. Press [ ] to view the result.

•

Time format: select 12-hour or 24-hour time

format.

To do list (Menu 7.5)

Use this menu to create tasks and manage them.

Creating the To do list

1. Press <New>.

2. Enter the first task and press <OK>.

3. Select a priority level.

•

Delete: delete the task.

4. Enter your deadline and press [ ].

Otherwise, press <Skip>.

Delete all: delete all tasks.

Exit: exit the To do list menu.

Viewing the To do list

Voice memo (Menu 7.6)

When you select the To do list menu, the tasks display

with a check mark, if the task has been done, and a

priority level indicator;

and for Low.

To change the status of a specific task, press [

Use this menu to record voice memos. A voice memo

can be up to 30 seconds.

for High,

for Normal,

Record voice (Menu 7.6.1)

1. Press <Record> to start recording.

2. Speak into the microphone.

]

While viewing a task from the list or the details for the

task, press <Options> to access the following

options:

3. When you press <Stop>, or if the recording time

expires, the following options display:

•

Replay: play back your memo.

Re-record: discard the memo and records

another one.

•

New: add a new task.

Mark: change the status of the task.

Edit: edit the task.

•

Save: save the memo.

Quit: cancel your recording and exits the

Record voice menu.

Sort: sort the task by priority or status.

Copy: copy the task.

4. Select Save to save the voice memo.

Copy to calendar: copy the task to the calendar

as a memo.

5. Enter a name of the voice memo and press <OK>.

Menu functions

Voice list (Menu 7.6.2)

Currency exchange (Menu 7.7)

Use this menu to access the list of voice memos you

have recorded.

Use this menu to do currency conversions.

1. Enter the rate of foreign currency and press

Press <Options> to access the following options:

<OK>.

•

Play: play back your voice memo.

2. Enter the amount of the source currency you want

to convert and press <OK>.

Send: send the voice memo via MMS.

Rename: change the name of the voice memo.

The amount you entered and its equivalent value

in the foreign currency display.

Properties: view the properties of the voice

memo.

Phonebook (Menu 8)

•

Delete: delete the voice memo.

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

Delete all (Menu 7.6.3)

Use this menu to delete all of the voice memos you

have recorded at one time.

Memory status (Menu 7.6.4)

To access this menu, press <Menu> in Idle mode and

select Phonebook

You can check the total amount of memory and the

amount of currently in use for voice memos.

Press <Phonebook> in Idle mode to quickly access

this menu.

Search (Menu 8.1)

Add entry (Menu 8.2)

Use this menu to search for numbers in Phonebook.

Use this menu to add a new entry to Phonebook.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

Storing a number or an e-mail address in the

phone’s memory

1. Select a number type.

2. Select Phone

2. Select the name you want from the list.

3. Enter a name and press <OK>.

3. Press [ ] to dial the number, or <Options> to

access the Phonebook options.

4. Enter a number or an e-mail address and press

<Save>.

Using Phonebook options

5. Change the location number, if you want, and

While viewing an entry in Phonebook, press

press <OK>.

<Options> to access the following options:

Storing a number on the SIM card

•

Edit: edit the entry information.

1. Select a number type.

•

Copy: copy the number to the phone’s memory or

SIM card.

2. Select SIM

•

Paste: paste the number into the normal dialling

mode.

3. Enter a name and press <OK>.

4. Enter a number and press <Save

•

Delete: delete the number from Phonebook.

Caller group: assign a caller group.

Add entry: add a new entry.

5. Change the location number, if you want, and

press <OK>.

Menu functions

Group search (Menu 8.3)

Speed dial list (Menu 8.5)

Use this menu to search your entries in Phonebook in

caller groups.

Use this menu to assign speed dial numbers (2 to 9) to

eight of your most frequently called numbers.

1. Enter the first few letters of the group name.

2. Select a group and press <View>.

3. Select the name you want.

Assigning speed dial entries

1. Select a key location from

for your voice mail server.

9. Key

is reserved

4. Press [ ] to dial the number or <Options> to

2. Select the name you want from the Phonebook list.

3. Select the number you want.

access the Phonebook options.

Managing speed dial entries

Group edit (Menu 8.4)

While viewing the Speed dial screen, press

Use this menu to edit your caller groups’ properties.

<Options> to access the following options:

From the group list, press <Options> to access the

following options:

•

Change: assign a different number to an assigned

key.

•

Call ringtone: set a ring tone for incoming calls

from the group.

•

Delete: delete the setting for the key.

Delete all: delete the settings for all the keys.

Number: view the number assigned to the key.

SMS tone: set a ring tone for incoming messages

from the group.

Graphic: set a graphic icon for incoming calls from

the group.

Dialling speed dial entries

Press and hold the appropriate key in Idle mode.

Group name: assign a name to the group.

Delete all (Menu 8.6)

Phone settings (Menu 9)

Use this menu to delete all of the entries from

Phonebook.

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

1. Press [ ] to check the location(s) to be cleared.

2. Press <Delete>.

To access this menu, press <Menu> in Idle mode and

select Phone settings

3. Enter the phone password and press <OK>.

4. Press <Yes> twice to confirm the deletion.

Display settings (Menu 9.1)

Use this menu to change settings for the display and

light.

Memory status (Menu 8.7)

Use this menu to check the total number of entries

you can store and the number of the entries you have

stored in Phonebook.

Wallpaper (Menu 9.1.1)

You can change the background image and the

settings for the text of Idle mode.

•

Wallpaper list: select a background image.

Text display: determine the phone displays the

time and date.

•

Text color: select a colour of the text

Menu style (Menu 9.1.2)

You can select the menu display style.

Menu functions

Back light (Menu 9.1.3)

Greeting message (Menu 9.2)

You can select the length of time the backlight and the

display stay.

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

•

Back light On: select the length of time the

backlight is on.

Own number (Menu 9.3)

•

Back light Dim: select the length of time the

display is in Dimming mode after the backlight

turns off. After a specified time, the display turns

off and the clock displays.

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

Contrast (Menu 9.1.4)

Language (Menu 9.4)

You can adjust the brightness of the display for

varying lighting conditions.

Use this menu to select one of several languages for

the display text.

Service light (Menu 9.1.5)

You can select whether or not the service light is used.

You can also select a colour in which it flashes.

Security (Menu 9.5)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

Graphic logo (Menu 9.1.6)

Use this menu to display your service provider’s logo

instead of its name.

The password is preset to 00000000. To change the

password, use the Change password menu.

If you enter an incorrect PIN /PIN 2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

network operator.

Change Password (Menu 9.5.4)

Use this menu to change your phone password. The

password is preset to 00000000

PIN check (Menu 9.5.1)

Privacy (Menu 9.5.5)

The 4-to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

Use this menu to lock your media contents, including

MMS messages, voice memos, images, and sounds.

1. Press [ ] to check the item(s) to be locked.

2. Press <OK> to lock the marked items.

3. Enter the phone password and press <OK>.

Change PIN (Menu 9.5.2)

Use this menu to change your PIN. The PIN Check

feature must be enabled to use this feature.

To access a locked item, you need to enter the phone

password.

Phone lock (Menu 9.5.3)

SIM lock (Menu 9.5.6)

The Phone lock feature locks the phone from

unauthorised use.

The SIM lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

Menu functions

FDN mode (Menu 9.5.7)

Short cut (Menu 9.7)

If supported by your SIM card, Fixed Dialing Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored in

Phonebook. To use this feature, you must enter your

PIN2.

You can use the Navigation keys as shortcut keys to

access specific menus directly from Idle mode. Use

this menu to change the shortcut assignments for the

Up or Down key.

1. Select the key to be used as a shortcut key.

2. Scroll to the menu that will be assigned to the key.

3. Press <Select>.

Change PIN2 (Menu 9.5.8)

If supported by your SIM card, the Change PIN2

feature changes your current PIN2.

Reset settings (Menu 9.8)

Use this menu to reset the phone to its default

settings.

Extra settings (Menu 9.6)

You can turn the automatic redialing or answering

features on or off.

Enter the 4- to 8-digit phone password and press

OK>.

The password is preset to 00000000. You can

change this password. p. 53

•

Auto redial: make up to ten attempts to redial a

phone number after an unsuccessful call.

ꢀ

Active folder: answer an incoming call simply by

opening the phone.

Anykey answer: answer an incoming call by

pressing any key, except [ ] or <Reject>.

When this option is set to Off, you must press [

]

or <Accept> to answer a call.

“Enter PUK”

The PIN code has been entered incorrectly three

Solve problems

•

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

“No Service,” “Network Failure,” or “Not

Done” displays

When you switch on your phone, the following

messages may appear:

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

“Insert SIM card”

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

•

Be sure that the SIM card is correctly installed.

“Phone locked enter password”

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

You have entered a number but it was not

dialled

•

Be sure that you have pressed [ ].

“Enter PIN”

Be sure you have accessed the right cellular

network.

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

Be sure that you have not set an outgoing call

barring option.

•

The PIN Check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Solve problems

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

Your correspondent cannot reach you

•

Be sure your phone is switched on. ([ ] pressed

for more than one second.)

No number is dialled when you re-call a

Contacts entry

•

Be sure you are accessing the correct cellular

network.

Use the Phonebook Search feature to ensure the

number has been stored correctly.

Be sure that you have not set an outgoing call

barring option.

•

Re-store the number, if necessary.

Your correspondent cannot hear you speaking

If the above guidelines do not help you to

solve the problem, take note of:

•

Be sure you have switched off the microphone.

•

The model and serial numbers of your phone

Your warranty details

Be sure you are holding the phone close enough to

your mouth. The microphone is located at the

bottom of the phone.

A clear description of the problem

The phone starts beeping and “Battery low”

flashes on the display

Then contact your local dealer or Samsung after-sales

service.

•

Your battery is insufficiently charged. Recharge the

battery.

The audio quality of the call is poor

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

•

(

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0W/

kg.^*

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

The highest SAR value for this model phone was 0.455 W/kg.

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body tis-

sue. The limit incorporates a substantial margin of safety to

give additional protection for the public and to account for any

variations in measurements. The SAR values may vary,

depending on national reporting requirements and the network

band.

Health and safety information

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged. Li-

ion batteries are particularly affected by temperatures

below 0°C (32°F).

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

Road safety

Electronic devices

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

When driving a car, driving is your first responsibility.

When using your wireless phone while driving, follow local

regulations in the country or region you are in.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Hearing aids

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel.

Health and safety information

Other medical devices

Potentially explosive environments

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

Your physician may be able to assist you in obtaining this

information.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Emergency calls

Other important safety information

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

•

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

•

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

3. Press [ ].

•

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

Health and safety information

•

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Care and maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep the phone and all its parts and accessories out of

the reach of small children.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

•

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Call records

dialled • 24

missed • 24

received • 24

Call time • 25

Caller ID • 27

Calls

phone • 53

SIM card • 53

Low battery indicator • 8

Index

ABC mode, text input • 17

Alarm • 44

Alert 29, 30

Emergency calls • 61

Extra 30

Memory status

camera • 38

downloaded items • 42

Message tone • 29

Messages

FDN (Fixed Dial Number) mode

• 54

Folder 30

Answering

answering • 20

barring • 26

holding • 21

redialling • 19

rejecting • 20

call • 20

second call • 22

Anykey answer • 54

Auto redial • 54

Greeting message • 52

cell broadcast • 38

SMS • 30

voice • 37

Holding, call • 21

waiting • 27

web • 37

Backlight time, set • 52

Band 28

CB (Cell Broadcast) messages •

Characters, enter • 17

Closed 28

Minute minder • 30

Missed calls • 24

MMS messages

creating/sending • 33

deleting • 35

Icons, description • 10

Images, downloaded • 42

International calls • 19

Internet • 38

Band selection • 28

Barring, calls • 26

Battery

Connection tone • 30

charging • 7

setting • 36

low indicator • 8

precautions • 58

Broadcast messages • 38

Browser, WAP • 38

Delete 24

viewing • 34, 35

Multi-party calls • 22

Muting

Keypad 29

Keypad tones

sending • 22

Deleting

call records • 24

Delivery reports, message • 36

Dialled calls • 24

Display

settings • 51

DTMF tones, send • 22

key tones • 22

microphone • 21

Calculator • 46

Call 24

Language, select • 52

Last number, redial • 19

Locking

Names

Call costs • 25

Index

entering • 17

searching • 49

editing • 49

options • 49

locking • 53

SMS messages

Voice memos

recording • 47

Network band, select • 28

Network selection • 27

Network services • 26

speed-dialling • 50

PIN, change • 53

PIN2, change • 54

Power 30

Privacy • 53

creating/sending • 31

viewing • 31

Sound 29

Sound settings • 29

Sounds, downloaded • 41

Speed-dial • 50

Switching 21

Switching on/off

microphone • 21

phone • 8

Voicemail server • 37

Waiting call • 27

WAP browser

access • 38

Organiser • 44

Outbox, messages

MMS • 35

bookmarks • 39

cache, clear • 40

World time • 44

Received calls • 24

Recording

voice memos • 47

Redialling

automatically • 54

manually • 19

Resetting phone • 54

Ring 29

SMS • 32

Own number • 52

Password

Templates

call barring • 27

phone • 53

Phone

MMS • 35

Text input mode, change • 17

Text, enter • 17

Tone

Road safety • 59

care and maintenance •

display • 10

icons • 10

connect • 30

keypad • 29

message • 29

minute minder • 30

power on/off • 30

Security, calls • 52

Sent messages

MMS • 34, 35

SMS • 32

SIM 24

SIM card

locking • 53

switching on/off • 8

unpacking • 6

Phonebook

copying • 49

inserting • 7

Voice mail • 37

Tascam CD RW900 User Manual
Sony WALKMAN WM FX121 User Manual
Sony CDX L490EE User Manual
Snapper "MR" SERIES 17 WMR216517B User Manual
Silicon Image SiliconDrive SSD D16G(I) 3600 User Manual
Seagate ULTRA ATA ST320423A User Manual
Samsung 840 EVO MZ 7TE250BW 250 GB 25 MZ7TE1T0BW User Manual
Radio Shack 65 792 User Manual
Philips AJ3330 User Manual
Pelco Computer Drive C2616M (6 User Manual