Samsung GH68 05956A User Manual

* Some of the contents in this manual may differ from your  
phone, depending on the software installed or your service  
provider.  
ELECTRONICS  
Printed in Korea  
Code No.: GH68-05956A  
English. 09/2004. Rev. 1.0  
World Wide Web  
http://www.samsungmobile.com  
Contents  
Important safety precautions ...................... 7  
Your phone ................................................ 10  
Phone layout...................................................... 10  
Displays............................................................ 13  
External display.................................................. 16  
Built-in antenna ................................................. 17  
Inserting/Removing the SIM card ......................... 18  
Installing/Removing/Charging the battery.............. 19  
Switching the phone on or off............................... 23  
Selecting functions and options ............................ 24  
Making a call...................................................... 26  
Ending a call...................................................... 29  
Answering a call................................................. 29  
Rejecting a call................................................... 29  
Adjusting the volume.......................................... 30  
Accessing options during a call ............................. 31  
Using the ear-microphone.................................... 38  
Entering text.............................................. 39  
Changing the text input mode.............................. 40  
Using Chinese Pinyin mode .................................. 41  
Using Chinese stroke modes ................................ 43  
Using Quick English mode.................................... 46  
Using English mode ............................................ 48  
Using number mode............................................ 50  
Using symbolic mode .......................................... 50  
Using the menus ........................................ 51  
Accessing a menu function................................... 51  
List of menu functions......................................... 52  
3
Contents  
Find name (Phonebook 1.1)..................................... 58  
Add entry (Phonebook 1.2)...................................... 61  
Speed-dial list (Phonebook 1.3)............................... 62  
Copy all to phone (Phonebook 1.4) .......................... 64  
Delete all (Phonebook 1.5) ...................................... 65  
Own number (Phonebook 2.1)................................. 65  
Group setting (Phonebook 2.2)................................ 66  
Memory status (Phonebook 2.3) .............................. 67  
Service directory (Phonebook 3.1) ........................... 67  
Short message (Menu 1.1)...................................... 68  
Multimedia message (Menu 1.2).............................. 74  
Voice mail (Menu 1.3)............................................. 85  
Preset messages (Menu 1.4)................................... 86  
Broadcast (Menu 1.5)............................................. 87  
Settings (Menu 1.6)................................................ 88  
Memory status (Menu 1.7)...................................... 91  
Call records................................................ 93  
Missed calls (Menu 2.1) .......................................... 93  
Received calls (Menu 2.2) ....................................... 93  
Dialled calls (Menu 2.3) .......................................... 94  
Delete all (Menu 2.4).............................................. 94  
Call time (Menu 2.5)............................................... 95  
Call costs (Menu 2.6).............................................. 96  
Sound settings........................................... 97  
Incoming calls (Menu 3.1) ...................................... 97  
Messages (Menu 3.2).............................................. 98  
Power on/off (Menu 3.3)......................................... 99  
Connection tone (Menu 3.4).................................... 99  
Key tone (Menu 3.5)............................................... 99  
Minute minder (Menu 3.6) .................................... 100  
Quiet mode (Menu 3.7)......................................... 100  
Alerts on call (Menu 3.8)....................................... 101  
4
Greeting message (Menu 4.1) ............................... 102  
Display (Menu 4.2)............................................... 102  
Language (Menu 4.3) ........................................... 104  
Security (Menu 4.4).............................................. 104  
Auto redial (Menu 4.5).......................................... 108  
Active folder (Menu 4.6) ....................................... 108  
Side key (Menu 4.7)............................................. 108  
Anykey answer (Menu 4.8) ................................... 109  
Reset settings (Menu 4.9)..................................... 109  
New memo (Menu 5.1)......................................... 110  
Calendar (Menu 5.2)............................................. 112  
To do list (Menu 5.3) ............................................ 115  
Clock (Menu 5.4).................................................. 116  
Alarm (Menu 5.5)................................................. 118  
Calculator (Menu 5.6)........................................... 120  
Conversion (Menu 5.7) ......................................... 120  
Timer (Menu 5.8) ................................................. 122  
Stopwatch (Menu 5.9) .......................................... 123  
Network services ..................................... 124  
Call diverting (Menu 6.1) ...................................... 124  
Call barring (Menu 6.2)......................................... 126  
Call waiting (Menu 6.3)......................................... 128  
Network selection (Menu 6.4)................................ 129  
Caller ID (Menu 6.5)............................................. 130  
Active line (Menu 6.6) .......................................... 130  
Fun box.................................................... 131  
WWW Services (Menu 7.1).................................... 131  
Media box (Menu 7.2)........................................... 138  
JAVA world (Menu 7.3) ......................................... 140  
5
Contents  
Using ALS (Alternate Line Service) .......... 144  
Solving problems ..................................... 146  
Access codes............................................ 149  
Phone password............................................... 149  
PIN................................................................. 149  
PIN2............................................................... 150  
PUK................................................................ 150  
PUK2 .............................................................. 151  
Call barring password........................................ 151  
Health and safety information.................. 152  
SAR certification information.............................. 152  
Precautions when using batteries........................ 153  
Road safety ..................................................... 155  
Operating environment ..................................... 155  
Electronic devices............................................. 156  
Potentially explosive atmospheres....................... 157  
Emergency calls ............................................... 158  
Other important safety information..................... 159  
Care and maintenance ...................................... 160  
Glossary................................................... 162  
Quick Reference Card............................... 167  
6
Important safety  
precautions  
Read these guidelines before using your wireless  
phone. Failure to comply with them may be  
dangerous or illegal.  
Road safety at all times  
Do not use a hand-held phone while driving; park  
the vehicle first.  
Switching off when refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Switching off in aircraft  
Wireless phones can cause interference. Using them  
in aircraft is both illegal and dangerous.  
Switching off in hospitals  
Switch off your phone near the medical equipment.  
Hospitals or health care facilities may be using  
equipment that could be sensitive to external RF  
energy. Follow any regulations or rules in force.  
Interference  
All wireless phones may be subject to interference,  
which could affect their performance.  
Special regulations  
Meet any special regulations in force in any area and  
always switch off your phone whenever it is  
forbidden to use it, or when it may cause  
interference or danger (in a hospital for example).  
Water resistance  
Your phone is not water-resistant. Keep it dry.  
7
 
Important safety precautions  
Sensible use  
Use only in the normal position (held to the ear).  
Avoid unnecessary contact with the antenna when  
the phone is switched on, especially when the phone  
is in service.  
Emergency call  
Key in the emergency number for your present  
location, then press the  
key. Give all the  
necessary information as accurately as possible. Do  
not cut off the call until given permission to do so.  
Keeping small children away from your phone  
Keep the phone and all its parts including  
accessories out of the reach of small children.  
Accessories and batteries  
Use only Samsung-approved accessories. Use of any  
unauthorised accessories could damage your phone  
and may be dangerous.  
Use only Samsung-approved batteries and recharge  
your battery only with Samsung-approved chargers.  
Qualified service  
Only qualified service personnel may install or repair  
your phone.  
For more detailed safety information, see “Health  
and safety information” on page 152.  
CAUTION  
RISK OF EXPLOSION IF A BATTERY IS REPLACED  
BY AN INCORRECT TYPE.  
DISPOSE OF USED BATTERIES ACCORDING  
TO THE INSTRUCTIONS.  
8
Unpacking  
Your package contains the following items:  
Travel Adapter  
Owner’s Manual  
Phone  
Battery  
In addition, you can obtain the following  
accessories for your phone from your local  
Samsung dealer:  
• Standard battery  
Travel adapter  
• Simple hands-free car kit  
• PC data link kit  
• Hand/Finger strap  
Notes  
:
• This items supplied with your phone and available  
accessories may be different, depending on your  
country or service provider.  
• Use only Samsung-approved headset in order to get  
best sound quality. If you use other products, it may  
make much more noise than Samsung’s headset.  
9
 
Your phone  
Phone layout  
The following illustrations show the main elements  
of your phone:  
Open view  
Earpiece  
Folder  
Main display  
Navigation keys  
(Up/Down/Left/  
Right)  
Soft key (left)  
Soft key (right)  
Ear micro-  
phone jack  
WAP Browser  
key  
Volume/Menu  
browse keys  
Power on/off /  
Menu exit key  
Dial/Menu  
confirmation key  
Alphanumeric  
keys  
Cancel/Back/  
Correction key  
Microphone  
Special  
function keys  
Charger connector  
10  
   
Your phone  
Keys  
Key(s)  
Description  
Perform the functions indicated by the  
text above them, on the bottom line of  
the display.  
(soft keys)  
In menu mode, scroll through the menu  
options and the phonebook memory.  
In idle mode, the Left key accesses the  
new SMS message writing screen  
(
Menu 1.1.2), the Right key accesses  
the Incoming call melody setting menu  
Menu 3.1) and the Up key accesses  
(
the calendar menu (Memu 5.2). The  
Down key accesses the Java world menu  
(Memu 7.3).  
In idle mode, launches the WAP  
(Wireless Application Protocol) browser  
directly.  
Initiates or answers a call.  
In idle mode, accesses the call log list.  
In menu mode, selects a menu function  
or stores information that you have  
entered, such as a name in the phone or  
SIM memory.  
Deletes characters from the display.  
When pressed and held in idle mode,  
quickly accesses the new memo menu  
(menu 5.1). In menu mode, returns to  
previous screen.  
11  
Your phone  
Key(s)  
Description (continued)  
Ends a call.  
When pressed and held, switches the  
phone on or off.  
In menu mode, cancels your input and  
returns to idle mode.  
When pressed and held in idle mode,  
quickly accesses your voice mail server.  
Enter numbers, letters, and some  
special characters. If you want to make  
a international call, press and hold  
0
key  
or press twice key.  
0
Used for various purposes in different  
functions.  
When pressed and held while entering a  
phone number, the  
key enters a  
pause.  
When pressed and held in idle mode, the  
key enters or exits quiet mode.  
(on the left side of the phone)  
During a call, adjusts the earpiece  
volume.  
In idle mode with the phone open,  
adjusts the key tone volume.  
When pressed and held as a call is  
coming in, rejects the call or silences the  
ring tone. See page 108.  
12  
Your phone  
Displays  
Main display  
The main display has three areas:  
Icons  
Text and  
graphic area  
Soft key Indications  
Menu  
Phonebook  
Area  
Description  
First line  
Displays various icons. See  
page 14.  
Middle  
Displays messages, instructions,  
and any information that you  
enter, such as a number to be  
dialled.  
Last line  
Shows the functions currently  
assigned to the two soft keys.  
13  
 
Your phone  
Icons  
Icon Description  
Shows the received signal strength. The  
more bars, the stronger the signal.  
Appears when a call is in progress. When  
your SIM card supports ALS (Alternate  
Line Service), this icon may appear with  
the number 1, 2, or both.  
For example  
,
, or  
.
Appears when you are out of a service  
area. When it displays, you cannot make  
or receive calls.  
Appears when you have new or  
unchecked voice messages. When your  
SIM card supports ALS (Alternate Line  
Service), this icon may appear as  
, or  
,
.
(This icon may be shown only if your  
service provider supports this.)  
Appears when you have new or unread  
messages.  
Appears when you have new or  
unchecked multimedia messages.  
Appears when you are retrieving a  
multimedia message.  
Appears when you are sending a  
multimedia message.  
14  
 
Your phone  
Icon Description (continued)  
Appears when you set the alarm(s) to ring  
at a specified time.  
Appears when the call diverting feature is  
activated.When your SIM card supports  
ALS (Alternate Line Service), this icon  
may appear with the number 1, 2, or  
both. For example  
,
, or  
.
(This icon may be shown only if your  
service provider supports this.)  
Appears when you are connected to the  
GPRS network.  
Appears when you are in your home zone.  
(
This icon may be shown only if your service  
provider supports this.)  
Appears when your are in your office  
zone. (This icon may be shown only if your  
service provider supports this.)  
Appears when you set the alert type for  
incoming calls to Vibration or Vibration  
then melody. For further details, see  
page 98.  
Appears when quiet mode is active.  
Shows the level of your battery. The more  
bars you see, the more power you have  
left.  
15  
Your phone  
Backlight on mode  
The displays and the keypad are illuminated by a  
backlight. When you press any key or open the  
folder, the backlight illuminates. It turns off if no  
key is pressed within a given period of time,  
depending on the Backlight option settings. See  
page 103 for further details.  
Dim mode  
If no key is pressed for a given period of time which  
you can set in the Backlight menu option (Menu  
4.2.3), the backlight dims to save power. Press any  
key to awaken it from dim mode.  
Main display off mode  
If no key is pressed for one minute after the  
backlight dims, the main display shuts off. Press  
any key to reactivate the main display.  
External display  
Your phone has an external display on the folder.  
It indicates that you have an incoming call or  
message, and notifies you at the specified time if  
you have set an alarm.  
16  
 
Your phone  
When you press and hold either of the volume keys  
with the folder closed, the external display will  
illuminate.  
When the ear-microphone is connected, you can  
also use its button to turn on the external display.  
Built-in antenna  
Your phone has a built-in antenna. As with other  
mobile radio transmitting equipment, do not touch  
the antenna unnecessarily when the phone is  
switched on. Contact with the antenna affects call  
quality and may cause the phone to operate at a  
higher power level than needed.  
Built-in antenna  
17  
 
Getting started  
Inserting/Removing the SIM card  
When you subscribe to a cellular network, you are  
provided with a SIM card loaded with your  
subscription details, such as your PIN, any optional  
services available, and so on.  
• Keep all SIM cards out of the reach of small  
children.  
• The SIM card and its data can be easily damaged  
by scratches or bending, so be careful when you  
are handling, inserting, or removing the card.  
• When you are installing the SIM card, always  
make sure that the phone is switched off, as you  
will need to remove the battery.  
Inserting the SIM card  
1. If necessary, remove the battery by referring to  
page 20.  
2. Insert and slide the SIM card under the two  
tabs, ensuring that the notched corner goes to  
the top left and the gold contacts of the card  
face go into the phone.  
18  
   
Getting started  
Removing the SIM card  
To remove the SIM card, slide the card out of the  
holder, as shown.  
Installing/Removing/Charging the  
battery  
Your phone is powered by a rechargeable Li-ion  
battery. Use only approved batteries and chargers.  
Ask your local Samsung dealer for further details.  
Note: You must fully charge the battery before using  
your phone for the first time. A discharged  
standard battery is fully recharged in  
approximately 130 minutes.  
Installing the battery  
1. Insert the teeth on the bottom of the battery  
into the corresponding slots on the phone.  
19  
 
Getting started  
2. Press the battery against the back of the phone  
until it clicks into place.  
Removing the battery  
1. Switch off the phone by pressing and holding  
the  
key.  
2. To remove the battery, pull the battery catch  
toward the top of the phone and hold it in that  
position. Lift the battery away from the phone.  
20  
 
Getting started  
Charging the battery by using the travel  
adapter  
Note: The phone can be used while the battery is  
being charged, but this causes the battery to  
charge more slowly.  
1. Plug the travel adapter connecter into the jack  
at the bottom of the phone.  
Check that the arrow on the connector is facing  
up, as is the phone.  
2. Plug the adapter into a standard AC wall outlet.  
While charging, the battery icon at the top right  
corner of the display repeatedly fills to show that  
the battery is charging.  
21  
Getting started  
3. When charging is finished and the battery icon  
becomes solid and the ‘Fully charged’ message  
is displayed, disconnect the adapter from the  
power outlet and from the phone by pressing  
the grey tabs on both sides of the connector and  
pulling the connector out.  
Low battery indicator  
When the battery is weak and only a few minutes of  
talk time remain, the battery sensor informs you in  
the following ways: an empty battery icon flashes  
(
), you hear a warning tone, and a message  
repeats at regular intervals on the display.  
When the battery becomes too weak for the phone  
to operate, it switches off automatically.  
22  
Getting started  
Switching the phone on or off  
To switch the phone on:  
1. Open the folder.  
2. Hold down the  
switches on.  
key until the phone  
3. If the phone asks for a PIN, enter the PIN and  
press the OK soft key. For further details, see  
page 149.  
The phone searches your network and the  
current date and time appear on the display.  
After your phone find its network, you can make  
and receive a call.  
External display  
Service Provider  
Fri 17 Sep 04  
12:53  
12:53  
Fri 17 Sep  
Menu  
Phonebook  
Note: To change the language, use the  
Language menu option (Menu 4.3).  
For further details, see page 104.  
To switch the phone off:  
Hold down the  
key until the power-off  
animation displays.  
23  
 
Getting started  
Selecting functions and options  
Your phone offers a set of functions that allows you  
to customise your phone. These functions are  
arranged in menus and sub-menus, accessed via  
the two soft keys marked  
and  
. Each menu  
and sub-menu allows you to view and alter the  
settings of a particular function.  
The roles of the soft keys vary according to the  
current context; the labels or icons on the bottom  
line of the display, just above the soft keys, indicate  
their current roles.  
Example:  
Service Provider  
Fri 17 Sep 04  
12:53  
Menu Phonebook  
Press the right soft  
key to access the  
Phonebook feature.  
Press the left soft  
key to access menu  
functions.  
24  
 
Getting started  
To view various functions/options available or select  
the one you want:  
1. Press the appropriate soft key.  
2. To  
select the:  
Press the  
Select soft key.  
• function displayed  
• option highlighted  
view the next function or Down key.  
highlight the next option  
on a list  
move back to the  
previous function or  
option on a list  
Up key.  
move back up one level  
in the structure  
(or Back) soft  
key or key.  
C
return to the idle mode  
key.  
In some functions, you may be asked for a  
password or PIN. Enter the required code and press  
the OK soft key.  
25  
Call functions  
Making a call  
Using the number keypad  
When the idle screen is displayed, enter the area  
code and phone number, and press the  
key.  
Note: If you have set the Auto redial option (Menu  
4.5) to On, the number will be redialled  
automatically up to ten times if the person you  
called does not answer or the line is busy. See  
page 108 for further details.  
Correcting the number  
To clear  
Press the  
key.  
the last digit  
displayed  
C
any other digit  
Left or Right key until the  
cursor (|) is immediately to  
the right of the digit to be  
cleared and press the  
C
key.  
You can also insert a missing  
digit simply by pressing the  
appropriate key.  
all digits displayed  
C
key and hold it down for  
more than one second.  
26  
     
Call functions  
Making an international call  
1. Press and hold the key for the international  
0
prefix. The + character appears.  
2. Enter the country code, area code, and phone  
number and press the  
key.  
Making a call from Phonebook  
You can store the names and phone numbers you  
call regularly in the SIM card and the phone’s  
memory, which are jointly called Phonebook. You  
then do not need to remember all your numbers;  
simply select the required name to recall the  
associated number.  
For further details about the Phonebook feature,  
see page 58.  
Using the call logs  
The phone stores up to 20 calls dialled, received, or  
missed, chronologically. The last call is saved in the  
first position. If the same number occurs more than  
once, only the latest occurrence is saved.  
To recall any of these numbers:  
1. Press the  
log list.  
key in idle mode to access the Call  
2. Use the Up and Down keys to scroll through the  
list until the number you want highlights.  
The call logs are listed with the following icons:  
: Dialled calls  
: Received calls  
: Missed calls  
27  
Call functions  
3. To dial the number, press the  
key.  
To view each call record separately, see ‘Call  
Records’ on page 93.  
Viewing missed calls  
If you have a subscription that includes Caller Line  
Identification (CLI) and you are unable to answer a  
call, you can find out who was calling you so that  
you can call the person back.  
The number of missed calls displays on the idle  
screen immediately after a call has been missed.  
To view the missed calls immediately:  
1. If the folder is closed, open it up.  
2. Press the Missed soft key.  
The list of the missed calls displays.  
3. If necessary, scroll to the number you want by  
pressing the Up or Down key.  
4. To dial the number, press the  
key.  
To use the missed call options, see ‘Missed Calls’ on  
page 93.  
Note: To clear the new message notification on the  
display, press the  
key. When you also  
have missed calls, voice mails, short messages  
or multimedia messages, and multiple Cell  
Broadcasts (CBs), the right soft key indication  
changes in the following order: Missed  
Connect View CB, and Phonebook  
,
,
,
28  
Call functions  
Speed-dialling from Phonebook  
Once you have stored numbers in Phonebook, you  
can dial a number simply by pressing one or two  
keys. For further details, see page 62.  
Ending a call  
When you want to finish your call, briefly press the  
key or close the folder.  
Answering a call  
When somebody calls you, the phone rings and  
displays the incoming call animation.  
If the caller can be identified, the caller’s phone  
number, or name if stored in Phonebook, displays.  
To answer a call, open the folder. If it is already  
open, press the  
key or Accept soft key.  
Note: You can answer a call while using Phonebook or  
menu features. The current operation stops.  
Rejecting a call  
To reject an incoming call, press the  
key or  
the Reject soft key.  
If the Side key option is set to Reject, you can  
press and hold either of the volume keys on the left  
side of the phone to reject an incoming call; see  
page 108.  
29  
     
Call functions  
Adjusting the volume  
During a call, if you wish to adjust the earpiece  
volume, use the volume keys on the left side of the  
phone.  
Press the  
key to increase the volume level and  
the key to decrease it.  
In idle mode with the folder open, you can adjust  
the key tone volume using the and keys.  
Note: When a call comes in, you can reject the call or  
mute the call ringer by pressing and holding  
one of the volume keys, depending on the Side  
key option settings (Menu 4.7). For further  
details, see page 108.  
30  
 
Call functions  
Accessing options during a call  
Your phone provides a number of control functions  
that you can use during a call.  
Switching the microphone off (Mute)  
You can temporarily switch your phone’s  
microphone off so that the person with whom you  
are speaking cannot hear you.  
Example: You may wish to say something to  
another person in the room, but do not  
want the person on the phone to hear  
you.  
1. Press the Options soft key.  
2. When Mute highlights, press the Select soft  
key.  
The Mute icon (  
) appears on the bottom line  
of the display and your correspondent can no  
longer hear you.  
To switch the microphone back on:  
1. Press the Options soft key.  
2. When Unmute highlights, press the Select soft  
key.  
The Mute icon disappears and your  
correspondent can once again hear you.  
Searching for a number in Phonebook  
You can search for a number in Phonebook during a  
call.  
31  
 
Call functions  
1. Press the Options soft key.  
2. If necessary, press the Up or Down key to  
highlight the Phonebook option. Press the  
Select soft key.  
3. Select the Find name option and press the  
Select soft key.  
The Phonebook entries are listed.  
4. Enter the first few letters of the name that you  
want to find. The Phonebook entries will be  
listed, starting with the first entry matching your  
input.  
Note: You can also scroll through Phonebook from  
the beginning, by pressing the Up or Down  
key  
.
5. To view the highlighted entry, press the OK soft  
key.  
For further details about the Phonebook feature,  
see page 58.  
Muting/Sending key tones  
You can turn the key tones off or on during a call.  
When the Mute keys option is selected, your phone  
does not transmit key tones. This allows you to  
press keys without hearing annoying key tones  
during a call.  
To communicate with answering machines or  
computerised telephone systems, the Send keys  
option must be selected.  
32  
Call functions  
Sending DTMF tones  
You can send the DTMF(Dual Tone Multi-Frequency)  
tones of the number on the display during a call.  
This option is helpful for entering a password or  
account number when you call an automated  
system, like a banking service.  
To send the DTMF tones:  
1. When you are connected to the teleservice  
system, press the Options soft key.  
2. Press the Up or Down key to highlight the Send  
DTMF option. Press the Select soft key.  
3. Enter the number you want to send and press  
the OK soft key.  
The tones of the displayed number are sent.  
Using the message service  
You can read or write a new message during a call.  
1. Press the Options soft key.  
2. Press the Up or Down key to highlight the  
Message option. Press the Select soft key.  
3. To read a received message, select the Inbox  
option, and then scroll to the message that you  
want to read.  
To write a new message, select the New  
message option.  
4. Press the Select soft key.  
For further details about the SMS feature, see  
page 68.  
33  
Call functions  
Using the SIM-AT (SIM Application  
Toolkit)  
If you use a SAT card that provides additional  
services, the SAT menu displays. For further details,  
see your SIM card instructions.  
Putting a call on hold  
You can place a call on hold whenever you want.  
You can make another call while you have a call in  
progress if this service is supported by your  
network. Of these two calls, one is active and the  
other is on hold, and you can switch between the  
two.  
To place a call on hold, simply press the Hold soft  
key. You can reactivate the call whenever you want  
by pressing the Retrie. soft key.  
Making a second call  
You can make a call while you have a call in  
progress, if this service is supported by your  
network.  
To make a call while you have a call in progress:  
1. Enter the phone number that you want to dial or  
look it up in Phonebook.  
2. Press the  
key to dial the second call.  
The first call is automatically put on hold.  
Or alternatively:  
1. Put the current call on hold by pressing the Hold  
soft key.  
34  
 
Call functions  
2. Make the second call in the normal way.  
To switch between the two calls, simply press the  
Swap soft key.  
The current call is placed on hold and the call on  
hold is reactivated so that you can continue  
conversing with the other person.  
To end the call on hold, press the Options soft key  
and select the End held call option.  
When you want to finish, end each call normally by  
pressing the  
key.  
Answering a second call  
You can answer an incoming call while you have a  
call in progress, if this service is supported by your  
network and you have activated the Call waiting  
option (see page 128). You will be notified of an  
incoming call by a call waiting tone.  
To answer a call while you have another call in  
progress:  
1. Press the  
key to answer the incoming call.  
The first call is automatically put on hold.  
2. To switch between the two calls, press the Swap  
soft key.  
3. To end the call on hold, press the Options soft  
key and select the End held call option.  
To end the current call, press the  
key.  
The call on hold is automatically reconnected to  
you.  
35  
Call functions  
Transferring a call  
You can transfer the current call to the call on hold  
if this service is supported by the network, so that  
the callers can talk to each other. You are  
disconnected from both of them.  
1. During a call, answer or make a call in the  
normal way, and press the Options soft key.  
2. Press the Up or Down key to select the Transfer  
option and press the Select soft key.  
The two people are connected to each other.  
Making a multi-party call  
A multi-party calling is a feature of some networks  
service that allows up to six people to take part  
simultaneously in a multi-party or conference call.  
For more information, contact your service provider.  
Setting up a multi-party call  
1. Call the first participant in the normal way.  
2. Call the second participant in the normal way.  
The first call is automatically put on hold.  
3. To join the first participant to the multi-party  
call, press the Options soft key and select the  
Join option. Press the Select soft key.  
4. To add a new person to the multi-party call, call  
the person in the normal way. Then press the  
Options soft key and select the Join option.  
Press the Select soft key.  
You can add incoming callers by answering the call  
and selecting the Join option. Repeat as needed.  
36  
Call functions  
Geting a second call during a multi-party call  
To make a call when you are on a multi-party call:  
See ‘Making a second call’ on page 34.  
To answer a call when you have the multi-party call:  
1. Press the  
key to answer the incoming call.  
The multi-party call is automatically put on hold.  
The other call participants can continue talking.  
2. To switch between the two calls, press the Swap  
soft key.  
3. To end the call on hold, press the Options soft  
key and select the End held multiparty option  
or End held call option.  
To end the current call, press the  
key.  
The call on hold is recontinued to you.  
Having a private conversation with one  
participant  
1. Press the Options soft key and select the Split  
option. Press the Select soft key.  
2. Press the Up or Down key to highlight a  
participant and press the Select soft key.  
Now you can talk privately with that person. The  
other participants can continue to converse with  
each other.  
3. To return to the multi-party call, press the  
Options soft key and select the Join option.  
4. Press the Select soft key.  
37  
Call functions  
All of the multi-party call participants can now  
hear each other.  
Removing one participant  
1. Press the Options soft key and select the  
Remove option.  
2. Press the Up or Down key to highlight a  
participant and press the Select soft key.  
The call with that participant ends, but you can  
continue to talk with the other participants.  
3. End the multi-party call by closing the folder or  
pressing the  
key.  
Using the ear-microphone  
With the ear-microphone, you can make or answer  
a call without holding the phone.  
When you connect the ear-microphone to the jack  
at the top of the phone, the button on the  
ear-microphone works as listed below:  
To  
Press  
redial the last call the button twice in idle mode.  
answer a call  
end a call  
and hold the button.  
and hold the button.  
38  
 
Entering text  
The phone allows you to enter characters for  
messages and names in Chinese and English. To  
enter Chinese text, the phone provides several  
widely used pronunciation based (Pinyin) and  
character shape based (Stroke) input methods to  
meet the preferences of different users, allowing for  
greater convenience and ease of use.  
You can also enter any combination of Chinese  
characters, alphabets, numbers, and special  
symbols including punctuation marks.  
• Chinese Pinyin mode  
• Chinese simplified stroke mode  
• Quick English mode (T9 mode)*  
• English mode  
• Chinese traditional stroke mode  
• Number mode  
• Symbolic mode  
Directions for using each of the text input modes  
appear later in this section.  
*
is a registered Trademark of Tegic Communications,  
Inc. and is licensed under U.S. Patent 5,818,437/  
5,953,541/6,011,554.  
39  
   
Entering text  
Changing the text input mode  
When you are in a field that allows characters to be  
entered, you will see the text input mode indicator  
at the bottom of the display.  
Example: Entering a name in Phonebook  
Enter name  
Text input mode  
indicator: Chinese  
Pinyin mode  
6
OK  
PY  
You can change between Chinese and English input  
methods or to numbers and symbols input.  
To change to another text input mode:  
1. Press the right soft key indicating the current  
text input mode.  
2. Scroll to the mode you want to use by pressing  
the Up or Down key.  
You can use the Add word option to add new  
words into the T9 dictionary (Quick English  
mode). See page 46.  
3. Press the Select soft key to confirm the  
highlighted text input mode.  
Note: If you want to exit the menu without  
changing input modes, press the  
or key.  
soft key  
40  
 
Entering text  
4. The selected text input mode indicator appears  
at the bottom of the display.  
Using Chinese Pinyin mode  
Pinyin is a system writing Chinese words using the  
English alphabet. This system is based on the  
pronunciation of the Chinese word. With the Pinyin  
input method, you can enter Chinese characters by  
entering in the pinyin string from the phone’s  
keypad or touchpad, and the phone automatically  
presents the matching alternatives.  
This mode allows you to enter Pinyin characters  
with only one key press per letter.  
Entering characters in Pinyin mode  
1. Press the keys which correspond to the sound of  
the word, entering it phonetically by, referring to  
the English letters printed on the keys. Notice  
that the choices in the character selection field  
change.  
Example: Typing “ ” in Pinyin mode  
Enter name  
Text area  
Key stroke area: press  
the  
5
and  
4
keys to  
enter “li.”  
Character selection field  
6
OK  
PY  
41  
 
Entering text  
2. If there are more than one Pinyin spelling  
corresponding to your key strokes, press the  
Left or Right key to select the spelling you want.  
3. If you cannot find the character you want from  
those displayed, press the Up or Down key to  
scroll through choices in the character selection  
map.  
When the character you are typing appears in  
the character selection field, you may select it,  
without completing the Pinyin spelling or  
entering the tone for the character.  
4. To select a character, press the  
the character selection field. Each displayed  
character is numbered, to . With the  
1
key to activate  
1
5
character selection field active, pressing the  
appropriate number key selects the  
corresponding character.  
Enter name  
Press the  
to enter “  
3
key  
.”  
6
OK  
PY  
Notes  
:
To remove the activate character from the character  
selection field, press the key.  
C
42  
Entering text  
Scrolling  
To move the cursor left or right through your text  
message, press the Left or Right key.  
Inserting a space  
To insert a space between characters, press the  
key in the Text Area.  
Clearing strokes and characters  
Press the  
C
key one or more times to remove the  
character(s) to the left of the cursor. Once the  
Pinyin Area is empty, pressing the  
characters from the Text Area.  
C
key removes  
Using Chinese stroke modes  
These modes allow you to enter individual Chinese  
strokes, in written order; from top to bottom, and  
from left to right. Your phone provides Chinese  
simplified stroke mode and Chinese traditional  
stroke mode.  
The two modes work similarly, but the characters  
that appear on the display may differ.  
Even though there are many different strokes used  
to create Chinese characters, the strokes are  
classified into 5 basic categories; heng, shu, pie,  
dian, and zhe. The basic strokes are printed on the  
1
to  
5
keys on the keypad.  
To enter a stroke, press the key printed with the  
stroke that most closely represents the stroke you  
want.  
The table shows the stroke/key relationship:  
43  
 
Entering text  
Typing strokes and characters in stroke  
mode  
1. To type a character, press the keys that  
correspond to its component strokes. Press the  
keys in the order that you would write the  
strokes, using one press per stroke.  
Example: Typing “  
” in Chinese traditional  
stroke mode  
Enter name  
Key stroke field:  
Press the  
and then the  
to enter  
5
key to enter  
,”  
3
key  
.”  
Character selection field:  
Press the 7 key to select  
6
.”  
44  
Entering text  
2. The phone displays your strokes in the key  
stroke area and offers character choices in the  
character selection field. As you enter strokes,  
notice that the choices in the character selection  
field change.  
To scroll through the choices in the character  
selection field, press the Up or Down key.  
Note: If you are uncertain of the order of one or  
more strokes, press the  
6
key in place of  
each questionable stroke. Continue entering  
strokes until the character is displayed in  
the character selection field or until you  
have finished the character.  
3. When the character you are typing appears in  
the character selection field, you may select it  
without finishing the stroke sequence for the  
character. Each character displayed in the  
character selection field is numbered,  
7
to  
0
and  
. To select a character from the character  
selection field and add it to your message,  
simply press the appropriate key.  
Scrolling  
To move the cursor left or right through your text,  
press the Left or Right key.  
Inserting a space  
To insert a space between characters, press the  
key in the Text Area.  
Clearing strokes and characters  
Press the  
C
key one or more times to remove  
strokes to the left on the cursor. Once the Stroke  
45  
Entering text  
Area is empty, pressing the  
C
key removes  
characters from the Text Area.  
Using Quick English mode  
This mode allows you to enter English words with  
only one key press per letter. Each key on a keypad  
has more than one letter; for example, when you  
press the 5 key once, J, K, or L displays. Quick  
English mode automatically compares your key  
presses to an internal linguistic database to  
determine the correct word.  
The mode requires far fewer keystrokes than the  
traditional multi-tap method, English mode.  
To input a word, press the keys that correspond to  
the letters you need. Remember the following as  
you are inputting:  
1. Start entering the word by pressing keys  
Press each key only once for each letter.  
2
to  
9.  
Example: To enter “hello” in Quick English  
mode, press the , and keys.  
4,  
3,  
5,  
5
6
The word you are typing appears on the display.  
It may change with each key that you press.  
2. Enter the whole word before editing or deleting  
any keystrokes.  
3. If the word is correct, start entering the next  
word. Otherwise, while the word is highlighted,  
press the  
0
key repeatedly to display alternative  
4. word choices for the keys that you have  
pressed.  
46  
 
Entering text  
Example: Both “of” and “me” have the sequence  
of  
6
and  
3. The phone displays the  
most commonly used choice first.  
5. Insert a space between words by pressing the  
key.  
6. Enter the next word.  
If Spell appears above the left soft key while you  
are entering text, the word does not exist in the T9  
dictionary. To type words not found in the T9  
dictionary, change the text input mode to English  
mode, or proceed as follows:  
1. Press the Spell soft key, or press the right soft  
key and select the Add word option.  
2. Enter the word you want to add using English  
mode (see page 48) and press the OK soft key.  
The word is saved in the T9 dictionary and  
inserted in the input field.  
3. Continue entering other words in Quick English  
mode.  
Smart punctuation  
To enter periods, hyphens, or apostrophes, press  
the  
1
key. T9 mode applies rules of grammar to  
insert the correct punctuation.  
Example: The key is used twice to display two  
1
punctuation marks.  
l
e
t
s
e
a
t
.
47  
Entering text  
Changing the case  
To change the case of the next letter(s) that you  
enter, press the  
key. There are three cases:  
• Lower Case (no indicator)  
• Initial Capital (  
• Capital Lock (  
)
)
Scrolling  
To move the cursor to the left or right within the  
text, press the Left or Right key.  
Clearing letters and words  
Press the  
C
key one or more times to clear letters to  
the left of the cursor. Press and hold the  
clear the display.  
C
key to  
Using English mode  
When inputting words in English mode, press the  
key labelled with the required letter:  
- Once for the first letter  
- Twice for the second letter  
- And so on  
Example: To display the letter “C”, quickly press the  
2
key three times. To display the letter  
“K, press the key twice. This method is  
5
called Multi-tap typing.  
Note: The cursor moves to the right when you press a  
key. When entering the same letter twice or a  
different letter on the same key, just press the  
48  
 
Entering text  
Right key, or simply wait a few seconds for the  
cursor to move to the right automatically, and  
then enter the next letter.  
Refer to the table below for more information about  
the characters available:  
Characters in the Order Displayed  
Key  
Upper case  
Lower case  
Changing the case  
To change the case of the next letter(s) that you  
enter, press the key. There are three cases:  
• Lower Case (no indicator)  
• Initial Capital (  
• Capital Lock (  
)
)
Inserting a space  
To insert a space between characters, press the  
key.  
49  
Entering text  
Scrolling  
To move the cursor to the left or right within the  
text, press the Left or Right key.  
Clearing letters and words  
Press the  
C
key one or more times to clear letters to  
the left of the cursor. Press and hold the  
clear the display.  
C
key to  
Using number mode  
Number mode enables you to enter numbers in  
your text. Press the keys corresponding to the digits  
you want to enter.  
Using symbolic mode  
Symbolic mode enables you to enter symbols in  
your text.  
To  
Press the  
display more  
symbols  
Up or Down key.  
enter a symbol  
corresponding number key.  
return to the  
previous text input  
mode  
OK or  
soft key.  
50  
     
Using the menus  
The phone offers a range of functions that allows  
you to tailor the phone to your needs. These  
functions are arranged in menus and sub-menus.  
Accessing a menu function  
The menus and sub-menus can be accessed by  
pressing the Menu or Phonebook soft key in idle  
mode, then scrolling with the navigation keys.  
1. In idle mode, press the Menu soft key to access  
the main menu or press the Phonebook soft  
key to access Phonebook menu.  
2. Scroll through the menus using the Left or Right  
key.  
3. Find the sub-menu that you wish to use by  
scrolling with the Up or Down key.  
4. Press the Select soft key to access the sub-  
menu.  
If the menu that you have selected contains  
further sub-menus, repeat steps 3 and 4.  
5. Scroll to the option you want to choose with the  
Up or Down key.  
6. Press the Select soft key to choose the setting.  
Note: You can return to the previous menu level by  
pressing the  
soft key.  
51  
   
Using the menus  
You can also access the menus and sub-menus by  
quickly entering the corresponding menu number.  
Example: To access the Voice mail menu option,  
press the Menu soft key,  
1,  
3
in idle  
mode.  
List of menu functions  
Various menus let you check or change your phone  
settings. The following list shows the menu  
structure.  
The numbers assigned to each menu option may  
not match the menu number on the phone. It  
depends on the services supported by your SIM  
card.  
Phonebook menu  
1. Phonebook (see page 58)  
1.1 Find name  
1.2 Add entry  
1.3 Speed-dial list  
1.4 Copy all to phone  
1.5 Delete all  
2. Management (see page 65)  
2.1 Own number  
2.2 Group setting  
2.3 Memory status  
3. Services (see page 67)  
3.1 Service directory  
52  
 
Using the menus  
Main menu  
1. Messages (see page 68)  
1.1 Short message  
1.1.1 Inbox  
1.1.2 New message  
1.1.3 Outbox  
1.1.4 Delete all  
1.2 Multimedia message  
1.2.1 Inbox  
1.2.2 New message  
1.2.3 Outbox  
1.2.4 Draft  
1.2.5 My folder  
1.2.6 Delete all  
1.3 Voice mail  
1.3.1 Connect to voice mail  
1.3.2 Voice server number  
1.4 Preset messages  
1.5 Broadcast  
1.5.1 Read  
1.5.2 Receive  
1.5.3 Channel  
1.5.4 Language  
1.6 Settings  
1.6.1 Short message  
1.6.2 Multimedia message  
1.7 Memory status  
1.7.1 Short message  
1.7.2 Multimedia message  
53  
Using the menus  
2. Call records (see page 93)  
2.1 Missed calls  
2.2 Received calls  
2.3 Dialled calls  
2.4 Delete all  
2.5 Call time  
2.5.1 Last call time  
2.5.2 Total sent  
2.5.3 Total received  
2.5.4 Reset timers  
2.6 Call costs*  
2.6.1 Last call cost  
2.6.2 Total cost  
2.6.3 Max cost  
2.6.4 Reset counters  
2.6.5 Set max cost  
2.6.6 Price/Unit  
3. Sound settings (see page 97)  
3.1 Incoming calls  
3.1.1 Default melodies  
3.1.2 My sounds  
3.1.3 Ring volume  
3.1.4 Alert type  
3.2 Messages  
3.2.1 Short message  
3.2.2 Multimedia message  
3.3 Power on/off  
3.4 Connection tone  
3.5 Key tone  
3.6 Minute minder  
3.7 Quiet mode  
3.8 Alerts on call  
* Shown only if supported by your SIM card.  
54  
Using the menus  
4. Phone settings (see page 102)  
4.1 Greeting message  
4.2 Display  
4.2.1 Wallpaper  
4.2.2 Skin  
4.2.3 Backlight  
4.2.4 LCD brightness  
4.3 Language  
4.4 Security  
4.4.1 PIN check  
4.4.2 Change PIN  
4.4.3 Phone lock  
4.4.4 Change password  
4.4.5 Privacy  
4.4.6 SIM lock  
4.4.7 FDN mode*  
4.4.8 Change PIN2*  
4.5 Auto redial  
4.6 Active folder  
4.7 Side key  
4.8 Anykey answer  
4.9 Reset settings  
4.9.1 Sound settings  
4.9.2 Phone settings  
4.9.3 All settings  
5. Organiser (see page 110)  
5.1 New memo  
5.2 Calendar  
5.3 To do list  
* Shown only if it is supported by your SIM card.  
55  
Using the menus  
5.4 Clock  
5.4.1 Set time  
5.4.2 Set date  
5.4.3 Set world time  
5.4.4 Set format  
5.5 Alarm  
5.6 Calculator  
5.7 Conversion  
5.7.1 Length  
5.7.2 Weight  
5.7.3 Volume  
5.7.4 Area  
5.7.5 Temperature  
5.8 Timer  
5.9 Stopwatch  
6. Network services (see page 124)  
6.1 Call diverting  
6.1.1 Divert always  
6.1.2 Busy  
6.1.3 No reply  
6.1.4 Unreachable  
6.1.5 Cancel all  
6.2 Call barring  
6.2.1 All outgoing  
6.2.2 International  
6.2.3 International except to home  
6.2.4 All incoming  
6.2.5 Incoming while abroad  
6.2.6 Cancel all  
6.2.7 Change barring password  
6.3 Call waiting  
6.4 Network selection  
6.5 Caller ID  
6.6 Active line*  
* Shown only if it is supported by your SIM card.  
56  
Using the menus  
7. Fun box (see page 131)  
7.1 WWW Services*  
7.1.1 Home  
7.1.2 Bookmark  
7.1.3 Go to URL  
7.1.4 Clear cache  
7.1.5 Proxy settings  
7.1.6 Current proxy  
7.1.7 Push messages  
7.2 Media box  
7.2.1 Images  
7.2.2 Sounds  
7.2.3 Delete all  
7.2.4 Memory status  
7.3 JAVA world  
7.3.1 Downloads  
7.3.2 Internet settings  
7.3.3 Memory status  
**  
8. SIM AT (Application Toolkit)  
* May not be shown or supported by your network service provider.  
** Shown only if it is supported by your SIM card.  
57  
Phonebook menu  
Phonebook offers the following features:  
Phonebook: allows you to find, create, and set  
up the speed-dialling feature, and manage  
Phonebook.  
Management: allows you to create, or remove  
your own number, set up caller groups and check  
memory status.  
Services: allows you to use the service directory  
depending on your SIM card.  
Find name (Phonebook 1.1)  
To search for a number in Phonebook, proceed as  
follows.  
1. Enter the initial letter(s) of the name that you  
want to find.  
Phonebook entries are listed, highlighting the  
entry matching your input.  
2. If necessary, press the Up or Down key to scroll  
to the entry you want.  
3. Once you have found the entry, press the OK  
soft key.  
4.  
To  
Press the  
dial the displayed  
number  
key.  
change Phonebook  
entries  
Options soft key. For  
further details, see  
page 59  
58  
   
Phonebook menu  
Editing phone memory entries  
While looking at a Phonebook entry, scroll to the  
category that you want to edit by pressing the Left  
or Right key. The following categories are available  
and you can edit the information of each category  
by pressing the Options soft key.  
Category Options  
Mobile  
Home  
Office  
Fax  
Select one of the following options. For  
details about these options, refer to  
the page 60.  
Edit number  
Change name  
Other  
Send message (shown if the category  
contains a number)  
Copy (shown if the category contains a  
number)  
Delete entry  
E-Mail  
Group  
Graphic  
Alert  
Enter or edit e-mail address  
Set one of the groups or no group  
Set one of the images or no image  
Set one of the melodies or do not  
assign a melody  
59  
 
Phonebook menu  
Editing SIM memory entries  
To change SIM memory entry information, press the  
Options soft key.  
The following options are available:  
Edit number  
This option allows you to change the number. You  
can also add a new number if none has been stored  
for the selected entry.  
Change name  
This option allows you to change the name of the  
entry.  
To clear the old name, press the  
C
key. For more  
information about how to enter characters, see  
page 39.  
Send message  
This option allows you to send a message to the  
number. For more information about how to send a  
message, see page 71.  
Copy  
This option allows you to copy the entry from the  
SIM card to the phone’s memory.  
Delete entry  
This option allows you to delete the entry from  
Phonebook. To confirm the deletion, press the Yes  
soft key. Otherwise, press the No soft key.  
60  
 
Phonebook menu  
Add entry (Phonebook 1.2)  
You can store phone numbers and the  
corresponding names in the memory of your SIM  
card. In addition, you can store up to 1000 names  
in the phone’s memory, and each name can be  
associated with up to five numbers.  
1. Enter the number you want to save.  
Notes  
:
• If you make a mistake while entering a number,  
correct it using the  
page 26.  
C
key. For further details, see  
To insert a dialling pause for special phone  
services, such as banking by phone, hold down  
the  
key. “P” is displayed to indicate that a  
pause will be inserted at that point in the dialling.  
2. When you are sure that the number is correct,  
press the Save soft key.  
3. Select the memory where the number is to be  
stored, either Phone or SIM, and press the  
Select soft key.  
Note: If you change phones, any numbers stored  
in your SIM card will automatically be  
available with the new phone, whereas any  
numbers stored in the phone’s memory  
must be entered again.  
4. If you select SIM in step 3, go to step 5.  
If you select Phone in step 3, choose a number  
type using the Up or Down key and press the  
Select soft key.  
5. Enter the associated name.  
For information about how to enter characters,  
see page 39.  
61  
   
Phonebook menu  
6. When you are satisfied, press the OK soft key.  
7. If you select Phone in step 3, go to step 8.  
If you select SIM in step 3, enter the location  
number and press the OK soft key.  
8. If you want to change the entry, use the options.  
for information about how to do it, see page 59.  
If you want to return to the idle mode, press the  
soft key or the  
key.  
Storing a Number in idle mode  
As soon as you start to enter a number in idle  
mode, Save appears above the left soft key to allow  
you to store the number in Phonebook.  
Continue the procedure from step 1 on page 61 to  
store the number.  
Speed-dial list (Phonebook 1.3)  
You can set up to eight speed-dial entries and then  
dial them easily whenever you want, simply by  
pressing the associated number key.  
Setting up speed-dial entries  
1. Press the Up or Down key to scroll to an empty  
location and press the Select soft key.  
2. When the Edit number option highlights, press  
the Select soft key.  
62  
 
Phonebook menu  
3. Enter a phone number and press the OK soft  
key. Or,  
To retrieve a number from your Phonebook,  
press the Phonebook soft key. Select an entry  
from the list and press the OK soft key. Press  
the OK soft key to save it.  
4. When you have finished, press the  
the key to exit.  
soft key or  
Editing speed-dial entries  
1. Select the speed-dial entry you want to edit  
from the list and press the Select soft key.  
2. Select one of the following menu options by  
pressing the Up or Down key and press the  
Select soft key:  
Edit number: allows you to change the  
number.  
Change name: allows you to change the  
name of the entry.  
Delete: allows you to clear the setting so that  
no number is assigned to the key.  
3. When you have finished, press the  
the key to exit.  
soft key or  
Using the speed-dial feature  
When the idle screen is displayed, press the number  
key,  
press the  
number key.  
2
to  
9
, assigned to the speed-dial entry and  
key. You can also press and hold the  
Note: The  
1
key is reserved for your voice mail server  
number.  
63  
Phonebook menu  
Dialling a number stored in the SIM card  
Once you have stored phone numbers in your SIM  
card, you can dial them easily whenever required.  
To dial a number stored in the SIM card:  
1. Enter the number of the SIM card location where  
the number you want to dial is stored.  
2. Press the  
key.  
The display shows the name and number stored  
in that location.  
3. Press the Dial soft key or the  
key.  
Copy all to phone (Phonebook 1.4)  
You can copy all of the numbers stored in the SIM  
card to the phone’s memory.  
1. When a confirming message appears, press the  
Yes soft key to copy.  
The number are copied to the phone’s memory,  
labelled with Mobile by default.  
Otherwise, press the No soft key.  
2. When you have finished, press the  
the key to exit.  
soft key or  
64  
 
Phonebook menu  
Delete all (Phonebook 1.5)  
You can delete Phonebook entries selectively  
depending on their memory location, or all entries  
at once.  
1. Scroll to the desired memory selection and place  
a check mark ahead of it by pressing Select soft  
key.  
Selecting All places check marks on both of the  
memory sites.  
2. If necessary, repeat step 1 to check another  
option.  
3. When you have finished checking, press the OK  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the entries in the  
memory or memories. Then enter the phone  
password and press the OK soft key. The  
password is preset to “00000000” by default. To  
change it, see page 106.  
Otherwise, press the No soft key.  
Own number (Phonebook 2.1)  
To store your own phone number(s) with a name:  
1. Scroll to an empty location by pressing the Up or  
Down key and press the Select soft key.  
2. When Edit number highlights, press the Select  
soft key.  
3. Enter your number and press the OK key.  
65  
     
Phonebook menu  
4. To assign a name, press the Down key to move  
to Change name and press the Select soft key.  
5. Enter a name and press the OK soft key.  
6. When you have finished, press the  
the key to exit.  
soft key or  
To remove one of your numbers:  
1. Select the entry you want to delete from the  
Own number list and press the Select soft key.  
2. Scroll to Delete by pressing the Up or Down key  
and press the Select soft key.  
3. When a confirming message appears, press the  
Yes soft key to delete the number.  
Otherwise, press the No soft key.  
4. When you have finished, press the  
the key to exit.  
soft key or  
Group setting (Phonebook 2.2)  
You can change the settings of the five predefined  
caller groups.  
1. Select a caller group by pressing the Up or Down  
key and press the Select soft key.  
2. Scroll to a setting option by pressing the Up or  
Down key and press the Select soft key.  
The following options are available:  
Melody: allows you to select a melody to  
sound when a call comes in from a member of  
the group.  
66  
 
Phonebook menu  
Change name: allows you to change the  
name of the group; for further details about  
how to enter characters, see page 39.  
View image: shows the image to display  
when a call comes in from a member of the  
group.  
3. Change the setting as required and press the  
Select soft key.  
4. Repeat steps 2 and 3 to change other options.  
When you have finished, press the  
the key to exit.  
soft key or  
Memory status (Phonebook 2.3)  
You can check how many names and numbers are  
stored in Phonebook, phone’s memory, SIM card,  
and how many free locations remain.  
When you have finished, press the  
the key to exit.  
soft key or  
Service directory (Phonebook 3.1)  
Note: This feature may not be available depending on  
your SIM card.  
The display shows the list of the numbers in the  
Service Directory.  
If necessary, scroll to a number by pressing the Up  
or Down key and press the  
number.  
key to dial the  
67  
   
Messages  
This menu allows you to create, send, read, and  
save messages with the Short Message Service  
(SMS: text messages), Enhanced Message Service  
(EMS: messages including simple images,  
animations, or melodies) and Multimedia Message  
Service (MMS: messages supporting the  
presentation of various media types, such as full  
colour images, polyphonic ring tones). Voice mails  
are also available.  
Note: This feature is only available if your service  
provider’s network supports it. Contact your  
service provider for more information.  
Short message (Menu 1.1)  
Short message service (SMS) allows you to send  
and receive short text messages to and from other  
GSM mobile phones. In addition, your phone  
supports the Enhanced Messaging Service (EMS),  
which enables you to create short messages  
consisting of simple pictures, melodies, animations,  
and stylized text, all of which adds a new dimension  
to simple text messages.  
To send text messages by phone, you must obtain  
the number of the SMS centre from your service  
provider.  
Receiving a new message  
When you receive a new message, the New  
message icon (  
) and a text notification showing  
the number of the message appear on the display.  
You also hear an alert, depending on the message  
sound setting; for further details, see page 98.  
68  
     
Messages  
To read the new message(s) immediately, press the  
View soft key. The list of messages appears.  
Note: To clear the new message notification on the  
display, press the  
key. When you also  
have missed calls, voice mails, short messages  
or multimedia messages, and multiple Cell  
Broadcasts (CBs), the right soft key indication  
changes in the following order: Missed  
Connect View CB, and Phonebook  
,
,
,
Managing memory  
Inbox and Outbox share a given amount of memory  
on your phone or SIM card. When the message  
memory is full, the New message icon (  
and an error message displays. (It disappears when  
you press the key, but it reappears if you  
) blinks  
don’t delete any messages to free up some  
memory.) In this situation, you cannot receive any  
new messages. You must delete one or more  
messages to create space for incoming messages.  
You can do this by using the Delete option in Inbox  
or Outbox, or by using the Delete all option; for  
further details, see page 74.  
Inbox (Menu 1.1.1)  
Your phone receives incoming messages and saves  
them in Inbox. SMS messages are usually saved on  
the SIM card, but if the SIM memory is full, the  
incoming messages will be saved in the phone’s  
memory.  
When the Inbox menu is selected, the list of  
messages received displays with the:  
• sender’s phone number, or name if stored in  
Phonebook.  
69  
Messages  
• message status;  
message to read or  
message.  
for a read message,  
for an incomplete  
for a  
To view a message, scroll to it and press the Select  
soft key. The screen shows the:  
• date and time when the message was received.  
• memory site where the message is stored:  
for the SIM card or  
for the phone’s memory.  
• message contents.  
You can scroll to the next or previous message by  
pressing the Left or Right key.  
To scroll through the message contents, press the  
Up or Down key. When you select on an object that  
includes a melody, the melody is played.  
You can choose the following options by pressing  
the Options soft key:  
Delete: allows you to delete the message.  
Message reply: allows you to reply to a message.  
Call back: allows you to call the sender back.  
Cut address: allows you to send a message to the  
number or paste the number into Phonebook.  
Send: allows you to send the message to another  
person.  
Edit: allows you to edit the message.  
Extract media: you can save media (except  
predefined EMS animations and sounds) from the  
message into the Media box. You can then use  
these items when writing future messages.  
Transfer: allows you to transfer the message from  
the SIM card to the phone’s memory.  
70  
Messages  
New message (Menu 1.1.2)  
Using this menu, you can write messages  
containing text, images, and melodies.  
1. Create a message.  
On the first line of the display, you see the  
remaining number of characters you are able to  
enter, the designated number of the current  
message with the maximum number of  
messages you can create, and the font style you  
set in the Text option.  
Note: For further information about how to enter  
characters, see page 39.  
2. While entering your message, press the  
Options soft key to use the following options.  
Send: allows you to send the message. Refer  
to the next step.  
Text: allows you to format the text. The  
following text attributes can all be combined  
as required.  
Text size: Small/Medium/Large  
Text mode: Normal/Underscore/Strikethrough  
Bold: Off/On  
Italic: Off/On  
Alignment: Left/Center/Right  
Note: The text attributes you can use are  
different depending on whether you are  
entering English or Chinese.  
Add media: allows you to add pictures,  
animations, and/or melodies to the message.  
Select a category: Add picture Add  
,
animation or Add melody. You can then  
choose a factory-set object or an object that  
you have received from another source and  
stored in the Media box. See page 138.  
71  
 
Messages  
Preset messages: allows you to add a preset  
message to your text. Select one of nine  
messages stored in the Preset messages  
menu option (Menu 1.4). See page 86.  
Save message: allows you to save the  
message so that it can be sent later. You can  
read the message in Outbox.  
3. When you have finished entering your message,  
choose Send from the options.  
4. Enter a destination number on the Address  
screen.  
You can search for a number in Phonebook by  
pressing the Phonebook soft key.  
Note: To clear part or all of your input, press or press  
and hold the  
C
key. If or when there is no input,  
you can press and hold the  
the previous screen.  
C
key to move to  
To send the message up to 5 different  
destinations, press the Add soft key and repeat  
step 4.  
5. When you have finished entering the numbers,  
press the OK soft key.  
6. If the Enter centre screen displays, enter the  
SMS service centre number and press the OK  
soft key.  
You can store the SMS service centre number on  
your phone. For details, see page 88.  
Note: If the message is not sent successfully, press  
the Retry soft key to try to send the message  
again. Or, press the No soft key and the Save  
soft key to save the message, or exit the menu  
by pressing the No soft key.  
72  
Messages  
Outbox (Menu 1.1.3)  
Outbox stores any messages that you have already  
sent, or saved without sending.  
When the Outbox menu option is selected, the list  
of messages you have sent or saved displays with  
the:  
• recipient’s phone number, or name if stored in  
Phonebook.  
• message status;  
a message to send.  
for a sent message or  
for  
To view a message, scroll to it and press the Select  
soft key. The screen shows the:  
• message status;  
a message to send.  
for a sent message or  
for  
• memory site where the message is stored:  
for the SIM card or  
for the phone’s memory.  
• message contents.  
You can scroll to the next or previous message by  
pressing the Left or Right key.  
To scroll through the message, press the Up or  
Down key.  
You can choose the following options by pressing  
the Options soft key:  
Delete: allows you to delete the message.  
Cut address: allows you to send a message to the  
number or paste the number into Phonebook.  
Send: allows you to send the message to another  
person.  
Edit: allows you to edit the message.  
73  
Messages  
Transfer: allows you to transfer the message from  
the SIM card to the phone’s memory.  
Delete all (Menu 1.1.4)  
You can delete all messages stored in the SIM card  
and phone’s memory.  
1. Scroll to a message box and place a check mark  
next to it by pressing the Select soft key.  
Selecting All places check marks on all of the  
message boxes.  
2. If necessary, repeat step 1 to check other box.  
3. When you have finished making your selections,  
press the OK soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the messages in the  
selected box(es).  
Otherwise, press the No soft key.  
Multimedia message (Menu 1.2)  
Multimedia Message Service (MMS) is a messaging  
service very similar to Short Message Service  
(SMS). It provides automatic and immediate  
delivery of personal multimedia messages from  
phone to phone or from phone to e-mail.  
In addition to the familiar text content of text  
messages, multimedia messages can contain  
images, graphics, voice, and sounds. An MMS  
message is a multimedia presentation in a single  
entry. It is not a text file with attachments.  
74  
   
Messages  
Using the MMS feature, your phone can receive  
multimedia messages. You can also send  
multimedia messages. This function is available  
only if it is supported by your service provider. Only  
phones that offer multimedia message features can  
receive and display multimedia messages.  
Note: When you buy media content from the Internet,  
this content is delivered to you in MMS  
messages. You can retrieve the messages from  
the server and then save the items in your  
phone’s memory. You can’t forward these  
messages to other people or add the saved  
items to a MMS message.  
Retrieving a new message  
When you are retrieving a message, the Retrieving  
icon(  
retrieving a new message, the New message icon  
) and a text notification showing the number of  
) appears on the display. When you finish  
(
the message appear on the display. You also hear  
an alert, depending on the message sound setting;  
for further details, see page 98.  
To read the new message in idle mode, press the  
View soft key. You will see the Inbox contents.  
Select a message to view it.  
Note:  
• When you set Message reception(see page 90) to  
Automatic, you cannot enter the Downloads  
menu(Menu 7.3.1) and also cannot access WAP  
sites while retrieving a new message. If a message  
comes in while you are playing a Java game, a  
notification message only will be delivered to your  
phone. After you have finished your game, you can  
retrieve the message by accessing the notification  
message.  
75  
Messages  
To clear the new message notification on the display,  
press the  
key. When you also have missed  
calls, voice mails, short messages or multimedia  
messages, and multiple Cell Broadcasts (CBs), the  
right soft key indication changes in the following  
order: Missed  
Phonebook  
,
Connect, View, CB, and  
.
If Message reception has been set to Manual (for  
details, see page 90), when the new message icon  
(
) appears on the display, you must go to the  
Inbox to retrieve the message. You can select  
messages with the following icons: , or  
,
. You can retrieve or delete the message using  
the Opt. soft key.  
Managing memory  
When the memory is full, the New message icon  
(
) blinks and an error message displays. (It  
disappears when you press the key, but it  
reappears if you don’t delete any messages to free  
up some memory.) In this situation, you cannot  
receive any new messages, You must delete one or  
more messages to create space for incoming  
messages. You can do this by using the Delete  
option in Inbox, Outbox, Draft, or My folder, or by  
using the Delete all option; for further details, see  
page 84.  
Notes:  
• You can receive up to 150 messages.  
• Multimedia message boxes and Media box share a  
given amount of memory in your phone. You can use  
the Delete or Delete all option to delete some  
sounds or images in Media box.  
76  
Messages  
Inbox (Menu 1.2.1)  
Your phone receives incoming messages and saves  
them in Inbox.  
When the Inbox menu is selected, the list of  
messages received displays with the:  
• message’s subject, or no subject if the message  
has no subject.  
• sender’s phone number.  
• message status:  
for a read message,  
message, for a read notification message,  
and for an unread notification message.  
for a retrieving message,  
for an unread  
Note: There are several different message status  
icons ( ) corresponding to the  
,
,
priority assigned to the message by the sender.  
(see page 89).  
To view a message, scroll to it and press the Select  
soft key.  
To scroll through the message contents, press the  
Up or Down key. When the message has more than  
one page, you can press the Left or Right key to  
move through the pages, or the pages will cycle  
automatically according to time settings determined  
by the sender.  
Notes:  
• Your phone may not be able to play or display  
some types of sound or picture files.  
• If an incoming message has a video clip attached,  
the attachment icon (  
) appears on the title  
line. You will not be able to view the attachment,  
nor extract it form messages.  
77  
Messages  
While viewing a message, you can choose the  
following options by pressing the Opt. soft key:  
Delete: deletes the message.  
Replay: replays the message.  
Reply: allows you to send a reply to the sender.  
Forward: forwards the message to another person.  
When the message contains media contents you  
has bought on the Internet, forwarding is not  
available.  
Call back: allows you to call the sender.  
Cut media: extracts a picture or sound, so that you  
can set them as wallpaper or a ringtone, or you can  
include them as part of a multimedia message.  
Cut address: extracts phone numbers, email  
addresses, or URL addresses in the text, so that you  
can call the number, or send a message to the  
address, or save it in your Phonebook.  
Properties: shows detailed information about the  
message.  
Move to My folder: moves the message to My  
folder for later use.  
New message (Menu 1.2.2)  
This menu option allows you to create a new  
multimedia message and then send it to one or  
multiple destinations.  
1. There are four categories of items that can be  
added to multimedia messages: scroll to select  
the one that you want, and press the Add soft  
key. Then proceed according to the instructions  
below.  
78  
Messages  
Item  
How to add  
Subject 1. Enter a subject for your message. For  
details about entering characters, see  
page 39.  
2. Press the OK soft key.  
Note: To move to a previous screen while  
entering a subject, delete all of the  
entered characters and hold down  
the  
C
key.  
Picture  
1. From the MMS images file, select the  
picture you want to add to the  
message. The picture will be  
displayed.  
2. Press the Add soft key.  
You may not be able to add some  
downloaded images if they are not in  
the correct format.  
Sound  
To add a new sound;  
1. Select the Record new option.  
2. Press the Record soft key to start  
recording.  
3. Press the Stop soft key to stop  
recording.  
4. Press the Play soft key to replay the  
sound. Or, press the Add soft key to  
add the sound. Enter a name for the  
sound and press the OK soft key. The  
sound will be both added to the  
message and saved in the Media box.  
79  
Messages  
Item  
How to add  
Sound  
To add a sound from Media box:  
(Con’t)  
1. Select one of the sound storage sites.  
Sounds stored at the site are  
displayed.  
2. Select the sound you want to add.  
3. Press the Select soft key to add it.  
You may not be able to add some  
downloaded sounds if they are not in  
the correct format.  
Message 1. Enter a new message. Or you can  
enter a preset message.  
To enter a preset message;  
• Press the Opt. soft key and select  
Preset messages  
.
• Select one of the preset messages.  
2. Press the Opt. soft key and select  
Done to add the message.  
Note: To move to a previous screen while  
entering a message, press and hold  
the  
C
key.  
2. Press the Opt. soft key to use the following  
options.  
Preview: shows your message as it will  
display on the recipient’s phone. To go back to  
the message screen, press the Edit soft key.  
To send the message, press the Send soft key  
and go to step 4.  
Send: allows you to send the message. Refer  
to the next steps.  
80  
Messages  
Add page: allows you to add up to 10 pages.  
You can move to each page using the Left or  
Right key on the message screen.  
Page timing: allows you to set how long one  
page of the message will display to the  
recipient before scrolling automatically to the  
next page.  
Clear subject/picture/sound/message:  
allows you to delete the subject, image,  
sound, or message, separately.  
Delete page: allows you to delete the current  
page.  
Save message: saves the message in Draft  
(Menu 1.2.4) or My folder  
(Menu 1.2.5).  
Note: To go back to the edit screen, press the  
soft key or the key.  
C
3. When you finish creating the message, select  
Send from the options.  
4. Select an entry on the Send screen.  
If the entry is empty, enter a destination as  
below. Select:  
Number: to enter a destination number.  
E-mail: to enter e-mail address.  
Phonebook: to enter a destination from  
Phonebook.  
After entering a destination, press the OK soft  
key.  
If the entry is not empty, you can choose one of  
the following. Select:  
Edit address: to edit the selected address.  
81  
Messages  
Delete address: to delete the selected address.  
Note: To clear part or all of your input, press or press  
and hold the key, If there is no input  
C
displayed, press and hold the  
the previous screen.  
C
key to move to  
5. To send the message to up to 20 different  
destinations, repeat step 4.  
6. When you have finished entering the numbers,  
press the Send soft key.  
Press the Cancel soft key to not send the  
message.  
If transmission fails, press the Retry soft key to try  
again. Or, press the Cancel soft key to save the  
message.  
Outbox (Menu 1.2.3)  
Outbox stores messages that you have sent, are  
sending, have failed in transmission, or have been  
cancelled.  
When the Outbox menu option is selected, the list  
of messages you have sent or saved displays with  
the:  
• message’s subject or ‘No subject’, if the message  
has no subject.  
• recipient’s phone number.  
• message status:  
a message which was cancelled or failed in  
transmission, or for a delivered report. When  
for a sent message,  
for  
a recipient retrieves a message that you have  
sent and the Delivery report option (see  
page 89) is set to on,  
changes to  
.
82  
Messages  
To view a message, scroll to it and press the Select  
soft key.  
To scroll through the message, press the Up or  
Down key. When the message has more than one  
page, you can press the Left or Right key to move  
through the pages, or the pages cycle  
automatically, according to a timer set by the  
sender.  
You can choose the following options by pressing  
the Opt. soft key:  
Delete: deletes the message.  
Replay: replays the message.  
Send: sends the message.  
Properties: shows you detailed information about  
the message.  
Move to My folder: moves the message to My  
folder for later use.  
Draft (Menu 1.2.4)  
This message box stores messages that you save  
and messages whose creation was interrupted by  
an incoming call or message.  
Note: Messages whose transmission failed are saved  
in Outbox.  
To view a message, scroll to it and press the Select  
soft key.  
You can choose the following options by pressing  
the Opt. soft key:  
Send: sends the message.  
83  
Messages  
Replay: replays the message.  
Delete: deletes the message.  
Properties: shows you detailed information about  
the message.  
My folder (Menu 1.2.5)  
You can move messages stored in Inbox or Outbox  
to My folder by using the Move to My folder  
option. While making a new message, you can also  
save it to My folder by using the Save message  
option.  
To view a message in My folder, scroll to it and  
press the Select soft key.  
You can choose the following options by pressing  
the Opt. soft key:  
Delete: deletes the message.  
Replay: replays the message.  
Send: sends the message.  
Cut media: extracts a picture or a sound, so that  
you can set them as wallpaper or a ringtone, or you  
can send them as part of a multimedia message.  
Cut address: extracts phone numbers, email  
addresses, or URL addresses in the text, so that you  
can call the number, or send a message to the email  
address, or save it in Phonebook.  
Properties: shows you detailed information about  
the message.  
Delete all (Menu 1.2.6)  
84  
 
Messages  
This menu option allows you to delete all of the  
messages in each message box separately. You can  
also delete all of your messages at one time.  
1. Scroll to a message box and place a check mark  
next to it by pressing the Select soft key.  
Selecting All places check marks on all of the  
message boxes.  
2. If necessary, repeat step 1 to check other boxes.  
3. When you have finished checking, press the OK  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the messages in the  
box(es).  
Otherwise, press the No soft key.  
Voice mail (Menu 1.3)  
When you receive a voice mail, your phone displays  
the  
icon and you hear an alert.  
Connect to voice mail (Menu 1.3.1)  
• In idle mode, when you receive a new voice mail,  
press the Connect soft key to access your voice  
mail server and follow the instructions provided.  
• In idle mode, hold the  
1
key down to access your  
voice mail server and follow the instructions  
provided.  
85  
 
Messages  
• Call your voice mail server number by accessing  
the Connect to voice mail menu (Menu 1.3.1  
)
and follow the instructions provided.  
Voice server number (Menu 1.3.2)  
Before using the voice mail service, you must store  
the voice mail server number obtained from your  
service provider.  
When you select an entry in the Voice server  
number menu, following options are available:  
Edit number: enter a voice mail server number or  
press the Phonebook soft key to enter a number  
from Phonebook. Then press the OK soft key.  
Change name: enter a server name and press the  
OK soft key to save it.  
Delete: when the confirming message appears,  
press the Yes soft key. To cancel, press the No soft  
key.  
Preset messages (Menu 1.4)  
Using this menu, you can preset up to nine  
messages that you use most frequently. When you  
access this menu, the preset message list displays.  
1. Scroll to a message or an empty entry by  
pressing the Up or Down key.  
2. Press the Select soft key and enter a new  
message or change the old message.  
For further details about entering characters,  
see page 39.  
3. Press the OK soft key to save the message.  
86  
 
Messages  
Broadcast (Menu 1.5)  
This network service allows you to receive text  
messages on various topics, such as the weather or  
traffic. Messages are displayed immediately as they  
are received, provided that:  
• the phone is in idle mode.  
• the Receive option (Menu 1.5.2) is set to On  
.
• the message channel is currently active on the  
channel list.  
When you get broadcast messages, you can see the  
messages in idle mode. If the message is short, you  
will be able to see it on the display: otherwise,  
press the CB soft key to read the entire message.  
In the Broadcast menu option, the following  
options are available:  
Read: lets you read received broadcast messages.  
Archive: shows the list of messages you have saved  
from the temporary list.  
Temporary: shows the latest messages. These  
messages will disappear when the phone is  
switched off.  
If the message is long, press the Up or Down key to  
scroll through the message.  
When you read a message, press the Options soft  
key to access the following options:  
Cut number: shows a list of numbers included in the  
message.  
Save: (Temporary only) saves this message to the  
Archive list.  
87  
 
Messages  
Delete: delete this message.  
Delete all: delete all message on the list.  
Receive: allows you to turn the reception of  
broadcast messages on or off.  
Channel: a check mark inside the All check box  
indicates that the channel is enabled.  
To enable or disable this channel, press the Select  
soft key, then select Enable or Disable  
.
The Add channel option allows you to add a new  
channel to the channel list. Enter the appropriate  
channel code obtained from your service provider,  
and a title for the channel.  
Language: selects your preferred language. You will  
receive cell broadcast messages only in the language  
you have selected.  
Settings (Menu 1.6)  
Short message (Menu 1.6.1)  
Using this menu, you can set up default SMS  
information. The following options are available:  
Service centre: allows you to store or change the  
number of your SMS centre. This number is required  
in order to send messages. You must obtain this  
number from your service provider.  
Validity period: allows you to set the length of time  
your messages are stored at the message centre  
while attempts are made to deliver them.  
88  
   
Messages  
Message type: allows you to set the type of  
messages you want to receive, either Text Fax  
Voice ERMES X400, or E-Mail. The network can  
,
,
,
,
convert the messages into the selected format.  
Reply path: allows the recipient of your SMS  
message to send you a reply via your message  
centre, if the service is provided by the network.  
Delivery report: if you set this to on, the network  
will send you notice regarding the delivery status of  
messages you have sent.  
Multimedia message (Menu 1.6.2)  
Using this menu, you can set up default settings for  
sending or receiving MMS messages. The following  
options are available:  
Send settings: The following options are available:  
Priority: allows you to set the priority of messages  
that you send. Messages can be set as Low,  
Normal, or High priority.  
Validity period: allows you to set the length of time  
your messages are stored at the message centre  
while attempts are made to deliver them.  
Delivery after: you can set the delay time before  
the phone sends your messages.  
Leave a copy: allows you to leave a copy of a sent  
message on your phone.  
Address hiding: when this option is set to On, your  
phone number does not display on the recipient’s  
phone.  
89  
   
Messages  
Delivery report: when this option is set to On, the  
network informs you whether or not your message  
has been delivered.  
Read reply: when this option is set to On, a  
recipient’s phone sends a message to inform you of  
when your message was opened.  
Receive settings: the following options are  
available:  
Message reception: allows you to set how you  
receive a message. You can select between  
Manual  
,
Automatic, and Reject.  
Anonymous reject: when this option is set to On  
,
your phone rejects messages sent without caller ID.  
Adverts reject: when this option is set to On, your  
phone rejects advertisements.  
Report allowed: when this option is set to Off, when  
you receive a message, your phone will not send a  
reply message when you open the message, even  
of the sender has so requested.  
MMS profiles: in this menu, you can configure  
MMS profile settings that are required when you  
send or receive multimedia messages.  
Current profile: allows you to select the profile to be  
used with the current message.  
Profile setting: allows you to set up to five profiles.  
• Profile name: enter the name of the profile.  
• Server URL: enter the address of the server.  
90  
 
Messages  
• GSM setting: allows you to change the proxy  
settings for the GSM network.  
- Gateway: enter the IP address and IP port.  
- Data call type: select a network connection  
type between ISDN and Analogue.  
- Dial number: enter the server phone number.  
- Login ID: enter the server login ID.  
- Password: enter the server password.  
• GPRS setting: allows you to change the proxy  
settings for the GPRS network.  
- Gateway: enter the IP address and IP port.  
- APN: enter the access point name used for  
the address of the GPRS network gateway.  
- Login ID: enter the user ID required to connect  
to GPRS network.  
- Password: enter the password required to  
connect to the GPRS network.  
• Bearer: select the bearer to be used for each type  
of network access.  
- GPRS only: only functions on a GPRS network.  
- GSM only: only functions on a GSM network.  
Memory status (Menu 1.7)  
You can check the memory status for messages.  
91  
 
Messages  
Short message (Menu 1.7.1)  
You can check how many messages are stored on  
the SIM card and phone’s memory.  
When you have finished, press the  
the key to exit.  
soft key or  
Multimedia message (Menu 1.7.2)  
Multimedia message boxes and Media box share a  
given amount of memory in your phone.  
The display shows the amount of free and used  
memory.  
You can see the memory status of multimedia  
message boxes and Media box by pressing the Left  
or Right key.  
92  
Call records  
Via this menu, you can view the:  
• calls you have missed, received, or dialled.  
• cost of your calls.  
• length of your calls.  
Note: You can access the phone numbers that are in  
the three types of call records by pressing the  
key in idle mode.  
Missed calls (Menu 2.1)  
This option lets you view the last 20 unanswered  
calls, if caller line identification is available.  
The number, or name if available, displays together  
with the date and time when the call was missed.  
By pressing the Options soft key, you can also:  
• delete the current call record from the list.  
• delete all of the calls.  
• paste the number into Phonebook.  
Received calls (Menu 2.2)  
This option lets you view the last 20 received calls,  
if caller line identification is available.  
The number, or name if available, displays together  
with the date and time when the call was received.  
93  
         
Call records  
By pressing the Options soft key, you can also:  
• delete the current call record from the list.  
• delete all of the calls.  
• paste the number into Phonebook.  
Dialled calls (Menu 2.3)  
This option lets you view the last 20 dialled  
numbers.  
The number, or name if available, displays together  
with the date and time when the call was made.  
By pressing the Options soft key, you can also:  
• delete the current call record from the list.  
• delete all the calls.  
• paste the number in Phonebook.  
Delete all (Menu 2.4)  
You can delete all of the numbers stored in each call  
record.  
When a confirming messages appears, press the  
Yes soft key to confirm.  
Otherwise, press the No soft key.  
94  
   
Call records  
Call time (Menu 2.5)  
This option lets you view the timers for calls made  
and received.  
Notes:  
• If your SIM card supports ALS (Alternate Line  
Service), you must first select the appropriate line.  
• The actual time invoiced for calls by your service  
provider may vary, depending on network features,  
rounding-off for billing purposes, and other reasons.  
The following timers are available:  
Last call time: the length of the last call.  
Total sent: the total length of all calls made since  
the timer was last reset.  
Total received: the total length of all calls received  
since the timer was last reset.  
Reset timers: this option used to reset the call  
timers. You need to enter the phone password and  
then press the OK soft key.  
95  
   
Call records  
Call costs (Menu 2.6)  
This feature lets you view the cost of calls.  
Notes  
:
• Shown only if it is supported by your SIM card.  
• This feature is not intended to be used for billing  
purposes.  
• AOC (Advice Of Charge) information may display in  
idle mode, depending on your SIM card or service  
provider.  
The following options are available:  
Last call cost: cost of the last call made.  
Total cost: total cost of all calls made since the  
cost counter was last reset. If the total cost exceeds  
the maximum cost set via the Set max cost  
option, you can not make calls until you reset the  
counter.  
Max cost: maximum cost set via the Set max cost  
option.  
Reset counters: this option is used to reset the  
cost counter; you must first enter your PIN2 (see  
page 150) and then press the OK soft key.  
Set max cost: this option is used to enter the  
maximum cost that you authorise for your calls;  
you must first enter your PIN2 (see page 150) and  
then press the OK soft key.  
Price/Unit: this option is used to set the cost of  
one unit (the units by which your cost is calculated.  
It may be 5 or 10 or 20 seconds, and is set by the  
Network); this price per unit is applied when  
calculating the cost of your calls; you must first  
enter your PIN2 (see page 150) and then press the  
OK soft key.  
96  
 
Sound settings  
You can use the Sound settings feature to  
customise various settings, such as the:  
• ring tone, volume, and type for incoming calls or  
messages.  
• sounds made when your call is connected or  
when you press a key.  
• quiet mode to which your phone switches when  
you hold down the  
key.  
Incoming calls (Menu 3.1)  
This option allows you to set up the ringer for  
incoming calls.  
Note: If your SIM card supports ALS (Alternate Line  
Service), you must first select the line you wish  
to change.  
The following options are available:  
Each time you select a melody from the list, the  
melody plays.  
Default melodies: allows you to select one of the  
predefined melodies.  
My sounds: allows you to select a sound received  
from other sources, such as WAP sites, EasyStudio  
PC software, or received multimedia messages.  
Ring volume: allows you to adjust the ring  
volume. Use the Up and Down keys or the volume  
keys on the left side of the phone. The more bars  
you see, the louder the volume will be.  
97  
       
Sound settings  
Alert type: lets you specify how you are informed  
of incoming calls.  
Melody: the phone plays the melody selected via  
the Melody option. See above.  
Vibration: the phone vibrates, but does not ring.  
Vibration then melody: the phone first vibrates and  
then plays the melody selected via the Melody  
option.  
Messages (Menu 3.2)  
This option allows you to set up separate alert types  
for incoming short and multimedia messages.  
Short message (Menu 3.2.1)  
/
Multimedia message (Menu 3.2.2)  
The following options are available:  
Tone: lets you choose from many different tones.  
Each time you select a tone from the list, the tone is  
played.  
Alert type: lets you specify how you are informed  
of any incoming messages.  
Silent: only the text notification appears; the phone  
neither rings nor vibrates.  
Tone: the phone plays the tone selected via the  
Tone option. See above.  
Vibration: the phone vibrates, but does not ring.  
Vibration then tone: the phone first vibrates and  
then plays the tone selected via the Tone option.  
Repetition: allows you to specify how often the  
phone informs you of a new message. You can  
choose either Once or Periodic  
.
98  
   
Sound settings  
Power on/off (Menu 3.3)  
This option allows you to select the melody that the  
phone sounds when you switch it on or off.  
You can choose either Basic or Cheerful. If you  
don’t want the phone to play any sound at all when  
turning on or off, select Off  
.
Connection tone (Menu 3.4)  
This menu option allows you to specify whether or  
not the phone beeps when it connects to the  
network.  
The following options are available:  
Off: the phone does not beep.  
On: the phone beeps when your phone connects to  
a network.  
Key tone (Menu 3.5)  
This menu option allows you to select the tone that  
the keypad sounds when you press the dial keys.  
The following options are available:  
Off: the keys do not make any sound.  
Tone: each key, when pressed, makes a different  
sound.  
Beep: each key, when pressed, makes the same  
sound.  
99  
     
Sound settings  
Piano / Drum: each key, when pressed, makes the  
sound of a piano or a drum, depending on which  
you choose.  
To adjust the key tone volume, press the volume  
keys on the left side of the phone in idle mode with  
the folder open.  
Minute minder (Menu 3.6)  
This menu option allows you to specify whether or  
not the phone beeps every minute during a call to  
keep you informed of the length of your call.  
The following options are available:  
Off: the phone does not beep.  
On: the phone beeps every minute.  
Quiet mode (Menu 3.7)  
When you hold the  
key down in idle mode, the  
phone switches to quiet mode. You can specify  
whether the phone vibrates or mutes all sounds in  
quiet mode.  
The following options are available:  
Vibration: the phone vibrates rather than rings  
when in quiet mode.  
Mute: the phone mutes all sound in quiet mode.  
100  
   
Sound settings  
Alerts on call (Menu 3.8)  
This menu allows you to choose whether or not the  
phone informs you when you receive a new  
message or when an alarm goes off during a call.  
The following options are available:  
Off: the phone doesn’t alert you to incoming  
messages or alarms.  
On: the phone alerts you with a beep. The alert  
occurs only in your earpiece, so the person with  
whom you are talking doesn’t hear it.  
101  
 
Phone settings  
Many different features of your phone can be  
customised to suit your preferences via the  
Phone settings menu.  
Greeting message (Menu 4.1)  
This menu option allows you to set a greeting  
message to be displayed briefly when the phone is  
switched on.  
When you access this menu, the current message  
displays.  
To  
Press the  
C key and hold it down.  
clear the existing  
message  
enter a new  
message  
appropriate alphanumeric  
keys.  
save your input  
OK soft key.  
cancel your input  
and return to the  
idle mode  
key.  
For further information on how to enter text, see  
page 39.  
Display (Menu 4.2)  
You can change the background image and the  
colour of the display components, according to your  
preferences and needs.  
10  
       
Phone settings  
Wallpaper (Menu 4.2.1)  
This option allows you to change the background  
image displayed in idle mode.  
The following options are available:  
Animations: allows you to select an animated  
scene.  
Images: allows you to select one of images in the  
Images box in the Media box menu which have  
been downloaded from WAP sites, EasyStudio PC  
software, or received multimedia messages.  
Text position: allows you to select the position of  
the text displayed on the idle screen, such as the  
operator’s name, current date and time, and text  
notifications of missed calls or new messages.  
Choose either Top or Bottom. If you set this option  
to Off, your phone displays only the wallpaper  
image.  
Text style: allows you to set the style of the text  
displayed on the idle screen.  
Note: When you set the wallpaper image to  
Calendar, the Text position and Text style  
options are not applied.  
Skin (Menu 4.2.2)  
You can change the colour setting of the display  
components, such as soft key indications areas, or  
menu names, and icons.  
Backlight (Menu 4.2.3)  
You can specify how long the backlight stays on.  
Select how long the backlight remains on after the  
last key has been pressed or the folder left open.  
103  
 
Phone settings  
LCD brightness (Menu 4.2.4)  
This option allows you to adjust the brightness of  
the display screens.  
To adjust the display contrast:  
1. Select the LCD to be adjusted, Main LCD or  
External LCD, and press the Select soft key.  
2. Adjust the brightness by using the Up and Down  
keys or the volume keys on the left side of the  
phone.  
3. When you are satisfied, press the OK soft key to  
save the selection.  
Language (Menu 4.3)  
You can select a different language for the display  
text. English Chinese S (Simplified Chinese),  
,
Chinese T (Traditional Chinese), and Bahasa  
Malaysia are available.  
Security (Menu 4.4)  
The security settings enable you to restrict the use  
of your phone to the people and types of calls of  
your choice.  
Various codes and passwords are used to protect  
the features of your phone. They are described in  
the following sections. See also page 149 - 151.  
104  
       
Phone settings  
PIN check (Menu 4.4.1)  
When the PIN Check feature is enabled, you must  
enter your PIN each time you switch the phone on.  
Consequently, any person who does not have your  
PIN cannot use your phone without your approval.  
Note: Before disabling the PIN Check feature, you  
must enter your PIN.  
The following options are available:  
Disable: the phone connects directly to the  
network when you switch it on.  
Enable: you must enter the PIN each time the  
phone is switched on.  
To change your PIN, see the Change PIN menu  
option.  
Change PIN (Menu 4.4.2)  
This feature allows you to change your current PIN  
to a new one, provided that the PIN Check feature  
is enabled. You must enter the current PIN before  
you can specify a new one.  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
Phone lock (Menu 4.4.3)  
When the Phone lock feature is enabled, the phone  
is locked and you must enter the 4-8 digit phone  
password each time the phone is switched on.  
The password is preset to “00000000” at the  
factory. To change the phone password, see the  
Change password menu option.  
105  
     
Phone settings  
Once the correct password has been entered, you  
can use the phone until you switch it off.  
The following options are available:  
Disable: you are not asked to enter the phone  
password when you switch the phone on.  
Enable: you are required to enter the phone  
password when you switch the phone on.  
Change password (Menu 4.4.4)  
The Change password feature allows you to change  
your current phone password to a new one. You  
must enter the current password before you can  
specify a new one.  
The password is preset to “00000000” at the  
factory. Once you have entered a new password,  
you are asked to confirm it by entering it again.  
Privacy (Menu 4.4.5)  
This feature allows you to lock or unlock the usage  
of the contents, such as multimedia messages,  
images, and sounds.  
To enable or disable the privacy feature, you must  
enter your phone password.  
SIM lock (Menu 4.4.6)  
To enable the SIM lock feature, you must enter a  
new four- to eight-digit SIM lock code, and confirm  
it by entering it again.  
The following options are available:  
106  
   
Phone settings  
Disable: you can use any other SIM cards with  
your phone.  
Enable: you must enter the SIM lock code to use  
another SIM card with your phone.  
To unlock the SIM, enter the SIM lock code.  
FDN mode (Menu 4.4.7)  
The FDN (Fixed Dial Number) mode, if supported by  
your SIM card, allows you to restrict your outgoing  
calls to a limited set of phone numbers.  
The following options are available:  
Disable: you can phone any number.  
Enable: you can only call phone numbers stored in  
Phonebook. You must enter your PIN2.  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu option is not displayed.  
To change your PIN2, see the Change PIN2 menu  
option below.  
Change PIN2 (Menu 4.4.8)  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the  
current PIN2 before you can specify a new one.  
Once you have entered a new PIN2, you are asked  
to confirm it by entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu option is not displayed.  
107  
Phone settings  
Auto redial (Menu 4.5)  
With the Auto Redial function, the phone makes up  
to ten attempts to redial a phone number after an  
unsuccessful call.  
Note: The interval between two call attempts varies.  
The following options are available:  
Off: the number is not redialled.  
On: the number is redialled automatically.  
Active folder (Menu 4.6)  
This menu allows you to set whether you can  
answer an incoming phone call by opening the  
folder, or not.  
The following options are available:  
Off: you must press a key, depending on the  
setting of the Anykey answer option, to answer a  
call.  
On: you can answer a call by opening the folder.  
Side key (Menu 4.7)  
This menu option allows you to change the function  
of the volume keys on the left side of the phone  
when you receive an incoming call.  
108  
         
Phone settings  
The following options are available:  
Reject: the incoming call is rejected when you hold  
down one of the volume keys.  
Silence: the ring tone is silenced when you hold  
down one of the volume keys; the call is not  
rejected.  
Anykey answer (Menu 4.8)  
You can answer incoming calls by pressing almost  
any key on the phone.  
Off: you can only press  
or the Accept soft key  
to answer incoming calls.  
On: you can press any key, except  
and the  
Reject soft key to answer incoming calls.  
Reset settings (Menu 4.9)  
This menu option allows you to reset your phone to  
its default configuration. You can reset the sound  
settings, phone settings, or all of the settings  
together.  
1. Select one of the settings to reset by pressing  
the Select soft key.  
2. When a confirming message appears, press the  
Yes soft key to reset settings. Then enter the  
phone password and press the OK soft key.  
The password is preset to “00000000” by  
default. To change it, see page 106.  
Otherwise, press the No soft key.  
109  
   
Organiser  
The Organiser feature enables you to:  
• view the calendar and/or write a memo or make a  
to do list.  
• set the current date and time, and find out what  
time it is in various cities around the world.  
• set the alarm so that the phone rings at a specific  
time.  
• use your phone as a calculator, unit convertor,  
timer, or stopwatch.  
New memo (Menu 5.1)  
This menu option allows you to create a memo.  
Note: You can also access this menu by holding down  
the  
C
key in idle mode.  
1. Write a memo of up to 100 characters, and  
press the OK soft key.  
For further information about how to enter text,  
see page 39.  
2. Select the category to which you want to save  
the memo and press the Select soft key.  
The following categories are available:  
Scheduler: nomally scheduled events, such  
as appointments or meetings.  
To do list: tasks you need to do.  
Call: calls you need to make.  
110  
     
Organiser  
Anniversary: anniversaries to be  
remembered, such as wedding anniversaries,  
birthdays, or other special days.  
Note: You can save up to 25 items in each  
category, giving you a total capacity of 100  
memos.  
3. Scroll to a date on the calendar by pressing the  
navigation keys. Press the Select soft key.  
4. If applicable, depending on the category that  
you have selected, enter the event time, and  
press the OK soft key.  
5. If you have selected the 12-hour time format  
(see page 117), select AM or PM by pressing  
the Up or Down key, and then press the Select  
soft key.  
6. To set an alarm for the memo, press the Yes  
soft key.  
Otherwise, press the No soft key. The memo is  
saved immediately. Go to step 10.  
7. Enter the time for the alarm to sound, and press  
the OK soft key.  
8. If you have selected the 12-hour time format  
(see page 117), select AM or PM by pressing  
the Up or Down key, and then press the Select  
soft key.  
9. Select an alarm melody and press the Select  
soft key.  
The memo is saved and then displays on the  
screen.  
111  
 
Organiser  
10. After you have finished creating your memo,  
you can choose from the following options by  
pressing the Options soft key:  
Add: allows you to create another memo.  
Delete: allows you to delete the memo.  
Edit: allows you to edit the memo.  
Move: allows you to move the memo to a  
different date.  
Copy: allows you to copy the memo to a  
different date.  
11. When you have finished, press the  
or the key to exit.  
soft key  
Calendar (Menu 5.2)  
The calendar helps you to keep track of your  
schedule, calls that you need to make, tasks that  
you need to do, and anniversaries. You can set an  
alarm to sound on the date of a scheduled item.  
Consulting the Calendar  
To  
Press the  
move to another day Left or Right key.  
move to another  
week  
Up or Down key.  
move to the previous Up or Down key and hold  
or next month it down  
move to the previous Left or Right key and hold  
or next year it down.  
112  
 
Organiser  
The following options are available when you press  
the Options soft key on the Calendar display:  
Add memo: allows you to create a new memo on  
the day.  
Go to date: allows you to enter a particular date  
and then schedule an event on that date.  
View all: shows all of the events that you have  
scheduled.  
Delete day: deletes the events scheduled on the  
selected day.  
Delete all: deletes all of the events that you have  
scheduled.  
Creating a new memo  
1. Scroll to a date on the calendar, referring to  
page 112, and press the Select soft key.  
2. Write your memo and press the OK soft key.  
For further information about how to enter  
characters, see page 39.  
3. Select the category to which you want to save  
the memo, and press the Select soft key.  
The following categories are available:  
Scheduler: nomally scheduled events, such  
as appointments or meetings.  
To do list: tasks you need to do.  
Call: calls you need to make.  
Anniversary: anniversaries to be  
remembered, such as wedding anniversaries,  
birthdays, or other special days.  
113  
Organiser  
4. Follow the procedure from step 4 on page 111  
onwards to save the memo.  
Viewing your calendar memos  
A date that has a memo associated with it is  
highlighted in a red box. If you select a date on  
which events have already been scheduled, the  
number of memos of each type is shown at the  
bottom of the calendar.  
: General schedule events  
: To do list  
: Calls  
: Anniversaries  
Press the Select soft key to view the memos.  
If you have created more than one memo on the  
same day, you can scroll to the event you want to  
view by pressing the Left or Right key.  
The following options are available when you press  
the Options soft key:  
Add: allows you to add a new memo. For further  
information about how to add a memo, see  
page 110.  
Delete: allows you to delete the memo.  
Edit: allows you to edit the memo.  
Move: allows you to move the memo to a different  
date.  
Copy: allows you to copy the memo to a different  
date.  
114  
Organiser  
To do list (Menu 5.3)  
This menu allows you to view your list of tasks.  
To create a new memo of the To do list type:  
1. Write the memo and press the OK soft key.  
For more information about how to enter  
characters, see page 39.  
2. Follow step 4 on page 111 onwards to save the  
memo.  
Once you have defined a task, it is listed with a  
status mark (  
for Done or  
for Undo) on the  
To do list menu.  
To scroll to a specific task, press the Up or Down  
key, and press the Select soft key. The task  
displays with the deadline, alarm setting, job  
details, and status mark.  
You can scroll to the previous or next task by  
pressing the Left or Right key.  
The following options are available when you press  
the Options soft key:  
Add: allows you to add a new task. For details  
about adding To do list-type memos, see page 110.  
Mark: allows you to change the status mark.  
Edit: allows you to edit the contents of the task.  
Move: allows you to move the task to a different  
date.  
Copy: allows you to copy the task to a different  
date.  
115  
 
Organiser  
Delete: allows you to delete the task.  
Delete all: allows you to delete all of tasks from  
the list.  
Clock (Menu 5.4)  
This option allows you to change the time and date  
displayed. You can also check the current time for  
Greenwich Mean Time (GMT) and 21 major cities  
around the world.  
The following options are available:  
Set time: allows you to enter the current time. You  
can choose the time format in the Set format  
menu option; see page 117.  
Note: Before setting the time, you must specify your  
time zone in the Set world time menu option.  
Set date: allows you to enter the day, month, and  
year. You can change the date format in the Set  
format menu option; see page 117.  
Set world time: allows you to check the current  
GMT, as well as the current time in 21 major cities  
around the world. Scroll through the cities using the  
Left or Right key.  
The screen shows the:  
• city name.  
• time difference between the selected city and  
your city if you have set the local time (see  
below) or GMT (by default).  
• current date and time.  
116  
 
Organiser  
To select your time zone:  
1. Select the city corresponding to your time zone  
by pressing the Left or Right key one or more  
times.  
The local date and time display.  
2. Press the Set soft key.  
3. To  
Select  
update the current Set local  
date/time with this  
new setting  
.
indicate that the  
time zone is  
Set DST. The  
shown next to the time  
icon is  
currently using the difference.  
daylight saving  
time  
indicate that the  
time zone is no  
longer using the  
daylight saving  
time  
Remove DST (only  
available when the  
icon is shown next to the  
time difference).  
4. When you have finished, press the  
the key to exit.  
soft key or  
Set format: allows you to change the time and  
date formats.  
Time format: 24 hours  
12 hours  
Date format: DD/MM/YYYY (day/month/year)  
YYYY/MM/DD (year/month/day)  
117  
 
Organiser  
Alarm (Menu 5.5)  
This option allows you to set an alarm to sound at a  
specific time. You can set up to three alarms or set  
the phone to sound an alarm when it is switched off.  
To set an alarm:  
1. Select either Morning call  
,
Alarm1, or Alarm2  
by pressing the Up or Down key.  
The  
set. The  
icon means that no alarm is currently  
icon means that an alarm has  
already been set.  
2. Press the Select soft key.  
3. Press the Options soft key.  
4. Scroll to an option by pressing the Up or Down  
key and press the Select soft key. Change the  
setting, as needed.  
Alarm day: place or remove a check mark on  
the day(s) of the week by pressing the Select  
soft key. If you want to set a daily alarm, select  
Everyday. If you want to set an alarm to  
sound only a single time, select One-time  
alarm. When you press the OK soft key after  
making your selection, your phone asks you to  
enter the alarm time.  
Alarm time: enter the time for the alarm to  
sound.  
Alarm tone: select an alarm melody.  
Remove alarm: deactivates the alarm.  
Note: Alarms1 and 2 will alert you with the alarm tone  
you set, or with vibration, depending upon the  
incoming call alert type (Menu 3.1.4). Morning  
call, however, will alert you with the melody you  
set, regardless of the incoming call setting.  
118  
 
Organiser  
5. Repeat step 4 to change each setting.  
6. When you have finished, press the  
soft key or  
the  
key to exit.  
Once an alarm has been set, you will see the Alarm  
icon ( ) on the top line of the display. To turn off  
the alarm when it sounds, open and close the  
phone, or press any key.  
Note: When quiet mode has been activated, Alarms 1  
and 2 will not sound. However, Morning call will  
sound regardless of whether or not quiet mode  
has been activated.  
To set the alarm to ring even if your phone is  
switched off:  
1. Scroll to Auto power on the Alarm list and  
press the Select soft key.  
2. If necessary, press the Up or Down key to select  
On  
.
To turn the Auto Power feature off, select Off  
.
3. Press the Select soft key to save the setting.  
4. When you have finished, press the  
the key to exit.  
soft key or  
Once you have activated the auto power alarm, a  
check mark appears next to Auto power. If the  
phone is off at the specified alarm time, it  
automatically switches on and sounds the alarm. It  
then automatically switches off again.  
119  
Organiser  
Calculator (Menu 5.6)  
You can use the phone as a calculator. The  
calculator performs basic arithmetic functions, such  
as addition, subtraction, multiplication, division,  
and remainder computation.  
To perform a calculation:  
1. Enter the first number using the number keys.  
Note: To erase any mistakes or clear the display,  
press the  
C
key.  
2. Press the  
the key as often as necessary to select the  
appropriate operation: (add), (subtract),  
(multiply), (divide), (remainder), , or ).  
key to enter a decimal point (.) or  
+
-
/
%
(
3. Enter the second figure.  
4. Repeat steps 2 and 3, if necessary.  
5. Press the Equals soft key to view the result.  
The result appears in the Answer box.  
Note: The result is rounded off to six decimal  
places.  
6. When you have finished, press the  
the key to exit.  
soft key or  
Conversion (Menu 5.7)  
This menu option allows you to convert one type of  
measurement to another.  
120  
   
Organiser  
To convert a value:  
1. Scroll to the type of conversion to be performed:  
Length Weight Volume Area, or  
,
,
,
Temperature. Press the Select soft key.  
2. Enter the value to be converted and press the  
Down key to enter it into the From field.  
You can enter a decimal point (.) using the  
key.  
3. Select the original unit of measurement by  
pressing the Left or Right key. Then press the  
Down key to move to the To field.  
Refer to the table on the following page for the  
units available.  
4. Select the unit of measurement to which you  
want the value converted by pressing the Left or  
Right key.  
5. Press the OK soft key or the  
key to view the  
result.  
The result appears in the Answer box.  
6. When you have finished, press the  
the key to exit.  
soft key or  
Units available  
Type  
Units  
Length  
mm  
km  
cm  
in  
m
ft  
yard  
mile  
Weight  
g
kg  
oz  
ton  
grain  
pound  
121  
Organiser  
Type  
Units  
Volume  
cm3  
in3  
m3  
ft3  
l
yd3  
gal  
Area  
cm2  
in2  
m2  
ft2  
a
yd2  
acre  
Temperature  
Timer (Menu 5.8)  
°C  
°F  
Using the Timer feature, you can set the phone to  
sound an alarm after a specified period of time has  
elapsed.  
1. Press the Set soft key.  
2. Enter the length of time you want to count down  
hours:minutes and press the OK soft key.  
3. Press the Start soft key to start counting down.  
Even if you exit the Timer screen, the timer will  
continue running. After the specified time has  
expired, the phone informs you by playing a melody  
and displaying a text notification.  
To stop the timer melody when it sounds, open and  
close the phone or press any key.  
To stop the timer before the set time has expired,  
press the Stop soft key on the Timer screen. The  
phone will retain the timer setting at the time you  
stopped it. If you want to clear the setting, press  
the Set soft key. The timer will display 00:00. Press  
the OK soft key.  
122  
 
Organiser  
Note: The timer uses power from the battery;  
consequently, the phone’s operating time will  
be reduced.  
Stopwatch (Menu 5.9)  
The stopwatch can be used to measure times for  
various sports.  
Up to four intervals (such as lap times) can be  
measured.  
The precision of the stopwatch is one-hundredth of  
a second. The maximum measurement time is 10  
hours.  
1. To start the stopwatch, press the OK soft key.  
2. To check an interval time, press the OK soft key.  
The stopwatch continues to run, but the interval  
time is displayed on the first line. Repeat this  
step for subsequent intervals, or to finish.  
3. Press the Reset soft key to clear the stop  
watches.  
4. Press the  
C
or  
key to exit.  
123  
 
Network services  
These menu functions are network services.  
Please contact your service provider to check their  
availability and subscribe to them, if you wish.  
Call diverting (Menu 6.1)  
Note: Call divert options may be different depending  
on your SIM card. Those not supported by your  
network operator may not be shown on your  
phone.  
This network service enables incoming calls to be  
rerouted to a number that you specify.  
Example: You may wish to divert your business calls  
to a colleague while you are on holiday.  
Call diverting can be set up in the following ways:  
Divert always: all calls are diverted.  
Busy: calls are diverted if your phone is engaged  
on another call.  
No reply: calls are diverted if you do not answer  
the phone.  
Unreachable: calls are diverted if you are not in an  
area covered by your service provider.  
Cancel all: all call diverting options are  
deactivated.  
You can specify individual call diverting options for  
each of the following call types:  
• Voice calls only  
• Data calls only (not available when line 2 is in  
use)  
124  
     
Network services  
Example: You can divert voice calls to your  
colleague if you are already using the  
phone.  
Setting call diverting options  
1. Select the type of call diverting by pressing the  
Up or Down key and then press the Select soft  
key.  
2. Select the type of calls to be diverted by  
pressing the Up or Down key and then press the  
Select soft key.  
3. Press the Activate soft key to confirm your  
settings.  
4. Enter the number to which the calls are to be  
diverted.  
To enter an international code, hold down the  
key until the + sign displays.  
0
You can also select a number in Phonebook or  
the voice mail server number, by pressing the  
Options soft key, followed by Phonebook or  
Voice server  
.
5. When you are satisfied, press the OK soft key.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
Deactivating specific call diverting  
options  
1. Select the call diverting option to be  
deactivated.  
2. Select the type of calls to which this option  
applies.  
125  
Network services  
3. Press the Remove soft key.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
You can also deactivate all call diverting options by  
selecting the Cancel all option.  
Call barring (Menu 6.2)  
The call barring network service allows you to  
restrict your calls.  
Call barring can be set up in the following ways:  
All outgoing: calls cannot be made.  
International: international calls cannot be made.  
International except to home: when abroad,  
calls can be made only to numbers within the  
current country and to your home country, that is  
the country where your home network provider is  
located.  
All incoming: calls cannot be received.  
Incoming while abroad: calls cannot be received  
when you are using your phone outside the country  
of your service network.  
Cancel all: all call barring options are deactivated;  
calls can be made and received normally.  
You can specify individual call barring options for  
each of the following call types:  
• Voice calls  
• Data calls (not available when line 2 is in use)  
126  
 
Network services  
Setting call barring options  
1. Select the type of call barring by pressing the Up  
or Down key and then press the Select soft key.  
2. Select the type of calls to be barred by pressing  
the Up or Down key and then press the Select  
soft key.  
3. Press the Activate soft key to confirm your  
settings.  
4. Enter the call barring password supplied by your  
service provider and press the OK soft key.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
Deactivating specific call barring options  
1. Select the call barring option to be deactivated.  
2. Select the type of calls to which this option  
applies.  
3. Press the Deactivate soft key.  
4. Enter the call barring password supplied by your  
service provider.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
You can also deactivate all call barring options by  
selecting the Cancel all option.  
Changing the barring password  
127  
 
Network services  
You can set and change the call barring password  
obtained from your service provider.  
1. Select Change barring password from the  
Call barring screen, and press the Select soft  
key.  
2. Enter the current password and press the OK  
soft key.  
3. Enter a new password and press the OK soft  
key.  
4. Enter the new password again to confirm it and  
press the OK soft key.  
Call waiting (Menu 6.3)  
This network service informs you when someone is  
trying to reach you while you are on another call.  
You can specify individual call waiting options for  
each of the following call types:  
• Voice calls  
• Data calls (not available when line 2 is in use)  
Activating the call waiting feature  
1. Select the type of calls to which the call waiting  
option is to be applied by pressing the Up or  
Down key and then press the Select soft key.  
2. Press the Activate soft key to confirm your  
settings.  
128  
   
Network services  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
Deactivating specific call waiting options  
1. Select the type of call to which the option  
applies.  
2. Press the Deactivate soft key.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
You can also deactivate all call waiting options by  
selecting the Cancel all option.  
Network selection (Menu 6.4)  
The Network selection feature enables you to  
manually select the network used when roaming  
outside your home area or to let the phone  
automatically select the roaming network.  
Note: You can select a network other than your home  
network only if it has a valid roaming  
agreement with your home network.  
To choose to automatically or manually select the  
network when roaming:  
1. Press the Up or Down key until the appropriate  
option highlights and press the Select soft key.  
If you select Automatic, you are connected to  
the first available network when roaming.  
If you select Manual, the phone scans for the  
available networks. Go to step 2.  
129  
 
Network services  
2. Press the Up or Down key until the preferred  
network highlights and press the Select soft  
key.  
You are connected to that network when  
roaming.  
Caller ID (Menu 6.5)  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
Note: Some networks do not allow the user to change  
this setting.  
The following options are available:  
Default: the default setting provided by the  
network is used.  
Hide number: your number does not display on  
the other person’s phone.  
Send number: your number is sent each time you  
make a call.  
Active line (Menu 6.6)  
Some SIM cards may be used with two subscriber  
numbers. This functions is available only if your SIM  
card supports it.  
This menu option allows you to select the line to be  
used to make calls. However, calls can be answered  
on both lines, regardless of the selected line.  
130  
   
Fun box  
The Fun box menu contains several amusement  
options:  
• WWW services  
• Media box  
• Java world  
WWW Services (Menu 7.1)  
Your phone comes equipped with a WAP (Wireless  
Application Protocol) Browser, making it possible for  
you to access the Wireless Web.  
Each time you start the WAP Browser, the phone  
connects to the Wireless Web and the service  
indicator icon (  
or  
) appears on the display to  
inform you that you are connected to the Wireless  
Web and will be billed accordingly. Rates vary  
according to your service option.  
The WAP Browser ends the network connection  
after a certain period of inactivity and automatically  
reconnects as necessary. For this reason, you may  
find that you are billed for several network  
connections within a single session. This is normal  
and is designed to minimise your bill.  
Home (Menu 7.1.1)  
When you select this menu option, the phone  
connects to the network and loads the homepage of  
the Wireless Web service provider.  
Once connected, the homepage displays. The  
content depends on the service provider.  
131  
     
Fun box  
Note: To quickly launch the WAP browser from the  
idle mode, press the  
key.  
To scroll through a displayed screen, use the Up and  
Down keys.  
To exit the browser, press the  
key at any  
time. The phone returns to idle mode.  
Navigating the WAP browser  
To  
Press the  
scroll through and Up or Down key until the item  
select browser  
items  
you want highlights, and then  
press the soft key.  
select a numbered corresponding numeric key.  
item  
return to the  
previous page  
(or Back) soft key or  
key.  
C
return to the  
key and select the Home  
startup homepage browser option. For details,  
see page 132.  
Entering text in the WAP browser  
When you are prompted to enter text, the current  
text input mode appears above the right soft key.  
For further information on how to enter text, see  
page 39.  
Using the WAP browser menus  
There are various menu options available when  
surfing the Wireless Web.  
132  
 
Fun box  
To access the WAP Browser menu:  
1. Press the key or scroll to the logo on the top  
left of all Web pages and then press the (  
)
soft key.  
A list of options appears.  
2. Highlight the required option using the Up or  
Down key.  
3. Press the  
soft key to select the option.  
4. If necessary, select a secondary option by  
pressing the Up or Down key and then press the  
soft key.  
Note: Available WAP Browser operations may vary,  
depending on your version of the browser.  
Following WAP Browser operations are available:  
Back: returns to the previous page.  
Home: takes you back to the homepage of the  
Wireless Web service provider.  
Exit: exits the WAP browser.  
Reload: reloads the current page.  
Show URL: shows the URL address of the Web  
page you are currently accessing.  
Advanced: the following options are available:  
Clear cache: clears the information stored in the  
cache. The cache is the phone’s temporary memory,  
used to store the most recently accessed Web  
pages.  
About...: shows informations about the browser.  
133  
Fun box  
Using WAP browser options  
Several options are available when you are surfing  
the Wireless Web. To access these options, press  
the  
key once connected to the Wireless Web.  
Goto URL: allows you to manually enter the URL  
address of the site that you wish to access.  
Bookmark: allows you to use the Bookmark  
menu option. For details, see page 134.  
Messages: allows you to read or write an SMS  
message. For details, see page 68.  
Media box: allows you to use your Media box. For  
details, see page 138.  
Answering a call during a WAP connection  
You can receive an incoming call while you are using  
the WAP browser.  
Answer the call by pressing the  
key, as you  
normally would. After ending the call, you can  
continue navigating on the Web page you were  
previously accessing.  
Bookmark (Menu 7.1.2)  
This menu option allows you to store the URL  
addresses of up to 10 of your favourite Web sites.  
To store a URL address:  
1. Select an empty location and press the Select  
soft key.  
2. Enter the address and press the OK soft key to  
save it.  
134  
 
Fun box  
3. Assign a name to the bookmark and press the  
OK soft key.  
For further information about how to enter text,  
see page 39.  
Once you have stored an address, the following  
options are available when you select it.  
Go: allows you to access the site directly.  
Edit: allows you to change the name and URL  
address of the bookmark.  
Delete: allows you to delete the bookmark.  
Go to URL (Menu 7.1.3)  
This menu option allows you to manually enter the  
URL address of the Web site that you wish to  
access.  
Enter the URL address and press the OK soft key.  
For further information about how to enter text, see  
page 39.  
Clear cache (Menu 7.1.4)  
This menu option allows you to clear the  
information stored in the cache. The cache is the  
phone’s temporary memory, used to store the most  
recently accessed Web pages.  
Proxy settings (Menu 7.1.5)  
This menu option allows you to set up five proxy  
servers.  
135  
Fun box  
Note: You do not need to change the browser settings  
in most cases. Change the settings only when  
your network provider asks you to.  
For each proxy, the following options are available:  
Proxy name: enter the name of the HTTP proxy  
server.  
GSM setting: you can change the proxy settings for  
the GSM network.  
Gateway: enter the IP Address and IP Port  
Data call type: select a network connection type:  
ISDN or Analogue  
.
Dial number: enter the PPP server phone number.  
Login ID: enter the PPP server login ID.  
Password: enter the PPP server password.  
GPRS setting: you can change the proxy settings  
for the GPRS network.  
Gateway: enter the IP Address and IP Port.  
APN: enter the access point name used for the  
address of the GPRS network gateway.  
Login ID: enter the user ID required to connect to  
the GPRS network.  
Password: enter the password required to connect to  
the GPRS network.  
Home URL: you can change the address of your  
startup homepage.  
When the default homepage displays, you can delete  
it using the  
C
key and enter your own choice. To  
enter any special characters, / for example, use  
Symbolic mode; see page 50.  
136  
Fun box  
Bearer: you can select the bearer to be used for  
each type of network access.  
GPRS first: your phone will search for the GPRS  
network first. If this service is not available, you can  
use a GSM service temporarily.  
GPRS only: the phone only works in GPRS networks.  
GSM only: the phone only works in GSM networks.  
Current proxy (Menu 7.1.6)  
This menu option allows you to activate one of the  
proxies you set up to use the WAP connection.  
Push messages (Menu 7.1.7)  
This menu allows you to set to be received and read  
push messages. A push message can be either a  
broadcast message that originates from the web  
server, or a message containing images or other  
media that the user has purchased from a service  
provider.  
The following options are available:  
Inbox: Your phone receives push messages and  
saves them in Inbox. You can also read push  
messages in Inbox.  
Setting: This option allows you to set the push  
message receiving options.  
Always: Push messages are always allowed entry.  
Never: Push messages are blocked.  
Optional: Push messages whose sending matches to  
the number in this option are allowed entry. The  
preset number is the SMS service centre’s number.  
Delete all: deletes all push messages.  
137  
Fun box  
Media box (Menu 7.2)  
This menu option stores various media items from  
outside sources, such as WAP sites, or multimedia  
messages you have received.  
Images (Menu 7.2.1)  
This option allows you to view images extracted  
from EMS or MMS messages, downloaded from WAP  
sites, or from EasyStudio PC software.  
To view the image, press the View soft key.  
When you view a photo, press the Options soft key  
to do the following:  
Send: allows you to send the image as a  
multimedia message.  
Rename: allows you to rename it.  
Delete: allows you to delete it.  
Set as wallpaper: allows you to set it as  
wallpaper.  
Properties: allows you to view the detailed  
information about the images.  
Sounds (Menu 7.2.2)  
This option allows you to listen to recorded voices  
and melodies received from outside sources, such  
as WAP sites or multimedia messages you have  
received.  
Voices: allow you to listen to voice recordings.  
My sounds: allow you to listen to various melodies.  
138  
   
Fun box  
When you select a sound, press the Options soft  
key to send, rename, delete, set as a ringtone (only  
in My sounds) or view its properties.  
Delete all (Menu 7.2.3)  
This option deletes all images and sounds from the  
Media box.  
Images: Press the Yes soft key to delete all  
images, otherwise press the No soft key.  
Sounds  
:
1. Scroll to a sound box and place a check mark  
next to it by pressing the Select soft key.  
Selecting All places check marks in all of the  
boxes.  
2. If necessary, repeat step 1 to check other box.  
3. When you have finished checking, press the OK  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the sounds in the  
box(es).  
Otherwise, press the No soft key.  
Memory status (Menu 7.2.4)  
Media box and multimedia message boxes share a  
given amount of memory in your phone.  
This display shows the status of free and used  
memory.  
You can see memory status for the Media box and  
multimedia message boxes by pressing the Left or  
Right key.  
139  
Fun box  
JAVA world (Menu 7.3)  
You can download MIDlets (Java applications that  
run on mobile phones) from various sources using  
the WAP Browser and store them on your phone.  
Downloads (Menu 7.3.1)  
A list of Java games is displayed. Two MIDlets (Java  
games) have been pre-loaded on your phone. If the  
Jave games list is empty, a pop-up message is  
displayed inviting you to download a new game. To  
add MIDlets to the list, download them from the  
Web.  
To  
Press the  
find a game  
run a game  
Up or Down key.  
Launch soft key  
.
view detail  
information  
Info soft key.  
delete the game  
Delete soft key in the  
information display.  
BubbleSmile  
BubbleSmile is an arcade puzzle game.  
Accessing a game  
After loading the game, you will see the following  
options. Press the  
key to select one of them:  
Start game: allows you to start a new game in  
timed mode or skilled mode.  
140  
 
Fun box  
• Timed mode: You have until time runs out to play.  
You must align bubbles of the same colour to  
make them disappear, and when you do, your  
time increases.  
• Skilled mode: you have to make more than 4  
bubbles disappear at once for skill bar gauge to  
increase. If less than 4 bubbles disappear, then  
the gauge falls.  
Continue: allows you to continue the last game  
you played. The menu is only available when a  
game has already been played.  
High score: shows you the high score table.  
How to play: shows you the instructions for this  
game.  
Option: allows you to turn the sound on or off.  
Playing the game  
Your score goes up when you make bubbles  
disappear. You must align at least 3 bubbles  
horizontally or diagonally to make them vanish. You  
will see a band surrounding three bubbles, and you  
can rotate the bubbles within the band to make  
them line up within the matrix, to match colours.  
You can also move the band to surround three  
different bubbles. When the game ends, if your  
score was within the top three, it will appear on the  
display.  
Key commands  
2, 4, 6, 8, or navigation key: move the band up,  
down, left, or right  
1: rotate the bubbles in the band counterclockwise  
3: rotate the bubbles in the band clockwise  
141  
Fun box  
SnowBallFight  
The goal of this game is to challenge and defeat the  
snowball fight champions of four different teams.  
Accessing a game  
After loading the game, press any key twice to go to  
the first menu screen. At the first menu screen,  
press the  
key to play a game, or press the  
key  
to access the game’s main menu.  
Play: allows you to start a new game or a saved  
game. The saved game option allows you to  
continue playing from where you left off the last  
time you played the game.  
Instructions: shows you the explanation of control  
keys and offensive and defensive items.  
Configuration: allows you to turn the sound or  
vibration on or off, and to select the speed of the  
game from 1 to 5.  
Quit: quits the game and returns to the downloads  
menu screen.  
Playing the game  
Move the character along the street using the  
navigation key. If you have enough coins, earned  
while fighting, you can buy defensive items at the  
drug store, and offensive items at the item shop.  
Move the character to the currently fighting team  
and press the  
key to join in. When the snowball  
fight starts, hit the rival kids with snowballs and  
avoid theirs. While fighting, you can make use of  
any items you have. If you raise enough mana, you  
can also use special attack. You must win alll fights  
in four stages in order to challenge the champions.  
142  
Fun box  
Key Commands  
4/6 or Left/Right: move left or right.  
2, 5, Up or  
:control the distance at the first  
press and throw the snowball at the next press.  
8, Down: use a special attack depending on your  
mana.  
3: enters item mode in order to use the items in  
your inventory. Select the item you want to use by  
pressing 2, 5, Up or  
key.  
Special attacks  
Level 1: Aurora, all enemies are hit by snowballs.  
Level 2: Ice dragon, all enemies are hit by  
snowballs and frozen for 8 seconds.  
Level 3: Icicle storm, double powered snowball  
attack on all enemies. Enemies’ attack accuracy is  
decreased for 10 seconds.  
Internet settings (Menu 7.3.2)  
The Internet address to connect to the Java server  
is automatically set when the data set up call is  
made. The address is provided by the network  
operator automatically, but you can change it  
manually in this menu.  
Memory status (Menu 7.3.3)  
You can check memory space available for Java  
downloads. The display also shows the total  
memory and used memory.  
143  
Using ALS (Alternate  
Line Service)  
The ALS feature enables two lines to be associated  
with one SIM card. Consequently, you can make  
and receive calls on either line. If you subscribe to  
this network service, a few additional menu options  
enable you to set up this feature.  
Note: Please contact your service provider to check  
the availability of this feature and how to  
subscribe to ALS.  
Selecting a line  
You can select a line for each call via the Active  
line menu option (Menu 6.6). For further details,  
refer to page 130.  
Editing the line name  
You can enter a name for each line via the Own  
number (Phonebook 2.1)menu option.  
When you edit the name of a line, this name  
replaces “Line 1” or “Line 2”. For further details,  
refer to page 65.  
Setting the ring type  
To distinguish between incoming calls on the two  
lines, you can select a different ring tone for each  
line via the Incoming calls menu option (Menu  
3.1). See page 97 for further details.  
144  
 
Using ALS (Alternate Line Service)  
Setting call diverting options  
You can set up call diverting via the Call diverting  
menu option (Menu 6.1). This service reroutes  
incoming calls on the line of your choice to a  
specified number. For further details, see page 124.  
Viewing call information  
You can view call times and last call cost  
information for each line. For further details, see  
page 95.  
145  
Solving problems  
Before calling for service, perform the following  
simple checks for the problems listed. You may save  
the time and expense of an unnecessary service  
call.  
When you switch your phone on, one of  
the following messages appears:  
Insert SIM  
Check that the SIM card is correctly installed.  
Phone locked: enter password  
The Phone lock feature is enabled. You must enter  
the phone’s password before you can use the  
phone.  
Enter PIN  
• You are using your phone for the first time. You  
must enter the Personal Identification Number  
supplied with the SIM card.  
• The PIN check feature is enabled. Every time the  
phone is switched on, you must enter the PIN. To  
disable this feature, use the PIN check menu  
option (Menu 4.4.1). See page 105.  
Enter PUK  
The PIN was entered incorrectly three times in  
succession and the phone is now blocked. Enter the  
PUK supplied by your network operator.  
146  
 
Solving problems  
“No service” displays  
• The network connection has been lost. You may  
be in a weak reception area (in a tunnel or  
surrounded by buildings). Move and try again.  
• You are trying to access an option for which you  
have not taken out a subscription with your  
service provider. Contact the service provider for  
further details.  
You have entered a number but it was  
not dialled  
• Have you pressed the  
key?  
• Are you accessing the right cellular network?  
• You may have set an outgoing call barring option.  
Your correspondent can not reach you  
• Is your phone switched on (the  
for more than one second)?  
key pressed  
• Are you accessing the right cellular network?  
• You may have set an incoming call barring option.  
Your correspondent can not hear you  
speaking  
• Have you switched off the microphone (Mute  
appears)?  
• Are you holding the phone close enough to your  
mouth? The microphone is located at the bottom  
of the phone.  
147  
Solving problems  
The phone starts beeping and “Battery  
low” flashes on the display  
The battery is insufficiently charged. Replace the  
battery and recharge it.  
The audio quality of the call is poor  
• Check the signal strength indicator on the display  
(
); the number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
Try moving the phone slightly or moving closer to  
a window if you are in a building.  
No number is dialled when you recall a  
Phonebook entry  
• Check that the number has been stored correctly  
by using the Phonebook Search feature.  
• Re-store the number, if necessary.  
If the above guidelines do not help you to solve  
the problem, take a note of:  
• the model and serial numbers of your phone  
• your warranty details  
• a clear description of the problem  
Then contact your local dealer or Samsung  
after-sales service.  
148  
Access codes  
There are several access codes that are used by  
your phone and its SIM card. These codes help you  
protect the phone against unauthorised use.  
Some access codes can be changed using the  
Security menu option (Menu 4.4). See page 104  
for further details.  
Phone password  
The Phone lock feature (see page 105) uses the  
phone password to protect your phone against  
unauthorised use.  
The phone password supplied with the phone is  
preset to “00000000” at the factory. To change the  
password, use the Change password menu option  
(Menu 4.4.4). See page 106.  
PIN  
The PIN (Personal Identification Number) protects  
your SIM card against unauthorised use. It is  
usually supplied with the SIM card. When the PIN  
Check feature is enabled (see page 105), you must  
enter the PIN each time you switch on the phone.  
If you key in an incorrect PIN three times in  
succession, you’ll have to key in the PUK and press  
the OK soft key to unlock the phone. Key in a new  
PIN and press the OK soft key. Key in the new PIN  
again and press the OK soft key.  
149  
         
Access codes  
PIN2  
The PIN2, supplied with some SIM cards, is required  
to access some functions, such as charging unit  
counters. These functions are only available if  
supported by your SIM card.  
If you key in an incorrect PIN2 three times in  
succession, you will have to key in the PUK2 and  
press the OK soft key to unlock the phone. Key in a  
new PIN2 and press the OK soft key. Key in the new  
PIN2 again and press the OK soft key.  
PUK  
The PUK (PIN Unblocking Key) is required to change  
a blocked PIN. The PUK may be supplied with the  
SIM card. If not, contact your local service provider.  
If you key in an incorrect PUK ten times in  
succession, the SIM card cannot be used anymore.  
Contact your service provider for a new card.  
You cannot change the PUK. If you lose the code,  
contact your service provider.  
150  
     
Access codes  
PUK2  
The PUK2, supplied with some SIM cards, is  
required to change a blocked PIN2.  
If you key in an incorrect PUK2 ten times in  
succession, you cannot use the functions requiring  
the PIN2. Contact your service provider for a new  
card.  
You cannot change the PUK2. If you lose the code,  
contact your service provider.  
Call barring password  
The 4-digit call barring password is required when  
you use the Call Barring function. You obtain the  
password from your service provider when you  
subscribe to this function.  
You can change this password using the Change  
barring password menu option (Menu 6.2.7). For  
further details, see page 127.  
151  
     
Health and safety  
information  
SAR certification information  
This phone meets European Union (EU)  
requirements concerning exposure to radio waves.  
Your mobile phone is a radio transmitter and  
receiver. It is designed and manufactured so as not  
to exceed the limits for exposure to radio-frequency  
(RF) energy, as recommended by the EU Council.  
These limits are part of comprehensive guidelines  
and establish permitted levels of RF energy for the  
general population. The guidelines were developed  
by independent scientific organisations through the  
periodic and thorough evaluation of scientific  
studies. The limits include a substantial safety  
margin designed to ensure the safety of all persons,  
regardless of age and health.  
The exposure standard for mobile phones employs  
a unit of measurement known as SAR (Specific  
Absorption Rate). The SAR limit recommended by  
the EU Council is 2.0 W/kg.*  
* The SAR limit for mobile phones used by the public is 2.0  
watts/kilogram (W/kg) averaged over ten grams of body  
tissue. The limit incorporates a substantial margin of  
safety to give additional protection for the public and to  
account for any variations in measurements. The SAR  
values may vary depending on national reporting  
requirements and the network band.  
152  
     
Health and safety information  
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value. This is because the phone is  
designed to operate at multiple power levels so as  
to use only the power required to reach the  
network. In general, the closer you are to a base  
station, the lower the power output of the phone.  
The highest SAR value for this model phone when  
tested for compliance against the standard was  
0.846 W/kg. While there may be differences  
between the SAR levels of various phones and  
various positions, they all meet the EU  
requirements for RF exposure.  
Precautions when using batteries  
• Never use any charger or battery that is damaged  
in any way.  
• Use the battery only for its intended purpose.  
• If you use the phone near the network’s base  
station, it uses less power; talk and standby time  
are greatly affected by the signal strength on the  
cellular network and the parameters set by the  
network operator.  
• Battery charging time depends on the remaining  
battery charge and the type of battery and  
charger used. The battery can be charged and  
discharged hundreds of times, but it will gradually  
wear out. When the operation time (talk time and  
standby time) is noticeably shorter than normal,  
it is time to buy a new battery.  
153  
 
Health and safety information  
• If left unused, a fully charged battery will  
discharge itself over time.  
• Use only Samsung-approved batteries and  
recharge your battery only with Samsung-  
approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave  
the battery connected to a charger for more than  
a week, since overcharging may shorten its life.  
• Extreme temperatures will affect the charging  
capacity of your battery: it may require cooling or  
warming first.  
• Do not leave the battery in hot or cold places,  
such as in a car in summer or winter conditions,  
as you will reduce the capacity and lifetime of the  
battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery  
may temporarily not work, even when the battery  
is fully charged. Li-ion batteries are particularly  
affected by temperatures below 0 °C (32 °F).  
• Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object (coin,  
clip or pen) causes a direct connection between  
the + and – terminals of the battery (metal strips  
on the battery), for example when you carry a  
spare battery in a pocket or bag. Short-circuiting  
the terminals may damage the battery or the  
object causing the short-circuiting.  
• Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
154  
Health and safety information  
Road safety  
Your wireless phone gives you the powerful ability  
to communicate by voice, almost anywhere,  
anytime. But an important responsibility  
accompanies the benefits of wireless phones, one  
that every user must uphold.  
When driving a car, driving is your first  
responsibility. When using your wireless phone  
behind the wheel of a car, make sure that you are  
following the special regulations of the given area or  
country.  
Operating environment  
Remember to follow any special regulations in force  
in any area and always switch off your phone  
whenever it is forbidden to use it, or when it may  
cause interference or danger.  
When connecting the phone or any accessory to  
another device, read its user’s guide for detailed  
safety instructions. Do not connect incompatible  
products.  
As with other mobile radio transmitting equipment,  
users are advised that for the satisfactory operation  
of the equipment and for the safety of personnel, it  
is recommended that the equipment should only be  
used in the normal operating position (held to your  
ear with the antenna pointing over your shoulder).  
155  
   
Health and safety information  
Electronic devices  
Most modern electronic equipment is shielded from  
radio frequency (RF) signals. However, certain  
electronic equipment may not be shielded against  
the RF signals from your wireless phone. Consult  
the manufacturer to discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a  
minimum distance of 15 cm (6 inches) be  
maintained between a wireless phone and a  
pacemaker to avoid potential interference with the  
pacemaker. These recommendations are consistent  
with the independent research and  
recommendations of Wireless Technology Research.  
Persons with pacemakers:  
• should always keep the phone more than 15 cm  
(6 inches) from their pacemaker when the phone  
is switched on  
• should not carry the phone in a breast pocket  
• should use the ear opposite the pacemaker to  
minimise potential interference  
If you have any reason to suspect that interference  
is taking place, switch off your phone immediately.  
Hearing aids  
Some digital wireless phones may interfere with  
some hearing aids. In the event of such  
interference, you may wish to consult your hearing  
aid manufacturer to discuss alternatives.  
156  
 
Health and safety information  
Other medical devices  
If you use any other personal medical devices,  
consult the manufacturer of your device to  
determine if it is adequately shielded from external  
RF energy. Your physician may be able to assist you  
in obtaining this information. Switch off your phone  
in health care facilities when any regulations posted  
in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that  
could be sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Posted facilities  
Switch off your phone in any facility where posted  
notices require you to do so.  
Potentially explosive atmospheres  
Switch off your phone when in any area with a  
potentially explosive atmosphere and obey all signs  
and instructions. Sparks in such areas could cause  
an explosion or fire resulting in bodily injury or even  
death.  
157  
 
Health and safety information  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are  
reminded of the need to observe restrictions on the  
use of radio equipment in fuel depots (fuel storage  
and distribution areas), chemical plants or where  
blasting operations are in progress.  
Areas with a potentially explosive atmosphere are  
often but not always clearly marked. They include  
below deck on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas  
(such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust  
or metal powders, and any other area where you  
would normally be advised to turn off your vehicle  
engine.  
Emergency calls  
This phone, like any wireless phone, operates using  
radio signals, wireless and landline networks, as  
well as user-programmed functions, which cannot  
guarantee connection in all conditions. Therefore,  
you should never rely solely on any wireless phone  
for essential communications (medical  
emergencies, for example).  
Remember, to make or receive any calls the phone  
must be switched on and in a service area with  
adequate signal strength. Emergency calls may not  
be possible on all wireless phone networks or when  
certain network services and/or phone features are  
in use. Check with local service providers.  
To make an emergency call, proceed as follows:  
158  
 
Health and safety information  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present  
location (for example, 112 or any other official  
emergency number). Emergency numbers vary  
by location.  
3. Press the  
key.  
If certain features are in use (call barring, for  
example), you may first need to deactivate those  
features before you can make an emergency call.  
Consult this document and your local cellular  
service provider.  
When making an emergency call, remember to give  
all the necessary information as accurately as  
possible. Remember that your phone may be the  
only means of communication at the scene of an  
accident; do not end the call until given permission  
to do so.  
Other important safety information  
• Only qualified personnel should service the phone  
or install the phone in a vehicle. Faulty  
installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
• Check regularly that all wireless phone equipment  
in your vehicle is mounted and operating  
properly.  
• Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as  
the phone, its parts, or accessories.  
159  
 
Health and safety information  
• For vehicles equipped with an air bag, remember  
that an air bag inflates with great force. Do not  
place objects, including both installed or portable  
wireless equipment in the area over the air bag or  
in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag  
inflates, serious injury could result.  
• Switch off your phone before boarding an aircraft.  
The use of wireless phones in aircraft may be  
dangerous to the operation of the aircraft, and is  
illegal.  
• Failure to observe these instructions may lead to  
the suspension or denial of telephone services to  
the offender, or legal action, or both.  
Care and maintenance  
• Keep the phone and all its parts and accessories  
out of the reach of small children  
• Keep the phone dry. Precipitation, humidity, and  
liquids contain minerals that will corrode  
electronic circuits.  
• Do not use the phone with a wet hand. Doing so  
may cause an electric shock to you or damage to  
the phone.  
• Do not use or store the phone in dusty, dirty  
areas, as its moving parts may be damaged.  
160  
 
Health and safety information  
• Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt  
certain plastics.  
• Do not store the phone in cold areas. When the  
phone warms up to its normal operating  
temperature, moisture can form inside the  
phone, which may damage the phone’s electronic  
circuit boards.  
• Do not drop, knock, or shake the phone. Rough  
handling can break internal circuit boards.  
• Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the phone. Wipe it  
with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
• Do not paint the phone. Paint can clog the  
device’s moving parts and prevent proper  
operation.  
• Do not put the phone in or on heating devices,  
such as a microwave oven, a stove, or a radiator.  
The phone may explode when overheated.  
• Use only the supplied or an approved  
replacement antenna. Unauthorised antennas or  
modified accessories may damage the phone and  
violate regulations governing radio devices.  
• If the phone, battery, charger, or any accessory is  
not working properly, take it to your nearest  
qualified service facility. The personnel there will  
assist you, and if necessary, arrange for service.  
161  
Glossary  
To help you understand the main technical terms  
and abbreviations used in this booklet and take full  
advantage of the features of your mobile phone,  
here are a few definitions.  
ALS (Alternate Line Service)  
Capability of associating two lines with one SIM  
card. With this service, you can make and receive  
calls on either line, as required.  
Call barring  
Ability to restrict outgoing and incoming calls.  
Call diverting  
Ability to reroute calls to another number.  
Call holding  
Ability to put one call on standby while answering or  
making another call; you can then switch between  
the two calls, as required.  
Call waiting  
Ability to inform users that they have an incoming  
call when engaged on another call.  
CLI (Caller Line Identification) services  
Services allowing subscribers to view or block the  
telephone numbers of callers.  
162  
 
Glossary  
EMS (Enhanced Message Service)  
Network service sending and receiving messages  
that include images, sounds, and/or animations to  
and from another user without having to speak to  
the correspondent.  
GPRS (General Packet Radio Service)  
New non-voice value-added service that allows  
information to be sent and received across a mobile  
telephone network. GPRS guarantees continuous  
connection to the Internet for mobile phone and  
computer users. It is based on the Global System  
for Mobile Communication (GSM) circuit-switched  
cellular phone connections and the Short Message  
Service (SMS).  
GSM (Global System for Mobile  
Communication)  
International standard for cellular communication,  
guaranteeing compatibility between the various  
network operators. GSM covers most European  
countries and many other parts of the world.  
IrDA(Infrared Data Association)  
A standard defined by the IrDA consortium. It  
specifies a way to wirelessly transfer data via  
infrared radiation. The IrDA specifications include  
standards for both the physical devices and the  
protocols they use to communicate with each other.  
163  
Glossary  
MMS (Multimedia Message Service)  
A message service for the mobile environment,  
standardized by the WAP Forum and the 3rd  
Generation Partnership Program (3GPP). For phone  
users, MMS is similar to Short Message Service  
(SMS)--it provides automatic, immediate delivery of  
user-created content from phone to phone. The  
message addressing used is primarily phone  
numbers; thus the traffic goes from phone to  
phone. MMS also provides support for e-mail  
addressing, so that messages can also be sent by  
e-mail. In addition to the text content of SMS, MMS  
messages can contain still images, voice or audio  
clips, and in the future also video clips and  
presentation information.  
Multiparty calling  
Ability to establish a conference call involving up to  
five additional parties.  
PIN (Personal Identification Number)  
Security code that protects the phone/SIM against  
unauthorised use. The PIN is supplied by the  
service provider with the SIM card. It may be a four  
to eight-digit number and can be changed, as  
required.  
PUK (PIN Unblocking Key)  
Security code used to unlock the phone when an  
incorrect PIN has been entered three times in  
succession. The eight-digit number is supplied by  
the service provider with the SIM card.  
Roaming  
Use of your phone when you are outside your home  
area (when travelling for example).  
164  
Glossary  
SDN (Service Dialling Numbers)  
Telephone numbers supplied by your network  
provider and giving access to special services, such  
as voice mail, directory inquiries, customer support,  
and emergency services.  
SIM (Subscriber Identification Module)  
Card containing a chip with all the information  
required to operate the phone (network and  
memory information, as well as the subscriber’s  
personal data). The SIM card fits into a small slot in  
the back of the phone and is protected by the  
battery.  
SMS (Short Message Service)  
Network service for sending and receiving  
messages to and from another subscriber without  
having to speak to the correspondent. The message  
created or received can be displayed, received,  
edited, or sent.  
Soft Keys  
Two keys marked  
purpose of which:  
and  
on the phone, the  
• varies according to the function that you are  
currently using  
• is indicated on the bottom line of the display just  
above the corresponding key  
Voice mail  
Computerised answering service that automatically  
answers your calls when you are not available,  
plays a greeting (optionally in your own voice), and  
records a message.  
165  
Glossary  
166  
167  
 
168  

Sony PSYC User Manual
Sony Ericsson COMMUNICAM MCA 25 User Manual
Sony DREAM MACHINE ICF C793 User Manual
SanDisk SSD ULTRA320 SCSI 35" DC 000255 User Manual
Samsung SGH D410C User Manual
Samsung SCH r300 User Manual
Samsung E1070M User Manual
Rosewill HDD RAID RSV S4 X User Manual
Philips SOUNDMACHINE AZ302 User Manual
Philips GOGEAR SA5285 User Manual