COMPACT DISC PLAYER
PT-668C
Panel Information
11 7 8 12 9 10 13
COMPACT DISC PLAYER
RANDOM
INTRO SCAN
DISP LAY
REPEAT
MEMORY CLEAR
MEMORY
RESET
O PEN/CLOS E
STOP
O N
/
S TANDBY
1
2
3
4
5
6
1. ON/STANDBY SWITCH
9. DISPLAY
Press button to switch “ON” the unit. Press again to
switch “OFF” unit into “STANDBY MODE”.
2. Fast BWD
The player will skip backward when Fast BWD key is
pressed. Continuously pressing this button makes the
player scan through the tracks backward fast.
3. Fast FWD
Press DISPLAY button once, the display will show out
the Track Remain Time. And press once more, Disc
Remain Time will be shown on the Musical Calendar.
Press once again can resume the operation.
10. REPEAT
Press REPEAT button once, the display will show out
REPEAT 1, then the track which is in play mode or
ready mode will repeat until you switch off the CD
player or press STOP. Press REPEAT button once more,
Repeat ALL will be shown on the display, all track will
be repeated until you switch off the CD player or press
STOP button.
The player will skip ahead to the next track each time
the Fast FWD button is pressed. Continuously pressing
this button makes the player scan through the tracks
forward fast.
4.
PLAY/PAUSE
Press PLAY/PAUSE button to play and press it once
again if you wish it to pause. The relative signs will be
shown on display. If in pause mode, press this key once
again to resume the operation.
11. MEMORY CLEAR
12. MEMORY
Press the MEMORY button at first, the MEMORY and
the corresponding track will be flashed. Then press the
FastFWD or FastBWD to reach your desired track and
press MEMORY button once more to store the first
track. If wishing to store the second track, press the
FastFWD or FastBWD to the second desired track and
press Memory button to store the second track.
Repeat the same procedure to similar settings. Continue
to enter track numbers until all the pre-decided tracks
are stored for playback. Press the STOP upon finishing
programming. Press PLAY button once, the different
tracks that have been stored will be played according to
the memories stored. If you wish to clear all the
memories, please press the OPEN/CLOSE switch once.
13. RESET
5. STOP
Press STOP key to stop playing/fastFWD/fastBWD or
any kinds of such operations.
6. OPEN/CLOSE
Press the OPEN/CLOSE button. The disc tray will slide
out. When it has opened fully, place a compact disc
carefully in the tray, and press it once to close.
7. RANDOM
The songs will be playback by random for whole disc
without repeat if you press this key once. And you can
stop it by press stop key.
8. INTRO
If you desire the introduction scanning, you can press
INTRO button. Then each track will be scanned 10
seconds. An “INTRO” will be shown on the display.
Press it once again can resume the operation, the
relative light will gone off.
Operating Procedures
RISK OF ELECTRIC SHOCK
DO NOT OPEN
OUTPUT
REMOTE SYSTEM
TO AMP
INTEGRATED CIRCUIT
AC 220V~ 230V 50Hz
AUDIO
IN
EQ
CD
FM
Ω
75
REC
EQ
AM
P LAY
REMOTE SYSTEM
LO O P
REC
P LAY
IN
AUX
C D
Operating Procedure
ꢀ
ꢀ
Switch on the Amplifier.
ꢀ
To close the disc tray, press the OPEN/CLOSE button
again. When the tray is securely closed the disc will
start turning automatically and the total number of
selections and the total disc time will be counted. A few
seconds later the Play indicator will light, and the
TRACK NO. and TIME counter will show “10:00”.
Press the PLAY/PAUSE button. Playback will start, the
PLAY indicator “►” will go on.
Select “CD” from function selection column at the
Amplifier, relative light will be seen when selected.
Turn on the CD player by press the POWER Switch (1).
Press the OPEN/CLOSE button. The disc tray will slide
out. When it has opened fully, place a compact disc
carefully in the tray.
ꢀ
ꢀ
ꢀ
**Note**
a). Always place the compact disc in the disc tray with ꢀ When playback of the last track is finished, the CD
the label facing upward.
player head will return to the beginning of the first track,
and the TRACK NO and TIME counters will show
“00:00”.
b). The CD tray accepts two different sizes of disc:
120mm & 80mm.
Specifications
Output voltage………………………. 2 Vrms (0dB)
Freq. Response……………………… 20 to 20 Khz
+3dB- -3dB
S/N ration (FLAT)……………..…… 75 dB (1Khz)
Channel Seperation………………… 58 dB (1Khz)
Channel balance…………………… 0.5 dB (1Khz)
Distortion…………………………… (-10dB) 0.08% (1Khz)
Power consumption………. 8W
Dimensions…………………………. W: 430mm
H: 116mm
L: 267mm
Weight……………………………… 3 kg (NW)
3.5kg (GW)
Design and specifications are subject to change without notice.
|