UTStarcom CDM8945 User Manual

WELCOME  
TABLE OF CONTENTS  
Thank you for choosing the CDM8945. This exceptional new  
phone boasts an impressive array of features that are versatile,  
easy to use and allows you to enjoy some of the hottest mobile  
services available today.  
CHAPTER 1. BEFORE USING YOUR PHONE .................................5  
INSIDE THE PACKAGE.....................................................................................6  
HANDSET DESCRIPTION.................................................................................7  
DISPLAY INDICATORS ...........................................................................................9  
BATTERY USAGE...........................................................................................11  
BATTERY INSTALLATION....................................................................................11  
BATTERY REMOVAL.............................................................................................11  
BATTERY CHARGING...........................................................................................12  
C
h
a
p
t
e
r
1
POWER CONNECTION ......................................................................................12  
BATTERY HANDLING INFORMATION..........................................................13  
DOs.........................................................................................................................13  
DON’Ts...................................................................................................................13  
All Digital and supporting the high-speed communications  
provided by the CDMA2000 1xEVDO network system, this  
phone offers lightning fast downloads for enhanced  
multimedia, web browsing and data services. Two LCD  
displays present rich full-color content on either the large  
inner main display screen, or the smaller outer sub-display  
screen. A built-in 330K Pixel camera with embedded flash  
and video capture, a WAP 2.0 browser, GPS technology for  
quick location identification when calling 911, a built-in  
speaker phone and voice activated dialing for easy hands-  
free operation, two-way short, enhanced or multimedia  
messaging services so you can send and receive messages  
in a variety of forms, T9 predictive text input for effortless text  
entries and a USB port for expanded data capabilities  
complete this nimble device.  
CHAPTER 2. BASIC OPERATION ..................................................15  
TURNING THE PHONE ON / OFF ..................................................................16  
TURNING THE PHONE ON...................................................................................16  
TURNING THE PHONE OFF..................................................................................16  
ACCESSING THE MENU................................................................................17  
MENU SUMMARY .........................................................................................18  
BASIC FUNCTIONS........................................................................................20  
MAKING A CALL ...................................................................................................20  
ANSWERING CALLS.............................................................................................21  
SPEAKER PHONE..................................................................................................21  
WAIT/PAUSE FEATURE........................................................................................22  
ANSWERING A CALL............................................................................................22  
3-WAY CALLING ...................................................................................................23  
CALLER ID FUNCTION..........................................................................................23  
CALL WAITING FUNCTION..................................................................................23  
ADJUSTING VOLUME..........................................................................................24  
ENTER LOCK MODE .............................................................................................24  
DURING A CALL.............................................................................................25  
MUTE (UNMUTE)..................................................................................................25  
Chapter 2  
SEND TXT MSG ....................................................................................................25  
SEND PIX/FLIX MSG.............................................................................................25  
CONTACTS............................................................................................................25  
RECENT CALLS .....................................................................................................25  
SEND DTMF...........................................................................................................26  
VOICE PRIVACY.....................................................................................................26  
LOCATION .............................................................................................................26  
MAKING AN EMERGENCY CALL..................................................................27  
911 IN LOCK MODE ..............................................................................................27  
911 USING ANY AVAILABLE SYSTEM ...............................................................27  
USING THE TRANS-FLASH CARD................................................................28  
INSTALLING THE TRANS-FLASH CARD.............................................................28  
REMOVING THE TRANS-FLASH CARD...............................................................28  
HOW IS MUSIC TRANSFERRED?......................................................................29  
In addition, this phone is equipped with Video on Demand  
and Music on Demand capabilities that allow you to select  
and play video or audio clips from a mobile entertainment  
library that is accessible right from your phone.  
These features give you the most of exciting Verizon services  
like V Cast, which allows you to download full motion video  
clips of breaking news, weather, sports highlights,  
entertainment clips and 3D games, or Get It Now, which  
allows you to download, ringtones, ringback tones,  
wallpapers, games and provides Picture Caller ID.  
CHAPTER 3. MEMORY FUNCTION...............................................31  
STORING A PHONE NUMBER ......................................................................32  
ENTERING LETTERS, NUMBERS & SYMBOLS...........................................33  
STANDARD INPUT MODE....................................................................................34  
WORD INPUT MODE ............................................................................................35  
NUMERIC MODE...................................................................................................36  
SYMBOL MODE ....................................................................................................36  
MAKING A CALL THROUGH THE PHONE BOOK ........................................37  
Chapter 3  
ONE-TOUCH/TWO-TOUCH DIALING...................................................................37  
ONE-TOUCH DIALING:.......................................................................................37  
TWO-TOUCH DIALING:......................................................................................37  
So unleash all the powerful features of your new CDM8945  
and enjoy the latest in wireless technology and mobile  
entertainment, all from this one awesome handset.  
CHAPTER 4. MENU FUNCTION ....................................................39  
CONTACTS .....................................................................................................40  
NEW CONTACT.....................................................................................................40  
CONTACT LIST......................................................................................................41  
GROUPS ................................................................................................................42  
1
REV.00 5U01000300A  
TABLE OF CONTENT  
CHAT .............................................................................................................116  
ERASE ALL....................................................................................................117  
SETTINGS.....................................................................................................118  
AUTO SAVE.........................................................................................................118  
AUTO ERASE.......................................................................................................118  
AUTO VIEW TXT .................................................................................................119  
AUTO RECEIVE....................................................................................................119  
SIGNATURE.........................................................................................................120  
C
H
1
CALLBACK#.........................................................................................................120  
Chapter 6  
VOICE MAIL#.......................................................................................................121  
BLOCK/UNBLOCK ...............................................................................................121  
ENTRY MODE......................................................................................................122  
QUICK TEXT ........................................................................................................122  
FONT SIZE ...........................................................................................................123  
Chapter 1  
CHAPTER 7. MOBILE WEB 2.0 ....................................................125  
STARTING INTERNET BROWSER...............................................................126  
LAUNCHING MOBILE WEB 2.0..........................................................................126  
BROWSER MENU.........................................................................................126  
VZW HOME..........................................................................................................126  
BACK....................................................................................................................126  
FORWARD ...........................................................................................................126  
REFRESH..............................................................................................................127  
BEFORE USING  
YOUR PHONE  
HISTORY..............................................................................................................127  
Chapter 7  
ADDRESS.............................................................................................................127  
CLEAR MEMORY.................................................................................................127  
SETTINGS............................................................................................................128  
ADVANCED..........................................................................................................129  
EXIT......................................................................................................................129  
CHAPTER 8. SAFETY AND WARRANTY ....................................131  
SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES..............132  
DRIVING SAFETY................................................................................................133  
ELECTRONIC DEVICES .......................................................................................134  
OTHER SAFETY GUIDELINES............................................................................135  
PRECAUTIONS....................................................................................................136  
SAFETY INFORMATION FOR FCC RF EXPOSURE ....................................137  
CAUTIONS...........................................................................................................137  
This chapter provides important information about using the  
CDM8945 including:  
INSIDE THE PACKAGE  
SAR INFORMATION.....................................................................................138  
Chapter 8  
FCC HEARING-AID COMPATIBILITY (HAC) REGULATIONS FOR  
HANDSET DESCRIPTION  
BATTERY USAGE  
WIRELESS DEVICES.....................................................................................140  
FDA CONSUMER UPDATE..........................................................................142  
PROTECT YOUR WARRANTY .....................................................................146  
12 MONTH LIMITED WARRANTY...............................................................147  
BATTERY HANDLING INFORMATION  
“Licensed by QUALCOMM Incorporated under one or more of the following Patents : U.S.Patent No.  
4,901,307 U.S.Patent No. 5,056,109 U.S.Patent No. 5,099,204 U.S. Patent No. 5,101,501 U.S. Patent No.  
5,103,459 U.S. Patent No. 5,107,225 U.S.Patent No. 5,109,390.”  
4
5
HANDSET DESCRIPTION  
INSIDE THE PACKAGE  
This package should include all items pictured below.  
If any are missing or different, immediately contact the retailer  
where you purchased the phone.  
The CDM8945 weighs 4 ounces. The dimensions are 3.5" x 1.9" x .9".  
C
H
C
H
Earjack  
1
1
Antenna  
Phone  
Speaker  
Camera  
Button  
Volume  
Key  
Trans-Flash  
Card Slot  
Earpiece  
Camera  
Lens  
AC Travel Charger  
Handset  
LCD Screen  
Camera  
Flash  
Sub LCD  
Function Keys  
User Manual  
Navigation Key  
END/  
Power Key  
Standard Battery  
Handstrap  
Send Key  
Microphone  
6
7
HANDSET DESCRIPTION  
HANDSET DESCRIPTION  
Display Indicators  
See page 9 for a list of icons.  
C
H
C
H
DISPLAY INDICATORS  
1
1
Text & Graphic area  
Signal Strength - Current signal strength: the more lines,  
the stronger the signal.  
EV : The “EV” service mode indicator shall display with/ without a  
progress bar when a 1x-EVDO device has only acquired 1x-EVDO  
service (e.g., roaming to a 1x- EVDO service area only).  
Soft Key Indicators  
Shows the functions currently  
assigned to each soft key and  
displays some icons.  
EV & 1X : The “EV” and “1X” signal strength indicators shall display  
with/without a progressive bar when a 1x-EVDO device has acquired  
both 1x-RTT CDMA2000 and 1x-EVDO services.  
EV & D : The “EV” and “D” signal strength indicators shall display  
with/without a progressive bar when a 1x-EVDO device has acquired  
both 1x-EVDO service and CDMA IS-95 service.  
Message  
Contacts  
Menu  
Roaming  
Phone is out of home area.  
In Idle Mode  
Voice Privacy  
Web Browser  
-
Press Up to access the Web Browser, Down  
to access the Short Cut Key, Right for Get It  
Now and Left for Get PIX &FLIX.  
Indicates “Voice Privacy” mode.  
Get PIX & FLIX  
Get It Now  
SSL (Secured Socket Layer)  
Inside the menu  
-
Within a menu, press the Navigation Key  
UP/DOWN/LEFT/RIGHT to scroll through  
options or press OK to select the function.  
Indicating that secure communication between  
client and server has been established during  
data communication using encryption.  
Short Cut Key  
Press to make or receive a call.  
Dormant  
Phone is in a dormant state during a data call.  
Phone reverts to Dormant mode when there hasn’t  
been activity on a page for some time – the  
connection is still active and you can make and  
receive calls.  
Press to turn the phone on/off, to terminate a call  
or to return to the initial page.  
(Left Soft Key) Press to access the message  
menu or function displayed on bottom line.  
(Right Soft Key) Press to access contacts menu  
or function displayed on bottom line.  
No Service  
Phone cannot receive a signal from the system.  
Press to turn Speakerphone On or Off.  
Data Active  
Voice  
Short/Long press : Go to Take PIX/Video Viewfinder.  
TTY  
Press to clear a digit from the display or to return  
to the previous page.  
TTY mode is active  
Press and hold to enable speaker phone mode.  
Standalone  
The mode that restricts transmitting and  
receiving inside the airplane.  
A long press shall display a plus “+”.  
Press and hold to enter Lock Mode.  
8
9
HANDSET DESCRIPTION  
BATTERY USAGE  
C
H
C
H
GPS Icon  
BATTERY INSTALLATION  
Location Service of your phone is disabled/  
enabled.  
1
1
1
Place the battery on the back of the handset  
and then slide into place.  
u
Battery  
Push the battery  
v
Battery charging level – the more blocks, the  
stronger the charge.  
down until it locks into place.  
Lock  
Missed Calls  
Alarm Only  
Phone will alert you with an alarm tone when call  
is received.  
Alarm  
Appears when either a calendar or an alarm is set.  
Vibrate Only  
Phone will vibrate when call is received.  
BATTERY REMOVAL  
1
All Sound Off  
Ringer volume is set to off.  
Pull up the release latch, lift up the battery  
u
and then  
handset.  
remove the battery from the  
v
Voicemail  
Indicates you have voicemail messages.  
New Messages  
New message or voice message.  
Calendar Appointment  
Event Alarm is active.  
Data Only  
Phone is ready to receive a data call.  
Speakerphone  
Phone is in speakerphone mode.  
If the battery is not correctly placed in the compartment, the  
handset will not turn on and/or the battery may detach during use.  
Auto Answer  
Phone is in answering machine mode.  
10  
11  
BATTERY USAGE  
BATTERY HANDLING INFORMATION  
C
H
C
H
BATTERY CHARGING  
POWER CONNECTION  
DOs  
l
Only use the battery and charger approved by the  
manufacturer.  
1
1
l
l
Only use the battery for its original purpose.  
Try to keep batteries in a temperature between  
41ºF (5ºC ) and 95ºF (35ºC).  
If the battery is stored in temperatures above or  
below the recommended range, give it time to warm  
up or cool down before using.  
Plug the AC Charger into a standard outlet.  
1
2
Plug the other end of the AC Charger into the  
bottom of your phone. The battery must be  
installed onto the phone.  
l
l
l
l
l
Completely drain the battery before recharging.  
It may take one to four days to completely drain.  
Store the discharged battery in a cool, dark, and dry  
place.  
Purchase a new battery when its operating time  
gradually decreases after fully charging.  
Properly dispose of the battery according to local  
laws.  
DON’Ts  
When you charge the battery with the phone power off, you  
will see a charging status screen. You cannot operate the  
phone until it is powered on.  
The battery is not charged at the time of purchase.  
Fully charge the battery before use.  
It is more efficient to charge the battery with the handset  
powered off.  
The battery must be connected to the phone in order to charge it.  
Battery operating time gradually decreases over time.  
l
l
Don’t attempt to disassemble the battery –  
it is a sealed unit with no serviceable parts.  
Don’t accidentally short circuit the battery by  
carrying it in your pocket or purse with other  
metallic objects such as coins, clips and pens.  
This may critically damage the battery.  
Don’t leave the battery in hot or cold temps.  
Otherwise, it could significantly reduce the capacity  
and lifetime of the battery.  
l
l
If the battery fails to perform normally, you may need to replace  
the battery.  
Don’t dispose of the battery into a fire.  
12  
13  
NOTE  
C
H
1
C
H
2
Chapter 2  
BASIC OPERATION  
This chapter addresses and explains the basic features of your phone  
including:  
TURNING THE PHONE ON / OFF  
ACCESSING THE MENU  
MENU SUMMARY  
BASIC FUNCTIONS  
DURING A CALL  
MAKING AN EMERGENCY CALL  
USING THE TRANS-FLASH CARD  
14  
15  
TURNING THE PHONE ON / OFF  
ACCESSING THE MENU  
Your phone can be customized via the menu. Each function can be  
accessed by scrolling with the Navigation Key or by pressing the  
number that corresponds with the menu item.  
TURNING THE PHONE ON  
Press and hold  
appears and the tone sounds.  
until your “Power On” logo  
1
GET IT NOW  
MESSAGING  
C
H
C
H
If “Password” appears on the display enter your 4-digit  
password to unlock your phone.  
The default password is the last 4 digits of your  
phone number.  
CONTACTS  
2
2
RECENT CALLS  
SETTINGS & TOOLS  
To access the menu in the idle mode,  
1
TURNING THE PHONE OFF  
press  
[MENU].  
Press and hold  
appears.  
until your “Power Off” logo  
1
To scroll through the menu use the Navigation  
Key.  
2
3
Immediately change or recharge the battery when  
“LOW BATTERY!! PHONE IS TURNING OFF!” appears on  
the display. Memory may possibly be damaged if the phone  
turns off due to the battery completely draining.  
To return to the previous page, press  
To exit the current menu and return to the idle  
mode, press  
.
.
Turn the phone off before removing or replacing the battery.  
If the phone is on, unsaved data may be lost.  
Press the Navigation Key to enter a function  
when its main page is displayed or press its  
assigned number to have direct access to  
the function.  
4
Hotkey  
In idle mode, move the Navigation Key as follows to access  
these functions:  
Upward movement : Web Browser  
Downward movement : Short Cut Key  
Rightward movement : Get It Now  
Leftward movement : Get PIX & FLIX  
16  
17  
MENU SUMMARY  
MENU SUMMARY  
6. Service Alerts  
1. ERI  
GET IT NOW  
1. Get Tunes &  
Tones  
1. Get V CAST Music  
2. Minute Beep  
3. Call Connect  
1. Power On Sound  
2. Power Off Sound  
1. Alarm Tone  
2. Alarm Vibrate  
1. Personal  
2. ERI Banner  
1. LCD  
2. Keypad  
2. Get New Ringtones 1. Get New App.  
3. My Ringtones  
4. My Music  
1. Get New Ringtones  
7. Power On/Off  
Sounds  
8. Alarm Sounds  
5. My Sounds  
6. Sync Music  
7. Manage Music  
1. Get V CAST Video  
2. Get New PIX  
3. My PIX  
4. My FLIX  
5. My Graphics  
6. Take PIX  
1. Record New  
3. Display  
1. Banner  
2. Get PIX & FLIX  
C
H
C
H
1. Get New App.  
2. Backlight  
2
2
3. Contrast  
4. Wallpaper  
1. My PIX  
2. My FLIX  
1. My PIX  
2. My FLIX  
7. Record FLIX  
8. PIX Place  
1. Get New App.  
5. Screensaver  
3. Get Fun &  
Games  
4. Get News & Info  
5. Get Going  
6. Get Extras  
6. Display Themes  
7. Fonts  
8. Power On/Off  
Animations  
1. Standalone Mode  
2. System Select  
3. NAM Selection  
1. Power On  
2. Power Off  
1. Get New App.  
1. Get New App.  
4. System  
MESSAGING  
1. New TXT Msg  
2. New PIX/FLIX Msg  
3. Inbox  
4. Sent  
5. Drafts  
6. Voicemail  
7. E-mail  
8. Mobile IM  
9. Chat  
1. Auto NAM  
2. Change NAM  
1. My Number  
2. SW Version  
3. Icon Glossary  
4. Device Info  
5. Location  
6. Security  
1. Common Code  
2. Lock Mode  
3. Edit Code  
1. Get New App.  
4. Format Card  
CONTACTS  
1. New Contact  
2. Contact List  
3. Groups  
7. Language  
8. Short Cut Key  
1. Answer Options  
2. Auto Retry  
5. Call Settings  
4. Speed Dials  
3. TTY Mode  
RECENT CALLS  
1. Missed  
2. Received  
3. Dialed  
4. All  
5. View Timers  
4. One Touch Dial  
5. Voice Privacy  
6. Data Setting  
7. Voice Services  
1. Voice Dial  
2. Voice Setting  
3. Train Words  
SETTINGS & TOOLS 1. Tools  
1. Calendar  
2. Alarm Clock  
8. DTMF Tones  
1. Main Clock  
2. Front Clock  
1. Alarm 1  
2. Alarm 2  
3. Alarm 3  
6. Clock Format  
7. Ringer ID  
8. Picture ID  
3. World Clock  
4. Notepad  
5. Calculator  
6. Stop Watch  
1. Master Volume  
2. Call Sounds  
2. Sounds  
1. Call Ringtone  
2. Call Vibrate  
3. Alert Sounds  
1. TXT Message  
2. PIX Message  
3. Voicemail Msg  
4. Keypad Volume  
5. Earpiece Volume  
18  
19  
BASIC FUNCTIONS  
BASIC FUNCTIONS  
MAKING A CALL  
ANSWERING CALLS  
Enter a phone number.  
When your phone rings or vibrates, press  
to answer the incoming call.  
1
1
(Depending on your phone’s settings, you may  
also answer incoming calls by opening the  
phone or by pressing any digit key.)  
C
H
C
H
To modify the phone number you have entered :  
To erase one digit at a time press  
To erase the entire number, press and hold  
.
2
2
.
To find the phone number in your contact list :  
Enter a part of the phone number, press  
select and then “Search”.  
[OPTIONS],  
To ignore incoming calls, press  
[IGNORE].  
Phone number display in contact list  
If there is no name in the Contact’s name field, the highest  
priority phone number is displayed. If no phone numbers  
are stored, the email address appears.  
To end a call, press  
.
2
All matching entries will be displayed. To call the selected  
number, press  
.
To send the TXT or PIX/FLIX message with phone number :  
Enter a part of the phone number and then press  
[OPTIONS], select “Send TXT Msg or Send PIX/FLIX  
Msg”. Please refer to page 105 or page 106 for more  
details on “Send TXT Msg or Send PIX/FLIX Msg”.  
SPEAKER PHONE  
The speaker phone feature lets you hear audio through the speaker and  
talk without holding the phone.  
To activate the speaker phone in idle, answering  
1
Press  
The indicator,  
.
2
or calling modes, press  
.
, appears on the display.  
The phone returns to normal (Speaker Phone Off)  
after ending a call or when the phone is turned off  
and back on.  
2
If “CALL FAILED” appears on the display or the line is busy,  
press or  
If you activate the “AUTO RETRY” function, the phone will  
automatically retry for the number of times you have  
selected. (Refer to page 72).  
.
When you place or receive a call from stored phone  
numbers, both the name and phone number will be  
displayed.  
There is another way to make a call through the VR mode,  
which is called “VAD (Voice Activated Dialing)”.  
Please refer to page 74 (Voice Service) for more details.  
If “Enter Lock Code” appears on the display enter your  
4-digit password to unlock your phone.  
To end a call, press  
.
3
20  
21  
BASIC FUNCTIONS  
BASIC FUNCTIONS  
WAIT/PAUSE FEATURE  
3-WAY CALLING  
Pauses are used for automated systems (i.e., voice mail, calling cards).  
Insert a pause after a phone number and then enter another group of  
numbers. The second set of numbers is dialed automatically after the  
pause. This feature is useful for dialing into systems that require a code.  
With 3-Way Calling, you can talk to two people at the same time.  
When using this feature, the normal airtime rates will be applied for  
each of the two calls.  
C
H
C
H
Enter the number you wish to call and then  
1
To insert a wait/pause, enter a phone number  
press  
.
1
2
2
and then press  
[OPTIONS]. Select either  
Pause (“P” appears) or a Wait (“W” appears).  
Once you have established the connection,  
enter the second number you wish to call and  
2
3
Press  
to dial or  
to save.  
2
then press  
.
Please refer to page 32 for more details about  
storing a phone number.  
When you’re connected to the second party,  
press again to begin your 3-Way call.  
ANSWERING A CALL  
If one of the people you called hangs up during your call, you  
and the remaining caller stay connected. If you initiated the call  
and are the first to hang up, all three callers are disconnected.  
To answer a call, press any key except  
,
,
1
,
,
,
or  
.
l
To select an answering option, press  
select the “Settings & Tools” by pressing  
either “Flip Open”, “Any Key” or “Send Only”.  
lf “Send Only” is selected the phone can only be answered by  
[MENU] and then  
, select  
CALLER ID FUNCTION  
Identifies caller by displaying their phone number. If the caller’s name  
and number are already stored in your phone book, they both will  
appear. The caller ID is stored in the call history.  
pressing  
. See page 71 for more information.  
To end the call, press  
.
2
CALL WAITING FUNCTION  
Notifies you of an incoming call when you are already on a call by  
sounding a beep tone and displaying the caller’s phone number.  
In Auto Answer Mode a call is automatically answered after a  
preset number of ring tones. See page 71 for more details.  
To answer another call while on the phone,  
1
press  
. This places the first call on hold.  
To switch back to the first caller, press  
again.  
Call Waiting is a system dependent feature. Please contact your  
service provider for details.  
22  
23  
BASIC FUNCTIONS  
DURING A CALL  
To display menu options during a call, press  
[OPTIONS].  
ADJUSTING VOLUME  
Adjusts the volume of the ringer, key beep and speaker.  
MUTE (UNMUTE)  
The caller cannot hear you or any sounds from your side but you can  
still hear them.  
Press  
Tools” menu, press  
the following.  
[MENU] and then select “Settings &  
1
and then select one of  
C
H
C
H
Press  
[MUTE].  
1
2
2
l
l
l
Master Volume : Controls the ringer volume.  
Keypad Volume : Controls the keypad volume.  
Earpiece Volume : Controls the earpiece volume.  
l
l
To deactivate, press  
The phone will automatically un-mute in Emergency  
Call or Callback mode.  
[UNMUTE].  
Adjust volume and then press  
to save it.  
2
SEND TXT MSG  
Enables you to send a TXT message (SMS) during a call.  
To adjust earpiece volume during a call, press the Navigation  
Key up or down.  
To adjust master volume, press short side up/ down key.  
In Idle Mode:  
Press  
[OPTIONS]  
.
1
Side Volume Up key Long Press: Volume key shall bring device  
out of silence.  
Side Volume Down key Long Press: Volume key shall bring  
device into silence mode.  
SEND PIX/FLIX MSG  
Enables you to send a PIX/FLIX message (MMS) during a call.  
Press  
[OPTIONS]  
.
1
ENTER LOCK MODE  
CONTACTS  
To select a phone number in your internal Contact List:  
To lock the phone, press and hold  
.
1
To unlock the phone, press  
,
or  
[UNLOCK], and then input your password and  
then press  
Press  
[OPTIONS]  
.
2
1
.
RECENT CALLS  
The lock feature will deactivate when the phone is powered  
l
To select a phone number in your Recent Calls List:  
off. Upon next power up, you will need to press  
phone again.  
to lock  
Press  
[OPTIONS]  
.
1
24  
25  
DURING A CALL  
MAKING AN EMERGENCY CALL  
The 911 feature automatically places the phone in the Emergency  
Call Mode when you dial the preprogrammed emergency number,  
911. It also operates in the Lock Mode and out of the service area.  
SEND DTMF  
Automatically transmits your phone number to a pager during a call.  
(Dependent on pager service)  
911 IN LOCK MODE  
The 911 call service is available even in the Lock Mode.  
Press  
[OPTIONS]  
.
.
1
C
H
C
H
Enter “911” and then press  
The call connects.  
.
1
2
3
2
2
VOICE PRIVACY  
Increases security during a call.  
Press  
[OPTIONS]  
1
The phone maintain the Emergency Mode  
for 5 minutes.  
LOCATION  
When the call ends, the phone returns to the Lock Mode.  
l
Enables the network to locate your current location through Global  
Positioning System (GPS). (Refer to page 67 for more details.)  
911 USING ANY AVAILABLE SYSTEM  
Press  
[OPTIONS]  
.
1
Enter “911” and then press  
The call connects.  
.
1
2
3
The phone will stay in Emergency Mode for  
5 minutes.  
l
l
The phone returns to the Lock Mode.  
While the phone is in the Emergency Mode for 5 minutes,  
the phone can receive an incoming call from any available  
system. However, it can’t make a call.  
The 911 call is not recorded in the recent call list.  
26  
27  
USING THE TRANS-FLASH CARD  
USING THE TRANS-FLASH CARD  
HOW IS MUSIC TRANSFERRED?  
INSTALLING THE TRANS-FLASH CARD  
Open the card hole cover,  
and insert the Trans-Flash  
card like the arrow indicates.  
1
Transfer from  
PC to Handset  
via USB Cable via Memory Card  
Transfer from  
PC to Handset  
C
H
C
H
2
2
Yes.  
Song will be  
converted to  
WMA format  
Song will not  
play on the phone  
MP3 Songs  
To prevent possible damages, please keep Trans-Flash card slot  
closed at all times whether Trans-Flash card is inserted or not.  
WMA Songs  
(Music ripped  
from CDs, e.g.  
Yes  
Yes  
Yes  
REMOVING THE TRANS-FLASH CARD  
unprotected content)  
To remove the Trans-Flash  
1
WMA Songs  
(Purchased from  
a Windows Media  
Player 10 music  
store such as V  
CAST Music, e.g.  
protected content)  
card, press and release the  
card so that it is disengaged  
from the slot. Then slide it out.  
Song will not  
play on the phone  
When you insert the Trans-Flash card, make sure contact  
terminals face down.  
File names storing each media in the Trans-Flash card are  
“My-PIX” for pictures, “My-FLIX” for motion pictures.  
Do not remove the Trans-Flash card while reading or writing  
files. Otherwise it could be damaged.  
Trans-Flash card is recognized as a mobile disk when  
connected to a personal computer.  
When disconnecting from PC, please remove the USB  
storage equipment on your PC. Otherwise, the stored files  
on the Trans-Flash card could be damaged.  
l
l
l
l
l
Music acquired from another online store as part of a subscription  
service or purchased in another format other than WMA/MP3 (e.g.  
AAC, AAC+) will not be recognized by V CAST Music devices.  
To make sure the proper function of removable memory,  
please use the Trans-Flash card of San Disk.  
To format the Trans-Flash card, refer to the instructions  
under the “FORMAT CARD” on page 69.  
28  
29  
MEMO  
C
H
2
Chapter 3  
C
H
MEMORY FUNCTION  
3
This chapter addresses memory functions including:  
STORING A PHONE NUMBER  
ENTERING LETTERS, NUMBERS & SYMBOLS  
MAKING A CALL THROUGH THE PHONE BOOK  
30  
31  
STORING A PHONE NUMBER  
ENTERING LETTERS, NUMBERS & SYMBOLS  
The phone book stores up to 500 entries.  
The input mode (Alpha editor) will automatically be  
activated when necessary to enter letters and numbers.  
As shown below, there are 4 available modes ; Standard  
input mode (Abc), Input mode (Word), Numeric mode  
(123), and Symbol mode (Symbols). The input mode  
indicator appears on the upper right of the display when  
letters and numbers are entered. To select the desired  
Enter phone # and press  
“Create New” or “Update Existing” and press  
to Select.  
[SAVE]. Choose  
1
2
If “Create New” is selected, the phone number  
will appear above a list. Press the Navigation  
Key up or down to choose the type of number  
you’re adding, as indicated by the icon.  
input mode among the 5 modes below, press  
and then enter letters and numbers.  
[Abc],  
C
H
.
C
H
Press  
to select. If “Update Existing” is  
3
3
Input mode indicator  
Word : Input mode  
Abc : Abc mode  
ABC : ABC mode  
123 : Number mode  
Symbols : Symbol mode  
selected, your contact list is displayed. Choose  
the entry to add the phone number to, and then  
press  
updated in the existing list.  
Press to select.  
. You will see the phone number  
The following illustrates the function assigned to each key in the Alpha Editor.  
Enter a name.  
Please refer to page 33 for more details on  
entering letters, numbers & symbols.  
To change the input mode, press  
Press the Navigation Key down to select other  
options (Mobile1.2, E-mail1.2, etc...).  
3
KEY  
FUNCTION  
Press to change mode.  
[Abc].  
[Word][Abc][ABC][123][Symbols]  
Abc  
Press to view the next matching word if  
the highlighted word is not the word you  
intended.  
If entering a phone number, press  
to select one of the following options:  
[OPTIONS]  
Next  
Press to accept a word and add a space.  
l
l
l
l
Set Speed Dial  
Set Voice Dial  
Set As Default  
Add Pause  
Space  
Press to select a letter case of the  
standard text input or text input mode.  
[Abc], [ABC] and [abc] indicate the  
standard text input.  
Caps Lock  
[Word], [WORD] and [word] indicate the  
predictive text input.  
To store the entry, press  
“CONTACT SAVED” will be displayed.  
[SAVE].  
4
Press to delete a character to the left of  
the cursor.  
Clear  
Send  
Send the letters and numbers you enter.  
32  
33  
ENTERING LETTERS, NUMBERS & SYMBOLS  
ENTERING LETTERS, NUMBERS & SYMBOLS  
STANDARD INPUT MODE  
WORD INPUT MODE  
Use the digit keys to enter letters, numbers and characters.  
The input mode incorporates a built-in-dictionary to determine a word  
based on the entered characters. A word can be entered more  
quickly by pressing a key once per character.  
Enter letters using the key pad as follows:  
1
1
Repetitions Repetitions Repetitions Repetitions  
Select the Word mode by pressing  
[Abc].  
1
2
Key Pad  
Time  
2 times  
3 times  
4 times  
5 times  
A
D
G
:
B
E
H
:
C
F
I
2
3
4
:
A
D
G
:
2ABC  
3DEF  
4GHI  
:
Press a digit key once to enter the character  
you want and then enter all the characters to  
input the word you want.  
C
H
C
H
:
W
X
Y
3
3
Z
9
9WXYZ  
To view the next matching word, press  
.
3
4
To change the input mode, press  
When entering special character such as  
.@?!-, &:_ /;1, press  
[Abc].  
To accept the matching word, enter a space  
and then press  
.
repeatedly.  
. The cursor will  
To enter a compound word:  
To enter a space, press  
automatically move to the next column.  
2
Enter the first part of the word and then press  
Enter the last part of the word and then press  
word.  
to accept it.  
to enter the  
Repeat until letters are entered.  
There is a 16-letter limit.  
3
4
5
To enter “Fun fare” in the input mode.  
To delete one digit, press  
entire entry, press and hold  
. To delete the  
st  
.
- After you enter the 1 letter, press  
[Abc] to select input mode  
and  
to choose the lower case (Word).  
To change from lowercase to uppercase,  
press  
- Press  
Press  
and you will see “Fun” highlighted.  
to select it.  
.
- Press  
Press  
and then enter a space.  
and until you see “ease” highlighted.  
to select the next matching word, you will see “fare”  
Select Abc mode by pressing  
When you select this mode, the Abc icon appears as a visual  
confirmation.  
[Abc].  
- Find the key that corresponds to the letter you want to enter.  
- Press it as many times as needed for the letter to appear on the  
screen.  
- To enter the name “John”:  
Press [  
Press [  
Press [  
Press [  
]
J
o
h
n
]
]
]
34  
35  
ENTERING LETTERS, NUMBERS & SYMBOLS  
MAKING A CALL THROUGH THE PHONE BOOK  
NUMERIC MODE  
ONE-TOUCH/TWO-TOUCH DIALING  
Ideal for frequently dialed numbers, this feature allows phone book  
entries to be dialed via the keypad with only one or two key presses.  
Allows you to enter numbers.  
Press  
press  
[Abc] and scroll down to “123” and  
to change to Numeric Mode.  
1
2
ONE-TOUCH DIALING:  
2-9 : Press and hold the number you wish to connect  
for more than 1 second.  
To enter a number, press a digit key.  
C
H
C
H
TWO-TOUCH DIALING:  
SYMBOL MODE  
3
3
10-22 : Press the first digit and second digits of the  
memory number short and long  
respectively.  
Allows you to enter symbols.  
Press  
[Abc] and scroll down to “Symbols”  
to change to Symbol Mode.  
1
2
and press  
If no phone number is stored in the location entered,  
“Unassigned location” will appear on the screen.  
Select symbol you want to enter with the  
Navigation Key.  
l
Use the Navigation Key to view a different line of symbols.  
Press [  
Press [  
],  
].  
or  
36  
37  
MEMO  
Chapter 4  
C
H
MENU FUNCTION  
3
C
H
4
This chapter addresses accessing the menu and using its functions  
and features to customize your phone.  
CONTACTS  
RECENT CALLS  
SETTINGS  
TOOLS  
38  
39  
CONTACTS  
CONTACTS  
Stores up to 500 entries, each of which can be assigned to a group.  
Entries can be retrieved by name or group.  
CONTACT LIST  
Retrieves an entry by name and calls by simply pressing  
.
You can review all the entries stored in your phone book list or  
quickly find an entry by entering a name or its character string.  
NEW CONTACT  
Adds a new entry.  
Press  
[MENU] and then press  
1
2
Press  
“New Contact”.  
[MENU] and then press  
1
2
“Contact List” or press [CONTACTS].  
The list of names in your phone book is  
displayed alphabetically.  
To enter a name or number, use the Navigation  
Key to select the phone book field.  
l
PHONE BOOK FIELDS :  
Name/Mobile1/Home/Work/E-mail1/Group/Picture/  
Ringtone/Mobile2/Fax/E-mail2.  
Under “Mobile 1”, “Mobile 2”, “Home”, “Work” or “Fax” input  
the phone number and then by pressing  
can choose from the following:  
1. Set Speed Dial  
2. Set Voice Dial  
3. Set As Default  
Enter a name or its character string or scroll  
through the list with the Navigation Key.  
Please refer to page 33 for more details on  
entering letters, numbers & symbols.  
3
4
C
H
C
H
l
[OPTIONS], you  
4
4
To edit the entry, press  
[EDIT].  
To show detail of the entry, press  
[VIEW].  
4. Add Pause  
To use and manage contacts, press  
1. New Contact: To add a New Contact.  
2. Erase: To delete a contact.  
[OPTIONS] then select:  
Please refer to page 33 for more details on entering  
letters, numbers & symbols.  
3. Send TXT Msg: To begin a TXT message to the contact.  
4. Send PIX/FLIX Msg: To create a PIX/FLIX message.  
5. Call: To call the contact.  
3.1 To save the entry, press  
[SAVE].  
3
3.2 To return to the previous page, press  
.
To call the selected number, press  
and then select “Call” or press  
[OPTIONS]  
5
For each new contact, at least 1 phone number or email  
.
address needs to be saved with the contact. “PLEASE INSERT  
AT LEAST ONE PHONE NUMBER OR E-MAIL” will be  
displayed if neither have been added.  
Even though entry name is left empty while the phone number  
is provided, the entry will be saved and displayed with phone  
number.  
40  
41  
CONTACTS  
CONTACTS  
CHANGE GROUP NAME  
GROUPS  
Groups allows you to classify phone entries into groups with up to 10  
numbers in each group. The existing groups include Family and Work  
and they cannot be erased or renamed. You can add up to 28 more  
groups which can be changed or erased.  
Press  
[MENU], press  
“Groups”.  
1
2
Select an existing group name that you have  
added with the Navigation Key.  
ADD NEW GROUP  
To select “Rename”, press  
Input a new group name.  
[OPTIONS].  
3
4
Press  
[MENU] and then press  
“Groups”.  
1
2
3
4
To select “New”, press  
Input a new group name.  
[NEW].  
To save it, press  
[SAVE].  
5
C
H
C
H
To save it, press  
[SAVE].  
4
4
SEND TXT MSG. TO A GROUP  
ASSIGN PHONE NUMBER TO GROUP  
Press  
[MENU], press  
“Groups”.  
1
2
To assign phone numbers to a Group,  
1
Select an existing group name with the  
Navigation Key.  
select “Add”, press  
[OPTIONS].  
Select a location and then press  
Your phone book entries will be displayed in  
alphabetical order.  
.
2
3
To select “Send TXT Msg.”, press  
[OPTIONS].  
3
4
Input a “Message”, press  
[OPTIONS] to  
select “Add”, “Save As Draft”, “Priority Level”  
and “Call Back #”.  
Select the contact for the group and then  
press  
[DONE]. “CONTACT ADDED TO  
GROUP (NAME)” will be displayed.  
Repeat for each location for the Group.  
5.1. To send the text message, press  
5.2. To save the text message, press  
[SEND].  
[OPTIONS]  
5
and then select “Save As Draft” and then  
press  
.
42  
43  
CONTACTS  
CONTACTS  
SEND PIX/FLIX MSG. GROUP  
SPEED DIALS  
In idle mode, calls can be placed to numbers stored in speed dial by  
pressing & holding the location number on the key pad. For a 2-digit  
location number, press the first number and then press and hold the  
second number.  
Press  
[MENU], press  
“Groups”.  
1
2
Select an existing group name with the  
Navigation Key.  
1
2
Press  
[MENU], press  
“Speed Dials”.  
To select “Send PIX/FLIX Msg”,  
press  
3
4
To assign a phone number to a location, select  
the location and then press [SET].  
[OPTIONS].  
Input a “Text”, “PIX or FLIX”, “Sound”, “Subject”,  
and then press [OPTIONS] to select  
“Preview”, “Add Quick Text”, “Save As Draft”,  
“Priority Level”, “Remove Picture”, “Remove  
Sound”, “Add Slide”.  
Select the contact with the Navigation Key and  
3
then press  
. To confirm, press  
.
C
H
C
H
4
4
“Unassigned” appears if the location is available.  
To call an assigned number, press & hold the last digit of the  
speed dial #.  
5.1. To send the PIX message, press  
5.2. To save the PIX message, press  
[SEND].  
[OPTIONS]  
5
and then select “Save As Draft” and then  
“Speed dial set” will be displayed.  
press  
.
4
ERASE GROUP  
Press  
[MENU], press  
“Groups”.  
1
Select an existing group name with the  
Navigation Key.  
2
To select “Erase”, press  
[OPTIONS].  
3
4
Select “Yes” to erase it, press  
.
44  
45  
RECENT CALLS  
RECENT CALLS  
MISSED  
RECEIVED  
Displays information about the 20 most recently answered calls.  
Place a call to a received call by simply pressing  
Displays information about the 20 most recently missed calls.  
Place a call to a missed call number by simply pressing  
.
.
To see a list of the 20 most recently answered  
1
To see a list of the 20 most recently missed  
1
calls, press  
[MENU] and then select “Recent  
“Received”. If the  
calls, press  
[MENU] and then select  
“Missed”.  
Calls” menu, press  
“Recent Calls” menu, press  
number is already stored in your phone book,  
only the name appears. If the number is not  
stored, only the phone number appears.  
If the number is already stored in your phone  
book, only the name appears. If the number is  
not stored, only the phone number appears.  
To view missed call details, press  
[OPEN].  
2
3
To view incoming call details, press  
[OPEN].  
2
3
Call details include date, time and phone number.  
C
H
C
H
Call details include date, time and phone number.  
4
4
Press  
[OPTIONS] and then select “Save”  
Press  
[OPTIONS] and then select “Save”  
to save it or select “Erase” to delete it.  
to save it or select “Erase” to delete it.  
l
l
l
l
l
l
Save : To store the phone number in your phone book.  
Erase : To erase a missed calls listing.  
Details : To view the caller’s information.  
Lock/Unlock : To lock or unlock a missed calls listing.  
Erase All : To erase all missed calls listings.  
View Timers : To display usage time.  
l
l
l
l
l
l
Details : To view the caller’s information.  
Save : To store the phone number in your phone book.  
Erase : To erase a received calls listing.  
Lock/Unlock : To lock or unlock received calls listing.  
Erase All : To erase all received calls listings.  
View Timers : To display usage time.  
After 20 missed calls, the oldest call will automatically  
be erased from the history.  
After 20 received calls, the oldest call will automatically  
be erased from the history.  
Press  
[MESSAGE], to send the TXT or PIX/FLIX message.  
Press  
[MESSAGE], to send the TXT or PIX/FLIX message.  
“Details” menu appears only stored phone numbers.  
“Details” menu appears only stored phone numbers.  
46  
47  
RECENT CALLS  
RECENT CALLS  
DIALED  
ALL  
Displays information about the most recent incoming, outgoing and  
missed calls.  
Displays information about the 20 most recently dialed numbers.  
Place a call to a dialed call by simply pressing  
.
To see a list of the 60 most recent incoming,  
To see a list of the 20 most recently dialed  
1
1
outgoing and missed calls, press  
[MENU] and  
“All”.  
numbers, press  
[MENU] and then select  
“Dialed”.  
then select “Recent Calls” menu, press  
“Recent Calls” menu, press  
If the number is already stored in your phone book,  
only the name appears. If the number is not stored,  
only the phone number appears.  
If the number is already stored in your phone  
book, only the name appears. If the number is  
not stored, only the phone number appears.  
To view dialed call details, press  
[OPEN].  
2
3
2
3
To view details, press  
[OPEN].  
C
H
C
H
Call details include type of call, date, time and phone number.  
Call details include type of call, date, time and phone number.  
4
4
Press  
[OPTIONS] and then select “Save”  
Press  
[OPTIONS] and then select “Save”  
to save it or select “Erase” to delete it.  
to save it or select “Erase” to delete it.  
l
l
l
l
l
l
Save : To store the phone number in your phone book.  
Details : To view the caller’s information.  
Erase : To erase a recent calls listing.  
Lock/Unlock : To lock or unlock recent calls listing.  
Erase All : To erase all recent calls listings.  
View Timers : To display usage time.  
l
l
l
l
l
l
Save : To store the phone number in your phone book.  
Details : To view the caller’s information.  
Erase : To erase a dialed calls listing.  
Lock/Unlock : To lock or unlock dialed calls listing.  
Erase All : To erase all dialed calls listings.  
View Timers : To display usage time.  
After the 20 received, dialed or missed calls, the oldest  
call will automatically be erased from the history.  
After 20 dialed calls, the oldest call will automatically  
be erased from the history.  
Press  
[MESSAGE], to send the TXT or PIX/FLIX message.  
Press  
[MESSAGE], to send the TXT or PIX/FLIX message.  
“Details” menu appears only stored phone numbers.  
“Details” menu appears only stored phone numbers.  
48  
49  
RECENT CALLS  
SETTINGS  
Customizes your phone and optimizes performance through a variety  
of settings.  
VIEW TIMERS  
Checks the usage time and manages your calls within the limit you  
set. The 11 timers include (Last Call, All Calls, Received Calls,  
Dialed Calls, Roaming, Transmit Kilobytes, Received Kilobytes,  
Total Kilobytes, Last Reset, Lifetime Calls, Lifetime Data Counter):  
SOUNDS  
MASTER VOLUME  
Controls the Ringer volume and alerts you to incoming calls in the  
modes listed in the gray box below.  
Press  
press  
[MENU], select “Recent Calls” menu,  
“View Timers”.  
1
2
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Sounds” and then  
select “Master Volume”.  
1
2
To reset the timers except “Last Reset”, “Lifetime  
Calls” or “Lifetime Data Counter”,  
press  
press  
To reset all timer, press  
then select “Yes”, press  
[RESET] and then select “Yes”,  
.
Select one of the following options by pressing  
the Navigation Key to the right.  
[RESET ALL],  
.
C
H
C
H
Low, Med Low, Med, Med High, High.  
Vibrate Only  
Alarm Only  
4
4
To return to the previous page, press  
.
3
All Sound Off  
Press  
to play sound.  
Select one of the available ring types.  
3
To confirm, press  
.
50  
51  
SETTINGS  
SETTINGS  
CALL SOUNDS  
ALERT SOUNDS  
To select a ringer type for incoming calls:  
When selected, this setting alerts you to the following handset changes:  
CALL RINGTONE  
TXT MESSAGE  
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
1
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Sounds” and then select  
“Alert Sounds”, press “TXT Message”.  
1
“Sounds” and then select  
“Call Ringtone”.  
“Call Sounds”, press  
2
Select your desired ringer type.  
2
Select “Tone”, “Vibrate” or “Reminder” with the  
Navigation Key and then select one of the  
following options by pressing the Navigation Key.  
Up or Down key : Select “Ringer”.  
Press  
Play/Pause to the ringer.  
Tone : 1. Get New or select your desired ringer type.  
Vibrate : Select “On” or “Off”.  
Select one of the available ring types.  
3
C
H
C
H
Reminder : Select “Once”, “Every 2 Minutes”,  
To confirm, press  
.
“Every 15 Minutes” or “Off”.  
4
4
To save, press  
.
3
CALL VIBRATE  
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
1
PIX MESSAGE  
“Sounds” and then select  
“Call Vibrate”.  
“Call Sounds”, press  
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
1
“Sounds” and then select  
“PIX Message”.  
2
Select “On” or “Off” with the Navigation Key and  
then press  
“Alert Sounds”, press  
to save it.  
2
3
Select “Tone”, “Vibrate” or “Reminder” with the  
Navigation Key and then select one of the  
following options by pressing the Navigation Key.  
Tone : 1. Get New or select your desired ringer type.  
Vibrate : Select “On” or “Off”.  
Reminder : Select “Once”, “Every 2 Minutes”,  
“Every 15 Minutes” or “Off”.  
To save, press  
.
52  
53  
SETTINGS  
SETTINGS  
VOICEMAIL MSG  
KEYPAD VOLUME  
To adjust key pad tone:  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Sounds” and then select  
“Alert Sounds”, press “Voicemail Msg”.  
1
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Sounds” and then  
select “Keypad Volume”.  
1
2
2
Select “Tone”, “Vibrate” or “Reminder” with the  
Navigation Key and then select one of the  
following options by pressing the Navigation Key.  
Select one of the following options by pressing  
the Navigation Key to the right.  
Tone : 1. Get New or select your desired ringer type.  
Low, Med Low, Med, Med High, High  
Off  
Vibrate : Select “On” or “Off”.  
Reminder : Select “Once”, “Every 2 Minutes”,  
“Every 15 Minutes” or “Off”.  
Select one of the available ring types.  
3
To confirm, press  
.
C
H
C
H
To save, press  
.
3
4
4
EARPIECE VOLUME  
To adjust earpiece volume:  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Sounds” and then  
select “Earpiece Volume”.  
1
2
Select one of the following options by pressing  
the Navigation Key to the right.  
Low, Med Low, Med, Med High, High  
Select one of the available ring types.  
3
To confirm, press  
.
54  
55  
SETTINGS  
SETTINGS  
SERVICE ALERTS  
POWER ON/OFF SOUNDS  
ERI (Enhanced Roaming Indicator)  
POWER ON SOUND  
The Enhanced Roaming Indicator (ERI) feature displays a text banner  
on the display screen informing the handset user of which systems the  
wireless device is using as compared to the service plan they  
purchased. The ERI Banner text changes to tell a customer if they are  
using the: “Verizon Network”, “Extended Network” or “Roaming”.  
Using a Personal Message Banner may prevent the ERI from displaying  
on the phone.  
Allows you to activate/deactivate the power on tones.  
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
1
“Sounds” and then select  
“Power  
“Power On/Off Sounds”, press  
On Sound”.  
Press  
Tools” menu, press  
select  
[MENU] and then select “Settings &  
1
2
Select “On” or “Off” with the Navigation Key and  
then press to save it.  
“Sounds” and then  
“ERI”.  
“Service Alerts”, press  
2
Select “On” or “Off” with the Navigation Key and  
then press to save it.  
POWER OFF SOUND  
Allows you to activate/deactivate the power off tones.  
C
H
C
H
4
4
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
1
Display -> Banner -> ERI Banner must be set for “ON” for  
smooth operation of all the functions.  
“Sounds” and then  
select  
“Power On/Off Sounds”, press  
“Power Off Sound”.  
MINUTE BEEP  
Sounds an alert every minute during a call.  
2
Select “On” or “Off” with the Navigation Key and  
then press  
to save it.  
Press  
[MENU] and then select “Settings &  
1
2
Tools” menu, press  
“Sounds” and then select  
“Minute Beep”.  
“Service Alerts”, press  
Select “On” or “Off” with the Navigation Key and  
then press to save it.  
CALL CONNECT  
Notifies you that a call has been successfully placed.  
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
1
2
“Sounds” and then select  
“Call Connect”.  
“Service Alerts”, press  
Select “On” or “Off” with the Navigation Key and  
then press  
to save it.  
56  
57  
SETTINGS  
SETTINGS  
ALARM SOUNDS  
DISPLAY  
Allows you to customize the display.  
To select a ringer type for alarm sound:  
ALARM TONE  
BANNER  
You can choose to display a personal Banner greeting or the  
Enhanced Roaming Indicator (ERI) banner on the phone’s screens:  
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
1
“Sounds” and then select  
“Alarm Sounds”, press  
“Alarm Tone”.  
PERSONAL  
The text greeting can be up to 16 characters and is displayed on  
your phone’s screen in standby mode.  
2
Select your desired ringer type.  
Up or Down key : 1. Get New or select your desired ringer type.  
Press to play/pause the ringer  
Press  
Tools” menu, press  
“Banner”, press  
[MENU] and then select “Settings &  
1
“Display” and then select  
“Personal”.  
Select one of the available ring types.  
3
C
H
C
H
2
Enter a new personal greeting.  
To change the input mode, press  
To return to the previous page, press  
[CANCEL].  
To confirm, press  
.
[Abc].  
4
4
ALARM VIBRATE  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Sounds” and then select  
“Alarm Sounds”, press “Alarm Vibrate”.  
1
Press  
to save it.  
3
ERI BANNER  
2
Select “On” or “Off” with the Navigation Key and  
then press  
to save it.  
Press  
[MENU] and then select “Settings &  
1
Tools” menu, press  
“Banner”, press  
“Display” and then select  
“ERI Banner”.  
2
Select “On” or “Off” with the Navigation Key and  
then press  
to save it.  
58  
59  
SETTINGS  
SETTINGS  
BACKLIGHT  
CONTRAST  
Backlights the display and key pad and activates dimming for easy  
viewing in dark places.  
To adjust the display contrast:  
Press  
Tools” menu, press  
“Contrast”.  
[MENU] and then select “Settings &  
1
2
LCD  
“Display” and then select  
Press  
Tools” menu, press  
“Backlight”, press  
[MENU] and then select “Settings &  
1
2
“Display” and then select  
“LCD”.  
Select one of the following options with the  
Navigation Key.  
Select one of the following options with the  
Navigation Key.  
Level 1 ~ Level 5  
5 Seconds, 15 Seconds, 30 Seconds, Always On, Always Off.  
Press  
to save it.  
3
C
H
C
H
Press  
to save it.  
3
WALLPAPER  
4
4
KEYPAD  
Press  
Tools” menu, press  
“Wallpaper”.  
[MENU] and then select “Settings &  
1
“Display” and then select  
Press  
[MENU] and then select “Settings &  
1
Tools” menu, press  
“Backlight”, press  
“Display” and then select  
“Keypad”.  
2
3
Select “My PIX” or “My FLIX” with the  
Navigation Key.  
2
Select one of the following options with the  
Navigation Key.  
Select Default to choose a pre-installed display,  
Downloads, PIX # or FLIX # to choose a display  
you have downloaded to your phone.  
5 Seconds, 15 Seconds, 30 Seconds, Always On, Always Off.  
To launch “Get It Now”, press  
To expand selected image, press  
[GET NEW].  
[VIEW].  
Press  
to save it.  
3
4
Select a display from the Animation and the  
Graphic list using the Navigation Key and then  
press  
to save it.  
60  
61  
SETTINGS  
SETTINGS  
SCREENSAVER  
FONTS  
Press  
Tools” menu, press  
select “Fonts”.  
[MENU] and then select “Settings &  
Press  
Tools” menu, press  
select  
[MENU] and then select “Settings &  
“Display” and then  
“Screensaver”.  
1
1
“Display” and then  
2
Select “Normal” or “Large” with the Navigation  
Key and then press to save it.  
2
3
Select “My PIX” or “My FLIX” with the  
Navigation Key.  
POWER ON/OFF ANIMATIONS  
Select Default to choose a pre-installed display,  
Downloads, PIX # or FLIX # to choose a display  
you have downloaded to your phone.  
POWER ON  
Allows you to change the power on animation.  
To launch “Get It Now”, press  
To expand selected image, press  
[GET NEW].  
[VIEW].  
Press  
Tools” menu, press  
select  
“Power On”.  
[MENU] and then select “Settings &  
“Display” and then  
“Power On/Off Animations”, press  
1
2
C
H
C
H
4
Select a display from the Animation and the  
Graphic list using the Navigation Key and then  
4
4
press  
to save it.  
Select one of the following options with the  
Navigation Key.  
Animation 1  
Animation 2  
DISPLAY THEMES  
Press  
[MENU] and then select “Settings &  
1
2
Press  
to save it.  
3
Tools” menu, press  
“Display Themes”.  
“Display” and then select  
POWER OFF  
Allows you to change the power off animation.  
Select one of the following options with the  
Navigation Key.  
Press  
menu, press  
“Power On/Off Animations”, press  
[MENU] and then select “Settings & Tools”  
1
2
Theme 1  
Theme 2  
Theme 3  
Theme 4  
“Display” and then select  
“Power Off”.  
Select one of the following options with the  
Navigation Key.  
Animation 1  
Animation 2  
Press  
to save it.  
3
Press  
to save it.  
3
62  
63  
SETTINGS  
SETTINGS  
NAM SELECTION  
SYSTEM  
Enables Auto NAM (Number Assignment Modules) or manually  
selects a NAM.  
STANDALONE MODE  
AUTO NAM  
The device shall provide the ability for the user to turn off all radios in  
order to utilize the native or downloaded capability within the device  
when in areas where radio transmission is restricted.  
Automatically switches phone to proper NAM when you have multiple  
NAM registrations.  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “System” and then  
select “Standalone Mode”.  
1
Press  
[MENU] and then select “Settings &  
Tools” menu, press “System” and then select  
“NAM Selection”, press “Auto NAM”.  
1
2
2
Select “On” or “Off” with the Navigation Key and  
then press to save it.  
Select “On” or “Off” with the Navigation Key and  
then press to save it.  
C
H
C
H
SYSTEM SELECT  
CHANGE NAM  
Changes the NAM used by the phone when you have multiple  
registrations.  
4
4
Selects the Preferred System.  
Press  
Tools” menu, press  
select  
[MENU] and then select “Settings &  
“System” and then  
“System Select”.  
1
2
Press  
[MENU] and then select “Settings &  
Tools” menu, press “System” and then select  
“NAM Selection”, press “Change NAM”.  
1
Select one of the following options with the  
Navigation Key.  
2
Select one of the following options with the  
Navigation Key.  
Automatic B  
Automatic A  
Home Only  
NAM 1 - VERIZON  
NAM 2 - VERIZON  
Press  
to save it.  
3
Press  
to save it.  
3
64  
65  
SETTINGS  
SETTINGS  
DEVICE INFO  
LOCATION  
Displays the information of your phone:  
To determine whether or not the network system can detect your  
position:  
MY NUMBER  
Displays your phone number.  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “System” and then  
select “Location”.  
1
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
1
“System” and then select  
“My Number”.  
“Device Info”, press  
2
Select one of the following options with the  
Navigation Key.  
2
3
You will see the MDN/MIN number and  
provider name.  
Location On  
E911 Only  
To return to the previous page, press  
.
C
H
C
H
Press  
to save it.  
3
SW VERSION  
Displays the (Software/PRL/ERI/Browser/Get It Now) version.  
4
4
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
1
“System” and then select  
“SW Version”.  
“Device Info”, press  
2
3
You are to see the version of software,  
hardware and others.  
To return to the previous page, press  
.
ICON GLOSSARY  
Displays the Indicator Icons of your cellular telephone.  
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
1
“System” and then select  
“Icon Glossary”.  
“Device Info”, press  
2
3
You should see a list of the Indicator Icons of  
your cellular telephone with a short label or  
description.  
To return to the previous page, press  
.
66  
67  
SETTINGS  
SETTINGS  
SECURITY  
EDIT CODE  
Changes your Device/Location 4-digit password.  
Prevents unauthorized use of your phone. The following settings can  
be restricted:  
Press  
[MENU] and then select “Settings &  
1
COMMON CODE  
Tools” menu, press  
“System” and then select  
“Security” and then enter your password,  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “System” and then  
select “Security” and then enter your  
password, press  
1
press  
.
The default password is the last 4 digits of your phone number.  
.
The default password is the last 4 digits of your phone number.  
2
3
Select  
“Edit Code”.  
Select “Device” or “Location” and then select one  
of the following options with the Navigation Key.  
2
3
Select  
“Common Code”.  
C
H
C
H
Select “On” or “Off” with the Navigation Key and  
then press to save it.  
Enter a “New Code” then press  
.
4
5
4
4
Enter a “Confirm Code” then press  
to save it.  
LOCK MODE  
Prevents the phone from being used without entering the password first.  
FORMAT CARD  
Changes your Device/Location 4-digit password.  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “System” and then  
select “Security” and then enter your  
password, press  
1
Press  
[MENU] and then select “Settings &  
Tools” menu, press “System” and then  
select “Security” and then enter your  
password, press  
1
.
The default password is the last 4 digits of your phone number.  
.
The default password is the last 4 digits of your phone number.  
2
3
Select  
“Lock Mode”.  
2
3
Select  
“Format Card”.  
Select “Device” or “Location” and then select one  
of the following options with the Navigation Key.  
You will see the message “All data in card  
will be lost. Continue?”.  
Device : Lock, Unlock, On Power Up  
Location : Lock, Unlock  
Select “Yes” or “No” with the Navigation Key  
4
Press  
to save it.  
4
and then press  
to save it.  
68  
69  
SETTINGS  
SETTINGS  
LANGUAGE  
CALL SETTINGS  
Selects the language in which letters are displayed on the screen.  
ANSWER OPTIONS  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “System” and then  
select “Language”.  
1
To select an answer mode:  
Press  
Tools” menu, press  
select  
[MENU] and then select “Settings &  
1
2
“Call Settings” and then  
2
3
Select “English” or “Spanish” with the  
Navigation Key.  
“Answer Options”.  
Select one of the following with the Navigation Key.  
Press  
to save it.  
Flip Open  
Any Key  
Send Only  
SHORT CUT KEY  
C
H
C
H
Auto Answer – Handsfree  
Auto Answer – Headset  
Auto Answer – Handset  
Your phone offers you the option of assigning a short-cut key  
(Down Navigation Key) to a favorite or often-used function.  
To assign a shortcut to the key:  
4
4
Press  
[MENU] and then select “Settings &  
Tools” menu, press “System” and then  
select “Short Cut Key”.  
1
2
To save, press  
.
3
Select your desired menu option and then  
press  
.
Calendar/Tunes & Tones/Gallery/Fun & Games/News & Info/  
Inbox/Sent/Email/Chat/IM/Settings & Tools/Alarm Clock/  
Calculator  
The Shortcut can now be accessed by pressing  
the “Down Navigation Key”.  
3
70  
71  
SETTINGS  
SETTINGS  
AUTO RETRY  
ONE TOUCH DIAL  
Automatically redials a call up to 5 times after a set time interval.  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Call Settings” and then  
select “One Touch Dial”.  
1
2
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Call Settings” and then  
select “Auto Retry”.  
1
2
Select “On” or “Off” with the Navigation Key and  
then press to save it.  
Retry time field is shown. Press the Navigation  
Key left or right to choose the amount of time.  
(Off, 3 Seconds, 5 Seconds, 7 Seconds or  
10 Seconds)  
VOICE PRIVACY  
Enhances voice privacy and avoids tapping during a call.  
When a time is chosen for retry time, the repeat  
field is shown. Press the Navigation Key down to  
highlight the repeat field. Press the Navigation  
Key left or right to choose the number of  
repeats. (1 Time, 3 Times or 5 Times).  
3
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Call Settings” and then  
select “Voice Privacy”.  
1
2
C
H
C
H
4
4
Select “On” or “Off” with the Navigation Key and  
then press to save it.  
To save, press  
.
4
On : Makes it more difficult to wire tap.  
TTY MODE  
l
Your phone is able to operate with a TTY (Teletypewriter) device in  
both analog and digital modes. This feature is system dependent and  
may not be available in all areas.  
DATA SETTING  
Choose the connection mode for the usage of your phone.  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Call Settings” and then  
select “TTY Mode”.  
1
2
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Call Settings” and then  
select “Data Setting”.  
1
2
Select one of the following with the Navigation Key.  
Select one of the following connection modes  
with the Navigation Key.  
TTY Off  
l
l
l
l
TTY+ TALK  
TTY + HEAR  
TTY Full  
Voice Call : To receive a voice call.  
Data Only : To receive data when connected to PC.  
l
l
To save, press  
.
3
To save, press  
.
3
72  
73  
SETTINGS  
SETTINGS  
VOICE SERVICES  
VOICE DIAL  
Voice Dial allows you to call a person by simply saying their name.  
To access Voice Dial:  
VOICE SETTING  
Select Set Active to activate voice-dial.  
If the handset is connected to HFK, select HFK to activate  
voice-dial by simply saying “Wake up”.  
Press  
[MENU], select “Settings & Tools”  
menu, press “Call Settings”, select  
“Voice Services”, and press “Voice Setting”.  
1
Press  
press  
Services”, and press  
[MENU], select “Settings & Tools” menu,  
“Call Settings”, select “Voice  
“Voice Dial”.  
1
2
2
Under “Set Active”, select “Off”, “Active Flip”  
or “Send Key”.  
2.1. Press  
displayed alphabetically. Select a name and  
then press . Instructions (Press OK and  
[NEW]. The phone book list will be  
Send Key : Voice Dialing can be activated by pressing and  
l
holding  
in idle mode.  
say name) will be displayed and press  
You will hear “Name Please”.  
.
Active Flip : Voice Dialing can be activated after the flip opens.  
Off : Voice Dialing canceled.  
l
l
C
H
C
H
2.2. Say the name for the voice tag and repeat the  
name when prompted. You will hear “Added”.  
4
4
3
4
Under “HFK Mode”, select an option  
“On” or “Off”.  
3
To play a voice dial:  
Highlight the voice tag you want to play and and  
then press  
[PLAY].  
To save, press  
.
To review a voice dial: Highlight the voice tag you  
4
5
When SEND key is set to be the activation key  
want to review, and press  
select “Detail”.  
[OPTIONS] and then  
1.Press and hold  
until your phone turns to Voice Recognition  
mode.  
2.Say the indicator, such as a person's name you saved for the  
number you are calling.  
To re-record a voice dial: Highlight the voice tag  
you want to re-record and press  
and then select “Re-record”.  
[OPTIONS]  
To hear a voice dial from speaker: Highlight the  
6
7
voice tag you want to hear and press  
and then select “Play Speaker”.  
[OPTIONS]  
To erase or erase all voice dials: Highlight the  
voice tag you want to erase or erase all and  
press  
[OPTIONS] and then select “Erase” or  
“Erase All” to erase all voice tags.  
74  
75  
SETTINGS  
SETTINGS  
TRAIN WORDS  
DTMF TONES  
Train allows you to use Control words to make a call without using  
the keypad. Use to train or untrain Voice Recognition with the control  
words, “Yes”, “No” or “Wake-Up”.  
To adjust tone length:  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Call Settings” and then  
select “DTMF Tones”.  
1
2
Press  
press  
Services”, and press  
[MENU], select “Settings & Tools” menu,  
“Call Settings”, select “Voice  
“Train Words”.  
1
2
Select one of the following with the Navigation Key.  
Select one of the control words - “Yes”, “No” or  
“Wake-Up”. “Please begin recording after the  
prompt tone” will be displayed and you will hear  
“Now training control words. Please say the word”.  
Say the word. You will hear “Again”. Say the word  
again. You will hear “Training word successful”.  
To undo voice recognition, select a word you want  
Normal  
Long  
Off  
l
l
l
To save, press  
.
3
C
H
C
H
to undo then press  
[UNDO].  
4
4
3
Under “Undo Train All”.  
“Undo voice recognition for all procedures?”  
will be displayed. Press  
words.  
to undo all trained  
76  
77  
SETTINGS  
SETTINGS  
CLOCK FORMAT  
RINGER ID  
MAIN CLOCK  
1
2
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
“Ringer ID”.  
To change the main clock’s appearance on the standby screen:  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Clock Format” and then  
select “Main Clock”.  
1
2
Select “On” or “Off” with the Navigation Key  
and then press to save it.  
(Default setting is “Off”)  
Select one of the following with the Navigation Key.  
PICTURE ID  
Digital  
Analog  
Off  
l
l
l
1
2
Press  
Tools” menu, press  
[MENU] and then select “Settings &  
“Picture ID”.  
C
H
C
H
To save, press  
.
3
4
4
Select “On” or “Off” with the Navigation Key  
and then press to save it.  
(Default setting is “Off”)  
FRONT CLOCK  
To change the front clock’s appearance on the standby screen:  
Press  
[MENU] and then select “Settings &  
Tools” menu, press “Clock Format” and then  
select “Front Clock”.  
1
2
Select one of the following with the Navigation Key.  
Digital  
Analog  
Off  
l
l
l
To save, press  
.
3
78  
79  
TOOLS  
TOOLS  
BY COUNT  
CALENDAR  
Use the keypad to enter an account.  
Sets an event and reminds you of that event.  
ADD NEW  
END DATE  
Use the keypad to change or enter the end date.  
Press  
Tools” menu, press  
“Calendar”.  
[MENU] and then select “Settings &  
1
2
TIME ZONE  
Use the Navigation Key to select a time zone,  
“Tools” and then select  
press  
[SET]. (OFF, EST, EDT, CST, CDT,  
Move the Navigation Key left, right, up or down to  
choose a date in the calendar and then press  
[OK]. Press  
Date, 3. Erase Passed or 4. Erase All.  
Press [MONTHLY/WEEKLY] to exchange  
MST, MDT, PST, PDT, AKST, AKDT, HAST,  
HADT or GMT/UTC).  
[OPTIONS] to 1. New, 2. Go To  
ALERT  
Use the keypad to 1. Get New or select the alert  
tone you wish to set.  
display mode.  
C
H
C
H
VIBRATE  
To set a new event, press  
[OPTIONS] then  
3
4
4
select “New”. The appointment field is highlighted.  
Press the Navigation Key down to set the alarm  
options.  
Use the Navigation Key to select vibrate On/Off.  
REMINDER  
Use the Navigation Key to select an alert time  
interval option (0 Minute, 5 Minutes, 10 Minutes,  
15 Minutes).  
APPOINTMENT  
Use the keypad to enter an appointment in your  
schedule.  
Press  
to the calendar.  
[SAVE] to save it or  
[CLR] to return  
4
5
START TIME  
Use the keypad to set a start time and  
select “am” or “pm”.  
to  
The date of the event will be marked on your  
calendar.  
END TIME  
Use the keypad to set an end time and  
select “am” or “pm”.  
to  
VIEW PLAN LIST  
START DATE  
Use the keypad to change or enter the start date.  
To view the Calendar List:  
1
2
Move the Navigation Key to choose an event and  
then press , press [VIEW].  
RECURRENCE  
Use the Navigation Key to select a repeat setting for  
the the calendar. (Daily, Weekly, Monthly or Yearly).  
Press  
press  
[ERASE] and then select “Yes”,  
.
80  
81  
TOOLS  
TOOLS  
ALARM CLOCK  
WORLD CLOCK  
To display the time and date in pre-programmed cities:  
1
2
Press  
Tools” menu, press  
“Alarm Clock”.  
[MENU] and then select “Settings &  
1
Press  
Tools” menu, press  
“World Clock”.  
[MENU] and then select “Settings &  
“Tools” and then select  
“Tools” and then select  
Select one of the entries using the Navigation Key.  
To set a new alarm, choose alarm 1, 2 or 3.  
To edit an existing alarm, select that alarm.  
Press  
Press  
Select a city by pressing the  
Or use the Navigation Key to select another city.  
[CITIES].  
2
3
.
[OPTIONS] to 1. On/Off, 2. Reset,  
The world map appears with the city, its date  
and time.  
3. Reset All.  
Use the Navigation Key to select another city.  
The setting field will be highlighted. Press the  
Navigation Key down to select alarm options.  
3
C
H
C
H
Pressing  
Time on or off.  
[DST], turns all cities supporting Daylight Savings  
4
4
ALARM  
Use the Navigation Key to select alarm on/off.  
To return to the previous page, press  
.
4
TIME  
Use the keypad to set a time for the alarm and  
to select “am” or “pm”.  
FREQUENCY  
Use the Navigation Key to select a setting for the  
alarm (Once, Daily, Mon - Fri, Weekends).  
RINGER  
Use the keypad to 1. Get New or select the alert  
tone you wish to set.  
To save an alarm setting press  
[SAVE].  
4
82  
83  
TOOLS  
TOOLS  
NOTEPAD  
CALCULATOR  
Your phone includes an internal notepad that can be used to  
compose and store reminders and notes.  
To access the calculator:  
1
2
Press  
Tools” menu, press  
“Calculator”.  
[MENU] and then select “Settings &  
ADD MEMO  
“Tools” and then select  
To compose a memo (there is an 80-letter limit):  
Press  
Tools” menu, press  
“Notepad”.  
[MENU] and then select “Settings &  
1
2
Follow the instructions below to calculate  
8*6Ö4-2.5= 9.50  
“Tools” and then select  
Input 8.  
To add a new memo, press  
Input a new text memo.  
(Please refer to page 33 for more details on entering  
letters, numbers & symbols.)  
[NEW].  
Move the Navigation Key rightward.  
Input 6 and then press the Navigation Key.  
Move it leftward.  
Input 4 and then press the Navigation Key.  
Move it downward.  
C
H
C
H
Input 2 and then press the  
Press 5.  
to input (.).  
To save memo, press  
[SAVE].  
3
4
4
Then press  
and you will see the answer.  
VIEW MEMO  
: X,  
: -,  
: /,  
: +,  
: .,  
: Clear,  
: =.  
To view a saved memo:  
Press  
Tools” menu, press  
“Notepad”.  
[MENU] and then select “Settings &  
1
To reset, press  
[CLEAR].  
3
“Tools” and then select  
To change the displayed number from positive (+) to negative (-)  
and vice versa, press [
ע
].  
The list of all memos, in saved order, is displayed.  
2
3
Select a memo and then press  
[VIEW].  
Press  
[OPERATOR] to use parenthesis and “^”.  
The selected memo will appear.  
To edit it, press  
memo and then press  
[EDIT] and input a new text  
[SAVE] to save it.  
4
4.1. To add a new memo, press  
[NEW].  
4.2. To erase a memo, press  
“Erase”.  
[OPTIONS]  
4.3. To erase all memos, press  
[OPTIONS]  
“Erase All”.  
84  
85  
TOOLS  
STOP WATCH  
Simultaneously times up to six different events. To operate the  
stop watch:  
1
2
Press  
Tools” menu, press  
“Stop Watch”.  
[MENU] and then select “Settings &  
“Tools” and then select  
Chapter 5  
To measure a time period:  
1. To start the stop watch, press  
[START].  
2. To pause it, press  
3. To resume it, press  
To reset it, press  
[STOP].  
[START].  
[RESET].  
GET IT NOW  
C
H
To time up to six events at once:  
3
1. To start, press  
[START].  
4
2. To stop a time period and continue  
measuring another one, press  
[CONT].  
3. To stop the second and continue measuring  
Your phone provides a unique feature -Get It Now- that enables you  
to download ringtones, wallpapers, games and more from your  
network to your phone. Please contact your service provider for the  
availability of these services.  
C
H
a third one, press  
[CONT].  
4. To measure up to six time periods, repeat the  
above steps.  
5
5. To stop the stop watch, press  
6. To review the results, press  
7. To return to the stop watch, press  
8. To reset it, press [RESET].  
[STOP].  
[VIEW].  
[OK].  
GET IT NOW  
86  
87  
GET IT NOW  
GET IT NOW  
GET TUNES & TONES  
To access the Get Tunes & Tones menu, press  
You need to format your memory card before saving files  
to it. Please see page 69 for formatting instructions.  
Highlight the music that you want to purchase.  
5
6
Press  
[BUY] to purchase.  
.
The Confirm Purchase screen will display the  
price and items you selected to purchase.  
GET NEW RINGTONE  
Press  
[BUY] to accept the terms.  
You’lll receive a confirmation that your purchase  
was successful and your music is available for  
7
8
From the Get Tunes & Tones menu, press  
“Get New Ringtones”.  
1
download. Press  
to continue.  
If you have not downloaded any ringtones or  
ringtone applications previously, press  
“Get New App.”. The Get It Now browser will  
launch. From the Download menu, select a  
2
Highlight Phone Memory or Memory Card for  
Storage location (Memory Card is recommended,  
and is only an option if a memory card is in your  
phone). Press  
to begin downloading.  
service provider and press  
application and press  
. Then select the  
to download it.  
Wait for the phone to acquire the content license.  
Press  
Press  
when download is complete.  
To download a ringtone, select the application  
from the Get New Ringtones menu. Once the  
application has launched, follow the directions to  
download your ringtones. Downloaded ringtones  
are saved to the My Ringtones menu.  
3
[PLAY] to play the downloaded song  
9
C
H
C
H
immediately.  
RECORDING NEW TONES  
5
5
From the Get Tunes & Tones menu, press  
“My Sounds”.  
1
GET VCAST MUSIC  
You can use the VCast Music option to download music  
from the VCast music catalog.  
Press  
“Record New”. “Press OK to start  
2
3
recording” will be displayed.  
Press  
to access the Get It Now menu.  
Select Get Tunes and Tones  
Select Get VCast Music  
1
2
Press  
When done, press  
The recording is automatically saved to your  
My Sounds list.  
to begin recording.  
[STOP] to finish recording.  
.
.
3
4
Your recording is saved with a number.  
To rename your recording, scroll to it in the  
My Sounds menu, them press  
4
Browse of Search the catalog to preview the  
songs you want.  
[OPTIONS].  
Then press  
“Rename”.  
88  
89  
GET IT NOW  
GET IT NOW  
MY RINGTONES  
MY MUSIC  
From the Get Tunes & Tones menu, press  
“My Music”.  
1
2
From the Set Tunes & Tones menu, press  
“My Ringtones”.  
1
2
The My Music Menu consists of Get V Cast  
Music and all your saved songs - saved to your  
phone or your Trans-Flash card.  
To play downloaded tunes or tones:  
Select the tunes or tones you want to play and  
then press  
[PLAY].  
To download more music, highlight Get V Cast  
To erase downloaded tunes or tones:  
Select the tunes or tones you want to erase and  
3
4
3
Music and press  
Cast service.  
. You will connect to the V  
then press  
[OPTIONS] and select “Erase” and  
then select “Yes”, press  
.
To play a saved song, scroll through the list of  
tracks and press [PLAY]. Press [MUTE]  
to mute the song. Press [OPTIONS] to  
1. Play All track, 2. Shuffle or 3. Get V Cast Music.  
By pressing  
1. Erase  
[OPTIONS], you can choose from the following:  
2. Ringtone Info  
To assign downloaded tunes or tones:  
Select the tunes or tones you want to assign and  
4
Press  
Press  
to start the song over again.  
to skip to the next song if there are  
5
C
H
C
H
then press  
[SET AS].  
other songs to be played. Press  
play the song.  
to pause or  
5
5
Select “Ringtone”, “Contact ID” or “Alert Tone”  
and then press  
.
By pressing  
1. Ringtone  
2. Contact ID  
[SET AS], you can choose from the following:  
l
3. Alert Tone - 1. All Messages  
2. TXT Message  
3. PIX Msg  
4. Voicemail Msg  
90  
91  
GET IT NOW  
GET IT NOW  
MY SOUNDS  
In Windows Media Player 10, select “V CAST  
Mobile Phone - Removable Storage Card” unless  
no memory card is available. Start the sync  
process in Windows Media Player 10 by pressing  
“Start Sync”. Remember, your phone must be in  
“Sync Music” mode.  
5
From the Get Tunes & Tones menu, press  
“My Sounds”.  
1
2
3
To play downloaded sounds, select the sound  
you want to play, then press  
[PLAY].  
When synching completes, disconnect the cable  
from your phone and exit “Sync Music”.  
6
7
To erase downloaded sounds, select the sound  
you want to erase, then press [OPTIONS].  
Select “Erase” or “Erase All”, then press  
Under the “Get Tunes & Tones” menu, open  
“Manage Music” or “My Music” to view and play  
your music.  
.
By pressing  
1. Erase  
[OPTIONS], you can choose from the following:  
l
2. Erase All  
3. Sound Info  
V CAST Music phones only support music imported from a CD via  
Windows Media™ Player 10, purchased from the V CAST Music  
Service, or other purchased Windows Media™ formatted music.  
iPod and iTunes compatible music files are not compatible with  
V CAST Music.  
To send the PIX message, press  
Please refer to page 106 for more details on  
“New PIX/FLIX Msg”.  
[SEND].  
4
®
®
C
H
C
H
MANAGE MUSIC  
5
5
SYNC MUSIC  
From the Get Tunes & Tones menu, press  
“Manage Music”.  
1
2
Use the USB cable to connect your phone to  
your PC.  
1
2
The Music Library screen will appear. Choose to  
manage by 1. Genre, 2. Artists, 3. Albums, 4.  
Songs, 5. Playlists, 6. Inbox, 7. Play All or 8.  
Shuffle.  
Press  
to access “Get It Now” menu and  
select “Get Tunes & Tones”, then select “Sync  
Music”.  
Open Windows Media™ Player 10 on your PC  
and select the “Sync” tab.  
3
4
Press  
[CATALOG] to launch the browser.  
3
Select “Edit Playlist” and select the songs from  
your library that you want to sync.  
92  
93  
GET IT NOW  
GET IT NOW  
MY PIX  
GET PIX & FLIX  
GET V CAST VIDEO  
In Review Mode you can view all the pictures you have taken, store  
selected images in your phone, send pictures to the Online Album,  
delete images and access additional picture options.  
Press  
menu and then press  
press  
[MENU] and then select “Get It Now”  
“Get PIX & FLIX” or  
and then select “Get V Cast Video”.  
1
Press  
menu and then press  
press and then select  
[MENU] and then select “Get It Now”  
1
“Get PIX & FLIX” or  
“My PIX”.  
Browser launches.  
2
In Review Mode, you can view all the pictures  
you have stored in your phone.  
2
3
GET NEW PIX  
Select the picture with the Navigation Key and  
then press  
[VIEW].  
Press  
[MENU] and then select “Get It Now”  
1
menu and then press  
“Get PIX & FLIX” or  
To view the previous or next picture in detail view, press the  
Navigation Key right or left.  
press  
and then select “Get New PIX”  
then select “Get New App.”. (Get It Now will  
launch and take you to the download menu.)  
By pressing  
DOWNLOADED or TAKEN PIX :  
1. Send: To send a picture message.  
[OPTIONS], you can choose from the following:  
2. To PIX Place: To upload selected picture to PIX server.  
3. Get New: To download picture.  
4. Set As: Assigns the selected PIX to display for specific tasks.  
(Wallpaper/Screen saver/Picture ID/Power On/Power Off.)  
5. Rename: To edit the picture’s title.  
6. Move: To move the selected picture to the other save location.  
7. Lock/Unlock: To select “Lock” or “Unlock”.  
8. Erase: Erase the current picture from your phone.  
9. Erase All: To erase all the pictures in your phone.  
0. PIX Info: Displays information on the selected picture,  
such as “File Name”, “Date”, “Time”, “Resolution”, “Size”.  
C
H
C
H
Use your Navigation Key to select a provider’s  
2
3
browser, press  
.
5
5
Select the desired application from the application  
list and then press to download it.  
The downloaded application will be included in the list displayed  
when you access: Get New PIX > 1. Get New App.  
PRELOADED PIX :  
1. Get New: To download picture.  
After executing the downloaded application,  
download the desired PIX. (The downloaded  
contents are saved in My PIX.)  
4
2. Set As: Assigns the selected PIX to display for specific tasks.  
(Wallpaper/Screen saver/Picture ID/Power On/Power Off.)  
3. Erase All: To erase all the pictures in your phone.  
4. PIX Info: Displays information on the selected picture,  
such as “File Name”, “Date”, “Time”, “Resolution”, “Size”.  
Press  
[CAMERA] to return to Camera mode to take  
another picture.  
94  
95  
GET IT NOW  
GET IT NOW  
MY FLIX  
MY GRAPHICS  
In Review Mode, you can view all the videos you have taken, store  
selected video in your phone, send video to the Online Album, delete  
video and access additional video options.  
In Review Mode you can view all the graphics you have taken, store  
selected images in your phone, send pictures to the Online Album,  
delete images and access additional graphics options.  
Press  
menu and then press  
press and then select  
[MENU] and then select “Get It Now”  
Press  
menu and then press  
press and then select  
[MENU] and then select “Get It Now”  
1
1
“Get PIX & FLIX” or  
“My FLIX”.  
“Get PIX & FLIX” or  
“My Graphics”.  
In Review Mode, you can view all the graphics  
you have stored in your phone.  
2
3
In Review Mode, you can view all the videos you  
have stored in your phone.  
2
3
Select graphic with the Navigation Key and then  
Select the video with the Navigation Key and  
press  
[VIEW]. You can see detail graphic.  
then press  
[PLAY].  
To view the previous or next video in detail view, press the  
Navigation Key right or left.  
In detail view, user can view previous or next graphic by  
pressing left or right Navigation Key.  
By pressing  
DOWNLOADED or TAKEN FLIX :  
1. Send: To send a picture message.  
2. To PIX Place: To upload selected video to flix server.  
3. Get V CAST Video: To download V CAST video.  
4. Set As: Assigns the selected flix to display for specific tasks.  
(Wallpaper/Screen saver/Ringer ID).  
[OPTIONS], you can choose from the following:  
By pressing  
1. Lock/Unlock: To select “Lock” or “Unlock”.  
2. Erase: Erase the current graphic from your phone.  
3. Erase All: To erase all the graphics in your phone.  
4. Graphic Info: Displays information on the selected graphic,  
such as “File Name”, “Date”, “Time”, “Resolution”, “Size”.  
[OPTIONS], you can choose from the following:  
C
H
C
H
5
5
By pressing  
(Wallpaper/Screen saver).  
[SET AS], assigns the selected graphic.  
5. Rename: To edit the video’s title.  
6. Move: To move the selected video to the other save location.  
7. Lock/Unlock: To select “Lock” or “Unlock”.  
8. Erase: Erase the current video from your phone.  
9. Erase All: To erase all the videos in your phone.  
0. FLIX Info: Displays information on the selected video,  
such as “File Name”, “Date”, “Time”, “Resolution”, “Size”.  
The graphic files downloaded with EMS are saved in “My Graphics”.  
Press  
[VIDEO] to return to Camera mode to take  
another video.  
96  
97  
GET IT NOW  
GET IT NOW  
TAKE PIX  
After taking the picture it will be displayed.  
4
To save the picture, press  
[SAVE].  
Press and hold side camera key or press  
.
1
2
To go back to idle mode without saving the  
picture, press  
.
Point the camera lens at your subject. You can  
check the picture framing through the main  
display screen.  
To take another picture without saving the picture  
you just took, press [ERASE].  
To send the picture to someone, press  
Please refer to page 106 for more details on  
“New PIX/FLIX MSG”.  
[SEND].  
Press side camera key or press  
take the picture.  
[TAKE] to  
3
To view captured images, press  
[MY PIX].  
By pressing [OPTIONS], you can choose from the following:  
1. Self Portrait: Take a picture of yourself by checking the view  
on the Sub LCD.  
RECORD FLIX  
2. Resolution: To select a resolution for a picture.  
(480x640/240x320/144x176/120x160)  
3. Self Timer: To activate the camera’s timer function.  
(Off/5 Seconds/10 Seconds)  
4. Flash: To activate the flash function.  
(Off/Auto Flash/Always On/On This Shot)  
Press  
menu and then press  
press  
[MENU] and then select “Get It Now”  
“Get PIX & FLIX” or  
and then select “Record FLIX”.  
1
C
H
C
H
Point the camera lens at your subject. You can  
check the video framing through the main  
display screen.  
5. White Balance: To select white balance.  
(Auto/Sunny/Tungsten/Fluorescent)  
6. File Quality: To select a picture quality.(High/Normal/Economy)  
7. Shutter Sound: To select a shutter sound.  
(Shutter/Say “Cheese”/Ready!123/Silent)  
8. Color Effect: To select color effect among the following:  
(Normal/Gray/Sepia/Negative/Embossing)  
9. Fun Frame: Select your favorite fun picture frame to decorate  
your picture. (Flower/Mask/Sweet Heart/Fist-Punch/Sports/  
Stars/Candle/Event/Roses/Lips/Sea/Sky/Snowman/  
Tropics/Window/Off)  
0. Display Icon: To select an icon “Display” or “Hide”.  
*. Save location: This enables you to choose where to save.  
(Phone / Card) This menu appears only when connected to a  
Trans-Flash card.  
2
3
5
5
Press camera key or press  
video.  
[REC] to take the  
To view captured videos, press  
[MY FLIX].  
By pressing  
[OPTIONS], you can choose from the following:  
1. Self Portrait: Take a video of yourself by checking the view  
on the Sub LCD.  
2. Self Timer: To activate the camera’s timer function.  
(Off/5 Seconds/10 Seconds)  
3. Movie Light: To activate the flash function. (Off/Always On)  
4. White Balance: To select white balance. (Auto/Sunny/  
Tungsten/Fluorescent)  
5. Mute/Unmute: Phone is mute or unmute while recording  
a video.  
User can control brightness and zoom directly by pressing the  
Navigation Key up and down.  
Navigation Up / Down: Zoom up/down  
(Except 480x640 mode).  
Navigation Left / Right: Brightness up/down( -2, -1, 0, +1, +2).  
98  
99  
GET IT NOW  
GET IT NOW  
User can control brightness and zoom directly by pressing the  
Navigation Key up and down.  
Navigation Up / Down: Zoom up/down.  
GET FUN & GAMES  
DOWNLOADING NEW FUN & GAMES  
Navigation Left / Right: Brightness up/down( -2, -1, 0, +1, +2).  
Press  
menu or press  
[MENU] and then select “Get It Now”  
1
and then press  
“Get Fun &  
4
5
To pause/resume recording,  
Games” and then select “Get New App.”,  
press . (Get It Now will launch and take you to  
the download menu.)  
press  
[PAUSE/RESUME].  
To stop recording, press  
[STOP].  
Use your Navigation Key to select a provider’s  
2
3
After taking the video it will be displayed.  
To save the video, press [SAVE].  
browser, press  
.
To go back to idle mode without saving the video,  
press  
Use your Navigation Key to select a game you  
wish to download, and press  
.
.
To replay video, press  
[REPLAY].  
PLAYING DOWNLOADED FUN & GAMES  
To send the video to someone, press  
[SEND].  
Please refer to page 106 for more details on  
“New PIX/FLIX MSG”.  
C
H
C
H
Press  
menu or press  
Games”.  
[MENU] and then select “Get It Now”  
1
and then press  
“Get Fun &  
5
5
PIX PLACE  
To play the game you downloaded, select the  
game and press [PLAY].  
2
Press  
menu and then press  
[MENU] and then select “Get It Now”  
1
“Get PIX & FLIX” or  
press  
and then select “PIX Place”.  
GET NEWS & INFO  
CONNECTING NEWS & INFO  
Connect “WAP Browser”.  
2
Press  
menu or press  
& Info”.  
[MENU] and then select “Get It Now”  
1
and then press  
“Get News  
Connect “WAP Browser”.  
2
100  
101  
GET IT NOW  
GET GOING  
CONNECTING GET GOING  
Press  
menu or press  
and then select  
[MENU] and then select “Get It Now”  
1
and then press  
“Get Going”  
“Get New App.”.  
Chapter 6  
GET EXTRAS  
CONNECTING GET EXTRAS  
VOICE MAIL, TXT,  
PIX/FLIX MESSAGING  
Press  
menu or press  
and then select  
[MENU] and then select “Get It Now”  
1
and then press  
“Get Extras”  
“Get New App.”.  
This chapter addresses Voice Mail, TXT, PIX/FLIX Messaging  
functions including:  
GET IT NOW INFO  
C
H
Displays information about “App Memory”, View Log” and “Help”:  
WHEN A NEW MESSAGE ARRIVES  
VOICE MAIL  
NEW TXT MSG  
NEW PIX/FLIX MSG  
INBOX  
5
1
2
Press  
menu or press  
[MENU] and then select “Get It now”  
and then press “Info”.  
C
H
Select one of the following options with the  
Navigation Key.  
6
SENT  
l
l
l
App Memory  
View Log  
Help  
DRAFTS  
E- MAIL  
MOBILE IM  
3
To return to the previous page, press  
.
CHAT  
ERASE ALL  
SETTINGS  
102  
103  
WHEN A NEW MESSAGE ARRIVES  
NEW TXT MSG  
To send a new TXT message:  
The following display appears  
when a new message arrives.  
1
Press  
[MENU] and then select “Messaging”  
menu, press “New TXT MSG” or press  
[MESSAGE], press “New TXT MSG”.  
1
2
Under “To”, input the phone number and then  
press  
.
To display the message, select “View Now” and  
2
By pressing  
[ADD], you can choose from the following:  
then press  
.
1. Contacts : Search for a phone number which is stored in  
the contacts list.  
2. Recent Calls : Search the phone number which is stored in  
the recent calls list.  
Under “Message”, input a new TXT message  
3
VOICEMAIL  
and then press  
[SEND].  
(Please refer to page 33 for more details on entering letters,  
numbers and symbols.)  
Displays the number of voice mails and accesses them by pressing  
.
Press  
following:  
[OPTIONS] and then “ADD” to choose from the  
Press  
[MENU] and then select “Messaging”  
menu, press “Voicemail” or press  
[MESSAGE], press  
1
1. Graphics : Inserts simple graphic images in TXT Msg.  
2. Sounds : Inserts EMS sound in TXT Msg.  
“Voicemail”.  
3. Quick Text : Inserts already written sentences in TXT Msg.  
FIRST TIME USER  
If one of the fields is inserted in TXT msg field, the message is  
saved in the draft box.  
Input at least one TXT msg field to save in the draft box.  
Dial *86 and then press  
[SEND].  
.
1
2
3
C
H
C
H
At the recording, press  
6
6
To save the TXT message, press  
[OPTIONS]  
4
5
To set up your account follow the voice tutorial.  
and then select “Save As Draft”.  
Press [OPTIONS] and then select “Priority Level”,  
select “High” or “Normal” and then press  
Press [OPTIONS] and then select “Call Back #”,  
select “On” and edit Call Back # or “Off”  
and then press  
EXISTING USER  
.
Dial *86 and then press  
[SEND].  
1
2
At the recording, enter your 4 digits password,  
.
and then press  
.
To send the TXT message, press  
[SEND].  
To listen to new messages, press  
.
3
104  
105  
NEW PIX/FLIX MSG  
NEW PIX/FLIX MSG  
To send a new PIX/FLIX message:  
Under “Subject”, input a subject and then press  
[SEND].  
(Please refer to page 33 for more details on entering letters,  
numbers and symbols. Max 100 characters support.)  
6
7
Press  
[MENU] and then select “Messaging”  
menu, press “New PIX/FLIX MSG” or press  
[MESSAGE], press “New PIX/FLIX MSG”.  
1
By pressing  
[OPTIONS].  
Add Quick Text : Inserts already written sentences in TXT  
Under “To”, input the phone number and then  
press  
2
Msg.  
.
By pressing  
[ADD], you can choose from the following:  
To preview a written picture message, press  
[OPTIONS] and then select “Preview”.  
1. Contacts : Search for a phone number which is stored in  
the contacts list.  
2. Recent Calls : Search for the phone number which is stored  
in the recent calls list.  
To save the PIX message, press  
and then select “Save As Draft”.  
[OPTIONS]  
3. To PIX Place : To send pictures by using online Address.  
Press  
[OPTIONS] and then select “Priority Level”,  
[OK].  
Under “Text”, input a new TXT message and  
3
select “High” or “Normal” and then press  
then press  
.
To remove picture or video, press  
and then select “Remove Picture”.  
[OPTIONS]  
(Please refer to page 33 for more details on entering letters,  
numbers and symbols. A maximum of 1,000 characters is allowed.)  
By pressing  
[OPTIONS].  
To remove sound, press  
select “Remove Sound”.  
[OPTIONS] and then  
Add Quick Text : Inserts already written sentences in TXT  
Msg.  
To add slide, press  
select “Add Slide”.  
[OPTIONS] and then  
C
H
C
H
Under “PIX or FLIX”, user can insert/remove only  
one picture or video.  
4
5
6
6
To send the PIX message, press  
[SEND].  
8
Press  
My FLIX and then picture or video you’d like to  
send and then press  
[GALLERY], select the My PIX or  
.
Under “Sound”, user can insert/remove only one  
sound. (Not insert sound in FLIX message case)  
Press  
[SOUNDS], select the sound  
you’d like to send and then press  
.
106  
107  
INBOX  
INBOX  
The Inbox manages received TXT,PIX/FLIX, Web Alert messages.  
To access:  
REPLY WITH COPY  
Select to reply with the original message  
included.  
1
2
Press  
[MENU] and then select “Messaging”  
1
menu, press “Inbox” or press  
[MESSAGE], press  
“Inbox”.  
The default call back number is automatically  
included in the Default CB# field.  
You can scroll to the number and edit it.  
: Lock  
: PIX Unread  
: Priority  
: Read  
: PIX Read  
: MMS Push  
: Wap Push  
: EMS Read  
To send the TXT or PIX/FLIX message,  
3
press  
[SEND].  
: Unread  
: EMS Unread  
FORWARD  
Select to forward the TXT or PIX/FLIX message.  
Select a message and then press  
[OPEN].  
The message is displayed. To delete a message,  
press [ERASE], press  
1
2
2
3
.
Input the phone number of the person you are  
sending the message and then press  
.
When you select WAP PUSH message,  
press  
[GET], to launch the browser.  
Input any text message to go along with the  
3
forwarded message and then press  
[SEND].  
Press  
[OPTIONS].  
SAVE PICTURE (MMS PIX)  
PLAY AGAIN  
To play a received PIX/FLIX message.  
C
H
C
H
Select to save a picture to the “My PIX” folder.  
1
1
6
6
SAVE VIDEO (MMS VIDEO)  
REPLY  
Type your reply and then press  
Select to save a video to the “My FLIX” folder.  
1
.
1
• “Reply with Copy” menu appears only when you receive a TXT  
message.  
“Play Again" menu appears only when you receive a PIX/FLIX  
message.  
• “Save Picture” menu appears only when you receive a PIX  
message.  
• “Save Video” menu appears only when you receive a FLIX  
message.  
108  
109  
INBOX  
SENT  
Manages sent TXT, PIX/FLIX messages or messages waiting to be sent.  
SAVE SOUND  
Press  
[MENU] and then select “Messaging”  
menu, press “Sent” or press [MESSAGE],  
press “Sent”.  
1
If you receive a EMS message, select to save a  
sound to the “My Ringtones” folder.  
If you receive a MMS message, select to save a  
sound to the “My Sounds” folder.  
1
: Lock  
: Priority  
: Sent  
SAVE GRAPHIC  
: Incomplete Delivery  
: Delivered  
Select to save a graphic to the “My Graphics” folder.  
1
SAVE QUICK TEXT  
: Sent but Delivery Failed  
Select to save received text msg to “Quick Text”.  
1
Select a message and then press  
[OPEN].  
The message is displayed. To delete a message,  
press [ERASE], press  
2
ADD TO CONTACTS  
.
Select to save number to contacts.  
1
FORWARD  
LOCK/UNLOCK  
Select to forward the TXT or PIX/FLIX message.  
1
2
Select to lock or unlock the TXT or PIX/FLIX  
1
2
Input the phone number of the person you are  
message.  
sending the message and then press  
.
C
H
C
H
Select “Lock” to lock the message or “Unlock”  
Input any text message to go along with the  
3
to unlock the message and then press  
.
6
6
forwarded message and then press  
[SEND].  
MESSAGE INFO  
PLAY AGAIN  
Select to play sent MMS message.  
Select to show received PIX/FLIX message  
information.  
1
1
• “Save Sound”, “Save Graphic” menu appears only when you  
receive a TXT, PIX/FLIX or EMS message.  
• “Message Info” menu appears only when you receive a PIX/FLIX  
message.  
“Play Again” menu appears only when you send a MMS message.  
• Place a call to a received message number (Include Fr/CB phone  
number) by simply pressing  
.
110  
111  
SENT  
DRAFTS  
Draft Folder contains any draft messages or saved messages.  
If message composition is interrupted by a voice call or other  
interrupting event, the text of the current composition is automatically  
saved in the drafts folder.  
RESEND  
Select to resend a TXT or PIX/FLIX message.  
1
Press  
[MENU] and then select “Messaging”  
1
ERASE  
To erase this message, select “Erase” and then  
menu, press “Drafts” or press  
[MESSAGE], press  
“Drafts”.  
1
select “Yes”, press  
ADD TO CONTACTS  
Select to save number to contacts.  
.
: Lock  
: SMS/EMS Drafts  
: PIX Drafts  
Select a message and then press  
The message is displayed. To delete a message,  
press  
Press  
[EDIT].  
2
3
1
[ERASE], press  
[OPTIONS].  
.
LOCK/UNLOCK  
Select to lock or unlock the TXT or PIX/FLIX  
message.  
1
2
SEND  
Select “Lock” to lock the message or “Unlock”  
Select to send a selected message.  
1
to unlock the message and then press  
.
ADD TO CONTACTS  
SAVE QUICK TEXT  
Select to save received text msg to “Quick Text”.  
C
H
C
H
Select to save number to contacts.  
1
1
6
6
LOCK/UNLOCK  
MESSAGE INFO  
Select to show send PIX/FLIX message  
Select to lock or unlock the TXT or PIX/FLIX  
message.  
1
2
1
information.  
Select “Lock” to lock the message or “Unlock”  
to unlock the message and then press  
.
Place a call to a send message number by simply pressing  
.
SAVE QUICK TEXT  
Select to save draft text msg to “Quick Text”.  
1
112  
113  
E- MAIL  
MOBILE IM  
Press  
menu, press  
[MESSAGE], press  
Browser launches.  
[MENU] and then select “Messaging”  
1
2
1
2
Press  
menu, press  
[MESSAGE], press  
select “Get New App.” with Navigation Key.  
[MENU] and then select “Messaging”  
“E-mail” or press  
“E-mail”.  
“Mobile IM” or press  
“Mobile IM” and then  
Connect “Mobile IM”.  
C
H
C
H
6
6
114  
115  
CHAT  
ERASE ALL  
Press  
menu, press  
press “Chat”.  
[MENU] and then select “Messaging”  
Press  
menu, press  
[MESSAGE], press  
[MENU] and then select “Messaging”  
1
2
1
2
“Chat” or press  
[MESSAGE],  
[OPTIONS] or press  
[OPTIONS].  
2.1. To erase all the inbox messages,  
press [ERASE INBOX].  
Browser launches.  
2.2. To erase all the drafts messages,  
press [ERASE DRAFTS].  
2.3. To erase the sent messages,  
press [ERASE SENT].  
2.4. To erase the all message,  
press [ERASE ALL].  
Select “Yes” and then press  
.
3
C
H
C
H
6
6
116  
117  
SETTINGS  
SETTINGS  
Manages messaging features through various features.  
AUTO VIEW TXT  
If the “Auto View Txt” is set to on, the user will be able to directly  
view the message. If the “Auto View Txt” is set to off, the user can  
view the message by entering SMS Menu-> Inbox.  
AUTO SAVE  
Press  
menu, press  
[MESSAGE], press  
[MENU] and then select “Messaging”  
1
Press  
[MENU] and then select “Messaging”  
menu, press [SETTINGS] or press  
[MESSAGE], press [SETTINGS].  
1
[SETTINGS] or press  
[SETTINGS].  
Press  
[AUTO SAVE].  
2
Press  
[AUTO VIEW TXT].  
2
Select “On”, “Off” or “Prompt” with the  
Navigation Key.  
Select “On” or “Off” with the Navigation Key.  
On : Text message automatically displays.  
On : All sent messages saved in the Sent box.  
Off : User can retrieve messages from the Inbox after selecting  
yes or no.  
Off : All sent messages not saved in the Sent box  
Prompt : “Yes”, “No” dialogue box displayed after sent message.  
Press  
.
3
Press  
.
3
AUTO RECEIVE  
AUTO ERASE  
Automatically erases inbox messages when new messages arrive.  
Press  
menu, press  
[MESSAGE], press  
[MENU] and then select “Messaging”  
1
[SETTINGS] or press  
[SETTINGS].  
Press  
[MENU] and then select “Messaging”  
menu, press [SETTINGS] or press  
[MESSAGE], press [SETTINGS].  
1
2
C
H
C
H
Press  
[AUTO RECEIVE].  
2
6
6
Select “On” or “Off” with the Navigation Key.  
Press  
[AUTO ERASE].  
Select “On” or “Off” with the Navigation Key.  
On : PIX message automatically downloaded.  
On : When inbox is full, oldest message is erased.  
Off : When inbox is full, oldest message is not erased.  
Off : User can retrieve messages by selecting “View Now”.  
Press  
.
3
Press  
.
3
If message is “Unread” or “Lock”, that can’t Erase  
.
118  
119  
SETTINGS  
SETTINGS  
SIGNATURE  
VOICE MAIL#  
Create a signature that can be automatically inserted at the end of a  
message.  
Press  
menu, press  
[MESSAGE], press  
[MENU] and then select “Messaging”  
1
[SETTINGS] or press  
[SETTINGS].  
Press  
[MENU] and then select “Messaging”  
menu, press [SETTINGS] or press  
[MESSAGE], press [SETTINGS].  
1
Press  
[VOICE MAIL#].  
2
3
Input a new voice call back number or edit  
voice call back number.  
Press  
[SIGNATURE].  
2
To activate Signature function, put the cursor  
on Insert Signature then select “Custom” by  
using up or down direction keys. To deactivate  
Signature function, select “None”.  
Press  
.
BLOCK/UNBLOCK  
To input “Signature”, put the cursor on Edit  
Signature and then enter Signature Edit window  
by using right or left direction keys.  
3
4
Press  
menu, press  
[MENU] and then select “Messaging”  
1
[SETTINGS] or press  
[SETTINGS].  
[MESSAGE], press  
Press  
.
Press  
[BLOCK/UNBLOCK].  
2
CALLBACK#  
Select “Block”, “Unblock” or “View List of  
Blocked Addresses” with the Navigation Key.  
Edits a default callback number so that the recipient can callback or  
reply.  
C
H
C
H
BLOCK : Enter the address to block.  
Press  
[MENU] and then select “Messaging”  
menu, press [SETTINGS] or press  
[MESSAGE], press [SETTINGS].  
1
UNBLOCK : Enter the address to remove from block.  
VIEW LIST OF BLOCKED ADDRESSES : Display the blocked  
list on LCD.  
6
6
Press  
[CALLBACK#].  
2
3
Press  
.
3
Select “On” or “Off” with the Navigation Key.  
Select “On” and then input a callback number,  
press  
.
120  
121  
SETTINGS  
SETTINGS  
ENTRY MODE  
FONT SIZE  
Sets an Entry Mode as a default. For example, if input Mode is the  
default, its icon will appear.  
Press  
menu, press  
[MESSAGES], press  
[MENU] and then select “Messaging”  
1
[SETTINGS] or press  
[SETTINGS].  
Press  
[MENU] and then select “Messaging”  
menu, press [SETTINGS] or press  
[MESSAGE], press [SETTINGS].  
1
Press  
[FONT SIZE].  
2
Press  
[ENTRY MODE].  
Select “Small”, “Large” or “Normal” with the  
Navigation Key.  
2
3
Select “Word”, “Abc”, “ABC” or “123” with the  
Navigation Key.  
Press  
.
3
Press  
.
QUICK TEXT  
To edit the Quick Text message you have saved:  
Press  
menu, press  
[MESSAGE], press  
[MENU] and then select “Messaging”  
1
2
[SETTINGS] or press  
[SETTINGS].  
Press  
2.1. Select a message from  
the list. Press  
[QUICK TEXT].  
.
C
H
C
H
2.2. To add a new Quick Text  
message, press  
6
6
[NEW] then enter text,  
press  
.
To erase the saved Quick Text message,  
3
press  
[ERASE].  
Pre-defined Quick Text messages include:  
1. What’s up?/2. Let’s meet./3. Check this out!/4. Whacha  
doing?/5. Thanks/6. What do you think?/7. You’ve gotta be here  
to enjoy this./8. Would you like to join me for a date tonight?/  
9. On my way./10. Yes/11. You’re the best!/12. Call me.  
122  
123  
MEMO  
Chapter 7  
MOBILE WEB 2.0  
This chapter addresses Internet services and web browsing.  
For more detailed information contact your service provider.  
STARTING INTERNET BROWSER  
BROWSER MENU  
C
H
6
C
H
7
124  
125  
STARTING INTERNET BROWSER  
BROWSER MENU  
LAUNCHING MOBILE WEB 2.0  
REFRESH  
Now you can access news, sports, weather, and e-mail from your  
phone. Mobile Web 2.0 keeps you updated by providing access to  
up-to-date information such as news, sports, weather and stock  
quotes when you subscribe to Internet service with your service  
provider. Please contact your service provider for a list of available  
websites and service details.  
Selecting the “Refresh” item from the Browser Menu refreshes the  
current page.  
To select “Refresh”:  
1
Press  
and then press  
[MENU]  
.
To start your Internet browser and access  
websites through your wireless handset press  
1
HISTORY  
.
The history list is available from the Browser Menu and the user may  
delete all items from the history.  
To select “History”:  
1
BROWSER MENU  
Press  
and then press  
[MENU]  
.
The browser menu lists the actions necessary to operate the browser.  
To access, press  
and then press  
[MENU].  
ADDRESS  
VZW HOME  
Selecting the “Address” item from the Browser Menu displays the  
URL of the current page.  
When the “VZW Home” item is selected from the Browser Menu,  
the phone displays the homepage.  
To select “Address”:  
1
Press  
and then press  
[MENU]  
.
To display the homepage:  
Press  
1
and then press  
[MENU]  
.
CLEAR MEMORY  
BACK  
When the “Back” item is selected from the Browser Menu, the phone  
displays the previous page in the history.  
The user may clear cache, history, cookies and auto fill from the  
memory.  
To return to the previous page:  
1
To clear browser memory:  
1
Press  
and then press  
[MENU]  
.
C
H
C
H
Press  
and then press  
[MENU]  
.
FORWARD  
7
7
When the “Forward” item is selected from the Browser Menu, the phone  
displays the next page in the history. This is only available if the user has  
navigated backward in the history.  
To forward to the next page:  
1
Press  
and then press  
[MENU]  
.
126  
127  
BROWSER MENU  
BROWSER MENU  
SETTINGS  
ADVANCED  
Selecting the “Advanced” item in the Browser Menu displays the  
advanced menu items.  
To select “Settings”:  
1
Press  
and then press  
[MENU]  
.
To select “Advanced”:  
1
Downloads : Selecting the “Downloads” item allows the user to  
enable/disable downloading images, background sounds, and  
object downloads when a URL is accessed.  
Press  
and then press  
[MENU]  
.
About... : When the “About” item is selected, information about  
the browser version, copyright information and certificate  
information is displayed.  
Restart Browser : Selecting “Restart Browser” causes the  
history and cache to be cleared and returns the user to the  
homepage.  
Encryption : Selecting the “Encryption” item from the Advanced  
Menu enables the user access to Encryption features of the  
browser.  
Scroll Mode : Selecting the “Scroll Mode” allows the user to  
select between time-square scrolling (referred to as block  
scrolling) and smooth scrolling and to select the speed of the  
smooth scrolling. Scrolling speed choices are medium, fast,  
and slow.  
1. Authentication : The “Authentication” item in the  
Encryption menu allows the user to toggle  
authentication caching.  
Send Referrer : When the “Send Referrer” item is selected  
from the Settings menu, the browser allows the user to turn on  
or off sending the referrer URL.  
2. Root Certificate : The “Root Certificate” item in  
the Encryption menu allows the user to view the  
list of certificates.  
Key Press Timeout : When the “Key Press Timeout” item is  
selected from the Settings menu, the browser allows the user to  
set the key press timeout as fast, medium or slow. Medium is  
1.5 seconds, slow 2 seconds and fast is 1 second. The key  
press timeout is the period of time after which the cursor auto-  
advances to the next entry position. In most cases, a single key  
can be used to enter more than one character. Each time the  
key is pressed the last character of the line is replaced by the  
next choice for that key. As long as the same key is re-pressed  
within key press timeout, the last character cycles between all  
the choices for the key.  
3. Current Certificate : The “Current Certificate”  
item in the Encryption menu allows the user to  
view the current certificate. This is only available if  
a secure connection is established.  
EXIT  
When the “Exit” item is selected from the Browser Menu, the user  
exits out of the browser and is returned to the phone idle mode.  
Connection Timeout : When the Connection Timeout item is  
selected from the Settings menu, the browser allows the user to  
set the connection timeout. The connection timeout determines  
how long the browser will wait for a response from the network  
for a network request.  
To exit browser:  
1
Press  
press  
and then press  
.
[MENU]  
or  
C
H
C
H
7
7
128  
129  
MEMO  
Chapter 8  
SAFETY AND  
WARRANTY  
This chapter addresses the safety guidelines and precautions to  
follow when operating your phone. Before operating your phone,  
please be aware of all the safety details.  
This chapter contains the terms and conditions of services and the  
warranty for your phone. Please review them thoroughly.  
SAFETY INFORMATION FOR WIRELESS  
HANDHELD PHONES  
SAFETY INFORMATION FOR FCC RF EXPOSURE  
SAR INFORMATION  
HEARING AID COMPATIBILITY WITH MOBILE PHONES  
FDA CONSUMER UPDATE  
C
H
PROTECT YOUR WARRANTY  
7
12 MONTH LIMITED WARRANTY  
C
H
8
130  
131  
SAFETY INFORMATION FOR WIRELESS  
HANDHELD PHONES  
SAFETY INFORMATION FOR WIRELESS  
HANDHELD PHONES  
Read This Information Before Using Your Handheld  
Portable Cellular Telephone  
DRIVING SAFETY  
Talking on the phone while driving is extremely dangerous and is illegal in  
some states. Remember, safety comes first. Check the laws and regulations  
on the use of phones in the areas where you drive. Always obey them.  
EXPOSURE TO RADIO FREQUENCY SIGNALS  
Also, if using your phone while driving, please:  
Your wireless handheld portable telephone is a low power radio  
transmitter and receiver. When it is ON, it receives and also sends out  
radio frequency (RF) signals.  
l
l
l
Give full attention to driving. Safe driving is your first responsibility.  
Use hands-free operation, if available.  
In August 1996, the Federal Communications Commissions (FCC)  
adopted RF exposure guidelines with safety levels for handheld wireless  
phones. Those guidelines are consistent with the safety standards  
previously set by both U.S. and international standards bodies:  
Pull off the road and park before making or answering a call, if driving  
conditions so require.  
ANSI C95.1 (1992) *  
NCRP Report 86 (1986) *  
ICNIRP (1996) *  
If you must use the phone while driving, please use one-touch, speed dialing,  
and auto answer modes.  
An airbag inflates with great force. DO NOT place objects, including both  
installed or portable wireless equipment, in the area over the airbag or in the  
air bag deployment area. If in-vehicle wireless equipment is improperly  
installed and the air bag inflates, serious injury could result.  
Those standards were based on comprehensive and periodic evaluations  
of the relevant scientific literature. For example, over 120 scientists,  
engineers, and physicians from universities, government health agencies,  
and industry reviewed the available body of research to develop the ANSI  
Standard (C951).  
WARNING: Failure to follow these instructions may lead to serious  
personal injury and possible property damage.  
The design of your phone complies with the FCC guidelines (and those  
standards).  
ANTENNA CARE  
Use only the supplied or an approved replacement antenna. Unauthorized  
antennas, modifications, or attachments could damage the phone and  
may violate FCC regulations.  
C
H
C
H
8
8
1* : American National Standards Institute.  
2* : National Council on Radiation protection and measurements.  
3* : International Commission on Nonionizing Radiation Protection.  
132  
133  
SAFETY INFORMATION FOR WIRELESS  
HANDHELD PHONES  
SAFETY INFORMATION FOR WIRELESS  
HANDHELD PHONES  
ELECTRONIC DEVICES  
OTHER SAFETY GUIDELINES  
Most modern electronic equipment is shielded from RF energy. However,  
certain electronic equipment may not be shielded against the RF signals  
from your wireless phone.  
AIRCRAFT  
FCC and Transport Canada Regulations prohibit using your phone while  
in the air. Turn your phone OFF before boarding an aircraft.  
PACEMAKERS  
The Health Industry Manufacturers Association recommends that a  
minimum separation of six (6”) inches be maintained between a handheld  
wireless phone and a pacemaker to avoid potential interference with the  
pacemaker. These recommendations are consistent with the independent  
research by and recommendations of Wireless Technology Research.  
Persons with pacemakers :  
BLASTING AREAS  
To avoid interfering with blasting operations, turn your phone OFF when in  
a “blasting area” or in areas posted: “Turn off two-way radio.” Obey all  
signs and instructions.  
POTENTIALLY EXPLOSIVE ATMOSPHERES  
l
ALWAYS keep the phone more than six inches from your  
pacemaker when the phone is turned on.  
Turn your phone OFF when in any area with a potentially explosive  
atmosphere and obey all signs and instructions. Sparks in such areas  
could cause an explosion or fire resulting in bodily injury or even  
death.  
l
l
Do not carry the phone in a breast pocket.  
Use the ear opposite the pacemaker to minimize the potential for  
interference.  
Areas with a potentially explosive atmosphere are often, but not  
always, clearly marked. They include fueling areas such as gas  
stations; below deck on boats; fuel or chemical transfer or storage  
facilities; vehicles using liquefied petroleum gas (such as propane or  
butane); areas where the air contains chemicals or particles, such as  
grain, dust, or metal powders; and any other area where you would  
normally be advised to turn off your vehicle’s engine.  
l
If you have any reason to suspect that interference is taking place,  
turn your phone OFF immediately.  
OTHER MEDICAL DEVICES  
If you use any other personal medical device, consult with the manufacturer  
of your device to determine if they are adequately shielded from external  
RF energy. Your physician may be able to assist you in obtaining this  
information.  
Turn your phone OFF in healthcare facilities when any regulations posted in  
these areas instruct you to do so. Hospitals or healthcare facilities may be  
using equipment that could be sensitive to external RF energy.  
POSTED FACILITIES  
Turn your phone OFF where posted notices so require.  
C
H
C
H
8
8
134  
135  
SAFETY INFORMATION FOR  
FCC RF EXPOSURE  
SAFETY INFORMATION FOR WIRELESS  
HANDHELD PHONES  
PRECAUTIONS  
WARNING! Read this Information before using  
Your Handheld Portable Telephone is a high quality piece of  
equipment. Before operating, read all instructions and cautionary  
markings on (1) AC Adaptor (2) Battery and (3) Product Using Battery.  
CAUTIONS  
In August 1996 the Federal Communications Commission (FCC) of  
the United States with its action in Report and Order FCC 96-326  
adopted an updated safety standard for human exposure to radio  
frequency electromagnetic energy emitted by FCC regulated  
transmitters. Those guidelines are consistent with the safety standard  
previously set by both U.S. and international standards bodies. The  
design of this phone complies with the FCC guidelines and these  
international standards.  
Use only the supplied or an approved antenna. Unauthorized  
antennas, modifications, or attachments could impair call quality,  
damage the phone, or result in violation of FCC regulations.  
Do not use the phone with a damaged antenna. If a damaged  
antenna comes into contact with the skin, a minor burn may result.  
Please contact your local dealer for replacement antenna.  
DO NOT use this equipment in an extreme environment where  
high temperature or high humidity exists.  
DO NOT abuse the equipment. Avoid striking, shaking or  
shocking. When not using, lay down the unit to avoid possible  
damage due to instability.  
DO NOT expose this equipment to rain or spilled beverages.  
DO NOT use unauthorized accessories.  
BODY-WORN OPERATION  
DO NOT disassemble the phone or its accessories. If service or  
repair is required, return unit to an authorized cellular service  
center. If unit is disassembled, the risk of electric shock or fire  
may result.  
This device was tested for typical body-worn operations with the  
back of the phone kept 2.0 cm. from the body. To maintain  
compliance with FCC RF exposure requirements, use only belt-clips,  
holsters or similar accessories that maintain a 2.0 cm. separation  
distance between the user’s body and the back of the phone,  
including the antenna. The use of belt-clips, holsters and similar  
accessories should not contain metallic components in its assembly.  
The use of accessories that do not satisfy these requirements may  
not comply with FCC RF exposure requirements, and should be  
avoided.  
DO NOT short-circuit the battery terminals with metal items etc.  
WARNING!  
This product contains a chemical known to the State of  
California to cause cancer.  
For more information about RF exposure, please visit the FCC  
This product contains a chemical known to the State of  
California to cause birth defects or other reproductive harm.  
C
H
C
H
8
8
136  
137  
SAR INFORMATION  
SAR INFORMATION  
THIS MODEL PHONE MEETS THE GOVERNMENT’S  
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.  
Additional information on Specific Absorption Rates (SAR) can be found  
on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-  
Your wireless phone is a radio transmitter and receiver. It is designed  
and manufactured not to exceed the emission limits for exposure to  
radiofrequency (RF) energy set by the Federal Communications  
Commission of the U.S. Government. These limits are part of  
comprehensive guidelines and establish permitted levels of RF energy  
for the general population. The guidelines are based on standards that  
were developed by independent scientific organizations through  
periodic and thorough evaluation of scientific studies. The standards  
include a substantial safety margin designed to assure the safety of all  
persons, regardless of age and health.  
* In the United States and Canada, the SAR limit for mobile phones  
used by the public is 1.6 watts/kg (W/kg) averaged over one gram of  
tissue. The standard incorporates a sub-stantial margin of safety to give  
additional protection for the public and to account for any variations in  
measurements.  
The exposure standard for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate, or SAR. The SAR  
limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the  
phone transmitting at its highest certified power level in all tested  
frequency bands. Although the SAR is determined at the highest  
certified power level, the actual SAR level of the phone while operating  
can be well below the maximum value. This is because the phone is  
designed to operate at multiple power levels so as to use only the  
power required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Before a phone model is available for sale to the public, it must be  
tested and certified to the FCC that it does not exceed the limit  
established by the government adopted requirement for safe exposure.  
The tests are performed in positions and locations (e.g., at the ear and  
worn on the body) as required by the FCC for each model. The highest  
SAR value for this model phone when tested for use at the ear is 1.15  
W/Kg and when worn on the body, as described in this user guide, is  
0.393W/Kg. (Body-worn measurements differ among phone models,  
depending upon available accessories and FCC requirements). While  
there may be differences between the SAR levels of various phones  
and at various positions, they all meet the government requirement for  
safe exposure.  
The FCC has granted an Equipment Authorization for this model phone  
with all reported SAR levels evaluated as in compliance with the FCC  
RF exposure guidelines. SAR information on this model phone is on file  
with the FCC and can be found under the Display Grant section of  
C
H
C
H
8
8
138  
139  
FCC HEARING-AID COMPATIBILITY (HAC)  
REGULATIONS FOR WIRELESS DEVICES  
FCC HEARING-AID COMPATIBILITY (HAC)  
REGULATIONS FOR WIRELESS DEVICES  
On July 10, 2003, the U.S. Federal Communications Commission  
(FCC) Report and Order in WT Docket 01-309 modified the exception of  
wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC  
Act) to require digital wireless phones be compatible with hearing-aids.  
The intent of the HAC Act is to ensure reasonable access to  
telecommunications services for persons with hearing disabilities.  
In the above example, if a hearing aid meets the M2 level rating and the  
wireless phone meets the M3 level rating, the sum of the two values  
equal M5. This should provide the hearing aid user with “normal usage”  
while using their hearing aid with the particular wireless phone. “Normal  
usage” in this context is defined as a signal quality that is acceptable  
for normal operation.  
While some wireless phones are used near some hearing devices  
(hearing aids and cochlear implants), users may detect a buzzing,  
humming, or whining noise. Some hearing devices are more immune  
than others to this interference noise, and phones also vary in the  
amount of interference they generate.  
The M mark is intended to be synonymous with the U mark. The T mark  
is intended to be synonymous with the UT mark. The M and T marks  
are recommended by the Alliance for Telecommunications Industries  
Solutions (ATIS). The U and UT marks are referenced in Section 20.19  
of the FCC Rules. The HAC rating and measurement procedure are  
described in the American National Standards Institute (ANSI) C63.19  
standard.  
The wireless telephone industry has developed a rating system for  
wireless phones, to assist hearing device users find phones that may be  
compatible with their hearing devices. Not all phones have been rated.  
Phones that are rated have the rating on their box or a label located on  
the box.  
For information about hearing aids and digital wireless phone  
l
l
l
l
Fcc Hearing Aid Compatibility and Volume Control  
The ratings are not guarantees. Results will vary depending on the  
user’s hearing device and hearing loss. If your hearing device happens  
to be vulnerable to interference, you may not be able to use a rated  
phone successfully. Trying out the phone with your hearing device is  
the best way to evaluate it for your personal needs.  
Gallaudet University, RERC  
Self Help for Hard of Hearing People Inc. [SHHH]  
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are  
likely to generate less interference to hearing devices than phones that  
are not labeled. M4 is the better/higher of the two ratings.  
The Hearing Aid Compatibility FCC Order  
FCC-03-168A1.pdf  
Hearing devices may also be rated. Your hearing device manufacturer  
or hearing health professional may help you find this rating. Higher  
ratings mean that the hearing device is relatively immune to interference  
noise. The hearing aid and wireless phone rating values are then added  
together. A sum of 5 is considered acceptable for normal use. A sum of  
6 is considered for best use.  
C
H
C
H
8
8
140  
141  
FDA CONSUMER UPDATE  
FDA CONSUMER UPDATE  
These types of wireless phones can expose the user to measurable radiofrequency  
energy (RF) because of the short distance between the phone and the user’s head.  
These RF exposures are limited by Federal Communications Commission safety  
guidelines that were developed with the advice of FDA and other federal health and  
safety agencies. When the phone is located at greater distances from the user, the  
exposure to RF is drastically lower because a person’s RF exposure decreases  
rapidly with increasing distance from the source. The so-called “cordless phones,”  
which have a base unit connected to the telephone wiring in a house, typically  
operate at far lower power levels, and thus produce RF exposures far below the  
FCC safety limits.  
U.S. Food and Drug Administration -Center for Devices and  
Radiological Health Consumer Update on Wireless Phones  
1. Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health problems are  
associated with using wireless phones. There is no proof, however, that wireless  
phones are absolutely safe. Wireless phones emit low levels of radiofrequency  
energy (RF) in the microwave range while being used. They also emit very low  
levels of RF when in the stand-by mode. Whereas high levels of RF can produce  
health effects (by heating tissue), exposure to low level RF that does not produce  
heating effects causes no known adverse health effects. Many studies of low level  
RF exposures have not found any biological effects. Some studies have suggested  
that some biological effects may occur, but such findings have not been confirmed  
by additional research. In some cases, other researchers have had difficulty in  
reproducing those studies, or in determining the reasons for inconsistent results.  
4. What are the results of the research done already?  
The research done thus far has produced conflicting results, and many studies  
have suffered from flaws in their research methods. Animal experiments  
investigating the effects of radiofrequency energy (RF) exposures characteristic of  
wireless phones have yielded conflicting results that often cannot be repeated in  
other laboratories. A few animal studies, however, have suggested that low levels  
of RF could accelerate the development of cancer in laboratory animals. However,  
many of the studies that showed increased tumor development used animals that  
had been genetically engineered or treated with cancer-causing chemicals so as to  
be predisposed to develop cancer in the absence of RF exposure. Other studies  
exposed the animals to RF for up to 22 hours per day. These conditions are not  
similar to the conditions under which people use wireless phones, so we don’t  
know with certainty what the results of such studies mean for human health. Three  
large epidemiology studies have been published since December 2000. Between  
them, the studies investigated any possible association between the use of  
wireless phones and primary brain cancer, glioma, meningioma, or acoustic neu-  
roma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the  
studies demonstrated the existence of any harmful health effects from wireless  
phone RF exposures. However, none of the studies can answer questions about  
long-term exposures, since the average period of phone use in these studies was  
around three years.  
2. What is FDA’s role concerning the safety of wireless phones?  
Under the law, FDA does not review the safety of radiation-emitting consumer  
products such as wireless phones before they can be sold, as it does with new  
drugs or medical devices. However, the agency has authority to take action if  
wireless phones are shown to emit radiofrequency energy (RF) at a level that is  
hazardous to the user. In such a case, FDA could require the manufacturers of  
wireless phones to notify users of the health hazard and to repair, replace or recall  
the phones so that the hazard no longer exists. Although the existing scientific data  
do not justify FDA regulatory actions, FDA has urged the wireless phone industry  
to take a number of steps, including the following:  
• Support needed research into possible biological effects of RF of the type  
emitted by wireless phones;  
• Design wireless phones in a way that minimizes any RF exposure to the user  
that is not necessary for device function;  
and  
5. What research is needed to decide whether RF exposure from wireless  
phones poses a health risk?  
• Cooperate in providing users of wireless phones with the best possible  
information on possible effects of wireless phone use on human health.  
FDA belongs to an interagency working group of the federal agencies that have  
responsibility for different aspects of RF safety to ensure coordinated efforts at the  
federal level. The following agencies belong to this working group:  
• National Institute for Occupational Safety and Health  
• Environmental Protection Agency  
• Federal Communications Commission  
• Occupational Safety and Health Administration  
• National Telecommunications and Information Administration  
The National Institutes of Health participates in some inter-agency working group  
activities, as well. FDA shares regulatory responsibilities for wireless phones with  
the Federal Communications Commission (FCC). All phones that are sold in the  
United States must comply with FCC safety guidelines that limit RF exposure. FCC  
relies on FDA and other health agencies for safety questions about wireless  
phones. FCC also regulates the base stations that the wireless phone networks  
rely upon. While these base stations operate at higher power than do the wireless  
phones themselves, the RF exposures that people get from these base stations are  
typically thousands of times lower than those they can get from wireless phones.  
Base stations are thus not the subject of the safety questions discussed in this  
document.  
A combination of laboratory studies and epidemiological studies of people actually  
using wireless phones would provide some of the data that are needed. Lifetime  
animal exposure studies could be completed in a few years. However, very large  
numbers of animals would be needed to provide reliable proof of a cancer  
promoting effect if one exists. Epidemiological studies can provide data that is  
directly applicable to human populations, but 10 or more years’ follow-up may be  
needed to provide answers about some health effects, such as cancer. This is  
because the interval between the time of exposure to a cancer-causing agent and  
the time tumors develop - if they do -may be many, many years. The interpretation  
of epidemiological studies is hampered by difficulties in measuring actual RF  
exposure during day-to-day use of wireless phones. Many factors affect this  
measurement, such as the angle at which the phone is held, or which model of  
phone is used.  
6. What is FDA doing to find out more about the possible health effects of  
wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and with groups of  
investigators around the world to ensure that high priority animal studies are  
conducted to address important questions about the effects of exposure to  
radiofrequency energy (RF). FDA has been a leading participant in the World Health  
Organization International Electromagnetic Fields (EMF) Project since its inception  
in 1996. An influential result of this work has been the development of a detailed  
agenda of research needs that has driven the establishment of new research  
programs around the world.  
C
H
C
H
8
8
3. What kinds of phones are the subject of this update?  
The term “wireless phone” refers here to hand-held wireless phones with built-in  
antennas, often called “cell,” “mobile,” or “PCS” phones.  
142  
143  
FDA CONSUMER UPDATE  
FDA CONSUMER UPDATE  
The Project has also helped develop a series of public information documents on  
EMF issues. FDA and the Cellular Telecommunications & Internet Association  
(CTIA) have a formal Cooperative Research and Development Agreement (CRADA)  
to do research on wireless phone safety. FDA provides the scientific oversight,  
obtaining input from experts in government, industry, and academic organizations.  
CTIA-funded research is conducted through contracts to independent  
investigators. The initial research will include both laboratory studies and studies of  
wireless phone users. The CRADA will also include a broad assessment of  
additional research needs in the context of the latest research developments  
around the world.  
Again, the scientific data do not demonstrate that wireless phones are harmful. But  
if you are concerned about the RF exposure from these products, you can use  
measures like those described above to reduce your RF exposure from wireless  
phone use.  
10. What about children using wireless phones?  
The scientific evidence does not show a danger to users of wireless phones,  
including children and teenagers. If you want to take steps to lower exposure to  
radiofrequency energy (RF), the measures described above would apply to children  
and teenagers using wireless phones. Reducing the time of wireless phone use  
and increasing the distance between the user and the RF source will reduce RF  
exposure. Some groups sponsored by other national governments have advised  
that children be discouraged from using wireless phones at all. For example, the  
government in the United Kingdom distributed leaflets containing such a  
recommendation in December 2000. They noted that no evidence exists that  
using a wireless phone causes brain tumors or other ill effects. Their  
recommendation to limit wireless phone use by children was strictly precautionary;  
it was not based on scientific evidence that any health hazard exists.  
7. How can I find out how much radiofrequency energy exposure I can get by  
using my wireless phone?  
All phones sold in the United States must comply with Federal Communications  
Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC  
established these guidelines in consultation with FDA and the other federal health  
and safety agencies. The FCC limit for RF exposure from wireless telephones is set  
at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC  
limit is consistent with the safety standards developed by the Institute of Electrical  
and Electronic Engineering (IEEE) and the National Council on Radiation Protection  
and Measurement. The exposure limit takes into consideration the body’s ability to  
remove heat from the tissues that absorb energy from the wireless phone and is  
set well below levels known to have effects. Manufacturers of wireless phones  
must report the RF exposure level for each model of phone to the FCC. The FCC  
identification number on your phone so you can find your phone’s RF exposure  
level in the online listing.  
11. What about wireless phone interference with medical equipment?  
Radiofrequency energy (RF) from wireless phones can interact with some  
electronic devices. For this reason, FDA helped develop a detailed test method to  
measure electromagnetic interference (EMI) of implanted cardiac pacemakers and  
defibrillators from wireless telephones. This test method is now part of a standard  
sponsored by the Association for the Advancement of Medical instrumentation  
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and  
many other groups, was completed in late 2000. This standard will allow  
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from  
wireless phone EMI. FDA has tested hearing aids for interference from handheld  
wireless phones and helped develop a voluntary standard sponsored by the  
Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test  
methods and performance requirements for hearing aids and wireless phones so  
that that no interference occurs when a person uses a “compatible” phone and a  
“compatible” hearing aid at the same time. This standard was approved by the  
IEEE in 2000. FDA continues to monitor the use of wireless phones for possible  
interactions with other medical devices. Should harmful interference be found to  
occur, FDA will conduct testing to assess the interference and work to resolve the  
problem.  
8. What has FDA done to measure the radiofrequency energy coming from  
wireless phones ?  
The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical  
standard for measuring the radiofrequency energy (RF) exposure from wireless  
phones and other wireless handsets with the participation and leadership of FDA  
scientists and engineers. The standard, “Recommended Practice for Determining  
the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to  
Wireless Communications Devices: Experimental Techniques,” sets forth the first  
consistent test methodology for measuring the rate at which RF is deposited in the  
heads of wireless phone users. The test method uses a tissue-simulating model of  
the human head. Standardized SAR test methodology is expected to greatly  
improve the consistency of measurements made at different laboratories on the  
same phone. SAR is the measurement of the amount of energy absorbed in tissue,  
either by the whole body or a small part of the body. It is measured in watts/kg (or  
milliwatts/g) of matter. This measurement is used to determine whether a wireless  
phone complies with safety guidelines.  
12. Where can I find additional information?  
For additional information, please refer to the following resources:  
• Federal Communications Commission (FCC) RF Safety Pro-gram  
(http://www.fcc.gov/oet/rfsafety)  
• International Commission on Non-Ionizing Radiation Protec-tion  
(http://www.icnirp.de)  
• World Health Organization (WHO) International EMF Project  
(http://www.who.int/emf)  
• National Radiological Protection Board (UK) (http://www.nrpb.org.uk/)  
9. What steps can I take to reduce my exposure to radiofrequency energy  
from my wireless phone?  
If there is a risk from these products—and at this point we do not know that there  
is—it is probably very small. But if you are concerned about avoiding even  
potential risks, you can take a few simple steps to minimize your exposure to  
radiofrequency energy (RF). Since time is a key factor in how much exposure a  
person receives, reducing the amount of time spent using a wireless phone will  
reduce RF exposure.  
C
H
C
H
• If you must conduct extended conversations by wireless phone every day, you  
could place more distance between your body and the source of the RF, since  
the exposure level drops off dramatically with distance. For example, you could  
use a headset and carry the wireless phone away from your body or use a  
wireless phone connected to a remote antenna.  
8
8
144  
145  
PROTECT YOUR WARRANTY  
12 MONTH LIMITED WARRANTY  
Read your Warranty carefully, with the special consideration to  
paragraph seven of the Limited Warranty for your unit.  
UTStarcom Personal Communications (the Company) warrants to the  
original retail purchaser of this Audiovox handheld portable cellular  
telephone, that should this product or any part thereof during normal  
consumer usage and conditions, be proven defective in material or  
workmanship that results in product failure within the first twelve (12)  
month period from the date of purchase, such defect(s) will be repaired  
or replaced (with new or rebuilt parts) at the Company’s option, without  
charge for parts or labor directly related to the defect(s).  
“Warranty does not apply to... or to any product or part  
thereof which has suffered through alteration... mishandling  
misuse, neglect or accident”.  
Many companies are making look alike accessories and in some cases,  
promoting that their product is equal to or better than the UTStarcom  
product. Be careful. Some of these products may not be compatible to  
use with your UTStarcom product and may damage the unit or cause it  
to malfunction. If service is required on your unit and it is determined  
that a non-UTStarcom accessory has created the problem with your  
unit, the Warranty will not apply. In addition, if the unit has already  
suffered irreversible damage by reason of a non-compatible accessory,  
the Warranty will be voided. To protect your Warranty, use only  
compatible accessories which cannot damage or interfere with the  
functioning of your UTStarcom product.  
The antenna, keypad, display, rechargeable battery and battery  
charger, if included, are similarly warranted for twelve (12) months from  
date of purchase.  
This Warranty extends only to consumers who purchase the product in  
the United States or Canada and it is not transferable or assignable.  
This Warranty does not apply to:  
(a) Product subjected to abnormal use or conditions, accident,  
mishandling, neglect, unauthorized alteration, misuse, improper  
installation or repair or improper storage;  
(b) Product whose mechanical serial number or electronic serial  
number has been removed, altered or defaced.  
(c) Damage from exposure to moisture, humidity, excessive  
temperatures or extreme environmental conditions;  
(d) Damage resulting from connection to, or use of any accessory or  
other product not approved or authorized by the Company;  
(e) Defects in appearance, cosmetic, decorative or structural items such  
as framing and non-operative parts;  
UTStarcom Personal Communications  
555 Wireless Blvd., Hauppauge, New York 11788, 800-229-1235  
16808 Marquardt Avenue, Cerritos, California 90703, 562-802-5100  
UTStarcom Canada Company  
(f) Product damaged from external causes such as fire, flooding, dirt,  
sand, weather conditions, battery leakage, blown fuse, theft or  
improper usage of any electrical source.  
5535 Eglinton Avenue West, Suite 234, Toronto,  
Ontario M9C 5K5, 800-465-9672  
The Company disclaims liability for removal or reinstallation of the  
product, for geographic coverage, for inadequate signal reception by  
the antenna or for communications range or operation of the cellular  
system as a whole.  
When sending your wireless device to UTStarcom Personal  
Communications for repair or service, please note that any personal  
data or software stored on the device may be inadvertently erased or  
altered. Therefore, we strongly recommend you make a back up copy  
of all data and software contained on your device before submitting it  
for repair or service. This includes all contact lists, downloads (i.e. third-  
party software applications, ringtones, games and graphics) and any  
other data added to your device. In addition, if your wireless device  
utilizes a SIM or Multimedia card, please remove the card before  
submitting the device and store for later use when your device is  
returned, UTStarcom Personal Communications is not responsible for  
and does not guarantee restoration of any third-party software,  
C
H
C
H
8
8
146  
147  
12 MONTH LIMITED WARRANTY  
personal information or memory data contained in, stored on, or  
integrated with any wireless device, whether under warranty or not,  
returned to UTStarcom Personal Communications for repair or service.  
To obtain repairs or replacement within the terms of this Warranty, the  
product should be delivered with proof of Warranty coverage (e.g.  
dated bill of sale), the consumer’s return address, daytime phone  
number and/or fax number and complete description of the problem,  
transportation prepaid, to the Company at the address shown below or  
to the place of purchase for repair or replacement processing. In  
addition, for reference to an authorized Warranty station in your area,  
you may telephone in the United States (800) 229-1235, and in Canada  
(800) 465-9672 (in Ontario call 905-712-9299).  
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS  
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT  
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S  
LAIBILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER  
FOR THE PRODUCT.  
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY  
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,  
SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN  
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY MUST  
BE BROUGHT WITHIN A PERIOD OF 18 MONTHS FROM DATE OF  
ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE  
LIABLE FOR AN SPECIAL CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,  
EXPRESS OR IMPLIED, WHATSOEVER. THE COMPANY SHALL NOT  
BE LIABLE FOR THE DELAY IN RENDERING SERVICE UNDER THIS  
WARRANTY OR LOSS OF USE DURING THE TIME THE PRODUCT IS  
BEING REPAIRED OR REPLACED.  
No person or representative is authorized to assume for the Company  
any liability other than expressed herein in connection with the sale of  
this product.  
Some states or provinces do not allow limitations on how long an  
implied warranty lasts or the exclusion or limitation of incidental or  
consequential damage so the above limitation or exclusions may not  
apply to you. This Warranty gives you specific legal rights, and you  
may also have other rights which vary from state to state or province to  
province.  
IN USA : UTStarcom Personal Communications  
555 Wireless Blvd.  
Hauppauge, NY 11788  
(800) 229-1235  
IN CANADA : UTStarcom Canada Company  
5535 Eglinton Avenue West  
Suite# 234  
C
H
Toronto, ON M9C 5K5  
8
148  

Venturer IP873 User Manual
Tripp Lite U238 000 1 User Manual
Sony 256EV User Manual
Seagate ST3541A User Manual (1)
Seagate BARRACUDA 720011 SERIAL ATA ST3640330AS User Manual
SanDisk SDUFD2AK 4096 User Manual
Samsung SCH n330 Series User Manual
Radio Shack PLCD39 User Manual
Pioneer BARCODE CLD V2600 User Manual
Philips AS450 User Manual