Onkyo C 707CHX User Manual

English  
Compact Disc Changer  
C-707CHX  
Instruction Manual  
COMPACT DISC CHANGER  
DUAL OPTICAL OUTPUT  
DISC  
DISC  
DISC  
1
2
3
3
DISC CHANGER  
STANDBY/ON  
STANDBY  
DISC MODE  
DISPLAY  
DISC  
C-707CHX  
Important Safeguards  
10. Power Sources The appliance should be  
1. Read Instructions All the safety and  
operating instructions should be read before  
the appliance is operated.  
connected to a power supply only of the type  
described in the operating instructions or as  
marked on the appliance.  
2. Retain Instructions The safety and  
operating instructions should be retained for  
future reference.  
11. Polarization If the appliance is provided with a  
polarized plug having one blade wider than the  
other, please read the following information:  
The polarization of the plug is a safety feature.  
The polarized plug will only fit the outlet one  
way. If the plug does not fit fully into the outlet,  
try reversing it. If there is still trouble, the user  
should seek the services of a qualified electrician.  
Under no circumstances should the user attempt  
to defeat the polarization of the plug.  
3. Heed Warnings All warnings on the  
appliance and in the operating instructions  
should be adhered to.  
4. Follow Instructions All operating and use  
instructions should be followed.  
5. Water and Moisture The appliance should  
not be used near water for example, near a  
bathtub, washbowl, kitchen sink, laundry tub,  
in a wet basement, or near a swimming pool,  
and the like.  
12. Power-Cord Protection Power-supply  
cords should be routed so that they are not  
likely to be walked on or pinched by items  
placed upon or against them, especially near  
plugs, convenience receptacles, and the point  
where they exit from the appliance.  
6. Carts and Stands The appliance should be  
used only with a cart or stand that is  
recommended by the manufacturer.  
6A. An appliance and cart  
13. Cleaning The appliance should be cleaned  
PORTABLE CART WARNING  
combination should be  
moved with care. Quick  
stops, excessive force, and  
uneven surfaces may cause  
the appliance and cart  
only as recommended by the manufacturer.  
14. Nonuse Periods The power cord of the  
appliance should be unplugged from the outlet  
when left unused for a long period of time.  
15. Object and Liquid Entry Care should be taken  
sothatobjectsdonotfallandliquidsarenotspilled  
into the enclosure through openings.  
S3125A  
combination to overturn.  
7. Wall or Ceiling Mounting The appliance  
should be mounted to a wall or ceiling only  
as recommended by the manufacturer.  
16. Damage Requiring Service The appliance  
should be serviced by qualified service  
personnel when:  
8. Ventilation The appliance should be  
situated so that its location or position does  
not interfere with its proper ventilation. For  
example, the appliance should not be situated  
on a bed, sofa, rug, or similar surface that  
may block the ventilation openings; or if  
placed in a built-in installation, such as a  
bookcase or cabinet that may impede the flow  
of air through the ventilation openings, there  
should be free space of at least 5 cm (2 in.)  
and an opening behind the appliance.  
A. The power-supply cord or the plug has  
been damaged; or  
B. Objects have fallen, or liquid has been  
spilled into the appliance; or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate  
normally or exhibits a marked change in  
performance; or  
E. The appliance has been dropped, or the  
enclosure damaged.  
9. Heat The appliance should be situated away  
from heat sources such as radiators, heat  
registers, stoves, or other appliances (including  
amplifiers) that produce heat.  
17. Servicing The user should not attempt to  
service the appliance beyond that described in  
the operating instructions. All other servicing  
should be referred to qualified service personnel.  
3
Precautions  
1. Warranty Claim  
5. Care  
You can find the serial number on the rear panel From time to time you should wipe the front and  
of this unit. In case of warranty claim, please re- rear panels and the cabinet with a soft cloth. For  
port this number.  
heavier dirt, dampen a soft cloth in a weak solu-  
tion of mild detergent and water, wring it out dry,  
and wipe off the dirt. Following this, dry immedi-  
ately with a clean cloth.  
Do not use rough material, thinners, alcohol or  
other chemical solvents or cloths since these could  
damage the finish or remove the panel lettering.  
2. Power  
WARNING  
BEFORE PLUGGING IN THE UNIT FOR THE FIRST  
TIME, READ THE FOLLOWING SECTION CARE-  
FULLY.  
The voltage of the available power supply differs  
according to country or region. Be sure that the  
power supply voltage of the area where this unit  
will be used meets the required voltage (e.g., AC  
230 V, 50 Hz or AC 120 V, 60 Hz) written on the  
rear panel.  
Turning off the standby button does not shut off  
the power completely. So the power cord should  
be removed from the AC outlet when the unit is  
not used for a prolonged time.  
6. Points to remember  
If this unit is brought from a cold environment to  
a warm one or is in a cold room that is quickly  
heated, condensation may form on the pickup,  
preventing proper operation. In this case, remove  
the disc and leave the power ON for about one  
hour to remove the condensation.  
When transporting this unit, be careful not to  
bump it.  
3. Do not touch this unit with wet hands  
Do not handle this unit or power cord when your  
hands are wet or damp. If water or any other liq-  
uid enters the case, take this unit to an authorized  
service center for inspection.  
DANGER:  
INVISIBLE LASER RADIATION WHEN OPEN AND  
INTERLOCK FAILED OR DEFEATED. AVOID DIRECT  
EXPOSURE TO BEAM.  
CAUTION:  
4. Location of this unit  
THIS PRODUCT UTILIZES A LASER. USE OF CON-  
TROLS OR ADJUSTMENTS OR PERFORMANCE OF  
PROCEDURES OTHER THAN THOSE SPECIFIED  
HEREIN MAY RESULT IN HAZARDOUS RADIATION  
EXPOSURE.  
Place this unit in a well-ventilated location.  
Take special care to provide plenty of ventilation  
on all sides of this unit especially when it is placed  
in an audio rack. If ventilation is blocked, this unit  
may overheat and malfunction.  
Do not expose this unit to direct sunlight or heat-  
ing units as this units internal temperature may  
rise and shorten the life of the pickup.  
Avoid damp and dusty places and places directly  
affected by vibrations from the speakers. In par-  
ticular, avoid placing the unit on or above one of  
the speakers.  
Be sure this unit is placed in a horizontal position.  
Never place it on its side or on a slanted surface as  
it may malfunction.  
Do not place near tuners or TV sets.  
If placed next to a TV or tuner, it may cause recep-  
tion interference resulting in some noise in the TV  
or tuner output.  
4
For U.S. model  
FCC INFORMATION FOR USER  
The laser is covered by a housing which prevents  
exposure during operation or maintenance. How-  
ever, this product is classified as a Laser Product  
by CDRH (Center for Devices and Radiological  
Health) which is a department of the Food and  
Drug Administration. According to their regula-  
tions 21 CFR section 1002.30, all manufactures  
who sell Laser Products must maintain records of  
written communications between the manufac-  
turer, dealers and customers concerning radiation  
safety. If you have any complaints about instruc-  
tions or explanations affecting the use of this prod-  
uct, please feel free to write to the address on the  
back page of this manual. When you write us,  
please include the model number and serial num-  
ber of your unit.  
CAUTION:  
The user changes or modifications not expressly  
approved by the party responsible for compliance  
could void the users authority to operate the  
equipment.  
NOTE:  
This equipment has been tested and found to com-  
ply with the limits for a Class B digital device, pur-  
suant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation.  
This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and  
used in accordance with the instructions, may  
cause harmful interference to radio communica-  
tions. However, there is no guarantee that inter-  
ference will not occur in a particular installation. If  
this equipment does cause harmful interference  
to radio or television reception, which can be de-  
termined by turning the equipment off and on,  
the user is encouraged to try to correct the inter-  
ference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the  
In compliance with Federal Regulations, the certi-  
fication, identification and the period of manu-  
facture are indicated on the rear panel.  
equipment and receiver.  
Connect the equipment into an outlet on a  
circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
5
Precautions  
For Canadian model  
For British model  
Replacement and mounting of an AC plug on the  
power supply cord of this unit should be performed  
only by qualified service personnel.  
NOTE:  
THIS CLASS B DIGITAL APPARATUS COMPLIES  
WITH CANADIAN ICES-003.  
IMPORTANT  
The wires in the mains lead are coloured in accor-  
dance with the following code:  
For models having a power cord with a polarized  
plug:  
CAUTION: TO PREVENT ELECTRIC SHOCK,  
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,  
FULLY INSERT.  
Blue  
: Neutral  
Brown : Live  
As the colours of the wires in the mains lead of  
this apparatus may not correspond with the  
coloured markings identifying the terminals in your  
plug, proceed as follows:  
The wire which is coloured blue must be connected  
to the terminal which is marked with the letter N  
or coloured black.  
Modele pour les Canadien  
REMARQUE:  
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST  
CONFORME À LA NORME NMB-003 DU CANADA.  
Sur les modèles dont la fiche est polarisée:  
The wire which is coloured brown must be con-  
nected to the terminal which is marked with the  
letter L or coloured red.  
ATTENTION: POUR ÉVITER LES CHOCS  
ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS  
LARGE DE LA FICHE DANS LA BORNE  
CORRESPONDANTE DE LA PRISE ET POUSSER IMPORTANT  
JUSQUAU FOND.  
A 5 ampere fuse is fitted in this plug. Should the  
fuse need to be replaced, please ensure that the  
replacement fuse has a rating of 5 amperes and  
that it is approved by ASTA or BSI to BS1362. Check  
for the ASTA mark or the BSI mark on the body of  
the fuse.  
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR  
THE SOCKET OUTLET IN YOUR HOME, THEN THE  
FUSE SHOULD BE REMOVED AND THE PLUG CUT  
OFF AND DISPOSED OF SAFELY. THERE IS A DAN-  
GER OF SEVERE ELECTRICAL SHOCK IF THE CUT  
OFF PLUG IS INSERTED INTO ANY 13 AMPERE  
SOCKET.  
For European model  
This unit contains a semiconductor laser system  
and is classified as a CLASS 1 LASER PRODUCT.  
So, to use this model properly, read this Instruc-  
tion Manual carefully. In case of any trouble, please  
contact the store where you purchased the unit.  
To prevent being exposed to the laser beam, do  
not try to open the enclosure.  
“CLASS 1 LASER  
PRODUCT”  
If in any doubt, please consult a qualified electri-  
cian.  
1. This unit is a CLASS 1 LASER PRODUCT and  
employs a laser inside the cabinet.  
2. To prevent the laser from being exposed, do  
not remove the cover. Refer servicing to  
qualified personnel.  
Declaration of Conformity  
We,  
ONKYO EUROPE  
ELECTRONICS GmbH  
INDUSTRIESTRASSE 20  
82110 GERMERING,  
GERMANY  
declare in own responsibility, that the ONKYO product described  
in this instruction manual is in compliance with the corresponding  
technical standards such as EN60065, EN55013, EN55020 and  
EN61000-3-2, -3-3.  
GERMERING, GERMANY  
A.HORIUCHI  
ONKYO EUROPE ELECTRONICS GmbH  
6
Table of contents  
Before Using  
Checking the supplied accessories ............................................... Below  
Connections  
Connecting to Onkyo Separate Collection series components............. 8  
Connecting to the other components........................................... 9~11  
Operations  
Playing CDs ................................................................................ 12~17  
Memory play .............................................................................. 18~20  
Other play modes....................................................................... 21~22  
Other Information  
Handling CDs................................................................................... 23  
Troubleshooting ............................................................................... 24  
Specifications ................................................................................... 25  
Indexed to parts and controls ..................................................... 26~27  
Supplied accessories  
Check that the following accessories are supplied with this unit.  
remote control cable × 1  
Audio connection cable × 1  
7
Connecting to Onkyo Separate Collection series components  
This section introduces you to the other Onkyo Separate Collection series components and their conve-  
nient system functions, followed by instruction on how to connect the system.  
The following Onkyo Separate Collection series components are commercially available:  
R-805X ....... FM Stereo/AM Tuner Amplifier  
A-905X ....... Integrated Stereo Amplifier  
T-405X ........ Stereo Tuner  
K-505X ....... Stereo Cassette Tape Deck (Not available in U.S and Canada)  
MD-105X ... Minidisc (MD) Recorder (Not available in U.S and Canada)  
CDR-205X .. CD Recorder (Not available in U.S and Canada)  
Note that the available components may vary according to the area.  
Combining the C-707CHX Compact Disc Changer with the above system components enables you to  
operate the following convenient functions:  
The instructions in this manual are based on using the C-707CHX along with the R-805X. If you wish to  
use the A-905X, refer to the instruction manual for the A-905X and connect the C-707CH or C-705X  
(instead of the C-707CHX).  
Auto Power On  
You can turn on the power to the tuner amplifier by presssing the STNADBY/ON button on one of  
the system components.  
To enable the Auto Power On function, make sure that all devices are connected correctly.  
Direct Change  
The R-805Xs INPUT SELECTOR automatically switches to CD, MD or TAPE when these components  
are played.  
Remote Control Operation  
This component can be operated using the remote controller included with the R-805X. The buttons  
on the remote controller can be used to send signals to this unit. (Refer to the R-805Xs instruction  
manual for details.)  
Program Timer  
You can use the Timer Play. (Refer to the R-805X instruction manual for details.)  
Sleep Timer  
You can fall asleep to a music/radio program with the timer. (Refer to the R-805X instruction manual  
for details.)  
CD Synchro Recording  
With the cassette deck, MD recorder or CD recorder in recording standby, starting CD playback  
causes the cassette deck or MD recorder to start recording. (Refer to the K-505X, MD-105X and  
CDR-205X instruction manuals for details.)  
CD Dubbing  
Simple CD dubbing using a stereo cassette tape deck, MD recorder or CD recorder is possible with  
the pressing of a single button. (Refer to the K-505X, MD-105X or CDR-205X Instruction Manual for  
more information).  
DLA LINK  
The Peak Search Data function of the C-707CHX enables the MD recorder or CD recorder to auto-  
matically set the digital recording level. (Refer to the MD-105X or CDR-205X Instruction Manual for  
details.)  
8
Connecting to the other components  
Before connecting  
Do not connect the AC power cord (mains lead) until you complete all the other connections includ-  
ing the  
connections on the next page.  
On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a  
white connector (marked L) to the left channel. Connect white plugs of audio connection cables to  
L connectors and connect red plugs of audio connection cables to R connectors.  
Audio connection cable  
To L connector  
To R connector  
(White)  
(Red)  
(White)  
(Red)  
To L connector  
To R connector  
Improper connection  
cable  
REMOTE  
CONTROL  
Insert completely  
COMPACT DISC CHANR  
MODEL NO. C-70HX  
DIGITAL OUTPUT  
OPTICAL  
AC OUTLET  
AC 120V 60Hz  
UNSWITCHED  
120W 1A MAX.  
RATING:  
AC120V 60Hz 14W  
1
2
2-1, NISSHIN-CHO, NEYAGAWA-SHI,OSAKA,  
JAPAN  
MADE IN JAPAN  
ANALOG  
OUTPUT  
3
To wall outlet  
AC outlet  
Audio  
connection  
cable  
L
R
DIGITAL IN  
jacks  
CD  
Optional Optical fiber  
cable  
Amplifier without digital  
input terminal  
MD recorder, CD recorder,  
DAT deck, etc.  
2
1
1 Connecting to an amplifier  
Connect the CDs OUTPUT jacks and the amplifiers CD input jacks using the audio connection cable.  
Refer to the amplifiers instruction manual for connections.  
2
Connection to digital equipment, such as an MD,CD Recorder or DAT  
Using the DIGITAL OUTPUT connector, you can record on digital audio equipment, such as an MD, CD  
recorder, DAT, etc. For digital recording, connect the equipment to either DIGITAL OUTPUT OPTICAL 1  
or 2 connector using the optical cable (option). These connectors can also be used for connecting an  
amplifier which is equipped with a digital input connector.  
A connector protection cap is attached to the digital output connector. Remove  
this cap to connect the unit to other digital equipment. When you are not using  
the digital output connector, replace this cap.  
3 To AC OUTLET (UNSWITCHED)  
The AC power cord of another component can be connected to this AC OUTLET connector.  
This means that if the C-707CHX is plugged into an AC outlet, AC power is available to this AC OUTLET  
even if the C-707CHX is off.  
Note  
The shape, number, and total capacity of the AC outlets may differ depending on the area where the  
unit is purchased.  
120 V, 60 Hz model: Capacity is 120 W in total.  
9
Connecting to the other components (continued)  
Connecting for remote control (  
)
If your other components are made by ONKYO and those components are equipped with the  
connec-  
tors, you can control this unit with the amplifiers remote controller.  
Before connecting  
The amplifier must be connected in the  
system hookups for  
control operations.  
Each component has two connectors. There is no difference between those connectors.  
The components may be connected in any order.  
Remote control operation is not possible if only the  
remote control cable is connected to the  
connectors. Connect the audio connection cables correctly.  
R-805X  
Supplied  
cable  
C-707CHX  
Note  
An  
plug is included with this unit and with every tuner and cassette deck that bears the  
remote control cable equipped with a 1/8 in.(3.5mm) diameter miniature two-conductor phone  
mark.  
10  
Connecting the power cord  
(mains lead)  
Using the remote controller  
The unit is not shipped with a remote controller.  
However, you can use a remote controller (RC-  
414S/RC-456S) that is shipped with the R-805X  
amplifier.  
Insert the AC power cord (mains lead)  
into a wall outlet. The STANDBY indi-  
cator lights.  
Remote controller RC-414S/RC-456S  
When the remote controller RC-414S/RC-456S  
supplied with the amplifier R-805X is used, oper-  
ate the remote controller pointing towards the  
amplifiers remote sensor.  
Be sure to make the  
the connection is incomplete, you cannot use the  
remote controller to operate the unit.  
connection securely. If  
STANDBY/ON  
STANDBY  
R-805X  
Remote control  
sensor  
If you press the OPEN/CLOSE button while  
the unit is in the standby mode, the power  
will turn on and the display will light up auto-  
matically.  
30¡  
30¡  
5m  
C-707CHX  
RC-414S / RC-456S  
To use the unit with the other Onkyo Sepa-  
rate Collection series components, follow the  
connection diagram in the R-805X instruction  
manual to connect the unit to the system.  
The RC-414S remote controller is shown in  
the following illustrations.  
Notes  
Place the unit away from strong light such as  
direct sunlight or inverted fluorescent light which  
can prevent proper operation of the remote con-  
troller.  
Using another remote controller of the same  
type in the same room or using the unit near  
equipment which uses infrared rays may cause  
operational interference.  
Do not put any object such as a book on the  
remote controller. The buttons of the remote  
controller may be pressed by mistake and drain  
the batteries.  
Make sure the audio rack doors do not have  
colored glass. Placing the unit behind such doors  
may prevent proper remote controller operation.  
If there is any obstacle between the remote con-  
troller and the remote control sensor, the re-  
mote controller will not operate.  
11  
Playing CDs  
G.EQUALIZER  
POWER  
CLOCK  
SLEEP  
EFFECT  
MODE  
TUNER  
PRESET  
FM  
AM  
INPUT  
RC-414S  
(Supplied with R-805X)  
TAPE  
STANDBY/ON  
Disc tray  
DVD  
MD  
PAUSE/STEP  
COMPACT CD CHANGER  
DUAL OPTICAL OUTPUT  
REPEAT SCROLL  
PLAY MODE CLEAR  
REPEAT RANDOM  
MEMORY CLEAR  
REPEAT PLAY MODE  
DISC  
DISC  
DISC  
1
2
3
REC  
CD  
3
DISC CHANGER  
DISC  
CDR  
STANDBY/ON  
DISC MODE  
TONE  
CLEAR  
REC  
2
STANDBY  
DISPLAY  
DISC  
TIMER  
1
4
3
6
MUTING  
C-707CHX  
5
UP/DOWN  
ENTER  
7
8
9
VOLUME  
ACOUSTIC  
10/0 PRESENCE  
--/---  
OFF  
1
2
3
Normal play  
3
4
Place the disc in the disc tray,  
with its label face up.  
Label side up  
1
Press the STANDBY/ON button to  
turn on the unit.  
The STANDBY indicator goes out.  
STANDBY/ON  
Place only one disc on each tray.  
STANDBY  
Press the  
OPEN/CLOSE button  
(DISC 1 - DISC 3) to close the  
open disc tray.  
2
Press the desired  
button (DISC 1 - DISC 3).  
OPEN/CLOSE  
Alternatively, you may lightly press the  
front face of the open disc tray.  
The disc tray corresponding to the OPEN/  
CLOSE button opens and the disc indicator  
for the open disc tray flashes (see page 15).  
DISC 1  
DISC 2  
DISC 3  
DISC 1  
DISC 2  
DISC 3  
Note:  
You can continuously load second and  
third discs in the disc trays by pressing the  
buttons (DISC 1 - DISC 3).  
Note:  
If one of the  
OPEN/CLOSE buttons (DISC 1 -  
DISC 3) is pressed in STANDBY mode, the unit  
turns on automatically and then the  
corresponding disc tray opens.  
12  
G.EQUALIZER  
POWER  
CLOCK  
SLEEP  
EFFECT  
MODE  
RC-414S  
TUNER  
PRESET  
FM  
AM  
INPUT  
TAPE  
(Supplied with R-805X)  
DVD  
MD  
COMPACT CD CHANGER  
DUAL OPTICAL OUTPUT  
PAUSE/STEP  
DISC  
DISC  
DISC  
1
2
3
REPEAT SCROLL  
PLAY MODE CLEAR  
REPEAT RANDOM  
MEMORY CLEAR  
REPEAT PLAY MODE  
REC  
CD  
3
DISC CHANGER  
STANDBY/ON  
STANDBY  
DISC  
CDR  
DISC MODE  
DISPLAY  
DISC  
DISC  
TONE  
CLEAR  
REC  
2
C-707CHX  
TIMER  
1
4
3
6
MUTING  
5
DISC  
UP/DOWN  
ENTER  
7
8
9
VOLUME  
ACOUSTIC  
10/0 PRESENCE  
--/---  
OFF  
1
2
3
To pause playing  
5
6
Press the DISC button once or  
more to select the disc you wish  
to play.  
Press the  
remote controller.  
To resume playback, press the  
the unit, or the  
controller.  
button, or the  
button on the  
button on  
button on the remote  
Remote controller  
DISC  
DISC  
Remote controller  
DISC 1  
To stop playing  
Press the button during play.  
Remote controller  
Press the  
button.  
The CD changer starts playing the first  
track of the selected disc.  
Remote controller  
Music Calendar  
DISC  
DISC  
DISC  
1
2
3
The Music Calendar shows the numbers of the  
tracks to be played. When the playback of a  
track is completed, the corresponding track  
number indicator turns off. If the disc contains  
16 or more tracks, the over indicator (>15)”  
lights up. (The total number of the tracks on a  
disc is shown on the multi-display.)  
1
6
2
7
3
8
4
9
5
10  
11 12 13 14 15  
15  
This indicator appears if the  
disc has 16 tracks or more.  
DISC  
DISC  
DISC  
1
2
3
SINGLE ELAPSED  
1
6
2
7
3
8
4
9
5
10  
11 12 13 14 15  
15  
Music Calendar  
DISC  
DISC  
DISC  
1
2
3
1
6
2
7
3
8
4
9
5
10  
11 12 13 14 15  
15  
over indicator  
multi-display  
13  
Playing CDs (continued)  
G.EQUALIZER  
POWER  
CLOCK  
SLEEP  
EFFECT  
MODE  
RC-414S  
TUNER  
PRESET  
FM  
AM  
INPUT  
TAPE  
(Supplied with R-805X)  
COMPACT CD CHANGER  
DUAL OPTICAL OUTPUT  
DVD  
MD  
PAUSE/STEP  
DISC  
DISC  
DISC  
1
2
3
REPEAT SCROLL  
PLAY MODE CLEAR  
REPEAT RANDOM  
MEMORY CLEAR  
REPEAT PLAY MODE  
3
DISC CHANGER  
REC  
CD  
STANDBY/ON  
STANDBY  
DISC MODE  
DISPLAY  
DISC  
CDR  
,
DISC  
TONE  
CLEAR  
REC  
2
C-707CHX  
TIMER  
1
4
3
6
MUTING  
5
UP/DOWN  
ENTER  
7
8
9
,
Number  
buttons  
VOLUME  
ACOUSTIC  
10/0 PRESENCE  
--/---  
OFF  
1
2
3
Skip play  
Starting playback from a given  
track (remote controller only)  
Use the  
or  
button to jump to  
the beginning of the previous or next track,  
respectively. Pressing the button during playback  
causes the CD Changer to play from the  
beginning of that track  
With the RC-414S remote controller (included  
with the R-805X) , you can select the track to  
play using the number buttons. In this case,  
selecting a track automatically starts playback  
from that track.  
Remote controller  
How to enter track numbers  
Remote controller  
To enter track #5  
5
: Press this button during playback to  
jump to the beginning of the current  
track. Press it again to jump to the  
beginning of the previous track.  
: Press this button to jump to the  
beginning of the next track.  
To enter track #10  
10/ 0  
To enter track #21  
2
1
--  
/
---  
Search play  
Hold down the  
or  
button  
during playback. The CD Changer will start  
playback from where you release your finger.  
: fast-rewind  
: fast-forward  
Note:  
During Memory play, searching is performed  
only for those tracks stored in the memory. (See  
pages 18 to 20 for Memory play.)  
14  
Notes:  
Understanding the meaning of  
disc indicators  
This CD Changer has three disc trays that slide  
forward and backward internally. Note that  
pressing any of the buttons will cause the  
all the trays to change position, either in or  
out, or forward or backward.  
Be sure that the internal disc trays have  
stopped moving before changing the disc.  
When removing a disc, be careful not to  
scratch the disc that may exist in the disc tray  
below. This is especially important when  
removing a CD-single.  
DISC 1  
DISC 2  
DISC 3  
Boxed: The disc is playing or ready for playback.  
A disc is loaded in the disc tray.  
Flashing:The disc tray is open.  
On:  
Off:  
No disc is loaded in the disc tray.  
Note:  
The disc indicator stays lit until the presence/  
absence detection is completed, even if the disc  
tray holds no discs.  
Changing the discs during  
playback  
DISC 1  
DISC 1  
DISC 2  
DISC 2  
DISC 3  
DISC 3  
The C-707CHX allows you to change the other  
two discs while one disc is playing.  
When one disc is playing, press the button  
(DISC 1 - DISC 3) for another disc tray.  
The disc indicator for the open disc tray flashes.  
Replace the disc in the disc tray and press the  
button to close the disc tray.  
If the button for the playing disc is  
pressed...  
Playback stops and the tray holding that disc  
opens.  
IMPORTANT!  
During recording, pressing the button for the  
tray holding the playing disc stops the recording.  
15  
Playing CDs (continued)  
COMPACT CD CHANGER  
DUAL OPTICAL OUTPUT  
DISC  
DISC  
DISC  
1
2
3
3
DISC CHANGER  
STANDBY/ON  
STANDBY  
DISC MODE  
DISPLAY  
DISC  
C-707CHX  
DISC MODE  
Selecting the disc mode  
Each time you press the DISC MODE button, the  
disc mode will change in the following  
sequence:  
DISC MODE  
TR-1  
Normal play  
TR-1  
1DISC  
(No indication made)  
(The current disc mode is shown by the disc  
mode indicators.)  
1 DISC  
Off  
TR-1 mode (hit-parade function): When  
loaded with CD-singles, the CD Changer plays  
only the first tracks of discs. The unit  
automatically stops when the first tracks of all  
discs have been played back. This mode is useful  
when you play only the first tracks of one CD-  
single after another.  
1DISC mode: The CD Changer plays only the  
currently selected disc. When finished, the unit  
stops without playing the next CD.  
Normal play (No indication made): When  
finished playing the discs final track, the CD  
Changer immediately starts playing the next  
discs first track. The unit automatically stops  
when all discs have been played back.  
TR-1  
Note:  
In the TR-1 mode, the CD Changer determines  
whether it is a CD-single by the total playing  
time, not the size of the disc. Therefore, even if  
a 12-cm disc is loaded, the unit will recognize it  
as a CD-single if it includes 4 tracks or less and  
its total playing time is less than 27 minutes, and  
play back only the discs first track.  
16  
COMPACT CD CHANGER  
DUAL OPTICAL OUTPUT  
DISC  
DISC  
DISC  
1
2
3
3
DISC CHANGER  
STANDBY/ON  
STANDBY  
DISC MODE  
DISPLAY  
DISC  
C-707CHX  
DISPLAY  
Changing the display  
Note:  
The display changes each time you press the  
DISPLAY button during play.  
In the following cases, the display will show  
--:--:  
An attempt to display the remaining time is  
made when Track 21 or a later track is  
playing.  
DISPLAY  
An attempt to display the remaining time for  
the playing track or disc is made when Track  
21 or a later track is stored in memory.  
An attempt to display the remaining time for  
the playing disc is made during Memory play  
when the total time of the stored tracks in  
memory exceeds 99:59.  
An attempt to display the remaining time for  
the playing track or disc is made when tracks  
of other discs are stored in memory.  
An attempt to display the remaining time for  
the playing disc is made during Random play.  
While the unit is playing or in pause mode:  
Elapsed time for the playing track  
Remaining time for the playing track  
Remaining time for the playing disc  
Track number of the playing track  
While the unit is stopped:  
Total playback time  
Total number of tracks  
17  
Memory play  
G.EQUALIZER  
POWER  
CLOCK  
SLEEP  
EFFECT  
MODE  
RC-414S  
TUNER  
PRESET  
FM  
AM  
INPUT  
TAPE  
(Supplied with R-805X)  
DVD  
MD  
PAUSE/STEP  
REPEAT SCROLL  
PLAY MODE CLEAR  
REPEAT RANDOM  
MEMORY CLEAR  
REPEAT PLAY MODE  
REC  
CD  
DISC  
CDR  
MEMORY  
DISC  
TONE  
CLEAR  
REC  
2
TIMER  
1
4
3
6
MUTING  
5
UP/DOWN  
ENTER  
7
8
9
VOLUME  
ACOUSTIC  
10/0 PRESENCE  
--/---  
OFF  
1
2
3
You can perform Memory playback, Random playback, and Repeat playback using the remote  
controller (RC-414S) that comes with Onkyo R-805X. (You can also control the unit using the system  
remote controller that came with the Onkyo Separate Collection series.)  
Memory play  
You can store your favorite selections from up to 3 discs in the CD Changers internal memory. Up to  
40 selections can be stored.  
A selection here means to select either a single track or all tracks of a disc.  
The memory contents will not be lost even if you turn off the unit with Memory play stopped.  
The following is an example of storing 3 selections in memory:  
Selection 1: Track 3 of Disc 1  
Selection 2: All tracks of Disc 2  
Selection 3: Track 12 of Disc 3  
1
Press the MEMORY button when  
the CD Changer is stopped.  
2
Press the DISC button once or  
more to select “DISC 1”.  
The MEMORY indicator appears.  
You may use the remote controllers DISC  
button .  
MEMORY  
MEMORY  
Remote controller  
DISC  
DISC  
Note:  
Pressing the MEMORY button during play  
causes the playing track to be stored as P-1.  
DISC 1  
If you skip this step, the current disc  
remains selected.  
18  
G.EQUALIZER  
POWER  
CLOCK  
SLEEP  
EFFECT  
MODE  
RC-414S  
TUNER  
PRESET  
FM  
AM  
INPUT  
TAPE  
(Supplied with R-805X)  
DVD  
MD  
PAUSE/STEP  
REPEAT SCROLL  
PLAY MODE CLEAR  
REPEAT RANDOM  
MEMORY CLEAR  
REPEAT PLAY MODE  
REC  
CD  
DISC  
DISC  
CDR  
MEMORY  
,
TONE  
CLEAR  
REC  
2
TIMER  
1
4
3
6
MUTING  
3
5
UP/DOWN  
ENTER  
7
8
9
VOLUME  
ACOUSTIC  
10/0 PRESENCE  
--/---  
OFF  
1
2
3
3
Press the  
or  
5
Press the  
button on the unit or the  
button on the remote  
controller repeatedly to select  
ALon the display. Then, press  
the MEMORY button on the  
remote controller to store all  
tracks of the disc.  
or  
button once or more to select  
Track 3 on the display. Then,  
press the MEMORY button on  
the remote controller to store  
the track.  
or  
The track in memory are played in the  
order you specified.  
Remote controller  
Remote controller  
3
MEMORY  
MEMORY  
Storing tracks using the remote controller  
Simply press the number button 3. Each time  
you press a number button, the corresponding  
track number is stored in memory.  
6
Press the DISC button once or  
more to select DISC 3.  
You may use the remote controllers DISC  
button.  
4
Press the DISC button once or  
more to select DISC 2.  
Remote controller  
DISC  
DISC  
You may use the remote controllers DISC  
button.  
Remote controller  
DISC  
DISC  
DISC 3  
DISC 2  
(Continued to the next page)  
19  
Memory play (continued)  
G.EQUALIZER  
POWER  
CLOCK  
SLEEP  
EFFECT  
MODE  
RC-414S  
TUNER  
PRESET  
FM  
AM  
INPUT  
TAPE  
(Supplied with R-805X)  
DVD  
MD  
PAUSE/STEP  
REPEAT SCROLL  
PLAY MODE CLEAR  
REPEAT RANDOM  
MEMORY CLEAR  
REPEAT PLAY MODE  
REC  
CD  
DISC  
CDR  
CLEAR  
TONE  
CLEAR  
REC  
2
TIMER  
1
4
3
6
MUTING  
5
Number  
buttons  
UP/DOWN  
ENTER  
7
8
9
VOLUME  
ACOUSTIC  
10/0 PRESENCE  
--/---  
OFF  
1
2
3
7
Press the  
or  
8
Press the  
button.  
Remote controller  
button once or more to select  
Track 12 on the display. Then,  
press the MEMORY button on  
the remote controller to store  
the track.  
The CD changer plays the stored tracks  
in the stored order.  
To stop Memory play, press the button.  
You may press the number button 12”  
on the remote controller to store Track 12.  
To return to Normal play:  
Remote controller  
--/---  
Press the MEMORY button to turn off the  
MEMORY indicator. If you press the MEMORY  
button during Memory play, you will return to  
Normal play from the currently playing track.  
To return to Memory play again, first stop  
playback and then press the MEMORY button.  
Note that pressing the MEMORY button without  
stopping playback erases all tracks in the memory  
and stores the playing track as P-1.  
1
Checking the tracks stored in the memory  
While the CD Changer is stopped, press the  
2
or  
button for at least 1 second.  
This displays the disc number, the track number  
and the program number of the first track in the  
memory. To view the second track, press the  
button again for at least 1 second.  
Note:  
If the number of selections stored in the  
memory reaches 40, FULLwill appear  
on the display. In this case, you cannot  
store tracks any more.  
Clearing the stored tracks  
CLEAR  
When Memory play is stopped  
(when the MEMORY indicator is lit),  
press the CLEAR button.  
Pressing this button repeatedly clears the tracks  
you stored one by one in the reverse order (from  
the last track to the first).  
20  
Other play modes  
G.EQUALIZER  
POWER  
CLOCK  
SLEEP  
EFFECT  
MODE  
RC-414S  
TUNER  
PRESET  
FM  
AM  
INPUT  
TAPE  
(Supplied with R-805X)  
DVD  
MD  
COMPACT CD CHANGER  
DUAL OPTICAL OUTPUT  
PAUSE/STEP  
DISC  
DISC  
DISC  
1
2
3
REPEAT SCROLL  
PLAY MODE CLEAR  
REPEAT RANDOM  
MEMORY CLEAR  
REPEAT PLAY MODE  
REC  
CD  
RANDOM  
REPEAT  
3
DISC CHANGER  
STANDBY/ON  
STANDBY  
DISC  
CDR  
DISC MODE  
DISPLAY  
DISC  
TONE  
CLEAR  
REC  
2
C-707CHX  
TIMER  
1
4
3
6
MUTING  
5
UP/DOWN  
ENTER  
7
8
9
VOLUME  
ACOUSTIC  
10/0 PRESENCE  
--/---  
OFF  
1
2
3
Random play  
Repeat play  
You can play all tracks of the disc(s) in random  
order.  
You can repeat playing the tracks of the disc(s).  
1
Press the RANDOM button.  
1
2
Press the REPEAT button.  
The RANDOM indicator appears and the  
CD Changer starts Random play.  
You can enjoy Random play of tracks on  
different discs.  
The REPEAT indicator appears.  
REPEAT  
REPEAT  
RANDOM  
RANDOM  
Press the  
button.  
Remote controller  
Notes:  
During Memory play, pressing the  
RANDOM button starts Random play of  
only the stored tracks.  
During Random play, pressing the  
REPEAT button will start another  
Random play, with a new track order,  
when the current Random play of the  
entire disc is completed.  
Tracks to be repeated vary depending on  
playback mode as shown in the table below.  
Play mode Repeated tracks  
Normal  
Memory  
Random  
All tracks on disc  
Tracks in memory (in stored order)  
Repeats Random play of all tracks  
on disc  
To return to Normal play:  
TR-1  
First tracks of CD-singles (see page16)  
Tracks on selected disc  
Press the RANDOM button again.  
1 DISC  
RANDOM  
To return to Normal play:  
Press the REPEAT button again. The REPEAT  
indicator disappears.  
To cancel the Random playback, press the  
stop button ( ). You can also cancel Random  
playback by pressing the Open/Close button  
of the corresponding disc tray and open the  
tray.  
REPEAT  
21  
Other play modes (continued)  
COMPACT CD CHANGER  
DUAL OPTICAL OUTPUT  
DISC  
DISC  
DISC  
1
2
3
3
DISC CHANGER  
STANDBY/ON  
STANDBY  
DISC MODE  
DISPLAY  
DISC  
C-707CHX  
DISC  
DISC MODE  
Playing the first tracks only  
(TR-1 play)  
3
Press the DISC MODE button once or  
more to display TR-1on the display.  
DISC MODE  
In this mode, you can play the first tracks of  
several CD-singles one after another. You can  
replace non-playing discs while one disc is  
playing. The TR-1 play mode is useful for making  
your own MD, CD-R or tape from your favorite  
CD-singles.  
TR-1  
Each time you press the DISC MODE  
button, the disc mode changes in the  
following sequence:  
Normal play  
(No indication made)  
1
Place discs in all the disc trays.  
TR-1  
1DISC  
DISC 1  
Label side up  
4
5
Press the DISC button once or  
more to select DISC 1.  
DISC 2  
The CD Changer will immediately start  
playing the first track of the first disc.  
DISC  
DISC 3  
Place only one disc on  
each tray.  
To do so, first press the DISC 1 button  
and load the first CD-single.  
Similarly, load the second and the third  
CD-singles using the DISC 2 and DISC 3  
buttons.  
Press the  
button.  
The CD changer starts playing the first  
track of the first disc.  
Remote controller  
2
Press the  
3) for the disc tray in which you  
place the third disc.  
button (DISC 1 - DISC  
Note:  
You can enjoy TR-1 play of four or more discs.  
First press the REPEAT button on the remote  
controller to display the REPEAT indicator and  
start TR-1 play. Then, replace the discs for which  
playback has been finished one after another.  
22  
Handling CDs  
Playable discs  
Taking the CD out of the disc case  
This unit can play back the follwing discs.  
1
Hold the disc case in the palm of  
one hand and pull the cover  
upward with the other hand to  
open the disc case.  
Disc Contents Disc  
Maximum  
mark  
size  
12 cm  
8 cm  
playback  
time  
Approx.  
74minutes  
Approx.  
Audio  
CDs  
Audio  
(CD single) 20 minutes  
You cannot play back discs other than those listed  
above.  
Do not use discs that are not audio discs (eg.CD-  
ROMs for use with personal computers), as these  
could damage the speakers and amplifier.  
2
While pushing on the center grip  
of the disc case with your finger,  
take out the disc by holding its  
edges.  
Avoid using heart-shaped or octagonal discs.  
Playing irregularly shaped discs may damage the  
internal mechanism of the unit.  
Important notes on handling CDs  
Do not use discs on which adhesive from adhesive  
tape or a disc label (if it is a rental disc) remains.  
Otherwise, you may not be able to eject the discs  
or the unit may become inoperative.  
Carefully lift the disc from the disc case,  
making sure to only hold the disc by its edges  
or the hole in the middle.  
A dry, soft cloth may be used to wipe dust  
and fingerprints off the surface of CDs.  
Do not use volatile agents on discs, such as  
thinner or benzine. Also, do not use  
conventional record cleaner or antistatic agents.  
Do not place a CD in direct sunlight or  
locations subject to high humidity or low  
temperature.  
Do not store a CD in the CD changer tray for  
long periods of time.  
23  
Troubleshooting  
If you have any problems with the unit, please check the troubleshooting table below first.  
For any problems not described in the table, please consult your nearest Onkyo authorized service  
center.  
Symptom  
Cause  
Remedy  
STANDBY button is pressed, Power cord plug is not properly  
Insert the plug firmly.  
but power does not come  
on.  
connected to AC outlet.  
(See pages 11.)  
Disc is loaded in the disc  
tray, but playback will not  
begin.  
Disc is in the disc tray upside  
down.  
Load the disc with the label facing  
upward.  
Disc is dirty.  
Clean the disc. (See page 23.)  
Moisture has accumulated inside  
the CD Changer.  
Remove the disc from the disc tray,  
place the CD Changer in a warm  
place and leave the power on for  
about one hour. (See page 4).  
Disc in the disc tray is loaded off- Load the disc properly in the disc  
center.  
tray.  
No sound  
Incomplete or incorrect  
connections.  
Insert all plugs firmly into jacks.  
(See pages 8-9.)  
Disc skipping  
Disc is dirty.  
Clean the disc. (See page 23)  
Disc is scratched.  
Replace the disc.  
CD Changer has been bumped.  
Place the CD Changer in a more  
stable location.  
Search time (when moving  
to a specific track) is  
extremely long.  
Disc is dirty.  
Clean the disc. (See page 23)  
Disc is scratched.  
Replace the disc.  
Track numbers cannot be  
stored in memory.  
No disc in the tray.  
Load a disc into the tray.  
A track number not on the disc is Use only the track numbers on  
being input.  
the disc. (See pages 18-20.)  
Noise during play  
Interference from TV  
Turn off the TV, or move the unit  
farther from the TV.  
Remote control does not  
function.  
Battery level is low.  
Replace the batteries.  
Your position is too far from the  
units remote control sensor or  
out of the sensors detection  
angle.  
Remote control is possible within  
a distance of approximately 5  
meters from the units sensor and  
a detection range of 30°.  
(See pages 11.)  
An obstacle exists between you  
and the units remote control  
sensor.  
Operate from a different position  
or remove the obstacle.  
The unit does not operate.  
A failure occurred in the unit's  
microprocessor.  
Remove the power plug, wait for  
approx. 5 seconds, and then re-  
insert the power plug.  
24  
Specifications  
Signal readout system  
Wow and Flutter  
Below threshold of measurability  
Optical non-contact  
D/A converter  
Output level  
2 volts r.m.s.  
1 bit D/A converter  
Frequency response  
Power supply rating  
5 Hz 20 kHz  
AC 120V, 60 Hz  
Total harmonic distortion  
Power consumption  
0.005% (at 1 kHz)  
14 watts  
Channel separation  
Dimensions (W x H x D)  
205 × 91 × 334 mm  
85 dB(at 1 kHz)  
8-1/16" × 3-9/16" × 13-3/16"  
Dynamic range  
96 dB  
Weight  
3.0 kg, 6.6 lbs.  
Signal to noise ratio  
90 dB  
Specifications and external appearance are  
subject to change without notice because of  
product improvements.  
25  
Index to parts and controls  
For operational instructions, refer to the page indicated in parentheses.  
Front panel  
STANDBY/ON button [11, 12]  
Disc tray [12]  
Open/Close button (  
[12, 14, 22]  
)
COMPACT DISC CHANGER  
DUAL OPTICAL OUTPUT  
DISC 1  
DISC 2  
3 DISC CHANGER  
DISC 3  
Stop button (  
[13]  
Play/Pause button  
)
STANDBY/ON  
STANDBY  
DISC MODE  
DISPLAY  
DISC  
(
)
[13, 20, 22]  
DISC button [13, 18, 19]  
STANDBY  
indicator  
[11, 12]  
Track UP and DOWN buttons  
DISPLAY  
button [17]  
(
)
,
[14, 19, 20]  
DISC MODE  
button [16, 22]  
Display  
Elapsed/Remaining  
time indicator  
Pause  
indicator  
Memory  
indicator  
Disc mode indicator  
-
1
MEMORY  
1 DISC  
TR  
SINGLE ELAPSED  
TOTAL REMAIN  
REPEAT  
DISC 1  
DISC 2  
DISC 3  
1
6
2
7
3
8
4
9
5
10  
11 12 13 14 15  
15  
RANDOM  
Disc  
RANDOM  
Music calendar  
Multi-purpose display  
Over indicator  
indicators indicator  
(Appears when the disc  
contains more than  
15 tracks.)  
REPEAT indicator  
26  
Remote controller  
Remote controller included with the R-805X (RC-414S).  
To operate the included remote controller, make the appropriate connection to the  
connection.  
remote  
You can also control the unit using the system remote controller that came with the Onkyo Separate  
Collection series.  
RC-414S (supplied with R-805X)  
G.EQUALIZER  
POWER  
CLOCK  
SLEEP  
EFFECT  
MODE  
TUNER  
PRESET  
FM  
AM  
INPUT  
TAPE  
DVD  
MD  
PAUSE/STEP  
REPEAT SCROLL  
PLAY MODE CLEAR  
REPEAT RANDOM  
MEMORY CLEAR  
REPEAT PLAY MODE  
REC  
CD  
CD operation buttons  
REPEAT : Repeat mode button  
RANDOM : Random play button  
: Stop button  
: Pause button  
: Play button  
MEMORY : Memory button  
CLEAR : Clear button  
DISC : Disc button  
DISC  
CDR  
TONE  
CLEAR  
REC  
2
TIMER  
1
4
3
6
MUTING  
Number buttons  
[14, 19, 20]  
5
Used to select tracks  
when the R-805X  
amplifier’s input  
selector is in ”CD”  
position.  
UP/DOWN  
ENTER  
7
8
9
VOLUME  
ACOUSTIC  
: Track down button  
: Track up button  
--/---  
10/0 PRESENCE  
OFF  
1
2
3
REMOTE CONTROLLER RC-414S by  
27  
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN  
Tel: 072-831-8111 Fax: 072-833-5222  
ONKYO U.S.A. CORPORATION  
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.  
Tel: 201-785-2600 Fax: 201-785-2650 E-mail: [email protected]  
ONKYO EUROPE ELECTRONICS GmbH  
Industriestrasse 20, 82110 Germering, GERMANY  
Tel: 089-849-320 Fax: 089-849-3265 E-mail: [email protected]  
ONKYO CHINA LIMITED  
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,  
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039  
HOMEPAGE  
Printed in Japan  
E
SN 29342876A  
I0104-2  

Transcend Information StoreJet TS160GSJ25M User Manual
Sony CDX R6750 User Manual
Seagate BARRACUDA ST3500641ASRK User Manual
Samsung GT B7610 User Manual
Salton MECM1CAN User Manual
Roberts Radio CD9949 User Manual
Philips AZ1226 User Manual
Philips AX5115 User Manual
Philips AJ 3470 User Manual
Oregon Scientific BARM839 User Manual