Nokia N93 User Manual

Nokia N93 User guide  
9245183  
ISSUE 2 EN  
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE  
PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE  
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER  
ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY  
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT  
LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY  
THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.  
Issue 2 EN, 9245183  
Contents  
For your safety...........................................7 Camera......................................................23  
Record videos.......................................................................23  
Take pictures ........................................................................25  
Get connected..........................................10  
Your Nokia N93.......................................11  
Gallery.......................................................30  
Modes..................................................................................... 11  
View images and video clips............................................31  
Shortcuts...............................................................................13  
Edit video clips.....................................................................31  
Settings.................................................................................. 14  
Edit images ...........................................................................33  
Transfer content from another device.......................... 14  
Slide show.............................................................................33  
Essential indicators.............................................................15  
TV out mode .........................................................................34  
Keypad lock (keyguard) ..................................................... 16  
Presentations........................................................................34  
Volume and loudspeaker control.................................... 16  
Albums ...................................................................................35  
Clock....................................................................................... 16  
Print online ...........................................................................35  
Headset.................................................................................. 17  
Online sharing......................................................................36  
Wrist and lens cover straps.............................................. 17  
Wireless LAN ........................................................................ 17  
Media applications..................................39  
Home network ..................................................................... 19  
Web browser ........................................................................ 19  
Memory card........................................................................ 20  
File manager......................................................................... 21  
Help......................................................................................... 22  
Tutorial................................................................................... 22  
Music player.........................................................................39  
Image print ...........................................................................42  
Back up files.........................................................................43  
Messaging.................................................44  
Write text..............................................................................45  
Write and send messages.................................................47  
Inbox—receive messages...................................................49  
Mailbox...................................................................................50  
View messages on a SIM card .........................................52  
Messaging settings .............................................................52  
Calendar....................................................74  
Create calendar entries .....................................................74  
Meeting requests.................................................................74  
Calendar views.....................................................................75  
Manage your calendar entries.........................................75  
Calendar settings ................................................................75  
Make calls ............................................... 57  
Voice calls..............................................................................57  
Video calls..............................................................................59  
Video sharing........................................................................60  
Answer or reject a call.......................................................63  
Log...........................................................................................64  
My own.....................................................76  
Visual Radio .........................................................................76  
RealPlayer..............................................................................78  
Flash Player...........................................................................80  
Movie director......................................................................81  
Games.....................................................................................82  
Contacts (phonebook)............................ 67  
Save names and numbers .................................................67  
Copy contacts.......................................................................68  
Add ringing tones for contacts........................................69  
Create contact groups........................................................69  
Connectivity.............................................83  
PC connections ....................................................................83  
Data cable.............................................................................83  
Bluetooth connectivity......................................................83  
Infrared connection............................................................87  
Home network......................................................................88  
Synchronization...................................................................91  
Connection manager..........................................................91  
Device manager...................................................................92  
Modem ..................................................................................93  
Services.................................................... 70  
Web access point.................................................................70  
Bookmarks view...................................................................70  
Connection security............................................................71  
Browse....................................................................................71  
Download and purchase items ........................................72  
End a connection.................................................................72  
Web settings.........................................................................73  
Office........................................................94  
Recorder................................................................................. 94 TV configuration................................................................114  
Converter............................................................................... 94 Voice commands ...............................................................114  
Calculator.............................................................................. 94 Application manager........................................................114  
Notes ...................................................................................... 95 Activation keys for copyright-protected files...........117  
Zip manager.......................................................................... 95  
Troubleshooting.................................... 118  
Q&A.......................................................................................118  
Quickoffice............................................................................ 95  
Adobe reader........................................................................ 97  
Barcode reader..................................................................... 98  
Battery information ............................. 122  
Charging and discharging...............................................122  
Personalize your device........................ 100  
Profiles—set tones.............................................................100  
Nokia battery authentication guidelines ...................122  
Change the look of your device....................................101  
Active standby mode........................................................102  
Care and maintenance......................... 125  
Additional safety information............. 126  
Tools....................................................... 103  
Multimedia key..................................................................103  
Settings................................................................................103  
Index...................................................... 129  
For your safety  
Read these simple guidelines. Not following them may be  
dangerous or illegal. Read the complete user guide for  
further information.  
SWITCH OFF WHEN REFUELING Do not use  
the device at a refueling point. Do not use near  
fuel or chemicals.  
SWITCH ON SAFELY Do not switch the device  
on when wireless phone use is prohibited or  
when it may cause interference or danger.  
SWITCH OFF NEAR BLASTING Follow any  
restrictions. Do not use the device where  
blasting is in progress.  
ROAD SAFETY COMES FIRST Obey all local  
laws. Always keep your hands free to operate  
the vehicle while driving. Your first  
consideration while driving should be road  
safety.  
USE SENSIBLY Use only in the normal  
position as explained in the product  
documentation. Do not touch the antenna  
unnecessarily.  
QUALIFIED SERVICE Only qualifiedpersonnel  
may install or repair this product.  
INTERFERENCE All wireless devices may be  
susceptible to interference, which could affect  
performance.  
ENHANCEMENTS AND BATTERIES Use only  
approved enhancements and batteries. Do not  
connect incompatible products.  
SWITCH OFF IN HOSPITALS Follow any  
restrictions. Switch the device off near medical  
equipment.  
WATER-RESISTANCE Your device is not  
water-resistant. Keep it dry.  
SWITCH OFF IN AIRCRAFT Follow any  
restrictions. Wireless devices can cause  
interference in aircraft.  
BACK-UP COPIES Remember to make  
back-up copies or keep a written record of all  
important information stored in your device.  
7
 
CONNECTING TO OTHER DEVICES When  
connecting to any other device, read its user  
guide for detailed safety instructions. Do not  
connect incompatible products.  
Your device supports internet connections and other  
methods of connectivity. Like computers, your device may  
be exposed to viruses, malicious messages and  
applications, and other harmful content. Exercise caution  
and open messages, accept connectivity requests,  
download content, and accept installations only from  
trustworthy sources. To increase the security of your  
device, consider installing antivirus software with a regular  
update service and using a firewall application.  
EMERGENCY CALLS Ensure the phone  
function of the device is switched on and in  
service. The keypad is active only in the  
fold-open mode. Press the end key as many  
times as needed to clear the display and return  
to the standby mode. Enter the emergency  
number, then press the call key. Give your  
location. Do not end the call until given  
permission to do so.  
Warning: To use any features in this device, other  
than the alarm clock, the device must be switched on.  
Do not switch the device on when wireless device use  
may cause interference or danger.  
This device supports common features of Microsoft Word,  
PowerPoint, and Excel (Microsoft Office 97, 2000, XP, and  
2003). Not all file formats can be viewed or modified.  
About your device  
The wireless device described in this guide is approved for  
use on the EGSM 900, 1800, 1900, and UMTS 2100  
networks. Contact your service provider for more  
information about networks.  
During operation, such as an active video sharing session  
or high-speed data connection, the device may feel warm.  
In most cases, this condition is normal. If you suspect the  
device is not working properly, take it to the nearest  
authorized service facility.  
When using the features in this device, obey all laws and  
respect local customs, privacy and legitimate rights of  
others, including copyrights.  
Your device may have some bookmarks or links preinstalled  
for or may allow access to sites provided by third parties  
not affiliated with Nokia. Nokia does not endorse or  
assume any liability for these sites. If you choose to access  
Copyright protections may prevent some images, music  
(including ringing tones), and other content from being  
copied, modified, transferred, or forwarded.  
8
them, you should take the same precautions, for security or  
content, as you would with any internet site.  
For availability and information on using SIM card  
services, contact your SIM card vendor. This may be the  
service provider or other vendor.  
Network services  
Enhancements, batteries, and  
chargers  
Always switch the device off and disconnect the charger  
before removing the battery.  
To use the phone you must have service from a wireless  
service provider. Many of the features require special  
network features. These features are not be available on all  
networks; other networks may require that you make  
specific arrangements with your service provider before  
you can use the network services. Your service provider can  
give you instructions and explain what charges will apply.  
Some networks may have limitations that affect how you  
can use network services. For instance, some networks may  
not support all language-dependent characters and  
services.  
Check the model number of any charger before use with  
this device. This device is intended for use when supplied  
with power from a DC-4, AC-3, or AC-4 charger, and from  
an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or  
LCH-12 charger when used with the CA-44 charger  
adapter.  
Your service provider may have requested that certain  
features be disabled or not activated in your device. If so,  
these features will not appear on your device menu. Your  
device may also have a special configuration such as  
changes in menu names, menu order, and icons. Contact  
your service provider for more information.  
The battery intended for use with this device is BP-6M.  
Warning: Use only batteries, chargers, and  
enhancements approved by Nokia for use with this  
particular model. The use of any other types may  
invalidate any approval or warranty, and may be  
dangerous.  
This device supports WAP 2.0 protocols (HTTP and SSL) that  
run on TCP/IP protocols. Some features of this device, such  
as MMS, browsing, e-mail, and content downloading using  
the browser or over MMS, require network support for  
these technologies.  
For availability of approved enhancements, please check  
with your dealer. When you disconnect the power cord of  
any enhancement, grasp and pull the plug, not the cord.  
9
Get connected  
Use your device on the 2G and 3G networks. See ‘Your  
Nokia N93’ p.11  
Use Bluetooth technology, for example, to transfer files  
and connect to compatible enhancements. See ‘Bluetooth  
connectivity’ p. 83.  
Use infrared to transfer and synchronize data between  
compatible devices, for example. See ‘Infrared connection’  
p. 87.  
Use a wireless LAN to connect to the internet and WLAN  
enabled devices. See ‘Wireless LAN’ p. 92.  
Use Nokia Connectivity Cable CA-53 to connect to  
compatible devices, such as printers and PCs. See ‘Data  
cable’ p. 83. Use Nokia Video Cable CA-64U to connect to  
a compatible TV. See ‘TV configuration’ p. 114.  
Use a compatible microSD card to transfer data or back up  
information, for example. See ‘Memory card tool’ p. 20.  
10  
 
Your Nokia N93  
Model number: Nokia N93-1  
In the fold-closed mode, the cover display provides clock  
and status information. On the standby mode display, the  
signal strength and battery indicators, time information,  
status indicators, and the name of the active profile (if  
other than General) may be shown. If you use the music  
player to listen to a sound clip, volume bars and track  
information are displayed. Use the side scroll keys to play,  
pause, play the next or previous sound clip, and turn the  
volume up or down.  
Hereinafter referred to as Nokia N93.  
Modes  
Your device has four mechanical modes that are optimized  
for different uses: fold closed for carrying, fold open for  
traditional mobile phone use, image for recording video  
and taking pictures, and view for viewing your images and  
videos. To switch between the modes, turn the fold and the  
swing axis display. There is a short time-out before a mode  
is activated.  
If you are using Visual Radio in the fold-closed mode, the  
visual content is not shown on the cover display. You can  
store several preset stations with station name, frequency,  
and location information. This information is shown on  
the cover display. To turn the audio on and off, change the  
channel, and seek new channels, use the scroll key on the  
side of the device.  
Fold-closed mode  
When the fold is closed, the main display  
deactivates and the cover display lights  
up. Ongoing calls end, unless the  
loudspeaker is in use or a compatible  
headset is connected. To change the  
settings, see ‘Cover display’, p. 104. If you  
are using the player to listen to a sound  
clip, it continues to play.  
Calendar and clock alarms and notes for missed calls and  
new received messages are also displayed. To view  
received text messages and the text and image objects of  
received multimedia messages, open the fold, and view  
the message on the main display.  
Incoming calls are indicated by their normal tone and a  
note. In the cover display settings, select Answer if fold  
opened to answer a call when you open the fold. If a  
11  
     
compatible headset is connected to the device, press the  
answer key on the headset. To change the settings, see  
‘Cover display’, p. 104.  
opens about 160 degrees, as shown in the picture. Do not  
force the fold to open more.  
Image mode  
To make calls or use the menu, open the fold.  
When you open the fold to  
90 degrees, hold the device  
sideways, turn the fold  
down so that the main  
display faces you, and the  
image mode is activated.  
The main camera is  
To use the flash as a flashlight, press the flash key on the  
side of the device. To operate the flashlight, do the  
following:  
Quickly press the flash key once. The flashlight is  
activated for 1.5 seconds.  
Quickly press the flash key twice. The flashlight is  
activated for 3 minutes or until you press the flash key  
again.  
activated, and you can see  
the image to be captured.  
Press and hold the flash key. The flashlight is activated  
and stays on for as long as you hold the key or until the  
3-minute time-out ends.  
In image mode, you can  
record videos and take pictures. See ‘Camera’, p. 23.  
In image mode, the numeric keypad is not active. You can  
use the capture key, zoom key, side scroll key, camera  
mode key, and flash key (all located on the side of the  
device), power key, and the landscape selection keys next  
to the main display.  
Fold-open mode  
When you open the fold, the  
fold-open mode is activated  
automatically: the main  
display lights up, the keypad is  
available, and you can access  
the menu. Scroll in the menu.  
View mode  
When the fold is closed and you lift the side of the swing  
axis display when the fold is closed, the view mode is  
activated.  
The fold-open mode is  
activated even if the fold is  
not fully opened. The fold  
12  
   
Use the view mode to do  
the following:  
To start the camera, fully press the capture key in image  
mode.  
View your images.  
Activate photos and  
movies from the  
gallery to watch  
slideshows.  
To call your voice mailbox (network service), press and  
hold  
.
To open multimedia applications, press and hold  
‘Multimedia key’, p. 103.  
. See  
Make hands-free  
To change the profile, press  
, and select a profile.  
video calls, and send  
live video during a  
video call. Adjust the angle of the display for optimum  
secondary camera angle.  
To switch between General and Silent, press and hold  
. If you have two phone lines, this action switches  
between the two lines.  
To open the last dialed numbers list, press  
To use voice commands, press and hold  
.
.
Shortcuts  
Use shortcuts to quickly get the most from your device.  
Refer to the relevant sections in this user guide for further  
details of the functions.  
To start a connection to Services, press and hold  
‘Services’, p. 70.  
. See  
For other shortcuts available in the standby mode, see  
‘Active standby mode’, p. 102.  
Standby mode  
Edit text and lists  
To switch between applications that are open, press and  
hold , and select an application. If memory is low, the  
device may close some applications. The device saves any  
unsaved data before closing an application.  
To mark an item in a list, scroll to it, and press  
at the same time.  
and  
while  
To mark multiple items in a list, press and hold  
you press  
.
or . To end the selection, release , then  
Leaving applications running in the background increases  
the demand on battery power and reduces the battery life.  
13  
   
To select letters and words, press and hold  
same time, press or to highlight text. To copy the  
text to clipboard, while still holding , select Copy. To  
. At the  
Transfer content  
1 Press , and select Tools > Transfer.  
2 In the information view, select Continue.  
3 Select whether you want to use Bluetooth connectivity  
or infrared to transfer the data. Both devices must  
support the selected connection type.  
insert the text into a document, press and hold  
, and  
select Paste.  
4 If you select Bluetooth connectivity, to have your Nokia  
device search for devices with Bluetooth connectivity,  
select Continue. Select the other device from the list.  
You are asked to enter a code on your Nokia device.  
Enter a code (1-16 digits), and select OK. Enter the  
same code on the other device, and select OK. The  
devices are now paired. See ‘Pair devices’, p. 86.  
For some phone models, Transfer is sent to the other  
device as a message. To install Transfer on the other  
device, open the message, and follow the instructions  
on the display.  
Settings  
Your Nokia device normally has MMS, GPRS, streaming,  
and mobile internet settings automatically configured,  
based upon your service provider information. You may  
have settings from your service provider already installed  
in your device, or you may receive the settings from the  
service provider as a special text message.  
Transfer content from  
another device  
If you select infrared, connect the two devices. See  
‘Infrared connection’, p. 87.  
You can copy content such as contacts and calendar  
entries from a compatible Nokia device to your Nokia  
device using Bluetooth connectivity or infrared. The type  
of content that can be copied depends on the phone  
model.  
5 From your Nokia device, select the content you want to  
copy from the other device.  
Content is copied from the memory and compatible  
memory card (if inserted) of the other device to the  
corresponding location in your Nokia device and memory  
card (if inserted). The copying time depends on the amount  
of data to be transferred. You can cancel copying and  
continue later.  
You can insert your SIM card in the other device. When  
your Nokia device is switched on without a SIM card, the  
offline profile is automatically activated.  
14  
     
To view the log information of a previous transfer, in the  
All calls to the device are forwarded to another  
main view, select Transfer log.  
number. If you have two phone lines (network service), the  
indicator for the first line is  
.
and for the second  
To view the devices you have copied or transferred data  
from, in the main view, select Phones.  
A compatible headset is connected to the device.  
A compatible loopset is connected to the device.  
A compatible text phone is connected to the device.  
A data call is active.  
Essential indicators  
The device is being used in a GSM network.  
The device is being used in a UMTS network (network  
service).  
A GPRS or EDGE packet data connection is available.  
A GPRS or EDGE packet data connection is active.  
A GPRS or EDGE packet data connection is on hold.  
A UMTS packet data connection is available.  
A UMTS packet data connection is active.  
A UMTS packet data connection is on hold.  
You have one or more unread messages in the Inbox  
folder in Messag..  
You have received new e-mail in the remote mailbox.  
There are messages waiting to be sent in the Outbox  
folder.  
You have missed calls.  
You have set the device to scan for wireless LANs, and  
a wireless LAN is available. See ‘Wireless LAN’, p. 109.  
Shown if Ringing type is set to Silent and Message  
alert tone, IM alert tone, and E-mail alert tone are set  
to Off.  
A wireless LAN connection is active in a network  
that has encryption.  
The device keypad is locked.  
A wireless LAN connection is active in a network that  
does not have encryption.  
A clock alarm is active.  
The second phone line is being used (network service).  
Bluetooth connectivity is on.  
15  
   
Data is being transmitted using Bluetooth  
connectivity.  
The built-in loudspeaker allows you to speak and listen  
from a short distance without having to hold the device to  
your ear.  
A USB connection is active.  
Warning: Do not hold the device near your ear when  
the loudspeaker is in use, because the volume may be  
extremely loud.  
An infrared connection is active. If the indicator is  
blinking, the device is trying to connect to the other  
device or the connection has been lost.  
To use the loudspeaker during a call, select Options >  
Activate loudsp..  
Keypad lock (keyguard)  
Use the keypad lock to prevent accidental keypresses.  
To turn off the loudspeaker, select Options > Activate  
handset.  
To turn on the display light when the keypad lock is on,  
press  
.
Clock  
To lock, press  
locked,  
, then  
. When the keys are  
is shown on the display.  
To unlock with the fold-open, press  
To unlock with the fold-closed, press and hold the  
camera mode key.  
, then  
.
Select Clock application. To set a new alarm, select  
Options > Set alarm. When an alarm is active,  
is  
shown.  
When the keypad lock is on, calls may be possible to the  
official emergency number programmed into your device.  
To turn off the alarm, select Stop, or to stop the alarm for  
5 minutes, select Snooze.  
If the alarm time is reached while the device is switched  
off, the device switches itself on and starts sounding the  
alarm tone. If you select Stop, the device asks whether you  
want to activate the device for calls. Select No to switch  
off the device or Yes to make and receive calls. Do not  
Volume and loudspeaker control  
To increase or decrease the  
volume level when you have  
an active call or are listening  
to a sound, press  
or  
.
16  
             
select Yes when wireless phone use may cause  
clock main view, and the time in your device is changed  
according to the city selected. Check that the time is  
correct and matches your time zone.  
interference or danger.  
To cancel an alarm, select Clock > Options > Remove  
alarm.  
Headset  
Clock settings  
To change the clock settings, select Clock > Options >  
Settings.  
Connect a compatible  
headset to the Pop-PortTM  
connector of your device.  
To change the time or date, select Time or Date.  
Warning: When  
you use the headset, your  
To change the clock shown in the standby mode, select  
Clock type > Analogue or Digital.  
ability to hear outside  
sounds may be affected.  
Do not use the headset where it can endanger your safety.  
To allow the mobile phone network to update the time,  
date, and time zone information to your device (network  
service), select Network operator time > Auto-update.  
Wrist and lens cover straps  
Thread the  
straps as  
shown, and  
tighten them.  
To change the alarm tone, select Clock alarm tone.  
World clock  
To open the world clock view, open Clock, and press . In  
the world clock view, you can view the time in different  
cities.  
To add cities to the list, select Options > Add city. You can  
add a maximum of 15 cities to the list.  
Wireless LAN  
Your device supports wireless local area network  
(wireless LAN). With wireless LAN, you can  
To set your current city, scroll to a city, and select  
Options > My current city. The city is displayed in the  
17  
           
connect your device to the internet and compatible  
devices that have wireless LAN. For information about  
using your device in a home network, see ‘Home network’,  
p. 19.  
‘Wireless LAN access points’ in the Additional applications  
guide.  
Important: Always enable one of the available  
encryption methods to increase the security of your  
wireless LAN connection. Using encryption reduces the risk  
of unauthorized access to your data.  
To use wireless LAN, a wireless LAN must be avilable in the  
location, and your device must be connected to the  
wireless LAN.  
A wireless LAN connection is established when you create  
a data connection using a wireless LAN Internet access  
point. The active wireless LAN connection ends when you  
end the data connection. To end the connection, see  
‘Connection manager’, p. 91.  
Some places, like France, have restrictions on the use of  
wireless LAN. Check with your local authorities for more  
information.  
Features using wireless LAN, or allowing such features to  
run in the background while using other features, increase  
You can use wireless LAN during a voice call or when  
the demand on battery power and reduce the battery life. packet data is active. You can only be connected to one  
wireless LAN access point device at a time, but several  
applications can use the same wireless LAN connection.  
Your device supports the following wireless LAN features:  
IEEE 802.11b/g standard  
Operation at a frequency of 2.4 GHz  
Wired equivalent privacy (WEP) with keys up to 128  
bits, Wi-Fi protected access (WPA), and 802.1x  
encryption methods. These functions can be used only  
if they are supported by the network.  
When you activate Offline, you can still use wireless LAN  
(if available). Remember to comply with any applicable  
safety requirements when establishing and using a  
wireless LAN connection.  
Tip! To check the unique media access control (MAC)  
address that identifies your device, enter *#62209526#  
in the standby mode.  
Wireless LAN connections  
For information about WLAN wizard, see ‘WLAN wizard’ in  
the Additional applications guide.  
To use wireless LAN, you must create an internet access  
point (IAP) in a wireless LAN. Use the access point for  
applications that need to connect to the internet. See  
18  
Home network  
Your device is compatible with UPnP. With a wireless LAN  
access point device, you can create a home network and  
connect compatible UPnP devices that support wireless  
LAN to the network, such as your Nokia device, a  
compatible PC, a compatible printer, and a compatible  
sound system or a TV, or a sound system or TV equipped  
with a compatible wireless multimedia receiver.  
Various service providers maintain pages specifically  
designed for mobile devices. These pages use the wireless  
markup language (WML), extensible hypertext markup  
language (XHTML), or hypertext markup language (HTML).  
Check the availability of services, pricing, and fees with  
your service provider. Service providers will also give you  
instructions on how to use their services.  
After you have configured the home network, you can  
copy, view, or play compatible media files and print images  
in Gallery on the other connected compatible devices, for  
example, view images stored on your Nokia device on a  
compatible TV. See ‘Home network’, p. 88 and ‘Image print’,  
p. 42.  
Press  
, and select Internet > Web.  
With this additional browser, you are able to view normal  
web pages, to zoom in and out on a page (Mini Map), to  
view web pages that contain only text in narrow form so  
that text wraps, and to read feeds and blogs.  
To set up home networking in your wireless LAN, first  
create and configure your wireless LAN home Internet  
access point, then configure the devices. On your Nokia  
device, configure the settings in Home net. . To connect a  
compatible PC to the home network, on the PC, you must  
install the Media Server software from the DVD-ROM  
supplied with your Nokia device.  
To turn the Mini Map on or off for the current page,  
press  
. When the Mini Map is on, an overview of the  
complete page is shown when you scroll on the page.  
See also ‘Web access point’, p. 70.  
After you have completed the necessary configurations in  
all devices connected to the network, you can start using  
Home net. to share your media files. See ‘View media files’,  
p. 90.  
19  
       
3 Push the card in. You hear a click  
when the card locks into place.  
4 Close the door.  
Eject the memory card  
Memory card  
You can use a compatible miniSD card as  
extra storage space to save the memory  
on your device. You can also back up  
information from your device to the  
memory card.  
1 Before you eject the card, press  
, and select Remove mem.  
card. All applications are closed.  
2 When Remove memory card and press 'OK' is  
displayed, swing open the door of the memory card slot.  
3 Press the memory card to release it from the slot.  
4 Remove the memory card. If the device is switched on,  
select OK when prompted to confirm the removal.  
Important: Do not remove the memory card in the  
middle of an operation when the card is being accessed.  
Removing the card in the middle of an operation may  
damage the memory card as well as the device, and data  
stored on the card may be corrupted.  
Use only compatible miniSD cards with this device. Other  
memory cards, such as Reduced Size MultiMediaCards, do  
not fit in the memory card slot and are not compatible  
with this device. Using an incompatible memory card may  
damage the memory card as well as the device, and data  
stored on the incompatible card may be corrupted.  
Keep all memory cards out of the reach of small children.  
Insert the memory card  
1 To open the door of the  
memory card slot,  
swing it upwards in a  
counterclockwise  
Memory card tool  
direction.  
2 Insert the memory  
card in the slot. Ensure  
that the contact area  
on the card is facing  
up.  
Press , and select Tools > Memory. You can use a  
compatible miniSD card as extra storage space and for  
backing up the information in the device memory.  
To back up information from the device memory to a  
memory card, select Options > Backup phone mem.  
20  
     
To restore information from the memory card to the device  
memory, select Options > Restore from card.  
You can use a compatible miniSD card as extra storage  
space. Memory cards are rewritable, so you can delete old  
information and save new data on a memory card.  
Format a memory card  
When a memory card is reformatted, all data on the card  
is permanently lost.  
To browse files and folders in the device memory or on a  
memory card (if inserted), press , and select Tools > File  
mgr.. The device memory view (  
open the memory card view (  
) opens. Press  
) (if available).  
to  
Some memory cards are supplied preformatted and others  
require formatting. Consult your retailer to find out if you  
must format the memory card before you can use it.  
To move or copy files to a folder, press  
and  
at the  
same time to mark a file, and select Options > Move to  
folder or Copy to folder.  
To format a memory card, select Options > Format mem.  
card. Select Yes to confirm.  
To find a file, select Options > Find and the memory from  
which to search, and enter a search text that matches the  
file name.  
Tip! For optimal performance, use your Nokia device  
to format all new miniSD cards.  
View memory consumption  
To view what types of data you have in the device and how  
much memory the different data types consume, select  
Options > Memory details. The amount of available  
memory is shown in Free memory.  
File manager  
Many features of the device, such as contacts, messages,  
images, videos, ringing tones, calendar notes, documents,  
and downloaded applications, use memory to store data.  
The free memory available depends on how much data is  
already saved in the device memory.  
Memory low—free memory  
The device notifies you if the device or the memory card  
memory is low.  
21  
     
To free device memory, transfer data to a compatible  
memory card, if you have one. Mark files to be moved, and  
select Move to folder > Memory card and a folder.  
memory, use Nokia PC Suite to back up installation files to  
a compatible PC, then use the file manager to remove the  
installation files from the device memory. If the .sis file is  
a message attachment, delete the message from the  
Messaging inbox  
You can also transfer media files to a compatible PC, for  
example, using the transfer option in Gallery. See ‘Back up  
files’, p. 43.  
Help  
Tip! Use Nokia Phone Browser in Nokia PC Suite to  
view the different memories in your device and  
transfer data.  
Your device has context-sensitive help. When an  
application is open, select Options > Help to access help  
for the current view.  
To remove data to free memory, use File mgr. or the  
respective application. For example, you can remove the  
following:  
When you are reading the instructions, to switch between  
help and the application that is open in the background,  
Messages from the Inbox, Drafts, and Sent folders in  
Messag.  
press and hold  
.
Retrieved e-mail messages from the device memory  
Saved web pages  
Saved images, videos, or sound files  
Contact information  
Calendar notes  
Downloaded applications. See also ‘Application  
manager’, p. 114.  
To open help from the main menu, select Tools > Help.  
Select the desired application to view its help topics.  
Tutorial  
Any other data that you no longer need  
The tutorial gives you information about some of the  
features of your device. To access the tutorial in the menu,  
press , and select My own > Tutorial and the section  
you want to view.  
After you install applications to a compatible memory  
card, installation files (.sis) remain in the device memory.  
The files may use large amounts of memory and prevent  
you from storing other files. To maintain sufficient  
22  
       
Camera  
Your Nokia N93 has two cameras, a high-resolution  
camera on the side of the device (the main camera) and a  
lower-resolution camera on the top of the main display  
(the secondary camera). You can use both cameras to take  
still images and record video in the portrait and landscape  
views.  
mode key, or select Options > Switch to video mode to  
switch to video mode.  
Press the capture key to start recording. The record icon  
is displayed and a tone sounds. The red recording  
indicator is lit, indicating that video is being recorded.  
1 To stop recording at any time, press the capture key.  
2 To pause the recording, select Pause; to resume  
recording, select Continue.  
The Nokia N93 device supports an image capture  
resolution of 2048x1536 pixels using the main camera. The  
image resolution in these materials may appear different.  
The video clip is automatically saved to Images &  
video in Gallery. See ‘Gallery’, p. 30.  
The images and video clips are automatically saved in the  
Images & video folder in Gallery. The cameras produce  
.jpg images. Video clips are recorded in the .mp4 file format  
or in the 3GPP file format with the .3gp file extension  
(Sharing modes). See ‘Video settings’, p. 24.  
To make lighting and color adjustments before recording  
a video in the imaging mode, scroll through the toolbar.  
See ‘Setup settings—adjust color and lighting’, p. 28 and  
‘Shooting modes’, p. 28.  
You can send images and video clips in a multimedia  
message as an e-mail attachment or by using Bluetooth  
connectivity.  
To zoom in or out of the subject (continuous 3x optical  
and up to 20x digital zoom), rotate the zoom key on the  
side of the device.  
The video viewfinder displays the following:  
Record videos  
To activate the main camera rotate the display to image  
mode. If the camera is in image mode, use the camera  
23  
     
Status  
After you record a video clip, select the following from the  
toolbar:  
Exit  
indicators (1)  
for audio mute  
on,  
stabilization  
on, video light  
mode, and the  
current  
capture mode.  
The toolbar (2),  
which you can  
scroll through before recording to select the shooting  
mode, white balance, and color tone (the toolbar is not  
displayed during recording).  
The total available video recording time (3). When you  
are recording, the current video length indicator also  
shows the elapsed time and time remaining.  
The device memory ( ) and memory card (  
indicators (4) show where videos are saved.  
The video quality indicator (5) indicates whether the  
quality of the video is TV (high), TV (normal),  
Handset (high), Handset (normal), or Sharing.  
The video clip file type (6).  
To immediately play the video clip you just recorded,  
select Play.  
If you do not want to keep the video, select Delete.  
To send the video using multimedia, e-mail, Bluetooth  
connectivity, or infrared, press  
, or select Send. For  
more information, see ‘Messaging’, p. 44 and  
‘Bluetooth connectivity’, p. 83. This option is not  
available during an active call. You cannot send video  
clips saved in the .mp4 file format in a multimedia  
message.  
Options  
To record a new video clip, select New video.  
Tip! Activate the Offline profile to ensure your video  
recording is not interrupted by incoming calls.  
Video settings  
)
There are two kinds of settings for the video recorder:  
Video setup and main settings. To adjust Video setup, see  
‘Setup settings—adjust color and lighting’, p. 28. The setup  
settings return to the default settings after you close the  
camera, but the main settings remain the same until you  
change them again. To change the main settings, select  
Options > Settings and from the following:  
Tip! Select Options > Turn icons on to display all  
viewfinder indicators or Turn icons off to display  
only the video status indicators.  
Audio recording—Select Off if you do not want to record  
sound.  
24  
     
Video quality—Set the quality of the video clip to TV  
(high) (best quality for long term usage and playback on a  
compatible TV or PC and handset), TV (normal), Handset  
(high), Handset (normal), or Sharing (limited video clip  
size to send using multimedia message (MMS)). If you  
want to view the video on a compatible TV or PC, select TV  
(high), which has VGA resolution (640x480) and the .mp4  
file format. To send the video clip through MMS, select  
Sharing (QCIF resolution, .3gp file format). The size of the  
video clip recorded with Sharing is limited to 300 KB  
(about 20 seconds in duration) so that it can be  
conveniently sent as a multimedia message to a  
compatible device.  
Memory in use—Define the default memory store: device  
memory or memory card (if inserted).  
Take pictures  
To activate the main camera rotate the display to image  
mode. If the camera is in video mode, use the camera  
mode key, or select Options > Switch to image mode to  
switch to image mode.  
To lock the focus on an object, press the capture key  
halfway down (main camera only). The green locked focus  
indicator appears on the display. If the focus was not  
locked, the red focus indicator appears. Release the  
capture key, and press it halfway down again. You can,  
however, take the picture without locking the focus.  
Video stabilisation—Select On to reduce camera shake  
when recording the video.  
Add to album—Select whether you want to add the  
recorded video clip to a certain album in Gallery. Select  
Yes to open a list of available albums.  
To take a picture, in the main camera, press the capture  
key. Do not move the device before the image is saved.  
To make lighting and color adjustments before taking a  
picture in image mode, scroll through the toolbar. See  
‘Setup settings—adjust color and lighting’, p. 28.  
Show captured video—Select whether you want the first  
frame of the recorded video clip to be shown on the display  
after the recording stops. Select Play from the toolbar  
(main camera) or Options > Play (secondary camera) to  
view the video clip.  
Saving the captured image may take longer if you change  
the zoom, lighting, or color settings.  
The camera viewfinder displays the following:  
Optical zoom during recording—Select On or Off. Select  
Off to eliminate mechanical noise caused by lens  
movement during optical zooming when recording.  
25  
 
Status  
Tip! Select Options > Turn icons on to display all  
viewfinder indicators or Turn icons off to display  
only the camera status indicators.  
Exit  
indicators (1)  
for sequence  
on, self-timer  
on; Automatic  
When taking a picture, note the following:  
Use both hands to keep the camera still.  
The quality of a digitally zoomed picture is lower than  
that of a nonzoomed picture.  
The camera goes into the battery saving mode if there  
are no keypresses for a moment. To continue taking  
(
), On ( ),  
or Off (  
)
flash mode,  
and the  
current  
Options  
pictures, press  
.
capture mode.  
The toolbar (2), which you can scroll through before  
capturing the image to select the shooting mode,  
white balance, exposure value, and color tone (the  
toolbar is not displayed during focus and image  
capture).  
The image resolution indicator (3) indicates whether  
the quality of the image is Print 3M - Large  
(2048x1536 resolution), Print 2M - Med.(1600x1200  
resolution), Print 1.3M - Small (1280x960  
resolution), or MMS 0.3M (640x480 resolution).  
The image counter (4) displays the estimated number  
of images you can capture using the current image  
quality setting and memory in use (the counter is not  
displayed during focus and image capture).  
After you take the picture, select the following from the  
toolbar:  
If you do not want to keep the image, select Delete.  
To send the video using multimedia, e-mail, Bluetooth  
connectivity, or infrared, press  
, or select Send.  
To capture a new image, select New image.  
To print the picture, select Print. See ‘Image print’,  
p. 42.  
Still image camera settings  
There are two kinds of settings for the still image camera:  
Image setup and main settings. To adjust Image setup, see  
‘Setup settings—adjust color and lighting’, p. 28. The setup  
settings return to the default settings after you close the  
camera, but the main settings remain the same until you  
The device memory ( ) and memory card (  
indicators (5) show where images are saved.  
)
26  
 
change them again. To change the main settings, select  
Options > Settings and from the following:  
Shutter tone—Select the tone you want to hear when you  
take a picture.  
Image qualityPrint 3M - Large (2048x1536 resolution),  
Print 2M - Med. (1600x1200 resolution), Print 1.3M -  
Small (1280x960 resolution), or MMS 0.3M (640x480  
resolution). The better the image quality, the more memory  
the image consumes. If you want to print the image, select  
Print 3M - Large, Print 2M - Med., or Print 1.3M -  
Small. If you want to send it through e-mail, select Print  
1.3M - Small. To send the image through MMS, select  
MMS 0.3M.  
Memory in use—Select where to store your images.  
Take pictures in a sequence  
Sequence mode is available only in the main camera.  
To set the camera to take up to six pictures in a sequence  
(if enough memory available), select Options > Sequence  
mode.  
To take the pictures, press the capture key.  
These resolutions are only available in the main camera.  
After you take the pictures, they are shown in a grid on the  
Add to album—Select whether you want to save the image  
to a certain album in the gallery. If you select Yes, a list of  
available albums opens.  
display. To view a picture, press  
to open it.  
You can also use the sequence mode with the self-timer.  
To return to the sequence mode viewfinder, press the  
capture key.  
Show captured image—Select Yes if you want to see the  
captured image after it is taken, or No if you want to  
continue taking pictures right away.  
You in the picture—self-timer  
The self-timer is available only in the main camera.  
Extended zoom (main camera only)—Select On  
(continuous) to allow the zoom increments to be smooth  
and continuous between digital and extended digital zoom  
or On (paused) to allow the zoom increments to pause at  
the digital and extended digital step point. If you want to  
limit the zoom to where the selected image quality is  
maintained, select Off.  
Use the self-timer to delay the capture so that you can  
include yourself in the picture. To set the self-timer delay,  
select Options > Self timer > 2 seconds, 10 seconds, or  
20 seconds. To activate the self-timer, select Activate.  
The self-timer indicator ( ) blinks and the device beeps  
Flicker cancellation—Select 50Hz or 60Hz.  
27  
   
when the timer is running. The camera takes the picture  
after the selected delay elapses.  
mode uses its own lighting settings that have been  
adjusted according to a certain kind of environment.  
You can also use the self-timer in the sequence mode.  
White balance—Select the current lighting condition from  
the list. This allows the camera to reproduce colors more  
accurately.  
Tip! Select Options > Self timer > 2 secondsto keep  
your hand steady when taking a picture.  
Exposure value(images only)—Adjust the exposure time of  
the camera.  
Flash  
Colour tone—Select a color effect from the list.  
The flash is available only in the main camera.  
The screen display changes to match any settings you  
make so you see how the change affects the pictures or  
videos.  
Keep a safe distance when using the flash. Do not use the  
flash on people or animals at close range. Do not cover  
the flash while taking a picture.  
The available settings vary depending on the selected  
camera.  
The camera has an LED flash for low light conditions. The  
following flash modes are available: Automatic (  
), On  
(
), and Off ( ).  
The setup settings apply only to the main camera.  
Independent settings are available for image and video  
modes, and are retained when switching between the two  
modes.  
To switch between the flash modes, press the flash key.  
Setup settings—adjust color and  
lighting  
Shooting modes  
To enable the camera to reproduce colors and lighting  
more accurately or to add effects to your pictures or  
videos, scroll through the toolbar, and select from the  
following options:  
A shooting mode helps you to find the right color and  
lighting settings for the current environment. Select a  
proper shooting mode for taking pictures or recording  
video clips from the shooting mode list. The settings of  
each shooting mode have been set according to a certain  
style or environment.  
Shooting mode—Select a proper shooting mode for the  
environment in which you take pictures. Every shooting  
28  
         
Shooting modes are only available in the main camera.  
Scroll through the toolbar, and select from the video or  
image shooting modes.  
When you take pictures, the default shooting mode is  
Automatic.  
To make your own shooting mode suitable for a certain  
environment, select User > Options > Change. In the user  
defined shooting mode you can adjust different lighting  
and color settings. To copy the settings of another  
shooting mode, select Based on shooting mode and the  
desired shooting mode.  
29  
Gallery  
To store and organize your images, video clips, sound clips,  
playlists, and streaming links, or share your files with  
other compatible UPnP devices through wireless LAN,  
memory card Select Copy to phone mem. or Move to  
phone mem..  
Files stored on the memory card (if inserted) are indicated  
press  
, and select Gallery. To open the gallery from the  
with  
with  
. Files stored on the device memory are indicated  
Camera application, select Options > Go to Gallery. From  
.
Camera, only the Images & video folder is available.  
To reduce the size of images that you already copied to  
other locations, such as to a compatible PC, select  
Options > Transfer and memory > Shrink. To reduce the  
resolution of an image to 640x480, select Shrink. To  
increase free memory space after you have copied items to  
other locations or devices, select a file and Options >  
Transfer and memory > Free memory. See ‘Back up files’,  
p. 43.  
Tip! To switch from Gallery to the camera, in the  
Images & video folder, press the capture key or the  
camera mode key, or select Options > Go to Camera.  
Select Images & video  
Streaming links , Presentations  
Home net. , and press to open it.  
, Tracks , Sound clips  
,
, All files , or  
Video clips, .ram files, and streaming links are opened and  
played in the RealPlayer application. See ‘RealPlayer’,  
p. 78. You can also create albums; and mark, and add  
items to albums. See ‘Albums’, p. 35.  
To download files into Gallery in one of the main folders  
using the browser, select Graphic downl., Video downl.,  
Track downl., or Sound downl.. The browser opens, and  
you can select a bookmark from which the site can  
download.  
To open a file, press  
music and sound clips in Music player. See ‘View images  
and video clips’, p. 31.  
. Videos open in RealPlayer, and  
To share media files saved in Gallery with other compatible  
UPnP devices through wireless LAN, you must first create  
and configure your wireless LAN home Internet access  
point, and then configure the Home net. application. See  
‘Wireless LAN’, p. 17.  
To copy or move files to a compatible memory card (if  
inserted) or to device memory, select a file and Options >  
Move and copy. Select Copy to memory card or Move to  
30  
         
The options related to Home net. are not available in  
Gallery before the settings for Home net. have been  
configured.  
To create custom video clips, select a video clip or several  
clips in the gallery and Options > Edit. See ‘Edit video  
clips’, p. 31.  
To print your images on a compatible printer, or to store  
them on your memory card (if inserted) for printing, select  
Options > Print. See ‘Image print’, p. 42.  
View images and video clips  
Pictures taken and video clips recorded with the camera  
are stored in Images & video in Gallery. Images and video  
clips can also be sent to you in a multimedia message, as  
an e-mail attachment, through Bluetooth connectivity, or  
by using infrared. To be able to view a received image or  
video clip in the gallery or in the media player, you must  
save it in the device memory or on a compatible memory  
card (if inserted).  
To send a multimedia message to your service provider's  
media file uploading service (network service), press  
and select Upload (if available). Contact your service  
provider for more information.  
,
To view the image, scroll to an image, and press  
.
When the image is opened, to zoom an image, select  
Options > Zoom in or Zoom out. The zooming ratio is at  
the top of the display. The zooming ratio is not stored  
permanently.  
Open Images & video in Gallery. The images and video clip  
files are in a loop, and ordered by date. The number of files  
is displayed. To browse the files one by one, scroll left or  
right. To browse files in groups, scroll up or down.  
To use the picture as a background image, select the  
picture and Options > Assign > Set as wallpaper.  
To edit a video clip or a photo, select Options > Edit. An  
image editor or a video editor opens. See ‘Edit video clips’,  
p. 31. See ‘Edit images’, p. 33.  
To delete an image or video clip, press  
.
Edit video clips  
To edit video clips in Gallery and create custom video  
clips, scroll to a video clip, and select Options > Edit. See  
‘Gallery’, p. 30. To create custom video clips, combine and  
trim video clips, and add images, sound clips, transitions,  
To add an image or a video clip to an album in the gallery,  
select Options > Albums > Add to album. See ‘Albums’,  
p. 35.  
31  
           
and effects. Transitions are visual effects that you can add  
in the beginning and end of the video or between the  
video clips.  
Edit image (shown only if you added an image)—Move,  
remove, or duplicate an image; define how long it stays on  
the screen; and set a background or a color effect to the  
image.  
You can also use Movie director to create custom video  
clips. Select the video clips and images you want to create  
a muvee with and select Options > Edit > Create muvee.  
See ‘Movie director’, p. 81.  
Edit sound clip (shown only if you have added a sound  
clip)—Cut or move the sound clip, adjust its length, or  
remove or duplicate the clip.  
In the video editor you can see two timelines: video clip  
timeline and sound clip timeline. The images, text, and  
transitions added to a video clip are shown on the video  
clip timeline. To switch between the timelines, scroll up or  
down.  
Edit transition—There are three types of transitions: at the  
start of a video, at the end of a video, and transitions  
between video clips. You can select start transition when  
the first transition of the video is active.  
Insert—Select Video clip, Image, Text, Sound clip, or New  
sound clip.  
Edit video, sound, image, text, and  
transitions  
Movie—Preview the movie in the full screen or as a  
thumbnail, save or send the movie, or cut the movie to a  
proper size for sending it in a multimedia message.  
To create custom video clips, mark and select one or more  
video clips, and select Options > Edit > Video editor.  
To take a snapshot of a video clip, in the cut video view,  
select Options > Take snapshot. In the thumbnail preview  
To modify the video, select from the following options:  
view, press  
, and select Take snapshot.  
Edit video clip—Cut, add color effect, use slow motion,  
mute or unmute sound, move, remove, or duplicate the  
clip.  
To save your video, select Options > Movie > Save. To  
define the Memory in use, select Options > Settings. The  
default is the device memory.  
Edit text (shown only if you added text)—Move, remove,  
or duplicate text; change the color and style of the text;  
define how long it stays on the screen; and add effects to  
the text.  
In Settings, you can also define Default video name,  
Default sc. shot name, Resolution, and Memory in use.  
32  
 
To send the video, select Send > Via multimedia,  
Via e-mail, Via Bluetooth, or Via infrared. Contact your  
service provider for details of the maximum multimedia  
message size that you can send.  
area, select Back. The selected areas form a rectangle that  
represents the cropped image.  
If you selected a predefined aspect ratio, select the upper  
left corner of the area to be cropped. To resize the  
highlighted area, use the scroll key. To freeze the selected  
Tip! If you want to send a video clip that is over the  
maximum multimedia message size allowed by your  
service provider, you can send the clip using Bluetooth  
wireless technology. See ‘Send data’, p. 85. You can also  
transfer your videos to a compatible PC using Bluetooth  
connectivity, or by using a compatible memory card reader  
enhancement.  
area, press  
. To move the area within the picture, use  
the scroll key. To select the area to be cropped, press  
.
To reduce redness of the eyes in an image, select  
Options > Apply effect > Red eye reduction. Move the  
cross onto the eye, and press  
. A loop appears on the  
display. To resize the loop to fit the size of the eye, use the  
scroll key. To reduce the redness, press  
.
Edit images  
Shortcuts in the image editor:  
To view an image in the full screen, press  
return to the normal view, press again.  
To rotate an image clockwise or counterclockwise,  
press or  
To zoom in or out, press  
To move on a zoomed image, press  
. To  
To edit the pictures after taking them, or images already  
saved in Gallery, select Options > Edit.  
Select Apply effect to crop and rotate the image; adjust  
the brightness, color, contrast, and resolution; and add  
effects, text, clip art, or a frame to the picture.  
.
or  
.
,
,
or  
.
To crop an image, select Options > Apply effect > Crop.  
To crop the image size manually, select Manual or a  
predefined aspect ratio from the list. If you select Manual,  
a cross appears in the upper left corner of the image. Move  
the scroll key to select the area to crop, and select Set.  
Another cross appears in the lower right corner. Again  
select the area to be cropped. To adjust the first selected  
Slide show  
Select Options > Slide show > Start to view images and  
video clips in the full screen mode. The slide show starts  
from the selected file. Select from the following:  
33  
       
Play—to open the RealPlayer application, and play a  
When you open an image in the thumbnail view while it is  
viewed on the TV, the Zoom in option is not available.  
When image is not zoomed, the opened image is displayed  
on the TV in full screen.  
selected video clip  
Pause—to pause the slide show  
Continue—to resume the slide show, if paused  
End—to close the slide show  
You can view videos and images as a slide show. All items  
in an album or marked videos and images are displayed on  
the TV in full screen while the selected music plays.  
To browse the images, press  
(previous) or  
(next).  
When you open a highlighted video clip, RealPlayer starts  
playing the video clip on the device display and the TV  
screen. See ‘RealPlayer’, p. 78.  
To adjust the tempo of the slide show, before starting the  
slide show, select Options > Slide show > Settings>  
Delay between slides.  
All audio, including the stereo video clip sound, ringing  
tone, and key tone, is routed to the TV when the Nokia  
Video-Out Cable is connected to the device. You can use  
the device microphone normally.  
To add sound to the slide show, select Options > Slide  
show > Settingsand from the following:  
Music—Select On or Off.  
Track—Select a music file from the list.  
TV out settings must be configured for the applicable TV  
system and TV aspect ratio. See ‘TV configuration’, p. 114.  
To decrease or increase the volume during the slide show,  
press  
or  
.
Presentations  
TV out mode  
With presentations, you can view .svg (scalable vector  
graphics) files, such as cartoons and maps. These images  
maintain their appearance when printed or viewed with  
different screen sizes and resolutions. To view .svg files,  
select the Presentations folder, scroll to an image, and  
select Options > Play.  
You can watch videos and images stored in your device on  
the screen of a compatible TV. Connect a compatible  
Nokia Video connectivity cable to the video input of a  
compatible TV. For all applications other than the Images  
& video folder in Gallery and RealPlayer, the TV screen  
displays what is displayed on the screen of your device.  
To zoom in, press  
. To zoom out, press  
.
34  
         
To switch between full screen and normal screen, press *.  
You can only print images that are in jpeg format.  
, and select Gallery > Images & video. Select  
1 Press  
an image or images, and Options > Print > Order  
prints.  
Albums  
With albums you can conveniently manage your images  
and video clips. To view the albums list, in the Images &  
video folder, select Options > Albums > View albums.  
2 Select a service provider from the list.  
3 Select Options and from the following:  
Open—to start the connection to the service provider  
Remove—to remove the service provider from the list.  
If you remove the last service provider from the list, the  
Order prints option is not available until you have at  
least one configuration file installed.  
To add a picture or a video clip to an album in the gallery,  
scroll to a picture or video clip, and select Options >  
Albums > Add to album. A list of albums opens. Select the  
album to which you want to add the picture or video clip,  
Log—to view the details of the previous orders: the  
name of the service provider, total sum, and status of  
the order.  
When you are connected to the service provider server,  
the images preview view opens, and displays the  
images you selected in Gallery.  
and press  
.
To remove a file from an album, press  
. The file is not  
deleted from the Images & video folder in Gallery.  
Print online  
With the Print online application you can print images  
online, and order different products with the selected  
image, such as mugs or mouse pads. The available products  
depend on the service provider.  
4 Select Options and from the following:  
Preview—to view the image before ordering a print.  
Scroll up or down to view the images.  
Order now—to submit your order  
Change product order—to adjust the product details  
and number of copies for the selected image. In the  
product order view, you can select which product and  
of what type you want to order. The available options  
and products vary depending on the service provider.  
Scroll left or right to view and change the image  
details of the other images in the order.  
In order to use Print online, you must subscribe to the  
service with an online printing service provider and have at  
least one printing service configuration file installed. The  
files can be obtained from printing service providers that  
support Print online.  
35  
       
Change customer info—to change the customer and  
order information. You can copy the customer  
information from contacts.  
Add image—to add more images to the order  
Remove image—to remove images from the order  
Log—to view the details of the previous orders.  
When the order is sent, Order sent successfully is  
displayed.  
usually subscribe to the service on the web page of the  
service provider. Contact your service provider for details  
on subscribing to the service. For more information on  
compatible service providers, see www.nokia.com/support.  
When you open the service for the first time in the Online  
sharing application, you are prompted to provide the user  
name and password. You can access the settings later  
through Options > Settings in the Online sharing  
application. See ‘Online sharing settings’, p. 37.  
Online sharing  
Upload files  
Note: The availability of this service may vary  
according to your country or sales area.  
Press  
, and select Gallery > Images & video, the files  
you want to upload, and Options > Send > Web upload.  
You can access the Online sharing application also from  
the main camera.  
With the Online sharing application, you can share your  
images and videos in online albums, weblogs, or in other  
online sharing services on the web. You can upload  
content, save unfinished posts as drafts and continue  
later, and view the content of the albums. The supported  
content types may vary depending on the service provider.  
The Select service view opens. To create a new account to  
a service, select Options > Add new account or the service  
icon with the text Create new in the services list. If you  
have created a new account offline, or modified an  
account or service settings through a web browser on a  
compatible PC, to update the services list in your device,  
select Options > Retrieve services. To select a service,  
press the scroll key.  
Copyright protections may prevent some images, music  
(including ringing tones), and other content from being  
copied, modified, transferred or forwarded.  
Get started  
To use Online sharing, you must subscribe to the service  
with an online image sharing service provider. You can  
When you select the service, the selected images and  
videos are shown in the edit state. You can open and view  
36  
   
the files, reorganize them, add text to them, or add new  
files.  
Sent—to view the 20 latest entries created through  
your device  
New post—to create a new entry  
To cancel the web upload process, and save the created  
post as a draft, select Back > Save as draft. If the  
uploading has already started, select Cancel > Save as  
draft.  
The available options may vary depending on the service  
provider.  
Online sharing settings  
To edit the Online sharing settings, in the Online sharing  
application, select Options > Settings.  
To connect to the service and upload the files to the web,  
select Options > Upload, or press  
.
Open online service  
My accounts  
To view uploaded images and videos in the online service,  
or draft and sent entries in your device, in the Images &  
video folder, select Options > Open service. Accounts can  
also be created and modified offline. If you have created a  
new account offline, or modified an account or service  
settings through a web browser, and wish to update the  
services list in your device, select Options > Retrieve  
services. Select a service from the list.  
In My accounts, you can create new accounts or edit  
existing accounts. To create a new account, select  
Options> Add new account. To edit an existing account,  
select an account and Options > Edit. Select from the  
following:  
Account name—to enter a name for the account  
Service provider—to select the service provider you want  
to use. You cannot change the service provider for an  
existing account, you must create a new account for the  
new service provider. If you delete an account in My  
accounts, the services related to the account are also  
deleted from you device, including the sent items for the  
service.  
After you open a service, select from the following:  
Open in Web browser—to connect to the selected  
service and view the uploaded and draft albums in the  
web browser. The view may vary depending on the  
service provider.  
Drafts—to view and edit the draft entries, and upload  
them to the web  
37  
 
User name and Password—to enter the user name and  
password you created for your account when you  
registered to the online service  
Upload image size—to select the size in which the images  
are uploaded to the service  
Application settings  
Display image size—to select the size in which the image  
is shown on the display of your device. This setting does  
not affect the upload image size.  
Display text size—to select the font size used to display  
text in draft and sent entries, or when you add or edit text  
to a new entry  
Advanced  
Service providers—to view or edit service provider  
settings, add a new service provider, or view details of a  
service provider. If you change the service provider, all the  
My accounts information for the previous service  
provider is lost. You cannot change the settings of  
predefined service providers.  
Default access point—to change the access point used to  
connect to the online service, select the access point you  
want.  
38  
Media applications  
Play music  
Music player  
When you open the music player, the previously played  
track or playlist is displayed. To view the music library,  
Press  
, and select Music player. With the music player,  
select  
or Options > Music library and the desired  
you can play music files and create and listen to playlists.  
song list. To start playing the songs in the view, select  
Warning: Listen to music at a moderate level.  
Continuous exposure to high volume may damage your  
hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be  
extremely loud.  
Options > Play.  
When a song is playing, to change between play and  
pause, press  
or  
.
To stop a song, press  
. To fast forward or rewind, press  
and hold  
or  
. To start playing the next or previous  
or .  
song, press  
Add music  
When you open the music player for the first time, the  
player searches the device memory for music files to create  
a music library.  
To view the currently played song list, select  
or  
Options > Open 'Now playing'. To save the song list as a  
playlist, select Options > Add to track list, and create a  
new playlist, or select a saved playlist.  
After you add or remove music files in the device, update  
your music library. Select Options > Music library >  
Options > Update Music library.  
To adjust the volume, press  
or  
.
To modify the tone of music playback, select Options >  
Equaliser.  
Tip! You can transfer music files from your device to  
a compatible memory card (if inserted) with Nokia  
Music Manager available in Nokia PC Suite.  
To select between random play and normal play mode,  
select Options > Random play. To select whether playing  
39  
       
stops at the end of the playlist or restarts from its  
beginning, select Options > Loop.  
Transfer music  
You can transfer music from a compatible PC or other  
compatible devices using a compatible USB cable or  
Bluetooth connectivity. For details, see ‘Bluetooth  
connectivity’, p. 83.  
To open your web bookmarks for downloading music,  
select Options > Track downloads.  
To return to the standby mode and leave the music  
playing in the background, select Options > Play in  
background.  
To refresh the library after you have updated the song  
selection in your device, select Options > Update Music  
library  
Music library  
The requirements of the PC for music transfer:  
To view the music library, select Options > Music library.  
All tracks lists all music. To view sorted songs, select  
Albums, Artists, Genres, or Composers. The album, artist,  
genre, and composer information is collected from the ID3  
or M4A tags of the song files, if available.  
Microsoft Windows XP operating system (or later)  
A compatible version of Windows Media Player  
application. You can get more detailed information  
about Windows Media Player compatibility from the  
Nokia N93 section of the Nokia website.  
To add songs, albums, artists, genres, or composers to a  
playlist, select the items and Options > Add to track list.  
You can create a new playlist or add to an existing one.  
Nokia PC Suite 6.7 or later  
Transfer music from PC  
To view playlists, select Track lists. To create a new  
playlist, select Options > New track list. When viewing a  
playlist you have created yourself, to add more songs,  
select Options > Add tracks.  
You can use three different methods to transfer music:  
To view your device on a PC as an external hard drive  
where you can transfer any data files, make the  
connection with a compatible USB cable or Bluetooth  
connectivity. If you are using the USB cable, select  
Mass storage as the connection mode. A compatible  
memory card needs to be inserted in the device.  
To synchronize music with Windows Media Player,  
connect the compatible USB cable and select Media  
To delete a playlist, press  
. Deleting a playlist only  
deletes the playlist, not the music files.  
40  
 
player as the connection mode. A compatible memory  
card needs to be inserted in the device.  
To use Nokia Music Manager in Nokia PC Suite, connect  
the compatible USB cable and select PC Suite as the  
connection mode.  
To transfer manual selections:  
1 After your device is connected with Windows Media  
Player, select your device in the navigation pane, if  
more than one device is connected.  
2 Drag the songs or albums to the list pane for  
synchronization. To remove songs or albums, select an  
item in the list, and click Remove from list.  
3 Check that the list pane contains the files you want to  
synchronize and that there is enough free memory on  
the device. Click Start Sync. to start the  
synchronization.  
To change the default USB connection mode, press  
select Connect. > Data cbl. > Data cable mode.  
,
Both Windows Media Player and Nokia Music Manager in  
Nokia PC Suite have been optimized for transferring music  
files. For information about transferring music with Nokia  
Music Manager, see the Nokia PC Suite user guide.  
Automatic synchronization  
Music transfer with Windows Media Player  
To change the default file transfer option in Windows  
Media Player, click the arrow under Sync, select your  
device, and click Set up Sync. Clear or select the Sync this  
device automatically check box.  
The functionality of the music synchronization may vary  
between different versions of the Windows Media Player  
application. For more information, see the corresponding  
Windows Media Player guides and helps.  
If the Sync this device automatically check box is  
selected and you connect your device, the music library in  
your device is automatically updated based on playlists  
you have selected in Windows Media Player.  
Manual synchronization  
After connecting your device with a compatible PC,  
Windows Media Player selects manual synchronization if  
there is not enough free memory in your device. With  
manual synchronization, you can select the songs and  
playlists that you want to move, copy, or remove.  
If no playlists have been selected, the whole PC music  
library is selected for synchronization. Note that your PC  
library may contain more files that can fit to the device  
memory and the compatible memory card of your device.  
See the Windows Media Player help for more information.  
The first time you connect your device you must enter a  
name that is used as the name of your device in Windows  
Media Player.  
41  
The playlists on your device are not synchronized with the  
Windows Media Player playlists.  
If the default printer is not available, a list of available  
printing devices is displayed.  
To change the default printer, select Options > Print  
settings > Default printer.  
Image print  
Use Image print to print your images using a compatible  
data cable, wireless LAN (if available), Bluetooth  
Print preview  
The print preview view opens only when you start printing  
an image in the gallery.  
connectivity, or a compatible memory card (if available).  
You can only print images that are in jpeg format. The  
pictures taken with the camera are automatically saved in  
jpeg format.  
The selected images are displayed using predefined  
layouts. To change the layout, press  
or  
through the  
available layouts for the selected printer. If the images do  
To print images with Image print, select the image you  
want to print and the print option in the gallery, camera,  
image editor, or image viewer.  
not fit on a single page, press  
additional pages.  
or  
to display the  
To print to a printer compatible with Image print, connect  
the data cable before you select the print option.  
Print settings  
The available options vary, depending on the capabilities of  
the printing device you selected.  
Printer selection  
When you use Image print for the first time, a list of  
available printers is displayed after you select the image.  
Select a printer. The printer is set as the default printer.  
To set a default printer, select Options > Default printer.  
To select the paper size, select Paper size, the size of paper  
from the list, and OK. Select Cancel to return to the  
previous view.  
If you have connected a printer compatible with Image  
print using a Nokia connectivity cable CA-53, the printer  
is automatically displayed.  
42  
 
Back up files  
To transfer and back up media files from your device to a  
compatible PC through the wireless LAN, select Options >  
Transfer and memory > Automatic transfer. See  
‘Wireless LAN’, p. 17.  
Your device starts a device search. Select a device and a  
folder to which you want to transfer the media files. Select  
OK.  
To change the Storage device or Storage folder settings,  
select Options > Settings.  
43  
   
Messaging  
Press  
, and select Messag.. In Messag., you can create,  
My folders—Organize your messages into folders.  
send, receive, view, edit, and organize text messages,  
multimedia messages, e-mail messages, and special text  
messages containing data. You can also receive messages  
and data using Bluetooth connectivity or infrared, receive  
web service messages, cell broadcast messages, and send  
service commands.  
Tip! To avoid rewriting messages that you send often,  
use texts in the templates folder.  
Mailbox—Connect to your remote mailbox to retrieve  
your new e-mail messages or view your previously  
retrieved e-mail messages offline. See ‘E-mail’, p. 54.  
Drafts—Draft messages that have not been sent are  
Note: Your device may indicate that your  
message was sent to the message center  
number programmed into your device. Your  
device may not indicate whether the message is  
received at the intended destination. For more details  
about messaging services, contact your service  
provider.  
stored here.  
Sent—The last 20 messages that have been sent,  
excluding messages sent using Bluetooth connectivity or  
infrared, are stored here. To change the number of  
messages to be saved, see ‘Other settings’, p. 56.  
Outbox—Messages waiting to be sent are temporarily  
stored here.  
To create a new message, select New message.  
Only devices that have compatible features can receive  
and display multimedia messages. The appearance of a  
message may vary depending on the receiving device.  
Example: Messages are placed in the outbox, for  
example, when your device is outside network  
coverage. You can also schedule e-mail messages to be  
sent the next time you connect to your remote mailbox.  
Messag. contains the following folders:  
Reports—You can request the network to send you a  
delivery report of the text messages and multimedia  
messages you have sent (network service). Receiving a  
Inbox—Received messages, except e-mail and cell  
broadcast messages, are stored here. E-mail messages are  
stored in the Mailbox.  
44  
 
delivery report of a multimedia message that has been sent  
to an e-mail address may not be possible.  
Traditional text input  
is displayed when you are writing text using  
traditional text input.  
Tip! When you have opened any of the default folders,  
to switch between the folders, press  
or  
.
Press a number key (  
) repeatedly until the  
To enter and send service requests (also known as USSD  
commands), such as activation commands for network  
services, to your service provider, select Options > Service  
command in the main view of Messag..  
desired character appears. There are more characters  
available for a number key than are printed on the key.  
If the next letter is located on the same key as the  
present one, wait until the cursor appears (or press  
to end the time-out period), and enter the letter.  
Cell broadcast (network service) allows you to receive  
messages on various topics, such as weather or traffic  
conditions from your service provider. For available topics  
and relevant topic numbers, contact your service provider.  
In the main view of Messaging, select Options > Cell  
broadcast. In the main view, you can see the status of a  
topic, a topic number, name, and whether it has been  
flagged ( ) for follow-up.  
To insert a space, press  
. To move the cursor to the  
next line, press three times.  
Predictive text input  
You can enter any letter with a single keypress. Predictive  
text input is based on a built-in dictionary to which you  
can add new words.  
is displayed when you write text  
Cell broadcast messages cannot be received in UMTS  
networks. A packet data connection may prevent cell  
broadcast reception.  
using predictive text input.  
1 To activate predictive text input, press  
, and select  
Predictive text on. This activates predictive text input  
for all editors in the device.  
Write text  
ABC, abc, and Abc indicate the selected character mode.  
123 indicates the number mode.  
45  
   
2 To write the desired word,  
press the keys,  
Write compound words  
Write the first half of a compound word; to confirm it,  
.
Press each key only once  
for one letter. For  
example, to write "Nokia"  
when the English  
press  
. Write the last part of the compound word. To  
complete the compound word, press  
to add a space.  
Turn predictive text input off  
To turn predictive text input off for all editors in the device,  
dictionary is selected,  
press  
for k,  
for a.  
for N,  
for o,  
press  
, and select Predictive text > Off.  
for i, and  
Tip! To turn predictive text input on or off, quickly  
press  
twice.  
The word suggestion changes after each keypress.  
3 When you finish writing the word correctly, press  
Tips on text input  
To insert a number in the letter mode, press and hold the  
desired number key.  
to confirm it, or press  
to add a space.  
repeatedly to view  
the matching words the dictionary has found one by  
If the word is not correct, press  
one, or press  
Matches.  
, and select Predictive text >  
To switch between the letter and number mode, press and  
hold  
.
If the ? character is shown after the word, the word is  
not in the dictionary. To add a word to the dictionary,  
select Spell, enter the word using traditional text  
input, and select OK. The word is added to the  
dictionary. When the dictionary is full, a new word  
replaces the oldest added word.  
To switch between the different character modes, press  
.
To delete a character, press  
character, press and hold  
. To delete more than one  
.
4 Start writing the next word.  
To use the most common punctuation marks, press  
To open a list of special characters, press and hold  
.
.
Tip! To insert several special characters at the same  
time, press when you select each character.  
46  
2 In the To field, press  
to select recipients or  
groups from contacts, or  
enter the recipient’s  
phone number or e-mail  
address. To add a  
Write and send messages  
The appearance of a multimedia message may vary,  
depending on the receiving device.  
Before you can create a multimedia message or write an  
e-mail, you must have the correct connection settings in  
place. See ‘Receive MMS and e-mail settings’, p. 48 and  
‘E-mail’, p. 54.  
semicolon (;) that  
separates the recipients,  
press  
. You can also  
The wireless network may limit the size of MMS messages.  
If the inserted picture exceeds this limit, the device may  
make it smaller so that it can be sent by MMS.  
copy and paste the  
number or address from  
the clipboard.  
3 In the Subjectfield, enter  
1 Select New message and one of the following:  
Text msg.—to send a text message  
the subject of a multimedia message or e-mail. To  
change the fields that are visible, select Options >  
Address fields.  
Multimedia message—to send a multimedia message  
(MMS)  
4 In the message field, write the message. To insert a  
template, select Options > Insert or Insert object >  
Template.  
E-mail—to send an e-mail  
If you have not set up your e-mail account, you are  
prompted to do so. To start creating the e-mail settings  
with the mailbox guide, select Start.  
5 To add a media object to a multimedia message, select  
Options > Insert object > Image, Sound clip, or Video  
clip. When sound is added,  
is shown.  
To change the format in which recorded videos are  
saved, see ‘Video settings’, p. 24.  
6 To take a new picture or record sound or video for a  
multimedia message, select Insert new > Image,  
Sound clip, or Video clip. To insert a new slide to the  
message, select Slide.  
47  
       
To see what the multimedia message looks like, select  
Options > Preview.  
Receive MMS and e-mail settings  
You may receive the settings in a message from your  
service provider. See ‘Data and settings’, p. 49.  
7 To add an attachment to an e-mail, select Options >  
Insert > Image, Sound clip, Video clip, or Note.  
E-mail attachments are indicated by  
.
For availability of and subscription to data services,  
contact your service provider. Follow the instructions given  
by your service provider.  
Tip! To send other file types as attachments, open  
the appropriate application, and select Send > Via  
e-mail, if available.  
Enter the MMS settings manually  
8 To send the message, select Options > Send, or  
1 Press  
, and select Tools > Settings > Connection >  
press  
.
Access points, and define the settings for a multimedia  
messaging access point. See ‘Connection’, p. 106.  
Your device supports the sending of text messages beyond  
the character limit for a single message. Longer messages  
are sent as a series of two or more messages. Your service  
provider may charge accordingly. Characters that use  
accents or other marks, and characters from some  
language options, take up more space, limiting the  
number of characters that can be sent in a single message.  
2 Press  
, and select Messaging > Options >  
Settings > Multim. msg. > Access point in use and  
the access point you created as the preferred  
connection. See also ‘Multimedia messages’, p. 53.  
Before you can send, receive, retrieve, reply to, and forward  
e-mail, you must do the following:  
E-mail messages are automatically placed in Outbox  
before sending. If sending does not succeed, the e-mail is  
left in the Outbox with the Failed status.  
Configure an IAP correctly. See ‘Connection’, p. 106.  
Define your e-mail settings correctly. If you select  
Mailbox in the Messag. main view and have not set up  
your e-mail account, you are prompted to do so. To  
start creating the e-mail settings with the mailbox  
guide, select Start. See also ‘E-mail’, p. 54.  
You must have a separate e-mail account. Follow the  
instructions given by your remote mailbox and internet  
service provider (ISP).  
Tip! You can combine images, video, sound, and text  
to a presentation and send it in a multimedia message.  
Start to create a multimedia message, and select  
Options > Create presentation. The option is shown  
only if MMS creation mode is set to Guided or Free.  
See ‘Multimedia messages’, p. 53.  
48  
 
When you open a multimedia message ( ), you may see  
an image and a message. is shown if sound is  
included, or if video is included. To play the sound or  
Inbox—receive messages  
the video, select the indicator.  
In the Inbox folder,  
indicates an unread text message,  
an unread multimedia message,  
data received  
To see the media objects that have been included in the  
multimedia message, select Options > Objects.  
through infrared, and  
connectivity.  
data received through Bluetooth  
If the message includes a multimedia presentation,  
displayed. To play the presentation, select the indicator.  
is  
When you receive a message,  
are shown in the standby mode. To open the message,  
select Show. To open a message in Inbox, press  
and 1 new message  
.
Data and settings  
Your device can receive many kinds of messages that  
To reply to a received message, select Options > Reply.  
To print a text or a multimedia message on a compatible  
basic print profile (BPP) equipped printer with Bluetooth  
connectivity (such as HP Deskjet 450 Mobile Printer or HP  
Photosmart 8150), select Options > Print.  
contain data (  
):  
Configuration message—You may receive settings from  
your service provider or company information  
management department in a configuration message. To  
save the settings, select Options > Save all.  
Multimedia messages  
Business card—To save the information to Contacts,  
select Options > Save business card. Certificates or  
sound files attached to the business card are not saved.  
Important: Exercise caution when opening  
messages. Multimedia message objects may contain  
malicious software or otherwise be harmful to your device  
or PC.  
Ringing tone—To save the ringing tone, select Options >  
Save.  
You may receive a notification that a multimedia message  
is waiting in the multimedia message center. To start a  
packet data connection to retrieve the message to your  
device, select Options > Retrieve.  
Operat. logo—To have the logo shown in the standby  
mode instead of the service provider’s own identification,  
select Options > Save.  
49  
       
Calen. entry—To save the invitation, select Options >  
When you create a new mailbox, the name you give to the  
mailbox replaces Mailbox in the Messaging main view.  
You can have up to six mailboxes.  
Save to Calendar.  
Web message—To save the bookmark to the bookmarks  
listed in web, select Options > Add to bookmarks. If the  
message contains both access point settings and  
Open the mailbox  
When you open the mailbox, the device asks if you want to  
bookmarks, to save the data, select Options > Save all.  
connect to the mailbox (Connect to mailbox?).  
E-mail notif.—The note tells you how many new e-mails  
you have in your remote mailbox. An extended  
notification may list more detailed information.  
To connect to your mailbox and retrieve new e-mail  
headings or messages, select Yes. When you view  
messages online, you are continuously connected to a  
remote mailbox using a data connection. See also  
‘Connection’, p. 106.  
Web service messages  
Web service messages ( ) are notifications (for  
example, news headlines) and may contain a text message  
or a link. For availability and subscription, contact your  
service provider.  
To view previously retrieved e-mail messages offline, select  
No. When you view e-mail messages offline, your device is  
not connected to the remote mailbox.  
Retrieve e-mail messages  
If you are offline, select Options > Connect to start a  
connection to the remote mailbox.  
Mailbox  
If you select Mailbox and have not set up your e-mail  
account, you are prompted to do so. To start creating the  
e-mail settings with the mailbox guide, select Start. See  
also ‘E-mail’, p. 54.  
Important: Exercise caution when opening  
messages. E-mail messages may contain malicious  
software or otherwise be harmful to your device or PC.  
1 When you have an open connection to a remote  
mailbox, select Options > Retrieve e-mail and one of  
the following:  
50  
       
New—to retrieve all new e-mail messages  
Selected—to retrieve only the e-mail messages that  
have been marked  
You can also receive meeting requests in the mailbox. See  
‘Meeting requests’, p. 74, and ‘Create calendar entries’,  
p. 74.  
All—to retrieve all messages from the mailbox  
To stop retrieving messages, select Cancel.  
2 After you retrieve the e-mail messages, you can  
continue viewing them online, or select Options >  
Disconnect to close the connection and view the  
e-mail messages offline.  
To print an e-mail message on a compatible basic print  
profile (BPP) equipped printer with Bluetooth connectivity  
(such as HP Deskjet 450 Mobile Printer or HP Photosmart  
8150), select Options > Print.  
Retrieve e-mail messages automatically  
E-mail status indicators are as follows:  
The new e-mail (offline or online mode) has not  
been retrieved to your device.  
The new e-mail has been retrieved to your device.  
The e-mail message has been read, and it has not  
been retrieved to your device.  
The e-mail message has been read.  
The e-mail heading has been read and the message  
content has been deleted from the device.  
To retrieve messages automatically, select Options >  
E-mail settings > Automatic retrieval > Header  
retrieval > Always enabled or Only in home net., and  
define when and how often the messages are retrieved.  
Setting the device to retrieve e-mail automatically may  
involve the transmission of large amounts of data through  
your service provider's network. Contact your service  
provider for information about data transmission charges.  
3 To open an e-mail message, press  
. If the e-mail  
Delete e-mail messages  
message has not been retrieved and you are offline, you  
are asked if you want to retrieve this message from the  
mailbox.  
To delete the contents of an e-mail message from the  
device while still retaining it in the remote mailbox, select  
Options > Delete. In Delete msg. from:, select Phone  
only.  
To view e-mail attachments, open a message that has the  
attachment indicator , and select Options >  
Attachments. If the attachment has a dimmed indicator,  
it has not been retrieved to the device; select Options >  
Retrieve.  
The device mirrors the e-mail headings in the remote  
mailbox. Although you delete the message content, the  
e-mail heading stays in your device. If you want to remove  
51  
     
the heading as well, you must delete the e-mail message  
from your remote mailbox; then make a connection from  
your device to the remote mailbox again to update the  
status.  
1 In the Messag. main view, select Options > SIM  
messages.  
2 Select Options > Mark/Unmark > Mark or Mark all to  
mark messages.  
3 Select Options > Copy. A list of folders opens.  
4 To start copying, select a folder and OK. To view the  
messages, open the folder.  
To delete an e-mail from the device and the remote  
mailbox, select Options > Delete. In Delete msg. from:,  
select Phone and server.  
If you are offline, the e-mail is deleted first from your  
device. During the next connection to the remote mailbox,  
it is automatically deleted from the remote mailbox. If you  
are using the POP3 protocol, messages marked to be  
deleted are removed only after you have closed the  
connection to the remote mailbox.  
Messaging settings  
Fill in all fields marked with Must be defined or with a red  
asterisk. Follow the instructions given by your service  
provider. You may also obtain settings from your service  
provider in a configuration message.  
To cancel deleting an e-mail from the device and server,  
scroll to an e-mail that has been marked to be deleted  
during the next connection ( ), and select Options >  
Restore.  
Some or all message centers or access points may be preset  
for your device by your service provider, and you may not  
be able to change, create, edit, or remove them.  
Text messages  
Disconnect from the mailbox  
When you are online, to end the data connection to the  
remote mailbox, select Options > Disconnect.  
Press  
, and select Messag. > Options > Settings >  
Text msg. and from the following:  
Message centres—View a list of all text message centers  
that have been defined.  
View messages on a SIM card  
Before you can view SIM messages, you must copy them  
to a folder in your device.  
Character encoding— To use character conversion to  
another encoding system when available, select Reduced  
support.  
52  
     
Msg. centre in use—Select which message center is used  
MMS creation mode —If you select Guided, the device  
informs you if you try to send a message that may not be  
supported by the recipient. Select Restricted; the device  
prevents you from sending messages that may not be  
supported.  
to deliver text messages.  
Receive report—Select whether the network sends  
delivery reports on your messages (network service).  
Message validity—Select how long the message center  
resends your message if the first attempt fails (network  
service). If the recipient cannot be reached within the  
validity period, the message is deleted from the message  
center.  
Access point in use—Select which access point is used as  
the preferred connection for the multimedia message  
center.  
Multimedia retrieval—Select how you want to receive  
multimedia messages. To receive multimedia messages  
automatically in your home network, select Auto. in  
home network. Outside your home network, you receive a  
notification that there is a multimedia message that you  
can retrieve in the multimedia message center.  
Message sent as—Change this option only if you are sure  
that your message center is able to convert text messages  
into these other formats. Contact your service provider.  
Preferred conn.—Select the connection used for sending  
text messages: GSM network or packet data, if supported  
by the network. See ‘Connection’, p. 106.  
When you are outside your home network, sending and  
receiving multimedia messages may cost you more.  
Reply via same ctr.—Select whether you want the reply  
message to be sent using the same text message center  
number (network service).  
If you select Multimedia retrieval > Always automatic,  
your device automatically makes an active packet data  
connection to retrieve the message both in and outside  
your home network.  
Multimedia messages  
Allow anon. msgs.—Select whether you want to reject  
messages from an anonymous sender.  
Press  
, and select Messag. > Options > Settings >  
Multimedia message and from the following:  
Receive adverts—Define whether you want to receive  
multimedia message advertisements.  
Image size—Define the size of the image in a multimedia  
message: Original (shown only when the MMS creation  
mode is set to Guided or Free), Small, or Large.  
53  
 
Receive report—Select whether you want the status of  
the sent message to be shown in the log (network service).  
Receiving a delivery report of a multimedia message that  
has been sent to an e-mail address may not be possible.  
Connection settings  
To edit the settings for the e-mail you receive, select  
Incoming e-mail and from the following:  
User name—Enter your user name, given to you by your  
service provider.  
Deny report sending—Select whether you want to  
prevent your device from sending delivery reports of  
received multimedia messages.  
Password—Enter your password. If you leave this field  
blank, you are prompted for the password when you try to  
connect to your remote mailbox.  
Message validity—Select how long the message center  
resends your message if the first attempt fails (network  
service). If the recipient cannot be reached within the  
validity period, the message is deleted from the message  
center.  
Incoming mail serv.—Enter the IP address or host name of  
the mail server that receives your e-mail.  
Access point in use—Select an IAP. See ‘Connection’,  
p. 106.  
E-mail  
Mailbox name—Enter a name for the mailbox.  
Press  
, and select Messag. > Options > Settings >  
Mailbox type—Defines the e-mail protocol that your  
remote mailbox service provider recommends. The options  
are POP3 and IMAP4. This setting can be selected only  
once and cannot be changed if you have saved or exited  
from the mailbox settings. If you use the POP3 protocol,  
e-mail messages are not updated automatically when you  
are online. To see the latest e-mail messages, you must  
disconnect and make a new connection to your mailbox.  
E-mail and from the following:  
Mailboxes—Select a mailbox to change the following  
settings: Connection settings, User settings, Retrieval  
settings, and Automatic retrieval.  
Mailbox in use— Select which mailbox you want to use  
for sending e-mail.  
To create a new mailbox, select Options > New mailbox  
in the mailbox main view.  
Security (ports)—Select the security option used to secure  
the connection to the remote mailbox.  
Port—Define a port for the connection.  
54  
   
APOP secure login (for POP3 only)—Use with the POP3  
protocol to encrypt the sending of passwords to the  
remote e-mail server while connecting to the mailbox.  
Send copy to self—Select whether you want to save a  
copy of the e-mail to your remote mailbox and to the  
address defined in My e-mail address.  
To edit the settings for the e-mail you send, select  
Outgoing e-mail and from the following:  
Include signature—Select whether you want to attach a  
signature to your e-mail messages.  
My e-mail address—Enter the e-mail address given to you  
by your service provider. Replies to your messages are sent  
to this address.  
New e-mail alerts—Select whether you want to receive  
the new e-mail indications, a tone and a note, when new  
Outgoing mail serv.—Enter the IP address or host name of  
the mail server that sends your e-mail. You may only be  
able to use the outgoing server of your service provider.  
Contact your service provider for more information.  
Default encoding—Select another encoding according to  
language.  
Retrieval settings  
E-mail to retrieve—Define which parts of the e-mail are  
retrieved: Headers only, Size limit, or Msgs. & attachs..  
Access point in use—Select an IAP. See ‘Connection’,  
p. 106.  
Retrieval amount—Define how many new e-mail  
messages are retrieved to the mailbox.  
The settings for User name, Password, Security (ports),  
and Port are similar to the ones in Incoming e-mail.  
IMAP4 folder path (for IMAP4 only)—Define the folder  
path for folders to be subscribed.  
User settings  
My name—Enter your own name. Your name replaces your  
e-mail address in the recipient’s device when the  
recipient’s device supports this function.  
Folder subscriptions (for IMAP4 only)—Subscribe to other  
folders in the remote mailbox and retrieve content from  
those folders.  
Send message—Define how e-mail is sent from your  
device. Select Immediatelyfor the device to connect to the  
mailbox when you select Send message. If you select  
During next conn., e-mail is sent when the connection to  
the remote mailbox is available.  
Automatic retrieval  
Header retrieval—Select whether you want the device to  
retrieve new e-mail automatically. You can define when,  
and how often, the messages are retrieved.  
55  
Setting the device to retrieve e-mail automatically may  
involve the transmission of large amounts of data through  
your service provider's network. Contact your service  
provider for information about data transmission charges.  
Other settings  
Press  
, and select Messaging > Options > Settings >  
Other and from the following:  
Save sent messages—Select whether you want to save a  
copy of the text messages, multimedia messages, or e-mail  
that you send to the Sent folder.  
Web service messages  
Press  
, and select Messaging > Options > Settings >  
No. of saved msgs.—Define how many sent messages are  
saved to the Sent folder at a time. The default limit is 20  
messages. When the limit is reached, the oldest message is  
deleted.  
Service message. Select whether you want to receive  
service messages. If you want to set the device to  
automatically activate the browser and start a network  
connection to retrieve content when you receive a service  
message, select Download messages > Automatically.  
Memory in use—If a compatible memory card is inserted  
in the device, select Phone memory or Memory card to  
save your messages.  
Cell broadcast  
Check the available topics and related topic numbers with  
your service provider. Press  
Options > Settings > Cell broadcast and from the  
following:  
, and select Messaging >  
Reception—Select whether you want to receive cell  
broadcast messages.  
Language—Select the languages in which you want to  
receive messages: All, Selected, or Other.  
Topic detection—Select whether the device  
automatically searches for new topic numbers, and saves  
the new numbers without a name to the topic list.  
56  
 
Make calls  
You must copy the contacts from your SIM card to  
Contacts before you can make a call this way. See ‘Copy  
contacts’, p. 68.  
Voice calls  
Tip! To increase or decrease the volume during a call,  
press  
or  
. If you have set the volume to Mute,  
or keys.  
To call your voice mailbox (network service), press and  
you can still adjust the volume with the  
hold  
in the standby mode. See also ‘Call divert’, p. 112.  
You can make voice calls in the fold-open mode and view  
mode. See ‘Modes’, p. 11.  
Tip! To change the phone number of your voice  
mailbox, press , and select Tools > Voice mail >  
Options > Change number. Enter the number  
(obtained from your service provider), and select OK.  
1 To start a voice call, with the fold open, enter the phone  
number in the standby mode, including the area code.  
To remove a number, press  
For international calls, press  
.
To call a recently dialed number in the standby mode,  
twice for the +  
press  
. Scroll to the number you want, and press  
character (replaces the international access code), and  
enter the country code, area code (omit the leading  
zero if necessary), and phone number.  
to call the number.  
Make a conference call  
1 Make a call to the first participant.  
2 To make a call to another participant, select Options >  
New call. The first call is automatically put on hold.  
3 When the new call is answered, to join the first  
participant in the conference call, select Options >  
Conference.  
2 Press  
to call the number.  
or close the cover to end the call (or to  
3 Press  
cancel the call attempt).  
Pressing  
always ends a call, even if another  
application is active.  
To make a call from Contacts, press , and select  
Contacts. Scroll to the desired name, or enter the first  
letters of the name to the search field. Matching contacts  
To add a new person to the call, repeat step 2, and  
select Options > Conference > Add to conference.  
are listed. To call, press  
. Select the call type Voice call.  
57  
           
Your device supports conference calls between a  
maximum of six participants, including yourself.  
To have a private conversation with one of the  
participants, select Options > Conference > Private.  
Select a participant, and select Private. The  
conference call is put on hold on your device. The other  
participants can still continue the conference call.  
When you finish the private conversation, select  
Options > Add to conference to return to the  
conference call.  
Voice dialing  
Your device supports enhanced voice commands.  
Enhanced voice commands are not dependent on the  
speaker’s voice; you do not record voice tags in advance.  
Instead, the device creates a voice tag for the entries in  
contacts, and compares the spoken voice tag to it. The  
voice recognition in the device adapts to the main user’s  
voice to recognize the voice commands better.  
The voice tag for a contact is the name or nickname that is  
saved on the contact card. To listen to the synthesized  
voice tag, open a contact card, and select Options > Play  
voice tag.  
To drop a participant, select Options > Conference >  
Drop participant, scroll to the participant, and select  
Drop.  
4 To end the active conference call, press  
.
Make a call with a voice tag  
Note: Using voice tags may be difficult in a noisy  
environment or during an emergency, so you should not  
rely solely upon voice dialing in all circumstances.  
Speed dial a phone number  
To activate speed dialing, press , and select Tools >  
Settings > Call > Speed dialling > On.  
When you use voice dialing, the loudspeaker is in use. Hold  
the device at a short distance away when you say the voice  
tag.  
To assign a phone number to one of the speed dialing keys  
(
), press , and select Tools > Spd. dial. Scroll  
to the key to which you want to assign the phone number,  
1 To start voice dialing, in the standby mode, press and  
and select Options > Assign.  
mailbox.  
is reserved for the voice  
hold  
. If you are using a compatible headset with  
the headset key, press and hold the headset key to start  
voice dialing.  
To call in the standby mode, press the speed dial key and  
.
58  
         
2 A short tone is played, and Speak now is displayed. Say  
clearly the name or nickname that is saved on the  
contact card.  
3 The device plays a synthesized voice tag for the  
recognized contact in the selected device language,  
and displays the name and number. After a timeout of  
2.5 seconds, the device dials the number.  
If the recognized contact was not correct, select Next  
to view a list of other matches, or Quit to cancel voice  
dialing.  
To be able to make a video call, you must have a USIM card  
and be in the coverage of a UMTS network. For availability  
of and subscription to video call services, contact your  
service provider. A video call can only be made between  
two parties. The video call can be made to a compatible  
mobile phone or an ISDN client. Video calls cannot be  
made while there is another voice, video, or data call  
active.  
Icons:  
You are not receiving video (the recipient is not  
sending video or the network is not transmitting it).  
You have denied video sending from your device. To  
send a still image instead, see ‘Call settings’, p. 105.  
If several numbers are saved under the name, the device  
selects the default number, if it has been set. Otherwise  
the device selects the first available number of the  
following: Mobile, Mobile (home), Mobile (business),  
Telephone, Tel. (home), and Tel. (business).  
1 To start a video call, with the fold open, enter the  
phone number in the standby mode, or select Contacts  
and a contact.  
2 Select Options > Video call.  
Video calls  
You can make video calls in the fold-open mode and view  
mode. See ‘Modes’, p. 11.  
If you want to make a hands-free video call, activate the  
view mode after the call recipient has answered the call.  
Starting a video call may take a while. Waiting for video  
image is shown. If the call is not successful (for example,  
video calls are not supported by the network, or the  
receiving device is not compatible) you are asked if you  
want to try a normal call or send a message instead.  
For hands-free video calls, use the view mode.  
When you make a video call, you can see a real-time,  
two-way video between you and the recipient of the call.  
The live video image, or video image captured by the  
camera in your device is shown to the video call recipient.  
The video call is active when you see two video images,  
and hear the sound through the loudspeaker. The call  
59  
   
recipient may deny video sending (  
hear the sound and may see a still image or a grey  
background graphic.  
), in which case you  
accepts the invitation, and you activate the correct mode.  
See ‘Share video’, p. 61.  
Video sharing requirements  
Tip! To increase or decrease the volume during a call,  
press  
or  
.
Because Video sharing requires a 3G UMTS connection,  
your ability to use Video sharing depends on 3G network  
availability. Contact your service provider for questions  
about network availability and fees associated with using  
this application. To use Video sharing you must do the  
following:  
To change between showing video or hearing only sound,  
select Enable or Disable> Sending video, Sending audio,  
or Sending audio & video.  
To zoom your own image, select Zoom in or Zoom out.  
The zoom indicator is shown on the top of the display.  
Ensure that Video sharing is installed on your Nokia  
N93.  
Ensure that your device is set up for person-to-person  
connections. See ‘Settings’, p.61.  
Ensure you have an active UMTS connection and are  
within UMTS network coverage. See ‘Settings’, p. 61. If  
you start the sharing session while you are within  
UMTS network coverage and a handover to GSM  
occurs, the sharing session is discontinued, but your  
voice call continues.  
To switch the places of the sent and received video images  
on the display, select Change image order.  
Even if you have denied video sending during a video call,  
the call will still be charged as a video call. Check the  
pricing with your service provider.  
To end the video call, press  
.
Video sharing  
Use Video sharing (network service) to send live video or  
a video clip from your mobile device to another  
compatible mobile device during a voice call. Simply invite  
a recipient to view the live video, or a video clip you want  
to share. Sharing begins automatically when the recipient  
Ensure that both the sender and recipient are  
registered to the UTMS network. If you invite someone  
to a sharing session and that person’s phone is turned  
off, or the person is not within UMTS network coverage,  
they do not know that you are sending an invitation.  
However, you receive an error message that the  
recipient cannot accept the invitation.  
60  
 
Ensure that your device UMTS access point connection  
settings are configured properly. For help, see  
‘Connection’, p. 106.  
Settings  
Person-to-person connection settings  
A person-to-person connection is also known as a session  
initiation protocol (SIP) connection. The SIP profile settings  
must be configured in your device before you can use  
Video sharing. Setting up a SIP profile allows you to  
establish a live person-to-person connection to another  
compatible phone. The SIP profile must also be established  
to receive a sharing session.  
Share video  
To receive a sharing session, the recipient must install  
Video sharingand configure the required settings on their  
mobile device. You and the recipient must both be  
registered to the service before you can start sharing.  
To receive share invitations, you must be registered to the  
service, have an active UMTS connection, and be within  
the UMTS network coverage.  
Ask your service provider for the SIP profile settings, and  
save them in your device. Your service provider may send  
you the settings over the air.  
Live video  
If you know a recipient’s SIP address, you can enter it on  
your contact card for that person. Open Contacts from  
your device main menu, and open the contact card (or start  
a new card for that person). Select Options > Add detail  
> SIP. Enter the SIP address in the format  
1 When a voice call is active, select Options > Share  
video > Live.  
2 The device sends the invitation to the SIP address you  
have added to the contact card of the recipient.  
If the recipient has several SIP addresses in the contact  
card, select the SIP address to which you want to send  
the invitation, and Select to send the invitation.  
If the SIP address of the recipient is not available, enter  
a SIP address. Select OK to send the invitation.  
3 Sharing begins automatically when the recipient  
accepts the invitation.  
sip:username@domainname (you can use an IP address  
instead of a domain name).  
UTMS connection settings  
To set up your UMTS connection, do the following:  
Contact your service provider to establish an  
agreement for you to use the UMTS network.  
61  
   
The loudspeaker is active. You can also use a  
compatible headset to continue your voice call while  
you share live video.  
5 Select Pause to pause the sharing session. Select  
Options > Continue to resume sharing.  
6 To end the sharing session, select Stop. To end the voice  
4 Select Pause to pause the sharing session. Select  
call, press  
.
Continue to resume sharing.  
5 To end the sharing session, select Stop. To end the  
Accept an invitation  
voice call, press  
.
When someone sends you a share invitation, an invitation  
message is displayed showing the sender’s name or SIP  
address. If your device is not set to Silent, it rings when  
you receive an invitation.  
Video clip  
1 When a voice call is active, select Options > Share  
video > Clip.  
A list of video clips opens.  
If someone sends you a share invitation and you are not  
within UMTS network coverage, you will not know that  
you received an invitation.  
2 Select a video clip you want to share. A preview view  
opens. To preview the clip, select Options > Play.  
3 Select Options > Invite.  
When you receive an invitation, you can select:  
You may need to convert the video clip into a suitable  
format to be able to share it. Clip must be converted  
for sharing. Continue? appears. Select OK.  
The device sends the invitation to the SIP address you  
have added to the contact card of the recipient.  
If the recipient has several SIP addresses in the contact  
card, select the SIP address to which you want to send  
the invitation, and Select to send the invitation.  
If the SIP address of the recipient is not available,  
enter a SIP address. Select OK to send the invitation.  
4 Sharing begins automatically when the recipient  
accepts the invitation.  
Accept—to begin the sharing session. If the sender wants  
to share live video, activate the view mode.  
Reject—to decline the invitation. The sender receives a  
message that you rejected the invitation. You can also  
press  
to decline the sharing session and disconnect  
the voice call.  
To end the sharing session, select Stop. If you share a video  
clip, select Exit. Video sharing ended is displayed.  
62  
Tip! You can assign a ringing tone for video calls.  
Answer or reject a call  
Press  
and select Tools > Profiles, a profile, and  
To answer the call in the fold-open mode, press  
. If  
Options > Personalise > Video call tone.  
Answer if fold opened is set to On, to answer a call in the  
fold-closed mode, open the fold, and the call starts  
In the fold-open mode, press  
to answer the video call.  
To start sending video, activate the view mode, and a live  
video image, recorded video clip, or the image being  
captured by the camera in your device is shown to the  
caller. If you want to send a live video image, turn the  
camera unit to the direction from which you want to send  
the video image. If you do not activate the view mode,  
video sending is not possible, but you can still hear the  
other person. A grey screen is shown in place of the video.  
To replace the grey screen with a still image, see ‘Call  
settings’, Image in video call, p. 105.  
automatically. Otherwise, open the fold, and press  
.
To mute the ringing tone when a call comes in, select  
Silence.  
Tip! If a compatible headset is connected to the  
device, to answer and end a call, press the headset key.  
If you do not want to answer a call, in the fold-open mode,  
press  
to reject it. The caller hears a line busy tone. If  
you have activated the Call divert > If busy function to  
divert calls, rejecting an incoming call also diverts the call.  
See ‘Call divert’, p. 112.  
Even if you have denied video sending during a video call,  
the call is still charged as a video call. Check the pricing  
with your service provider.  
When you reject an incoming call with the fold open, you  
can also send a text message to the caller informing why  
you cannot answer the call. Select Options > Send msg..  
You can edit the text before sending it. To set up this  
option and write a standard text message, see ‘Call  
settings’, p. 105.  
To end the video call, in the view mode or with the fold  
open, press  
.
Call waiting  
You can answer a call while you have another call in  
progress if you have activated Call waiting (network  
service) in Tools > Settings > Call > Call waiting.  
Answer or reject a video call  
When a video call arrives,  
is displayed.  
63  
     
To answer the waiting call, press  
on hold.  
. The first call is put  
Tip! You can add DTMF tones to the Phone number  
or DTMF fields in a contact card.  
To switch between the two calls, select Swap. Select  
Options > Transfer to connect an incoming call or a call  
on hold with an active call and to disconnect yourself  
Options during a video call  
Select Options during a video call for the following  
options:  
from the calls. To end the active call, press  
. To end  
both calls, select Options > End all calls.  
Enable or Disable (audio in the fold-open mode; video,  
audio, or both in view mode).  
Options during a voice call  
Many of the options that you can use during a voice call  
are network services. Select Options during a call for the  
available options on your device, including the following:  
Activate handset (if a headset with Bluetooth  
connectivity is attached).  
Activate handsfree (fold-open mode only, and if a  
compatible headset with Bluetooth connectivity is  
attached).  
Replace—To end an active call and replace it by answering  
the waiting call.  
End active call  
Send MMS (in UMTS networks only)—To send an image or  
a video in a multimedia message to the other participant  
of the call. You can edit the message and change the  
Change image order  
Zoom in or Zoom out (view mode only).  
recipient before sending. Press  
compatible device.  
to send the file to a  
Log  
Send DTMF—To send DTMF tone strings, for example, a  
password. Enter the DTMF string or search for it in  
Contacts. To enter a wait character (w) or a pause  
character (p), press  
tone.  
repeatedly. Select OK to send the  
Recent calls  
To monitor the phone numbers of missed, received, and  
dialed calls, press , and select My own > Log > Recent  
64  
           
calls. The device registers missed and received calls only if  
the network supports these functions, the device is  
switched on, and within the network service area.  
To clear call duration timers, select Options > Clear  
timers. For this you need the lock code; see ‘Security’,  
‘Phone and SIM’, p. 109.  
Tip! When you see a note in the standby mode about  
missed calls, select Show to access the list of missed  
calls. To call back, scroll to a name or number, and press  
.
Packet data  
To check the amount of data sent and received during  
packet data connections, press , and select My own >  
Log > Packet data. For example, you may be charged for  
your packet data connections by the amount of data sent  
and received.  
To clear all recent call lists, select Options > Clear recent  
calls in the recent calls main view. To clear one of the call  
registers, open the register you want to erase, and select  
Options > Clear list. To clear an individual event, open a  
register, scroll to the event, and press  
.
Monitor all communication events  
Icons in Log:  
Call duration  
Incoming  
Outgoing  
Missed communication events  
To monitor the approximate duration of your incoming and  
outgoing calls, press , and select My own > Log > Call  
duration.  
To set the display of the call duration while a call is active,  
select Connect. > Log > Options > Settings > Show call  
duration > Yes or No.  
Note: The actual time invoiced for calls by your  
service provider may vary, depending on network  
features, rounding off for billing, and so forth.  
65  
   
To monitor all voice and video  
calls, text messages, or data  
connections registered by the  
device, press , select My  
To erase the contents of the log, recent calls register, and  
messaging delivery reports permanently, select Options >  
Clear log. Select Yes to confirm. To remove a single event  
from the log, press  
.
own > Log, and press  
to  
To set the Log duration, select Options > Settings > Log  
duration. The log events remain in the device memory for  
a set number of days after which they are automatically  
erased to free memory. If you select No log, all the log  
contents, recent calls register, and messaging delivery  
reports are permanently deleted.  
select the general log. For each  
communication event, you can  
see the sender or recipient  
name, phone number, name of  
the service provider, or access  
point. You can filter the  
general log to view just one  
type of event and create new contact cards based on the  
log information.  
To view the details of a communication event, in the  
general log view, scroll to an event, and press  
.
Tip! In the details view, to copy a phone number to  
the clipboard, select Options > Copy Number.  
Tip! To see the duration of a voice call on the main  
display during an active call, select Options > Settings  
> Show call duration > Yes.  
Packet data counter and connection timer: To view how  
much data, measured in kilobytes, is transferred and how  
long a certain packet data connection lasts, scroll to an  
incoming or outgoing event indicated by Pack., and select  
Options > View details.  
Tip! To view a list of sent messages, press , and  
select Messaging > Sent.  
Subevents, such as a text message sent in more than one  
part and packet data connections, are logged as one  
communication event. Connections to your mailbox,  
multimedia messaging center, or web pages are shown as  
packet data connections.  
To filter the log, select Options > Filter and a filter.  
66  
 
Contacts (phonebook)  
Press , and select Contacts. In Contacts you can add a  
personal ringing tone or a thumbnail image to a contact  
card. You can also create contact groups, which allow you  
to send text messages or e-mail to many recipients at the  
same time. You can add received contact information  
(business cards) to contacts. See ‘Data and settings’, p. 49.  
Contact information can only be sent to or received from  
compatible devices.  
Tip! To add and edit contact cards, use Nokia  
Contacts Editor available in Nokia PC Suite.  
To attach a small thumbnail image to a contact card, open  
the contact card, and select Options > Edit > Options >  
Add thumbnail. The thumbnail image is shown when the  
contact calls.  
Tip! Speed dialing is a quick way to call frequently  
used numbers. You can assign speed dialing keys to  
eight phone numbers. See ‘Speed dial a phone number’,  
p. 58.  
Save names and numbers  
1 Select Options > New contact.  
Tip! To send contact information, select the card you  
want to send. Select Options > Send > Via text  
message, Via multimedia, Via Bluetooth, or Via  
infrared. See ‘Messaging’, p. 44 and ‘Send data’, p. 85.  
2 Fill in the fields that you want, and select Done.  
To edit contact cards in Contacts, scroll to the contact  
card you want to edit, and select Options > Edit.  
To add a contact to a group, select Options > Add to  
group: (shown only if you have created a group). See  
‘Create contact groups’, p. 69.  
Tip! To print contact cards on a compatible basic print  
profile (BPP) equipped printer with Bluetooth  
connectivity (such as HP Deskjet 450 Mobile Printer or  
HP Photosmart 8150), select Options > Print.  
To view the amount of contacts, groups, and the available  
memory in Contacts, select Options > Contacts info.  
To delete a contact card in Contacts, select a card, and  
press . To delete several contact cards at the same time,  
press  
and  
to mark the contacts, and press to  
delete.  
67  
         
Tip! You can synchronize your contacts to a  
compatible PC with Nokia PC Suite.  
Default numbers and addresses  
You can assign default numbers or addresses to a contact  
card. In this way if a contact has several numbers or  
addresses, you can easily call or send a message to the  
contact to a certain number or address. The default  
number is also used in voice dialing.  
SIM directory and services  
For availability and information on using SIM card services,  
contact your SIM card vendor. This may be the service  
provider or other vendor.  
1 In the address book, select a contact, and press  
.
2 Select Options > Defaults.  
Press  
, and select Contacts > Options > SIM  
3 Select a default to which you want to add a number or  
contacts > SIM directory to see the names and numbers  
stored on the SIM card. In the SIM directory you can add,  
edit, or copy numbers to contacts, and you can make calls.  
an address, and select Assign.  
4 Select a number or an address you want to set as a  
default.  
To view the list of fixed dialing numbers, select Options >  
SIM contacts > Fixed dialling contacts. This setting is  
only shown if supported by your SIM card.  
The default number or address is underlined in the contact  
card.  
To restrict calls from your device to selected phone  
numbers, select Options > Activ. fixed dialling. To add  
new numbers to the fixed dialing list, select Options >  
New SIM contact. You need the PIN2 code for these  
functions.  
Copy contacts  
To copy names and numbers from a SIM card to your  
device, press  
, and select Contacts > Options > SIM  
contacts > SIM directory. Select the names you want to  
When you use Fixed dialling, packet data connections are  
not possible, except when sending text messages over a  
packet data connection. In this case, the message center  
number and the recipient’s phone number must be  
included on the fixed dialing list.  
copy and Options > Copy to Contacts.  
To copy contacts to your SIM card, press  
, and select  
Contacts. Select the names you want to copy and  
Options > Copy to SIM direct., or Options > Copy > To  
SIM directory. Only the contact card fields supported by  
your SIM card are copied.  
68  
     
When fixed dialing is activated, calls may be possible to  
the official emergency number programmed into your  
device.  
5 Scroll to a contact, and press  
to mark it. To add  
multiple members at a time, repeat this action on all  
the contacts you want to add.  
6 Select OK to add the contacts to the group.  
To rename a group, select Options > Rename, enter the  
Add ringing tones for contacts  
When a contact or group member calls you, the device  
plays the chosen ringing tone (if the caller’s telephone  
number is sent with the call and your device recognizes it).  
new name, and select OK.  
Remove members from a group  
1 In the groups list, open the group you want to modify.  
2 Scroll to the contact, and select Options > Remove  
from group.  
1 Press  
to open a contact card or go to the groups list,  
and select a contact group.  
2 Select Options > Ringing tone. A list of ringing tones  
opens.  
3 Select Yes to remove the contact from the group.  
3 Select the ringing tone you want to use for the  
Tip! To check to which groups a contact belongs,  
scroll to the contact, and select Options > Belongs to  
groups.  
individual contact or the selected group.  
To remove the ringing tone, select Default tone from the  
list of ringing tones.  
Create contact groups  
1 In Contacts, press  
to open the groups list.  
2 Select Options > New group.  
3 Write a name for the group or use the default name  
Group N, and select OK.  
4 Open the group, and select Options > Add members.  
69  
       
Services  
Various service providers maintain pages specifically  
designed for mobile devices. These pages use the wireless  
markup language (WML), extensible hypertext markup  
language (XHTML), or hypertext markup language (HTML).  
Enter settings manually  
1 Press , select Tools > Settings > Connection >  
Access points, and define the settings for an access  
point. Follow the instructions given to you by your  
service provider. See ‘Connection’, p. 106.  
Check the availability of services, pricing, and fees with  
your service provider. Service providers will also give you  
instructions on how to use their services.  
2 Press  
, and select Services > Options > Bookmark  
manager > Add bookmark. Write a name for the  
bookmark and the address of the page defined for the  
current access point.  
Press  
, and select Services.  
3 To set the created access point as the default access  
Shortcut: To start a connection, press and hold  
in the standby mode.  
point, select Options > Settings > Access point.  
Bookmarks view  
Web access point  
The bookmarks view opens when you open Services.  
To access pages, you need web service settings for the  
page that you want to use. You may receive the settings  
in a special text message from the service provider that  
offers the web page. See ‘Data and settings’, p. 49. For  
more information, contact your service provider.  
Your device may have some bookmarks loaded for sites not  
affiliated with Nokia. Nokia does not warrant or endorse  
these sites. If you choose to access them, you should take  
the same precautions, for security or content, as you would  
with any internet site.  
Tip! Settings may be available on the website of your  
service provider.  
indicates the starting page defined for the default  
access point.  
70  
         
On a browser page, new links appear underlined in blue  
and previously visited links in purple. Images that act as  
links have a blue border around them.  
Connection security  
If the security indicator  
is displayed during a  
connection, the data transmission between the device and  
the internet gateway or server is encrypted.  
To open links and make selections, press  
Shortcut: Press to jump to the end of a page,  
and to the beginning of a page.  
.
The security icon does not indicate that the data  
transmission between the gateway and the content server  
(or place where the requested resource is stored) is secure.  
The service provider secures the data transmission  
between the gateway and the content server.  
To go to the previous page while browsing, select Back. If  
Back is not available, select Options > Navigation  
options > History to view a chronological list of the pages  
you visited during a browsing session.  
Select Options > Details > Security to view details about  
the connection, encryption status, and information about  
server and user authentication.  
To retrieve the latest content from the server, select  
Options > Navigation options > Reload.  
To save a bookmark, select Options > Save as bookmark.  
Security certificates may be required for some services,  
such as banking services. For more information, contact  
your service provider. See also ‘Certificate management’,  
p. 110.  
Tip! To access the bookmarks view while browsing,  
press and hold  
. To return to the browser view,  
select Options > Back to page.  
To save a page while browsing, select Options >  
Advanced options > Save page. You can save pages to  
the device memory or a compatible memory card (if  
inserted), and browse them when offline. To access the  
Browse  
Important: Use only services that you trust and that  
offer adequate security and protection against harmful  
software.  
pages later, press  
in the bookmarks view to open the  
Saved pages view.  
To download a page, select a bookmark, or enter the  
address in the field ( ).  
To enter a new URL address, select Options > Navigation  
options > Go to web address.  
71  
   
You can download files that cannot be shown on the  
browser page, such as ringing tones, images, operator  
logos, themes, and video clips. To download an item, scroll  
Important: Only install and use applications and  
other software from trusted sources, such as applications  
that are Symbian Signed or have passed the Java  
VerifiedTM testing.  
to the link, and press  
.
When you start a download, a list of ongoing, paused, and  
completed downloads from the current browsing session  
is displayed. To view the list, select Options > Tools >  
Downloads. In the list, scroll to an item, and select  
Options to pause, resume, or cancel ongoing downloads,  
or open, save, or delete completed downloads.  
1 To download the item, scroll to the link, and press  
2 Select the appropriate option to purchase the item, for  
example, “Buy”.  
3 Carefully read all the information provided.  
To continue the download, select Accept. To cancel the  
download, select Cancel.  
.
Copyright protections may prevent some images, music  
(including ringing tones), and other content from being  
copied, modified, transferred or forwarded.  
End a connection  
To end the connection and view the browser page offline,  
select Options > Advanced options > Disconnect, or to  
end the connection and close the browser, select  
Options > Exit.  
Important: Only install and use applications and  
other software from trusted sources, such as applications  
that are Symbian Signed or have passed the Java  
VerifiedTM testing.  
Empty the cache  
The information or services you have accessed are stored in  
the cache memory of the device.  
Download and purchase items  
You can download items such as ringing tones, images,  
operator logos, themes, and video clips. These items can  
be provided free, or you can purchase them. Downloaded  
items are handled by the respective applications in your  
device, for example, a downloaded photo can be saved in  
Gallery.  
A cache is a memory location that is used to store data  
temporarily. If you have tried to access or have accessed  
confidential information requiring passwords, empty the  
cache after each use. The information or services you have  
72  
     
accessed are stored in the cache. To empty the cache,  
select Options > Advanced options > Clear cache.  
Search page—Define a web page that is downloaded  
when you select Navigation options > Open search page  
in the bookmarks view, or when browsing.  
Volume—If you want the browser to play sounds  
Web settings  
embedded on web pages, select a volume level.  
Select Options > Settings and from the following:  
Rendering—If you want the page layout shown as  
accurately as possible when in the Small screen mode,  
select By quality. If you do not want external cascading  
style sheets to be downloaded, select By speed.  
Access point—Change the default access point. See  
‘Connection’, p. 106. Some or all access points may be  
preset for your device by your service provider, and you  
may not be able to change, create, edit, or remove them.  
Cookies—Enable or disable the receiving and sending of  
cookies.  
Load imgs. & sounds—Select whether you want to load  
images while browsing. If you select No, to load images  
later during browsing, select Options > Show images.  
Java/ECMA script—Enable or disable the use of scripts.  
Security warnings—Hide or show security notifications.  
Font size—Select the text size.  
Conf. DTMF sending—Select whether you want to  
confirm before the device sends DTMF tones during a  
voice call. See also ‘Options during a voice call’, p. 64.  
Default encoding—If text characters are not shown  
correctly, you can select another encoding according to  
language.  
Auto. bookmarks—Enable or disable automatic bookmark  
collecting. If you want to continue collecting automatic  
bookmarks but hide the folder from the bookmarks view,  
select Hide folder.  
Screen size—Select what is shown when you are browsing:  
Select. keys only or Full screen.  
Homepage—Define the home page.  
73  
 
Calendar  
Use Calendar to remind you of meetings, anniversaries,  
and to keep track of your tasks and other notes.  
Anniversary—to remind you of birthdays or special  
dates (entries are repeated every year)  
To-do—to remind you of a task that needs doing by a  
specific date  
Create calendar entries  
2 Fill in the fields. To set an alarm, select Alarm > On,  
and enter the Alarm time and Alarm date.  
To add a description for an appointment or a meeting,  
select Options > Add description.  
Shortcut: In the day, week, or month calendar view,  
press any key (  
). An appointment entry opens,  
and the characters you enter are added to the Subject  
field. In the to-do view, a to-do note entry opens.  
3 To save the entry, select Done.  
When the calendar alarms for a note, select Silence to turn  
off the calendar alarm tone. The reminder text stays on the  
screen. To end the calendar alarm, select Stop. To set the  
alarm to snooze, select Snooze.  
1 Press  
, and select  
Calendar > Options >  
New entry and one of  
the following:  
Meeting—to remind you  
of an appointment that  
has a specific date and  
time  
Tip! You can synchronize your calendar with a  
compatible PC using Nokia PC Suite. When creating a  
calendar entry, set the desired Synchronisation option.  
Meeting request—to  
send a meeting request  
by e-mail (a mailbox  
must be defined in the  
device)  
Meeting requests  
If you receive a meeting request to the mailbox in your  
device, the request is saved to the calendar when you open  
the e-mail.  
Memo—to write a general entry for a day  
74  
         
You can view received meeting requests in the mailbox or  
in the calendar. To respond to a meeting request using  
e-mail, select Options > Respond:.  
Manage your calendar entries  
Deleting past entries in Calendar saves space in your  
device memory.  
To delete more than one event at a time, go to the month  
view, and select Options > Delete entry > Before date or  
All entries.  
Calendar views  
Tip! Select Options > Settings to change the starting  
day of the week or the view that is shown when you  
open the calendar.  
To mark a task as completed, scroll to it in the to-do view,  
and select Options > Mark as done.  
In the month view, dates that have calendar entries are  
marked with a small triangle in the bottom right corner. In  
the week view, memos and anniversaries are placed before  
8 a.m. To switch between the month view, week view, day  
Calendar settings  
To modify Calendar alarm tone, Default view, Week  
starts on, and Week view title, select Options >  
Settings.  
view, and to-do view, press  
To go to a certain date, select Options > Go to date. To  
jump to today, press  
.
.
To send a calendar note to a compatible device, select  
Options > Send.  
To print calendar entries on a compatible basic print profile  
(BPP) equipped printer with Bluetooth connectivity (such  
as HP Deskjet 450 Mobile Printer or HP Photosmart 8150),  
select Options > Print.  
75  
       
My own  
If you do not have access to the Visual Radio service, the  
operators and radio stations in your area may not support  
Visual Radio.  
Visual Radio  
You can use Visual Radio (network service) as  
a traditional FM radio with automatic tuning  
The FM radio depends on an antenna other than the  
wireless device antenna. A compatible headset or  
enhancement needs to be attached to the device for the  
FM radio to function properly.  
and saved stations. If you tune to stations that offer Visual  
Radio service, you can view visual information on the  
display related to the radio program. The Visual Radio  
service uses packet data (network service). You can listen  
to the FM radio while using other applications.  
You can listen to the radio with the built-in loudspeaker or  
a compatible headset. When using the loudspeaker, keep  
the headset plugged in the device. The lead of the headset  
functions as the antenna of the radio, so let it hang freely.  
To use the Visual Radio service, the following conditions  
are required:  
The device must be switched on.  
Warning: Listen to music at a moderate level.  
Continuous exposure to high volume may damage your  
hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be  
extremely loud.  
The device must have a valid SIM card inserted.  
The station you listen to and the network operator or  
the wireless service provider you use must support this  
service.  
An internet access point must be defined to access the  
service provider’s Visual Radio server. See ‘Access  
points’, p. 106.  
The station must have the correct Visual Radio service  
ID defined and Visual Radio service enabled. See  
‘Saved stations’, p. 78.  
You can make a call or answer an incoming call while  
listening to the radio. The radio is turned off when there is  
an active call. When the call is finished, the radio is turned  
back on.  
The radio selects the used frequency band based on the  
country information received from the network.  
76  
     
Visual Radio can be used for listening when the device  
cover is closed. Channel information may be displayed on  
the cover display. To mute or unmute the radio, press  
To save the current tuned  
station to your station list,  
select Options > Save  
.
station. To open the list of  
your saved stations, select  
Options > Stations. See  
‘Saved stations’, p. 78.  
Listen to the radio  
Note that the quality of the radio broadcast depends on  
the coverage of the radio station in that particular area.  
To return to the standby  
mode and leave the FM radio  
playing in the background,  
select Options > Play in  
Connect a compatible headset to the device. The lead of  
the headset functions as the radio antenna, so let it hang  
freely. Press  
, and select My own > Radio.  
background, or press  
.
To start a station search, select  
or . Searching  
stops when a station is found. To change the frequency  
manually, select Options > Manual tuning.  
View visual content  
To check availability and costs, and to subscribe to the  
service, contact your service provider.  
If you have previously saved radio stations, select  
to go to the next or previous saved station. To select  
the memory location of a station, press the corresponding  
number key.  
or  
To view available visual content for a tuned station, select  
, or in the stations view, select Options > Station >  
Start visual service. If the visual service ID has not been  
saved for the station, enter it, or select Retrieve to search  
for it in the station directory (network service).  
To adjust the volume, press  
or . To listen to the radio  
using the loudspeaker, select Options > Activate  
loudspeaker.  
To view available stations based on location, select  
Options > Station directory (network service).  
When the connection to the visual service is established,  
the display shows the current visual content designed by  
the content provider.  
77  
 
To adjust display settings for the visual content view,  
select Options > Display settings > Lighting or Power  
saver time-out.  
RealPlayer  
Press  
, and select My own > RealPlayer. With  
Saved stations  
You can save up to 20 radio stations in Visual Radio. To  
open your station list, select Options > Stations.  
RealPlayer, you can play video clips or stream media files  
over the air. You can activate a streaming link when you  
browse web pages, or store it in the device memory or a  
compatible memory card (if inserted).  
To listen to a saved station, select Options > Station >  
Listen. To view available visual content for a station with  
Visual Radio service, select Options > Station > Start  
visual service.  
Tip! You can also view video clips or streaming links in  
your device with other compatible UPnP devices, such  
as a TV or a PC, through wireless LAN. See ‘View media  
files’, p. 90.  
To change station details, select Options > Station >  
Edit.  
RealPlayer supports files with extensions such as .3gp,  
.mp4, or .rm. However, RealPlayer does not necessarily  
support all file formats or all the variations of file formats.  
For example, RealPlayer attempts to open all .mp4 files,  
but some .mp4 files may include content that is not  
compliant with 3GPP standards and, therefore, is not  
supported by this device.  
Settings  
Select Options > Settings and from the following:  
Start-up tone—To select whether a tone is played when  
the application is started.  
Auto-start service—To have the Visual Radio service start  
automatically when you select a saved station that offers  
visual service, select Yes.  
Play video clips  
1 To play a media file stored in device memory or on a  
compatible memory card (if inserted), select Options >  
Open and from the following:  
Access point—To select the access point used for the data  
connection. You do not need an access point to use the  
application as an ordinary FM radio.  
Most recent clips—to play one of the last six files  
played in RealPlayer  
78  
         
Saved clip—to play a file saved in Gallery  
begins streaming, your device connects to the site and  
starts loading the content. The content is not saved in  
your device.  
See ‘Gallery’, p. 30.  
2 Scroll to a file, and press  
to play the file.  
Tip! To view a video clip in full screen mode,  
Receive RealPlayer settings  
You may receive RealPlayer settings in a special text  
message from the service provider. See ‘Data and settings’,  
p. 49. For more information, contact your service provider.  
press  
. Press again to change back to normal screen  
mode.  
Shortcuts during play are as follows:  
To fast forward, press and hold  
To rewind through the media file, press and hold  
To mute the sound, press and hold until is  
displayed. To turn on the sound, press and hold  
until you see  
.
.
Change the RealPlayer settings  
Select Options > Settings and from the following:  
Video—to have RealPlayer automatically repeat video  
clips after they finish playing  
.
Stream content over the air  
Many service providers require you to use an IAP for your  
default access point. Other service providers allow you to  
use a WAP access point.  
Connection—to select whether to use a proxy server,  
change the default access point, and set the port range  
used when connecting. Contact your service provider for  
the correct settings.  
Proxy sett.:  
The access points may be configured when you first start  
your device.  
Use proxy—To use a proxy server, select Yes.  
Contact your service provider for more information.  
Proxy serv. address—Enter the IP address of the proxy  
server.  
In RealPlayer, you can only open an rtsp:// URL address.  
However, RealPlayer recognizes an http link to a .ram file. Proxy port number—Enter the port number of the proxy  
server.  
To stream content over the air, select a streaming link  
saved in Gallery, on a web page, or received in a text  
message or multimedia message. Before live content  
Glossary: Proxy servers are intermediate servers between  
media servers and their users. Some service providers  
79  
 
use them to provide additional security or speed up  
access to browser pages that contain sound or video  
clips.  
To open a folder or play a flash file, scroll to it, and press  
.
To send a flash file to a compatible device, scroll to it, and  
Netw. sett.—  
press  
.
Default access point—Scroll to the access point you  
want to use to connect to the internet, and press  
Online time—Set the time for RealPlayer to  
To copy a flash file to another folder, select Organise >  
.
Copy to folder.  
To move a flash file to another folder, select Organise >  
Move to folder  
disconnect from the network when you pause a media  
clip playing through a network link. Select User  
defined, and press  
. Enter the time, and select OK. To create a folder to organize your flash files, select  
Lowest UDP port—Enter the lowest port number of  
the server’s port range. The minimum value is 1024.  
Highest UDP port—Enter the highest port number of  
the server’s port range. The maximum value is 65535.  
Organise > New folder.  
The available options may vary.  
To delete a flash file, scroll to it, and press  
.
Select Options > Advanced settings to edit the  
bandwidth values for different networks.  
Play flash files  
Press  
flash file, and press  
, and select My own > Flash Player. Scroll to a  
.
Flash Player  
Select Options and from the following:  
Pause—Pause the playback  
With Flash Player, you can view, play, and interact with  
flash files made for mobile devices.  
Stop—Stop the playback  
Volume—Adjust the playback volume. To increase or  
decrease the volume scroll left or right  
Organize flash files  
Press  
, and select My own > Flash Player.  
80  
 
Quality—Select the playback quality. If the playback  
appears uneven and slow, change the Quality setting to  
Normal or Low.  
select Options > Create muvee; or open the Images &  
video folder in Gallery. Select the video clips and  
images you with which you want to create a muvee,  
and select Options > Edit > Create muvee.  
2 Select a style for the muvee from the style list. Movie  
director uses the music and text associated with the  
chosen style.  
Full screen —Play the file using the entire display. To  
return to the normal screen, select Normal screen. Even  
though not visible in full screen, the key functions may still  
be available when you press either key below the display.  
3 Select Create muvee.  
Fit to screen—Play the file in its original size after  
zooming it  
The muvee is created automatically, and a Preview view is  
displayed. You can select Save to save the muvee in the  
Gallery, Recreate to shuffle the media files and create a  
new muvee, or Back to select a different style for your  
muvee. You can also select Customise to change the  
muvee settings and create a custom muvee to which you  
can add images, music, and text.  
Pan mode on—Move around the display with the scroll key  
when you have zoomed in  
The available options may vary.  
Movie director  
Create a custom muvee  
Press  
, and select My own > Movie, or launch it from  
1 In the Movie director main view, select the videos and  
images with which you want to create a muvee, and  
select Options > Create muvee; or select the Images  
& video folder in Gallery. Select the videos and images  
with which you want to create a muvee, and select  
Options > Edit > Create muvee.  
the gallery. Muvees are styled video clips that can contain  
videos, images, music, and text. The style determines the  
transitions, visual effects, graphics, music, and text that  
are used in the muvee.  
2 Select a style for the muvee from the style list. In the  
style view, select Options > Customise and from the  
following:  
Create muvees  
1
In the Movie director main view, select the videos and  
images with which you want to create a muvee, and  
Videos & Images—select from the following:  
81  
   
Add/Remove—Add or remove video clips and  
images or Add/Remove > Capture to open the  
camera application to capture new video clips and  
images  
Move—Reorder the position of video clips and  
images in the custom muvee  
gallery, Recreate to shuffle the media files and create a  
new muvee, or Customise to return to the muvee settings.  
Games  
Press  
, and select My own and a game. For instructions  
Select contents—Select video segments to include  
or exclude in the muvee  
on how to play the game, select Options > Help.  
Length—to define the duration of the muvee, select  
User defined. Select Multimedia message, Same as  
music or Auto-select. If the muvee duration is less  
than the music duration, the muvee is repeated to  
match the music duration. If the muvee duration is  
longer than the music duration, the music is repeated  
to match the muvee duration.  
Music—to select a music clip from the list.  
Message—to edit the Opening message and Closing  
message.  
Settings—to change the settings for muvee  
production. Select from the following:  
Memory in use—Select where to store your muvees  
Resolution—Select the resolution of your muvees  
Default muvee name—Set a default name for the  
muvees  
3 Select Create muvee.  
The muvee is created automatically, and Preview  
displayed. You can select Save to save the muvee in the  
82  
 
Connectivity  
PC connections  
Data cable  
You need to connect your device to a compatible PC to do  
the following:  
Press  
, and select Connect. > Data cbl. > Media  
Transfer information between Nokia PC Suite  
applications and your device. For example, to  
synchronize calendar appointments or transfer images.  
Use your device as a modem to connect to network  
services such as the internet.  
player, PC Suite, Mass storage, or Image print. To have  
the device ask the purpose of the connection each time  
the cable is connected, select Ask on connection.  
Bluetooth connectivity  
You can connect your device and a compatible PC via a  
compatible USB or serial cable, Infrared, or Bluetooth  
wireless technology.  
You can connect wirelessly to other compatible devices  
with wireless Bluetooth technology. Compatible devices  
may include mobile phones, computers, and  
Detailed installation instructions can be found in the user  
guide for Nokia PC Suite.  
enhancements such as headsets and car kits. You can use  
Bluetooth connectivity to send images, video clips, music  
and sound clips, and notes; connect wirelessly to your  
compatible PC (for example, to transfer files); and connect  
to a compatible printer to print images with Image print.  
See ‘Image print’, p. 42.  
Tip! When using Nokia PC Suite for the first time, to  
connect your device to a compatible PC and to use  
Nokia PC Suite, use the Get Connected wizard available  
in Nokia PC Suite.  
Since devices with Bluetooth technology communicate  
using radio waves, your device and the other device do not  
need to be in direct line-of-sight. The two devices only  
83  
           
need to be within 10 meters (33 feet) of each other, but  
the connection may be subject to interference from  
obstructions such as walls or from other electronic  
devices.  
features, increase the demand on battery power and  
reduce the battery life.  
When the device is locked, you cannot use Bluetooth  
connectivity. See ‘Security’, p. 109 for more information on  
locking the device.  
This device is compliant with Bluetooth Specification 2.0  
supporting the following profiles: Basic Printing Profile,  
Generic Access Profile, Serial Port Profile, Dial-up  
Networking Profile, Headset Profile, Hands-Free Profile,  
Generic Object Exchange Profile, Object Push Profile, File  
Transfer Profile, Basic Imaging Profile, SIM Access Profile,  
and Human Interface Device Profile. To ensure  
interoperability between other devices supporting  
Bluetooth technology, use Nokia approved enhancements  
for this model. Check with the manufacturers of other  
devices to determine their compatibility with this device.  
Settings  
Press  
, and select Connect. > Bluetooth. When you  
open the application for the first time, you are asked to  
define a name for your device. After you set Bluetooth  
connectivity on and change My phone's visibility to  
Shown to all, your device and this name can be seen by  
other users with devices using Bluetooth technology.  
Select from the following:  
Glossary: A profile corresponds to a service or a  
function, and defines how different devices connect.  
For example, the Hands-Free Profile is used between  
the handsfree device and the phone. For devices to be  
compatible, they must support the same profiles.  
Bluetooth—Select On or Off. To connect wirelessly to  
another compatible device, first set Bluetooth connectivity  
On, then establish a connection.  
My phone's visibility—To allow your device to be found by  
other devices with Bluetooth technology, select Shown to  
all. To hide it from other devices, select Hidden.  
There may be restrictions on using Bluetooth technology  
in some locations. Check with your local authorities or  
service provider.  
My phone's name—Edit the name of your device.  
Remote SIM mode—To enable another device, such as a  
compatible car kit enhancement, to use the SIM card in  
your device to connect to the network, select On.  
Features using Bluetooth technology, or allowing such  
features to run in the background while using other  
84  
   
Remote SIM mode  
Security tips  
To use the remote SIM mode with a compatible car kit  
enhancement, set Bluetooth connectivity on, and enable  
the use of the remote SIM mode with your device. Before  
the mode can be activated, the two devices must be paired  
and the pairing initiated from the other device. When  
pairing, use a 16-digit passcode, and set the other device  
as authorized. See ‘Pair devices’, p. 86. Activate the remote  
SIM mode from the other device.  
When you are not using Bluetooth connectivity, select  
Bluetooth > Off or My phone's visibility > Hidden. In  
this way, you can better control who can find your device  
with Bluetooth wireless technology, and connect to it.  
Do not pair with or accept connection requests from an  
unknown device. In this way, you can better protect your  
device from harmful content.  
When the remote SIM mode is on in your Nokia device,  
Remote SIM is displayed in the standby mode. The  
connection to the wireless network is turned off, as  
Send data  
Several Bluetooth connections can be active at a time. For  
example, if you are connected to a headset, you can also  
transfer files to another compatible device at the same  
time.  
indicated by  
in the signal strength indicator area, and  
you cannot use SIM card services or features requiring  
cellular network coverage. However, a wireless LAN  
connection remains active during the remote SIM mode.  
Bluetooth connectivity indicators  
When  
connectivity is on.  
When  
with another device.  
is shown in the standby mode, Bluetooth  
Warning: In the remote SIM mode, you cannot  
make or receive any calls with your device, except make  
calls to certain emergency numbers, or use other  
features that require network coverage. To make calls,  
you must first exit the remote SIM mode. If the device  
has been locked, enter the lock code.  
is blinking, your device is trying to connect  
When  
is shown continuously, data is being  
transmitted using Bluetooth connectivity.  
1 Open the application where the item you want to send  
is stored. For example, to send an image to another  
compatible device, open Gallery.  
To exit the remote SIM mode, press  
rem. SIM mode.  
, and select Exit  
85  
     
2 Select the item and Options > Send > Via Bluetooth.  
Devices with Bluetooth technology within range start  
to appear on the display.  
To pair with a device, select Options > New paired device.  
Devices with wireless Bluetooth technology within range  
start to appear on the display. Select the device, and enter  
the passcode. The same passcode must be entered on the  
other device as well. After pairing, the device is saved to  
the paired devices view.  
Device icons are:  
video device, and  
computer, phone,  
other device.  
audio or  
To interrupt the search, select Stop.  
3 Select the device with which you want to connect.  
4 If the other device requires pairing before data can be  
transmitted, a tone sounds, and you are asked to enter  
a passcode. See ‘Pair devices’, p. 86.  
Paired devices are indicated by  
in the device search.  
To set a device as authorized or unauthorized, scroll to a  
device, and select from the following options:  
5 When the connection has been established, Sending  
Set as authorised—Connections between your device and  
this device can be made without your knowledge. No  
separate acceptance or authorization is needed. Use this  
status for your own devices, such as your compatible  
headset or PC, or devices that belong to someone you trust.  
indicates authorized devices in the paired devices view.  
data is shown.  
The Sent folder in Messag. does not store messages sent  
using Bluetooth connectivity.  
Tip! When searching for devices, some devices may  
show only the unique address (device address). To find  
the unique address of your device, enter the code  
*#2820# in the standby mode.  
Set as unauthorised—Connection requests from this  
device must be accepted separately every time.  
To cancel a pairing, scroll to the device, and select  
Options > Delete. If you want to cancel all pairings, select  
Options > Delete all.  
Pair devices  
To open the paired devices view (  
application main view, press  
), in the Bluetooth  
Tip! If you are currently connected to a device and  
delete the pairing with that device, pairing is removed  
immediately, and the connection is switched off.  
.
Before pairing, create your own passcode (1–16 digits),  
and agree with the owner of the other device to use the  
same code. Devices that do not have a user interface have  
a factory-set passcode. The passcode is used only once.  
86  
       
preferable distance between the two devices is up to  
1 meter (3 feet).  
Receive data  
When you receive data through Bluetooth connectivity, a  
tone sounds, and you are asked if you want to accept the  
2 The user of the receiving device activates the infrared  
port.  
message. If you accept,  
is shown, and the item is  
To activate the infrared port of your device to receive  
placed in the Inbox folder in Messag.. Messages received  
through Bluetooth connectivity are indicated by . See  
‘Inbox—receive messages’, p. 49.  
data through infrared, press  
, and select  
Connect. > Infrared.  
3 The user of the sending device selects the desired  
infrared function to start the data transfer.  
To send data through infrared, locate the desired file in  
an application or the file manager, and select  
Options > Send > Via infrared.  
Switch off  
To switch off Bluetooth connectivity, select Bluetooth >  
Off.  
If data transfer is not started within 1 minute after the  
activation of the infrared port, the connection is cancelled  
and must be started again.  
Infrared connection  
All items received through infrared are placed in the Inbox  
folder in Messaging. New infrared messages are indicated  
With infrared, you can transfer data such as business  
cards, calendar notes, and media files with a compatible  
device.  
by  
.
When  
blinks, your device is trying to connect to the  
other device or a connection has been lost.  
Do not point the infrared (IR) beam at anyone's eye or  
allow it to interfere with other IR devices. This device is a  
Class 1 laser product.  
When is shown continuously, the infrared  
connection is active, and your device is ready to send and  
receive data using its infrared port.  
Send and receive data using infrared  
1 Ensure that the infrared ports of the sending and  
receiving devices are pointing at each other, and that  
there are no obstructions between the devices. The  
87  
     
Important: Always use one of the available  
encryption methods to increase the security of your  
wireless LAN connection and reduce the risk of  
unauthorize access to your data.  
Home network  
Your device is compatible with UPnP. Using a  
wireless LAN access point device or a wireless  
LAN router, you can create a home network and connect  
compatible UPnP devices that support wireless LAN to the  
network, such as your Nokia device, a compatible PC, a  
compatible printer, and a compatible sound system or a  
TV, or a sound system or TV equipped with a compatible  
wireless multimedia receiver.  
Your device is connected to the home network only if you  
accept a connection request from another device, or in  
Gallery, select the option to view, play, print, or copy  
media files on your Nokia device or search for other devices  
in the Home net. folder.  
Using the wireless LAN function of the Nokia N93 in a  
home network requires a working wireless LAN home  
connection setup and the other target home devices to be  
UPnP enabled and to be connected to the same home  
network.  
Important security information  
When you configure your wireless LAN home network,  
enable an encryption method, first on your access point  
device, then on the other devices you intend to connect to  
your home network. Refer to the documentation of the  
devices. Keep any passcodes secret and in a safe place  
separate from the devices.  
The home network uses the security settings of the  
wireless LAN connection. Use the home network feature  
in a wireless LAN infrastructure network with a wireless  
LAN access point device and encryption enabled.  
To view or change the settings of the wireless LAN Internet  
access point in your Nokia device, see ‘Access points’, p.  
106.  
You can share media files saved in Gallery with other  
compatible UPnP devices using the home network. To  
If you use the ad hoc operating mode to create a home  
network with a compatible device, enable one of the  
encryption methods in WLAN security mode when you  
configure the Internet access point. This step reduces the  
risk of an unwanted party joining the ad hoc network.  
manage the settings for Home net. , press  
, and select  
Connect. > Home net. You can also use the home  
network to view, play, copy, or print compatible media  
files from Gallery. See ‘View media files’, p. 90.  
88  
   
Your device notifies you if another device attempts to  
connect to it and the home network. Do not accept  
connection requests from an unknown device.  
The options related to Home net. are not available in  
Gallery before the settings for Home net. have been  
configured.  
If you use wireless LAN in a network that does not have  
encryption, switch off sharing Nokia N93 files with other  
devices, or do not share any private media files. To change  
sharing settings, see ‘Home network settings’, p. 89.  
Configure settings  
To configure Home net., select Connect. > Home net. >  
Settings and from the following:  
Home access point—Select Always ask if you want the  
device to ask for the home access point every time you  
connect to the home network, User defined to select your  
home Internet access point that is used automatically  
when you use Home net., or None. If your home network  
does not have wireless LAN security settings enabled, you  
get a security warning. You can continue and switch on  
the wireless LAN security later; or cancel defining the  
access point, and first switch on the wireless LAN security.  
See Wireless LAN in ‘Access points’, p. 106.  
UPnP wizard  
When you access the home network application for the  
first time, the setup wizard opens, and helps you to define  
the home network settings for your device. To use the  
setup wizard later, in the home network main view, select  
Options > Run wizard, and follow the instructions on the  
display.  
To connect a compatible PC to the home network, on the  
PC, you must install the Home Media Server software from  
the DVD-ROM supplied with your device.  
Device name— Enter a name for your device that is shown  
to the other compatible devices in the home network.  
Set sharing on and define content  
Home network settings  
Select Connect. > Home net. > Share content.  
To share media files saved in Gallery with other compatible  
UPnP devices through a wireless LAN, you must create and  
configure your wireless LAN home IAP; then configure  
Home net.. See ‘Wireless LAN’, p. 17.  
Content sharing—Allow or deny sharing media files with  
compatible devices.  
Important: Do not set Content sharing on before  
you have configured all the other settings. If you set  
Content sharing on, the other UPnP compatible devices in  
89  
 
the home network can view and copy your files you have  
selected for sharing in the Images & video and Music  
folders.  
1 In Gallery, select an image, a video clip, or a sound clip.  
2 Select Options > Show via home net.  
3 Select a compatible device in which the media file is  
shown. The images are shown both in the other home  
network device and your device, and the video clips and  
sound clips are played only in the other device.  
To select media files for sharing with other devices from  
the Images & video and Music folders or to view the  
sharing status of Images & video or Music, select Share  
content.  
Media files stored in the other device  
To select media files that are stored on another home  
network device and show them in your device (or in a  
compatible TV), do the following:  
View media files  
To connect a compatible PC to the home network, you  
must install the related software from the DVD-ROM  
supplied with your Nokia device.  
1 In Gallery, select Home net.. Your device starts the  
search of other compatible devices. Device names start  
to appear on the display.  
If Content sharing is on in your device, the other UPnP  
compatible devices in the home network can view and  
copy the media files you have selected to share in Share  
content. If you do not want the other devices to access  
your files, set Content sharing off. Even if Content  
sharing is off in your device, you can still view and copy  
the media files stored in another home network device if  
it is allowed by the other device.  
2 Select a device from the list.  
3 Select the type of media you want to view from the  
other device. The available file types depend on the  
features of the other device.  
4 Select the image, video clip, or music clip you want to  
view, and select Options > Show via home net.  
(images and video) or Play via home network (music).  
5 Select the device in which the file is shown.  
Media files stored in your device  
To select images, videos, and sound clips stored in your  
device and show them in another home network device,  
such as a compatible TV, do the following:  
To stop sharing the media file, select Options > Stop  
showing.  
To print images saved in Gallery through Home net. with  
a UPnP compatible printer, select the print option in  
90  
   
Gallery. See ‘Image print’, p. 42. Content sharing does not  
have to be switched on.  
The synchronization application uses SyncML technology  
for synchronization. For information on SyncML  
compatibility, contact the supplier of the application with  
which you want to synchronize your device data.  
To search files with different criteria, select Options >  
Find. To sort the found files, select Options > Sort by.  
You may receive synchronization settings in a special text  
message. See ‘Data and settings’, p. 49.  
Copy media files  
To copy or transfer media files from your device to another  
compatible device, such as a UPnP compatible PC, select a  
file in Gallery and Options > Organise > Copy to home  
network or Move to home network. Content sharing  
does not have to be switched on.  
Synchronize data  
In the Sync main view, you can see the different  
synchronization profiles.  
1 Select a synchronization profile and Options >  
Synchronise. The status of the synchronization is  
shown on the display.  
To cancel synchronization before it finishes, select  
Cancel.  
2 You are notified when the synchronization is complete.  
Select Yes to view the log file showing the  
synchronization status and how many entries have  
been added, updated, deleted, or discarded (not  
synchronized) in your device or on the server.  
To copy or transfer files from the other device to your  
device, select a file in the other device, and Options >  
Copy to phone mem. or Copy to memory card (the name  
of the memory card if a compatible memory card is  
available). Content sharing does not have to be switched  
on.  
Synchronization  
Connection manager  
Press  
, and select Connect. > Sync. Sync enables you  
to synchronize your notes, calendar, contacts, or e-mail  
with various compatible calendar and address book  
applications on a compatible computer or on the internet.  
You can also create or edit synchronization settings.  
Press  
, and select Connect. > Conn. mgr.. To view the  
status of data connections or end connections in GSM and  
91  
     
UMTS network and wireless LAN, select Act. data conn..  
To search for wireless LANs available within range, select  
Availab. WLAN.  
Create an Internet access point  
1 Press , and select Connect. > Conn. mgr. >  
Availab. WLAN.  
2 The device searches for wireless LANs within range.  
Scroll to the network in which you want to create an  
Internet access point, and select Options > Define  
access point.  
3 The device creates an Internet access point with default  
settings. To view or change these settings, see ‘Access  
points’, p. 106.  
Data connections  
In the active connections view, you can see the open data  
connections: data calls ( ), packet data connections (  
or ), and wireless LAN connections ( ).  
Note: The actual time invoiced for calls by your  
service provider may vary, depending on network  
features, rounding off for billing, and so forth.  
Device manager  
To end a connection, select Options > Disconnect. To  
close all open connections, select Options > Disconnect  
all.  
Press  
, and select Connect. > Dev. mgr.. You may  
receive server profiles and different configuration settings  
from your service provider, or company information  
management department. These configuration settings  
may include access point settings for data connections and  
other settings used by different applications in your device.  
To view the details of a connection, select Options >  
Details. The details shown depend on the connection type.  
Wireless LAN  
The available wireless LAN view shows a list of wireless  
LANs within range, their network mode (Infrastructure or  
To connect to a server and receive configuration settings  
for your device, scroll to a profile, and select Options >  
Start configuration.  
Ad-hoc), and signal strength indicator.  
is shown for  
if your device has an  
networks with encryption, and  
To allow or deny receiving of configuration settings from  
service providers, select Options > Enable config. or  
Disable config..  
active connection in the network.  
To view the details of a network, select Options > Details.  
92  
         
Server profile settings  
Contact your service provider for the correct settings.  
Modem  
Press  
, and select Connect. > Modem. To connect your  
device to a compatible PC through infrared, to use it as a  
modem, press . For how to connect the devices, see  
‘Infrared connection’, p. 87  
Server name—Enter a name for the configuration server.  
Server ID—Enter the unique ID to identify the  
configuration server.  
Server password—Enter a password to identify your device  
to the server.  
Session mode—Select the connection type that is used to  
connect to the server: Bluetooth or Internet.  
Access point—Select an access point to be used when  
connecting to the server.  
Host address—Enter the URL address of the server.  
Port—Enter the port number of the server.  
User name and Password—Enter your user name and  
password.  
Allow configuration—To receive configuration settings  
from the server, select Yes.  
Auto-accept all reqs.—If you want your device to ask for  
confirmation before accepting a configuration from the  
server, select No.  
Network authentic.—Select if network authentication is  
used.  
93  
   
Office  
Base currency and exchange rates  
Recorder  
Select Type > Currency > Options > Currency rates.  
Before you can make currency conversions, you must select  
a base currency and add exchange rates. The rate of the  
base currency is always 1.  
To record voice memos, press  
, and select Office >  
Recorder. To record a telephone conversation, open  
Recorder during a voice call. Both parties hear a tone  
every 5 seconds during recording.  
Note: When you change base currency, you must  
enter the new rates because all previously set exchange  
rates are cleared.  
Converter  
Calculator  
To convert measures from one unit to another, press  
,
and select Office > Converter.  
To add, subtract, multiply, divide, and calculate square  
Converter has limited accuracy, and rounding errors may  
occur.  
roots and percentages, press  
Calculator.  
, and select Office >  
1 In the Type field, select the measure you want to use.  
2 In first Unit field, select the unit from which you want  
to convert. In the next Unit field, select the unit to  
which you want to convert.  
Note: This calculator has limited accuracy and is  
designed for simple calculations.  
3 In the first Amount field, enter the value you want to  
convert. The other Amount field changes  
automatically to show the converted value.  
94  
         
Archive password—Set, clear, or change the archive  
password for protected archives.  
Zip manager settings—Change the following settings:  
Compession level and Include subfolders.  
Notes  
To write notes, press  
can send notes to compatible devices, and save plain text  
files (.txt format) that you receive to Notes.  
, and select Office > Notes. You  
You can store archive files on the device or on a  
compatible memory card.  
To print a note on a compatible basic print profile (BPP)  
equipped printer with Bluetooth connectivity (such as HP  
Deskjet 450 Mobile Printer or HP Photosmart 8150), select  
Options > Print.  
Quickoffice  
To use the Quickoffice applications, press  
, and select  
Office > Quickoffice. A list of files in the .doc, .xls, .ppt,  
and .txt file formats saved in your device opens.  
Zip manager  
To open a file in its respective application, press  
sort files, select Options > Sort files.  
. To  
Use the Zip manager application to compress files.  
Compressed files use less memory and are more convenient  
to e-mail.  
To open Quickword, Quicksheet, or Quickpoint, press  
to reach the desired view.  
To open Zip manager, press  
, and select Office > Zip .  
Quickword  
With Quickword, you can view native Microsoft Word  
documents on the display of your device. Quickword  
supports colors, bold, italics, and underline.  
You can perform the following tasks using Zip manager:  
Create new archive—Create a new archive file to store  
compressed ZIP formatted files  
Update an archive—Add single or multiplecompressed  
files or directories to an existing archive.  
Delete files—Delete files or directories from an existing  
archive.  
Quickword supports the viewing of documents saved in  
.doc format in Microsoft Word 97 or later. Not all  
95  
       
variations or features of the mentioned file formats are  
supported.  
View spreadsheets  
To move around in the spreadsheet, use the scroll key.  
See also ‘More information’, p. 97.  
To switch between worksheets, select Options >  
Worksheet.  
View Word documents  
To search the speadsheet for a text within a value or  
formula, select Options > Find.  
To move in the document, use the scroll key.  
To search the document for text, select Options > Find.  
You can also select Options and from the following:  
To change how the spreadsheet is displayed, select  
Options and from the following:  
Go to—to move to the start, end, or selected position  
within the document  
Pan—to navigate within the current worksheet by blocks.  
A block contains columns and rows displayed by a screen.  
To display the columns and rows, select a block and OK.  
Zoom—to zoom in or out  
Start auto-scroll—to start automatic scrolling through  
Zoom—to zoom in or out  
the document. To stop scrolling, press  
.
Freeze panes—to keep the highlighted row, column, or  
both visible while you move in the spreadsheet  
Quicksheet  
With Quicksheet, you can read Microsoft Excel files on  
the display of your device.  
Resize—to adjust the size of columns or rows  
Quickpoint  
With Quickpoint, you can view Microsoft PowerPoint  
presentations on the display of your device.  
Quicksheet supports the viewing of spreadsheet files  
saved in .xls format in Microsoft Excel 97 or later. Not all  
variations or features of the mentioned file formats are  
supported.  
Quickpoint supports the viewing of presentations created  
in .ppt format in Microsoft PowerPoint 97 or later. Not all  
variations or features of the mentioned file formats are  
supported.  
See also ‘More information’, p. 97.  
96  
See also ‘More information’, p. 97.  
This application has been optimized for PDF document  
content on handsets and other mobile devices, and  
provides only a limited set of features compared with PC  
versions.  
View presentations  
To move between the slide, outline, and the notes view,  
press  
To move to the next or previous slide in the presentation,  
press or  
or  
.
To access and open documents:  
Press  
, and select Office > Adobe PDF. Select  
.
Options > Browse for file to browse and open  
documents stored in the device memory and on a  
compatible memory card.  
To view the presentation in full screen, select Options >  
Full screen.  
Open an e-mail attachment from received e-mail  
messages (network service).  
Send a document using Bluetooth connectivity to your  
Inbox in Messag..  
Use File mgr. to browse and open documents stored in  
the device memory and on the memory card.  
Browse web pages. Ensure your device is set up with an  
Internet access point before browsing. For more  
information on access points, see the user guide for  
your device.  
To expand items in the presentation outline in the outline  
view, select Options > Expand.  
More information  
If you experience problems with Quickword, Quicksheet,  
or Quickpoint, visit www.quickoffice.com for more  
information. Support is also available by sending an e-mail  
Adobe reader  
Manage PDF files  
To browse and manage PDF files, press  
, and select  
Office > Adobe PDF. Your recent files are listed in the file  
view. To open a document, scroll to it, and press  
.
With Adobe Reader you can read PDF documents on the  
display of your device.  
You can also select Options and from the following:  
97  
   
Browse for file—to browse for PDF files in the device  
More information  
For more information, visit www.adobe.com.  
memory or on a compatible memory card.  
Settings—to modify default zoom level and viewing mode  
of PDF documents.  
To share questions, suggestions, and information about the  
application, visit the Adobe Reader for Symbian OS user  
forum at http://adobe.com/support/forums/main.html.  
View PDF files  
When a PDF file is open, select Options and one of the  
following:  
Barcode reader  
Use the Barcode application to decode different  
types of codes (for example, barcodes and codes  
in magazines). The codes may contain information such as  
URL links, e-mail addresses, and phone numbers.  
Zoom—to zoom in, out, or to a selected percentage. You  
can also resize the document to the screen width, or fit  
the whole PDF page to the screen.  
Find—to search the document for a text.  
To scan and decode barcodes, press  
, and select  
View—to view the document in full screen. You can also  
rotate the PDF document by 90 degrees in either direction.  
Office > Barcode.  
To scan a code, select Scan code. Set the code between the  
red lines on the display. The Barcode scans and decodes  
the code, and the decoded information appears on the  
display.  
Go to—to move to a selected page, next page, previous  
page, first page, or last page.  
Save—to save the file to device memory or a compatible  
memory card.  
To save the scanned data, select Options > Save. The data  
is saved in .bcr format.  
Settings—to modify default zoom level and default  
viewing mode.  
To view saved decoded information, in the main view,  
Details—to display the properties of the PDF document.  
select Saved data. To open a code, press  
.
When viewing the decoded information, the different links,  
URL links, phone numbers, and e-mail addresses, are  
98  
 
indicated by icons on the top of the display in the direction  
they appear in the decoded information.  
Select Saved data > Options and from the following:  
Scan new code—to scan a new code  
Open link—to open a URL link  
Add to bookmarks—to save a URL link to the bookmarks  
in Web  
Create message—to send a text message or an e-mail to a  
phone number or an e-mail address  
Add to Contacts—to add a phone number, e-mail address,  
or URL address to Contacts  
Call—to call a phone number.  
The available options may vary depending on the  
highlighted link.  
The device goes into the standby mode to save battery  
power if Barcode cannot be activated or if no keys are  
pressed for 1 minute. To continue scanning or viewing  
saved information, press  
.
99  
Personalize your device  
Your service provider may have requested that certain  
features be disabled or not activated in your device. If so,  
they will not appear on your device menu. Your device  
may also have been specially configured for your service  
provider. This configuration may include changes in menu  
names, menu order, and icons. Contact your service  
provider for more information.  
To change the clock shown in the standby mode, press  
, and select Clock > Options > Settings > Clock  
type > Analogue or Digital.  
press , and select Tools > Settings > Phone >  
General > Welcome note / logo.  
To change the main menu view, in the main menu,  
select Options > Change view > Grid or List.  
To rearrange the main menu, in the main menu, select  
Options > Move, Move to folder, or New folder. You  
can move less used applications into folders, and place  
applications that you use more often into the main  
menu.  
To use the standby display for fast access to your most  
frequently used applications, see ‘Active standby  
mode’, p. 102.  
To change the standby  
mode background image  
or what is shown in the  
screen saver, see ‘Change  
the look of your device’,  
p. 101.  
Profiles—set tones  
To customize the ringing  
tones, see ‘Profiles—set  
tones’, p. 100 and ‘Add  
ringing tones for  
contacts’, p. 69.  
To change the shortcuts  
To set and customize the ringing tones, message alert  
tones, and other tones for different events, environments,  
or caller groups, press , and select Tools > Profiles.  
To change the profile, press  
Scroll to the profile you want to activate, and select OK.  
in the standby mode.  
assigned to  
,
and  
in the standby mode, see ‘Standby mode’, p. 104.  
To modify a profile, press , and select Tools > Profiles.  
Scroll to the profile, and select Options > Personalise.  
100  
           
Scroll to the setting you want to change, and press  
open the choices. Tones stored on the memory card are  
to  
activate the phone function. If the device has been  
locked, enter the lock code.  
indicated with  
and listen to each one before you make your selection. To  
stop the sound, press any key.  
. You can scroll through the tone list  
Warning: Your device must be switched on to use  
offline profile. Do not switch the device on when  
wireless device use is prohibited or when it may cause  
interference or danger.  
When you choose a tone, Tone downloads opens a list of  
bookmarks. You can select a bookmark and start a  
connection to a web page to download tones.  
When you have activated the offline profile, you can still  
use the wireless LAN (if available), for example, to read  
your e-mail or browse on the internet. Remember to  
comply with any applicable safety requirements when  
establishing and using a wireless LAN connection. See  
‘Wireless LAN’, p. 17.  
If you want the caller’s name to be said when your device  
rings, select Options > Personalise > Say caller's name >  
On. The caller’s name must be saved in Contacts.  
To create a new profile, select Options > Create new.  
To exit the offline profile, press  
, and select another  
profile. The device reenables wireless transmissions  
(providing there is sufficient signal strength). If a  
Bluetooth connection is activated before using the offline  
profile, it is deactivated. A Bluetooth connection is  
automatically reactivated after you exit the offline profile.  
See ‘Settings’, p. 84.  
Offline profile  
The offline profile lets you use the device without  
connecting to the wireless network. When you activate the  
offline profile, the connection to the wireless network is  
turned off, as indicated by  
in the signal strength  
indicator area. All wireless phone signals to and from the  
device are prevented. If you try to send messages, they are  
placed in the outbox to be sent later.  
Change the look of your  
device  
Warning: In the offline profile you cannot make or  
receive any calls, except calls to certain emergency  
numbers, or use other features that require network  
coverage. To make calls, you must change profiles to  
To change the look of the display, such as the wallpaper  
and icons, press , and select Tools > Themes. The active  
theme is indicated by  
. In Themes you can group  
101  
     
together elements from other themes or select images  
from the Gallery to personalize themes further. The  
themes on a compatible memory card (if inserted) are  
Press , select Tools > Settings > Phone > Standby  
mode > Active standby, and press  
to switch the active  
standby on or off.  
indicated by  
. The themes on the memory card are not  
The active standby display is  
shown with default  
applications across the top of  
the screen, and calendar,  
to-do, and player events  
listed below.  
available if the memory card is not inserted in the device.  
If you want to use the themes saved in the memory card  
without the memory card, save the themes in the device  
memory first.  
To open a browser connection and download more  
themes, select Theme downloads.  
Scroll to an application or  
To activate a theme, scroll to it, and select Options >  
Apply. To preview a theme before activating it, select  
Options > Preview.  
event, and press  
.
The standard scroll key  
shortcuts available in the  
standby mode cannot be used  
when the active standby  
mode is on.  
To edit themes, scroll to a theme, and select Options >  
Edit to change the settings for Wallpaper and Power  
saver.  
To restore the selected theme to its original settings,  
select Options > Restore orig. theme when you edit a  
theme.  
To change the default applications shortcuts, press  
,
select Tools > Settings > Phone > Standby mode >  
Active standby apps., and press  
.
Some shortcuts may be fixed, and you are not able to  
change them.  
Active standby mode  
Use your standby display for fast access to your most  
frequently used applications. By default, the active  
standby mode is on.  
102  
   
Tools  
Phone settings  
Multimedia key  
To open the shortcut assigned to the multimedia key, press  
General  
and hold  
press  
. To open a list of multimedia applications,  
. To open the desired application, use the scroll  
Phone language—Changing the language of the display  
texts in your device also affects the format used for date  
and time and the separators used, for example, in  
calculations. Automaticselects the language according to  
the information on your SIM card. After you change the  
display text language, the device restarts.  
key. To exit the list without selecting an application, press  
.
To change the shortcuts, press  
and  
. To change the  
, select  
applications that are shown when you press  
Top, Left, Middle, and Right and the application.  
Changing the settings for Phone language or Writing  
language affects every application in your device, and the  
change remains effective until you change these settings  
again.  
Some shortcuts may be fixed, and you are not able to  
change them.  
Writing language—Changing the language affects the  
characters and special characters available when writing  
text and the predictive text dictionary used.  
Settings  
To change settings, press  
To open a settings group, press  
want to change, and press  
, and select Tools > Settings.  
Predictive text—Set the predictive text input On or Off  
for all editors in the device. The predictive text dictionary  
is not available for all languages.  
. Scroll to a setting you  
.
Some settings may be preset for the device by your service  
provider, and you may not be able to change them.  
Welcome note / logo—The welcome note or logo is  
displayed briefly each time you switch on the device.  
103  
         
Select Default to use the default image, Text to write a  
welcome note, or Image to select an image from Gallery.  
Display  
Brightness—Adjust the basic brightness level of the display  
to lighter or darker. However, in extreme light conditions,  
the brightness of the display is automatically adjusted.  
Orig. phone settings—You can reset some of the settings  
to their original values. To do this, you need the lock code.  
See ‘Security’, ‘Phone and SIM’, p. 110. After resetting, the  
device may take a longer time to power on. Documents  
and files are unaffected.  
Power saver time-out—Select the time-out period after  
which the screen saver is activated.  
Light time-out—Select a time-out after which the  
backlight of the display is switched off.  
Standby mode  
Active standby—Use shortcuts to applications in the  
Cover display  
Select Personalisation and from the following:  
standby mode. See ‘Active standby mode’, p. 102.  
Left selection key—Assign a shortcut to the left selection  
Wallpaper—Select the background image displayed on the  
cover display in the standby mode. If you select User  
defined in the wallpaper settings, the cropping tool frame  
is shown on top of the image you selected. The cropping  
tool frame is the size of the cover display, and you can  
zoom, rotate, and crop the area of the image you want to  
be displayed on the cover display.  
key (  
) in the standby mode.  
Right selection key—Assign a shortcut to the right  
selection key ( ) in the standby mode.  
Active standby apps.—Select the application shortcuts  
you want to appear in the active standby. This setting is  
only available if Active standby is on.  
You can also assign keypad shortcuts for the different  
presses of the centre selection key. The centre selection  
key shortcuts are not available if the active standby is on.  
Closing animation—Select a short animation to play when  
you close the cover.  
Closing tone—Select a short tune to play when you close  
the cover.  
Operator logo—This setting is only available if you have  
received and saved an operator logo. Select Off if you do  
not want the logo to be shown.  
Opening tone—Select a short tune to play when you open  
the cover and the device is in the standby mode.  
Select Calls and from the following:  
104  
         
Answer if fold opened—Select No or Yes.  
Automatic redial—Select On, and your device makes a  
maximum of 10 attempts to connect the call after an  
unsuccessful call attempt. To stop automatic redialing,  
If fold closed—Select End call or Activate loudspeaker.  
press  
.
Call settings  
Summary after call—Activate this setting if you want the  
device to briefly display the approximate duration of the  
last call.  
Send my caller ID—Select Yes or No to set your phone to  
be seen or hidden from the person you are calling.  
Otherwise, the value may be set by your service provider  
when you subscribe to the network service. Set by  
network is displayed.  
Speed dialling—Select On, and the numbers assigned to  
the speed dialing keys (  
) can be dialed by  
pressing and holding the key. See also ‘Speed dial a phone  
number’, p. 58.  
Call waiting—If you have activated call waiting (network  
service), the network notifies you of a new incoming call  
while you have a call in progress. To check whether the  
function is active, select Check status. To set the function  
on or off, select Activate or Cancel.  
Anykey answer—Select On. To answer an incoming call  
briefly press any keypad key, except  
.
,
,
, and  
Line in use—This setting (network service) is shown only  
if the SIM card supports two subscriber numbers, that is,  
two phone lines. Select which phone line you want to use  
for making calls and sending text messages. Calls on both  
lines can be answered irrespective of the selected line. If  
you select Line 2 and have not subscribed to this network  
service, you will not be able to make calls. When line 2 is  
Reject call with SMS—Select Yes to send a text message  
to a caller informing why you could not answer the call.  
See ‘Answer or reject a call’, p. 63.  
Message text—Write text to be sent in a text message  
when you reject a call.  
selected,  
Tip! To switch between the phone lines, press and  
hold in the standby mode.  
is shown in the standby mode.  
Image in video call—You can deny video sending when  
you receive a video call. Select a still image to be displayed  
instead of video.  
105  
   
Line change—To prevent line selection (network service),  
select Disable if supported by your SIM card. To change  
this setting, you need the PIN2 code.  
and subscription to packet data connection services,  
contact your service provider.  
Access points  
You may receive access point settings in a message from a  
service provider. See ‘Data and settings’, p. 49. Some or all  
access points may be preset for your device by your service  
provider, and you may not be able to change, create, edit,  
Connection  
Data connections and access points  
or remove them.  
indicates a protected access point.  
Your device supports packet data connections, such as  
GPRS in the GSM network. When you use your device in  
GSM and UMTS networks, multiple data connections can  
be active at the same time, and access points can share a  
data connection.  
indicates a packet data access point, and  
a
wireless LAN access point.  
Tip! To create an IAP in a wireless LAN, press  
, and  
select Connect. > Conn. mgr. > Availab. WLAN >  
Options > Define access point.  
You can also use a wireless LAN data connection. See  
‘Wireless LAN’, p. 17. Only one connection in one wireless  
LAN can be active at a time.  
To create a new access point, select Options > New access  
point. To edit the settings of an access point, select  
Options > Edit. Follow the instructions from your service  
provider.  
To establish a data connection, an access point is required.  
You can define different kinds of access points as follows:  
Connection name—Enter a descriptive name for the  
MMS access point to send and receive multimedia  
messages  
Access point for the web application to view WML or  
XHTML pages  
IAP to send and receive e-mail and connect to the  
internet  
connection.  
Data bearer—Select the data connection type.  
Depending on the data connection you select, only certain  
setting fields are available. Fill in all fields marked with  
Must be defined or with a red asterisk. Other fields can be  
left empty, unless you have been instructed otherwise by  
your service provider.  
Check the type of access point you need with your service  
provider for the service you want to access. For availability  
106  
       
To be able to use a data connection, the network service  
provider must support this feature, and if necessary,  
activate it for your SIM card.  
DNS address—In Primary name serv.:, enter the IP  
address of the primary DNS server. In Second. name  
server:, enter the IP address of the secondary DNS server.  
Contact your internet service provider to obtain these  
addresses.  
Packet data  
Follow the instructions from your service provider.  
Proxy serv. address—Define the address for the proxy  
server.  
Access point name—You obtain the access point name  
from your service provider.  
Proxy port number—Enter the proxy port number.  
Wireless LAN  
User name—The user name may be needed to make a data  
connection, and is usually provided by the service provider.  
Follow the instructions from your service provider.  
Prompt password—If you must enter the password every  
time you log in to a server, or if you do not want to save  
your password in the device, select Yes.  
WLAN netw. name—Select Enter manuallyor Search for  
netw.. If you select an existing network, WLAN netw.  
mode and WLAN security mode are determined by the  
settings of its access point device.  
Password—A password may be needed to make a data  
connection, and is usually provided by the service provider.  
WLAN netw. mode—Select Ad-hoc to create an ad hoc  
network and to allow devices to send and receive data  
directly; a wireless LAN access point device is not needed.  
Authentication—Select Normal or Secure.  
Homepage—Depending on the access point you are setting  
up, enter the web address or the address of the multimedia  
messaging center.  
WLAN security mode—Select the encryption used: WEP,  
802.1x (not for ad hoc networks), or WPA/WPA2. If you  
select Open network, no encryption is used. The WEP,  
802.1x, and WPA functions can be used only if the  
network supports them.  
Select Options > Advanced settings to change the  
following settings:  
Network type—Select IPv4 settings or IPv6 settings. The  
other settings depend on the selected network type.  
WLAN security sett.—Enter the settings for the selected  
security mode:  
Phone IP address (for IPv4 only)—Enter the IP address of  
your device.  
107  
 
Security settings for WEP are as follows:  
Select Options > Advanced settings and from the  
following:  
Wep key in use—Select the WEP key number. You can  
create up to four WEP keys. The same settings must be  
entered on the wireless LAN access point device.  
IPv4 settings: Phone IP address (the IP address of your  
device), Subnet mask (the subnet IP address), Default  
gateway (the gateway), and DNS address—Enter the IP  
addresses of the primary and secondary DNS server.  
Contact your internet service provider for these addresses.  
Authentication type—Select Open or Shared for the  
authentication type between your device and the wireless  
LAN access point device.  
IPv6 settings > DNS address—Select Automatic,  
WEP key settings—Enter WEP encryption (length of the  
key), WEP key format (ASCII or Hexadecimal), and WEP  
key (the WEP key data in the selected format).  
Well-known, or User defined.  
Ad-hoc channel (only for Ad-hoc)—To enter a channel  
number (1-11) manually, select User defined.  
Security settings for 802.1x and WPA/WPA2 are as  
follows:  
Proxy serv. address—Enter the address for the proxy  
server.  
WPA mode—Select the means of authentication: EAP to  
use an extensible authentication protocol (EAP) plug-in or  
Pre-shared key to use a password. Complete the  
appropriate settings:  
Proxy port number—Enter the proxy port number.  
Packet data  
The packet data settings affect all access points using a  
packet data connection.  
EAP plug-in settings (only for EAP)—Enter the settings as  
your service provider instructs.  
Packet data conn.—If you select When available and you  
are in a network that supports packet data, the device  
registers to the packet data network. Starting an active  
packet data connection (for example, to send and receive  
e-mail) is quicker. If there is no packet data coverage, the  
device periodically tries to establish a packet data  
Pre-shared key (only for Pre-shared key)—Enter a  
password. The same password must be entered on the  
wireless LAN access point device.  
TKIP encryption—Select whether Temporal Key Integrity  
Protocol (TKIP) is used.  
connection. If you select When needed, the device uses a  
Homepage—Define a home page.  
108  
 
packet data connection only if you start an application or  
action that needs it.  
Security  
Access point—The access point name is needed to use your  
device as a packet data modem to your computer.  
Phone and SIM  
PIN code request—When active, the code is requested  
each time the device is switched on. Deactivating the PIN  
code request may not be allowed by some SIM cards. See  
‘Glossary of PIN and lock codes’, p. 110.  
Wireless LAN  
Show availability—Select whether  
a wireless LAN is available.  
is displayed when  
Scan for networks—If you set Show availability to Yes,  
select how often the device searches for available wireless  
LANs and updates the indicator.  
PIN code, PIN2 code, and Lock code—You can change the  
lock, PIN, and PIN2 codes. These codes can only include  
the numbers from 0 to 9. If you forget any of these codes,  
contact your service provider. See ‘Glossary of PIN and  
lock codes’, p. 110.  
To view advanced settings, select Options > Advanced  
settings. Changing wireless LAN advanced settings is not  
recommended.  
Avoid using access codes similar to the emergency  
numbers to prevent accidental dialing of the emergency  
number.  
Configurations  
You may receive trusted server settings from your service  
provider in a configuration message, or the settings may be  
stored on your USIM card. You can save these settings to  
your device, view, or delete them in Configs..  
Autolock period—You can set an autolock period, a  
time-out after which the device automatically locks. To  
turn off the autolock period, select None.  
To unlock the device, enter the lock code.  
Date and time  
When the device is locked, calls may be possible to the  
official emergency number programmed into your device.  
See ‘Clock settings’, p. 17 and language settings in  
‘General’, p. 103.  
Tip! To lock the device manually, press  
commands opens. Select Lock phone.  
. A list of  
109  
             
Lock if SIM changed—You can set the device to ask for  
the lock code when an unknown SIM card is inserted into  
your device. The device maintains a list of SIM cards that  
are recognized as the owner’s cards.  
PIN2 code—This code (4 to 8 digits) is supplied with some  
SIM cards, and is required to access some functions in your  
device.  
Lock code (security code)—This code (5 digits) can be used  
to lock the device to avoid unauthorized use. The factory  
setting for the lock code is 12345. To avoid unauthorized  
use of your device, change the lock code. Keep the new  
code secret and in a safe place separate from your device.  
If you forget the code, contact your service provider.  
Closed user group—You can specify a group of people to  
whom you can call and who can call you (network  
service).  
When calls are limited to closed user groups, calls may be  
possible to the official emergency number programmed  
into your device.  
PUK and PUK2 codes—These codes (8 digits) are required to  
change a blocked PIN code or PIN2 code, respectively. If  
the codes are not supplied with the SIM card, contact the  
operator whose SIM card is in your device.  
Confirm SIM services—You can set the device to display  
confirmation messages when you are using a SIM card  
service (network service).  
UPUK code—This code (8 digits) is required to change a  
blocked UPIN code. If the code is not supplied with the  
USIM card, contact the service provider whose USIM card  
is in your device.  
Glossary of PIN and lock codes  
If you forget any of these codes, contact your service  
provider.  
PIN code—This code protects your SIM card against  
unauthorized use. The PIN code (4 to 8 digits) is usually  
supplied with the SIM card. After three consecutive  
incorrect PIN code entries, the code is blocked, and you  
need the PUK code to unblock it.  
Certificate management  
Digital certificates do not guarantee safety; they are used  
to verify the origin of software.  
In the certificate management main view, you can see a  
list of authority certificates that are stored in your device.  
UPIN code—This code may be supplied with the USIM  
card. The USIM card is an enhanced version of the SIM  
card and is supported by UMTS mobile phones.  
Press  
to see a list of personal certificates, if available.  
Digital certificates should be used if you want to connect  
to an online bank or another site or remote server for  
110  
                   
actions that involve transferring confidential information.  
They should also be used if you want to reduce the risk of  
viruses or other malicious software and be sure of the  
authenticity of software when downloading and installing  
software.  
certificate details, the validity of the certificate is checked,  
and one of the following notes may be displayed:  
Certificate not trusted—You have not set any application  
to use the certificate. See ‘Change the trust settings’, p.  
111.  
Important: Even if the use of certificates makes the  
risks involved in remote connections and software  
installation considerably smaller, they must be used  
correctly in order to benefit from increased security. The  
existence of a certificate does not offer any protection by  
itself; the certificate manager must contain correct,  
authentic, or trusted certificates for increased security to  
be available. Certificates have a restricted lifetime. If  
Expired certificate or Certificate not valid yet is shown  
even if the certificate should be valid, check that the  
current date and time in your device are correct.  
Expired certificate—The period of validity has ended for  
the selected certificate.  
Certificate not valid yet—The period of validity has not  
yet begun for the selected certificate.  
Certificate corrupted—The certificate cannot be used.  
Contact the certificate issuer.  
Change the trust settings  
Before changing any certificate settings, you must make  
sure that you really trust the owner of the certificate and  
that the certificate really belongs to the listed owner.  
View certificate details—check authenticity  
Scroll to an authority certificate, and select Options >  
Trust settings. Depending on the certificate, a list of the  
applications that can use the selected certificate is shown.  
For example:  
You can only be sure of the correct identity of a server  
when the signature and the period of validity of a server  
certificate have been checked.  
You are notified if the identity of the server is not  
authentic or if you do not have the correct security  
certificate in your device.  
Symbian installation >Yes—The certificate is able to  
certify the origin of a new Symbian operating system  
application.  
To check certificate details, scroll to a certificate, and  
select Options > Certificate details. When you open  
Internet > Yes—The certificate is able to certify servers.  
111  
 
App. installation > Yes—The certificate is able to certify  
the origin of a new Java application.  
To check whether option is active, select Check status. To  
set the option on or off, select Activate or Cancel.  
Select Options > Edit trust setting to change the value.  
Several diverting options can be active at the same time.  
When all calls are diverted,  
standby mode.  
is shown in the  
Track protection object  
Some copyright-protected music files may include a  
transaction identifier. Select whether you allow the  
identifier to be sent with the music file if you send or  
forward the file. The provider of the music file can use the  
identifier to track the distribution of the files.  
Call barring and call diverting cannot be active at the same  
time.  
Call barring  
EAP plug-ins  
You can view the EAP plug-ins currently installed in your  
device (network service). Some Internet access points that  
use wireless LAN as a data bearer and WPA security mode  
use the plug-ins for authentication.  
Call barring (network service) allows you to restrict the  
calls that you make or receive with the device. To change  
the settings, you need the restriction password from your  
service provider.  
Select the desired barring option. To check whether option  
is active, select Check status. To set it on or off, select  
Activate or Cancel. Call barring affects all calls, including  
data calls.  
Call divert  
Call divert allows you to divert your incoming calls to  
your voice mailbox or another phone number. For details,  
contact your service provider.  
Call barring and call diverting cannot be active at the same  
time.  
When calls are barred, calls may be possible to certain  
official emergency numbers.  
Select which calls you want to divert and the desired  
diverting option. To divert voice calls when your number  
is busy or when you reject incoming calls, select If busy.  
112  
     
Cell info display—Select On to set the device to indicate  
when it is used in a cellular network based on  
microcellular network (MCN) technology and to activate  
cell info reception.  
Network  
Your device can automatically switch between the GSM  
and UMTS networks. The GSM network is indicated with  
in the standby mode. The UMTS network is indicated  
Enhancement settings  
with  
.
Network mode (shown only if supported by the wireless  
service provider)—Select which network to use. If you  
select Dual mode, the device uses the GSM or UMTS  
network automatically, according to the network  
parameters and the roaming agreements between the  
wireless service providers. Contact your service provider for  
more details.  
In the standby mode,  
is connected, and  
a Bluetooth connection to a headset is lost.  
a compatible loopset is connected and  
phone is connected.  
indicates a compatible headset  
that the headset is unavailable, or  
indicates  
that a Text  
Select Headset, Loopset, Text phone, Bluetooth  
handsfree, or Car kit and from the following:  
Operator selection—Select Automatic to set the device to  
search for and select one of the available networks, or  
Manual to manually select the network from a list of  
networks. If the connection to the manually selected  
network is lost, the device sounds an error tone and asks  
you to reselect a network. The selected network must have  
a roaming agreement with your home cellular network.  
Default profile—Set the profile that you want activated  
each time you connect a certain enhancement to your  
device. See ‘Profiles—set tones’, p. 100.  
Automatic answer—Set if you want the device to answer  
an incoming call automatically after 5 seconds. If the  
ringing type is set to Beep once or Silent, automatic  
answer is disabled. Automatic answer is not available for  
Text phone.  
Glossary: A roaming agreement is an agreement  
between two or more network service providers to  
enable the users of one service provider to use the  
services of other service providers.  
Lights (for car kit)—Set whether lights remain on or are  
switched off after the time-out.  
113  
 
If you are using a Text phone, you must activate it on your  
device. Press  
Enhancement > Text phone > Use Text phone > Yes.  
To add more applications to the list, select Options > New  
application. To add a second voice command that can be  
used to start the application, select Options > Change  
command, and enter the new voice command as text.  
Avoid very short names, abbreviations, and acronyms.  
, and select Tools > Settings >  
TV configuration  
To listen to the synthesized voice tag, select Options >  
Playback.  
Press  
following:  
, and select Tools > TV out. Select from the  
To change voice command settings, select Options >  
Settings. To switch off the synthesizer that plays  
recognized voice tags and commands in the selected  
device language, select Synthesiser > Off. To reset voice  
recognition learning, select Reset voice adapts..  
TV system—Select PAL for PAL and SECAM TV system  
format or NTSC for NTSC TV system format.  
Ratio—Select 4:3 or 16:9.  
Voice commands  
Application manager  
You can use voice commands to control your device. For  
more information about the enhanced voice commands  
supported by your device, see ‘Voice dialing’, p. 58.  
Press  
, and select Tools > App. mgr.. You can install  
two types of applications and software to your device:  
J2ME™ applications based on Java technology with the  
extension .jad or .jar ( ).  
To activate enhanced voice commands for starting  
applications and profiles, press  
Voice cm. > Profiles. The device creates voice tags for the  
applications and profiles. To use enhanced voice  
and select Tools >  
Other applications and software suitable for the  
Symbian operating system ( ). The installation files  
have the .sis extension. Only install software  
specifically designed for your Nokia device. Software  
providers will often refer to the official model number  
of this product.  
commands, press and hold  
in the standby mode, and  
say a voice command. The voice command is the name of  
the application or profile displayed in the list.  
114  
           
Installation files may be transferred to your device from a  
compatible computer, downloaded during browsing, or  
sent to you in a multimedia message, as an e-mail  
attachment, or using Bluetooth connectivity or infrared.  
You can use Nokia Application Installer in Nokia PC Suite  
to install an application to your device. If you use  
Microsoft Windows Explorer to transfer a file, save the file  
to a memory card (local disk).  
Before installation, note the following:  
To view the application type, version number, and the  
supplier or manufacturer of the application, select  
Options > View details.  
To display the security certificate details of the  
application, select Options > View certificate. See  
‘Certificate management’, p. 110.  
If you install a file that contains an update or repair to  
an existing application, you can only restore the  
original application if you have the original installation  
file or a full back-up copy of the removed software  
package. To restore the original application, remove  
the application, and install the application again from  
the original installation file or the back-up copy.  
The .jar file is required for installing Java applications.  
If it is missing, the device may ask you to download it.  
If there is no access point defined for the application,  
you are asked to select one. When you are  
After you install applications to a compatible memory  
card, installation files (.sis) remain in the device memory.  
The files may use large amounts of memory and prevent  
you from storing other files. To maintain sufficient  
memory, use Nokia PC Suite to back up installation files to  
a compatible PC, then use the file manager to remove the  
installation files from the device memory. If the .sis file is  
a message attachment, delete the message from the  
Messaging inbox.  
downloading the .jar file, you may need to enter a user  
name and password to access the server. You obtain  
these from the supplier or manufacturer of the  
application.  
Install applications and software  
indicates a .sis application,  
that the application is not fully installed, and  
a Java application,  
that the  
application is installed on a compatible memory card.  
1 To locate an installation file, press  
, and select  
Tools > App. mgr.. Alternatively, search the device  
memory or a memory card (if inserted) in File mgr., or  
open a message in Messag. > Inbox that contains an  
installation file.  
Important: Only install and use applications and  
other software from trusted sources, such as applications  
that are Symbian Signed or have passed the Java  
VerifiedTM testing.  
115  
     
2 In App. mgr., select Options > Install. In other  
applications, scroll to the installation file, and press  
to start the installation.  
Remove applications and software  
Scroll to a software package, and select Options >  
Remove. Select Yes to confirm.  
During installation, the device shows information  
about the progress of the installation. If you are  
installing an application without a digital signature or  
certification, the device displays a warning. Continue  
installation only if you are sure of the origin and  
contents of the application.  
If you remove software, you can only reinstall it if you have  
the original software package or a full backup of the  
removed software package. If you remove a software  
package, you may no longer be able to open documents  
created with that software.  
To start an installed application, locate it in the menu, and  
If another software package depends on the software  
package that you removed, the other software package  
may stop working. Refer to the documentation of the  
installed software package for details.  
press  
.
To start a network connection and to view extra  
information about the application, select Options > Go to  
web address, if available.  
Settings  
To see what software packages are installed or removed  
and when, select Options > View log.  
Select Options > Settings and from the following:  
To send your installation log to a help desk so that they  
can see what is installed or removed, select Options >  
Send log > Via text message or Via e-mail (available  
only if the correct e-mail settings are in place).  
Online certif. check—Select to check the online  
certificates before installing an application.  
Default web address—Set the default address used when  
checking online certificates.  
Important: Your device can only support one  
antivirus application. Having more than one application  
with antivirus functionality could affect performance and  
operation or cause the device to stop functioning.  
Some Java applications may require a phone call, a  
message to be sent, or a network connection to a specific  
access point for downloading extra data or components. In  
the App. mgr. main view, scroll to an application, and  
116  
select Options > Suite settings to change settings related  
to that specific application.  
To view detailed information, such as the validity status  
and ability to send the file, scroll to an activation key, and  
press  
.
Activation keys for  
copyright-protected files  
Copyright protections may prevent some images, music  
(including ringing tones), and other content from being  
copied, modified, transferred or forwarded.  
To view the digital rights activation keys stored in your  
device, press  
the following:  
, and select Tools > Actv. keys and from  
Valid keys—View keys that are connected to one or more  
media files and keys whose validity period has not started  
yet.  
Invalid keys—View keys that are not valid; the time period  
for using the media file is exceeded or there is a protected  
media file in the device but no connected activation key.  
Not in use—View keys that have no media files connected  
to them in the device.  
To buy more usage time or extend the usage period for a  
media file, select an invalid activation key and Options >  
Get activation key. Activation keys cannot be updated if  
web service message reception is disabled. See ‘Web  
service messages’, p. 50.  
117  
   
Troubleshooting  
Check that the other device is not in the hidden mode.  
Check that both devices are compatible.  
Q&A  
Access codes  
Q: Why can’t I end a Bluetooth connection?  
Q: What is my password for the lock, PIN, or PUK codes?  
A: If another device is connected to your device, you can either  
end the connection using the other device or by  
deactivating Bluetooth connectivity. Select Connect. >  
Bluetooth > Off.  
A: The default lock code is 12345. If you forget or lose the  
lock code, contact your device dealer.  
If you forget or lose a PIN or PUK code, or if you have not  
received such a code, contact your network service  
provider.  
For information about passwords, contact your access  
point provider, for example, a commercial internet service  
provider (ISP) or wireless service provider.  
Browser services  
Q: What do I do if the following message is displayed: No valid  
access point defined. Define one in Services settings.?  
A: Insert the correct browser settings. Contact your service  
provider for instructions.  
Application not responding  
Camera  
Q: How do I close an application that is not responding?  
A: To open the application switching window, press and hold  
Q: Why do images look smudgy?  
. Scroll to the application, and press  
application.  
to close the  
A: Remove the protective plastic film covering the display and  
camera. Ensure that the camera lens protection window is  
clean.  
Bluetooth connectivity  
Q: Why is there audible noise from the camera when  
Q: Why can’t I find my friend’s device?  
autofocus or optical zoom is used?  
A: Check that both devices have activated Bluetooth  
connectivity.  
A: Zoom and AF lens movement causes mechanical noise.  
Select Options > Settings > Optical zoom during  
recording > Off to eliminate mechanical noise caused  
by lens movement when recording.  
Check that the distance between the two devices is not  
over 10 meters (33 feet) and that there are no walls or  
other obstructions between the devices.  
118  
   
Q: Why do images or videos captured using night mode tend  
to be noisier under dark lighting conditions compared to  
normal mode?  
A: You may have activated a filter, and no communication  
events fitting that filter have been logged. To see all  
events, select My own > Log > Options > Filter > All  
communication.  
A: The output of the image sensor under the dark lighting  
conditions is more amplified with night mode than with  
normal mode to provide better brightness. In return, the  
noise level on the image or video increases.  
Memory low  
Q: What can I do if my device memory is low?  
A: You can delete the following items regularly to avoid  
Q: Why do VGA video frames appear jagged when video  
memory getting low:  
stabilization is activated?  
Messages from Inbox, Drafts, and Sent folders in Messag.  
Retrieved e-mail messages from the device memory  
Saved browser pages  
A: Each video frame is enlarged from a smaller size within VGA  
to the VGA size when video stabilization is activated. Due  
to this, the quality within each frame is degraded  
compared to video without stabilization mode.  
Images and photos in Gallery  
Display  
To delete contact information, calendar notes, call timers, call  
cost timers, game scores, or any other data, go to the  
respective application to remove the data. If you are deleting  
multiple items and one of the following notes are shown: Not  
enough memory to perform operation. Delete some data  
first. or Memory low. Delete some data., try deleting items  
one by one (starting from the smallest item).  
Q: Why do missing, discolored, or bright dots appear on the  
screen every time I turn on my device?  
A: This is a characteristic of this type of display. Some displays  
may contain pixels or dots that remain on or off. This is  
normal, not a fault.  
Home network (UPnP)  
Q: How can I save my data before deleting it?  
Q: Why can’t I share files with other devices?  
A: Save your data using one of the following methods:  
A: Ensure that you have configured the home network  
settings. Select Connect. > Home net. > Share content >  
Content sharing, and the other device is UPnP compatible.  
Use Nokia PC Suite to make a back-up copy of all data to  
a compatible computer.  
Send images to your e-mail address, then save the images  
to your computer.  
Log  
Q: Why does the log appear empty?  
119  
Send data using Bluetooth connectivity to a compatible  
device.  
Store data on a compatible memory card.  
A: To stop the device from making a data connection, select  
Messaging and one of the following:  
On receiving msg. > Defer retrieval—to have the  
multimedia messaging center save the message to be  
retrieved later, for example, after you have checked the  
settings. After this change, the device still needs to send  
information notes to the network. To retrieve the message  
now, select Retr. immediately.  
On receiving msg. > Reject message—to reject all  
incoming multimedia messages. After this change, the  
device needs to send information notes to the network, and  
the multimedia messaging center deletes multimedia  
messages that are waiting to be sent to you.  
Messaging  
Q: Why can’t I select a contact?  
A: The contact card does not have a phone number or an  
e-mail address. Add the missing information to the  
contact card in Contacts.  
Multimedia messaging  
Q: What should I do when the device cannot receive a  
multimedia message because memory is full?  
Multimedia recept. > Off—to ignore all incoming  
multimedia messages. After this change, the device does  
not make any network connections related to multimedia  
messaging.  
A: The amount of memory needed is indicated in the error  
message: Not enough memory to retrieve message.  
Delete some data first. To view what kind of data you  
have and how much memory the different data groups  
consume, select File manager > Options > Memory  
details.  
PC connectivity  
Q: Why do I have problems connecting the device to my PC?  
A: Ensure that Nokia PC Suite is installed and running on your  
PC. See the user guide for Nokia PC Suite on the DVD-ROM.  
For further information on how to use Nokia PC Suite, see  
the help function on Nokia PC Suite or visit the support  
pages at www.nokia.com.  
Q: The note Retrieving message is shown briefly. What is  
happening?  
A: The device is trying to retrieve a multimedia message from  
the multimedia messaging center.  
Check that the settings for multimedia messaging are  
defined correctly and that there are no mistakes in phone  
numbers or addresses. Select Messaging > Options >  
Settings > Multim. msg..  
Q: How can I end the data connection when the device starts  
a data connection again and again?  
120  
Wireless LAN  
Q: Why can't I see a wireless LAN (WLAN) access point even  
though I know I'm within its range?  
A: The WLAN access point may use a hidden service set  
identifier (SSID). You can only access networks that use a  
hidden SSID if you know the correct SSID and have created  
a WLAN internet access point for the network on your  
Nokia device.  
Q: How do I switch wireless LAN (WLAN) off on my Nokia  
device?  
A: You cannot switch off WLAN on your Nokia device. To  
reduce battery consumption, you can specify that your  
Nokia device does not scan for available networks.  
To turn off the background scan:  
1
Press  
Wireless LAN.  
, and select Tools > Settings > Connection >  
2
3
Select Scan for networks > Never.  
To save your changes, select Done.  
When Scan for networks is set to Never, your Nokia device  
still listens to available networks, and you can use available  
WLAN networks as usual.  
121  
Battery information  
Do not short-circuit the battery. Accidental short-circuiting  
can occur when a metallic object such as a coin, clip, or pen  
causes direct connection of the positive (+) and negative (-)  
terminals of the battery. (These look like metal strips on the  
battery.) This might happen, for example, when you carry a  
spare battery in your pocket or purse. Short-circuiting the  
terminals may damage the battery or the connecting object.  
Charging and discharging  
Your device is powered by a rechargeable battery. The full  
performance of a new battery is achieved only after two or  
three complete charge and discharge cycles. The battery can  
be charged and discharged hundreds of times but it will  
eventually wear out. When the talk and standby times are  
noticeably shorter than normal, replace the battery. Use only  
Nokia approved batteries, and recharge your battery only with  
Nokia approved chargers designated for this device.  
Leaving the battery in hot or cold places, such as in a closed  
car in summer or winter conditions, will reduce the capacity  
and lifetime of the battery. Always try to keep the battery  
between 15°C and 25°C (59°F and 77°F). A device with a hot  
or cold battery may not work temporarily, even when the  
battery is fully charged. Battery performance is particularly  
limited in temperatures well below freezing.  
If a replacement battery is being used for the first time or if  
the battery has not been used for a prolonged period, it may  
be necessary to connect the charger then disconnect and  
reconnect it to begin charging the battery.  
Do not dispose of batteries in a fire as they may explode.  
Batteries may also explode if damaged. Dispose of batteries  
according to local regulations. Please recycle when possible.  
Do not dispose as household waste.  
Unplug the charger from the electrical plug and the device  
when not in use. Do not leave a fully charged battery  
connected to a charger, since overcharging may shorten its  
lifetime. If left unused, a fully charged battery will lose its  
charge over time.  
If the battery is completely discharged, it may take a few  
minutes before the charging indicator appears on the display  
or before any calls can be made.  
Nokia battery authentication  
guidelines  
Always use original Nokia batteries for your safety. To check  
that you are getting an original Nokia battery, purchase it from  
an authorized Nokia dealer, look for the Nokia Original  
Use the battery only for its intended purpose. Never use any  
charger or battery that is damaged.  
122  
     
Enhancements logo on the packaging, and inspect the  
hologram label using the following steps:  
3
4
Scratch the side of the label to  
reveal a 20-digit code, for  
example,  
12345678919876543210. Turn  
the battery so that the numbers  
are facing upwards. The 20-digit  
code reads starting from the  
number at the top row followed  
by the bottom row.  
Successful completion of the four steps is not a total  
assurance of the authenticity of the battery. If you have any  
reason to believe that your battery is not an authentic original  
Nokia battery, you should refrain from using it and take it to  
the nearest authorized Nokia service point or dealer for  
assistance. Your authorized Nokia service point or dealer will  
inspect the battery for authenticity. If authenticity cannot be  
verified, return the battery to the place of purchase.  
Authenticate hologram  
Confirm that the 20-digit code is  
valid by following the instructions  
at www.nokia.com/batterycheck.  
1
When looking at the hologram on  
the label, you should see the Nokia  
connecting hands symbol from  
one angle and the Nokia Original  
Enhancements logo when looking  
from another angle.  
To create a text message, enter the  
20-digit code, for example,  
12345678919876543210, and send  
to +44 7786 200276.  
National and international operator charges will apply.  
2
When you angle the hologram  
left, right, down, and up, you  
should see 1, 2, 3, and 4 dots on  
each side respectively.  
You should receive a message indicating whether the code  
can be authenticated.  
What if your battery is not authentic?  
If you cannot confirm that your Nokia battery with the  
hologram on the label is an authentic Nokia battery, please do  
not use the battery. Take it to the nearest authorized Nokia  
service point or dealer for assistance. The use of a battery that  
is not approved by the manufacturer may be dangerous and  
may result in poor performance and damage to your device  
123  
and its enhancements. It may also invalidate any approval or  
warranty applying to the device.  
To find out more about original Nokia batteries, visit  
www.nokia.com/battery.  
124  
Care and maintenance  
Your device is a product of superior design and craftsmanship  
and should be treated with care. The suggestions below will  
help you protect your warranty coverage.  
attachments could damage the device and may violate  
regulations governing radio devices.  
Use chargers indoors.  
Always create a backup of data you want to keep (such as  
contacts and calendar notes) before sending your device  
to a service facility.  
To allow the device to reset, power the device off, and  
remove the battery from time to time for optimum  
performance. Make back-up copies of all important data.  
Keep the device dry. Precipitation, humidity, and all types  
of liquids or moisture can contain minerals that will  
corrode electronic circuits. If your device does get wet,  
remove the battery, and allow the device to dry completely  
before replacing it.  
Do not use or store the device in dusty, dirty areas. Its  
moving parts and electronic components can be damaged.  
Do not store the device in hot areas. High temperatures  
can shorten the life of electronic devices, damage  
batteries, and warp or melt certain plastics.  
All of the above suggestions apply equally to your device,  
battery, charger, or any enhancement. If any device is not  
working properly, take it to the nearest authorized service  
facility for service.  
Do not store the device in cold areas. When the device  
returns to its normal temperature, moisture can form  
inside the device and damage electronic circuit boards.  
Do not attempt to open the device other than as instructed  
in this guide.  
Do not drop, knock, or shake the device. Rough handling  
can break internal circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong  
detergents to clean the device.  
Do not paint the device. Paint can clog the moving parts  
and prevent proper operation.  
Use a soft, clean, dry cloth to clean any lenses (such as  
camera, proximity sensor, and light sensor lenses).  
Use only the supplied or an approved replacement  
antenna. Unauthorized antennas, modifications, or  
125  
 
Additional safety information  
Your device and its enhancements may contain small parts.  
Keep them out of the reach of small children.  
Medical devices  
Operation of any radio transmitting equipment, including  
wireless phones, may interfere with the functionality of  
inadequately protected medical devices. Consult a physician or  
the manufacturer of the medical device to determine if they  
are adequately shielded from external RF energy or if you have  
any questions. Switch off your device in health care facilities  
when any regulations posted in these areas instruct you to do  
so. Hospitals or health care facilities may be using equipment  
that could be sensitive to external RF energy.  
Operating environment  
Remember to follow any special regulations in force in any  
area, and always switch off your device when its use is  
prohibited or when it may cause interference or danger. Use  
the device only in its normal operating positions. This device  
meets RF exposure guidelines when used either in the normal  
use position against the ear or when positioned at least  
2.2 centimeters (7/8 inch) away from the body. When a carry  
case, belt clip, or holder is used for body-worn operation, it  
should not contain metal and should position the device the  
above-stated distance from your body.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
separation of 15.3 centimeters (6 inches) be maintained  
between a wireless phone and a pacemaker to avoid potential  
interference with the pacemaker. These recommendations are  
consistent with the independent research by and  
recommendations of Wireless Technology Research. Persons  
with pacemakers should:  
In order to transmit data files or messages, this device  
requires a good quality connection to the network. In some  
cases, transmission of data files or messages may be delayed  
until such a connection is available. Ensure the above  
separation distance instructions are followed until the  
transmission is completed.  
Always keep the device more than 15.3 centimeters  
(6 inches) from their pacemaker  
Parts of the device are magnetic. Metallic materials may be  
attracted to the device. Do not place credit cards or other  
magnetic storage media near the device, because information  
stored on them may be erased.  
Not carry the device in a breast pocket  
Hold the device to the ear opposite the pacemaker to  
minimise the potential for interference.  
If you suspect interference, switch off your device, and move  
the device away.  
126  
 
of the aircraft, disrupt the wireless telephone network, and  
may be illegal.  
Hearing aids  
Some digital wireless devices may interfere with some hearing  
aids. If interference occurs, consult your service provider.  
Potentially explosive environments  
Vehicles  
Switch off your device when in any area with a potentially  
explosive atmosphere, and obey all signs and instructions.  
Potentially explosive atmospheres include areas where you  
would normally be advised to turn off your vehicle engine.  
Sparks in such areas could cause an explosion or fire resulting  
in bodily injury or even death. Switch off the device at  
refueling points such as near gas pumps at service stations.  
Observe restrictions on the use of radio equipment in fuel  
depots, storage, and distribution areas, chemical plants or  
where blasting operations are in progress. Areas with a  
potentially explosive atmosphere are often but not always  
clearly marked. They include below deck on boats, chemical  
transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), and areas where  
the air contains chemicals or particles such as grain, dust, or  
metal powders.  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles such as  
electronic fuel injection systems, electronic antiskid (antilock)  
braking systems, electronic speed control systems, and air bag  
systems. For more information, check with the manufacturer  
or its representative of your vehicle or any equipment that has  
been added.  
Only qualified personnel should service the device, or install  
the device in a vehicle. Faulty installation or service may be  
dangerous and may invalidate any warranty that may apply to  
the device. Check regularly that all wireless device equipment  
in your vehicle is mounted and operating properly. Do not store  
or carry flammable liquids, gases, or explosive materials in the  
same compartment as the device, its parts, or enhancements.  
For vehicles equipped with an air bag, remember that air bags  
inflate with great force. Do not place objects, including  
installed or portable wireless equipment in the area over the  
air bag or in the air bag deployment area. If in-vehicle wireless  
equipment is improperly installed and the air bag inflates,  
serious injury could result.  
Emergency calls  
Important: Wireless phones, including this device,  
operate using radio signals, wireless networks, landline  
networks, and user-programmed functions. Because of this,  
connections in all conditions cannot be guaranteed. You  
should never rely solely on any wireless device for essential  
communications like medical emergencies.  
Using your device while flying in aircraft is prohibited. Switch  
off your device before boarding an aircraft. The use of wireless  
teledevices in an aircraft may be dangerous to the operation  
127  
The exposure guidelines for mobile devices employ a unit of  
measurement known as the Specific Absorption Rate or SAR.  
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/  
kilogram (W/kg) averaged over 10 grams of tissue. Tests for  
SAR are conducted using standard operating positions with  
the device transmitting at its highest certified power level in  
all tested frequency bands. The actual SAR level of an  
operating device can be below the maximum value because  
the device is designed to use only the power required to reach  
the network. That amount changes depending on a number of  
factors such as how close you are to a network base station.  
The highest SAR value under the ICNIRP guidelines for use of  
the device at the ear is 0.54 W/kg.  
To make an emergency call:  
1 If the device is not on, switch it on. Check for adequate  
signal strength.  
Some networks may require that a valid SIM card is  
properly inserted in the device.  
2
3
4
Press  
as many times as needed to clear the display  
and ready the device for calls.  
Enter the official emergency number for your present  
location. Emergency numbers vary by location.  
Press the  
key.  
If certain features are in use, you may first need to turn those  
features off before you can make an emergency call. Consult  
this guide or your service provider for more information.  
Use of device accessories and enhancements may result in  
different SAR values. SAR values may vary depending on  
national reporting and testing requirements and the network  
band. Additional SAR information may be provided under  
product information at www.nokia.com.  
When making an emergency call, give all the necessary  
information as accurately as possible. Your wireless device  
may be the only means of communication at the scene of an  
accident. Do not end the call until given permission to do so.  
Certification information (SAR)  
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO  
RADIO WAVES.  
Your mobile device is a radio transmitter and receiver. It is  
designed not to exceed the limits for exposure to radio waves  
recommended by international guidelines. These guidelines  
were developed by the independent scientific organization  
ICNIRP and include safety margins designed to assure the  
protection of all persons, regardless of age and health.  
128  
Index  
settings for call diverting 112  
transferring 64  
camera  
copying contacts 68  
copyright protection. See activation  
keys.  
A
access points 106  
activation keys 117  
alarm clock 16  
applications 114, 115  
adjusting lighting and color 28  
editing videos 31  
flash 28  
image setup settings 28  
imaging mode 12  
saving video clips 23  
scenes 28  
D
data connections  
ending 92  
B
indicators 15  
date 16  
device manager 92  
digital rights management. See  
activation keys.  
backing up 20  
Bluetooth 83  
device address 86  
headset 113  
pairing 86  
self-timer 27  
sequence mode 27  
still image camera settings 26  
video recorder settings 24  
security 85  
switching off 87  
bookmarks 70  
E
editing videos 31, 32  
e-mail 47  
certificates 110  
automatic retrieving 51  
opening 51  
remote mailbox 50  
retrieving from mailbox 50  
settings 54  
C
clear screen. See standby mode.  
clock 16, 17  
cache, clearing 72  
calendar 74  
call register. See log.  
calls  
codes 109, 110  
computer connections 83  
conference call 57  
connection settings 106  
contact cards  
viewing attachments 51  
dialled numbers 64  
duration 65  
international 57  
received 64  
settings 105  
F
file formats  
inserting pictures 67  
sending 67  
storing DTMF tones 64  
.jad, jar and sis 114  
.jar 115  
129  
 
RealPlayer 78  
file manager 21  
fixed dialing 68  
FM radio 76  
mailbox 50, 51  
media files 78, 79  
memory 21, 65  
memory card 20  
menu, rearranging 100  
messaging 47  
Q
Quickoffice 95  
R
G
radio 76  
gallery 30  
RealPlayer 78  
backup files 43  
ordering files in albums 35, 36  
presentations 34  
TV out mode 34  
remote mailbox 50  
remote SIM mode 85  
ringing tones  
modem 93  
modes 11, 12  
movies, muvees 81  
multimedia messages 47  
music player 39  
transferring music 40  
personal ringing tone 69  
receiving in a text message 49  
H
handsfree. See loudspeaker.  
headset settings 113  
help application 22  
home network 19  
S
security code. See lock code.  
sending  
N
Nokia PC Suite  
contact and business cards 67  
video clips 33  
service commands 45  
settings  
calendar data 74  
transferring music files to your  
memory card 39  
I
IAP. See access points.  
indicators 15  
internet. See web.  
viewing device memory data 22  
access codes 109  
access points 106  
Bluetooth connectivity 84  
calendar 75  
call barring 112  
call diverting 112  
certificates 110  
data connections 106  
date and time 109  
O
J
office applications 95  
Java. See applications. 114  
P
L
packet data connections 108  
PC connections 83  
personalization 101  
phonebook  
lock code 110  
log 66  
loopset settings 113  
loudspeaker 16  
See contact cards  
130  
display 104  
language 103  
time 16  
lock code 110  
transferring content 14  
transferring music 40  
original settings 104  
personalizing the device 100  
PIN code 110  
screen saver 104  
UPIN code 110  
U
UPIN code 110  
UPnP 19, 88  
UPUK code 110  
USSD commands 45  
UPUK code 110  
shortcuts 13  
SIM card  
copying names and numbers 68  
messages 52  
sis file 114  
snooze 16  
software 115  
songs  
transferring 40  
sound clips 30  
sounds  
muting a ringing tone 63  
recording sounds 94  
speed dialling 58  
V
video call 59, 63  
video clips 30  
video player. See RealPlayer.  
Visual Radio 76, 77  
voice commands 114  
voice dialling 58  
voice mailbox 57, 112  
voice messages 57  
voice tags 58, 114  
volume control 16, 57  
W
web 70  
wireless LAN 17  
access point settings 107  
create IAP 92  
security 88  
standby mode 100  
svg files 34  
synchronization 91  
T
See also UPnP.  
text messages 47  
131  

Troy Bilt 410 420 User Manual
Sony Radio Cassette Player FX485 User Manual
Sony CD Player D 150AN User Manual
Siemens RS 485 User Manual
Seagate SEATOOLS ST3160212ACE User Manual
Seagate BARRACUDA 9 ST19171W User Manual
Samsung SGH i637 User Manual
PYLE Audio PDJ150U User Manual
Philips AK 703 User Manual
Philips AE2170 User Manual