10. CUE BUTTON
The CUE function allows the CD to be played from the memorized point any numbers of times,
with the unit in pause mode. Press the CUE button to set up the memorized CUE point and then
the CUE button blinks.
11. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
12. PITCH BEND +/- BUTTON
When each of the two CD Players is Playing,the pitch bend function allows the position of the
BASS beat to be matched after the pitch has been adjusted
13. PITCH BUTTON
If you push this button, the adjustement of the pitch potentiometer is available.
14. DISPLAY
LCD Display Indicate the Track/Numbers//Time/Remain/Pitch/Continue/Single。
15. REMOTE SENSOR
16. USB/SD
Selector switches USB/SD for selecting a storage media in pauses or cue mode. The LEDs will
verify which storage media is active
17. GAIN CONTROL
Adjust the input signal for the microphone
18. MASTER CONTROL
Determines the overall level of the unit.
19. LEVEL CONTROL FOR THE HEADPHONES
20. HEADPHONES INPUT
3.5mm jack for connecting stereo headphones.
21. TRACK/FOLDER SELECTION
Press the control to indicate the name of the folder currently sexed.
22. MICROPHONE INPUT
Input jack (3-pin XLR, bal.) for connecting a microphone.
23.
3 IN 1 CARD SLOT
Slot for inserting 3 IN 1 card. The contacts of the card must point downwards. The unit cannot
read cards with a capacity of more than 4GB. The unit is not compatible to SDHC cards and only
supports the MP3 format.
24. USB PORT
Support USB playing and you may also connect the computer with the USB cable but only when
enter into USB work mode.
3
Connection:
25. AC CONNECTION
Plug in the supplied power cable here.
26. LINE OUTPUT
Stereo master outputs (optionally 3-pin XLR or RCA) for connecting an amplifier, a mixer or other
units with line level inputs.
WARRANTY CONDITIONS
PLYE PRO equipment is covered by a 1-year warranty on parts and labour except for faders (90
days).
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by PLYE PRO are allowed to work on the equipment. Warranty becomes
void when other service technicians open the equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
PLYE PRO will return the goods by pre-paid mail during the first year of warranty; thereafter the
mailing cost is to be paid by the recipient.
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal
use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
SPECIFICATIONS:
Anti-Shock Buffer Memory:
Range of adjustments:
Power supply:
40 seconds
+/- 24%
~ 80-260V, 60/50Hz
Player : 482x90x255mm
Dimensions :
4
|