Nokia E75 User Guide
Issue 1
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for details, and
availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to
law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved
by Nokia could void the user's authority to operate this equipment.
/Issue 1 EN
Contents
Safety..............................................................12 Nokia E75 - The basics....................................25
About your device...............................................................12 Welcome..............................................................................25
Network services................................................................13 Settings wizard...................................................................25
Menu....................................................................................25
Quick start guide............................................14
Display indicators...............................................................26
SIM card, battery, charging, memory card.......................14 Write text.............................................................................27
Insert the SIM card and battery......................................14
Write text with the keyboard.........................................27
Predictive text input........................................................28
Charge the battery...........................................................15
Insert the memory card..................................................15 Search..................................................................................28
Eject the memory card....................................................16
First start-up........................................................................16
Keys and parts.....................................................................17
Keys and parts..................................................................17
Keys and parts (sides)......................................................17
Search................................................................................28
Start a search....................................................................28
Search results...................................................................28
Search services.................................................................29
Search settings.................................................................29
One-touch keys.................................................................18 Common actions in several applications..........................29
Keyboard...........................................................................18 Volume control....................................................................30
Lock the keys.......................................................................19 Free memory.......................................................................30
Accessories..........................................................................19
Personalisation..............................................31
Connect the headset........................................................19
Attach a wrist strap.........................................................20 Profiles ................................................................................31
Home screen........................................................................20 Select ringing tones............................................................31
Nokia Switch.......................................................................20 Customise profiles..............................................................32
Transfer content...............................................................20 Personalise the home screen............................................32
Synchronise, retrieve, or send content..........................21 Change the display theme.................................................33
Set up your e-mail..............................................................22 Download a theme.............................................................33
Antennas..............................................................................22 Change audio themes.........................................................33
Nokia PC Suite.....................................................................23 3-D ringing tones ...............................................................33
Tips for efficient use...........................................................23
New from Nokia Eseries.................................35
Support................................................................................24
Key features.........................................................................35
Home screen........................................................................36
Home screen.....................................................................36
Work on the home screen...............................................36
One-touch keys...................................................................37
Home key..........................................................................37
Calendar key.....................................................................37
Search for e-mail messages............................................45
Delete e-mails..................................................................46
Switch between e-mail folders.......................................46
Disconnect from the mailbox.........................................46
Set on an out-of-office reply...........................................46
General e-mail settings...................................................46
E-mail key.........................................................................37 Message reader...................................................................46
Turn and tap to silence calls or alarms.............................37 Speech..................................................................................47
Calendar...............................................................................38 Text and multimedia messages........................................47
About Calendar.................................................................38
Create calendar entries...................................................38
Create meeting requests.................................................38
Calendar views.................................................................39
Contacts...............................................................................39
About Contacts.................................................................39
Write and send messages...............................................47
Text messages on the SIM card......................................48
Receive and reply to multimedia messages..................49
Create presentations.......................................................49
View presentations..........................................................50
View and save multimedia attachments.......................50
Work with contacts..........................................................40 Special message types.......................................................50
Create contact groups.....................................................40
Search for contacts in a remote database.....................40
Service messages.............................................................50
Send service commands..................................................51
Add ringing tones for contacts.......................................40 Cell broadcast......................................................................51
Change Contacts settings................................................41 Messaging settings.............................................................51
Multitasking.........................................................................41
Open Ovi with Nokia E75 ...................................................41
Text message settings.....................................................51
Multimedia message settings.........................................52
User settings..................................................................53
Retrieval settings..........................................................53
Automatic retrieval settings........................................54
Service message settings................................................54
Cell broadcast settings....................................................54
Other settings...................................................................54
Messaging.......................................................43
Messaging folders...............................................................43
Organise messages.............................................................44
E-mail...................................................................................44
Set up your e-mail............................................................44
Send e-mail.......................................................................44
Add attachments..............................................................45 Instant messaging..............................................................54
Read e-mail.......................................................................45
Download attachments...................................................45
Reply to a meeting request............................................45
About Instant messaging................................................54
IM views............................................................................55
Connect to an IM server...................................................55
Start a new conversation................................................55 Bar net calls.........................................................................66
View and start conversations.........................................55 Send DTMF tones.................................................................66
Change your own status..................................................56 Talking theme.....................................................................67
Modify your personal IM preferences.............................56 Voice commands.................................................................67
Retrieve IM contact lists..................................................56
Record chats.....................................................................56
Search for IM groups and users......................................57
IM groups..........................................................................57
Make a call........................................................................67
Launch an application.....................................................68
Change profiles................................................................68
Voice command settings.................................................68
IM server settings.............................................................57 Push to talk.........................................................................68
About push to talk...........................................................69
Phone.............................................................59
Voice calls............................................................................59
Answer a call....................................................................59
Make a call........................................................................59
Make a conference call....................................................60
Voice mail ...........................................................................60
Video calls............................................................................60
About video calls..............................................................60
Make a video call..............................................................61
Video sharing......................................................................61
Video sharing settings.....................................................62
Share live video or video clips........................................62
Accept an invitation.........................................................63
Log in and exit PTT..........................................................69
Make and receive a PTT call............................................69
Make a one-to-one call.................................................69
Make a group call..........................................................70
Answer a PTT call..........................................................70
Callback requests.............................................................70
PTT groups........................................................................70
Channels.........................................................................70
Network groups............................................................70
Create a channel group................................................71
Respond to a channel invitation.................................71
View the PTT log..............................................................71
PTT settings......................................................................72
Internet calls.......................................................................63 Log........................................................................................72
About internet calls.........................................................63
Activate internet calls......................................................64
Make internet calls ..........................................................64
Blocked contacts..............................................................64
Manage internet call services.........................................64
Internet call settings.......................................................65
Call and data registers.....................................................72
Monitor all communications...........................................72
Call and send messages from Log..................................73
Log settings......................................................................73
Internet..........................................................74
Speed dialling.....................................................................65 Web browser ......................................................................74
Call divert.............................................................................65
Call barring..........................................................................66
Browse the web...............................................................74
Browser toolbar...............................................................75
Navigate pages................................................................75
Web feeds and blogs.......................................................76
Widgets.............................................................................76
Content search.................................................................76
Download and purchase items.......................................76
Bookmarks........................................................................77
Empty the cache...............................................................77
End the connection..........................................................78
Connection security.........................................................78
Web settings.....................................................................78
Browse the intranet ..........................................................79
Download!...........................................................................79
Manage items...................................................................79
Subscriptions....................................................................80
Download! search............................................................80
Purchase history...............................................................80
Download! settings..........................................................80
Connect PC to web..............................................................80
Move on a map.................................................................86
Display indicators.............................................................86
Find locations...................................................................87
Plan a route......................................................................87
Save and send locations..................................................88
View your saved items....................................................88
Navigate to the destination............................................88
Walk to your destination................................................89
Drive to your destination................................................89
Traffic information...........................................................89
Travel guides....................................................................90
Maps settings...................................................................90
Internet settings..............................................................90
Navigation settings.........................................................90
Route settings..................................................................91
Map settings.....................................................................91
Update maps....................................................................91
Nokia Map Loader............................................................91
Shortcuts...........................................................................92
Travelling.......................................................82
Nokia Office Tools...........................................93
Positioning (GPS)................................................................82
About GPS.........................................................................82 Active notes.........................................................................93
Tips on creating a GPS connection.................................83 Calculator.............................................................................93
Position requests.............................................................84 File manager.......................................................................94
Landmarks .......................................................................84
GPS data............................................................................84
Route guidance.............................................................84
Retrieve position information.....................................85
About File manager.........................................................94
Find and organise files....................................................94
Manage a memory card...................................................94
Back up files to a memory card......................................95
Trip meter......................................................................85 Quickoffice...........................................................................95
Maps.....................................................................................85
Maps..................................................................................85
About Quickoffice.............................................................95
Work with files.................................................................95
Network positioning.......................................................86 Converter.............................................................................95
Convert measurements...................................................95
Manage image files........................................................104
Set base currency and exchange rate............................95 Share online......................................................................105
Zip manager........................................................................96
PDF reader...........................................................................96
Printing................................................................................96
File printing......................................................................96
Print files........................................................................96
Printing options............................................................97
Printer settings..............................................................97
Image print.......................................................................97
Connect to printer.........................................................97
Print preview.................................................................97
Image print view...........................................................98
Clock.....................................................................................98
Alarm clock.......................................................................98
Share online...................................................................105
Subscribe to services.....................................................105
Manage your accounts..................................................105
Create a post..................................................................105
Post files from Gallery...................................................106
One-click upload............................................................106
Tag list............................................................................106
Manage posts in Outbox...............................................106
View service content.....................................................106
Service provider settings..............................................107
Edit account settings.....................................................107
Edit advanced settings..................................................107
Data counters.................................................................107
World clock.......................................................................98 Nokia Video Centre...........................................................108
Clock settings....................................................................98
Dictionary............................................................................99
Notes ...................................................................................99
View and download video clips...................................108
Video feeds.....................................................................109
My videos........................................................................109
Transfer videos from your PC.......................................109
Nokia Podcasting..............................................................110
Play and manage podcasts...........................................110
Directories......................................................................111
Search podcasts.............................................................111
Podcasting settings.......................................................111
Camera...............................................................................101
Capture an image..........................................................101
Scenes.............................................................................102
Capture images in a sequence......................................102
View captured image....................................................102 Music player......................................................................112
Record videos.................................................................102
Play a video clip.............................................................102
Image settings...............................................................103
Video settings................................................................103
Gallery................................................................................104
Work with media files and folders...............................104
Play a song or a podcast episode.................................112
Playlists...........................................................................112
Nokia Music Store..........................................................112
Transfer music from PC.................................................113
Transfer with Windows Media Player..........................113
Preset frequency settings.............................................114
View images...................................................................104 RealPlayer..........................................................................114
Play video clips and stream links.................................114 Fast downloading.............................................................124
View information about a media clip..........................115 Data cable..........................................................................124
RealPlayer settings........................................................115 Bluetooth...........................................................................125
Recorder............................................................................115
Flash player.......................................................................115
FM radio.............................................................................116
Listen to the radio.........................................................116
Saved stations................................................................116
About Bluetooth.............................................................125
Send and receive data with Bluetooth........................125
Pair devices....................................................................126
Block devices..................................................................127
Security tips....................................................................127
FM radio settings...........................................................117 SIM access profile..............................................................127
Nokia Internet Radio........................................................117 Wireless LAN......................................................................128
Listen to internet radio stations..................................117
Favourite stations..........................................................118
Search for stations.........................................................118
WLAN connections.........................................................128
See WLAN availability....................................................129
WLAN wizard .................................................................129
Station directory............................................................118 Connection manager........................................................130
Internet radio settings..................................................118
N-Gage...............................................................................119
About N-Gage.................................................................119
N-Gage views..................................................................119
View and end active connections................................130
Search for WLAN.............................................................130
Security and data management...................131
Get started......................................................................120 Lock the device.................................................................131
Create a player name..................................................120 Memory card security.......................................................131
Start a game................................................................120 Encryption.........................................................................132
Track your progress....................................................120
Encrypt device memory or memory card....................132
Play and manage games...............................................121 Fixed dialling.....................................................................132
Edit profile details.........................................................121 Certificate manager..........................................................133
Connect with other players...........................................121
Find and add friends...................................................122
View certificate details..................................................133
Certificate trust settings................................................134
View friend information.............................................122 View and edit security modules......................................134
Sort the friends list.....................................................122 Remote configuration......................................................134
Rate a player................................................................122 Application manager........................................................135
Send messages............................................................122
N-Gage settings..............................................................122
Install applications........................................................136
Remove applications and software.............................137
Application manager settings......................................137
Software updates.............................................................137
Connectivity..................................................124
Application Update...........................................................138
Licenses.............................................................................138
About Licenses...............................................................138
Use licenses....................................................................139
Sync....................................................................................139
Mobile VPN........................................................................140
Manage VPN....................................................................140
Edit VPN access points...................................................140
Use a VPN connection in an application......................141
Create access point groups........................................148
Packet data access points..........................................149
WLAN internet access points.....................................149
Packet data (GPRS) settings..........................................150
WLAN settings................................................................150
Advanced WLAN settings..............................................151
WLAN security settings..................................................151
WEP security settings....................................................151
WEP key settings............................................................152
802.1x security settings................................................152
WPA security settings....................................................152
Wireless LAN plugins.....................................................152
EAP plug-ins.................................................................152
Use EAP plug-ins..........................................................153
Session initiation protocol (SIP) settings....................153
Edit SIP profiles..............................................................153
Edit SIP proxy servers....................................................153
Edit registration servers................................................154
Configuration settings...................................................154
Settings........................................................142
General settings................................................................142
Personalisation settings...............................................142
Display settings...........................................................142
Tone settings...............................................................143
Language settings......................................................143
Scroll key lights...........................................................143
Settings for One-touch keys.......................................143
Date and time settings..................................................144
Sensor settings...............................................................144 Application settings.........................................................155
Security settings............................................................144
Shortcuts......................................................156
About security settings..............................................144
Device and SIM card security......................................145 General shortcuts..............................................................156
Restore original settings...............................................145
Glossary........................................................159
Troubleshooting...........................................162
Accessories...................................................165
Battery..........................................................166
Positioning settings......................................................145
Slide handling................................................................145
E-mail key settings........................................................145
Telephone settings...........................................................146
Call settings....................................................................146
Network settings...........................................................147
Connection settings..........................................................147
Access points..................................................................147 Battery and charger information....................................166
Create a new access point..........................................147 Nokia battery authentication guidelines.......................167
Authenticate hologram.................................................167
What if your battery is not authentic?........................167
Care and maintenance.................................169
Recycle...............................................................................169
Additional safety information.....................171
Small children...................................................................171
Operating environment...................................................171
Medical devices.................................................................171
Implanted medical devices...........................................171
Hearing aids...................................................................172
Hearing aids......................................................................172
Vehicles..............................................................................172
Potentially explosive environments...............................173
Emergency calls................................................................173
Certification information (SAR).......................................174
Index............................................................175
Safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do
not connect incompatible products.
SWITCH ON SAFELY
WATER-RESISTANCE
Do not switch the device on when wireless
phone use is prohibited or when it may cause
interference or danger.
Your device is not water-resistant. Keep it dry.
ROAD SAFETY COMES FIRST
About your device
Obey all local laws. Always keep your hands free
to operate the vehicle while driving. Your first
consideration while driving should be road
safety.
The wireless device described in this guide is approved for
use on the (E)GSM 850, 900, 1800, and 1900 networks, and
UMTS 850/1900/2100 HSDPA networks. Contact your
service provider for more information about networks.
INTERFERENCE
All wireless devices may be susceptible to
When using the features in this device, obey all laws and
respect local customs, privacy and legitimate rights of
others, including copyrights.
interference, which could affect performance.
SWITCH OFF IN RESTRICTED AREAS
Copyright protection may prevent some images, music,
and other content from being copied, modified, or
transferred.
Follow any restrictions. Switch the device off in
aircraft, near medical equipment, fuel,
chemicals, or blasting areas.
Your device supports several methods of connectivity. Like
computers, your device may be exposed to viruses and
other harmful content. Exercise caution with messages,
connectivity requests, browsing, and downloads. Only
install and use services and other software from
QUALIFIED SERVICE
Only qualified personnel may install or repair
this product.
12
trustworthy sources that offer adequate security and
protection against harmful software, such as applications networks; other networks may require that you make
that are Symbian Signed or have passed the Java Verified™ specific arrangements with your service provider before
testing. Consider installing antivirus and other security
you can use the network services. Using network services
involves transmission of data. Check with your service
provider for details about fees in your home network and
when roaming on other networks. Your service provider
can give you instructions and explain what charges will
apply. Some networks may have limitations that affect
how you can use network services. For instance, some
networks may not support all language-dependent
characters and services.
software on your device and any connected computer.
Your device may have preinstalled bookmarks and links for
third-party internet sites. You may also access other third-
party sites through your device. Third-party sites are not
affiliated with Nokia, and Nokia does not endorse or
assume liability for them. If you choose to access such
sites, you should take precautions for security or content.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
these features will not appear on your device menu. Your
device may also have a special configuration such as
changes in menu names, menu order, and icons. Contact
your service provider for more information.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on. Do
not switch the device on when wireless device use may
cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed or
modified.
This device supports WAP 2.0 protocols (HTTP and SSL) that
run on TCP/IP protocols. Some features of this device, such
as e-mail, browsing, and multimedia messaging (MMS),
require network support for these technologies.
Remember to make back-up copies or keep a written
record of all important information stored in your device.
When connecting to any other device, read its user guide
for detailed safety instructions. Do not connect
incompatible products.
The images in this guide may differ from your device
display.
Network services
To use the device you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on all
13
Quick start guide
Your Nokia E75 is a business device that adapts to your free
time as well.
Read these first pages to get started, then use the rest of
the guide to explore what new features Nokia E75 brings
to you.
SIM card, battery,
3. Insert the SIM card. Ensure the contact area on the card
is facing the connectors on the device and that the
bevelled corner is facing the top of the device.
charging, memory card
Put the pieces together, and get started with your Nokia
E75.
Insert the SIM card and battery
1. To open the back cover of the device, with the back
facing you, unlock the back cover release button, and
lift the back cover.
4. Align the contacts of the battery with the
corresponding connectors on the battery
compartment, and insert the battery in the direction
of the arrow.
14
2. If the battery is inserted, lift the battery in the direction
of the arrow to remove it.
To reach the full operation time, charge the battery until
it has been fully charged according to the battery level
indicator.
Tip: If you have old compatible Nokia chargers, you
can use them with the Nokia E75 by attaching the
CA-44 charger adapter to the old charger. The
adapter is available as a separate enhancement.
5. Close the back cover.
USB charging
You can use USB charging when a wall outlet is not
available. When charging your device with the USB cable,
the charging time is longer.
With USB charging, you can also transfer data with USB
cable while charging the device.
1. Connect a compatible USB device to your device using
a compatible USB cable.
Charge the battery
Depending on the type of the device that is used for
Your battery has been precharged, but the charging levels
may vary.
charging, it may take a while for charging to start.
2. If the device is switched on, select from the available
USB mode options on the display of the device.
1. Connect the charger to a wall outlet.
2. Connect the charger to the device. You can use your
device while it is charging.
Insert the memory card
Use a memory card to save the memory on your device.
You can also back up information from your device to the
memory card.
Use only compatible microSD cards approved by Nokia for
use with this device. Nokia uses approved industry
standards for memory cards, but some brands may not be
fully compatible with this device. Incompatible cards may
damage the card and the device and corrupt data stored
on the card.
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet.
15
Keep all memory cards out of the reach of small
children.
2. Open the cover of the memory card slot.
3. Press the end of the memory card to release it from the
Check the compatibility of a memory card with
memory card slot, and remove the card.
its manufacturer or provider.
4. Close the cover of the memory card slot.
A compatible memory card may be included in the
sales package. The memory card may be already
inserted in the device. If not, do the following:
First start-up
1. Open the cover of the memory card slot.
1. Press and hold the power key
until you feel the device vibrate.
2. If prompted, enter the PIN code
or lock code, and select OK.
3. When prompted, enter the country in which you are
located and the current date and time. To find your
country, enter the first letters of the country name. It
is important to select the correct country, because
scheduled calendar entries may change if you change
the country later and the new country is located in a
different time zone.
2. Insert the memory card in the slot with the contact
area first. Ensure the contact area is facing the
connectors on the device.
3. Push the card in until it locks into place.
4. Close the cover of the memory card slot.
4. The Welcome application opens. Select from the
available options, or select No to close the application.
To open the Welcome application later, select Menu >
Help > Welcome.
Eject the memory card
To configure the various settings in your device, use the
wizards available in the home screen and the Settings
wizard application. When you switch the device on, it may
recognise the SIM card provider and configure some
settings automatically. You can also contact your service
provider for the correct settings.
Important: Do not remove the memory card in the
middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may
damage the memory card as well as the device, and data
stored on the card may be corrupted.
You can switch the device on without inserting a SIM card.
The device starts up in offline mode, and you cannot use
the network-dependent phone functions.
1. Press the power key briefly, and select Remove
16
memory card.
To switch the device off, press and hold the power key.
8 — Charger connector
9 — E-mail key
10 — Power/End key. Press and hold the key to switch the
device on or off. During a call, press the end key to reject
a call or end active and held calls, or press and hold to end
data connections.
Keys and parts
Keys and parts
11 — Selection key
12 — Backspace key. Press the key to delete items.
13 — Secondary camera
14 — Headset connector
1 — Mirror
2 — Flash
3 — Main camera
4 — Loudspeaker
1 — Light sensor
2 — Earpiece
Keys and parts (sides)
3 — Navi™ key; hereafter referred to as scroll key. Press
the scroll key to make a selection, or to scroll left, right,
up, or down on the display. Press and hold the scroll key
to accelerate the scrolling.
4 — Home key
5 — Selection key. Press the selection key to perform the
function displayed above it.
6 — Call key
17
7 — Calendar key
1 — Micro USB connector
2 — Memory card slot
Calendar key (2) Open the
Calendar
Create a new
meeting entry
application
3 — Volume up/Zoom in key
4 — Mute/Push to talk key
5 — Volume down/Zoom out key
6 — Capture key
E-mail key (3)
Open your default Create a new e-
mailbox mail message
Keyboard
Your device has a full keyboard. To
open the keyboard, slide the keyboard
out. In all applications, the screen
rotates automatically from portrait to
landscape when you slide the
keyboard out.
One-touch keys
With One-touch keys, you can access applications and
tasks quickly.
To change the assigned application or task, select Menu >
Control panel > Settings and General >
Personalisation > One-touch keys. Your service
provider may have assigned applications to the keys, in
which case you cannot change them.
1 — Home key
2 — Calendar key
3 — E-mail key
1 — Function key. To insert digits or characters printed at
the top of keys, press and hold the function key and press
the corresponding key, or press and hold the
corresponding key only. To enter only the characters
printed at the top of keys, press the function key twice
quickly. To return to normal mode, press the function key
again.
Key
Home key (1)
Press quickly
Press and hold
Access the home View the list of
screen
active
2 — Shift key. To switch between the different character
cases, press the Shift key. To enter only uppercase or
lowercase letters, press the Shift key twice quickly.
applications
18
3 — Chr key. When writing text, press the Chr key to insert To lock the keys manually in the
characters not shown on the keyboard.
4 — Space key
home screen, press the left
selection key and *.
To unlock the keys, press the left
5 — Ctrl key. To access the shortcuts behind the Ctrl key,
selection key and *.
such as Ctrl + C.
6 — Backspace key
When you slide the full keyboard out for the first time, you
are asked to define the slide settings.
To access the slide settings later, select Menu > Control
panel > Settings and General > Slide handling.
Lock the keys
When the device or keypad is locked, calls may be possible
to the official emergency number programmed into your
device.
The keypad of your device locks automatically to prevent
the keys from being accidentally pressed. To change the
period after which the keypad is locked, select Menu >
Control panel > Settings and General > Security >
Phone and SIM card > Keypad autolock period.
Accessories
You can connect your device to a range of compatible
accessories. Check the availability of the approved
accessories with your dealer.
Connect the headset
Warning: When you use the headset, your ability to
hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
Connect the compatible headset to the headset connector
of your device.
19
The home screen
consists of the
following:
1. Application
shortcuts. To access
an application,
select the shortcut
of the application.
2. Information area.
To check an item
displayed in the information area, select the item.
3. Notification area. To view the notifications, scroll to a
box. A box is only visible if there are items in it.
You can define two separate home screens for different
purposes, for example, one screen to show your business
e-mail and notifications, and another to show your
personal e-mail. This way, you do not have to see business-
related messages outside office hours.
Attach a wrist strap
Thread the wrist strap, and tighten
it.
To switch between the home screens, select
.
To define which items and shortcuts you want in the home
screen, and to set the appearance of the home screen,
select Menu > Control panel and Modes.
Home screen
In the home screen, you can quickly access your most
frequently used applications, and view at a glance if you
have missed calls or new messages.
Nokia Switch
Whenever you see the
icon, scroll right to access a list
Transfer content
of available actions. To close the list, scroll left.
You can use the Switch application to copy content such
as phone numbers, addresses, calendar items, and images
from your previous Nokia device to your device.
20
The type of content that can be transferred depends on
the model of the device from which you want to transfer
content. If that device supports synchronisation, you can
also synchronise data between the devices. Your device
notifies you if the other device is not compatible.
When the transfer has started, you can cancel it and
continue later.
Content is transferred from the memory of the other
device to the corresponding location in your device. The
transfer time depends on the amount of data to be
transferred.
If the other device cannot be switched on without a SIM
card, you can insert your SIM card in it. When your device
is switched on without a SIM card, the Offline profile is
automatically activated, and transfer can be done.
Synchronise, retrieve, or send
Transfer content for the first time
content
1. To retrieve data from the other device for the first time,
on your device, select Phone switch in the Welcome
application, or select Menu > Control panel >
Switch.
Select Menu > Control panel > Switch.
After the first transfer, select from the following to start a
new transfer, depending on the model:
to synchronise content between your device and the
other device, if the other device supports synchronisation.
The synchronisation is two-way. If an item is deleted in
one device, it is deleted in both. You cannot restore
deleted items with synchronisation.
2. Select the connection type you want to use to transfer
the data. Both devices must support the selected
connection type.
3. If you select Bluetooth connectivity as the connection
type, connect the two devices. To have your device
search for devices with Bluetooth connectivity, select
Continue. Select the device from which you want to
to retrieve content from the other device to your
device. With retrieval, content is transferred from the
transfer content. You are asked to enter a code on your other device to your device. You may be asked to keep or
device. Enter a code (1-16 digits), and select OK. Enter delete the original content in the other device, depending
the same code on the other device, and select OK. The on the device model.
devices are now paired.
to send content from your device to your other device
Some earlier Nokia devices may not have the Switch
application. In this case, the Switch application is sent
to the other device as a message. To install the Switch
application on the other device, open themessage, and
follow the instructions on the display.
If you cannot send an item, depending on the type of the
other device, you can add the item to the Nokia folder, to
C:\Nokia or E:\Nokia in your device. When you select the
folder to transfer, the items are synchronised in the
corresponding folder in the other device, and vice versa.
4. On your device, select the content you want to transfer
21
from the other device.
accounts, such as Google's e-mail services. The wizard
supports POP/IMAP, ActiveSync, and Intellisync protocols.
Use shortcuts to repeat a transfer
After a data transfer, you can save a shortcut with the
transfer settings to the main view to repeat the same
transfer later.
If you are setting up your business e-mail, ask your
company IT department for details. If you are setting up
your internet e-mail, see your e-mail service provider’s
website for details.
To edit the shortcut, select Options > Shortcut
settings. For example, you can create or change the name
of the shortcut.
To start the E-mail wizard:
1. In the home screen, scroll to the E-mail wizard.
A transfer log is shown after every transfer. To view the
log of the last transfer, select a shortcut in the main view
and Options > View log.
2. Enter your e-mail address and password. If the wizard
is not able to configure your e-mail settings
automatically, select your e-mail account type, and
enter the related settings.
Handle transfer conflicts
If an item to be transferred has been edited in both
devices, the device attempts to merge the changes
automatically. If this is not possible, there is a transfer
conflict. Select Check one by one, Priority to this
phone, or Priority to other phone to solve the conflict.
Tip: If you have not configured your mailbox, press
the e-mail key to start the E-mail wizard.
If your device contains
additional e-mail
clients, those are
offered to you when
you start the E-mail
wizard.
Set up your e-mail
Your Nokia Eseries device works the same hours as you,
and at the same speed. Keep your e-mail, contacts, and
calendar synchronised - quickly and conveniently with
high speed connections.
When setting up your e-mail, you may be prompted for the
following information: user name, e-mail type, incoming
mail server, incoming mail server port, outgoing mail
server, outgoing mail server port, password, or access
point.
Antennas
Your device may have internal and external antennas. As
with any radio transmitting device, avoid touching the
antenna area unnecessarily while the antenna is
With the E-mail wizard, you can set up business e-mail
transmitting or receiving. Contact with such an antenna
affects the communication quality and may cause the
22 accounts, such as Microsoft Exchange, or internet e-mail
device to operate at a higher power level than otherwise
needed and may reduce the battery life.
Nokia PC Suite does not work with Macintosh.
For further information on Nokia PC Suite, see its help
function or the Nokia website.
To install Nokia PC Suite:
1. Ensure the memory card is inserted in your Nokia E75.
2. Connect the USB cable. Your PC recognises the new
device and installs the necessary drivers. This can take
several minutes to complete.
3. Select Mass storage as the USB connection mode in
your device. Your device is displayed in Windows file
browser as a Removable Disk.
Nokia PC Suite
4. Open the root of the memory card drive with the
Windows file browser, and select the PC Suite
installation.
Nokia PC Suite is a set of applications that you can install
to a compatible PC. Nokia PC Suite groups all available
applications in a launcher window from which you can run
the applications. You can install Nokia PC Suite from the
memory card in your device.
5. The installation is started. Follow the displayed
instructions.
Tip: To update your Nokia PC Suite, or if you have
problems when installing Nokia PC Suite from the
memory card, copy the installation file to your PC,
and start the installation from your PC.
You can use Nokia PC Suite to synchronise contacts,
calendar, and to-do and other notes between your device
and a compatible PC application, such as Microsoft Outlook
or Lotus Notes. You can also use Nokia PC Suite to
bookmark between your device and compatible browsers,
and transfer images and video clips between your device
and compatible PCs.
Tips for efficient use
To switch profiles, press the power key briefly.
Note: Pay attention to synchronisation settings.
Data deletion as part of normal synchronisation process is
determined by the settings selected.
To switch to the Silent profile, press and hold #.
To search for items in your device or on the internet
(network service), select Menu > Applications >
Search.
To use Nokia PC Suite, you need a PC that runs Microsoft
Windows XP (SP1 or SP2) or Windows Vista, and is
compatible with a USB data cable or with Bluetooth
connectivity.
23
When browsing web pages with the Web browser
application or maps in the Maps application, press * to
zoom in and # to zoom out.
Messaging, to see what instructions (help topics) are
available.
To switch between the application and help, press and
hold the home key.
Support
If you have issues with your device or you are unsure how
your device should function, see the support pages on your
local Nokia website at www.nokia.com, the Help
application in the device, or the user guide. If this does not
resolve your issue, try the following:
•
•
•
Reset the device: switch off the device and remove the
battery. After a few seconds, replace the battery, and
switch on the device.
Update your device software with Nokia Software
Updater. See www.nokia.com/softwareupdate or your
local Nokia website.
the reset.
options. See www.nokia.com/repair. Before sending your
device for repair, always back up or make a record of data
in your device.
Instructions in your device
To read instructions for the current view of the open
application, select Options > Help.
To browse the help topics and conduct searches, select
Menu > Help > Help. You can select categories for which
you want to see instructions. Select a category, such as
24
Nokia E75 - The basics
Select from the following:
Welcome
•
Operator — Define the operator-specific settings, such
as MMS, internet, WAP, and streaming settings.
E-mail setup — Create a new mailbox.
When you switch on your device for the first time, the
Welcome application is displayed.
•
•
•
Push to talk — Configure push to talk settings.
Video sharing — Configure video sharing settings.
To access the Welcome application later, select Menu >
Help > Welcome.
The settings available for editing may vary.
Select from the following:
•
•
•
Settings wizard — Configure various settings of your
device.
Menu
Phone switch — Transfer content, such as contacts
and calendar entries, from a compatible Nokia device.
E-mail setup — Configure e-mail settings.
Select Menu.
The menu is a starting
point from which you
can open all
applications in the
device or on a memory
card.
Settings wizard
Select Menu > Control panel > Sett. wizard.
Use Settings wizard to define e-mail and connection
settings. The availability of the items in Settings wizard
depends on the features of the device, SIM card, network
operator, and the data in the Settings wizard database.
The menu contains
applications and
folders, which are
groups of similar
applications. All
To start Settings wizard, select Start.
applications you install in the device yourself are by
default saved in the Applications folder.
To get the best results when using the settings wizard,
keep your SIM card inserted in the device. If the SIM card
is not inserted, follow the instructions on the display.
25
To open an application, select the application, that is,
scroll to it, and press the scroll key.
You have one or more unread messages in the
Inbox folder in Messaging.
To switch between the open applications, press and hold
the home key, and select an application. Leaving
You have received new e-mail in the remote
mailbox.
applications running in the background increases the
demand on battery power and reduces the battery life.
Select Options and from the following:
There are messages waiting to be sent in the
Outbox folder in Messaging.
•
Change Menu view — View applications in a list or a
grid.
You have one or more missed phone calls.
The keys of the device are locked.
An alarm is active.
•
Memory details — View the memory consumption of
different applications and data stored on the device or
memory card and to check the amount of free memory.
New folder — Create a new folder.
•
•
•
Rename — Rename a new folder.
Move — Rearrange the folder. Scroll to the application
you want to move, and select Move. A check mark is
placed beside the application. Scroll to a new location,
and select OK.
You have activated the Silent profile, and the
device does not ring for an incoming call or
message.
•
•
Move to folder — Move an application to a different
folder. Scroll to the application you want to move, and
select Move to folder, the new folder, and OK.
Download applications — Download applications
from the web.
Bluetooth connectivity is activated.
A Bluetooth connection is established. When the
indicator is blinking, your device is trying to
connect with another device.
Display indicators
A GPRS packet data connection is available
The device is being used in a UMTS network
(network service).
(network service). If the icon is , the connection
is active. If the icon is , the connection is on hold.
The battery charge level. The higher the bar, the
stronger the charge in the battery.
26
An EGPRS packet data connection is available
(network service). If the icon is , the connection
is active. If the icon is , the connection is on hold.
A headset is connected to the device.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
Your device is synchronising.
A UMTS packet data connection is available
(network service). If the icon is , the connection
is active. If the icon is , the connection is on hold.
High-speed downlink packet access (HSDPA) is
supported and available (network service). The
icon may vary between regions. If the icon is
the connection is active. If the icon is , the
connection is on hold.
,
You have an ongoing push-to-talk connection.
Your push-to-talk connection is in the do not
disturb mode, because the ringing type of your
device is set to Beep once or Silent, or you have
an incoming or ongoing phone call. In this mode,
you cannot make PTT calls.
You have set the device to scan for wireless LANs
(WLAN), and a WLAN is available.
A WLAN connection is active in a network that
does not have encryption.
Write text
A WLAN connection is active in a network that has
encryption.
The input methods provided in the device may vary
according to different sales markets.
Your device is connected to a computer with a USB
data cable.
Write text with the keyboard
The second phone line is being used (network
service).
Your device has a full keyboard.
To insert punctuation marks, press the corresponding key
or a combination of keys.
All calls are forwarded to another number. If you
have two phone lines, a number indicates the
active line.
27
To switch between the different character cases, press the
Shift key.
To insert digits or characters printed at the top of keys,
press and hold the corresponding key, or press and hold
the function key and press the corresponding key.
To define the settings for text input, select Options >
Input options > Settings.
To change the writing language, select Options > Input
To erase a character, press the backspace key. To erase
options > Writing language.
several characters, press and hold the backspace key.
To insert characters and symbols that are not shown on
the keyboard, press the Chr key.
To copy text, press and hold the Shift key, and scroll to
highlight the word, phrase, or line of text you want to
copy. Press Ctrl + C. To insert the text into a document,
move to the correct place, and press Ctrl + V.
To change the writing language, or to activate predictive
text input, select Options > Input options and from the
available options.
Search
Search
Select Menu > Applications > Search.
Search enables you to use various internet-based search
services to find and connect to, for example, local services,
websites, and images. The content and availability of the
services may vary.
Predictive text input
Start a search
To activate predictive text input, select Options > Input
Select Menu > Applications > Search.
To search for images on the internet, select Images.
options > Activate prediction. The indicator
is
displayed. When you start writing a word, your device
To search for businesses, restaurants, and events in the
suggests possible words. When the correct word is found,
scroll right to confirm it. While writing, you can also scroll
down to access a list of suggested words. If the desired
word is on the list, select the word. If the word you are
writing is not in the dictionary of the device, the device
suggests a possible word, while the word you were
writing is shown above the suggested word. Scroll up to
select your word. The word is added to the dictionary
when you start writing the next word.
selected country or region, select Local.
To search for websites, select Web.
Search results
Select Menu > Applications > Search.
To view the details of a search result, select Options >
Details, if available.
To deactivate predictive text input, select Options >
Input options > Deactivate prediction.
Select Options and from the following:
28
•
Show on map — View the found location on the map.
•
Navigate to — Check how to navigate to the found
location.
Common actions in
•
•
•
•
•
Open image — Open the found image in Gallery.
Save to gallery — Save the found image to Gallery.
Browse — View the found image in the web browser.
Next result — View the next search result.
Previous result — View the previous search result.
several applications
You can find the following actions in several applications:
To change the profile, or switch off or lock the device, press
the power key briefly.
The available options may vary.
If an application
consists of several tabs
(see figure), open a tab
by scrolling right or left.
Search services
To see what types of search services are available from a
search provider, select the search provider from the list.
To save the settings
that you have
configured in an
application, select
Back.
To select a search provider to use in a selected category as
a default, select Images, Local, or Web, and select
Options > Select service.
Some of the search providers are global, some are
available only in some countries or regions. To change
your country or region settings to find local search
providers, select Options > Country or region.
To save a file, select
Options > Save. There are different saving options
depending on the application you use.
To send a file, select Options > Send. You can send a file
in an e-mail or multimedia message, or using different
connectivity methods.
Search settings
Select Menu > Applications > Search.
To copy, press and hold the shift key, and select the text
with the scroll key. Press and hold the shift key, and select
Copy. To paste, scroll to where you want to paste the text,
press and hold the shift key, and select Paste. This method
may not work in applications that have their own copy and
paste commands.
To configure the settings for the Search application, select
Options > Settings and from the following:
•
Connection — Select the access point to use, and allow
or deny network connection.
•
•
Search services — Select the search providers to use.
General — Enable or disable tooltips.
To select different items, such as messages, files, or
contacts, scroll to the item you want to select. Select
29
Options > Mark/Unmark > Mark to select one item or
•
•
Applications shown in Application manager that you do
not need
Options > Mark/Unmark > Mark all to select all items.
Tip:To select almost all items, first select Options >
Mark/Unmark > Mark all, then select the items
you do not want, and Options > Mark/Unmark >
Unmark.
Installation files (with .sis or .sisx file extensions) of
installed applications. Back up the installation files to a
compatible computer.
•
Images and video clips in Gallery. Back up the files to a
compatible computer using Nokia PC Suite.
To select an object (for example, an attachment in a
document) scroll to the object so that square markers
appear on each side of the object.
Volume control
To adjust the earpiece volume during a phone call or the
volume of the media applications, use the volume keys.
Free memory
To view how much memory is available for different data
types, select Menu > Office > File mgr..
Many features of the device use memory to store data. The
device notifies you if available memory is low.
To free memory, transfer data to an alternative memory
(if available) or compatible computer.
To remove data you no longer need, use File manager or
the respective application. You can remove the following:
•
Messages in the folders in Messaging and retrieved e-
mail messages from the mailbox
•
•
•
Saved web pages
Contact information
Calendar notes
30
Personalisation
You can personalise your device by, for example, adjusting applicable safety requirements when establishing and
the various tones, background images, and screen savers. using these features.
To set the profile to be active until a certain time within
the next 24 hours, scroll to the profile, select Options >
Profiles
Timed, and set the time. When the time expires, the
profile changes back to the previously active non-timed
Select Menu > Control panel > Profiles.
profile. When the profile is timed,
is displayed in the
You can adjust and customise the ringing tones, alert
tones, and other device tones for different events,
environments, or caller groups. The active profile is shown
at the top of the display in the home screen. However, if
the active profile is General, only today's date is shown.
home screen. The Offline profile cannot be timed.
To delete a profile that you created, select Options >
Delete profile. You cannot delete the predefined profiles.
To create a new profile, select Options > Create new,
Select ringing tones
and define the settings.
To set a ringing tone for a profile, select Options >
Personalise > Ringing tone. Select a ringing tone from
the list, or select Download sounds to open a bookmark
folder containing a list of bookmarks for downloading
tones using the browser. Any downloaded tones are saved
to Gallery.
To customise a profile, select a profile and Options >
Personalise.
To change a profile, select a profile and Options >
Activate. The Offline profile prevents your device from
accidentally switching on, sending or receiving messages,
or using wireless LAN, Bluetooth connectivity, GPS, or FM
radio; it also closes any internet connection that may be
in operation when the profile is selected. The Offline
profile does not prevent you from establishing a wireless
LAN or Bluetooth connection at a later time, or from
restarting the GPS or FM radio, so comply with any
To play the ringing tone for a selected contact group only,
select Options > Personalise > Alert for, and select the
desired group. Phone calls coming from outside that
group have a silent alert.
To change the message tone, select Options >
31
Personalise > Message alert tone.
•
•
Warning tones — Turn the warning tones on or off.
This setting also affects the tones of some games and
Java™ applications.
Customise profiles
Select Menu > Control panel > Profiles. Scroll to a
profile, selectOptions > Personalise and from the
following:
Alert for — Set the device to ring only upon calls from
phone numbers that belong to a selected contact
group. Phone calls coming from outside that group
have a silent alert.
•
Ringing tone — Select a ringing tone from the list, or
select Download sounds to open a bookmark folder
containing a list of bookmarks for downloading tones
using the browser. If you have two alternate phone
lines in use, you can specify a ringing tone for each line.
Video call tone — Select a ringing tone for video calls.
Say caller's name — When you select this option and
someone from your contacts list calls you, the device
sounds a ringing tone that is a combination of the
spoken name of the contact and the selected ringing
tone.
•
Profile name — Give a name to a new profile, or
rename an existing profile. The General and Offline
profiles cannot be renamed.
•
•
Personalise the home
screen
Select Menu > Control panel > Modes.
•
•
•
•
•
•
•
•
•
Ringing type — Select how you want the ringing tone
to alert you.
To change the name of the current home screen, select
Options > Rename mode.
Ringing volume — Set the volume level of the ringing
tone.
To select which applications and notifications you want to
see in the home screen, select Home screen
applications.
Message alert tone — Select a tone for received text
messages.
E-mail alert tone — Select a tone for received e-mail
messages.
To change the theme of the home screen currently in use,
select General theme.
Vibrating alert — Set the device to vibrate when you
receive a call.
To change the background image of the home screen
Breathing light — Set the scroll key to blink slowly
when the display turns off.
currently in use, select Wallpaper.
To change from one home screen to another, scroll to
Opening sound — Select a tone that sounds when you
open the slide.
Current mode, and select Options > Change.
Closing sound — Select a tone that sounds when you
close the slide.
32
Keypad tones — Set the volume level of the keypad
tones.
Change the display
Change audio themes
Select Menu > Control panel > Themes and Audio
theme
theme.
Select Menu > Control panel > Themes.
You can set sounds for various device events. The sounds
can be tones, speech, or a combination of both.
To change the theme used in all applications, select
General.
To change the current audio theme, select Active audio
theme.
To change the theme used in the main menu, select Menu
view.
To set a sound for an event, select an event group, such as
ringing tones, and the desired event.
To change the theme for a particular application, select
the application-specific folder.
To use all the preset sounds in an event group, scroll to the
group, and select Options > Activate sounds.
To change the background image of the home screen,
Select Options and from the following:
select Wallpaper.
•
•
•
Play voice — Play the sound before activating it.
Save theme — Create a new audio theme.
3-D ringing tones — Add 3-D effects to the audio
theme.
To select an animation for the screen saver, select Power
saver.
To turn theme effects on or off, select General >
Options > Theme effects.
•
Speech — Select Speech to set speech as the sound
for an event. Enter the desired text to the text field. The
Speech option is not available if you have activated the
Say caller's name option in the current profile.
Deactivate sounds — Silence all the sounds in an
event group.
Download a theme
•
To download a theme, select General or Menu view >
Download themes. Enter the link from which you want
to download your theme. Once the theme is downloaded,
you can preview, activate, or edit it.
3-D ringing tones
To preview a theme, select Options > Preview.
To start using the selected theme, select Options > Set.
Select Menu > Control panel > 3-D tones.
To enable three-dimensional (3-D) sound effects for
ringing tones, select 3-D ringing tone effects > On. Not
all ringing tones support 3–D effects.
33
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect.
To modify the 3–D effect, select from the following:
•
Trajectory speed — Select the speed at which sound
moves from one direction to another. This setting is not
available for all effects.
•
•
Reverberation — Select the desired effect to adjust
the amount of echo.
Doppler effect — Select On to set the ringing tone
sound higher when you are closer to your device, and
lower when you are farther away. This setting is not
available for all effects.
To listen to the ringing tone with the 3–D effect, select
Options > Play tone.
To adjust the volume of the ringing tone, select Menu >
Control panel > Profiles and Options > Personalise >
Ringing volume.
34
New from Nokia Eseries
Your new Nokia Eseries device contains new versions of
the Calendar, Contacts, and E-mail applications, as well as
a new home screen.
Work with documents, spreadsheets, and
presentations with the Quickoffice application.
Add new business applications to your Nokia
E75 with the Download! application.
Key features
Find points of interest with the Maps
application.
Your new Nokia E75 helps you manage your business and
personal information. Some of the key features are
highlighted here:
Switch from business to personal mode.
Read and reply to your e-mail while on the
move.
Edit the appearance and setup of your home
screen with the Modes application.
Stay up-to-date and plan your meetings with
the Calendar application.
Browse your company intranet with the
Intranet application.
Manage your business partners and free time
friends with the Contacts application.
Move your contact and calendar information
from a previous device to your Nokia E75 with
the Switch application.
Make calls using voice over IP services with the
Internet call application.
Check the available updates for applications
and download them to your device with the
Application update application.
Connect to a wireless LAN (WLAN) with the
WLAN wizard application.
35
You can define two separate home screens for different
purposes, for example, one screen to show your business
e-mail and notifications, and another to show your
personal e-mail. This way, you do not have to see business-
related messages outside office hours.
Encrypt your device or memory card to prevent
outsiders from accessing your important
information.
To switch between the home screens, select
.
Home screen
To define which items and shortcuts you want in the home
screen, and to set the appearance of the home screen,
select Menu > Control panel and Modes.
In the home screen, you can quickly access your most
frequently used features and applications, and view at a
glance if you have missed calls or new messages.
Work on the home screen
Home screen
To search for contacts in the home screen, start entering
the contact's name. The device suggests matching
contacts. Scroll to the desired contact. This feature may
not be available in all languages.
In the home screen, you can quickly access your most
frequently used applications, and view at a glance if you
have missed calls or new messages.
Whenever you see the
icon, scroll right to access a list
To call the contact, press the call key.
of available actions. To close the list, scroll left.
To set off the contact search, select Options > Contact
The home screen
consists of the
following:
search off.
To check your received messages, scroll to the message
box in the notification area. To read a message, scroll to it
and press the scroll key. To access other tasks, scroll right.
1. Application
shortcuts. To access
an application,
To view your missed calls, scroll to the calls box in the
notification area. To return a call, scroll to a call and press
the call key. To send a text message to a caller, scroll to a
call, scroll right and select Send text msg. from the list of
available actions.
select the shortcut
of the application.
2. Information area.
To check an item
To listen to your voice mail, scroll to the voice mail box in
the notification area. Scroll to the desired voice mailbox
and press the call key to call it.
displayed in the information area, select the item.
3. Notification area. To view the notifications, scroll to a
box. A box is only visible if there are items in it.
36
Calendar key
One-touch keys
To open the Calendar application, press the calendar key
briefly.
With the One-touch keys, you can access applications and
tasks quickly. Each key has been assigned an application
or a task. To change these, select Menu > Control
panel > Settings and General > Personalisation >
One-touch keys. Your service provider may have assigned
applications to the keys, in which case you cannot change
them.
To create a new meeting entry, press the calendar key for
a few seconds.
E-mail key
To open your default mailbox, press the e-mail key briefly.
To create a new e-mail message, press the e-mail key for
a few seconds.
1 — Home key
2 — Calendar key
3 — E-mail key
Turn and tap to silence
calls or alarms
When you activate the sensors in your device, you can
control certain functions by turning or tapping the device.
Home key
Select Menu > Control panel > Settings and General >
To access the home screen, press the home key briefly.
Press the home key briefly again to access the menu.
Sensor settings.
Select from the following:
To view the list of active applications, press the home key
for a few seconds. When the list is open, press the home
key briefly to scroll the list. To open the selected
application, press the home key for a few seconds, or press
the scroll key. To close the selected application, press the
backspace key.
•
•
•
Display rotation — Set the display to rotate
automatically according to the device's orientation.
Tapping control — Set the device to silence incoming
calls or snooze alarms when you tap the device twice.
Turning control — Set the device to silence incoming
calls or snooze alarms when you turn the device face
down.
Leaving applications running in the background increases
the demand on battery power and reduces the battery life.
37
•
•
Memo entries are related to the whole day but not to a
specific time of the day.
Calendar
Anniversary entries remind you of birthdays and special
dates. They refer to a certain day but not a specific time
of the day. Anniversary entries are repeated every year.
Select Menu > Calendar.
About Calendar
•
To-do entries remind you of a task that has a due date
but not a specific time of the day.
Select Menu > Calendar.
To create a calendar entry, select a date, Options > New
With calendar, you can create and view scheduled events
and appointments, and switch between different calendar
views.
entry, and the entry type.
To set the priority for meeting entries, select Options >
Priority.
In the month view, calendar entries are marked with a
triangle. Anniversary entries are also marked with an
exclamation mark. The entries of the selected day are
displayed as a list.
To define how the entry is handled during
synchronisation, select Private to hide the entry from
viewers if the calendar is available online, Public to make
the entry visible to viewers, or None to not copy the entry
to your computer.
To open calendar entries, select a calendar view and an
entry.
To send the entry to a compatible device, select Options >
Whenever you see the
icon, scroll right to access a list
Send.
of available actions. To close the list, scroll left.
To make a meeting request of a meeting entry, select
Options > Add optional participant.
Create calendar entries
Select Menu > Calendar.
Create meeting requests
You can create the following types of calendar entries:
Select Menu > Calendar.
•
•
Meeting entries remind you of events that have a
Before you can create meeting requests, you must have a
specific date and time.
compatible mailbox configured for your device.
Meeting requests are invitations that you can send to
the participants. Before you can create meeting
requests you must have a compatible mailbox
configured to your device.
To create a meeting entry:
1. To create a meeting entry, select a day and Options >
New entry > Meeting request.
38
2. Enter the names of the required participants. To add
names from your contacts list, enter the first few
characters, and select from the proposed matches. To
add optional participants, select Options > Add
optional participant.
•
Agenda view shows the events for the selected day in
a list.
Tip: To switch between views, press *.
To change the view, select Options > Change view and
3. Enter the subject.
the desired view.
4. Enter the start and end times and dates, or select All-
Tip: To open the week view, select the week
day event.
number.
5. Enter the location.
To move to the next or the previous day in month, week,
6. Set an alarm for the entry, if needed.
day, and agenda view, select the desired day.
7. For a recurring meeting, set the recurrence time, and
enter the end date.
To change the default view, select Options > Settings >
Default view.
8. Enter a description.
To set the priority for the meeting request, select
Options > Priority.
Contacts
To send the meeting request, select Options > Send.
Select Menu > Contacts.
Calendar views
About Contacts
Select Menu > Calendar.
Select Menu > Contacts.
You can switch between the following views:
With Contacts, you can save and update contact
•
•
•
•
Month view shows the current month and the calendar
information, such as phone numbers, home addresses,
and e-mail addresses of your contacts. You can add a
personal ringing tone or a thumbnail image to a contact.
You can also create contact groups, which allow you to
communicate with several contacts at the same time, and
send contact information to compatible devices.
entries of the selected day in a list.
Week view shows the events for the selected week in
seven day boxes.
Day view shows the events for the selected day grouped
into time slots according to their starting time.
To-do view shows all to-do items.
Whenever you see the
icon, scroll right to access a list
39
of available actions. To close the list, scroll left.
Work with contacts
Search for contacts in a remote
database
Select Menu > Contacts.
To create a contact, select Options > New contact, and
To activate remote contact search, select Options >
Settings > Contacts > Search from remote. To search
for contacts in a remote database, select Contacts >
Options > Search from remote. Enter the name of the
contact you want to search for, and select Search. The
device establishes a data connection to the remote
database.
enter the details of the contact.
To copy the details of a contact from the memory card, if
available, select Options > Copy > From memory
card.
To search for contacts, start entering the contact's name
in the search field.
To search for contacts in the home screen, start entering
letters or digits in the home screen, and select the
database from the proposed matches.
To change the remote contacts database, select Options >
Settings > Contacts > Remote search server. This
setting affects the database used in the Contacts and
Calendar applications and the home screen, but not the
database that is used for e-mail.
Create contact groups
Select Menu > Contacts.
1. To create a contact group, scroll to each contact you
want to add to the group, and select Options > Mark/
Unmark > Mark.
2. Select Options > Group > Add to group > Create
new group, and enter a name for the group.
Add ringing tones for contacts
If you want to make conference calls to the group using a
conference service, define the following:
Select Menu > Contacts.
•
Conf. service number — Enter the conference call
service number.
To add a ringing tone for a contact, select the contact,
Options > Ringing tone, and a ringing tone. The ringing
tone sounds when the contact calls you.
•
•
Conf. service ID — Enter the conference call ID.
Conf. service PIN — Enter the conference call PIN code.
To add a ringing tone for a contact group, select the
contact group, Options > Group > Ringing tone, and a
ringing tone.
To make a conference call to the group using the
conference service, select the group, scroll right, and select
Call conf. service.
To remove the ringing tone, select Default tone from the
list of ringing tones.
40
Select a bookmark or enter the web address
manually, and select Go to. To return to your
message, press and hold the home key, scroll to the
message and press the scroll key.
Change Contacts settings
Select Menu > Contacts.
To change the settings of the Contacts application, select
Options > Settings and from the following:
•
•
•
•
•
Contacts to display — Select the memories from
Open Ovi with Nokia
where contacts are displayed.
to save contacts.
E75
Name display — Change the way the contacts' names
are displayed.
Ovi is your door to different Nokia services.
For a tour and more information, browse to
www.ovi.com with your computer.
Default contact list — Select which contacts directory
opens when you open the Contacts application.
Remote search server — Change the remote contacts
database. This option is available only if remote
contacts database is supported by your service
provider.
Files on Ovi
With Files on Ovi, you can use your Nokia E75 to access
content on your computer if it is switched on and
connected to the internet. You will need to install the Files
on Ovi application to every computer you want to access
with Files on Ovi.
Multitasking
You can have several applications open at the same time.
To switch between active applications, press and hold the
home key, scroll to an application, and press the scroll key.
To close the selected application, press the backspace key.
Using Files on Ovi, you can:
•
Browse, search, and view your images. You do not need
to upload the images to the website but you can access
your computer content with your mobile device.
Example: When you have an active phone call and
want to check your calendar, press the home key to
access the menu, and open the Calendar
application. The phone call remains active in the
background.
•
•
Browse, search, and view your files and documents. You
do not need any special applications on your device.
Download songs from your computer to your device.
Later, you can use the music player on your device to
listen to the songs as you normally would.
Example: When you are writing a message and
want to check a web site, press the home key to
access the menu, and open the Web application.
41
•
Send files and folders from your computer without
moving them to and from your device first.
•
Access files on your computer even when your
computer is switched off. Just choose which folders and
files you want to be available, and Files on Ovi
automatically keeps an up-to-date copy stored in a
protected, online storage for access even when your
computer is switched off.
To install Files on Ovi:
1. Select Menu > Office and Files on Ovi.
2. Read the information on the display, and select
Continue.
3. Scroll down to the Email field, and press the scroll key
to activate it.
4. Enter your e-mail address, and select Done.
5. Select Send. The Files on Ovi service sends you an e-
mail with information to get you started.
42
Messaging
Select Menu > Messaging.
Messaging folders
In Messaging (network service), you can send and receive
text messages, multimedia messages, audio messages,
and e-mail messages. You can also receive web service
messages, cell broadcast messages, and special messages
containing data, and send service commands.
Select Menu > Messaging.
Messages and data received using Bluetooth connectivity
are stored in the Inbox folder. E-mail messages are stored
in the Mailbox folder. Messages that you have been writing
can be stored in the Drafts folder. Messages that are
waiting to be sent are stored in the Outbox folder, and
messages that have been sent, excluding Bluetooth
messages, are stored in the Sent folder.
Before sending or receiving messages, you may need to
do the following:
•
•
Insert a valid SIM card in the device and be located in
the service area of a cellular network.
Tip: Messages are placed in the Outbox folder, for
example, when your device is outside network
coverage. You can also schedule e-mail messages to
be sent the next time you connect to your remote
mailbox.
Verify that the network supports the messaging
features you want to use and that they are activated on
your SIM card.
•
•
•
•
Define the internet access point settings on the device.
Define the e-mail account settings on the device.
Define the text message settings on the device.
Define the multimedia message settings on the device.
Note: The message sent icon or text on your device
screen does not indicate that the message is received at
the intended destination.
To request the network to send you a delivery report of
the text messages and multimedia messages you have
sent (network service), select Options > Settings > Text
message > Receive report or Multimedia message >
Receive reports. The reports are saved in the Reports
folder.
The device may recognise the SIM card provider and
automatically configure some of the message settings. If
not, you may need to define the settings manually; or
contact your service provider to configure the settings.
43
automatically, you need to select your e-mail account
type and enter the related account settings.
Organise messages
If your device contains any additional e-mail clients, those
Select Menu > Messaging and My folders.
are offered to you when you start the e-mail wizard.
To create a new folder to organise your messages, select
Options > New folder.
Send e-mail
To rename a folder, select Options > Rename folder. You
can only rename folders that you have created.
Select Menu > Messaging.
To move a message to another folder, select the message,
1. Select your mailbox and Options > Create e-mail.
Options > Move to folder, the folder, and OK.
2. In the To field, enter the recipient's e-mail address. If
the recipient's e-mail address can be found in Contacts,
start entering the recipient's name, and select the
recipient from the proposed matches. If you add
several recipients, insert ; to separate the e-mail
addresses. Use the Cc field to send a copy to other
recipients, or the Bcc field to send a blind copy to
recipients. If the Bcc field is not visible, select
Options > More > Show Bcc field.
To sort messages in a specific order, select Options > Sort
by.
To view the properties of a message, select the message
and Options > Message details.
E-mail
3. In the Subject field, enter the subject of the e-mail.
4. Enter your message in the text area.
Set up your e-mail
With the Nokia e-mail wizard, you can set up your
corporate e-mail account, such as Microsoft Outlook, Mail
for Exchange, or Intellisync, and your internet e-mail
account.
5. Select Options and from the following:
•
Add attachment — Add an attachment to the
message.
•
•
•
•
Priority — Set the priority of the message.
Flag — Flag the message for follow-up.
Insert template — Insert text from a template.
Add recipient — Add recipients to the message
from Contacts.
When setting up your corporate e-mail, you may be
prompted for the name of the server associated with your
e-mail address. Ask your company IT department for
details.
1. To start the wizard, go to the home screen, scroll to the
•
•
Editing options — Cut, copy, or paste the selected
text.
e-mail wizard, and press the scroll key.
2. Enter your e-mail address and password. If the wizard
is not able to configure your e-mail settings
Writing language: — Select the writing language.
44
6. Select Options > Send.
message, a list opens showing which attachments have
been downloaded or not.
To download the selected attachment or all the
attachments from the list to your device, select Options >
Download or Download all. The attachments are not
saved in your device, and are deleted when you delete the
message.
Add attachments
Select Menu > Messaging.
To write an e-mail message, select your mailbox and
Options > Create e-mail.
To add an attachment to the e-mail message, select
Options > Add attachment.
To save the selected attachment or all the downloaded
attachments in your device, select Options > Save or
Save all.
To remove the selected attachment, select Options >
Remove attachment.
To open the selected, downloaded attachment, select
Read e-mail
Options > Actions > Open.
Select Menu > Messaging.
Reply to a meeting request
Important: Exercise caution when opening
messages. Messages may contain malicious software or
otherwise be harmful to your device or PC.
Select Menu > Messagingand a mailbox.
Select a received meeting request, Options, and from the
following:
To read a received e-mail message, select the mailbox, and
•
•
•
Accept — Accept the meeting request.
Decline — Decline the meeting request.
Forward — Forward the meeting request to another
recipient.
select the message from the list.
To reply to the message sender, select Options > Reply.
To reply to the sender and all other recipients, select
Options > Reply to all.
•
Remove from calendar — Remove a cancelled
meeting from your calendar.
To forward the message, select Options > Forward.
Search for e-mail messages
To search for items within the recipients, subjects, and
body texts of the e-mail messages in the mailbox, select
Options > Search.
Download attachments
To view the attachments in a received e-mail message,
scroll to the attachment field, and select Options >
Actions > Open. If there are several attachments in the
Select Menu > Messagingand a mailbox.
Select Menu > Messagingand a mailbox.
45
To stop the search, select Options > Stop search.
To start a new search, select Options > New search.
Set on an out-of-office reply
Select Menu > Messaging.
To set on an out-of-office reply, select your mailbox and,
depending on your mailbox type, either Options >
Settings > Mailbox settings > Out of office > On or
Options > Settings > Intellisync > Mailbox
settings > Out of office > On.
Delete e-mails
Select Menu > Messagingand a mailbox.
To delete the selected e-mail message, select Options >
Delete. The message is placed in the Deleted items folder,
if available.
To enter the text for the reply, select Out of office reply.
To empty the Deleted items folder, select the folder and
Options > Empty deleted items.
General e-mail settings
Select Menu > Messaging, mailbox, and Options >
Settings > Global settings and from the following:
Switch between e-mail folders
•
•
Message list layout — Select whether the e-mail
messages in Inbox display one or two lines of text.
Body text preview — Select whether to preview
messages when scrolling through the list of e-mail
messages in Inbox.
Select Menu > Messagingand a mailbox.
To open another e-mail folder or mailbox, select Inbox at
the top of the display. Select the e-mail folder or mailbox
from the list.
•
•
Title dividers — Select On to be able to expand and
collapse the list of e-mail messages.
Disconnect from the mailbox
Download notifications — Select whether to have
the device to display a notification when an e-mail
attachment has been downloaded.
Select Menu > Messagingand a mailbox.
To cancel the synchronisation between the device and the
e-mail server, and to work with e-mail without a wireless
connection, select Options > Disconnect. If your mailbox
does not have the Disconnect option, select Options >
Exit to disconnect from the mailbox.
•
Home screen — Define how many lines of e-mail are
shown in the home screen information area.
Message reader
To start the synchronisation again, select Options >
The message reader reads received text and multimedia
messages aloud.
Connect.
46
To play a message, press and hold the left selection key
when you receive a message.
Text and multimedia
To start reading the next message in Inbox, scroll down.
To start reading the message again, scroll up. In the
beginning of the message, scroll up to hear the previous
message.
messages
Select Menu > Messaging.
Only devices that have compatible features can receive
and display multimedia messages. The appearance of a
message may vary depending on the receiving device.
To pause the reading, press the left selection key briefly.
To continue, press the left selection key briefly again.
To end the reading, press the end key.
A multimedia message (MMS) can contain text and objects
such as images, sound clips, or video clips. Before you can
send or receive multimedia messages on your device, you
must define the multimedia message settings. Your device
may recognise the SIM card provider and configure the
correct multimedia message settings automatically. If not,
contact your service provider for the correctsettings, order
the settings from your service provider in a configuration
message, or use the Settings wizard application.
Speech
Select Menu > Control panel > Phone > Speech.
To set the language for the message reader, select
Language. To download additional languages to your
device, see the Nokia website or use the Download!
application.
To set the speaking voice, select Voice. The voice is
Write and send messages
language-dependent.
Select Menu > Messaging.
To set the speaking rate, select Voice settings > Speed.
To set the speaking volume, select Voice settings >
Important: Exercise caution when opening
messages. Messages may contain malicious software or
otherwise be harmful to your device or PC.
Volume.
To listen to a voice, open the voice tab, select the voice and
Options > Play voice.
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
place.
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit the device may
make it smaller so that it can be sent by MMS.
47
Check the size limit of e-mail messages with your service
provider. If you attempt to send an e-mail message that
exceeds the size limit of the e-mail server, the message is
left in the Outbox folder, and the device attempts to resend
it periodically. Sending an e-mail requires a data
7. To add an attachment to an e-mail, select Options and
the attachment type. E-mail attachments are indicated
by
.
8. To send the message, select Options > Send, or press
the call key.
connection, and continuous attempts to resend the e-mail
may increase your phone bill. In the Outbox folder, you can
delete such a message, or move it to the Drafts folder.
Note: The message sent icon or text on your device
screen does not indicate that the message is received at
the intended destination.
1. Select New message > Message to send a text or
multimedia message (MMS), Audio message to send
a multimedia message that includes one sound clip, or
E-mail to send an e-mail message.
Your device supports text messages beyond the limit for a
single message. Longer messages are sent as two or more
messages. Your service provider may charge accordingly.
Characters with accents or other marks, and characters
from some language options, take up more space, and
limit the number of characters that can be sent in a single
message.
2. In the To field, press the scroll key to select recipients
or groups from the contacts list, or enter the recipient’s
phone number or e-mail address. To add a semicolon
(;) that separates the recipients, press *. You can also
copy and paste the number or address from the
clipboard.
You may not be able to send video clips that are saved in
the MP4 file format or that exceed the size limit of the
wireless network in a multimedia message.
3. In the subject field, enter the subject of the e-mail. To
change the fields that are visible, select Options >
Message header fields.
4. In the message field, write the message. To insert a
template or note, select Options > Insert content >
Insert text > Template or Note.
Text messages on the SIM card
Select Menu > Messaging and Options > SIM
messages.
5. To add a media file to a multimedia message, select
Options > Insert content, the file type or source, and
the desired file. To insert a business card, slide, note,
or some other file to the message, select Options >
Insert content > Insert other.
Text messages may be stored on your SIM card. Before you
can view SIM messages, you must copy the messages to a
folder in the device. After copying the messages to a folder,
you can view them in the folder or delete them from the
SIM card.
6. To capture an image or record a video or sound clip for
a multimedia message, select Options > Insert
content > Insert image > New, Insert video
clip > New, or Insert sound clip > New.
1. Select Options > Mark/Unmark > Mark or Mark
all to mark every message.
48
2. Select Options > Copy.
3. Select a folder and OK to begin copying.
Create presentations
To view SIM card messages, open the folder where you
Select Menu > Messaging.
copied the messages, and open a message.
Creating multimedia presentations is not possible if MMS
creation mode is set to Restricted. To change the setting,
select Options > Settings > Multimedia message >
MMS creation mode > Free.
Receive and reply to
multimedia messages
Important: Exercise caution when opening
messages. Messages may contain malicious software or
otherwise be harmful to your device or PC.
1. To create a presentation, select New message >
Message. The message type is changed to multimedia
message based on the inserted content.
2. In the To field, enter a recipient's number or e-mail
address, or press the scroll key to add a recipient from
the contacts list. If you enter more than one number or
e-mail address, separate them with a semicolon.
Tip: If you receive multimedia messages that
contain objects unsupported by your device, you
cannot open them. Try to send these objects to
another device such as a computer, and open them
there.
3. Select Options > Insert content > Insert
presentation and a presentation template. A
template may define which media objects you can
include in the presentation, where they appear, and
which effects are displayed between images and
slides.
1. To reply to a multimedia message, open the message,
and select Options > Reply.
2. Select Options and To sender to reply to the sender
with a multimedia message, Via text message to
reply with a text message, Via audio message to reply
with an audio message, or Via e-mail to reply with an
e-mail message.
4. Scroll to the text area, and enter the text.
5. To insert images, sound or video clips, or notes in your
presentation, scroll to the corresponding object area,
and select Options > Insert.
Tip: To add recipients to your reply, select
Options > Add recipient to select the
recipients of the message from Contacts, or
enter the recipients' phone numbers or e-mail
addresses manually in the To field.
6. To add slides, select Options > Insert > New slide.
To select the background colour for the presentation and
background images for different slides, select Options >
Background settings.
To set effects between images or slides, select Options >
3. Enter the text of the message, and select Options >
Effect settings.
Send.
49
To preview the presentation, select Options > Preview. To view the name and size of an attachment, select the
Multimedia presentations may only be viewed in
compatible devices that support presentations. They may
appear different in different devices.
message and Options > Objects.
To save a multimedia object, select Options > Objects,
the object, and Options > Save.
View presentations
Special message types
To view a presentation, open the multimedia message
from the Inbox folder. Scroll to the presentation, and press
the scroll key.
Select Menu > Messaging.
You can receive special messages that contain data, such
as operator logos, ringing tones, bookmarks, or internet
access or e-mail account settings.
To pause the presentation, press either selection key.
To resume playing the presentation, select Options >
To save the contents of these messages, select Options >
Continue.
Save.
If the text or images are too large to fit on the display,
select Options > Activate scrolling, and scroll to see the
entire presentation.
Service messages
To find phone numbers and e-mail or web addresses in the
presentation, select Options > Find. You may use these
numbers and addresses to make calls, send messages, or
create bookmarks, for example.
Service messages are sent to your device by service
providers. Service messages may contain notifications
such as news headlines, services, or links through which
the message content can be downloaded.
To define the service message settings, select Options >
Settings > Service message.
View and save multimedia
attachments
To download the service or message content, select
Options > Download message.
To view multimedia messages as complete presentations,
open the message, and select Options > Play
presentation.
To view information about the sender, web address,
expiration date, and other details of the message before
downloading it, select Options > Message details.
Tip: To view or play a multimedia object in a
multimedia message, select View image, Play
sound clip, or Play video clip.
50
Tip: You can set important topics as hot topics. You
are notified in the home screen, when you receive
a message related to a hot topic. Select a topic and
Options > Hotmark.
Send service commands
You can send a service request message (also known as a
USSD command) to your service provider and request
activation for certain network services. Contact your
service provider for the service request text.
To add, edit, or delete topics, select Options > Topic.
To send a service request message, select Options >
Service commands. Enter the service request text and
select Options > Send.
Messaging settings
a red asterisk.
Your device may recognise the SIM card provider and
configure the correct text message, multimedia message,
and GPRS settings automatically. If not, contact your
service provider for the correct settings, order the settings
from your service provider in a configuration message, or
use the Settings wizard application.
Select Menu > Messaging and Options > Settings.
Complete all fields marked with Must be defined or with
Cell broadcast
Select Menu > Messaging and Options > Cell
broadcast.
With the cell broadcast network service, you can receive
messages on various topics from your service provider,
such as weather or traffic conditions in a particular region.
For available topics and relevant topic numbers, contact
your service provider. Cell broadcast messages cannot be
received when the device is in the remote SIM mode. A
packet data (GPRS) connection may prevent cell broadcast
reception.
Text message settings
Select Menu > Messaging and Options > Settings >
Text message.
Cell broadcast messages cannot be received in UMTS (3G)
Select from the following:
networks.
•
•
•
Message centres — View the available message
centres for your device, or add a new one.
Message centre in use — Select a message centre to
send the message.
To receive cell broadcast messages, you may need to turn
cell broadcast reception on. Select Options > Settings >
Reception > On.
To view messages related to a topic, select the topic.
Character encoding — Select Reduced support to
use automatic character conversion to another
encoding system when available.
To receive messages related to a topic, select Options >
Subscribe.
51
•
•
Receive report — Select Yes if you want the network
to send you delivery reports on your messages
(network service).
•
•
Access point in use — Select the default access point
to connect to the multimedia message centre. You may
not be able to change the default access point if it is
preset in your device by your service provider.
Multimedia retrieval — Select Always automatic to
receive multimedia messages always automatically,
Auto in home netw. to receive notification of a new
multimedia message that you can retrieve from the
message centre (for example, when you are travelling
abroad and are outside your home network), Manual
to retrieve multimedia messages from the message
centre manually, or Off to prevent receipt of any
multimedia messages.
Message validity — Select how long the message
centre resends your message if the first attempt fails
(network service). If the recipient cannot be reached
within the validity period, the message is deleted from
the message centre.
•
Message sent as — Convert the message to another
format, for example, fax or e-mail. Change this option
only if you are sure that your message centre is able to
convert text messages into these other formats. For
more information, contact your service provider.
Preferred connection — Select the preferred method
of connection when sending text messages from your
device.
•
•
•
•
•
Allow anonymous msgs. — Select whether you want
to receive messages from unknown senders.
Receive adverts — Select whether you want to receive
messages defined as advertisements.
Reply via same centre — Select whether you want
the reply message to be sent using the same text
message centre number (network service).
Receive reports — Select Yes to have the status of the
sent message to be shown in the log (network service).
Receiving a delivery report of a multimedia message
that has been sent to an e-mail address may not be
possible.
Multimedia message settings
•
•
Deny report sending — Select Yes to not send delivery
reports from your device for received multimedia
messages.
Select Menu > Messaging and Options > Settings >
Multimedia message.
Select from the following:
Message validity — Select how long the messaging
centre tries to send the message (network service). If
the recipient of a message cannot be reached within
the validity period, the message is removed from the
multimedia messaging centre. Maximum time is the
maximum amount of time allowed by the network.
•
•
Image size — Scale images in multimedia messages.
MMS creation mode — Select Restricted to set your
device to prevent you from including content in
multimediamessages thatmaynotbesupported by the
network or the receiving device. To receive warnings
about including such content, select Guided. To create
a multimedia message with no restrictions on
52
attachment type, select Free. If you select Restricted,
creating multimedia presentations is not possible.
ask if you want to confirm from where the e-mail
should be deleted every time you delete an e-mail.
Send message — Select to send the e-mail
immediately or when a connection is available.
Send copy to self — Select whether you want to save
a copy of the e-mail to your remote mailbox and to the
address defined in My e-mail address in the Outgoing
e-mail settings.
E-mail account settings
Select Menu > Messaging and Options > Settings >
•
•
E-mail.
If you try to edit mailbox settings but have not yet set up
an e-mail account, the E-mail wizard opens and helps you
set up your e-mail account.
If you have defined a mailbox, to edit the settings, select
•
•
Include signature — Select whether you want to
attach a signature to your e-mail messages.
New e-mail alerts — Select whether you want to be
notified of a new received e-mail message with a tone
and a note.
the mailbox.
The settings available for editing may vary. Some settings
may be preset by your service provider.
Connection settings
Retrieval settings
To define the connection settings, select an e-mail account
and Options > Edit > Connection settings. To edit the
settings for the e-mail you receive, select Incoming e-
mail. To edit the settings for the e-mail you send, select
Outgoing e-mail.
To define the retrieval settings, select the e-mail account,
select Options > Edit > Retrieval settings, and define
the following settings:
•
E-mail retrieval — Select whether you want to
retrieve only the e-mail header information such as
sender, subject and date, e-mail, or e-mail with
attachments. This setting is for POP3 mailboxes only.
Retrieval amount — Select the number of e-mail
messages you want to retrieve from the remote server
to your mailbox.
User settings
To define the user settings for an e-mail account, select
the account, select Options > Edit > User settings, and
define the following settings:
•
•
•
•
My name — Enter a name to appear before your e-mail
IMAP4 folder path — Define the folder path for folders
to be subscribed. This setting is for IMAP4 mailboxes
only.
address when you send e-mail.
•
Reply-to — Select whether you want replies to be
redirected to a different address. Select On, and enter
the e-mail address to which you want to direct the
replies. You can only enter one address to which replies
are directed.
Folder subscriptions — Subscribe to other folders in
the remote mailbox and retrieve content from those
folders. This setting is for IMAP4 mailboxes only.
•
Delete e-mails from — Select whether you want to
delete the e-mail messages only from the device or
from both the device and the server. Select Always
53
Automatic retrieval settings
Cell broadcast settings
To define the automatic retrieval settings for an e-mail
account, select the account, select Options > Edit >
Automatic retrieval, and define the following settings:
Select Menu > Messaging and Options > Settings >
Cell broadcast.
To receive cell broadcast messages, select Reception >
•
E-mail retrieval — Select Enabled to retrieve new e-
mail messages automatically from your remote
mailbox, or Only in home netw. to retrieve new e-mail
messages automatically from your remote mailbox
only when you are in your home network and not, for
example, travelling.
On.
To select the languages in which you want to receive cell
broadcast messages, select Language.
To display new topics in the cell broadcast topics list, select
Topic detection > On.
•
•
•
•
Retrieval days — Select the days on which e-mail is
retrieved to your device.
Retrieval hours — Define the hours between which
the e-mail is retrieved.
Other settings
Select Menu > Messaging and Options > Settings >
Retrieval interval — Select the interval between
retrieving new e-mail messages.
Other.
E-mail notifications — Select whether you want to
receive notifications on received e-mail.
Select from the following:
•
Save sent messages — Select whether to save sent
messages in the Sent folder.
•
Number of saved msgs. — Enter the number of sent
messages to save. When the limit is reached, the oldest
message is deleted.
Service message settings
Select Menu > Messaging and Options > Settings >
•
Memory in use — Select where to save your messages.
You can save messages to the memory card only if a
memory card is inserted.
Service message.
To allow your device toreceive service messagesfromyour
service provider, select Service messages > On.
To select how to download services and service message
content, select Download messages > Automatically
or Manually. If you select Automatically, you may still
need to confirm some downloads since not all services can
be downloaded automatically.
Instant messaging
About Instant messaging
Instant messaging (IM) (network service) allows you to
54
converse with other people using instant messages and
join discussion forums (IM groups) with specific topics.
Various service providers maintain compatible IM servers
that you can log in to after you register to an IM service.
Service providers may differ in their support of features.
Connect to an IM server
1. To connect to the instant messaging (IM) server in use,
open IM, and select Options > Log in.
2. Enter your user ID and password, and press the scroll
key to log in. You obtain the user ID and password for
the IM server from your service provider.
Before you can use Instant messaging, you must save the
settings to access the service that you want to use. The
settings may be preconfigured in your device, or you may
receive the settings as a configuration message from the
service provider that offers the IM service. You can also
enter the settings manually.
3. To log out, select Options > Log out.
Start a new conversation
To start a new IM conversation, in the application main
view, scroll to an IM contact list. If the list is closed, press
the scroll key to expand it to show the contacts in the list.
IM views
In the application main view, select
•
•
User ID — to view your own IM status and identity
Conversations — to view a list of IM conversations,
chat groups, and received invitations, and to open a
chat group, conversation or invitation
Scroll to the desired contact in the contact list. An icon
indicates the availability of the contact. To start a
conversation with the contact, press the scroll key.
When you have selected a contact, the conversation view
will open with the editor box in focus, and you can start
to type your message in the editor box.
To view your contacts, select a contact list name.
The following options are available:
•
•
•
New conversation — Start or continue a conversation
with an IM user.
View and start conversations
New IM contact — Create, edit, or view the online
status of your IM contacts.
Under the Conversations heading you can see a list of the
contacts with whom you have an ongoing conversation.
Ongoing conversations are automatically closed when you
exit IM.
Saved conversations — View a previous instant
messaging session that you saved.
When you open a conversation, the conversation view
shows the messages that have been sent and received. To
send a new message, type the message in the editing box
at the bottom of the screen.
To view a conversation, scroll to a participant, and press
the scroll key.
To continue the conversation when you are viewing it,
write your message, and press the scroll key.
55
To return to the conversations list without closing the
•
Availability reloading — To select how to update
information about whether your contacts are online or
offline, select Automatic or Manual.
conversation, select Back.
To close the conversation, select Options > End
•
•
•
•
•
Offline contacts — Select whether contacts with an
offline status are shown in the contacts list.
Own message colour — Select the colour of the
instant messages you send.
conversation.
To start a new conversation, select Options > New
conversation.
Received message colour — Select the colour of the
instant messages you receive.
Change your own status
Show date/ time info — To view the date and time
of the instant messages in conversations, select Yes.
IM alert tone — Change the tone that sounds when
you receive a new instant message.
To change your own IM status that is seen by other IM
users, in the application main view, scroll to the first item.
To select a new status, press the scroll key. Scroll to the
new status, and press the scroll key.
Retrieve IM contact lists
You can retrieve contact lists from the server, or add a new
contact to a contact list. When you log in to the server, the
previously used contact lists are retrieved from the server
automatically.
Modify your personal IM
preferences
Select Options > Settings > Preferences and from the
following:
•
Use screen name (shown only if IM groups are
supported by the server) — To enter a nickname, select
Yes.
Record chats
When viewing the content of a conversation, to record the
messages that are exchanged during a conversation or
while you are joined to an IM group, select Options >
Save conversation.
•
•
•
Show my availability — To allow others to see if you
are online, select To everyone.
Allow messages from — To allow messages from all,
select All.
To stop recording, select Options > Stop recording.
Allow messages from — To allow messages only from
your contacts, select IM contacts only. IM invitations
are sent by contacts who want you to join their groups.
Sort IM contacts — Select how your contacts are
sorted: Alphabetically or By online status.
To view the recorded chats, in the main view, select
Options > Saved conversations.
•
56
Search for IM groups and users IM groups
To search for IM groups and users, in the IM community
main view, first scroll to an item such as one of your own
status items, or to an item within one of your IM contact
lists.
To join an IM group saved under the Conversations
heading, scroll to the group you want to join and press the
scroll key.
After you join an IM group, you can view the messages that
are exchanged there and send your own messages.
To search for groups, select Options > New
conversation > Search for groups . You may be able to
search by group name, topic, and members (user ID).
To send a message, write the message in the editing box
at the bottom of the screen, and press the scroll key.
To search for users, select Options > New IM contact >
Search from server. You may be able to search by user's
name, user ID, phone number, and e-mail address.
To send a private message to a participant, select
Options > Send private message.
To reply to a private message sent to you, select the
When a search is complete, select Options and from the
message and Options > Reply.
following:
To invite IM contacts who are online to join the IM group,
•
•
More results — To retrieve further search results.
Previous results — To retrieve previous search results
if they are available.
select Options > Send invitation.
To prevent receiving messages from certain participants,
select Back > Options > Blocking options.
•
•
Add to IM contacts — To add a contact to your IM
contacts.
To leave the IM group, select Options > Leave IM
Open conversation — To open a conversation with a
contact.
group.
•
•
Send invitation — To invite a contact to chat.
Blocking options — To block messages from a
contact, add a contact to the blocked list, or view the
list of blocked contacts.
IM server settings
Select Options > Settings. The settings may be
preconfigured in your device, or you may receive the
settings as a confirmation message from the service
provider that offers the IM service. You obtain the user ID
and password from your service provider when you
register to the service. If you do not know your user ID and
password, contact your service provider.
•
•
Join — To join the chat group.
Save — To save a retrieved chat group as a favourite
visible under the Conversations heading.
New search — To start a new search with different
criteria.
•
The available options will vary depending on the IM server.
The following settings are available:
57
•
Preferences — Modify your IM settings.
•
•
Servers — View a list of all defined IM servers.
Default server — Change the IM server to which you
want to connect.
•
IM login type — To log in automatically when youstart
IM, select On app. start-up.
To add a new server to your list of IM servers, select
Servers > Options > New server. Enter the following
server settings:
•
•
Server name — The name of the chat server.
Access point in use — The access point you want to
use for the server.
•
•
•
Web address — The URL address of the IM server.
User ID — Your user ID.
Password — Your login password.
58
Phone
To make and receive calls, the device must be switched on, a new incoming call. The first call is put on hold. To end
it must have a valid SIM card installed, and you must be
the active call, press the end key.
located in the service area of a cellular network.
To make or receive a net call, your device must be
connected to a net call service. To connect to a net call
service, your device must be in the coverage of a
connection network, such as a wireless LAN (WLAN) access
point.
Make a call
Important: If the device has been locked, enter the
lock code to activate the phone function.
When the device is locked, calls may be possible to the
official emergency number. Making an emergency call in
the offline profile or when the device is locked requires
that the device recognise the number to be an official
emergency number. It is advisable to change the profile
or unlock the device by entering the lock code before you
make the emergency call.
Voice calls
Note: The actual invoice for calls and services from
your service provider may vary, depending on network
features, rounding off for billing, taxes, and so forth.
To make a call, enter the phone number, including the area
code, and press the call key.
Answer a call
Tip: For international calls, add the + character that
replaces the international access code, and enter
the country code, area code (omit the leading 0, if
necessary), and phone number.
To answer a call, press the call key.
To reject a call, press the end key.
To mute the ringing tone instead of answeringa call, select
To end the call or cancel the call attempt, press the end
Silence.
key.
When you have an active call and the call waiting function
59
(network service) is activated, press the call key to answer
To make a call using the saved contacts, open the contacts.
Enter the first letters of the name, scroll to the name, and
press the call key.
To make a call using the log, press the call key to view up
to 20 numbers that you last called or attempted to call.
Scroll to the desired number or name, and press the call
key.
To adjust the volume of an active call, use the volume keys.
To switch from a voice call to a video call, select Options >
Switch to video call. The device ends the voice call and
makes a video call to the recipient.
Voice mail
Select Menu > Control panel > Phone > Call
mailbox.
When you open the Voice mail application for the first
time, you are asked to enter the number of your voice
mailbox.
To call your voice mailbox, scroll to Voice mailbox, and
select Options > Call voice mailbox.
If you have configured net call settings to your device and
have an internet call mailbox, to call the mailbox, scroll to
the mailbox, and select Options > Call internet call
mbx..
Make a conference call
To call your mailbox in the home screen, press and hold
1; or press 1 and then the call key. Select the mailbox you
want to call.
1. To make a conference call, enter a participant's phone
number, and press the call key.
2. When the participant answers, select Options > New
To change the mailbox number, select the mailbox and
call.
Options > Change number.
3. When you have made a phone call to all the
participants, select Options > Conference to merge
the calls into a conference call.
Video calls
To mute the microphone during the call, press the mute
key.
About video calls
To drop a participant from the conference call, scroll to the
participant, and select Options > Conference > Drop
participant.
To be able to make a video call, you need to be in the
coverage of a UMTS network. For availability and
subscription to video call services, contact your service
provider. While talking, you can see a real-time, two-way
video between you and the recipient of the call, if the
recipient has a compatible device. The video image
recorded by the camera in your device is shown to the
To discuss privately with a conference call participant,
scroll to the participant, and select Options >
Conference > Private.
60
video call recipient. A video call can only be made between To end the video call and make a new voice call to the same
two parties.
recipient, select Options > Switch to voice call.
Make a video call
Video sharing
Use video sharing (network service) to send live video or
a video clip from your mobile device to another
compatible mobile device during a voice call.
Warning: Do not hold the device near your ear when
the loudspeaker is in use, because the volume may be
extremely loud.
The loudspeaker is active when you activate video sharing.
If you do not want to use the loudspeaker for the voice call
while you share video, you can also use a compatible
headset.
To make a video call, enter the phone number or select the
recipient from the contacts list and Options > Call >
Video call. When the video call starts, the camera of the
device is activated. If the camera is already in use, video
sending is disabled. If the recipient of the call does not
want to send video back to you, a still image is shown
instead. To define the still image sent from your device
instead of video, select Menu > Control panel >
Settings and Phone > Call > Image in video call.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing.
To disable the sending of audio, video, or video and audio,
select Options > Disable > Sending audio, Sending
video, or Sending aud. & video.
Video sharing requirements
Video sharing requires a UMTS connection. For more
information on the service, UMTS network availability, and
fees associated with using this service, contact your
service provider.
To adjustthe volume of an activevideo call, usethevolume
keys.
To use the loudspeaker, select Options > Activate
loudspeaker. To mute the loudspeaker and use the
earpiece, select Options > Activate handset.
To use video sharing you must do the following:
•
•
Ensure that your device is set up for person-to-person
connections.
To swap the places of images, select Options > Swap
Ensure you have an active UMTS connection and are
within UMTS network coverage. If you move outside the
UMTS network during a video sharing session, the
sharing stops while your voice call continues.
images.
To zoom the image on the display, select Options >
Zoom and scroll up or down.
61
•
Ensure that both the sender and recipient are
registered to the UMTS network. If you invite someone
to a sharing session and the recipient’s device is not
within UMTS network coverage, does not have video
sharing installed, or person-to-person connections set
up, the recipient does not receive invitations. You
receive an error message that indicates that the
recipient cannot accept the invitation.
If you do not know the SIP address for the contact, you
can use the phone number of the recipient, including
the country code, to share video (if supported by the
network service provider).
UMTS connection settings
To set up your UMTS connection:
•
Contact your serviceprovider to establish an agreement
for you to use the UMTS network.
•
Ensure that the UMTS access point connection settings
for your device are configured properly. For more
information about the settings, contact your service
provider.
Video sharing settings
To adjust video sharing settings, select Menu > Control
panel > Settings and Connection > Video sharing.
To set up video sharing, you need person-to-person and
UMTS connection settings.
Share live video or video clips
Person-to-person connection settings
During an active voice call, select Options > Share
A person-to-person connection is also known as a session
initiation protocol (SIP) connection. The SIP profile
settings must be configured in your device before you can
use video sharing. Contact your service provider for the SIP
profile settings, and save them to your device. Your service
provider may send you the settings or give you a list of the
needed parameters.
video.
1. To share live video during the call, select Live video.
To share a video clip, select Video clip and the clip you
want to share.
You may need to convert the video clip into a suitable
format to be able to share it. If your device notifies you
that the video clip must be converted, select OK. Your
device must have a video editor for the conversion to
work.
To add a SIP address to a contact:
1. Select Menu > Contacts.
2. Select the contact, or create a new contact.
3. Select Options > Edit.
2. If the recipient has several SIP addresses or phone
numbers including the country code saved in the
contacts list, select the desired address or number. If
the SIP address or phone number of the recipient is not
available, enter the address or number of the recipient
including the country code, and select OK to send the
4. Select Options > Add detail > Share video.
5. Enter the SIP address in the format
username@domainname (you can use an IP address
instead of a domain name).
62
invitation. Your device sends the invitation to the SIP
address.
If someone sends you a share invitation and you are not
within UMTS network coverage, you will not know that you
received an invitation.
Sharing begins automatically when the recipient
accepts the invitation.
When you receive an invitation, select from the following:
Options during video sharing
•
Yes — Accept the invitation, and activate the sharing
session.
Zoom the video (available for sender only).
Adjust the brightness (available for sender only).
•
No — Reject the invitation. The sender receives a
message that you rejected the invitation. You can also
press the end key to reject the invitation and end the
voice call.
or
or
or
Mute or unmute the microphone.
Turn the loudspeaker on and off.
To mute the video on your device, select Options >
Pause and resume video sharing.
Mute.
Switch to full screen mode (available for receiver
To play the video at the original volume, select Options >
Original volume. This does not affect the audio playback
of the other party of the phone call.
only).
3. To end the sharing session, select Stop. To end the
voice call, press the end key. When you end the call,
video sharing also ends.
To end the sharing session, select Stop. To end the voice
call, press the end key. When you end the call, also video
sharing ends.
To save the live video you shared, select Yes when
prompted. The device notifies you of the location of the
saved video.
If you access other applications while you are sharing a
video clip, the sharing is paused. To return to the video
sharing view, and to continue sharing, in the home screen,
select Options > Continue.
Internet calls
About internet calls
With the internet call service (network service), you can
make and receive calls over the internet. Internet calls can
be established between computers, between mobile
phones, and between a VoIP device and a traditional
telephone.
Accept an invitation
When someone sends you a video sharing invitation, the
invitation message displays the sender’s name or SIP
address. If your device is not set to silent, it rings when
you receive an invitation.
To be able to use the service, you must subscribe to the
service, and have a user account.
63
To make or receive an internet call, you must be in the
service area of a wireless LAN, and connected to an
internet call service.
1. To make an internet call to an internet address that
does not start with a digit, press any number key in the
home screen, then press # for a few seconds to clear
the display and to switch from number mode to letter
mode.
2. Enter the internet address, and press the call key.
Activate internet calls
Select Menu > Contacts. Scroll left, and select the
internet calls service from the list.
Blocked contacts
To make or receive internet calls, contact your service
provider to receive the internet call connection settings.
To connect to an internet call service, your device must be
in a network service area.
Select Menu > Contacts. Scroll left, and select the
internet calls service from the list.
Blocked contacts are prevented from seeing your online
status.
To activate your internet call service, select Options >
Activate service.
To see your blocked contacts, select Options > View
blocked list.
To search for available wireless LAN (WLAN) connections,
select Options > Search for WLAN.
To add a contact to your blocked contacts list, scroll to the
contact, and select Options > Block contacts.
Tip: When you have activated an internet call
service, you can make an internet call from all
applications where you can make a regular voice
call.
To unblock a contact, scroll to the contact, and select
Options > Unblock. When you unblock a contact, you
allow the contact to see your online status.
Make internet calls
Manage internet call services
When you have activated the internet call feature, you can
make an internet call from all applications where you can
make a regular voice call, such as the contacts list or log.
For example, in the contacts list, scroll to the desired
contact, and select Options > Call > Internet call.
Select Menu > Control panel > Net settings.
To add a new internet call service, select Add new
service.
To view or edit advanced call settings, select Advanced
settings.
To make an internet call in the home screen, enter the
phone number or internet address, and select Net call.
64
To delete the phone number assigned to a number key,
scroll to the speed dialling key, and select Options >
Remove.
Internet call settings
Select Menu > Contacts. Scroll left, and select the
internet calls service from the list.
To modify a phone number assigned to a number key,
scroll to the speed dialling key, and select Options >
Change.
To view or edit internet call settings, select Options >
Settings and from the following:
•
Service connectivity — Select the destination settings
for internet call connectivity, and edit destination
details.
Call divert
To change a destination, scroll to the service, and select
Select Menu > Control panel > Settings and Phone >
Change.
Call divert.
•
Availability requests — Select whether to
automatically accept all incoming presence requests
without a confirmation query.
Divert incoming calls to your voice mailbox or to another
phone number. For details, contact your service provider.
•
•
Service information — View technical information
about the selected service.
Select the type of calls to divert and from the following
options:
Advanced settings — Set advanced settings for the
service, such as security settings.
•
All voice calls, All data calls, or All fax calls — Divert
all incoming voice, data, or fax calls. You cannot answer
data or fax calls, only divert the calls to another number.
If busy — Divert incoming calls if you have an active
call.
•
•
Speed dialling
If not answered — Divert incoming calls after your
device rings for a specified length of time. Select the
length of time for the device to ring before diverting
the call.
Select Menu > Control panel > Settings and Phone >
Call > Speed dialling.
Speed dialling allows you to make a call by pressing and
holding a number key in the home screen.
•
•
If out of reach — Divert calls when the device is
switched off or out of network coverage.
If not available — Divert calls if you have an active
call, do not answer, or the device is switched off or out
of network coverage.
To activate speed dialling, select On.
To assign a number key to a phone number, selectMenu >
Control panel > Phone > Speed dial. Scroll to the
number key (2 - 9) on the display, and select Options >
Assign. Select the desired number from the contacts list.
To divert calls to your voice mailbox, select a call type, a
diverting option, andOptions > Activate > To voice
mailbox.
65
To divert calls to another phone number, select a call type,
a diverting option, and Options > Activate > To other
number. Enter the number, or select Find to retrieve a
number saved in Contacts.
•
International calls except to home country
— Prevent calls to foreign countries or regions, but
allow calls to your home country.
To check the status of voice call barrings, select the barring
To check thecurrentdivertingstatus, scrollto thediverting
option and Options > Check status.
option, and select Options > Check status.
To stop all voice call barrings, select a barring option and
To stop diverting calls, scroll to the diverting option, and
Options > Deactivate all barrings.
select Options > Deactivate.
To change the password used for barring voice, fax, and
data calls, select Voice call barring > Options > Edit
barring password. Enter the current code, then the new
code twice. The barring password must be four digits long.
For details, contact your service provider.
Call barring
Select Menu > Control panel > Settings and Phone >
Call barring.
You can bar the calls that can be made or received with
the device (network service). To change the settings, you
need the barring password from your service provider. Call
barring affects all call types.
Bar net calls
Select Menu > Control panel > Settings and Phone >
Call barring > Internet call barring.
Call barring and call diverting cannot be active at the same
To reject net calls from anonymous callers, select
time.
Anonymous call barring > On.
When calls are barred, calls may be possible to certain
official emergency numbers.
To bar calls, select Voice call barring and from the
Send DTMF tones
following:
You can send dual-tone multifrequency (DTMF) tones
during an active call to control your voice mailbox or other
automated phone services.
•
Outgoing calls — Prevent making voice calls with your
device.
•
•
Incoming calls — Prevent incoming calls.
International calls — Prevent calling to foreign
countries or regions.
Send a DTMF tone sequence
1. Make a call, and wait until the recipient answers.
2. Select Options > Send DTMF.
•
Incoming calls when roaming — Prevent incoming
calls when outside your home country.
66
3. Enter the DTMF tone sequence, or select a predefined
sequence.
To use voice commands to make a call, select Voice
commands.
Attach a DTMF tone sequence to a contact card
To have your received messages read aloud, select
Message reader.
1. Select Menu > Contacts. Select a contact and
Options > Edit > Options > Add detail > DTMF.
To hear the current time, select Clock. To hear the current
date, scroll down.
2. Enter the tone sequence. To insert a pause of about 2
seconds before or between DTMF tones, enter p. To set
the device to send the DTMF tones only after you select
Send DTMF during a call, enter w. To enter p and w
with the keypad, press * repeatedly.
If the calendar alarm expires when you are using voice aid,
the application reads the calendar alarm content aloud.
To hear the available options, select Options.
3. Select Done.
Voice commands
Use voice commands to make phone calls and launch
applications, profiles, or other functions on the device. To
start voice recognition, press and hold the mute key.
Select Menu > Control panel > Phone > Voice
Talking theme
comm..
Select Menu > Control panel > Themes and Home scr.
theme > Talking theme
When the talking theme is activated, a list of functions
supported by talking theme is displayed in the home
screen. Scroll through the functions, and at the same time,
the device reads the displayed functions aloud. Select the
desired function.
The device creates a voice tag for the entries in Contacts
and for the functions designated in the Voice commands
application. When a voice command is spoken, the device
compares the spoken words to the voice tag stored in the
device. Voice commands are not dependent on a speaker’s
voice; however, the voice recognition in the device adapts
to the main user’s voice to recognise voice commands
better.
To hear the entries in your contacts list, select Call
features > Contacts.
To hear information on your missed and received calls,
dialled numbers and frequent calls, select Call features >
Recent calls.
To make a call by entering the phone number, select Call
Make a call
features > Dialler and the desired numbers.
A voice tag for a contact is the name or nickname that is
saved for the contact in the contacts list.
To call your voice mailbox, select Call features > Voice
67
mailbox.
To change the voice command of an application, select
Options > Change command, and enter the new
command.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialling in all circumstances.
To listen to a voice tag, select a contact and Options >
Change profiles
Play voice tag.
Select Menu > Control panel > Phone > Voice
1. To make a call using a voice command, press and hold
comm..
the mute key.
The device creates a voice tag for each profile. To activate
a profile using a voice command, press and hold the mute
key in the home screen, and say the name of the profile.
2. When you hear the tone or see the visual display,
clearly say the name saved for the contact.
3. The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout of
1.5 seconds, the device dials the number. If the
recognised contact was not correct, select Next to view
a list of other matches, or Quit to cancel dialling.
To change the voice command, select Profiles >
Options > Change command.
Voice command settings
Select Menu > Control panel > Phone > Voice
If several numbers are saved for the contact, the device
selects the default number, if it has been set.
Otherwise, the device selects the first available number
from the phone number fields.
comm..
To turn off the synthesiser that plays recognised voice
commands in the selected device language, select
Options > Settings > Synthesiser > Off.
To reset voice recognition learning when the main user of
Launch an application
the device has changed, select Remove voice adapts..
The device creates voice tags for the applications listed in
the Voice commands application. You can also add more
applications to the list.
Push to talk
To launch an application using a voice command, press
and hold the mute key, and clearly say the name of the
application. If the recognised application was not correct,
select Next to view a list of other matches, or Quit to
cancel.
Some features may not be available in your region. Please
check the availability with local operator.
Select Menu > Applications > PTT.
68
that were active the last time you closed the application.
If the connection fails, to attempt to log in again, select
Options > Log in to PTT.
About push to talk
Push to talk (PTT) (network service) is a real-time voice-
over-IP service that uses a GSM or GPRS network. PTT
provides direct voice communication, with the push of a
key. Use PTT to have a conversation with one person or
with a group of people.
To exit PTT, select Options > Exit.
To switch to another open application , press and hold the
menu key.
Before you can use PTT, you must define the PTT settings
(access point, PTT, SIP, XDM and Presence). Youmayreceive
the settings in a special text message from the service
provider that offers the PTT service. You can also use the
Settings wizard application to configure PTT, if supported
by your service provider. For more information on the PTT
application, see the user guide for your device or your local
Nokia website.
Make and receive a PTT call
Warning: Do not hold the device near your ear when
the loudspeaker is in use, because the volume may be
extremely loud.
To make a PTT call, press and hold the call key as long as
In PTT communication, one person talks while the others
you talk. To listen to the response, release the call key.
listen through the built-in loudspeaker.
To check the login status of your contacts, in PTT, select
Options > PTT contacts > Contacts and from the
following:
Warning: Do not hold the device near your ear when
the loudspeaker is in use, because the volume may be
extremely loud.
•
•
•
— person available
— person unknown
Speakers take turns responding to each other. Because
only one group member can talk at any time, the
maximum duration of a speech turn is limited. The
maximum duration is usually set to 30 seconds. For details
of the speech turn duration for your network, contact your
service provider.
— person does not want to be disturbed, but can
receive callback request
•
— person has PTT switched off
This service depends on your network operator and is only
available for subscribed contacts. To subscribe a contact,
select Options > Show login status.
Phone calls always take priority over push to talk activities.
Make a one-to-one call
contact you want to talk to and Options > Talk 1 to 1.
Log in and exit PTT
Select Options > PTT contacts > Contacts. Select the
69
When you start the push to talk (PTT) service, you are
automatically logged in and connected to the channels
Press and hold the PTT key the entire time you are talking. To respond to a callback request:
When you have finished, release the key.
Select Show, a contact, and Options > Talk 1 to 1 to start
To talk to acontact, pressand hold the PTT keyalso inother a one-to-one call.
views in the PTT application, for example, the Contacts
view.
PTT groups
To make a new phone call, first end the one-to-one call.
Select Disconnect.
Channels
Tip: Hold the device in front of you during a PTT call
so you can see the display. Speak towards the
microphone, and do not cover the loudspeaker with
your hands.
A PTT channel consists of a group of people (for example,
friends or a work team) who joined the channel after they
were invited. When you call a channel, all members joined
to the channel hear the call simultaneously.
You can join pre-configured channels. Public channels are
Make a group call
open to anyone who knows the URL for the channel.
To call a group, select Options > PTT contacts >
Contacts, mark the contacts you want to call, and select
Options > Talk to many.
When you are connected to a channel and talk, all
members joined to the channel hear you talking. Up to five
channels can be active at the same time.
Answer a PTT call
Select Options > PTT contacts > Netw. grps./
channels.
To answer a one-to-one call, press the call key. To dismiss
the call, press the end key.
To connect to a public pre-configured network group or
channel for the first time, you must first create the group
or channel. Select Options > Add existing, and enter the
required information. After the link to the group has been
created, you can attempt to join the group.
Tip: You can also make a one-to-one or group call
from Contacts. Select Options > PTT > Talk 1 to
1 or Talk to many.
Network groups
Callback requests
Network groups consist of pre-configured lists of
members that are stored on the server. You can define
participants by adding them to the member list. When you
want to talk to a network group, you can select the group,
and make a call to it. The server calls each participant in
the group, and the call is ready when the first participant
answers.
To send a callback request:
In the contacts list, scroll to the desired name, and select
Options > Send callback request.
When someone sends you a callback request, 1 new
70
callback request is displayed in the home screen.
To make a call, select Options > PTT contacts > Netw. To view the currently active members of a channel during
grps./ channels, open the PTT groups tab, select a group, an active call to the channel, select Options > Active
and press the PTT key.
members.
When you have finished the PTT call, select Disconnect.
Create a channel group
To invite new members to an active call, select the channel
when you are connected to it. Select Options > Send
invitation to open the invitation view. You can only invite
new members when you are the host of a private channel,
or when the channel is a public channel. Channel
invitations are text messages.
You can also advertise your channel, so that others may
become aware of it and then join. Select Options > Send
invitation, and enter the required information.
To create a new configured network group or channel,
select Options > Create new, PTT network group, or
PTT channel.
You can create your own public channels, choose your own
channel name, and invite members. Those members can
invite more members to the public channel.
You may also set up private channels. Only users invited
by the host are allowed to join and use private channels.
For each channel, define Network group name,
Nickname, and Thumbnail (optional).
Respond to a channel invitation
When you have successfully created a channel, you are
asked if you want to send channel invitations. Channel
invitations are text messages.
To save a received channel invitation, select Options >
Save channel. The channel is added to your PTT contacts,
channels view.
After you save the channel invitation, you are asked if you
want to connect to the channel. Select Yes to open the PTT
sessions view. Your device logs in to the service, if you are
not logged in already.
If you reject or clear the invitation, the invitation is stored
in your messaging inbox. To join the channel later, open
the invitation message, and save the invitation. Select
Yes from the dialog to connect to the channel.
Talk to a channel or group
To talk to a channel after you log in to thePTTservice, press
the PTT key. A tone sounds, indicating that access is
granted. Continue to press and hold the PTT key the entire
time you are talking. When you finish talking, release the
key.
If you try to respond to a channel by pressing the PTT key
while another member is talking, Wait is displayed.
Release the PTT key, wait for the other person to finish
talking, and press the PTT key again. Alternatively, press
and hold the PTT key, and wait for Talk to be displayed.
View the PTT log
Select Options > PTT log and Missed PTT calls, Received
When you are talking in a channel, the first person to press
the PTT key when someone stops talking can talk next.
PTT calls, orCreated PTT calls.
71
To make a one-to-one call from the PTT log, select a
contact, and press the PTT key.
Log
Select Menu > Log.
The Log application stores information about the
communication history of the device. The device registers
missed and received calls only if the network supports
these functions, and if the device is switched onandwithin
the network service area.
PTT settings
To change your PTT user settings, select Options >
Settings and from the following:
•
•
•
•
•
•
Incoming calls — Select whether to allow or block PTT
calls.
Incoming callback reqs. — Select whether to receive
or block incoming callback requests.
Call and data registers
Accepted list calls — Select whether to be notified of
incoming PTT calls or to answer the calls automatically.
Callback request tone — Select a ringing tone for
callback requests.
Select Menu > Log.
To view recently missed, received, and dialled calls, select
Recent calls.
Application start-up — Select if you want to log in to
the PTT service when you switch on your device.
Default nickname — Enter your default nickname that
is displayed to other users. You may not be able to edit
this setting.
Tip: To view the dialled numbers when in the home
screen, press the call key.
To view the approximate duration of calls to and from your
device, select Call duration.
•
Show my PTT address — Select when to show you
PTT address to the other parties of the call. You may not
be able to select some of the options.
To view the amount of data transferred during packet data
connections, select Packet data.
•
•
•
Accepted list — Select who you want to allow to
contact you.
Monitor all communications
Blocked list — Select who you never want to be able
to contact you.
Select Menu > Log.
Show my login status — Select when to show your
current login status to others. Your service provider
may not necessarily support this feature.
Connection settings — Select to edit your connection
settings if necessary (these settings, including SIP, XDM
and Presence settings, may have been delivered over
the air).
To monitor all voice calls, text messages, or data
connections registered by the device, open the general log
tab
.
•
To view detailed information about a communication
event, select the event.
72
Tip: Subevents, such as sending a text message in
more than one part or opening a packet data
connection, are logged as one communication
event. Connections to your mailbox, multimedia
messaging centre, or web pages are shown as
packet data connections.
Log settings
To set the time for keeping all communication events in
the log, select Options > Settings > Log duration and
the time. If you select No log, all log contents are
permanently deleted.
Select Menu > Log.
To add the phone number from a communication event to
Contacts, select Options > Save to Contacts, and create
a new contact, or add the phone number to an existing
contact.
To copy the number, for example to paste it to a text
message, select Options > Use number > Copy.
To view a single type of communication event or
communication events with one other party, select
Options > Filter and the desired filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select
Options > Clear log.
Call and send messages from
Log
Select Menu > Log.
To call back a caller, select Recent calls > Missed calls,
Received calls, or Dialled numbers. Select the caller and
Options > Call.
To reply to a caller with a message, select Recent calls >
Missed calls, Received calls, or Dialled numbers. Select
the caller and Options > Create message, and send a
message.
73
Internet
With your Nokia E75, you can browse both the internet and
your company's intranet, and download and install new
applications to your device. You can also use your device
as a modem and connect your PC to the internet.
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java
Verified™ testing.
The homepage opens. To change the homepage, select
Web browser
Options > Settings.
With the Web browser application, you can view hypertext
markup language (HTML) web pages on the internet as
originally designed. You can also browse web pages that
are designed specifically for mobile devices, and use
extensible hypertext markup language (XHTML), or the
wireless markup language (WML).
To browse a web page, in the bookmarks view, select a
bookmark, or enter the address in the field ( ), and press
the scroll key.
Some web pages may contain material, such as graphics
and sounds, that require a large amount of memory to
view. If your device runs out of memory while loading such
a web page, the graphics on the page are not displayed.
To browse the web, you need to have an internet access
point configured in your device.
To browse web pages without graphics, to save memory,
select Options > Settings > Page > Load content >
Text only.
Browse the web
To enter a new web address you want to visit, select
Select Menu > Web.
Options > Go to web address.
Shortcut: To start the browser, press and hold 0 in
Tip: While browsing, to visit a web page saved as a
bookmark in the bookmarks view, press 1, and
select a bookmark.
the home screen.
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
To refresh the content of the web page, select Options >
Navigation options > Reload.
74
To save the current web page as a bookmark, select
Browser toolbar
Options > Save as bookmark.
The browser toolbar helps you select frequently used
functions of the browser.
To view snapshots of the web pages you have visited
during the current browsing session, select Back
(available if History list is turned on in the browser
settings and the current web page is not the first web page
you visit). Select the web page you want.
To open the toolbar, press and hold the scroll key on an
empty spot on a web page. To move within the toolbar,
scroll left or right. To select a feature, press the scroll key.
In the toolbar, select from the following:
To save a web page while browsing, select Options >
Tools > Save page.
•
Frequently used links — View a list of the web
addresses you visit frequently.
You can save web pages and browse them later when
offline. You can also group web pages into folders. To
access the web pages you have saved, select Saved
pages in the Web browser main view.
•
Page overview — See an overview of the current web
page.
•
•
•
Find — Search for keywords within the current page.
Reload — Refresh the page.
To open a sublist of commands or actions for the current
web page, select Options > Service options (if
supported by the web page).
Subscribe to web feeds (if available) — View a list of
available web feeds on the current web page, and
subscribe to a web feed.
To prevent or allow the automatic opening of multiple
windows, select Options > Block pop-ups or Allow pop-
ups.
Navigate pages
Shortcuts while browsing
Mini Map and page overview help you navigate web pages
that contain a large amount of information.
•
•
•
•
•
Press 1 to open your bookmarks.
When Mini Map is set on in the browser settings and you
scroll through a large web page, Mini Map opens and
shows an overview of the web page you browse.
Press 2 to search for keywords on the current page.
Press 3 to return to the previous page.
Press 5 to list all open windows.
To set Mini Map on, select Options > Settings >
Press 8 to show the page overview of the current page.
Press 8 again to zoom in and view the desired section
of the page.
General > Mini map > On.
To move in Mini Map, scroll left, right, up, or down. When
you find the desired location, stop scrolling. Mini Map
disappears and leaves you at the selected location.
•
•
•
Press 9 to enter a new web address.
Press 0 to go to the home page (if defined in settings).
Press * and # to zoom in or out on the page.
75
When you are browsing a web page that contains a large reports, to your device. Installed widgets appear as
amount of information, you can also use Page overview
separate applications in the Applications folder.
to view what kind of information the page contains.
You can download widgets using the Download!
application or from the web.
To show the page overview of the current page, press 8.
To find the desired spot on the page, scroll up, down, left,
or right. Press 8 again to zoom in and view the desired
section of the page.
The default access point for widgets is the same as in the
web browser. When active in the background, some
widgets may update information automatically to your
device.
Using widgets may involve the transmission of large
amounts of data through your service provider's network.
Contact your service provider for information about data
transmission charges.
Web feeds and blogs
Web feeds are xml files on web pages that are used by the
weblog community and news organisations to share the
latest headlines or text, for example, news feeds. Blogs or
weblogs are web diaries. Most of the web feeds use RSS
and Atom technologies. It is common to find web feeds on
web, blog, and wiki pages.
Content search
To search for keywords, phone numbers, or e-mail
addresses within the current web page, select Options >
Find and the desired option. To go to the previous match,
scroll up. To go to the next match, scroll down.
The Web application automatically detects if a web page
contains web feeds.
To subscribe to a web feed, select Options > Subscribe
to web feeds.
Tip: To search for keywords within the page, press
2.
To view the web feeds to which you have subscribed, in
the bookmarks view, select Web feeds.
To update a web feed, select it and Options > Refresh.
Download and purchase items
To define how the web feeds are updated, select
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can
be provided free of charge, or you can purchase them.
Downloaded items are handled by the respective
applications in your device, for example, a downloaded
photo can be saved in Photos.
Options > Settings > Web feeds.
Widgets
Your device supports widgets. Widgets are small,
downloadable web applications that deliver multimedia,
news feeds, and other information, such as weather
76
You can save URL addresses as bookmarks while browsing
on the internet. You can also save addresses received in
messages to your bookmarks and send saved bookmarks.
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java Verified
testing.
To open the bookmarks view while browsing, press 1, or
select Options > Bookmarks.
To download an item:
1. Select the link.
To edit the details of a bookmark, such as the title, select
Options > Bookmark manager > Edit.
2. Select the appropriate option to purchase the item (for In the bookmarks view, you can also open other browser
example, Buy).
folders. The Web application allows you to save web pages
during browsing. In the Saved pages folder, you can view
the content of the pages you have saved offline.
3. Carefully read all the information provided.
4. To continue or cancel the download, select the
Web also keeps track of the web pages you visit during
browsing. In the Recently visited pages folder, you can
view the list of visited web pages.
appropriate option (for example, Accept or Cancel).
When you start a download, a list of ongoing and
completed downloads from the current browsing session
is displayed.
In Web feeds, you can view saved links to web feeds and
blogs to which you have subscribed. Web feeds are
commonly found on major news organisation web pages,
personal weblogs, online communitiesthatofferthe latest
headlines, and article summaries. Web feeds use RSS and
Atom technologies.
To modify the list, select Options > Downloads. In the
list, scroll to an item, and select Options to cancel ongoing
downloads, or open, save, or delete completed
downloads.
Bookmarks
Empty the cache
The bookmarks view opens when you open the Web
application. You can select web addresses from a list or
from a collection of bookmarks in the Recently visited
pages folder. You can also enter the URL address of the
web page you want to visit directly into the field ( ).
The information or services you have accessed are stored
in the cache memory of the device.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
accessed are stored in the cache.
indicates the starting page defined for the default
access point.
To empty the cache, select Options > Clear privacy
77
data > Cache.
General settings
End the connection
•
Access point — Change the default access point. Some
or all access points may be preset for your device by
your service provider; you may not be able to change,
create, edit, or remove them.
To end the connection and view the browser page offline,
select Options > Tools > Disconnect; or to end the
connection and close the browser, select Options >
Exit.
•
•
•
Homepage — Define the homepage.
Mini map — Turn Mini Map on or off.
History list — While browsing, to select Back to see a
list of the pages you have visited during the current
browsing session, turn History list on.
Security warnings — Hide or show security
notifications.
To take the browser to the background, press the end key
once. To end the connection, press and hold the end key.
To delete the information the network server collects
about your visits to various web pages, select Options >
Clear privacy data > Cookies.
•
•
Java/ECMA script — Enable or disable the use of
scripts.
Connection security
Page settings
If the security indicator ( ) is displayed during a
connection, the data transmission between the device and
the internet gateway or server is encrypted.
•
Load content — Select whether you want to load
images and other objects while browsing. If you select
Text only, to load images or objects later during
browsing, select Options > Tools > Load images.
Screen size — Select between full screen and the
normal view with the options list.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or the place where the requested resource is stored) is
secure. The service provider secures the data transmission
between the gateway and the content server.
•
•
Default encoding — If text characters are not shown
correctly, you can select another encoding according to
the language of the current page.
Security certificates may be required for some services,
such as banking services. You are notified if the identity of
the server is not authentic or if you do not have the correct
security certificate in your device. For more information,
contact your service provider.
•
•
•
Block pop-ups — Allow or block automatic opening of
pop-ups while browsing.
Automatic reload — If you want the web pages to be
refreshed automatically while browsing, select On.
Font size — Define the font size that is used for web
pages.
Web settings
Privacy settings
Select Menu > Web and Options > Settings.
Select from the following:
•
Recently visited pages — Enable or disable automatic
78
bookmark collecting. If you want to continue saving the
addresses of the visited web pages in the Recently
visited pages folder, but hide the folder from the
bookmarks view, select Hide folder.
To define the settings for the intranet connection, select
Options > Settings.
•
•
Form data saving — If you do not want the data you
enter in forms on a web page to be saved and used the
next time you open the page, select Off.
Download!
Cookies — Enable or disable the receiving and sending Select Menu > Download!.
of cookies.
With Download! (network service), you can browse,
download, and install items, such as latest applications
and related documents, to your device from the web.
Web feed settings
•
Automatic updates — Define whether you want web
feeds to be updated automatically and how often you
want to update them. Setting the application to
retrieve web feeds automatically may involve the
transmission of large amounts of data through your
service provider's network. Contact your service
provider for information about data transmission
charges.
The items are categorised under catalogues and folders
provided by Nokia or independent service providers. Some
items may be chargeable, but you can usually preview
them free of charge.
Download! uses available network connections to access
the most up-to-date content. For information on
additional items available through Download!, contact
your service provider, or the supplier or manufacturer of
the item.
•
Acc. point for auto-update — Select the desired
access point for updating. This option is only available
when Automatic updates is activated.
Only install and use applications and other software from
sources that offer adequate security and protection
against harmful software.
Browse the intranet
Select Menu > Office > Intranet.
To connect to an intranet, open the Intranet application
and select Options > Connect. If you have several
intranet destinations defined in Connection settings,
select Change destination to select which intranet to
browse.
Manage items
Select Menu > Download!.
To open an item or view the content of a folder or
catalogue, select the item, folder, or catalogue.
To buy the selected item, select Options > Buy.
To download an item that is free of charge, select
79
Options > Get.
To search for an item, select Options > Search.
To start, pause, resume, or cancel the download of the
selected item, select Options and the corresponding
option.
To adjust the settings, select Options > Applications >
Settings.
To view a list of downloaded items, select Options > My
items.
Download! settings
Select Menu > Download!.
To change the Download! settings, select Options >
Subscriptions
Applications > Settings and from the following:
Select Menu > Download! and Options > My items >
•
•
Network connection — Select the network
destination used for the network connection.
Automatic open — Select whether you want the
downloaded item or application to open automatically
after the download is completed.
My subscriptions.
To view file details of the selected item, select Options >
Open.
To renew or cancel a subscription, select Options and the
•
Preview confirmation — Select whether you want a
confirmation query to be shown before previewing an
item.
corresponding option.
•
•
Buy confirmation — Select whether you want a
confirmation query to be shown before buying an item.
Subscript. confirmation — Select whether you want
a confirmation query to be shown before subscribing
to an item.
Download! search
Select Menu > Download! and Options > Search.
Scroll to the catalogues from which you want to search for
items, select Mark, and enter the search keywords.
To start the search, select Options > Search.
Connect PC to web
Purchase history
You can use your device to connect your PC to the web.
Select Menu > Download! and My items > My
1. Connect the data cable to the USB connectors of your
downloads.
device and your PC.
To open the selected item with the corresponding
2. Select Connect PC to web. The necessary software is
application, select Options > Open.
automatically installed from your device to the PC.
To view file details of the selected item, select Options >
80
View details.
3. Accept the installation in your PC. Accept also the
connection, if prompted. When the connection to the
web is established, the web browser of your PC opens.
You must have administrator rights to your PC, and the
autorun option enabled in the PC.
81
Travelling
Need directions? Looking for a restaurant? Your device has receiver should only be used outdoors to allow reception
the tools to get you where you want to be.
of GPS signals.
Any GPS should not be used for precise location
measurement, and you should never rely solely on location
data from the GPS receiver and cellular radio networks for
positioning or navigation.
Positioning (GPS)
You can use applications such as GPS data to determine
your location, or measure distances and coordinates.
These applications require a GPS connection.
Different positioning methods can be enabled or disabled
in positioning settings.
Assisted GPS (A-GPS)
Your device also supports assisted GPS (A-GPS).
A-GPS is a network service.
About GPS
The coordinates in the GPS are expressed in the degrees
and decimal degrees format using the international
WGS-84 coordinate system.
Assisted GPS (A-GPS) is used to retrieve assistance data
over a packet data connection, which assists in calculating
the coordinates of your current location when your device
is receiving signals from satellites.
The Global Positioning System (GPS) is operated by the
government of the United States, which is solely
responsible for its accuracy and maintenance. The
accuracy of location data can be affected by adjustments
to GPS satellites made by the United States government
and is subject to change with the United States
When you activate A-GPS, your device receives useful
satellite information from an assistance data server over
the cellular network. With the help of assisted data, your
device can obtain the GPS position faster.
Department of Defense civil GPS policy and the Federal
Radionavigation Plan. Accuracy can also be affected by
poor satellite geometry. Availability and quality of GPS
signals may be affected by your location, buildings,
natural obstacles, and weather conditions. The GPS
Your device is preconfigured to use the Nokia A-GPS
service, if no service provider-specific A-GPS settings are
available. The assistance data is retrieved from the Nokia
A-GPS service server only when needed.
82
To disable the A-GPS service, select Menu >
Applications > GPS > GPS data and Options >
Positioning settings > Positioning methods >
Assisted GPS > Disable.
•
If you are indoors, go outdoors to receive a better
signal.
•
•
If you are outdoors, move to a more open space.
Ensure that your hand does not cover the GPS antenna
You must have an internet access point defined in the
device to retrieve assistance data from the Nokia A-GPS
service over a packet data connection. The access point for
A-GPS can be defined in positioning settings. A wireless
LAN (WLAN) access point cannot be used for this service.
Only a packet data internet access point can be used. Your
device asks you to select the internet access point when
GPS is used for the first time.
of your device.
•
•
If the weather conditions are bad, the signal strength
may be affected.
Some vehicles have tinted (athermic) windows, which
may block the satellite signals.
Check satellite signal status
To check how many satellites your device has found, and
whether your device is receiving satellite signals, select
Menu > Applications > GPS > GPS data and
Position > Options > Satellite status.
Hold your device correctly
The GPS receiver is located on the back of the device. When
using the receiver, make sure that you do not cover the
antenna with your hand.
If your device has found
satellites, abar for eachsatellite
is shown in the satellite info
view. The longer the bar, the
stronger the satellite signal.
When your device has received
enough data from the satellite
signal to calculate the
Establishing a GPS connection may take from a
couple of seconds to several minutes.
Establishing a GPS connection in a vehicle may
take longer.
The GPS receiver draws its power from the
device battery. Using the GPS receiver may
drain the battery faster.
coordinates of your location, the bar turns blue.
Initially, your device must receive signals from at least four
satellites to be able to calculate the coordinates of your
location. When the initial calculation has been made, it
may be possible to continue calculating the coordinates of
your location with three satellites. However, the accuracy
is generally better when more satellites are found.
Tips on creating a GPS
connection
If your device cannot find the satellite signal, consider the
following:
83
•
•
Add to category — Add a landmark to a category in
Landmarks. Select each category to which you want to
add the landmark.
Position requests
You may receive a request from a network service to
receive your position information. Service providers may
offer information about local topics, such as weather or
traffic conditions, based on the location of your device.
Send — Send one or several landmarks to a compatible
device. Your received landmarks are placed in the Inbox
folder in Messaging.
When you receive a position request, the service that is
making the request is displayed. Select Accept to allow
your position information to be sent or Reject to deny the
request.
You can sort your landmarks into preset categories, and
create new categories. To edit and create new landmark
categories, open the categories tab, and select Options >
Edit categories.
Landmarks
GPS data
Select Menu > Applications > GPS > Landmarks.
Select Menu > Applications > GPS > GPS data.
With Landmarks, you can save the position information of
specific locations in your device. You can sort the saved
locations into different categories, such as business, and
add other information to them, such as addresses. You can
use your saved landmarks in compatible applications, such
as GPS data.
GPS data is designed to provide route guidance
information to a selected destination, position
information about your current location, and travelling
information, such as the approximate distance to the
destination and the approximate duration of travel.
The coordinates in the GPS are expressed in degrees and
decimal degrees format using the international WGS-84
coordinate system.
GPS coordinates are expressed in the degrees and decimal
degrees format using the international WGS-84
coordinate system.
To use GPS data, the GPS receiver of your device must
initially receive position information from at least four
satellites to calculate the coordinates of your location.
When the initial calculation has been made, it may be
possible to continue calculating the coordinates of your
location with three satellites. However, the accuracy is
generally better when more satellites are found.
Select Options and from the following:
•
New landmark — Create a new landmark. To make a
positioning request for your current location, select
Current position. To select the location from map,
select Select from map. To enter the position
information manually, select Enter manually.
Edit — Edit or add information to a saved landmark
(for example, a street address).
•
Route guidance
Select Menu > Applications > GPS > GPS data and
84
Navigation.
Start the route guidance outdoors. If started indoors, the
GPS receiver may not receive the necessary information
from the satellites.
Trip meter
distance.
Select Menu > Applications > GPS > GPS data and Trip
Route guidance uses a rotating compass on the device
display. A red ball shows the direction to the destination,
and the approximate distance to it is shown inside the
compass ring.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
To turn trip distance calculation on or off, selectOptions >
Start orStop. The calculated values remain on the display.
Use this feature outdoors to receive a better GPS signal.
To set the trip distance and time and average and
maximum speeds to zero, and to start a new calculation,
select Options > Reset. To set the trip meter and total
time to zero, select Restart.
Route guidance is designed to show the straightest route
and the shortest distance to the destination, measured in
a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences
in altitude are not taken into account when calculating the
distance. Route guidance is active only when you move.
To set your trip destination, select Options > Set
destination and a landmark as the destination, or enter
the latitude and longitude coordinates.
Maps
To clear the destination set for your trip, select Stop
navigation.
Maps
Retrieve position information
Select Menu > Applications > GPS > Maps.
Select Menu > Applications > GPS > GPS data and
With Maps, you can see your current location on the map,
browse maps for different cities and countries, search for
addresses and different points of interest, plan routes
from one location to another, and save locations and send
them to compatible devices. You can also purchase
licences for extra services, such as travel guides, traffic
information, and navigation service with voice guidance.
These services are not available for all countriesor regions.
Position.
In the position view, you can view the position
information of your current location. An estimate of the
accuracy of the location is displayed.
To save your current location as a landmark, select
Options > Save position. Landmarks are saved locations
with more information, and they can be used in other
compatible applications and transferred between
compatible devices.
When you use Maps for the first time, you may need to
select an internet access point for downloading maps.
If you browse to an area which is not covered by maps
already downloaded in your device, a map for the area is
85
automatically downloaded through the internet. Some
maps may be available in your device or memory card. You
can also use the Nokia Map Loader PC software to
download maps. To install Nokia Map Loader to a
compatible PC, go to http://maps.nokia.com.
When the GPS connection is active,
location on the map.
To move on the map, scroll up, down, left, or right with
the scroll key. The map is oriented towards north by
default.
shows your current
Tip: To avoid data transfer costs, you can also use
Maps without an internet connection, and browse
the maps that are saved in your device or memory
card.
When you have an active connection and browse the map,
a new map is automatically downloaded if you scroll to an
area which is not covered by maps already downloaded.
The maps are automatically saved in the device memory
or on a compatible memory card (if inserted).
To zoom in and out on the map with the keypad, press *
and #. To zoom in and out on the map with the keyboard,
press the Shift and backspace keys.
Downloading maps and extra services may involve the
transmission of large amounts of data through your
service provider's network. For more information on data
transmission charges, contact your service provider.
Network positioning
You can use the mobile network to find your current
with GPS, and you cannot use the location as a starting
point for navigation.
To use the mobile network for positioning, select the
network-based positioning method from the device
settings. When you start the Maps application and your
GPS connection is ready, GPS replaces mobile network as
the positioning method.
Display indicators
Select Menu > Applications > GPS > Maps.
The GPS indicator
shows the availability and
strength of the satellite signal. One bar is one satellite.
When the device tries to find a satellite, the bar is yellow.
When the device receives enough data from the satellite
to establish a GPS connection, the bar turns green. The
more green bars, the stronger the GPS connection.
Initially, your device must receive signals from at least four
satellites to calculate the coordinates of your location.
After the initial calculation, signals from three satellites
may be enough.
The data transfer indicator
shows the
Move on a map
internet connection used and the amount of data
transferred since the application started.
Select Menu > Applications > GPS > Maps.
To zoom in to your GPS position or your last known
86
location, select Options > My position.
Example: To find restaurants close to your location,
select Options > Search > Places > Eat &
Drink > Restaurants.
Find locations
Select Menu > Applications > GPS > Maps.
Example: To find a specific hotel, select Options >
Search > Places > Accommodation. Enter the
name of the hotel in the search field, and select
Search all.
To find a location in the city or area displayed on the map,
enter the full or partial address of the location in the search
field, and press the scroll key. To find a location in another
city, enter the city and the full or partial address, such as
London Oxford Street, and press the scroll key. For the
best results, enter the name of the city in the local
language.
Plan a route
Tip: If unsure of the name of the location, enter only
the first characters of the search word. For the best
search results, enter at least three characters.
Select Menu > Applications > GPS > Maps.
To plan a route, select your start point on the map or
search for a location, press the scroll key, and select Add >
Add to route.
To find a specific address, or anaddress in another country,
press the scroll key, and select Search > Addresses.
Country/Region * and City/Post code * are mandatory.
To define the destination and add more locations for your
route, search for the location, and select Options > Add
route point.
Tip: To search for locations in another country using
the search field, enter also the name of the country
in the search field: Rome Italy. Enter the name of
the country in English, or use the three letter ISO-
code (ITA for Italy, GBR for Great Britain, CHN for
China).
To change the order of the locations in the route, select a
location, press the scroll key and select Move. Scroll to the
place where you want to move the location, and select
Select.
To edit the route, press the scroll key, and select Edit
To import a location address from the Contacts
application, press the scroll key, and select Search >
Addresses > Options > Select from Contacts.
route.
To define the settings for the route, select Options >
Settings.
If you search for locations without an internet connection,
the search results are limited to a radius of 50 km (31
miles).
To show the route on the map, select Options > Show
route.
Search by categories
To navigate to the destination by car or on foot, if you have
purchased a licence for these extra services, select
Options > Start driving or Start walking.
The search results are grouped by categories. To limit the
search to one category, select Options > Search >
Places and the category.
87
To save the route, select Options > Save route.
Collections
Save and send locations
To create a collection of your favourite places, such as
restaurants or museums, select Collections > Options >
New collection.
To save a location to your device, press the scroll key, and
select Add > Add to My places. The location is saved in
Favourites > My places.
To add locations to your collection, open My places, select
a location, press the scroll key, and select Add > Add to
collection.
To send a location to a compatible device, press the scroll
key, and select Send. If you send the location in a text
message, the information is converted to plain text.
To view the selected location on the map, press the scroll
key, and select Show on map.
View your saved items
Routes
To view the items you have saved to your device, select
To view the routes you have saved, select Routes.
To open the selected route, select Options > Open.
Options > Favourites.
Places
To view the locations you have saved to your device, select
My places.
Navigate to the destination
To organise the saved locations, select Options > Sort.
Select Menu > Applications > GPS > Maps.
To navigate to your destination, you must purchase a
To view the selected location on the map, press the scroll
licence for the navigation service.
key, and select Show on map.
To purchase a licence for pedestrian and car navigation
with voice guidance, select Drive & Walk. To purchase a
licence for pedestrian navigation only, select Walk. The
licence is region-specific and can be used only in the
selected area. You can pay for the licence through a credit
card or in your phone bill, if supported by your service
provider. You can transfer the licence from your device to
another compatible device, but the licence can only be
used in one device at a time.
To add the location to a route, press the scroll key, and
select Add > Add to route.
History
To check which locations you have searched for on the
map, select History.
To view the selected location on the map, press the scroll
key, and select Show on map.
To send the location to a compatible device, press the
When you use navigation for the first time, you are asked
to select the language of the voice guidance and download
the related voice guidance files. To change the language
scroll key, and select Send.
88
later, in the main view, select Options > Tools >
Settings > Navigation > Voice guidance. Voice
guidance is not available for pedestrian navigation.
To find an alternative route, select Options > Different
route.
To stop navigating, select Stop navigation.
To start navigating, select a location and Drive to or Walk
to.
Drive to your destination
To stop navigating, select Options > Stop navigation.
To purchase a licence for pedestrian and car navigation
with voice guidance, select Options > Extras > Drive &
Walk. The licence is region-specific and can be used only
in the selected area.
Walk to your destination
The walking route ignores any possible limitations to car
navigation, such as one-way streets and turn restrictions, To start navigating by car, scroll to a location, press the
and includes areas such as pedestrian zones and parks. It
also prioritises walkways and smaller roads, and omits
highways and motorways.
scroll key, and select Drive to. When you use car
navigation for the first time, you are asked to select the
language of the voice guidance and download the related
voice guidance files.
The route is drawn to the map, and the arrow indicates
the direction. The dots show in which direction you are
walking.
To switch between different views during the navigation,
press the scroll key, and select Manoeuvre view, Bird's-
eye view, or Arrow view.
The length of a walking route is limited to a maximum of
50 kilometres (31 miles) and the travelling speed to a
maximum of 30 km/h (18 miles/h). If the speed limit is
exceeded, navigation stops and is resumed once the speed
is back within limits.
To find an alternative route, select Options > Diff.
route.
To repeat the voice guidance, select Options > Repeat.
To adjust the volume of the voice guidance, select
There is no voice guidance available for pedestrian
Options > Volume.
navigation.
To view information about traffic events that may affect
To purchase a licence for pedestrian navigation, select
Options > Extras > Walk. The licence is region-specific
and can be used only in the selected area. You can pay for
the licence through a credit card or in your phone bill, if
supported by your service provider.
your travel (extra service), select Options > Traffic info.
To stop navigating, select Stop navigation.
Traffic information
To start navigating, scroll to a location, press the scroll key,
and select Walk to. This service is available when you have
purchased it.
89
Select Menu > Applications > GPS > Maps.
The real-time traffic information service provides
information about traffic events that may affect your
travel. The traffic information service is an extra service
that you can purchase and download into your device, if
available in your country or region.
Select Options > Tools > Settings and from the
following:
•
•
•
•
Internet — Define the internet settings, such as the
default access point to use and whether to be notified
when roaming.
Navigation — Define the navigation settings, such as
voice guidance settings and traffic information
updates.
To purchase a licence for the traffic information service,
select Options > Extras > Traffic info.
To view information about traffic events, select Options >
Traffic info. The events are shown on the map as triangles
and lines.
Route — Define the routing settings, such as the mode
of transportation and the method for calculating the
route.
To view the details of an event, including possible
Map — Define the map settings, such as the map
colours and the measurement system used.
rerouting options, select Options > Open.
To update the traffic information, select Update traffic
info.
Internet settings
Select Menu > Applications > GPS > Maps and
Travel guides
Options > Tools > Settings > Internet.
Select Menu > Applications > GPS > Maps.
To select whether to allow Maps to open an internet
connection when you start the application, select Go
online at start-up.
Travel guides provide information about attractions,
restaurants, hotels, and other points of interest. Some
guides contain videos and audio clips. The guides must be
purchased and downloaded before use.
To select the access point to be used when connecting to
the internet, select Default access point.
To purchase and download travel guides, or to view
downloaded ones, select Options > Extras > Guides.
Select a category and a guide, and select Yes. You can pay
for the guides through a credit card or in your phone bill,
if supported by your service provider.
To select whether to be notified when your device
registers to a network other than your home network,
select Roaming warning.
Navigation settings
Select Menu > Applications > GPS > Maps and
Maps settings
Options > Tools > Settings > Navigation.
90
Select Menu > Applications > GPS > Maps.
To select the language of the voice guidance, select Voice To select the categories of points of interest you want to
guidance. You may need to download the voice files
display on the map, select Categories. For example, to
before you can select the language.
display restaurants, select Restaurants.
To define the backlight setting, select Backlight.
To optimise the colour scheme for day or night usage,
select Colours.
To select how often the information about traffic events
is updated, select Traffic info update.
To select how much of the device memory or space
available on the compatible memory card (if inserted) can
be used to store map data, select Maximum memory
use. When the memory limit is reached, the oldest data is
removed.
To set the device to plan a new route to avoid traffic
events, select Reroute due to traffic.
To select whether to use the metric or imperial system,
Route settings
select System of measurement.
Select Menu > Applications > GPS > Maps and
Options > Tools > Settings > Route.
To select the mode of transportation, select Transport
mode > Walk or Drive. If you select Walk, one-way
streets are regarded as normal streets and walkways can
be used.
Update maps
To update the maps on your device, select Options >
Tools > Settings > Map > Options > Check for map
updates, or use Nokia Map Loader.
To calculate the fastest route, select Route selection >
Faster route. This option is available only if you have
selected Drive as the mode of transportation.
To update the Maps application, go to http://
maps.nokia.com.
To calculate the shortest route, select Route selection >
Shorter route.
Nokia Map Loader
To plan a route that combines the advantages of both the
shortest and the fastest route, select Route selection >
Optimised.
With the Nokia Map Loader application, you can download
maps and voice guidance files from the internet to the
device memory or a compatible memory card. You must
use the Maps application and browse maps at least once
before using Nokia Map Loader, as Nokia Map Loader uses
the Maps information to check which version of the maps
to download.
Map settings
Select Menu > Applications > GPS > Maps and
Options > Tools > Settings > Map.
91
To install Nokia Map Loader to a compatible PC or Mac, go
to http://maps.nokia.com, and follow the instructions on
the screen.
Shortcuts
To change the map type, press 1.
To return to your current location, press 0.
To adjust the map for car navigation during daytime or
night-time, press 3.
To find a different route in car navigation, press 5.
To adjust the volume of voice guidance in car navigation,
press 6.
To add a stopover to the route in car navigation, press 7.
To view information about traffic incidents in car
navigation, press 8.
To check the route information in car navigation, press 9.
To zoom in on the map, press the left shift key.
To zoom out on the map, press the right shift key.
To repeat the voice guidance in car navigation, press 4.
To save the current place in car navigation, press 2.
92
Nokia Office Tools
Nokia Office Tools support mobile business and enable
effective communication with work teams.
•
Insert new — Add new items to the note. You can
record sound and video clips, and capture images.
Send — Send the note.
•
•
Link note to call — Select Add contacts to link a note
to a contact. The note is displayed when making a call
to or receiving a call from the contact.
Active notes
Select Menu > Office > Active notes.
Active notes allows you to create, edit, and view different
kinds of notes, for example, meeting memos, hobby notes,
or shopping lists. You can insert images, videos, and sound
in the notes. You can link notes to other applications, such
as Contacts, and send notes to others.
Settings for Active notes
Select Menu > Office > Active notes and Options >
Settings.
To select where to save notes, select Memory in use and
the desired memory.
Create and edit notes
Select Menu > Office > Active notes.
To create a note, start writing.
To change the layout of active notes, or to view the notes
as a list, select Change view > Grid or List.
To see a note in the background when making or receiving
phone calls, select Show note during call > Yes.
To edit a note, select the note and Options > Editing
Tip: If you temporarily do not want to see notes
during phone calls, select Show note during call >
No. This way you do not have to remove the links
between notes and contact cards.
options.
To add boldface, italics, or underlining to your text or
change the font colour, press and hold the Shift key, and
scroll to select the text. Then select Options > Text.
Select Options and from the following:
Calculator
•
Insert object — Insert images, sound or video clips,
93
business cards, web bookmarks, and files.
Select Menu > Office > Calculator.
This calculator has limited accuracy and is designed for
simple calculations.
To map or delete drives, or to define settings for a
compatible remote drive connected to your device, select
Options > Remote drives.
To make a calculation, enter the first number of the
calculation. Select a function such as add or subtract from
the function map. Enter the second number of the
calculation, and select =. The calculator performs
Find and organise files
operations in the order they are entered. The result of the Select Menu > Office > File mgr..
calculation remains in the editor field and can be used as
To find a file, select Options > Find. Enter a search text
the first number of a new calculation.
that matches the file name.
The device saves the result of the last calculation in its
memory. Exiting the Calculator applicationor switching off
the device does not clear the memory. To recall the last
saved result the next time you open the Calculator
application, select Options > Last result.
To move and copy files and folders, or to create new
folders in the memory, select Options > Organise and
the desired option.
To sort files, select Options > Sort by and the desired
category.
To save the numbers or results of a calculation, select
Shortcut: To select files, press #.
Options > Memory > Save.
To retrieve the results of a calculation from the memory
and use them in a calculation, select Options >
Memory > Recall.
Manage a memory card
Select Menu > Office > File mgr..
File manager
These options are available only if a compatible memory
card is inserted in the device.
Select Menu > Office > File mgr..
Select Options and from the following:
•
•
•
Memory card options — Rename or format a memory
card.
About File manager
Memory card password — Password protect a
memory card.
Select Menu > Office > File mgr..
With File manager, you can browse, manage, and open
Unlock memory card — Unlock a memory card.
files.
The available options may vary.
94
To send files to a compatible device, select Options >
Back up files to a memory card
Send and the sending method.
Select Menu > Office > File mgr..
To back up files to a memory card, select the file types you
want to back up, and Options > Back up phone
memory. Ensure that your memory card has enough free
memory for the files that you have chosen to back up.
Converter
Select Menu > Office > Converter.
The converter has limited accuracy, and rounding errors
may occur.
Quickoffice
Convert measurements
About Quickoffice
Select Menu > Office > Converter.
Select Menu > Office > Quickoffice.
1. Scroll to the type field, and select Options >
Conversion type to open a list of measures. Select the
measurement type to use (other than currency) and
OK.
Quickoffice consists of Quickword for viewing Microsoft
Word documents, Quicksheet for viewing Microsoft Excel
worksheets, Quickpoint for Microsoft PowerPoint
presentations, and Quickmanager for purchasing
software. You can view Microsoft Office 2000, XP, and 2003
documents (DOC, XLS, and PPT file formats) with
Quickoffice. If you have the editor version of Quickoffice,
you can also edit files.
2. Scroll to the first unit field, and select Options >
Select unit. Select the unit from which to convert and
OK. Scroll to the next unit field, and select the unit to
which to convert.
3. Scroll to the first amount field, and enter the value to
convert. The other amount field changes automatically
to show the converted value.
Not all file formats or features are supported.
Work with files
To open a file, scroll to it, and press the scroll key.
Set base currency and
To sort files according to the type, select Options > Sort
exchange rate
by.
Select Menu > Office > Converter.
To view the details of a file, select Options > Details. The
details include the name, size and location of the file, and
the time and date when the file was last modified.
When you change base currency, you must enter new
exchange rates because all previously set exchange rates
are cleared.
95
Before you can make currency conversions, you must
choose a base currency and add exchange rates. The rate
of the base currency is always 1. The base currency
determines the conversion rates of the other currencies.
With PDF reader, you can read PDF documents on the
display of your device; search for text in the documents;
modify settings, such as zoom level and page views; and
send PDF files using e-mail.
1. To set the exchange rate for the unit of currency, scroll
to the type field, and select Options > Currency
rates.
Printing
2. Scroll to the currency type, and enter the exchange rate
You can print documents, such as files, messages, images,
or web pages, from your device. You may not be able to
print all types of documents.
you would like to set per single unit of currency.
3. To change the base currency, scroll to the currency, and
select Options > Set as base currency.
4. Select Done > Yes to save the changes.
File printing
After you have set all the necessary exchange rates, you
can make currency conversions.
Print files
Select Menu > Control panel > Printers.
You can print documents, such as files, messages, or web
pages, from the device, preview a print job, define page
layout options, select a printer, or print to a file. You may
not be able to print all types of documents.
Zip manager
Select Menu > Office > Zip.
With Zip manager, you can create new archive files to store
compressed ZIP formatted files; add single or multiple
compressed files or directories to an archive; set, clear, or
change the archive password for protected archives; and
change settings, such as compression level, and file name
encoding.
Before printing, ensure that all the necessary
configurations have been done to connect your device to
the printer.
To change the printing options, select Options >
Printing options. You can, for example, select a printer or
change the paper size and orientation.
You can save the archive files in the device memory or on
a memory card.
Select Options > Printing options and from the
following:
•
•
Print — Print a document. To print to a file, select Print
PDF reader
to file, and define the location for the file.
Page setup — Change the page layout before printing.
You can change the paper size and orientation, define
96
Select Menu > Office > Adobe PDF.
the margins, and insert a header or a footer. The
maximum length of the header and footer is 128
characters.
•
•
•
•
•
Orientation — Select the orientation.
Paper size — Select the paper size.
Media type — Select the media type.
Colour mode — Select the colour mode.
Printer model — Select the printer model.
•
Preview — Preview a document before you print.
Printing options
The available options may vary.
Open a document, such as a file or message, and select
Options > Printing options > Print.
Image print
Define the following options:
You can print images from your device using a printer
compatible with PictBridge. You can only print images that
are in the JPEG file format.
•
•
Printer — Select an available printer from the list.
Print — Select All pages, Even pages, or Odd pages
as the print range.
•
•
•
Print range — Select All pages in range, Current
page, or Defined pages as the page range.
Number of copies — Select the number of copies to
print.
To print images in Gallery, camera, or image viewer, mark
the images, and select Options > Print.
Connect to printer
Print to file — Select to print to a file and determine
Connect your device to a compatible printer with a
compatible data cable, and select Image transfer as the
USB connection mode.
the location for the file.
The available options may vary.
To set your device to ask the purpose of the connection
each time the cable is connected, select Menu > Control
panel and Connectivity > USB > Ask on connection >
Yes.
Printer settings
Select Menu > Control panel > Printers.
To add a new printer, select Options > Add.
Define the following:
Print preview
•
•
•
•
•
•
•
•
Printer — Enter a name for the printer.
Driver — Select a driver for the printer.
Bearer — Select a bearer for the printer.
Access point — Select the access point.
Port — Select the port.
After you select the printer, the selected images are
displayed using predefined layouts.
If the images do not fit on a single page, scroll up or down
to display the additional pages.
Host — Define the host.
User — Enter the user.
97
Queue — Enter the print queue.
To change the time, date, and clock type settings, select
Image print view
Options > Settings.
After you select the images to print and the printer, define
the printer settings.
To automatically update the time, date, and time zone
information to your device (network service), select
Options > Settings > Automatic time update > On.
Select from the following:
•
•
•
Layout — Select the layout for the images.
Paper size — Select the paper size.
Print quality — Select the print quality.
World clock
Select Menu > Applications > Clock.
To view the time in different locations, open the world
clock tab. To add locations to the list, select Options >
Add location. You can add a maximum of 15 locations to
the list.
To set your current location, scroll to a location, and select
Options > Set as current location. The location is
displayed in the clock main view, and the time in your
device is changed according to the selected location.
Ensure that the time is correct and matches your time
zone.
Clock
Select Menu > Applications > Clock.
In the Clock application, you can view your local time and
time zone information, set and edit alarms, or modify date
and time settings.
Alarm clock
Select Menu > Applications > Clock.
To view your active and inactive alarms, open the alarms
tab. To set a new alarm, select Options > New alarm.
Define the repetition, if needed. When an alarm is active,
is displayed.
Clock settings
Select Options > Settings.
To change the time or date, select Time or Date.
To turn off the sounding alarm, select Stop. To stop the
alarm for a certain time period, select Snooze. If your
device is switched off when an alarm is due, your device
switches itself on and starts sounding the alarm tone.
To change the clock shown on the home screen, select
Clock type > Analogue or Digital.
To allow the mobile phone network to update the time,
Tip: To define the time period after which the alarm date, and time zone information to your device (network
sounds again when you set it to snooze, select
service), select Automatic time update > On.
To change the alarm tone, select Clock alarm tone.
Options > Settings > Alarm snooze time.
98
To cancel an alarm, select Options > Remove alarm.
To send a note to other compatible devices, select
Dictionary
Options > Send.
To synchronise or to define synchronisation settings for a
note, select Options > Synchronisation. Select Start to
initialise synchronisation or Settings to define the
synchronisation settings for the note.
Select Menu > Office > Dictionary.
To translate words from one language to another, enter
text in the search field. As you enter text, suggestions of
words to translate are displayed. To translate a word,
select the word from the list.
Select Options and from the following:
Nokia Wireless
Keyboard
•
•
Listen — Listen to the selected word.
History — Find previously translated words from the
current session.
•
•
Languages — Change the source or target language.
Languages — Download languages from the internet
or remove a language from the dictionary. You cannot
remove the English language from the dictionary. You
can have two additional languages installed, besides
English.
Wireless keyboards are available as separate accessories.
To set up the Nokia Wireless Keyboard or other compatible
wireless keyboard supporting the Bluetooth Human
Interface Devices (HID) profile for use with your device, use
the Wireless keyboard application.
1. Activate Bluetooth connectivity on your device: select
Menu > Connectivity > Bluetooth > Bluetooth >
On. Make sure that you have set My phone's
visibility > Shown to all.
•
Speech — Edit the voice feature settings. You can
adjust the speed and volume of the voice.
2. Switch on the keyboard.
Notes
3. Select Menu > Office > Wlss. keybd..
Select Menu > Applications > Notes.
4. To start searching for devices with Bluetooth
connectivity, select Options > Find keyboard.
You can create and send notes to other compatible
devices, and save received plain text files (TXT file format)
to Notes.
5. Select the keyboard from the list, and press the scroll
key to start the connection.
To write a note, start entering the text. The note editor
6. To pair the keyboard with your device, enter a
passcode of your choice (1 to 9 digits) on the device
and the same passcode on your keyboard.
opens automatically.
To open a note, select Open.
7. If you are asked for a keyboard layout, select it from a 99
list on your device.
When the name of the keyboard appears, its status
changes to Keyboard connected, and the indicator of
your keyboard blinks slowly; the keyboard is ready for use.
For details on the operation and maintenance of your
keyboard, see its user guide.
100
Media
Your device contains a variety of media applications for
both business and leisure time use.
Switch the video light on or off (video mode only)
Select the flash mode (images only).
Activate the self-timer (images only).
Activate sequence mode (images only).
Select a colour effect.
Show or hide the viewfinder grid (images only).
Adjust the white balance.
Adjust the exposure compensation (images only).
Camera
Select Menu > Applications > Media > Camera.
Capture an image
Your device supports an image capture resolution of up to
2048 x 1536 pixels. The image resolution in this guide may
appear different.
The available options vary depending onthe capture mode
and view you are in. The settings return to the default
values when you close the camera.
To capture an image, use the display as a viewfinder, and
press the capture key. The device saves the image in
Gallery.
To customise the camera toolbar, select Options >
Customise toolbar.
To zoom in or out before capturing an image, scroll up or
down. This function is available only when the toolbar is
not shown.
To view the toolbar before and after capturing an image
or recording a video, select Options > Show toolbar.
To view the toolbar only when you need it, select
The toolbar provides you with shortcuts to different items
and settings before and after capturing an image or
recording a video. Scroll to a toolbar item and press the
scroll key.
Options > Hide toolbar.
To activate the toolbar when it is hidden, scroll left. The
toolbar is visible for 5 seconds.
Switch between video mode and image mode.
Select the scene.
101
Scenes
View captured image
A scene helps you to find the right colour and lighting
The image you captured is automatically saved in Gallery.
settings for the current environment. The settings of each If you do not want to keep the image, select Delete from
scene have been set according to a certain style or
the toolbar.
environment.
Select from the following toolbar items:
To change the scene, select Scene modes in the toolbar.
•
•
Send — Send the image to compatible devices.
Send to caller — Send the image to the caller during
an active call.
To make your own scene, scroll to User defined, and select
Options > Change.
•
Post to — Send the image to your compatible online
To copy the settings of another scene, select Based on
album (network service).
scene mode and the desired scene.
To use the image as the background image, select
To activate your own scene, select User defined >
Options > Set as wallpaper.
Select.
To add the image to a contact, select Options > Set as
contact call img. > Assign to contact.
Capture images in a sequence
To capture several images in a sequence, if enough
memory is available, select Sequence mode in the toolbar
and press the capture key.
Record videos
1. If the camera is in the image mode, select the video
mode from the toolbar.
The captured images are shown in a grid on the display.
To view an image, scroll to it and press the scroll key. If
you used a time interval, only the last image is shown on
the display, and the other images are available in Gallery.
2. To start recording, press the capture key.
3. To pause recording at any time, select Pause. Select
Continue to resume recording.
4. To stop recording, select Stop. The video clip is
automatically saved in Gallery. The maximum length of
the video clip depends on the available memory.
To send the image, select Options > Send.
To send the image to a caller during an active call, select
Options > Send to caller.
To switch off the sequence mode, select Sequence
mode > Single shot in the toolbar.
Play a video clip
To play a recorded video clip, select Play from the toolbar.
Select from the following toolbar items:
102
•
•
•
•
Send — Send the video clip to other compatible
devices.
•
Restore camera settings — Restore the camera
settings to the default values.
Send to caller — Send the video clip to the caller
during an active call.
Post to — Send the video to an online album (network
service).
Video settings
To change the video mode settings, select Options >
Delete — Delete the clip.
Settings and from the following:
To enter a new name for the clip, select Options >
•
Video quality — Set the quality of the video clip. Select
Sharing, if you want to send the video clip using a
multimedia message. The clip is recorded with OCIF
resolution, in the 3GPP file format, and the size is
limited to 300 kB (approximately 20 seconds). You may
not be able to send video clips saved in the MPEG-4 file
format in a multimedia message.
Rename video.
Image settings
To change the still image settings, select Options >
Settings and from the following:
•
Record location — To add the location information to
the recorded video clip, if the information is available,
select On.
•
•
Image quality — Set the image quality. The better the
image quality, the more memory the image consumes.
Record location — To add the location information to
the captured image, if the information is available,
select On.
•
•
•
Video stabilisation — To help compensate for the
effects of camera shake, select On.
Audio recording — Select Mute if you do not want to
record sound.
•
Show captured image — To see the image after the
capture, select On. To continue capturing images
immediately, select Off.
Show captured video — View the first frame of the
recorded video clip after the recording stops. To view
the entire video clip , select Play from the toolbar.
Default video name — Define the default name for
recorded video clips.
•
•
Default image name — Define the default name for
the captured images.
•
•
•
Extended digital zoom — The On (continuous)
option allows the zoom increments to be smooth and
continuous between the digital and extended digital
zoom. The Off option allows a limited amount of zoom
while retaining the image resolution.
Memory in use — Choose where to store your video
clips.
Restore camera settings — Restore the camera
settings to the default values.
•
Capture tone — Set the tone that sounds when you
capture an image.
•
•
Memory in use — Choose where to store your images.
Rotate image — Rotate the images.
103
View images
Gallery
Select Menu > Gallery.
Select Menu > Gallery.
To open an image for viewing, select Options > Open.
Use Gallery to access different types of media, including
images, music, and video and sound clips. All viewed
images and videos, and received music and sound clips are
automatically saved to Gallery. Sound clips and music are
played in the Music player, and video clips and streaming
links in the RealPlayer application. Images are opened
with the image viewer.
To open the next or previousimageforviewing, scrollright
or left.
To enlarge the image on the display, select Options >
Zoom in. To reduce the image on the display, select Zoom
out.
To view the image in full screen size, select Options >
Full screen. To return to normal view, select Options >
Normal screen.
Work with media files and
To rotate the image, select Options > Rotate. Select
Right to rotate the image clockwise by 90 degrees, or
select Left to rotate the image anticlockwise by 90
degrees.
folders
Select Menu > Gallery.
To open a file or a folder, select the item.
Shortcut: To rotate the image, press 1.
To create a new folder, scroll to a file, and select Options >
Organise > New folder. You cannot create folders within
folders.
To copy or move files, scroll to a file, and selectOptions >
Manage image files
Organise and the desired option.
To view detailed information about the image, select
To download files into Gallery using the web browser,
select Downl. graphics, Downld. videos, Download
songs, or Downld. sounds. The web browser opens.
Select a bookmark, or enter the web address of the
download site.
Options > View details.
To send the image, select Options > Send, and the
method for sending.
To rename the image, select Options > Rename.
To search for a file, select Options > Find. Write the item
To set the image as the display background, select
you are searching for. Matching files are displayed.
Options > Use image > Set as wallpaper.
Shortcut: To select files, press #.
104
To add the image to a contact, select Options > Use
image > Assign to contact. The Contacts application
opens, and you can select the contact for the image.
2. Allow the device to create a network connection. If you
are prompted for an internet access point, select one
from the list.
3. Sign in to your account as instructed on the service
provider’s website.
Share online
The online sharing service is free of charge, but any data
transferred over the network may incur charges from your
service provider. For the availability and cost of the service,
contact your service provider.
Share online
Select Menu > Applications > Media > Share online.
With Share online, you can post images, video clips, and
sound clips from your device to compatible online sharing
services, such as albums and blogs. You can also view and
send comments to the posts in these services, and
download content to your compatible Nokia device.
Manage your accounts
To view your accounts, select Options > Settings > My
accounts.
To create a new account, select Options > Add new
The supported content types may vary depending on the
account.
service provider.
To change your user name or password for an account,
The availability of the Share online service may vary
depending on your country or sales area.
select the account and Options > Open.
To set the account as the default when sending posts from
your device, select Options > Set as default.
Subscribe to services
To remove an account, select the account and Options >
Select Menu > Applications > Media > Share online.
Delete.
To subscribe to an online sharing service, go to the service
provider's website, and check that your Nokia device is
compatible with the service. Create an account as
Create a post
instructed on the website. You receive a user name and
password needed to set up your device with the account.
Select Menu > Applications > Media > Share online.
To post multimedia files to a service, select a service and
Options > New post. If the online sharing service
provides channels for posting files, select the desired
channel.
1. To activate a service, open the Share online application
in your device, select a service and Options >
Activate.
105
To add an image, video clip, or sound clip to the post, select
Tag list
Options > Insert.
Select Menu > Applications > Media > Share online.
To add a title or description to the post, enter text directly
Tags describe the content of the post, and help viewers
to the fields, if available.
find content in the online sharing services.
To add tags to the post, select Tags:.
To view the list of available tags when creating a post,
To select whether to enable the posting of location
select Tags:.
information contained in the file, select Location:.
To add tags to your post, select a tag from the list and
Done. To add several tags to the post, select each tag and
Options > Mark/Unmark > Mark.
To set the level of privacy for a file, select Privacy:. To allow
everyone to view your file, select Public. To restrict others
from seeing your files, select Private. You can define the
Default setting on the service provider's website.
To search for tags, enter the search text in the search field.
To add a tag to the tag list, select Options > New tag.
To send the post to the service, select Options > Post to
web.
Manage posts in Outbox
Post files from Gallery
Select Menu > Applications > Media > Share online.
You can post files from Gallery to an online sharing service.
1. Open Gallery, and select the files you want to post.
Outbox shows the posts you are currently uploading, posts
that have failed to upload, and the posts you have sent.
To open Outbox, select Outbox > Options > Open.
2. Select Options > Send > Post to web and the
desired account.
To start uploading a post, select the post and Options >
3. Edit your post as required.
Upload now.
4. Select Options > Post to web.
To cancel uploading a post, select the post and Options >
Cancel.
To delete a post, select the post and Options > Delete.
One-click upload
One-click upload lets you post images to an online sharing
service immediately after capturing them.
View service content
To use one-click upload, capture an image with your
device camera, and select the online sharing icon from the
toolbar.
Select Menu > Applications > Media > Share online.
106
To view the content of a service, select the service and
To change the user name for the account, select User
Options > Open.
name.
To open a feed, select the feed. To open the feed in the
browser, select Options and the service provider's
website.
To change the password for an account, select
Password.
To change the account name, select Account name.
To view comments related to a file, select the file and
To determine the size for images that you post, select
Select image size > Original, Medium (1024 x 768
pixels), or Small (640 x 480 pixels).
Options > View comments.
To view a file in full screen, select the file.
To update a feed, select the feed and Options > Update
now.
Edit advanced settings
If you see an interesting file and want to download the
entire feed to your device, select the file and Options >
Subscribe to contact.
Select Menu > Applications > Media > Share online.
To edit the advanced settings, select Options >
Settings > Advanced.
To only use WLAN for sending posts, select Use cellular >
Service provider settings
Disabled. To also use the internet through the mobile
Select Menu > Applications > Media > Share online. network, select Enabled.
To view the list of service providers, select Options >
To allow sending and downloading posts while outside
Settings > Service providers.
your home network, select Allow roaming > Enabled.
To check the details of a service, select the service from the To download new items from the service automatically,
list.
select Download interval and the interval for the
downloads. To download items manually, select Manual.
To delete the selected service, select Options > Delete.
To select whether to receive notifications in the home
screen when new files or comments are posted to your
online sharing accounts, select Show in Home screen.
Edit account settings
Select Menu > Applications > Media > Share online.
To edit your accounts, select Options > Settings > My
Data counters
accounts. Select an account and Edit.
Select Menu > Applications > Media > Share online.
107
To check the amount of data you have uploaded and
downloaded, select Options > Settings > Data
transferred.
2. To connect to a service to install video services, select
Video directory and the desired video servicefrom the
service catalogue.
View a video clip
To reset the counters, select Options > Clear sent, Clear
received, or Clear all.
To browse the content of installed video services, select
Video feeds.
The content of some video services is divided into
Nokia Video Centre
categories. To browse video clips, select a category.
With Nokia Video Centre (network service), you can
download and stream video clips over the air from
compatible internet video services using a packet data or
wireless LAN (WLAN) connection. You can also transfer
video clips from a compatible PC to your device and view
them in Video centre.
To search for a video clip in the service, select Video
search. Search may not be available in all services.
Some video clips can be streamed over the air, but others
must be first downloaded to your device. To download a
video clip, select Options > Download. Downloads
continue in the background if you exit the application. The
downloaded video clips are saved in My videos.
Using packet data access points to download videos may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
To stream a video clip or view a downloaded one, select
Options > Play. When the video clip is playing, use the
selection keys and the scroll key to control the player. To
adjust the volume, use the volume key.
Your device may have predefined services.
Service providers may provide free content or charge a fee.
Check the pricing in the service or from the service
provider.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing.
View and download video
Select Options and from the following:
•
Resume download — Resume a paused or failed
download.
clips
Connect to video services
•
•
•
•
Cancel download — Cancel a download.
Preview — Preview a video clip.
1. Select Menu > Applications > Media > Video
Feed details — View information about a video clip.
Refresh list — Refresh the list of video clips.
centre.
108
•
Open link in browser — Open a link in the web
To view the videos available in a feed, select a feed from
the list.
browser.
Schedule downloads
Setting the application to download video clips
My videos
automatically may involve the transmission of large
amounts of data through your service provider's network.
For information about data transmission charges, contact
your service provider. To schedule an automatic download
for video clips in a service, select Options > Schedule
downloads. Video centre automatically downloads new
video clips daily at the time you define.
My videos is a storage place for all videos in the Video
centre application. You can list downloaded videos and
video clips recorded with the device camera in separate
views.
1. To open a folder and view video clips, use the scroll key.
To control the video player when the video clip is
playing, use the scroll key and the selection keys.
To cancel scheduled downloads, select Manual
2. To adjust the volume, press the volume key.
download as the download method.
Select Options and from the following:
•
Resume download — Resume a paused or failed
Video feeds
download.
Select Menu > Applications > Media > Video centre.
•
•
•
Cancel download — Cancel a download.
Video details — View information about a video clip.
Find — Find a video clip. Enter a search text that
matches the file name.
The content of the installed video services is distributed
using RSS feeds. To view and manage your feeds, select
Video feeds.
•
Memory status — View the amount of free and used
memory.
Select Options and from the following:
•
Feed subscriptions — Check your current feed
•
•
Sort by — Sort video clips. Select the desired category.
Move and copy — Move or copy video clips. Select
Copy or Move and the desired location.
subscriptions.
•
•
Feed details — View information about a video.
Add feed — Subscribe to new feeds. Select Via Video
directory to select a feed from the services in the video
directory.
Transfer videos from your PC
•
•
Refresh feeds — Refresh the content of all feeds.
Manage account — Manage your account options for
a particular feed, if available.
Transfer your own video clips to Video centre from
compatible devices using a compatible USB data cable.
Video centre will display only the video clips which are in
a format supported by your device.
•
Move — Move video clips to a desired location.
109
1. To view your device on a PC as a mass memory device
where you can transfer any data files, make the
connection with a USB data cable.
on-demand services, videos which have the same or a
higher age limit than you have set, are hidden.
Preferred memory — Select whether downloaded
videos are saved in the device memory or on a
compatible memory card.
•
•
2. Select Mass storage as the connection mode. A
compatible memory card needs to be inserted in the
device.
Thumbnails — Select whether to download and view
thumbnail images in video feeds.
3. Select the video clips you want to copy from your PC.
4. Transfer the video clips to E:\My Videos in the memory
card.
Nokia Podcasting
The transferred video clips appear in the My videos
folder in Video centre. Video files in other folders of
your device are not displayed.
Select Menu > Applications > Media > Podcasting.
Download podcasts to your device, and play them.
Video centre settings
Play and manage podcasts
In the Video centre main view, select Options >
Podcasting delivers audio or video content over the
internet for playback on mobile devices and PCs.
Settings and from the following:
•
Video service selection — Select the video services
that you want to appear in Video centre. You can also
add, remove, edit, and view the details of a video
service. You cannot edit preinstalled video services.
Connection settings — To define the network
destination used for the network connection, select
Network connection. To select the connection
manually each time Video centre opens a network
connection, select Always ask.
With the Nokia Podcasting application, you can search,
discover, subscribe, and download podcasts over the air;
and play, manage, and share podcasts with your device.
Define the connection and downloading settings before
using the application. Select Options > Settings >
Connection and Download.
•
To search for new podcast episodes to subscribe to, select
Directories.
To set GPRS connection on or off, select Allow GPRS
To search for podcasts using keywords and podcast show
usage.
titles, select Search.
To set roaming on or off, select Allow roaming.
Parental control — Set an age limit to videos. The
required password is the same as the device lock code.
The factory setting for the lock code is 12345. In video-
To display the available episodes from the selected
•
podcast, open the Podcasts folder and select Open.
110
To download the selected episode, select Download.
To play the downloaded episode, select Play.
Search podcasts
To update the selected podcast or marked podcasts, for a
Search helps you find podcasts by keyword or title.
new episode, select Options > Update.
The search engine uses the podcast search service you set
up in Podcasting > Options > Settings >
Connection > Search service URL.
To open the web site of the podcast (network service),
select Options > Open web page.
Some podcasts provide the opportunity to interact with
the creators by commenting and voting. To connect to the
internet to do this, select Options > View comments.
To search for podcasts, select Search, and enter the
desired keywords.
Tip: Search looks for podcast titles and keywords in
descriptions, not specific episodes. General topics,
such as football or hip-hop, usually give better
results than a specific team or artist.
Directories
Select Directories.
To subscribe to selected channels and add them to your
Directories help you find new podcast episodes to which
podcasts, select Subscribe.
to subscribe.
To start a new search, select Options > New search.
Contents of the directories change. Select the desired
directory folder to update it (network service). The colour
of the folder changes, when the update is complete.
To see the details of a podcast, select Options >
Description.
To subscribe to a podcast, scroll to the podcast title and
select Update. After you have subscribed to episodes of a
podcast, you can download, manage, and play them in the
podcasts menu.
Podcasting settings
To edit the connection settings, select Options >
Settings > Connection.
To add a new directory or folder, select Options > New >
Web directory or Folder. Select a title, URL of the .opml
(outline processor markup language) file, and Done.
To edit the download settings, select Options >
Settings > Download.
To restore the default settings, open the corresponding
To import an .opml file stored on your device, select
settings and select Options > Restore default.
Options > Import OPML file.
To save a received .opml file, open the file to save the file
into the Received folder in Directories. Open the folder to
subscribe to any of the links to add to your podcasts.
111
To fast-forward or rewind, press and hold the scroll key to
the right or left.
Music player
To skip to the next item, scroll right. To return to the
beginning of the item, scroll left. To skip to the previous
item, scroll left again within 2 seconds after a song or
podcast has started.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
To modify the tone of the music playback, select
Options > Equaliser.
Select Menu > Applications > Media > Music player.
To modify the balance and stereo image, or to enhance
bass, select Options > Audio settings.
Music player supports files formats such as AAC, AAC+, eAAC
+, MP3, and WMA. Music player does not necessarily
support all features of a file format or all the variations of
file formats.
To view a visualisation during playback, select Options >
Show visualisation.
To return to the home screen and leave the player playing
You can also use Music player to listen to podcast episodes.
Podcasting is a method for delivering audio or video
content over the internet using either RSS or Atom
technologies for playback on mobile devices and PCs.
in the background, press the end key.
Playlists
To view and manage playlists, select Music > Playlists.
To create a new playlist, select Options > Create
playlist.
Play a song or a podcast
episode
To add songs to the playlist, select the song and Options >
Add to playlist > Saved playlist or New playlist.
To reorder songs in a playlist, scroll to the song you want
To add all available songs and podcasts to the music
to move, and select Options > Reorder list.
library, select Options > Refresh library.
To play a song or a podcast episode, select the desired
category, and the song or podcast episode.
Nokia Music Store
To pause playback, press the scroll key; to resume, press
the scroll key again. To stop playback, scroll down.
Select Menu > Applications > Media > Music store.
In the Nokia Music Store (network service) you can search,
112
browse, and purchase music to download to your device.
To purchase music, you first need to register for the
service.
Manual synchronisation
With manual synchronisation, you can select the songs
To access the Nokia Music Store, you must have a valid
and playlists that you want to move, copy, or remove.
internet access point defined in the device.
1. After your device is connected with Windows Media
Player, select your device in the navigation pane on the
right, if more than one device is connected.
Nokia Music Store is not available for all countries or
regions.
To find more music in the different categories, select
2. In the left navigation pane, browse the music files on
Options > Find in Nokia Music store.
your PC which you want to synchronise.
3. Drag and drop songs to the Sync List on the right.
To select the access point to use with the Nokia Music
Store, select Default access point.
You can see the amount of available memory in your
device above the Sync List.
4. To remove songs or albums, select an item in the Sync
Transfer music from PC
List, right-click, and select Remove from list.
To transfer music from your PC, connect your device to the
PC with a compatible USB data cable or Bluetooth
connectivity. If you are using the USB cable, select Mass
storage as the connection mode. Make sure that a
compatible memory card is inserted in the device.
5. To start the synchronisation, click Start Sync.
Automatic synchronisation
1. To activate the automatic synchronisation function in
Windows Media Player, click the Sync tab, select Nokia
Handset > Set Up Sync..., and check the Sync this
device automatically check box.
If you selectMedia transfer as the connection mode, you
can use Windows Media Player to synchronise music
between your device and PC.
2. Select the playlists you want to synchronise
automatically in the Available playlists pane, and
click Add.
Transfer with Windows Media
Player
The selected items are transferred to the Playlists to
sync pane.
3. To finalise the setup for automatic synchronisation,
Music synchronisation functions may vary between
different versions of the Windows Media Player
application. For more information, see the corresponding
Windows Media Player guides and help. The following
instructions are for Windows Media Player 11.
click Finish.
When the Sync this device automatically check box is
checked and you connect your device to the PC, the music
library in your device is automatically updated based on
the playlists you select for synchronisation in Windows
113
Media Player. If no playlists have been selected, the whole compatible computer, or streamed to your device over the
PC music library is selected for synchronisation. If there is web. Supported file formats include MPEG-4, MP4 (not
not enough free memory in your device, Windows Media
streaming), 3GP, RV, RA, AMR, and Midi. RealPlayer does not
necessarily support all variations of a media file format.
Player selects manual synchronisation automatically.
To stop automatic synchronisation, click the Sync tab, and
select Stop Sync to 'Nokia Handset'.
Play video clips and stream
links
Preset frequency settings
Select Menu > Applications > Media > Music player
and Options > Go to Now playing > Options >
Equaliser.
Warning: Do not hold the device near your ear when
the loudspeaker is in use, because the volume may be
extremely loud.
To use a preset frequency setting when playing music,
select the frequency setting you want to use and
Options > Activate.
To play a video clip, select Video clips, and a clip.
To list recently played files, in the application main view,
select Recently played.
To modify the frequency of a preset setting, select
Options > Edit and a frequency band, and scroll up or
down to adjust its value. You hear your frequency
adjustment immediately in the playback.
To stream content over the air (network service), select
Streaming links and a link. RealPlayer recognises two
kinds of links: an rtsp:// URL and an http:// URL that points
to a RAM file. Before the content begins streaming, your
device must connect to a website and buffer the content.
If a network connection problem causes a playback error,
RealPlayer attempts automatically to reconnect to the
internet access point.
To reset the frequency bands to their original values, select
Options > Reset to defaults.
To create your own frequency setting, select Options >
New preset. Enter a name for the frequency setting. Scroll
up or down to move between the frequency bands, and
set the frequency for each band.
To download video clips from the web, select Download
videos.
To adjust the volume during playback, use the volume
keys.
RealPlayer
To fast-forward during playback, scroll up and hold. To
rewind during play, scroll down and hold.
Select Menu > Applications > Media > RealPlayer.
RealPlayer plays video and sound clips that are stored on
your device, transferred from an e-mail message, or a
114
To stop the playback or streaming, select Stop. Buffering
The recorder cannot be used when a data call or GPRS
or the connection to the streaming site stops, the playback connection is active.
of the clip stops, and the clip rewinds to the beginning.
To record a sound clip, select
To stop recording a sound clip, select
.
To view the video clip in full-screen mode, select
Options > Play in full screen. Full screen mode increases
the size of the video to cover the maximum video area
possible while maintaining the aspect ratio.
.
To listen to the sound clip, select
.
To select the recording quality or where you want to save
your sound clips, select Options > Settings.
View information about a
media clip
Recorded sound clips are saved in the Sound clips folder in
Gallery.
To record a telephone conversation, open recorder during
a voice call, and select . Both parties hear a tone every
5 seconds during recording.
To view the properties of a video or sound clip, or web link,
select Options > Clip details. Information may include
for example the bit rate or the internet link of a streaming
file.
Flash player
RealPlayer settings
With Flash player, you can view, play, and interact with
flash files made for mobile devices.
Select Menu > Applications > Media > RealPlayer.
You may receive RealPlayer settings in a message from
To open Flash player and play a flash file, select the file.
your service provider.
To send a flash file to compatible devices, select Options >
Send. Copyright protection may prevent the sending of
some flash files.
To define the settings manually, select Options >
Settings > Video or Streaming.
To switch between flash files saved in the device memory
or on the memory card, scroll to the corresponding tabs.
Recorder
To change the flash file quality, select Options >
Quality when you are playing the flash file. If you select
High, the playback of some flash files may appear uneven
and slow due to their original settings. Change the quality
setting of such files to Normal or Low for improved
playback.
Select Menu > Applications > Media > Recorder.
With the Recorder application, you can record voice
memos and telephone conversations.
115
To organise your flash files, select Options > Organise.
You can make a call or answer an incoming call while
listening to the radio. The radio is muted when there is an
active call.
FM radio
To start a station search, select
or
.
If you have saved radio stations in your device, to go to
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
accessory needs to be attached to the device for the FM
radio to function properly.
the next or previous saved station, select
or
.
Select Options and from the following:
•
Activate loudspeaker — Listen to the radio using the
Select Menu > Applications > Media > Radio > FM
loudspeaker.
radio.
•
•
Manual tuning — Change the frequency manually.
Station directory — View available stations based on
location (network service).
The quality of the radio broadcast depends on the
coverage of the radio station in that particular area.
•
Save station — Save the station to which you are
currently tuned to your station list.
Listen to the radio
•
•
Stations — Open the list of your saved stations.
Play in background — Return to the home screen
while listening to the FM radio in the background.
Select Menu > Applications > Media > Radio > FM
radio.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
accessory needs to be attached to the device for the FM
radio to function properly.
Saved stations
Select Menu > Applications > Media > Radio > FM
radio.
To open the list of your saved stations, select Options >
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Stations.
To listen to a saved station, select Options > Station >
Listen.
To change station details, select Options > Station >
The quality of the radio broadcast depends on the
Edit.
coverage of the radio station in that particular area.
116
FM radio settings
Listen to internet radio
stations
Select Menu > Applications > Media > Radio > FM
radio.
Select Menu > Applications > Media > Radio >
To automatically search for alternative frequencies if the
reception is weak, select Options > Settings >
Alternative frequencies > Auto scan on.
To select the region where you currently are, select
Options > Settings > Current region. This setting is
displayed only if there is no network coverage when you
start the application.
Internet radio.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
To listen to a radio station on the internet, do the
following:
Nokia Internet Radio
1. Select a station from your favourites or the station
directory, or search for stations by name from the
Nokia Internet Radio service.
Select Menu > Applications > Media > Radio >
Internet radio.
With the Nokia Internet Radio application (network
service), you can listen to available radio stations on the
internet. To listen to radio stations, you must have a
wireless LAN (WLAN) or packet data access point defined
in your device. Listening to the stations may involve the
transmission of large amounts of data through your
service provider's network. The recommended connection
method is WLAN. Check with your service provider for
terms and data service fees before using other
To add a station manually, select Options > Add
station manually. You can also browse for station
links with the Web browserapplication. Compatible
links are automatically opened in the Internet Radio
application.
2. Select Listen.
The Now playing view opens, displaying information
about the currently playing station and song.
connections. For example, a flat rate data plan can allow
large data transfers for a set monthly fee.
To pause the playback, press the scroll key; to resume,
press the scroll key again.
To view station information, select Options > Station
information (not available if you have saved the station
manually).
117
If you are listening to a station saved in your favourites,
scroll left or right to listen to the previous or next saved
station.
2. Enter a station name or the first letters of the name in
the search field, and select Search.
Matching stations are displayed.
To listen to a station, select the station and Listen.
Favourite stations
To save a station to your favourites, select the station and
Options > Add to Favourites.
Select Menu > Applications > Media > Radio >
Internet radio.
To make another search, select Options > Search
again.
To view and listen to your favourite stations, select
Favourites.
To add a station manually to favourites, select Options >
Add station manually. Enter the web address of the
station and a name that you want to appear in the
favourites list.
Station directory
Select Menu > Applications > Media > Radio >
Internet radio and Station directory.
The station directory is maintained by Nokia. If you want
to listen to internet radio stations outside the directory,
add station information manually or browse for station
links on the internet with the Web browser application.
To add the currently playing station to favourites, select
Options > Add to Favourites.
To view station information, to move a station up or down
in the list, or to delete a station from favourites, select
Options > Station and the desired option.
Select from the following:
•
•
•
•
Browse by genre — View the available radio station
To view only stations beginning with particular letters or
numbers, start entering the characters. Matching stations
are displayed.
genres.
Browse by language — View the languages in which
there are stations broadcasting.
Browse by country/region — View the countries in
which there are stations broadcasting.
Top stations — View the most popular stations in the
directory.
Search for stations
Select Menu > Applications > Media > Radio >
Internet radio.
To search for radio stations in the Nokia Internet Radio
Internet radio settings
service by name, do the following:
Select Menu > Applications > Media > Radio >
1. Select Search.
118
Internet radio and Options > Settings.
To select the default access point to connect to the
network, select Default access point and from the
available options. If you want the device to ask you to
select the access point every time you open the
application, select Always ask.
To use N-Gage, you need a GPRS or 3G connection. You can
also use WLAN if available. You also need the connection
to access online features such as downloading games,
game licenses, multiplayer gaming, or chat. You also need
the connection to participate in online or multiplayer
games, or to send messages to other players.
To change the connection speeds for different connection
types, select from the following:
All N-Gage services, where connection to N-Gage servers is
required, such as game file downloading, game purchase,
online games, multiplayer gaming, creating a player
name, chat, and messaging, involve transmission of large
amounts of data.
•
GPRS connection bitrate — GPRS packet data
connections
•
•
3G connection bitrate — 3G packet data connections
Wi-Fi connection bitrate — WLAN connections
Your service provider will charge for data transfer. For
more information about data transfer plans, contact your
The quality of the radio broadcast depends on the selected
connection speed. The higher the speed, the better the
quality. To avoid buffering, use the highest quality only
with high speed connections.
N-Gage views
Home opens when you start the N-Gage application.
You can start playing or resume the game you played last,
check your current N-Gage points, find more games, read
your messages, or connect with an N-Gage friend who is
available to play.
The N-Gage application consists of five different parts.
N-Gage
N-Gage is a mobile gaming platform available for a range
of compatible Nokia mobile devices. You can access N-
Gage games, players, and content through the N-Gage
application on your device. You can also download games
and access some features on your computer at www.n-
gage.com.
About N-Gage
In My games, you can play and manage games you
have downloaded to your device. You can install and
delete games, rate and review games you have played,
and recommend them to your N-Gage friends.
With N-Gage, you can download and buy games, and play
them by yourself or with friends. You can download game
trials to try out new games, and buy the ones you like. N-
Gage also provides a way to keep in touch with other
players, and to track and share your scores and other
gaming achievements.
In My profile, you can manage your profile information
and details, and keep a record of your N-Gage gaming
history.
In My friends, you can invite other N-Gage players to
119
your friends list, and see if they are online and available
to play. You can also send messages to your N-Gage
friends.
In Showroom, you can find information about N-Gage
games, including screenshots and player reviews. You can
also try out new games by downloading game trials, or
enhance your gaming experience with game extras for
games already on your device.
Register.
You can also create your player name on the N-Gage
website at www.n-gage.com.
When you have created a player name, edit your settings
and personal information in the private tab in My profile.
Data transfer charges may apply for player name creation
on your device.
CGreeattsetaaprtlaeyder name
Start a game
To start playing the game you last played, go to Home, and
You can download, purchase, and play games without a
player name, but creating one is recommended. A player
name enables youto participate inthe N-Gage community,
connect with other players, and share your gaming
achievements, recommendations, and reviews. You also
need a player name to transfer your profile details and N-
Gage points to another device.
select Start Game.
To resume a paused game, select Options > Resume
Game.
Track your progress
To view your currentN-Gagepoints, go to Home, and select
When you start the N-Gage application and connect to the
N-Gage service for the first time, you are prompted to
create an N-Gage player name. You can connect to the
network, for example, by setting your availability by
selecting Options > Set Availability > Available to
Play.
Track My Progress.
Play with friends
To connect with N-Gage players on your friends list and to
invite them to a game, select Play With Friends. N-Gage
suggests a friend to play with based on your previous
gaming history and the availability of your N-Gage friends.
If you already have an N-Gage player name, select I have
an account, and enter your user name and password to log
To find a different friend to play with, select Options >
in.
View My Friends.
To create a new player name:
1. Select Register New Account.
This item is not displayed if your friends list is empty. See
"Connect with other players", p. 121.
2. Enter your date of birth, desired player name, and
password. If the player name is already in use, N-Gage
suggests a list of available similar names.
120
Play and manage games
Edit profile details
To play and manage the games downloaded and installed To edit your public profile details, select Options > Edit
on your device, select My Games. The games are sorted by Profile, open the public tab, and select from the following:
the last-played date with the most recent first.
•
Icon — Add an image to represent you. When you
change the icon, N-Gage shows a list of all the images
in your device Gallery that can be used as the icon. Select
the image you want from the list, or use the search to
find it.
There are five possible types of games in My games:
•
Full games — These are games you have purchased
with a full licence. There may be several licence types
available, depending on the game and your region.
Trial games — These are full game files to which you
have access only for a limited time or which have
limited content. When the trial expires, you must
purchase a licence to unlock the full game and continue.
These games are marked with a trail banner.
•
•
•
•
Motto — Add a short personal message. To edit the
text, select Change.
•
Favorite Game(s) — Enter the names of your favourite
games.
Device Model — The model number of your device.
This is defined automatically and cannot be edited.
Show Location — Select whether to display your city
and country in your public profile. You can change your
location in the private tab.
•
•
•
Demo games — These are smaller sections of the game
with only a very limited set of features and levels. These
games are marked with a demo banner.
Full expired — These are games that you have
purchased with a limited licence, which is now expired.
These games are marked with a clock and an arrow.
Not available — These are full games which you have
removed, or which you have downloaded but the
installation was not completed. These games are
shown as unavailable in the games list. Also, games
installed on the memory card are shown as unavailable
when the memory card has been removed.
After you update your profile, log in to the service with
your player name to ensure that the changes you made to
your profile are synchronised with the N-Gage server.
Connect with other players
To connect with other N-Gage players and to manage your
Friends list, go to My friends. You can search for a particular
N-Gage player, invite them to your Friends list, and then
see which of your friends are online and available to play.
You can also send and receive private messages and game
recommendations.
If a game extra has been downloaded but not fully
installed, the respective game graphic is also unavailable
and the game cannot be played until the game extra has
been installed.
121
Find and add friends
Send messages
To invite an N-Gage player to your friends list, enter the
In My friends, you can send private messages to players in
your friends list. If your friend is currently logged in to the
player's player name to the Add a Friend field in the
friends list. Add a message to the invitation, if needed. To N-Gage service, the friend can respond to your message,
send the invitation, select Send. If the player accepts the
and you can chat one-on-one.
invitation, the player appears on your friends list.
To view new messages received from an N-Gage friend,
scroll to the friend on your friends list, and select
Options > View Message. Read messages are deleted
automatically when you exit N-Gage.
If you do not have any N-Gage friends and want to meet
other players, go to N-Gage Arena at www.n-gage.com,
and visit the chatrooms and forums.
To view game recommendations, select Options > View
Recommendation. Game recommendations are deleted
automatically a week after you receive them.
View friend information
To view information about a friend, such as the friend's
and connected to the N-Gage service to see the current
online status of your friends.
To send a message to an N-Gage friend, scroll to the friend
on your friends list, and select Options > Send
Message. The maximum size of a private message is 115
characters. To send the message, select Submit.
The indicator next to the player name shows the friend’s
You need a GPRS, 3G, or wireless LAN connection to be able
to use the messaging feature. Data transfer charges may
apply. For more information, contact your mobile service
provider.
availability.
You can send private messages to your N-Gage friends
even if you are unavailable or offline.
Sort the friends list
points, select Options > Sort Friends By.
To sort your friends by availability, player name, or N-Gage
N-Gage settings
To change your N-Gage settings, select Options > Edit
Profile, open the private tab, and select Options > N-
Gage Settings.
Rate a player
To rate a player, scroll to the player on your friends list,
and select Options > Rate Player. You can give a player
a rating from one to five stars. The rating you give affects
the player’s reputation in the community.
Select from the following:
•
Player Name — Edit you player name. You can only
edit the name if you have not logged in to the N-Gage
service yet.
122
•
•
•
Personal Settings — Define your personal details,
which are not shown in your public profile, and
subscribe to the N-Gage newsletter. Define also
whether you want to receive notifications from your N-
Gage friends while you are playing games.
Connection Settings — Select whether to allow the
N-Gage application to connect to the network
automatically when needed, and define your preferred
access point and the data transfer limit that triggers an
alert.
Account Details — Select your purchase preferences.
When you purchase a game, you are asked if you want
to save your billing details, including your credit card
number, for faster purchasing in the future.
123
Connectivity
Your device offers several options to connect to the
internet, a corporate intranet, or to another device or
computer.
Data cable
To avoid damaging the data, do not remove the data cable
in the middle of a data transfer.
Transfer data between your device and a PC
Fast downloading
1. Insert a memory card to your device, and connect the
High-speed downlink packet access (HSDPA, also called
device to a compatible PC with the USB data cable.
3.5G, indicated by
) is a network service in UMTS
2. When the device asks which mode is used, select Mass
storage. In this mode, you can see your device as a
removable hard drive in your computer.
networks and provides high-speed data downloads. When
HSDPA support in the device is activated and the device is
connected to a UMTS network that supports HSDPA,
downloading data such as messages, e-mail, and browser
pages through the cellular network may be faster. An
active HSDPA connection is indicated by . The icon may
vary between regions.
3. End the connection from the computer (for example,
from an Unplug or Eject Hardware wizard in Windows)
to avoid damaging the memory card.
To use Nokia PC Suite with your device, install Nokia PC
Suite on your PC, connect the data cable, and select PC
Suite.
To turn HSDPA on or off, select Menu > Control panel >
Settings and Connection > Packet data > High speed
packet access. Some cellular networks do not allow
incoming voice calls when HSDPA is active, in which case
you need to deactivate HSDPA to receive calls. For more
information, contact your service provider.
To use your device to connect your PC to the web, connect
the data cable, and select Connect PC to web.
To synchronise the music in your device with Nokia Music
Player, install the Nokia Music Player software on your PC,
connect the data cable, and select Media transfer.
For availability and subscription to data connection
services, contact your service provider.
To change the USB mode you normally use with the data
cable, select Menu > Control panel > Connectivity >
USB and USB connection mode, and the desired option.
HSDPA only affects the download speed; sending data to
the network, such as messages and e-mail, is not affected.
124
To set the device to ask for the mode each time you
connect the USB data cable to the device, select Menu >
Control panel > Connectivity > USB and Ask on
connection > Yes.
Basic Printing, Device ID, Dial-up Networking, File Transfer,
Generic Audio/Video Distribution, Generic Access, Generic
Object Exchange, Handsfree, Human Interface Device,
Headset, Object Push, Phone Book Access, Serial Port, and
SIM Access. To ensure interoperability between other
devices supporting Bluetooth technology, use Nokia
approved accessories for this model. Check with the
manufacturers of other devices to determine their
compatibility with this device.
Bluetooth
Select Menu > Control panel > Connectivity >
Bluetooth.
Features using Bluetooth technology increase the demand
on battery power and reduce the battery life.
About Bluetooth
Send and receive data with
Bluetooth
Bluetooth technology enables wireless connections
between electronic devices within a range of 10 metres
(33 feet). A Bluetooth connection can be used to send
images, videos, text, business cards, calendar notes, or to
connect wirelessly to devices that use Bluetooth
technology.
Select Menu > Control panel > Connectivity >
Bluetooth.
1. When you activate Bluetooth connectivity for the first
time, you are asked to give a name to your device. Give
your device a unique name to make it easy to recognise
if there are several Bluetooth devices nearby.
Since devices using Bluetooth technology communicate
using radio waves, your device and the other devices do
not need to be in direct line-of-sight. The two devices only
need to be within a maximum of 10 metres of each other,
although the connection can be subject to interference
from obstructions such as walls or other electronic
devices.
2. Select Bluetooth > On.
3. Select My phone's visibility > Shown to all or
Define period. If you select Define period, you need
to define the time during which your device is visible
to others. Your device and the name you entered can
now be seen by other users with devices using
Bluetooth technology.
Several Bluetooth connections can be active at a time. For
example, if your device is connected to a headset, you can
also transfer files to another compatible device at the
same time.
4. Open the application where the item you want to send
This device is compliant with Bluetooth Specification 2.0
+ EDR supporting the following profiles: Advanced Audio
Distribution, Audio/Video Remote Control, Basic Imaging,
is stored.
125
5. Select the item and Options > Send > Via
Bluetooth. The device searches for other devices using
Bluetooth technology within range and lists them.
Pair devices
Select Menu > Control panel > Connectivity >
Bluetooth.
Tip: If you have sent data using Bluetooth
connectivity before, a list of the previous search
results is displayed. To search for more
Bluetooth devices, select More devices.
Open the paired devices tab.
Before pairing, decide on your own passcode (1-16 digits),
and agree with the user of the other device to use the same
code. Devices that do not have a user interface have a fixed
passcode. You need the passcode only when you connect
the devices for the first time. After pairing, it is possible to
authorise the connection. Pairing and authorising the
connection makes connecting quicker and easier, as you
do not have to accept the connection between paired
devices every time you establish a connection.
6. Select the device with which you want to connect. If
the other device requires pairing before data can be
transmitted, you are asked to enter a passcode.
When the connection has been established, Sending
data is displayed.
The Sent folder in the Messaging application does not
store messages sent using Bluetooth connectivity.
The passcode for remote SIM access must have 16 digits.
To receive data using Bluetooth connectivity, select
Bluetooth > On and My phone's visibility > Shown to
all to receive data from a non-paired device or Hidden to
receive data from a paired device only. When you receive
data through Bluetooth connectivity, depending on the
settings of an active profile, a tone sounds, and you are
asked if you want to accept the message in which the data
is included. If you accept, the message is placed in the
Inbox folder in the Messaging application.
1. Select Options > New paired device. The device
starts to search for Bluetooth devices within range. If
you have sent data using Bluetooth connectivity
before, a list of the previous search results is displayed.
To search for more Bluetooth devices, select More
devices.
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
Tip: You can access the files in the device or on the
memory card using a compatible accessory that
supports the File Transfer Profile Client service (for
example, a laptop computer).
3. Select Yes to make the connection between your
device and the other device automatic, or No to
confirm the connection manually every time a
connection attempt is made. After pairing, the device
is saved to the paired devices page.
A Bluetooth connection is disconnected automatically
after sending or receiving data. Only Nokia PC Suite and
some accessories such as headsets may maintain a
connection even if not actively used.
To give a nickname to the paired device, select Options >
Assign short name. The nickname is only displayed in
your device.
126
To delete a pairing, select the device whose pairing you
To unblock a device, open the blocked devices tab, and
want to delete and Options > Delete. To delete all
select Options > Delete. To unblock all blocked devices,
pairings, select Options > Delete all. If you are currently select Options > Delete all.
connected to a device and cancel the pairing with that
If you reject a pairing request from another device, you are
device, pairing is removed immediately, and the
asked if you want to block all future connection requests
from this device. If you accept the query, the remote device
connection is ended.
To allow a paired device to connect automatically to your is added to the list of blocked devices.
device, select Set as authorised. Connections between
your device and the other device can be made without
your knowledge. No separate acceptance or authorisation
Security tips
is needed. Use this status for your own devices, such as
When you are not using Bluetooth connectivity, select
your compatible headset or computer, or devices that
belong to someone you trust. If you want to accept
connection requests from the other device separately
every time, select Set as unauthorised.
Bluetooth > Off or My phone's visibility > Hidden.
Do not pair with an unknown device.
To use a Bluetooth audio accessory such as a Bluetooth
handsfree or headset, you need to pair your device with
the accessory. For the passcode and further instructions,
see the accessory user guide. To connect to the audio
accessory, switch on the accessory. Some audio
SIM access profile
With the SIM access profile, you can access the SIM card of
your device from a compatible car kit device. This way, you
do not need a separate SIM card to access SIM card data
and connect to the GSM network.
accessories connect automatically to your device.
Otherwise, open the paired devices tab, select the
accessory and Options > Connect to audio device.
To use the SIM access profile, you need the following:
•
Compatible car kit device that supports Bluetooth
wireless technology
Block devices
•
Valid SIM card in your device
Select Menu > Control panel > Connectivity >
When the wireless device is in the remote SIM mode, you
can only use a compatible connected accessory, such as a
car kit, to make or receive calls.
Bluetooth.
To block a device from establishing a Bluetooth
connection to your device, open the paired devices tab.
Select a device you want to block and Options > Block.
Your wireless device will not make any calls, except to the
emergency numbers programmed into your device, while
in this mode.
127
To make calls from your device, you must first leave the
If the car kit is set as unauthorised, connection requests
remote SIM mode. If the device has been locked, enter the from it must be accepted separately every time.
lock code to unlock it first.
To end the remote SIM access connection from your device,
For more information about car kit devices and
compatibility with your device, see the Nokia web site and
your car kit user guide.
select Menu > Control panel > Connectivity >
Bluetooth and Remote SIM mode > Off.
Use the SIM access profile
Wireless LAN
1. Select Menu > Control panel > Connectivity >
Some places, like France, have restrictions on the use of
wireless LAN. Check with your local authorities for more
information.
Bluetooth and Remote SIM mode > On.
2. Activate Bluetooth connectivity in the car kit.
Note: In France, you are only allowed to use
3. Use your car kit to start a search for compatible devices.
WLAN indoors.
For instructions, see the user guide of your car kit.
Your device can detect and connect to a wireless local area
network (WLAN). To use WLAN, a network must be
available in the location and your device must be
connected to it.
4. Select your device from the list of compatible devices.
5. To pair the devices, enter the Bluetooth passcode
shown on the display of the car kit to your device.
Tip: If you have already accessed the SIM card from
the car kit with the active user profile, the car kit
searches automatically for a device with the SIM
card. If it finds your device, and automatic
authorisation is activated, the car kit automatically
connects to the GSM network when you switch on
the car ignition.
WLAN connections
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the risk
of unauthorised access to your data.
When you activate the remote SIM access profile, you can
use applications on your device that do not need network
or SIM services.
To make connections between your device and the car kit
without separate acceptance or authorisation, select
Menu > Control panel > Connectivity > Bluetooth,
and open the paired devices tab. Select the car kit and Set
as authorised, and answer Yes to the confirmation query.
To use a WLAN, you must create an internet access point
in a WLAN. Use the access point for applications that need
to connect to the internet. A WLAN connection is
established when you create a data connection using a
WLAN access point. The active WLAN connection is ended
when you end the data connection. You can also end the
connection manually.
128
You can use a WLAN during a voice call or when packet
data connection is active. You can only be connected to
one WLAN access point device at a time, but several
applications can use the same internet access point.
The WLAN wizard helps you find and connect to a wireless
LAN. When you open the application, your device starts to
scan for available WLANs and lists them.
When the device is in the Offline profile, you can still use
a WLAN, if available. Remember to comply with any
applicable safety requirements when establishing and
using a WLAN connection.
Some places, like France, have restrictions on the use of
wireless LAN. Check with your local authorities for more
information.
If you move the device to another location within the
WLAN and out of range of a WLAN access point, the
roaming functionality can automatically connect your
device to another access point that belongs to the same
WLAN. As long as you remain within range of access points
that belong to the same network, your device can stay
connected to the network.
Select Options and from the following:
•
•
Refresh — Update the list of available WLANs.
Filter WLAN networks — Filter out WLANs in the list
of found networks. The selected networks are filtered
out the next time the application searches for WLANs.
Start web browsing — Start browsing the web using
the access point of the WLAN.
•
•
•
•
Tip: To check the unique media access control (MAC)
address that identifies your device, for example to
configure the MAC address of your device to a WLAN
router, enter *#62209526# in the home screen. The
MAC address is displayed.
Cont.web browsing — Continue web browsing using
the currently active WLAN connection.
Disconnect WLAN — Disconnect the active connection
to the WLAN.
Details — View the details of the WLAN.
Important: Always enable one of the available
See WLAN availability
encryption methods to increase the security of your
wireless LAN connection. Usingencryption reduces the risk
of unauthorised access to your data.
To set your device to show wireless LAN (WLAN)
availability, select Menu > Control panel > Settings
and Connection > Wireless LAN > Show WLAN
availability.
Use the WLAN wizard in the home screen
In the home screen, the WLAN wizard shows the status of
your WLAN connections and network searches. To view the
available options, select the row showing the status.
Depending on the status, you can start the web browser
using a WLAN connection, connect to your net call service,
disconnect from a WLAN, search for WLANs, or set the
network scanning on or off.
If a WLAN is available,
is displayed.
WLAN wizard
Select Menu > Control panel > Connectivity > WLAN
wiz..
129
If WLAN scanning is turned off, and you are not connected To view detailed information about network connections,
to any WLAN, WLAN scanning off is displayed in the home select a connection from the list and Options > Details.
screen. To turn WLAN scanning on and search for available The type of information shown depends on the connection
WLANs, select the row showing the status.
type.
To start a search for available WLANs, select the row
To end the selected network connection, select Options >
showing the status and Search for WLAN.
Disconnect.
To turn WLAN scanning off, select the row showing the
To end all active network connections simultaneously,
status and Switch WLAN scan off.
select Options > Disconnect all.
When Start web browsing or Use for is selected, the
WLAN wizard automatically creates an access point for the
selected WLAN. The access point can also be used with
other applications requiring WLAN connection.
Search for WLAN
To search for WLANs available within range, select
Available WLAN networks. The available WLANs are
listed with their network mode (infrastructure or ad-hoc),
signal strength, and network encryption indicators, and
whether your device has an active connection with the
network.
If you select a secured WLAN, you are asked to enter the
relevant passcodes. To connect to a hidden network, you
must enter the correct service set identifier (SSID).
To use the found WLAN for a net call connection, select the
row showing the status, Use for, the desired net call
service, and the WLAN to be used.
To view the details of a network, scroll to it, and press the
scroll key.
To create an internet access point for a network, select
Options > Define access point.
Connection manager
Select Menu > Control panel > Connectivity > Conn.
mgr..
View and end active
connections
To see the open data connections, select Active data
connections.
130
Security and data management
Manage the data and software on your device, and take
care of the security of the device and its contents.
Select Menu > Control panel > Settings and General >
Security > Phone and SIM card.
To change the lock code, select Lock code. Enter the old
code and then the new code twice. The new code can be
4-255 characters long. Both alphabets and digits can be
used, and both uppercase and lowercase alphabets are
possible.
Important: Your device can only support one
antivirus application. Having more than one application
with antivirus functionality could affect performance and
operation or cause the device to stop functioning.
You can also lock the device remotely by sending a text
message to the device. To enable remote locking and to
define the text for the message, select Allow remote
lock > Yes. Enter the remote lock message and confirm
the message. The message must be at least 5 characters
long.
Lock the device
lock code to activate the phone function.
Important: If the device has been locked, enter the
When the device is locked, calls may be possible to the
official emergency number. Making an emergency call in
the offline profile or when the device is locked requires
that the device recognise the number to be an official
emergency number. It is advisable to change the profile
or unlock the device by entering the lock code before you
make the emergency call.
To prevent access to the contents of your device, lock the
device when in the home screen. Press the power key,
select Lock phone, and enter your lock code. The default
lock code is 12345. To unlock, press the left selection key,
enter your lock code, and press the scroll key.
Memory card security
Select Menu > Office > File mgr..
You can protect a memory card with a password to prevent
unauthorised access. To set a password, select Options >
Memory card password > Set. The password can be up
to 8 characters long and is case-sensitive. The password is
stored in your device. You do not need to enter it again
while you use the memory card on the same device. If you
use the memory card on another device, you are asked for
the password. Not all memory cards support password
protection.
131
To remove the memory card password, select Options >
Memory card password > Remove. When you remove
the password, the data on the memory card is not
protected against unauthorised use.
example, you can send the key to your computer. Enter
a pass phrase for the key and a name for the key file.
The pass phrase should be long and complex.
Encrypt with restored key — Encrypt the memory
card with a key you have received. Select the key file,
and enter the pass phrase.
•
To open a locked memory card, select Options > Unlock
memory card. Enter the password.
If you cannot recall the password to unlock a locked
memory card, you may reformat the card, in which case
the card is unlocked and password removed. Formatting
a memory card deletes all data stored on the card.
Decrypt device memory or
memory card
Always remember to decrypt the device memory and/or
the memory card before updating the device software.
Encryption
To decrypt the device memory, select Phone memory.
Select Menu > Control panel > Phone > Encryption.
To decrypt the memory card without destroying the
encryption key, select Memory card > Decrypt.
Encrypt your device or memory card to prevent outsiders
from accessing your important information.
To decrypt the memory card and destroy the encryption
key, select Memory card > Decrypt and turn off
encryption.
Encrypt device memory or
memory card
Fixed dialling
To encrypt the device memory, select Phone memory.
Select Menu > Contacts and Options > SIM contacts >
To encrypt the memory card, select Memory card and
Fixed dial contacts.
from the following:
With the fixed dialling service, you can restrict calls from
your device to certain phone numbers. Not all SIM cards
support the fixed dialling service. For more information,
contact your service provider.
•
Encrypt without saving key — Encrypt the memory
card without saving the encryption key. If you select
this option, you cannot use the memory card in other
devices, and if you restore factory settings, you cannot
decrypt the memory card.
When fixed dialling is activated, calls may be possible to
the official emergency number programmed into your
device.
•
Encrypt and save key — Encrypt the memory card and
save the key manually in the default folder. For security,
store the key to a safe place outside the device. For
132
1. To restrict calls from your device, select Options >
You can download a certificate from a web site, or receive
a certificate as a message. Certificates should be used
New SIM contact, and enter the contact name and
phone number to the list of numbers to which calls are when you connect to an online bank or a remote server to
allowed, or select Add from Contacts to copy the
contact from the contacts list. To restrict calls by a
country prefix, enter the country prefix in the list of
transfer confidential information. They should also be
used if you want to reduce the risk of viruses or other
malicious software, and to check the authenticity of
numbers. All phone numbers to which calls are allowed software when you download and install software to your
must start with this country prefix.
device.
2. Select Options > Activate fixed dialling. You need
your PIN2 code to activate and deactivate fixed dialling
or edit your fixed dialling contacts. If you do not have
the code, contact your service provider. To cancel the
service, select Options > Deactivate fixed dialling.
Tip: When you add a new certificate, check its
authenticity.
View certificate details
Tip: To send textmessagesto the SIM contactswhile
the fixed dialling service is active, you need to add
the text message centre number to the fixed dialling
list.
You can only be sure of the correct identity of a server
when the signature and the validity period of a server
certificate have been checked.
To view certificate details, open a certificate folder, and
select a certificate and Options > Certificate details.
One of the following notes may appear:
Certificate manager
•
Certificate not trusted — You have not set any
application to use the certificate. You may want to
change the trust settings.
Select Menu > Control panel > Settings and General >
Security > Certificate management.
Digital certificates are used to verify the origins of
software but do not guarantee safety. There are four
different types of certificates: authority certificates,
personal certificates, trusted site certificates, and device
certificates. During a secure connection, a server may send
a server certificate to your device. Upon receipt, it is
checked through an authority certificate stored in your
device. You receive notification if the identity of the server
is not authentic or if you do not have the correct certificate
in your device.
•
•
•
Expired certificate — The period of validity has ended
for the selected certificate.
Certificate not valid yet — The period of validity has
not yet begun for the selected certificate.
Certificate corrupted — The certificate cannot be
used. Contact the certificate issuer.
133
•
•
App. installation — New Java application.
Online certif. check — Online certificate status
protocol.
Certificate trust settings
Select Menu > Control panel > Settings and General >
Security > Certificate management.
Trusting a certificate means that you authorise it to verify
web pages, e-mail servers, software packages, and other
data. Only trusted certificates can be used to verify services
and software.
View and edit security
modules
Select Menu > Control panel > Settings and General >
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
"Expired certificate" or "Certificate not valid yet" is shown,
even if the certificate should be valid, check that the
current date and time in your device are correct.
Security > Security module.
To view or edit a security module, select the module from
the list.
To view detailed information about a security module,
select Options > Security details.
To edit the PIN codes for the security module, open the
module, and select Module PIN to edit the PIN code for
the security module or Signing PIN to edit the PIN code
for digital signatures. You may not be able to change these
codes for all security modules.
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
The key store contains the contents of the security module.
To delete the key store, select Options > Delete. You may
not be able to delete the key store of all security modules.
To change the trust settings, select a certificate and
Options > Trust settings. Scroll to an application field,
and press the scroll key to select Yes or No. You cannot
change the trust settings of a personal certificate.
Remote configuration
Depending on the certificate, a list of applications that can
Select Menu > Control panel > Phone > Device
use the certificate is displayed:
mgr..
•
•
Symbian installation — New Symbian operating
system application.
With Device manager, you can manage settings, data, and
software on your device remotely.
134
Internet — E-mail and graphics.
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles
and different configuration settings from your service
providers or company information management
department. Configuration settings may include
connection and other settings used by different
applications in your device. The available options may
vary.
•
Auto-accept all requests — Select Yes if you do not
want the server to ask for your confirmation when it
initiates a configuration session.
•
•
Network authentication — Select whether to use
http authentication.
Network user name and Network password — Enter
your user ID and password for the http authentication.
This setting is available only if you have selected
Network authentication to be used.
The remote configuration connection is usually started by
the server when the device settings need to be updated.
To connect to the server and receive configuration settings
for your device, select Options > Start configuration.
To create a new server profile, select Options > Server
profiles > Options > New server profile.
To view the configuration log of the selected profile, select
Options > View log.
You may receive these settings from your service provider
in a configuration message. If not, define the following:
To update the device software over the air, select
Options > Settings. The update does not erase your
settings. When you receive the update package on your
device, follow the instructions on the display. Your device
is restarted once the installation is complete.
•
•
•
Server name — Enter a name for the configuration
server.
Server ID — Enter the unique ID to identify the
configuration server.
Downloading software updates may involve the
transmission of large amounts of data through your
service provider's network. Contact your service provider
for information about data transmission charges. Make
sure that the device battery has enough power, or connect
the charger before starting the update.
Server password — Enter a password to identify your
device to the server.
•
•
Session mode — Select the preferred connection type.
Access point — Select the access point to use for the
connection, or create a new access point. You can also
choose to be asked for the access point every time you
start a connection. This setting is available only if you
have selected Internet as the bearer type.
Host address — Enter the web address of the
configuration server.
•
Application manager
•
•
Port — Enter the port number of the server.
User name and Password — Enter your user ID and
password for the configuration server.
With Application manager, you can see the software
•
Allow configuration — Select Yes to allow the server
to initiate a configuration session.
packages installed in your device. You can view details of
135
installed applications, remove applications, and define
installation settings.
that are Symbian Signed or have passed the Java Verified
testing.
You can install two types of applications and software to
Before installation, note the following:
your device:
•
To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
•
•
J2ME applications based on Java technology with the
extension .jad or .jar
Other applications and software suitable for the
Symbian operating system with the extension .sis
or .sisx
To display the security certificate details of the
application, in Details:, scroll to Certificates:, and select
View details.
Only install software that is compatible with your device.
•
If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original installation
file or a full backup copy of the removed software
package. To restore the original application, remove
the application, and install the application again from
the original installation file or the backup copy.
Install applications
You can transfer installation files to your device from a
compatible computer, download them during browsing,
or receive them in a multimedia message, as an e-mail
attachment, or using other connectivity methods, such as
Bluetooth connectivity. You can use Nokia Application
Installer in Nokia PC Suite to install an application to your
device.
The JAR file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are downloading
the JAR file, you may need to enter a user name and
password to access the server. You obtain these from
the supplier or manufacturer of the application.
Select Menu > Control panel > App. mgr..
Icons in Application manager indicate the following:
SIS or SISX application
To install an application or software:
1. To locate an installation file, select Menu > Control
panel > App. mgr.. Alternatively, search installation
files using File manager, or open a message in
Java application
widgets
Messaging > Inbox that contains an installation file.
2. In Application manager, select Options > Install. In
other applications, to start the installation, select the
installation file.
Important: Only install and use applications and
other software from trusted sources, such as applications
136
During installation, the device shows information
If you remove software, you can only reinstall it if you have
about the progress of the installation. If you install an the original software package or a full backup of the
application without a digital signature or certification, removed software package. If you remove a software
the device displays a warning. Continue installation
only if you are sure of the origin and contents of the
application.
package, you may no longer be able to open documents
created with that software.
If another software package depends on the software
package that you removed, the other software package
may stop working. For more information, see the
documentation of the installed software package.
To start an installed application, locate the application in
the menu, and select the application.
To see which software packages are installed or removed
and when, select Options > View log.
Application manager settings
Important: Your device can only support one
antivirus application. Having more than one application
with antivirus functionality could affect performance and
operation or cause the device to stop functioning.
Select Menu > Control panel > App. mgr..
Select Options > Applications > Settings and from the
following:
•
Software installation — Select whether Symbian
software that has no verified digital signature can be
installed.
After you install applications to a compatible memory
card, installation files (.sis, .sisx) remain in the device
memory. The files may use large amounts of memory and
prevent you from storing other files. To maintain sufficient
memory, use Nokia PC Suite to back up installation files to
a compatible PC, then use the file manager to remove the
installation files from the device memory. If the .sis file is
a message attachment, delete the message from the
Messaging inbox.
•
•
Online certificate check — Check the online
certificates before installing an application.
Default web address — Set the default address used
when checking online certificates.
Some Java applications may require that a message be
sent or a network connection be made to a specific access
point to download extra data or components.
Remove applications and
Software updates
software
Nokia may produce software updates that offer new
features, enhanced functions, and improved performance.
You may be able to request these updates through the
Nokia Software Updater PC application. Software updates
Select Menu > Control panel > App. mgr..
Scroll to a software package, and select Options >
137
Remove. Select Yes to confirm.
may not be available for all products or their variants. Not
all operators may endorse the latest software versions
available.
Application Update
Select Menu > Control panel > Phone > App.
To update the device software, you need the Nokia
Software Updater application and a compatible PC with
Microsoft Windows 2000, XP, or Vista operating system,
broadband internet access, and a compatible data cable
to connect your device to the PC.
update.
With Application Update, you can check the available
updates for applications and download them to your
device.
After updating your device software using Application
Update, the instructions in the user guide or the helps may
not be up to date.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls, until
the installation is completed and the device is restarted.
Be sure to back up data before accepting installation of an
update.
To download the available updates, select Options >
Start update.
To unmark updates, select the updates.
To view information on an update, select Options > View
using your device and 100 MB using a PC.
details.
The download and installation may take up to 20 minutes
with Device manager and up to 30 minutes with Nokia
Software Updater.
To change the settings, select Options > Settings.
To get more information and to download the Nokia
Software Updater application, visit www.nokia.com/
softwareupdate or your local Nokia website.
Licenses
About Licenses
If software updates over the air are supported by your
network, you may also be able to request updates through
the device.
Select Menu > Control panel > Phone > Licences.
Some media files, such as images, music, or video clips, are
protected by digital usage rights. The licenses for such files
may allow or restrict their usage. For example, with some
licenses you may listen to a song only a limited number of
times. During one playback session you may rewind, fast-
forward, or pause the song, but once you stop it, you have
used one of the instances allowed.
Your device may be able to periodically check for new
software updates with Nokia Software Checker. Select
Tip: To check the software version in your device,
enter *#0000# in the standby mode.
138
•
•
Content sending — Allowed means that you can send
the file to another device. Not allowed means that you
cannot send the file to another device.
Use licenses
Digital rights management (DRM) protected content
comes with an associated activation key that defines your
rights to use the content.
Content in phone — Yes means that the file is in the
device and the path of the file is displayed. No means
that the related file is not currently in the device.
If your device has OMA DRM-protected content, to back up
both the activation keys and the content, use the backup
feature of Nokia PC Suite. Other transfer methods may not
transfer the activation keys which need to be restored
with the content for you to be able to continue the use of
OMA DRM-protected content after the device memory is
formatted. You may also need to restore the activation
keys in case the files on your device get corrupted.
To activate a key, in the licenses main view, select Invalid
licences > Options > Get licence. Establish a network
connection at the prompt, and you are directed to a
website where you can purchase rights to the media.
To remove file rights, open the valid keys tab or the keys
not in use tab, scroll to the desired file, and select
Options > Delete. If there are several rights related to
the same media file, all the rights are deleted.
If your device has WMDRM-protected content, both the
activation keys and the content will be lost if the device
memory is formatted. You may also lose the activation
keys and the content if the files on your device get
corrupted. Losing the activation keys or the content may
limit your ability to use the same content on your device
again. For more information, contact your service
provider.
The group key view displays all of the files related to a
group right. If you have downloaded multiple media files
with the same rights, they are all displayed in this view.
You can open the group view from either the valid keys or
invalid keys tabs. To access these files, open the group
rights folder.
Some activation keys may be connected to a specific SIM
card, and the protected content can be accessed only if the
SIM card is inserted in the device.
Sync
Select Menu > Control panel > Sync.
To view your licenses by type, select Valid licences,
Invalid licences, or Not in use.
Sync enables you to synchronise your notes, calendar
entries, text and multimedia messages, browser
bookmarks, or contacts with various compatible
applications on a compatible computer or on the internet.
To view the key details, select Options > Licence
details.
The following details are displayed for each media file:
You may receive synchronisation settings in a special
•
Status — The status is Licence is valid, Licence
message from your service provider.
expired, or Licence not yet valid.
139
A synchronisation profile contains the necessary settings
for synchronisation.
Manage VPN
Select VPN management, and from the following:
When you open the Sync application, the default or
previously used sync profile is displayed. To modify the
profile, scroll to a sync item, and select Mark to include it
in the profile or Unmark to leave it out.
•
•
VPN policies — Install, view, and update VPN policies.
VPN policy servers — Edit the connection settings of
VPN policy servers from which you can install and
update VPN policies. A policy server refers to a Nokia
Security Service Manager (NSSM), which is not
necessarily required.
To manage sync profiles, select Options and the desired
option.
To synchronise data, select Options > Synchronise. To
•
VPN log — View the log for your VPN policy
installations, updates and synchronisations, and other
VPN connections.
cancel synchronisation before it finishes, select Cancel.
Mobile VPN
Edit VPN access points
Select Menu > Control panel > Settings and
Select Menu > Control panel > Settings and
Connection > VPN.
Connection > Network destinations.
The Nokia mobile virtual private network (VPN) client
creates a secure connection to compatible corporate
intranet and services, such as e-mail. Your device connects
from a mobile network, through the internet, to a
corporate VPN gateway that acts as a front door to the
compatible corporate network. The VPN client uses IP
Security (IPSec) technology. IPSec is a framework of open
standards for supporting the secure exchange of data over
IP networks.
An access point is where your phone connects to the
network. To use e-mail and multimedia services or to
browse web pages you must first define internet access
points for these services. VPN access points pair VPN
policies with regular internet access points to create
secure connections.
Your service provider may preset some or all access points
for your device, and you may not be able to create, edit,
or remove them.
VPN policies define the method used by the VPN client and
a VPN gateway to authenticate each other, and the
encryption algorithms that they use to help protect the
confidentiality of data. For a VPN policy, contact your
company's IT department.
Select a destination and Options > Edit, and define the
following:
•
•
Connection name — Enter a name for the VPN access
point.
VPN policy — Select the VPN policy to combine with
the internet access point.
To install and configure the VPN client, certificates, and
140
policies, contact the IT administrator of your organisation.
•
•
Internet access point — Select the internet access
point with which to combine the VPN policy to create
secure connections for data transfer.
Proxy server address — Enter the proxy server
address of the private network.
•
•
Proxy port number — Enter the proxy port number.
Use access point — Select whether connections using
this access point are established automatically.
The settings available for editing may vary. For the correct
settings, contact your company's IT department.
Use a VPN connection in an
application
You may have to prove your identity when you log on to
the enterprise network. Contact your company's IT
department for the credentials.
To use a VPN connection in an application, the application
must be associated with a VPN access point.
Tip: You can configure the application's connection
setting to Always ask, in which case you select the
VPN access point from a list of connections when a
connection is established.
1. In the application in which you want to create a VPN
connection, select a VPN access point as the access
point.
2. If you are using legacy authentication, enter your VPN
user name and passcode or password. If the SecurID
token has become out of synchronisation with the
clock of the ACE/Server, enter the next passcode. If you
are using certificate-based authentication, you may
have to enter the key store password.
141
Settings
Select Menu > Control panel > Settings.
•
•
•
Factory settings — Restore the original settings of the
device.
You can define and modify various settings of your device.
Modifying these settings affects the operation of your
device across several applications.
Positioning — Define the positioning method and
server for GPS-based applications.
Slide handling — Change the slide settings.
Some settings may be preset for the device or sent to you
in a special message by your service provider. You may not
be able to change such settings.
Personalisation settings
Select the setting you want to edit to do the following:
Select Menu > Control panel > Settings and General >
•
•
•
•
Switch between two values, such as on or off.
Select a value from a list.
Personalisation.
Display settings
Open a text editor to enter a value.
To define the level of light that the device needs before
switching on the backlight, select Display > Light
sensor.
Open a slider, and scroll left or right to adjust a value.
To change the text size, select Display > Font size.
General settings
To adjust the length of time the display can be left idle
before the screen saver is activated, select Display >
Power saver time-out.
Select Menu > Control panel > Settings and General.
Select from the following:
•
Personalisation — Change the display settings, and
personalise the device.
To select a welcome note or logo for the display, select
Display > Welcome note / logo. You can either choose
the default welcome note, enter your own text, or select
an image.
•
•
Date and time — Change the date and time.
Enhancement — Define the settings for your
accessories.
To set how quickly the display dims after the last keypress,
•
•
Sensor settings — Change the sensor settings.
Security — Define the security settings.
142
select Display > Light time-out.
Tone settings
Language settings
Select Menu > Control panel > Settings and General > To set the language used on the device display, select
Personalisation > Tones.
Language > Phone language.
Select from the following:
To select the language in which you write notes and
messages, select Language > Writing language.
•
Ringing tone — Select a ringing tone from the list, or
select Download sounds to open a bookmark folder
containing a list of bookmarks for downloading tones
using the browser. If you have two alternate phone
lines in use, you can specify a ringing tone for each line.
Video call tone — Select a ringing tone for video calls.
Say caller's name — If you select this setting, and
someone from your contacts list calls you, the device
sounds a ringing tone that is a combination of the
spoken name of the contact and the selected ringing
tone.
To select whether to use the predictive text input, select
Language > Predictive text.
To define the settings for the predictive text input, select
Predictive text settings.
•
•
Scroll key lights
Select Menu > Control panel > Settings and General >
Personalisation > Notification lights.
When you miss a call or receive a message, the scroll key
starts blinking to indicate the event. To select of which
events you want to be notified or to set the blinking time,
select Notification light.
•
•
•
•
•
Ringing type — Select how you want the ringing tone
to alert you.
Ringing volume — Set the volume level of the ringing
tone.
When you do not use the device for a certain period of
time, the scroll key starts blinking slowly as if it was
breathing. To turn the breathing effect on or off, select
Breathing light.
Message alert tone — Select a tone for received text
messages.
E-mail alert tone — Select a tone for received e-mail
messages.
Calendar alarm tone — Select a tone for calendar
alerts.
Settings for One-touch keys
Select Menu > Control panel > Settings and General >
•
•
Clock alarm tone — Select a tone for clock alarms.
Vibrating alert — Set the device to vibrate when you
receive a call.
Personalisation > One-touch keys.
To select which application and task is opened when you
press a One-touch key, select the key and Options >
Open.
•
Keypad tones — Set the volume level of the keypad
tones.
•
•
Warning tones — Turn the warning tones on or off.
Opening sound or Closing sound — Select a tone that
sounds when you open or close the slide.
To restore the preset applications and tasks, select
Restore defaults.
143
To illuminate the device while it is attached to an
Date and time settings
accessory, select Lights > On.
Select Menu > Control panel > Settings and General >
Date and time.
Sensor settings
Select from the following:
Select Menu > Control panel > Settings and General >
•
•
•
Date and Time — Set the current date and time.
Sensor settings.
Time zone — Define your time zone.
Automatic time update — Update the time, date, and
time zone information automatically (network service).
Time format and Time separator — Select whether
to use the 12-hour or 24-hour clock system and with
which symbol to separate hours and minutes.
Date format and Date separator — Define the date
format and separator.
To set the display to rotate automatically according to the
device's orientation, select Display rotation.
•
To set the device to silence an incoming call or snooze an
alarm when you tap the device twice, select Tap to
silence.
•
To set the device to silence an incoming call or snooze an
•
•
•
Clock type — Define the clock type.
alarm when you turn the device face down, select Turn to
Clock alarm tone — Select the tone for the alarm clock. silence.
Workdays — Define thedaysof theweek thatare work
days for you.
Security settings
About security settings
Common accessory settings
Select Menu > Control panel > Settings and General >
Select Menu > Control panel > Settings and General >
Security.
Enhancement.
Define the following security settings:
With most accessories, you can do the following:
•
•
•
Phone and SIM card — Adjust the security settings for
To define which profile is activated when you attach an
accessory to your device, select the accessory and Default
profile.
your device and SIM card.
Certificate management — Manage your security
certificates.
To set the device to answer phone calls automatically after
5 seconds when an accessory is attached, select
Automatic answer > On. If the ringing type is set to
Beep once or Silent in the selected profile, automatic
answering is disabled.
Security module — Manage your security module.
Avoid using codes that are similar to emergency numbers
to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
144
Documents, contact information, calendar entries, and
files are unaffected.
Device and SIM card security
To change the PIN code, select Phone and SIM card >
PIN code. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised use
and is provided with the SIM card. After three consecutive
incorrect PIN code entries, the code is blocked, and you
need to use the PUK code to unblock it before you can use
the SIM card again.
Positioning settings
Select Menu > Control panel > Settings and General >
Positioning.
To use a specific positioning method to detect the location
of your device, select Positioning methods.
To set the keypad to lock automatically after a defined
period, select Phone and SIM card > Keypad autolock
period.
To set a time-out after which the device is automatically
locked and can be used only if the correct lock code is
entered, select Phone and SIM card > Phone autolock
period. Enter a number for the time-out in minutes, or
select None to set off the autolock period. Whenthedevice
is locked, you can still answer incoming calls, and calls may
still be possible to the official emergency number
programmed into your device.
To set a new lock code, select Phone and SIM card > Lock
code. The preset lock code is 12345. Enter the current code
and then the new code twice. The new code can be 4-255
characters long. Both alphabets and digits can be used,
and both uppercase and lowercase alphabets are possible.
The device notifies you if the lock code is not properly
formatted.
To select a positioning server, select Positioning server.
To define the measurement system and coordinate format
for location notations, select Notation preferences.
Slide handling
Select Menu > Control panel > Settings and General >
Slide handling.
To select which application you want to open when you
open the slide, select Opening the slide.
To set the device to keep the active application open when
you close the slide, select Closing the slide.
To set the device to lock the keypad when you close the
slide, select Slide handling.
To select a tone that sounds when you open or close the
slide, select Tones > Opening sound or Closing sound.
Restore original settings
E-mail key settings
To restore the original device settings, select Menu >
Control panel > Settings and General > Factory
settings. To do this, you need your device lock code. After
resetting, the device may take a longer time to switch on.
Select Menu > Control panel > Settings and General.
145
To select which mailbox to open with the e-mail key, select
E-mail key settings > E-mail key, and press the scroll
key.
•
•
•
•
•
Reject call with message — Reject a call, and send a
text message to the caller.
Message text — Write the standard text message that
is sent when you reject a call.
Own video in recvd. call — Allow or deny video
sending during a video call from your device.
Image in video call — Display a still image if video is
not sent during a video call.
Telephone settings
Select Menu > Control panel > Settings and Phone.
Automatic redial — Set your device to make a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press the end key.
Select from the following:
•
•
Call — Define general call settings.
divert", p. 65.
•
•
Show call duration — Display the length of a call
during the call.
•
•
Call barring — Define your call barring settings. See
"Call barring", p. 66.
Summary after call — Display the length of a call after
the call.
Network — Adjust the network settings.
•
•
•
Speed dialling — Activate speed dialling.
Anykey answer — Activate anykey answer.
Line in use — This setting (network service) is shown
only if the SIM card supports two subscriber numbers,
that is, two phone lines. Select which phone line you
want to use for making calls and sending text
messages. Calls on both lines can be answered
irrespective of the selected line. If you select Line 2 and
have not subscribed to this network service, you are not
able to make calls. When line 2 is selected, is
displayed in the home screen.
Call settings
Select Menu > Control panel > Settings and Phone >
Call.
Select from the following:
•
•
•
•
•
Send my caller ID — Display your phone number to
the person you are calling.
Send my internet call ID — Display your net call
address to the person you are calling using a net call.
Internet call waiting — Set the device to notify you
of a new incoming internet call while you are in a call.
Internet call alert — Select On to set your device to
alert for incoming internet calls. If you select Off, you
receive only a notification if you missed a call.
•
Line change — Prevent line selection (network
service), if supported by your SIM card. To change this
setting, you need the PIN2 code.
146
•
•
VPN — Manage the settings for virtual private
networking.
Network settings
Select Menu > Control panel > Settings and Phone >
Packet data — Define when packet data network is
attached, and enter the default packet switched access
point name if you use your device as a modem for a
computer.
Network.
To select the network mode, select Network mode and
Dual mode, UMTS, or GSM. In dual mode, the device
switches automatically between networks.
•
•
Wireless LAN — Set the device to display an indicator
when a wireless LAN (WLAN) is available, and define
how often the device searches for networks.
Video sharing — Enable video sharing, select the SIP
profile for video sharing, and define the video saving
settings.
Tip: Selecting UMTS enables faster data transfer,
but may increase the demand on battery power and
reduce the battery life. In regions close to both GSM
and UMTS networks, selecting Dual mode may
cause constant jumping between the two networks,
which also increases the demand on battery power.
•
•
SIP settings — View or create session initiation
protocol (SIP) profiles.
XDM settings — Create an XDM profile. The XDM profile
is required for many communications applications, for
example, presence.
To select the operator, select Operator selection and
Manual to select from available networks, or Automatic
to set the device to select the network automatically.
To set the device to indicate when it is used in a
microcellular network (MCN), select Cell info display >
On.
•
Presence — Edit the settings for presence (network
service). To register for the service, contact your service
provider.
•
•
Remote drives — Connect the device to a remote
drive.
Configurations — View and delete trusted servers
from which your device may receive configuration
settings.
Connection settings
Select Menu > Control panel > Settings and
•
APN control — Restrict packet data connections.
Connection.
Select from the following:
CArcecaetesas npeowinatcscess point
•
•
•
Bluetooth — Edit the Bluetooth settings.
USB — Edit the data cable settings.
Destinations — Set up new or edit existing access
points. Some or all access points may be preset for your
device by your service provider, and you may not be
able to create, edit, or remove them.
Select Menu > Control panel > Settings and
Connection > Destinations.
147
You may receive access point settings in a message from
To use a data connection, your service provider must
a service provider. Some or all access points may be preset support this feature, and if necessary, activate it for your
for your device by your service provider, and you may not SIM card.
be able to change, create, edit, or remove them.
Create access point groups
When you select one of the access point groups (
,
,
Select Menu > Control panel > Settings and
,
,
), you can see the access point types:
Connection > Destinations.
indicates a protected access point
Some applications allow you to use access point groups to
indicates a packet data access point
indicates a wireless LAN (WLAN) access point
connect to a network.
To avoid selecting which access point to use every time
the device attempts to connect to a network, you can
create a group that contains various access points, and
define the order in which the access points are used to
connect to a network.
Tip: You can create internet access points in a WLAN
with the WLAN wizard.
To create a new access point, select Access point. The
device asks to check for available connections. After the
search, connections that are already available are
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group and
use the group for browsing the web. If you give the WLAN
displayed and can be shared by a new access point. If you
skip this step, you are asked to select a connection method access point the higher priority, the device connects to the
and to define the settings needed.
internet through a WLAN if available and through a packet
data connection if not.
To edit the settings of an access point, select one of the
access point groups, scroll to an access point, and select
Edit. Use the instructions provided by your service
provider to edit the following:
To create a new access point group, select Options >
Manage > New destination.
To add access points to an access point group, select the
group and Options > New access point. To copy an
existing access point from another group, select the
group, scroll to an existing access point, and select
Options > Organise > Copy to other dest..
•
•
Connection name — Enter a name for the connection.
Data bearer — Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red *. Other fields can be left
empty, unless your service provider has instructed
otherwise.
To change the priority order of access points within a
group, scroll to an access point and Options >
Organise > Change priority.
148
•
Network type — Select the internet protocol type to
transfer data to and from your device. The other
settings depend on the selected network type.
Phone IP address(for IPv4only) — Enter the IPaddress
of your device.
Packet data access points
Select Menu > Control panel > Settings and
Connection > Destinations > Access point, and follow
the instructions on the display. Or, open one of the access
•
•
point groups, select an access point marked with
, and
DNS addresses — Enter the IP addressesof theprimary
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your
internet service provider.
select Edit.
Use the instructions provided by your service provider to
edit the following:
•
•
Proxy server address — Enter the address of the proxy
server.
•
•
Access point name — The access point name is
provided by your service provider.
Proxy port number — Enter the port number of the
User name — The user name may be needed to make
a data connection, and is usually provided by your
service provider.
proxy server.
WLAN internet access points
•
Prompt password — If you want to set the device to
ask for a password every time you log in to a server, or
if you do not want to save your password in the device,
select Yes.
Select Menu > Control panel > Settings and
Connection > Destinations > Access point, and follow
the instructions on the display. Or, open one of the access
point groups, select an access point marked with , and
select Edit.
•
•
•
•
Password — A password may be needed to make a
data connection and is usually provided by your service
provider.
Use the instructions provided by your service provider to
Authentication — Select Secure to always send your
password encrypted or Normal to send your password
encrypted when possible.
edit the following:
•
WLAN network name — Select Enter manually or
Search for networks. If you select an existing network,
WLAN network mode and WLAN security mode are
determined by the settings of its access point device.
Network status — Define whether the network name
is displayed.
Homepage — Depending on the access point type you
are setting up, enter the web address or the address of
the multimedia message centre.
•
•
Use access point — Select After confirmation to set
the device to ask for confirmation before the
connection using this access point is created, or
Automatically to set the device to connect to the
destination using this access point automatically.
WLAN network mode — Select Ad-hoc to create an
ad hoc network, and to allow devices to send and
receive data directly; a WLAN access point device is not
needed. In an ad hoc network, all devices must use the
same WLAN network name.
Select Options > Advanced settings and from the
149
following:
•
•
WLAN security mode — Select the encryption used:
WEP, 802.1x (not for ad hoc networks), or WPA/
WPA2. If you select Open network, no encryption is
used. The WEP, 802.1x, and WPA functions can be used
only if the network supports them.
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your device
in GSM and UMTS networks, it is possible to have multiple
data connections active at the same time; access points
can share a data connection, and data connections remain
active, for example, during voice calls.
To define the packet data settings, select Packet data
connection and When available to register the device to
the packet data network when you switch the device on
in a supported network, or When needed to register the
device to a packet data network only when an application
or action attempts to establish a packet data connection.
This setting affects all access points for packet data
connections. To use the device as a packet data modem
for your computer, select Access point, and enter the
access point name provided by your service provider. To
use a high-speed data connection, select High speed
packet access > Enabled.
Use access point — Select After confirmation to set
the device to ask for confirmation before the
connection using this access point is created or
Automatically to set the device to connect to the
destination using this access point automatically.
To enter the settings for the selected security mode, select
WLAN security settings.
Advanced WLAN settings
Select Options > Advanced settings and from the
following:
•
IPv4 settings — Enter the IP address of your device,
the subnet IP address, the default gateway, and the IP
addresses of the primary and secondary DNS servers.
Contact your internet service provider for these
addresses.
WLAN settings
•
•
IPv6 settings — Define the type of DNS address.
Ad-hoc channel (only for ad hoc networks) — To enter
a channel number (1-11) manually, select User
defined.
SelectMenu > Control panel > Settings and
Connection > Wireless LAN.
To have an indicator displayed when there is a wireless
LAN (WLAN) available in your current location, select Show
WLAN availability > Yes.
•
•
Proxy server address — Enter the address for the
proxy server.
Proxy port number — Enter the proxy port number.
To select the interval for your device to scan for available
WLANs, and to update the indicator, select Scan for
networks. This setting is not available unless you select
Show WLAN availability > Yes.
Packet data (GPRS) settings
Select Menu > Control panel > Settings and
To set the device to test the internet capability of the
selected WLAN automatically, to ask for permission every
time, or to never perform the connectivity test, select
150
Connection > Packet data.
Internet connectivity test > Run automatically, Ask
every time, or Never run. If you select Run
automatically or allow the test to be performed when the
device asks for it, and the connectivity test is performed
successfully, the access point is saved to internet
destinations.
To check the unique media access control (MAC) address
that identifies your device, enter *#62209526# in the
home screen. The MAC address is displayed.
enhances the battery performance but may weaken
WLAN interoperability.
To restore all settings to their original values, select
Options > Restore defaults.
WLAN security settings
Select Menu > Control panel > Settings and
Connection > Destinations > Access point, and follow
the instructions on the display.
To edit a wireless LAN (WLAN) access point, open one of
Advanced WLAN settings
the access point groups, and select an access point marked
Select Options > Advanced settings. The advanced
WLAN settings are normally defined automatically, and
changing them is not recommended.
with
.
To enter the settings for the selected security mode, select
WLAN security settings.
To edit the settings manually, select Automatic
configuration > Disabled, and define the following:
•
•
•
Long retry limit — Enter the maximum number of
transmission attempts if the device does not receive a
receiving acknowledgement signal from the network.
Short retry limit — Enter the maximum number of
transmission attempts if the device does not receive a
clear-to-send signal from the network.
WEP security settings
Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the required
WEP keys. When the WEP security mode is in use, and your
device receives a data packet not encrypted with the WEP
keys, the data is discarded.
RTS threshold — Select the data packet size at which
the WLAN access point device issues a request to send
before sending the packet.
•
•
•
TX power level — Select the power level of your device
when sending data.
In an ad-hoc network, all devices must use the same WEP
key.
Radio measurements — Enable or disable the radio
measurements.
Select WLAN security settings and from the following:
Power saving — Select whether to use the WLAN
power saving mechanism to save the power in the
device battery. Using the power saving mechanism
•
•
•
WEP key in use — Select the desired WEP key.
Authentication type — Select Open or Shared.
WEP key settings — Edit the settings for the WEP key.
151
Select WLAN security settings and from the following:
WEP key settings
•
•
•
•
WPA/WPA2 — Select EAP (Extensible Authentication
Protocol) or Pre-shared key (a secret key used for
device identification).
In an ad-hoc network, all devices must use the same WEP
key.
Select WLAN security settings > WEP key settings and
EAP plug-in settings — If you select WPA/WPA2 >
EAP, select which EAP plug-ins defined in your device to
use with the access point.
from the following:
•
•
•
WEP encryption — Select the desired WEP encryption
Pre-shared key — If you select WPA/WPA2 > Pre-
shared key, enter the shared private key that identifies
your device to the WLAN to which you connect.
WPA2 only mode — To allow both TKIP and AES
(Advanced Encryption Standard) encryption, select Off.
To allow AES only, select On
key length.
WEP key format — Select whether you want to enter
the WEP key data in ASCII or Hexadecimal format.
WEP key — Enter the WEP key data.
802.1x security settings
Select 802.1x as the WLAN security mode.
Wireless LAN plugins
802.1x authenticates and authorises devices to access a
wireless network, and prevents access if the authorisation
process fails.
Select Menu > Control panel > Settings and
Connection > Destinations, and an access point group.
The extensible authentication protocol (EAP) plug-ins are
used in wireless networks to authenticate wireless devices
and authentication servers, and the different EAP plug-ins
make possible the use of various EAP methods (network
service).
Select WLAN security settings and from the following:
•
•
•
WPA/WPA2 — Select EAP (Extensible Authentication
Protocol) or Pre-shared key (a secret key used for
device identification).
EAP plug-in settings — If you selected WPA/WPA2 >
EAP, select which EAP plug-ins defined in your device to
use with the access point.
You can view the EAP plug-ins currently installed in your
device (network service).
Pre-shared key — If you selected WPA/WPA2 > Pre-
shared key, enter the shared private key that identifies
your device to the WLAN to which you connect.
EAP plug-ins
1. To define the EAP plug-in settings, select Options >
New access point and define an access point that uses
WLAN as a data bearer.
2. Select 802.1x or WPA/WPA2 as the security mode.
WPA security settings
152
Select WPA/WPA2 as the WLAN security mode.
3. Select WLAN security settings > WPA/WPA2 >
To create a SIP profile, select Options > New SIP
EAP > EAP plug-in settings.
profile > Use default profile or Use existing profile.
To select the SIP profile you want to use by default for
communication sessions, select Options > Default
profile.
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN using
the access point, select the desired plug-in and Options >
Enable. The EAP plug-ins enabled for use with this access
point have a check mark next to them. To not use a plug-
in, select Options > Disable.
Edit SIP profiles
Select Menu > Control panel > Settings and
To edit the EAP plug-in settings, select Options > Edit.
Connection > SIP settings.
To change the priority of the EAP plug-in settings, select
Options > Raise priority to attempt to use the plug-in
before other plug-ins when connecting to the network
with the access point, or Options > Lower priority to
use this plug-in for network authentication after
attempting to use other plug-ins.
Select Options > Edit and from the following:
•
•
•
Profile name — Enter a name for the SIP profile.
Service profile — Select IETF or Nokia 3GPP.
Default destination — Select the destination to use
for the internet connection.
•
•
Default access point — Select the access point to use
for the internet connection.
See the device help for more information on EAP plugins.
Public user name — Enter your user name provided
by your service provider.
Session initiation protocol
(SIP) settings
•
•
•
•
Use compression — Select if compression is used.
Registration — Select the registration mode.
Use security — Select if security negotiation is used.
Proxy server — Enter the proxy server settings for this
SIP profile.
Select Menu > Control panel > Settings and
Connection > SIP settings.
•
Registrar server — Enter the registration server
settings for this SIP profile.
The session initiation protocol (SIP) is used for creating,
modifying, and terminating certain types of
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings for
these sessions. The SIP profile used by default for a
communication session is underlined.
Edit SIP proxy servers
Select Options > New SIP profile or Edit > Proxy
server.
153
Proxy servers are intermediate servers between a
browsing service and its users used by some service
providers. These servers may provide additional security
and speed up access to the service.
You can receive messages from your service provider or
company information management containing
configuration settings for trusted servers. These settings
are automatically saved in Configurations. You may
receive configuration settings for access points,
multimedia, or e-mail services, and instant messaging (IM)
or synchronisation settings from trusted servers.
Select from the following:
•
Proxy server address — Enter the host name or IP
address of the proxy server in use.
To delete configurations for a trusted server, select
Options > Delete. The configuration settings for other
applications provided by this server are also deleted.
•
•
Realm — Enter the proxy server realm.
User name and Password — Enter your user name and
password for the proxy server.
•
Allow loose routing — Select if loose routing is
allowed.
Restrict packet data
•
•
Transport type — Select UDP, Automatic, or TCP.
Port — Enter the port number of the proxy server.
Select Menu > Control panel > Settings and
Connection > APN control.
With the access point control service, you can restrict
packet data connections from your device to certain access
points only. Your SIM card may not support the access
point control service. For more information, contact your
service provider.
Edit registration servers
Select Options > New SIP profile or Edit > Registrar
server.
Select from the following:
To restrict packet data connections from your device,
select Options > Activate restrictions. You need your
PIN2 code to activate and deactivate access point control
or to edit the packet data access points on the control list.
•
Registrar server address — Enter the host name or
IP address of the registrar server in use.
•
•
Realm — Enter the registrar server realm.
User name and Password — Enter your user name and
password for the registrar server.
To add access points that can be used for packet data
connections to the control list, select Options > Add
name manually. To enable connections to an operator-
provided access point, create an empty access point.
•
•
Transport type — Select UDP, Automatic, or TCP.
Port — Enter the port number of the registrar server.
To remove access points from the list, select Options >
Configuration settings
Remove.
Select Menu > Control panel > Settings and
154
Connection > Configurations.
Shortcuts
Home screen
Here are some of the available keyboard shortcuts in your
device. Shortcuts can make the use of the applications
more efficient.
Left selection key Lock and unlock the keypad and
+ *
keyboard.
Call key
0
Open the call log.
General shortcuts
Press and hold to open your
homepage in the Web browser.
General shortcuts
Power key
1
Press and hold to call your voice
Press and hold to switch your device
mailbox.
on and off.
Press once to switch between profiles.
Number key (2– Call a phone number using speed
9)
dialling. You must first activate speed
dialling in Menu > Control panel
andSettings > Phone > Call >
Speed dialling.
*
Press * to turn Bluetooth connectivity
on or off.
#
Press and hold # to turn the Silent
profile on or off.
Web shortcuts for keypad
*
#
0
1
2
3
Ctrl + C
Ctrl + V
Ctrl + X
Ctrl + A
Press Crtl + C to copy text.
Press Ctrl + V to paste text.
Press Ctrl + X to cut text.
Press Ctrl + A to select all.
Zoom in the page.
Zoom out the page.
Go to the homepage.
Open the bookmarks folder.
Open the search dialog.
Return to the previous page.
156
5
8
9
View the active pages.
View the page overview.
6
2
8
3
1
*
Scroll right in the zoomed image.
Scroll up in the zoomed image.
Scroll down in the zoomed image.
Rotate clockwise.
Open the dialog for entering a new
web address.
Web shortcuts for keyboard
+
-
Rotate anticlockwise.
Zoom in the page.
Zoom out the page.
Switch between the full screen size
and normal view.
E-mail
C
D
h
b
f
p
w
o
g
Go to the homepage.
Open the bookmarks folder.
Open the search dialog.
Return to the previous page.
View the active pages.
View the page overview.
Create a new e-mail message.
Remove the selected e-mail
messages.
R
A
Create a reply message to the sender
of the e-mail message.
Create a reply message to the sender
and all other recipients.
Open the dialog for entering a new
web address.
F
Forward the e-mail message.
Gallery
Call key
0
5
7
N
P
O
L
Open the next e-mail message.
Open the previous e-mail message.
Open the selected e-mail message.
Send the image.
Zoom out.
Zoom in.
Change the follow-up status of the
message.
Zoom in. Press twice for the full screen
J
Move up one page in the e-mail
message.
size.
157
4
Scroll left in the zoomed image.
K
T
Move down one page in the e-mail
message.
Move to the first e-mail message in
the mailbox or move up one line in an
e-mail message.
Move to the last e-mail message in the
mailbox or move down one line in an
e-mail message.
D
Open the day view.
Open the week view.
Open the month view.
Open the to-do view.
Add a new meeting.
W
M
T
B
N
M
Y
Open the list of e-mail folders for
moving messages.
Open the list of e-mail folders for
copying messages.
U
Change the read or unread status of
an e-mail message.
Shift key
E
G
V
W
I
Mark or unmark an e-mail message.
Accept a meeting request.
Tentatively accept a meeting request.
Decline a meeting request.
Sort e-mail messages.
Expand and collapse the messages.
Start the synchronisation.
Start the search.
Z
S
Calendar shortcuts for keyboard
Open the agenda view.
A
158
Glossary
Glossary
DTMF tones
Dual-tone multifrequency tones. The
DTMF system is used by touch-tone
telephones. DTMF assigns a specific
frequency, or tone, to each key so that it
can easily be identified by a
3G
3rd generation mobile communications.
A digital system for mobile
communications which aims at global
use and provides increased bandwidth.
3G lets a mobile device user access a wide
variety of services, such as multimedia.
microprocessor. DTMF tones allow you to
communicate with voice mailboxes,
computerised telephony systems, and so
on.
Ad-hoc
operating
mode
A WLAN network mode where two or
more devices connect to each other using
WLAN directly without a WLAN access
point.
EAP
Extensible authentication protocol. EAP
plug-ins are used in wireless networks to
authenticate wireless devices and
authentication servers.
Enhanced GPRS. EGPRS is similar to GPRS,
but it enables faster connection. For
availability and data transfer speed,
contact your service provider.
Cookies
Cookies are little pieces of information,
given by the server to you, to store
information about your visits to a web
site. When you accept cookies, the server
is able to evaluate your use of the web
site, what you are interested in, what you
want to read, and so on.
EGPRS
DNS
Domain name service. An internet service
that translates domain names such as
www.nokia.com into IP addresses such
as 192.100.124.195. Domain names are
easier to remember but this translation is
needed because the internet is based on
IP addresses.
159
GPRS
General packet radio service. GPRS
enables wireless access for mobile
phones to data networks (network
service). GPRS uses packet data
IMAP4
Internet mail access protocol, version 4. A
protocol used for accessing your remote
mailbox.
An access point is where your device
Internet
technology where information is sent in
short bursts of data over the mobile
network. The benefit of sending data in
packets is that the network is occupied
only when sending or receiving data. As
GPRS uses the network efficiently, it
allows for quick data connection setup
and fast data transmission speeds.
access point connects to a network. To use e-mail and
multimedia services or to connect to the
internet and browse web pages, you
must first define internet access points
for these services.
Infrastructure A WLAN network mode where devices are
operating
mode
connected to WLAN using a WLAN access
point.
You must subscribe to the GPRS service.
For availability and subscription to GPRS,
contact your service provider.
PIN
Personal identity number. The PIN code
protects your device from unauthorised
use. The PIN code is supplied with the SIM
card. If the PIN code request is selected,
the code is required each time the device
is switched on. The PIN code must be 4 to
8 digits long.
The PIN2 code is supplied with some SIM
cards. The PIN2 code is required to access
certain functions supported by the SIM
card. The length of the PIN2 code is 4 to
8 digits.
During a voice call, you cannot establish
a GPRS connection, and any existing GPRS
connection is put on hold unless the
network supports dual transfer mode.
GPS
Global positioning system. GPS is a
worldwide radio navigation system.
PIN2
POP3
HSDPA
High-speed downlink packet access.
HSDPA brings high-speed data delivery to
3G terminals, ensuring that users
requiring effective multimedia
capabilities benefit from data rates
previously unavailable because of
limitations in the radio access network.
Post office protocol, version 3. A common
mail protocol that can be used for
accessing your remote mailbox.
HTTP
Hypertext transfer protocol. A document
PUK and PUK2 Personal Unblocking Key. PUK and PUK2
codes are required to change a blocked
PIN code or PIN2 code, respectively. The
length of the code is 8 digits.
transfer protocol used in the web.
160
HTTPS
HTTP over a secure connection.
SIP
Session Initiation Protocol. SIP is used for
creating, modifying, and terminating
certain types of communication sessions
with one or more participants.
USSD
A service request, such as request to
activate an application or configure
various settings remotely, that you can
send to your operator or service provider
with your device.
Voice over IP technology. VoIP is a set of
protocols that facilitate phone calls over
an IP network, such as the internet.
Virtual private network. VPN creates a
secure connection to compatible
corporate intranet and services, such as
e-mail.
Wireless application protocol. WAP is an
international standard for wireless
communication.
command
SSID
Service set identifier. SSID is the name
that identifies the specific WLAN.
VoIP
VPN
Streaming
Streaming audio and video files means
playing them directly from the web
without downloading them first to your
device.
UMTS
Universal Mobile Telecommunications
System. UMTS is a 3G mobile
communication system. Besides voice
and data, UMTS enables audio and video
delivery to wireless devices.
WAP
WEP
When you use your device in GSM and
Wired equivalent privacy. WEP is an
encryption method that encrypts data
before it is transmitted in WLAN.
Wireless local area network.
UMTS networks, multiple data
connections can be active at the same
time, and access points can share a data
connection. In the UMTS network, data
connections remain active during voice
calls. You can, for example, browse the
web faster than previously possible while
simultaneously speaking on the phone.
WLAN
WPA
Wi-Fi Protected Access. Security method
for WLAN.
WPA2
Wi-Fi Protected Access 2. Security method
for WLAN.
UPIN
UPUK
PIN code used in UMTS network.
UPIN Unblocking Key. UPUK code is
required to change a blocked UPIN code
or PIN2 code. The length of the code is 8
digits.
161
USIM
SIM card used in UMTS network.
Troubleshooting
To see frequently asked questions about your device, visit
the product support pages at the Nokia web site.
Q: Why can’t I find my friend’s device while
using Bluetooth connectivity?
Q: What is my lock, PIN, or PUK code?
A: Check that both devices are compatible, have activated
Bluetooth connectivity, and are not in the hidden mode.
Check also that the distance between the two devices is
not over 10 metres (33 feet) and that there are no walls or
other obstructions between the devices.
A: The default lock code is 12345. If you forget or lose the
lock code, contact your device dealer. If you forget or lose
a PIN or PUK code, or if you have not received such a code,
contact your network service provider.
Q: Why can’t I end a Bluetooth connection?
Q: How do I close an application that is not
responding?
A: If another device is connected to your device, you can
end the connection using the other device or by
deactivating Bluetooth connectivity. Select Menu >
Control panel > Connectivity > Bluetooth and
Bluetooth > Off.
A: Press and hold the home key. Scroll to the application,
and press the backspace key to close the application.
Q: Why do images look smudgy?
A: Ensure that the camera lens protection windows are
Q: Why can't I see a WLAN access point even
clean.
though I know I'm within its range?
Q: Why do missing, discoloured, or bright dots
appear on the screen every time I switch on my
device?
A: Check that the Offline profile is not in use in your device.
The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use a
hidden SSID if you know the correct SSID, and have created
a WLAN access point for the network on your Nokia device
A: This is a characteristic of this type of display. Some
displays may contain pixels or dots that remain on or off.
This is normal, not a fault.
Check that the WLAN access point is not on channels 12-13,
as they cannot be associated with.
162
Q: How do I switch WLAN off on my Nokia
device?
Q: Why do I have problems with the security
mode?
A: The WLAN on your Nokia device switches off when you
are not trying to connect, not connected to another access correctly, and that it is the same that the network uses. To
point, or not scanning for available networks. To further
reduce battery consumption, you can specify that your
Nokia device does not scan, or scans less often, for
available networks in the background. WLAN switches off
in between background scans.
check the security mode the network uses, select Menu >
Control panel > Connectivity > Conn. mgr. and Active
data connections > Options > Details.
Check also the following: you have the correct WPA mode
(preshared key or EAP), youhave disabled allEAP types that
are not needed, and all the EAP type settings are correct
(passwords, user names, certificates).
To stop the background scans, select Menu > Control
panel > Settings and Connection > Wireless LAN >
Show WLAN availability > Never. You can still manually
scan for available WLAN networks and connect to WLAN
networks as usual.
Q: Why can’t I select a contact for my message?
A: The contact card does not have a phone number, an
address, or an e-mail address. Select Menu > Contacts,
and edit the contact card.
To increase the background scan interval, select Show
WLAN availability > Yes, and define the interval in Scan
for networks.
Q: The note Retrieving message is shown
briefly. What is happening?
Q: Why can't I browse the web even though the
WLAN connection is working and the IP settings
are correct?
A: The device is trying to retrieve a multimedia message
from the multimedia messaging centre. This note isshown
if you have selected Menu > Messaging and Options >
Settings > Multimedia message > Multimedia
retrieval > Always automatic. Check that the settings
for multimedia messaging are defined correctly and that
there are no mistakes in phone numbers or addresses. See
"Multimedia message settings", p. 52.
A: Check that you have defined the HTTP/ HTTPS proxy
settings correctly in the advanced settings of your WLAN
access point.
Q: How do I check the signal quality of my WLAN
connection? — Select Menu > Control panel >
Connectivity > Conn. mgr. and Active data
Q: How can I end the data connection when the
device starts a data connection again and
again?
connections > Options > Details. If the signal quality
is weak or moderate, you may encounter connection
problems. Try again closer to the access point.
A: The device may be trying to retrieve a multimedia
message from the multimedia message centre. To stop the
device from making a data connection, select Menu >
163
Messaging and Options > Settings > Multimedia
message > Multimedia retrieval > Manual to have the
multimedia messaging centre save messages to be
retrieved later, or Off to ignore all incoming multimedia
messages. If you select Manual, you receive a notification
when there is a new multimedia message that you can
retrieve in the multimedia message centre. If you select
Off, the device does not make any network connections
related to multimedia messaging.
•
•
•
Prevent the device from automatically downloading
new maps in the Maps application. Select Menu >
Applications > GPS > Maps and Options >
Settings > Internet > Use network > Off.
Change the time-out after which the backlight is
switched off. Select Menu > Control panel >
Settings and General > Personalisation >
Display > Light time-out.
Close the applications you do not use. Press and hold
the home key. Scroll to the application, and press the
backspace key to close the application.
To set the device to use a packet data connection only if
you start an application or action that needs it, select
Menu > Control panel > Settings and Connection >
Packet data > Packet data connection > When
needed.
If this does not help, switch the device off, and switch it
on again.
Q: How do I save battery power?
A: Many features in your device increase the demand on
battery power and reduce the battery life time. To save
battery power, do the following:
•
•
Switch off Bluetooth when you do not need it.
Stop the background scans for WLAN. Select Menu >
Control panel > Settings and Connection >
Wireless LAN > Show WLAN availability > Never.
You can still manually scan for available WLAN networks
and connect to WLAN networks as usual.
•
Set the device to use a packet data connection only if
you start an application or action that needs it. Select
Menu > Control panel > Settings and Connection >
Packet data > Packet data connection > When
needed.
164
Accessories
Warning: Use only batteries, chargers, and
accessories approved by Nokia for use with this particular
model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved accessories, please check with
your dealer. When you disconnect the power cord of any
accessory, grasp and pull the plug, not the cord.
165
Battery
Always switch the device off and disconnect the charger
before removing the battery.
Battery and charger
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten
its lifetime. If left unused, a fully charged battery will lose
its charge over time.
information
Your device is powered by a rechargeable battery. The
battery intended for use with this device is BL-4U. Nokia
may make additional battery models available for this
device. This device is intended for use when supplied with
power from the following chargers: AC-8. The exact
charger model number may vary depending on the type
of plug. The plug variant is identified by one of the
following: E, EB, X, AR, U, A, C, or UB.
Always try to keep the battery between 15°C and 25°C
(59°F and 77°F). Extreme temperatures reduce the
capacity and lifetime of the battery. A device with a hot or
cold battery may not work temporarily. Battery
performance is particularly limited in temperatures well
below freezing.
The battery can be charged and discharged hundreds of
times, but it will eventually wear out. When the talk and
standby times are noticeably shorter than normal, replace
the battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved chargers
designated for this device. Use of an unapproved battery
or charger may present a risk of fire, explosion, leakage,
or other hazard.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative
(-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you
carry a spare battery in your pocket or purse. Short-
circuiting the terminals may damage the battery or the
connecting object.
If a battery is being used for the first time or if the battery
has not been used for a prolonged period, it may be
necessary to connect the charger, then disconnect and
reconnect it to begin charging the battery. If the battery
is completely discharged, it may take several minutes
before the charging indicator appears on the display or
before any calls can be made.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of
batteries according to local regulations. Please recycle
when possible. Do not dispose as household waste.
166
Do not dismantle, cut, open, crush, bend, deform,
it to the nearest Nokia authorised service centre or dealer
for assistance. If authenticity cannot be verified, return the
battery to the place of purchase.
puncture, or shred cells or batteries. In the event of a
battery leak, do not allow the liquid to come in contact
with the skin or eyes. In the event of such a leak, flush your
skin or eyes immediately with water, or seek medical help.
Authenticate hologram
Do not modify, remanufacture, attempt to insert foreign
objects into the battery, or immerse or expose it to water
or other liquids.
1. When you look at the hologram on
the label, you should see the Nokia
connecting hands symbol from
one angle and the Nokia Original
Enhancements logo when looking
from another angle.
Improper battery use may result in a fire, explosion, or
other hazard. If the device or battery is dropped, especially
on a hard surface, and you believe the battery has been
damaged, take it to a service centre for inspection before
continuing to use it.
2. When you angle the hologram left,
right, down and up, you should
see 1, 2, 3 and 4 dots on each side
respectively.
Use the battery only for its intended purpose. Never use
any charger or battery that is damaged. Keep your battery
out of the reach of small children.
Nokia battery
authentication
guidelines
What if your battery is not
authentic?
Always use original Nokia batteries for your safety. To
check that you are getting an original Nokia battery,
purchase it from a Nokia authorised service centre or
dealer, and inspect the hologram label using the following
steps:
If you cannot confirm that your Nokia battery with the
hologramon the labelis an authentic Nokia battery, please
do not use the battery. Take it to the nearest Nokia
authorised service centre or dealer for assistance. The use
Successful completion of the steps is not a total assurance of a battery that is not approved by Nokia may be
of the authenticity of the battery. If you have any reason
to believe that your battery is not an authentic, original
Nokia battery, you should refrain from using it, and take
dangerous and may result in poor performance and
damage to your device and its accessories. It may also
167
invalidate any approval or warranty applying to the
device.
To find out more about original Nokia batteries, see
www.nokia.com/battery.
168
Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your warranty
coverage.
•
•
Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
•
Keep the device dry. Precipitation, humidity, and all
types of liquids or moisture can contain minerals that
will corrode electronic circuits. If your device does get
wet, remove the battery, and allow the device to dry
completely before replacing it.
•
•
Use chargers indoors.
Always create a backup of data you want to keep, such
as contacts and calendar notes.
•
•
•
Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be
damaged.
•
To reset the device from time to time for optimum
performance, power off the device and remove the
battery.
Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
These suggestions apply equally to your device, battery,
charger, or any accessory. If any device is not working
properly, take it to the nearest authorised service facility
for service.
Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
•
•
Do not attempt to open the device other than as
Recycle
instructed in this guide.
Always return your used electronic products, batteries,
and packaging materials to a dedicated collection point.
This way you help prevent uncontrolled waste disposal
and promote the recycling of materials. More detailed
information is available from the product retailer, local
waste authorities, national producer responsibility
Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
•
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
169
organisations, or your local Nokia representative. Check
how to recycle your Nokia products at www.nokia.com/
werecycle, or if browsing on a mobile device,
www.nokia.mobi/werecycle.
The crossed-out wheeled-bin symbol on your
product, battery, literature, or packaging reminds
you that all electrical and electronic products,
batteries, and accumulators must be taken to
separate collection at the end of their working life. This
requirement applies in the European Union. Do not
dispose of these products as unsorted municipal waste.
For more environmental information, see the product Eco-
Declarations at www.nokia.com/environment.
170
Additional safety information
Small children
Medical devices
Your device and its accessories may contain small parts.
Keep them out of the reach of small children.
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a
physician or the manufacturer of the medical device to
determine if they are adequately shielded from external
RF energy or if you have any questions. Switch off your
device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could
be sensitive to external RF energy.
Operating environment
This device meets RF exposure guidelines when used
either in the normal use position against the ear or when
positioned at least 2.2 centimetres (7/8 inch) away from
the body. When a carry case, belt clip, or holder is used for
body-worn operation, it should not contain metal and
should position the device the above-stated distance from
your body.
Implanted medical devices
To transmit data files or messages, this device requires a
quality connection to the network. In some cases,
transmission of data files or messages may be delayed
until such a connection is available. Ensure the above
separation distance instructions are followed until the
transmission is completed.
Manufacturers of medical devices recommend that a
minimum separation of 15.3 centimetres (6 inches) should
be maintained between a wireless device and an
implanted medical device, such as a pacemaker or
implanted cardioverter defibrillator, to avoid potential
interference with the medical device. Persons who have
such devices should:
Parts of the device are magnetic. Metallic materials may
be attracted to the device. Do not place credit cards or
other magnetic storage media near the device, because
information stored on them may be erased.
•
Always keep the wireless device more than 15.3
centimetres (6 inches) from the medical device when
the wireless device is turned on.
171
•
Not carry the wireless device in a breast pocket.
•
•
•
Hold the wireless device to the ear opposite the medical this device. More information on accessibility can be found
device to minimise the potential for interference. at www.nokiaaccessibility.com.
Turn the wireless device off immediately if there is any This device has been tested and rated for use with hearing
reason to suspect that interference is taking place.
aids for some of the wireless technologies that it uses.
However, there may be some newer wireless technologies
used in this device that have not been tested yet for use
with hearing aids. It is important to try the different
features of this device thoroughly and in different
locations, using your hearing aid or cochlear implant, to
determine whether you hear any interfering noise. Consult
your service provider about its return and exchange
policies and for information on hearing aid compatibility.
Read and follow the directions from the manufacturer
of their implanted medical device.
If you have any questions about using your wireless device
with an implanted medical device, consult your health
care provider.
Hearing aids
Some digital wireless devices may interfere with some
hearing aids. If interference occurs, consult your service
provider.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid
(antilock) braking systems, electronic speed control
systems, and air bag systems. For more information, check
with the manufacturer, or its representative, of your
vehicle or any equipment that has been added.
Hearing aids
Warning: For hearing aid compatibility, you must
turn off the Bluetooth connectivity.
Only qualified personnel should service the device or
install the device in a vehicle. Faulty installation or service
may be dangerous and may invalidate any warranty that
may apply to the device. Check regularly that all wireless
device equipment in your vehicle is mounted and
Your mobile device model complies with FCC rules
governing hearing aid compatibility. These rules require
an M3 microphone or higher value. The M-value, shown on
the device box , refers to lower radio frequency (RF)
emissions. A higher M-value generally indicates that a
device model has a lower RF emissions level, which may
improve the likelihood that the device will operate with
certain hearing aids. Some hearing aids are more immune
than others to interference. Please consult your hearing
health professional to determine the M-rating of your
hearing aid and whether your hearing aid will work with
operating properly. Do not store or carry flammable
liquids, gases, or explosive materials in the same
compartment as the device, its parts, or accessories. For
vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over
172
the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag
inflates, serious injury could result.
Emergency calls
Using your device while flying in aircraft is prohibited.
Switch off your device before boarding an aircraft. The use
of wireless teledevices in an aircraft may be dangerous to
the operation of the aircraft, disrupt the wireless
telephone network, and may be illegal.
Important: This device operates using radio signals,
wireless networks, landline networks, and user-
programmed functions. If your device supports voice calls
over the internet (internet calls), activate both the internet
calls and the cellular phone. The device will attempt to
make emergency calls over both the cellular networks and
through your internet call provider if both are activated.
Connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless device for
essential communications like medical emergencies.
Potentially explosive
environments
To make an emergency call:
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where
you would normally be advised to turn off your vehicle
engine. Sparks in such areas could cause an explosion or
fire resulting in bodily injury or even death. Switch off the
device at refuelling points such as near gas pumps at
service stations. Observe restrictions on the use of radio
equipment in fuel depots, storage, and distribution areas;
chemical plants; or where blasting operations are in
progress. Areas with a potentially explosive atmosphere
are often, but not always, clearly marked. They include
below deck on boats, chemical transfer or storage facilities
and areas where the air contains chemicals or particles
such as grain, dust, or metal powders. You should check
with the manufacturers of vehicles using liquefied
petroleum gas (such as propane or butane) to determine
if this device can be safely used in their vicinity.
1. If the device is not on, switch it on. Check for adequate
signal strength. Depending on your device, you may
also need to complete the following:
•
•
Insert a SIM card if your device uses one.
Remove certain call restrictions you have activated
in your device.
•
Change your profile from offline or flight profile
mode to an active profile.
2. Press the end key as many times as needed to clear the
display and ready the device for calls.
3. Enter the official emergency number for your present
location. Emergency numbers vary by location.
4. Press the call key.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of
173
an accident. Do not end the call until given permission to
do so.
band. Additional SAR information may be provided under
product information at www.nokia.com.
Certification
information (SAR)
This mobile device meets guidelines for exposure to
radio waves.
Your mobile device is a radio transmitter and receiver. It
is designed not to exceed the limits for exposure to radio
waves recommended by international guidelines. These
guidelines were developed by the independent scientific
organisation ICNIRP and include safety margins designed
to assure the protection of all persons, regardless of age
and health.
The exposure guidelines for mobile devices employ a unit
of measurement known as the Specific Absorption Rate or
SAR. The SAR limit stated in the ICNIRP guidelines is 2.0
watts/kilogram (W/kg) averaged over 10 grams of tissue.
Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest
certified power level in all tested frequency bands. The
actual SAR level of an operating device can be below the
maximum value because the device is designed to use only
the power required to reach the network. That amount
changes depending on a number of factors such as how
close you are to a network base station. The highest SAR
value under the ICNIRP guidelines for use of the device at
the ear is 0.99 W/kg.
Use of device accessories may result in different SAR
values. SAR values may vary depending on national
reporting and testing requirements and the network
174
Index
auto-update for time/date 98
autolock period 145
browsing
intranet 79
802.1x
C
security settings 152
battery
cable 124
cache memory 77
calculator 93
calendar 38
A
access points 147
groups 148
creating entries 38
meeting requests 38
views 39
VPN 140
inserting 14
accessories
blogs 76
settings 144
Bluetooth
calendar key 37
call barring 66
net calls 66
activation keys 139
active notes 93
settings 93
authorising devices 126
pairing 126
call divert 65
caller ID 146
passcode 126
alarm clock 98
alert tones 143
animated screen saver 33
antennas 22
receiving data 125
security 127
calls
sending data 125
bookmarks 77
browser
answering 59
barring net calls 66
call waiting 146
caller ID 146
application manager 135
applications 135
updating 138
conference call 60
making 59
bookmarks 77
security 78
assisted GPS (A-GPS) 82
attachments
making a call from log 73
muting the ringing tone 59
net call alert 146
rejecting 59
multimedia messages 50
audio files
settings 78
details 115
widgets 76
audio messages 47
audio themes 33
175
connections
rejecting with text
message 146
purchase history 80
search settings 80
settings 80
ending 130
selecting type 146
settings 146
PC connection 80
connectors 17
contacts 39, 40
adding ringing tones 40
searching 40
subscriptions 80
downloads 76
DTMF tones 66
speed dialling 65
voice dialling 67
camera
settings 41
e-mail
scenes 102
content
accounts 46
adding attachments 45
automatic retrieval settings 54
connection settings 53
deleting 46
retrieving 21
converting
sequence mode 102
toolbar 101
currencies 95
disconnecting 46
downloading attachments 45
folders 46
video clips 102
measurements 95
currency conversions 95
video settings 103
viewing images 102
general settings 46
out-of-office reply 46
reading 45
D
car kit
remote SIM access 127
cell broadcast 51
settings 54
data connections
synchronisation 139
date
retrieval settings 53
searching 45
settings 144
sending 44
date and time 98
set-up 44
user settings 53
e-mail key 37
chat 54
device memory and memory
e-mail key settings 145
EAP
Clock
device manager 134
dictionary 99
display
settings 98
plug-in settings 152
using an EAP plug-in 153
encrypting
conference calls 60
configuration messages 154
connection methods
Bluetooth 125
changing the look 33
indicators 26
device memory and memory
card 132
settings 142
data cable 124
176
Download!
ending
managing items 79
network connections 130
enhancements
images
See also browser
internet radio
remote SIM access 127
equaliser 114
adding to contacts 104
display background 104
rotating 104
favourites 118
listening 117
F
sending 104
searching for stations 118
settings 118
feeds, news 76
file manager 94
indicators 26
station directory 118
inserting
intranet
battery 14
browsing 79
downloading 104
flash files 115
fixed dialling 132
J
instant messaging 54
modifying your personal
preferences 56
J2ME Java application
G
gallery 104
games 119
GPRS
K
key store 134
keyguard 19
keypad
recording chats 56
retrieving IM contact lists 56
searching for groups and
users 57
settings 150
GPS
position requests 84
GPS (global positioning
system) 82
lock settings 145
locking 19
server settings 57
starting a new conversation 55
using IM groups 57
views 55
tones 143
keys 17
WEP keys 152
L
connecting 19
settings 32
landmarks 84
language
internet call services
managing 64
settings 143
HSDPA 124
licenses 139
location information 82
lock code 131, 145
locking
blocking contacts 64
making 64
I
settings 65
IM
177
device 131
internet connection 74
See instant messaging
maps
device autolock 145
keypad 19, 145
receiving 49
replying to 49
settings 52
browsing 86
log 72
measurements
converting 95
multitasking 41
Music player
adding numbers to Contacts 72
deleting 72
making a call 73
playlists 112
sending messages 73
settings 73
transferring music 113
music player
logos
memory
playing 112
clearing 30
N
web cache 77
M
memory card
N-Gage 119
ejecting 16
making a call 59
Maps 85
settings 122
inserting 15
N-Gage views 119
navigation tools 82
net calls
locking 131
driving 89
passwords 131
menu 25
Favourites 88
finding locations 87
indicators 86
alert settings 146
barring 66
message reader 46
selecting voice 47
messages 43
network
internet settings 90
keypad shortcuts 92
map settings 91
settings 147
call rejection messages 146
messaging
news feeds 76
Nokia Map Loader 91
notes 99
network positioning 86
O
operator
folders 43, 44
saved items 88
saving locations 88
sending locations 88
settings 90
selecting 147
Mini Map 75
original settings 145
MMS (multimedia message
service) 47
out-of-office reply 46
modem 80
traffic information 89
travel guides 90
updating 91
P
multimedia messages 47
attachments 50
creating presentations 49
packet data
178
restricting 154
walking 89
Push to talk
settings 150
packet data connection
access point settings 149
page overview 75
pairing
contacts 40
creating a channel 71
in profiles 31
vibrating alert 143
settings 72
push to talk 68, 69
answering a PTT call 70
callback requests 70
channels 70
S
devices 126
saving
passcode 126
files 29
display 142
making a one-to-one call 69
network groups 70
responding to a channel
settings 29
screen saver 33, 142
scroll key lights 143
Search 28
results 28
PIN code
searching 28
changing 145
talking to a channel 71
service providers 29
settings 29
playing
messages 46
searching
Q
video and audio 114
podcasting 110
directories 111
searching 111
available WLANs 130
contacts 40
Quickoffice 95
security
R
Bluetooth 127
device and SIM card 145
memory card 131
web browser 78
security module 134
sending
settings 111
radio 116
positioning
listening 116
settings 145
settings 117
presentations 49
profiles
stations 116
RealPlayer
files 29
settings 115
using Bluetooth 125
sensor settings 144
service commands 51
service messages 50
settings 54
remote database search 40
remote lock 131
restoring original settings 145
ringing tones 143
3-D 33
creating 31
customising 31, 32
selecting ringing tones 31
proxy settings 149
PTT
settings
access points 147, 148
accessories 144
active notes 93
179
See push to talk
SIM card
advanced WLAN 151
applications 155
calls 146
SIP 153
slide 145
inserting 14
text messages 51
time 144
text messages 48
SIP
camera 103
cell broadcast 54
certificate 134
clock 98
tones 143
creating profiles 153
editing profiles 153
video centre 110
WLAN 150
editing proxy servers 153
editing registration servers 154
settings 153
slide
display 142
e-mail key 145
e-mail retrieval 54
e-mail user 53
EAP plug-ins 152
FM radio 117
settings 145
SMS (short message service) 47
software applications 135
software update 137
points 149
WLAN security 151
settings wizard 25
Share online 105
account settings 107
accounts 105
speech 47
speed dialling 65
switching device on and off 16
Symbian applications 135
synchronisation of data 139
GPRS 150
internet calls 65
internet radio 118
language 143
activating services 105
one-click upload 106
Outbox 106
T
tabs 29
log 73
talking theme 67
network 147
text
changing size 142
predictive input 28
writing 27
packet data 150
positioning 145
printer 97
subscribing 105
text messages
messages on SIM card 48
sending 47
shared video 61
shortcuts 156
RealPlayer 115
restoring 145
settings 51
side keys 17
themes
signal strength 26
SIM access profile 127
scroll key lights 143
sensor settings 144
service messages 54
audio 33
180
changing 33
downloading 33
time
video sharing
WLAN
settings 144
accepting invitation 63
sharing live video 62
sharing video clips 62
virtual private network
use in applications 141
voice aid
802.1x security settings 152
time and date 98
time zone settings 98
tones 143
access points 129
advanced settings 151
availability 129
settings 143
MAC address 128, 150
searching for networks 130
security settings 151
settings 150
toolbar
camera 101
See talking theme
settings 68
WEP keys 152
WPA security settings 152
WLAN wizard 129
world clock 98
U
voice mail
UPIN code
writing 27
calling 60
changing 145
changing number 60
volume 30
USB data cable 124
Z
VPN
V
access points 140
use in applications 141
Zip manager 96
vibrating alert 143
video
playing 102
W
video calls
wallpaper 104
web browser
making a call 61
switching to voice call 61
browsing pages 74
web connection 74
my videos 109
Welcome 25
WEP
keys 152
video clips
security settings 151
widgets 76
details 115
playing 114
181
wireless keyboard 99
shared 61
|