Oregon Scientific Radio Controlled Wireless Weather Station C8266B User Manual

C8266B-PD09535M (DCF) -EN  
Size: A4  
9. RESET key:  
RECEPTION OF RADIO CONTROLLED  
TIME SIGNAL  
Press it to reset all values to default values.  
In case of malfunction, the unit may be required  
to reset.  
The time and date are radio-controlled. The current  
time and date are automatically synchronized with the  
signal transmitted from Germany (DCF).  
10. UP key:  
RADIO CONTROLLED  
WIRELESS WEATHER STATION  
MODEL:JW102  
In normal time mode, press it to switch between  
M-D (Month-Date) and D-M (Date-Month)  
formats.  
When used for the first time (after inserting the  
batteries or pressing “RESET” key), the clock will start  
to receive the signals and the reception display will  
flash in 8 seconds.  
In time setting mode, press it to increase the  
setting values.  
Press and hold it for 3 seconds to receive the  
RC signal for reception testing.  
USERMANUAL  
DAYLIGHT SAVINGS TIME (DST)  
11. DOWN key:  
Press it to switch 12/24-hour format.  
In time setting mode, press it to decrease the  
setting values.  
The clock has been programmed to automatically  
switch when the daylight savings time is in effect.Your  
clock will show “DST” during the summe.  
EN  
BRIEF INTRODUCTION  
12. SYNC key:  
SIGNAL STRENGTH INDICATOR  
Press and hold it for 3 seconds to turn on/off the  
signal reception of transmitter (433 MHz)  
manually.  
Thank you for your purchase of this delicate Wireless  
Weather Station. The utmost care has gone into the  
design and manufacture of your clock. Please read  
these instructions carefully and keep the manual well  
for future reference.  
The signal indicator displays signal strength in 4 levels.  
Wave segment flashing means time signals are being  
received. The signal quality could be classified into 4  
types:  
13. °C/°F key:  
Press it to switch between Celsius and Fahrenheit.  
The multifunctional weather station is equipped with  
many functions providing thorough weather information  
to you. The receiver unit has a clear, easy-to-read  
display that shows the indoor temperature, moon phase,  
time, month, date as well as the temperature measured  
and transmitted from the remote sensors. It is able to  
receive and display readings from up to 3 remote  
sensors.  
No signal quality  
Weak signal quality  
14. WALL-MOUNTING HOLDER:  
Use it to support the main unit in the wall  
mounting.  
Acceptable signal quality  
Excellent signal quality  
15. BATTERY COMPARTMENT:  
Accommodates 4 AA size batteries.  
Note:  
16. TABLE STAND:  
1.  
The unit will automatically search for the time  
signal at 2:00 (3:00 or 4:00 is also available if  
the signal was not received at 2:00), 8:00, 14:00  
and 20:00 each day.  
Always place the unit away from interfering  
sources such as TV set, computer etc.  
Avoid placing the unit on or next to metal plates.  
Closed area such as airport, basement, tower  
block or factory is not recommended.  
Do not start reception in moving articles such  
as vehicles or trains.  
Use it to stand the clock on the desktop.  
The 433 MHz technology means no wire installation is  
required and you can place the sensors anywhere you  
like.  
TRANSMITTER  
2.  
With radio controlled function, the current time and  
date are automatically synchronized with the time signal  
transmitted from Germany(DCF).  
3.  
4.  
7
2
MAIN FEATURES:  
5.  
3
1
4
WEATHER STATION  
6
5
8
433 MHz  
THERMO SENSOR  
7
4
1
2
3
5
6
7
1. LCD indicator:  
Displays the current temperature monitored by  
TIME AND CALENDAR MANUAL SETTING  
the remote unit.  
If you are out of reach of the Radio Controlled  
transmitter or if the reception is not reachable, the  
time and calendar can be set manually. As soon as the  
signal of transmitter is received again, the clock will  
automatically synchronize with the exact time and  
calendar.  
2. CHANNEL slide switch:  
8
Assign the transmitter to Channel 1, 2 or 3.  
3. RESET key:  
Press it to restart the transmitter and return all  
values to default values.  
1.  
Press and hold “TIME” key for 2 seconds until  
the Year digit flashes.  
Press “UP” or “DOWN” key to change its value.  
Press “TIME” key once until the Month digit  
flashes.  
Press “UP” or “DOWN” key to change its value.  
Repeat the above operations (point 3, 4) to set  
the below items in this order: Date > Hour >  
Minute > Second > Day language > +/-23 hours  
time difference.  
Press “TIME” key to save and exit the setting  
mode, or let it exit automatically 30 seconds  
later without pressing any key.  
O
O
UP  
DOWN  
SYNC  
C
/
F
4. °C/°F key:  
2.  
3.  
Switches between Celsius and Fahrenheit.  
9
10 11 12 13  
5. BATTERY COMPARTMENT:  
4.  
5.  
Accommodates 2 AA size batteries.  
14  
6. BATTERY DOOR  
7. WALL-MOUNTING HOLDER:  
6.  
Use it to support the transmitter on the wall.  
O
O
U
P
D
O
W
N
S
Y
N
C
C
/
F
8. TABLE STAND:  
15  
16  
Use it to stand the transmitter on the desktop.  
Note:  
1.  
Through “+/-23 hours time difference” setting,  
the precise time of another area will be shown.  
RECEPTION OF TRANSMITTER SIGNAL  
OPERATING THE WEATHER STATION  
2.  
The  
5
languages weekday settings are  
1. CLOCK WINDOW:  
represented by the below abbreviations:  
Displays time, year, signal strength indicator,  
GB=English  
ES=Spanish IT=Italian.  
FR=French  
DE=German  
1.  
Remove the battery door and insert 4 AA size  
batteries into the battery compartment as per  
the polarity information marked on the battery  
compartment.  
daylight savings time (DST), alarm icons.  
2. CALENDAR AND MOON PHASE WINDOW:  
Displays the month, date, day of the week, alarm  
time as well as the moon phase.  
English  
Spanish  
DOM  
LUN  
MAR  
MIE  
French  
DIM  
German  
SON  
MON  
DIE  
Italian  
DOM  
LUN  
MAR  
MER  
GIO  
2.  
3.  
4.  
Replace the battery door.  
SUN  
MON  
TUE  
WED  
THU  
FRI  
Press “RESET” key to restart the clock.  
Press “CHANNEL” key to set the desired  
channel.  
LUN  
MAR  
MER  
JEU  
3. WEATHER FORECAST AND TEMPERATURE  
WINDOW:  
Shows the current indoor & outdoor temperature,  
the maximum/minimum temperature as well as  
the current channel.  
MIT  
Note:  
DON  
FRE  
SAM  
JUE  
1.  
When the transmitter signal is received, the  
VEN  
SAB  
VEN  
SAM  
VIE  
icon “  
” will be shown and flash for 3 times.  
SAT  
SAB  
4. TIME key:  
2.  
3.  
The building material and position of receiver  
and transmitter affect the effective range. So  
try various locations to obtain the best result.  
Place the units away from metal objects and  
electrical appliances to minimize the interference.  
Position the receiver within the effective  
transmission range: 30 meters in usual  
circumstances.  
In normal time mode, press it to enter alarm1  
and alarm2 time mode.  
ALARM TIME SETTING  
Press and hold it for 2 seconds to enter the  
normal time setting mode.  
1.  
2.  
In normal time mode, press “TIME” key to enter  
the alarm1 (alarm2) time mode.  
Press and hold “ALARM ON/OFF” key for 2  
seconds until the alarm Hour digit flashes.  
Press “UP” or “DOWN” key to change its value.  
Press “ALARM ON/OFF” key once until the alarm  
Minute digit flashes.  
Press “UP” or “DOWN” key to change its value.  
Press “ALARM ON/OFF” key to save and exit  
the setting mode, or let it exit automatically 30  
seconds later without pressing any key.  
In normal time setting mode, press it to step the  
setting items.  
5. CHANNEL key:  
3.  
4.  
Press it to switch among channel 1, 2 and 3.  
Press and hold it for 2 seconds to show the  
channels automatically, and press it once again  
to exit the automatic display mode.  
OPERATING THE TRANSMITTER  
5.  
6.  
1.  
2.  
Remove the transmitter from the stand and  
open the battery door.  
Insert 2 AA size batteries into the battery  
compartment as per the polarity information  
marked on the battery compartment.  
Slide “CHANNEL” switch to synchronize the  
channel with receiver.  
6. MAX/MIN key:  
Press it to show the maximum and minimum  
temperature records.  
Note:  
3.  
4.  
5.  
6.  
Press and hold it for 3 seconds to delete the  
max. and min. records.  
1.  
The alarm will be automatically turned on when  
you set the alarm time.  
The dual-alarm (alarm1 & alarm2) design of this  
unit provides you with more convenience, and  
you can set two-alarm time if needed.  
Press “RESET” key individually by a pin to  
confirm the channel setting.  
7. SNOOZE key:  
2.  
Press “°C/°F” key to select the temperature  
unit.  
Press it to stop the current alarm when it is  
sounding.  
Replace the battery door.  
8. ALARM ON/OFF key:  
Note:  
In normal time mode, press it to turn on/off alarm1  
& alarm2.  
USING ALARM & TEMPERATURE  
PRE-ALARM FUNCTIONS  
1.  
To receive the transmitter signal, the channels  
of receiver and transmitter must be  
synchronized.  
In alarm time mode, press it to turn on/off alarm  
and temperature pre-alarm.  
1.  
2.  
Set the alarm time as the above section with  
alarm1 (alarm2) turned on when you set the alarm  
time.  
In alarm1 (alarm2) time mode, press “ALARM  
ON/OFF” key once to turn on the temperature  
pre-alarm with the icon “ ” displayed.  
In alarm time mode, press and hold it for 2  
seconds to enter the alarm time setting mode.  
In alarm time setting mode, press it to step the  
setting items.  
Press it once to stop the current alarm when it is  
sounding.  
2.  
3.  
The icon “ ” will flash for 3 times when the  
signal is being transmitted.  
Once the channel is assigned to a transmitter,  
you can only change it by removing the batteries  
or resetting the unit.  

Yamaha CRW4261t NB User Manual
Toshiba HDD1744 User Manual
Sylvania SRCD182 User Manual
Sprint Nextel Cell Phone 9630 User Manual
Sony USM128ED User Manual
Siemens Gigaset 150 User Manual
Seagate Momentus ST9160821SB User Manual
Samsung SGH N628 User Manual
Radio Shack 63 1419 User Manual
Pyramid Technologies TimeTrax Clock User Manual