Nokia E66 User Manual

E66 User Guide  
9207000  
Issue 2  
Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains  
any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties,  
damages and liabilities of Nokia's licensors.  
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for  
details, and availability of language options.  
Export controls  
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion  
contrary to law is prohibited.  
FCC/INDUSTRY CANADA NOTICE  
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry  
Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service  
facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or  
modifications not expressly approved by Nokia could void the user's authority to operate this equipment.  
9207000/Issue 2 EN  
Contents  
Transfer content between devices...........................24  
View transfer log........................................................24  
Synchronise, retrieve, and send data.......................24  
Common actions in several applications....................24  
Display indicators..........................................................25  
Volume control..............................................................27  
Memory..........................................................................27  
Free memory...............................................................27  
Memory card...............................................................27  
MicroSDHC.................................................................27  
Use a memory card..................................................28  
Write text.......................................................................28  
Traditional text input.................................................28  
Predictive text input..................................................28  
Change the writing language...................................29  
Further information......................................................29  
Safety.........................................................11  
About your device.........................................................11  
Network services...........................................................12  
Battery removing..........................................................12  
E66 in brief.................................................13  
Key features...................................................................13  
Keys and parts...............................................................14  
Key moves......................................................................15  
Automatic display rotation.......................................15  
Silence the device.......................................................15  
Scroll key lights...........................................................16  
Slide function..............................................................16  
Set up your device......................................17  
Insert the SIM card and battery...................................17  
Eject the memory card..................................................19  
Connect the headset.....................................................19  
Attach the wrist strap...................................................19  
Antennas........................................................................19  
New from Eseries.......................................30  
Access tasks quickly......................................................30  
Home screen..................................................................30  
Navigate in the home screen....................................30  
Work on the home screen.........................................30  
Switch home screens.................................................31  
One-touch keys..............................................................31  
Home key....................................................................31  
Contacts key................................................................32  
Calendar key................................................................32  
E-mail key....................................................................32  
Nokia Calendar for Eseries............................................32  
Calendar views............................................................32  
Get started.................................................21  
First start-up..................................................................21  
Welcome........................................................................21  
Settings wizard.............................................................22  
Home screen..................................................................22  
Menu...............................................................................23  
Transfer content from other devices .........................23  
View calendar information........................................33  
Create calendar entries..............................................33  
Search podcasts..........................................................42  
Podcasting settings....................................................43  
Calendar settings........................................................34 Music player...................................................................43  
Nokia Contacts for Eseries............................................34  
Add contacts...............................................................34  
Contact groups............................................................34  
Search for contacts.....................................................34  
Manage contacts directories.....................................35  
Add ringing tones for contacts.................................35  
Play a song or a podcast episode.............................43  
Playlists.......................................................................44  
Nokia Music Store ......................................................44  
Transfer music from PC..............................................44  
Transfer with Windows Media Player......................44  
Preset frequency settings..........................................45  
Change contacts settings...........................................35 Share online...................................................................45  
Multitasking...................................................................35  
Share images online..................................................45  
Recorder.........................................................................46  
Record a sound clip....................................................46  
Play a recording..........................................................46  
Recorder settings.......................................................46  
Personalisation..........................................36  
Profiles...........................................................................36  
Select ringing tones......................................................36  
Customise profiles.........................................................37 Gallery............................................................................46  
Personalise the home screen.......................................37  
Change the display theme............................................38  
Download a theme........................................................38  
Work with media files and folders...........................47  
View images................................................................47  
Manage image files....................................................47  
3-D ringing tones..........................................................38 RealPlayer......................................................................47  
Play video clips and stream links..............................48  
Camera...........................................................................39  
Capture an image.......................................................39  
Send audio files and video clips...............................48  
View information about a media clip......................48  
RealPlayer settings.....................................................49  
Scenes..........................................................................39 Flash player....................................................................49  
Capture images in a sequence..................................40  
Manage flash files.......................................................49  
View captured image.................................................40 Radio..............................................................................49  
Record videos.............................................................40  
Play a video clip..........................................................40  
Image settings............................................................41  
Video settings.............................................................41  
Listen to the radio......................................................49  
View visual content....................................................50  
Saved stations.............................................................50  
Radio settings.............................................................50  
Nokia Podcasting..........................................................41 Internet radio................................................................50  
Play and manage podcasts........................................41  
Directories...................................................................42  
Listen to internet radio stations...............................51  
Search for stations.....................................................51  
Save stations...............................................................51 E-mail messages............................................................61  
Internet radio settings...............................................52  
Nokia Email.................................................................62  
Mail for Exchange.......................................................63  
Regular POP or IMAP e-mail.......................................64  
Set up POP or IMAP e-mail......................................64  
Connect to a remote mailbox.................................64  
Read and reply to e-mail........................................65  
Write and send e-mail.............................................65  
Delete messages......................................................65  
Subfolders in your remote e-mail..........................66  
Internet......................................................53  
Web................................................................................53  
Connection security....................................................53  
Browse the web..........................................................53  
Bookmarks..................................................................54  
Clear the cache............................................................54  
Feeds and blogs..........................................................54  
End a connection........................................................54 Text messages...............................................................66  
Web settings...............................................................54  
Browse the intranet .....................................................55  
Download!......................................................................55  
Manage items.............................................................55  
Subscriptions..............................................................55  
Write and send text messages..................................66  
Sending options for text messages..........................66  
Text messages on the SIM card.................................67  
View picture messages..............................................67  
Forward picture messages........................................67  
Download! search.......................................................56 Multimedia messages...................................................67  
Purchase history.........................................................56  
Download! settings....................................................56  
Internet access points..................................................56  
Create and send multimedia messages...................68  
Receive and reply to multimedia messages............68  
Create presentations..................................................69  
View presentations....................................................69  
View and save multimedia attachments.................70  
Forward a multimedia message...............................70  
Send a sound clip.......................................................70  
Sending options for multimedia messages.............70  
Advanced internet access point settings for packet  
data (GPRS)..................................................................57  
Set up an access point for WLAN manually..............57  
Advanced access point settings for WLAN...............58 Instant messaging........................................................71  
Connect PC to web.........................................................58  
Define IM settings.......................................................71  
Start a conversation...................................................71  
IM groups....................................................................72  
Block users..................................................................72  
IM application settings..............................................73  
Messaging..................................................60  
Messaging folders.........................................................60  
Organise messages.......................................................61  
Message reader.............................................................61 Special message types..................................................73  
Speech............................................................................61  
Edit the voice properties ..........................................61  
Service messages........................................................73  
Send service commands............................................74  
Cell broadcast................................................................74 Voice commands...........................................................86  
Messaging settings.......................................................74  
Text message settings...............................................74  
Multimedia message settings...................................75  
E-mail account settings.............................................76  
Make a call...................................................................86  
Launch an application................................................87  
Change profiles...........................................................87  
Voice command settings...........................................87  
Connection settings.................................................76 Push to talk....................................................................87  
User settings............................................................76  
Retrieval settings.....................................................76  
Automatic retrieval settings...................................77  
Service message settings..........................................77  
Cell broadcast settings...............................................77  
Other settings.............................................................77  
PTT settings................................................................88  
Log in to PTT service..................................................88  
Make a PTT call...........................................................88  
Created PTT calls.........................................................88  
Manage PTT contacts.................................................88  
Create a PTT channel..................................................89  
Exit PTT........................................................................89  
Log..................................................................................89  
Call and data registers...............................................89  
Monitor all communications.....................................89  
Call and send messages from Log.............................90  
Log settings................................................................90  
Phone.........................................................79  
Voice calls.......................................................................79  
Answer a call...............................................................79  
Make a call...................................................................79  
Make a conference call...............................................80  
Video calls......................................................................80  
Make a video call........................................................80  
Travelling...................................................91  
Receive a video sharing invitation...........................81 Positioning settings......................................................92  
Net calls..........................................................................81 Maps...............................................................................92  
Create a net call profile..............................................82  
Connect to the net call service..................................82  
Make net calls.............................................................83  
Net call service settings.............................................83  
Speed dialling................................................................83  
Call divert.......................................................................84  
Call barring.....................................................................84  
Bar net calls...................................................................85  
Send DTMF tones...........................................................85  
About Maps.................................................................93  
Move on a map...........................................................93  
Display indicators.......................................................93  
Find locations.............................................................94  
Plan a route.................................................................94  
Walk to your destination...........................................94  
Drive to your destination..........................................95  
Traffic information.....................................................95  
Travel guides..............................................................96  
Voice mail......................................................................85 GPS data.........................................................................96  
Voice aid.........................................................................85  
Use GPS data...............................................................96  
Landmarks.....................................................................97 Data cable....................................................................105  
Create a landmark......................................................97 Infrared........................................................................106  
Edit landmarks............................................................97 Bluetooth.....................................................................106  
Landmark categories.................................................97  
Receive landmarks.....................................................98  
About Bluetooth.......................................................106  
Send and receive data with Bluetooth..................107  
Pair devices...............................................................107  
Security tips..............................................................108  
Nokia Office Tools......................................99  
Active notes...................................................................99 SIM access profile........................................................109  
Create and edit notes ................................................99 Wireless LAN................................................................109  
Settings for Active notes............................................99  
Calculator.....................................................................100  
File manager................................................................100  
WLAN connections...................................................110  
See WLAN availability..............................................110  
WLAN wizard............................................................110  
Quickoffice...................................................................100 Modem.........................................................................111  
Work with files.........................................................101 Connection manager..................................................112  
Converter.....................................................................101  
Convert measurements...........................................101  
Set base currency and exchange rate....................101  
Zip manager................................................................101  
View and end active connections...........................112  
Search for WLAN.......................................................112  
Security and data management..............113  
PDF reader...................................................................102 Lock the device............................................................113  
Printing........................................................................102 Memory card security.................................................113  
Print files ..................................................................102 Encryption....................................................................114  
Printer settings.........................................................103  
Encrypt device memory or memory card...............114  
Decrypt device memory or memory card..............114  
Clock.............................................................................103 Fixed dialling...............................................................114  
Alarm clock................................................................103 Certificate manager....................................................115  
World clock...............................................................103  
Clock settings............................................................103  
View certificate details............................................115  
Certificate trust settings..........................................116  
Notes............................................................................104 Security modules.........................................................116  
Write and send notes...............................................104  
View and edit security modules.............................116  
Nokia Wireless Keyboard...........................................104 Back up data................................................................117  
Remote configuration................................................117  
Connectivity.............................................105  
Fast downloading.......................................................105  
Nokia PC Suite..............................................................105  
Application manager..................................................118  
Install applications...................................................118  
Installation settings.................................................119  
Java security settings...............................................119  
Activation keys............................................................120  
Use activation keys..................................................120  
Data synchronisation..................................................121  
Create a synchronisation profile.............................121  
Select applications to synchronise.........................122  
Synchronisation connection settings.....................122  
Mobile VPN...................................................................122  
Manage VPN..............................................................123  
Create VPN access points.........................................123  
Use a VPN connection in an application................123  
Barcode reader............................................................124  
Access points............................................................130  
Packet data (GPRS) settings....................................130  
WLAN settings..........................................................131  
Advanced WLAN settings.........................................131  
WLAN security settings............................................131  
WEP security settings...............................................131  
WEP key settings......................................................132  
802.1x security settings..........................................132  
WPA security settings..............................................132  
Wireless LAN plugins................................................132  
EAP plug-ins...........................................................133  
Use EAP plug-ins....................................................133  
Session initiation protocol (SIP) settings..............133  
Edit SIP profiles........................................................133  
Edit SIP proxy servers...............................................134  
Edit registration servers..........................................134  
Net call settings........................................................134  
Configuration settings.............................................134  
Restrict packet data.................................................135  
Settings....................................................125  
General settings..........................................................125  
Personalisation settings..........................................125  
Display settings.....................................................125  
Standby mode settings.........................................126  
Tone settings.........................................................126  
Language settings.................................................126 Application settings....................................................135  
Shortcuts..................................................136  
Settings for One-touch keys.................................127  
Date and time settings............................................127 General shortcuts........................................................136  
Slide settings............................................................127  
Glossary....................................................138  
Troubleshooting......................................142  
Enhancements..........................................145  
Battery and charger information.............146  
Enhancement settings.............................................127  
Common enhancement settings..........................127  
E-mail key settings...................................................128  
Security settings.......................................................128  
Device and SIM card security................................128  
Restore original settings.........................................128  
Telephone settings.....................................................129  
Call settings...............................................................129 Battery and charger information..............................146  
Network settings......................................................129 Nokia battery authentication guidelines.................147  
Connection settings....................................................130  
Authenticate hologram...........................................147  
What if your battery is not authentic?...................147  
Care and maintenance.............................149  
Disposal........................................................................150  
Additional safety information.................151  
Small children..............................................................151  
Operating environment..............................................151  
Medical devices...........................................................151  
Implanted medical devices.....................................151  
Hearing aids..............................................................152  
Vehicles........................................................................152  
Potentially explosive environments.........................152  
Emergency calls...........................................................153  
CERTIFICATION INFORMATION (SAR)...........................153  
Index........................................................155  
Safety  
Read these simple guidelines. Not following them may  
be dangerous or illegal. Read the complete user guide  
for further information.  
WATER-RESISTANCE  
Your device is not water-resistant. Keep it  
dry.  
SWITCH ON SAFELY  
Do not switch the device on when wireless  
phone use is prohibited or when it may  
cause interference or danger.  
About your device  
The wireless device described in this guide is approved  
for use on the (E)GSM 850, 900, 1800, and 1900  
networks, and UMTS 900/2100 HSDPA networks.  
Contact your service provider for more information  
about networks.  
INTERFERENCE  
All wireless devices may be susceptible to  
interference, which could affect  
performance.  
SWITCH OFF IN RESTRICTED AREAS  
When using the features in this device, obey all laws  
and respect local customs, privacy and legitimate  
rights of others, including copyrights.  
Follow any restrictions. Switch the device off  
in aircraft, near medical equipment, fuel,  
chemicals, or blasting areas.  
Copyright protection may prevent some images, music,  
and other content from being copied, modified, or  
transferred.  
QUALIFIED SERVICE  
Only qualified personnel may install or  
Your device supports several methods of connectivity.  
Like computers, your device may be exposed to viruses  
and other harmful content. Exercise caution with  
messages, connectivity requests, browsing, and  
downloads. Only install and use services and other  
software from trustworthy sources that offer adequate  
security and protection against harmful software, such  
as applications that are Symbian Signed or have passed  
the Java Verified™ testing. Consider installing antivirus  
repair this product.  
ENHANCEMENTS AND BATTERIES  
Use only approved enhancements and  
batteries. Do not connect incompatible  
products.  
11  
   
and other security software on your device and any  
connected computer.  
all networks; other networks may require that you  
make specific arrangements with your service provider  
before you can use the network services. Using  
Your device may have preinstalled bookmarks and links  
for third-party internet sites. You may also access other  
third-party sites through your device. Third-party sites  
are not affiliated with Nokia, and Nokia does not  
endorse or assume liability for them. If you choose to  
access such sites, you should take precautions for  
security or content.  
network services involves transmission of data. Check  
with your service provider for details about fees in your  
home network and when roaming on other networks.  
Your service provider can give you instructions and  
explain what charges will apply. Some networks may  
have limitations that affect how you can use network  
services. For instance, some networks may not support  
all language-dependent characters and services.  
Warning: To use any features in this device, other  
than the alarm clock, the device must be switched on.  
Do not switch the device on when wireless device use  
may cause interference or danger.  
Your service provider may have requested that certain  
features be disabled or not activated in your device. If  
so, these features will not appear on your device menu.  
Your device may also have a special configuration such  
as changes in menu names, menu order, and icons.  
Contact your service provider for more information.  
The office applications support common features of  
Microsoft Word, PowerPoint, and Excel (Microsoft Office  
2000, XP, and 2003). Not all file formats can be viewed  
or modified.  
This device supports WAP 2.0 protocols (HTTP and SSL)  
that run on TCP/IP protocols. Some features of this  
device, such as e-mail, browsing, and multimedia  
messaging (MMS), require network support for these  
technologies.  
Remember to make back-up copies or keep a written  
record of all important information stored in your  
device.  
When connecting to any other device, read its user  
guide for detailed safety instructions. Do not connect  
incompatible products.  
Battery removing  
The images in this guide may differ from your device  
Always switch the device off and disconnect the  
charger before removing the battery.  
display.  
Network services  
To use the device you must have service from a wireless  
service provider. Many of the features require special  
network features. These features are not available on  
12  
   
E66 in brief  
Model number: Nokia E66-1 (RM-343).  
Hereinafter referred to as Nokia E66.  
Access your e-mail while on the move.  
Stay up-to-date and plan your meetings with  
Calendar.  
Key features  
Your new Eseries device helps you manage your  
business and personal information in and out of office.  
Some of the key features are highlighted here:  
Manage your business partners and free time  
friends with the new Contacts application.  
Make calls using voice over IP services with  
Switch from business to personal mode.  
Internet tel..  
Browse the internet, find blogs and receive  
Connect to WLAN with WLAN wiz..  
news feeds with Web.  
Listen to music with Music player.  
View documents, spreadsheets, and  
presentations with Quickoffice.  
Get podcasts to your device with Podcasting.  
Add new applications to your device with  
Download!  
Find points of interest with Maps.  
13  
   
7 — Microphone  
Keys and parts  
8 — Camera (video calls only)  
9 — Navi™ scroll key, hereafter referred to as the scroll  
key. Press the scroll key to enter a selection, to scroll  
left, right, up, and down on the display. A long press  
left, right, up, or down accelerates the scrolling.  
10 — End key. Press the end key to reject a call, end  
active calls and held calls, and with a long keypress, end  
data connections.  
11 — Backspace key. Press the key to delete items.  
12 — Shift key. When writing text, press and hold the  
key and select the text with the scroll key. Press this  
key for a few seconds to toggle between the Silent and  
General profiles.  
13 — Charger connector  
1 — Power key  
2 — Earpiece  
3 — Light sensor  
4 — Selection key. Press the selection key to perform  
the function shown above it on the display.  
5 — Call key  
1 — Volume up key  
6 — Press the key for a few seconds to switch on  
Bluetooth connectivity. When writing text, press the  
key and select More symbols to access special  
characters.  
2 — Voice key. Press the voice key to mute and unmute  
the active call. This key is also used in the Voice  
commands and Push to talk applications.  
14  
   
3 — Volume down key  
4 — Capture key  
accordingly and changes to full screen. To display the  
control and status panes, press either selection key.  
The image changes to full screen in RealPlayer,  
browser, and image viewer.  
5 — Release button  
6 — Headset connector  
7 — Micro-USB port  
8 — Infrared port  
To turn off the automatic display rotation or changing  
to full screen, select Menu > Tools > Settings >  
General > Personalisation > Display > Display  
rotation or Turn to full view.  
1 — Home key  
2 — Contacts key  
3 — Calendar key  
4 — E-mail key  
Silence the device  
To set calendar and clock alarms to snooze and to  
silence incoming calls, turn the device face down.  
Key moves  
You can also silence the device by tapping it twice. To  
turn on silencing by tapping, select Menu > Tools >  
Settings > General > Personalisation > Tones >  
Tap to silence > On.  
Your device rotates the display automatically when you  
move it and responds to tapping and turning. Scroll key  
lights notify you of events, and the slide enables  
answering and ending calls and locking the keypad.  
To turn off silencing by tapping or  
turning, select Menu > Tools >  
Settings > General >  
Automatic display rotation  
Personalisation > Tones > Tap  
to silence or Turn to silence.  
In all applications, the screen rotates automatically  
from portrait to landscape when you turn the device to  
the left. For example, if you are browsing the web and  
turn the device to the left, the image rotates  
15  
         
To change the slide settings, select Menu > Tools >  
Scroll key lights  
Settings > General > Slide handling.  
When you receive a message or miss a call, the scroll  
key starts blinking to indicate the event. When the  
display light turns off, the scroll key starts blinking  
slowly.  
The keypad of your device locks automatically to  
prevent the keys from being accidentally pressed. To  
change the period after which the keypad is locked,  
select Menu > Tools > Settings > General >  
Security > Phone and SIM card > Keypad autolock  
period.  
To set the length of time for blinking for missed events  
or to select of which events you want to be notified,  
select Menu > Tools > Settings > General >  
Personalisation > Notification light.  
To turn off slow blinking, select Menu > Tools >  
Profiles and a profile. Select Personalise >  
Breathing light.  
Slide function  
When the device or keypad is locked, calls may be  
possible to the official emergency number  
programmed into your device.  
To open or close the full-size keypad, push the slide up  
or down.  
To lock the keypad, close the slide. To unlock  
the keypad, open the slide.  
Tip: To unlock the keypad without  
opening the slide, press the left and  
then the right selection key.  
To answer a call, open the slide. To end the  
call, close the slide, unless you have a headset  
connected to the device, or you select  
Options before closing the keypad.  
16  
       
Set up your device  
Set up your E66 following these instructions.  
Insert the SIM card and  
battery  
1. With the back of the device facing you, press the  
release buttons (1) and slide the back cover off (2).  
3. Insert the SIM card. Make sure that the contact area  
on the card is facing the connectors on the device  
and that the bevelled corner is facing the top of the  
device.  
2. If the battery is inserted, lift the battery in the  
direction of the arrow to remove it.  
4. Insert the battery. Align the contacts of the battery  
with the corresponding connectors on the battery  
compartment and insert in the direction of the  
arrow.  
17  
     
Your battery has been precharged at the factory, but  
the charging levels may vary. To reach the full  
operation time, charge the battery until it has been  
fully charged according to the battery level indicator.  
Tip: If you have old compatible Nokia chargers,  
you can use them with the Nokia E66 by  
attaching the CA-44 charger adapter to the old  
charger. The adapter is available as a separate  
enhancement.  
5. Slide the back cover back to place.  
Insert the memory  
card  
Use a memory card to save the memory on your device.  
You can also back up information from your device to  
the memory card.  
Memory card may already be inserted in your device.  
Memory cards are also available as separate  
enhancements.  
Charge the battery  
1. With the back of the device facing you, press the  
1. Connect a compatible charger to a wall outlet.  
release buttons (1) and slide the back cover off (2).  
2. Connect the power  
cord to the device. If  
the battery is  
completely  
discharged, it may  
take a while before  
the charging indicator  
starts scrolling.  
3. When the battery is  
2. Insert the memory card in the slot with the contact  
area first. Make sure that the contact area is facing  
the connectors on the device.  
18  
fully charged, disconnect the charger from the  
device, then from the wall outlet.  
       
Connect the headset  
Warning: When you use the headset, your ability  
to hear outside sounds may be affected. Do not use the  
headset where it can endanger your safety.  
Connect the compatible headset to the headset  
connector of your device.  
3. Push the card in until it locks into place.  
4. Close the back cover.  
Eject the memory card  
Important: Do not remove the memory card in  
the middle of an operation when the card is being  
accessed. Removing the card in the middle of an  
operation may damage the memory card as well as the  
device, and data stored on the card may be corrupted.  
Attach the wrist strap  
Thread the wrist strap as shown, and tighten it.  
1. Press the power key briefly, and select Remove  
memory card.  
2. Press the release buttons and slide off the back  
cover.  
3. Press the end of the memory card to release it from  
the memory card slot.  
4. Close the back cover.  
Antennas  
Your device may have internal and external antennas.  
As with any radio transmitting device, avoid touching  
19  
           
the antenna area unnecessarily while the antenna is  
transmitting or receiving. Contact with such an  
antenna affects the communication quality and may  
cause the device to operate at a higher power level  
than otherwise needed and may reduce the battery  
life.  
20  
Get started  
After you have set up your device, switch it on and start configure some settings automatically. You can also  
to explore what is new in Eseries.  
contact your service provider for the correct settings.  
You can switch the device on without inserting the SIM  
card. The device starts up in the offline mode, and you  
cannot use the network-dependent phone functions.  
To switch the device off, press and hold the power key.  
First start-up  
1. Press and hold the power key.  
2. If the device asks for a PIN code or  
lock code, enter the code, and select  
OK.  
Welcome  
3. When prompted, enter the country  
in which you are located and the  
current date and time. To find your  
country, enter the first letters of the  
country name. It is important to  
select the correct country, because  
scheduled calendar entries may  
change if you change the country  
later and the new country is located  
on a different time zone. The  
When you switch on your device for the first time, the  
Welcome application opens. Select from the following:  
Tutorial provides information about your device  
and shows you how to use it.  
Switch enables you to transfer content, such as  
contacts and calendar entries, from a compatible  
Nokia device. See "Transfer content between  
devices", p. 24.  
E-mail settings helps you configure e-mail settings.  
Welcome application opens.  
Sett. wizard helps you configure various settings.  
4. Select from the various options, or  
See "Settings wizard", p. 22.  
Exit to close the application.  
Operator contains a link to your operator's home  
To configure the various settings in your device, use  
the wizards available on the home screen and in the  
Settings wizard application. When you switch the  
device on, it may recognise the SIM card provider and  
portal.  
To open the Welcome application later, select Menu >  
21  
Help > Welcome.  
         
The available items may vary between regions.  
Operator — Configure operator-specific settings  
such as MMS, internet, WAP, and streaming settings.  
E-mail setup — Configure e-mail settings.  
Push to talk — Configure push-to-talk settings.  
Video sharing — Configure video sharing settings.  
Settings wizard  
Select Menu > Tools > Sett. wizard.  
If you are not able to use Settings wizard, visit the  
Settings wizard configures your device for settings  
based on your network operator information. To use  
these services, you may have to contact your service  
provider to activate a data connection or other  
services.  
Nokia phone settings web site.  
Home screen  
From the home screen you can quickly access features  
that you use the most, and see at a glance any missed  
calls or new messages.  
The availability of the different settings items in  
Settings wizard depends on the features of the device,  
SIM card, wireless service provider, and the availability  
of the data in the Settings wizard database.  
If Settings wizard is not available from your service  
provider, it may not appear in the menu of your device.  
To start the wizard, select Start. When you use the  
wizard for the first time, you are guided through the  
settings configuration. If there is no SIM card inserted,  
you need to select the home country of your service  
provider, and your service provider. If the country or  
service provider suggested by the wizard is not correct,  
select the correct one from the list. If the settings  
configuration is interrupted, the settings are not  
defined.  
To access the main view of the Settings wizard after  
the wizard has finished the settings configuration,  
select OK.  
You can define two separate home screens for different  
purposes, such as one screen to show your business e-  
mail and notifications, and another to show your  
personal e-mail. This way, you do not have to see  
business-related messages outside office hours.  
In the main view, select Options and from the  
following:  
22  
     
mark is placed beside the application. Scroll to a new  
Menu  
location, and select OK.  
To move an application to a different folder, scroll to  
Select Menu.  
the application you want to move, and select  
The menu is a starting point  
from which you can open all  
applications in the device or  
on a memory card.  
Options > Move to folder, the new folder, and OK.  
To download applications from the web, select  
Options > Download applications.  
The menu contains  
applications and folders,  
which are groups of similar  
applications. All  
Transfer content from  
applications you install in  
the device yourself are by  
default saved in the  
other devices  
Select Menu > Tools > Switch.  
Installations folder.  
You can transfer content, such as contacts, from a  
compatible Nokia device to your new Eseries device  
using different connectivity methods. The type of  
content that can be transferred depends on the device  
model. If the other device supports synchronisation,  
you can also synchronise data between the two devices  
or send data from this device to the other device.  
To open an application,  
scroll to it, and press the  
scroll key.  
To view the applications in a list, select Options >  
Change Menu view > List. To return to the grid view,  
select Options > Change Menu view > Grid.  
When you transfer data from your previous device, it  
may require youto insert the SIM card. Your new Eseries  
device does not need a SIM card when transferring  
data.  
To view the memory consumption of different  
applications and data stored on the device or memory  
card and to check the amount of free memory, select  
Options > Memory details.  
Content is copied from the memory of the other device  
to the corresponding location in your device. Copying  
time depends on the amount of data to be transferred.  
You can also cancel and continue later.  
To create a new folder, select Options > New  
folder.  
To rename a new folder, select Options > Rename.  
The necessary steps for data transfer may vary  
To rearrange the folder, scroll to the application you  
depending on your device, and whether you have  
want to move, and select Options > Move. A check  
23  
     
interrupted data transfer earlier. The items that you  
can transfer vary depending on the other device.  
Synchronise, retrieve, and  
send data  
If you have previously transferred data to your device  
with the Switch application, select from the following  
icons in the Switch main view:  
Transfer content between  
devices  
Synchronise data with a compatible device if the  
other device supports synchronisation. With  
synchronisation, you can keep the data up-to-date in  
both devices.  
To connect the two devices, follow the instructions on  
the display. For some device models, the Switch  
application is sent to the other device as a message. To  
install Switch on the other device, open the message,  
and follow the instructions on the display. On your new  
Eseries device, select the content you want to copy  
from the other device.  
Retrieve data from the other device to your new  
Eseries device.  
Send data from your new Eseries device to your  
other device.  
After the data transfer, you can save the shortcut with  
the transfer settings to the main view to repeat the  
same transfer later. To edit the shortcut, select  
Options > Shortcut settings.  
Common actions in  
several applications  
View transfer log  
A transfer log is shown after every transfer.  
You can find the following actions in several  
applications:  
To view the transfer details, scroll to the transferred  
item in the log, and select Options > Details.  
To change the profile, or switch off or lock the device,  
press the power key briefly.  
To view the log of a previous transfer, scroll to a  
transfer shortcut, if available, in the main view, and  
select Options > View log.  
Any unresolved transfer conflicts are also displayed in  
the log view. To start solving conflicts, select  
Options > Solve conflicts.  
24  
               
If an application consists of  
several tabs (see figure),  
open a tab by scrolling right  
or left.  
To select an object (for example, an attachment in a  
document) scroll to the object so that square markers  
appear on each side of the object.  
To save the settings that you  
Display indicators  
have configured in an  
application, select Back.  
The device is being used in a UMTS network  
(network service).  
To save a file, select  
Options > Save. There are  
different saving options  
depending on the  
The battery charge level. The higher the bar,  
the stronger the charge in the battery.  
application you use.  
To send a file, select  
You have one or more unread messages in the  
Inbox folder in Messaging.  
Options > Send. You can send a file in an e-mail or  
multimedia message, or using different connectivity  
methods.  
You have received new e-mail in the remote  
mailbox.  
To copy, press and hold the shift key, and select the text  
with the scroll key. Press and hold the shift key, and  
select Copy. To paste, scroll to where you want to paste  
the text, press and hold the shift key, and select  
Paste. This method may not work in applications that  
have their own copy and paste commands.  
There are messages waiting to be sent in the  
Outbox folder in Messaging.  
You have one or more missed phone calls.  
The keys of the device are locked.  
An alarm is active.  
To select different items, such as messages, files, or  
contacts, scroll to the item you want to select. Select  
Options > Mark/Unmark > Mark to select one item  
or Options > Mark/Unmark > Mark all to select all  
items.  
Tip: To select almost all items, first select  
Options > Mark/Unmark > Mark all, then  
select the items you do not want, and Options >  
Mark/Unmark > Unmark.  
You have selected the Silent profile, and the  
device does not ring for an incoming call or  
message.  
25  
   
Bluetooth is active.  
You have set the device to scan for WLANs, and  
a WLAN is available.  
Data is being transmitted using Bluetooth  
connectivity. When the indicator is blinking,  
your device is trying to connect with another  
device.  
A WLAN connection is active in a network that  
does not have encryption.  
A WLAN connection is active in a network that  
has encryption.  
An infrared connection is active. If the indicator  
blinks, your device is trying to connect to the  
other device, or the connection has been lost.  
Your device is connected to a computer with a  
USB data cable.  
A GPRS packet data connection is available  
(network service). If the icon is , the  
connection is active. If the icon is , the  
connection is on hold.  
The second phone line is being used (network  
service).  
All calls are forwarded to another number. If  
you have two phone lines, a number indicates  
the active line.  
An EGPRS packet data connection is available  
(network service). If the icon is , the  
connection is active. If the icon is , the  
connection is on hold.  
A headset is connected to the device.  
A UMTS packet data connection is available  
(network service). If the icon is , the  
connection is active. If the icon is , the  
connection is on hold.  
The connection to a headset with Bluetooth  
connectivity has been lost.  
A hands-free car kit is connected to the device.  
A loopset is connected to the device.  
A text phone is connected to the device.  
Your device is synchronising.  
High-speed downlink packet access (HSDPA) is  
supported and available (network service). The  
icon may vary between regions. If the icon is  
, the connection is active. If the icon is , the  
connection is on hold.  
26  
After you install applications to a compatible memory  
card, installation files (.sis, .sisx) remain in the device  
memory. The files may use large amounts of memory  
and prevent you from storing other files. To maintain  
sufficient memory, use Nokia PC Suite to back up  
installation files to a compatible PC, then use the file  
manager to remove the installation files from the  
device memory. If the .sis file is a message attachment,  
delete the message from the Messaging inbox.  
You have an ongoing push-to-talk connection.  
Your push-to-talk connection is in the do not  
disturb mode, because the ringing type setting  
of your device is set to Beep once or Silent, or  
you have an incoming or ongoing phone call.  
In this mode, you cannot make PTT calls.  
Volume control  
Memory card  
If you cannot use a memory card in your device, you  
may have the wrong type of memory card, the card may  
not be formatted for your device, or the card has a  
corrupted file system. Your Nokia device supports the  
FAT16 and FAT32 file system for memory cards.  
To adjust the earpiece volume during a phone call or  
the volume of the media applications, use the volume  
keys.  
Select Menu > Tools > Memory.  
Memory  
There are two types of memory into which you can save  
data or install applications: device memory and  
memory card.  
MicroSDHC  
This device uses microSD and microSDHC  
memory cards.  
To ensure interoperability, use only  
Free memory  
compatible memory cards with this device.  
Check the compatibility of a memory card with  
its manufacturer or provider. Other memory  
cards than microSD and microSDHC cards are not  
compatible with this device. Using an incompatible  
memory card may damage the memory card as well as  
the device, and data stored on the incompatible card  
may be corrupted.  
To see how much memory is currently in use, how  
much free memory remains, and how much memory is  
consumed by each data type, select Menu >  
Options > Memory details > Phone memory or  
Memory card.  
Tip: To ensure that you have adequate memory,  
transfer data regularly to a memory card or  
computer, or use File manager to delete files you  
no longer need.  
27  
               
To switch between the upper and lower case mode and  
Use a memory card  
the number mode, press #.  
To format a memory card for your device, select  
Options > Format memory card. When a memory  
card is formatted, all data on the card is lost  
To erase a character, press the backspace key. Press and  
hold the backspace key to erase more than one  
character.  
permanently. Consult your retailer to find out if you  
must format the memory card before you can use it.  
To access the most common punctuation marks, press  
the 1 key. Press 1 repeatedly to reach the desired  
punctuation mark.  
To change the name of the memory card, select  
Options > Memory card name.  
To add special characters, press *. Scroll to the desired  
character and press the scroll key.  
Write text  
To insert a space, press 0. To move the cursor to the  
next line, press 0 three times.  
The input methods provided in the device may vary  
according to different sales markets.  
To switch between the different character cases, press  
#.  
Traditional text input  
Predictive text input  
is shown on the top right of the display when  
you are writing text using traditional text input.  
1. To activate predictive text input, press # twice  
quickly. This activates predictive text input for all  
and  
indicate the selected case.  
editors in the device. The indicator  
is shown  
indicates that the first letter of the sentence is written  
in uppercase and all the other letters are automatically  
on the display.  
2. To write the desired word, press 2-9. Press each key  
written in lowercase.  
mode.  
indicates the number  
only once for one letter.  
3. When you have finished writing the word and it is  
correct, scroll right to confirm it, or press 0 to add  
a space.  
To write text with the keypad, press a number key  
2-9 repeatedly until the desired character appears.  
There are more characters available for a number key  
than are printed on the key. If the next letter is located  
on the same key as the present one, wait until the  
cursor appears, and enter the letter.  
If the word is not correct, press * repeatedly to view  
the matching words the dictionary has found.  
If the ? character is shown after the word, the word  
you intended to write is not in the dictionary. To  
add a word to the dictionary, select Spell, enter the  
28  
To insert a number, press and hold the number key.  
             
word (up to 32 letters) using traditional text input, To browse the help topics and conduct searches, select  
and select OK. The word is added to the dictionary. Menu > Help > Help. You can select categories for  
When the dictionary is full, the new word replaces  
which you want to see instructions. Select a category,  
such as Messaging, to see what instructions (help  
topics) are available. While you are reading the topic,  
scroll left or right to see the other topics in that  
category.  
the oldest added word.  
Write the first half of a compound word; to confirm it,  
scroll right. Write the last part of the compound word.  
To complete the compound word, press 0 to add a  
space.  
To switch between the application and help, press and  
hold the home key.  
Tutorial  
To switch predictive text input off for all editors in the  
device, press # twice quickly.  
The tutorial provides you information about your  
device and shows you how to use it. Select Menu >  
Help > Tutorial.  
Change the writing  
language  
When you are writing text, you can change the writing  
language. For example, if you press the 6 key  
repeatedly to reach a specific character, changing the  
writing language gives you access to characters in a  
different order.  
If you are writing text using a non-Latin alphabet and  
want to write Latin characters, for example e-mail or  
web addresses, you may need to change the writing  
language. To change the writing language, select  
Options > Writing language, and a writing  
language that uses Latin characters.  
Further information  
Instructions in your device  
To read instructions for the current view of the open  
29  
application, select Options > Help.  
     
New from Eseries  
Your new Eseries device contains new versions of the  
Calendar and Contacts applications, as well as a new  
home screen.  
Navigate in the home screen  
To access the home screen, press the home key briefly.  
The home screen consists of:  
application shortcuts (1)  
To access an application  
quickly, scroll to its  
shortcut and press the  
scroll key.  
Access tasks quickly  
Whenever you see the  
icon on the home screen, or  
in the Contacts or Calendar  
applications, scroll right to  
access a list of available  
actions. To close the list,  
scroll left.  
information area (2) To  
check an item displayed  
in the information area,  
scroll to the item and  
press the scroll key.  
When you navigate in these  
applications, to go back to  
the previous level, scroll left.  
notifications (3) To view  
the notifications, scroll to  
a box. Each box is only visible if there are items in it.  
To hide the boxes, press the backspace key.  
Work on the home screen  
Home screen  
1. To search for contacts in the home screen, start  
entering the contact's name. When entering the  
characters, press each key once. For example, to  
enter "Eric", press 3742. The device suggests  
matching contacts.  
From the home screen you can quickly access features  
that you use the most, and see at a glance any missed  
calls or new messages.  
30  
           
To switch between the alphabetic and number  
modes, select Options > Alpha mode or Number  
mode.  
To change from one home screen mode to another,  
scroll to and press the scroll key.  
2. In the list of suggested contacts, scroll to the  
desired contact. This feature may not be available  
in all languages.  
One-touch keys  
With the One-touch keys you can access applications  
and tasks quickly. Each key has been assigned an  
application and a task. To change these, select Menu >  
Tools > Settings > General > Personalisation >  
One-touch keys. Your network operator may have  
assigned applications to the keys, in which case you  
cannot change them.  
To call the contact, press the call key.  
To set off the contact search, select Options > Contact  
search off.  
To check your received messages, scroll to the message  
box in the notification area. To read a message, scroll  
to it and press the scroll key. To access other tasks,  
scroll right.  
To view your missed calls, scroll to the calls box in the  
notification area. To return a call, scroll to a call and  
press the call key. To send a text message to a caller,  
scroll to a call, scroll right and select Send text msg.  
from the list of available actions.  
1 — Home key  
2 — Contacts key  
3 — Calendar key  
4 — E-mail key  
To listen to your voice mail, scroll to the voice mail box  
in the notification area. Scroll to the desired voice  
mailbox and press the call key to call it.  
Switch home screens  
You can define two home screen modes for different  
purposes, such as one mode to show your business e-  
mail and notifications, and another to show your  
personal e-mail. This way, you do not have to see  
business-related messages outside office hours.  
Home key  
To access the home screen, press the home key briefly.  
Press the home key briefly again to access the menu.  
To view the list of active applications, press the home  
key for a few seconds. When the list is open, press the  
home key briefly to scroll the list. To open the selected  
application, press the home key for a few seconds, or  
Your operator may have set you a third home screen  
with operator-specific items.  
31  
         
press the scroll key. To close the selected application,  
press the backspace key.  
Nokia Calendar for  
Leaving applications running in the background  
increases the demand on battery power and reduces  
the battery life.  
Eseries  
Select Menu > Office > Calendar.  
Create and view scheduled events and appointments,  
and switch between different calendar views.  
Contacts key  
To open the Contacts application, press the contacts  
key briefly.  
Calendar views  
To create a new contact, press the contacts key for a  
You can switch between the following views:  
few seconds.  
Month view shows the current month and the  
calendar entries of the selected day in a list.  
Calendar key  
Week view shows the events for the selected week  
in seven day boxes.  
To open the Calendar application, press the calendar  
key briefly.  
Day view shows the events for the selected day  
grouped into time slots according to their starting  
time.  
To create a new meeting entry, press the calendar key  
for a few seconds.  
To-do view shows all to-do items.  
Agenda view shows the events for the selected day  
E-mail key  
in a list.  
To open your default mailbox, press the e-mail key  
briefly.  
To change the view, select Options > Change view  
and the desired view.  
To create a new e-mail message, press the e-mail key  
Tip: To open the week view, scroll to a week  
for a few seconds.  
number and press the scroll key.  
Tip: To switch between views, press *.  
To move to the next or the previous day in month,  
week, day, and agenda views, scroll right or left.  
32  
                 
To change the default view, select Options >  
To create a calendar entry, scroll to a date, select  
Settings > Default view.  
Options > New entry and the entry type.  
Tip: To create a meeting entry, start entering  
the subject.  
View calendar information  
Create meeting, memo, anniversary, or to-do  
In the month view, calendar  
entries are marked with a  
triangle. Anniversary entries  
are also marked with an  
exclamation mark. The  
entries of the selected day  
are shown in a list.  
entries  
1. Enter the subject.  
2. For meeting entries, enter the start and end times,  
or select All-day event.  
3. For meeting and memo entries, enter the start and  
end dates. For anniversary entries, enter the date  
and for to-do entries, enter the due date.  
To open calendar entries,  
open a calendar view, scroll  
to an entry, and press the  
scroll key.  
4. For meeting entries, enter the location.  
5. For meeting, anniversary, and to-do entries, you  
can set an alarm.  
6. For recurring meeting entries, set the recurrence  
time.  
Create calendar entries  
7. For to-do entries, set the priority. To set the priority  
You can create the following types of calendar entries:  
for meeting entries, select Options > Priority.  
Meeting entries remind you of events that have a  
8. For memo, anniversary, and to-do entries, define  
how the entry is handled during synchronisation.  
Select Private to hide the entry from viewers if the  
calendar is available online, Public to make the  
entry visible to viewers, or None to not copy the  
entry to your computer.  
specific date and time.  
Memo entries are related to the whole day but not  
to a specific time of the day.  
Anniversary entries remind you of birthdays and  
special dates. They refer to a certain day but not a  
specific time of the day. Anniversary entries are  
repeated every year.  
9. Enter a description.  
To send the entry, select Options > Send.  
To-do entries remind you of a task that has a due  
date but not a specific time of the day.  
33  
       
Calendar settings  
Add contacts  
Select Options > Settings.  
Select Options > New contact, and enter the  
contact's information.  
To change the alarm tone, select Calendar alarm  
tone.  
To copy a contact's information from the memory card,  
select Options > Copy > From memory card.  
To change the view displayed when you open the  
calendar, select Default view.  
To change the first day of the week, select Week starts  
Contact groups  
on.  
Select each contact you want to add to the contact  
group, press # to mark it, select Options > Group >  
Add to group > Create new group > Group  
name, and enter a name for the group.  
To change the week view title, select Week view  
title and Week number or Week dates.  
If you want to make conference calls to the group,  
Nokia Contacts for  
define also the following:  
Conf. service number — Enter the conference call  
service number.  
Eseries  
Conf. service ID — Enter the conference call ID  
number.  
Select Menu > Communic. > Contacts.  
Save and update contact information, such as phone  
numbers, home addresses, or e-mail addresses of your  
contacts. You can add a personal ringing tone or a  
thumbnail image to a contact. You can also create  
contact groups, which allow you to communicate with  
several contacts at the same time, and send contact  
information (business cards) to or receive it from  
compatible devices.  
Conf. service PIN — Enter the conference call PIN  
code number.  
To make a conference call to the group, select the  
group, scroll right, and select Call conf. service from  
the list of available actions.  
Search for contacts  
Whenever you see the  
icon, scroll right to access a  
To search for contacts, start entering the contact's  
name in the search field.  
list of available actions. To close the list, scroll left.  
To switch to the predictive search mode, select  
Options > Activate predict. search.  
34  
             
To search for contacts in the predictive search mode,  
enter the beginning of the contact's name in the search  
field. To move to the next hit with the same  
Change contacts settings  
Select Options > Settings.  
alphabetical combination of letters, press *.  
To change the way the contacts' names are displayed,  
select Name display.  
To select which contacts directory opens when you  
open the Contacts application, select Default contact  
list.  
Manage contacts directories  
If you have installed contacts directories, to change the  
contacts directory, scroll to the top of the names list,  
press the scroll key, and select from the list of available  
directories.  
Multitasking  
To organise contacts directories, select Options >  
Organise contact lists and a directory. Scroll up to  
move it to the desired place.  
You can have several applications open at the same  
time. To switch between active applications, press and  
hold the home key, scroll to an application, and press  
the scroll key. To close the selected application, press  
the backspace key.  
Add ringing tones for  
contacts  
Example: When you have an active phone call  
and want to check your calendar, press the home  
key to access the menu, and open the Calendar  
application. The phone call remains active in the  
background.  
You can set a ringing tone for a contact or contact  
group. The ringing tone sounds when the contact calls  
you.  
To add a ringing tone for contacts, open a contact,  
Example: When you are writing a message and  
want to check a web site, press the home key to  
access the menu, and open the Web application.  
Select a bookmark or enter the web address  
manually, and select Go to. To return to your  
message, press and hold the home key, scroll to  
the message and press the scroll key.  
select Options > Ringing tone and a ringing tone.  
To add a ringing tone for contact groups, select a  
contact group, Options > Group > Ringing tone and  
a ringing tone.  
To remove the assigned ringing tone, select Default  
tone from the list of ringing tones.  
35  
               
Personalisation  
You can personalise your device by adjusting the  
various tones, background images, and screen savers,  
for example.  
or from restarting the GPS or FM radio, so comply with  
any applicable safety requirements when establishing  
and using these features.  
To delete a profile that you created, select Options >  
Delete profile. You cannot delete the predefined  
profiles.  
Profiles  
Select Menu > Tools > Profiles.  
You can adjust and customise the ringing tones, alert  
tones, and other device tones for different events,  
environments, or caller groups. The profile currently in  
use is shown at the top of the display on the home  
screen. However, if the active profile is General, only  
today's date is shown.  
Select ringing tones  
To set a ringing tone for a profile, select Options >  
Personalise > Ringing tone. Select a ringing tone  
from the list, or select Download sounds to open a  
bookmark folder containing a list of bookmarks for  
downloading tones using the browser. Any  
To create a new profile, select Options > Create  
downloaded tones are saved to Gallery.  
new, and define the settings.  
To play the ringing tone for a selected contact group  
only, select Options > Personalise > Alert for, and  
select the desired group. Phone calls coming from  
outside that group have a silent alert.  
To customise a profile, select a profile and Options >  
Personalise.  
To change a profile, select a profile and Options >  
Activate. The Offline profile prevents your device from  
accidentally switching on, sending or receiving  
To change the message tone, select Options >  
Personalise > Message alert tone.  
messages, or using wireless LAN, Bluetooth, GPS, or FM  
radio; it also closes any internet connection that may  
be in operation when the profile is selected. The Offline  
profile does not prevent you from establishing a  
wireless LAN or Bluetooth connection at a later time,  
36  
         
Warning tones — Set the warning tones on or off.  
This setting also affects the tones of some games  
and Java applications.  
Customise profiles  
Select Options > Personalise, and define the  
Alert for — You can set the device to ring only upon  
calls from phone numbers that belong to a selected  
contact group. Phone calls coming from outside that  
group have a silent alert.  
following:  
Ringing tone — Select a ringing tone from the list,  
or select Download sounds to open a bookmark  
folder containing a list of bookmarks for  
downloading tones using the browser. If you have  
two alternate phone lines in use, you can specify a  
ringing tone for each line.  
Profile name — You can give a name to a new  
profile or rename an existing profile. The General  
and Offline profiles cannot be renamed.  
Video call tone — Select a ringing tone for video  
calls.  
Personalise the home  
Say caller's name — When you select this option  
and someone from your contacts list calls you, the  
device sounds a ringing tone that is a combination  
of the spoken name of the contact and the selected  
ringing tone.  
screen  
Select Menu > Tools > Modes.  
To change the name of the current home screen, select  
Ringing type — Select how you want the ringing  
tone to alert.  
Mode name.  
Ringing volume — Select the volume level of the  
ringing tone.  
To select which applications and notifications you  
want to see on the home screen, select Home screen  
applications.  
Message alert tone — Select a tone for received  
text messages.  
To change the theme of the home screen currently in  
E-mail alert tone — Select a tone for received e-  
mail messages.  
use, select Theme.  
Vibrating alert — Select whether you want the  
device to vibrate when you receive a call.  
Breathing light — Select whether you want the  
scroll key to start blinking slowly when the display  
light turns off.  
To change the background image of the home screen  
currently in use, select Wallpaper.  
To change from one home screen to another, select  
Switch mode.  
Keypad tones — Set the volume level of the device  
keypad tones.  
37  
       
To enable three-dimensional sound effects for ringing  
tones, select 3-D ringing tone effects > On. Not all  
ringing tones support 3–D effects.  
Change the display  
theme  
To change the 3–D effect that is applied to the ringing  
tone, select Sound trajectory and the desired effect.  
Select Menu > Tools > Themes.  
To modify the 3–D effect, select from the following:  
To change the theme used in all applications, select the  
Trajectory speed — Select the speed at which  
sound moves from one direction to another. This  
setting is not available for all effects.  
General folder.  
To change the theme used in the main menu, select the  
Menu view folder.  
Reverberation — To adjust the amount of echo,  
select the desired effect.  
To change the theme for a particular application, select  
Doppler effect — Select On to have the ringing  
tone sound higher when you are closer to your  
device, and lower when you are farther away. This  
setting is not available for all effects.  
the application-specific folder.  
To change the background image of the home screen,  
select the Wallpaper folder.  
To select an animation for the screen saver, select the  
To listen to the ringing tone with the 3–D effect, select  
Power saver folder.  
Options > Play tone.  
To adjust the volume of the ringing tone, select  
Menu > Tools > Profiles > Options >  
Personalise > Ringing volume.  
Download a theme  
To download a theme, select General or Menu view >  
Download themes. Enter the link from which you  
want to download your theme. Once the theme is  
downloaded, you can preview, activate, or edit it.  
To preview a theme, select Options > Preview.  
To start using the selected theme, select Options >  
Set.  
3-D ringing tones  
38  
Select Menu > Media > 3-D tones.  
           
Media  
Your device contains a variety of media applications for  
both business and leisure time use.  
Switch between the video mode and the image  
mode.  
For more information, see the extended user guide on  
Select the scene.  
the web.  
Select the flash mode (images only).  
Activate the self-timer (images only).  
Activate the sequence mode (images only).  
Select a colour effect.  
Camera  
Select Menu > Media > Camera.  
Show or hide the viewfinder grid (images only).  
Adjust the white balance.  
Adjust the exposure compensation (images only).  
Capture an image  
Your device supports an image capture resolution of  
up to 2048 x 1536 pixels. The image resolution in this  
guide may appear different.  
The available options vary depending on the capture  
mode and view you are in. The settings return to the  
default after you close the camera.  
To capture an image, use the display as a viewfinder  
and press the scroll key. The device saves the image in  
Gallery.  
Scenes  
To zoom in or out before capturing an image, scroll up  
or down. This function is available only when the  
toolbar is not shown.  
A scene helps you to find the right colour and lighting  
settings for the current environment. The settings of  
each scene have been set according to a certain style  
or environment.  
The toolbar provides you with shortcuts to different  
items and settings before and after capturing an image  
or recording a video. Scroll to a toolbar item and press  
the scroll key.  
To change the scene, select Scene modes in the  
toolbar.  
39  
           
To make your own scene, scroll to User defined, and  
Send — Send the image to compatible devices.  
Send to caller — Send the image to the caller  
during an active call.  
select Options > Change.  
To copy the settings of another scene, select Based on  
Post to — Send the image to your compatible  
scene mode and the desired scene.  
online album (network service).  
To activate your own scene, scroll to User defined,  
To use the image as the background image, select  
press the scroll key, and select Select.  
Options > Set as wallpaper.  
To add the image to a contact, select Options > Set  
Capture images in a  
sequence  
as contact call img. > Assign to contact.  
Record videos  
To capture several images in a sequence, if enough  
memory is available, select Sequence mode in the  
toolbar and press the scroll key.  
1. If the camera is in the image mode, select the video  
mode from the toolbar.  
The captured images are shown in a grid on the display.  
To view an image, scroll to it and press the scroll key.  
If you used a time interval, only the last image is shown  
on the display, and the other images are available in  
Gallery.  
2. To start recording, press the scroll key.  
3. To pause recording at any time, select Pause. Select  
Continue to resume recording.  
4. To stop recording, select Stop. The video clip is  
automatically saved in Gallery. The maximum  
length of the video clip depends on the available  
memory.  
To send the image, select Options > Send.  
To send the image to acallerduringanactive call, select  
Options > Send to caller.  
To switch off the sequence mode, select Sequence  
Play a video clip  
mode > Single shot in the toolbar.  
To play a recorded video clip, select Play from the  
toolbar.  
View captured image  
Select from the following toolbar items:  
The image you captured is automatically saved in  
Gallery. If you do not want to keep the image, select  
Delete from the toolbar.  
Send — Send the video clip to other compatible  
devices.  
Send to caller — Send the video clip to the caller  
during an active call.  
40  
Select from the following toolbar items:  
             
Post to — Send the video to an online album  
(network service).  
Video settings  
To change the video mode settings, select Options >  
Delete — Delete the clip.  
Settings and from the following:  
To enter a new name for the clip, select Options >  
Video quality — Set the quality of the video clip.  
Select Sharing, if you want to send the video clip  
using a multimedia message. The clip is recorded  
with OCIF resolution, in 3GPP format, and the size is  
limited to 300 kB (approximately 20 seconds). You  
may not be able to send video clips saved in the  
MPEG-4 file format in a multimedia message.  
Audio recording — Select Mute if you do not want  
to record sound.  
Rename video.  
Image settings  
To change the still image settings, select Options >  
Settings and from the following:  
Image quality — Set the image quality. The better  
the image quality, the more memory the image  
consumes.  
Show captured video — View the first frame of  
the recorded video clip after the recording stops. To  
view the entire video clip , select Play from the  
toolbar.  
Show captured image — To see the image after  
the capture, select On. To continue taking pictures  
immediately, select Off.  
Default image name — Define the default name  
for the captured images.  
Default video name — Define the default name for  
recorded video clips.  
Extended digital zoom On (continuous)  
allows the zoom increments to be smooth and  
continuous between the digital and extended  
digital zoom, and Off allows a limited amount of  
zoom while retaining the image resolution.  
Capture tone — Set the tone that sounds when you  
capture an image.  
Memory in use — Select where you want to store  
your video clips.  
Restore camera settings — Restore the camera  
settings to the default values.  
Nokia Podcasting  
Memory in use — Choose where to store your  
images.  
Select Menu > Media > Podcasting.  
Rotate image — Rotate the images.  
Restore camera settings — To return the default  
values to the camera settings, select Yes.  
Download podcasts to your device and listen them.  
Play and manage podcasts  
41  
Podcasting delivers audio or video content over the  
internet for playback on mobile devices and PCs.  
             
With the Nokia Podcasting application, you can search, Contents of the directories change. Select the desired  
discover, subscribe, and download podcasts over the  
air; and play, manage, and share podcasts with your  
device.  
directory folder to update it (network service). The  
colour of the folder changes, when the update is  
complete.  
To subscribe to a podcast, scroll to the podcast title and  
select Update. After you have subscribed to episodes  
of a podcast, you can download, manage, and play  
them in the podcasts menu.  
Define the connection and downloading settings  
before using the application. Select Options >  
Settings > Connection and Download.  
To search for new podcast episodes to subscribe to,  
select Directories.  
To add a new directory or folder, select Options >  
New > Web directory or Folder. Select a title, URL of  
the .opml (outline processor markup language) file,  
and Done.  
To search for podcasts using keywords and podcast  
show titles, select Search.  
To display the available episodes from the selected  
To import an .opml file stored on your device, select  
podcast, open the Podcasts folder and select Open.  
Options > Import OPML file.  
To download the selected episode, select Download.  
To save a received .opml file, open the file to save the  
file into the Received folder in Directories. Open the  
folder to subscribe to any of the links to add to your  
podcasts.  
To play the downloaded episode, select Play.  
To update the selected podcast or marked podcasts, for  
a new episode, select Options > Update.  
To open the web site of the podcast (network service),  
select Options > Open web page.  
Search podcasts  
Some podcasts provide the opportunity to interact  
with the creators by commenting and voting. To  
connect to the internet to do this, select Options >  
View comments.  
Search helps you find podcasts by keyword or title.  
The search engine uses the podcast search service you  
set up in Podcasting > Options > Settings >  
Connection > Search service URL.  
To search for podcasts, select Search, and enter the  
desired keywords.  
Directories  
Tip: Search looks for podcast titles and keywords  
in descriptions, not specific episodes. General  
topics, such as football or hip-hop, usually give  
better results than a specific team or artist.  
Select Directories.  
Directories help you find new podcast episodes to  
which to subscribe.  
42  
       
To subscribe to selected channels and add them to your or video content over the internet using either RSS or  
podcasts, select Subscribe.  
Atom technologies for playback on mobile devices and  
PCs.  
To start a new search, select Options > New search.  
You can transfer music from other compatible devices  
to your device. See "Transfer music from PC", p. 44.  
To see the details of a podcast, select Options >  
Description.  
Play a song or a podcast  
episode  
Podcasting settings  
To edit the connection settings, select Options >  
Settings > Connection.  
To add all available songs and podcasts to the music  
library, select Options > Refresh.  
To edit the download settings, select Options >  
Settings > Download.  
To play a song or a podcast episode, select Music or  
Podcasts and the desired category, then scroll to the  
song or podcast episode and press the scroll key.  
To restore the default settings, open the corresponding  
settings and select Options > Restore default.  
To pause playback, press the scroll key; to resume,  
press the scroll key again. To stop playback, scroll  
down.  
Music player  
To fast forward or rewind, press and hold the scroll key  
to the right or left.  
Warning: Listen to music at a moderate level.  
Continuous exposure to high volume may damage your  
hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be  
extremely loud.  
To go to the next item, scroll right. To return to the  
beginning of the item, scroll left. To skip to the previous  
item, scroll left again within 2 seconds after a song or  
podcast has started.  
To modify the tone of the music playback, select  
Select Menu > Media > Music player.  
Options > Equaliser.  
Music player supports files formats such as AAC, AAC+,  
eAAC+, MP3, and WMA. Music player does not  
necessarily support all features of a file format or all  
the variations of file formats.  
To modify the balance and stereo image or to enhance  
bass, select Options > Audio settings.  
To return to the home screen and leave the player  
You can also use Music player to listen to podcast  
playing in the background, press the end key.  
43  
episodes. Podcasting is a method for delivering audio  
         
storage as the connection mode. Make sure that a  
Playlists  
compatible memory card is inserted in the device.  
To view and manage playlists, select Music >  
If you select Media transfer as the connection mode,  
you can use Windows Media Player to synchronise  
music between your device and PC.  
Playlists.  
To create a new playlist, select Options > Create  
playlist.  
To add songs to the playlist, select the song and  
Options > Addtoa playlist > Saved playlistor New  
playlist.  
Transfer with Windows  
Media Player  
To reorder songs in a playlist, scroll to the song you  
Music synchronisation functions may vary between  
different versions of the Windows Media Player  
application. For more information, see the  
corresponding Windows Media Player guides and help.  
The following instructions are for Windows Media  
Player 11.  
want to move, and select Options > Reorder list.  
Nokia Music Store  
Select Menu > Media > Music store.  
Manual synchronisation  
In the Nokia Music Store (network service) you can  
search, browse, and purchase music to download to  
your device. To purchase music, you need to register  
for the service.  
With manual synchronisation, you can select the songs  
and playlists that you want to move, copy, or remove.  
1. After your device is connected with Windows Media  
Player, select your device in the navigation pane on  
the right, if more than one device is connected.  
To check the Nokia Music Store availability in your  
country, visit music.nokia.com.  
To find more music in the different categories, select  
2. In the left navigation pane, browse the music files  
Options > Find in Music store.  
on your PC which you want to synchronise.  
To select the access point to use with the Music Store,  
3. Drag and drop songs to the Sync List on the right.  
select Default acc. pt..  
You can see the amount of available memory in  
your device above the Sync List.  
4. To remove songs or albums, select an item in the  
Sync List, right-click, and select Remove from  
list.  
Transfer music from PC  
To transfer music from your PC, connect your device to  
the PC with a compatible USB data cable or Bluetooth  
connectivity. If you are using the USB cable, select Mass  
44  
5. To start the synchronisation, click Start Sync.  
             
To modify the frequency of a preset setting, select  
Options > Edit, select a frequency band, and scroll up  
or down to increase or decrease its value. You hear your  
frequency adjustment immediately in the playback.  
Automatic synchronisation  
1. To activate the automatic synchronisation function  
in Windows Media Player, click the Sync tab, select  
Nokia Handset > Set Up Sync..., and check the  
Sync this device automatically check box.  
To reset the frequency bands to their original values,  
select Options > Reset to defaults.  
2. Select the playlists you want to synchronise  
automatically in the Available playlists pane, and  
click Add.  
To create your own frequency setting, selectOptions >  
New preset. Enter a name for the frequency setting.  
Scroll up or down to move between the frequency  
bands and set the frequency on each band.  
The selected items are transferred to the Playlists  
to sync pane.  
3. To finalise the setup for automatic synchronisation,  
click Finish.  
Share online  
When the Sync this device automatically check box  
is checked and you connect your device to the PC, the  
music library in your device is automatically updated  
based on the playlists you select for synchronisation in  
Windows Media Player. If no playlists have been  
selected, the whole PC music library is selected for  
synchronisation. If there is not enough free memory in  
your device, Windows Media Player selects manual  
synchronisation automatically.  
Select Menu > Media > Share online.  
You can share images and video clips in compatible  
online albums, blogs, or in other compatible online  
sharing services on the web. You can upload content,  
save unfinished posts as drafts and continue later, and  
view the content of the albums. The supported content  
types may vary depending on the service provider.  
To share files online, you must have an account with  
an online image sharing service. You can usually  
subscribe to such a service on the web page of your  
service provider. Contact your service provider for more  
information.  
To stop automatic synchronisation, click the Sync tab,  
and select Stop Sync to 'Nokia Handset'.  
Preset frequency settings  
Select Menu > Media > Music player > Options >  
Share images online  
Go to Now playing > Options > Equaliser.  
To upload a file from Gallery to the online service, select  
Menu > Gallery, select the desired file and Options >  
Send > Post to web.  
To use a preset frequency setting when playing music,  
select the frequency setting you want to use, and select  
Options > Activate.  
45  
         
Recorder settings  
Recorder  
Recordings are automatically saved to the device  
memory unless you change the default location.  
Recordings that you create or receive after you change  
the settings are affected.  
Select Menu > Media > Recorder.  
With Recorder, you can record up to 60 minutes of a  
voice memo, save the voice recording as a sound clip,  
and play the sound clip. Recorder supports the AMR file  
format.  
To change the default location of saved recordings,  
select Options > Settings > Memory in use.  
You can also press the voice key to open the Recorder  
application. If you have logged in to push to talk, the  
voice key works as a push-to-talk key and does not  
open Recorder.  
To define the recording quality, select Options >  
Settings > Recording quality. If you select High, the  
sound clip you record is in waveform file format (.wav)  
and the maximum length for the clip is 60 minutes. If  
you select MMS compatible, the sound clip you record  
is in adaptive multirate file format (.amr), and the  
maximum length for the clip is one minute.  
Record a sound clip  
To record a sound clip, select Options > Record  
sound clip. Select Pause to pause the recording, and  
Record to resume recording. When you finish  
recording, select Stop. The sound clip is automatically  
saved to the Sound clips folder in Gallery.  
Gallery  
Select Menu > Media > Gallery.  
Use Gallery to access and use different types of media,  
including images, videos, music, and sounds. All  
viewed images and videos, and all received music and  
sounds are automatically saved to Gallery. Sound clips  
are opened in the Music player, and video clips and  
streaming links in the RealPlayer application. Images  
are opened in the image viewer.  
Play a recording  
To listen to the sound clip that you just recorded, select  
Play. The progress bar displays the playing time,  
position, and length of the clip. Select Stop to cancel  
the playback.  
To pause the playback of a recorded clip, select  
Pause. Playback resumes when you select Play.  
46  
             
To view the image in full screen size, select Options >  
Fullscreen. To returnto normal view, select Options >  
Normal screen.  
To rotate the image, select Options > Rotate. Select  
Right to rotate the image clockwise by 90 degrees, or  
select Left to rotate the image counterclockwise by 90  
degrees.  
Work with media files and  
folders  
To open a file or a folder, scroll to it, and press the scroll  
key.  
To create a new folder, select a file and then select  
Options > Organise > New folder. You cannot  
create folders within folders.  
To copy or move files, select a file and Options >  
Organise > Move to folder, New folder, Move to  
memory card, Copy to memory card, Copy to phone  
mem., or Move to phone mem..  
To download files into Gallery using the browser, select  
Downl. graphics, Downld. videos, Downld. tracks,  
or Downld. sounds. The browser opens, and you can  
choose a bookmark or enter the address for the  
download site.  
To search for a file, select Options > Find. Write the  
item you are searching for. Files that match the search  
are shown.  
Manage image files  
To view detailed information about the image, select  
Options > View details.  
To send the image, select Options > Send, and the  
method for sending.  
To rename the image, select Options > Rename.  
To set the image as the display background, select  
Options > Use image > Set as wallpaper.  
To add the image to a contact, select Options > Use  
image > Assign to contact. The Contacts application  
opens, and you can select the contact for the image.  
View images  
RealPlayer  
To open an image for viewing, select Options >  
Select Menu > Media > RealPlayer.  
Open.  
RealPlayer plays video clips and audio files that are  
stored in the device memory or on a memory card,  
transferred to your device from an e-mail message or  
a compatible computer, or streamed to your device  
over the web. Supported formats include MPEG-4, MP4  
(not streaming), 3GP, RV, RA, AMR, and Midi. RealPlayer  
To open the next or previous image for viewing, scroll  
right or left.  
To enlarge the image on the display, select Options >  
Zoom in. To reduce the image on the display, select  
Zoom out.  
47  
             
does not necessarily support all variations of a media  
file format.  
To download video clips from the web, select  
Options > Download videos.  
To view the video clip in full-screen size, select  
Options > Play in full screen. Full screen increases  
the size of the video to cover the maximum video area  
possible while the aspect ratio is maintained.  
Play video clips and stream  
links  
Warning: Do not hold the device near your ear  
when the loudspeaker is in use, because the volume  
may be extremely loud.  
To play a video clip or audio file, select Options >  
Open > Most recent clips to play one of the six clips  
you most recently played, or Saved clip to play a clip  
or open a web link. Select Play.  
Send audio files and video  
clips  
To transfer a media clip to a compatible device, select  
Options > Send. Select the sending method.  
To send a media clip inside a message, create a  
multimedia message, select a clip to attach and Insert  
object > Video clip or Sound clip.  
To play streaming media, select a web link that points  
to a clip, and select Play; or connect to the web, browse  
to a video clip or audio file, and select Play. RealPlayer  
recognises two kinds of links: an rtsp:// URL and an  
http:// URL that points to a RAM file. Before the content  
begins streaming, your device must connect to a web  
site and buffer the content. If a network connection  
problem causes a playback error, RealPlayer attempts  
automatically to reconnect to the internet access point.  
View information about a  
media clip  
To view the properties of a video clip, audio file, or web  
link, select Options > Clip details. Information may  
include for example the bit rate or the internet link of  
a streaming file.  
To adjust the volume during playback, use the volume  
To set on file protection for a media clip, select  
Options > Clip details > Status > Options >  
Change. File protection prevents others from changing  
a file.  
keys.  
To fast-forward during playback, scroll up and hold. To  
rewind during play, scroll down and hold.  
To stop the playback or streaming, select Stop.  
Buffering or connecting to the streaming site stops, the  
playback of the clip stops, and the clip rewinds to the  
beginning.  
48  
           
To organise your flash files, select Options >  
RealPlayer settings  
Organise.  
You may receive RealPlayer settings in a message from  
your service provider.  
To define the settings manually, select Options >  
Radio  
Settings > Video or Streaming.  
Select Menu > Media > Radio.  
The quality of the radio broadcast depends on the  
coverage of the radio station in that particular area.  
Flash player  
The FM radio depends on an antenna other than the  
wireless device antenna. Attach a compatible headset  
or enhancement to the device for the FM radio to  
function properly.  
Select Menu > Media > Flash Player.  
With Flash player, you can view, play, and interact with  
flash files made for mobile devices.  
Listen to the radio  
Warning: Listen to music at a moderate level.  
Continuous exposure to high volume may damage your  
hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be  
extremely loud.  
Manage flash files  
To optimise the use of Flash Player, insert a memory  
card in your device.  
To play a flash file, scroll to it, and press the scroll key.  
To send a flash file to compatible devices, select  
Options > Send. Copyright protection may prevent  
the sending of some flash files.  
To switch between flash files saved on your device  
memory or memory card, scroll to the corresponding  
tabs.  
To change the flash file quality, select Options >  
Quality when you are playing the flash file. If you select  
High, the playback of some flash files may appear  
uneven and slow due to their original settings. Change  
the quality setting of such files to Normal or Low for  
improved playback.  
To search for a station, select  
or  
. To set the  
frequency manually, select Options > Manual  
tuning.  
To view available stations based on location, select  
Options > Station directory (network service).  
To save the current station to your station list, select  
Options > Save station.  
To select a previously saved radio station, select  
or  
49  
.
               
To adjust the volume, use the volume keys.  
To view available visual content for a station with the  
Visual Radio service, select Options > Station > Start  
visual service.  
To switch from headset use to listening to the radio  
through the loudspeaker, select Options > Activate  
loudspeaker.  
To change the station details, select Options >  
Station > Edit.  
To return to the home screen and leave the FM radio  
playing in the background, select Options > Play in  
background.  
Radio settings  
Select Options > Settings and from the following:  
View visual content  
Start-up tone — Select whether a tone is played  
when the application is started.  
To check availability and costs, and to subscribe to the  
service, contact your service provider.  
Auto-start service — Select Yes to have the Visual  
Radio service start automatically when you select a  
saved station that offers the Visual Radio service.  
Access point — Select the access point used for the  
data connection. You do not need an access point to  
use the application as an ordinary FM radio.  
Current region — Select the region you are  
currently located in. This setting is displayed only if  
there was no network coverage when the  
application was started.  
Before you can view visual content, you must have an  
internet access point defined at Menu > Tools >  
Settings > Connection > Access points.  
1. To view available visual content for a tuned station,  
select Options > Start visual service. If the visual  
radio service ID has not been saved for the station,  
enter it, or select Retrieve to search for it in the  
station directory (network service).  
2. Select the location nearest to you from the station  
directory. If your device finds a station that matches  
the tuned frequency, its visual service ID is  
Internet radio  
displayed. To view the visual content, select OK.  
Select Menu > Media > Internet radio.  
Saved stations  
To open the list of your saved stations, select  
Options > Stations.  
To listen to a saved station, select Options >  
50  
Station > Listen.  
             
Listen to internet radio  
stations  
Warning: Listen to music at a moderate level.  
Continuous exposure to high volume may damage your  
hearing. Do not hold the device near your ear when the  
loudspeaker is in use, because the volume may be  
extremely loud.  
Search for stations  
To search for radio stations in the Nokia Internet Radio  
service by their name, select Search. Enter a station  
name or the first letters of it in the search field, and  
select Search.  
To listen to the station, select Listen.  
To save the station to your favourites, select Options >  
Add to Favourites.  
To make another search, select Options > Search  
To listen to a radio station on the internet, select a  
station from the station directory, search stations by  
their name from the Nokia Internet Radio service, or  
select Options > Add station manually. When you  
have found the correct station, select Listen.  
again.  
Save stations  
To view and listen to your favourite stations, select  
To stop the playback, press the scroll key. To resume  
Favourites.  
the playback, press the scroll key again.  
To add a station manually to favourites, select  
Options > Add station manually. Enter the web  
address of the station and a name that you want to  
appear in the favourites list.  
To adjust the volume, use the volume keys.  
To view station information, select Options > Station  
information (not available if you have saved the  
station manually).  
To add the currently playing station to favourites,  
If you are listening to a station saved in your favourites,  
scroll left or right to listen to the previous or next saved  
station.  
select Options > Add to Favourites.  
To view station information, to move a station up or  
down in the list, or to delete a station from the  
favourites, select Options > Station and the desired  
option.  
Tip: You can browse for station links with the  
Web application. Compatible links are  
automatically opened in the Internet radio  
application.  
To view only stations beginning with particular letters  
or numbers, start entering the characters. Matching  
stations are displayed.  
51  
         
Internet radio settings  
To select the default access point to connect to the  
network, select Options > Settings > Default  
access point. Select Always ask if you want the device  
to ask for the access point every time you open the  
application.  
To change the connection speed for GPRS packet data  
connections, select Options > Settings > GPRS  
connection bitrate.  
To change the connection speed for 3G packet data  
connections, select Options > Settings > 3G  
connection bitrate.  
To change the connection speed for WLAN connections,  
select Options > Settings > Wi-Fi connection  
bitrate.  
The quality of the radio broadcast depends on the  
selected connection speed. The higher the speed, the  
better the quality. To avoid buffering, use the highest  
quality only with high speed connections.  
52  
   
Internet  
With your new Eseries device you can browse both the  
internet and your company's intranet, and download  
and install new applications to your device. You can  
also use your device as a modem and connect your PC  
to the internet.  
Connection security  
If the security indicator ( ) is displayed during a  
connection, the data transmission between the device  
and the internet gateway or server is encrypted. The  
security icon does not indicate that the data  
transmission between the gateway and the content  
server (or place where the requested resource is  
stored) is secure. The service provider secures the data  
transmission between the gateway and the content  
server.  
Web  
Select Menu > Web.  
To browse the web (network service), you need to  
configure the internet access point settings. If you are  
using a data call or GPRS connection, your wireless  
network must support data calls or GPRS, and the data  
service must be activated for your SIM card.  
Security certificates may be required for some services,  
such as banking services. You are notified if the identity  
of the server is not authentic or if you do not have the  
correct security certificate in your device. For more  
information, contact your service provider.  
Tip: You may receive the internet access point  
settings from your service provider as a special  
text message or from the service provider's web  
pages. You can also enter the internet access  
point settings manually. See "Internet access  
points", p. 56.  
To browse the web, select a bookmark or enter the web  
address manually, and select Go to. Use only services  
that you trust and that offer adequate security and  
protection against harmful software.  
Check the availability of services, pricing, and fees with  
your service provider. Service providers also give you  
instructions on how to use their services.  
Tip: When you start to enter the address, the  
addresses of the pages you have previously  
visited that match your input are displayed. To  
53  
           
open a page, scroll to its address, and press the  
scroll key.  
information or services you have accessed are stored  
in the cache.  
To move on a web page, use the scroll key, which is  
shown as a pointer on the page. When you move the  
pointer over a link, the pointer changes into a hand.  
Press the scroll key to open the link. On a web page,  
new links usually appear underlined in blue and  
previously visited links in purple. Images that act as  
links have a blue border around them.  
To empty the cache, select Options > Clear privacy  
data > Clear cache.  
Feeds and blogs  
Select Menu > Web > Web feeds.  
Feeds usually contain headlines and articles, often  
about recent news or other topics. Blog is a shortening  
of weblog, which is a continuously updated web diary.  
The addresses of the pages you visit are saved in the  
Auto. bookmarks folder.  
To download a feed or blog, scroll to it, and press the  
scroll key.  
Bookmarks  
To access the bookmarks view while browsing, select  
Options > Bookmarks. To view a bookmarked web  
page, select the bookmark.  
To add or edita feed or blog, selectOptions > Manage  
feed > New feed or Edit.  
To browse to another web page, select Options > Go  
End a connection  
to web address, enter the web address, and select Go  
to.  
To end the connection and view the browser page  
offline, select Options > Tools > Disconnect. To end  
the connection and close the browser, select  
Options > Exit.  
To add a bookmark while browsing, select Options >  
Save as bookmark.  
To organise your bookmarks, in the bookmarks view,  
select Options > Bookmark manager. You can move  
and edit bookmarks, and create new folders.  
Web settings  
Select Menu > Web > Options > Settings.  
The web settings are divided into four groups:  
Clear the cache  
General contains access point, home page, and  
A cache is a memory location that is used to store data  
temporarily. If you have tried to access or have  
accessed confidential information requiring  
passwords, empty the cache after each use. The  
browsing security settings.  
Page contains imaging, audio, and pop-up settings.  
54  
Privacy contains settings related to your privacy.  
                   
Web feeds contains settings related to web feeds  
Download! uses your network services to access the  
most updated content. For information on additional  
items available through Download!, contact your  
service provider, or the supplier or manufacturer of the  
item.  
and blogs.  
Browse the intranet  
Select Menu > Office > Intranet.  
Only install and use applications and other software  
from sources that offer adequate security and  
protection against harmful software.  
To browse your company's intranet, you must create a  
company-specific VPN policy. Select Menu > Tools >  
Settings > Connection > VPN.  
Manage items  
To open an item or view the content of a folder or  
catalogue, scroll to it, and press the scroll key.  
To connect to the intranet, open the Intranet  
application, select the connection method and  
Options > Connect.  
To buy the selected item, select Options > Buy.  
To download an item that is free of charge, select  
To define which VPN profile to use in the connection,  
Options > Get.  
select Options > Use other VPN policy.  
To search for an item, select Options > Search.  
To define the settings for the intranet connection,  
To adjust the settings, select Options > Settings.  
select Options > Settings.  
To view the list of downloaded items, select Options >  
My items.  
Download!  
Subscriptions  
Select Menu > Download!.  
To view file details of the selected item, select  
With Download! (network service), you can browse,  
download, and install items, such as latest applications  
and related documents, to your device from the web.  
Options > Open.  
To renew or cancel a subscription, select Options and  
The items are categorised under catalogs and folders  
provided by Nokia or independent service providers.  
Some items may be chargeable, but you can usually  
preview them free of charge.  
the corresponding option.  
55  
             
Subscrip. confirmation — Define whether you  
want the subscription confirmation query to be  
shown before subscribing to an item.  
Download! search  
Scroll to the catalogues from which you want to search  
for items, select Mark to select them, and enter the  
search keywords.  
To start the search, select Options > Search.  
Internet access points  
An internet access point is a collection of settings,  
which define how the device creates a data connection  
to the network. To use e-mail and multimedia services  
or to browse web pages, you must first define access  
points for these services.  
Purchase history  
To open the selected item with the corresponding  
application, select Options > Open.  
To view file details of the selected item, select  
Some or all access points may be preset for your device  
by your service provider, and you may not be able to  
create, edit, or remove them.  
Options > View details.  
To start, pause, resume, or cancel the download of the  
selected item, select Options and the corresponding  
option.  
Set up an internet access  
point for packet data (GPRS)  
Download! settings  
1. Select Menu > Tools > Settings >  
To change the Download! settings, select Options >  
Connection > Access points.  
Settings and from the following:  
2. Select Options > New access point to create a  
new access point, or select an existing access point  
from the list and then Options > Duplicate access  
point to use the access point as a basis for the new  
one.  
Access point — Select an access point to use to  
connect to the service provider's server.  
Automatic open — Select whether you want the  
downloaded item or application to open  
automatically after the download is completed.  
Preview confirmation — Select whether you want  
a confirmation query to be shown before  
previewing an item.  
3. Define the following settings.  
Connection name — Enter a descriptive name  
for the connection.  
Buy confirmation — Select whether you want a  
confirmation query to be shown before buying an  
item.  
Data bearer — Select Packet data.  
56  
                 
Access point name — Enter the name for the  
access point. The name is usually provided by  
your service provider.  
After setting up a basic internet access point for packet  
data (GPRS), select Options > Advanced settings,  
and define the following advanced settings:  
User name — Enter your user name if required  
by the service provider. User names are often  
case-sensitive and provided by your service  
provider.  
Network type — Select IPv4 or IPv6 as the internet  
protocol type. The internet protocol defines how  
data is transferred to and from your device.  
Phone IP address — Enter the IP address of your  
device. Select Automatic to have the network  
provide the device IP address. This setting is shown  
only if you select Network type > IPv4.  
DNS address — Select Primary DNS address and  
Secondary DNS address and enter their IP  
addresses, if required by your service provider.  
Otherwise, the name server addresses are provided  
automatically.  
Prompt password — Select Yes to enter your  
password each time you log into a server or No  
to save the password in your device memory and  
automate the login.  
Password — Enter your password if required by  
the service provider. The password is often case-  
sensitive and provided by the service provider.  
Authentication — Select Secure to send your  
password always encrypted, or Normal to send  
your password encrypted when possible.  
Homepage — Enter the web addressof thepage  
you want to display as the home page when you  
use this access point.  
Proxy server address — Enter the address of the  
proxy server. Proxy servers are intermediate servers  
used by some service providers between a browsing  
service and its users. These servers may provide  
additional security and speed up access to the  
service.  
4. After defining the settings, select Options >  
Advanced settings to define the advanced  
settings or Back to save the settings and exit.  
Set up an access point for  
WLAN manually  
Advanced internet access  
point settings for packet  
data (GPRS)  
1. Select Menu > Tools > Settings >  
Connection > Access points.  
2. Select Options > New access point to create a  
new access point, or select an existing access point  
from the list and then Options > Duplicate access  
point to use the access point as a basis for the new  
one.  
Select Menu > Tools > Settings > Connection >  
Access points.  
57  
3. Define the following settings.  
       
Connection name — Enter a descriptive name  
for the connection.  
Advanced access point  
settings for WLAN  
Data bearer — Select Wireless LAN.  
WLAN network name — To enter the service  
set identifier (SSID), that is, the name that  
identifies the specific WLAN, select Enter  
manually. To select the network from the  
WLANs in range, select Search for networks.  
Network status — Select Hidden if the  
network you are connecting to is hidden or  
Public if it is not hidden.  
Select Menu > Tools > Settings > Connection >  
Access points.  
After setting up a basic access point for WLAN, select  
Options > Advanced settings, and define the  
following advanced settings:  
IPv4 settings — Enter the device IP and name  
server addresses for the IPv4 internet protocol.  
IPv6 settings — Select or enter the name server  
addresses for the IPv6 internet protocol.  
Ad-hoc channel — The channel is usually chosen  
automatically. To enter the channel number (1-11)  
manually, select User defined.  
WLAN network mode — If you select  
Infrastructure, devices can communicate with  
each other and with wired LAN devices through  
a WLAN access point. If you select Ad-hoc,  
devices can send and receive data directly with  
each other, and no WLAN access point is needed.  
WLAN security mode — You must select the  
same security mode that is used in the WLAN  
access point. If you select WEP (wired equivalent  
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected  
access), you must also configure the relevant  
additional settings.  
Proxy server address — Enter the proxy server  
address.  
Proxy port number — Enter the proxy server port  
number.  
Connect PC to web  
WLAN security settings — Edit the security  
settings for the selected security mode.  
Homepage — Enter the web address of the  
page you want to display as the home page  
when you use this access point.  
You can use your device to connect your PC to the web.  
1. Connect the data cable to the USB connectors of  
your device and your PC.  
2. Select Connect PC to web. The necessary software  
To set up a WLAN access point automatically, use the  
WLAN wizard. Select Menu > Connectivity > WLAN  
wiz..  
is automatically installed from your device to the  
PC.  
3. Accept the installation in your PC. If asked, accept  
also the connection. When the connection to the  
58  
       
web is established, the web browser of your PC  
opens.  
You must have administrator rights to your PC, and the  
autorun option enabled in the PC. If not, run the  
setup.exe file from the CD-ROM drive of your PC.  
59  
Messaging  
Select Menu > Communic. > Messaging.  
If not, you may need to define the settings manually;  
or contact your service provider to configure the  
settings.  
In Messaging (network service), you can send and  
receive text messages, multimedia messages, audio  
messages, and e-mail messages. You can also receive  
web service messages, cell broadcast messages, and  
special messages containing data, and send service  
commands.  
Messages and data received using Bluetooth  
connectivity or infrared are stored in the Inbox folder.  
E-mail messages are stored in Mailbox. Messages that  
you have been writing can be stored in the Drafts  
folder. Messages that are waiting to be sent are stored  
in the Outbox folder, and messages that have been  
sent, excluding Bluetooth and infrared messages, are  
stored in the Sent folder.  
Before sending or receiving messages, you may need  
to do the following:  
Insert a valid SIM card in the device and be located  
in the service area of a cellular network.  
Verify that the network supports the messaging  
features you want to use and that they are activated  
on your SIM card.  
Tip: Messages are placed in Outbox, for example,  
when your device is outside network coverage.  
You can also schedule e-mail messages to be  
sent the next time you connect to your remote  
mailbox.  
Define the internet access point settings on the  
device. See "Internet access points", p. 56.  
Define the e-mail account settings on the device. See  
"E-mail account settings", p. 76.  
Define the text message settings on the device. See  
"Text message settings", p. 74.  
Note: The message sent icon or text on your  
device screen does not indicate that the message is  
received at the intended destination.  
To request the network to send you a delivery report  
of the text messages and multimedia messages you  
have sent (network service), select Options >  
Define the multimedia message settings on the  
device. See "Multimedia message  
settings", p. 75.  
The device may recognise the SIM card provider and  
60  
automatically configure some of the message settings.  
     
Settings > Text message or Multimedia  
To pause the reading, press the left selection key  
message > Receive report. The reports are saved in briefly. To continue, press the left selection key briefly  
the Reports folder.  
again.  
To end the reading, press the end key.  
Organise messages  
Speech  
To create a new folder to organise your messages,  
select My folders > Options > New folder.  
Select Menu > Tools > Speech.  
To rename a folder, select Options > Rename  
folder. You can only rename folders that you have  
created.  
With Speech, you can set the language, voice, and voice  
properties for the message reader.  
To move a message to another folder, select the  
message, Options > Move to folder, the folder, and  
OK.  
Edit the voice properties  
To set the language for the message reader, select  
Language. To download additional languages to your  
device, visit the Nokia web site or use the Download!  
application.  
To sort messages in a specific order, select Options >  
Sort by. You can sort the messages by Date, Sender,  
Subject, or Message type.  
To set the speaking voice, select Voice. The voice is  
To view the properties of a message, select the  
language-dependent.  
message and Options > Message details.  
To set the speaking rate, select Voice settings >  
Speed.  
Message reader  
To set the speaking volume, select Voice settings >  
Volume.  
The message reader reads received text and  
multimedia messages aloud.  
To listen to a voice, open the voice tab, select the voice,  
and select Options > Play voice.  
To play a message, press and hold the left selection key  
when you receive a message.  
To start reading the next message in Inbox, scroll  
down. To start reading the message again, scroll up. In  
the beginning of the message, scroll up to hear the  
previous message.  
E-mail messages  
61  
Select Menu > Messaging > Mailbox.  
               
To receive and send e-mail, you must have a remote  
mailbox service. This service may be offered by an  
internet service provider, a network service provider,  
or your company. Your device is compliant with  
internet standards SMTP, IMAP4 (revision 1), and POP3,  
and with different vendor-specific e-mail solutions.  
Other e-mail providers mayoffer services withdifferent  
settings or features than those described in this user  
guide. Contact your e-mail provider or service provider  
for more details.  
Nokia Email  
The Nokia Email service automatically pushes e-mail  
from your existing e-mail address to your E66 . You can  
read, respond to, and organise your e-mails on the go.  
The Nokia Email service works with a number of  
internet e-mail providers that are often used for  
personal e-mail, such as Google e-mail services.  
The Nokia Email service may not be available in all  
countries.  
You may be able to install the following e-mails to your  
To install the Nokia Email application:  
device:  
1. In the home screen, scroll to the e-mail wizard, and  
Regular POP or IMAP e-mail. You need to connect to  
the mailbox, and download the e-mails to your  
device before you can read them.  
press the scroll key.  
2. Select Start e-mail setup.  
3. Read the information on the display, and select  
Nokia Email service. Nokia Email is used with  
different internet e-mail providers, such has Google  
e-mail services. The Nokia Email service pushes the  
new e-mails to your device as long as the Nokia  
Email application is open.  
Start.  
4. Select Yes to allow your device to access the  
network.  
5. Select Nokia Email service.  
Mail for Exchange. Mail for Exchange is usually used  
for accessing work e-mails. Your company's IT  
department may have further instructions on how  
to install and use Mail for Exchange with your  
company's e-mail servers.  
6. Select Yes to install the Nokia Email application.  
7. Read the information on the display, and select  
Continue.  
After the Nokia Email application has been installed,  
setup continues automatically.  
Other e-mail solutions may be available.  
To set up the Nokia Email service:  
If you have defined several mailboxes, for example a  
POP or IMAP e-mail and Mail for Exchange, select one of  
them as your default mailbox. That mailbox is used  
every time you start composing a new e-mail message.  
1. Select Yes to allow your device to access the  
network.  
2. Read the information on the display, and select  
To define the default mailbox in Messaging, select  
Options > Settings > E-mail > Default mailbox  
and the mailbox.  
Start.  
62  
 
3. Enter your e-mail address and password, and select  
Your network domain name (contact your  
company's IT department)  
Next.  
4. Enter your telephone number in the international  
Your Mail for Exchange server name (contact your  
format, and select OK.  
company's IT department)  
5. Read the Terms and Conditions, and select Accept. Depending on your company's Mail for Exchange server  
configuration, you may need to enter other  
information in addition to those listed. If you do not  
know the correct information, contact your company's  
IT department.  
6. Select OK to finalise e-mail setup. The Nokia Email  
application opens and synchronises your e-mails  
from your e-mail address with your device.  
The Nokia Email service can run on your device even if  
you have installed other e-mail applications such as  
Mail for Exchange. However, if you are using Nokia  
Intellisync Mobile Suite, it must be uninstalled before  
using the Nokia Email service.  
With Mail for Exchange, the use of lock code may be  
mandatory. The default lock code of E66 is 12345, but  
your company's IT administrator may have set a  
different one for you to use.  
Depending on your company, the Mail for Exchange  
installation may show you different information  
popups during the setup process. Read the popups, and  
select Continue, OK, Next, or Yes to continue.  
Mail for Exchange  
With Mail for Exchange, you can receive your work e-  
mail to your E66 . You can read and reply to your e-  
mails, view and edit attachments, view calendar  
information, receive and reply to meeting requests,  
schedule meetings, and view, add, and edit contact  
information. Mail for Exchange can be set up only if  
your company has Microsoft Exchange Server. In  
addition, your company's IT administrator must have  
activated Mail for Exchange for your account.  
To install Mail for Exchange:  
1. In the home screen, scroll to the e-mail wizard, and  
press the scroll key.  
2. Select Start e-mail setup.  
3. Read the information on the display, and select  
Start.  
4. Select Yes to allow your device to access the  
Before starting to install Mail for Exchange, ensure that  
network.  
you have the following:  
5. Enter your e-mail address, and select OK.  
6. Enter your password, and select OK.  
7. Enter your user name, and select OK.  
8. Select Mail for Exchange.  
A corporate e-mail ID  
Your office network user name  
Your office network password  
63  
 
9. Enter the domain name of your network, and select 5. Select E-mail.  
OK.  
6. Enter your e-mail address, and select OK.  
10. Enter the Mail for Exchange server name, and select  
7. Enter your password, and select OK.  
OK.  
8. If requested, select an internet access point that is  
used for connecting to your POP or IMAP e-mail  
account.  
11. Select Yes to install the Mail for Exchange  
application to your device.  
After installation, you may create your Mail for  
Exchange profile by changing the settings. However,  
depending on your company, the profile may be  
created automatically.  
9. Read the information on the display, and select  
OK to finalise e-mail setup. The name of your new  
mailbox replaces Mailbox in the Messaging main  
view.  
Tip: After you have set up a POP or IMAP e-mail,  
in the Messaging main view, select Options >  
Settings > E-mail and the mailbox to edit the  
settings, for example a possible signature, or the  
name of your mailbox.  
Regular POP or IMAP e-mail  
Your device can download e-mails from a POP or IMAP  
e-mail account.  
POP3 is a version of the post office protocol that is used  
to store and retrieve e-mail or internet mail messages  
from a server. IMAP4 is a version of the internet  
message access protocol that lets you access and  
manage e-mail messages while the messages are still  
on the e-mail server. You can then choose which  
messages to download to your device.  
Connect to a remote mailbox  
E-mail addressed to you is not automatically received  
by your device, but by your remote mailbox. To read  
your e-mail, you must first connect to the remote  
mailbox; then select the e-mail messages you wish to  
retrieve into your device.  
1. To retrieve received e-mail messages to your device  
and view them, select your mailbox in the  
Messaging main view. When the device asks  
Connect to mailbox?, select Yes.  
Set up POP or IMAP e-mail  
1. Go to the home screen, scroll to the e-mail wizard,  
and press the scroll key.  
2. Select Start e-mail setup.  
2. Enter your user name and password, if prompted.  
3. Read the information on the display, and select  
3. Select Options > Retrieve e-mail > New to  
retrieve new messages that you have neither read  
nor retrieved, Selected to retrieve only messages  
you select from the remote mailbox, or All to  
retrieve all messages not previously retrieved.  
Start.  
4. Select Yes to allow your device to access the  
network.  
64  
         
4. To manage your e-mail offline to save in connection To set the message priority, select Options > Sending  
costs and work in conditions that do not allow a  
data connection, select Options > Disconnect to  
disconnect from the remote mailbox. Any changes  
you make in the remote mailbox folders while  
offline, take effect in your remote mailbox the next  
time you go online and synchronise.  
options > Priority.  
To set the sending time for the e-mail message, select  
Options > Sending options > Send message.  
Select Immediately, or select When conn. avail. if  
you are working offline.  
To call the sender of the e-mail message, if the sender  
can be found in Contacts, select Options > Call.  
Read and reply to e-mail  
Important: Exercise caution when opening  
messages. Messages may contain malicious software  
or otherwise be harmful to your device or PC.  
To read a received e-mail, open it from the mailbox.  
To reply to the sender of the e-mail with an audio  
message or multimedia message, select Options >  
Create message.  
Write and send e-mail  
1. To write an e-mail, select New message > E-  
To open an attachment, select Options >  
Attachments. Scroll to the attachment, and press the  
scroll key.  
mail.  
2. Select Options > Add recipient to select the  
recipients' e-mail addresses from Contacts, or enter  
the e-mailaddresses inthe To field. Use a semicolon  
to separate entries. Use the Cc field to send a copy  
to other recipients, or the Bcc field to send a blind  
copy to recipients.  
To reply only to the sender of an e-mail, select  
Options > Reply > To sender.  
To reply to all recipients of an e-mail, select Options >  
Reply > To all.  
3. In the Subject field, enter the subject of the e-mail.  
Tip: If you reply to an e-mail that contains  
attached files, the attachments are not included 4. Enter your e-mail message in the text area, and  
in the reply. If you forward the received e-mail,  
select Options > Send.  
the attachments are included.  
Delete messages  
To forward an e-mail, select Options > Forward.  
To free up memory space on your device, regularly  
delete messages from the Inbox and Sent folders, and  
delete retrieved e-mail messages.  
To attach a file to an e-mail message, select Options >  
Insert and the attachment you want to add.  
To delete an attachment from an e-mail that you are  
sending, select the attachment and Options >  
Remove.  
To delete e-mail from the device only, and keep the  
original on the server, select Options > Delete >  
Phone (header remains).  
65  
           
To delete e-mail both from the device and the remote  
server, select Options > Delete > Phone and  
server.  
and characters from some language options, take up  
more space, and limit the number of characters that  
can be sent in a single message.  
1. To write a text message, select New message >  
To cancel the deleting, select Options > Restore.  
Text message.  
Subfolders in your remote e-mail  
2. In the To field, enter a recipient's number, or press  
the scroll key to add a recipient from Contacts. If you  
enter more than one number, separate the  
numbers with a semicolon.  
If you create subfolders in your IMAP4 mailboxes on a  
remote server, you can view and manage these folders  
with your device when you subscribe to them. You can  
only subscribe to folders in your IMAP4 mailboxes.  
3. Enter the text of the message. To use a template,  
select Options > Insert > Template.  
To view folders in your IMAP4 mailbox, establish a  
connection, and select Options > E-mail settings >  
Retrieval settings > Folder subscriptions.  
4. Select Options > Send.  
To view a remote folder, select a folder and Options >  
Subscribe. Every time you go online, the subscribed  
folders are updated. This may take some time if the  
folders are large.  
Sending options for text  
messages  
To select a message centre to send the message, select  
Options > Sending options > Message centre in  
use.  
To update the list of folders, select a folder and  
Options > Update folder list.  
To have the network send you delivery reports on your  
messages (network service), select Options >  
Sending options > Receive report > Yes.  
To define how long the message centre resends your  
message (network service) if the first attempt fails,  
select Options > Sending options > Message  
validity. If the recipient cannot be reached within the  
validity period, the message is deleted from the  
message centre.  
Text messages  
Select Menu > Communic. > Messaging.  
Write and send text  
messages  
Your device supports text messages beyond the limit  
for a single message. Longer messages are sent as two  
or more messages. Your service provider may charge  
accordingly. Characters with accents or other marks,  
To convert the message to another format, select  
Options > Sending options > Message sent as >  
Text, Fax, Paging, or E-mail. Change this option only  
66  
             
if you are sure that your message centre is able to  
convert text messages into these other formats.  
Contact your service provider.  
To save a message in a different folder, select  
Options > Move to folder.  
To add the sender of the message to Contacts, select  
Options > Save to Contacts.  
Text messages on the SIM  
card  
Forward picture messages  
1. To forward the message, open the message from  
Select Menu > Communic. > Messaging >  
the Inbox folder and select Options > Forward.  
Options > SIM messages.  
2. In the To field, enter a recipient's number, or press  
the scroll key to add a recipient from Contacts. If you  
enter more than one number, separate the  
numbers with a semicolon.  
Text messages may be stored on your SIM card. Before  
you can view SIM messages, you must copy the  
messages to a folder in the device. After copying the  
messages to a folder, you can view them in the folder  
or delete them from the SIM card.  
3. Enter the text of your message. To use a template,  
select Options > Insert > Template.  
1. Select Options > Mark/Unmark > Mark or Mark  
all to mark every message.  
4. Select Options > Send.  
2. Select Options > Copy.  
Tip: To remove the picture from the message,  
select Options > Remove picture.  
3. Select a folder and OK to begin copying.  
To view SIM card messages, open the folder where you  
copied the messages, and open a message.  
Multimedia messages  
Select Menu > Communic. > Messaging.  
View picture messages  
Only devices that have compatible features can receive  
and display multimedia messages. The appearance of  
amessage may vary depending on the receiving device.  
The appearance of a picture message may vary  
depending on the receiving device.  
To view a picture message, open the message from the  
A multimedia message (MMS) can contain text and  
Inbox folder.  
objects such as images, sound clips, or video clips.  
To view information about the picture message, select Before you can send or receive multimedia messages  
Options > Message details.  
on your device, you must define the multimedia  
message settings. Your device may have recognised  
the SIM card provider and automatically configured the  
67  
             
multimedia message settings. If not, use Settings  
wizard, or contact your service provider for the correct  
settings. See "Multimedia message settings", p. 75.  
To change the order of slides in your message,  
select Options > Move.  
6. To preview a multimedia message before sending  
it, select Options > Preview.  
7. Select Options > Send.  
Create and send multimedia  
messages  
To delete an object from a multimedia message, select  
Options > Remove.  
To set the sending options for the current multimedia  
Important: Exercise caution when opening  
messages. Messages may contain malicious software  
or otherwise be harmful to your device or PC.  
message, select Options > Sending options.  
Receive and reply to  
multimedia messages  
Important: Exercise caution when opening  
messages. Messages may contain malicious software  
or otherwise be harmful to your device or PC.  
1. To create a new message, select New message >  
Multimedia message.  
2. In the To field, enter a recipient's number or e-mail  
address, or press the scroll key to add a recipient  
from Contacts. If you enter more than one number  
or e-mail address, separate them with a semicolon.  
3. In the Subject field, enter a subject for the  
message. To change the fields that are visible,  
select Options > Address fields.  
Tip: If you receive multimedia messages that  
contain objects unsupported by your device, you  
cannot open them. Try to send these objects to  
another device such as a computer, and open  
them there.  
4. Enter the text of the message, and select Options >  
Insert object to add media objects. You can add  
objects such as Image, Sound clip, or Video clip.  
1. To reply to a multimedia message, open the  
The wireless network may limit the size of MMS  
messages. If the inserted picture exceeds this limit  
the device may make it smaller so that it can be sent  
by MMS.  
message, and select Options > Reply.  
2. Select Options and Tosender to reply to thesender  
with a multimedia message, Via text message to  
reply with a text message, Via audio message to  
reply with an audio message, or Via e-mail to reply  
with an e-mail message.  
5. Each slide of your message can contain only one  
video or sound clip. To add more slides to your  
message, select Options > Insert new > Slide.  
68  
       
Tip: To add recipients to your reply, select  
Options > Add recipient to select the  
recipients of the message from Contacts, or  
enter the recipients' phone numbers or e-  
mail addresses manually in the To field.  
To select the background colour for the presentation  
and background images for different slides, select  
Options > Background settings.  
To set effects between images or slides, select  
Options > Effect settings.  
3. Enter the text of the message, and select Options >  
To preview the presentation, select Options >  
Preview. Multimedia presentations may only be  
viewed in compatible devices that support  
presentations. They may appear different in different  
devices.  
Send.  
Create presentations  
Creating multimedia presentations is not possible if  
the MMS creation mode setting is set to Restricted.  
To change the setting, select Messaging > Options >  
Settings > Multimedia message > MMS creation  
mode > Free.  
View presentations  
To view a presentation, open the multimedia message  
from the Inbox folder. Scroll to the presentation, and  
press the scroll key.  
1. To create a presentation, select New message >  
Multimedia message.  
To pause the presentation, press either selection key.  
2. In the To field, enter a recipient's number or e-mail  
address, or press the scroll key to add a recipient  
from Contacts. If you enter more than one number  
or e-mail address, separate them with a semicolon.  
To resume playing the presentation, select Options >  
Continue.  
If the text or images are too large to fit on the display,  
select Options > Activate scrolling, and scroll to see  
the entire presentation.  
3. Select Options > Create presentation and a  
presentation template. A template may define  
which media objects you can include in the  
presentation, where they appear, and which effects  
are displayed between images and slides.  
To find phone numbers and e-mail or web addresses in  
the presentation, select Options > Find. You may use  
these numbers and addresses to make calls, send  
messages, or create bookmarks, for example.  
4. Scroll to the text area and enter the text.  
5. To insert images, sound, video, or notes in your  
presentation, scroll to the corresponding object  
area, and select Options > Insert.  
6. To add slides, select Insert > New slide.  
69  
     
Tip: To edit the delivery settings of the message,  
View and save multimedia  
attachments  
select Options > Sending options.  
To view multimedia messages as complete  
presentations, open the message, and select  
Options > Play presentation.  
Send a sound clip  
1. To compose an audio message, select New  
message > Audio message.  
Tip: To view or play a multimedia object in a  
multimedia message, select View image, Play  
sound clip, or Play video clip.  
2. In the To field, enter a recipient's number or e-mail  
address, or press the scroll key to add a recipient  
from Contacts. If you enter more than one number  
or e-mail address, separate them with a semicolon.  
To view the name and size of an attachment, open the  
message, and select Options > Objects.  
3. Select Options > Insert sound clip, and select  
whether to record a sound clip or select one from  
Gallery.  
To save a multimedia object, select Options >  
Objects, the object, and Options > Save.  
4. Select Options > Send.  
Forward a multimedia  
message  
Sending options for  
Open Inbox, scroll to a multimedia notification, and  
press the scroll key. To send the message to a  
compatible device without retrieving it to your device,  
select Options > Forward. If the server does not  
support multimedia message forwarding, this option  
is not available.  
multimedia messages  
Select New message > Multimedia message >  
Options > Sending options and from the following  
options:  
Receive report — Select Yes if you want to receive  
a notification when the message has been  
1. In the To field, enter a recipient's number or e-mail  
address, or press the scroll key to add a recipient  
from Contacts. If you enter more than one number  
or e-mail address, separate them with a semicolon.  
successfully delivered to the recipient. Receiving a  
delivery report of a multimedia message that has  
been sent to an e-mail address may not be possible.  
Message validity — Select how long the  
2. Edit the message, if desired, and select Options >  
messaging centre tries to send the message. If the  
recipient of a message cannot be reached within the  
validity period, the message is removed from the  
Send.  
70  
               
multimedia messaging centre. The network must  
support this feature. Maximum time is the  
maximum amount of time allowed by the network.  
Priority — Set the sending priority to High,  
Normal, or Low.  
Define IM settings  
To define the IM application settings, select Options >  
Settings > IM settings. You can, for example, set your  
screen name and IM alert tones.  
To converse with an IM user or users, and to view and  
edit your IM contacts, you must log into an instant  
messaging server. To add an IM server, select  
Instant messaging  
Options > Settings > Servers. Ask your service  
provider for the correct settings. To set the server as  
the one to which your device automatically logs in,  
select Options > Settings > Default server.  
Select Menu > Communic. > IM.  
Instant messaging (IM) (network service) allows you to  
converse with other people using instant messages  
and join discussion forums (IM groups) with specific  
topics. Various service providers maintain IM servers  
that you can log in to after you register to an IM service.  
Service providers may differ in their support of  
features.  
To define how your device connects to the IM server,  
select Options > Settings > IM login type. To  
establish a connection between your device and the  
default server automatically, select Automatic. To  
automate the connection only when in your home  
network, select Auto in home netw. To connect to the  
server when you open the IM application, select On  
app. start-up. To connect to the server manually,  
select Manual and log into the server in the IM main  
view by selecting Options > Log in. Enter your user  
ID and password at the prompt. You can obtain the user  
name, password, and other settings to log in from your  
service provider when you register for the service.  
If IM is not available from your service provider, it may  
not appear in the menu of your device. Contact your  
service provider for more information about signing up  
for IM services and costs of services. For more  
information on IM settings, contact your service  
provider.  
You may receive the settings in a special text message  
from the service provider that offers the IM service. If  
not, enter the settings manually.  
Other instant messaging solutions, such as  
WindowsLive and Yahoo, may be available in  
Download.  
Start a conversation  
Open Conversations.  
To search for IM users and user IDs, select IM  
contacts > Options > New IM contact > Search.  
You can search by User's name, User ID, Phone  
number, and E-mail address.  
71  
         
To view a conversation, select a participant.  
To join an IM group that is not on the list, but for which  
you know the group ID, select Options > Join new  
group.  
To continue the conversation, enter your message, and  
select Options > Send.  
To return to the conversations list without closing the  
conversation, select Back. To close the conversation,  
select Options > End conversation.  
To start a new conversation, select Options > New  
conversation. You can start a new conversation with  
a contact while you are inside an active conversation.  
However, you cannot have two active conversations  
with the same contact.  
To insert an image to an instant message, select  
Options > Send image, and select the image you  
want to send.  
To leave the IM group, select Options > Leave IM  
group.  
To search for IM groups and group IDs, select IM  
groups > Options > Search. You can search by  
Group name, Topic, and Members (user ID).  
To add an IM user to the group, select Options > Add  
member. Select a user from your IM contacts or enter  
the contact ID.  
To remove a member from the IM group, select  
Options > Remove.  
To provide members with editing rights to the group,  
To save a conversation participant to your IM contacts, select Options > Add editor. Select a user from your  
select Options > Add to IM contacts.  
IM contacts or enter the ID of the user. IM users with  
editing rights can edit group settings and invite other  
users to join the group or ban them from the group.  
To save a conversation, while in the conversation view,  
select Options > Record chat. The conversation is  
saved as a text file that can be opened and viewed in  
the Notes application.  
To remove editing rights from a group member, select  
Options > Remove.  
To prevent IM users from joining the group, select  
Options > Add to banned list. Select a user from your  
IM contacts or enter the ID of the user.  
IM groups  
Open IM groups. IM groups is available only if you are  
logged into an IM server, and the server supports IM  
groups.  
To allow a banned user to join the group, select  
Options > Remove.  
To create an IM group, select Options > Create new  
group.  
Block users  
To join an IM group or to continue a group  
Select IM contacts > Options > Blocking options >  
conversation, scroll to the group, and press the scroll  
key. Enter a message, and select Options > Send.  
View blocked list.  
72  
       
To find a blocked IM user, enter the first letters of the  
user's name. Matching names appear in a list.  
Offline contacts — Select if IM contacts with an  
offline status are shown in the IM contacts list.  
Own message colour — Select the colour of the  
instant messages you send.  
To allow receiving messages from a blocked IM user,  
select Options > Unblock.  
To prevent receiving messages from other IM users,  
select Options > Block new contacts. Select the IM  
user from your IM contacts, or enter the user ID.  
Received msg colour — Select the colour of the  
instant messages you receive.  
Show date/ time info — Select Yes to view the  
receiving or sending time of each message in an IM  
conversation.  
IM alert tone — Select the tone that is played when  
you receive a new instant message.  
IM application settings  
Select Options > Settings > IM settings and define  
the following settings:  
Special message types  
Use screen name — To change the name that  
identifies you in IM groups, select Yes.  
Show my availability — Select whether you allow  
all other IM users or only your IM contacts to see  
when you are online. Select To no-one to hide your  
online status.  
Select Menu > Communic. > Messaging.  
You can receive special messages that contain data,  
such as operator logos, ringing tones, bookmarks, or  
internet access or e-mail account settings.  
Allow messages from — Select to receive instant  
messages from all other IM users, your IM contacts  
only, or not to receive messages at all.  
Allow invitations from — Select to receive  
invitations to IM groups from all IM users, your IM  
contacts only, or not to receive invitations at all.  
Msg. scrolling speed — To decrease or increase the  
speed at which new messages are displayed, scroll  
left or right.  
To save the contents of these messages, select  
Options > Save.  
Service messages  
Service messages are sent to your device by service  
providers. Service messages may contain notifications  
such as news headlines, services, or links through  
which the message content can be downloaded.  
Sort IM contacts — Select to list your IM contacts  
alphabetically or by their online status.  
Availability reloading — To update the online  
status of your IM contacts automatically, select  
Automatic.  
To define the service message settings, select  
Options > Settings > Service message.  
To download the service or message content, select  
73  
Options > Download message.  
         
To view information about the sender, web address,  
expiration date, and other details of the message  
before downloading it, select Options > Message  
details.  
To view messages related to a topic, select the topic.  
To receive messages related to a topic, select  
Options > Subscribe.  
Tip: You can set important topics as hot topics.  
While the device is in the standby mode, you are  
notified when you receive a message related to  
a hot topic. Select a topic, and select Options >  
Hotmark.  
Send service commands  
You can send a service request message (also known  
as a USSD command) to your service provider and  
request activation for certain network services. Contact  
your service provider for the service request text.  
To add, edit, or delete topics, select Options >  
Topic.  
To send a service request message, select Options >  
Service command. Enter the service request text and  
select Options > Send.  
Messaging settings  
Select Menu > Communic. > Messaging >  
Options > Settings.  
Cell broadcast  
Fill in all fields marked with Must be defined or with  
a red asterisk.  
Select Menu > Communic. > Messaging >  
Options > Cell broadcast.  
Your device may recognise the SIM card provider and  
configure the correct text message, multimedia  
message, and GPRS settings automatically. If not,  
contact your service provider for the correct settings,  
order the settings from your service provider in a  
configuration message, or use the Settings wizard  
application.  
With the cell broadcast network service, you can  
receive messages on various topics from your service  
provider, such as weather or traffic conditions in a  
particular region. For available topics and relevant  
topic numbers, contact your service provider. Cell  
broadcast messages cannot be received when the  
device is in the remote SIM mode. A packet data (GPRS)  
connection may prevent cell broadcast reception.  
Text message settings  
Cell broadcast messages cannot be received in UMTS  
Select Menu > Communic. > Messaging >  
(3G) networks.  
Options > Settings > Text message.  
To receive cell broadcast messages, you may need to  
set the cell broadcast reception on. Select Options >  
Settings > Reception > On.  
Select from the following:  
74  
             
Message centres — View the available message  
centres for your device, or create a new one.  
Message centre in use — Select a message centre  
to send the message.  
Image size — Select Small or Large to scale images  
in multimedia messages. Select Original to  
maintain the original image size.  
MMS creation mode — Select Restricted to have  
your device prevent you from including content in  
multimedia messages that may not be supported by  
the network or the receiving device. To receive  
warnings about including such content, select  
Guided. To create a multimedia message with no  
restrictions on attachment type, select Free. If you  
select Restricted, creating multimedia  
Character encoding — Select Reduced support to  
use automatic character conversion to another  
encoding system when available.  
Receive report — Select Yes if you want the  
network to send you delivery reports on your  
messages (network service).  
Message validity — Select how long the message  
centre resends your message if the first attempt fails  
(network service). If the recipient cannot be reached  
within the validity period, the message is deleted  
from the message centre.  
presentations is not possible.  
Access point in use — Select the default access  
point to connect to the multimedia message centre.  
You may not be able to change the default access  
point if it is preset in your device by your service  
provider.  
Message sent as — Convert the message to another  
format, such as Text, Fax, Paging, or E-mail.  
Change this option only if you are sure that your  
message centre is able toconverttextmessages into  
these other formats. Contact your service provider.  
Preferred connection — Select the preferred  
method of connection when sending text messages  
from your device.  
Multimedia retrieval — Select Always  
automatic to receive multimedia messages always  
automatically, Auto in home netw. to receive  
notification of a new multimedia message that you  
can retrieve from the message centre (for example,  
when you are travelling abroad and are outside your  
home network), Manual to retrieve multimedia  
messages from the message centre manually, or  
Off to prevent receipt of any multimedia messages.  
Allow anon. msgs. — Select whether you want to  
receive messages from unknown senders.  
Receive adverts — Select whether you want to  
receive messages defined as advertisements.  
Receive report — Select Yes to have the status of  
the sent message to be shown in the log (network  
service). Receiving a delivery report of a multimedia  
message that has been sent to an e-mail address  
may not be possible.  
Reply via same centre — Select whether you want  
the reply message to be sent using the same text  
message centre number (network service).  
Multimedia message  
settings  
Select Menu > Communic. > Messaging >  
Options > Settings > Multimedia message.  
75  
Select from the following:  
   
Deny report sending — Select Yes to not send  
delivery reports from your device for received  
multimedia messages.  
User settings  
To define the user settings for an e-mail account, select  
the account, select Options > Edit > User settings,  
and define the following settings:  
Message validity — Select how long the messaging  
centre tries to send the message (network service).  
If the recipient of a message cannot be reached  
within the validity period, the message is removed  
from the multimedia messaging centre. Maximum  
time is the maximum amount of time allowed by  
the network.  
My name — Enter a name to appear before your e-  
mail address when you send e-mail.  
Reply-to — Select whether you want replies to be  
redirected to a different address. Select On, and  
enter the e-mail address to which you want to direct  
the replies. You can only enter one address to which  
replies are directed.  
Delete e-mails from — Select whether you want  
to delete the e-mail messages only from the device  
or from both the device and the server. Select  
Always ask if you want to confirm from where the  
e-mail should be deleted every time you delete an  
e-mail.  
E-mail account settings  
Select Menu > Communic. > Messaging >  
Options > Settings > E-mail.  
If you try to edit mailbox settings but have not set up  
an e-mail account, the mailbox guide opens and helps  
you set up your e-mail account.  
Send message — Select to send the e-mail  
immediately or when a connection is available.  
Send copy to self — Select whether you want to  
save a copy of the e-mail to your remote mailbox  
and to the address defined in My e-mail address in  
the Outgoing e-mail settings.  
If you have defined a mailbox, scroll to it, and press the  
scroll key to edit the settings.  
The settings available for editing may vary. Some  
settings may be preset by your service provider.  
Include signature — Select whether you want to  
attach a signature to your e-mail messages.  
New e-mail alerts — Select whether you want to  
be notified of a new received e-mail message with  
a tone and a note.  
Connection settings  
To define the connection settings, select an e-mail  
account and Options > Edit > Connection  
settings. To editthesettingsfor the e-mailyoureceive,  
select Incoming e-mail. To edit the settings for the e-  
mail you send, select Outgoing e-mail.  
Retrieval settings  
To define the retrieval settings, select the e-mail  
account, select Options > Edit > Retrieval  
settings, and define the following settings:  
76  
             
E-mail to retrieve — Select whether you want to  
retrieve only the e-mail header information such as  
sender, subject and date, e-mail, or e-mail with  
attachments. This setting is for POP3 mailboxes  
only.  
E-mail notifications — Select whether you want  
to receive notifications on received e-mail.  
Service message settings  
Retrieval amount — Select the number of e-mail  
messages you want to retrieve from the remote  
server to your mailbox.  
Select Menu > Communic. > Messaging >  
Options > Settings > Service message.  
To receive service messages from service providers,  
IMAP4 folder path — Define the folder path for  
folders to be subscribed. This setting is for IMAP4  
mailboxes only.  
select Service messages > On.  
To select how to download services and service  
message content, select Download messages >  
Automatically or Manually. If you select  
Automatically, you may still need to confirm some  
downloads since not all services can be downloaded  
automatically.  
Folder subscriptions — Subscribe to other folders  
in the remote mailbox and retrieve content from  
those folders. This setting is for IMAP4 mailboxes  
only.  
Automatic retrieval settings  
To define the automatic retrieval settings for an e-mail  
account, select the account, select Options > Edit >  
Automatic retrieval, and define the following  
settings:  
Cell broadcast settings  
Select Menu > Communic. > Messaging >  
Options > Settings > Cell broadcast.  
E-mail retrieval — Select Enabled to retrieve new  
e-mail messages automatically from your remote  
mailbox, or Only in home netw. to retrieve new e-  
mail messages automatically from your remote  
mailbox only when you are in your home network  
and not, for example, travelling.  
To receive cell broadcast messages, select  
Reception > On.  
To select the languages in which you want to receive  
cell broadcast messages, select Language.  
To display new topics in the cell broadcast topics list,  
Retrieval days — Select the days on which e-mail  
is retrieved to your device.  
select Topic detection > On.  
Retrieval hours — Define the hours between  
which the e-mail is retrieved.  
Other settings  
Retrieval interval — Select the interval between  
retrieving new e-mail messages.  
Select Menu > Communic. > Messaging >  
77  
Options > Settings > Other.  
               
Select from the following:  
Save sent messages — Select whether to store  
sent messages in the Sent folder.  
Number of saved msgs. — Enter the number of  
sent messages to save. When the limit is reached,  
the oldest message is deleted.  
Memory in use — Select where to save your  
messages. You can save messages to the memory  
card only if a memory card is inserted.  
Folder view — Define how you want the messages  
in Inbox to be shown.  
78  
Phone  
To make and receive calls, the device must be switched key to answer a new incoming call. The first call is put  
on, the device must have a valid SIM card installed, and on hold. To end the active call, press the end key.  
you must be located in the service area of a cellular  
network.  
Make a call  
To make or receive a net call, your device must be  
connected to a net call service. To connect to a net call  
service, your device must be in the coverage of a  
connection network, such as a WLAN access point.  
Important: If the device has been locked, enter  
the lock code to activate the phone function. When the  
device is locked, calls may be possible to the official  
emergency number. Making an emergency call in the  
offline profile or when the device is locked requires  
that the device recognise the number to be an official  
emergency number. It is advisable to change the  
profile or unlock the device by entering the lock code  
before you make the emergency call.  
Voice calls  
Note: The actual invoice for calls and services  
from your service provider may vary, depending on  
network features, rounding off for billing, taxes, and  
so forth.  
To make a call, enter the phone number, including the  
area code, and press the call key.  
Tip: For international calls, add the + character  
that replaces the international access code, and  
enter the country code, area code (omit the  
leading 0, if necessary), and phone number.  
Answer a call  
To answer a call, press the call key.  
To reject a call, press the end key.  
To end the call or cancel the call attempt, press the end  
key.  
To mute the ringing tone instead of answering a call,  
select Silence.  
To make a call using the saved contacts, press the  
contacts key. Enter the first letters of the name, scroll  
79  
When you have an active call and the call waiting  
function (network service) is activated, press the call  
           
to the name, and press the call key. See "Nokia Contacts  
for Eseries", p. 34.  
Video calls  
To make a call using the log, press the call key to view  
up to 20 numbers that you last called or attempted to  
call. Scroll to the desired number or name, and press  
the call key. See "Log", p. 89.  
To be able to make a video call, you need to be in the  
coverage of a UMTS network. For availability of and  
subscription to video call services, contact your  
network operator or service provider. While talking,  
you can see a real-time, two-way video between you  
and the recipient of the call, if the recipient has a  
compatible mobile phone. The video image captured  
by the camera in your device is shown to the video call  
recipient. A video call can only be made between two  
parties.  
To adjust the volume of an active call, use the volume  
keys.  
To switch from a voice call to a video call, select  
Options > Switch to video call. The device ends the  
voice call and makes a video call to the recipient.  
Make a conference call  
Make a video call  
1. To make a conference call, enter a participant's  
phone number, and press the call key.  
Warning: Do not hold the device near your ear  
when the loudspeaker is in use, because the volume  
may be extremely loud.  
2. When the participant answers, select Options >  
New call.  
3. When you have made a phone call to all the  
participants, select Options > Conference to  
merge the calls into a conference call.  
To make a video call, enter the phone number or select  
the recipient of the call from Contacts, and select  
Options > Call > Video call. When the video call  
starts, the camera of the device is activated. If the  
camera is already in use, video sending is disabled. If  
the recipient of the call does not want to send a video  
back to you, a still image is shown instead. You can  
define the still image in Menu > Tools > Settings >  
Phone > Call > Image in video call.  
To mute the microphone of your device during the call,  
select Options > Mute.  
To drop a participant from the conference call, scroll to  
the participant, and select Options > Conference >  
Drop participant.  
To discuss privately with a conference call participant,  
scroll to the participant, and select Options >  
Conference > Private.  
To disable the sending of audio, video, or video and  
audio, select Options > Disable > Sending audio,  
Sending video, or Sending aud. & video.  
80  
         
To use the loudspeaker for receiving audio, select  
Options > Activate loudspeaker. To mute the  
loudspeaker and use the earpiece, select Options >  
Activate handset.  
4. To end sharing the video, select Stop. The voice call  
continues normally.  
Receive a video sharing  
invitation  
To swap the places of images, select Options >  
Change image order.  
To zoom the image on the display, select Options >  
When you receive a video sharing invitation, a message  
is displayed showing the caller's name or SIP address.  
Zoom in or Zoom out.  
To end the video call and make a new voice call to the  
same recipient, select Options > Switch to voice  
call.  
To accept the invitation and begin the sharing session,  
select Accept.  
To reject the invitation, select Reject. The voice call  
continues normally.  
Share a video  
Use Video sharing (network service) to send live video  
or a video clip from your mobile device to another  
compatible mobile device during a voice call. To use  
this feature, the device must be within the coverage of  
a UMTS network.  
Net calls  
Select Menu > Communic. > Internet tel..  
Your device supports voice calls over the internet (net  
calls). Your device attempts emergency calls primarily  
over cellular networks. If an emergency call using  
cellular networks is not successful, your device  
attempts an emergency call through your net call  
provider. Due to the established nature of cellular  
telephony, you should use cellular networks for  
emergency calls, if possible. If you have cellular  
network coverage available, make sure that your  
cellular phone is switched on and ready to make calls  
before you attempt an emergency call. The capability  
for an emergency call using internet telephony  
depends on the availability of a WLAN and your net call  
provider's implementation of emergency call  
1. Make a phone call to the selected recipient. You can  
start sharing a video once the phone call is  
established and your device has been registered to  
the SIP server.  
2. To send live video or a video clip from your device,  
select Options > Share video > Live or Clip. To  
preview the clip, select Options > Play.  
3. Select the recipient from Contacts, or enter the  
recipient's SIP address manually to send an  
invitation to the recipient. Sharing begins  
automatically when the recipient accepts the video  
sharing.  
81  
         
capabilities. Contact your net call provider to check the To login to the net call service manually, select  
internet telephony emergency call capability.  
Registration > When needed in the SIP settings  
when creating a net call profile.  
With the net call service (network service), you can  
make and receive calls over the internet using the VoIP  
(voice over internet protocol) technology. Net calls can  
be established between computers, between mobile  
phones, and between a VoIP device and a traditional  
telephone. To make or receive a net call, your device  
must be within WLAN coverage, for example. The  
availability of the net call service may vary according  
to your country or area.  
To make secure net calls, ask your service provider for  
secure net call settings. The proxy server selected for  
the net call profile must support secure net calls. A  
secure net call is indicated with  
.
Connect to the net call  
service  
Select Menu > Communic. > Internet tel..  
Create a net call profile  
To make or receive a net call, your device must be  
connected to a net call service. If you have selected  
automatic login, your device automatically connects to  
the net call service. If you login to the service manually,  
select an available network from the list and Select.  
Before you can make net calls, you need to create a net  
call profile.  
1. Select Menu > Tools > Settings >  
Connection > SIP settings > Options > New  
SIP profile, and enter the required information. To  
make the login to the net call service automatic,  
select Registration > Always on. Contact your net  
call provider for the correct settings.  
The list of networks is refreshed automatically every 15  
seconds. To refresh the list manually, select Options >  
Refresh. Use this option if your WLAN is not shown on  
the list.  
To select a net call service for outgoing calls if the  
device is connected to more than one service, select  
Options > Change service.  
To configure new services, select Options >  
Configure service. This option is shown only if there  
are services that have not been configured.  
2. Select Back until you return to the Connection  
settings main view.  
3. Select Internet tel. > Options > New profile.  
Enter a name for the profile, and select the SIP  
profile you just created.  
To set the created profile to be used automatically  
when connecting to the net call service, select Menu >  
Communic. > Internet tel. > Preferred profile.  
To save the network to which you are currently  
connected, select Options > Save network. The  
saved networks are marked with a star on the list of  
networks.  
82  
       
To connect to a net call service using a hidden WLAN,  
WLANs, which increases the demand on battery power  
and reduces the battery life.  
select Options > Use hidden network.  
To end the connection to a net call service, select  
To login manually to the net call service, select Login  
Options > Disconnect from service.  
type > Manual.  
To view the networks you have saved for the net call  
service and the networks detected by the net call  
service, select Saved conn. networks.  
To define the service-specific settings, select Edit  
service settings. This option is only available if a  
service-specific software plug-in has been installed in  
the device.  
Make net calls  
You can make a net call from all applications where you  
can make a regular voice call. For example in Contacts,  
scroll to the desired contact, and select Call > Internet  
call.  
To make a net call in the home screen, enter the SIP  
address, and press the call key.  
Speed dialling  
To make a net call to an address that does not start with  
a digit, press any number key when the device is in the  
standby mode, then press # for a few seconds to clear  
the display and to switch the device from the number  
mode to the letter mode. Enter the address, and press  
the call key.  
Select Menu > Tools > Settings > Phone > Call >  
Speed dialling > On.  
Speed dialling allows you to make a call by pressing  
and holding a number key when in the home screen.  
To assign a number key to a phone number, select  
Menu > Communic. > Speed dial. Scroll to the  
number key (2 - 9) on the display, and select Options >  
Assign. Select the desired number from Contacts.  
To set net call as the preferred call type for outgoing  
calls, select Menu > Communic. > Internet tel. >  
Options > Settings > Default call type > Internet  
call. When your device is connected to a net call service,  
all calls are made as net calls.  
To delete the phone number assigned to a number key,  
scroll to the speed dialling key, and select Options >  
Remove.  
Net call service settings  
To modify a phone number assigned to a number key,  
scroll to the speed dialling key, and select Options >  
Change.  
Select Options > Settings, scroll to the settings of the  
desired service, and press the scroll key.  
To login automatically to the net call service, select  
Login type > Automatic. If you use the automatic  
login type for WLANs, the device periodically scans for  
83  
           
To stop diverting calls, scroll to the diverting option,  
Call divert  
and select Options > Cancel.  
Select Menu > Tools > Settings > Phone > Call  
divert.  
Call barring  
Divert incoming calls to your voice mailbox or to  
another phone number. For details, contact your  
service provider.  
Select Menu > Tools > Settings > Phone > Call  
barring.  
Select to divert voice, data, or fax calls, and select from  
You can bar the calls that can be made or received with  
the device (network service). To change the settings,  
you need the barring password from your service  
provider. Call barring affects all call types.  
the following options:  
All voice calls, All data calls, or All fax  
calls — Divert all incoming voice, data, or fax calls.  
If busy — Divert incoming calls when you have an  
active call.  
Call barring and call diverting cannot be active at the  
same time.  
If not answered — Divert incoming calls after your  
device rings for a specified period of time. Select the  
time you let the device ring before diverting the call  
in the Delay time: list.  
When calls are barred, calls may be possible to certain  
official emergency numbers.  
To bar calls, select Voice call barring and from the  
following options:  
If out of reach — Divert calls when the device is  
switched off or out of network coverage.  
If not available — Activate the last three settings  
at the same time. This option diverts calls if your  
device is busy, not answered, or out of reach.  
Outgoing calls — Prevent making voice calls with  
your device.  
Incoming calls — Prevent incoming calls.  
International calls — Prevent calling to foreign  
countries or regions.  
To divert calls to your voice mailbox, select a call type  
and a diverting option, then select Options >  
Activate > To voice mailbox.  
Incoming calls when abroad — Prevent incoming  
calls when outside your home country.  
International calls except to home country  
— Prevent calls to foreign countries or regions, but  
allow calls to your home country.  
To divert calls to another phone number, select a call  
type and a diverting option, then select Options >  
Activate > To other number. Enter a number in the  
Number: field, or select Find to retrieve a number  
saved in Contacts.  
To check the status of voice call barrings, select the  
barring option and Options > Check status.  
To stop all voice call barrings, select a barring option  
To check the current diverting status, scroll to the  
84  
and Options > Cancel all barrings.  
diverting option, and select Options > Check status.  
       
To changethe password used for barring voice, fax, and  
data calls, select Voice call barring > Options > Edit  
barring password. Enter the current code, then the  
new code twice. The barring password must be four  
digits long. For details, contact your service provider.  
To set the device to send the DTMF tones only after  
you select Send DTMF during a call, enter w.  
3. Select Done.  
Voice mail  
Bar net calls  
Select Menu > Communic. > Call mailbox.  
When you open the Voice mail application for the first  
time, you are asked to enter the number of your voice  
mailbox.  
Select Menu > Tools > Settings > Phone > Call  
barring > Internet call barring.  
To reject net calls from anonymous callers, select  
To call your voice mail, select Options > Call voice  
Anonymous call barring > On.  
mailbox.  
If you have configured net call settings to your device  
and have an internet call mailbox, select Internet call  
mailbox > Options > Call internet call mbx. to call  
it.  
Send DTMF tones  
You can send dual tone multi-frequency (DTMF) tones  
during an active call to control your voice mailbox or  
other automated phone services.  
To call your voice mail when in the home screen, press  
and hold 1; or press 1 and then the call key. If you have  
defined an internet call mailbox, select whether you  
want to call your voice mail or internet call mailbox.  
Send a DTMF tone sequence  
1. Make a call, and wait until the other end answers.  
2. Select Options > Send DTMF.  
To change the voice mailbox number, select the  
mailbox and Options > Change number.  
3. Enter the DTMF tone sequence, or select a  
To change the internet call mailbox address, select the  
predefined sequence.  
mailbox and Options > Change address.  
Attach a DTMF tone sequence to a contact  
card  
1. Select Menu > Communic. > Contacts. Open a  
contact, and select Options > Edit > Options >  
Add detail > DTMF.  
Voice aid  
Select Menu > Tools > Voice aid.  
85  
2. Enter the tone sequence. To insert a pause of about  
2 seconds before or between DTMF tones, enter p.  
               
The Voice aid application reads text on the display,  
allowing you to use the basic functions of your device  
without looking at the display.  
To hear the entries in your contacts list, select  
Contacts. Do not use this option if you have more than  
500 contacts.  
The device creates a voice tag for the entries in Contacts  
and for the functions designated in the Voice  
commands application. When a voice command is  
spoken, the device compares the spoken words to the  
voice tag in the device. Voice commands are not  
dependent on a speaker’s voice; however, the voice  
recognition in the device adapts to the main user’s  
voice to recognise voice commands better.  
To hear information on your missed and received calls,  
dialled numbers, and frequent calls, select Recent  
calls.  
Make a call  
To listen to your voice messages, select Voice  
mailbox.  
A voice tag for a contact is the name or nickname that  
is saved on the contact in Contacts.  
To dial a telephone number, select Dialler.  
To use voice commands to make a phone call, select  
Note: Using voice tags may be difficult in a noisy  
environment or during an emergency, so you should  
not rely solely upon voice dialing in all circumstances.  
Voice commands.  
To have your received messages read aloud, select  
Message reader.  
To listen to a voice tag, open a contact, and select  
To hear the current time, select Clock. To hear the  
Options > Play voice tag.  
current date, scroll down.  
1. To make a call using a voice command, press and  
If the Voice aid application is open when a calendar  
alarm is due, the application reads the calendar alarm  
content aloud.  
hold the voice key.  
2. When you hear the tone or see the visual display,  
clearly speak the name saved on the contact.  
To hear more options, select Options.  
3. The device plays a synthesised voice tag for the  
recognised contact in the selected device language,  
and displays the name and number. After a timeout  
of 1.5 seconds, the device dials the number. If the  
recognised contact was not correct, select Next to  
view a list of other matches or Quit to cancel  
dialling.  
Voice commands  
Select Menu > Tools > Voice comm..  
Use voice commands to make phone calls and launch  
applications, profiles, or other functions on the device.  
If several numbers are saved under the contact, the  
86  
device selects the default number, if it has been set.  
     
Otherwise, the device selects the first available  
number of the following fields: Mobile, Mobile  
(home), Mobile (business), Telephone, Tel.  
(home), and Tel. (business).  
Voice command settings  
To switch off the synthesiser that plays recognised  
voice commands in the selected device language,  
select Options > Settings > Synthesiser > Off.  
To reset voice recognition learning when the main user  
of the device has changed, select Remove voice  
adapts..  
Launch an application  
The device creates voice tags for the applications listed  
in the Voice commands application.  
To launch an application using a voice command, press  
and hold the voice key, and clearly speak the name of  
the application. If the recognised application was not  
correct, select Next to view a list of other matches or  
Quit to cancel.  
Push to talk  
Select Menu > Communic. > PTT.  
Push to talk (PTT) (network service) provides direct  
voice communication connected with the pushofa key.  
With PTT, you can use your device as a walkie-talkie.  
To add more applications to the list, select Options >  
New application.  
To change the voice command of an application, select  
Options > Change command, and enter the new  
command.  
You can use PTT to havea conversation withone person  
or with a group of people, or join a channel. A channel  
is like a chat room: you can call the channel to see if  
anyone is online. The channel call does not alert the  
other users; the users just join the channel and start  
speaking with each other.  
Change profiles  
In PTT communication, one person talks while the  
other users listen through the built-in loudspeaker.  
Users take turns responding to each other. Because  
only one user can talk at a time, the maximum duration  
of a speech turn is limited. For details of the speech turn  
duration for your network, contact your service  
provider.  
The device creates a voice tag for each profile. To set  
on a profile using a voice command, press and hold the  
voice key, and say the name of the profile.  
To change the voice command, select Profiles >  
Options > Change command.  
87  
             
loudspeaker with your hands. Press and hold the voice  
key the entire time you are talking. When you have  
finished talking, release the key.  
PTT settings  
Select Options > Settings and select User settings to  
define your preferences for PTT, or Connection  
settings to change the connection details. Contact  
your service provider for the correct settings.  
To end the PTT call, press the end key.  
When you receive a PTT call, press the call key to answer  
the call or the end key to dismiss the call.  
Tip: You may also receive the settings in a  
message from the provider of the PTT service.  
Created PTT calls  
Select Options > PTT log > Created PTT, and a call.  
Log in to PTT service  
To make a PTT call to a contact, select Options > Talk  
If you have set Application start-up on in User  
settings, PTT automatically logs in to the service when  
started. If not, you must log in manually.  
1 to 1.  
To send a request to a contact to call you, select  
Options > Send callback request.  
To log in to the PTT service manually, select Options >  
Log in to PTT.  
To create a contact, select Options > Save to  
Contacts.  
When the Ringing type setting of your device is set to  
Beep once or Silent, or there is an ongoing phone call,  
you cannot make or receive PTT calls.  
Manage PTT contacts  
To view, add, modify, delete, or call contacts, select  
Options > Contacts. A list of names from the Contacts  
application is displayed with information about their  
login status.  
Make a PTT call  
Warning: Do not hold the device near your ear  
when the loudspeaker is in use, because the volume  
may be extremely loud.  
To make a PTT call, select Options > Contacts, select  
one or several contacts from the list, and press the  
voice key. Remember to hold the device in front of you  
during the call so you can see the display. The display  
informs you when it is your turn to speak. Speak  
towards the microphone, and do not cover the  
To call a selected contact, select Options > Talk 1 to  
1.  
To make a group call, select several contacts and  
Options > Talk to many.  
To send the contact a request to call you, select  
Options > Send callback request.  
88  
                   
To answer a callback request, select Show to open the functions, the device is switched on and within the  
callback request. To make a PTT call to the sender, press network service area.  
the voice key.  
Call and data registers  
Create a PTT channel  
To view recently missed, received, and dialled calls,  
To create a channel, select Options > New  
select Recent calls.  
channel > Create new.  
Tip: To open Dialled numbers when in the  
home screen, press the call key.  
To join a channel, select the channel you want to talk  
to, and press the voice key.  
To view the approximate duration of calls to and from  
To invite a user to a channel, select Options > Send  
your device, select Call duration.  
invitation.  
To view the amount of data transferred during packet  
To view the currently active users of a channel, select  
data connections, select Packet data.  
Options > Active members.  
When you log in to PTT, you are automatically  
connected to the channels that were active when the  
application was last closed.  
Monitor all communications  
To monitor all voice calls, text messages, or data  
connections registered by the device, open the general  
log tab.  
Exit PTT  
To view detailed information about a communication  
To exit PTT, select Options > Exit. Select Yes to log  
out and close the service. Select No if you want to keep  
the application active in the background.  
event, scroll to it, and press the scroll key.  
Tip: Subevents, such as a text message sent in  
more than one part and packet data  
connections, are logged as one communication  
event. Connections to your mailbox, multimedia  
messaging centre, or web pages are shown as  
packet data connections.  
Log  
Select Menu > Log.  
To add the phone number from a communication event  
to Contacts, select Options > Save to Contacts, and  
select to create a new contact or to add the phone  
number to an existing contact.  
Log stores information about the communication  
history of the device. The device registers missed and  
received calls only if the network supports these  
89  
                 
To copy the number, for example to paste it to a text  
message, select Options > Use number > Copy.  
To view a single type of communication event or  
communication events with one other party, select  
Options > Filter, and select the desired filter.  
To erase the contents of the log, recent calls register,  
and messaging delivery reports permanently, select  
Options > Clear log.  
Call and send messages from  
Log  
To call back a caller, select Recent calls and open  
Missed calls, Received calls, or Dialled numbers.  
Select the caller, and Options > Call.  
To reply to a caller with a message, select Recent  
calls and open Missed calls, Received calls, or Dialled  
numbers. Select the caller, and select Options >  
Create message. You can send text messages and  
multimedia messages.  
Log settings  
To set the time for keeping all communication events  
in the log, select Options > Settings > Log  
duration, and the time. If you select No log, all log  
contents are permanently deleted.  
90  
       
Travelling  
Need directions? Looking for a restaurant? Your Eseries affected by poor satellite geometry. Availability and  
device has the tools to get you where you want to be.  
quality of GPS signals may be affected by your location,  
buildings, natural obstacles, and weather conditions.  
The GPS receiver should only be used outdoors to allow  
reception of GPS signals.  
About GPS and  
satellite signals  
Any GPS should not be used for precise location  
measurement, and you should never rely solely on  
location data from the GPS receiver and cellular radio  
networks for positioning or navigation.  
The Global Positioning System (GPS) is a worldwide  
radio navigation system that includes 24 satellites and  
their ground stations that monitor the operation of the  
satellites. Your device has an internal GPS receiver.  
The trip meter has limited accuracy, and rounding  
errors may occur. Accuracy can also be affected by  
availability and quality of GPS signals.  
A GPS terminal receives low-power radio signals from  
the satellites and measures the travel time of the  
signals. From the travel time, the GPS receiver can  
calculate its location to the accuracy of metres.  
To enable or disable different positioning methods,  
such as Bluetooth GPS, select Menu > Tools >  
Settings > General > Positioning > Positioning  
methods.  
The coordinates in the GPS are expressed in degrees  
and decimal degrees format using the international  
WGS-84 coordinate system.  
About satellite signals  
If your device cannot find the satellite signal, consider  
the following:  
The Global Positioning System (GPS) is operated by the  
government of the United States, which is solely  
responsible for its accuracy and maintenance. The  
accuracy of location data can be affected by  
If you are indoors, go outdoors to receive a better  
signal.  
If the numeric keypad slide is closed, open it.  
If you are outdoors, move to a more open space.  
adjustments to GPSsatellitesmade bytheUnitedStates  
government and is subject to change with the United  
States Department of Defense civil GPS policy and the  
Federal Radionavigation Plan. Accuracy can also be  
Ensure that your hand does not cover the GPS  
91  
antenna of your device.  
   
If the weather conditions are bad, the signal  
strength may be affected.  
Maps  
Establishing a GPS connection may take from a  
Select Menu > GPS > Maps.  
couple of seconds to several minutes.  
With Maps, you can see your current location on the  
map, browse maps for different cities and countries,  
search for addresses and different points of interest,  
plan routes from one location to another, and save  
locations and send them to compatible devices. You  
can also purchase licences for extra services, such as  
travel guides, traffic information, and navigation  
service with voice guidance. These services are not  
available for all countries or regions.  
Satellite status  
To check how many satellites your device has found,  
and whether your device is receiving satellite signals,  
select Menu > GPS > GPS data > Position >  
Options > Satellite status. If your device has found  
satellites, a bar for each satellite is shown in the  
satellite info view. The longer the bar, the stronger the  
satellite signal. When your device has received enough  
data from the satellite signal to calculate the  
If you browse to an area which is not covered by maps  
already downloaded in your device, a map for the area  
is automatically downloaded through the internet.  
Some maps may be available in your device or memory  
card. You can also use the Nokia Map Loader PC  
software to download maps. To install Nokia Map  
Loader to a compatible PC, go to  
coordinates of your location, the bar turns black.  
Initially your device must receive signals from at least  
four satellites to be able to calculate the coordinates of  
your location. When the initial calculation has been  
made, it may be possible to continue calculating the  
coordinates of your location with three satellites.  
However, the accuracy is generally better when more  
satellites are found.  
www.maps.nokia.com.  
Downloading maps may involve the transmission of  
large amounts of data through your service provider's  
network. Contact your service provider for information  
about data transmission charges.  
Positioning settings  
When you use Maps for the first time, you may need to  
select an access point for downloading maps. To  
change the access point later, select Options >  
Tools > Settings > Internet > Default access  
point.  
Select Menu > Tools > Settings > General >  
Positioning.  
To use a specific positioning method to detect the  
location of your device, select Positioning methods.  
To select a positioning server, select Positioning  
server.  
92  
       
is shown. The map of the location is also downloaded,  
if needed.  
About Maps  
To connect to the internet automatically when you  
start Maps, select Options > Tools > Settings >  
Internet > Go online at start-up > Yes.  
To zoom in to your GPS position or your last known  
location, press the function key and 0.  
When the GPS connection is active,  
shows your  
To prevent automatic downloading of maps, select  
Options > Tools > Settings > Internet > Go  
online at start-up > Never.  
To set the device to ask your permission before  
connecting to the internet, select Options > Tools >  
Settings > Internet > Go online at start-up >  
Always ask.  
current location on the map.  
To move on the map, scroll up, down, left, or right with  
the scroll key. The map is oriented towards north by  
default.  
To zoom in and out on the map, press the function key  
and *, or the function key and #.  
When you browse the map on the display, a new map  
is automatically downloaded if you scroll to an area  
which is not covered by maps already downloaded.  
These maps are free of charge, but downloading may  
involve the transmission of large amounts of data  
through your service provider's network. For more  
information on data transmission charges, contact  
your service provider. The maps are automatically  
saved in the device memory or on a compatible  
memory card (if inserted).  
To be informed when your device registers to a  
network other than your home network, select  
Options > Tools > Settings > Internet >  
Roaming warning > On (shown only when you are  
online). For details and roaming costs, contact your  
service provider.  
Tip: To avoid data transfer costs, you can also  
use Maps without an internet connection, and  
browse the maps that are saved in your device  
or memory card.  
Almost all digital cartography is inaccurate and  
incomplete to some extent. Never rely solely on the  
cartography that you download for use in this device.  
Display indicators  
The GPS indicator  
on the bottom right  
corner of the display shows the availability and  
strength of the satellite signal. One bar is one satellite.  
When the device tries to find a satellite, the bar is  
yellow. When the device receives enough data from the  
satellite to establish a GPS connection, the bar turns  
green. The more green bars, the stronger the GPS  
connection.  
Move on a map  
The map coverage varies by country and region.  
When you open Maps, the capital of the country you are  
in or the location that was saved from your last session  
93  
           
Initially, your device must receive signals from at least  
four satellites to calculate the coordinates of your  
location. After the initial calculation, signals from three  
satellites may be enough.  
Plan a route  
To plan a route, select your start point on the map or  
search for a location, press the scroll key, and select  
Add to route.  
The data transfer indicator  
shows the  
To define the destination and add more locations for  
your route, select Options > Add route point, and  
search for the location.  
internet connection used and the amount of data  
transferred since the application started.  
To switch between walking or driving mode, select  
Find locations  
Options > Settings > Transport mode  
To find a location in the city or area displayed on the  
map, enter the full or partial address of the location in  
the search field, and press the scroll key. To find a  
location in another city, enter the city and the full or  
partial address, such as London Oxford Street, and  
press the scroll key.  
To show the route on the map, select Options > Show  
route.  
To navigate to the destination by car or on foot, if you  
have purchased a licence for these extra services, select  
Options > Start driving or Start walking .  
To save the route, select Options > Save route.  
To find a specific address, or an address in another  
country, select Options > Search > Addresses.  
Country/Region * and City or post code are  
mandatory.  
Walk to your destination  
Tip: To search for locations in another country  
using the search field, enter also the name of the  
country in the search field: Rome Italy.  
The walking route ignores any possible limitations to  
car navigation, such as one-way streets and turn  
restrictions, and includes areas such as pedestrian  
zones and parks. It also prioritises walkways and  
smaller roads, and omits highways and motorways.  
To import a location address from the Contacts  
application, select Options > Search > Addresses >  
Options > Select from Contacts.  
The route is drawn to the map, and the arrow indicates  
the direction. The small dots show in which direction  
you are walking.  
The search results are grouped by categories. To limit  
the search to one category, select Options > Search.  
The length of a walking route is limited to a maximum  
of 50 kilometres (31 miles) and the travelling speed to  
a maximum of 30 km/h (18 miles/h). If the speed limit  
is exceeded, navigation stops and is resumed once the  
speed is back within limits.  
If you search for locations without an internet  
connection, the search results are limited to a radius of  
50 km (31 miles).  
94  
           
There is no voice guidance available for pedestrian  
navigation.  
language of the voice guidance and download the  
related voice guidance files. To change the language  
later, in the main view, select Options > Tools >  
Settings > Navigation > Voice guidance. Voice  
guidance is not available for pedestrian navigation.  
To purchase a licence for pedestrian navigation, select  
Options > Extras > Walk. The licence is region-  
specific and can be used only in the selected area. You  
can pay for the licence through a credit card or in your To switch between different views during the  
phone bill, if supported by your service provider.  
navigation, press the scroll key, and select Manoeuvre  
view, Bird's-eye view, or Arrow view.  
Tip: To try out navigation for three days with a  
free licence, press the scroll key, and select Walk  
to. Maps checks if a free licence is available for  
your device. To activate the licence, select OK.  
You can only use the licence once.  
To find an alternative route, select Options > Diff.  
route.  
To repeat the voice guidance, select Options >  
Repeat.  
To start navigating, select a location and Options >  
To stop navigating, select Stop.  
Walk to.  
To find an alternative route, select Options >  
Different route.  
Traffic information  
To stop navigating, select Stop.  
The real-time traffic information service provides  
information about traffic events that may affect your  
travel. The traffic information service is an extra service  
that you can purchase and download into your device,  
if available in your country or region.  
Drive to your destination  
To purchase a licence for pedestrian and car navigation  
with voice guidance, select Options > Extras > Drive  
& Walk. The licence is region-specific and can be used  
only in the selected area.  
To purchase a licence for the traffic informationservice,  
select Options > Extras > Traffic info.  
To view information about traffic events, select  
Options > Traffic info. The events are shown on the  
map as triangles and lines.  
Tip: To try out navigation for three days with a  
free licence, press the scroll key, and select Drive  
to. Maps checks if a free licence is available for  
your device. To activate the licence, select OK.  
You can only use the licence once.  
To view the details of an event, including possible  
rerouting options, select the event and Options >  
Open.  
To start navigating by car, select a location, press the  
scroll key, and select Drive to. When you use car  
navigation for the first time, you are asked to select the  
To update the traffic information, select Update traffic  
95  
info.  
       
distance and duration you have travelled, and your  
average and maximum speeds.  
Travel guides  
Travel guides provide information about attractions,  
restaurants, hotels, and other points of interest. Some  
guides contain videos and audio clips. The guides must  
be purchased and downloaded before use.  
The application must receive positioning information  
from at least four satellites to be used as a travelling  
aid.  
The trip meter has limited accuracy, and rounding  
errors may occur. Accuracy can also be affected by  
availability and quality of GPS signals.  
Downloading travel guides may involve the  
transmission of large amounts of data through your  
service provider’s network. Contact your service  
provider for information about data transmission  
charges.  
To purchase and download travel guides, or to view  
downloaded ones, select Options > Extras >  
Guides.  
To browse travel guide categories, select a category,  
and press the scroll key. If there are subcategories,  
select a subcategory, and press the scroll key again.  
Use GPS data  
To check the signal strength of the satellites that  
provide the positioning information necessary for  
navigation, open any of the three views and select  
Options > Satellite status.  
To set a landmark or location as the destination of your  
trip, select Navigation > Options > Set  
destination. You can also enter the destination  
latitude and longitude coordinates.  
To download a new guide to your device, scroll to the  
desired guide, and select Yes. You can pay for the  
guides through a credit card or in your phone bill, if  
supported by your service provider.  
To remove the destination set for your trip, select  
Navigation > Options > Stop navigation.  
To save your current position as a landmark, select  
Navigation or Position, and Options > Save  
position.  
GPS data  
Select Menu > GPS > GPS data.  
To activate the trip meter, select Trip distance >  
Options > Start. To stop the trip meter, select  
Options > Stop.  
With GPS data, you can view your current location, find  
your way to a desired location, and track distance.  
To reset all fields and start calculating the trip again,  
Select Navigation to view navigating information to  
your trip destination, Position to view positioning  
information about your current location, or Trip dist.  
to view your travelling information such as the  
select Trip distance > Options > Restart.  
96  
         
To change the measuring system in use, select  
Options > Settings > Measurement system >  
Metric or Imperial.  
Select categories — Organise the landmark to a  
group of similar landmarks. Select a category to  
modify landmark information such as a name,  
category, address, latitude, longitude, and altitude.  
Retrieve current position — Request and  
automatically fill in the geographical latitude and  
longitude coordinates to make a landmark of your  
current location.  
To enter the altitude calibration to correct the altitude  
received from the positioning satellites, select  
Options > Settings > Altitude calibration.  
Delete — Remove the landmark.  
Landmarks  
Landmarkicon — Change the iconof thelandmark.  
Show on map — Show the landmark on the map.  
Send — Send the landmark to compatible devices.  
Editing options — Edit the phone numbers and  
URL addresses assigned to the landmark.  
Select Menu > GPS > Landmarks.  
Landmarks are coordinates to geographic locations  
that you can save to your device for later use in  
different location-based services. You can create  
landmarks using the internal GPS receiver of your  
device or network (network service).  
Writing language — Change the writinglanguage.  
Landmark categories  
You can see the landmark categories in two views: one  
lists categories that already contain landmarks, and  
the other lists all the categories your device has.  
Create a landmark  
To create a landmark, select Options > New  
landmark. Select Current position to make a network  
request for the latitude and longitude coordinates of  
your current location, Select from map to select the  
location from a map, or Enter manually to fill in  
necessary location information such as a name,  
category, address, latitude, longitude, and altitude.  
To view the landmarks that a category contains, scroll  
to the category, and press the scroll key.  
To create a new category, select Options > Edit  
categories > Options > New category.  
To move a landmark from one category to another,  
open the landmarks tab, select the landmark, and  
Options > Add to category. Select the old category  
to remove the mark next to it. Select the category or  
categories to which you want to add the landmark.  
Select Accept.  
To show the landmark on the map, select Options >  
Show on map.  
Edit landmarks  
97  
To edit a landmark, select Options > Edit >  
Options and from the following:  
             
Receive landmarks  
Select Menu > Communic. > Messaging.  
Open a message that contains a landmark you have  
received from another device. Scroll to the landmark,  
and press the scroll key.  
To save the landmark in your device, select Options >  
Save.  
To forward the landmark to compatible devices, select  
Options > Send.  
To show the received landmark on the map, select  
Options > Show on map.  
To find out how to navigate to the received landmark,  
select Options > Show route.  
98  
   
Nokia Office Tools  
Nokia Office Tools support mobile business and enable To add boldface, italics, or underlining to your text or  
effective communication with work teams.  
change the font colour, press and hold the shift key and  
use the scroll key to select the text. Then select  
Options > Text.  
Active notes  
To send the note, select Options > Send.  
To link a note to a contact, select Options > Link note  
to call > Add contacts. You can see the note on the  
display of your device when making a call to or  
receiving a call from the contact.  
Select Menu > Office > Active notes.  
Active notes allows you to create, edit, and view  
different kinds of notes, for example, meeting memos,  
hobby notes, or shopping lists. You can insert images,  
videos, and sound in the notes. You can link notes to  
other applications, such as Contacts, and send notes to  
others.  
Settings for Active notes  
Select Settings.  
To save notes to your device memory, select Memory  
in use > Phone memory. To save them to a memory  
card, select Memory in use > Memory card.  
Create and edit notes  
To create a note, start writing.  
To edit a note, scroll to it, and press the scroll key.  
To insert images, sound clips, video, business cards,  
web bookmarks, and files, select Options > Insert  
object.  
To add new items to the note, select Options > Insert  
new. You can record sound and video clips, and capture  
images.  
To change the layout of active notes, select Change  
view > Grid. To view the notes as a list, select Change  
view > List.  
To see a note in the background when making or  
receiving phone calls, select Show note during call >  
Yes.  
Tip: If you temporarily do not want to see the  
notes during phone calls, select Show note  
during call > No. This way you do not have to  
99  
           
remove the links between notes and contact  
cards.  
rename, send, and search for files and folders.  
Copyright protection may prevent sending some files.  
Open the device tab or the memory card tab.  
To select multiple files, scroll to each file, and select  
Calculator  
Options > Mark/Unmark > Mark.  
Select Menu > Office > Calculator.  
To send the selected files, select Options > Send.  
This calculator has limited accuracy and is designed for  
To move or copy files or folders to another folder, select  
Options > Move to folder or Copy to folder. Default  
folders such as Sound clips in Gallery cannot be moved.  
simple calculations.  
To make a calculation, enter the first number of the  
calculation. Select a function such as add or subtract  
from the function map. Enter the second number of the  
calculation, and select =. The calculator performs  
operations in the order they are entered. The result of  
the calculation remains in the editor field and can be  
used as the first number of a new calculation.  
To search for files, select Options > Find. Enter the  
search text, and press the scroll key. The folders and  
files whose names contain the search text are  
displayed.  
To view information about the selected file, select  
Options > View details. To view additional  
information about the file online, select Options >  
Additional details.  
The device saves the result of the last calculation in its  
memory. Exiting the Calculator application or  
switching off the device does not clear the memory. To  
recall the last saved result the next time you open the  
Calculator application, select Options > Last result.  
Quickoffice  
To save the numbers or results of a calculation, select  
Select Menu > Office > Quickoffice.  
Options > Memory > Save.  
Quickoffice consists of Quickword for Microsoft Word,  
Quicksheet for Microsoft Excel, Quickpoint for Microsoft  
PowerPoint, and Quickmanager for purchasing  
software. You can view Microsoft Office 2000, XP, and  
2003 documents (*.doc, *.xls, and *.ppt) with  
Quickoffice. If you have the editor version of  
Quickoffice, you can also edit files.  
To retrieve the results ofa calculation fromthe memory  
and use them in a calculation, select Options >  
Memory > Recall.  
File manager  
With File manager, you can manage the contents and  
properties of files and folders on your device memory  
and memory card. You can open, create, move, copy,  
All file formats or features are not supported.  
100  
         
Work with files  
Set base currency and  
exchange rate  
To open a file, scroll to it, and press the scroll key.  
To sort files according to the type, select Options >  
When you change base currency, you must enter new  
exchange rates because all previously set exchange  
rates are cleared.  
Sort by.  
To view the details of a file, select Options >  
Details. The details include the name, size and location  
of the file, and the time and date when the file was last  
modified.  
Before you can make currency conversions, you must  
choose a base currency and add exchange rates. The  
rate of the base currency is always 1. The base currency  
determines the conversion rates of the other  
currencies.  
To send files to a compatible device, select Options >  
Send and the sending method.  
1. To set the rate of exchange for the unit of currency,  
scroll to the Type field, and select Options >  
Currency rates.  
Converter  
2. Scroll to the currency type and enter the exchange  
rate you would like to set per single unit of  
currency.  
Select Menu > Office > Converter.  
The converter has limited accuracy, and rounding  
errors may occur.  
3. To change the base currency, scroll to the currency,  
and select Options > Set as base currency.  
4. Select Done > Yes to save the changes.  
Convert measurements  
After you have inserted all the necessary exchange  
rates, you can make currency conversions.  
1. Scroll to the Type field, and select Options >  
Conversion type to open a list of measures. Select  
the measure to use, and select OK.  
2. Scroll to the first Unit field, and select Options >  
Select unit. Select the unit from which to convert,  
and select OK. Scroll to the next Unit field, and  
select the unit to which to convert.  
Zip manager  
Select Menu > Office > Zip.  
With Zip manager, you can create new archive files to  
store compressed ZIP formatted files; add single or  
multiple compressed files or directories to an archive;  
set, clear, or change the archive password for protected 101  
3. Scroll to the first Amount field, and enter the value  
to convert. The other Amount field changes  
automatically to show the converted value.  
               
archives; and change settings, such as compression  
level, and file name encoding.  
To print to a file, select Options > Printing  
options > Print > Print to file, and determine the  
location for the file.  
To change the printing options, select Options >  
Printing options. You can select the printer you want  
to use, the number of copies and the range of pages  
you want to print.  
You can store the archive files on the device memory  
or on a memory card.  
PDF reader  
To change the page layout before printing, select  
Options > Printing options > Page setup. You can  
change the paper size and orientation, define the  
margins, and insert a header or a footer. The maximum  
length of the header and footer is 128 characters.  
Select Menu > Office > Adobe PDF.  
With PDF reader you can read PDF documents on the  
display of your device; search for text in the  
documents; modify settings, such as zoom level and  
page views; and send PDF files using e-mail.  
To preview a file or message before you print, select  
Options > Printing options > Preview.  
Printing  
Printing options  
You can print documents, such as files, messages, or  
web pages, from the device, preview a print job, define Open a document, such as a file or message, and select  
page layout options, select a printer, or print to a file.  
Options > Printing options > Print.  
You may not be able to print all types of documents.  
Define the following options:  
Printer — Select an available printer from the list.  
Print — Select All pages, Even pages, or Odd  
pages as the print range.  
Print files  
To configure a printer for your device, select Menu >  
Office > Printers > Options > Add. To set the  
printer as the default printer, select Options >  
Printing options > Printers, scroll to the printer and  
select Options > Set as default.  
Print range — Select All pages in range, Current  
page, or Defined pages as the page range.  
Number of copies — Select the number of copies  
to print.  
Print to file — Select to print to a file and determine  
Before you print, make sure your device is properly  
the location for the file.  
connected to the printer.  
The available options may vary.  
To print a document, select Options > Printing  
102  
options > Print.  
           
To set an alarm, select Options > New alarm. When  
an alarm is active, is displayed.  
Printer settings  
Select Menu > Office > Printers.  
To add a new printer, select Options > Add.  
Define the following:  
To switch off the alarm, select Stop, or to stop the  
alarm for 5 minutes, select Snooze. If the alarm time  
is reached while the device is switched off, the device  
switches itself on and starts sounding the alarm tone.  
If you select Stop, the device asks whether you want  
to activate the device for calls. Select No to switch off  
the device or Yes to make and receive calls. Do not  
select Yes when wireless phone use may cause  
interference or danger.  
Printer — Enter a name for the printer.  
Driver — Select a driver for the printer.  
Bearer — Select a bearer for the printer.  
Access point — Select the access point.  
Port — Select the port.  
Host — Define the host.  
To change the alarm time, select Options > Reset  
User — Enter the user.  
alarm.  
Queue — Enter the print queue.  
Orientation — Select the orientation.  
Paper size — Select the paper size.  
Media type — Select the media type.  
Colour mode — Select the colour mode.  
Printer model — Select the printer model.  
To remove the alarm, select Options > Remove  
alarm.  
World clock  
The available options may vary.  
Open the world clock tab to check the time in different  
cities.  
To add a city to the world clock view, select Options >  
Clock  
Add city.  
Select Menu > Office > Clock.  
To change the city that determines the time and date  
in your device, select Options > Set as current city.  
The city is displayed in the Clock main view, and the  
time in your device is changed according to the city  
selected. Check that the time is correct and matches  
your time zone.  
In Clock, you can view your local time and time zone  
information, set and edit alarms, or modify date and  
time settings.  
Alarm clock  
Open the alarm clock tab.  
Clock settings  
103  
Select Options > Settings.  
                 
To change the time or date, select Time or Date.  
Nokia Wireless  
Keyboard  
To change the clock shown on the home screen, select  
Clock type > Analogue or Digital.  
To allow the mobile phone network to update the time,  
date, and time zone information to your device  
(network service), select Network operator time >  
Auto-update.  
Wireless keyboards are available as separate  
enhancements. To set up the Nokia Wireless Keyboard  
or other compatible wireless keyboard supporting the  
Bluetooth Human Interface Devices (HID) profile for use  
with your device, use the Wireless keyboard  
application.  
To change the alarm tone, select Clock alarm tone.  
1. Activate Bluetooth connectivity on your device:  
select Menu > Connectivity > Bluetooth >  
Bluetooth > On. Make sure that you have set My  
phone's visibility > Shown to all.  
Notes  
Select Menu > Office > Notes.  
You can create and send notes to other compatible  
devices, and save received plain text files (.txt format)  
to Notes.  
2. Switch on the keyboard.  
3. Select Menu > Office > Wlss. keybd..  
4. To start searching for devices with Bluetooth  
connectivity, select Options > Find keyboard.  
Write and send notes  
5. Select the keyboard from the list, and press the  
To write a note, start entering the text. The note editor  
opens automatically.  
scroll key to start the connection.  
6. To pair the keyboard with your device, enter a  
passcode of your choice (1 to 9 digits) on the device  
and the same passcode on your keyboard.  
To open a note, scroll to it, and press the scroll key.  
To send a note to other compatible devices, select  
Options > Send.  
7. If you are asked for a keyboard layout, select it from  
a list on your device.  
To synchronise or to define synchronisation settings  
for a note, select Options > Synchronisation. Select  
Start to initialise synchronisation or Settings to define  
the synchronisation settings for the note.  
When the name of the keyboard appears, its status  
changes to Keyboard connected, and the indicator of  
your keyboard blinks slowly; the keyboard is ready for  
use.  
For details on the operation and maintenance of your  
104  
keyboard, see its user guide.  
         
Connectivity  
Your device offers several options to connect to the  
internet, a corporate intranet, or to another device or  
computer.  
Nokia PC Suite  
You can install Nokia PC Suite from the CD-ROM or from  
the web. Nokia PC Suite can be used with Windows XP  
and Windows Vista. With Nokia PC Suite, you can make  
backups, synchronise your device with a compatible  
computer, move files between your device and a  
compatible computer, or use your device as a modem.  
Fast downloading  
High-speed downlink packet access (HSDPA, also called  
3.5G, indicated by  
) is a network service in UMTS  
For more information about Nokia PC Suite, see the  
networks and provides high-speed data downloads.  
When HSDPA support in the device is activated and the  
device is connected to a UMTS network that supports  
HSDPA, downloading data such as messages, e-mail,  
and browser pages through the cellular network may  
be faster. An active HSDPA connection is indicated by  
. The icon may vary between regions.  
Nokia PC Suite guide.  
Data cable  
To avoid damaging the memory card, do not remove  
the data cable in the middle of a data transfer.  
To activate or deactivate HSDPA, select Menu >  
Tools > Settings > Connection > Packet data >  
High speed packet access. Some cellular networks do  
not allow incoming voice calls when HSDPA is active, in  
which case you need to deactivate HSDPA to receive  
calls. Contact your network operator for details.  
Transfer data between your device and a PC  
1. Insert a memory card to your device and connect  
the device to a compatible PC with the USB data  
cable.  
2. When the device asks which mode is used, select  
Mass storage. In this mode, you can see your  
device as a removable hard drive in your computer.  
For availability and subscription to data connection  
services, contact your service provider.  
HSDPA only affects the download speed; sending data  
to the network, such as messages and e-mail, is not  
affected.  
3. End the connection from the computer (for  
example, from an Unplug or Eject Hardware wizard  
in Windows) to avoid damaging the memory card.  
105  
             
To use Nokia PC Suite with your device, install Nokia PC 2. Select Menu > Connectivity > Infrared to switch  
Suite on your PC, connect the data cable, and select PC  
on infrared on your device.  
Suite.  
3. Switch on infrared on the other device and wait a  
few seconds until the infrared connection is  
established.  
To use your device to connect your PC to the web,  
connect the data cable, and select Connect PC to  
web.  
To synchronise the music in your device with Nokia  
Music Player, install the Nokia Music Player software on  
your PC, connect the data cable, and select Media  
transfer.  
To change the USB mode you normally use with the  
data cable, select Menu > Connectivity > USB >  
USB connection mode and the desired option.  
To set the device to ask for the mode each time you  
connect the USB data cable to the device, select  
Menu > Connectivity > USB > Ask on  
connection > Yes.  
4. Locate the desired file in an application or File  
manager, and select Options > Send > Via  
infrared.  
If the data transfer is not started within 1 minute after  
the activation of the infrared port, the connection is  
cancelled and must be started again.  
All items received through infrared are placed in the  
Inbox folder in Messaging.  
Positioning the devices away from each other breaks  
the connection, but the infrared light beam remains  
active on your device until it deactivates.  
Bluetooth  
Infrared  
Select Menu > Connectivity > Bluetooth.  
Do not point the infrared (IR) beam at anyone's eye or  
allow it to interfere with other IR devices. This device  
is a Class 1 laser product.  
About Bluetooth  
Use infrared to connect two devices and transfer data  
Bluetooth technology enables wireless connections  
between electronic devices within a range of 10 metres  
between them. With infrared, you can transfer data  
such as business cards, calendar notes, and media files (33 feet). A Bluetooth connection can be used to send  
with a compatible device.  
images, videos, text, business cards, calendar notes, or  
to connect wirelessly to devices that use Bluetooth  
technology.  
1. Ensure that the infrared ports of the devices face  
each other. The positioning of the devices is more  
important than the angle or distance.  
Since devices using Bluetooth technology  
106  
communicate using radio waves, your device and the  
       
other devices do not need to be in direct line-of-sight.  
The two devices only need to be within a maximum of  
10 metres of each other, although the connection can  
be subject to interference from obstructions such as  
walls or other electronic devices.  
Tip: If you have sent data using Bluetooth  
before, a list of the previous search results is  
displayed. To search for more Bluetooth  
devices, select More devices.  
6. Select the device with which you want to connect.  
If the other device requires pairing before data can  
be transmitted, you are asked to enter a passcode.  
Several Bluetooth connections can be active at a time.  
For example, if your device is connected to a headset,  
you can also transfer files to another compatible device  
at the same time.  
When the connection has been established, Sending  
data is shown.  
Features using Bluetooth technology increase the  
The Sent folder in the Messaging application does not  
demand on battery power and reduce the battery life.  
store messages sent using Bluetooth connectivity.  
To receive data using Bluetooth, select Bluetooth >  
On and My phone's visibility > Shown to all to  
receive data from a non-paired device or Hidden to  
receive data from a paired device only. When you  
receive data through Bluetooth, depending on the  
settings of an active profile, a tone sounds, and you are  
asked if you want to accept the message in which the  
data is included. If you accept, the message is placed  
in the Inbox folder in the Messaging application.  
Send and receive data with  
Bluetooth  
1. When you activate Bluetooth for the first time, you  
are asked to give a name to your device. Give your  
device a unique name to make it easy to recognise  
if there are several Bluetooth devices nearby.  
2. Select Bluetooth > On.  
Tip: You can access the files in the device or on  
the memory card using a compatible accessory  
that supports the File Transfer Profile Client  
service (for example, a laptop computer).  
3. Select My phone's visibility > Shown to all or  
Define period. If you select Define period, you  
need to define the time during which your device  
is visible to others. Your device and the name you  
entered can now be seen by other users with  
devices using Bluetooth technology.  
A Bluetooth connection is disconnected automatically  
after sending or receiving data. Only Nokia PC Suite and  
some enhancements such as headsets may maintain a  
connection even if not actively used.  
4. Open the application where the item you want to  
send is stored.  
5. Select the item and Options > Send > Via  
Bluetooth. The device searches for other devices  
using Bluetooth technology within range and lists  
them.  
Pair devices  
107  
Open the paired devices tab.  
       
Before pairing, decide on your own passcode (1-16  
digits), and agree with the user of the other device to  
use the same code. Devices that do not have a user  
interface have a fixed passcode. You need the passcode  
only when you connect the devices for the first time.  
After pairing, it is possible to authorise the connection.  
Pairing and authorising the connection makes  
connecting quicker and easier, as you do not have to  
accept the connection between paired devices every  
time you establish a connection.  
with that device, pairing is removed immediately, and  
the connection is ended.  
To allow a paired device to connect automatically to  
your device, select Set as authorised. Connections  
between your device and the other device can be made  
without your knowledge. No separate acceptance or  
authorisation is needed. Use this status for your own  
devices, such as your compatible headset or computer,  
or devices that belong to someone you trust. If you  
want to accept connection requests from the other  
device separately every time, select Set as  
The passcode for remote SIM access must have 16  
digits.  
unauthorised.  
1. Select Options > New paired device. The device  
starts to search for Bluetooth devices within range.  
If you have sent data using Bluetooth before, a list  
of the previous searchresults isdisplayed. To search  
for more Bluetooth devices, select More devices.  
To use a Bluetooth audio enhancement such as a  
Bluetooth handsfree or headset, you need to pair your  
device with the enhancement. See the enhancement  
user guide for the passcode and further instructions.  
To connect to the audio enhancement, switch on the  
enhancement. Some audio enhancements connect  
automatically to your device. Otherwise open the  
paired devices tab, scroll to the enhancement, and  
select Options > Connect to audio device.  
2. Select the device with which you want to pair, and  
enter the passcode. The same passcode must be  
entered to the other device as well.  
3. Select Yes to make the connection between your  
device and the other device automatic, or No to  
confirm the connection manually every time a  
connection attempt is made. After pairing, the  
device is saved to the paired devices page.  
Security tips  
When you are not using Bluetooth connectivity, select  
Bluetooth > Off or My phone's visibility >  
Hidden.  
To give a nickname to the paired device, select  
Options > Assign short name. The nickname is only  
displayed in your device.  
Do not pair with an unknown device.  
To delete a pairing, select the device whose pairing you  
want to delete and Options > Delete. To delete all  
pairings, select Options > Delete all. If you are  
currently connected to a device and cancel the pairing  
108  
   
5. To pair the devices, enter the Bluetooth passcode  
shown on the display of the car kit to your device.  
SIM access profile  
Tip: If you have already accessed the SIM card  
from the car kit with the active user profile, the  
car kit searches automatically for a device with  
the SIM card. If it finds your device, and  
With the SIM access profile, you can access the SIM card  
of your device from a compatible car kit device. This  
way, you do not need a separate SIM card to access SIM  
card data and connect to the GSM network.  
automatic authorisation is activated, the car kit  
automatically connects to the GSM network  
when you switch on the car ignition.  
To use the SIM access profile, you need the following:  
Compatible car kit device that supports Bluetooth  
wireless technology  
When you activate the remote SIM access profile, you  
can use applications on your device that do not need  
network or SIM services.  
Valid SIM card in your device  
When the wireless device is in the remote SIM mode,  
you can only use a compatible connected  
To make connections between your device and the car  
kit without separate acceptance or authorisation,  
select Menu > Connectivity > Bluetooth, and open  
the paired devices tab. Scroll to the car kit, press the  
scroll key, and enter the Bluetooth passcode. When the  
device asks to make the connection automatic, select  
Yes. If you select No, connection requests from this car  
kit must be accepted separately every time.  
To end the remote SIM access connection from your  
device, select Menu > Connectivity > Bluetooth >  
Remote SIM mode > Off.  
enhancement, such as a car kit, to make or receive calls.  
Your wireless device will not make any calls, except to  
the emergency numbersprogrammed into your device,  
while in this mode. To make calls from your device, you  
must first leave the remote SIM mode. If the device has  
been locked, enter the lock code to unlock it first.  
For more information about car kit devices and  
compatibility with your device, see the Nokia web site  
and your car kit user guide.  
Use the SIM access profile  
1. Select Menu > Connectivity > Bluetooth >  
Remote SIM mode > On.  
Wireless LAN  
2. Activate Bluetooth in the car kit.  
Some places, like France, have restrictions on the use  
of wireless LAN. Check with your local authorities for  
more information.  
3. Use your car kit to start a search for compatible  
devices. For instructions, see the user guide of your  
car kit.  
Your device can detect and connect to a wireless local  
4. Select your device from the list of compatible  
area network (WLAN). To use WLAN, a network must be  
devices.  
109  
     
available in the location and your device must be  
connected to it.  
Tip: To check the unique media access control  
(MAC) address that identifies your device, for  
example to configure the MAC address of your  
device to a WLAN router, enter *#62209526# on  
the device keypad. The MAC address is shown on  
the device display.  
WLAN connections  
Important: Always enable one of the available  
encryption methods to increase the security of your  
wireless LAN connection. Using encryption reduces the  
risk of unauthorised access to your data.  
See WLAN availability  
To have your device show WLAN availability, select  
Menu > Tools > Settings > Connection >  
Wireless LAN > Show WLAN availability.  
To use WLAN, you must create an internet access point  
in a WLAN. Use the access point for applications that  
need to connect to the internet. A WLAN connection is  
established when you create a data connection using  
a WLAN access point. The active WLAN connection is  
ended when you end the data connection. You can also  
end the connection manually. See "Connection  
manager", p. 112.  
If WLAN is available,  
is shown on the display.  
Tip: You can also scan for networks in range.  
WLAN wizard  
You can use WLAN during a voice call or when packet  
data is active. You can only be connected to one WLAN  
access point device at a time, but several applications  
can use the same internet access point.  
Select Menu > Connectivity > WLAN wiz..  
The WLAN wizard helps you find and connect to a  
wireless LAN. When you open the application, your  
device starts to scan for available WLANs and lists them.  
When the device is in the Offline profile, you can still  
use WLAN, if available. Remember to comply with any  
applicable safety requirements when establishing and  
using a WLAN connection.  
To update the list of available WLANs, select Options >  
Refresh.  
To mark up WLANs in the list of found networks, select  
Filter WLAN networks. The selected networks are  
filtered out the next time the application searches for  
wireless LANs.  
If you move the device to another location within the  
WLAN and out of range of a WLAN access point, the  
roaming functionality can automatically connect your  
device to another access point thatbelongsto the same  
WLAN. As long as you remain within range of access  
points that belong to the same network, your device  
can stay connected to the network.  
To start or continue browsing the web using the access  
point of the WLAN, scroll to the desired network, and  
110  
           
select Options > Start web browsing or Cont.web  
To start a search for  
browsing.  
available WLANs, scroll to  
the row showing the status,  
press the scroll key, and  
select Search for WLAN. To  
set WLAN scanning off, scroll  
to the row showing the  
status, press the scroll key,  
and select Switch WLAN  
scan off.  
To disconnect the active connection to the WLAN, select  
Options > Disconnect WLAN.  
To view the details of the WLAN, select Options >  
Details.  
To save the access point of the WLAN, select Options >  
Define access point.  
Always enable one of the available encryption methods  
to increase the security of your WLANconnection. Using  
encryption reduces the risk of unauthorised access to  
your data.  
When Start web browsing  
or Use for is selected, the  
WLAN wizard automatically  
creates an access point for  
Use the wizard on the home screen  
the selected WLAN. The access point can also be used  
with other applications requiring WLAN connection.  
On the home screen, the WLAN wizard shows the status  
of your WLAN connections and network searches. To  
view the available options, scroll to the row showing  
the status, and press the scroll key. Depending on the  
status, you can start the web browser using a WLAN  
connection, connect to your net call service, disconnect  
from a WLAN, search for WLANs, or set the network  
scanning on or off.  
If you select a secured WLAN, you are asked to enter  
the relevant passcodes. To connect to a hidden  
network, you must enter the correct service set  
identifier (SSID).  
To use the found WLAN for a net call connection, scroll  
to the row showing the status, and press the scroll key.  
Select Use for, the desired net call service, and the  
WLAN to be used.  
If WLAN scanning is off and you are not connected to  
any WLAN, WLAN scanning off is displayed on the  
home screen. To set scanning on and search for  
available WLANs, scroll to the row showing the status,  
and press the scroll key.  
Modem  
Select Menu > Connectivity > Modem.  
Together with a compatible computer, you can use  
your device as a modem to connect to the web, for  
example.  
111  
Before you can use your device as a modem  
   
You need an appropriate data communications  
software on your computer, such as Nokia PC Suite.  
For more information, see the Nokia PC Suite guide.  
View and end active  
connections  
You must subscribe to the appropriate network  
services from your service provider or internet  
service provider.  
To see the open data connections, select Active data  
connections.  
To view detailed information about network  
connections, select a connection from the list and  
Options > Details. The type of information shown  
depends on the connection type.  
You must have the appropriate drivers installed on  
your computer. You must install drivers for the cable  
connection, and you may need to install or update  
Bluetooth or infrared drivers.  
To end the selected network connection, select  
To connect the device to a compatible computer using  
infrared, press the scroll key. Make sure the infrared  
ports of the device and computer are directly facing  
each other with no obstacles between them.  
Options > Disconnect.  
To end all active network connections simultaneously,  
select Options > Disconnect all.  
To connect your device to a computer using Bluetooth  
wireless technology, initiate the connection from the  
computer. To activate Bluetooth in your device, select  
Menu > Connectivity > Bluetooth and select  
Bluetooth > On.  
Search for WLAN  
To search for WLANs available within range, select  
Available WLAN networks. The available WLANs are  
listed with their network mode (infrastructure or ad-  
hoc), signal strength, and network encryption  
indicators, and whether your device has an active  
connection with the network.  
If you use a cable to connect your device to a computer,  
initiate the connection from the computer.  
You may not be able to use some of the other  
communication features when the device is used as a  
modem.  
To view the details of a network, scroll to it, and press  
the scroll key.  
To create an internet access point for a network, select  
Options > Define access point.  
Connection manager  
Select Menu > Connectivity > Conn. mgr..  
112  
         
Security and data management  
Manage the data and software on your device, and take selection key, enter your lock code, and press the scroll  
care of the security of the device and its contents.  
key.  
To change the lock code, select Menu > Tools >  
Settings > General > Security > Phone and SIM  
card > Lock code. Enter the old code and then the  
new code twice. The new code can be 4-255 characters  
long. Both alphabets and digits can be used, and both  
uppercase and lowercase alphabets are possible.  
Important: Your device can only support one  
antivirus application. Having more than one  
application with antivirus functionality could affect  
performance and operation or cause the device to stop  
functioning.  
You can also lock the device remotely by sending a text  
message to the device. To enable remote locking and  
to define the text for the message, select Menu >  
Tools > Settings > General > Security > Phone  
and SIM card > Allow remote lock > Yes. Enter the  
remote lock message and confirm the message. The  
message must be at least 5 characters long.  
Lock the device  
Important: If the device has been locked, enter  
the lock code to activate the phone function. When the  
device is locked, calls may be possible to the official  
emergency number. Making an emergency call in the  
offline profile or when the device is locked requires  
that the device recognise the number to be an official  
emergency number. It is advisable to change the  
profile or unlock the device by entering the lock code  
before you make the emergency call.  
Memory card security  
Select Menu > Tools > Memory.  
You can protect a memory card with a password to  
prevent unauthorised access. To set a password, select  
Options > Set password. The password can be up to  
8 characters long and is case-sensitive. The password  
is stored in your device. You do not need to enter it  
again while you use the memory card on the same  
device. If you use the memory card on another device,  
To prevent access to the contents of your device, lock  
the device when in home screen. Press the power key,  
select Lock phone, and enter your lock code. The  
default lock code is 12345. To unlock, press the left  
113  
         
you are asked for the password. Not all memory cards  
support password protection.  
card in other devices, and if you restore factory  
settings, you cannot decrypt the memory card.  
Encrypt and save key — Encrypt the memory card  
and save the key manually in the default folder. For  
security, store the key to a safe place outside the  
device. For example, you can send the key to your  
computer. Enter a pass phrase for the key and a  
name for the key file. The pass phrase should be long  
and complex.  
To remove the memory card password, select  
Options > Remove password. When you remove the  
password, the data on the memory card is not  
protected against unauthorised use.  
To open a locked memory card, select Options >  
Unlock memory card. Enter the password.  
Encrypt with restored key — Encrypt the memory  
card with a key you have received. Select the key file,  
and enter the pass phrase.  
If you cannot recall the password to unlock a locked  
memory card, you may reformat the card, in which case  
the card is unlocked and password removed.  
Formatting a memory card destroys all data stored on  
the card.  
Decrypt device memory or  
memory card  
Encryption  
Always remember to decrypt the device memory and/  
or the memory card before updating the device  
software.  
Select Menu > Tools > Encryption.  
Encrypt your device or memory card to prevent  
outsiders from accessing your important information.  
To decrypt the device memory, select Phone  
memory.  
To decrypt the memory card without destroying the  
Encrypt device memory or  
memory card  
encryption key, select Memory card > Decrypt.  
To decrypt the memory card and destroy the  
encryption key, select Memory card > Decrypt and  
turn off encryption.  
To encrypt the device memory, select Phone  
memory.  
To encrypt the memory card, select Memory card and  
from the following:  
Fixed dialling  
Encrypt without saving key — Encrypt the  
memory card without saving the encryption key. If  
you select this option, you cannot use the memory  
Select Menu > Communic. > Contacts > Options >  
114  
SIM contacts > Fixed dial contacts.  
             
With the fixed dialling service, you can restrict calls  
different types of certificates: authority certificates,  
from your device to certain phone numbers. Not all SIM personal certificates, trusted site certificates, and  
cards support the fixed dialling service. Contact your  
device certificates. During a secure connection, a server  
may send a server certificate to your device. Upon  
receipt, it is checked through an authority certificate  
stored in your device. You receive notification if the  
identity of the server is not authentic or if you do not  
have the correct certificate in your device.  
service provider for more information.  
When fixed dialling is activated, calls may be possible  
to the official emergency number programmed into  
your device.  
1. To restrict calls from your device, select Options >  
New SIM contact and enter the contact name and  
phone number to the list of numbers to which calls  
are allowed, or select Add from Contacts to copy  
the contact from Contacts. To restrict calls by a  
country prefix, enter the country prefix in the list of  
numbers. All phone numbers to which calls are  
allowed must start with this country prefix.  
You can download a certificate from a web site, or  
receive a certificate as a message. Certificates should  
be used when you connect to an online bank or a  
remote server to transfer confidential information.  
They should also be used if you want to reduce the risk  
of viruses or other malicious software, and to check the  
authenticity of software when you download and  
install software to your device.  
2. Select Options > Activate fixed dialling. You  
need your PIN2 code to activate and deactivate  
fixed dialling or edit your fixed dialling contacts.  
Contact your service provider if you do not have the  
code. To cancel the service, select Options >  
Deactivate fixed dialling.  
Tip: When you add a new certificate, check its  
authenticity.  
View certificate details  
Tip: To send text messages to the SIM contacts  
while the fixed dialling service is active, you  
need to add the text message centre number to  
the fixed dialling list.  
You can only be sure of the correct identity of a server  
when the signature and the validity period of a server  
certificate have been checked.  
To view certificate details, open a certificate folder, and  
select a certificate and Options > Certificate  
details.  
Certificate manager  
One of the following notes may appear:  
Select Menu > Tools > Settings > General >  
Certificate not trusted — You have not set any  
application to use the certificate. You may want to  
change the trust settings.  
Security > Certificate management.  
Digital certificates are used to verify the origins of  
115  
software but do not guarantee safety. There are four  
     
Expired certificate — The period of validity has  
ended for the selected certificate.  
and press the scroll key to select Yes or No. You cannot  
change the trust settings of a personal certificate.  
Certificate not valid yet — The period of validity  
has not yet begun for the selected certificate.  
Certificate corrupted — The certificate cannot be  
used. Contact the certificate issuer.  
Depending on the certificate, a list of applications that  
can use the certificate is displayed:  
Symbian installation — New Symbian operating  
system application.  
Internet — E-mail and graphics.  
App. installation — New Java™ application.  
Online certif. check — Online certificate status  
protocol.  
Certificate trust settings  
Trusting a certificate means that you authorise it to  
verify web pages, e-mail servers, software packages,  
and other data. Only trusted certificates can be used to  
verify services and software.  
Security modules  
Select Menu > Tools > Settings > General >  
Important: Even if the use of certificates makes  
the risks involved in remote connections and software  
installation considerably smaller, they must be used  
correctly in order to benefit from increased security.  
The existence of a certificate does not offer any  
protection by itself; the certificate manager must  
contain correct, authentic, or trusted certificates for  
increased security to be available. Certificates have a  
restricted lifetime. If "Expired certificate" or "Certificate  
not valid yet" is shown, even if the certificate should  
be valid, check that the current date and time in your  
device are correct.  
Security > Security module.  
View and edit security  
modules  
To view or edit a security module, scroll to it, and press  
the scroll key.  
To view detailed information about a security module,  
select Options > Security details.  
To edit the PIN codes for the security module, select  
Module PIN to edit the PIN code for the security  
module or Signing PIN to edit the PIN code for digital  
signatures. You may not be able to change these codes  
for all security modules.  
Before changing any certificate settings, you must  
make sure that you really trust the owner of the  
certificate and that the certificate really belongs to the  
listed owner.  
To change the trust settings, select a certificate and  
The key store contains the contents of the security  
module. To delete the key store, select Key store,  
select the desired key store, and Options > Delete.  
Options > Trust settings. Select an application field  
116  
         
You may not be able to delete the key store of all  
security modules.  
The remote configuration connection is usually started  
by the server when the device settings need to be  
updated.  
To create a new server profile, select Options > New  
Back up data  
server profile.  
You may receive these settings from your service  
provider in a configuration message. If not, define the  
following:  
It is recommended to back up device memory regularly  
to the memory card or a compatible computer.  
To back up information from the device memory to a  
memory card, select Menu > Tools > Memory >  
Options > Back up phone memory.  
Server name — Enter a name for the configuration  
server.  
Server ID — Enter the unique ID to identify the  
configuration server.  
To restore information from the memory card to the  
device memory, select Menu > Tools > Memory >  
Options > Restore from card.  
Server password — Enter a password to identify  
your device to the server.  
Session mode — Select the preferred connection  
type.  
You can also connect your device to a compatible  
computer and use Nokia PC Suite to back up data.  
Access point — Select the access point to use for  
the connection, or create a new access point. You  
can also choose to be asked for the access point  
every time you start a connection. This setting is  
available only if you have selected Internet as the  
bearer type.  
Remote configuration  
Select Menu > Tools > Device mgr..  
With Device manager, you can manage settings, data,  
Host address — Enter the web address of the  
configuration server.  
and software on your device remotely.  
You can connect to a server, and receive configuration  
settings for your device. You may receive server profiles  
and different configuration settings from your service  
providers or company information management  
department. Configuration settings may include  
connection and other settings used by different  
applications in your device. The available options may  
vary.  
Port — Enter the port number of the server.  
User name — Enter your user ID for the  
configuration server.  
Password — Enter your password for the  
configuration server.  
Allow configuration — Select Yes to allow the  
server to initiate a configuration session.  
117  
       
Auto-accept all requests — Select Yes if you do  
not want the server to ask for your confirmation  
when it initiates a configuration session.  
Network authentication — Select whether to use  
http authentication.  
Java ME™ applications compatible with the Symbian  
operating system. The Java application installation  
file extensions are .jad or .jar.  
Installation files may be transferred to your device  
from a compatible computer, downloaded during  
browsing, or sent to you in a multimedia message, as  
an e-mail attachment, or with Bluetooth.  
Network user name — Enter your user ID for the  
http authentication. This setting is available only if  
you have selected Network authentication to be  
used.  
During the installation, the device checks the integrity  
of the package to be installed. The device shows  
information about the checks being carried out, and  
you are given options to continue or cancel the  
installation.  
Network password — Enter your password for the  
http authentication. This setting is available only if  
you have selected Network authentication to be  
used.  
If you install applications that require a network  
connection, note that the power consumption of your  
device may increase when you use these applications.  
To connect to the server and receive configuration  
settings for your device, select Options > Start  
configuration.  
Tip: When browsing web pages, you can  
download an installation file and install it  
immediately. Note, however, that the  
connection runs in the background during the  
installation.  
To view the configuration log of the selected profile,  
select Options > View log.  
Application manager  
Install applications  
Important: Only install and use applications and  
other software from trusted sources, such as  
applications that are Symbian Signed or have passed  
the Java Verified™ testing.  
To download and install software from the web, select  
Download apps.. Select the application and  
Options > Install.  
Select Menu > Installations > App. mgr..  
You can install two types of applications and software  
on your device:  
Applications and software specifically intended for  
your device or compatible with the Symbian  
operating system. These software installation files  
have the extension .sis or .sisx.  
118  
     
To view the details of an installed software package,  
Default web address — The validity of a certificate  
is checked from the default address if the certificate  
does not include its own web address. To change  
the default address, select Default web address,  
and enter the new address.  
select the application and Options > View details.  
To view the installation log, select Options > View  
log. A list shows what software has been installed and  
removed, and the date of the installation or removal.  
If you encounter problems with the device after  
installing a software package, use this list to find out  
which software package may be the cause of the  
problem. The information in this list may also help you  
pinpoint problems that are caused by software  
packages that are incompatible with each other.  
To remove software, select Options > Remove. If you  
remove software, you can only reinstall it by using the  
original software package file, or by restoring a full  
backup that contains the removed software package.  
If you remove a software package, you may no longer  
be able to open files created with that software. If  
another software package depends on the software  
package that you removed, the other software package  
may stop working. Refer to the documentation of the  
installed software package for details.  
Java security settings  
To specify security settings for a Java application, select  
Options > Settings.  
You can define which functions the Java application can  
access. The value that you can set for each functionality  
depends on the protection domain of the software  
package.  
Access point — Select an access point that the  
application may use when making network  
connections.  
Network access — Allow the application to create  
a data connection to the network.  
Messaging — Allow the application to send  
messages.  
Application auto-start — Allow the application to  
start automatically.  
Installation settings  
Connectivity — Allow the application to activate a  
data connection, such as a Bluetooth connection.  
Multimedia — Allow the application to use the  
multimedia features of your device.  
Read user data — Allow the application to read  
your calendar entries, contacts, or any other  
personal data.  
To modify the installation settings, select Options >  
Settings and from the following:  
Software installation — Select to install signed  
applications only or all applications.  
Online certificate check — To check the validity of  
certificates when an application is installed, select  
On. If validity cannot be verified, you are asked if  
you want to continue installation.  
Edit user data — Allow the application to add  
personal data, such as entries to Contacts.  
Positioning — Allow the application to use the  
location data in your device.  
119  
       
Landmarks — Allow the application to use the  
Use activation keys  
landmarks in your device.  
Digital rights management (DRM) protected content  
comes with an associated activation key that defines  
your rights to use the content.  
You can define how you are prompted to confirm the  
Java application's access to the device functions. Select  
one of the following values:  
If your device has OMA DRM-protected content, to back  
up both the activation keys and the content, use the  
backup feature of Nokia PC Suite. Other transfer  
methods may not transfer the activation keys which  
need to be restored with the content for you to be able  
to continue the use of OMA DRM-protected content  
after the device memory is formatted. You may also  
need to restore the activation keys in case the files on  
your device get corrupted.  
Ask every time — Require the Java application to  
ask for your confirmation each time it uses the  
functionality.  
Ask first time — Require the Java application to ask  
for initial confirmation to use the functionality.  
Always allowed — Allow the Java application to  
use the functionality without your confirmation.  
The security settings help protect your device  
against harmful Java applications that may use the  
functions of your device without your permission.  
Only select Always allowed if you know the  
supplier and trustworthiness of the application.  
Not allowed — Prevent the Java application from  
using the functionality.  
If your device has WMDRM-protected content, both the  
activation keys and the content will be lost if the device  
memory is formatted. You may also lose the activation  
keys and the content if the files on your device get  
corrupted. Losing the activation keys or the content  
may limit your ability to use the same content on your  
device again. For more information, contact your  
service provider.  
Activation keys  
Some activation keys may be connected to a specific  
SIM card, and the protected content can be accessed  
only if the SIM card is inserted in the device.  
Select Menu > Tools > Actv. keys.  
Some media files, such as images, music, or video clips,  
are protected by digital usage rights. The activation  
keys for such files may allow or restrict their usage. For  
example, with some activation keys you may listen to  
a music track only a limited number of times. During  
one playback session you may rewind, fast-forward, or  
pause the track, but once you stop it, you have used  
one of the instances allowed.  
To view your activation keys by type, select Valid  
keys, Invalid keys, or Not in use.  
To view the key details, select Options > Key  
details.  
The following details are displayed for each media file:  
120  
     
Status — The status is Activation key is valid,  
Activation key expired, or Activation key not yet  
valid.  
With Sync, you can synchronise your contacts, calendar  
entries, or notes with corresponding applications on a  
compatible computer or remote internet server. Your  
synchronisation settings are saved in a  
Content sending Allowed means that you can  
send the file to another device. Not allowed means  
that you cannot send the file to another device.  
Content in phone Yes means that the file is in  
the device and the path of the file is displayed. No  
means that the related file is not currently in the  
device.  
synchronisation profile. The Sync application uses  
SyncML technology for remote synchronisation. For  
information on SyncML compatibility, contact the  
supplier of the applications with which you want to  
synchronise your device.  
You may receive the synchronisation settings as a  
message from your service provider. The available  
applications you can synchronise may vary. Contact  
your service provider for more information.  
To activate a key, go to the Activation keys main view,  
and select Invalid keys > Options > Get activation  
key. Establish a network connectionatthe prompt, and  
you are directed to a web site where you can purchase  
rights to the media.  
To remove file rights, open the valid keys tab or the  
keys not in use tab, scroll to the desired file, and select  
Options > Delete. If there are several rights related  
to the same media file, all the rights are deleted.  
Create a synchronisation  
profile  
There is a Nokia PC Suite synchronisation profile  
available in your device. You do not need to edit it if  
you synchronise your device with a computer using  
Nokia PC Suite.  
The group key view displays all of the files related to a  
group right. If you have downloaded multiple media  
files with the same rights, they are all displayed in this  
view. You can open the group view fromeitherthevalid  
keys or invalid keys tabs. To access these files, open the  
group rights folder.  
To create a new profile, select Options > New sync  
profile and assign a name for the profile, select the  
applications to synchronise with the profile, and  
specify the needed connection settings. Contact your  
service provider for details.  
Data synchronisation  
Select Menu > Tools > Sync.  
121  
     
Port — Enter the port number of the remote  
database server.  
Select applications to  
synchronise  
User name — Enter your user name to identify your  
device to the server.  
1. To select the applications to synchronise with a  
synchronisation profile, select Options > Edit  
sync profile > Applications.  
Password — Enter your password to identify your  
device to the server.  
Allow sync requests — To allow synchronisation  
to start from the remote database server, select  
Yes.  
2. Select the desired application, and select Include  
in sync > Yes.  
Accept all sync requests — To have your device  
ask for your confirmation before accepting  
synchronisation from the server, select No.  
Network authentication — To authenticate your  
device to the network before synchronisation, select  
Yes. Enter your network user name and network  
password.  
3. Specify the Remote database and  
Synchronisation type settings.  
Synchronisation connection  
settings  
To define the connection settings of a new profile,  
select Options > New sync profile > Connection  
settings and define the following settings:  
Mobile VPN  
Server version — Select the SyncMLversionyou can  
Select Menu > Tools > Settings > Connection >  
use with the remote server.  
VPN.  
Server ID — Enter the server ID of the remote  
server. This setting is only available if you select 1.2  
as the SyncML version.  
The Nokia mobile virtual private network (VPN) client  
creates a secure connection to compatible corporate  
intranet and services, such as e-mail. Your device  
connects from a mobile network, through the internet,  
to a corporate VPN gateway that acts as a front door to  
the compatible corporate network. VPN client uses IP  
Security (IPSec) technology. IPSec is a framework of  
open standards for supporting secure exchange of data  
over IP networks.  
Data bearer — Select the data bearer to connect to  
the remote server during synchronisation.  
Access point — Select the access point to use for  
the synchronisation connection, or create a new  
access point. You can also choose to be asked for the  
access point every time you start synchronising.  
Host address — Enter theweb address of the server  
that contains the database with which you want to  
synchronise your device.  
VPN policies define the method used by the VPN client  
and a VPN gateway to authenticate each other, and the  
encryption algorithms that they use to help protect the  
122  
         
confidentiality of data. Contact your company's IT  
department for a VPN policy.  
Contact your company's IT department for the correct  
settings.  
To install and configure the VPN client, certificates, and Open a destination, select a VPN access point, select  
policies, contact the IT administrator of your  
organisation.  
Edit, and define the following:  
Connection name — Enter a name for the VPN  
access point.  
VPN policy — Select the VPN policy to combine with  
the internet access point.  
Manage VPN  
Internet access point — Select the internet access  
point with which to combine the VPN policy to  
create secure connections for data transfer.  
Proxy server address — Enter the proxy server  
address of the private network.  
Select VPN management, and from the following:  
VPN policies — Install, view, and update VPN  
policies.  
VPN policy servers — Edit the connection settings  
of VPN policy servers from which you can install and  
update VPN policies. A policy server refers to a Nokia  
Security Service Manager (NSSM), which is not  
necessarily required.  
Proxy port number — Enter the proxy port  
number.  
VPN log — View the log for your VPN policy  
installations, updates and synchronisations, and  
other VPN connections.  
Use a VPN connection in an  
application  
You may have to prove your identity when you log on  
to the enterprise network. Contact your company's IT  
department for the credentials.  
Create VPN access points  
Select Settings > Connection > VPN.  
To use a VPN connection in an application, the  
An access point is where your phone connects to the  
network. To use e-mail and multimedia services or to  
browse web pages you must first define internet access  
points for these services. VPN access points pair VPN  
policies with regular internet access points to create  
secure connections.  
application mustbe associated with a VPN access point.  
Tip: You can configure the application's  
connection setting to Always ask, in which case  
you select the VPN access point from a list of  
connections when a connection is established.  
1. In the application in which you want to create a VPN  
connection, select a VPN access point as the access  
point.  
Your service provider may preset some or all access  
points for your device, and you may not be able to  
create, edit, or remove them.  
123  
         
2. If you are using legacy authentication, enter your  
VPN user name and passcode or password. If the  
SecurID token has become out of synchronisation  
with the clock of the ACE/Server, enter the next  
passcode. If you are using certificate-based  
authentication, you may have to enter the key store  
password.  
scanned includes a URL link, you can open it by  
selecting Options > Open link.  
To view previously saved, decoded information, select  
Saved data in the main view.  
Barcode reader  
Select Menu > Tools > Barcode.  
Use the Barcode reader application to decode  
barcodes. The codes may contain information such as  
URL links, e-mail addresses, phone numbers, and  
business cards. The Barcode reader does not support  
1D codes. The Barcode reader uses the camera in your  
device to scan codes.  
To scan a code, select Scan code. After a valid code is  
detected in the viewfinder, the decoded information  
appears on the display. To scan a code that is located  
at some distance from your device, deactivate the  
close-up mode by selecting Options > Deactiv. close-  
up mode.  
To save the scanned data, select Options > Save. The  
data is saved in the BCR file format.  
To save scanned data to Contacts, select Options >  
Add to Contacts or Save business card, depending on  
the data you are saving. If the data you scanned  
includes a mobile phone number or an e-mail address,  
you can call or send a message to the number or send  
an e-mail to the address by selecting Options > Call  
or Options > Create message:. If the data you  
124  
   
Settings  
Select Menu > Tools > Settings.  
Security — Define the security settings.  
Factory settings — Restore the original settings of  
the device.  
You can define and modify various settings of your  
device. Modifying these settings affects the operation  
of your device across several applications.  
Positioning — Define the positioning method and  
server for GPS-based applications.  
Some settings may be preset for the device or sent to  
you in a special message by your service provider. You  
may not be able to change such settings.  
Personalisation settings  
Select the setting you want to edit to do the following:  
Select Menu > Tools > Settings > General >  
Switch between two values, such as on or off.  
Select a value from a list.  
Personalisation.  
Display settings  
Open a text editor to enter a value.  
To turn the automatic display rotation on or off, select  
Open a slider to decrease or increase the value by  
Display > Display rotation.  
scrolling left or right.  
To select whether you want the image to change to full  
screen in the landscape mode, select Display > Turn  
to full view.  
General settings  
To define the level of light that the device needs before  
switching on the backlight, select Display > Light  
sensor.  
Select Menu > Tools > Settings > General.  
Select from the following:  
Personalisation — Change the displaysettings and  
personalise the device.  
To change the text size, select Display > Font size.  
To adjust the length of time the display can be left idle  
before the screen saver is activated, select Display >  
Power saver time-out.  
Date and time — Change the date and time.  
Slide handling — Change the slide settings.  
Enhancement — Define the settings for your  
enhancements.  
125  
         
To select a welcome note or logo for the display, select To set the volume level of the ringing tone, select  
Display > Welcome note / logo. You can either  
choose the default welcome note, enter your own text,  
or select an image.  
Tones > Ringing volume.  
To set the various alert tones, selectTones > Message  
alert tone, E-mail alert tone, Calendar alarm tone,  
or Clock alarm tone.  
To set how quickly the display dims after the last  
keypress, select Display > Light time-out.  
To set the device to vibrate when you receive a call,  
select Tones > Vibrating alert.  
Standby mode settings  
To set the volume level of the device keypad tones,  
To select whether to use the home screen, select Home  
select Tones > Keypad tones.  
screen > Home screen.  
To set the warning tones on or off, select Tones >  
To change the home screen mode settings, select  
Warning tones.  
Home screen > Mode settings.  
To select whether you want the alarms and incoming  
calls to be silenced when you turn the device face  
down, select Turn to silence.  
To assign shortcuts for the device keys, select Home  
screen > Key shortcuts. These shortcuts are not  
available in the home screen.  
To select whether you want the alarms and incoming  
calls to be silenced when you tap the device twice,  
select Tap to silence.  
To select whether to show or hide the operator logo,  
select Home screen > Operator logo > On or Off.  
To select the mailbox that is shown in the home screen,  
select Home screen > Home screen mailbox.  
Language settings  
To set the language used on the device display, select  
Tone settings  
Language > Phone language.  
To select a ringing tone for voice calls, select Tones >  
To select the language in which you write notes and  
Ringing tone.  
messages, select Language > Writing language.  
To select a ringing tone for video calls, select Tones >  
To select whether to use the predictive text input,  
Video call tone.  
select Language > Predictive text.  
To set the ringing type, select Tones > Ringing  
type. You can also set the device to sound a ringing  
tone that is a combination of the spoken name of the  
caller and the selected ringing tone, when someone  
from your contacts list calls you. Select Tones > Say  
caller's name.  
Notification light  
When you receive a message or miss a call, the scroll  
key starts blinking to indicate the event.  
126  
               
To set the length of time you want the scroll key to  
To define the clock type, select Clock type >  
blink, select Notification light > Blink light for.  
Analogue or Digital.  
To select of which events you want to be notified, select To select the tone for the alarm clock, select Clock  
Notification light > Notified events.  
alarm tone.  
To determine the week days that are work days for you,  
Settings for One-touch keys  
select Workdays.  
Select Menu > Tools > Settings > General >  
Personalisation > One-touch keys.  
Slide settings  
To select which application and task is opened when  
you press a One-touch key, select the key and  
Options > Open.  
Select Menu > Tools > Settings > General > Slide  
handling.  
To restore the preset applications and tasks, select  
To select whether you want to answer a call by opening  
Restore defaults.  
the slide, select Opening the slide.  
To select whether you want to end a call by closing the  
slide, select Closing the slide.  
Date and time settings  
To select whether you want to lock the keypad when  
Select Menu > Tools > Settings > General > Date  
you close the slide, select Keyguard activation.  
and time.  
To set the current date and time, select Date and  
Time.  
Enhancement settings  
To define your time zone, select Time zone.  
Select Menu > Tools > Settings > General >  
Enhancement.  
To update the time, date, and time zone information  
automatically (network service), select Network  
operator time > Auto-update.  
Common enhancement settings  
With most enhancements, you can do the following:  
To select whether to use the 12-hour or 24-hour clock  
system and with which symbol to separate hours and  
minutes, select Time format and Time separator.  
To determine which profile is activated when you  
attach an enhancement to your device, select the  
enhancement and Default profile.  
To determine the date format and separator, select  
Date format and Date separator.  
To let the deviceanswer phone calls automatically after  
5 seconds when an enhancement is attached, select  
Automatic answer > On. If the ringing type is set to  
127  
                 
Beep once or Silent in the selected profile, the  
consecutive incorrect PIN code entries, the code is  
blocked, and you need to use the PUK code to unblock  
it before you can use the SIM card again.  
automatic answer is disabled.  
To illuminate the device while it is attached to an  
enhancement, select Lights > On.  
To set the keypad to lock automatically after a defined  
period, select Phone and SIM card > Keypad  
autolock period.  
E-mail key settings  
To set a time-out after which the device is  
To select which mailbox to open with the e-mail key,  
select E-mail key settings > E-mail key, and press  
the scroll key.  
automatically locked and can be used only if the correct  
lock code is entered, select Phone and SIM card >  
Phone autolock period. Enter a number for the time-  
out in minutes, or select None to set off the autolock  
period. When the device is locked, you can still answer  
incoming calls, and calls may still be possible to the  
official emergency number programmed into your  
device.  
Security settings  
Select Menu > Tools > Settings > General >  
Security.  
To set a new lock code, select Phone and SIM card >  
Lock code. The preset lock code is 12345. Enter the  
current code and then the new code twice. The new  
code can be 4-255 characters long. Both alphabets and  
digits can be used, and both uppercase and lowercase  
alphabets are possible. The device notifies you if the  
lock code is not properly formatted.  
Define the following security settings:  
Phone and SIM card — Adjust the security settings  
for your device and SIM card.  
Certificate management — Manage your security  
certificates.  
Security module — Manage your security module.  
Avoid using codes that are similar to emergency  
numbers to prevent accidental dialling of the  
emergency number. Codes are shown as asterisks.  
When you change a code, enter the current code, then  
the new code twice.  
Restore original settings  
To restore the original device settings, select Factory  
settings. To do this, you need your device lock code.  
After resetting, the device may take a longer time to  
power on. Documents, contact information, calendar  
entries, and files are unaffected.  
Device and SIM card security  
To change the PIN code, select Phone and SIM card >  
PIN code. The new code must be 4 to 8 digits long. The  
PIN code protects your SIM card against unauthorised  
use and is provided with the SIM card. After three  
128  
             
To send a text message automatically to the person  
who is calling you informing why you cannot answer  
the incoming call, select Call > Reject call with  
SMS > Yes. To set the text for the message, select  
Call > Message text.  
Telephone settings  
Select Menu > Tools > Settings > Phone.  
Select from the following:  
Call — Define general call settings.  
Call divert — Define your call divert settings. See  
"Call divert", p. 84.  
To set off the contact search on the home screen, select  
Call > Contact search > Off.  
Call barring — Define your call barring settings.  
See "Call barring", p. 84.  
Network settings  
Network — Adjust the network settings.  
Select Menu > Tools > Settings > Phone >  
Network.  
To select the network mode, select Network mode  
and Dual mode, UMTS, or GSM. In the dual mode, the  
device switches automatically between networks.  
Call settings  
To display your phone number to the person you are  
calling, select Call > Send my caller ID > Yes. To let  
the network determine whether your caller ID is sent,  
select Set by network.  
Tip: UMTS enables faster data transfer, but may  
increase the demand on battery power and  
reduce the battery life. In regions close to both  
GSM and UMTS networks, selecting Dual mode  
may cause constant jumping between the two  
networks, which also increases the demand on  
battery power.  
To display your net call address to the person you are  
calling using a net call, select Call > Send my internet  
call ID > Yes.  
To be notified of a new incoming call while you have a  
call in progress, select Call > Call waiting >  
To select the operator, select Operator selection and  
Manual to choose from available networks, or  
Automatic to have the device select the network  
automatically.  
To set the device to indicate when it is used in Micro  
Cellular Network (MCN), select Cell info display >  
On.  
Options > Activate. To check if the function is active  
on the network, select Options > Check status.  
To select whether net calls alert or not, select Call >  
Internet call alert. You are notified of missed net calls  
with a notification.  
To set the default call type, select Call > Default call  
type and select Voice call if you make a GSM calls, or  
Internet call if you make net calls.  
129  
         
An internet access point is a collection of settings,  
which define how the device creates a data connection  
to the network. To use e-mail and multimedia services  
or to browse web pages, you must first define access  
points for these services.  
Connection settings  
Select Menu > Tools > Settings > Connection.  
Select from the following:  
Bluetooth — Edit the Bluetooth settings. See "Send  
and receive data with Bluetooth", p. 107.  
USB — Edit the data cable settings. See "Data  
cable", p. 105.  
Some or all access points may be preset for your device  
by your service provider, and you may not be able to  
create, edit, or remove them.  
To create a new access point, select Options > New  
access point or select an existing access point from the  
list and then Options > Duplicate access point to use  
the access point as a basis for the new one.  
Access points — Set up new or edit existing access  
points. Some or all access points may be preset for  
your device by your service provider, and you may  
not be able to create, edit, or remove them.  
Packet data — Determine when packet data  
connections are used, and enter the access point if  
you use your device as a modem for a computer.  
Wireless LAN — Determine if the device displays an  
indicator when a WLAN is available, and how often  
the device searches for networks.  
Packet data (GPRS) settings  
Select Menu > Tools > Settings > Connection >  
Packet data.  
Your device supports packet data connections, such as  
GPRS in the GSM network. When you are using your  
device in GSM and UMTS networks, it is possible to have  
multiple data connections active at the same time;  
access points can share a data connection, and data  
connections remain active, for example, during voice  
calls. See "Connection manager", p. 112.  
Data call — Setthe time-out period after which data  
call connections automatically end.  
SIP settings — View or create session initiation  
Internet tel. — Define settings for net calls.  
Configurations — View and delete trusted servers  
from which your device may receive configuration  
settings.  
To define the packet data settings, select Packet data  
connection and select When available to register the  
device to the packet data network when you switch the  
device on in a supported network, or When needed to  
establish a packet data connection only when an  
application or action requires it. Select Access point  
and enter the access point name provided by your  
service provider to use the device as a packet data  
modem to your computer. To use a high-speed data  
APN control — Restrict packet data connections.  
See "Restrict packet data", p. 135.  
Access points  
Select Menu > Tools > Settings > Connection >  
130  
Access points.  
         
connection, select High speed packet access >  
RTS threshold — Select the data packet size at  
which the WLAN access point device issues a request  
to send before sending the packet.  
Enabled.  
These settings affect all access points for packet data  
connections.  
TX power level — Select the power level of your  
device when sending data.  
Radio measurements — Enable or disable the  
radio measurements.  
WLAN settings  
Power saving — Select whether to use the WLAN  
power saving mechanism to save the power in the  
device battery. Using the power saving mechanism  
enhances the battery performance but may weaken  
WLAN interoperability.  
Select Menu > Tools > Settings > Connection >  
Wireless LAN.  
To have an indicator displayed when there is a WLAN  
available in your current location, select Show WLAN  
availability > Yes.  
To restore all settings to their original values, select  
Options > Restore defaults.  
To select the interval for your device to scan for  
available WLANs and update the indicator, select Scan  
for networks. This setting is not available unless you  
select Show WLAN availability > Yes.  
WLAN security settings  
Select Menu > Tools > Settings > Connection >  
Access points > Options > New access point, or  
select an access point and Options > Edit.  
Advanced WLAN settings  
Select Options > Advanced settings. The advanced  
WLAN settings are normally defined automatically, and  
changing them is not recommended.  
In the access point settings, select WLAN security  
mode and the desired mode.  
To edit the settings manually, select Automatic  
WEP security settings  
configuration > Disabled, and define the following:  
Long retry limit — Enter the maximum number of  
transmission attempts if the device does not receive  
a receiving acknowledgement signal from the  
network.  
Select WEP as the WLAN security mode.  
The wired equivalent privacy (WEP) encryption method  
encrypts data before it is transmitted. Access to the  
network is denied to users who do not have the  
required WEP keys. When the WEP security mode is in  
use, and your device receives a data packet not  
encrypted with the WEP keys, the data is discarded.  
Short retry limit — Enter the maximum number of  
transmission attempts if the device does not receive  
a clear-to-send signal from the network.  
131  
               
In an ad-hoc network, all devices must use the same  
WEP key.  
EAP plug-in settings — If you selected WPA/  
WPA2 > EAP, select which EAP plug-ins defined in  
your device to use with the access point.  
Pre-shared key — If you selected WPA/WPA2 >  
Pre-shared key, enter the shared private key that  
identifies your device to the WLAN to which you  
connect.  
Select WLAN security settings and fromthe following:  
WEP key in use — Select the desired WEP key.  
Authentication type — Select Open or Shared.  
WEP key settings — Edit the settings for the WEP  
key.  
WPA security settings  
WEP key settings  
Select WPA/WPA2 as the WLAN security mode.  
Select WLAN security settings and from the following:  
In an ad-hoc network, all devices must use the same  
WEP key.  
WPA/WPA2 — Select EAP (Extensible  
Select WLAN security settings > WEP key settings  
Authentication Protocol) or Pre-shared key (a  
secret key used for device identification).  
EAP plug-in settings — If you select WPA/WPA2 >  
EAP, select which EAP plug-ins defined in your  
device to use with the access point.  
and from the following:  
WEP encryption — Select the desired WEP  
encryption key length.  
WEP key format — Select whether you want to  
enter the WEP key data in ASCII or Hexadecimal  
format.  
Pre-shared key — If you select WPA/WPA2 > Pre-  
shared key, enter the shared private key that  
identifies your device to the WLAN to which you  
connect.  
WEP key — Enter the WEP key data.  
WPA2 only mode — To allow both TKIP and AES  
(Advanced Encryption Standard) encryption, select  
Off. To allow AES only, select On  
802.1x security settings  
Select 802.1x as the WLAN security mode.  
802.1x authenticates and authorises devices to access  
a wireless network, and prevents access if the  
authorisation process fails.  
Wireless LAN plugins  
Select Menu > Tools > Settings > Connection >  
Select WLAN security settings and fromthe following:  
Access points.  
WPA/WPA2 — Select EAP (Extensible  
The EAP (extensible authentication protocol) plug-ins  
are used in wireless networks to authenticate wireless  
devices and authentication servers, and the different  
Authentication Protocol) or Pre-shared key (a  
secret key used for device identification).  
132  
             
EAP plug-ins make possible the use of various EAP  
methods (network service).  
Session initiation protocol  
(SIP) settings  
You can view the EAP plug-ins currently installed in  
your device (network service).  
Select Menu > Tools > Settings > Connection >  
SIP settings.  
EAP plug-ins  
Session initiation protocols (SIP) are used for creating,  
modifying, and terminating certain types of  
1. To define the EAP plug-in settings, select Options >  
New access point and define an access point that  
uses WLAN as a data bearer.  
communication sessions with one or more participants  
(network service). Typical communication sessions are  
video sharing and net calls. SIP profiles include settings  
for these sessions. The SIP profile used by default for a  
communication session is underlined.  
2. Select 802.1x or WPA/WPA2 as the security mode.  
3. Select WLAN security settings > WPA/WPA2 >  
EAP > EAP plug-in settings.  
To create a SIP profile, select Options > New SIP  
profile > Use default profile or Use existing  
profile.  
To select the SIP profile you want to use by default for  
communication sessions, select Options > Default  
profile.  
Use EAP plug-ins  
To use an EAP plug-in when you connect to a WLAN  
using the access point, select the desired plug-in and  
Options > Enable. The EAP plug-ins enabled for use  
with this access point have a check mark next to them.  
To not use a plug-in, select Options > Disable.  
To edit the EAP plug-in settings, select Options >  
Edit SIP profiles  
Edit.  
Select Options > Edit, and select from the following:  
To change the priority of the EAPplug-insettings, select  
Options > Raise priority to attempt to use the plug-  
in before other plug-ins when connecting to the  
network with the access point, or Options > Lower  
priority to use this plug-in for network authentication  
after attempting to use other plug-ins.  
Profile name — Enter a name for the SIP profile.  
Service profile — Select IETF or Nokia 3GPP.  
Default access point — Select the access point to  
use for the internet connection.  
Public user name — Enter your user name received  
from your service provider.  
See the device help for more information on EAP  
plugins.  
Use compression — Select if compression is used.  
Registration — Select the registration mode.  
Use security — Select if security negotiation is  
used.  
133  
               
Proxy server — Enter the proxy server settings for  
this SIP profile.  
User name and Password — Enter your user name  
and password for the registrar server.  
Transport type — Select UDP, Auto, or TCP.  
Port — Enter the port number of the registrar  
server.  
Registrar server — Enter the registration server  
settings for this SIP profile.  
Edit SIP proxy servers  
Net call settings  
Select Options > New SIP profile or Edit > Proxy  
server.  
Select Menu > Tools > Settings > Connection >  
Internet tel..  
Proxy servers are intermediate servers between a  
browsing service and its users used by some service  
providers. These servers may provide additional  
security and speed up access to the service.  
To create a new net call profile, select Options > New  
profile.  
To edit an existing profile, select Options > Edit.  
Select from the following:  
Proxy server address — Enter the host name or IP  
Configuration settings  
address of the proxy server in use.  
Realm — Enter the proxy server realm.  
User name and Password — Enter your user name  
and password for the proxy server.  
Select Menu > Tools > Settings > Connection >  
Configurations.  
You can receive messages from your service provider  
or company information management containing  
configuration settings for trusted servers. These  
settings are automatically saved in Configurations.  
You may receive configuration settings for access  
points, multimedia, or e-mail services, and IM or  
synchronisation settings from trusted servers.  
Allow loose routing — Select if loose routing is  
allowed.  
Transport type — Select UDP, Auto, or TCP.  
Port — Enter the port number of the proxy server.  
Edit registration servers  
To delete configurations for a trusted server, select  
Options > Delete. The configuration settings for  
other applications provided by this server are also  
deleted.  
Select Options > New SIP profile or Edit > Registrar  
server.  
Select from the following:  
Registrar server address — Enter the host name  
or IP address of the registrar server in use.  
Realm — Enter the registrar server realm.  
134  
               
Restrict packet data  
Select Menu > Tools > Settings > Connection >  
APN control.  
With the access point control service, you can restrict  
packet data connections from your device to certain  
access points only. Your SIM card may not support the  
access point control service. Contact your service  
provider for more information.  
To restrict the packet data connections from your  
device, select Options > Activate restrictions. You  
need your PIN2 code to activate and deactivate access  
point control or to edit the packet data access points  
on the control list.  
To add access points that can be used for packet data  
connections to the control list, select Options > Add  
name manually. To enable connections to an  
operator-provided access point, create an empty  
access point.  
To remove access points from the list, select Options >  
Remove.  
Application settings  
Select Menu > Tools > Settings > Applications.  
Select an application from the list to adjust its settings.  
135  
       
Shortcuts  
Here are some of the available keyboard shortcuts in  
your device. Shortcuts can make the use of the  
applications more efficient.  
Number key (2– Call a phone number using speed  
9)  
dialling. You must first activate  
speed dialling at Menu > Tools >  
Settings > Phone > Call >  
Speed dialling > On.  
General shortcuts  
Web  
General shortcuts  
*
Zoom in the page.  
Zoom out the page.  
Open the search dialog.  
View the active pages.  
View the page overview.  
Power key  
Press and hold to switch your device  
#
2
5
8
9
on and off.  
Press once to switch between  
profiles.  
Home screen  
Left selection  
Lock and unlock the keypad.  
Open the call log.  
Open the dialog for entering a new  
key + *  
web address.  
Call key  
0
Open the bookmarks folder.  
0
Press and hold to open your home  
Image viewer  
page in the Web browser.  
Call key  
0
5
Send the image.  
Zoom out.  
Zoom in.  
#
1
Press and hold to switch between  
the Silent and General profiles.  
Press and hold to call your voice  
mailbox.  
136  
     
7
Zoom in. Press twice for the full  
screen size.  
4
6
2
8
3
1
*
Scroll left in the zoomed image.  
Scroll right in the zoomed image.  
Scroll up in the zoomed image.  
Scroll down in the zoomed image.  
Rotate clockwise.  
Rotate counterclockwise.  
Switch between the full screen size  
and normal view.  
137  
Glossary  
Glossary  
but this translation is needed because  
the internet is based on IP addresses.  
3G  
3rd generation mobile  
DTMF tones Dual-tone multifrequency tones. The  
DTMF system is used by touch-tone  
telephones. DTMF assigns a specific  
frequency, or tone, to each key so that  
it can easily be identified by a  
communications. A digital system for  
mobile communications which aims at  
global use and provides increased  
bandwidth. 3G lets a mobile device  
user access a wide variety of services,  
such as multimedia.  
microprocessor. DTMF tones allow you  
to communicate with voice mailboxes,  
computerised telephony systems, and  
so on.  
Ad-hoc  
operating  
mode  
A WLAN network mode where two or  
more devices connect to each other  
using WLAN directly without a WLAN  
access point.  
EAP  
Extensible authentication protocol.  
EAP plug-ins are used in wireless  
networks to authenticate wireless  
devices and authentication servers.  
Enhanced GPRS. EGPRS is similar to  
GPRS, but it enables faster connection.  
For availability and data transfer  
speed, contact your service provider.  
Cookies  
Cookies are little pieces of information,  
given by the server to you, to store  
information about your visits to a web  
site. When you accept cookies, the  
server is able to evaluate your use of  
the web site, what you are interested  
in, what you want to read, and so on.  
EGPRS  
DNS  
Domain name service. An internet  
service that translates domain names  
such as www.nokia.com into IP  
addresses such as 192.100.124.195.  
Domain names are easier to remember  
138  
 
GPRS  
General packet radio service. GPRS  
enables wireless access for mobile  
phones to data networks (network  
service). GPRS uses packet data  
technology where information is sent  
in short bursts of data over the mobile  
network. The benefit of sending data  
in packets is that the network is  
occupied only when sending or  
receiving data. As GPRS uses the  
network efficiently, it allows for quick  
data connection setup and fast data  
transmission speeds.  
HTTP  
Hypertext transfer protocol. A  
document transfer protocol used in the  
web.  
HTTP over a secure connection.  
Internet mail access protocol, version  
4. A protocol used for accessing your  
remote mailbox.  
An access point is where your device  
HTTPS  
IMAP4  
Internet  
access point connects to a network. To use e-mail  
and multimedia services or to connect  
to the internet and browse web pages,  
you must first define internet access  
points for these services.  
You must subscribe to the GPRS service.  
For availability and subscription to  
GPRS, contact your service provider.  
Infrastructur A WLAN network mode where devices  
e operating are connected to WLAN using a WLAN  
During a voice call, you cannot  
establish a GPRS connection, and any  
existing GPRS connection is put on hold  
unless the network supports dual  
transfer mode.  
mode  
PIN  
access point.  
Personal identity number. The PIN  
code protects your device from  
unauthorised use. The PIN code is  
supplied with the SIM card. If the PIN  
code request is selected, the code is  
required each time the device is  
switched on. The PIN code must be 4 to  
8 digits long.  
The PIN2 code is supplied with some  
SIM cards. The PIN2 code is required to  
access certain functions supported by  
the SIM card. The length of the PIN2  
code is 4 to 8 digits.  
GPS  
Global positioning system. GPS is a  
worldwide radio navigation system.  
HSDPA  
High-speed downlink packet access.  
HSDPA brings high-speed data delivery  
to 3G terminals, ensuring that users  
requiring effective multimedia  
PIN2  
capabilities benefit from data rates  
previously unavailable because of  
limitations in theradio access network.  
139  
browse the web faster than previously  
possible while simultaneously  
speaking on the phone.  
PIN code used in UMTS network.  
UPIN Unblocking Key. UPUK code is  
required to change a blocked UPIN  
code or PIN2 code. The length of the  
code is 8 digits.  
POP3  
Post office protocol, version 3. A  
common mail protocol that can be  
used for accessing your remote  
mailbox.  
Personal Unblocking Key. PUK and PUK2  
codes are required to change a blocked  
PIN code or PIN2 code, respectively.  
The length of the code is 8 digits.  
Session Initiation Protocol. SIP is used  
for creating, modifying, and  
terminating certain types of  
communication sessions with one or  
more participants.  
UPIN  
UPUK  
PUK and  
PUK2  
SIP  
USIM  
SIM card used in UMTS network.  
USSD  
A service request, such as request to  
activate an application or configure  
various settings remotely, that you can  
send to your operator or service  
provider with your device.  
Voice over IP technology. VoIP is a set  
of protocols that facilitate phone calls  
over an IP network, such as the  
internet.  
Virtual private network. VPN creates a  
secure connection to compatible  
corporate intranet and services, such  
as e-mail.  
Wireless application protocol. WAP is  
an international standard for wireless  
communication.  
command  
SSID  
Service set identifier. SSID is the name  
that identifies the specific WLAN.  
VoIP  
VPN  
Streaming  
Streaming audio and video files means  
playing them directly from the web  
without downloading them first to  
your device.  
UMTS  
Universal Mobile Telecommunications  
System. UMTS is a 3G mobile  
communication system. Besides voice  
and data, UMTS enables audio and  
video delivery to wireless devices.  
WAP  
WEP  
When you use your device in GSM and  
UMTS networks, multiple data  
connections can be active at the same  
time, and access points can share a  
data connection. In the UMTS network,  
data connections remain active during  
voice calls. You can, for example,  
Wired equivalent privacy. WEP is an  
encryption method that encrypts data  
before it is transmitted in WLAN.  
Wireless local area network.  
140  
WLAN  
WPA  
Wi-Fi Protected Access. Security  
method for WLAN.  
WPA2  
Wi-Fi Protected Access 2. Security  
method for WLAN.  
141  
Troubleshooting  
To see frequently asked questions about your device,  
visit the product support pages at the Nokia web site.  
Q: Why can’t I find my friend’s device while  
using Bluetooth connectivity?  
Q: What is my lock, PIN, or PUK code?  
A: Check that both devices are compatible, have  
activated Bluetooth connectivity, and are not in the  
hidden mode. Check also that the distance between the  
two devices is not over 10 metres (33 feet) and that  
there are no walls or other obstructions between the  
devices.  
A: The default lock code is 12345. If you forget or lose  
the lock code, contact your device dealer. If you forget  
or lose a PIN or PUK code, or if you have not received  
such a code, contact your network service provider.  
Q: How do I close an application that is not  
Q: Why can’t I end a Bluetooth connection?  
responding?  
A: If another device is connected to your device, you  
can end the connection using the other device or by  
deactivating Bluetooth connectivity. Select Menu >  
Connectivity > Bluetooth > Bluetooth > Off.  
A: Press and hold the home key. Scroll to the  
application, and press the backspace key to close the  
application.  
Q: Why do images look smudgy?  
Q: Why can't I see a WLAN access point even  
A: Ensure that the camera lens protection windows are  
though I know I'm within its range?  
clean.  
A: Check that the Offline profile is not in use in your  
device.  
Q: Why do missing, discoloured, or bright  
dots appear on the screen every time I switch  
on my device?  
The WLAN access point may use a hidden service set  
identifier (SSID). You can only access networks that use  
a hidden SSID if you know the correct SSID, and have  
created a WLAN access point for the network on your  
Nokia device  
A: This is a characteristic of this type of display. Some  
displays may contain pixels or dots that remain on or  
off. This is normal, not a fault.  
Check that the WLAN access point is not on channels  
142  
12-13, as they cannot be associated with.  
   
Q: How do I switch WLAN off on my Nokia  
device?  
Q: Why do I have problems with the security  
mode?  
A: The WLAN on your Nokia device switches off when  
A: Check that you have configured the security mode  
you are not trying to connect, not connected to another correctly, and that it is the same that the network uses.  
access point, or not scanning for available networks.  
To check the security mode the network uses, select  
To further reduce battery consumption, you can specify Menu > Connectivity > Conn. mgr. > Active data  
that your Nokia device does not scan, or scans less  
often, for available networks in the background. WLAN  
switches off in between background scans.  
connections > Options > Details.  
Check also the following: you have the correct WPA  
mode (preshared key or EAP), you have disabled all EAP  
To stop the background scans, select Menu > Tools > types that are not needed, and all the EAP type settings  
Settings > Connection > Wireless LAN > Show  
WLAN availability > Never. You can still manually  
scan for available WLAN networks and connect to WLAN  
networks as usual.  
are correct (passwords, user names, certificates).  
Q: Why can’t I select a contact for my  
message?  
A: The contact card does not have a phone number, an  
address, or an e-mail address. Select Menu >  
To increase the background scan interval, select Show  
WLAN availability > Yes, and define the interval in  
Scan for networks.  
Communic. > Contacts, and edit the contact card.  
Q: The note Retrieving message is shown  
Q: Why can't I browse the web even though  
the WLAN connection is working and the IP  
settings are correct?  
briefly. What is happening?  
A: The device is trying to retrieve a multimedia  
message from the multimedia messaging centre. This  
note is shown if you have selected Menu >  
A: Check that you have defined the HTTP/ HTTPS proxy  
settings correctly in the advanced settings of your  
WLAN access point.  
Communic. > Messaging > Options > Settings >  
Multimedia message > Multimedia retrieval >  
Always automatic. Check that the settings for  
multimedia messaging are defined correctly and that  
there are no mistakes in phone numbers or addresses.  
See "Multimedia message settings", p. 75.  
Q: How do I check the signal quality of my  
WLAN connection?  
Select Menu > Connectivity > Conn. mgr. > Active  
data connections > Options > Details. If the signal  
quality is weak or moderate, you may encounter  
connection problems. Try again closer to the access  
point.  
143  
Set the device to use a packet data connection only  
if you start an application or action that needs it.  
Select Menu > Tools > Settings > Connection >  
Packet data > Packet data connection > When  
needed.  
Q: How can I end the data connection when  
the device starts a data connection again and  
again?  
A: The device may be trying to retrieve a multimedia  
message from the multimedia message centre. To stop  
the device from making a data connection, select  
Menu > Communic. > Messaging > Options >  
Settings > Multimedia message > Multimedia  
retrieval > Manual to have the multimedia  
Prevent the device from automatically downloading  
new maps in the Maps application. Select Menu >  
GPS > Maps > Options > Settings > Internet >  
Use network > Off.  
Change the time-out after which the backlight is  
switched off. Select Menu > Tools > Settings >  
General > Personalisation > Display > Light  
time-out.  
messaging centre save messages to be retrieved later,  
or Off to ignore all incoming multimedia messages. If  
you select Manual, you receive a notification when  
there is a new multimedia message that you can  
retrieve in the multimedia message centre. If youselect  
Off, the device does not make any network connections  
related to multimedia messaging.  
Close the applications you do not use. Press and hold  
the home key. Scroll to the application, and press  
the backspace key to close the application.  
To set the device to use a packet data connection only  
if you start an application or action that needs it, select  
Menu > Tools > Settings > Connection > Packet  
data > Packet data connection > When needed.  
If this does not help, switch the device off, and switch  
it on again.  
Q: How do I save battery power?  
A: Many features in your device increase the demand  
on battery power and reduce the battery life time. To  
save battery power, do the following:  
Switch off Bluetooth when you do not need it.  
Stop the background scans for WLAN. Select Menu >  
Tools > Settings > Connection > Wireless  
LAN > Show WLAN availability > Never. You can  
still manually scan for available WLAN networks and  
connect to WLAN networks as usual.  
144  
Enhancements  
Warning: Use only batteries, chargers, and  
enhancements approved by Nokia for use with this  
particular model. The use of any other types may  
invalidate any approval or warranty, and may be  
dangerous.  
For availability of approved enhancements, please  
check with your dealer. When you disconnect the  
power cord of any enhancement, grasp and pull the  
plug, not the cord.  
145  
 
Battery and charger information  
take several minutes before the charging indicator  
Battery and charger  
appears on the display or before any calls can be made.  
Always switch the device off and disconnect the  
information  
charger before removing the battery.  
Unplug the charger from the electrical plug and the  
device when not in use. Do not leave a fully charged  
battery connected to a charger, since overcharging  
may shorten its lifetime. If left unused, a fully charged  
battery will lose its charge over time.  
Your device is powered by a rechargeable battery. The  
battery intended for use with this device is BL-4U.  
Nokia may make additional battery models available  
for this device. This device is intended for use when  
supplied with power from the following chargers:  
AC-8. The exact charger model number may vary  
depending on the type of plug. The plug variant is  
identified by one of the following: E, EB, X, AR, U, A, C,  
or UB.  
Always try to keep the battery between 15°C and 25°C  
(59°F and 77°F). Extreme temperatures reduce the  
capacity and lifetime of the battery. A device with a hot  
or cold battery may not work temporarily. Battery  
performance is particularly limited in temperatures  
well below freezing.  
The battery can be charged and discharged hundreds  
of times, but it will eventually wear out. When the talk  
and standby times are noticeably shorter than normal,  
replace the battery. Use only Nokia approved batteries,  
and recharge your battery only with Nokia approved  
chargers designated for this device. Use of an  
Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object such as a  
coin, clip, or pen causes direct connection of the  
positive (+) and negative (-) terminals of the battery.  
(These look like metal strips on the battery.) This might  
happen, for example, when you carry a spare battery  
in your pocket or purse. Short-circuiting the terminals  
may damage the battery or the connecting object.  
unapproved battery or charger may present a risk of  
fire, explosion, leakage, or other hazard.  
If a battery is being used for the first time or if the  
battery has not been used for a prolonged period, it  
may be necessary to connect the charger, then  
disconnect and reconnect it to begin charging the  
battery. If the battery is completely discharged, it may  
Do not dispose of batteries in a fire as they may  
explode. Batteries may also explode if damaged.  
Dispose of batteries according to local regulations.  
146  
   
Please recycle when possible. Do not dispose as  
household waste.  
Successful completion of the steps is not a total  
assurance of the authenticity of the battery. If you have  
any reason to believe that your battery is not an  
authentic, original Nokia battery, you should refrain  
from using it, and take it to the nearest Nokia  
authorised service centre or dealer for assistance. If  
authenticity cannot be verified, return the battery to  
the place of purchase.  
Do not dismantle, cut, open, crush, bend, deform,  
puncture, or shred cells or batteries. In the event of a  
battery leak, do not allow the liquid to come in contact  
with the skin or eyes. In the event of such a leak, flush  
your skin or eyes immediately with water, or seek  
medical help.  
Do not modify, remanufacture, attempt to insert  
foreign objects into the battery, or immerse or expose  
it to water or other liquids.  
Authenticate hologram  
1. When you look at the hologram  
on the label, you should see the  
Nokia connecting hands  
Improper battery use may result in a fire, explosion, or  
other hazard. If the device or battery is dropped,  
especially on a hard surface, and you believe the  
battery has been damaged, take it to a service centre  
for inspection before continuing to use it.  
symbol from one angle and the  
Nokia Original Enhancements  
logo when looking from  
Use the battery only for its intended purpose. Never use  
any charger or battery that is damaged. Keep your  
battery out of the reach of small children.  
another angle.  
2. When you angle the hologram  
left, right, down and up, you  
should see 1, 2, 3 and 4 dots on  
each side respectively.  
Nokia battery  
authentication  
guidelines  
What if your battery is not  
authentic?  
Always use original Nokia batteries for your safety. To  
check that you are getting an original Nokia battery,  
purchase it from a Nokia authorised service centre or  
dealer, and inspect the hologram label using the  
following steps:  
If you cannot confirm that your Nokia battery with the  
hologram on the label is an authentic Nokia battery,  
please do not use the battery. Take it to the nearest  
147  
     
Nokia authorised service centre or dealer for  
assistance. The use of a battery that is not approved by  
Nokia may be dangerous and may result in poor  
performance and damage to your device and its  
accessories. It may also invalidate any approval or  
warranty applying to the device.  
To find out more about original Nokia batteries, see  
www.nokia.com/battery.  
148  
Care and maintenance  
Your device is a product of superior design and  
craftsmanship and should be treated with care. The  
following suggestions will help you protect your  
warranty coverage.  
Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the device.  
Do not paint the device. Paint can clog the moving  
parts and prevent proper operation.  
Keep the device dry. Precipitation, humidity, and all  
types of liquids or moisture can contain minerals  
that will corrode electronic circuits. If your device  
does get wet, remove the battery, and allow the  
device to dry completely before replacing it.  
Use a soft, clean, dry cloth to clean any lenses, such  
ascamera, proximitysensor, and lightsensor lenses.  
Use only the supplied or an approved replacement  
antenna. Unauthorised antennas, modifications, or  
attachments could damage the device and may  
violate regulations governing radio devices.  
Do not use or store the device in dusty, dirty areas.  
Its moving parts and electronic components can be  
damaged.  
Use chargers indoors.  
Always create a backup of data you want to keep,  
Do not store the device in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt certain  
plastics.  
such as contacts and calendar notes.  
To reset the device from time to time for optimum  
performance, power off the device and remove the  
battery.  
Do not store the device in cold areas. When the  
device returns to its normal temperature, moisture  
can form inside the device and damage electronic  
circuit boards.  
These suggestions apply equally to your device,  
battery, charger, or any enhancement. If any device is  
not working properly, take it to the nearest authorised  
service facility for service.  
Do not attempt to open the device other than as  
instructed in this guide.  
Do not drop, knock, or shake the device. Rough  
handling can break internal circuit boards and fine  
mechanics.  
149  
 
Disposal  
The crossed-out wheeled-bin symbol on your  
product, literature, or packaging reminds you  
that all electrical and electronic products,  
batteries, and accumulators must be taken to  
separate collection at the end of their working life. This  
requirement applies to the European Union and other  
locations where separate collection systems are  
available. Do not dispose of these products as unsorted  
municipal waste.  
By returning the products to collection you help  
prevent uncontrolled waste disposal and promote the  
reuse of material resources. More detailed information  
is available from the product retailer, local waste  
authorities, national producer responsibility  
organizations, or your local Nokia representative. For  
the product Eco-Declaration or instructions for  
returning your obsolete product, go to country-specific  
information at www.nokia.com.  
150  
 
Additional safety information  
Small children  
Medical devices  
Your device and its enhancements may contain small  
parts. Keep them out of the reach of small children.  
Operation of any radio transmitting equipment,  
including wireless phones, may interfere with the  
functionality of inadequately protected medical  
devices. Consult a physician or the manufacturer of the  
medical device to determine if they are adequately  
shielded from external RF energy or if you have any  
questions. Switch off your device in health care  
facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care facilities  
may be using equipment that could be sensitive to  
external RF energy.  
Operating  
environment  
This device meets RF exposure guidelines when used  
either in the normal use position against the ear or  
when positioned at least 2.2 centimetres (7/8 inch)  
away from the body. When a carry case, belt clip, or  
holder is used for body-worn operation, it should not  
contain metal and should position the device the  
above-stated distance from your body.  
Implanted medical devices  
Manufacturers of medical devices recommend that a  
minimum separation of 15.3 centimetres (6 inches)  
should be maintained between a wireless device and  
an implanted medical device, such as a pacemaker or  
implanted cardioverter defibrillator, to avoid potential  
interference with the medical device. Persons who  
have such devices should:  
To transmit data files or messages, this device requires  
a quality connection to the network. In some cases,  
transmission of data files or messages may be delayed  
until such a connection is available. Ensure the above  
separation distance instructions are followed until the  
transmission is completed.  
Always keep the wireless device more than 15.3  
centimetres (6 inches) from the medical device  
when the wireless device is turned on.  
Parts of the device are magnetic. Metallic materials  
may be attracted to the device. Do not place credit  
cards or other magnetic storage media near the device,  
because information stored on them may be erased.  
151  
       
Not carry the wireless device in a breast pocket.  
warranty that may apply to the device. Check regularly  
that all wireless device equipment in your vehicle is  
mounted and operating properly. Do not store or carry  
flammable liquids, gases, or explosive materials in the  
same compartment as the device, its parts, or  
enhancements. For vehicles equipped with an air bag,  
remember that air bags inflate with great force. Do not  
place objects, including installed or portable wireless  
equipment in the area over the air bag or in the air bag  
deployment area. If in-vehicle wireless equipment is  
improperly installed and the air bag inflates, serious  
injury could result.  
Hold the wireless device to the ear opposite the  
medical device to minimise the potential for  
interference.  
Turn the wireless device off immediately if there is  
any reason to suspect that interference is taking  
place.  
Read and follow the directions from the  
manufacturer of their implanted medical device.  
If you have any questions about using your wireless  
device with an implanted medical device, consult your  
health care provider.  
Using your device while flying in aircraft is prohibited.  
Switch off your device before boarding an aircraft. The  
use of wireless teledevices in an aircraft may be  
dangerous to the operation of the aircraft, disrupt the  
wireless telephone network, and may be illegal.  
Hearing aids  
Some digital wireless devices may interfere with some  
hearing aids. If interference occurs, consult your  
service provider.  
Potentially explosive  
environments  
Vehicles  
Switch off your device when in any area with a  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles such as electronic fuel injection systems,  
electronic antiskid (antilock) braking systems,  
electronic speed control systems, and air bag systems.  
For more information, check with the manufacturer, or  
its representative, of your vehicle or any equipment  
that has been added.  
potentially explosive atmosphere, and obey all signs  
and instructions. Potentially explosive atmospheres  
include areas where you would normally be advised to  
turn off your vehicle engine. Sparks in such areas could  
cause an explosion or fire resulting in bodily injury or  
even death. Switch off the device at refuelling points  
such as near gas pumps at service stations. Observe  
restrictions on the use of radio equipment in fuel  
depots, storage, and distribution areas; chemical  
plants; or where blasting operations are in progress.  
Only qualified personnel should service the device or  
install the device in a vehicle. Faulty installation or  
service may be dangerous and may invalidate any  
152  
     
Areas with a potentially explosive atmosphere are  
often, but not always, clearly marked. They include  
below deck on boats, chemical transfer or storage  
facilities and areas where the air contains chemicals or  
particles such as grain, dust, or metal powders. You  
should check with the manufacturers of vehicles using  
liquefied petroleum gas (such as propane or butane) to  
determine if this device can be safely used in their  
vicinity.  
Change your profile from offline or flight profile  
mode to an active profile.  
2. Press the end key as many times as needed to clear  
the display and ready the device for calls.  
3. Enter the official emergency number for your  
present location. Emergency numbers vary by  
location.  
4. Press the call key.  
When making an emergency call, give all the necessary  
information as accurately as possible. Your wireless  
device may be the only means of communication at the  
scene of an accident. Do not end the call until given  
permission to do so.  
Emergency calls  
Important: This device operates using radio  
signals, wireless networks, landline networks, and  
user-programmed functions. If your device supports  
voice calls over the internet (internet calls), activate  
both the internet calls and the cellular phone. The  
device will attempt to make emergency calls over both  
the cellular networks and through your internet call  
provider if both are activated. Connections in all  
conditions cannot be guaranteed. You should never  
rely solely on any wireless device for essential  
communications like medical emergencies.  
CERTIFICATION  
INFORMATION (SAR)  
This mobile device meets guidelines for exposure  
to radio waves.  
Your mobile device is a radio transmitter and receiver.  
It is designed not to exceed the limits for exposure to  
radio waves recommended by international  
To make an emergency call:  
guidelines. These guidelines were developed by the  
independent scientific organisation ICNIRP and include  
safety margins designed to assure the protection of all  
persons, regardless of age and health.  
1. If the device is not on, switch it on. Check for  
adequate signal strength. Depending on your  
device, you may also need to complete the  
following:  
The exposure guidelines for mobile devices employ a  
unit of measurement known as the Specific Absorption  
Rate or SAR. The SAR limit stated in the ICNIRP  
Insert a SIM card if your device uses one.  
Remove certain call restrictions you have  
153  
guidelines is 2.0 watts/kilogram (W/kg) averaged over  
10 grams of tissue. Tests for SAR are conducted using  
activated in your device.  
   
standard operating positions with the device  
transmitting at its highest certified power level in all  
tested frequency bands. The actual SAR level of an  
operating device can be below the maximum value  
because the device is designed to use only the power  
required to reach the network. That amount changes  
depending on a number of factors such as how close  
you are to a network base station. The highest SAR  
value under the ICNIRP guidelines for use of the device  
at the ear is 1.37 W/kg.  
Use of device accessories and enhancements may  
result in different SAR values. SAR values may vary  
depending on national reporting and testing  
requirements and the network band. Additional SAR  
information may be provided under product  
information at www.nokia.com.  
154  
Index  
calendar entries  
creating 33  
Symbols/Numerics  
B
3-D ringing tones 38  
background image 38  
backing up data 117  
barcodes 124  
battery  
viewing 33  
calendar key 32  
calendar views  
changing 32  
security settings 132  
A
call barring 84  
net calls 85  
inserting 17  
creating 130  
call divert 84  
caller ID 129  
blogs 54  
VPN 123  
Bluetooth  
activation keys 120  
Active notes 99  
settings 99  
calls  
authorising devices 107  
pairing 107  
answering 79  
barring net calls 85  
call waiting 129  
caller ID 129  
passcode 107  
receiving data 107  
security 108  
alarm clock 103  
alert tones 126  
altitude calibration 96  
animated screen saver 38  
antennas 19  
conference call 80  
fixed dialling 114  
making 79  
bookmarks 54  
application settings 135  
applications  
making a call from Log 90  
making a net call 83  
muting the ringing tone 79  
net call alert 129  
PTT 88  
intranet 55  
offline 54  
common actions 24  
installing 118  
web 53  
modifying installations 119  
attachments  
C
rejecting 79  
cable 105  
cache  
e-mail 65  
rejecting with text  
message 129  
multimedia messages 70  
sound clips 70  
emptying 54  
Calculator 100  
Calendar  
selecting type 129  
settings 129  
audio files  
details 48  
speed dialling 83  
voice commands 86  
voice dialling 86  
sending 48  
settings 34  
155  
autolock period 128  
 
connectors 14  
contact groups  
Download!  
voice mail 85  
camera  
managing items 55  
capturing images 39  
image settings 41  
playing videos 40  
scenes 39  
adding ringing tones 35  
creating 34  
purchase history 56  
search settings 56  
settings 56  
making conference calls 34  
contacts  
subscriptions 55  
DTMF tones 85  
sequence mode 40  
toolbar 39  
adding 34  
adding ringing tones 35  
searching 34  
E
video clips 40  
video settings 41  
settings 35  
e-mail  
managing 35  
automatic retrieval  
settings 77  
car kit  
contacts key 32  
converting  
remote SIM access 109  
cell broadcast 74  
settings 77  
connecting to mailbox 64  
connection settings 76  
creating folders 66  
deleting 65  
currencies 101  
certificates  
measurements 101  
currency conversions 101  
details 115  
POP or IMAP 64  
replying 65  
settings 116  
D
charging the battery 18  
Clock  
retrieval settings 76  
sending 65  
date  
alarms 103  
settings 127  
decrypting  
setting up 64  
settings 103  
user settings 76  
writing 65  
world clock 103  
connection methods  
Bluetooth 107  
data cable 105  
infrared 106  
device memory and memory  
card 114  
e-mail key 32  
e-mail key settings 128  
EAP  
destination  
setting 96  
plug-in settings 133  
using an EAP plug-in 133  
encrypting  
Device manager 117  
display  
modem 111  
changing the look 38  
indicators 25  
settings 125  
display rotation 15  
settings 125  
device memory and memory  
card 114  
connections  
ending 112  
ending  
GPRS settings 56, 57  
PC connection 58  
WLAN settings 57  
internet connections 54  
network connections 112  
156  
enhancements  
remote SIM access 109  
settings 127  
I
J
IM  
jad files 118  
jar files 118  
application settings 73  
blocking users 72  
groups 72  
equaliser 45  
Java applications 118, 119  
F
K
settings 71  
feeds 54  
starting a conversation 71  
key store 116  
keyguard 16  
keypad  
File manager 100  
files  
adding to contacts 47  
downloading 47  
sending 100  
fixed dialling 114  
free memory 27  
rotating 47  
lock settings 128  
locking 16  
sending 47  
tones 126  
sharing online 45  
zooming 47  
keys 14  
activation keys 120  
shortcuts 126  
WEP keys 132  
indicators 25  
infrared 106  
inserting  
G
Gallery 47  
GPRS  
battery 17  
L
access point settings 56  
advanced access point  
settings 57  
memory card 18  
SIM card 17  
landmarks  
categories 97  
creating 97  
editing 97  
installation log 118  
installing  
settings 130  
applications 118  
internet 53  
receiving 98  
sending 98  
H
ending connections 54  
internet calls 83  
Internet radio  
listening 51  
headset  
language  
connecting 19  
changing 29  
settings 126  
lock code 113, 128  
locking  
home key 31  
home screen 30  
settings 37, 126  
switching 31  
saving stations 51  
searching 51  
settings 52  
device 113  
HSDPA (high-speed downlink  
packet access) 105  
device autolock 128  
keypad 16, 128  
intranet  
browsing 55  
157  
Log 89  
locking 113  
transferring music 44  
Music Store 44  
adding numbers to  
microSD 27  
Contacts 89  
passwords 113  
setting password 28, 100  
unlocking 28  
N
deleting 89  
making a call 90  
sending messages 90  
settings 90  
net calls 83  
menu 23  
alert settings 129  
barring 85  
message reader 61  
selecting voice 61  
messages 60  
transfer log 24  
connecting 82  
making a call 83  
profiles 82, 134  
settings 134  
logos  
welcome logo 125  
other settings 77  
sending sound clips 70  
service messages 73  
text message settings 74  
Messaging  
M
settings 129  
mailboxes  
Nokia PC Suite 105  
Notes 104  
connecting 64  
notification light 126  
creating 64  
making a call 79  
Maps 92, 93  
folders 60, 61  
O
microSDHC 27  
browsing 93  
One-touch keys 127  
operator  
modem 58, 111  
multimedia messages  
attachments 70  
driving 95  
finding locations 94  
routes 94  
logo 126  
selecting 129  
original settings 128  
forwarding 70  
walking 94  
packet data  
measurements  
converting 101  
measuring system  
changing 96  
access point settings 56  
advanced access point  
settings 57  
sending 68  
sending options 70  
settings 75  
restricting 135  
settings 130  
multitasking 35  
Music player  
memory 27  
memory card  
pairing  
Music Store 44  
backing up data 117  
formatting 28  
inserting 18  
devices 107  
playing 43  
158  
passcode 107  
playlists 44  
passwords  
PTT  
ringing tones 126  
3-D 38  
memory card password 28,  
contacts 88  
100  
created calls 88  
creating a channel 89  
exiting 89  
contacts and contact  
groups 35  
PC Suite 105  
PDF reader 102  
personalisation 38  
changing language 126  
display 125  
in profiles 36  
vibrating alert 126  
logging in 88  
making a call 88  
settings 88  
S
home screen 126  
tones 126  
satellite signal strength 96  
saving  
Q
picture messages  
viewing 67  
Quickoffice 101  
current position 96  
files 24  
R
settings 24  
PIN code  
screen saver 38, 125  
scroll key lights 16  
search modes  
radio  
changing 128  
playing  
listening to 49  
saved stations 50  
settings 50  
messages 61  
switching 34  
recordings 46  
video and audio 48  
podcasting 41  
directories 42  
searching 42  
searching  
viewing visual content 50  
RealPlayer  
available WLANs 112  
security  
playing media clips 48  
sending files 48  
Bluetooth 108  
device and SIM card 128  
Java application 119  
memory card 113  
security module 116  
sending  
settings 49  
settings 43  
viewing clip details 48  
recorder  
settings 92  
predictive text input 28, 126  
printer settings 103  
printing 102  
profiles  
files 24, 100  
using Bluetooth 107  
videos 81  
recording  
sound clips 46  
service commands 74  
service messages 73  
settings 77  
remote configuration 117  
remote lock 113  
remote synchronisation 121  
restoring original settings 128  
creating 36  
customising 36, 37  
net call profile 82, 134  
selecting ringing tones 36  
session initiation protocol  
See SIP  
159  
settings  
printer 103  
PTT 88  
settings 133  
sis files 118  
Active notes 99  
sisx files 118  
advanced WLAN 131  
application installations 119  
applications 135  
Calendar 34  
radio 50  
slide  
RealPlayer 49  
recorder 46  
opening and closing 16  
settings 127  
restoring 128  
service messages 77  
SIP 133  
software packages  
installation settings 119  
installing 118  
calls 129  
camera 41  
certificate 116  
clock 103  
slide 127  
sound clips  
time 127  
recording 46  
contacts 35  
tones 126  
sending 70  
Speech 61  
date 127  
voice commands 87  
web 54  
speed dialling 83  
standby mode  
display 125  
Download! application 56  
e-mail connection 76  
e-mail key 128  
e-mail retrieval 77  
e-mail user 76  
EAP plug-ins 133  
enhancements 127  
GPRS 56, 57, 130  
home screen 126  
IM 71  
WEP security 131  
WLAN 131  
settings 126  
switching device on and off 21  
Symbian applications 118  
synchronisation 24  
settings 122  
WLAN access point 57, 58  
WLAN security 131  
Settings wizard 22  
shortcuts 136  
keys 126  
synchronisation profiles 121  
synchronising  
signal strength 25  
silencing  
applications 122  
alarms and incoming calls 15,  
language 126  
tabs 24  
text  
changing size 125  
letter mode 28  
number mode 28  
predictive input 28  
traditional input 28  
text messages  
messages on SIM card 67  
sending 66  
Log 90  
SIP  
multimedia messages 75  
net call 134  
creating profiles 133  
editing profiles 133  
editing proxy servers 134  
editing registration  
servers 134  
network 129  
packet data 130  
podcasting 43  
positioning 92  
160  
wireless keyboard 104  
WLAN  
sending options 66  
settings 74  
playing 48  
sending 48  
video sharing 81  
receiving invitations 81  
virtual private network  
access points 123  
Voice aid 85  
writing 66  
802.1x security settings 132  
access point settings 57  
access points 110  
themes  
changing 38  
downloading 38  
advanced access point  
settings 58  
time  
settings 127  
tones 126  
settings 126  
advanced settings 131  
availability 110  
voice commands  
launching an application 87  
settings 87  
MAC address 110, 131  
searching for networks 112  
security settings 131  
settings 131  
toolbar  
camera 39  
traditional text input 28  
Transfer  
voice mail  
calling 85  
WEP keys 132  
log 24  
changing number 85  
voice over IP 83  
VoIP 83  
WPA security settings 132  
WLAN wizard 110  
world clock 103  
transferring data 24  
trip destination 96  
trip meter 96  
volume 27  
WPA security settings 132  
writing language 29  
troubleshooting 142  
VPN  
access points 123  
use in applications 123  
U
Z
UPIN code  
Zip manager 101  
W
changing 128  
USB data cable 105  
warning tones 126  
Web  
V
connection security 53  
web  
vibrating alert 126  
video  
settings 54  
playing 40  
weblogs 54  
Welcome application 21  
welcome note 125  
WEP  
video calls  
making a call 80  
switching to voice call 80  
video clips  
161  
keys 132  
details 48  
security settings 131  

Sun Microsystems Sun Management Center 35 User Manual
Sony D E770 User Manual
Sonic Blue Rio EX1000 User Manual
Silvercrest KH 2420 User Manual
Sherwood LAD 500 User Manual
Seagate ST3500071FC User Manual
Seagate MEDALIST 1276 (ST31276A) User Manual
Seagate Barracuda ST3160828AS User Manual
Sagem myX3 2 User Manual
Oregon Scientific RM836A User Manual