Nokia 6188 User Manual

Keys

Fixed

(Power key)

Press and hold to turn your phone on

or off.

antenna

Do not

attempt to

extend or

remove!

Earpiece

Press the scroll

keys up or down

during a call to

adjust the lis-

tening volume.

(Softkeys)

Their current

function is dis-

played above

the key; these

labels change

whenaccessing

the various

(Scroll keys)

Scroll through

menus, sub-

menus, and the

phone book.

Press and hold

for continuous

scrolling.

phone features.

Names

Push this key to

end a phone

call or to return

to the start

screen.

Use this key to

dial and answer

phone calls.

Press to select

upper or lower

case letters

when editing

text. Press and

hold while

Press this key to

select special

characters when

entering text and

numbers.

displayed to

enter numbers

rather than

letters.

Use this key to enter an empty

space between letters when

entering text.

Indicators and Icons

You have an active call.

The phone is waiting for you to enter numbers or text.

You have turned off your phone’s keypad tones,

warning tones, message alert tones, and set your

ringing tone to Silent.

Keyguard has been activated to help prevent any

accidental keypresses.

You have one or more voice messages waiting.

You have one or more unread text messages waiting.

Digital service is available.

Your phone is roaming outside of your home area.

Any characters you enter will be upper-case letters or

numbers. Press the # key to switch letter case.

Any characters you enter will be lower-case letters or

numbers. Press the # key to switch letter case.

Appears when you press and hold the # key while

editing text. Only numbers can be entered while in

this mode.

The alarm clock is set.

Your phone is ready to place or receive a data call.

(If available through your service provider.)

You have a reminder in your calendar to do something

(appears only on Calendar display).

You have a reminder in your calendar that it’s

someone’s birthday (appears only on Calendar

display).

You have a reminder in your calendar to call someone

(appears only on Calendar display).

You have a reminder in your calendar of a meeting

(appears only on Calendar display).

Table of Contents

1. Safety At A Glance . . . . . . . . . . . . . . . . . . . 1

2. Getting Connected . . . . . . . . . . . . . . . . . . . 3

Attaching your battery . . . . . . . . . . . . . . . . . . . . . . . . . 3

Charging your new battery . . . . . . . . . . . . . . . . . . . . . . 3

When is a good time to charge?. . . . . . . . . . . . . . . . 4

When is charging complete?. . . . . . . . . . . . . . . . . . . 4

Discharging NiMH batteries . . . . . . . . . . . . . . . . . . . 5

Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Important Battery Information . . . . . . . . . . . . . . . . . . . 6

Cool Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3. Using Your Phone . . . . . . . . . . . . . . . . . . . . 8

What is the ‘start screen’?. . . . . . . . . . . . . . . . . . . . . . . 8

Navigating tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Scrolling through the main menu. . . . . . . . . . . . . . . . . 9

Menu and submenu numbering . . . . . . . . . . . . . . . . . 10

Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Help Text. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Summary of Menu Items. . . . . . . . . . . . . . . . . . . . . . . 11

4. The Basics . . . . . . . . . . . . . . . . . . . . . . . . . 13

Switching the phone on and off. . . . . . . . . . . . . . . . . 13

Getting a strong signal . . . . . . . . . . . . . . . . . . . . . . . . 13

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Ending a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Answering a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5. Your Phone A to Z. . . . . . . . . . . . . . . . . . . 17

ABC/abc mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Access codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Alarm clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

All calls timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Automatic answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Automatic redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Call forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Call restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Call settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Clear call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Clear timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Conference call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Current call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Custom Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Assigning a custom ringing tone to a name

and number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Removing a name and number from the list . . . . . 32

Data and fax calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Dialed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Earpiece volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Emergency calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Entering text and numbers. . . . . . . . . . . . . . . . . . . . . .35

Fax calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

In-call menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Keypad tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Last number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Life timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Listen to voice messages . . . . . . . . . . . . . . . . . . . . . . .42

Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Changing your lock code . . . . . . . . . . . . . . . . . . . . . 43

Manual touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Memory status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Message alert tone . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

NAM selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

NAM update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Network feature setting . . . . . . . . . . . . . . . . . . . . . . . 46

Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

One-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Phone book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Accessing the phone book. . . . . . . . . . . . . . . . . . . . 49

Storing a name and number . . . . . . . . . . . . . . . . . . 50

Changing a number stored with a name . . . . . . . . 50

Recalling names and numbers . . . . . . . . . . . . . . . . 50

Recalling numbers by name . . . . . . . . . . . . . . . . . . 51

Erasing stored names and numbers . . . . . . . . . . . . 51

Erasing your entire phone book . . . . . . . . . . . . . . . 51

Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Customizing profiles and other options . . . . . . . . . 53

Renaming profiles . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Restore factory settings. . . . . . . . . . . . . . . . . . . . . . . . 55

Restrict calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Restricting incoming and outgoing calls . . . . . . . . 55

Adding outgoing and incoming call restrictions . . 56

Ringing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Ringing tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Ringing volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Roaming Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Saved. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Scrolling view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Security code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Changing your security code. . . . . . . . . . . . . . . . . . 60

Security settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Send own caller ID with next call. . . . . . . . . . . . . . . . 61

Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Storing a name and number . . . . . . . . . . . . . . . . . . . . 61

Quick save. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

System Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Text messages and paging . . . . . . . . . . . . . . . . . . . . . 62

Reading text messages . . . . . . . . . . . . . . . . . . . . . . 63

Erasing a text message . . . . . . . . . . . . . . . . . . . . . . 64

iii

Erasing all text messages . . . . . . . . . . . . . . . . . . . . .64

Receiving a page . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Touch tone length . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Storing touch tone strings . . . . . . . . . . . . . . . . . . . .66

Sending a touch tone string. . . . . . . . . . . . . . . . . . . 66

Unlocked phone number. . . . . . . . . . . . . . . . . . . . . . . .67

Vibrating alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Setting up your voice mailbox . . . . . . . . . . . . . . . . .69

Greetings, passwords, and prompts . . . . . . . . . . . . . 69

Listening to your voice messages. . . . . . . . . . . . . . .70

Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Earpiece volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Ringing volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Warning and game tones . . . . . . . . . . . . . . . . . . . . . . .71

Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

6. Accessories. . . . . . . . . . . . . . . . . . . . . . . . . 72

Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Charging Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Standby and Talk Times . . . . . . . . . . . . . . . . . . . . . . 73

Chargers and Other Accessories. . . . . . . . . . . . . . . . . .74

7. Troubleshooting . . . . . . . . . . . . . . . . . . . . . 76

8. Reference Information . . . . . . . . . . . . . . . . 77

9. Technical Data . . . . . . . . . . . . . . . . . . . . . . 82

10. Nokia 1-Year Limited Warranty . . . . . . . . . 83

11. Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

1. Safety At A Glance

Read these simple guidelines before using your

phone. Failure to comply with these guidelines may

be dangerous or illegal.

For more detailed safety information, “Important

Safety Information” on page 77.

Road Safety Comes First

Don’t use a hand-held phone while driving; park the

vehicle first.

Switch Off In Hospitals

Switch off your phone when near medical

equipment. Follow any regulations or rules in force.

Switch Off On Aircraft

Mobile phones can cause interference. Using them

on aircraft is illegal.

Switch Off When Refueling

Do not use the phone at a refueling point. Do not use

near fuels or chemicals.

Switch Off Near Blasting

Do not use the phone where blasting is in progress.

Observe restrictions, and follow any regulations or

rules in force.

Interference

All mobile phones may get interference which could

affect performance.

Use Sensibly

Use only in the normal position (to ear). Avoid

unnecessary contact with the antenna when phone

is on.

Qualified Service

Only qualified service personnel may install or repair

wireless phone equipment.

Accessories and Batteries

Use only approved accessories and batteries. Do not

connect incompatible products.

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (e.g. when using a

telephone in close proximity to receiving equipment). The FCC/

Industry Canada can require you to stop using your telephone if

such interference cannot be eliminated. If you require assistance,

contact your local service facility.

This device complies with part 15 of the FCC rules. Operation is

subject to the condition that this device does not cause harmful

interference.

Using this Guide

The wireless phone described in this guide is approved for use in

CDMA/AMPS networks.

A number of features included in this guide are called Network

Services. They are special services provided by wireless service

providers. Before you can take advantage of any of these Network

Services, you must request them from your home service provider

and obtain instructions for their use if they are available.

Disclaimer

It’s possible that you may not be able to activate your phone on

all wireless systems. Please see your service provider for details.

2. Getting Connected

This section will help you understand the ins and outs of

charging and using your battery.

Attaching your battery

Simply place the battery

in the grooves on the

back of your phone. Then

slide the battery upward

until it clicks.

Note: Use only those

batteries approved by the

phone manufacturer and

recharge your battery only

with the chargers approved

by the manufacturer.

See “Important Battery Information” on page 6.

Charging your new battery

Your phone can be used with either a rechargeable Li-Ion

or NiMH battery. Note that a new battery’s full

performance is achieved only after two or three complete

charge and discharge cycles.

With your phone powered

on or off, connect the lead

from the charger to the

bottom of your phone.

You can also place your

phone on the charging

stand (with the stand

connected to a standard

120V AC outlet via either the ACP-7U or ACP-9U AC/DC

adaptors).

When the battery begins charging, your phone will beep

once and the battery strength indicator on the right side

of the display will begin to scroll after a few seconds.

If your phone displays Not charging, charging is suspended.

Check that the battery is connected only to an approved

charging device. If the battery is very hot or cold, wait for a

while; charging will automatically resume after the battery

is restored to its normal operating temperature. If charging

still fails, contact your service provider or retailer.

When a charger is not in use, disconnect it from the power

source. Do not leave the battery connected to a charger for

longer than a week, since overcharging may shorten its life.

Important: If left unused, a fully charged battery will

discharge itself over time.

When is a good time to charge?

Actually, you can charge anytime. If you have a NiMH

battery, you should allow it to completely discharge once

in a while.

When your phone beeps once and displays Battery low,

you only have a couple of minutes of talk time remaining.

The repetition rate of these battery-low warnings depend

on the remaining battery capacity and the battery

condition. These warnings are more frequent when you’re

in a call.

Note: The phone will not give you the warning tone under certain

conditions. See “Warning and game tones” on page 71.

Once all the power has drained from your battery, you’ll

hear three beeps with the message Recharge battery on

your display. At this point, your phone will switch itself

off and you’ll need to recharge your battery.

When is charging complete?

When the charge indicators stop scrolling, your

phone is considered fully charged. However, a

slight increase in charge may occur if your phone

is left connected to the charger for a couple more

hours. This is called “trickle charge” or

“maintenance charge.” If your phone is powered

off the display will clear when charging is complete.

Charging times depend on the type of battery and

charger used.

For approximate charging and operating times, see “Batteries” on

page 72.

Can you make calls while charging?

Yes, you can. But your battery may not charge while a call

is in progress (depending on which charger you are

using). Charging should resume once you end the call.

See "Chargers and Other Accessories" on page 74 for more

information.

Discharging NiMH batteries

A NiMH battery lasts longer and performs better if you

fully discharge it from time to time. To discharge the

battery, leave your phone switched on until the battery is

drained. The phone will display several messages that the

battery is low and that you need to recharge it; just

ignore them.

Do not attempt to discharge the battery by any other

means.

Removing the battery

Note: Switch off the phone before removing the

battery!

1. Press and hold the

button at the top

of the battery.

2. Slide the battery

toward the bot-

tom of the phone.

3. Lift the battery off

the phone.

Important Battery Information

•

The battery can be charged and discharged hundreds of

times but it will eventually wear out. When the operating

time (talk time and standby time) is noticeably shorter

than normal, it is time to buy a new battery.

•

Use only batteries approved by the phone manufacturer

and recharge your battery only with the chargers

approved by the manufacturer. When a charger is not in

use, disconnect it from the power source. Do not leave the

battery connected to a charger for longer than a week,

since overcharging may shorten its life. If left unused a

fully charged battery will discharge itself over time.

•

(NiMH batteries only) For optimal operation, discharge the

battery from time to time by leaving your phone switched

on until it turns itself off. You can also use the battery

discharge feature of any approved accessory available for

your phone. Do not attempt to discharge the battery by

any other means.

Temperature extremes will affect the ability of your

battery to charge: allow it to cool down or warm up first.

•

Use the battery only for its intended purpose.

Never use any charger or battery which is damaged or

worn out.

•

Do not short circuit the battery. Accidental short

circuiting can occur when a metallic object (coin, clip, or

pen) causes direct connection of the + and - terminals of

the battery (metal strips on the back of the battery), for

example when you carry a spare battery in your pocket or

purse. Short circuiting the terminals may damage the

battery or the connecting object.

Leaving the battery in hot or cold places, such as in a

closed car in summer or winter conditions, will reduce the

capacity and lifetime of the battery. Always try to keep

the battery between 59º F and 77º F (15º C and 25º C). A

phone with a hot or cold battery may temporarily not

work, even when the battery is fully charged. NiMH

batteries’ performance is particularly limited in

temperatures below 14º F (-10º C). Li-Ion batteries’

performance is particularly limited in temperatures below

32º F (0º C).

•

Do not dispose of batteries in a fire!

Dispose of used batteries in accordance with any local

regulations.

Cool Features

Did you know that you can lock the keys on your phone

to prevent accidental key presses and phone calls? Or

that you can call someone with the touch of a single

button? You can also stop your phone from ringing

without even answering the call.

These are just some of the many Cool Features you’ll find

in your phone. Look for the

owner’s manual to find them.

icon throughout this

3. Using Your Phone

The first few days you have your phone, play with it to

learn how the menu and submenu system works. The

more you learn how to access these menus and

submenus, the more fun you’ll have with your phone.

This section describes the different methods of using your

phone menus and submenus.

What is the ‘start screen’?

The start screen appears when you first turn your phone

on, in its idle state.

Anytime you want to get to the start screen, press

except during a call (unless you want to hang up).

CAUTION: If you press

when the phone is

requesting input (for example, a setting, phone number,

name, etc.), the phone displays the start screen, the input

is not saved, and the option is not selected.

Navigating tools

Softkeys

Your phone has two softkeys that

appear below the display. Their

current function is indicated by the

words appearing above them.

Simply press the corresponding key

under the choice you wish to select.

This illustration shows the phone at the start screen. The

start screen always displays Menu on the left and Names

on the right. Menu allows you to access your phone’s

menus and submenus. Names allows you to access your

phone book.

See “Using Shortcuts” on page 10 and “Phone book” on page 49.

Scroll key

Your phone has scroll keys located just below your

display. It has two arrows on it that look like ^Vand ^W.

Press the scroll key up or down to navigate through your

phone’s menus and submenus. You can also use it to

scroll through names and numbers in your phone book.

Also, when editing names and numbers (e.g. numbers in

your phone book), you may notice a cursor flashing

within the name or number. Pressing the scroll key up or

down moves the cursor within the text, allowing you to

insert letters, numbers, or special characters via the

keypad.

See “Entering text and numbers” on page 35 for more details.

Scroll bar

When you access your phone’s menu and

submenus, you will notice a scroll bar at the far

right of the screen. This bar indicates where you

are in the menu structure; each “tab” on the bar

represents a different menu item.

For example, press Menu once. The scroll bar appears

with the first (top) tab displayed. A different tab appears

each time you press the ^Wor ^Vkey to move up and down

through the menu structure. The scroll bar works the

same way with submenus.

Scrolling through the main menu

Press Menu at the start screen. Then press ^Wor ^Vto

reach the desired menu item.

Press Select, Options or OK (whichever appears) to enter

submenus and to choose options.

Press Exit to exit the present menu or Back to go back

one level.

Menu and submenu numbering

When you scroll to a menu or submenu, the menu

number and/or submenu number appears on the display

above the scroll bar. If you become familiar with these

numbers, you can use them as shortcuts for accessing

different menus.

For example, when you scroll to Menu 2 (Call log) the

number 2 appears in the top right-hand corner of the

display. If you scroll to menu 4 (Settings), submenu 3

(Security settings), your phone will display 4-3 in the

top right-hand corner.

See “Summary of Menu Items” on page 11 for a list of your phone’s

features along with their menu locations.

Also, see “Using Shortcuts” on page 10.

Using Shortcuts

Now that you know about shortcuts, use them as a quick

and easy way to access a menu without having to scroll

through other menus.

Press Menu, then menu number, then submenu number.

For example, press Menu, then 2, then 3 to access the

dialed calls feature (Menu 2-3).

Press the menu and submenu numbers within a couple of

seconds of each other when using this method.

For a summary of your phone’s menu structure, see “Summary of

Menu Items” on page 11.

Help Text

If you’re not sure how a feature works, wait just a few

seconds and help text will automatically appear for most

of your phone’s features. Press More to see the next page

of the text or Back to exit the help text. After a while, the

help text will disappear by itself.

Summary of Menu Items

01 Messages

01 1 Text messages

01 1 1 Inbox

01 1 2 Saved

01 1 3 Erase all

01 2 Voice messages

01 2 1 Listen to voice messages

01 2 2 Voice mailbox number

013 Welcome note

2 Call log

2 1 Missed calls

2 2 Received calls

2 3 Dialed calls

2 4 Clear call lists

2 4 1 All

2 4 2 Missed

2 4 3 Received

2 4 4 Dialed

25 Call timers

2 5 1 Last call

2 5 2 All calls

2 5 3 Life timer

2 5 4 Clear timers

3 Profiles

3 1 Normal (the following options appear in all profiles)

3 1 1 Select

3 1 2 Customize

3 1 2 1 Ringing options

3 1 2 2 Ringing volume

3 1 2 3 Ringing tone

3 1 2 4 Vibrating alert

3 1 2 5 Keypad tones

3 1 2 6 Warning and game tones

3 1 2 7 Message alert tone

3 1 2 8 Lights (appears only in Car)

3 1 2 9 Automatic answer

(appears only in Car and Headset)

3 1 3 Rename (not available in Normal, Car, or Headset)

3 2 Silent

3 3 Meeting

3 4 Outdoor

3 5 Pager

3 6 Car (appears only after phone is connected to a car kit once)

3 7 Headset (appears only after connected to a headset once)

4 Settings

4 1 Call settings

4 1 1 Emergency key 9

4 1 2 Automatic redial

4 1 3 Calling card

4 2 Phone settings

4 2 1 Clock

4 2 2 Alarm clock

4 2 3 Touch tones

4 2 4 Restore factory settings

4 2 5 Language

4 3 Security settings

4 3 1 Restrict calls

4 3 2 Access codes

4 4 Network services

4 4 1 Call forwarding ó

4 4 2 Call waiting ó

4 4 3 Send own caller ID with next call ó

4 4 4 Network feature setting

4 4 5 NAM selection

4 4 6 NAM update (not available in some systems)

óýThese items will not appear in your phone until they are

activated with Network feature setting. See “Network

feature setting” on page 46 for details.

5 System

5 1 Automatic

5 2 Home area

6 Games

6 1 Memory

6 2 Snake

6 3 Logic

6 4 Dice

7 Calculator

8 Calendar

9 Keyguard

4. The Basics

You have purchased a powerful phone, with lots of

features. Read this section for some very basic

information on how to use your phone.

A more comprehensive description of your phone is

covered in “Your Phone A to Z” starting on page 17.

Switching the phone on and off

Press and hold the key for two seconds to switch the

phone on or off.

Switching off with the key

Quickly press the key (Switch off! will appear,

highlighted) then press OK.

TIPS ON EFFICIENT OPERATION: As with any other radio

transmitting device, do not touch theantenna unnecessarily when

the phone is switched on. Contact with the antenna affects call

quality andmaycausethephonetooperateat a higherpowerlevel

than otherwise needed.

WARNING! Do not switch on the phone when wirelessphone use is

prohibited or when it may cause interference or danger.

See “Safety At A Glance” on page 1 for more information.

Getting a strong signal

Your phone operates on radio waves, and the quality of

radio reception depends on the strength of the radio

signal in your area. This radio coverage is maintained by

a wireless network and the quality of calls on a wireless

phone depends on the strength of the wireless radio

signal.

If your phone does not detect service at power up, the

message Searching for service will be displayed. The

phone will continue to search for available service for 15

minutes, at which time it will display No service if none

is found.

If your phone is powered on and service is lost, the

message Wait for service will be displayed along with a

scrolling bar. The phone will continue to search for

available service for 15 minutes at which time it will

display No service if none is found.

Note: The phone will not work in analog mode while searching for

digital service.

Checking signal strength

When at the start screen (see page 10) or in a

call, the strength of the radio signal is

indicated by the signal indicators on the left

side of your phone’s display. These indicators

will move up as the strength of the signal

increases and down as it decreases.

Increasing your phone’s signal may be easy. Try moving

your phone slightly, or move towards a window if you’re

calling from inside a building.

Making a call

Your wireless phone does not have a dial tone. Simply

enter the phone number (including area code, as needed)

and press

NORMAL POSITION: Hold the phone as you would any other

telephone with the antenna pointed up and over your shoulder.

Editing a number on display

If you make a mistake while entering a number to dial,

press ^Vto move the cursor to the left and ^Wto move it

to the right. Press Clear to delete the character to the left

of the cursor.

Dialing a phone number stored in the phone book

View stored names and numbers by pressing ^Wor ^Vfrom

the start screen (see page 8), then press

Calling card calls

See “Calling card” on page 26.

Emergency calls

See “Emergency calls” on page 33.

Ending a call

Press

Answering a call

Press any key except

Note: If Keyguard is on (see next

paragraph), only

calls.

answers

Tip: You can stop your phone from ringing without

answering the call. Press

mute the ringing.

when the phone rings to

You can still answer the call if Call or the name of the

person who is calling is still flashing on your display.

If you don't wish to answer the call, it will be forwarded

to your voice mailbox (provided you have a voice mail

subscription).

Keyguard

This feature helps to prevent

accidental key presses (e.g. when

your phone is in your pocket or in

your purse) by disabling your

keypad.

If any keys are pressed while Keyguard is activated, Press

Unlock and then * will display.

Activating Keyguard

There are three different ways to activate Keyguard. Keys

locked will appear on the display when activated.

•

Press and hold

(not available during an active call)

until Keys locked appears

•

Press Menu

Press Menu 9 at the start screen

Deactivating Keyguard

There are two different ways to deactivate Keyguard.

•

Press Unlock, then

Press and hold

press OK within 1 second

until Unlock keys? appears, then

Answering a call with Keyguard active

Only the

key will answer the call. After you end the

call, Keyguard automatically becomes active again.

Some notes about Keyguard

•

Calls may be possible to the emergency number programmed

into your phone (e.g. 911 or other official emergency num-

ber). The number is displayed only after you have keyed in its

last digit. Press

) to initiate the call.

•

The Emergency key 9 will not work with Keyguard enabled.

You must deactivate Keyguard prior to turning off your

phone.

•

Pressing the

key quickly turns lights on for 15 seconds.

Keyguard is automatically turned off when the phone is con-

nected to a car kit. Keyguard is automatically re-enabled

when removed from a car kit.

5. Your Phone A to Z

ABC/abc mode

This allows you to enter upper and lower case alphanumeric

characters into your phone. This is necessary for entering

names and numbers into your phone book, as well as

editing any existing alphanumeric characters.

See “Entering text and numbers” on page 35 for more information.

Access codes

This is a security feature that allows you access to certain

phone features.

See “Lock code” on page 43 and “Security code” on page 60.

Alarm clock

The alarm clock uses your phone’s

clock and can be set in advance to

sound an alert at a designated time.

You can also turn your phone off

after you’ve set the alarm. Your phone will automatically

wake up and sound the alarm at the specified time.

The volume for the alarm clock is determined by the

current ringing volume.

Note: If you have selected the Silent or Meeting profile, your alarm

will only beep once. The best profile to use while using the alarm

clock is Normal or Outdoor, unless these have been modified from

their original settings or renamed.

For more information on profiles, see page 53. Also, see “Clock” on

page 29 for information on your phone’s clock.

Setting the alarm clock

1. Press Menu 4-2-2 (Settings - Phone settings -

Alarm clock)

2. Enter time you wish to set alarm (e.g. enter 07:00 to

set the alarm to 7:00; remember if your clock is

24-hour or am/pm). Existing digits will be replaced

with the new alarm time.

3. Press OK

Note: Step 4 appears only if you have selected am/pm format;

see “Selecting time format” on page 29 for more information.

4. Select either am or pm and press OK

When the alarm goes off

Press Stop to shut off the alarm.

Snoozing

Press Snooze

The alarm will go off again in 10 minutes. If you let the

phone’s alarm sound for 1 minute without pressing a key,

it stops sounding for 10 minutes then starts again.

If you turn off the phone

If you turn off the phone and the alarm is set, the phone

switches itself on at alarm time, then the alarm sounds.

To shut off the alarm, press any key except Snooze.

The phone displays Keep the phone on? Press Yes

to keep it on or No to switch it off.

Note: If youdo not makea selection after 1minute, thephone

will automatically shut itself off.

If you press Snooze, the phone turns itself off for 10

minutes, then back on to sound the alarm.

REMEMBER! Do not switch on the phone when wireless phone use

is prohibited, or when it may cause interference or danger.

Turning the alarm clock off

Press Menu 4-2-2 (Settings - Phone settings - Alarm

clock), then scroll to Off and press OK.

All calls timer

This feature keeps track of the approximate time you

have spent on all calls with your phone.

See “Call timers” on page 25.

Automatic answer

This is a setting found in your phone’s profile settings,

under the Car and Headset profiles (see page 53). When

this feature is turned on, your phone answers incoming

voice calls after one ring.

Note: Car and Headset profiles will not appear in your phone

until you have connected an approved handsfree car kit or a

headset to your phone at least once.

Activating automatic answer

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^ýWto highlight

either the Car or Headset profile and press Options.

Note: Car and Headset will not appear in the list unless the

phone has already been connected to a car kit or headset.

3. Highlight Customize and press OK. Scroll to

Automatic answer, then press Select again.

4. Press ^Wto On and press OK.

Note: This feature will not function with data calls.

Automatic redial

Your phone will redial the number you’re trying to call up

to 3 times after you hear a fast, busy signal. Press

to stop the call attempts. It will not redial numbers to a

busy party.

Activating automatic redial

Press Menu 4-1-2 (Settings - Call settings - Automatic

redial), then press ^Wor ^Vto On and press OK

Calculator

Your phone’s calculator adds,

subtracts, multiplies, and divides.

Remember! Your phone must be switched

on to use this feature. Do not switch on

the phone when wireless phone use is

prohibited or when it may cause interference or danger.

Using the calculator

1. Press Menu 7 (Calculator)

2. With the screen that contains a “0”, enter the first

number in the calculation (press # for decimal point)

3. To add, press ∗ (+ appears)

To subtract, press ∗∗ (ð appears)

To multiply, press ∗∗∗ (ó appears)

To divide, press ∗∗∗∗ ( / appears)

To insert a decimal, press the # key

4. Enter the second number

Repeat these steps as needed. If you need to erase any

mistakes, press Clear to clear one number at a time.

5. Press Options. With Equals#highlighted/#press OK

Note: You can also choose Add, Subtract, Multiply, and

Divide from the list of options.

Calendar

The calendar helps you keep track

of appointments, birthdays or

meetings. It can even sound an

alarm when it’s time for you to

make a call or go to a meeting.

Remember! Your phone must be switched on to use this feature.

Do not switch on the phone when wireless phone use is prohibited

or when it may cause interference or danger.

Note: Your phone must remain on to use the calendar’s alarm

feature. If your phone is off, the alarm will not sound at its

scheduled time.

Using the calendar

1. Press Menu 8 (Calendar)

2. If you are not in a digital service area, you will be

prompted to set your phone’s time and date

When your phone prompts you for the time with

hh:mm, enter the time in hours and minutes

(using two-digit fields), then press OK

Time format (24-hour or am/pm) is set using the Clock.

See “Clock” on page 29.

When your phone prompts you for the date with

mm/dd/yyyy, enter the month and day (using two-

digit fields) and year (using a four-digit field), then

press OK.

Tip: Use ^Wto move the cursor right and ^Vto move it left.

When you enter a digit, it writes over the number to the

right of the cursor.

3. Your phone now displays the current day. You can

also scroll to different days by pressing ^Wor ^V.

4. Once you’re at the date you want, press Options.

Then use ^Wýto highlight the option you want, and

press Select. The options are:

Option 1: View day

With this option, you can view the notes of the day

currently on display.

Use ^Wto scroll through the notes. Each note allows you

to choose the following Options:

Erase clears the note from your calendar.#

Edit gives you the same prompts you got when you made

the note.

Move gives you the date prompt so you can move the

note to another date.

Option 2: Make note

With this option, you’ll need to choose Reminder, Call,

Meeting, or Birthday. Your phone will prompt you for

more information depending on which one you choose.

You can also set an alarm for any calendar note.

See “Entering text and numbers”on page 35 for help with entering

information at the Subject: prompt.

Note: When the alarm goes off, you can press Postpone or OK.

Press OK to shut off the alarm.

Option 3: Erase notes

With this option, you’ll need to choose which notes to

erase. If you choose all the notes for the day currently on

display (Of chosen day), or One by one (for all notes in

the calendar), your phone presents each note to you with

the option Erase or Back.

If you choose All at once, your phone will delete all cal-

endar notes. When prompted to confirm the erase, press

Yes or No.

Option 4: View all

This allows you to view the notes of the entire calendar.

Use ^Wor ^Vto scroll through the notes. Calendar

memory empty will appear if there are no notes in the

calendar.

Option 5: Go to date

Enter the date you wish to go to.

Option 6: Set the date

Enter the day and month (using two-digit fields) and year

(using a four-digit field), then press OK.

Call forwarding

This network service is used to forward incoming calls to

another number so you won’t miss an important call.

Check with your service provider for details.

Note: Before you can activate this feature, you should first store

the feature code given to you by your service provider. Otherwise,

this feature may not appear in the menu or function properly.

However, you can use the feature code manually, if you choose, by

including the feature code in front of the phone number to which

you wish to forward your calls (e.g. ó72 416 555 1212).

See “Network feature setting” on page 46 for more details.

Note: If the code you store is not correct, the Call fowarding

feature will not work.

1. Press Menu 4-4-1 (Settings - Network services -

Call forwarding)

2. Scroll to desired call forwarding feature

(see options below)

3. Press Select

4. Highlight Activate and press OK

5. Enter phone number at Number: (or press Search to

locate number in phone book) and press OK

6. Your phone will attempt to call the network to

confirm the feature code you entered in Menu 4-4-4

(see “Network feature setting” on page 46)

7. Once the feature code had been confirmed, the

feature is activated

Call forwarding options

This feature may not be available in all wireless networks.

Contact your service provider for details and availability.

Forward all calls forwards all incoming calls.

Forward if busy forwards calls only when you’re on the

phone.

Forward if not answered forwards calls if you don’t

answer.

Forward if out of reach forwards calls if you are out of

the serving wireless network.

Cancel all call forwarding cancels all call forwarding

options you have made active.

Call log

This feature automatically keeps

track of numbers you’ve dialed,

numbers that have called you, and

the amount of time you’ve spent on

calls.

Using call log

1. Press Menu 2 (Call log)

2. Pressý^Wto reach one of the following options, then

press Select or OK

2-1 Missed calls - See page 45.

2-2 Received calls - See page 54.

2-3 Dialed calls#- See page 33.

2-4#Clear call lists - See page 28.

2-5 Call timers - See page 25.

Tip: You can dial any of the phone numbers by pressing

while the number is on the display.

Call log options

When you access Dialed calls, Received calls, or Missed

calls and press Options, a list of options will appear.

Call time shows the date and time when the call was first

connected (if clock has been set)

Use number allows you to view the number stored in the

call log, save it in your phone book, or dial the number by

pressing

Save allows you to save the number into your phone book.

Erase will erase the number from the call list.

Call restrictions

This feature allows you to restrict incoming and outgoing

calls to and from certain numbers.

See “Restrict calls” on page 55 for details.

Call settings

This feature allows you to access and activate some of

your phone’s features.

Using call settings

1. Press Menu 4-1 (Settings - Call settings)

2. Pressý^Wto reach one of the following options, then

press Select

4-1-1 Emergency key 9 - See page 34.

4-1-2 Automatic redial - See page 19.

4-1-3 Calling card - See page 26.

Call timers

Your phone automatically keeps

track of the approximate amount

of time you’ve spent in calls.

1. Press Menu 2-5 (Call log -

Call timers)

2. Scroll repeatedly to access the following options

Last call displays call duration of last call.

Note: Current call timer can be accessed by pressing Details

while using the Last call timer. See page 31 for details.

All calls displays call duration of all calls made since

timers have last been reset (see page 28 for details on

how to clear call timers).

Life timer shows duration of all calls; this cannot be

reset (see page 42).

Clear timers clears all call timers except the Life

timer (see page 28).

Note: The actual time invoiced for calls by your service provider

may vary, depending upon items such as network features,

rounding off for billing, and taxes.

Call waiting

With the call waiting feature, your phone will beep

during a call to let you know you have an incoming call.

Your phone may also display the incoming caller’s

identification

See “Call forwarding” on page 22 for details on caller ID.

Answering an incoming call with call waiting

Press

Swapping between two calls

Press

Ending the calls

Press

to end both calls

Activating call waiting

Note: Check the documentation provided by your service

provider for more details on this feature.

Caller ID

This is a network service that helps identify incoming

calls. Contact your service provider for details.

When Caller ID is active, your phone may display the

caller’s phone number. The caller’s name may also display

if their name and number has been stored in the phone

book or if the wireless network supports it.

Call or Call-caller ID unavailable will display when the

wireless network doesn’t recognize the calling number.

Also, Call-caller ID blocked may display if the calling

party has blocked caller ID.

Note: If you have stored a number more than once in your phone

book, and that number is stored each time with a different name,

then a name will not appear when someone calls from that

number.

See “Custom Tone” on page 32 for details on your phone book.

Calling card

If you wish to use a calling card for

long distance calls, you must first

store your calling card information

into your phone. Your phone can

store up to four calling cards.

Storing a calling card

1. Press Menu 4-1-3 (Settings - Call settings - Calling

card)

2. Press ^Wor ^Vto desired calling card, press Options

3. Press ^Wor ^Vto Edit, press OK

4. Enter security code and press OK

See “Security code”on page 60 for details on your phone’s security

code.

5. Press Select at the Dialing sequence prompt.

Press ^Wor ^Vto select the appropriate sequence for

your card. Contact your long distance provider for

details on the dialing sequence required.

Press Select to confirm your choice.

Note: The order of the steps to follow may vary, depending on

which dialing sequence your card uses.

6. Enter access number when prompted for the calling

card’s access number (usually the 1-800 number

listed on the back of the calling card), press OK

Note: You can also retrieve the access number from your phone

book if it has already been stored. Simply press Search, then W or

V to find the number.

7. Enter card number and/or PIN when prompted to

enter calling card number and personal identifica-

tion number, then press OK. Press OK again at Save

changes?

8. Press ^Wor ^Vto display Card name and press Select.

Enter card name using your phone’s keypad, then

press OK.

See “Entering text and numbers” on page 35 if you need help on

entering the card name

Choosing a calling card to use

1. Press Menu 4-1-3 (Settings - Call settings - Calling

card)

2. Press ^Wor ^Vto desired card, press Options

3. Press ^Wor ^Vto highlight Select and press OK

4. Enter security code at Security code:, press OK

5. Your phone will display Card ready for use

Making calling card calls

Enter the phone number, including any prefix (such as 0

or 1) that your calling card may require when you make a

calling card call. See your calling card for instructions.

Press and hold

for a few seconds until your phone

displays Card call.

When you see Wait for tone, then press OK, listen for

the tone, then press OK. When you see Wait for tone,

press OK again, listen for the tone, then press OK.

Note: This procedure may not apply to all calling card options pro-

grammed into your phone. Please look at the back of your calling

card or contact your long distance company for more information.

Change lock code

This feature allows you to change your lock code.

See “Changing your lock code” on page 43.

Change security code

This feature allows you to change your security code.

See “Changing your security code” on page 60.

Clear call lists

This feature will clear all dialed numbers, as well as

numbers of answered calls and missed calls. You cannot

undo this operation, so be careful.

Also, see “Call log” on page 23.

1. Press Menu 2-4 (Call log - Clear call lists)

2. Highlight either All, Missed, Received, or Dialed

and press OK (All will clear all call lists, while the

others clear their respective call lists)

Clear timers

This feature clears all call timers (except for the life

timer).

See “Call timers” on page 25 for more details.

1. Press Menu 2-5-4 (Call log - Call timers - Clear

timers)

2. Enter security code at Security code: and press OK

Careful:Clearingcall timerscannot beundone. Ifyouareusingthe

call timers to log or track the amount of time you are using your

phone, you may wish to record the call timers before you erase them.

Note: The life timer cannot be reset. See “Life timer” on page 42 for

details.

Clock

You can program your phone’s clock

two different ways: you can either

use the time and date information

that’s provided by the wireless

network, or you can set it yourself

with your own time.

You can also choose to hide the clock if you prefer.

Note: Your phone also features an alarm clock. See page 17 for

details.

By default, the date and time is automatically set to your

phone by your wireless network. If you wish to override

the network clock, do the following:

Setting your own time

1. Press Menu 4-2-1 (Settings - Phone settings - Clock)

2. Press ^Wto Time settings, press Select

3. Press ^Wýto Set clock, press Select again

4. Enter the current time, then press OK (time will

appear in hh:mm)

5. If the date has not been set, the phone will ask you

to enter the current date, then press OK (date will

appear in mm/dd/yyyy)

Selecting time format

If you choose am/pm format, you will notice a small

indicator that appears to the right of the displayed time.

If the indicator is at the top, it’s in am; if on the bottom,

it’s in pm.

1. Press Menu 4-2-1 (Settings - Phone settings - Clock)

2. Press ^Wto Time format and press Select

3. Press ^Wto either 24-hour or am/pm

4. Press OK

If the time is not automatically available because you are

outside of the digital network, or you wish to revert back

to the wireless network’s time, do the following:

Setting the network clock

1. Press Menu 4-2-1 (Settings - Phone settings - Clock)

2. Press ^Wto Time settings, press Select

3. Observe the text: Set by network, press Select

again

If you choose Set by network, your phone will display

Time is set.

Note: If you use the Set by network option while outside your

digital network, you will be prompted to enter your own time

(see above). Network time will replace the time you set once you

re-enter your digital network.

Note: If your battery has been removed or has drained outside the

digital network, you will be prompted to enter your own time only

if the battery is replaced or recharged while still outside of the

digital network (see above).

Displaying or hiding the clock

1. Press Menu 4-2-1 (Settings - Phone settings - Clock)

2. Press ^Wto either Hide clock or Display clock (only

one will display depending on the current setting)

3. Press Select

Conference call

This feature allows you to add a third party to a call.

Note: This feature may not be available in all wireless networks or

may be available as an option. Contact your service provider for

details and availability.

Making a conference call

1. While in a call, enter the second phone number and

press

Note: You can also make a third party call using the in-call

menu. While in a call, press Options and scroll to New call.

Enter the number you wish to call and then press OK.

2. Once the third party answers, press

to connect

all three parties

3. Press

party. Press

again if you wish to disconnect the third

to drop both parties.

Recalling a number from the phone book during

a conference call

1. During the call, press Options

2. Press ^Wor ^Vto Names and press OK

3. Press Select at Search

4. Enter name and press OK, or just press ^Wor ^Vto

scroll through the phone book

5. Press

Current call timer

This feature displays the running elapsed time on your

screen while a call is active. Once the call has ended,

simply press any key to clear the display (the display will

also clear automatically after 10 seconds).

Also, see “Call timers” on page 25.

Activating the current call timer

Press Menu 2-5 (Call log - Call timers) and press Details.

With Current call timer displayed, press Select, scroll to

On, and press OK

Note: As with all call timers, the actual time invoiced for calls by

your service provider may vary, depending upon items such as

network features, rounding off for billing, and taxes.

Custom Tone

This feature allows you to assign special ringing tones to

phone numbers already stored in your phone book. So

when your phone rings, you’ll be able to quickly identify

who’s calling.

Your phone will also display an icon to identify that this

person is in the custom tones list. You can assign as many

as 20 names and numbers to the list.

Keep in mind that caller ID must be available and active

in your phone in order to use this feature.

Note: If you have selected the Silent profile, your phone will not

ring when someone in your custom tone list calls.

Assigning a custom ringing tone to a name and

number

1. In your phone book, locate the person you wish to

add to the custom tone list.

2. With that person’s name or number highlighted,

press Options or Details and then Options (Depends

on scrolling view of name and number selected)

3. Scroll to Custom tone, then press Select

4. Scroll through the list of ringing tones that are dis-

played and press OK when you make your choice

Removing a name and number from the list

1. In your phone book, locate the person you wish to

remove to the custom tones list

2. With that person’s name or number highlighted,

press Options or Details and then Options (Depends

on scrolling view of name and number selected)

3. Scroll to Custom tone, then press Select

4. Scroll to Default and press OK

Customize profiles

This feature allows you to customize individual profiles.

See “Profiles” on page 53 for details.

Data and fax calls

Note: This feature may not be available in all wireless

networks. Contact your service provider for details and

availability.

Your phone can function as a fax/modem when connected

to your PC or laptop computer via the optional data cable.

You must also have the appropriate fax or data software

installed and configured to send and receive data or

faxes. (Please refer to the documentation included with

your DLR-3 Data Cable.)

Dialed calls

Your phone automatically stores the

last 10 numbers you’ve dialed.

1. Press Menu 2-3 (Call log -

Dialed calls)

2. Press ^Wor ^Vý

3. Press

to dial the number you wish to call

You can also access the last 10 dialed numbers if you press

once, then press ^Wor ^Vto scroll through the list.

Also, see “Call log” on page 23 for details on other call lists.

Dialed calls options

See “Call log options” on page 24.

Earpiece volume

You can adjust the listening volume of your phone’s

earpiece by pressing ^Wor ^Výto decrease or increase the

volume.

See “Volume” on page 70 for details.

Emergency calls

1. If the phone is not on, switch it on

2. Key in the emergency number for your present loca-

tion (e.g. 911 or other official emergency number).

Emergency numbers vary by location.

3. Press

IMPORTANT!

This phone, like any wireless phone, operates using radio signals,

wireless and landline networks, as well as user-programmed

functions which cannot guarantee connection in all conditions.

Therefore, you should neverrely solely upon anywireless phone for

essential communications (e.g., medical emergencies).

Remember, to make orreceiveany calls, the phonemust be switched

on and in a service area with adequate wireless signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone features

are in use. Check with local wireless service providers.

Ifcertain features are in use (keyguard, restrict calls, etc.), you may

first need to turn those features off before you can make an

emergency call. Consult this document and your local wireless

service provider.

When making an emergency call, remember to give all the

necessary information as accurately as possible. Remember that

your wireless phone may be the only means of communication at

the scene of an accident - do not cut off the call until given

permission to do so.

Emergency key 9

With this feature on, the phone attempts to make an

emergency call when you press 9, then

. The phone

dials the emergency number pre-programmed into your

phone.

Note: You can also dial an emergency call by pressing and holding

9 until the phone indicates it is attempting to make an emergency

call. However, this method does not work when Keyguard is active

or when the phone is connected to a modem.

Note: This feature is disabled while playing games, using the

calculator, or while editing (e.g. phone book entries, calendar, etc.).

Activating Emergency key 9

Press Menu 4-1-1 (Settings - Call settings - Emergency

key 9), scroll to On to activate or Off to cancel, then

press OK.

IMPORTANT!

Official emergency numbers vary by location (e.g. 911). Only one

emergency number is programmed into your phone to be dialed

automatically by Emergency key 9, which may not be the proper

number in all circumstances.

Entering text and numbers

You can enter text and/or numbers when storing

information into your phone via your phone’s keypad.

When you see the letter you wish to enter, simply press

the key associated with that letter until it appears on the

display (numbers also appear).

ABC mode

When you need to enter letters into your phone, it will

automatically switch over to

mode.

Your phone displays the

icon to indicate that your

phone is in ABC mode. It also displays when you are

viewing names rather than numbers.

When

Key

is displayed, you can enter these characters:

Characters

Key

Characters

.,’?!-1

PQRS7

ABC2

DEF3

GHI4

JKL5

TUV8

WXYZ9

Enters an empty space, 0

(See next page for details)

MNO6

Changes letter case;

long press toggles

between ABC/abc and

123 mode

While you’re editing a name, the ^Vkey will move the

cursor to the left, and ^Wwill move it to the right. Press

Clear to correct any mistakes.

If you wish to enter an empty space between characters,

press 0 for each space.

abc mode (Changing letter case)

Press the # key to switch between upper and lower case

letters. The

icon will switch to

to indicate

you are using lower case.

123 mode

When storing names to the phone book, you can enter a

number within a name at any time. Simply press that

particular number key a few times until it appears, or

press and hold the key for the same result.

However, you can do this more quickly by accessing the

mode, without having to scroll through each letter

to access the number you wish to enter.

Simply press the # key for about 2 seconds while in

mode and the

only numbers can be entered. Letters cannot be entered

unless your phone is in mode.

icon will appear. While in this mode,

Press the # key again for a couple of seconds if you wish

to deactivate the mode.

Special characters (for storing names)

When in

mode (see page 17), you can press the

key and a collection of special characters will

appear. You can use these characters to help when

storing names in your phone book. Simply press ^Wor ^V

to highlight the one you wish to use and press Insert.

. , ? ! : ; - + # ó ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = [ ] ¥

TIP: If you wish to access a special character that appears

toward the end of this list, press ^Vfor quicker access.

Also, you can access the . , ‘ ? ! - characters quickly by

pressing the

key while in

mode.

Special Characters (for storing and calling numbers)

The following special characters are helpful when you

store numbers to your phone book (see page 50). Simply

press the

key once or repeatedly, and the following

characters can be stored within the number sequence.

(p) creates a pause when a number is dialed; the

digits located to the right of the “p” are automati-

cally sent as touch tones after a 2.5 second pause

(see page 65).

(w) creates a “wait” when a number is dialed. The

“w” makes your phone wait for you to press Send or

, then it sends the digits located to the right of

the “w” as touch tones (see page 65).

You can add as many special characters as you need in a

single number sequence. These characters cannot be

entered while in

mode.

Erase all (text messages)

You can erase all read text messages quickly and easily

from the text messages menu (Menu 01-1).

See “Erasing all text messages” on page 64 for complete details.

Erase options for your phone book

See “Erasing stored names and numbers” and “Erasing your entire

phone book” on page 51.

Fax calls

Please see “Data and fax calls” on page 33 for more information.

Games

You have four exciting games to choose from in your phone.

Press Menu 6 to choose one of the following games:

REMEMBER! Your phone must be switched on to use this function.

Do not switch on the phone when wireless phone use is prohibited

or when it may cause interference or danger.

Memory

Reveal pictures to find pairs in as few tries as possible.

Move the cursor with the 2 (up), 4 (left), 6 (right), and 8

(down) keys.

Press the 5 key to reveal pictures. Press the # key to jump

right over revealed pictures or move from bottom right to

top left. Press the ∗ key to jump left over revealed

pictures or move from top left to bottom right. Once

found, pairs stay visible.

Snake

Feed the snake with as many goodies as possible and

watch it grow. Use keys 2 (up), 4 (left), 6 (right), and 8

(down) to turn the snake toward food. The snake can only

turn 90 degrees at a time.

The longer the snake’s tail grows, the higher the score.

Using a higher level of difficulty increases the snake’s

speed but also increases the point value for each goodie.

If the snake hits its own tail or the surrounding wall, the

game is over.

You can also try using keys 1 (up and left), 3 (up and

right), 7 (down and left), and 9 (down and right) to

control the snake’s direction.

Logic

Find a secret combination of figures. Available figures are

shown at the top of the display before you accept the first

guess row. Use the 2, 4 and 8 keys to move the cursor and

the 5 key to select the figure.

To copy a figure from a previously accepted guess row,

start scrolling with the 4 key, move the cursor to the

desired figure in the normal way and accept the selection

with the 5 key.

Once you think you have the right combination, press the

ó key. The result is presented as a set of marks over the

row. A correct figure in the right place gives a full mark;

a correct figure in the wrong place gives a half mark.

The game ends when all the figures are correct and in the

right place.

Dice

Use this to play other games that require a set of dice if

one isn’t available. Use the Level option to set the

number of dice, up to six. You can roll, lock, and unlock

each die as many times as you wish.

When you start a new game, the dice roll for a couple of

seconds and then stop. Use the 4 (left) and 6 (right) keys

to select a die. Press the 5 key to lock or unlock the

selected die.

Press ∗ to roll the unlocked dice again.

Game options

When you select a game, you can choose from the

following submenus:

Level allows you to choose the level of difficulty, except

for Dice, which selects the number of dice you wish to

play with.

New game starts a new game.

Top score will display the selected game’s highest score

ever played with your phone (does not appearin Logic orDice).

Instructions will describe how the game is played.

Last view may appear in the options list when the game

ends.

Continue may appear in the options list if the game is

interrupted (e.g. an incoming call).

Inbox

When you receive a text message, it’s stored in the Inbox.

Your phone will display Message received, along with the

text message icon, and you will hear a tone (depending on

the message alert tone; see page 44). Press the Read softkey to

read messages.

Please see “Text messagesand paging”on page 62 formore details

on this feature.

In-call menu

While you’re in a call, you may notice that Options

appears on your display. Pressing this key will access you

to the in-call menu, which allows you access to certain

features while you have a call active.

When you access the in-call menu, you may notice the

following choices:

Mute Allows you to mute the microphone; if your

microphone is already muted, Mute will change to

Unmute (see “Microphone” on page 45)

Touch tones Allows you to manually enter a touch tone

string or search for one in your phone book (see “Phone

book” on page 49)

Menu Allows you access to your phone’s menu

Names Allows you access to your phone book (see “Phone

book” on page 49)

New call Allows you to place the call to the third party

when making a conference call (see "Conference call" on

page 30)

Keyguard

This feature disables the keypad to protect against

accidental keypresses.

See “Keyguard” on page 15 for more details.

Keypad tones

This is one of the settings in your phone’s profiles (see

page 53). It sets the volume of the tone you hear when you

press your phone’s keys.

Note that if you choose the Silent profile, keypad tones

will be turned off.

Setting the keypad tones

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^ýWto highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press ^Wto

Keypad tones and press Select

4. Press ^Wto scroll through the options; your phone

plays a sample of each. Press OK for the one you

want.

Language

Because many wireless phone

customers speak English as a second

language, your phone allows you to

choose your phone’s displayed

language.

Choosing a language for your phone

1. Press Menu 4-2-5 (Settings - Phone settings -

Language)

2. Use ^Wor ^Vto select the language you wish to use

and press OK

You can choose from English, French, Spanish, Portuguese,

Chinese (traditional), Chinese (simplified) or Hebrew.

Last call timer

This feature displays the duration of your last call.

See “Call timers” on page 25.

Last number redial

When you want to call your last dialed number,

Press

, then

again

Note: You must be at the start screen before you press

Letter case

You can change from upper to lower case when entering

letters into your phone.

See “abc mode (Changing letter case)” on page 36 for more details.

Life timer

The life timer displays the approximate total time of all

calls dialed and received with your phone (in hours and

minutes only). The life timer cannot be reset.

Press Menu 2-5-3 (Call log - Call timers - Life timer) to

view your phone’s life timer.

Note: The actual time invoiced for calls by your service provider

may vary, depending upon items such as network features,

rounding off for billing, and taxes.

Also, see “Call timers” on page 25.

Lights

This is one of the settings in your phone’s Car profile

(see page 53). This feature determines whether the lights

are on only when you use your phone, or if they are on at

all times. This setting works only when your phone is

connected to a car kit.

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^ýWto highlight the

profile you want and press Options.

Note: Car will not appear in the list until the phone has been

connected to a car kit at least one time.

3. Highlight Customize and press OK. Press ^Wto

highlight Lights and press Select.

4. Use ^Wto scroll through your choices and press OK

If you select Automatic, your phone’s lights are turned

off within fifteen seconds if no keys are pressed. If On is

selected, then the lights will remain on the entire time

your phone is connected to the car kit.

Listen to voice messages

This feature allows you to access your voice messages.

See “Voice messages” on page 69 for complete details.

Lock code

You’ll need the lock code to activate and deactivate

Phone Lock (see page 51), or to change your lock code. The

default lock code is 0000. If you enter an incorrect lock

code five times in a row, your phone will prompt you for

the security code (see page 60).

Changing your lock code

In a lock code, only numeric characters are accepted.

1. Enter Menu 4-3-2-3 (Settings - Security settings -

Access codes - Change lock code)

2. Enter lock code at Enter lock code: and press OK

3. Enter new lock code, press OK

4. Verify new lock code, press OK

Note: When you change your lock code, make sure you store it in a

safe place, away from your phone. Avoid entering access codes

similar to emergency numbers to prevent accidental emergency

calls.

Manual touch tones

This setting determines how long touch tones are

produced as you press the keys on the keypad. Note that

touch tones are sometimes called DTMF tones.

See “Touch tone length” on page 65 for details.

Setting manual touch tones

Press Menu 4-2-3-1 (Settings - Phone settings - Touch

tones - Manual touch tones) and highlight one of the

following options, then press OK.

Continuous means the tone sounds for as long as

you press and hold the key.

Fixed sets the tone length to .1 second, regardless

of how long you press the key.

Off turns the tones off, and no tones will be sent

when you press the keys.

Memory status

This feature allows you to see how many free and in-use

memory locations are in your directory.

Also, see “Phone book” on page 49.

Press Names, scroll to Options and press Select. Then

scroll to Memory status and press Select again.

Messages

This feature allows you to access your voice and text

messages, as well as composing your own welcome note.

Using messages

1. Press Menu 01 (Messages)

2. Pressý^Wto reach one of the following options, then

press Select

01-1 Text messages - See page 62.

01-2 Voice messages - See page 69.

01-3 Welcome note - See page 71.

Message alert tone

This is one of the settings in your phone’s profiles

(see page 53). It sets the tone that your phone makes when

you get a text message.

Also, see “Text messages and paging” on page 62.

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^ýWto highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press ^Wto high-

light Message alert tone, then press Select.

4. Use ^Wto scroll through your choices (your phone

plays samples) and press OK.

Microphone

You can mute and unmute your phone’s microphone

while a call is in progress. During a call, your phone’s

softkeys change from Names and Menu to Options and

Mute.

Muting and unmuting your phone

You can mute the phone’s microphone during a call;

simply press Mute. To unmute the microphone, press

Unmute.

If these texts are not available, press Options, scroll to

Mute or End mute and press Select.

Muting and unmuting also affect the microphones of any

accessories connected to the phone.

Missed calls

If Caller ID is available, your phone will keep track of the

last 10 calls you have missed if you weren’t around to

answer the call. You can even find out what time they

called.

Missed calls will appear in your phone only if it was

turned on and in a service area when the call was missed.

If the display says ‘Missed call’

Press List. To call back the displayed number, press

Press Exit to go back to the start screen.

Missed call options

See “Call log options” on page 24.

Checking the missed calls list anytime

Press Menu 2-1 (Call log - Missed calls), then scroll

through the list.

When the Forward if not answered option (if available

from your service provider) in the Call Forwarding feature

(see page 22) is selected, your phone will not treat the

forwarded calls as missed calls.

Also, see “Call log” on page 23 for details on other call lists.

NAM selection

The Number Assignment Module (NAM) is the phone’s

storage location containing the assigned phone number

and other system provider information. This information

is entered when programming your phone.

Only one number can be active. The first phone number

displayed with this menu is the currently selected

number.

Selecting the NAM for your phone

1. Press Menu 4-4-5 (Settings - Network services -

NAM selection),

2. Use ^Wor ^Vto select the phone number you want to

use and press OK.

Note: You need at least one active number to make calls. Your

phone is factory programmed to accept 1 NAM only.

NAM update

The Number Assignment Module (NAM) update feature

may appear in your phone. Contact your service provider

for more details.

Network feature setting

Call forwarding (page 22), Call waiting (page 25) and Send

own caller ID (page 61) are network services available

through your service provider.

When you subscribe to any of these services, your service

provider gives you a separate feature code to activate

each service. Deactivation codes are used to deactivate

each service.

Once you store the appropriate code in your phone, the

service appears as a menu item. You can then use the

menu to activate and deactivate these services.

Note: These feature codes may already be stored in your phone by

your service provider. Check with your service provider to confirm

if these codes are already configured in your phone.

Storing feature codes

1. Press Menu 4-4-4 (Settings - Network services -

Network feature setting)

2. At Feature code:, enter the feature code or deacti-

vation code received from your dealer (e.g. ∗72, ∗73,

etc.), press OK

3. ^Wto the service that the code applies to and press

Select

4. ^Wto suboption, then Select (Repeat step as

required, based on number of suboptions)

(Use step four only for call forwarding options)

5. ^Wto Activate or Cancel, then press OK

Network services

Some of the features in this menu are network services

that require a subscription. See your service provider for

details and availability.

4-4-1 Call forwarding * - See page 22.

4-4-2 Call waiting * - See page 25.

4-4-3 Send own caller ID with next call * -

See page 61.

4-4-4 Network feature setting - See page 46.

4-4-5 NAM selection - See page 45.

4-4-6 NAM update - See page 46.

* These features will not appear in the menu unless they are

activated using Network feature setting. See “Network

feature setting” on page 46 for details.

These features may not be available in all wireless networks.

Contact your service provider for details and availability.

One-touch dialing

This feature allows you to make phone calls quickly and

easily with the touch of a button.

You must store names and numbers in your phone book

(see page 50) before you can use this feature. Then you

can assign a name from the phone book to a one-touch

dial location using your phone’s keys 2 through 8.

Note: Keys 1 and 9 are used exclusively for dialing your voice

mailbox (see page 69) and for attempting emergency calls (see

page 79) to the emergency number programmed into your phone

(e.g. 911 or otherofficial emergencynumber). Pressand hold either

of these keys to initiate the appropriate call.

Assigning one-touch dial locations

1. Press Names, scroll to 1-touch dialing and press

Select

2. Scroll to next available empty location, (empty) will

appear, then press Assign

3. Scroll to select desired name and press Select

4. Repeat as necessary

Calling a number using one-touch dialing

Press and hold the key (2 through 8) for a few seconds to

call the number in the corresponding one-touch dial

location. You can also press the key and then

prefer.

if you

Your phone recalls the phone number from the memory,

displays it briefly, then dials it.

Changing numbers in one-touch dial list

With this feature, you can assign a different number to

any one-touch dial location.

1. Press Names, scroll to 1-touch dialing and press

Select

2. Scroll to the location you wish to change and press

Options

3. Scroll to Change, then press Select

4. Scroll through phone book to select new number

and press Select

Erasing one-touch dial locations

1. Press Names, scroll to 1-touch dialing and press Select

2. Scroll to the location you wish to erase and press

Options

3. Scroll to Erase, press Select, then press OK at Erase?

Paging

You can receive pages with your phone.

See “Text messages and paging” on page 62.

Phone book

You can store up to 200 numbers and associated names

in your phone’s memory. These numbers are right at your

fingertips for easy dialing.

Things to know about the phone book:

Stored numbers may be up to 32 digits long.

Stored names may be up to 16 characters long.

You cannot store identical names into your phone

(e.g., John, John); make sure you use unique names

in your phone book (e.g., John H., John W.). If you try

to use a name that already exists, Replace? will be

displayed, followed by the currently stored name.

Press OK to replace the existing entry or Back to

return to the previous screen.

Accessing the phone book

Press Names, scroll to desired submenu and press Select.

About the submenus

The phone book has several submenus from which you

can choose.

Search allows you to search for a specific name.

Add new allows you to enter new names and numbers.

Edit lets you edit the current phone book entry.

Options lets you choose your scrolling view, as well as to

show memory status.

1-touch dialing allows you to assign up to seven one-

touch dial locations (see page 47 for details).

Erase all lets you erase every name and number in your

phone book. You can erase one name and number at a

time by pressing Details, then Options when viewing a

name already in the phone book.

Own Number displays your own phone number.

Storing a name and number

1. Press Names

2. Scroll to Add new and press

Select

3. Enter name using the keypad

(use # to switch between

upper and lower case) and press OK

You can also press the

key to insert any special

characters (see page 36 for a list of special characters)

4. Enter phone number and press OK

Also, see “Entering text and numbers” on page 35 and “Quick save”

on page 62.

Changing a number stored with a name

1. Recall stored name, then press Details to view

number

2. Press Options, scroll to Edit and press Select

3. Press OK while name is displayed, unless you wish to

change it. If so, press and hold Clear, re-enter name

and press OK

4. Press and hold Clear to erase number or use the ^W

and ^Vkeys to edit

5. Enter new number

6. Press OK to save new number

Recalling names and numbers

At the start screen, press ^Wor ^Vto view names in

directory. Then scroll to the person you wish to call and

press

to dial the number (phone will display number

dialed to confirm).

Recalling numbers by name

At the start screen, press Names (or just press ^Wor ^V).

Then press the number on the keypad with the

corresponding first letter of the name you wish to call.

Keep pressing to get to the next letter on that key.

You can also recall numbers by name by pressing Names,

then press Select at Search. Enter the name of the

person you wish to recall and press OK.

Note: If you only entered the first letter of the name and there are

several names beginning with the same letter, press W or V until

the desired name appears.

Erasing stored names and numbers

1. Recall stored name

2. Press Details, then press Options

3. Highlight Erase, then press Select, then OK

Note: You cannot undo Erase functions, so be careful!

Erasing your entire phone book

1. Press Names

2. Scroll to Erase all and press Select

3. Press OK at Are you sure?

4. Enter security code at Security code:

5. Press OK

Warning: This feature will erase your entire phone

book, which cannot be undone!

Phone lock

This feature protects your phone from unauthorized

outgoing calls or unauthorized access to information

stored in the phone.

With phone lock activated, Phone locked will be

displayed each time you turn your phone on or off.

You will be prompted for your lock code when you press

either Names or Menu (Call not allowed will be

displayed if you attempt to place a call while phone is

locked). Once your lock code has been accepted, your

phone will function normally.

Note: The default lock code is 0000 (see page 43 for details).

Activating and deactivating phone lock

Press Menu 4-3-2-1 (Settings - Security settings -

Access codes - Phone lock). Enter the lock code then

press OK. Then scroll to On or Off, and press OK.

Complete the phone lock activation or deactivation by

turning your phone off and back on.

When your phone is locked, calls may be possible to the

emergency number programmed into your phone (e.g. 911

or other official emergency number) including calls with

Emergency key 9 (page 34).

You can also store a number in the Unlocked phone

number location, which allows you to call this number

even though your phone is locked (see page 67 for details).

Answering a call with phone lock on

Press any key except

and

Phone settings

Phone settings allows you access to other phone features

such as an alarm clock and your phone’s language.

Using phone settings

Press Menu 4-2 (Settings - Phone settings), then scroll

to one of the following options, then press Select:

4-2-1 Clock - See page 29.

4-2-2 Alarm clock - See page 17.

4-2-3 Touch tones - See page 65.

4-2-4 Restore factory settings - See page 55.

4-2-5 Language - See page 41.

Profiles

You can adjust and customize your

phone to whatever environment you

find yourself in (e.g. shopping, a

movie, etc.). Each profile uses its

predefined settings to determine

your phone’s ringing volume, ringing tone, message alert

tone, keypad tones, warning tones, etc., for a number of

different environments.

These settings can be changed at any time, and each

profile can be selected in a matter of seconds.

Note: Restore factory settings (see page 55) will reset any changes

made in profiles back to the factory defaults. The default setting is

Normal.

Accessing profiles

Press Menu 3

Selecting a profile

Quickly press the key to view a list of the available

profiles. Then press ^Wor ^Vto choose another profile and

press OK.

When you select a profile other than Normal, it will

appear on the start screen.

This only allows you to select a profile; you cannot

customize them here. Keep reading to learn how to

customize a profile.

Customizing profiles and other options

Press Menu 3 (Profiles) and scroll to desired profile, then

press Options.

Once Options is selected, Select, Customize and Rename

may appear as your choices. Once you have selected and

highlighted one of these items, press OK. If you wish to

go back to the main menu, press Back.

Select activates the profile.

Customize allows you to customize a profile by

changing its settings. When you reach one of the fol-

lowing settings within a profile, press Select. Once

you make your choice within that setting, press OK.

•

Ringing options

Ringing volume

Ringing tone

Vibrating alert

Keypad tones

Warning and game tones

Message alert tone

Lights (appears only in Car)

Automatic answer (appears only in Car and Headset)

Rename allows you to rename certain profiles.

Note: Car and Headset will not appear in the profiles list unless

your phone has been connected to a car kit or a headset. However,

they will remain in the menu once connected for the first time.

Note: When you change a setting in any profile, it only affects that

profile and will not change your phone’s normal settings.

Renaming profiles

1. Press Menu 3 (Profiles)

2. Scroll to desired profile, then press Options

3. Scroll to Rename and press OK

4. Enter new name and press OK again

Note: Normal, Car, and Headset profiles cannot be renamed.

Received calls

If Caller ID is available, this feature shows you the phone

numbers of the 10 most recent calls you’ve answered.

Press Menu 2-2 (Call log - Received calls), then ^W

to scroll the numbers.

Also, see “Call log” on page 23 for details on other call lists.

Received calls options

See “Call log options” on page 24.

Restore factory settings

You can reset the settings of many of your phone’s

features to factory defaults (as in a new phone).

Restoring factory settings

Press Menu 4-2-4 (Settings - Phone settings - Restore

factory settings), enter security code and press OK.

Note: Your phone book, timers, language selection, security code

and lock codes are not reset. However, any profiles you have mod-

ified will reset when you restoreyoursettings. Plus, ifyou areusing

yourphone’s clock[versus using the network provided clock] it will

reset as well.

Renaming profiles

See “Profiles” on page 53.

Restrict calls

This feature allows you to restrict incoming and outgoing

calls. Outgoing and incoming calls are restricted from a

list of restrictions that you create yourself.

Restricting incoming and outgoing calls

Upon selecting Restrict outgoing calls or Restrict

incoming calls from the menu, you are presented with 2

options:

Select allows you to select call restrictions from the

outgoing calls list.

Add restriction allows you to create your own list of

outgoing call restrictions.

Once you have accessed Add restriction and have added

at least one restriction, the following options will be

added to the menu for that option:

Edit allows you to edit an existing outgoing call restriction.

Erase will erase any existing outgoing call restrictions.

Note: When calls are restricted, calls may be possible to the

emergency number programmed into your phone (e.g. 911 or other

official emergency numbers). However, Emergency key 9 may not

operate depending on the type of restriction you choose.

Adding outgoing and incoming call restrictions

You can add up to 10 restrictions for outgoing calls, and

15 for incoming calls. The maximum number of

characters you can enter for each restriction is 15.

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls or Restrict

incoming calls and press Select

3. Enter the security code (see page 60) and press OK

Note: The message “Caller ID must be available” will display

prior to creating an incoming call restriction.

4. Press ^Wor ^Vto Add restriction to create an

outgoing or incoming call restriction and press OK

5. Enter the number string you wish to restrict and

press OK, for example:

If you wish to restrict all calls that begin with 1,

enter 1

If you wish to restrict all calls that begin with 1905,

enter 1905

If you wish to restrict all calls that begin with 416,

enter 416

6. If you wish to enter a name for the call restriction,

enter the name using your phone’s keypad, then

press OK. If a name is not entered, the number that

is restricted will appear in place of the name.

Note: When creating a new restriction, that restriction is

automatically selected (enabled) at the time it is saved.

Selecting call restrictions

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls or Restrict

incoming calls and press Select

3. Enter the security code and press OK

4. Scroll to Select and press OK

5. Scroll to each restriction you wish to use and press

Mark; press Unmark to deactivate existing restrictions

6. Press Back and then press Yes at Save changes?

Editing call restrictions

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls or Restrict

incoming calls and press Select

3. Enter the security code (see page 60) and press OK

4. Scroll to Edit and press OK

5. Scroll to the restriction you wish to edit, press OK

Note: If no name has been entered for a restriction, the

restricted number will be displayed.

6. Press and hold Clear to erase entire number, then

enter the new characters. Or use ^Wor ^Vto move the

cursor to the desired location and delete a character

or insert additional characters. Press OK when

finished.

7. Edit name if desired using same procedure as above

Erasing call restrictions

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls or Restrict

incoming calls and press Select

3. Enter the security code (see page 60) and press OK

4. Scroll to Erase and press OK

5. Scroll to the restriction you wish to erase, press OK

6. Press OK again to erase restriction

Note: The All calls option cannot be erased and therefore does not

appear in the list of restrictions to be deleted.

Ringing options

This is one of the settings in your phone’s profiles (see

page 53). It allows you to choose whether or not your

phone rings, beeps, or remains silent when someone calls

you. This feature does not affect incoming text message

alert tones (see page 62).

Selecting ringing options

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^ýWto highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press ^Wto

Ringing options, then press Select.

4. Highlight either Ring, Ascending, Ring once, Beep

once or Silent and press OK

Note: The Ascending ringingoption playsthe selected ringing tone

at a low volume, then gradually increases in intensity with each

ring.

Ringing tone

This is one of the settings in your phone’s profiles

(see page 53). It allows you to choose one of the many

ringing tones your phone uses for incoming voice calls.

If you set Ringing Options (see page 57) to Silent or Beep

once, ringing tones are automatically disabled; however,

incoming calls can still be received.

Selecting ringing tones

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^ýWto highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press ^Wto

Ringing tone, then press Select.

4. Press ^Wto scroll through the options. After you hear

the tone you wish to use, press OK.

Ringing volume

This feature, which is found within your phone’s profile

settings, allows you to adjust your phone’s ringing

volume.

See “Volume” on page 70 for details.

Roaming Indicators

Your phone is roaming when you use it outside of the

home area. Availability of roaming access to a different

carrier and types of calls you can make varies with the

agreement between your home carrier and serving

carrier. Check with your service provider for details about

roaming in a specific area.

Saved

This is where saved text messages are stored.

See “Text messages and paging” on page 62 for details.

Scrolling view

You have three different options on how you can view the

phone book. Your choices are:

Name list shows all stored names in a scrolling list. Three

names will appear at any given time. To view other names

in the directory, scroll back and forth through the list

using ^Wor ^V. Name list is the default setting.

Name+number displays individual names and numbers

stored in your directory. Only one name will display on

your screen at a time, with the corresponding phone

number. Use ^Wor ^Vto view other names.

Name only shows individual names only on a full screen

display. To view other names, use ^Wor ^V. You can view

the corresponding phone number by pressing Details,

then ^Wor ^V.

Selecting your scrolling view

1. Press Names

2. Scroll to Options, then press Select

3. Press Select at Scrolling view

4. Press ^Wor ^Vto select either Name list,

Name+number, or Name only, then press OK

Security code

Your phone’s default security code is 12345. It’s highly

recommended that you change this code at once, write it

down, and store it in a safe place away from your phone.

Your phone will prompt you for a five digit security code

for certain features. These features can be used only after

the correct security code has been successfully entered.

Note: When entering your security code, ***** will appear on the

display to keep others from viewing your code.

If you make a mistake entering the code, erase the last

entered digit by pressing Clear (or press and hold Clear

to delete all the digits on your display). Then enter the

correct code or press Back to exit the current feature.

If you enter an incorrect security code (Code error will

appear) five times in a row, your phone won’t accept any

entries for the next five minutes.

Changing your security code

1. Press Menu 4-3-2-4 (Settings - Security settings -

Access codes - Change security code)

2. Enter security code and press OK

3. Enter new security code at Enter new security

code:, press OK (must be five digits)

4. Enter new security code again at Verify new

security code:, press OK

5. Phone will display Security code changed

Note: If you have changed your security code and don’t remember

the new code, contact your service provider. Once you have

changed your security code, the default setting is no longer valid.

Security settings

This menu includes the following security features:

4-3-1 Restrict calls - See page 55.

4-3-2 Access codes - See page 17.

The Access codes submenu includes Phone lock (page 51),

Unlocked phone number (page 67), Change lock code

(page 43), and Change security code (page 60).

Send own caller ID with next call

May not be available through all service providers.

Settings

This main menu allows you access to other features.

See these individual entries for more information.

4-1 Call settings - See page 24.

4-2 Phone settings - See page 52.

4-3 Security settings - See page 61.

4-4 Network services - See page 47.

Storing a name and number

You can save names and numbers in the Phone book.

Either use the method described in “Storing a name and

number” on page 50 or the “quick save” method

described below.

Quick save

Enter the phone number and press Save. Enter a name at

Name: if you wish (optional), then press OK.

Note: To save the number without entering a name, press and hold

Save for 2 seconds. The number will appear at the end of your

phone book list.

Also, see “Entering text and numbers” on page 35.

Synchronization

Your phone supports synchronization of its phone book

with many popular Personal Information Manager (PIM)

programs (e.g. Lotus Organizer, Microsoft Outlook,

Symantic ACT!) by using 3rd party software.

Synchronization of contacts and phone numbers between

your phone and PC will also require the optional DAU-9P

serial cable. Check with your local service provider for the

availability of these products.

System Selection

The system selection is programmed by your service provider.

Please contact your service provider for more information.

Depending on your service provider, the options displayed

for the System menu may include the following:

Automatic means your phone will attempt calls to a home-

type system before trying to use a non-home type system.

[Home area] means your phone will attempt calls via

your service provider’s system only. If your service

provider’s system is unavailable, your phone will display

No service.

Text messages and paging

When you subscribe to the text messaging network service,

you can receive text messages and pages with your phone.

See your service provider for details and availability.

Text message options

Inbox is where incoming messages are received and

stored. All new, unread messages are kept here.

Saved is where all saved, read messages are kept here.

Erase all allows you to erase all text messages. However,

unread text messages will not be erased.

Receiving text messages

The maximum length of a received text message is about

250 characters. Your phone has space to receive up to 30

text messages, depending on the length of each one.

Note: Text messages that you receive with your phone may appear

different at times, due to messages that originate in networks

other than your own. This does not affect the use of your phone in

any way.

Also, the maximum length of a text message may depend on the

network’scapabilities. Seeyourservice providerforadditional text

messaging information.

When you receive a text message

Text messages are shown in the order that they were

received, in their order of priority.

*New emergency message indicates that the message or

page received was sent by someone via the service

provider. Emergency messages are sent only in situations

where life and/or property are in immediate danger.

Emergency messages are listed first and will override all

other messages.

*Urgent messages are also high priority messages,

although emergency messages have higher priority.

*Note:Thesefeaturesmaynot beavailablein allwirelessnetworks.

Contact your service provider for details and availability.

Message received indicates the existence of an unread

message or page. If more than one message exists, the

number of received messages will be displayed, followed

by the messages or pages in the order they were received.

Reading text messages

With Message received displayed,

1. Press Read and scroll to new message

2. Press Read again

Reading options

Press Options while a text message is displayed to access

the following reading options.

Erase will erase the message.

Save will save the message to the Saved folder.

Use number captures the telephone number displayed in

the incoming text message, permitting you to either save

the number in your phone book (see “Phone book” on

page 49), or place a call to the number (see “Calling someone

back” on page 65).

Erasing a text message

1. With the message on the display, press Options

2. Scroll to Erase and press OK

3. Press OK again at Erase message?

Erasing all text messages

1. Press Menu 01-1-5 (Messages - Text messages -

Erase all)

2. Scroll to the desired option:

All messages will erase all messages that have been

read from both the Inbox and Saved folder.

Inbox will erase only those messages in your Inbox

that have been read.

Saved will erase messages in the Saved folder.

3. Enter your security code and press OK

Receiving a page

Your phone will display Message received. The message

will display Call:, followed by the name or number of the

person who paged you. Names will appear only if that

person has been stored in the phone book.

Calling someone back

The message along with the phone number must be

visible on your phone’s screen. While the text message is

displayed,

1. Press Options

2. Select Use number, then press OK

To quickly call back a number in a message

Press

while the message (including the phone

number) is displayed. After the number has been dis-

played on the screen for 3 seconds, the call will be

placed.

Note: If more than one number is on the display, the numbers are

displayed in a list. Simplyselect the phonenumberyou want tocall

and press

. If no numbers are found, your phone will display

No number found.

When your phone’s memory is full

When you have an incoming text message and your

phone’s memory is full, one or more messages, of lowest

priority, will automatically be deleted in order to receive

the new text message.

If the message memory is still full, your phone will display

No space: read messages. You can clear this notification

by pressing OK.

Note: Messages are usually deleted from your Inbox. An incoming

emergency message may delete messages from your Saved folder.

Touch tone length

This feature determines the length of each touch tone

when they are sent automatically.

Short sets the tone length to .1 second. Long sets the

tone length to .5 second.

You can set the touch tone length by pressing Menu

4 2 3 2 (Settings - Phone settings - Touch tones - Touch

tone length).

Touch tones

Your phone can generate various sounds, called touch

tones, when the keys are pressed. These are also known

as DTMF tones.

Touch tones can be used for many automated, over-the-

phone services such as checking bank balances, airline

arrival and departure times, and using voice mailbox

options. Touch tones can be sent only when a call is active.

Storing touch tone strings

Store touch tone strings the same way you store phone

numbers (see page 50).

You can store a whole digit sequence in your phone book

and send it as touch tones for frequently-used strings of

numbers.

Sending a touch tone string

Make sure Menu 4-2-3-1 (Settings - Phone settings -

Touch tones - Manual touch tones) is not set to Off.

During a call,

1. Press Options

2. Scroll to Touch tones and press OK

3. Enter touch tone string or recall string from the

phone book and press OK

Note: Use caution when sending confidential information over the

air when using DTMF tones in analog mode.

Storing touch tone strings with phone numbers

1. Enter the phone number (e.g. your office voice mailbox)

2. Press ∗∗∗ (p) or ∗∗∗∗ (w)

3. Enter the touch tone string (e.g. voice mailbox

password)

4. Store the number in the usual manner

Note: See “Special Characters (for storing and calling numbers)”

on page 37 for details on “p” and “w” characters.

When you dial this number, your phone first dials the

phone number, then waits (because of the “w” character)

for you to press the soft key

sends your password.

Send. Your phone then

If you include a “p” character instead of a “w”, your phone

pauses for 2.5 seconds, then automatically sends your

password as touch tones.

Linking phone numbers with touch tone strings

This feature allows you to store a phone number in one

phone book location and link it to another phone book

location that contains a touch tone string.

First, you must store the touch tone string into a phone

book location and then assign it a one-touch dialing

location (see “One-touch dialing” on page 47).

1. Enter the phone number you wish to link with the

touch tone string

2. Press ó twice (you should have a + character next to

the phone number)

3. Enter the one-touch dialing location where the

touch tone string is stored (e.g. if the string is stored

in location 2, then enter 2)

4. Press Save and then enter the name that corre-

sponds with the phone number (this is optional)

5. Press OK

When you wish to call this number, make the call as you

normally would. Then, when you wish to send the touch

tone string, simply press OK.

Unlocked phone number

When the phone lock is on, no calls can be made. But if

you store a number in the unlocked phone number

location, you can make a call to that number while the

phone is locked.

See “Phone lock” on page 51 for details on phone lock.

Storing the unlocked phone number

1. Press Menu 4-3-2-2 (Settings - Security settings -

Access codes - Unlocked phone number)

2. Enter lock code and press OK

3. Enter phone number at Number: (or press Search

and scroll through the phone book)

4. Press OK

Calling the unlocked phone number

Note: Your phone must be locked via the phone lock to use this

feature.

At the start screen, press ^Wor ^Vonce, then

you can manually enter the phone number as it is

stored and press

Vibrating alert

This is one of the settings in your phone’s profiles (see

page 53). Your phone has an internal vibrating feature, so

you can set your phone to vibrate when you receive a

voice call.

Activating vibrating alert

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^ýWto highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press ^Wto reach

Vibrating alert, then press Select.

4. Use ^Wto highlight On or Off and press OK. If you

choose On, your phone will vibrate even if you have

set Ringing options (see page 57) to Silent.

Note: The vibrating alert does not work when your phone is

connected to any charger or car kit. Also, if you have chosen the

Ring once optionfortheprofileyou’reusing, the vibrating alert will

only vibrate once when your phone rings.

Voice mailbox number

This number dials your voice mailbox.

See “Voice messages” in next section.

Voice messages

Voice mail is a network service that may require a

subscription from your service provider.

Once everything is set up for your voice mailbox (see

below), your phone will notify you when you receive a

voice message.

New voice message will appear on the display along with

the

icon, and you’ll hear a short beep. Your phone

will display the number of voice messages if you’ve

received more than one.

Setting up your voice mailbox

Before you can retrieve any voice messages, you need to

store your voice mailbox number. Your voice mailbox

number is 1+ your own phone number including the area

code.

When you’re ready to store your voice mailbox number,

press Menu 01-2-2 (Messages - Voice messages - Voice

mailbox number). Then enter your voice mailbox phone

number and press OK. This number can be up to 32 digits

long and is used until it’s changed. So if your phone

number changes, you may need to change your voice

mailbox number along with it.

Greetings, passwords, and prompts

These may vary in different wireless networks. So if you

need information about how to record your greeting or

how to store your password, contact your service

provider. You’ll also need to contact them on how to

listen to voice messages once you’re connected to your

voice mailbox.

Listening to your voice messages

If New voice message is displayed, just press Listen and

follow the prompts. If you’d rather listen to your

messages later, press Exit.

You can listen to messages anytime if you press and hold

the 1 key (or press 1, then

). Calling voice mailbox

will appear on the display. Or if you prefer, you can access

your voice mailbox by pressing Menu 01-2-1 (Messages -

Voice messages - Listen to voice messages).

Volume

You can adjust the ringing volume and earpiece volume

with your phone.

Earpiece volume

During a phone call, you can adjust the listening volume

for your phone’s earpiece. The top scroll key increases

while the bottom one decreases the volume.

If an accessory like a headset or a car kit, or one with its

own loudspeaker, is connected to your phone, the scroll

keys will adjust the volume for that accessory.

Note: Using the scroll keys to adjust earpiece volume functions

only during phone calls.

Ringing volume

This is one of the settings in your

phone’s profiles (see page 53). It sets

the default ringing volume for

incoming voice calls and message

alert tones.

Setting the ringing volume

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^ýWto highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press ^Wto

Ringing volume, then press Select.

4. Press ^Wto scroll through the options. When you

hear the volume level you wish to use, press OK.

Warning and game tones

This is one of the settings in your phone’s profiles (see

page 53). Warning and game tones include those sounds

your phone makes for conditions such as errors,

confirmations, power on, battery low, and recharge

battery, or sounds made during game play.

Turning warning tones on and off

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^ýWto highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press ^Wto

Warning and game tones, then press Select.

4. Use ^Wýto highlight On#or Off and press OK

Welcome note

You can program a welcome note into your phone to

display a message when you first turn it on (e.g. hello,

your name, a reminder, etc.). The maximum length is 36

characters.

1. Press Menu 01-3 (Messages - Welcome note)

2. Enter new message or edit an existing one

3. Press Options

4. Press ^Wto Save or Erase and press OK

The welcome note displays each time your phone is

switched on. Characters you enter are added to the left of

the cursor. Press Clear to delete characters to the left of the

cursor. Press ^Wýor ^Vto move the cursor right or left.

See “Entering text and numbers” on page 35 for details.

6. Accessories

If you want to enhance your phone’s functionality, an

extensive range of accessories is available for you. You

can select any of these items to help accommodate your

specific communication needs. For availability of these

and other accessories, contact your service provider.

A few practical rules for accessory operation:

Keep all accessories out of reach of small children.

When you disconnect the power cord of any acces-

sory, grasp and pull the plug, not the cord.

Check regularly that any vehicle-installed acces-

sories are mounted and are operating properly.

Installation of any complex car accessories must be

made by qualified personnel only.

Use only batteries, chargers and accessories approved by the

phone manufacturer for use with this particular phone model.

The use of any othertypes will invalidate any approval orwarranty

applying to the phone, and may be dangerous.

See page 6 for important battery usage information.

For availability of approved accessories, please check with your

service provider.

Batteries

The following table shows battery options that are

available for your phone, charging times with the Rapid

Travel Charger (ACP-9U) and the Standard Travel Charger

(ACP-7U), talk times, and standby times. Consult your

service provider for more information.

Charging Times

ACP-7U

Charger

ACP-9U

Charger

Battery Option

BLS-2 Extended Battery Li-Ion

900 mAh (included with phone)

4 hrs

2 hrs

BMS-2S Extended Battery NiMH

900 mAh

1 hr 30 min

3 hrs 30 min

BLS-4 Ultra Extended Battery Li-Ion

1500 mAh

5-6 hrs

Note: The times displayed above are approximate and will allow

your battery to obtain approximately 80% of its capacity. At this

time, the battery scroll bars on your phone’s display will stop

scrolling. Ifyou wish toobtain 100%batterycapacity, please allow

another two hours to “trickle” or “maintenance” charge.

Standby and Talk Times

Digital

Talk Time

Analog

Talk Time

Battery Option

Standby Time

BLS-2 Extended

Battery Li-Ion

2 hrs to

2 hrs 55 min

40 min to

1 hr 25 min 10 to 15 hrs (ana)

70 to 110 hrs (dig)

900 mAh

(included with phone)

BMS-2S Extended

Battery NiMH

900 mAh

2 hrs to

2 hrs 55 min

40 min to

1 hr 25 min 10 to 15 hrs (ana)

70 to 110 hrs (dig)

BLS-4 Ultra Extended 3 hrs 20 min to 1 hr 10 min to 115 to 180 hrs (dig)

Battery Li-Ion

1500 mAh

4 hrs 50 min

2 hrs 25 min 15 to 23 hrs (ana)

Note: The times shown are approximate, and represent a range for

either standby or talk times (not a combination of both). Battery

operation times vary according to signal conditions, network

parameters set by the service provider, and how you use your

phone.

Note: Dispose of used batteries in accordance with any

local regulations

Chargers and Other Accessories

The following chargers and other accessories may be

available for your phone; please see your retailer for

details.

Standard Travel Charger

(ACP-7U) (included with phone)

This lightweight (187g) and

durable AC charger can be

used with all battery options.

To use the Standard Travel

Charger, plug it into a wall

outlet and connect the lead

from the charger to the base

of your phone. The charger can also be used together with

the Compact Desktop Charging Stand (DCH-8).

Rapid Travel Charger (ACP-9U)

This lightweight (100g) AC charger

can be used with all battery options.

Calls can be made during charging,

even with a fully discharged battery.

To use the Rapid Travel Charger

(ACP-9U), plug it into a standard

120V AC wall outlet, and connect the

lead from the charger to the base of

your phone.

The charger can also be used together with the optional

Compact Desktop Charging Stand (DCH-8). Approximate

charging times for discharged batteries are shown at the

beginning of this section.

Rapid Cigarette Lighter Charger (LCH-9)

You can charge

your phone’s

battery from your

vehicle battery by

using the Rapid

Cigarette Lighter

Charger (LCH-9).

Calls are possible during charging. A green light indicates

the charger is ready for charging (when not charging) or

finished charging (if it has been charging). The battery

charging times are the same as those for the Rapid Travel

Charger (ACP-9U)

The input voltage range is from 11 to 32V DC, negative

grounding. Avoid prolonged charging with the Rapid

Cigarette Lighter Charger (LCH-9) when the car engine is

not running; this may cause the battery of your car to

drain. Note also that in some cars the cigarette lighter

plug is not provided with electricity if the ignition is not

switched on.

Compact Desktop Charging Stand (DCH-8)

Used together with the

Standard Travel Charger

(ACP-7U) or the Rapid Travel

Charger (ACP-9U), the

Compact Desktop Charging

Stand (DCH-8) is an

economical choice when you

need your phone close at hand.

With the battery still attached, place your phone in the

charging stand to begin charging your phone’s battery.

Charging is indicated by the scrolling battery bars on the

right side of your phone’s display. When the scrolling

stops, the battery is approximately 80% charged.

To get a fully charged battery, leave your phone in the

charging stand for a couple of hours after the scrolling

stops.

7. Troubleshooting

What if charging fails?

If your phone displays Not charging, charging is

suspended. Make sure the battery is connected to an

approved charging device and that the battery is at room

temperature. Extreme temperatures, hot or cold, can

affect your battery’s performance and prevent charging.

If charging still fails, disconnect the charger from your

phone. Then reconnect the charger to your phone and

retry. If you still experience charging problems, contact

your service provider and, if necessary, bring your phone

in to have it serviced. Also remember to bring in your

battery and charger.

No service

If you’re outside the wireless service area, No service will

display on your phone. No calls can be made or received,

including emergency calls.

What if the call doesn’t go through?

Your phone can make and receive calls only when it’s

switched on and in the wireless network’s service area.

No service means that you’re probably outside the

wireless service area. No calls can be made or received.

See “Checking signal strength” on page 14.

Check call restrictions means calls to the phone number

you tried to call are restricted (see “Restrict calls” on

page 55), or your phone is locked (see “Phone lock” on

page 51).

Note:Checkwith yourserviceproviderforinformation about when

you need to dial a ‘1’ and/or an area code in addition to the number.

If you make a mistake dialing

Press Clear to delete the last character entered, or press

and hold Clear to delete all characters entered.

8. Reference Information

Important Safety Information

Traffic Safety

Do not use a hand-held telephone while driving a vehicle.

If using a hand-held phone park the vehicle before conversing.

Always secure the phone in its holder; do not place the phone on

the passenger seat or where it can break loose in a collision or

sudden stop.

The use of an alert device to operate a vehicle’s lights or horn on

public roads is not permitted.

Remember, road safety always comes first!

Operating Environment

Remember to follow any special regulations in force in any area

and always switch off your phone whenever it is forbidden to use

it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device,

read its user’s guide for detailed safety instructions. Do not

connect incompatible products.

As with other mobile radio transmitting equipment, users are

advised that for the satisfactory operation of the equipment and

for the safety of personnel, it is recommended that the equipment

should only be used in the normal operating position (held to your

ear with the antenna pointing over your shoulder).

Electronic Devices

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic equipment

may not be shielded against the RF signals from your wireless

phone.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation

of 6 inches (20 cm.) be maintained between a handheld wireless

phone and a pacemaker to avoid potential interference with the

pacemaker. These recommendations are consistent with the

independent research by and recommendations of Wireless

Technology Research.

Persons with pacemakers:

•

Should always keep the phone more than 6 inches (20 cm)

from their pacemaker when the phone is switched on;

•

Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimize the

potential for interference.

•

If you have any reason to suspect that interference is taking

place, switch off your phone immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing

aids. In the event of such interference, you may want to consult

your service provider.

Other Medical Devices

Operation of any radio transmitting equipment, including wireless

phones, may interfere with the functionality of inadequately

protected medical devices. Consult a physician or the

manufacturer of the medical device to determine if they are

adequately shielded from external RF energy or if you have any

questions. Switch off your phone in health care facilities when

any regulations posted in these areas instruct you to do so.

Hospitals or health care facilities may be using equipment that

could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles (e.g. electronic fuel

injection systems, electronic anti-skid (anti-lock) braking

systems, electronic speed control systems, air bag systems). Check

with the manufacturer or its representative regarding your

vehicle. You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted Facilities

Switch your phone off in any facility where posted notices so

require.

Potentially Explosive Atmospheres

Switch off your phone when in any area with a potentially

explosive atmosphere and obey all signs and instructions. Sparks

in such areas could cause an explosion or fire resulting in bodily

injury or even death.

Users are advised to switch off the phone while at a refueling

point (service station). Users are reminded of the need to observe

restrictions on the use of radio equipment in fuel depots (fuel

storage and distribution areas), chemical plants or where blasting

operations are in progress.

Areas with a potentially explosive atmosphere are often but not

always clearly marked. They include below deck on boats;

chemical transfer or storage facilities; vehicles using liquefied

petroleum gas (such as propane or butane); areas where the air

contains chemicals or particles, such as grain, dust or metal

powders; and any other area where you would normally be

advised to turn off your vehicle engine.

Vehicles

Only qualified personnel should service the phone, or install the

phone in a vehicle. Faulty installation or service may be dangerous

and may invalidate any warranty which may apply to the unit.

Check regularly that all wireless phone equipment in your vehicle

is mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive

materials in the same compartment as the phone, its parts or

accessories.

For vehicles equipped with an air bag, remember that an air bag

inflates with great force. Do not place objects, including both

installed or portable wireless equipment, in the area over the air

bag or in the air bag deployment area. If in-vehicle wireless

equipment is improperly installed and the air bag inflates, serious

injury could result.

Switch off your phone before boarding an aircraft. The use of

wireless telephones in an aircraft may be dangerous to the

operation of the aircraft, disrupt the wireless telephone network

and may be illegal.

Failure to observe these instructions may lead to the suspension

or denial of telephone services to the offender, or legal action, or

both.

Emergency Calls

IMPORTANT!

This phone, like any wireless phone, operates using radio signals,

wireless and landline networks as well as user-programmed

functions which cannot guarantee connection in all conditions.

Therefore, you should never rely solely upon any wireless phone

for essential communications (e.g. medical emergencies).

Remember, to make or receive any calls the phone must be

switched on and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone features

are in use. Check with local service providers.

Making an Emergency Call

1. If the phone is not on, switch it on

2. Key in the emergency number for your present loca-

tion (e.g. 911 or other official emergency number).

Emergency numbers vary by location.

3. Press

Ifcertain features are in use (keyguard, restrict calls, etc.), you may

first need to turn those features off before you can make an

emergency call. Consult this document and your local wireless

service provider.

When making an emergency call, remember to give all the

necessary information as accurately as possible. Remember that

your wireless phone may be the only means of communication at

the scene of an accident - do not cut off the call until given

permission to do so.

Radio Frequency (RF) Signals

Your wireless portable telephone is a low power radio transmitter

and receiver. When it is ON, it receives and also sends out radio

frequency (RF) signals.

In August, 1996, the Federal Communications Commission (FCC)

adopted RF exposure guidelines with safety levels for handheld

wireless phones. Those guidelines are consistent with safety

standards previously set by both U.S. and international standards

bodies:

ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*.

Those standards were based on comprehensive and periodic

evaluations of the relevant scientific literature. For example, over

120 scientists, engineers, and physicians from universities,

government health agencies and industry reviewed the available

body of research to develop the ANSI Standard (C95.1).

The design of your phone complies with the FCC and Industry

Canada guidelines (and those standards).

*American National Standards Institute, National Council on

Radiation Protection and Measurements; International

Commission on Non-Ionizing Radiation Protection.

Care and Maintenance

Your phone is a product of superior design and craftsmanship and

should be treated with care. The suggestions below will help you

to fulfill any warranty obligations and allow you to enjoy this

product for many years. When using your phone, battery, charger,

OR any accessory:

•

Keep it and all its parts and accessories out of small

children’s reach.

Keep it dry. Precipitation, humidity and liquids contain

minerals that will corrode electronic circuits.

Do not use or store it in dusty, dirty areas as its moving

parts can be damaged.

Do not store it in hot areas. High temperatures can shorten

the life of electronic devices, damage batteries, and warp or

melt certain plastics.

•

Do not store it in cold areas. When the phone warms up (to

its normal operating temperature), moisture can form inside

the phone, which may damage the phone's electronic circuit

boards.

•

Do not attempt to open it. Non-expert handling of the

device may damage it.

Do not drop, knock or shake it. Rough handling can break

internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or strong

detergents to clean it. Wipe it with a soft cloth slightly

dampened in a mild soap-and-water solution.

•

Do not paint it. Paint can clog the device’s moving parts and

prevent proper operation.

Use only the supplied or an approved replacement antenna.

Unauthorized antennas, modifications or attachments could

damage the phone and may violate regulations governing

radio devices.

•

If the phone, battery, charger, or any accessory is not work-

ing properly, take it to your nearest qualified service facility.

The personnel there will assist you, and if necessary, arrange

for service.

9. Technical Data

Wireless System

Weight

Dual-Band CDMA and AMPS

142.5g (5.0 oz.) with BLS-2

900 mAh Li-Ion Battery

Size

129 cc (7.9 cu. in.)

Frequency Range

Lowband

824.04 - 848.97 MHz (TX)

869.04 - 893.97 MHz (RX)

Highband

1850.04 - 1909.92 MHz (TX)

1930.08 - 1989.96 MHz (RX)

Battery Voltage

3.6 V nominal

850 mAh max.

Charging current

Operating Temperature

-30°C to + 60°C

(-22°F to + 140°F)

Number of Channels

832 lowband

1150 highband

Memory Locations

Memory Capacity

200

Alpha: 16 digits per location

Numeric: 32 digits per location

Data transmission

Fax

14.4k bps

Group 3 Send and Receive

(14.4k bps)

CANADA

NOKIA PRODUCTS LTD. – 575 Westney Rd. South,

Ajax, Ontario L1S 4N7. Tel: (905) 427-6654

1-888-22NOKIA (1-888-226-6542)

USA

NOKIA MOBILE PHONES – 6200 Courtney Campbell Causeway,

Suite 900, Tampa, FL 33607

Tel: 1-888-NOKIA2U (1-888-665-4228) (from the USA only)

TTY Users: 1-800-24NOKIA (1-800-246-6542) (from the USA only)

The information contained in this phone was written for dual-mode

CDMA and AMPS phones. The right to make changes and improvements

to any of the products described in this guide without prior notice is

reserved.

Nokia, Connecting People, the model 6188 and the Original Accessories

logos are trademarks of Nokia Corporation and/or its affiliates.

Issue No. 2 9352182

Printed in Canada

07/99

10. NOKIA 1- YEAR LIMITED

WARRANTY

NOKIA warrants that the NOKIA wireless phone and

accessories are free from defects in material and

workmanship. The warranty period for the Phone (Radio) units

and all accessories (excluding carry cases) is twelve (12)

months from the date of purchase OR fourteen (14) months

from date of wholesale shipment from NOKIA, OR fifteen

(15) months from the date of manufacture by NOKIA. The

warranty period for the Carry cases is three (3) months from

the date of purchase or five (5) months from the date of

wholesale shipment from NOKIA.

During the warranty period, NOKIA will, at its option, repair

or replace the defective product free of charge.

However, if NOKIA determines that the warranty conditions

cannot be applied, the purchaser will be billed for the repair

and shipping.

EXCEPTIONS

This warranty is subject to the following exceptions:

1. Mobile or fixed installation, which is not in accordance

with the installation instructions, published by NOKIA, will

void the warranty. Damage caused by a repair or an attempt

to repair by other than a service centre authorized by NOKIA

will void the warranty;

2. This warranty covers normal consumer use and does not

cover defects or damage to any product which, in NOKIA’s

sole opinion, has been subject to improper storage, liquid

damage, unauthorized modification, misuse, neglect, abuse,

misapplication, accident, alteration, improper installation,

maladjustment of consumer controls, or abnormal operating

conditions, or which has been attributable to acts of God;

3. Fuses are not covered by the warranty;

4. This warranty does not cover defects or damages caused by

a product which is not approved by NOKIA to be connected to

its wireless phone;

5. This warranty does not cover defects or damages caused by

improper or defective function of the carrier system or by

inadequate signal reception by the antenna;

6. Removal and reinstallation costs are not covered by this

warranty;

7. This warranty is applicable only to products sold and

bought in Canada or Bermuda;

8. Removal, alteration, or defacing of the Serial Number Plate,

or the accessory Date Code Labels will void the warranty.

In no event shall NOKIA be liable for incidental, special, or

consequential damages, direct or indirect, loss of

unanticipated benefits or profits, loss of use of its wireless

telephone, resulting from the use of its wireless phone, or its

accessories, or arising from any breach of this warranty.

CLAIM PROCEDURE

In order to obtain warranty performance, return the defective

unit to the NOKIA Service Centre with transportation charges

prepaid (Shipping of the repaired unit will be paid by NOKIA,

and NOKIA shall have risk of loss or damage during this

shipment).

The proof of date of purchase will be required before in-

warranty service is rendered.

Maintenance and service may be obtained in any authorized

service centre in Canada.

EXTENSION OF WARRANTY PERIOD

When a repair is made, an extra 90-day service warranty is

given to the labour and parts of the repair concerned. If

replacement of a faulty unit is applied, instead of repairing,

this 90-day service warranty is applied to the replaced unit.

Besides this 90-day service warranty, the warranty repairs or

replacements do not affect the original warranty conditions,

which are determined by the date of purchase.

THE FOREGOING WARRANTY IS THE PURCHASER’S SOLE AND

EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT

LIMITED TO ANY IMPLIED WARRANTY OR MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE OR USE.

Some provinces do not allow limitations on how long an

implied warranty lasts, so the above limitations may not apply

to you.

FOR WARRANTY SERVICE LOCATION, CONTACT YOUR SERVICE

PROVIDER/RETAILER/DEALER OR DIRECTLY TO:

NOKIA PRODUCTS LIMITED

575 Westney Road South

Ajax, Ontario L1S 4N7

For products being returned to NOKIA or its authorized service

centres, the service provider/retailer/dealer shall prepay

shipping charges, taxes, duties, insurance. NOKIA shall have

no risk for loss or damage during this shipment.

NOTE: As warranty is automatically registered, no further

action is required by the consumer.

11. Index

Calculator 19

Calendar 20

Call forwarding 22

Call log 23

Clearing call lists 28

Dialed calls 33

Missed calls 45

Received calls 54

Call restrictions 55

Call settings 24

Call timers 25

Access codes 17

Lock code 43

Security code 60

Accessories 72

Batteries 72

Chargers 74

Alarm Clock

Power off 18

Setting 17

All calls timer 18

Clearing call timers 28

Current call timer 31

Life timer 42

Call waiting 25

Caller ID 26

Calling card 26

Making calling card calls

Snooze 18

Alarm clock 17

All calls timer 18

Answering a call 15

Automatic answer 19

Automatic redial 19

Basics 13

Storing calling cards 26

Care and maintenance 81

Charging 3

Answering a call 15

Ending a call 14

Getting a strong signal

Chargers 74

When is a good time to

charge? 4

When is charging

complete? 4

Making a call 14

Switching phone on and

off 13

Batteries 72

Clear call lists 28

Clear timers 28

Clock 29

Alarm clock 17

Conference calls 30

Cool features 7

Alarm clock 17

Calendar 20

Attaching the battery 3

Charging the battery 3

Charging times 73

Discharging batteries 5

Important battery

information 6

Removing the battery 5

Standby and talk times

Call log 23

CLI ringing tones 32

Conference calls 30

Current call timer 31

Games 37

One-touch dialing 47

Profiles 53

Recalling numbers by

name 51

Keyguard 15

Activating Keyguard 15

Deactivating Keyguard

Keypad tones 40

Restrict calls 55

Text messages 62

Vibrating alert 68

Current call timer 31

Languages 41

Last number redial 41

Life timer 42

Lights 42

Data and fax calls 33

Dialed calls 33

Lock code 43

Changing your lock code

Phone lock 51

Earpiece volume 70

Editing

123 mode 36

ABC mode 35

Making a call 14

Making calling card calls 28

Manual touch tones 43

Memory status 44

Menu and submenu

numbering 10

Special characters 36

^{Emergency calls}³³, ⁷⁹

Emergency key 9 34

Ending a call 15

Entering letters and

numbers 35

Message alert tone 44

Messages 44

Microphone 45

Erasing names and numbers

Muting and unmuting 45

Missed calls 45

Fax and data calls 33

NAM Selection 46

NAM update 46

Network feature setting 46

Network services

Call Forwarding 22

Call Waiting 25

Caller ID 26

Conference calls 30

Text messages 62

Voice messages 69

Games 37

Getting connected 3

Inbox 39

In-call menu 40

One-touch dialing 47

Ready screen 8

Recalling names and

numbers 50

Paging 62

Recalling numbers by name

Received calls 54

Redialing

Last number redial 41

Reference information 77

Restoring factory settings

Restrict calls 55

Ringing options 58

Ringing tones 58

Ringing volume 70

Receiving a page 64

Phone book 49

Erasing names and

numbers 51

Recalling names and

numbers 50

Recalling numbers by

name 51

Scrolling view 59

Storing names and

numbers 50

Phone lock 51

Lock code 43

Unlocked phone number

Safety

At a glance 1

Phone settings 52

Profiles 53

Accessing profiles 53

Customizing profiles 53

Keypad tones 40

Lights 42

Message alert tone 44

Renaming profiles 54

Ringing options 58

Ringing tones 58

Ringing volume 70

Selecting profiles 53

Vibrating alert 68

Warning and game tones

Important safety

information 77

Using this guide 2

Scroll bar 9

Scroll key 9

Scrolling view 59

^{Security code}⁶⁰, ⁶¹

Changing your security

code 60

Security settings 61

Send caller ID 61

Setting time (manual) 29

Setting time (network) 30

Settings 61

Signal strength 13

Softkeys 8

Special characters (names)

Quick saving numbers 62

Special characters

(numbers) 37

Storing a calling card 27

Storing names and numbers

Vibrating alert 68

Voice messages 69

Greetings, passwords,

and prompts 69

Listening to your voice

messages 70

Quick save 62

Summary of menu items 11

Switching phone on and off

Synchronization 62

System Selection 62

Setting up your voice

mailbox 69

Volume 70

Earpiece volume 70

Ringing volume 70

Technical data 82

Text messages 62

Erasing text messages 64

Inbox 39

Receiving text messages

Warning and game tones 71

Welcome note 71

Touch tones 66

Manual touch tones 43

Touch tone length 65

Troubleshooting 76

Your phone A to Z 17

Unlocked phone number 67

Use number 24

Using your phone 8

Navigating tools 8

Menu and submenu

numbering 10

Scroll bar 9

Scroll key 9

Softkeys 8

NOTES

Transcend Information StoreJet TS500GSJ25M R User Manual
Seagate GoFlex STBL500100 User Manual
Samsung SGH I917ZKAATT User Manual
Samsung GH68 04620A User Manual
Salton ME8TDPW User Manual
Roberts Radio ELPDC04 User Manual
Pioneer DVR 112D User Manual
Philips CD 911 User Manual
Philips 32PW8521 User Manual
Nokia 6255 User Manual