Nokia 5180i User Manual

User Guide  
Keys  
Retractable  
antenna  
(pull here to  
extend)  
Power key  
Earpiece  
Current  
function of  
Navi™ key  
Screen  
Navi™ key  
Menu  
Scroll keys  
See p. 7.  
Clear key  
Voice mail  
key  
Number keys  
Special  
characters  
key  
Case key  
Emergency 9 key  
Indicators and icons  
Active call - A call is in progress.  
Alarm - The alarm clock is set.  
Keyguard - Keyguard is on. Your phone will  
not accept any key presses. To turn it off, press  
Unlock, then  
.
Letter mode (lower case) - Characters  
entered will be lower case letters. To switch to  
upper case letter mode, press  
to number mode, press and hold  
. To switch  
.
Letter mode (upper case) - Characters  
entered will be upper case letters. To switch to  
lower case letter mode, press  
.
Number mode - Characters entered will be  
numbers. (When entering letters, switch to  
number mode by pressing and holding  
.)  
Roaming - Your phone is roaming outside its  
home system.  
Silent tones - Tones are set to Silent. (Tones  
are turned off.)  
Special characters - Highlight a special  
character, then press Insert. (While entering  
letters, to switch to this mode, press  
.)  
Text entry (traditional) - The phone is ready  
for you to enter text.  
Text entry (predictive, lower case) - The  
phone is ready for you to enter lower case  
letters in the predictive text input mode.  
Text entry (predictive, sentence case) - The  
phone is ready for you to enter letters in the  
predictive text input mode. The first letter of  
the first word in each sentence will be upper  
case.  
Text message - You have one or more new  
text messages.  
Voice message - You have one or more new  
voice messages. To call your voicemail box,  
press and hold  
.
Contents  
1. For your safety  
1
FCC/Industry Canada Notice . . . . . . . . . . . . . . 2  
Using this Guide . . . . . . . . . . . . . . . . . . . . . . . . 2  
2. Battery installation and charging  
Attaching the battery . . . . . . . . . . . . . . . . . . . . 3  
Battery charging . . . . . . . . . . . . . . . . . . . . . . . . 3  
Removing the battery . . . . . . . . . . . . . . . . . . . . 5  
Important battery information. . . . . . . . . . . . . 5  
3
3. About the phone, keys and menu  
Power key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Nokia Navi™ key . . . . . . . . . . . . . . . . . . . . . . . . 6  
Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Scroll keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Clear key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
External antenna jack. . . . . . . . . . . . . . . . . . . . 7  
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Entering letters and numbers. . . . . . . . . . . . . .11  
Special characters in names . . . . . . . . . . . . 12  
Special characters in phone numbers . . . . 12  
Keyguard (locking the keypad). . . . . . . . . . . . 13  
6
4. Basic functions  
15  
Turning the phone on . . . . . . . . . . . . . . . . . . . 15  
Turning the phone off. . . . . . . . . . . . . . . . . . . 15  
About the antenna . . . . . . . . . . . . . . . . . . . . . 15  
Checking signal strength . . . . . . . . . . . . . . . . 15  
Making a call. . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Volume adjustment (earpiece) . . . . . . . . . . . . 16  
Muting the microphone . . . . . . . . . . . . . . . . . 16  
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Last number redial . . . . . . . . . . . . . . . . . . . . . 17  
i
Saving a name and number . . . . . . . . . . . . . . 17  
Finding a name and number . . . . . . . . . . . . . 17  
Answering a call . . . . . . . . . . . . . . . . . . . . . . . 17  
Silencing an incoming call . . . . . . . . . . . . . . . 17  
5. Phone book  
19  
Saving names and numbers . . . . . . . . . . . . . . 19  
Saving email addresses. . . . . . . . . . . . . . . . . . 19  
Finding names and numbers . . . . . . . . . . . . . 20  
Editing names and numbers. . . . . . . . . . . . . . 21  
Erasing names and numbers. . . . . . . . . . . . . . 21  
Finding your own number . . . . . . . . . . . . . . . 21  
Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Checking available memory . . . . . . . . . . . . . . 21  
6. Settings  
22  
Automatic redial . . . . . . . . . . . . . . . . . . . . . . . 22  
Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Quick alert settings . . . . . . . . . . . . . . . . . . . 25  
Voice mailbox number . . . . . . . . . . . . . . . . . . 26  
Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . 26  
7. Emergency calls  
27  
Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . 28  
8. Advanced functions 29  
Network feature setting . . . . . . . . . . . . . . . . . 29  
Adding feature activation codes  
to the menu . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Adding feature cancellation codes  
to the menu . . . . . . . . . . . . . . . . . . . . . . . . . 29  
In-call menu . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Making/receiving multiple calls. . . . . . . . . . . 30  
ii  
Calling cards . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Call forwarding . . . . . . . . . . . . . . . . . . . . . . . . 33  
Voice privacy . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
1-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . 34  
Choosing your phone number  
(NAM selection). . . . . . . . . . . . . . . . . . . . . . . . 35  
Send own caller ID with next call . . . . . . . . . 36  
NAM update . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
System selection . . . . . . . . . . . . . . . . . . . . . . . 37  
Anykey answer. . . . . . . . . . . . . . . . . . . . . . . . . 39  
Automatic answer. . . . . . . . . . . . . . . . . . . . . . 39  
Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Downloadable ringing tones . . . . . . . . . . . . . 41  
Restore factory settings . . . . . . . . . . . . . . . . . 41  
9. Call log  
42  
Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Received calls . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Clearing call lists. . . . . . . . . . . . . . . . . . . . . . . 43  
Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
10. Voice messages  
45  
Saving your voice mailbox number . . . . . . . . 45  
Listening to new voice messages. . . . . . . . . . 45  
Calling your voice mailbox at any time. . . . . 46  
11. Mobile messages  
47  
About mobile messages . . . . . . . . . . . . . . . . . 47  
Receiving a mobile message. . . . . . . . . . . . . . 49  
Creating, addressing, and sending  
a number only message . . . . . . . . . . . . . . . . . 50  
Creating a text message. . . . . . . . . . . . . . . . . 51  
Addressing a text message. . . . . . . . . . . . . . . 53  
Entering text into a message . . . . . . . . . . . . . 54  
iii  
Sending a message . . . . . . . . . . . . . . . . . . . . . 58  
Resending a message . . . . . . . . . . . . . . . . . . . 59  
Forwarding a message . . . . . . . . . . . . . . . . . . 59  
Erasing messages . . . . . . . . . . . . . . . . . . . . . . 60  
12. Extra features  
61  
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
13. Security features  
63  
Access codes overview . . . . . . . . . . . . . . . . . . 63  
Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Security code . . . . . . . . . . . . . . . . . . . . . . . . 63  
Restricting calls. . . . . . . . . . . . . . . . . . . . . . . . 63  
Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
14. Accessories  
68  
Nokia Xpress-on™ color covers . . . . . . . . . . . 69  
Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Chargers and other accessories . . . . . . . . . . . 72  
15. Reference information  
76  
Important safety information. . . . . . . . . . . . . 76  
Emergency calls. . . . . . . . . . . . . . . . . . . . . . . . 78  
Radio frequency (RF) signals . . . . . . . . . . . . . 79  
Care and maintenance . . . . . . . . . . . . . . . . . . 81  
16. Technical information  
17. Nokia One-Year Limited Warranty  
18. Index  
82  
83  
87  
iv  
1. For your safety  
Read these simple guidelines before using your phone.  
Failure to comply with these guidelines may be dangerous  
or illegal.  
Road Safety Comes First  
Don’t use a hand-held phone while driving; park the  
vehicle first.  
Switch Off In Hospitals  
Follow any regulations or rules. Switch phone off near  
medical equipment.  
Switch Off On Aircraft  
Wireless phones can cause interference. Using them on  
aircraft is illegal.  
Switch Off When Refueling  
Don’t use phone at a refueling point. Don’t use near fuel or  
chemicals.  
Switch Off Near Blasting  
Do not use the phone where blasting is in progress.  
Observe restrictions, and follow any regulations or rules.  
Interference  
All wireless phones may get interference which could  
affect performance.  
Use Sensibly  
Use only in the normal position (to ear). Don’t touch the  
antenna unnecessarily.  
Qualified Service  
Only qualified service personnel must install or repair  
equipment.  
Accessories and Batteries  
Use only approved accessories and batteries. Do not  
connect incompatible products.  
1
FCC/Industry Canada Notice  
Your phone may cause TV or radio interference (for example,  
when using a telephone in close proximity to receiving  
equipment). The FCC or Industry Canada can require you to  
stop using your telephone if such interference cannot be  
eliminated. If you require assistance, contact your local  
service facility.  
This device complies with part 15 of the FCC rules. Operation  
is subject to the condition that this device does not cause  
harmful interference.  
Using this Guide  
The wireless phone described in this guide is approved for  
use in AMPS 800 and CDMA 800 networks.  
Network services  
A number of features included in this guide are called network  
services. They are special services provided by wireless service  
providers. Before you can take advantage of any of these  
network services, you must subscribe to the service(s) from your  
home service provider and obtain instructions for their use.  
Updates  
The latest version of this Owner’s Manual may be found on  
Nokia’s World Wide Web site at www.nokiaUSA.com.  
2
2. Battery installation and  
charging  
Before you can use your new phone, you need to attach and  
charge the battery.  
Attaching the battery  
To attach the battery, place it  
on the back of the phone as  
shown and slide it toward the  
top of the phone until it clicks  
into place.  
Battery charging  
Several rechargeable batteries are available for use in your  
phone. Note that a new NiMH battery’s full performance is  
achieved only after two or three complete charge and  
discharge cycles (see “Charging times” on page 71).  
How to charge your battery  
Connect the lead from the charger to the bottom of your  
phone or to a charging stand. Then plug the charger into a  
standard wall outlet.  
When the battery is charging, the battery strength indicator  
on the right side of the screen scrolls upwards.  
Note: When you charge the battery for the first time, the  
battery strength indicator will not scroll the entire time; this  
is normal.  
3
Problems charging  
If your phone displays Not charging, charging is suspended.  
Check that the battery is connected to an approved charging  
device. If the battery is very hot or cold, wait for a while;  
charging will automatically resume after the battery is  
restored to its normal operating state. If charging still fails,  
contact your dealer.  
When is charging complete?  
When the battery strength indicator stops scrolling,  
your phone is considered fully charged. However, a  
slight increase in charge may occur if you leave your  
phone connected to the charger.  
If you charge the battery while the phone is turned  
off, the charge bars on the right side of the display will  
eventually disappear once a full charge has occurred.  
Note: If you are using a lithium ion battery, continue to charge  
it for two hours after the indicator has stopped scrolling to  
retain “trickle charge.  
When is a good time to charge?  
You can charge anytime, but remember that when your phone  
displays Battery low, you only have a couple of minutes of  
talk time left.  
Can I make calls while charging?  
Yes, but your battery may not charge during a call. Charging  
should resume once you end the call.  
Discharging NiMH batteries  
For good operation times, discharge NiMH batteries from time  
to time by leaving your phone switched on until it turns itself  
off (or by using the battery discharge facility of any approved  
accessory available for your phone). Do not attempt to  
discharge the battery by any other means.  
4
Removing the battery  
Note: Switch off the phone before removing the battery!  
1
Press and hold the  
button at the top of the  
battery.  
2
3
Slide the battery toward  
the bottom of the phone.  
Lift the battery off the  
phone.  
Important battery information  
The battery can be charged and discharged hundreds of times  
but it will eventually wear out. When the operating time (talk  
time and standby time) is noticeably shorter than normal, it is  
time to buy a new battery.  
Use only batteries approved by the phone manufacturer and  
recharge your battery only with the chargers approved by the  
manufacturer. When a charger is not in use, disconnect it from the  
power source. Do not leave the battery connected to a charger for  
longer than a week, since overcharging may shorten its life. If left  
unused a fully charged battery will discharge itself over time.  
Temperature extremes will affect the ability of your battery to  
charge: allow it to cool down or warm up first.  
Use the battery only for its intended purpose.  
Never use any charger or battery which is damaged or worn out.  
Do not short circuit the battery. Accidental short circuiting can  
occur when a metallic object (coin, clip, or pen) causes direct  
connection of the + and - terminals of the battery (metal strips  
on the back of the battery), for example when you carry a spare  
battery in your pocket or purse. Short circuiting the terminals  
may damage the battery or the connecting object.  
Leaving the battery in hot or cold places, such as in a closed car  
in summer or winter conditions, will reduce the capacity and  
lifetime of the battery. Always try to keep the battery between  
59º F and 77º F (15º C and 25º C). A phone with a hot or cold  
battery may temporarily not work, even when the battery is fully  
charged. NiMH batteries’ performance is particularly limited in  
temperatures below 14º F (-10º C). Li-Ion batteries’ performance  
is particularly limited in temperatures below 32º F (0º C).  
Do not dispose of batteries in a fire!  
Dispose of used batteries in accordance with any local regulations.  
5
3. About the phone, keys and  
menu  
Power key  
You can use the power key  
to:  
turn the phone on or off (press and hold)  
turn the phone’s lights on for 30 seconds  
select a quick alert setting (see page 25) (if Keyguard is  
off and the phone is not connected to a headset or other  
handsfree device.)  
For more information on Keyguard, see ‘Keyguard (locking  
Nokia Navi™ key  
Your phone’s Navi™ key  
appears  
below the screen. Its current function  
is indicated by the word that appears  
above it (for example, Menu). Simply  
press the Navi™ key to perform the  
function.  
Throughout this guide, when you see “press Menu,” “press  
Listen,” etc., press the Navi™ key when that word appears  
above it.  
Start screen  
The start screen appears when you first  
turn on your phone. Menu appears above  
the Navi™ key so you can access your  
phone’s menu. Several features can be  
used only when the phone is at the  
start screen.  
To get to the start screen, press and hold  
(If there are characters on the screen this clears the characters,  
then you must press and hold again.)  
for a second.  
6
   
Scroll keys  
The scroll keys  
are located to the right of the  
Navi™ key. Use the scroll keys to:  
browse menus  
move the cursor (see page 11) to the right or the left  
adjust the earpiece volume while in a call  
access your phone book (press  
access the dialed calls list (press  
from the start screen)  
from the start screen)  
For more information about the start screen, see ‘Menu’ on  
Clear key  
Use the clear key  
to:  
delete a character to the left of the cursor  
clear all characters from the screen (press and hold)  
return to the previous menu level  
return from the menu to the start screen (press and hold)  
access the in-call menu while in a call (see ‘In-call menu’  
Lights  
To turn your phone’s lights on for 30 seconds:  
if Keyguard is off, press any key  
if Keyguard is on, press the  
key briefly  
For information about controlling your phone’s lights when  
the phone is connected to a handsfree device, see page 23.  
External antenna jack  
At the back of the phone, below the antenna, there is a con-  
nector for an external antenna. The connector may be protected  
by a rubber cap. Remove the cap before connecting an external  
antenna. After removing the antenna, replace the cap.  
Warning: Keep the cap out of the reach of small children.  
7
   
Menu  
Using your phone’s menu you can easily access the many  
powerful features in your phone.  
Scroll bar  
When you use your phone’s menu, a scroll bar  
appears at the far right of the screen. This bar  
indicates where you are in the menu; each tab  
location on the bar represents a different menu  
item.  
For example, press Menu once. The scroll bar appears with  
the first (top) tab displayed. A different tab appears each  
time you press  
or  
.
Help text  
Many menu items have brief help text. To view the help text,  
scroll to the menu item and wait for approximately 10 seconds  
for the text to appear. Press More or  
to see the next  
page of text,  
to see the previous page, or to  
return to the menu.  
8
 
Menu shortcuts  
When you select a menu item, numbers appear on  
the screen above the scroll bar. If you become  
familiar with these numbers, you can use them as  
shortcuts for accessing different menu items. For  
example, to access the Phone settings menu, you  
can simply press Menu 4 2. The phone displays the first item  
in that menu, Touch tones.  
Note: (1) Menu items in your phone vary depending on the  
network and accessories used. (2) This is not a complete list;  
see entries about individual features for more information.  
1 Phone book  
11 Search  
12 Add new  
13 Edit  
3 Call log  
31 Missed calls  
32 Received calls  
33 Dialed calls  
34 Clear call lists  
14 E-mail  
341 All  
15 Options  
342 Missed  
343 Received  
344 Dialed  
151 Scrolling view  
152 Memory status  
16 1-touch dialing  
35 Call timers  
17 Erase  
351 Last call  
352 All calls  
353 Life timer  
354 Clear timers  
171 One by one  
172 Erase all  
18 Own number  
2 Messages  
21 Text messages  
211 Write newO  
212 Inbox  
213 OutboxO  
214 Saved  
215 Erase  
22 Voice messages  
221 Listen to voice  
messages  
222 Voice mailbox  
number  
23 Welcome note  
9
4 Settings  
7 Clock  
71 Alarm clock  
41 Call settings  
411 Emergency key 9  
412 Automatic redial  
72 Clock settings  
721 Display/Hide clock  
722 Time settings  
723 Time format  
413 Calling card  
414 Automatic answerA  
415 Anykey answer  
8 Tones  
42 Phone settings  
421 Touch tones  
422 Restore factory settings  
423 Language  
81 Ringing options  
811 Ring  
812 Ascending  
813 Ring once  
814 Beep once  
815 Silent  
424 LightsA  
43 Security settings  
431 Restrict calls  
432 Access codes  
82 Ringing tone  
44 Network services  
83 Ringing volume  
441 Voice privacyO  
442 Call forwardingM  
443 Call waitingM  
831 Level 1  
832 Level 2  
833 Level 3  
834 Level 4  
835 Level 5  
444 Send caller IDM  
445 Network feature setting  
446 NAM selection  
447 NAM updateO  
84 Message alert tone  
841 No tone  
842 Standard  
843 Special  
844 Beep once  
845 Long & loud  
5 System  
(Depends on service provider; any  
of the following items may appear.)  
<carrier’s name>  
Automatic  
Automatic A  
Automatic B  
Home only  
Analog  
85 Keypad tones  
851 Off  
852 Level 1  
853 Level 2  
854 Level 3  
86 Warning and game  
tones  
861 On  
862 Off  
6 Games  
61 Memory  
62 Snake  
63 Logic  
9 Keyguard  
A
Depends on accessory; see entry for this feature  
M
Must be added to the menu manually; see ‘Network feature setting’  
O
Depends on network or operator  
10  
Entering letters and numbers  
Cursor  
The cursor is a blinking vertical line that appears on the  
screen when you are entering text or numbers. Characters  
you enter appear to the right of the cursor. Press  
delete the character to the left of the cursor. Use  
to move the cursor to the right or left.  
to  
and  
ABC mode  
When your phone is ready for you to enter text, such as a  
name or message, it switches to ABC mode. The  
shows that it is in ABC mode.  
icon  
When  
is displayed, you can enter these characters by  
pressing the indicated key repeatedly:  
Key  
1
Characters  
. , ‘ ? ! - 1  
ABC2  
Key  
7
Characters  
PQRS7  
2
8
TUV8  
3
DEF3  
9
WXYZ9  
space, 0  
4
GHI4  
0
5
JKL5  
See ‘Special  
characters in  
6
MNO6  
Changes letter case,  
switches between  
letters and numbers  
Note: After you enter a character, press down on the scroll  
key to move the cursor over quickly.  
11  
   
Changing letter case  
Press the  
key (the Case key, shown on the phone diagram  
on this guide’s inside front cover) to switch between upper-  
and lower-case letters. The  
icon switches to  
to  
indicate that you are using lower case.  
Entering numbers  
To enter numbers while in ABC mode, you can:  
press and hold the corresponding key until the number  
appears, or  
switch between ABC mode and number mode by pressing  
and holding  
.
Special characters in names  
In ABC mode you can press  
(the Special characters key,  
shown on the phone diagram on this guide’s inside front cover)  
to view the special characters below. You can use these  
characters when saving names in your phone book. Simply  
press  
or  
to highlight the one you want, then press  
Use.  
. , ? @ ! : ; - + # * ( ) ‘ “ _ & $ £ % / > ¿ ¡ § = [ ] ¥  
Tip: To choose a character that appears near the end  
of the list, immediately press  
to go to the end of  
the list.  
Special characters in phone numbers  
You can use special characters to dial or save phone numbers  
of automated services such as bank account information.  
When entering numbers, press  
the character you want.  
repeatedly until you see  
Character  
Use  
*
This character is used to request services  
from the network. Contact your service  
provider for details.  
+
This character is not currently used.  
12  
   
Character  
p
Use  
This character creates a pause. Digits to the  
right of the p are sent as touch tones after a  
2.5-second pause.  
Use this character to save phone numbers of  
automated services that require you to enter  
a password or other information after the  
call is answered. For example, if your voice  
mail number at work is 555-1212 and you  
need to enter your extension (1234) and  
then a password (5678) in order to listen to  
your messages, you could save this phone  
number as 5551212p1234p5678.  
w
This character creates a wait. It works  
similarly to the pause character except that  
digits to the right of the w are not sent until  
you press Send.  
Keyguard (locking the keypad)  
Using the Keyguard feature you can  
“lock” your phone’s keypad so that  
accidental keypresses have no effect.  
This is handy when your phone is in a  
pocket or purse.  
Note: Keyguard is not a security feature and will not prevent  
unauthorized use of your phone.  
To lock the keys  
Press Menu 9 or Menu  
.
To unlock the keys  
Press Unlock  
.
13  
 
Notes about Keyguard  
When Keyguard is on, the only way to answer a call is to  
press Answer. Once the call is terminated, keyguard is  
reactivated.  
When Keyguard is on, press the power key briefly to turn  
your phone’s lights on for 30 seconds.  
When Keyguard is on, calls may be possible to the emergency  
number programmed into your phone (e.g. 911 or other  
official emergency number). However, one-key emergency  
dialing (‘the 9 key’) does not operate.  
Note: When Keyguard is active, the only way to make an  
emergency call is to dial the emergency number, then  
press Call.  
Keyguard is automatically turned off when the phone  
is connected to a handsfree device. Once the phone is  
disconnected from the handsfree device, keyguard is  
reactivated.  
14  
4. Basic functions  
Turning the phone on  
Press and hold  
for one second.  
Note: Pressing  
briefly turns your phone’s lights on for  
fifteen seconds.  
If the phone asks for a lock code, see ‘Lock code’ on page 63.  
If the phone asks for a security code, see ‘Security code’ on  
WARNING! Do not switch on the phone when wireless phone  
use is prohibited or when it may cause interference or danger.  
Turning the phone off  
If Keyguard is off, press and hold  
for one second.  
.
To deactivate Keyguard, press Unlock  
About the antenna  
Your Nokia phone has a retractable antenna. For best  
performance, fully extend the antenna during use.  
Normal position  
Hold the phone as you would any other telephone, with the  
antenna pointed up and over your shoulder.  
Tips on efficient operation  
As with any other radio transmitting device, do not touch  
the antenna unnecessarily when the phone is switched on.  
Contact with the antenna affects call quality and may cause  
the phone to operate at a higher power level than otherwise  
needed.  
Checking signal strength  
Your phone operates on radio waves. Radio signal coverage  
is maintained by a wireless network, and the quality of calls  
on your phone depends on the strength of the wireless radio  
signal.  
15  
 
Get a strong signal  
When you are at the start screen or in a call, the  
strength of the radio signal is indicated by the  
signal strength indicator on the left side of your  
phone’s screen. This indicator scrolls up and down  
as the signal strength increases and decreases.  
To improve your phone’s reception, try moving your phone  
slightly. If you’re inside a building, move toward a window.  
Making a call  
1
Enter the area code and phone  
number. (Menu changes to Call.)  
2
Press Call and wait for the other  
party to answer.  
Volume adjustment (earpiece)  
To adjust the earpiece volume, press  
or  
during a call.  
If an accessory with its own loudspeaker is connected to your  
phone, the scroll keys adjust the volume for that accessory.  
Muting the microphone  
When you are in a call, you can mute the phone’s microphone  
by pressing  
, pressing Options, and selecting Mute. To  
unmute the microphone, press  
, press Options, and  
select Unmute.  
Ending a call  
Press End. During the call, if you entered any characters  
(for example, if you entered a few numbers to communicate  
with an automated attendant), the characters will remain  
on the screen. To clear them, press and hold  
.
16  
 
Last number redial  
The last 10 numbers you dialed are stored in the dialed calls  
list. Use this list to redial a number you have called recently.  
1
From the start screen, press  
calls list.  
to access the dialed  
2
3
Scroll to the desired number.  
Press Call.  
Saving a name and number  
Finding a name and number  
1
2
Press  
to access your phone book.  
Scroll to the number you want. (To skip ahead quickly in  
the list, press the number key that corresponds to the  
first letter of the name. For example, if you want to call  
your friend Katy, press the 5 key twice, quickly; once for  
the letter j, and once for the letter k.)  
3
Press Call.  
For other ways to find names and numbers, see ‘Finding  
Answering a call  
When someone calls, the phone alerts you (see ‘Tones’ on  
page 23) and Call flashes on the screen. To answer the call,  
press any key except  
.
Silencing an incoming call  
To silence the ringing of the incoming call, press  
briefly.  
You can still answer the call if Call or the name of the person  
is still flashing on your screen.  
Note: To prevent accidental answering when the phone is in  
a pocket or purse, the phone will not answer the call if you  
press the key for longer than one second.  
For information on setting your phone to answer incoming  
calls automatically, see ‘Anykey answer’ on page 39.  
17  
 
Caller ID  
Caller ID is a network service that displays the phone number  
of the person calling you, if it is available. Check with your  
service provider for details.  
If the caller can be identified, the phone  
displays the caller's phone number and  
calling. If the number matches a name  
saved in your phone book, the name is  
displayed instead. However, if the last  
seven digits of the phone number match more than one name  
in the phone book, only the phone number is displayed.  
18  
5. Phone book  
For convenient and easy dialing, you can save 99 phone  
numbers and associated names in your phone.  
Saving names and numbers  
Saving a name and number is easy!  
Just enter the phone number, press  
or  
, then press Save. Enter a  
name if you wish, then press OK.  
Saving a number quickly  
To save a number quickly, enter the phone number, press  
or  
, then press and hold Save. The number is saved  
to your phone book and you can add a name to it later  
Saving a name and number while in a call  
To save a name and number while in a call, press Options,  
scroll to Phone book, scroll to Add new, enter a number and  
name if you like, and press OK.  
Notes about saving names  
A name may appear only once in memory. If you try to  
save a name that already exists in memory, the phone  
asks if you want to replace the existing name.  
If you try to save a phone number and your phone book  
is full, you are given the option to replace an existing  
entry. Scroll to the entry you want to replace and press  
OK, or press  
to cancel.  
Saving email addresses  
You can associate an email address with each entry in your  
phone book. Later, when addressing a text message, you can  
quickly enter the email address by selecting a name in your  
phone book. (The ability to send a text message depends on  
the arrangement you make with your service provider.)  
19  
 
To save an email address, press Menu 1 4 (Phone book -  
E-mail). Press Select. Scroll to a phone book entry. Press  
Edit e-mail. Enter the email address, then press OK.  
The presence of an email symbol (@) in the top right corner  
of the screen indicates that an email address is associated  
with the selected entry.  
Finding names and numbers  
There are several ways to find names and numbers in your  
phone book.  
From the start screen  
Press  
to access your phone book, then scroll to the desired  
name/number.  
Tip: You can also press the number key that corresponds  
to the first letter of the name. (To skip ahead quickly  
in the list, press the number key that corresponds to  
the first letter of the name. For example, if you want  
to call your friend Katy, press the 5 key twice, quickly;  
once for the letter j, and once for the letter k.) The first  
matching entry is displayed at the top of the screen.  
Using the Phone book menu  
Press Menu 1 1, enter the first few  
letters of the name, then press OK.  
Your phone displays the first matching  
entry at the top of the screen.  
While performing other functions  
Say you want to forward your phone  
calls to a number that is saved in your  
phone book. When you are prompted  
to enter the phone number, you can  
find it instead—simply press Search to  
access your phone book.  
20  
 
Editing names and numbers  
To edit phone book entries, press Menu 1 3, scroll to the  
entry you want to edit, then press Edit. Edit the name and  
number as needed.  
Erasing names and numbers  
Use Menu 1 7 to erase entries from your phone book. One  
by one lets you select one entry at a time to be erased.  
Erase all erases your entire phone book (you are required  
to enter your security code first).  
Finding your own number  
Use Menu 1 8 to view your phone’s number.  
Scrolling view  
Use Menu 1 5 1 to choose a scrolling view for your phone  
book (Name list, Name+number, or Name only).  
Tip: If you’re viewing your phone book and scrolling  
view is set to Name list or Name only, you can view  
the phone number associated with a name by pressing  
and holding  
.
Checking available memory  
Use Menu 1 5 2 to see how many memory locations are free  
and how many are being used. (Each memory location holds  
one phone number and associated name.)  
21  
 
6. Settings  
This section describes some phone settings that allow you to  
customize your phone to suit your preferences and that you  
probably won’t change very often.  
Automatic redial  
Use Menu 4 1 2 to turn this feature on or off. When this  
feature is on and the wireless network is busy, your phone  
redials a number up to three times. This feature does not  
redial to a busy phone number.  
To stop the call attempts, press Quit or  
.
Clock  
Your phone has an internal clock that  
can be displayed on the start screen.  
If you remove the battery for longer  
than a couple of seconds, the time is  
lost. The next time you turn on the  
phone, you will be asked to enter the time.  
Setting the time using the network  
To set the time on your phone using the network (the default  
setting), use Menu 7 2 2 1. If your phone is unable to get the  
time from the network, you are prompted to enter the time  
manually. (For example, your phone may not be able to get  
the time from the network if you don’t have digital coverage.)  
Setting the time manually  
Use Menu 7 2 2 2 to enter the current time. Use two digits  
for both hours and minutes (for example, enter 1:30 as  
0130). If the clock’s time format is set to am/pm, you are  
asked to choose am or pm.  
Note: Pressing  
does not work on this screen. If you  
make a mistake, re-enter all four digits.  
22  
 
Selecting time format  
Use Menu 7 2 3 to set the clock’s format to am/pm or  
24-hour.  
Displaying or hiding the clock  
Press Menu 7 2 1 to display the clock on the phone’s screen  
if it is currently hidden, or vice versa.  
When the clock is displayed and the time  
(a.m.)  
(p.m.)  
03:15  
03:15  
format is set to am/pm, a black square  
appears next to the time indicating  
a.m. or p.m.  
Language  
Use Menu 4 2 3 to set the language  
of your phone’s screen. You can  
choose from English, French,  
Spanish, Portuguese, and Hebrew.  
The shortcut for choosing English is to  
press Menu 4 2 3 1.  
Lights  
If you’re using your phone with a handsfree device, your phone’s  
lights turn on and remain on automatically. Use Menu 4 2 4 to  
set your phone’s lights to Automatic (after 30 seconds, the  
lights turn off until the next key is pressed, phone rings, etc.).  
For information about turning your phone’s lights on at any  
Tones  
Use Menu 8, Tones, to change the six sound settings in your  
phone: ringing option, ringing tone, ringing volume, message  
alert tone, keypad tones, and warning and game tones.  
Using the quick alert settings feature (see page 25) you can  
select a fixed combination of these settings to suit your  
current environment.  
23  
   
Ringing option  
Use Menu 8 1 to tell your phone how to notify you that you  
have a call.  
Note: If you choose Beep once or Silent, the alarm clock  
only sounds a quiet beep.  
Ring The phone rings normally using the currently selected  
ringing tone.  
Ascending The phone rings using the currently selected  
ringing tone. The ringing volume starts low and increases to  
selected volume with successive rings.  
Ring once The phone rings once using the currently selected  
ringing tone.  
Beep once The phone beeps once.  
Silent The phone makes no sound when you receive a call.  
The  
icon appears on the start screen.  
Ringing tone  
If your ringing option is set to Ring once, your phone plays a  
ringing tone when someone calls you. Use Menu 8 2 to choose  
one of 40 ringing tones. Scroll to a tone to hear how it sounds.  
Note: If the ringing option is set to Silent or Beep once, the  
phone won’t play sample tones.  
Ringing volume  
Use Menu 8 3 to control the volume of  
your phone’s ringing and of message  
alert tones.  
Message alert tone  
Use Menu 8 4 to choose the tone played when you receive a  
mobile message. Scroll to a tone to hear how it sounds.  
Keypad tones  
Use Menu 8 5 to adjust the volume of the tones your phone  
makes when you press its keys.  
24  
   
Warning and game tones  
Use Menu 8 6 to turn your phone’s warning and game tones  
on or off. Warning tones are created by events such as  
confirmations, errors, power on, battery low, and recharge  
battery.  
Vibrating alert  
If a vibrating battery is attached to your phone, it will vibrate  
when you receive a voice call, even if the ringing option is  
set to Silent.  
Note: The battery does not vibrate while your phone is connected  
to (or placed in) a charging device or connected to a handsfree  
device.  
Quick alert settings  
You can quickly adjust your phone’s  
sound settings when you go into a  
meeting, go outdoors, etc. To choose  
a quick alert setting, briefly press  
scroll to the setting you want, then  
press OK.  
,
Note: You can only access your phone’s quick alert settings  
from the start screen.  
Tip: Instead of using the scroll keys, you can press  
repeatedly to scroll through this menu. After you reach  
the setting you want, press and hold  
.
Note: If you choose Silent or Quiet, the alarm clock only  
sounds a quiet beep.  
Normal Your phone uses the settings you made in Menu 8,  
Tones.  
Silent All sound is turned off in your phone. The  
icon  
appears on the start screen.  
Quiet Your phone beeps once when you receive a call or  
mobile message. Other tones are turned off.  
Loud Your phone rings loudly. Keypad tones, message alert  
tone, and warning tones are also loud.  
25  
 
Headset Your phone automatically selects this when it is  
connected to a headset. Your phone remembers any changes  
you make to settings in Menu 8, Tones, and uses them the  
next time you connect the phone to a headset.  
Handsfree Your phone automatically selects this when it is  
connected to a handsfree device. Your phone remembers any  
changes you make to settings in Menu 8, Tones, and uses them  
the next time you connect the phone to the device.  
Note: If the Silent, Quiet, or Loud quick alert setting is chosen  
and you change a setting in Menu 8, Tones, your phone switches  
the current quick alert setting to Normal.  
To return to the start screen, press  
.
Voice mailbox number  
If you have a voice mail subscription, use Menu 2 2 2 to save  
the voice mailbox number given to you by your service provider.  
This number may be up to 32 digits long. Once you save  
your voice mailbox number, you can press and hold  
3 seconds to dial your voice mailbox. (You can also press  
briefly and then press Call.)  
for  
For more information, see ‘Voice messages’ on page 45.  
For any questions about your voice mail, contact your  
service provider.  
Welcome note  
Use Menu 2 3 to create or change the  
welcome note for your phone. This note  
is displayed briefly each time you turn  
on your phone. It can be your name, a  
reminder, etc. To save the note, press  
Options, then Save. To erase the note, press Options,  
then Erase.  
26  
 
7. Emergency calls  
1
If the phone is not on, switch it on.  
2
Press and hold  
phone for calls.  
for several seconds to ready the  
3
4
Key in the emergency number for your present location  
(e.g. 911 or other official emergency number). Emergency  
numbers vary by location.  
Press Call.  
IMPORTANT!  
This phone, like any wireless phone, operates using radio signals,  
wireless and landline networks as well as user-programmed  
functions which cannot guarantee connection in all conditions.  
Therefore you should never rely solely upon any wireless phone  
for essential communications (e.g. medical emergencies).  
If you make an emergency call, your phone changes to  
emergency call mode. If you choose to exit this mode, emergency  
operators may not be able to contact you. Keep your phone in  
emergency call mode until emergency personnel arrive on the  
scene. In emergency call mode, some menu items may not be  
available. To exit emergency call mode, at the Start screen,  
press Exit. When the question Restore normal service?appears,  
click OK.  
Remember, to make or receive any calls the phone must be  
switched on and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
If certain features are in use (Keyguard, call restrictions, etc.),  
you may first need to turn those features off before you can  
make an emergency call. Consult this document and your local  
cellular service provider.  
When making an emergency call, remember to give all the  
necessary information as accurately as possible. Remember that  
your wireless phone may be the only means of communication  
at the scene of an accident - do not cut off the call until given  
permission to do so.  
27  
 
Emergency key 9  
Use Menu 4 1 1 to turn on this feature. When this feature is  
on, the phone attempts to make an emergency call when you:  
press and hold the 9 key, or  
press 9, then press Call.  
Note: When Keyguard is active, the only way to make an  
emergency call is to dial the emergency number, then  
press Call.  
IMPORTANT!  
Official emergency numbers (for example, 911) vary by location.  
Only one number is dialed automatically by Emergency Key 9,  
and it might not be the proper number in all circumstances.  
28  
 
8. Advanced functions  
Network feature setting  
Call forwarding, call waiting, and send own caller ID with next  
call are network services available through your service provider.  
These features do not appear in your phone’s Network  
services menu until you save the related feature code(s) given  
to you by your service provider. After you save the feature  
activation or cancellation code, the feature appears in the  
phone’s menu and you can use the menu to turn the feature  
on or off.  
Note: Feature codes can be saved only when your primary  
phone number (NAM 1) is selected. See page 35.  
Adding feature activation codes to the menu  
To save a feature activation code, press Menu 4 4 5. At the  
Feature code: prompt, enter the feature activation code,  
then press OK. Scroll to the feature that the code applies to,  
then press Select. (If the feature is call forwarding, choose  
one of the four types of call forwarding.) Finally, scroll to  
Activate, then press OK.  
Activate now appears in the menu for that feature.  
Adding feature cancellation codes to the menu  
To save a feature cancellation code, press Menu 4 4 5. At the  
Feature code: prompt, enter the feature cancellation code,  
then press OK. Scroll to the feature that the code applies to,  
then press Select. (If the feature is call forwarding, choose one  
of the four types of call forwarding.) Finally, scroll to Cancel,  
then press OK.  
Cancel now appears in the menu for that feature.  
In-call menu  
When you are in a single call, the Navi™ key function is End.  
However, you can use your phone’s in-call menu to perform  
several functions while in a call. To access the in-call menu,  
press  
to change the Navi™ key function to Options,  
then press Options.  
29  
       
Note: If you have an active call and an incoming or held call,  
pressing isn’t necessary; Optionsappears automatically.  
If you receive a call while in a call, the Navi™ key function  
changes to Answer.  
Depending on the number of active calls and whether you are  
using digital or analog mode, the following in-call options  
may be available:  
Mute/End  
mute  
mute/unmute the phone’s microphone  
Flash  
switch between calls/answer waiting call/  
make new call  
End  
end all calls  
Touch tones send touch tones  
Menu  
access your phone’s menu  
Phone book access the phone book  
Making/receiving multiple calls  
Note: The following two features might not be supported in  
your network. Contact your service provider for details.  
Making a new outgoing call  
Type in the phone number you wish to call and press Options  
to access the in-call menu. Then, press Flash. The first call is  
automatically put on hold. To join the calls, press Flash again.  
Receiving a new call  
If you are in a call and you receive a call, press Answer. The  
first call is automatically put on hold. To swap between the  
calls, press Flash.  
Ending all calls  
Select End from the in-call menu.  
30  
Call waiting  
Call waiting is a network service that allows you to receive  
an incoming call when you’re already in a call. Contact your  
service provider for details.  
Answering a waiting call  
When you receive a call while already in a call, the Navi™  
key function changes from End to Answer. Press Answer to  
answer the waiting call. The call you were in is put on hold,  
and the Navi™ key function changes to Options. To switch  
between calls, or to end all calls, press Options to access  
your phone’s in-call menu.  
For complete information on your phone’s in-call menu, see  
Cancelling call waiting: normal method  
To cancel call waiting before making a call, you must get the  
call waiting cancellation code from your service provider.  
1
2
Dial the code for cancelling call waiting (for example, *810).  
Press Call.  
Cancelling call waiting: menu method  
You can save the code for cancelling call waiting given by your  
service provider and then use Menu 4 4 2 2 to cancel call  
Calling cards  
If you wish to use a calling card for  
long distance calls, you must first save  
your calling card information into your  
phone. Your phone can save information  
about four calling cards.  
Saving calling card information  
1
Press Menu 4 1 3.  
2
Scroll to the desired calling card, then press Options.  
31  
3
4
5
Scroll to Edit, then press OK.  
Enter your security code (see page 63), then press OK.  
At Dialing sequence, press Select. Press  
to choose  
the dialing sequence your card uses, then press Select.  
Dialing  
sequence  
Use for cards that  
require you to:  
Cards using  
this sequence  
Access no.  
Dial 1-800 access number, MCI, AT&T  
+ phone no. then phone number, then card True Choice,  
+ card no.  
number (+ PIN if required) SprintCanada,  
Unitel  
Access no.  
+ card no.  
Dial 1-800 access number, networkMCI,  
then card number (+ PIN if WorldPhone  
+ phone no. required), then phone number MCI  
Prefix Dial the prefix (any numbers GTE, PacBell,  
+ phone no. that must precede the phone AT&T, Stentor  
+ card no.  
number) and phone number  
you want to dial, then card  
number (+ PIN if required)  
Note: The order of the following steps may vary, depending  
on which dialing sequence your card uses.  
6
7
8
Enter the access number (usually the 1-800 number  
listed on the back of the calling card), then press OK.  
Enter your card number and/or PIN, then press OK. Your  
phone will display Save changes? Press OK.  
Press  
to reach Card name, then press Select. Enter  
the card name using your phone’s keypad, then press OK.  
Note: This procedure might not work with all calling cards.  
Please look at the back of your calling card or contact your  
long distance company for more information.  
Choosing a calling card to use  
Use Menu 4 1 3 to select a calling card to use. You are  
required to enter your security code.  
32  
Calling card calls  
To make a call using a calling card:  
1
Enter the phone number, including any prefix (such as 0  
or 1) that your calling card may require when you make  
a calling card call (see your calling card for instructions).  
2
3
Press and hold Call for a few seconds until your phone  
displays Card call.  
Your phone displays Wait for tone, then press OK. Wait  
for the tone, then press OK.  
Your phone displays Wait for tone, press OK again. Wait  
for the tone again, then press OK.  
Call forwarding  
Call forwarding is a network service that lets you forward your  
incoming calls to another phone number. Check with your  
service provider for details and feature codes.  
Activating call forwarding  
Standard method  
To activate call forwarding, you must get the call forwarding  
activation code from your service provider.  
1
Dial the code for activating call forwarding followed by  
the phone number to which you want to forward your calls.  
2
Press Call.  
Example: If the call forwarding activation code is *71 and  
the number you want to forward calls to is (214) 555-1234,  
dial *712145551234, then press Call.  
Menu method  
You can save the code for activating call forwarding and then  
use the menu to activate call forwarding (see ‘Adding feature  
33  
Cancelling call forwarding  
Standard method  
To cancel call forwarding, you must get the call forwarding  
cancellation code from your service provider.  
1
Dial the code for cancelling call forwarding (for example,  
*710).  
2
Press Call.  
Menu method  
You can save the code for cancelling call forwarding and then  
use the menu to cancel call forwarding (see ‘Adding feature  
Voice privacy  
Note: Availability of this feature depends on your arrangement  
with your service provider and the network’s ability to support  
the feature.  
Some service provider’s networks can encrypt the signal  
transmitted during a phone call to ensure others are unable  
to listen to your conversation. By default, the voice privacy  
setting on your phone is set to Off. To turn it on, press  
Menu 4-4-1 (Settings - Network services - Voice privacy).  
Scroll to On, then press OK.  
During a call, if voice privacy is lost, your phone sounds two  
short beeps.  
1-touch dialing  
1-touch dialing lets you make phone calls quickly and easily  
with the touch of a button. Once you have assigned a phone  
number to a number key (2 through 8), you can press and hold  
that key to dial the number. (You can also press and hold the  
number key and then press Call.)  
Note: Keys 1 and 9 are used exclusively for dialing your voice  
mailbox and for attempting emergency calls, respectively  
page 27).  
34  
Assigning numbers to keys  
Before you can assign a phone number to a key, the phone  
number must be saved in your phone book (see page 17).  
Then follow the steps below.  
1
2
3
Press Menu 1 6.  
Scroll to the desired key, then press Assign.  
Press  
or  
to choose the name you want to assign  
to the selected key, then press Select.  
If a key already has a number assigned to it, you can press  
Options and then view, change, or erase the number assignment.  
Making calls using 1-touch dialing  
Press and hold a number key (2 through 8) for a few seconds  
to call the number assigned to it. Your phone finds the phone  
number, displays it briefly, then dials it.  
You can also enter the number of the 1-touch dialing key  
(for example, 2) and press Call.  
Choosing your phone number  
(NAM selection)  
Your service provider can set up your phone to have two phone  
numbers that are activated in different service areas—for  
example, one number for the Dallas area and one number for  
the Chicago area.  
A number assignment module, or NAM, consists of a phone  
number and network information that the service provider  
programs into your phone. When you select a NAM, you’re  
not only selecting a phone number, you’re also selecting a  
home system in which you will not be charged roaming fees.  
Use Menu 4 4 6 to select a NAM.  
35  
 
Send own caller ID with next call  
Send own caller ID with next call is a network service that lets  
you hide your phone number from a person you are calling  
who has Caller ID. (If for some reason your network prevents  
phone numbers from being displayed, you may be able to use  
this feature to show your number to the person you are calling.)  
Contact your service provider for feature codes for showing/  
hiding your phone number.  
Note: This feature works on a call-by-call basis.  
Standard method  
1
Dial the feature code followed by the number you want  
to call.  
2
Press Call.  
Example: If the feature code to hide your number is *67  
and the number you want to dial is (214) 555-1234, dial  
*672145551234, then press Call.  
Menu method  
You can save the feature code given to you by your service  
provider so that Send own caller ID with next call appears  
in your phone’s menu, and then use Menu 4 4 4 to use this  
This feature must be activated before each call; you cannot  
permanently turn it on or off.  
Yes displays your number to the person you are calling.  
No prevents your number from being shown to the person  
you are calling.  
NAM update  
Note: This feature may not be available in all systems. Please  
contact your service provider for details about the availability  
of this feature.  
With this feature you can activate or reactivate your phone  
without having to go to your service provider. Please refer to  
the Easy Activation card that was included in your sales package  
for more information on how to activate or reactivate your  
phone.  
36  
In some cases, when you try to connect to your service provider,  
the following message may appear on the screen:  
‘LOCK’ prevents the service provider from changing your  
carrier lock code. ‘UNLOCK’ allows the provider to change  
the code and restrict others from activating your phone.  
If this happens, select the appropriate selection for your phone.  
If you don’t want your service provider to change your lock  
code, select LOCK. If you want to allow your service provider  
to change your code to prevent other service providers from  
activating your phone, press UNLOCK.  
Press and hold  
start screen.  
for several seconds to return to the  
Note: Contact your service provider if you have any questions.  
System selection  
The System menu (Menu 5) allows you to modify how your  
phone will work when you are outside of your primary or  
“home” system. (Items on the System menu may differ  
depending on your service provider.) How your phone will  
handle being out of your home area can significantly affect  
the types and amounts of additional charges you may incur.  
Service Types  
In each wireless service area there are usually two service  
providers, referred to as type A and type B.  
When you first set up your wireless service account, your  
service provider will inform you of which system you will  
be using (for example, type A). This is your home system.  
The other system (for example, type B) is known as your  
non-home system.  
Roaming  
Roaming is a term used to indicate that your phone is not in  
its home area. While roaming, you are actually using another  
service provider’s system. Calls made or received while roaming  
are usually more expensive than calls made in your home area.  
37  
Roaming indicators  
When your phone begins roaming, Roaming appears. If roaming  
in a non-preferred system, the roaming indicator ( ) also  
appears.  
System choices  
Your phone will automatically try to use a preferred system.  
If your phone fails to find a preferred system, then it will use  
the selection you have chosen with this feature. Before you  
select a system, contact your service provider to learn how  
these changes may affect your phone bill. Items on the System  
menu may differ depending on your service provider:  
Automatic - Use the home system. If unavailable,  
use a non-home system.  
Automatic A - Use the home or preferred system.  
If unavailable, use system A.  
Automatic B - Use the home or preferred system.  
If unavailable, use system B.  
Home only or <service provider’s name> - Use only  
the home system. If unavailable, No service appears.  
Analog - Use the available analog network.  
Note: If you turn your phone's power off then on, depending on  
your service provider, the system may return to the default  
selection.  
Which system should you choose?  
By default, your phone is set to automatically search for the  
most cost-effective system when you are outside of your home  
area. For example, if your home system is type A and you are  
roaming, your phone will automatically try to use the local  
home system (the type A system in your current location).  
The type B system would be a non-home system.  
However, in an area where no home or preferred systems are  
available, use this menu to manually choose which system  
your phone uses.  
38  
By setting your phone to use a home or preferred system, it’s  
possible for you to receive discounted roaming charges. Check  
with your service provider to maximize use of this feature.  
In non-preferred systems, normal roaming charges are  
determined by the host system. Your phone is designed to  
select a system most favorable to you concerning the cost  
of the call and reception quality.  
Note: When roaming in some systems, you may need to have  
a roaming agreement in order to place a call. If no roaming  
agreement has been arranged, a network operator may interrupt  
and request information on how you intend to pay for the call.  
If you have more than one phone number  
The currently-selected NAM in your phone determines which  
system is your current home system. See “Choosing your phone  
Note: Powering the phone off then on will reset any manual  
overrides for analog or non-preferred systems.  
Anykey answer  
This feature allows you to answer an incoming call by pressing  
any key except  
or off.  
. Use Menu 4 1 5 to turn this feature on  
Automatic answer  
This feature is available only when your phone is connected  
to a handsfree device.  
When automatic answer is turned on, your phone answers  
incoming voice calls after one ring. Use Menu 4 1 4 to turn  
this feature on or off.  
Touch tones  
Your phone can generate various sounds, called touch tones,  
when the keys are pressed.  
39  
 
Touch tones can be used for many automated services such  
as checking voice mail, movie times, and airline arrival/  
departure times.  
Note: Sending confidential information over the air using  
touch tones is not recommended.  
Setting manual touch tone length  
Use Menu 4 2 1 1 to set the length of touch tones created  
when you press a key:  
Continuous sounds the tone for as long as you press and  
hold the key.  
Fixed sets the tone length to one tenth of a second, regardless  
of how long you press and hold the key.  
Off turns off touch tones. No tones are sent when you press  
the keys.  
Setting automatic touch tone length  
Use Menu 4 2 1 2 to set the length of touch tones sent  
automatically by the phone to Short (one tenth of a second)  
or Long (half a second).  
Saving touch tone strings  
Touch tone strings can be used for sending and receiving  
information with your phone. Save touch tone strings the  
same way you save phone numbers (see ‘Saving names and  
For example, you can save your office voice mailbox number  
along with your password for easy access to your messages  
Sending touch tone strings  
1
During a call, press  
screen.  
to clear any numbers from the  
2
3
4
Press Options.  
Scroll to Touch tones, then press OK.  
Enter or find the touch tone string, then press OK.  
40  
Downloadable ringing tones  
Depending on your service provider, you can download  
(over the air) ringing tones and save them in your phone.  
Note: The method that you use to download a ringing tone to  
your phone varies among wireless service providers. For example,  
in some cases, you can send a ringing tone to your phone from  
an internet web page. For details about this network service,  
contact your wireless service provider.  
The names of tones that you download and save appear in  
the list that you see when you press Menu 8 2 (Tones -  
Ringing tone). In addition to the 40 default ringing tones  
that come with your phone, you can save five downloaded  
ringing tones.  
When a ringing tone has been downloaded to your phone,  
the message Ringing tone received appears.  
To listen to the tone, press Options, scroll to Playback,  
then press OK. The phone plays the tone. To stop playing  
the tone, press Quit.  
To discard the tone immediately after you receive it (before  
you press Options), press <Clear>. Or, to discard the tone  
after you have pressed Options, scroll to Discard, then  
press OK.  
To save the tone after you listen to it, scroll to Save, then  
press OK. If space in your phone’s memory exists for the  
tone, the tone is saved. If space does not exist, scroll until  
the name of the tone you want to replace is highlighted,  
then press Replace. To view the list of tones, press Menu  
8 2 (Tones - Ringing tone).  
Restore factory settings  
You can use Menu 4 2 2 to reset many of the settings in your  
phone to their factory defaults (as in a new phone). You are  
required to enter the security code.  
Note: The phone book, language setting, call timers, security  
code, and lock code are not affected.  
41  
9. Call log  
For your convenience, the call log (Menu 3) saves a list of phone  
numbers you have dialed, and can show you approximately how  
much time you have spent on the phone. If you subscribe to  
the caller ID network service, the call log also records the  
phone numbers of missed calls and received calls. Contact  
your service provider for details.  
The Options key  
When you access Missed calls, Received calls, or Dialed calls  
and press Options, a list of options appears on your phone’s  
screen.  
Call dials the number.  
Call time shows the time of the call. (Your phone’s clock must  
be set; see page 22.)  
Use number shows you the number before you dial it.  
Save lets you enter a name for the number, edit the number  
if needed, and save both to your phone book.  
Erase erases the number from the call list.  
View number displays the associated phone number if only  
the name is currently displayed.  
Missed calls  
If you subscribe to the caller ID network service, your phone  
automatically stores the last 10 numbers that have tried  
unsuccessfully to reach you (as long as the caller allowed  
his or her number to be shown to you).  
When the screen says Missed calls  
Press List. If you have missed more than one call, you can  
scroll through the list of numbers. To dial the displayed number,  
press Options, then choose Call.  
Viewing the missed calls list at any time  
Use Menu 3 1 to view the missed calls list at any time.  
To dial a number, press Options, then choose Call.  
42  
 
Received calls  
If you subscribe to the caller ID network service, your phone  
automatically stores the phone numbers of the 10 most recent  
calls you’ve answered. Use Menu 3 2 to view the received  
calls list. To dial a number, press Options, then choose Call.  
Dialed calls  
Your phone automatically stores the last 10 numbers you’ve  
dialed. From the start screen, press  
to access the dialed  
calls list. Scroll to the desired number, then press Call.  
Note: To perform any of the options listed on page 42, access  
the dialed calls list by pressing Menu 3 3.  
Clearing call lists  
Use Menu 3 4 to clear the missed, dialed, and/or received  
call lists.  
Call timers  
Use Menu 3 5 to access this feature.  
Call timers lets you see the amount of  
time you’ve spent in calls. Times are for  
the currently selected phone number;  
your phone has a separate timer for  
each phone number, or NAM (see page 35).  
Note: The actual time invoiced for calls by your service provider  
may vary, depending upon network features, rounding-off for  
billing, and so forth.  
Viewing call timers  
Use Menu 3 5 to view the various call timers.  
Last call displays the duration of the last call, or current call  
if applicable.  
All calls displays the duration of all calls since the timers were  
last reset.  
Life timer displays the duration of all calls for the life of  
your phone and cannot be reset.  
43  
Setting timers back to 0  
Use Menu 3 5 4 to clear call timers. You are required to  
enter your security code.  
Displaying the current call timer during calls  
1
2
3
4
Press Menu 3 5 1.  
Press Details.  
Press Select.  
Scroll to On, then press OK.  
During a call, the amount of time spent in that call is displayed  
for ten seconds.  
44  
10. Voice messages  
Voice mail is a network service that allows callers to record  
a message when you cannot be reached. You can then call  
your voice mailbox and retrieve your messages.  
Saving your voice mailbox number  
When you subscribe to voice mail, your service provider gives  
you a voice mailbox number. You should save this number so  
you can call your voice mailbox by pressing and holding  
,
or by pressing  
In addition to a voice mailbox number, your service provider  
may also give you a password, which you can save along with  
your voice mailbox number. This way, you can access your voice  
mailbox and then quickly send your password by pressing the  
Navi™ key rather than dialing your password separately.  
If your service provider gives you a password and you want  
to save it with your voice mailbox number, refer to ‘Special  
Listening to new voice messages  
When you receive a voice message, your phone may notify you  
by beeping, displaying the voice message indicator  
,
and displaying New voice message. The phone may display  
the number of messages if there is more than one.  
Note: The method of notification depends on your service  
provider.  
When your phone notifies you that you have a new voice  
message, press Listen. Your phone dials your voice mailbox  
number, if you have saved it.  
If you received a voice mailbox password, and if you saved it  
with your voice mailbox number, follow these steps:  
1
When your phone notifies you that you have a new voice  
message, press Listen. Your phone dials your voice mailbox  
number, and your password displays.  
45  
 
2
When your phone notifies you that you’re able to listen  
to your messages, press Send.  
Note: The method of notification depends on your service  
provider. If you have any questions about voice messaging,  
contact your service provider.  
Calling your voice mailbox at any time  
Once you have saved your voice mailbox number, you can  
press and hold  
to dial your voice mailbox.  
46  
11. Mobile messages  
Note: Before you can send or receive mobile messages, you may  
need to subscribe to the mobile messaging service offered by  
your service provider. Also, some networks may not support  
mobile messaging.  
About mobile messages  
A mobile message is a message in the form of text that appears  
on your phone’s screen. You can address outgoing messages  
to email addresses and phone numbers. The recipient of your  
message typically receives it via:  
a phone that supports mobile messaging  
a pager  
the internet (through an email client)  
Message storage  
Messages are stored in your phone in folders:  
Inbox - Messages (whether read or unread) that you  
have received and have neither erased nor saved.  
Outbox - Messages that you sent (or that you have  
created then saved, intending to send later).  
Saved - Messages that were in the Inbox or Outbox  
and which you have saved.  
Your phone can store as many as 60 messages (memory is  
shared by all folders). However, the total number of stored  
messages depends on message length. If your phone’s memory  
is full when you receive a mobile message:  
If the message is not an emergency message, the oldest  
sent message in the Outbox folder will automatically  
be deleted, but “drafts” (unsent messages) will not be  
deleted. If there are no sent messages in the Outbox  
folder, the oldest read message in the Inbox folder is  
deleted. If there are no read messages in the Inbox,  
No space: message waiting or a similar message  
appears, prompting you to delete messages from  
one of the other folders. The network will resend the  
message later.  
47  
 
If the message is an emergency message (sent only  
by a network operator), in addition to the messages  
mentioned above, other messages in the Inbox, Outbox,  
and Saved folders could be automatically deleted if  
your phone’s memory is full.  
Types of mobile messages  
Depending on your service provider, when you create a mobile  
message, Text and Number only may appear in a list of menu  
items, requiring that you select the type of message to send.  
If this list does not appear, your phone will automatically create  
the type of message supported by your service provider:  
Text - A text mobile message can include text in  
addition to a callback number.  
Number only - A number only mobile message is  
like a numeric page: a callback number (the sender’s  
phone number) appears on the recipient’s pager or  
phone display.  
Parts of a mobile text message  
A message consists of a header and a body. The header may  
contain the sender’s phone number or email address and the  
date and time that the message was sent. If an entry in your  
Phone book matches the sender’s phone number, the sender’s  
name also appears. The body contains the main part of the  
message. If you receive a message that was sent via email,  
the subject (title) of the message may appear at the beginning  
of the message body.  
Urgent mobile messages  
An urgent priority level can be assigned to a mobile message.  
When you receive an urgent mobile message, Urgent appears  
in the message header. When you send an urgent mobile  
message, a similar notification message (or an icon) appears  
on the recipient’s phone or other device (if the recipient’s  
phone or other device supports it). See ‘Sending a message’  
48  
 
Message delivery notification  
When you send a message, you can request to be notified  
when the recipient receives the message. This notification is  
Receiving a mobile message  
When you receive a mobile message, the mobile message icon  
appears and Message received (or New emergency  
message) is displayed. Also, depending on the message alert  
tone setting, a tone may sound. See ‘Message alert tone’ on  
page 24. You can:  
Press  
to dismiss the notification and read the  
message later (it will be available from your Inbox),  
or...  
Press Read to read the message  
Note: If No space: message waiting or a similar message  
appears, there is no room left in your phone’s memory. You  
need to make room for the message. See ‘Message storage’  
If you press Read, the Inbox appears with the new message  
selected. Press Read again. If necessary, scroll down to read  
the entire message. At the end of the message, scroll further  
to view the sender’s name or phone number and the date and  
time the message was received. When you’ve seen the last new  
message, the  
icon disappears. While reading a message,  
you have several Options (depending on the type of message,  
some of these options may not be available):  
Erase deletes the message. Press OK to confirm the  
deletion or to cancel. For more information about  
Reply allows you to send a message back to the sender.  
For more information about replying to a message,  
Save sends the message to the Saved folder.  
49  
Use number allows you to quickly call or save a phone  
number if it was included in the message. If more  
than one number was included, a list of numbers is  
displayed. To save the number, read the message and  
ensure that the number you want to save is visible  
(if necessary, scroll the screen). Press Options. Scroll  
to Use number and press Select. If only one phone  
number appears on the screen, press Call (or press  
<Down>, then press Save). If a list of numbers appears,  
scroll to a number, press OK, then press Call (or press  
<Down>, then press Save).  
Save address extracts one or more email addresses  
from the message (if it contains any) and allows you  
to save them in your Phone book.  
Forward allows you to forward the message to another  
recipient. For more information about forwarding a  
Reply w/ copy allows you to send a message back  
to the sender. Your message will include a copy of  
the message you received. For more information about  
replying to a message, see ‘Replying to a message’  
Creating, addressing, and sending a  
number only message  
Note: To create a text message, see ‘Creating a text message’  
on page 51. For information about number only messages,  
1
2
Press Menu 2 1 1 (Messages - Text messages - Write new).  
Note: If Text and Number only appear in a list of menu  
items, scroll to Number only, then press Select.  
Use the following guidelines when addressing your message  
and specifying a callback number:  
Use Add number to specify a recipient’s phone  
number. The maximum number of characters allowed  
in a phone number is 32.  
50  
 
When prompted to enter a recipient’s phone number,  
you can manually enter it or search for it.  
When searching, the list of entries in your phone book  
is displayed. To quickly jump to an entry, press the  
appropriate key. For example, if the entry is "John"  
(j), press <5 key>. To jump to "Kim" (k), press <5 key>  
twice.  
You can address your message to as many as 10  
recipients. You can see a list of all recipients to  
whom your message is addressed (List recipients).  
You can create a message, save it in your Outbox,  
then address it and send it later (Save).  
The callback number (Callback no.) is the phone  
number at which you want the recipient to call you.  
When prompted to enter a callback number, the  
default callback number (your mobile phone number)  
may appear in the field. You can use this number or  
enter a different number.  
Creating a text message  
Note: To create a number only message, see ‘Creating,  
There are two ways to create a text message:  
Write a new, blank message  
Reply to a received message (see ‘Replying to a  
Writing a new, blank message  
1
Press Menu 2 1 1 (Messages - Text messages - Write new).  
2
Do Text and Number only appear in a list of menu items?  
Yes - Scroll to Text. Press Select. Go to the next step.  
No - Go to the next step.  
51  
 
3
At this point, you can address your message or begin  
writing it, then address it later:  
To address your message, scroll to Add e-mail or  
Add number, then press Select. See ‘Addressing a  
To begin writing your message, scroll to Edit message,  
then press Select. The terms writing and editing refer  
to the process of entering text into a text message.  
4
After you have written your message, you can:  
Address it (page 53) then send it (page 58) OR...  
Save it to the Outbox, then address it send it later -  
Press Options, scroll to Save, then press Select.  
Replying to a message  
1
Read the message to which you want to reply.  
If you just received the message and the Start  
screen is currently displayed, press Read.  
If the message is in the Inbox folder, press Menu 2 1 2.  
If the message is in the Saved folder, press Menu 2 1 4.  
2
3
Scroll to the message. Press Read, then Options.  
Scroll to Reply (or Reply w/ copy if you want your reply  
to include a copy of the original message followed by the  
text of your reply). Press Select.  
Note: If you choose to Reply w/ copy, your message could be  
rather long. In some networks, a long message may be truncated  
(the end of the message may be cut off), preventing the recipient  
from seeing all of it.  
4
After you write your message, you can:  
Address it (page 53) then send it (page 58). OR...  
Save it to the Outbox (press Options, scroll to Save,  
then press Select), then address it and send it later.  
52  
 
Addressing a text message  
Note: To address a number only message, see ‘Creating,  
Use the following procedure to address your message to one  
or more recipients:  
1
Are you currently editing the message that you want to  
address?  
Yes - Press Options, then go to the next step.  
No (for example, you wrote the text message and  
saved it, intending to send it later) - Open your Outbox  
(Menu 2-1-3). Scroll until the message you want to  
address is highlighted. Press Options. Scroll to Resend.  
Press Select. Go to the next step.  
2
3
Scroll to Add e-mail (to send the message to an email  
address) or Add number (to send the message to a phone  
number), then press Select.  
Enter the email address or phone number, then press OK.  
You can address a text message to as many as 10  
email addresses, phone numbers, or a combination  
of both. To see a list of all recipients to whom your  
message is addressed, scroll to List recipients, then  
press Select.  
The maximum number of characters allowed in a  
phone number is 32. The maximum number of  
characters allowed in an email address is 48.  
While entering a phone number or email address,  
press and release  
press and hold  
to delete one character, or  
to delete all characters.  
If a recipient's email address or phone number is in  
your Phone book, you can quickly enter it by searching  
for the recipient's name. To search, press Search. To  
quickly jump to an entry in your phone book, press  
the appropriate key. For example, if the entry is "John"  
(j), press <5 key>. To jump to "Kim" (k), press <5 key>  
twice. If an email address or phone number is not  
associated with the entry that you select, a message  
will appear: No e-mail address found or No numbers  
found.  
53  
 
When entering an email address manually, you can  
quickly enter the @ symbol by pressing  
repeatedly until it appears.  
Entering text into a message  
A counter in the top right corner of the screen indicates the  
number of remaining characters that you can enter into  
your message.  
Caution: While editing a message, if you accidentally press  
and hold  
, all text within your message will be deleted.  
To exit the message editor at any time and lose your text,  
press Options, scroll to Exit, then press Select.  
Ways to enter text into a message  
There are several ways to enter text into a message:  
Traditional (multi-tap) input method - (This is the default  
mode.) This method requires that you press some keys  
more than once (multi-tap). For example, to enter the  
letter “c”, you must press 2 2 2. See ‘Entering letters and  
Predictive text input method - When using the predictive  
text input method, your phone “guesses” which word you  
are entering, requiring that you press a key only once for  
Note: By default, your phone is set in the traditional text  
input mode. Before you can use the predictive text input  
method, you must first activate the predictive text mode.  
To activate it, press Options. Scroll to Predictive text.  
Scroll until the name of the language in which you want  
to edit your message appears. Press OK.  
Templates - A template is a predefined, commonly used  
sentence that you can quickly insert into a message. See  
54  
 
Predictive text input  
Note: The predictive text feature is based on a built-in  
dictionary to which you can add words. Your phone includes  
several different language versions of this dictionary. Although  
your phone may be able to display a given language on the  
screen, it does not necessarily contain a predictive text  
dictionary of that same language.  
Predictive mode is indicated by the presence of the predictive  
text icon (  
) at the top of the display. If the icon does not  
appear, predictive mode has been deactivated. To activate it,  
press Options. Scroll to Predictive text. Scroll until the name  
of the language in which you want to edit your message  
appears. Press OK.  
Writing words  
To write a word, press each key only once for each letter of  
the word. For example, to write hello, press 4 3 5 5 6. The  
characters that you enter appear underlined. The word changes  
after each keystroke, so try not to pay attention to how the  
word appears on the display until you have pressed all the  
appropriate keys.  
When you finish writing the word, check to ensure that the  
word is correct. If the word is correct, enter a space (press  
) and write the next word. If the word is incorrect and  
is underlined, press  
repeatedly until the desired word  
appears, OR press Options, scroll to Matches, then press OK.  
Your phone displays a list of words. Choose a word from the  
list, then press Use, OR, press  
to exit and return to the  
message editor.  
If the ? character appears after the word, there are no more  
words in the dictionary that correspond to your key presses.  
At this point, you can add the word to the dictionary by  
pressing Spell.  
Writing compound words  
To quickly write a compound word (for example, bluejay):  
1
Write the first part (blue).  
55  
 
2
3
Press  
from the first part.  
(do not enter a space). The underline disappears  
Write the second part (jay).  
Deleting characters  
To delete one character to the left of the cursor, press  
.
To delete all characters in the message, press and hold  
.
Changing the method of text input  
To toggle between predictive  
and traditional  
text  
input modes, press several times until the icon that  
indicates the mode you want to use appears.  
Tip: If you don’t want to use predictive text input mode at  
all, you can deactivate it. (You can reactivate it later.) See  
Changing letter case modes  
To toggle between upper case  
and lower case  
letter mode, press . If predictive text mode is active, if  
you don’t wait at least 1.5 seconds between key presses, the  
text input mode will also be toggled between traditional  
and predictive.  
Note: If predictive text mode is active when you create a new  
message, the first letter of the first word that you enter will  
be upper case.  
Entering numbers  
To enter one or just a few numbers, press and hold the  
respective number key. To enter many numbers, change to  
number entry mode (  
To change to number entry mode, press and hold  
) and enter the numbers as usual.  
, OR,  
press Options, scroll to Insert number, then press Select.  
Inserting special characters  
To insert a special character (such as a punctuation mark), press  
and hold  
, OR press Options, scroll to Insert symbol,  
then press Select. To quickly insert a period (.), press  
.
To quickly insert double dashes (--) or three ellipses (...),  
press  
a few times.  
56  
Adding a new word to the dictionary  
If the ? character appears after the word, press Spell. (OR, at  
any time while editing, press Options, scroll to Insert word,  
then press OK.) Enter the word using traditional text input, and  
press Select. If the dictionary is full, the new word replaces the  
oldest added word.  
Changing the language of the dictionary  
1
2
3
While editing a message, press Options.  
Scroll to Predictive text, then press Select.  
Scroll to a language, then press OK.  
The selected language is now active.  
Activating predictive text input mode  
Press Options, scroll to Predictive text, then press Select.  
Scroll to the desired input language, then press OK. Your  
phone is now in predictive mode.  
Deactivating predictive text input mode  
While editing a message, press Options. Scroll to Predictive  
text. Scroll to Prediction off, then press OK. Your phone is  
now in traditional (multi-tap) mode.  
Templates  
Note: Templates are available in English only.  
A template is a predefined, commonly used sentence that  
you can quickly insert into a message. While you’re editing a  
message, press Options, then select Add template. Select a  
template:  
1. Call me at [ ]. <phone number/time/place>  
2. I’ll call you at [ ]. <time/place>  
3. Meet me at [ ]. <time/place>  
4. I’ll be there at [ ]. <time>  
5. I’ll be [ ] minutes late. <number of minutes>  
6. I’m running late.  
7. I’m on my way.  
8. Meeting cancelled.  
57  
   
9. Meeting changed to [ ]. <time/place>  
10. Appointment cancelled.  
11. I love you!  
12. Thank you!  
13. I’m sorry.  
14. Call at your convenience.  
15. Please call ASAP.  
Brackets ([ ]) in a template represent a value that you can  
specify. (The value is not retained for future use; you enter  
the value each time you use the template.) If you select a  
template that contains brackets, you’ll be prompted to enter  
a value. You can edit the template text after you insert it  
into your message.  
Sending a message  
This procedure assumes that you have already addressed your  
message and entered some text into it (or have entered a  
Before you send your message, you can select one or more  
options. While you're editing the message, press Options, scroll  
to Settings, then press Select. To select an option, Mark it.  
To deselect an option, Unmark it.  
Urgent - Sets the priority level of your message to  
"urgent". Urgent message or a similar notification  
will appear on display screen of the recipient's phone  
or other device.  
Delivery note - When the recipient receives your  
message, the network will send you a delivery note.  
If you address the message to more than one recipient,  
you will receive a separate delivery note for each  
recipient.  
Callback no. - Allows you to enter a phone number  
at which the recipient can call you.  
After you mark and unmark the options, press  
. The  
message Save changes? appears. To accept the changes that  
you made to the settings, press Yes. To discard the changes,  
press  
again.  
58  
 
To send the message, press Options, scroll to Send, then press  
OK. If the network can’t send your message, a warning note  
should appear. Try to resend the message later. See ‘Resending  
Resending a message  
1
Open your Outbox (Menu 2-1-3). Scroll until the message  
you want to resend is highlighted.  
2
Press Options. Scroll to Resend. Press Select.  
Before you resend your message, you can edit it. You  
can also edit the recipients list (Add e-mail, Add  
number, or List recipients).  
All settings (Urgency, Delivery note, and Callback no.)  
that you chose for the original message are retained  
unless you edit the settings (Options > Settings).  
3
To send the message, press Options, scroll to Send, then  
press Select.  
Forwarding a message  
1
In the Inbox or Saved folder, read the message that you  
want to forward.  
2
3
Press Options, scroll to Forward, then press Select.  
Prepare your message as you would any other message  
that you create.  
If the message you are forwarding is a text message,  
you can edit the message before you send it.  
If your phone is configured to be able to send a number  
only message, you can forward a callback number as  
a number only message, provided the original message  
was also a number only message.  
4
After you prepare your message, you can:  
Address it (page 53) then send it (page 58). OR...  
Save it to the Outbox (press Options, scroll to Save,  
then press Select), then address it and send it later.  
59  
   
Erasing messages  
You can erase the message you’re reading or several messages  
at once.  
Erasing the message you’re reading  
Press Options, scroll to Erase., then press Select.  
Erasing multiple messages  
1
Press Menu 2 1 5.  
2
Scroll until the appropriate item in the list is highlighted,  
then press Select. Depending on your service provider, you  
may be required to confirm your choice or enter your  
security code to prevent accidental deletion of messages.  
All read - Erases all read messages in the Inbox  
(unread messages are not erased); erases all messages  
in the Outbox and Saved folders (the Outbox and  
Saved folders cannot contain unread messages).  
All in inbox - Erases all messages (read or unread)  
in the Inbox.  
All in outbox - Erases all messages (sent or unsent)  
in the Outbox.  
All saved - Erases all messages in the Saved folder.  
60  
 
12. Extra features  
Alarm clock  
The alarm clock feature sounds an alert  
at a time you specify.  
Setting the alarm clock  
Use Menu 7 1 to turn the alarm clock  
on or off.  
Note that when you’re entering the alarm time, use two digits  
for both hours and minutes (for example, enter 1:30 as 0130).  
Note: Pressing  
does not work on this screen. If you make  
a mistake, re-enter all four digits. Press up or down on the scroll  
keys to move the cursor. The number you press is entered to  
the right of the cursor.  
Alarm volume  
The alarm volume is determined by the current ringing volume.  
However, if you have manually set the ringing option (see  
page 24) to Silent or Beep once or have selected the Silent  
or Quiet quick alert setting (see page 25), the phone only  
sounds a quiet beep.  
When the alarm sounds  
To shut off the alarm, press any key except Snooze.  
If you press Snooze, the alarm sounds again in ten minutes.  
To turn off the alarm before then, press Stop.  
If you let the alarm sound for one minute without pressing  
a key, it stops for ten minutes, then starts again.  
If you turn off the phone  
If you turn off the phone and the alarm is set, the phone  
switches itself on at alarm time, then the alarm sounds.  
To shut off the alarm, press any key except Snooze.  
The phone displays Keep the phone on?. Press Yes to  
keep it on or  
to switch it off.  
61  
If you press Snooze, the phone turns itself off for ten  
minutes, then the alarm sounds again.  
REMEMBER! Do not switch on the phone when wireless phone  
use is prohibited or when it may cause interference or danger.  
Games  
Use Menu 6 to challenge yourself or a friend to the three  
fun games in your phone. To pause a game, press  
.
To resume, choose Continue.  
REMEMBER! Your phone must be switched on to use this  
function. Do not switch on the phone when wireless phone  
use is prohibited or when it may cause interference or danger.  
Memory  
Reveal pictures to find pairs in as few tries as possible. Move  
the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down) keys.  
Press the 5 key to reveal pictures. Once found, pairs stay visible.  
Press  
move from the bottom right of the screen to the top left.  
Press to jump to the left over revealed pictures or to  
to jump to the right over revealed pictures or to  
move from the top left of the screen to the bottom right.  
Snake  
Feed the snake with as many goodies as possible and watch  
it grow. Use keys 2, 4, 6, and 8 to turn the snake toward food.  
The longer the snake’s tail grows, the higher your score. If the  
snake hits its own tail or the surrounding wall, the game is over.  
Logic  
Find the secret combination of figures in a column. Possible  
figures are shown at the top of the screen. Press the 5 key  
repeatedly to select a figure and the 2, 4, and 8 keys to move  
the cursor. Once you think you have the right combination,  
press  
. The result appears as a set of marks above the  
column. A correct figure in the right place gets a full mark; a  
correct figure in the wrong place gets a half mark. The game  
ends when the correct figures are in the right place.  
Tip: To copy a figure from the previous column, move  
the cursor over it using the 2, 4, or 8 key, then press  
the 5 key.  
62  
13. Security features  
Access codes overview  
Access codes consist of the lock code and security code. When  
you get your phone, you should change these codes from their  
defaults, write down the new codes, and keep them in a safe  
place away from the phone. Avoid using access codes that  
are similar to emergency numbers, such as 911, to prevent  
accidental dialing of the emergency number.  
Lock code  
Your phone’s lock code is used to lock and unlock your phone.  
Depending on your service provider, the default lock code is  
either 1234 or the last four digits of your phone number.  
Use Menu 4 3 2 3 to change the lock code.  
When the phone requires the lock code, it displays Enter  
lock code:. Enter the code, then press OK.  
If you enter a wrong lock code five times in succession, your  
phone prompts you for the security code.  
Security code  
The security code is required to restrict calls and to restore  
factory settings. The default security code is 12345. Use  
Menu 4 3 2 4 to change the security code.  
When the phone requires the security code, it displays  
Security code: Enter the code, then press OK.  
If you enter an incorrect security code five times in succession,  
the phone will not accept any input for the next five minutes.  
Restricting calls  
Use Menu 4 3 1 to restrict outgoing or incoming calls. This  
is handy if you want to lend your phone to someone but don’t  
want them to make long-distance or other expensive calls.  
63  
   
Restricting incoming calls  
You can block all incoming calls or create a list of incoming  
numbers from which you don’t want to receive calls. To block  
all incoming calls, enter your security code, scroll to Select  
and press OK, then press Mark.  
Press Unmark if you want to remove the restriction.  
Press  
, then press Yes to save your changes (or  
to cancel).  
Note: This feature requires the caller ID network service, and  
the caller’s ID must be available to the phone in order for the  
restriction to work.  
Adding numbers to the restricted incoming calls list  
A call restriction can consist of an entire phone number, just  
an area code, etc. When the restriction is selected, calls cannot  
be received from any number beginning with those digits.  
For example, entering 2145551234 blocks calls from (214)  
555-1234 only. 214 blocks all calls from the 214 area code.  
To create a list of incoming numbers from which you don’t  
want to receive calls, enter your security code, then press OK.  
Continue with the steps illustrated below.  
1
2
3
Scroll to Add restriction, then  
press OK.  
Enter the phone number, area code,  
etc. of the number from which you  
want to restrict calls, then press OK.  
If you want, give a name of up to  
10 characters to the restriction  
(such as Joey), then press OK.  
64  
The entry is added to your list of restricted numbers. Your  
phone can save up to 15 restricted incoming numbers.  
Once you enter 15 restricted numbers, the Add restriction  
option is removed from the menu. This option is available  
again once you delete one or more phone numbers from  
the restricted list.  
Note: Your phone does not alert you to incoming calls from  
restricted numbers unless the caller leaves a voice message.  
Making changes to the restricted incoming calls list  
To edit or completely erase an entry in the list, choose Edit  
or Erase, select the entry you want to edit or erase, and  
follow the instructions on the screen.  
Allowing calls from a number on the list  
If you later decide to allow calls to a  
restricted number, scroll to Select and  
press OK to see your list of numbers.  
Press Unmark to remove the restriction.  
(The number remains in the list so that  
you can restrict it again later by pressing Mark.) When you’re  
done, press  
. Press Yes to save your changes (or  
to cancel).  
Restricting outgoing calls  
You can block all outgoing calls or create a list of numbers  
to which outgoing calls cannot be made. To block all  
outgoing calls,  
1
2
3
4
Enter your security code and press OK.  
Scroll to Select and press OK.  
With All calls highlighted, press Mark.  
Press  
, then press Yes to save your changes (or  
to cancel).  
65  
Adding numbers to the restricted outgoing calls list  
A call restriction can consist of an entire phone number, an  
area code, etc. When the restriction is selected, calls cannot  
be made to any number beginning with those digits. For  
example, entering 2145551234 blocks calls to (214) 555-  
1234 only. 1 blocks all calls starting with 1, including long  
distance calls and 1-800 calls. 1800 blocks 1-800 calls only.  
To prevent your phone from making outgoing calls, scroll to  
Add restriction and press OK. Continue with the steps  
illustrated below.  
1
2
3
Scroll to Add restriction, then  
press OK.  
Enter the phone number, area code,  
etc. to which you want to restrict  
calls, then press OK.  
If you want, give a name of up to  
10 characters to the restriction (such  
as Joey, Long dist, or 1-800 #s),  
then press OK.  
The entry is added to your list of  
restricted numbers. Your phone can  
save up to 10 restricted outgoing numbers. Once you  
enter 10 restricted numbers, the Add restriction option  
is removed from the menu. This option is available again  
once you delete one or more phone numbers from the  
restricted list.  
Making changes to the restricted outgoing calls list  
To edit or completely erase an entry in the list, choose Edit  
or Erase, select the entry you want to edit or erase, and  
follow the instructions on the screen.  
66  
Allowing calls to a number on the list  
If you later decide to allow calls to a  
restricted number, scroll to Select and  
press OK. You can now see your list of  
numbers. Press Unmark to remove the  
restriction. (The number remains in the  
list so that you can restrict it again later by pressing Mark.)  
When you’re done, press  
. Press Yes to save your  
changes (or  
to cancel).  
Phone lock  
You can prevent unauthorized use of your phone by locking  
it. When your phone is locked, only incoming calls and calls  
to the unlocked phone number (see below) are allowed.  
The memory and menu are unavailable.  
Note: Calls may still be possible to emergency numbers.  
How to lock your phone  
Press Menu 4 3 2 1. Enter the lock code (see page 63), then  
press OK. Scroll to On, then press OK.  
How to unlock your phone  
Press Menu, enter the lock code, then press OK.  
Answering a call when the phone is locked  
Press Answer.  
Saving the unlocked phone number  
Use Menu 4 3 2 2 to save a number that may be called even  
when your phone is locked. You are required to enter the  
lock code.  
Calling the unlocked phone number  
Press  
or  
, or manually enter the number exactly as it  
is saved, then press Call.  
67  
14. Accessories  
An extensive range of accessories  
is available for your phone. You  
can select the accessories that best  
suit your specific communication  
needs. For availability, see your  
local authorized Nokia dealer.  
A few practical rules for accessory  
operation:  
Keep accessories out of small children's reach.  
When you disconnect the power cord of any accessory,  
grasp and pull the plug, not the cord.  
Check regularly that all wireless phone equipment in your  
vehicle is mounted and operating properly.  
Installation of complex car equipment must be completed  
by qualified personnel only.  
WARNING!  
Use only batteries, chargers and accessories approved by the  
phone manufacturer for use with this particular phone model.  
The use of any other types may invalidate any approval or  
warranty applying to the phone, and may be dangerous.  
68  
Nokia Xpress-on™ color covers  
Your phone’s Xpress-on™ cover is available in several fashion  
colors. Extra covers may be purchased from your authorized  
Nokia dealer.  
Note: Always store your phone with the cover attached.  
Changing covers  
When changing covers, don’t use the phone’s antenna as  
leverage!  
1
Switch off the power and disconnect the phone from  
the charger or any other device.  
2
Using a coin, depress the  
colored tab on the top of  
the phone and slide the  
color cover forward.  
3
Remove the cover.  
69  
4
Remove therubberkeypad  
from the back of the  
cover. Place it into the  
back of the new cover.  
5
Place the bottom of the  
cover against the bottom  
of the phone. Make sure  
all three sets of plastic  
tabs line up with their  
respective slots, as shown  
at left. Close the cover  
and snap it shut all the  
way around the edge of  
the phone.  
Batteries  
Several batteries are available for your phone:  
BLS-2N Extended Li-Ion 900 mAh  
BLS-4 Ultra Extended Li-Ion 1500 mAh  
BMS-2S Extended NiMH 900 mAh  
BMS-2V Vibrating NiMH 900 mAh  
BPS-1 Ultra Slim Li-Polymer 600 mAh  
70  
Charging times  
The table below displays approximate battery charging times.  
These charging times charge your phone to about 80% of its  
capacity, and the battery strength indicator stops scrolling.  
If you wish to obtain 100% battery capacity, please allow  
another two hours for “maintenance” charge.  
Rapid Cig.  
Standard  
Travel Charger  
ACP-7U  
Rapid Travel  
Charger  
ACP-9U  
Lighter  
Charger  
LCH-9  
Battery  
BLS-2N Extended Li-Ion  
900 mAh  
4 hours  
5-6 hours  
4 hours  
2 hours  
BLS-4 Ultra Extended Li-Ion  
1500 mAh  
3 hours, 30 minutes  
1 hour, 30 minutes  
1 hour, 30 minutes  
1 hour, 20 minutes  
BMS-2S Extended NiMH  
900 mAh  
BMS-2V Vibrating NiMH  
900 mAh  
4 hours  
BPS-1 Ultra Slim Li-Polymer  
600 mAh  
2 hours,  
30 minutes  
Talk and standby times  
The table below displays approximate talk and standby times.  
Variations occur depending on network settings and usage.  
Digital  
Talk Time  
Analog  
Talk Time  
Battery Option  
Standby Time  
BLS-2N Extended  
Li-Ion  
2 hrs to  
2 hrs 55 min  
40 min to  
1 hr 25 min 10 to 15 hrs (ana)  
70 to 110 hrs (dig)  
900 mAh  
BLS-4 Ultra  
Extended Li-Ion  
1500 mAh  
3 hrs 20 min to 1 hr 10 min to 115 to 180 hrs (dig)  
4 hrs 50 min  
2 hrs 25 min 15 to 23 hrs (ana)  
BMS-2S Extended  
NiMH  
2 hrs to  
2 hrs 55 min  
40 min to  
1 hr 25 min 10 to 15 hrs (ana)  
70 to 110 hrs (dig)  
900 mAh  
BMS-2V Vibrating  
NiMH  
2 hrs to  
2 hrs 55 min  
40 min to  
1 hr 25 min 10 to 15 hrs (ana)  
70 to 110 hrs (dig)  
900 mAh  
BPS-1 Ultra Slim 1 hr 20 min to  
25 min to  
55 min  
46 to 73 hrs (dig)  
8 to 16 hrs (ana)  
Li-Poymer  
1 hr 55 min  
600 mAh  
71  
 
The times shown are approximate, and represent a range for  
either standby or talk times (not a combination of both).  
Battery operation times vary according to signal conditions,  
network parameters set by the service provider, and how you  
use your phone.  
Note: Dispose of used batteries in accordance with local  
regulations.  
Chargers and other accessories  
WARNING!  
This apparatus is intended for use when supplied with power  
from the Standard Travel Charger (ACP-7U), Rapid Travel  
Charger (ACP-9U), or Rapid Cigarette Lighter Charger (LCH-9).  
Other usage will invalidate any approval given to this apparatus  
and may be dangerous.  
The following chargers and other accessories are available for  
your phone; please see your dealer for details. Also, refer to any  
accessory options manual that may have been included in your  
sales package for the entire line of Nokia Original Accessories.  
Note: When a charger is not in use, disconnect it from the  
power source. Do not leave the battery connected to a charger  
for longer than a week, since overcharging may shorten its  
life. If left unused, a fully charged battery will discharge itself  
over time.  
ACP-7U Standard Travel Charger  
Use this durable and economical  
charger to charge all battery options.  
Plug the charger into a wall outlet and  
connect the connector to the bottom  
of your phone. Check the charging  
status on your phone’s screen.  
Calls can be made during charging,  
but charging will stop for the duration of the call and the  
battery bar scrolling stops.  
72  
Note: If the battery is completely empty, you cannot use the  
phone until it has enough charge to operate.  
The Standard Travel Charger is available for different voltage  
levels and can also be used with the DCH-9 Compact Desktop  
Charging Stand.  
ACP-9U Rapid Travel Charger  
The extremely light, functionally designed  
Rapid Travel Charger charges your phone  
battery quickly.  
Plug the charger into a wall outlet and  
connect the connector to the bottom of  
your phone. Check the charging status on  
your phone’s screen. You can use your  
phone while charging.  
Operating within a voltage range of 100V-240V AC  
(50Hz-60Hz), the Rapid Travel Charger is practically voltage-  
independent in normal office and household use. Like the  
Standard Travel Charger, the Rapid Travel Charger is compatible  
with all battery options. The Rapid Travel Charger can also  
be used with the DCH-9 Compact Desktop Charging Stand.  
LCH-9 Rapid Cigarette Lighter Charger  
Using the multivoltage Rapid  
Cigarette Lighter Charger, you  
can charge your phone when  
you travel. The small charger's  
functional design fits well with  
most car lighters and interiors.  
Charging times are the same as for the Rapid Travel Charger  
ACP-9U. Calls can be made during charging.  
A green light indicates that the Rapid Cigarette Lighter Charger  
is ready to charge. Check the charging status on your phone’s  
screen. The input voltage is 12 or 24 V DC, negative grounding.  
The Rapid Cigarette Lighter Charger can be used with all  
accessories available for your phone.  
73  
Avoid prolonged charging with the Rapid Cigarette Lighter  
Charger when the car engine is not running. This may cause  
the battery of your car to drain.  
Note: In some cars the cigarette lighter plug is not provided  
with power when the ignition is switched off. Verify that the  
green LED light is lit.  
DCH-9 Compact Desktop Charging Stand  
Compatible with all battery  
options, the Compact Desktop  
Charging Stand can be used  
with the Standard Travel  
Charger ACP-7U or the Rapid  
Travel Charger ACP-9U. The  
Compact Desktop Charging  
Stand provides mounting for both the phone and a spare  
battery. Plug the charger into a wall outlet and connect the  
connector to the back of the Compact Desktop Charging  
Stand. Place your phone and/or a spare battery in the stand  
to begin battery charging.  
When the phone is charging, no lights are displayed on the  
stand; check the charging status of the phone battery on your  
phone’s screen.  
Charging moves to the rear slot once the front battery is  
100% charged.  
When the spare battery is charging, check the status indicator  
on the left side of the charging stand. A red light indicates  
that the battery is charging; a green light indicates that the  
battery is charged to at least 80% of its capacity.  
74  
DCH-9 Rear Slot Charging Times  
Using ACP-7U  
Using ACP-9U  
Battery  
Back slot  
only  
Both slots  
full  
Back slot  
only  
Both slots  
full  
BLS-2N Extended  
Li-Ion 900 mAh  
BMS-2S Extended  
NiMH 900 mAh  
6 hours,  
30 minutes 45 minutes  
9 hours,  
6 hours,  
15 minutes  
4 hours  
BMS-2V Vibrating  
NiMH 900 mAh  
BLS-4 Ultra Extended  
Li-Ion 1500 mAh  
12 hours  
4 hours,  
18 hours  
6 hours,  
8 hours  
3 hours  
12 hours  
BPS-1 Ultra Slim  
Li-Polymer  
600 mAh  
4 hours,  
30 minutes  
30 minutes 30 minutes  
The phone has the built-in intelligence to maintain the battery,  
so there is no need for a discharge feature on the stand.  
75  
15. Reference information  
Important safety information  
Traffic safety  
Do not use a hand-held telephone while driving a vehicle. If using a  
hand-held phone park the vehicle before conversing.  
Always secure the phone in its holder; do not place the phone on the  
passenger seat or where it can break loose in a collision or sudden stop.  
The use of an alert device to operate a vehicle’s lights or horn on public  
roads is not permitted.  
Remember, road safety always comes first!  
Operating environment  
Remember to follow any special regulations in force in any area and  
always switch off your phone whenever it is forbidden to use it, or  
when it may cause interference or danger.  
When connecting the phone or any accessory to another device, read  
its user’s guide for detailed safety instructions. Do not connect  
incompatible products.  
As with other mobile radio transmitting equipment, users are advised  
that for the satisfactory operation of the equipment and for the safety  
of personnel, it is recommended that the equipment should only be used  
in the normal operating position (held to your ear with the antenna  
pointing over your shoulder).  
Electronic devices  
Most modern electronic equipment is shielded from radio frequency  
(RF) signals. However, certain electronic equipment may not be shielded  
against the RF signals from your wireless phone.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum separation of 6  
inches (20 cm.) be maintained between a handheld wireless phone and  
a pacemaker to avoid potential interference with the pacemaker. These  
recommendations are consistent with the independent research by and  
recommendations of Wireless Technology Research.  
Persons with pacemakers:  
Should always keep the phone more than 6 inches (20 cm) from  
their pacemaker when the phone is switched on;  
Should not carry the phone in a breast pocket;  
Should use the ear opposite the pacemaker to minimize the  
potential for interference.  
If you have any reason to suspect that interference is taking place,  
switch off your phone immediately.  
76  
Hearing aids  
Some digital wireless phones may interfere with some hearing aids. In  
the event of such interference, you may want to consult your service  
provider.  
Other medical devices  
Operation of any radio transmitting equipment, including cellular  
phones, may interfere with the functionality of inadequately protected  
medical devices. Consult a physician or the manufacturer of the medical  
device to determine if they are adequately shielded from external RF  
energy or if you have any questions. Switch off your phone in health  
care facilities when any regulations posted in these areas instruct you  
to do so. Hospitals or health care facilities may be using equipment  
that could be sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded  
electronic systems in motor vehicles (e.g. electronic fuel injection  
systems, electronic anti-skid (anti-lock) braking systems, electronic  
speed control systems, air bag systems). Check with the manufacturer  
or its representative regarding your vehicle. You should also consult the  
manufacturer of any equipment that has been added to your vehicle.  
Posted facilities  
Switch your phone off in any facility where posted notices so require.  
Potentially explosive atmospheres  
Switch off your phone when in any area with a potentially explosive  
atmosphere and obey all signs and instructions. Sparks in such areas  
could cause an explosion or fire resulting in bodily injury or even death.  
Users are advised to switch off the phone while at a refueling point  
(service station). Users are reminded of the need to observe restrictions  
on the use of radio equipment in fuel depots (fuel storage and distri-  
bution areas), chemical plants or where blasting operations are in  
progress.  
Areas with a potentially explosive atmosphere are often but not always  
clearly marked. They include below deck on boats; chemical transfer  
or storage facilities; vehicles using liquefied petroleum gas (such as  
propane or butane); areas where the air contains chemicals or particles,  
such as grain, dust or metal powders; and any other area where you  
would normally be advised to turn off your vehicle engine.  
Vehicles  
Only qualified personnel should service the phone, or install the phone  
in a vehicle. Faulty installation or service may be dangerous and may  
invalidate any warranty which may apply to the unit.  
Check regularly that all wireless phone equipment in your vehicle is  
mounted and operating properly.  
77  
Do not store or carry flammable liquids, gases or explosive materials in  
the same compartment as the phone, its parts or accessories.  
For vehicles equipped with an air bag, remember that an air bag inflates  
with great force. Do not place objects, including both installed or  
portable wireless equipment, in the area over the air bag or in the air  
bag deployment area. If in-vehicle wireless equipment is improperly  
installed and the air bag inflates, serious injury could result.  
Switch off your phone before boarding an aircraft. The use of wireless  
telephones in an aircraft may be dangerous to the operation of the  
aircraft, disrupt the wireless telephone network and may be illegal.  
Failure to observe these instructions may lead to the suspension or  
denial of telephone services to the offender, or legal action, or both.  
Emergency calls  
IMPORTANT!  
This phone, like any wireless phone, operates using radio signals, wireless  
and landline networks as well as user- programmed functions which  
cannot guarantee connection in all conditions. Therefore, you should  
never rely solely upon any wireless phone for essential communications  
(e.g. medical emergencies).  
Remember, to make or receive any calls the phone must be switched on  
and in a service area with adequate signal strength. Emergency calls  
may not be possible on all wireless phone networks or when certain  
network services and/or phone features are in use. Check with local  
service providers.  
Making an emergency call  
1
If the phone is not on, switch it on.  
2
Press and hold  
phone for calls.  
for several seconds to ready the  
3
4
Key in the emergency number for your present location  
(e.g. 911 or other official emergency number). Emergency  
numbers vary by location.  
Press Call.  
If certain features are in use (Keyguard, call restrictions, etc.), you may  
first need to turn those features off before you can make an emergency  
call. Consult this document and your local cellular service provider.  
When making an emergency call, remember to give all the necessary  
information as accurately as possible. Remember that your wireless  
phone may be the only means of communication at the scene of an  
accident - do not cut off the call until given permission to do so.  
78  
Radio frequency (RF) signals  
THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS  
FOR EXPOSURE TO RADIO WAVES.  
Your wireless phone is a radio transmitter and receiver. It is designed  
and manufactured not to exceed the emission limits for exposure  
to radio frequency (RF) energy set by the Federal Communications  
Commission of the U.S. Government. These limits are part of compre-  
hensive guidelines and establish permitted levels of RF energy for the  
general population. The guidelines are based on standards that were  
developed by independent scientific organizations through periodic  
and thorough evaluation of scientific studies. The standards include  
a substantial safety margin designed to assure the safety of all  
persons, regardless of age and health.  
The exposure standard for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate, or SAR. The SAR  
limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using  
standard operating positions accepted by the FCC with the phone  
transmitting at its highest certified power level in all tested frequency  
bands. Although the SAR is determined at the highest certified power  
level, the actual SAR level of the phone while operating can be well  
below the maximum value. This is because the phone is designed to  
operate at multiple power levels so as to use only the power required  
to reach the network. In general, the closer you are to a wireless base  
station antenna, the lower the power output.  
Before a phone model is available for sale to the public, it must be tested  
and certified to the FCC that it does not exceed the limit established  
by the government-adopted requirement for safe exposure. The tests  
are performed in positions and locations (e.g., at the ear and worn on  
the body) as required by the FCC for each model. The highest SAR value  
for this model phone as reported to the FCC when tested for use at the  
ear is 1.32 W/kg, and when worn on the body, as described in this user  
guide, is 1.19 W/kg. (Body-worn measurements differ among phone  
models, depending upon available accessories and FCC requirements).  
While there may be differences between the SAR levels of various  
phones and at various positions, they all meet the government  
requirement.  
The FCC has granted an Equipment Authorization for this model phone  
with all reported SAR levels evaluated as in compliance with the FCC RF  
exposure guidelines. SAR information on this model phone is on file with  
the FCC and can be found under the Display Grant section of http://  
www.fcc.gov/oet/fccid after searching on FCC ID: GMLNSD-1GW.  
For body worn operation, to maintain compliance with FCC RF exposure  
guidelines, use only Nokia approved accessories. When carrying the  
phone while it is on, place the phone in the specific Nokia belt-clip  
that has been tested for compliance.  
79  
Use of non-Nokia-approved accessories may violate FCC RF exposure  
guidelines and should be avoided.  
* In the United States and Canada, the SAR limit for mobile phones  
used by the public is 1.6 watts/kg (W/kg) averaged over one gram of  
tissue. The standard incorporates a substantial margin of safety to  
give additional protection for the public and to account for any  
variations in measurements. SAR values may vary depending on  
national reporting requirements and the network band. For SAR  
information in other regions please look under product information  
80  
Care and maintenance  
Your phone is a product of superior design and craftsmanship and  
should be treated with care. The suggestions below will help you to  
fulfill any warranty obligations and allow you to enjoy this product  
for many years. When using your phone, battery, charger, OR any  
accessory:  
Keep it and all its parts and accessories out of small children’s  
reach.  
Keep it dry. Precipitation, humidity and liquids contain minerals  
that will corrode electronic circuits.  
Do not use or store it in dusty, dirty areas as its moving parts can  
be damaged.  
Do not store it in hot areas. High temperatures can shorten the  
life of electronic devices, damage batteries, and warp or melt  
certain plastics.  
Do not store it in cold areas. When the phone warms up (to its  
normal operating temperature), moisture can form inside the  
phone, which may damage the phone's electronic circuit boards.  
Do not attempt to open it. Non-expert handling of the device  
may damage it.  
Do not drop, knock or shake it. Rough handling can break internal  
circuit boards.  
Do not use harsh chemicals, cleaning solvents, or strong detergents  
to clean it. Wipe it with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
Do not paint it. Paint can clog the device’s moving parts and  
prevent proper operation.  
Use only the supplied antenna. Removal and replacement of the  
antenna by anyone other than a Nokia authorized service center  
is an unauthorized modification and invalidates the warranty,  
can damage the phone, and may violate regulations covering  
radio devices.  
If the phone, battery, charger, or any accessory is not working  
properly, take it to your nearest qualified service facility. The  
personnel there will assist you, and if necessary, arrange for service.  
81  
16. Technical information  
Operating voltage  
3.6 V nominal  
Frequency bands  
Lowband  
824.04 - 848.97 MHz (TX)  
869.04 - 893.97 MHz (RX)  
Number of NAMs  
Memory locations  
Memory capacity  
2
100  
16 characters per name  
32 characters per number  
Part No. 9353434  
Printed in Canada  
08/01  
Nokia, Connecting People and the Original Accessories logos are  
trademarks of Nokia Corporation and/or its affiliates.  
T9 text input software Copyright © 1999-2001. Tegic Communications,  
Inc. All rights reserved.  
The information contained in this User Guide was written for the Nokia  
5180i phone.  
The right to make changes and improvements to any of the products  
described in this guide without prior notice is reserved.  
Issue No. 2a © 2001 Nokia Mobile Phones. All rights reserved.  
This product contains commodities, technology or software exported  
from the United States in accordance with the Export Administration  
regulations. Diversion contrary to U.S. law is prohibited.  
82  
17. Nokia One-Year Limited  
Warranty  
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free  
from defects in material and workmanship that result in Product failure  
during normal usage, according to the following terms and conditions:  
1. The limited warranty for the Product extends for ONE (1) year  
beginning on the date of the purchase of the Product.  
2. The limited warranty extends to the original purchaser of the Product  
(“Consumer”) and is not assignable or transferable to any subsequent  
purchaser/end-user.  
3. The limited warranty extends only to Consumers who purchase the  
Product in the United States.  
4. During the limited warranty period, Nokia will repair, or replace, at  
Nokia's option, any defective parts, or any parts that will not properly  
operate for their intended use with new or factory rebuilt replacement  
items if such repair or replacement is needed because of product  
malfunction or failure during normal usage. No charge will be made to  
the Consumer for any such parts. Nokia will also pay for the labor  
charges incurred by Nokia in repairing or replacing the defective parts.  
The limited warranty does not cover defects in appearance, cosmetic,  
decorative or structural items, including framing, and any non-operative  
parts. Nokia's limit of liability under the limited warranty shall be the  
actual cash value of the Product at the time the Consumer returns the  
Product for repair, determined by the price paid by the Consumer for  
the Product less a reasonable amount for usage. Nokia shall not be liable  
for any other losses or damages. These remedies are the Consumer’s  
exclusive remedies for breach of warranty.  
5. Upon request from Nokia, the Consumer must prove the date of the  
original purchase of the Product by a dated bill of sale or dated itemized  
receipt.  
6. The Consumer shall bear the cost of shipping the Product to Nokia in  
Melbourne, Florida. Nokia shall bear the cost of shipping the Product  
back to the Consumer after the completion of service under this limited  
warranty.  
7. The Consumer shall have no coverage or benefits under this limited  
warranty if any of the following conditions are applicable:  
a) The Product has been subject to abnormal use, abnormal conditions,  
improper storage, exposure to moisture or dampness, unauthorized  
modifications, unauthorized connections, unauthorized repair, misuse,  
neglect, abuse, accident, alteration, improper installation, or other acts  
which are not the fault of Nokia, including damage caused by shipping.  
83  
b) The Product has been damaged from external causes such as collision  
with an object, or from fire, flooding, sand, dirt, windstorm, lightning,  
earthquake or damage from exposure to weather conditions, an Act  
of God, or battery leakage, theft, blown fuse, or improper use of any  
electrical source, or damage caused by the connection to other products  
not recommended for interconnection by Nokia.  
c) Nokia was not advised by the Consumer in writing of the alleged  
defect or malfunction of the Product within fourteen (14) days after the  
expiration of the applicable limited warranty period.  
d) The Product serial number plate or the accessory data code has been  
removed, defaced or altered.  
e) The defect or damage was caused by the defective function of the  
cellular system or by inadequate signal reception by the external antenna.  
8. If a problem develops during the limited warranty period, the  
Consumer shall take the following step-by-step procedure:  
a) The Consumer shall return the Product to the place of purchase for  
repair or replacement processing.  
b) If “a” is not convenient because of distance (more than 50 miles) or  
for other good cause, the Consumer shall ship the Product prepaid and  
insured to:  
Nokia Inc.  
Attn: Repair Department  
795 West Nasa Blvd.  
Melbourne, FL 32901  
c) The Consumer shall include a return address, daytime phone number  
and/or fax number, complete description of the problem, proof of  
purchase and service agreement (if applicable). Expenses related to  
removing the Product from an installation are not covered under this  
limited warranty.  
d) The Consumer will be billed for any parts or labor charges not  
covered by this limited warranty. The Consumer will be responsible  
for any expenses related to reinstallation of the Product.  
e) Nokia will repair or authorize the repair of the Product under the  
limited warranty within 30 days after receipt of the Product by Nokia  
or a Nokia authorized service center. If Nokia cannot perform repair  
covered under this limited warranty within 30 days, or after a reasonable  
number of attempts to repair the same defect, Nokia at its option,  
will provide a replacement Product or refund the purchase price of  
the Product less a reasonable amount for usage.  
84  
f) If the Product is returned to Nokia during the limited warranty period,  
but the problem with the Product is not covered under the terms and  
conditions of this limited warranty, the Consumer will be notified and  
given an estimate of the charges the Consumer must pay to have the  
Product repaired, with all shipping charges billed to the Consumer. If the  
estimate is refused, the Product will be returned freight collect. If the  
Product is returned to Nokia after the expiration of the limited warranty  
period, Nokia's normal service policies shall apply and the Consumer  
will be responsible for all shipping charges.  
9. The Product consists of newly assembled equipment that may contain  
used components that have been reprocessed to allow machine  
compliance with Product performance and reliability specifications.  
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR  
A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION  
OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE  
FOREGOING LIMITED WARRANTY IS THE CONSUMER'S SOLE AND  
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,  
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT  
LIMITED TO, LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF  
SAVINGS OR REVENUE, PUNITIVE DAMAGES, LOSS OF USE OF THE  
PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST  
OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE  
CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY  
TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE  
PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH  
OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR  
EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF  
SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN  
RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF  
USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.  
11. Some states do not allow limitation of how long an implied warranty  
lasts, so the above one-year warranty limitation may not apply to you  
(the Consumer). Some states do not allow the exclusion or limitation of  
incidental and consequential damages, so certain of the above  
limitations or exclusions may not apply to you (the Consumer). This  
limited warranty gives the Consumer specific legal rights and the  
Consumer may also have other rights which vary from state to state.  
12. Nokia neither assumes nor authorizes any authorized service center  
or any other person or entity to assume for it any other obligation or  
liability beyond that which is expressly provided for in this limited  
warranty including the provider or seller of any extended warranty or  
service agreement.  
13. This is the entire warranty between Nokia and the Consumer, and  
supersedes all prior and contemporaneous agreements or  
understandings, oral or written, and all communications relating to the  
Product, and no representation, promise or condition not contained  
herein shall modify these terms.  
85  
14. This limited warranty allocates the risk of failure of the Product  
between the Consumer and Nokia. The allocation is recognized by the  
Consumer and is reflected in the purchase price of the Product.  
15. Any action or lawsuit for breach of warranty must be commenced  
within eighteen (18) months following delivery of the Product.  
16. Questions concerning this limited warranty may be directed to:  
Nokia Customer Care Center, USA  
7725 Woodland Center Blvd., Ste. 150  
Tampa, FL 33614  
Telephone: 1-888-NOKIA2U (1-888-665-4228)  
Facsimile: (813) 249-9619  
For the hearing-impaired only (TTY):  
1-800-24NOKIA (1-800-246-6542)  
17. The limited warranty period for Nokia supplied attachments and  
accessories is specifically defined within their own warranty cards and  
packaging.  
86  
call timers 43  
18. Index  
call waiting 31  
answering a waiting call 31  
cancelling 31  
caller ID 18  
showing/hiding number 36  
calling card  
making calls 33  
set-up 31  
calls  
A
ABC mode 11  
accessories 68  
batteries 70  
chargers 72  
covers 69  
alarm clock 61  
answering a call 17  
automatic answer 39  
antenna 15  
external jack 7  
anykey answer 39  
automatic answer 39  
answering 17  
answering automatically 39  
answering with call  
waiting 31  
anykey answer 39  
ending 30  
forwarding 33  
initiating a second 30  
making 16  
muting 16, 30  
silencing an incoming call 17  
unmuting 16  
B
batteries 70  
attaching 3  
charging 3  
discharging 4  
removing 5  
blocking calls see restricting  
calls  
unmuting the  
microphone 30  
care and maintenance 81  
chargers 72  
clearing call lists 43  
clock 22  
alarm clock 61  
displaying/hiding 23  
setting 22  
time format 23  
Compact Desktop Charging  
Stand 74  
C
C key 7  
call block see restricting  
calls  
call forwarding  
activating 33  
cancelling 34  
call log 42  
clearing lists 43  
dialed calls 43  
missed calls 42  
Options key 42  
received calls 43  
call restrictions see  
restricting calls  
covers, changing 69  
cursor 11  
D
dialed calls 43  
directory see phone book 19  
87  
messages  
E
voice mail 45  
missed calls 42  
muting the  
editing names/numbers 21  
email addresses  
saving 19  
microphone 16, 30  
emergency calls 27, 78  
emergency key 9 28  
erasing names/numbers 21  
external antenna jack 7  
N
NAM selection 35  
names  
editing 21  
entering 11  
erasing 21  
finding 17, 20  
saving 19  
F
factory settings, restoring 41  
G
games 62  
Navi™ key 6  
network feature setting 29  
new call 30  
numbers  
H
help text 8  
I
in-call menu 29  
editing 21  
entering 12  
erasing 21  
finding 17, 20  
saving 19  
K
Keyguard 13  
keypad lock 13  
keys  
showing/hiding your own 36  
C key 7  
Navi™ key 6  
power key 6  
scroll keys 7  
O
on/off 15  
one-touch dialing 34  
L
P
language 23  
lights 7  
phone book 19  
available memory 21  
scrolling view 21  
phone lock 67  
phone number, choosing  
see NAM selection  
power key 6  
in car kit 23  
lock code 63  
locking the keypad 13  
locking your phone 67  
M
profiles see quick  
alert settings  
making a call 16  
memory 21  
menu 8  
Q
shortcuts 9  
quick alert settings 25  
88  
R
T
Rapid Cigarette Lighter  
Charger 73  
technical information 82  
timers 43  
Rapid Travel Charger 73  
received calls 43  
redial  
tones 23  
keypad 24  
message alert 24  
quick alert settings 25  
ringing option 24  
ringing tone 24  
ringing volume 24  
warning and game 25  
touch tones 39  
automatic 22  
last number 17  
restore factory settings 41  
restricting calls 63  
ringing see tones  
Roaming 37  
Roaming indicators 38  
saving touch tone strings 40  
setting automatic length 40  
setting manual length 40  
S
safety guidelines 1, 76  
safety information 76  
scroll keys 7  
U
unmuting the  
microphone 16, 30  
scrolling view 21  
security code 63  
security features 63  
send caller ID 36  
Service Types 37  
signal strength 15  
silencing an incoming call 17  
sound see tones  
special characters 12  
speed dialing see one-touch  
dialing  
Standard Travel Charger 72  
System choices 38  
System selection  
Roaming 37  
V
vibrating alert 25  
voice mail messages 45  
voice mailbox number 26  
voice privacy 34  
volume  
earpiece 16  
ringing 24  
W
warranty 83  
welcome note 26  
system selection 37  
89  
Para obtener un manual del usuario en español favor de  
llamar o enviar un fax al teléfono 1-888-NOKIA2U  
(1-888-665-4228), fax 813-249-9619.  
90  

Kyocera Mita FS 1900 User Manual
Kompernass KH 1114 User Manual
HP Hewlett Packard DESKJET 712C User Manual
Hitachi Travelstar HTS722016K9A300 User Manual
Hamilton Beach 44371 User Manual
GE 168965 User Manual
FieldServer FS 8700 70 User Manual
Bodum 10096 User Manual
Black &amp; Decker DCM900WH User Manual
Bell 330D User Manual