Keys
Fixed-length
antenna
Power key
Do not
attempt to
extend or
remove!
Earpiece
Current
function of
Navi™ key
Screen
Navi™ key
0HQX
Scroll keys
Clear key
Voice mail key
Number keys
Emergency 9 key
Indicators and icons
You have an active call.
You have one or more new voice messages.
You have one or more new text messages.
Keyguard is on. Your phone will not accept any
keypresses. To turn it off, press Unlock, then
.
The alarm clock is set.
The ringing option is set to Silent.
Digital service is available.
Your phone is roaming outside its home system.
The phone is ready for you to enter a response.
Characters entered will be upper-case letters.
Press the
key to switch letter case.
Characters entered will be lower-case letters.
Press the key to switch letter case.
Characters entered will be numbers. (When entering
letters, switch to numbers by pressing and holding
the
key.)
You are in “special character” mode; select a char-
acter, then press Use. (When entering letters, switch
to special characters by pressing the
key.)
Contents
i
Adding feature activation codes
to the menu . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Adding feature cancellation codes
to the menu . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Choosing your phone number
(NAM selection). . . . . . . . . . . . . . . . . . . . . . . . . .32
ii
iii
iv
1. For your safety
Read these simple guidelines before using your phone.
Failure to comply with these guidelines may be dangerous
or illegal.
Road Safety Comes First
Don’t use a hand-held phone while driving; park the
vehicle first.
Switch Off In Hospitals
Follow any regulations or rules. Switch phone off near
medical equipment.
Switch Off On Aircraft
Wireless phones can cause interference. Using them on
aircraft is illegal.
Switch Off When Refueling
Don’t use phone at a refueling point. Don’t use near fuel or
chemicals.
Switch Off Near Blasting
Do not use the phone where blasting is in progress.
Observe restrictions, and follow any regulations or rules.
Interference
All wireless phones may get interference which could
affect performance.
Use Sensibly
Use only in the normal position (to ear). Don’t touch the
antenna unnecessarily.
Qualified Service
Only qualified service personnel must install or repair
equipment.
Accessories and Batteries
Use only approved accessories and batteries. Do not
connect incompatible products.
1
FCC/Industry Canada Notice
Your phone may cause TV or radio interference (for example,
when using a telephone in close proximity to receiving
equipment). The FCC or Industry Canada can require you to
stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local
service facility.
This device complies with part 15 of the FCC rules.
Operation is subject to the condition that this device
does not cause harmful interference.
Using this Guide
The wireless phone described in this guide is approved for
use in TDMA and AMPS networks.
Network services
A number of features included in this guide are called
network services. They are special services provided by
wireless service providers. Before you can take advantage
of any of these network services, you must subscribe to
the service(s) from your home service provider and obtain
instructions for their use.
Updates
The latest version of this Owner’s Manual may be found on
2
2. Battery installation and
charging
Before you can use your new phone, you need to attach and
charge the battery.
Attaching the battery
To attach the battery, place it
on the back of the phone as
shown and slide it toward the
top of the phone until it clicks
into place.
Battery charging
Your phone is powered by a rechargeable NiMH or Li-Ion
battery. Note that a new NiMH battery’s full performance is
achieved only after two or three complete charge and discharge
How to charge your battery
Connect the lead from the charger to the bottom of your
phone or to a charging stand. Then plug the charger into a
standard wall outlet.
When the battery is charging, the battery strength indicator
on the right side of the display scrolls.
Note: When you charge the battery for the first time, the
battery strength indicator will not scroll the entire time; this
is normal.
Problems charging
If your phone displays Not charging, charging is suspended.
Check that the battery is connected to an approved
charging device. If the battery is very hot or cold, wait for a
3
while; charging will automatically resume after the battery
is restored to its normal operating state. If charging still
fails, contact your dealer.
When is charging complete?
When the charge indicators stop scrolling, your
phone is considered fully charged. However, a
slight increase in charge may occur if you leave
your phone connected to the charger.
When is a good time to charge?
You can charge anytime, but remember that when your
phone displays Battery low, you only have a couple of
minutes of talk time left.
Can I make calls while charging?
Yes, but depending on the charger used, your battery may
not charge during a call.
Discharging NiMH batteries
For good operation times, discharge NiMH batteries from
time to time by leaving your phone switched on until it
turns itself off (or by using the battery discharge facility of
any approved accessory available for your phone). Do not
attempt to discharge the battery by any other means.
Removing the battery
Note: Switch off the phone before removing the battery!
1
Press and hold the
button at the top of the
battery.
2
3
Slide the battery toward
the bottom of the phone.
Lift the battery off the
phone.
4
Important battery information
•
Note that a new battery’s full performance is achieved only after
two or three complete charge and discharge cycles!
•
The battery can be charged and discharged hundreds of times
but it will eventually wear out. When the operating time (talk
time and standby time) is noticeably shorter than normal, it is
time to buy a new battery.
•
•
Use only batteries approved by the phone manufacturer and
recharge your battery only with the chargers approved by the
manufacturer.
When a charger is not in use, disconnect it from the power
source. Do not leave the battery connected to a charger for
longer than a week, since overcharging may shorten its life. If
left unused a fully charged battery will discharge itself over time.
•
(NiMH batteries only) For good operation times, discharge the
battery from time to time by leaving your phone switched on
until it turns itself off (or by using the battery discharge facility
of any approved accessory available for your phone). Do not
attempt to discharge the battery by any other means.
•
Temperature extremes will affect the ability of your battery to
charge: allow it to cool down or warm up first.
•
•
•
Use the battery only for its intended purpose.
Never use any charger or battery which is damaged or worn out.
Do not short circuit the battery. Accidental short circuiting can
occur when a metallic object (coin, clip, or pen) causes direct
connection of the + and - terminals of the battery (metal strips
on the back of the battery), for example when you carry a spare
battery in your pocket or purse. Short circuiting the terminals
may damage the battery or the connecting object.
•
Leaving the battery in hot or cold places, such as in a closed car
in summer or winter conditions, will reduce the capacity and
lifetime of the battery. Always try to keep the battery between
59º F and 77º F (15º C and 25º C). A phone with a hot or cold
battery may temporarily not work, even when the battery is fully
charged. NiMH batteries’ performance is particularly limited in
temperatures below 14º F (-10º C). Li-Ion batteries’ performance
is particularly limited in temperatures below 32º F (0º C).
•
•
Do not dispose of batteries in a fire!
Dispose of used batteries in accordance with any local
regulations.
5
3. About the phone, keys and menu
Power key
You can use the power key
to:
•
•
•
turn the phone on or off (press and hold)
turn the phone’s lights on for 15 seconds
off and the phone is not connected to a headset or
handsfree car kit)
•
silence the ringing of an incoming call
Nokia Navi™ key
Your phone’s Navi™ key
appears
below the display. Its current function
is indicated by the word that appears
above it (for example, Menu). Simply
press the Navi™ key to perform the
function.
Throughout this guide, when you see “press Menu,” “press
Listen,” etc., press the Navi™ key when that word appears
above it.
Scroll keys
The scroll keys
are located to the right of the
Navi™ key. Use the scroll keys to:
•
•
•
•
•
browse menus
adjust the earpiece volume while in a call
access your phone book (press
access the dialed calls list (press
from the start screen)
from the start screen)
6
Clear key
Use the clear key
to:
•
•
•
•
•
delete a character to the left of the cursor
clear all characters from the display (press and hold)
return to the previous menu level
return from the menu to the start screen (press and hold)
access the in-call menu while in a call
Lights
To turn your phone’s lights on for 15 seconds:
•
•
if Keyguard is off, press any key
if Keyguard is on, you must press the
key briefly
(this conserves battery power by keeping the lights from
turning on when the phone is in a pocket or purse)
For information about controlling your phone’s lights when
External antenna jack
At the back of the phone, below the antenna, there is a
connector for an external antenna. The connector may be
protected by a rubber cap. Remove the cap before connecting
an external antenna. After removing the antenna, replace
the cap.
Note: Keep the cap out of the reach of small children.
Start screen
The start screen appears when you first
turn on your phone. Menu appears
above the Navi™ key so you can access
your phone’s menu. Several features
can be used only when the phone is at
the start screen.
7
To get to the start screen, press and hold
for a second.
(If there are characters on the display this clears the
characters, then you must press and hold
again.)
Menu
Your phone’s menu allows you to easily access the many
powerful features in your phone.
Scroll bar
When you use your phone’s menu, a scroll bar
appears at the far right of the screen. This bar
indicates where you are in the menu; each tab
location on the bar represents a different menu
item.
For example, press Menu once. The scroll bar appears with
the first (top) tab displayed. A different tab appears each
time you press one of the scroll keys
.
Help text
Many menu items have brief help text. To view the help text,
scroll to the menu item and wait for about 10 seconds for
the text to appear. Press More or
to see the next page
of text,
to see the previous page, or to return to
the menu.
8
Menu shortcuts
When you select a menu item, numbers appear on
the display above the scroll bar. If you become
familiar with these numbers, you can use them as
shortcuts for accessing different menu items. For
example, to access the Phone settings menu, you
can simply press Menu 4 2. The phone displays the first item
in that menu, Touch tones.
Note: (1) Menu items in your phone vary depending on the
network and accessories used. (2) This is not a complete list;
see entries about individual features for more information.
1 Phone book
11 Search
12 Add new
13 Edit
3 Call log
31 Missed calls
32 Received calls
33 Dialed calls
34 Clear call lists
14 Erase
141 One by one
142 Erase all
341 All
342 Missed
343 Received
344 Dialed
15 Options
151 Scrolling view
152 Memory status
35 Call timers
351 Last call
352 All calls
16 1-touch dialing
353 Life timer
354 Clear timers
2 Messages
21 Text messages
211 Inbox
212 Saved
213 Write new
214 Outbox
215 Erase all
22 Voice messages
221 Listen to voice
messages
222 Voice mailbox
number
23 Welcome note
9
4 Settings
8 My tones
41 Call settings
81 Ringing options
411 Emergency key 9
811 Ring
412 Automatic redial
812 Ascending
813 Ring once
814 Beep once
815 Silent
413 Calling card
414 Automatic answer2
42 Phone settings
82 Ringing tone
421 Touch tones
422 Language
423 Restore factory
settings
(30 tones)
83 Ringing volume
831 Level 1
832 Level 2
833 Level 3
834 Level 4
835 Level 5
424 Lights1
43 Security settings
431 Restrict calls
432 Access codes
44 Network services
84 Message alert tone
441 Voice privacy
442 Network feature
setting
841 No tone
842 Standard
843 Special
844 Beep once
845 Long & loud
443 Call forwarding3
444 Call waiting3
445 Send own number3
85 Keypad tones
45 NAM selection
851 Off
852 Level 1
853 Level 2
854 Level 3
5 System
51 Automatic
52 Manual
86 Warning and game
tones
861 On
862 Off
53 New search
6 Games
4
87 Vibrating alert
61 Memory
62 Snake
63 Logic
871 On
872 Off
9 Keyguard
7 Clock
71 Alarm clock
72 Clock settings
721 Display/Hide clock
722 Adjust time
723 Time format
1
Visible only when used with car kit
Visible only when used with headset or car kit
Must be added to the menu manually; see ‘Network feature setting’ on page 27
Visible only when vibrating battery is attached
2
3
4
10
Entering letters and numbers
Cursor
The cursor is a blinking vertical line that appears on the
screen when you are entering text or numbers. Characters
you enter appear to the right of the cursor. Pressing the
key deletes the character to the left of the cursor. Use the
scroll keys to move the cursor to the right
or left
.
ABC mode
When your phone is ready for you to enter text, such as a
name or message, it switches to ABC mode. The
shows that it is in ABC mode.
icon
When
is displayed, you can enter these characters by
pressing the indicated key repeatedly:
Key
1
Characters
. , ? ! - 1
ABC2
Key
7
Characters
PQRS7
2
8
TUV8
3
DEF3
9
WXYZ9
space, 0
4
GHI4
0
5
JKL5
6
MNO6
Changes letter case,
switches between
letters and numbers
Changing letter case
Press the
letters. The
key to switch between upper- and lower-case
icon switches to to indicate that you
are using lower case.
Entering numbers
To enter numbers while in ABC mode, you can:
•
press and hold the corresponding key until the number
appears, or
•
switch between ABC mode and number mode by
pressing and holding the
key.
11
Special characters in names
In ABC mode you can press the
key to view the special
characters below. You can use these characters when saving
names in your phone book. Simply press
or
to
highlight the one you want, then press Use.
. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ % / < > ¿ ¡ =
Tip: To choose a character that appears near the end
of the list, immediately press
the list.
to go to the end of
Special characters in phone numbers
You can use special characters to dial or save phone numbers
of automated services such as bank account information.
When entering numbers, press the
you see the character you want.
key repeatedly until
Character
Use
*
This character is used to request services
from the network. Contact your service
provider for details.
+
p
This character is not currently used.
This character creates a pause. Digits to the
right of the p are sent as touch tones after a
2.5-second pause.
Use this character to save phone numbers of
automated services that require you to enter
a password or other information after the
call is answered. For example, if your voice
mail number at work is 555-1212 and you
need to enter your extension (1234) and then
a password (5678) in order to listen to your
messages, you could save this phone number
as 5551212p1234p5678.
w
This character creates a wait. It works
similarly to the pause character except that
digits to the right of the w are not sent until
you press Send.
12
Keyguard (locking the keypad)
The Keyguard feature allows you to
“lock” your phone’s keypad so that
accidental keypresses have no effect.
This is handy when your phone is in a
pocket or purse.
Note: Keyguard is not a security feature and will not prevent
unauthorized use of your phone.
To lock the keys
Press Menu 9 or Menu
.
To unlock the keys
Press Unlock
.
Notes about Keyguard
•
When Keyguard is on, the only way to answer a call is to
press Answer.
•
When Keyguard is on, calls may be possible to the
emergency number programmed into your phone
(e.g. 911 or other official emergency number). However,
one-touch emergency dialing (‘emergency key 9’) does
not operate.
•
Keyguard is automatically turned off when the phone is
connected to a car kit.
13
4. Basic functions
Turning the phone on or off
Press and hold the
key for one second.
WARNING! Do not switch on the phone when wireless phone
use is prohibited or when it may cause interference or
danger.
About the antenna
Your Nokia phone has a fixed-length antenna. Do not
attempt to extend or remove it.
Normal position
Hold the phone as you would any other telephone, with the
antenna pointed up and over your shoulder.
Tips on efficient operation
As with any other radio transmitting device, do not touch
the antenna unnecessarily when the phone is switched on.
Contact with the antenna affects call quality and may cause
the phone to operate at a higher power level than otherwise
needed.
Checking signal strength
Your phone operates on radio waves. Radio signal coverage
is maintained by a wireless network, and the quality of calls
on your phone depends on the strength of the wireless radio
signal.
14
Get a strong signal
a call, the strength of the radio signal is indicated
by the signal indicators on the left side of your
phone’s display. These indicators scroll as the
signal strength increases and decreases.
To improve your phone’s reception, try moving your phone
slightly. If you’re inside a building, move toward a window.
Making a call
1
Enter the area code and phone
number. (Menu changes to Call.)
2
Press Call and wait for the other
party to answer.
Volume adjustment (earpiece)
To adjust the earpiece volume, press
or
during a
call. If an accessory with its own loudspeaker is connected
to your phone, the scroll keys will adjust the volume for that
accessory.
Muting the microphone
When you are in a call, you can mute the phone’s
microphone by pressing
, pressing Options, and
selecting Mute. To unmute the microphone, press
,
press Options, and select Unmute.
Note: For more information about the in-call menu,
Ending a call
Press End.
15
Last number redial
The last 10 numbers you dialed are stored in the dialed calls
list. Use this list to redial a number you have called recently.
1
From the start screen, press
calls list.
to access the dialed
2
3
Scroll to the desired number.
Press Call.
Saving a name and number
Finding a name and number
1
Press
to access your phone book.
2
Scroll to the number you want. (To skip ahead quickly in
the list, press the number key that corresponds to the
first letter of the name.)
3
Press Call.
For other ways to find names and numbers, see ‘Finding
Answering a call
When someone calls, the phone will alert you (see ‘Tones’ on
call, press any key except
.
Note: To prevent accidental answering when the phone is in
a pocket or purse, the phone will not answer the call if you
press the key for longer than one second.
For information on setting your phone to answer incoming
16
Caller ID
Caller ID is a network service that can display the name and
phone number of the person calling you, if the information
is available. Contact your service provider for details.
If the caller can be identified, the
phone may display the caller's name
and phone number. The information
displayed depends on the information
available through the network and
your phone book. It is possible that only the name or the
number will appear.
Call - caller ID unavailable will display when the wireless
network does not recognize the calling number. Also, Call -
caller ID blocked may display if the calling party has
blocked caller ID.
Silencing an incoming call
To silence the ringing of an incoming call, press
briefly.
17
5. Settings
This section describes some phone settings that allow you to
customize your phone to suit your preferences and that you
probably won’t change very often.
Automatic redial
Use Menu 4 1 2 to turn this feature on or off. When this
feature is on and the wireless network is busy, your phone
will redial a number up to three times. This feature will not
redial to a busy phone number.
To stop the call attempts, press Quit or
.
Calling card set-up
If you wish to use a calling card for
long distance calls, you must first save
your calling card information into your
phone. Your phone can save
information about two calling cards.
To learn how to make calling card calls, see ‘Calling card
Saving calling card information
1
2
3
4
5
Press Menu 4 1 3.
Scroll to the desired calling card, then press Options.
Scroll to Edit, then press OK.
At Dialing sequence, press Select. Press
to choose
the dialing sequence your card uses, then press Select.
18
Dialing
sequence
Use for cards that
require you to:
Cards using
this sequence
Access no.
Dial 1-800 access number, MCI, AT&T True
+ phone no. then phone number, then Choice, Sprint
+ card no.
card number (+ PIN if
required)
Canada, Unitel
Access no.
+ card no.
Dial 1-800 access number, networkMCI,
then card number (+ PIN WorldPhone
+ phone no. if required), then phone
number
MCI
Prefix
Dial the prefix (any
GTE, PacBell,
+ phone no. numbers that must precede AT&T, Stentor
+ card no.
the phone number) and
phone number you want to
dial, then card number
(+ PIN if required)
Note: The order of the following steps may vary, depending
on which dialing sequence your card uses.
6
7
8
Enter access number (usually the 1-800 number listed
on the back of the calling card), then press OK.
Enter your card number and/or PIN, then press OK. Your
phone will display Save changes? Press OK.
Press
to reach Card name, then press Select. Enter
the card name using your phone’s keypad, then press OK.
Note: This procedure might not work with all calling cards.
Please look at the back of your calling card or contact your
long distance company for more information.
Choosing a calling card to use
To select a calling card to use, press Menu 4 1 3, scroll to the
card you want, then press Options. Select is highlighted;
press OK. Enter your security code, then press OK.
19
Clock
Your phone has an internal clock that
can be displayed on the start screen.
The clock must be set in order for call
times to be recorded (see ‘Call log’ on
If you remove the battery for longer than a couple of
seconds, the time will be lost. The next time you turn on the
phone, you will be asked to enter the time.
Selecting time format
Use Menu 7 2 3 to set the clock’s format to 24-hour or am/pm.
Setting the time
Use Menu 7 2 2 to enter the current time. Use two digits for
both hours and minutes (for example, enter 1:30 as 0130).
If the clock’s time format is set to am/pm, you will be asked
to choose am or pm.
Note: The
key does not work on this screen. If you
make a mistake, re-enter all four digits.
Displaying or hiding the clock
Press Menu 7 2 1 to display the clock on the phone’s screen
if it is currently hidden, or vice versa.
When the clock is displayed and the
3:15 a.m.
3:15 p.m.
36=48
36=48
time format is set to am/pm, a black
square will appear next to the time
indicating a.m. or p.m.
Language
Use Menu 4 2 2 to set the language of
your phone’s display. You can choose
from English, French, Spanish, and
Portuguese.
The shortcut for choosing English is to
press Menu 4 2 2 1.
20
Lights
If you’re using your phone with a car kit, use Menu 4 2 4 to
set your phone’s lights to On (lights stay on) or Automatic
(after 15 seconds, lights turn off until the next key is
pressed, phone rings, etc.).
For information about turning your phone’s lights on at any
time, see page 7.
Tones
Use Menu 8, My tones, to change the six sound settings in
your phone: ringing option, ringing tone, ringing volume,
message alert tone, keypad tones, and warning and game
tones.
select a fixed combination of these settings to suit your
current environment.
Ringing option
Use Menu 8 1 to tell your phone how to notify you that you
have a call.
Note: If you choose Beep once or Silent, the alarm clock
will only sound a quiet beep.
Ring The phone rings normally using the currently selected
ringing tone.
Ascending The phone rings using the currently selected
ringing tone. The ringing volume starts low and increases
with successive rings.
Ring once The phone rings once using the currently
selected ringing tone.
Beep once The phone beeps once.
Silent The phone makes no sound when you receive a call.
The
icon appears at the start screen.
21
Ringing tone
Your phone plays a ringing tone when someone calls you
and the ringing option is set to Ring, Ascending, or Ring
once. Use Menu 8 2 to choose one of 30 ringing tones.
Scroll to a tone to hear how it sounds.
Note: If the ringing option is set to Silent or Beep once, the
phone won’t play sample tones.
Ringing volume
Use Menu 8 3 to control the volume of
your phone’s ringing and of message
alert tones.
Note: If your phone does not ring
loudly enough at maximum volume, try
a different ringing tone; some tones are louder than others.
Message alert tone
Use Menu 8 4 to choose the tone played when you receive a
text message. Scroll to a tone to hear how it sounds.
Keypad tones
Use Menu 8 5 to adjust the volume of the tones your phone
makes when you press its keys.
Warning and game tones
Use Menu 8 6 to turn your phone’s warning and game tones
on or off. Warning tones are created by events such as
confirmations, errors, power on, battery low, and recharge
battery.
Vibrating alert
If your phone has a vibrating battery attached, use Menu 8
7 to set your phone to vibrate when you receive a voice call.
If you turn vibrating alert on, your phone will vibrate even if
its ringing option is set to Silent.
Note: The vibrating battery does not vibrate when your
phone is connected to or placed in any charging device.
22
Quick alert settings
You can quickly adjust your phone’s
sound settings when you go into a
meeting, go outdoors, etc. To choose a
quick alert setting, briefly press the
key, scroll to the setting you want,
then press OK.
Tip: Instead of using the scroll keys, you can press the
key repeatedly to scroll through this menu. After you
reach the setting you want, press and hold the
key.
Note: If you choose Silent or Quiet, the alarm clock will
only sound a quiet beep.
My tones Uses the settings you have made in Menu 8, My
tones.
Silent All sound is turned off.
Quiet Your phone beeps once when you receive a call or
text message. Other tones are turned off.
Loud Your phone rings loudly. Other tones are not affected.
Headset Automatically selected when your phone is
connected to a headset. Remembers any changes you make
to settings in Menu 8, My tones, and uses them the next
time you connect the phone to a headset.
Car Automatically selected when your phone is connected
to a car kit. Remembers any changes you make to settings in
Menu 8, My tones, and uses them the next time you connect
the phone to a car kit.
Note: If the Silent, Quiet, or Loud quick alert setting is
chosen and you change a setting in Menu 8, My tones, the
phone switches the current quick alert setting to My tones.
Voice mailbox number
If you have a voice mail subscription, use Menu 2 2 2 to
save the voice mailbox number given to you by your service
provider. This number may be up to 32 digits long. Once you
save your voice mailbox number, you can press and hold the
key to dial your voice mailbox. (You can also press
briefly and then press Call.)
23
For more information on voice mail, see ‘Voice messages’ on
Voice privacy
Available only in digital networks, voice privacy encrypts the
voice channel so it is more difficult for anyone to eavesdrop
on your conversations. Use Menu 4 4 1 to turn voice privacy
on or off.
This feature may not be available in all areas; contact your
service provider for details. If voice privacy becomes inactive,
the phone beeps and displays Voice privacy not active.
Welcome note
Use Menu 2 3 to create or change the
welcome note for your phone. This
note is displayed briefly each time you
turn on your phone. It can be your
name, a reminder, etc. To save the
note, press Options, then Save. To erase the note, press
Options, then Erase.
24
6. Emergency calls
1
2
If the phone is not on, switch it on.
Press and hold the
key for several seconds to
ready the phone for calls.
3
4
Key in the emergency number for your present location
(e.g. 911 or other official emergency number). Emergency
numbers vary by location.
Press Call.
IMPORTANT!
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions which cannot guarantee connection
in all conditions. Therefore you should never rely solely upon
any wireless phone for essential communications
(e.g. medical emergencies).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all wireless
phone networks or when certain network services and/or
phone features are in use. Check with local service providers.
If certain features are in use (Keyguard, call restrictions, etc.),
you may first need to turn those features off before you can
make an emergency call. Consult this document and your
local cellular service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible.
Remember that your wireless phone may be the only means
of communication at the scene of an accident - do not cut
off the call until given permission to do so.
25
Emergency key 9
Use Menu 4 1 1 to turn on this feature. When this feature is
on, the phone attempts to make an emergency call when
you:
•
•
press and hold the 9 key, or
press 9, then press Call.
Note: When Keyguard is active, the only way to make an
emergency call is to dial the emergency number, then press
Call.
IMPORTANT!
Official emergency numbers (for example, 911) vary by location.
Only one number is dialed automatically by Emergency Key 9,
and it might not be the proper number in all circumstances.
26
7. Advanced functions
Network feature setting
Call forwarding, call waiting, and send own number are
network services available through your service provider.
These features do not appear in your phone’s Network
services menu until you save the related feature code(s)
given to you by your service provider. After you save the
feature activation or cancellation code, the feature appears
in the phone’s menu and you can use the menu to turn the
feature on or off.
Note: Feature codes can be saved only when your primary
phone number (NAM 1) is selected. See page 32.
Adding feature activation codes to the menu
To save a feature activation code, press Menu 4 4 2. At the
Feature code: prompt, enter the feature activation code,
then press OK. Scroll to the feature that the code applies to,
then press Select. (If the feature is call forwarding, choose
one of the four types of call forwarding.) Finally, scroll to
Activate, then press OK.
Activate will now appear in the menu for that feature.
Adding feature cancellation codes to the
menu
To save a feature cancellation code, press Menu 4 4 2. At the
Feature code: prompt, enter the feature cancellation code,
then press OK. Scroll to the feature that the code applies to,
then press Select. (If the feature is call forwarding, choose
one of the four types of call forwarding.) Finally, scroll to
Cancel, then press OK.
Cancel will now appear in the menu for that feature.
27
In-call menu
When you are in a call, the function of the Navi™ key is End.
However, your phone has an in-call menu that allows you to
perform several functions while in a call. To use the in-call
menu, press
while you are in a call, then press Options.
Press
to scroll to the first item in the menu, or to
scroll to the last item in the menu.
The in-call menu is:
Answer
Swap
answer a waiting call
switch between two calls
New call
End
make a call when you have one in progress
end all calls
Phone book
Menu
Touch tones
access the phone book
access your phone’s menu
send touch tones
Mute/End mute mute/unmute the phone’s microphone
Making/receiving multiple calls
Making a new outgoing call
While you are in a call, select New call from the in-call
menu. Enter the number (or press Search to locate the
number in the phone book), then press Call. The first call is
automatically put on hold while you are in your new call.
Note: This feature might not be supported in your network.
Contact your service provider for details.
Three-way calling
Note: This feature might not be supported in your network or
might work differently than described. For more information,
contact your service provider.
To create a three-way call, call the first person. Then select
New call from the in-call menu, enter or find the phone
number of the second person, press OK and then press Call.
The first person is put on hold. After the second person
answers, choose Connect all from the in-call menu. Now all
three of you can talk to each other at the same time.
28
Ending calls
Press End or select End from the in-call menu.
Note: The wireless network does not support ending
individual calls when more than one call is in progress.
Call waiting
Call waiting is a network service that allows you to receive
an incoming call when you’re already in a call. Contact your
service provider for details.
Answering a waiting call
Note: Call waiting is a network service that requires a
subscription from your service provider.
If you are in a call with someone and another person calls
you, the function of the Navi™ Key changes from End to
Options. Press Options. The in-call menu appears with
Answer selected. Press OK.
Swapping between calls
When you are in a call and you receive an indication of a
waiting call, select Answer from the in-call menu. Your first
call will be put on hold. To swap back to the first call, select
Swap from the in-call menu.
Cancelling call waiting: standard method
To cancel call waiting before making a call, you must get
the call waiting cancellation code from your service
provider.
1
Dial the code for cancelling call waiting followed by the
phone number you want to call.
2
Press Call.
Example: If the code for cancelling call waiting is #43# and
the number you want to call is (416) 555-1234, dial
#43#4165551234, then press Call.
29
Cancelling call waiting: menu method
You can save the code for cancelling call waiting given by
your service provider and then use the Menu 4 4 4 2 to
cancel call waiting. See ‘Adding feature cancellation codes
Call forwarding
Call forwarding is a network service that lets you forward
your incoming calls to another phone number. Check with
your service provider for details and feature codes.
Activating call forwarding
Standard method
To activate call forwarding, you must get the call forwarding
activation code from your service provider.
1
Dial the code for activating call forwarding followed by the
phone number to which you want to forward your calls.
2
Press Call.
Example: If the call forwarding activation code is *21* and
the number you want to forward calls to is (416) 555-1234,
dial *21*4165551234, then press Call.
Menu method
You can save the code for activating call forwarding and
then use the menu to activate call forwarding. See ‘Adding
Cancelling call forwarding
Standard method
To cancel call forwarding, you must get the call forwarding
cancellation code from your service provider.
1
Dial the code for cancelling call forwarding (for example,
#21#).
2
Press Call.
30
Menu method
You can save the code for cancelling call forwarding and
then use the menu to cancel call forwarding. See ‘Adding
1-touch dialing
This feature allows you to make phone calls quickly and
easily with the touch of a button. Once you have assigned a
phone number to a number key (2 through 8), you can press
and hold that key to dial the number. (You can also press the
number key briefly and then press Call.)
Note: Keys 1 and 9 are used exclusively for dialing your voice
mailbox and for attempting emergency calls, respectively
page 25).
Assigning numbers to keys
Before you can assign a phone number to a key, the phone
Then follow the steps below.
1
2
3
Press Menu 1 6.
Scroll to the desired key, then press Assign.
Press
or
to choose the name you want to assign
to the selected key, then press Select.
If a key already has a number assigned to it, you can press
Options and then view, change, or erase the number
assignment.
Making calls using one-touch dialing
Press and hold a number key (2 through 8) for a few seconds
to call the number assigned to it. Your phone finds the
phone number, displays it briefly, then dials it.
You can also enter the number of the 1-touch dialing key
(for example, 2) and press Call.
31
Choosing your phone number
(NAM selection)
Your service provider can set up your phone to have two
phone numbers that are activated in different service
areas—for example, one number for the Toronto area and
one number for the Montreal area.
A number assignment module, or NAM, consists of a phone
number and network information that the service provider
programs into your phone. When you select a NAM, you’re
not only selecting a phone number, you’re also selecting a
home system in which you will not be charged roaming fees.
The two NAMs are not equal. Some features, such as
primary NAM is selected.
Use Menu 4 5 to select a NAM.
Send own number
This network service allows you to hide your phone number
from a person you are calling who has Caller ID. (If for some
reason your network prevents phone numbers from being
displayed, you may be able to use this feature to show your
number to the person you are calling.) Contact your service
provider for feature codes for showing/hiding your phone
number.
Standard method
1
Dial the feature code followed by the number you want
to call.
2
Press Call.
Example: If the feature code to hide your number is *67 and
the number you want to dial is (416) 555-1234, dial
*674165551234, then press Call.
32
Menu method
You can save the feature code given by your service provider
so that Send own number appears in your phone’s menu,
This feature must be activated before each call.
Yes displays your number to the person you are calling.
No prevents your number from being shown to the person
you are calling.
Calling card calls
Before you can make a call using a calling card, you have to
enter your calling card information into the phone. See
To make a call using a calling card:
1
Enter the phone number, including any prefix (such as 0
or 1) that your calling card may require when you make
a calling card call. See your calling card for instructions.
2
3
4
Press and hold Call for a few seconds until your phone
displays Card call.
Your phone displays Wait for tone, then press OK.
Wait for the tone, then press OK.
Your phone displays Wait for tone, press OK again.
Wait for the tone again, then press OK.
System selection
Your phone is capable of working in residential, private, and
public systems. You can choose how your phone selects a
network to use.
This feature is Menu 5 in your phone. The default is Automatic,
which means your phone automatically searches for networks
available to you and chooses the appropriate one. Every time
you switch on your phone, Automatic is selected.
33
If you choose Manual, your phone displays a list of available
and unavailable networks. (You can’t use unavailable networks.)
Scroll through the choices and press OK when you reach the
one you want.
If you choose New Search, your phone begins a new search
for new private and residential systems. When it finds the
best new system, it displays it. You can then select it or start
another search by pressing Next.
Note: The Manual and New search features can be used
only when your primary phone number (NAM1) is selected.
To switch from private to public
If you are in a private system and want access to a public
system, press and hold Menu when you are not in a call.
Your phone will display Search public systems? Press OK
and your phone will use the public system for the next
outgoing call. After the call it will revert to Automatic
system selection.
Automatic answer
This feature is available only when your phone is connected
to a headset or to an approved handsfree car kit equipped
with the ignition sense option, with the ignition on.
When automatic answer is turned on, your phone answers
incoming voice calls after one ring. Use Menu 4 1 4 to turn
this feature on or off.
Touch tones
Your phone can generate various sounds, called touch tones,
when the keys are pressed.
Touch tones can be used for many automated services such
as checking voice mail, movie times, and airline arrival/
departure times.
Note: Sending confidential information over the air using
touch tones is not recommended.
34
Setting manual touch tone length
Use Menu 4 2 1 1 to set the length of touch tones created
when you press a key:
Continuous means the tone sounds for as long as you press
and hold the key.
Fixed sets the tone length to one tenth of a second,
regardless of how long you press and hold the key.
Off turns off touch tones. No tones will be sent when you
press the keys.
Setting automatic touch tone length
Use Menu 4 2 1 2 to set the length of touch tones sent
automatically by the phone to Short (one tenth of a second)
or Long (half a second).
Saving touch tone strings
Touch tone strings can be used for sending and receiving
information with your phone. Save touch tone strings the
For example, you can save your office voice mailbox number
along with your password for easy access to your messages.
Sending touch tone strings
1
During a call, press
display.
to clear any numbers from the
2
3
4
Press Options.
Scroll to Touch tones, then press OK.
Enter or find the touch tone string, then press OK.
Restore factory settings
You can use Menu 4 2 3 to reset many of the settings in
your phone to their factory defaults (as in a new phone).
You will be required to enter the security code.
Note: The phone book, language setting, call timers, security
code, and lock code are not affected.
35
8. Phone book
Your phone allows you to save 100 phone numbers and
associated names so they are right at your fingertips for
easy dialing.
Saving names and numbers
Saving a name and number is easy!
Just enter the phone number, press
or
, then press Save. Enter a
name if you wish, then press OK.
Each name may consist of up to 16
characters and each phone number may consist of up to
32 characters.
Saving a number quickly
To save a number quickly, enter the phone number, press
or
, then press and hold Save. The number is saved
to your phone book and you can add a name to it later
Saving a name and number while in a call
To save a name and number while in a call:
1
2
3
4
5
6
Press
.
Press Options.
Scroll to Phone book, then press OK.
Scroll to Add new, then press Select.
Enter a name if you like, then press OK.
Enter the phone number, then press OK.
The entry is displayed in your phone list. Press Call to call
the number or
to clear the screen (the current call
will not be affected).
36
Notes about saving names
•
A name may appear only once in memory. If you try to
save a name that already exists in memory, the phone
asks if you want to replace the existing name.
•
If you try to save a phone number and your phone book
is full, you are given the option to replace an existing
entry. Scroll to the entry you want to replace and press
OK, or press
to cancel.
Finding names and numbers
There are several ways to find names and numbers in your
phone book.
From the start screen
Press
to access your phone book, then scroll to the
desired name/number.
Tip: You can also press the number key that corresponds
to the first letter of the name. The first matching entry
is displayed at the top of the screen.
Using the Phone book menu
Press Menu 1 1, enter the first few
letters of the name, then press OK.
Your phone displays the first matching
entry at the top of the screen.
While performing other functions
Say you want to forward your phone
calls to a number that is saved in your
phone book. When you are prompted
to enter the phone number, you can
find it instead—simply press Search to
access your phone book.
37
Editing names and numbers
To edit phone book entries, press Menu 1 3, scroll to the
entry you want to edit, then press Edit. Edit the name and
number as needed.
Erasing names and numbers
Use Menu 1 4 to erase entries from your phone book.
One by one lets you select one entry at a time to be erased.
Erase all erases your entire phone book (you will be required
to enter your security code first).
Scrolling view
Use Menu 1 5 1 to choose a scrolling view for your phone
book (Name list, Name+number, or Name only).
Tip: If your phone book’s scrolling view is set to
Name list or Name only, you can view the phone
number associated with a name by pressing and
holding the
key.
Checking available memory
Use Menu 1 5 2 to see how many memory locations are free
and how many are being used. (Each memory location holds
one phone number and associated name.)
38
9. Call log
For your convenience, the call log (Menu 3) saves a list of
phone numbers you have dialed, and can show you how
much time you have spent on the phone. If you subscribe to
the caller ID network service, the call log also records the
phone numbers of missed calls and received calls. Contact
your service provider for details.
The Options key
When you access Missed calls, Received calls, or Dialed
calls and press Options, a list of options appears on your
phone’s display.
Call dials the number.
Call time shows the time of the last call. (Your phone’s
clock must be set; see page 20.)
Edit number allows you to edit the number.
Save allows you to enter a name for the number, edit the
number if needed, and save both to your phone book.
Erase erases the number from the call list.
View number displays the associated phone number if only
the name is currently displayed.
Missed calls
If you subscribe to the caller ID network service, your phone
automatically stores the last 10 numbers that have tried
unsuccessfully to reach you (as long as the caller allowed
his or her number to be shown to you).
When the display says Missed calls
Press List. If you have missed more than one call, you can
scroll through the list of numbers. To dial the displayed
number, press Options, then choose Call.
39
Viewing the missed calls list at any time
Use Menu 3 1 to view the missed calls list at any time.
To dial a number, press Options, then choose Call.
Received calls
If you subscribe to the caller ID network service, your phone
automatically stores the phone numbers of the 10 most
recent calls you’ve answered. Use Menu 3 2 to view the
received calls list. To dial a number, press Options, then
choose Call.
Dialed calls
Your phone automatically stores the last 10 numbers you’ve
dialed. From the start screen, press
to access the dialed
calls list. Scroll to the desired number, then press Call.
the dialed calls list by pressing Menu 3 3.
Clearing call lists
Use Menu 3 4 to clear the missed, received, and/or dialed
call lists.
Call timers
Use Menu 3 5 to see the amount of
time you’ve spent in calls. Times are for
the currently selected phone number;
your phone has a separate timer for
each phone number, or NAM
Note: The actual time invoiced for calls by your service
provider may vary, depending upon network features,
rounding-off for billing, and so forth.
40
Viewing call timers
Use Menu 3 5 to view the various call timers.
Last call is the duration of the last call, or current call if
applicable.
All calls is the duration of all calls since the timers were last
reset.
Life timer displays the duration of all calls for the life of
your phone and cannot be reset.
Setting timers back to 0
Use Menu 3 5 4 to clear call timers. You will be required to
enter your security code.
Displaying the current call timer during calls
1
2
3
4
Press Menu 3 5 1.
Press Details.
Press Select.
Scroll to On, then press OK.
During a call, the amount of time spent in that call will be
displayed.
41
10. Voice messages
Voice mail is a network service that allows callers to record
a message when you cannot be reached. You can then call
your voice mailbox and retrieve your messages.
Saving your voice mailbox number
When you subscribe to voice mail, your service provider will
give you a voice mailbox number. You should save this number
so you can call your voice mailbox by pressing and holding the
Listening to new voice messages
When you receive a voice message, your phone may notify
you by beeping, displaying the voice message indicator
, and displaying New voice message. The phone may
display the number of messages if there is more than one.
Note: The method of notification depends on your service
provider.
When your phone notifies you that you have a new voice
message, press Listen. Your phone dials your voice mailbox
number, if you have saved it.
Calling your voice mailbox at any time
Once you have saved your voice mailbox number, you can
press and hold the
key to dial your voice mailbox.
42
11. Text messages
The text message network service allows you to receive text
messages from a variety of sources, such as a Web page set
up by your service provider. Contact your service provider for
more information.
Reading messages
When you receive a text message, the phone displays the
indicator, either Message received or New
emergency message (if an emergency message has been
received), and makes a sound (depending on the message
To read the message, press Read. This takes you to the
Inbox, with the new message selected. Press Read again.
If necessary, use the scroll keys to read the entire message.
After reaching the end of the message, use the scroll keys to
view the sender’s name or phone number, and the date and
time the message was received.
Options when reading messages
Several options are available while you’re reading a message.
Just press Options, scroll to the one you want, then press OK.
Read next allows you to read the next message.
Erase deletes the message. Press OK to confirm the deletion
(or
to cancel).
Save saves the message in the Saved folder.
Call back calls any displayed phone number included in the
message. If more than one number was included, a list of
numbers is displayed. Choose one and press Call.
When you’ve seen the last new message, the
disappears.
indicator
43
About the Inbox
The Inbox holds text messages that have not been deleted or
saved. Use Menu 2 11 to access the Inbox at any time.
You will see a list of message headers. The
of the header indicates that a message has been read.
The icon indicates that a message has not been read.
icon in front
Scroll to the desired message, then press Read.
About the Saved folder
The Saved folder holds up to 30 saved text messages.
Use Menu 2 1 2 to access the Saved folder and read
saved messages.
Storage of incoming messages
When you have an incoming text message and your phone’s
memory is full, one or more low-priority messages, which
have been read, will automatically be deleted in order to
receive the new text message. Messages are usually deleted
from your Inbox, but an emergency message may cause
messages to be deleted from the Saved folder.
If the message memory is still full, your phone will display
No space: message waiting. You can clear this notification
by pressing OK. You should delete one or more old messages
to make room for the new message. The network will re-send
the message at a later time.
Erasing all text messages
Use Menu 2 1 5 to access the Erase all option for Text
messages. Erase all allows you to permanently erase all
messages from one of the following categories:
All read
Erases all read messages in the inbox
All in inbox Erases all messages in the inbox
All saved
Erases all messages stored in the Saved folder
All in outbox Erases all messages in the outbox
44
Writing and sending text messages
Note: The availability of writing and sending text messages
may vary according to your wireless service provider, and you
must subscribe to the text messaging network service. Please
contact your service provider for details.
The phone allows you to write a text message using your
keypad. Once you have written a message on your screen,
you will have options for sending your message.
Writing a text message
1
2
Press Menu 2 1 3 and select Write new
Write your text message by entering letters and numbers
from your keypad
3
The function of the Navi™ key will change to Options
Your Options menu is:
Send
Back
send the message
return to the Text messages menu
Clear screen clear all entered text from the screen
Settings
Save
choose a setting for your message
store the text message to Saved
Sending a text messages
1
2
3
Write a text message and press Options
To send the message, highlight Send and press OK
Enter the phone number (or press Search to locate the
number in the phone book), then press Send
Message settings
This network feature allows you to mark your text message
as urgent, place your number within the text message, or
request a read receipt. This is a network feature. Contact
your service provider for more information.
45
Message settings are located in the Write new options
menu as Settings. You may select or deselect the following
settings by pressing Mark or Unmark.
Urgent
notify recipient that your message is
important
Read receipt notify you that the recipient has opened your
message
Callback no. place your phone number within the message
Received Urgent messages are indicated with an
exclamation mark (!) in front of the message.
Note: Callback no. is the default setting for your phone.
About the Outbox
Use Menu 2 1 4 to access the Outbox. The Outbox stores
messages that were sent successfully as well as messages that
were sent unsuccessfully. The
heading shows that you have sent the message to the text
message center. The icon shows that you attempted to
icon in front of a message
send the message, but your attempt was unsuccessful.
Press Read to read the selected message.
Forwarding and replying to a message
You can forward or reply to messages which are located in
the Inbox, Saved folder or Outbox of your phone. Highlight
the message and press Read. The Options menu appears.
Forwarding a text message
1
2
3
4
Highlight the message that you want to forward
Press Read, then press Options
Scroll to Forward, press OK
Send the message as you normally would
46
12. Extra features
Alarm clock
The alarm clock feature is based on
your phone’s internal clock and sounds
an alert at a time you specify.
Setting the alarm clock
Use Menu 7 1 to turn the alarm clock on or off.
Note that when you’re entering the alarm time, use two
digits for both hours and minutes (for example, enter 1:30
am/pm, you will be asked to choose am or pm.
Note: The
key does not work on this screen. If you
make a mistake, re-enter all four digits.
Alarm volume
The alarm volume is determined by the current ringing
volume. However, if you have manually set the ringing
phone only sounds a quiet beep.
When the alarm sounds
•
To shut off the alarm, press any key except Snooze.
•
If you press Snooze, the alarm sounds again in 10
minutes. To turn off the alarm before then, press Stop.
•
If you let the alarm sound for one minute without
pressing a key, it stops for 10 minutes, then starts again.
If you turn off the phone
If you turn off the phone and the alarm is set, the phone
switches itself on at alarm time, then the alarm sounds.
48
•
•
To shut off the alarm, press any key except Snooze.
The phone displays Keep the phone on? Press Yes to
keep it on or
to switch it off.
If you press Snooze, the phone turns itself off for 10
minutes, then the alarm sounds again.
REMEMBER! Do not switch on the phone when wireless
phone use is prohibited or when it may cause interference
or danger.
Games
Use Menu 6 to challenge yourself or a friend to the three
fun games in your phone. To pause a game, press
.
To resume, choose Continue.
REMEMBER! Your phone must be switched on to use this
function. Do not switch on the phone when wireless phone
use is prohibited or when it may cause interference or
danger.
Memory
Reveal pictures to find pairs in as few tries as possible. Move
the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down)
keys. Press the 5 key to reveal pictures. Once found, pairs
stay visible. Press the
revealed pictures or to move from the bottom right of the
screen to the top left. Press the key to jump to the left
key to jump to the right over
over revealed pictures or to move from the top left of the
screen to the bottom right.
Snake
Feed the snake with as many goodies as possible and watch it
grow. Use keys 2, 4, 6, and 8 to turn the snake toward food.
The longer the snake’s tail grows, the higher your score. If the
snake hits its own tail or the surrounding wall, the game is
over.
49
Logic
Find the secret combination of figures in a column. Possible
figures are shown at the top of the display. Press the 5 key
repeatedly to select a figure and the 2, 4, and 8 keys to move
the cursor. Once you think you have the right combination,
press the
key. The result appears as a set of marks above
the column. A correct figure in the right place gets a full
mark; a correct figure in the wrong place gets a half mark.
The game ends when the correct figures are in the right place.
Tip: To copy a figure from the previous column, move
the cursor over it using the 2, 4, or 8 key, then press
the 5 key.
50
13. Security features
Access codes overview
Access codes consist of the lock code and security code.
When you get your phone, you should change these codes
from their defaults, write down the new codes, and keep
them in a safe place away from the phone. Avoid using
access codes that are similar to emergency numbers, such as
911, to prevent accidental dialing of the emergency number.
Lock code
Your phone’s lock code is used to lock and unlock your phone.
The default lock code is 1234. Use Menu 4 3 2 3 to change
the lock code.
When the phone requires the lock code, it displays Enter
lock code: Enter the code, then press OK.
If you enter a wrong lock code five times in succession, your
phone prompts you for the security code.
Security code
The security code is required to restrict calls and to restore
factory settings. The default security code is 12345. Use
Menu 4 3 2 4 to change the security code.
When the phone requires the security code, it displays
Security code: Enter the code, then press OK.
If you enter an incorrect security code five times in succession,
the phone will not accept any input for the next five minutes.
Restricting calls
Use Menu 4 3 1 to restrict outgoing or incoming calls. This is
handy if you want to lend your phone to someone but don’t
want them to make long-distance or other expensive calls.
51
Restricting incoming calls
Choose Restrict incoming calls to prevent your phone from
receiving incoming calls. Enter your security code, then
press OK. Press Mark, then press
this change (or to cancel).
. Press Yes to save
Note: This feature requires the caller ID network service, and
the caller’s ID must be available to the phone in order for the
restriction to work.
Allowing incoming calls
To allow incoming calls once again, choose Restrict incoming
calls and enter your security code. Press Unmark, then press
. Press Yes to save this change (or
to cancel).
Restricting outgoing calls
You can create a list of numbers to which outgoing calls
cannot be made. A call restriction can consist of an entire
phone number, an area code, etc. When the restriction is
selected, calls cannot be made to any number beginning
with those digits. For example, entering 2145551234 will
block calls to (214) 555-1234 only. 1 will block all calls
starting with 1, including long distance calls and 1-800
calls. 1800 will block 1-800 calls only.
Adding numbers to the restricted outgoing calls list
To prevent your phone from making outgoing calls, choose
Restrict outgoing calls. Enter your security code, then press
OK. Continue with the steps illustrated below.
1
2
Add restriction is selected. Press OK.
Enter the phone number, area code,
etc. to which you want to restrict
calls, then press OK.
52
3
If you want, give a name of up to
10 characters to the restriction
(such as Joey, Long dist, or 1-800
#s), then press OK.
The entry is added to your list of
restricted numbers.
Allowing calls to a number on the list
If you later decide to allow calls to a
restricted number, press Select to see
your list of numbers. Press Unmark to
remove the restriction. (The number
remains in the list so that you can
restrict it again later by pressing Mark.) When you’re done,
press
. Press Yes to save your changes (or
to
cancel).
Making changes to the restricted outgoing calls list
To edit or completely erase an entry in the list, choose Edit
or Erase, select the entry you want to edit or erase, and
follow the instructions on the screen.
Phone lock
You can prevent unauthorized use of your phone by locking
it. When your phone is locked, only incoming calls and calls
to the unlocked phone number (see below) are allowed.
The memory and menu are unavailable.
Note: Calls may still be possible to emergency numbers.
How to lock your phone
press OK. Scroll to On, then press OK.
How to unlock your phone
Press Menu, enter the lock code, then press OK.
53
Answering a call when the phone is locked
Press Answer.
Saving the unlocked phone number
Use Menu 4 3 2 2 to save a number that may be called even
when your phone is locked. You will be required to enter the
lock code.
Calling the unlocked phone number
Press
or
, or manually enter the number exactly as it
is saved, then press Call.
54
14. Accessories
An extensive range of accessories
is available for your phone. You
can select the accessories that best
suit your specific communication
needs. For availability, see your
local authorized Nokia dealer.
A few practical rules for accessory
operation:
•
•
Keep accessories out of small children's reach.
When you disconnect the power cord of any accessory,
grasp and pull the plug, not the cord.
•
•
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Installation of complex car equipment must be
completed by qualified personnel only.
WARNING!
Use only batteries, chargers and accessories approved by
the phone manufacturer for use with this particular phone
model. The warranty does not cover defects or damages
caused by a product which is not a Nokia Original
Accessory.
Nokia Xpress-on™ colour covers
Your phone’s Xpress-on™ cover is available in several
fashion colours. Extra covers may be purchased from your
authorized Nokia dealer.
Note: Always store the phone with cover attached.
55
Changing covers
When changing covers, don’t use the phone’s antenna as
leverage!
1
Switch off the power and disconnect the phone from
the charger or any other device.
2
Using a coin, depress the
coloured tab on the top
of the phone and slide
the colour cover
forward.
3
Remove the cover.
4
Remove the rubber
keypad from the back of
the cover. Place it into
the back of the new
cover.
56
5
Place the bottom of the
cover against the
bottom of the phone.
Make sure all three sets
of plastic tabs line up
with their respective
slots, as shown at left.
Close the cover and snap
it shut all the way
around the edge of the
phone.
57
Batteries
Several batteries are available for your phone:
•
•
•
•
BLS-2N Extended Li-Ion 900 mAh
BMS-2S Extended NiMH 900 mAh
BMS-2V Vibrating NiMH 900 mAh
BLS-4 Ultra Extended Li-Ion 1500 mAh
Charging times
The table below displays approximate battery charging
times. These charging times will charge your phone to
about 80% of its capacity, and the battery strength
indicator will stop scrolling. If you wish to obtain 100%
battery capacity, please allow another two hours for
“maintenance” charge.
Rapid Cig.
Standard
Travel Charger
ACP-7U
Rapid Travel
Charger
ACP-9U
Lighter
Charger
LCH-9
Battery
BLS-2N
Extended Li-Ion
900 mAh
2 hours
2 hours
BMS-2S
Extended NiMH
900 mAh
1 hour
30 minutes
1 hour
30 minutes
4 hours
5 hours
BMS-2V
Vibrating NiMH
900 mAh
1 hour
30 minutes
1 hour
30 minutes
BLS-4
Ultra Extended
Li-Ion 1500 mAh
3 hours 30 minutes
58
Talk and standby times
Talk Time
Standby Time
Battery
Digital
Analog
Digital
Analog
BLS-2N
Extended
Li-Ion 900 mAh
2 hrs to
3 hrs 15 min 1 hr 45 min
1 hr to
100 to
200 hrs
30 to
50 hrs
BMS-2S Extended
NiMH 900 mAh
2 hrs to
3 hrs 15 min 1 hr 45 min
1 hr to
100 to
200 hrs
30 to
50 hrs
BMS-2V Vibrating
NiMH 900 mAh
2 hrs to 1 hr to
3 hrs 15 min 1 hr 45 min
100 to
200 hrs
30 to
50 hrs
BLS-4 Ultra Extended
Li-Ion 1500 mAh
3 to
5 hrs
1 hr 30 min to
2 hrs 45 min 335 hrs
170 to
50 to
83 hrs
Note: The times shown are approximate. Battery operation
times vary according to signal conditions, network parameters
set by the service provider, and how you use your phone.
Chargers and other accessories
WARNING!
This apparatus is intended for use when supplied with power
from the Standard Travel Charger (ACP-7U), Rapid Travel
Charger (ACP-9U), or Rapid Cigarette Lighter Charger
(LCH-9).
The following chargers and other accessories are available
for your phone; please see your dealer for details. Also, refer
to any accessory options manual that may have been
included in your sales package for the entire line of Nokia
Original Accessories.
Note: When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger
for longer than a week, since overcharging may shorten its
life. If left unused, a fully charged battery will discharge itself
over time.
59
ACP-7U Standard Travel Charger
Use this durable and economical
charger to charge all battery options.
Plug the charger into a wall outlet
and connect the connector to the
bottom of your phone. Check the
charging status on the phone display.
Calls can be made during charging,
but charging will stop for the
duration of the call.
Note: If the battery is completely empty, you cannot use the
phone until it has enough charge to operate.
The Standard Travel Charger is available for different voltage
levels and can also be used with the DCH-9 Compact Desktop
Charging Stand.
ACP-9U Rapid Travel Charger
The extremely light, functionally
designed Rapid Travel Charger
charges your phone battery quickly.
Plug the charger into a wall outlet and
connect the connector to the bottom of
your phone. Check the charging status
on the phone display. You can use your
phone while charging.
Operating within a voltage range of 100V-240V AC
(50Hz-60Hz), the Rapid Travel Charger is practically
voltage-independent in normal office and household use.
Like the Standard Travel Charger, the Rapid Travel Charger is
compatible with all battery options. The Rapid Travel
Charger can also be used with the DCH-9 Compact Desktop
Charging Stand.
60
LCH-9 Rapid Cigarette Lighter Charger
The multivoltage Rapid
Cigarette Lighter Charger
allows you to charge your
phone when you travel. The
small charger's functional
design fits well with most car
lighters and interiors.
Charging times are the same as for the Rapid Travel Charger
ACP-9U. Calls can be made during charging.
A green light indicates that the Rapid Cigarette Lighter
Charger is ready to charge. Check the charging status on the
phone display. The input voltage is 12 or 24 V DC, negative
grounding.
The Rapid Cigarette Lighter Charger can be used with all
accessories available for your phone.
Avoid prolonged charging with the Rapid Cigarette Lighter
Charger when the car engine is not running. This may cause
the battery of your car to drain.
Note: In some cars the cigarette lighter plug is not provided
with power when the ignition is switched off. Verify that the
green LED light is lit.
DCH-9 Compact Desktop Charging Stand
Compatible with all
battery options, the
Compact Desktop
Charging Stand can be
used with the Standard
Travel Charger ACP-7U
or the Rapid Travel
Charger ACP-9U. The
Compact Desktop Charging Stand provides mounting for
both the phone and a spare battery. Plug the charger into a
wall outlet and connect the connector to the back of the
Compact Desktop Charging Stand. Place your phone and/or
a spare battery in the stand to begin battery charging.
61
When the phone is charging, no lights are displayed on the
stand; check the charging status of the phone battery on
the phone display.
Charging moves to the rear slot once the front battery is
100% charged.
When the spare battery is charging, check the status
indicator on the left side of the charging stand. A red light
indicates that the battery is charging; a green light
indicates that the battery is charged to at least 80% of its
capacity.
DCH-9 Rear Slot Charging Times
Using ACP-7U
Using ACP-9U
Battery
Front slot Front slot Front slot Front slot
empty
occupied
empty
occupied
BLS-2N
Extended
Li-Ion 900 mAh
6 hours,
8 hours,
4 hours,
5 hours,
BMS-2S Extended
NiMH 900 mAh
30 minutes 30 minutes 30 minutes 30 minutes
BMS-2V Vibrating
NiMH 900 mAh
BLS-4 Ultra Extended
Li-Ion 1500 mAh
15 hours,
45 minutes
10 hours,
30 minutes
12 hours
8 hours
The phone has the built-in intelligence to maintain the
battery, so there is no need for a discharge feature on the
stand.
62
15. Reference information
Important safety information
Traffic safety
Do not use a hand-held telephone while driving a vehicle. If using a
hand-held phone park the vehicle before conversing. Always secure
the phone in its holder; do not place the phone on the passenger seat
or where it can break loose in a collision or sudden stop.
The use of an alert device to operate a vehicle’s lights or horn on
public roads is not permitted.
Remember, road safety always comes first!
Operating environment
Remember to follow any special regulations in force in any area and
always switch off your phone whenever it is forbidden to use it, or
when it may cause interference or danger.
When connecting the phone or any accessory to another device, read
its user’s guide for detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting equipment, users are advised
that for the satisfactory operation of the equipment and for the
safety of personnel, it is recommended that the equipment should
only be used in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded from radio frequency
(RF) signals. However, certain electronic equipment may not be
shielded against the RF signals from your wireless phone.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
6 inches (20 cm.) be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research
by and recommendations of Wireless Technology Research.
63
Persons with pacemakers:
•
Should always keep the phone more than 6 inches (20 cm) from
their pacemaker when the phone is switched on;
•
•
Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to minimize the
potential for interference.
•
If you have any reason to suspect that interference is taking
place, switch off your phone immediately.
Hearing aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may want to consult your
service provider.
Other medical devices
Operation of any radio transmitting equipment, including cellular
phones, may interfere with the functionality of inadequately
protected medical devices. Consult a physician or the manufacturer
of the medical device to determine if they are adequately shielded
from external RF energy or if you have any questions. Switch off your
phone in health care facilities when any regulations posted in these
areas instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (e.g. electronic fuel injection
systems, electronic anti-skid (anti-lock) braking systems, electronic
speed control systems, air bag systems). Check with the manufacturer
or its representative regarding your vehicle. You should also consult
the manufacturer of any equipment that has been added to your
vehicle.
Posted facilities
Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres
Switch off your phone when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone while at a refueling point
(service station). Users are reminded of the need to observe restrictions
64
on the use of radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats; chemical
transfer or storage facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air contains chemicals
or particles, such as grain, dust or metal powders; and any other area
where you would normally be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone, or install the
phone in a vehicle. Faulty installation or service may be dangerous
and may invalidate any warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
Do not store or carry flammable liquids, gases or explosive materials
in the same compartment as the phone, its parts or accessories.
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment, in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
Switch off your phone before boarding an aircraft. The use of wireless
telephones in an aircraft may be dangerous to the operation of the
aircraft, disrupt the wireless telephone network and may be illegal.
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Emergency calls
IMPORTANT!
This phone, like any wireless phone, operates using radio signals,
wireless and landline networks as well as user- programmed
functions which cannot guarantee connection in all conditions.
Therefore, you should never rely solely upon any wireless phone
for essential communications (e.g. medical emergencies).
Remember, to make or receive any calls the phone must be switched
on and in a service area with adequate signal strength. Emergency
calls may not be possible on all wireless phone networks or when
certain network services and/or phone features are in use. Check
with local service providers.
65
Making an emergency call
1
2
If the phone is not on, switch it on.
Press and hold the
key for several seconds to
ready the phone for calls.
3
Key in the emergency number for your present location
(e.g. 911 or other official emergency number). Emergency
numbers vary by location.
4
Press Call
If certain features are in use (Keyguard, call restrictions, etc.), you
may first need to turn those features off before you can make an
emergency call. Consult this document and your local cellular service
provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your wireless
phone may be the only means of communication at the scene of an
accident - do not cut off the call until given permission to do so.
Radio frequency (RF) signals
Your wireless handheld portable telephone is a low power radio
transmitter and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals.
In August, 1996, the Federal Communications Commission (FCC)
adopted RF exposure guidelines with safety levels for handheld
wireless phones. Those guidelines are consistent with safety
standards previously set by both U.S. and international standards
bodies:
ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*.
Those standards were based on comprehensive and periodic evaluations
of the relevant scientific literature. For example, over 120 scientists,
engineers, and physicians from universities, government health
agencies and industry reviewed the available body of research to
develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC guidelines
(and those standards).
*American National Standards Institute, National Council on Radiation
Protection and Measurements; International Commission on
Non-Ionizing Radiation Protection.
66
Care and maintenance
Your phone is a product of superior design and craftsmanship and
should be treated with care. The suggestions below will help you to
fulfill any warranty obligations and allow you to enjoy this product
for many years. When using your phone, battery, charger, OR any
accessory:
•
•
•
•
Keep it and all its parts and accessories out of small children’s
reach.
Keep it dry. Precipitation, humidity and liquids contain minerals
that will corrode electronic circuits.
Do not use or store it in dusty, dirty areas as its moving parts can
be damaged.
Do not store it in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt
certain plastics.
•
Do not store it in cold areas. When the phone warms up (to its
normal operating temperature), moisture can form inside the
phone, which may damage the phone's electronic circuit boards.
•
•
•
•
•
Do not attempt to open it. Non-expert handling of the device
may damage it.
Do not drop, knock or shake it. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean it.
Do not paint it. Paint can clog the device’s moving parts and
prevent proper operation.
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications or attachments could
damage the phone and may violate regulations governing radio
devices.
•
If the phone, battery, charger, or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
67
16. Technical information
Transmitting power: Up to 600 mW nominal
Operating voltage:
Frequency band:
3.6 V nominal
lowband 824.04 - 848.97 MHz (TX)
869.04 - 893.97 MHz (RX)
highband 1850.04 - 1909.92 MHz (TX)
1930.08 - 1989.96 MHz (RX)
Number of channels: 832 lowband
1997 highband
Number of NAMs
Memory locations:
Memory capacity:
2
100
16 characters per name
32 characters per number
CANADA
Nokia Products Ltd.
575 Westney Rd. South
Ajax, Ontario L1S 4N7
Tel: (905) 427-6654 1-888-22NOKIA (1 888 226-6542)
Nokia, Connecting People and the Original Accessories logos are
trademarks of Nokia Corporation and/or its affiliates.
The information contained in this User Guide was written for Nokia
phone NSW-1NX.
The right to make changes and improvements to any of the products
described in this guide without prior notice is reserved.
Issue No. 1 Phase 3 © Nokia Mobile Phones. All rights reserved.
These commodities are authorized by the U.S. Government for export
only to Canada, Mexico, or the United States. They may not be
resold, diverted, transferred, or otherwise disposed of in any other
country, either in their original form or after being incorporated
through an intermediate process into other end-items, without the
written approval of the U.S. Department of State.
Part No. 9352569
Printed in Canada
06/00
68
17. NOKIA 1-YEAR LIMITED
WARRANTY
NOKIA warrantsthat the NOKIA wireless phone and accessories
are free from defects in material and workmanship. The warranty
period for the Phone (Radio) units and all accessories
(excluding carry cases) is twelve (12) months from the date of
purchase OR fourteen (14) months from date of wholesale
shipment from NOKIA, OR fifteen (15) months from the date of
manufacture by NOKIA. The warranty period for the Carry cases
is three (3) months from the date of purchase or five (5) months
from the date of wholesale shipment from NOKIA.
During the warranty period, NOKIA will, at its option, repair
or replace the defective product free of charge. Replacement
Product may be either new or remanufactured or refurbished.
However, if NOKIA determines that the warranty conditions
cannot be applied, the purchaser will be billed for the repair
and shipping.
EXCEPTIONS
This warranty is subject to the following exceptions:
1. Mobile or fixed installation, which is not in accordance
with the installation instructions, published by NOKIA, will
void the warranty. Damage caused by a repair or an attempt
to repair by other than a service centre authorized by NOKIA
will void the warranty;
2. This warranty covers normal consumer use and does not
cover defects or damage to any product which, in the sole
opinion of Nokia, has been subject to: improper storage,
exposure to moisture or dampness, exposure to fire, sand,
dirt, windstorm, lightning, or earthquake; to theft, battery
leakage, unauthorized modification, misuse, neglect, abuse,
misapplication, accident, alteration, improper installation,
maladjustment of consumer controls, or abnormal operating
conditions, or which has been attributable to acts of God;
3. Fuses are not covered by the warranty;
4. This warranty does not cover defects or damages caused by
a product which is not approved by NOKIA to be connected to
its wireless phone;
5. This warranty does not cover defects or damages caused by
improper or defective function of the carrier system or by
inadequate signal reception by the antenna;
69
6. Removal and reinstallation costs are not covered by this
warranty;
7. This warranty is applicable only to products bought through
Nokia Products Ltd, in Ajax, Ontario, Canada, and sold either
in Canada or Bermuda.
8. Removal, alteration, or defacing of the Serial Number Plate,
or the accessory Date Code Labels will void the warranty.
In no event shall NOKIA be liable for incidental, special, or
consequential damages, direct or indirect, loss of unanticipated
benefits or profits, loss of use of its wireless telephone,
resulting from the use of its wireless phone, or its accessories,
or arising from any breach of this warranty.
CLAIM PROCEDURE
In order to obtain warranty performance, return the defective
unit to the NOKIA Service Centre with transportation charges
prepaid (Shipping of the repaired unit may be paid by NOKIA,
in which case NOKIA shall have risk of loss or damage during
this shipment).
The proof of date of purchase will be required before in-
warranty service is rendered.
Maintenance and service may be obtained in any authorized
service centre in Canada.
EXTENSION OF WARRANTY PERIOD
When a repair is made, an extra 90-day service warranty is
given to the labour and parts of the repair concerned. If
replacement of a faulty unit is applied, instead of repairing,
this 90-day service warranty is applied to the replaced unit.
Besides this 90-day service warranty, the warranty repairs or
replacements do not affect the original warranty conditions,
which are determined by the date of purchase.
THE FOREGOING WARRANTY IS THE PURCHASER’S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OR MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE OR USE.
Some provinces do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply
to you.
70
FOR WARRANTY SERVICE LOCATION, CONTACT YOUR SERVICE
PROVIDER/RETAILER/DEALER OR DIRECTLY TO:
NOKIA PRODUCTS LIMITED
575 Westney Road South
Ajax, Ontario L1S 4N7
For products being returned to NOKIA or its authorized service
centres, the service provider/retailer/dealer shall prepay
shipping charges, taxes, duties, insurance. NOKIA shall have
no risk for loss or damage during this shipment.
NOTE: As warranty is automatically registered, no further
action is required by the consumer.
71
call waiting 29
answering a waiting call 29
cancelling 29
caller ID 17
showing/hiding number 32
calling card
18. Index
A
access codes 51
accessories 55
batteries 58
making calls 33
set-up 18
chargers 59
covers 55
calls
alarm clock 48
answering a call 16
automatic answer 34
antenna 14
answering 16
answering automatically 34
answering with call
waiting 29
external jack 7
automatic answer 34
automatic redial 18
ending 29
forwarding 30
initiating a second 28
making 15
B
batteries 58
attaching 3
charging 3
discharging 4
removing 4
calls
silencing an incoming call
switching between 28
three-way calling 28
care and maintenance 67
chargers 59
clear key 7
clearing call lists 40
clock 20
alarm clock 48
displaying/hiding 20
setting 20
time format 20
way calling
C
calls
call forwarding
activating 30
cancelling 30
call log 39
clearing lists 40
dialed calls 40
missed calls 39
Options key 39
received calls 40
restricting calls
call timers 40
covers, changing 55
D
dialed calls 40
72
E
M
making a call 15
memory 38
editing names/numbers 38
emergency key 9 26
memory (game) 49
menu 8
shortcuts 9
message alert tone 22
messages
voice mail 42
missed calls 39
muting the microphone
erasing names/numbers 38
external antenna jack 7
F
factory settings, restoring 35
G
game tones 22
games 49
My tones (menu) 21
H
N
help text 8
NAM selection 32
names
I
editing 38
Inbox 44
erasing 38
in-call menu 28
saving 36
network feature setting 27
new call 28
numbers
editing 38
erasing 38
saving 36
K
Keyguard 13
keypad lock 13
keypad tones 22
keys
clear key 7
power key 6
scroll keys 6
L
language 20
O
lights 7
in car kit 21
lock code 51
on/off 14
one-touch dialing 31
P
locking the keypad 13
locking your phone 53
logic (game) 50
phone book 36
available memory 38
scrolling view 38
73
phone lock 53
NAM selection
T
technical information 68
text messages 43
forwarding 46
power key 6
settings
Inbox 44
reading 43
replying 47
storage 44
writing 45
Q
quick alert settings 23
three-way calling 28
timers 40
tones 21
R
reading text messages 43
received calls 40
redial
keypad 22
message alert 22
quick alert settings 23
ringing option 21
ringing tone 22
ringing volume 22
warning and game 22
touch tones 34
saving touch tone strings 35
setting automatic length 35
setting manual length 35
automatic 18
last number 16
restore factory settings 35
restricting calls 51
ringing option 21
ringing tone 22
ringing volume 22
S
safety information 63
scroll keys 6
U
unmuting the microphone
scrolling view 38
security code 51
V
vibrating alert 22
voice mail messages 42
voice mailbox number 23
voice privacy 24
volume
earpiece 15
ringing 22
security features 51
send own number 32
signal strength 14
silencing an incoming call 17
snake (game) 49
special characters 12
dialing
start screen 7
system selection 33
W
warning and game tones 22
warranty 69
welcome note 24
74
|