DIGITAL TELEPHONE USER GUIDE
Table of Contents
General Information
Answering Calls
Pages 2 – 3
Making Calls
Microphone Control
Handsfree Calls
Placing a call on Hold
Pages 4 - 6
Transferring Calls
Conference
Conference Bridge
Call Park - System
Station Busy/No Answer Options
Pages 6 - 9
Outside Call Dialling Options
Pages 9 - 10
Call Pickup
Paging
Background Music
Call Forwarding
Pages 11 - 12
Call Forwarding Destination
Customised Message
Set Relocation
Station Outgoing Lockout
Account Code Entry
Account Code Forced/Verified
Pages 13 - 14
Pages 15 - 16
DISA Password
ACD/UCD
Volume Control
Programming
Feature Access Keys
One Touch Keys
Speed Dial Name Input
Pages 17 - 18
Pages 19 - 20
Quick Entry Guide
Quick Reference Guide
1
General Information
The following should be considered when reviewing this User Guide:
Instructions are provided for the NEC Xen IPK digital telephones (Dterm Series i).
All operational instructions assume Prime Line Pickup is assigned to
intercom dial tone, Ringing Line Preference is assigned to all telephones,
a Call Appearance and Call Arrival key has been assigned to all digital
telephones and only a single tenant has been assigned in the system.
All access codes listed are standard; some may vary based on system
assignment. Please consult your authorised NEC Dealer for the access codes
applicable to your system.
Access to many features is based on system assignments. Not all features
may be available from your telephone.
Digital telephones are equipped with displays to provide useful call processing
information such as digits dialled, recall indications, feature confirmation, etc.
Xen IPK digital telephones also show features accessible by the soft keys.
LED Indications
Function
Lamp Status
Line Keys:
Incoming Call
Rapid Flashing Red
Slow Flashing Green
Slow Flashing Red
Held Call - Your telephone
Held Call - Other telephone
Call in progress
Your telephone
Steady Green
Other telephone
Steady Red
Hold recall
Intermittent Flashing Green
Large LED: (360˚ Visual Ring Indicator)
Incoming calls
Rapid Flashing Green
(CO/PBX, DIT or ANA)
Incoming intercom,
TIE Line or DID Call
Message from Attendant
Voicemail Message
Rapid Flashing Red
Slow Flashing Green
Slow Flashing Red
Feature Key:
Intermittent Flashing Red
Intermittent Flashing Red
Slow Flashing Red
DND Set
Call Forward Set
Callback Request
Other:
Held Intercom Call
Microphone On
Handset Muted
Conf LED Flashing Red
Mic LED Steady Red
Mic LED Flashing Red
2
Answering Calls
Ringing Calls
Lift Handset
Converse
Note: When assigned the delayed ringing feature, incoming calls will first ring at a
primary station. If the call is unanswered after a preprogrammed time
interval, calls will also ring at the assigned secondary station.
Ringing Calls To A Call Arrival Key
Lift handset
Converse
Note 1: A Call Arrival key must be assigned to appear and ring at a Line
Key/Feature Access Key.
Note 2: A Call Appearance key must be available to answer an incoming
outside call.
Voice Announce Calls
Ensure microphone (MIC) LED is lit
Adjust Speaker volume or as needed
Respond handsfree
Note: The handset may be used at any time during the conversation
Camp-on (Call Waiting)
Receive camp-on tone while on another call
Replace handset to disconnect present call OR press Hold and press the
Hookswitch to converse with second party.
Call Alert Notification
With a call in progress
Receive Call Alert Notification
Press Hold, converse with second party
Note 1: The second call may be placed on hold if the line appearance is assigned or
if a Call Appearance key is available
Note 2: Press flashing Line Key, Call Appearance key or Conf key to return to the
first call.
3
Making Calls
Internal Calls
Lift handset
Dial station number or 9 for the attendant (or reception)
OR press Feature Access Key or One Touch Key programmed for
Direct Station Selection
Voice announce after tone burst or wait for ringing call to be answered.
Note 1: When calling a digital telephone, dialling 1 after the station number will
change ringing to voice or voice to ringing.
Note 2: To directly access a personal voice mailbox on the Xen Mail system, press
Message or dial 7 after dialling the station number.
Outside Calls
Lift handset
Dial trunk access code i.e 0
OR press idle Outside Line Key
Dial telephone number
Converse
Preset Dialling
Dial the desired number
Lift handset
Converse
Last CO/PBX Number Redial
Lift handset
Press Redial
Dial Last Number Redial code #
Converse
Speed Dial – Using The Redial key
Lift handset
Press Redial and dial Speed Dial Memory Location:
Station Speed Dial
System Speed Dial
80-99
00-79
OR press Feature Access key or One Touch Key programmed for
Station Speed Dial
Converse
4
Speed Dial – Using The Softkeys
Press the SYS. or STA. Softkey (
)
(System or Station Speed Dial respectively)
Press the UP or DOWN softkey ( ), repeatedly until the desired
name/number is displayed.
To search alphabetically (optional step):
Press the dial key showing the first letter of the name to be dialled
Continue to press this dial key until the desired letter is displayed
Press
to display the first match corresponding the chosen letter
*
Lift handset to dial the displayed name/number
Trunk Queuing
After dialling trunk access code or pressing a busy Line Key and receiving a line
busy indication:
Dial Trunk Queue set code 78
Replace handset
Note: When a line is available, your telephone will ring: lift handset and place call.
Microphone Control
Press MIC
or
Press Feature
Dial MIC On/Off code 1
Note 1: Lit MIC LED indicates MIC on
Note 2: MIC ON/OFF key may be assigned to a Feature Access Key or One Touch Key
Note 3: If talking on handset rather than handsfree, the handset microphone will be
muted and the MIC LED will flash.
Handsfree Calls
Press Speaker, LED lights
Ensure MIC LED is lit
Place internal or outside call
Converse
Press Speaker to disconnect call
Note: The handset may be used at any time during the conversation. To resume
handsfree operation or to monitor a call, press Speaker (LED lights) and
replace handset.
5
Group Listening
With a call in progress via the handset/headset:
Press Speaker, then the LED Lights
Converse. Conversation is heard over the speaker and the handset/headset.
Only the handset/headset may be used to respond.
Press Speaker to cancel the Group Listening mode
Note: When switching from Group Listening mode to the Handsfree Mode, it is
recommended that the Microphone be turned off.
Placing A Call On Hold
Non-Exclusive Hold
With a call in progress:
Press Hold
Exclusive Hold
With a call in progress:
Press Feature
Press Hold
Note 1: To retrieve a held call, press the flashing Line Key, Call Appearance Key or
Conf key (for internal calls).
Note 2: Call on Non-Exclusive Hold can be retrieved from any digital telephone with
the held line appearance or Call Appearance key.
Note 3: After a preprogrammed time, the held call will recall to the originating
station.Once in a recall condition, Exclusively Held calls can be retrieved from
any station with the held line appearance or Call Appearance key.
Transferring Calls
Using Manual Dial
Using Direct Station
Selection (DSS)
With a call in progress:
Press Transfer
With a call in progress:
Press Transfer
Dial station number
Announce call (optional)
Replace handset
Press programmed DSS
Announce call (optional)
Replace handset
Note 1: If the called station is busy, replace handset to initiate a camp-on.
Unanswered camp-ons and unscreened transfers will recall to the attendant
telephone. After answering the recall, pressing Feature 86 will transfer the
call to the personal voice mailbox of the station number dialled.
Note 2: To return to the original party, press flashing Line Key, Call Appearance
key or Conf key.
6
Note 3: A Feature Access Key or One Touch Key may be assigned for DSS.
Note 4: To transfer a call directly to a personal voice mailbox, press Message or dial 7
after dialling the station number.
Conference
With a call in progress:
Press Conf
Place second call (internal or external)
Announce conference
Press Conf to establish conference
Note 1: Repeat above procedure to add an additional party. (Max 2 outside parties).
Note 2: An unsupervised conference may be established by pressing the Conf key
again, after the conference has been established. The parties may continue to
converse in private. Press the flashing Conf key to return to the conversation.
Conference Bridge
To make a call using a conference Bridge:
Call a Conference Bridge extension.
When the voice prompt is heard, enter the password and press #.
Start the conference call.
Start a conference call from an incoming outside call using an Automated
Attendant:
Call an outside line that is answered by an Automated Attendant.
Dial the extension of the Conference Bridge.
When the voice prompt is heard, enter the password and press #.
Start the conference call.
Start a conference call from an off-premise location:
Call a line that is directed to the Conference Bridge.
When the voice prompt is heard, enter the password and press #.
Start the conference call.
Start a conference call from an incoming outside call using an Attendant:
Call the Attendant and ask to be transferred to a Conference
Bridge extension.
Wait until the transfer is complete.
When the voice prompt is heard, enter the password and press #.
Start the conference call.
Note: Default passwords:
Conference #1 = 0001
Conference #2 = 0002
7
Call Park - System
Set
Retrieve
With a call in progress:
From any station:
Press Transfer
Lift handset
Dial Call Park Set code 4
Dial Call Park Retrieval code 4#
Dial Call Park Location 0-9
Converse
*
Dial Call Park location 0-9
Replace handset
Note: If the dialled Call Park location is busy, dial another Call Park location (0-9).
Station Busy/No Answer Options
Automatic Callback
Set
Answer
When calling a busy digital
When both telephones are idle
telephone:
originating telephone rings:
Lift handset
Dial Automatic Callback code 0
Replace handset
Call is placed automatically
Callback Request
Set
Answer
When calling a busy or
Receive display and/or Feature
unanswered digital telephone:
Dial Callback Request code #
Replace Handset
LED message indication:
Lift handset
Dial #; request originator is
automatically called
Repeat above procedure to
respond to additional messages
Note: Callback messages are automatically cancelled once the originating station is
called. Callback Request access code # must be assigned in system programming.
Tone Override
Set
Answer
When calling a busy digital telephone:
With a call in progress:
Dial Tone Override code
Receive tone override signal †
Press Hold
*
to send tone
Wait for signalled party to answer
Converse with second party
†If handsfree, a visual indication only ( ) will be provided on the telephone’s display.
*
Note: An Override Tone will be sent each time
is pressed.
*
8
Station Busy/No Answer Options (Continued)
Step Call
When calling a busy telephone:
Dial 2 to advance to the next station number in that 10’s group
Voice Over
Originate
Whisper Page
When calling a busy telephone:
With a call in progress:
Dial Voice Over code 6
Receive Voice Over
announcement
Announce message
Press Feature
Answer
With a call in progress:
Dial 65
Converse with Voice Over
originator while monitoring
first call
Receive Voice Over
announcement
Press Hold
Press Feature
Converse with Voice Over
originator
Dial 65
Press Answer key to alternate
between parties
Converse with first caller while
monitoring Voice Over originator
Note: The Whisper Page Access
Code may be assigned to a
Feature Access Key or One
Touch Key.
Outside Call Dialling Options
Save & Repeat
Save
Repeat
Lift handset
With an originating outside
call in progress:
Press Redial
Press Feature
Dial #; stored number is dialled
Dial 9; called number is stored
Replace handset
9
Outside Call Dialling Options (Continued)
Store & Repeat
Store
Repeat
Lift handset
With an outside call in progress:
Press Feature
Press Redial
Dial 7
Dial ; stored number is dialled
*
Dial new phone number to
be stored
Press Feature
Complete conversation and
replace handset
Note: Store & Repeat and Save & Repeat features cannot be used simultaneously.
Automatic Redial
After originating a busy or unanswered outside call:
Press Speaker
Replace handset
Press Feature
Press Redial
Call is repeatedly dialled until answered, cancelled or the
maximum number of redial attempts is reached
Lift handset when the called party answers
Note 1: Press Speaker to cancel Automatic Redial.
Note 2: System programming determines waiting time and number of redial attempts.
Caller ID
Answer
Placing Caller ID Calls
Receive incoming ringing or
transferred outside call:
Press Directory (or SCROLL Key)
repeatedly until desired
number is displayed
Review telephone display for
calling party’s name or number
Lift handset to automatically
dial displayed number
Answer call accordingly
Converse
Note 1: Caller ID will be displayed even when station is busy or in DND mode,
allowing the user to identify the incoming call.
Note 2: The last 50 calls received with caller ID information are stored and are
accessible with the Directory (or SCROLL) key.
Note 3: Least Cost Routing (LCR/ACR) is required to automatically dial Caller ID calls.
Note 4: Press lit Line Key to review calling party’s name or number while the call is in
progress.
10
Call Pick Up
Call Pick Up System
Upon hearing ringing at
another telephone:
Lift handset
Call Pick Up Direct
Upon hearing ringing or voice
announcement at another
telephone:
Dial Call Pickup code:
- All Calls
Lift handset
68
6
Dial Call Pickup Direct code 67
Dial station number of the
telephone to be answered
Converse
- Outside Line
*
- Night Call Pickup
Converse
69
Paging
Lift handset
Dial paging code:
Internal
External
- All zones 51
- All int. & ext. 59
- Zone A
- Zone B
- Zone C
52
53
54
- All zones
- Zone A
- Zone B
- Zone C
55
56
57
58
Page
Wait for Meet-Me Answer or replace handset
Meet-Me Answer
Lift handset
Dial Meet-Me Answer code:
- Internal Page
- External Page
Converse
5
*
5#
Background Music
Set/Cancel
Press Feature
Dial BGM On/Off code 26
Note: A BGM key may be assigned in system programming to set/cancel the
Background Music feature.
11
Call Forward All Calls (CF/A)
Do Not Disturb (DND)
Set
Cancel
Press Feature
Press Feature
Dial Call Forward All/DND
set code 60
Dial Call Forward All/DND
cancel code 69
Select operation
Press Feature
- DND: Press Feature
- Call Forward All: Dial
destination station number or
voicemail and press Feature
Note 1: The Feature LED will flash intermittently when your telephone is in CFA/DND.
Note 2: While set, Call Forward All will override Call Forward Busy/No Answer setting.
Note 3: If Call Forward All and Do Not Disturb are both set, the feature set last is
activated.
Note 4: A CFA/DND key may be assigned in system programming to set/cancel this
feature. When setting Call Forward All, a destination station must be
entered. A lit LED indicates that Call Forward All/Do Not Disturb is set.
Call Forward Busy/No Answer (B/NA)
Set
Cancel
Press Speaker
Press Speaker
Dial Call Forward B/NA
set code 43
Dial Call Forward cancel code 44
Press Speaker
Dial destination station number
or voicemail
Press Speaker
Note 1: While set, Call Forward All will override Call Forward Busy/No Answer setting.
Note 2: A CF B/NA key may be assigned in system programming to set/cancel this
feature. When setting Call Forward Busy/No Answer, a destination station
must be entered. A lit LED indicates that CF B/NA is set.
12
Call Forward Destination
From Destination Station
Set
Cancel
Press Speaker
Press Speaker
Dial Call Forward All Destination
set code 47
Dial Call Forward All Destination
cancel code 48
Dial your station number
Dial destination station number
or voicemail
Dial your station number
Press Speaker
Press Speaker
Customised Message
From display telephone:
Press Feature
Dial Customised Message code 70
Dial
to scroll through messages
*
Dial # to select messages
Dial return date and time if required (Month/Day, Hour/Minute,
using 4-digit, 24 hour clock)
Press Feature
Note: When your telephone is set for Do Not Disturb, other display telephones will
receive your message upon calling your station.
Set Relocation
Ask the Attendant to turn on the Set Relocation Mode.
From the new location, press Speaker, then the LED lights.
Dial Set Relocation code________
Dial your station number.
Dial the Station Password (same as the Station Outgoing Lockout
[Password] code).
Hear the confirmation tone and then press Speaker.
Inform the Attendant to turn Set Relocation Mode off.
13
Station Outgoing Lockout
Changing Lockout Code
Press Speaker
Dial Lockout Change access code_____
Dial current Lockout code
Dial new Lockout code
Press Speaker
Note 1: By default, Lockout code is set at 0000000000 (10 zeros).
Note 2: When Lockout code is set for the first time, station is automatically restricted.
Note 3: Lockout code may be a maximum of 10 digits. If the new Lockout code is
less than 10 digits, press the Speaker to re-enter.
Note 4: When set, Station Outgoing Lockout restricts all outgoing calls.
Set/Cancel Station Outgoing Lockout
Press Speaker
Dial Station Lockout
- Set code
- Cancel code
_____
_____
Dial Lockout code
Press Speaker
Account Code Entry
With an outside call in progress:
Press Feature
With an outside call on hold:
Dial Account Code Entry
Code_____
Dial 66
Dial Account Code
(16 digits maximum)
Press Feature
Dial Account Code
(16 digits maximum)
Retrieve held call
Note 1: The outside party will not hear digits being dialled.
Note 2: The Account Code Entry Code may be assigned to a Feature Access Key or
One Touch Key.
Account Code Forced
To place an outside call:
Lift handset
Dial Forced Account Code access code_____
Dial Forced Account Code_____(up to 13 digits)
Dial trunk access code i.e. 0 and outside number
Note: When calling from a station that is assigned the Account Code Forced /
Verified feature, outgoing call will only be processed after the dialled Account
Code is verified.
14
DISA Password
Setting Your DISA Password
Lift handset
Dial DISA Password set access code
Dial your DISA ID code__________
Dial your current DISA password__________ default 0000000000 (10 zeros)
Dial your new DISA password__________
Replace handset
Note 1: Password may be a maximum of 10 digits. If the new password is less than
10 digits, replace the handset to enter.
Note 2: It is recommended that your DISA password be 10 digits and be changed
frequently to prevent unauthorised use.
ACD/UCD
Log On
Log Off
Press Speaker
Press Speaker
Dial access code____
Dial 1
Dial access code____
Dial 2
Press Speaker
Press Speaker
Note: A LOG key may be assigned in system programming to log/off from the
ACD/UCD group. A lit led indicates that the station is logged-on.
Break Mode
Set
Cancel
Press Speaker
Press Speaker
Dial 40
Dial 42
Press Speaker
Press Speaker
Note 1: Break Mode is only available while an agent is logged-on.
Note 2: A Break key may be assigned in system programming to set/cancel Break
Mode. A lit LED indicates that the station is in Break Mode.
Answering Call Using Headset
Press HEADSET key to answer
Converse
Press HEADSET key to hang up
15
Volume Control
Off-Hook Ringing Volume
Lift handset
Ringing Volume
Press Speaker
Dial 60
Dial 60
Dial Off-Hook Ringing
Volume code 1
Dial Ringing Volume code 1
Press or to set level
Press Speaker
Press or to set level
Replace handset
Note 1: Press
volume.
or
during audible telephone activity to adjust handset or speaker
Note 2: When the telephone is idle,
or
is used to adjust display contrast.
Programming
Resetting Feature LED
Press Feature
Dial 99
Press Feature
Note: Resetting the Feature LED will cancel Call Forward All Calls, Do Not Disturb
and Callback Request settings.
Station Speed Dial - Dial Access
Press Feature
Press Redial
Dial Speed Dial Memory location 80-99
Dial trunk access code i.e. 0 (if necessary)
Dial telephone number to be stored (24 digits maximum)
Press Hold (if entering name) and dial name of party
(13 letters maximum)
Press Feature
Note 1: Press Redial to insert a pause or Recall to store a hookflash.
Note 2: Refer to Speed Dial Name Input when entering name of party.
Note 3: Station Speed Dial is not available when 1000 System Speed Dial mode is
selected.
16
Feature Access Keys
Station Speed Dial
(Outside Numbers)
Press Feature
DSS/BLF (Stations)
And Feature Access
Press Feature
Press Redial
Press Redial
Press Feature Access Key
to be programmed
Dial 0
Press Feature Access Key to be
programmed
Dial 1 and station number
to be stored
Dial trunk access code
i.e 0 (if necessary)
Dial telephone number to be
stored (16 digits maximum)
Press Feature
OR dial feature access code
to be stored as indicated
in the Quick Entry Guide
Press Feature
Note 1: Press Redial to insert a pause and Recall to insert a hookflash.
Note 2: Busy Lamp Field status indication will be provided on keys programmed for DSS.
One Touch Keys
Station Speed Dial
(Outside Numbers)
Press Feature
DSS/BLF (Stations)
And Feature Access
Press Feature
Press Redial
Press Redial
Press One Touch Key to
be programmed
Press One Touch Key
to be programmed
Dial 1 and station number
to be stored
Dial 0
Dial trunk access code
i.e 0 (if necessary)
Dial telephone number to be
stored (16 digits maximum)
Press Feature
OR dial feature access code
to be stored as indicated
in the Quick Entry Guide
Press Feature
Note 1: Press Redial to insert a pause and Recall to insert a hookflash.
Note 2: Busy Lamp Field status indication will be provided on keys programmed for DSS.
17
Speed Dial Name Input
To add a name to each speed dial entry, press the dial pad number corresponding
to the alpha character desired.
i.e 2 = A,B,D,a,b,c, or 2
3 = D, E, F, d, e, f, or 3
4 = G, H, I, g, h, i, or 4
For the name Bob press: 2-2-6-6-2-2
Key Press
Key
1
1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th 12th 13th 14th
..
^
a
1
A
D
G
J
@
B
E
[
C
F
I
¥
a
d
g
j
]
b
e
h
k
n
p
u
w
$
.
^
c
_
2
3
4
5
6
r
‘
{
l
}
a
Back to 1
2
Back to A
Back to D
Back to G
Back to J
Back to M
3
f
4
H
K
N
Q
U
X
!
i
5
L
O
R
V
Y
“
,
l
6
M
P
m
S
t
o
q
v
x
%
/
7
s
7
Back to P
8
T
8
y
&
:
Back to T
9
W
0
Z
#
-
z
‘
9
Back to W
0
(
)
Back to 0
+
;
<
=
>
?
Back to
*
*
*
#
Set Space Back to Set
Conf Clear and back 1 character before cursor
18
Quick Entry Guide For Programming
Feature Access Keys and One Touch Keys
Feature
Press
Microphone On/Off
Call Forward All Set
# ➤➤1
# ➤ 60 ➤ Dial destination ➤ Answer
➤ Feature ➤ Feature
Do Not Disturb - Set
# ➤ 60 ➤ Answer ➤ Feature
➤ Feature
Call Forward All/DND - Cancel
# ➤ 69 ➤ Answer ➤ Feature
➤ Feature
Save & Repeat - Set
Store & Repeat - Set
Whisper Page
# ➤ 9
# ➤ 7
# ➤ 65
# ➤ 86
# ➤ 26
1 ➤ 6
Quick Transfer To Voicemail
Background Music
Voice Over Originate
Call Forward Busy/
No Answer - Set
1 ➤ 43 ➤ Dial Destination ➤ Answer
➤ Speaker ➤ Feature
Internal Paging All Zone
Internal Paging Meet-Me
External Paging All Zone
External Paging Meet-Me
Call Pick Up All Calls
1 ➤ 51
1 ➤ 5*
1 ➤ 55
1 ➤ 5#
1 ➤ 68
1 ➤ 67
Call Pick Up Direct
Note 1: When pressed, the Answer Key will not appear in the display. This is normal operation.
Note 2: Other features may be programmed in addition to those listed above. Refer to
the Xen IPK Digital Voicemail User Guide for features related to Voicemail.
19
Quick Reference Guide
Outside Calling
Outside Call
Dial 0 ➤ Dial Telephone Number
Redial ➤ Dial #
Last CO/PBX number redial
Speed Dial
Redial ➤ Dial 00-99
Save/Store & Repeat - Access
Trunk Queue
Redial ➤ Dial *
Receive Trunk Busy Indication ➤ Dial 78
Automatic Redial
Receive busy ➤ Speaker ➤ Replace Handset
➤ Feature ➤ Redial
Internal Calling
Station Call
Dial Station Number or DSS key
Reach Busy Station ➤ Dial 0
Automatic Callback
Callback Request
Tone Override
Reach Busy/No Answer Station ➤ Dial #
Reach Busy Station ➤ Dial *
Voice Over Originate
Quick Transfer To Voicemail
Reach Busy Station ➤ Dial 6
Dial station number or DSS key ➤ Press Message
or Dial 7
With A Call In Progress
Hold
Hold
Exclusive Hold
Transfer
Feature ➤ Hold
Transfer ➤ Dial Station Number or DSS key
Quick Transfer To Voicemail
Transfer ➤ Dial Station Number or DSS key
➤ Press Message or dial 7
Conference
Conf ➤ Place 2nd Call ➤ Conf
Call Park System
SET: Transfer ➤ Dial 4* ➤ Dial 0 - 9
RETRIEVE: Dial 4 # ➤ Dial 0 - 9
Save & Repeat - Save
Store & Repeat - Store
Feature ➤ Dial 9
Feature Dial 7 ➤ Dial number to Store
➤ Feature
Whisper Page
Receive Voice Over ➤ Feature ➤ Dial 65
From The Intercom
Internal Paging
Dial 51-54 ➤ Page
Dial 55-59 ➤ Page
Dial 68
External Paging
Call Pickup All Calls
Call Pickup Direct
Dial 67 ➤ Dial Station Number
From An Idle Telephone
Microphone Control
Call Forward All/DND
Feature ➤ Dial 1 OR Press MIC
SET: Feature ➤ Dial 60 ➤ Dial Destination
Station (CF/A Only) ➤ Feature
CANCEL: Feature ➤ Dial 69 ➤ Feature
Call Forward Busy/No Answer
SET: Speaker ➤ Dial 43 ➤ Dial Destination
Station ➤ Speaker
CANCEL: Speaker ➤ Dial 44 ➤ Speaker
Feature LED Reset
Feature ➤ Dial 99 ➤ Feature
20
Notes
The material contained herein is subject to change without prior notice at the sole
discretion of NEC Business Solutions Ltd.
Stock# 8502589
Version 1
DPA. June 2003
Copyright ©2003 NEC Business Solutions Ltd
Document No. NEC-8055
|