Motorola DEBUT I856 User Manual

User Guide  
Motorola® DebutTM i856  
www.nextel.com  
© 2009 Sprint. Sprint and the NEXTEL name and logo are trademarks  
of Sprint. Other marks are the property of their respective owners.  
6/18/09  
Class B Digital Device  
DECLARATION OF CONFORMITY  
Per FCC CFR 47 Part 2 Section 2.1077(a)  
As a personal computer peripheral, this device complies with part 15 of  
the FCC Rules. Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and (2) this device must  
accept any interference received, including interference that may cause  
undesired operation. See 47 CFR Sec. 15.19(3).  
This equipment has been tested and found to comply with  
Note  
the limits for a Class B digital device, pursuant to part 15 of  
the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation.  
Responsible Party Name: Motorola, Inc.  
Address: 8000 West Sunrise Boulevard  
Plantation, FL 33322 USA  
Phone Number: 1 (800) 453-0920  
Hereby declares that the product:  
Product Name: Motorola Debut i856  
Model Number: H74XAN6JR7AN  
FCC-ID: IHDT56KC1  
Conforms to the following regulations:  
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)  
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
FCC Notice to Users  
The following statement applies to all products that have received FCC  
approval. Applicable products bear the FCC logo, and/or an FCC ID in  
the format FCC-ID: IHDT56KC1 on the product label.  
Motorola has not approved any changes or modifications to this device by  
the user. Any changes or modifications could void the user’s authority to  
operate the equipment. See 47 CFR Sec. 15.21.  
Table of Contents  
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Assigning Speed Dial Numbers . . . . . . . . . . . . 103  
Because of updates in phone software, this  
printed guide may not be the most current  
version for your phone. Visit www.nextel.com  
and sign in to access the most recent version  
of the user guide.  
User  
Guide  
Note  
Introduction  
This User Guide introduces you to your wireless service  
and all the features of your new phone.  
Please refer to the Important Safety  
Information section on page 156 to learn  
about information that will help you safely use  
your phone. Failure to read and follow the  
Important Safety Information in this phone  
guide may result in serious bodily injury,  
death, or property damage.  
WARNING  
Throughout this guide, you’ll find tips that highlight  
special shortcuts and timely reminders to help you  
make the most of your new phone and service. The  
Table of Contents and Index will also help you quickly  
locate specific information.  
You’ll get the most out of your phone if you read each  
section. However, if you’d like to get right to a specific  
feature, simply locate that section in the Table of  
Contents and go directly to that page. Follow the  
instructions in that section, and you’ll be ready to use  
your phone in no time.  
i
 
Use and Care  
To care for your Motorola phone, keep it away from:  
liquids of any kind  
dust and dirt  
Don’t expose your phone to water, rain,  
extreme humidity, sweat, or other  
moisture.  
Don’t expose your phone to dust, dirt,  
sand, food, or other inappropriate  
materials.  
extreme heat or cold  
cleaning solutions  
Avoid temperatures below -10°C/14°F or  
above 45°C/113°F.  
To clean your phone, use only a dry soft  
cloth. Don’t use alcohol or other  
cleaning solutions.  
microwaves  
the ground  
Don’t try to dry your phone in a  
microwave oven.  
Don’t drop your phone.  
ii  
 
3. Press and hold the End/Power Key (.) for two  
seconds to turn the phone on.  
If your phone is activated, it will turn on, search for  
service, and enter standby mode.  
1. Setting Up Service  
If your phone is not yet activated, see “Activating  
You may see a prompt to update your browser  
information. Press the left softkey (the top left key  
below the display screen) to select Ok and complete  
the task.  
Note  
4. Make your first call.  
Use your keypad to enter a phone number.  
Press the Talk key (,).  
Setting Up Your Phone  
Softkeys ( K)  
(;) Navigation Key  
Rewind Key ())  
(*) Forward Key  
Menu Key (/)  
([) Music Key  
1. Make sure your SIM card is in place.  
Talk Key (,)  
(.) End/Power Key  
2. Install the battery.  
(r/ y) OK/ Play Key  
1
   
encounter security messages, call Nextel Customer  
Service at 1-800-639-6111 from any other phone.  
Your phone’s battery should have enough charge for  
your phone to turn on and find a signal, set up your  
voicemail, and make a call. You should fully charge  
your battery as soon as possible. See “Charging the  
Battery” on page 11 for details.  
Note  
Setting Up Voicemail  
All unanswered calls to your phone are automatically  
transferred to your voicemail, even if your phone is in  
use or turned off. Therefore, it is recommended that you  
set up your voicemail and personal greeting as soon  
as your phone is activated.  
Activating Your Phone  
If you purchased your phone at a Nextel Store, it is  
probably activated and ready to use.  
1. Using your Motorola DebutTM i856 phone, call your  
If your phone is not activated, please call Nextel  
Customer Service at 1-800-639-6111 from any other  
phone.  
wireless phone number.  
2. Follow the system prompts to:  
Create your passcode.  
You must be in an area covered by the Nextel  
National Network when you first power up your  
phone.  
Tip  
Record your name announcement.  
Record your greeting.  
When you power up your phone the first time, it  
performs a series of security checks. For example, it  
verifies the phone is Nextel-approved and the correct  
SIM card is installed. If you don’t pass the security  
checks, your phone displays messages and screen  
prompts showing what to do next. If you still  
Voicemail Passcode: It is strongly recommended that  
you create a passcode when setting up your  
Note  
voicemail to protect against unauthorized access.  
Without a passcode, anyone who has access to your  
phone is able to access your voicemail messages.  
2
       
For more information about using your voicemail, (see  
information, you need to create passwords to protect  
your privacy.  
Account Username and Password  
Enabling Security  
If you are the account owner, you will create an account  
username and password when you sign on to  
www.nextel.com. (Click Need to register for access? to get  
started.) If you are not the account owner (if someone  
else receives the bill for your service), you can get a  
sub-account password at www.nextel.com.  
You must enable security the first time you power on  
your phone or within ten days of first activating your  
phone.  
1. Press and hold . for two seconds to power on  
your phone.  
When you go to www.nextel.com, you will be  
redirected to www.sprint.com by default. Follow the  
sign in instructions above to access your Nextel  
account.  
Note  
2. Press Ok (right softkey).  
3. You are prompted to enable security. Press Yes  
(right softkey). A series of screens followed by the  
default homepage displays.  
Voicemail Password  
4. Press . to return to standby mode.  
You will create your voicemail password (or passcode)  
when you set up your voicemail. See “Setting Up  
Voicemail” on page 2 for more information on your  
voicemail password.  
Account Passwords  
With Nextel service, you enjoy unlimited access to your  
personal account information and voicemail account.  
To ensure that no one else has access to your  
3
     
From Your Motorola Debut i856 Phone  
Press *4, to check minute usage and account  
Getting Help  
balance.  
Managing Your Account  
Press *3,to make a payment.  
Online: www.nextel.com  
Access your account information.  
From Any Other Phone  
Nextel Customer Service: 1-800-639-6111.  
Business Customer Service: 1-877-639-8351.  
Check your minutes used (depending on your  
service plan).  
View and pay your bill.  
Operator Services  
Enroll for online billing and automatic payment.  
Purchase accessories.  
Operator Services provides assistance when you place  
collect calls or when you place calls billed to a local  
telephone calling card or third party.  
Shop for the latest phones.  
Press  
0,.  
View available service plans and options.  
For more information or to see the latest in products  
and services, visit us online at www.nextel.com.  
4
   
Your Phone  
2. Phone Basics  
Slide Open View  
12. Right Softkey  
11. OK/Play Key  
1. Left Softkey  
2. Menu Key  
10. Next/ Forward Key  
9. Music Key  
8. End/ Powe  
r Key  
3. Previous /  
Rewind Key  
7. Navigation Key  
6. Keypad  
4. Talk Key  
5. Back Key  
5
   
3. Previous/Rewind Key [)] lets you play the previous  
song or rewind a song while using the phone’s  
built-in music player.  
Slide Closed View  
13. Speaker  
Button  
4. Talk Key (,) allows you to place or receive calls,  
answer Call Waiting, or use Three-Way Calling.  
14. Volume  
Button  
15. Direct  
Connect  
(DC) Button  
5. Back Key (*) deletes characters in text entry  
mode. When using the Web, it allows you to return  
to the previous page.  
6. Keypad lets you enter numbers directly in standby  
mode and when adding numbers to contacts. It also  
allows you to enter text for messaging, Web browsing,  
Contacts, and Calender events.  
16. Micro USB  
Connector  
17. Audio Jack  
7. Navigation Key scrolls through the phone’s menu  
options and acts as a shortcut key from standby  
mode.  
Key Functions  
1. Left Softkey (-) lets you select softkey actions or  
menu items corresponding to the bottom left line  
on the display screen.  
8. End/Power Key (.) allows you to end calls, return to  
standby mode, or turn the phone on or off.  
9. Music Key ([)allows you to activate the phone’s  
built-in music player.  
2. Menu Key (/) lets you access the phone’s menu  
from standby mode and allows you to access  
context-sensitive menus from other screens.  
10. Next/Forward Key [*] lets you play the next song or  
fast forward a song while using the phone’s built-in  
music player.  
6
 
11. OK/Play Key (r) selects the highlighted choice  
when navigating through a menu and lets you play  
or pause a song while using the phone’s built-in  
music player.  
The use of wireless phones while driving may cause  
distraction. Discontinue a call if you can’t concentrate  
on driving. Additionally, the use of wireless devices  
and their accessories may be prohibited or restricted  
in certain areas. Always obey the laws and  
Note  
12. Right Softkey (-) lets you select softkey actions  
corresponding to the bottom right line on the  
display screen.  
regulations on the use of these products.  
13. Speaker Button ()) lets you place or receive calls in  
speaker mode. In standby mode, pressing the  
speaker button turns Direct Connect speaker  
mode on and off.  
Getting Started With Your Phone  
To start using your Motorola Debut i856 phone:  
Make sure your SIM card is in place.  
Charge the battery.  
14. Volume Button allows you to adjust the ringer  
volume in standby mode, the voice or speaker  
volume during a call, and the speaker volume  
while using the music player or other applications.  
Turn on your phone.  
After you’ve completed these items, you are ready to  
begin using your new phone.  
15. Direct Connect (DC) Button allows you to use Nextel  
Direct Connect®. (See page 27.)  
Your SIM Card  
16. Micro USB Connector allows you to connect your  
charger or other accessories to your phone.  
Locating the SIM Card  
17. Audio Jack allows you to connect your headphones  
Your SIM (Subscriber Identity Module) card is a small  
card inserted into the SIM card holder within your  
phone below the battery.  
to your phone.  
7
   
If no SIM card came with your phone, contact Nextel  
Customer Service at 1-800-639-6111.  
Removing and Inserting the SIM Card  
To avoid losing information stored in your SIM  
card, do not remove it from your phone  
unless absolutely necessary.  
Important  
Most users will never need to remove or insert the SIM  
card. However, if it becomes necessary, follow the  
To remove your SIM card:  
1. With your phone powered off, use your fingernail to  
press down on the battery door latch and slide it  
towards the top of the phone to remove it.  
The SIM card is designed for optimal  
Contacts storage and feature use. For Nextel  
SIM card compatibility information, visit  
Important  
2. Remove the battery, and then use your thumbs to  
carefully slide the SIM card out from under the  
edge.  
In some cases, Contacts and Groups may not  
be accessible if you move your SIM card to  
another phone. Contacts and Groups created  
with your Motorola Debut i856 phone may not  
be readable by an older iDEN SIM-based  
phone.  
8
   
Battery and Charger  
Protect your SIM card as you would any delicate  
object. Store it carefully.  
Note  
Use only Nextel-approved or Motorola-  
WARNING  
approved batteries and chargers with your  
phone. The failure to use a Nextel-approved or  
Motorola-approved battery and charger may  
increase the risk that your phone will overheat,  
catch fire, or explode, resulting in serious  
bodily injury, death, or property damage.  
To insert your SIM card:  
1. With your phone powered off, use your fingernail to  
press down on the battery door latch and slide it  
towards the top of the phone to remove it.  
2. Remove the battery, and then use your thumbs to  
carefully slide the SIM card into your phone until it  
lies flat in the SIM card holder.  
For information on battery safety, see “Battery  
Important  
Do not touch the gold-colored areas of your  
SIM card.  
Important  
Nextel-approved and Motorola-approved batteries and  
accessories can be found at Sprint Stores or through  
Motorola. You may order online at www.nextel.com or by  
calling 1-866-866-7509.  
Your phone’s Lithium Ion (Li-Ion) battery allows you to  
recharge it before it is fully drained.  
When the battery reaches 5% of its capacity, your  
phone makes a sound and displays a message. When  
there are approximately two minutes of talk time left, the  
phone sounds an audible alert and then turns off.  
9
 
2. Gently slide the battery cover forward to remove it  
Long backlight settings, searching for service, vibrate  
mode, browser use, and other variables may reduce  
the battery’s talk and standby times.  
Note  
Tip  
from the phone.  
You may proceed to install a lanyard (sold separately)  
with the battery cover removed.  
Tip  
Watch your phone’s battery level indicator and  
charge the battery before it runs out of power.  
3. Insert the battery into the opening, making sure the  
connectors align. Gently press down to secure the  
battery.  
Installing the Battery  
1. With your phone powered off, use your fingernail to  
press on the battery door latch towards the front of  
the phone.  
4. Replace the battery cover and gently press and  
slide it down until it clicks into place.  
10  
 
Removing the Battery  
1. Make sure the power is off so that you don’t lose  
any stored numbers or messages.  
2. Remove the battery cover and position your  
fingernail on the top end of the battery to remove it.  
Do not handle a damaged or leaking Li-Ion  
battery as you can be burned.  
WARNING  
Charging the Battery  
With the approved Li-Ion battery, you can recharge the  
battery before it becomes completely run down.  
Charge your battery as soon as possible so you can  
begin using your phone.  
Always use a Nextel-approved or Motorola-approved  
desktop charger, travel charger, or vehicle power  
adapter to charge your battery.  
Turning Your Phone On and Off  
Turning Your Phone On  
Press and hold .for approximately two seconds.  
Using the Phone Charger  
As your phone connects to the network, you see a  
connecting message. Your phone may require you to  
enter identifying information to use it or to access  
specific features.  
Plug the flat end of the charger into the phone’s  
micro USB connector and the other end into an  
electrical outlet.  
11  
       
Turning Your Phone Off  
Phone In Use — Your phone is active on a  
phone call.  
$
0
t
4
Press and hold . for two seconds until you see  
the powering down animation on the display  
screen.  
Direct Connect In Use — Your phone is active  
on a Direct Connect call.  
Your screen remains blank while your phone is off  
(unless the battery is charging).  
Group In Use — Your phone is active on a  
Group Connect call.  
Viewing Status Information  
Direct Talk — Your phone is off network and  
set to Direct Talk mode.  
Your phone’s display screen provides information  
about your phone’s status and options. This list  
identifies the symbols you’ll see on your phone’s  
display screen:  
Talkgroup In Use — Your phone is active on a  
Talkgroup call.  
r
c
Bluetooth In Use — Your phone is using  
Bluetooth. If this icon is blinking, your phone  
is in discoverable mode. If this icon is static,  
a Bluetooth connection is active.  
Battery Strength — A fuller battery indicates a  
greater charge. The “plug” icon (bottom  
rows) indicates the phone is charging.  
d e  
f g  
y x  
w h  
Active Phone Line — 1 indicates phone line 1  
is ready to make calls; 2 indicates phone  
line 2 is ready to make calls.  
%'  
Signal Strength — More bars next to the  
antenna indicate a stronger signal.  
z {  
|}  
Call Forward — Your phone is set to forward  
&);  
(*<  
No Service — Your phone is without service.  
You cannot make or receive any type of call.  
~
12  
   
/5  
,
Ringer Off — Your phone is set to not ring.  
TTY — You are ready to use your phone to  
make calls using a TTY (text telephone)  
AB  
W
Speaker Off — Direct Connect sound is set to  
come through the earpiece rather than  
through the speaker.  
"
Hearing Aid — Your phone is set for use with a  
hearing aid and is active on a phone call.  
Messages — You have one or more  
2 6  
1 3  
5
:
Voice Record — You have one or more voice  
Text Input — You are using one of the phone’s  
text entry methods. See “Selecting a Text  
QRS  
TUV  
WX  
Navigating Through Menus and  
Options  
Internet — You are ready to browse the  
Internet or are browsing the Internet using a  
7 >  
?
Press /to access the main menu, and then use  
the navigation key to scroll through menu items.  
To navigate through a list-type menu, simply press your  
navigation key up or down. The scroll bar at the right of  
the menu keeps track of your position in the menu at  
all times.  
Transmitters — Your phone is set not to  
receive calls and other transmissions. See  
L
13  
   
Many features provide context-sensitive menus that let  
you access related features and actions. This icon f  
appears any time a context-sensitive menu is available.  
Press /to access the menu.  
Backing Up Within a Menu  
To go to the previous menu:  
Press Back (right softkey).  
To return to standby mode:  
Press ..  
Selecting Menu Items  
As you navigate through the menu, menu options are  
highlighted. Select an item by highlighting it and  
pressing r.  
Shortcuts and Personalized Keys  
In standby mode, your phone gives you ways to quickly  
access features you use frequently:  
For example, to view your text messages:  
1. Press /to access the main menu.  
Use the Shortcuts feature (page 83) to quickly access  
most menu options by pressing a number on your  
keypad or saying the voice name of the shortcut.  
2. Select Messages by highlighting Messages and  
pressing r.  
Use the Personalize feature (page 85) to assign main  
menu items to the navigation keys, softkeys and r,  
reorder the main menu, and set a main menu item to  
appear when you turn on your phone.  
3. Select Inbox by highlighting it and pressing r.  
(If you have any MMS messages, they are  
displayed.)  
For the purposes of this guide, the above steps  
condense into “Press /> Messages > Inbox.”  
Note  
14  
 
To choose a text input mode:  
Help  
1. At a screen requiring you to enter text, press /to  
Your phone contains an in-device help program to  
help you understand complicated or seldom used  
features. When you access a feature, Help sometimes  
appears as a menu item or softkey. Select Help and  
read the text for a quick overview of the feature. For  
more information, refer to this guide.  
change the text input mode.  
2. Select one of the following options:  
Alpha to enter text directly using the keypad.  
Word to enter text using a predictive text system  
that reduces the number of key presses required  
while entering a word. (See page 16.)  
Displaying Your Numbers  
Symbols to enter punctuation and other symbols.  
My Info lets you view your phone number, Direct  
Connect number, and other phone information.  
Numeric to enter numbers by pressing the  
numbers on the keypad. (See page 17.)  
Press /> Tools > My Info.  
Text Input Settings allows you to change the settings  
Entering Text  
Insert to insert Quick Notes preset messages  
(Insert QNotes) or additional multimedia elements  
such as pictures or audio files into a message.  
(See page 54.) (You can also access Quick Notes  
by pressing QNotes [left softkey] when beginning  
a message.)  
Selecting a Text Input Mode  
Your phone provides convenient ways to enter letters,  
numbers, and symbols whenever you are prompted to  
enter text (for example, when adding a Contacts entry  
or when composing text and multimedia messages).  
When entering text, press and hold the # to  
change letter capitalization (ABC > Abc > abc).  
Tip  
15  
                   
4. If the word that appears is not the desired word,  
press the navigation key up or down to change the  
word on the display to the next most likely word in  
the database. Repeat until the desired word  
appears.  
Entering Text Using Word Text Input  
Word Text Input (T9) reduces the number of keystrokes  
needed to enter a word by predicting complete words  
as you type. While you enter letters, Word mode  
matches your keystrokes to words in its database and  
displays the most commonly used matching word. You  
can add your own words to this database.  
Adding a Word to the Database  
If a specific word is not displayed as an option when  
you are using Word, add it to the database.  
To use Word text input, you must turn the Complete  
Word setting on. From a text entry screen, press />  
Text Input Settings > Complete Word and select On.  
Press Back (right softkey) to return to the text entry  
screen.  
Note  
1. Select the Alpha text input mode. (See “Selecting a  
2. Enter the word. (See “Entering Text Using Alpha  
1. Select the Word text input mode.  
3. Select the Word text input mode.  
2. Press the corresponding keys once per letter to  
enter a word. (For example, to enter the word “Bill,”  
press 2455.) (If you make a mistake, press  
Delete [left softkey] to erase a single character.  
Press and hold Delete [left softkey] to erase an  
entire entry.)  
The word will appear as an option the next time you  
scroll through options during Word Text Input.  
You cannot store alphanumeric combinations such  
as Y2K.  
Tip  
3. To accept a word and insert a space, press I.  
16  
     
To change the text input settings:  
1. On a text entry screen, press /.  
2. Select Text Input Settings.  
Characters scroll in the following order:  
English Sequence  
Space . ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥  
A B C 2 Á Ã Â À Ç  
D E F 3 É Ê È  
G H I 4 Í Ì  
J K L 5  
Key  
ABC  
DEF  
3. Select your Primary Input and Secondary Input  
language, and whether you want Complete Word  
and Word Predict features to be on or off.  
GHI  
JKL  
Entering Text Using Alpha Mode  
MNO  
PQRS  
TUV  
WXYZ  
M N ñ O 6 Ó Õ Ô Ò  
P Q R S 7 ß  
T U V 8 Ú Ü Û Ù  
1. Select the Alpha mode. (See “Selecting a Text Input  
WXY Z 9  
2. Press the corresponding keys once per letter to  
enter a word. (For example, to enter the word “Bill,”  
press 2twice, 4three times, 5three times,  
and 5three times again. (If you make a mistake,  
press Delete (left softkey) to erase a single  
character. Press and hold Delete (left softkey) to  
erase an entire entry.)  
+ - 0 * / \ [ ] = > < # §  
Space Shift Caps Lock  
Back  
Entering Symbols, Numbers, and Quick  
Notes  
By default, the first letter of an entry is capitalized and  
the following letters are lower cased. After a character  
is entered, the cursor automatically advances to the  
next space after two seconds or when you enter a  
character on a different key.  
To enter symbols:  
Input Mode” on page 15.) To enter a symbol, press  
the appropriate key indicated on the display.  
17  
           
To enter numbers:  
Select the Numeric mode and press the appropriate  
Capitalization  
When you press and hold the #key, it acts as a  
three-way toggle. Press and hold #to make the next  
letter typed uppercase (shift), to make all subsequent  
letters typed uppercase (caps lock), or to go back to  
lowercase letters.  
To enter Quick Notes:  
1. From a text entry screen, press QNotes (left softkey).  
2. Select a message and press r.  
These icons appear:  
or  
or  
Shift is on.  
R
S
U
V
To add a quick note after you have already started  
entering a message, press /> Insert >  
Insert QNotes, and select a message.  
Tip  
Caps lock is on.  
When none of these icons appear, letters typed are  
lowercase. Scrolling up or down after typing a letter in  
Alpha mode changes the case of the letter (uppercase  
or lowercase).  
Quick Notes preset messages make composing text  
messages easier by allowing you to enter quick  
messages, such as “Meet me at,” “Let’s get lunch,” or  
a customized message of your own.  
Note  
When creating a text message, you may not be able  
to make a letter uppercase by scrolling up,  
depending on the type of text message and the text  
entry mode.  
Note  
Special Function Keys  
Some of the phone’s keys assume different functions  
while in Alpha or Word mode.  
Your phone automatically makes the first letter of a  
sentence uppercase.  
Spaces  
Press # for a space.  
18  
 
Punctuation  
Using a Remote Direct Connect Button  
Press 1or 0 to insert punctuation. Continue to  
press the key to view the list of symbols available  
through that key. Pause to select a symbol.  
If you are using a headset or other optional accessory  
with a remote Direct Connect button, you can use the  
remote Direct Connect button for phone calls, Direct  
Connect calls, and Group Connect calls.  
Additional punctuation symbols are available in  
Symbols mode.  
Note  
For phone calls, use the remote Direct Connect button  
to answer calls, switch between calls, and end calls.  
Hold the remote Direct Connect button for less than  
two seconds to answer calls and switch between calls.  
Hold the remote Direct Connect button for more than  
two seconds to end calls.  
Accessories  
Your phone comes with the following accessories:  
A Li-Ion battery and charger.  
A128K SIM card.  
For Direct Connect calls and Group Connect calls, use  
the remote Direct Connect button as you would the  
Direct Connect button on your phone.  
Various accessories are available for use with your  
Motorola Debut i856 phone, including cases, vehicle  
power chargers, data cables, hands-free accessories,  
and more.  
When using a headset, the Direct Connect button on  
your phone works the same way as when you are not  
using a headset. Direct Connect and Group Connect  
sounds will be heard through the headset.  
To order additional accessories, go to www.nextel.com  
or call1-866-866-7509. You can also contact your  
Nextel Authorized Representative or stop by any Sprint  
Store. For information on Sprint Store locations, go to  
19  
           
Digital Wireless Phone Calls offer clear calls and other  
services, such as missed call notification, Three-Way  
Calling, speakerphone, and speed dialing (page 21).  
3. Making and Answering  
Calls  
Direct Connect Calls allow two-way radio  
communication with another Direct Connect user  
within the Nextel National Network (page 27).  
Group Connect Calls allow coast-to-coast two-way  
radio calling to up to 20 Nextel Direct Connect  
customers simultaneously (page 29).  
Nextel Direct Send allows you to send contact information  
in Direct Connect and Group Connect calls and send  
pictures in Direct Connect calls (page 34).  
Talkgroup Calls allow two-way radio calling to up to  
100 Nextel Talkgroup customers simultaneously  
To learn more about the differences between Nextel  
Group Connect calls and Talkgroup calls, please see  
Note  
Types of Calls  
With the Nextel National Network, Nextel Direct  
Connect, and your Motorola Debut i856 phone, you  
have the following traditional wireless phone and  
Nextel Direct Connect services available to you:  
Nextel Direct Talk allows for two-way radio  
communication “off the network” between two or  
more phones equipped with this capability  
20  
   
Answering Calls  
Phone Calls  
1. Make sure your phone is on.  
Making Calls  
When your phone is off, calls go directly to voicemail.  
Note  
Placing a traditional wireless phone call from your  
Motorola Debut i856 is as easy as making a call from  
any landline phone.  
2. Press , to answer an incoming call.  
Depending on your settings, you may also answer  
incoming calls by sliding the phone open or pressing  
any number key. “Call Answer Mode” on page 85 more  
information.  
1. Make sure your phone is on.  
2. Enter a phone number from standby mode and  
press ,. (If you make a mistake while dialing,  
press Delete [right softkey] to erase the numbers.)  
When the slide is closed, you can answer a call either  
by pressing the Speaker button on the upper left  
side of the phone ()) or pressing Yes (left softkey).  
Tip  
3. Press . when you are finished.  
To redial your last outgoing call, press and hold ,.  
Tip  
To set the phone to answer and end calls by sliding it  
open and close, press /> Settings > Phone Calls  
> Slide Activation and set Slide to Ans and Slide to  
End to On.  
You can also place calls from your phone by using  
Voice Names (page 26), speed dialing numbers from  
your Contacts (page 27), and using your Recent Call  
Your phone notifies you of incoming calls by any  
combination of ringing or vibrating, the indicator light  
flashing, the backlight illuminating, or the screen  
displaying an incoming call message.  
21  
       
If the incoming call is from a number stored in your  
Contacts, the entry’s name is displayed. The caller’s  
phone number may also be displayed, if available.  
Emergency Calls  
Your phone supports emergency calling. Emergency  
phone calls can be made even when your SIM card is  
blocked or not in your phone.  
Ending a Call  
To end a call, press ..  
Dial 911and press , to be connected to an  
emergency response center. If you are on an active  
call, you must end it before calling 911.  
Missed Phone Calls  
Missed phone calls are forwarded to voicemail. When  
you do not answer an incoming call, you will see a  
Missed Call notification.  
When you make an emergency call, your phone’s GPS  
Enabled feature can help emergency service  
personnel find you, if you are in a location where your  
phone's GPS antenna has established a clear view of  
the open sky and your local emergency response  
center has the equipment to process location  
information. See “GPS Enabled” on page 115, and  
page 116, for more information on the limitations of this  
feature. Because of the limitations of this feature, always  
provide your best knowledge of your location to the  
emergency response center when you make an  
emergency call.  
To display a Missed Call entry from the notification screen:  
Press View (left softkey). (To dial the phone number,  
press , after displaying the entry.)  
To display a Missed Call entry from standby mode:  
1. Press , or /> Recent Calls.  
2. Highlight an entry and press r.  
22  
 
In-Call Options  
Always report your location to the 911 operator  
when placing an emergency call. Some  
designated emergency call takers, known as  
Public Safety Answering Points (PSAPs) may not  
be equipped to receive GPS location information  
from your phone.  
Important  
Press /during a call to display a list of available  
in-call features. To select an option, highlight it and  
press r. The following options may be available:  
Hold to place the call on hold.  
Emergency calls cannot be placed while the  
keypad is locked.  
3 Way to initiate a three-way call.  
Use Bluetooth to switch from the phone’s microphone  
to a Bluetooth device.  
If you have not registered on the network,  
emergency calls cannot be placed while your  
SIM card is in your phone.  
2nd Call to place a second call.  
Contacts to display your Contacts list.  
Recent Calls to display Recent Calls list.  
My Info to display your phone’s Information.  
Memo to display the phone’s electronic notepad.  
Datebook to enter a datebook event.  
Messages to create a message.  
If you are bringing your phone number to Nextel  
from your previous carrier, you may receive a  
temporary telephone number while your Nextel  
phone is being programmed with your  
permanent phone number. If you make a call to  
911 and the call fails, the 911 emergency  
response center will not be able to call you back  
on your Nextel phone if in the meantime, your  
Nextel phone has been programmed with your  
permanent telephone number. If the call is  
disconnected before location and details have  
been provided, call 911 again and advise that you  
were disconnected.  
Store to store a new contact.  
Record to record the phone call.  
GPS to enter the GPS application.  
In Call Setup to modify the in-call features.  
23  
 
To view Call Details and Call Info:  
1. Select a recent call.  
Speakerphone  
Press )or Speaker (right softkey) during a call to  
route the phone’s audio through the speaker or the  
earpiece.  
2. Press rto view the Call Details.  
3. Press ragain to view the Call Info.  
Because of higher volume levels, do not  
place the phone near your ear during  
speakerphone use.  
WARNING  
Saving a Phone Number  
1. Enter a phone number and press /.  
Mute  
2. Highlight Store Number and press r.  
Press Mute (left softkey) during a call to mute the  
microphone. Press Unmute (left softkey) to unmute  
the microphone.  
3. To store a new entry, highlight [New Contact] and  
press rto add a new entry.  
– or –  
End-of-Call Options  
Search for an existing contact name and press r  
to save the new number.  
After you receive or make a call, the call duration is  
briefly displayed. You are then automatically taken to  
the Recent Calls list.  
4. Enter or edit information as necessary and press  
Save (left softkey) to save the Contact.  
For more information about Contacts, see  
To save a number that is not in your contacts:  
Highlight an entry and press Save (left softkey).  
24  
         
Finding a Number  
You can have multiple pauses in a phone number  
and combine waits and pauses.  
Note  
To find Contacts entries, you can either scroll through  
the list using your navigation key or you can search  
Contacts entries by name.  
To dial or save phone numbers with pauses:  
1. Enter the phone number.  
1. Press /> Contacts.  
2. Press and hold *until the letter P appears. The P  
represents a three-second pause. For a longer  
pause, press the letter P more than once. Each P  
represents a three-second pause.  
2. Press Search (left softkey).  
3. Enter the first few letters of a Contact's name and  
press r. (The first contact entry that matches the  
entered text will be highlighted.)  
– or –  
Press and hold *until the letter W appears. The  
W means your phone waits before dialing further. A  
message appears asking about sending the rest of  
the digits.  
4. To display the Contacts entry, press r. To dial the  
entry's default phone number, press ,.  
Phone Numbers With Pauses  
3. Enter additional numbers.  
You can dial or save phone numbers with pauses for  
use with automated systems, such as voicemail,  
conference call, or credit card billing numbers.  
4. Press , to dial the number.  
– or –  
There are two types of pauses available on your phone:  
Press /> Store Number to save the number in  
Wait sends the next set of numbers when prompted.  
your Contacts.  
Pause automatically sends the next set of numbers  
after three seconds.  
25  
     
1. Press and hold  
s
until a prompt appears telling  
When dialing a number with a wait, press Yes (left  
softkey) to send the next set of numbers.  
Note  
you to say the voice name.  
2. Say a voice name. Your phone plays the name  
back to you.  
Making a Call From Contacts  
1. Press /> Contacts.  
3. The call is placed automatically.  
2. Highlight an entry and press , to dial the default  
phone number.  
To stop a phone call from being completed,  
press ..  
Tip  
– or –  
Making a Phone Call While in a Direct  
To dial another number from the entry, highlight  
the name, press the navigation key right or left until Connect Call  
the correct number type appears, and then  
press ,.  
Pressing ,while in an active Direct Connect lets you  
initiate a phone call to the other person if their phone  
number is stored in Contacts.  
Making a Call From Recent Calls  
1. While in a Direct Connect conversation press ,.  
1. Press , or /> Recent Calls.  
(You will see a Start Call To: prompt.)  
2. Highlight an entry and press ,.  
2. Press Yes (left softkey) or press r to switch from  
the Direct Connect call to a phone call.  
Making a Phone Call Using a Voice Name  
If you have created a voice name in Contacts (see  
page 100), say the voice name into your phone to  
enter the number.  
26  
         
Speed Dialing  
Nextel Direct Connect  
Each phone number stored in Contacts is assigned a  
Speed Dial number, which you can use to call that  
number. You can store up to 600 numbers in your  
phone’s speed dial memory.  
Nextel offers the following Nextel Direct Connect®  
services:  
Direct Connect® allows instant two-way radio  
communication with another Direct Connect user  
anywhere on the Nextel National Network (U.S.).  
1. Enter a speed dial number and then press #.  
2. Press , to dial the number.  
To use Turbo Dial® for speed dial locations 1–9:  
International Direct Connect allows Direct Connect  
calling to and from select countries.  
Group Connect® allows nationwide Direct Connect  
calling to up to 20 other Direct Connect users at  
TalkgroupSM allows Direct Connect calling to up to 100  
Nextel subscribers in the same Direct Connect  
Nextel Direct TalkSM lets you establish off-network,  
two-way radio communication between two or more  
Nextel Direct Talk-capable phones. (See “Direct Talk”  
Press and hold the appropriate key for  
approximately two seconds. The display confirms  
that the number has been dialed when it shows  
“Calling...”.  
Redialing the Last Number  
Press and hold ,.  
See www.nextel.com for more details on these Direct  
Connect services. Pricing for each of these services is  
based on your service contract.  
27  
         
Making Direct Connect Calls  
The number of digits in each part of a Direct  
Connect number may vary. For example, your Direct  
Connect number may be formatted as  
999*999*9999, while another valid number may  
appear as 555*555555*55.  
Note  
1. Enter a Direct Connect number. (See “Dialing  
2. Press and hold the Direct Connect (DC) button on  
the left side of your phone. Begin talking after your  
phone emits a chirping sound.  
If you are calling or saving a Direct Connect number  
for a Sprint phone with Direct Connect capabilities,  
the Direct Connect number may be the same as the  
wireless phone number. When dialing or saving the  
Direct Connect number, insert asterisks in place of  
hyphens (913*555*1234).  
3. Release the DC button to listen.  
A Direct Connect call ends automatically after there is  
no activity on the call for several seconds.  
Dialing Direct Connect Numbers  
When you store a Direct Connect number in  
Contacts, be sure to include the entire number,  
including the asterisks.  
Tip  
Every Direct Connect number has three parts:  
An area ID.  
Using Just the Member ID  
A network ID.  
A member ID.  
If you are contacting someone sharing your network  
and area IDs, you only need to enter the member ID  
(the last part of the number).  
An asterisk separates each part (for example:  
999*999*9999). When you enter a number containing  
all three parts, you must separate them with asterisks.  
1. Enter a member ID.  
2. Press and hold the DC button.  
28  
         
Making Direct Connect Calls From Contacts or  
Recent Calls  
Answering Direct Connect Calls  
When you receive a Direct Connect call, your phone  
emits a tone or vibrates. You then hear the voice of  
your caller.  
If you have numbers stored in Contacts (page 98) or  
Recent Calls (page 93), you can use these numbers to  
make calls.  
1. Wait for the caller to finish speaking.  
1. Press /> Contacts or Recent Calls.  
2. Press and hold the DC button. Continue as you  
would on any Direct Connect call.  
2. Highlight an entry and then press and hold the DC  
button to call the entry’s Direct Connect number.  
3. Press . to end the call.  
You can make Direct Connect calls while viewing  
entry details on either list. Display the entry details or  
My Info from another phone (in Recent Calls) and  
press and hold the DC button.  
Tip  
A Direct Connect call ends automatically after there is  
no activity on the call for several seconds.  
Group Connect  
Making Direct Connect Calls Using a Voice Name  
A Group Connect call is similar to a Direct Connect call  
to one user, but is made to multiple Direct Connect  
subscribers at once. You can create Groups from your  
phone and call up to 20 other Group Connect-  
compatible phones* anywhere on the Nextel National  
Network. You can create a Group for one-time use or  
store it to Contacts so you can call it at any time.  
If you have created a voice name in Contacts, say the  
voice name into your phone to enter the number.  
1. Press and hold the Speaker button (s) until a  
prompt appears telling you to say the name.  
2. Say the name. Your phone plays the name back to  
you.  
3. Press and hold the DC button.  
29  
       
Creating Groups in Contacts  
In order to store Groups to your Motorola Debut i856  
phone, you must use the 128K SIM card that came  
with your phone. The 128K SIM card is labeled  
“Nextel 1200 Contcs & 25 Grps”. With this SIM card, a  
maximum of 25 groups can be added to your  
MotorolaDebut i856 phone. Group entries created  
with your MotorolaDebut i856 phone may not be  
readable by older iDEN SIM-based phones.  
Note  
1. Press /> Contacts.  
2. Select [New Group].  
3. To assign a name to the Group, enter the name.  
If you do not assign a name, the Group is named  
“Group” followed by the number of members in the  
Group. For example, “Group (8)” is a group with eight  
members.  
Note  
Making Group Connect Calls  
1. From Contacts or the Recent Calls list, highlight or  
select a Group.  
2. Press the DC button.  
5. To create a voice name for the Group (optional),  
select [Options] > Voice Name. Follow the prompt to  
record a Group name. When you have finished,  
press Back (right softkey).  
You can also start a Group Connect call by entering  
or selecting a Direct Connect number. See “Starting  
Tip  
6. Press Save (left softkey).  
Answering Group Connect Calls  
Adding Group Members  
Proceed as if answering a Direct Connect call from  
one user. Only one person at a time may speak on  
a Group Connect call.  
You can add Group members that have a Direct  
Connect number and Group Connect-compatible  
phone to your Group by selecting them from Contacts,  
the Recent Calls list, Memo, or by manually entering  
30  
         
the Direct Connect number from your keypad. You can  
also add all members in an existing Group to another  
Group by selecting the Group name from Contacts.  
Starting a Group Connect Call With a  
Direct Connect Number  
1. Press /> Push To Talk > Walkie Talkie, select entries  
for a Group Connect call, and go to step four. (To  
add members or numbers from Recent Calls or  
Memo, scroll left or right.)  
To add Group members from Contacts, the Recent Calls  
list, or Memo:  
1. While creating a Group, select [Add Member].  
To move between Contacts, the Recent Calls list, and  
Memo, scroll left or right.  
– or –  
Note  
From standby mode, enter a Direct Connect  
number.  
2. Highlight desired entries and press r. A  
checkmark appears next to each selected  
member.  
– or –  
From Contacts or Recent Calls, highlight an entry  
containing a Direct Connect number.  
To deselect a member, highlight it and press r.  
Note  
2. Press /> New Group or Call New Group.  
3. Press Done (left softkey) and then press Save (left  
3. Add more Group members. See “Adding Group  
softkey) to save the group.  
To add Group members manually from the keypad:  
1. While creating a Group, select [Add Number].  
2. Enter the Direct Connect number.  
4. To save the Group, press /> Store Group.  
– or –  
To call without saving, press Done (left softkey).  
3. Press rand then press Save (left softkey).  
5. To make the call, press the DC button.  
31  
 
2. Add more information to the entry (optional).  
3. Press Save (left softkey).  
Removing Members or Groups  
To remove a member from a Group:  
To store a group to Contacts from an active call:  
1. From Contacts, highlight a Group and press Edit  
(left softkey).  
1. During an active Group Connect call, press />  
Store Group.  
2. Highlight a member and press />  
Remove Member.  
2. Add more information to the entry (optional).  
3. Press Save (left softkey).  
You cannot record a voice name during an active  
call.  
Note  
You can also select Remove All Members however,  
you will have to add at least two new members to  
save the edited Group.  
Note  
3. Press Save (left softkey).  
Storing Members of Groups  
To delete a Group from Contacts:  
1. From Contacts, highlight a Group.  
2. Press /> Delete Group.  
To store a member from the Recent Calls list or within  
Contacts:  
1. Display a Group and press /> Store Number.  
2. Select a number or member to store.  
3. Add more information to the entry (optional).  
4. Press Save (left softkey).  
3. Press Yes (left softkey).  
Storing Groups  
To store a group to Contacts from the Recent Calls list:  
1. From the Recent Calls list, select a Group and  
press Save (left softkey).  
32  
   
To store a member from an active call:  
Group Connect Call Details  
1. During an active Group Connect call, press />  
Store Number.  
During a Group Connect call, you can view details  
about the other group members, such as their name or  
Direct Connect number, and their status on the call.  
2. Select a number or member to store.  
To view Group Connect call details:  
3. Add more information to the entry (optional).  
Press Details (left softkey).  
You cannot record a voice name during an active  
call.  
Note  
In the Details view, these icons appear next to member  
names or Direct Connect numbers:  
4. Press Save (left softkey).  
The member of the Group who is  
speaking.  
Group Connect Call Information  
F
E
While you are in a Group Connect call, the following  
appears on the screen:  
A member of the Group who is active on  
the Group Connect call, but not speaking.  
The name of the Group.  
A member of the Group who has exited  
the call.  
The name or the Direct Connect number of the  
person speaking.  
D
H
A member of the Group who could not be  
reached on the Group Connect call.  
The number of members who are participating in the  
Group Connect call.  
A member of the Group whose status is  
unknown.  
G
33  
   
To send a picture during a call:  
Nextel Direct Send  
1. While in a Direct Connect call, press Picture (right  
softkey). A list of pictures that can be included in a  
Direct Connect call appears.  
Nextel Direct Send lets you use Direct Connect calls to  
exchange pictures, My Info, contact information, and  
Groups with other phones that have this capability.  
2. Select a picture and press the DC button to send it.  
Nextel Direct Send cannot be used during Talkgroup  
calls. Pictures cannot be sent in Group Connect calls.  
3. Wait while the picture is transmitted. The Direct  
Connect call is temporarily interrupted while a  
picture is transmitted.  
Sending a Picture  
4. When prompted, press the DC button to resume  
the Direct Connect call.  
When you send a picture using Nextel Direct Send, the  
picture appears on the display of the receiving phone,  
and is saved by that phone.  
The first time you send a stored picture after turning  
the phone on, the message Picture Fees May Apply  
appears and you are prompted to respond. Press  
Yes (left softkey) to send the picture. Press No (right  
softkey) to cancel.  
Note  
Sending a Picture During a Call  
You can send a picture at any time during a Direct  
Connect call, whether you made or received the call.  
(Additional charges may apply.)  
Starting a Call by Sending a Picture  
You cannot talk or listen on a Direct Connect call while  
a picture is being transmitted. Other activities, such as  
searching for a picture, do not prevent you from talking  
or listening.  
You can start a call by choosing a stored picture from  
the Media Center.  
To do this, you must have the recipient’s Direct Connect  
number and IP address stored in your Contacts.  
34  
       
Pictures you receive are saved to your phone’s memory  
and are accessible through the Media Center.  
When a person sends you My Info from his or her  
phone, including his or her Direct Connect number  
and IP address, you can then easily store this  
information to Contacts from the Recent Calls list.  
Tip  
When you receive a picture, it appears every time you  
are in a Direct Connect call with the person who sent it  
unless you delete the picture from the Media Center.  
This occurs for the last 20 people who sent you  
pictures.  
To start a call by sending a picture:  
1. Press /> Multimedia > Media Center and then  
highlight or select a picture.  
To accept a picture:  
2. Press /> Send Via... > Direct Send.  
1. When you see the message asking you to accept  
the picture, press Yes (left softkey). (To decline the  
picture press No [right softkey].)  
3. Select A Contact or A Recent Call. These names have  
Direct Connect numbers and IP addresses stored.  
4. Select a name and press the DC button to send  
2. Wait while the picture is transmitted. The Direct  
Connect call is temporarily interrupted while a  
picture is transmitted.  
the picture.  
5. When prompted, press the DC button to resume  
the Direct Connect call.  
3. When prompted, press the DC button to resume  
the Direct Connect call.  
Receiving a Picture  
The first time you accept a stored picture after  
turning the phone on, the message Picture Fees  
May Apply appears and you are prompted to  
respond. Press Yes (left softkey) to accept the  
picture. Press No (right softkey) to cancel.  
Note  
When someone sends you a picture using Nextel  
Direct Send, your phone emits a tone or vibrates and a  
message appears on the display asking you to accept  
the picture.  
35  
 
Sending My Info  
To stop the transmission before it is finished, press  
Cancel (right softkey).  
Tip  
You can control what portion of the information in My  
Info is sent and whether it is sent automatically in every  
Direct Connect call or only when you choose to send it.  
Setting Picture Capability  
To turn your phone’s ability to send and receive pictures in  
Direct Connect calls on or off:  
When you send My Info, certain information, such as  
your email address or fax number, cannot be  
included. To send complete contact information,  
create an entry for yourself in Contacts and send it.  
Tip  
1. Press /> Push To Talk > PTT Options > On/Off Settings.  
2. Select Pictures and press rto check or uncheck  
The information your phone sends always includes My  
Name and Direct Connect.  
the box.  
3. Press Done (left softkey) to save the setting.  
It may include Line 1, Line 2, Carrier IP, Direct Connect, and  
Group ID depending on the options provided by your  
service provider and how you set your sending options.  
This setting does not affect your phone’s ability to send  
and receive My Info or contact information.  
Sending My Info and Contact Information  
The default setting is Line 1 only.  
To change which fields are sent:  
When you send My Info or contact information using  
Nextel Direct Send, the information you send appears  
on the display of the receiving phone. After the call, the  
information appears on that phone’s Recent Calls list.  
1. Press /> Tools > My Info.  
2. Press /> Direct Send Setup > Info To Send.  
3. A checkmark appears next to the fields that will be  
sent. To add or remove the checkmark, select the  
field.  
36  
     
4. When you are finished, press Done (left softkey).  
To control whether your information is sent automatically:  
1. Press /> Tools > My Info.  
3. Enter a Direct Connect number or press Browse  
(left softkey) and select a number from Contacts,  
Recent Calls, or Memo.  
4. When Ready to Send appears, press the DC button  
to send the information.  
2. Press /> Direct Send Setup > Auto Send.  
3. Select On to send your information automatically,  
or Off to send your information only when you  
choose to send it.  
Sending Contact Information  
You can send contact information by selecting a  
Contacts entry.  
When you receive your phone, it is set to send your  
information automatically.  
Note  
Contacts entries that contain only addresses cannot be  
sent. When Contacts entries are received, they do not  
include ring tones or pictures.  
To send My Info during a call:  
1. While in a Direct Connect call, press />  
To send contact information during a call:  
Direct Send My Info.  
1. While in a Direct Connect call, press /> Contacts.  
2. When Ready To Send appears, press the DC button  
to send the information.  
2. Highlight a Contacts entry and press />  
Send Via... > Direct Send.  
To start a call by sending My Info:  
1. Press /> Tools > My Info.  
2. Press /> Direct Send My Info.  
If the Contacts entry you scrolled to is a Group, you  
may be prompted to allow yourself to be a part of the  
group being sent. Press Yes (left softkey) to become  
part of the group.  
Note  
37  
 
3. When Ready to Send appears, press the DC button  
to send the contact information.  
To view the information while still in the Direct Connect call:  
Press /> View Contact.  
To start a call by sending contact information:  
1. From Contacts, highlight or select an entry.  
2. Press /> Send Via... > Direct Send.  
You can also view My Info from other phones on the  
Recent Calls list. See “7. Recent Calls” on page 93.  
Sending Groups Using Direct Send  
If the Contacts entry you scrolled to is a Group, you  
may be prompted to allow yourself to be a part of the  
group being sent. Press Yes (left softkey) to become  
part of the group.  
Note  
You can send a Group using Nextel Direct Send so that  
the person who receives the Group can use the list.  
To send a Group from the Recent Calls list:  
3. Enter a Direct Connect number or press Browse  
(left softkey) and select a number from Contacts,  
Recent Calls or Memo.  
1. From Recent Calls, highlight a Group and press  
/> Send Group.  
2. To include yourself in the Group, press Yes (left  
softkey). To exclude yourself, press No (right  
softkey).  
4. When Ready To Send appears, press the DC button  
to send the contact information.  
If you choose to include yourself and the Group  
already contains 20 members, you will be prompted  
that the list is full. You will be excluded from the list.  
Note  
Receiving My Info or Contact Information  
When you receive My Info or contact information from  
another phone, an icon appears on the display.  
3. Enter a Direct Connect number or press Browse  
(left softkey) and select a number from Contacts,  
Recent Calls, or Memo.  
My Info  
3
Contact Information  
2
38  
             
4. When Ready To Send appears, press the DC button  
Talkgroups  
to send the contact information.  
To send a Group from Contacts:  
A Talkgroup is a predetermined group of Direct  
Connect users, created by an account administrator.  
Talkgroups can contain up to 100 members.  
1. From Contacts, highlight a Group and press />  
Send Via....  
2. To include yourself in the Group, press Yes (left  
softkey). To exclude yourself, press No (right  
softkey).  
Difference Between Group Connect and  
Talkgroup Calls  
In a Group Connect call, you or another caller  
determines who can participate in the call. By contrast,  
participation in a Talkgroup is determined by an  
administrator. Here are the ways Group Connect and  
Talkgroup calls differ.  
3. Select Direct Send.  
4. Enter a Direct Connect number or press Browse  
(left softkey) and select a number from Contacts,  
Recent Calls or Memo.  
5. When Ready To Send appears, press the DC button  
Group  
Talkgroup  
to send the Group.  
Group Icons  
Geography  
t
The Group will appear in the Recent Calls list on the  
phone to which you sent the Group.  
r
Nationwide  
Limited to local  
market and network  
(fleet)  
Maximum  
Group Size  
21 (including 100  
originator)  
39  
         
Adding More Talkgroups  
Group  
Talkgroup  
You can be included in additional Talkgroups by doing  
one of the following:  
Setup  
Dynamically,  
Predefined, via  
via your phone Nextel administrator  
using Talkgroup  
Using Talkgroup Management at www.nextel.com. You  
must be an account administrator to use Talkgroup  
Management.  
Management  
Voice Activated  
Dialing  
Yes  
No  
Contacting your Nextel Sales Representative at the  
time of activation.  
Joining a Talkgroup  
Making Talkgroup Calls  
To participate in a Talkgroup, the account administrator  
must first add you to the membership and then you  
must “join” the Talkgroup.  
1. Press  
and then enter the Talkgroup number.  
#
– or –  
1. Press Contacts (right softkey) and highlight a  
Talkgroup.  
Select the Talkgroup from Contacts or the Recent  
Calls list.  
2. Press Join (left softkey).  
2. Press the DC button and continue as if making a  
You can now receive communications from other  
members of this Talkgroup.  
Direct Connect call.  
Receiving Talkgroup Calls  
You will hear all active Talkgroup conversations on your  
phone. To silence them, press /> Push To Talk >  
PTT Options > Tkgrp Silent and then select On.  
Answer it as you would a regular Direct Connect  
call. Only one person at a time may speak on a  
Talkgroup call.  
40  
 
During and immediately after a Talkgroup call ends,  
press Options (right softkey) to display any available  
options.  
Responding to a Call Alert  
You can set a distinctive ringer for Call Alerts. See  
Note  
Call Alerts  
To answer a Call Alert:  
Press the DC button to make a Direct Connect call  
to the sender.  
Call Alerts let you notify others that you want to  
communicate with them using Direct Connect. When a  
user receives a Call Alert, the phone sounds a tone  
and displays your name or Direct Connect number.  
To clear a Call Alert:  
Press Clear (right softkey).  
To store a Call Alert in the Call Alert queue:  
Sending Call Alerts  
1. Enter a Direct Connect number and press Alert  
Press Queue (left softkey).  
(left softkey).  
The Recent Calls list also stores Call Alerts you have  
received. They appear as Direct Connect calls. Call  
Alerts remain in your Recent Calls list until you delete  
them or until they reach the end of the list.  
Note  
2. When “Ready to Alert” appears, press the DC  
button to send the Call Alert.  
You can send a Call Alert from Recent Calls or  
Contacts. Select a Direct Connect number and  
continue as explained above.  
Note  
Using the Call Alert Queue  
When you queue a Call Alert, it remains in the Call Alert  
queue until you make a Direct Connect call to the  
sender or delete it.  
41  
       
2. Highlight a Call Alert and press Alert (left softkey).  
Viewing Call Alerts  
Ready to Alert appears on the display.  
1. Press /> Push To Talk > Call Alert.  
2. Scroll through the list.  
3. Press the DC button until Alert Successful appears  
on the display.  
Viewing Call Alert Date and Time  
1. Press /> Push To Talk > Call Alert.  
2. Select a Call Alert and press r.  
Deleting Call Alerts  
To delete a Call Alert from the queue:  
1. From the Call Alert queue, highlight a Call Alert  
and press /> Delete.  
Responding to Call Alerts in the Queue  
2. Press ror press Yes (left softkey) to confirm.  
To delete all Call Alerts from the queue:  
After you queue a Call Alert, you can respond to it by  
making a Direct Connect call to the sender or sending  
a Call Alert to the sender.  
1. From the Call Alert queue, press /> Delete All.  
2. Press ror press Yes (left softkey) to confirm.  
To make a Direct Connect call to the sender:  
1. Press /> Push To Talk > Call Alert.  
Direct Talk  
2. Highlight a Call Alert and press the DC button to  
begin the call.  
Nextel Direct Talk allows for two-way radio  
This removes the Call Alert from the queue.  
To send a Call Alert to the sender:  
communication “off the network” between two or more  
phones equipped with this capability. This feature is  
useful in areas without network coverage.  
1. Press /> Push To Talk > Call Alert.  
42  
           
You can make:  
Setting Your Phone to Direct Talk  
Code calls – two-way radio calls conducted off the  
network and using open channels and codes. In  
these calls, anyone using your same channel and  
code can hear your conversation.  
Before you and another caller can use Direct Talk, both  
of your phones must be set to Direct Talk mode.  
1. Press /> Push To Talk > Direct Talk.  
Private calls – two-way radio calls conducted off the  
network and using the wireless phone numbers of  
the participants. In these calls, others using the same  
channel cannot listen in.  
2. Select Go To Direct Talk.  
After a few seconds, your channel and code appear on  
the display screen. Your phone displays the last  
channel and code used for Direct Talk.  
When using Direct Talk mode, the two phones should  
be a minimum of six feet apart to maximize  
performance and improve transmission range. You can  
only make Direct Talk calls to users located within your  
range. This varies according to terrain, man-made  
structures, and atmospheric conditions.  
To return to network mode from Direct Talk:  
1. Press /> Push To Talk > DT Options.  
2. Select Exit Direct Talk.  
After a few seconds, your phone returns to network  
service.  
Most traditional phone features are not available in  
Direct Talk mode, including on-network phone calls;  
Direct Connect, Group Connect, Talkgroup calls, and  
Call Alerts; data services; messaging; call timers; and  
call forwarding.  
Code Direct Talk Calls  
To make Direct Talk Code calls, both parties must be  
on the same channel and code and have their phones  
set to Direct Talk. Anyone within range who is set to the  
same code and channel can hear all conversations.  
43  
   
To set a channel and code:  
Private Direct Talk Calls  
1. In Direct Talk mode, press Edit (left softkey) >  
Channel, and then select a channel.  
Private Direct Talk allows you to silence all the calls on  
a channel that are not directed specifically at you. To  
do this, you must first set your phone to Private Only.  
2. Select Code and select a code.  
To set your phone to Private Only:  
3. Press Back (right softkey) to return to the Direct Talk  
standby screen.  
1. In Direct Talk mode, press Edit (left softkey) >  
Code > Pvt Only.  
Making and Receiving Code Calls in Direct Talk  
Mode  
2. Press Back (right softkey) to return to the Direct Talk  
standby screen.  
In Direct Talk mode, press and hold the DC button.  
Your phone displays Transmitting, along with the  
channel and code selected.  
To reach you, other Direct Talk callers must be on your  
same channel and dial your ten-digit wireless phone  
number to reach you.  
The tone emitted from your phone when making a  
Direct Talk call sounds different from the tone heard on  
Direct Connect calls conducted on the network.  
You do not need to set your phone to Private Only to  
receive Private calls. If you are on the same channel as  
your caller, you can receive Private Direct Talk calls.  
Note  
If you receive an error message, this means:  
There may be no parties on your channel or code.  
You are out of range.  
When you receive a Code call using Direct Talk, your  
phone displays Receiving, along with the channel and  
code selected. Reply as on a Direct Connect call.  
44  
 
Making a Private Direct Talk Call  
Receiving All Calls on a Channel  
You can make Private Direct Talk calls to any person on  
your same channel. You do not need to set your phone  
to Private Only.  
You can set your phone to receive all Direct Talk  
transmissions that are within range and set to the same  
channel. Do this by selecting Receive All, instead of a  
code.  
To make a private Direct Talk Call:  
You cannot initiate a call when the code is set to  
Receive All. If you press the DC button to initiate a  
Direct Connect call and your code is set to Receive All,  
you receive an error message.  
1. In Direct Talk mode, enter a ten-digit wireless  
phone number. (You can also select a number  
from Contacts or Recent Calls.)  
2. Make the call in the same way you make a regular  
Direct Connect call.  
To set the code to Receive All:  
1. In Direct Talk mode, press Edit (left softkey) >  
If you receive an error message, it means:  
Code > Receive All.  
You may not be using a valid wireless phone  
number.  
2. Press Back (right softkey) to return to the Direct Talk  
standby screen.  
The person that you are trying to reach may not be in  
Direct Talk mode.  
The person that you are trying to reach is set to a  
different channel, or is out of range.  
45  
 
Making Emergency Calls While in Direct  
Talk Mode  
If you attempt to make an emergency 911 call while in  
Direct Talk mode, your phone automatically exits Direct  
Talk mode and attempts to find a network signal.  
If you are out of network coverage, your phone cannot  
make an emergency 911 call until you return to a  
network coverage area. You must wait until the phone  
reconnects to a network before attempting to make an  
emergency 911 call.  
46  
Message Center  
4. Service Features:  
The Basics  
The message center manages your messages. You  
can listen to or view voicemail messages, Multimedia  
Messaging Service (MMS) messages (which include  
most phone-to-phone text messages), Net alerts, and  
SMS text messages in the message center.  
The message center also lets you create and send  
MMS messages, including phone-to-phone text  
messages. It stores messages you have sent and lets  
you save drafts of messages you are creating.  
Accessing the Message Center  
Press /> Messages.  
Message Center Options  
After accessing the message center, select an option:  
[Create Message] — begin creating an MMS message.  
Voice Mail — access received voicemail messages.  
Inbox — access received MMS and SMS messages.  
Drafts — access MMS messages you have created  
and saved but not sent.  
47  
       
Outbox — store MMS messages that were not sent.  
Sent Items —access MMS messages you have sent.  
Net Alert — access alerts that you receive from Nextel.  
If you dismiss the notification, the message is not  
deleted. You can access it through the message center.  
If you are not on a phone call when you receive a  
message, your phone sounds a notification tone every  
30 seconds until you access the message, you dismiss  
the notification, or the alert time-out expires.  
Receiving Messages  
When you are on a phone call, you can receive  
message notifications for all types of messages except  
MMS messages. For other types of messages, your  
phone may sound a notification tone during the call or  
after you end the call, depending on how you set your  
notification options.  
When you receive a voicemail message, Multimedia  
Messaging Service (MMS) message, text message  
(SMS), or Net alert, you have two ways to access the  
message:  
Respond to the message notification that appears  
when the message is received.  
For information on notification options, see “Setting  
Dismiss the message notification and access the  
message later through the message center.  
Retrieving Your Messages  
Message Notifications  
1. Press /> Messages.  
When you receive a message, your phone notifies you  
with text on the display and a notification tone or  
vibration. You can access the message or dismiss the  
notification.  
2. Highlight a message type and press r.  
To dismiss the message notification, press Later  
(right softkey).  
48  
     
If you are setting up your voicemail from a phone other  
than your Motorola Debut i856, dial your ten-digit  
Nextel PTN. When you hear the greeting, press *to  
access your voicemail box. The system will prompt you  
to enter your password. Enter the last seven digits of  
your Nextel PTN. For example: 5557777. This is your  
temporary password. Follow the system instructions to  
complete your mailbox setup.  
Voicemail  
To receive voicemail messages, you must first set up  
your voicemail box.  
Tip  
If you are bringing your phone number from another  
carrier, we suggest you set up your voicemail box  
after the number you brought to Nextel is active on  
your Nextel phone and your temporary phone  
number is deactivated. If you set up your voicemail  
box prior to this, all messages and all settings  
(including your greeting and password) will be lost  
when the number you have brought to Nextel  
becomes active.  
You are in the main voicemail menu when you hear the  
voicemail system options.  
For details on using your voicemail, follow the audio  
prompts provided by the voicemail system.  
Playing Messages  
Setting Up Your Voicemail Box  
When you receive a new voicemail message, you  
can either listen to it immediately by pressing Call  
(left softkey), or later by pressing Back (right  
softkey).  
Using your Motorola Debut i856 phone, dial your ten-  
digit Nextel Personal Telephone Number (PTN). For  
example: 7035557777. Follow the system instructions  
to create a new four- to seven-digit password, record  
your name, and record a greeting. When the system  
says, “Thank you for using Nextel Voicemail,” your  
mailbox is set up.  
To listen to your voicemail messages after  
dismissing the onscreen prompt, press />  
Messages > Voice Mail. You will be connected to your  
voicemail box.  
49  
         
To open a message on the current page:  
Highlight a message and press r.  
Multimedia Messages (MMS)  
Multimedia Messaging Service (MMS) lets you send  
and receive messages that may include text, pictures,  
and audio recordings.  
Creating and Sending Messages  
Each message you create may contain the following  
fields:  
Your MMS address is [email protected].  
Your PTN is your ten-digit Nextel Personal Telephone  
Number.  
To — the phone numbers or email addresses of one  
or more recipients.  
Message — the body of the message. This may  
include text, pictures, ring tones, or voice records.  
Most common phone-to-phone text messages are  
sent and received as MMS messages on your  
Motorola Debut i856 phone. Text messages sent  
from other phones or mobile devices to your phone  
number arrive as MMS messages.  
Note  
Subject — the subject line.  
Attach — one or more attachments. These may be  
pictures, ring tones, or audio files, including voice  
records that you create while creating the message.  
Accessing MMS Messages  
Cc — the phone numbers or email addresses of  
additional recipients.  
1. Press /> Messages.  
2. Select Inbox (also includes SMS messages), Drafts,  
Auto Replies — lets you insert replies the recipient can  
choose from when replying to your message, if the  
recipient’s phone also has this feature.  
or Sent Items.  
If you have more than 9 messages, scroll right or  
left to display the next or previous page.  
Priority — sets the message priority to normal or high.  
Valid Until — sets a date after which no more attempts  
are made to deliver the message.  
50  
               
To send a message, you must address it to at least one  
recipient. All other message fields are optional and you  
can fill them in any order.  
To cancel the message at any time:  
At the message screen, press Cancel (right softkey)  
or press . to cancel the message and save it in  
Drafts.  
Entering Text  
Creating a Message  
In message fields that require you to enter text, you can  
begin entering the text from the keypad when the field  
is highlighted.  
1. Press /> Messages > [Create Message].  
You can also select [Create Message] from Inbox,  
Drafts, or Outbox or begin messages from Contacts,  
Recent Calls, Media Center, or standby mode, or by  
replying to a message in your inbox.  
Tip  
While entering text, press /to choose a text input  
mode from the context-sensitive menu. (See “Entering  
Message Size  
2. Address the message:  
You can create and send messages of up to 100 KB,  
including attachments for MMS. The size of the  
message appears at the top of the display as you are  
creating the message.  
Select To. Enter the phone number or email  
address from the keypad and press r. Repeat  
this action to enter more phone numbers or email  
addresses.  
– or –  
Sending or Canceling  
Press Search (left softkey) to select recipients from  
Contacts or Recent Calls. Highlight recipient(s),  
press rto select them (entries will be checked),  
and then press Done (left softkey).  
To send the message at any time after it has been  
addressed:  
Press Send (left softkey) or press /> Send.  
51  
Adding More Message Options  
To remove a phone number or email address from  
the list of message recipients, highlight the phone  
number or email address and press Remove (left  
softkey).  
Tip  
1. To view more fields in a message, scroll to MORE  
and press r.  
2. To create or edit the subject line, select Subject,  
3. To enter or edit the body of the message:  
enter a subject, and press r.  
Select Message and then use any of the following  
options to enter your message.  
3. To attach a picture, audio, voice recording, or  
video, select Attach > [New Attach] and then select  
an option to attach a file.  
If you have created a signature, the signature  
automatically appears in this field. Text you enter  
appears before your signature. (See Adding a  
Note  
4. To add CC’s, select Cc and add recipient(s).  
5. To insert replies the recipient can choose from  
when replying to your message, select Auto Replies.  
Enter text from the keypad.  
Enter text from the keypad or select a Quick Note  
(see “Quick Notes” on page 54). Press Back (right  
softkey) when you are finished.  
Use a Quick Note. See “Quick Notes” on  
Insert a picture, a ring tone, or an audio file.  
6. To set the priority of the message, select Priority  
and then select a setting.  
When you are finished, press r.  
7. To set a date after which attempts to deliver the  
4. To send the message without additional options,  
press Send (left softkey) or press /> Send.  
message end:  
Select Valid Until, enter a date, and  
press r.  
To set no date, press No Date (left softkey).  
52  
8. To send the message, press Send (left softkey) or  
To create new reply phrases to use in later reply  
Tip  
press /> Send.  
Replying to a Message  
If the message you are replying to was sent with auto  
replies, it contains a numbered list of possible replies.  
Press the number of a reply. The reply is sent  
immediately without any further action.  
Note  
You can reply to a read message while you are viewing  
it or while it is highlighted in the Message Center. You  
cannot reply to unread messages.  
When you reply to a message, some of the fields in  
your reply are filled in automatically. These may include  
To, Message (the first 40 characters of the received  
message), Subject, and Cc.  
More Ways to Begin a Message  
In addition to beginning a message from the Message  
Center, you can begin a message from Contacts, the  
Recent Calls list, standby mode, or the Media Center.  
To reply to a message:  
To begin a message from Contacts:  
1. Display or highlight a read message and press  
Reply (left softkey). (To reply to the sender and all  
recipients, press /> Reply All.)  
1. From the Contacts list, highlight an entry.  
2. Scroll left or right to view the Contacts types until  
you see the icon for the phone number or email  
address to which to send the message.  
2. Select [Create Reply] and enter a reply message or  
select a short reply from the list.  
3. Edit any applicable message fields and press r.  
3. Press Create (left softkey) or press / >  
Create Message.  
4. Press Send (left softkey).  
4. Create and send the message.  
53  
To begin a message from the Recent Calls list:  
called Quick Notes. After you add Quick Notes, you  
can edit them as you would any other text.  
1. From the Recent Calls list, highlight an entry.  
To insert a quick note:  
2. If the entry has more than one phone number  
stored, display the phone number to which to send  
the message.  
1. While you are creating a message, highlight or  
select Message or Subject and then press QNotes  
(left softkey).  
3. Press Create (left softkey) or press /> Create.  
4. Create and send the message.  
2. Select a Quick Note to insert into the message.  
To add a quick note after you have already started  
entering a message, press /> Insert >  
Insert QNotes, and select a note.  
Tip  
To begin a message from standby mode:  
Enter a phone number and press />  
Create Message.  
To create new Quick Notes to use in later messages,  
To begin a message from the Media Center:  
1. From the Media Center, highlight or select a picture  
or audio file.  
Inserting Pictures or Videos  
You can insert pictures or videos from Media Center. If  
the forward locked icon (u) appears next to a file, it  
cannot be included in a message.  
2. Press Send (left softkey).  
3. Create and send the message. The selected file is  
automatically included as an attachment.  
1. Highlight the Message field and press /> Insert >  
Insert Picture or Insert Video (You will see a list of  
available pictures or videos.) Scroll right or left to  
display files in the phone’s memory or on the  
memory card.  
Quick Notes  
When you are filling in the Message and Subject  
message fields, you can add preset words or phrases  
54  
           
2. Highlight a picture or video and press r.  
Removing an Inserted Item  
You can also select Capture Picture or Capture  
Video to take a new picture or video to send.  
Note  
To remove an item inserted into a message:  
1. Select the Message field and highlight the item by  
scrolling to the right.  
Inserting Audio Files or Voice Records  
2. Press Delete (left softkey).  
You can insert audio files from the Media Center or  
voice records from your voice records list. Preloaded  
audio files or files with the forward locked icon (u)  
cannot be included in a message.  
You can also attach items to messages by selecting  
Note  
MORE and then selecting Attach.  
Drafts  
1. Highlight the Message field and press /> Insert >  
Insert Audio. (You will see a list of available audio  
files.)  
While you are creating a message, you can save it in  
Drafts before you send it. You can view, edit, send, or  
delete saved drafts.  
To hear an audio file before inserting it, highlight the  
Tip  
file name and press Preview (left softkey).  
Saving a Message in Drafts  
2. Highlight an audio file or voice record and  
press r. (Scroll right or left to display available  
files in the phone’s memory or on the memory  
card.)  
While you are creating a message, press />  
Save in Drafts and the message will be saved in  
drafts.  
After saving, you can continue to create the message.  
The version you saved in Drafts will not change.  
To record a voice record, select Record Voice and  
record a new voice record.  
55  
   
2. Highlight a message and press Resend (left  
Accessing Saved Drafts  
softkey).  
Press /> Messages > Drafts.  
If your message was sent successfully, Resend will  
Note  
not appear as an option.  
Sent Items  
The Sent Items folder holds all messages that have  
been sent.  
Receiving a Message  
When you receive an MMS message, a message  
notification appears on the display.  
Forwarding Sent Items  
1. Press /> Messages > Sent Items.  
2. Highlight a message and press /> Forward.  
3. Address, edit, and send your message.  
To view the message:  
Press ror press Read (left softkey). The message  
is downloaded from the message server.  
To dismiss the message notification:  
Press Later (right softkey).  
Outbox  
Messages you tried to send are stored in the Outbox.  
This icon 2 appears on the display, reminding you that  
Resending Messages  
you have a new message.  
If a message was not sent from your phone, you can  
resend it.  
Threaded Inbox  
The threaded inbox allows you to organize your  
messages by subject or sender.  
1. Press /> Messages > Outbox.  
1. From your inbox highlight a message.  
56  
       
2. Press / > Threading and select None, Subject or  
Sender.  
Actions for Received Messages  
Deleting  
Navigating a Message  
To delete unread messages:  
As you scroll through a message, numbers, email  
addresses, and Web addresses are highlighted.  
1. Highlight a message and press Delete (left softkey).  
2. Press ror press Yes (left softkey) to confirm.  
To delete read messages:  
Pictures and audio recordings are also highlighted.  
Embedded Objects and Attachments  
1. Highlight or view a message and press />  
Delete Message.  
Messages may contain pictures or audio files as part of  
the body of the message or as attachments.  
2. Press ror press Yes (left softkey) to confirm.  
If a message contains pictures or audio files in the  
body of the message, highlight each picture or audio  
file to view or play it.  
Forwarding  
1. Highlight or view a message and press />  
Forward.  
If a message contains a picture or audio file as an  
attachment, highlight the attachment and press rto  
view the picture or play the audio file.  
2. Address, edit, and send your message.  
Embedded objects and attachments are included  
when you forward a message.  
Audio files in messages do not play if VibeAll is  
set to On.  
Note  
57  
           
3. Press the DC button.  
Locking and Unlocking  
To make a Talkgroup call to a Talkgroup ID in a message:  
1. View the message.  
When you lock a message, it cannot be deleted until  
you unlock it.  
Highlight or view a message and press />  
Lock Message or Unlock Message.  
2. Highlight a Talkgroup ID and then press />  
Talkgroup.  
Calling a Number in a Message  
3. Press the DC button.  
If any field in a message contains a phone number,  
Direct Connect number, or Talkgroup ID, you can call  
or send a Call Alert to that number.  
Storing Message Information to Contacts  
If a message you receive contains a phone number,  
Direct Connect number, Talkgroup ID, or an email  
address in any of the fields, you can store this  
information to Contacts.  
To make a call to a number in a message:  
1. View the message.  
1. View the message.  
2. Highlight a number and press , to make a  
phone call or press the DC button to make a Direct  
Connect call.  
2. Highlight a number or email address and then  
press /> Save Number or Save Email.  
To send a Call Alert to a Direct Connect number in a  
message:  
3. Select [New Contact] to store the number in a new  
entry, or select an entry to store the information to  
an existing entry.  
1. View the message.  
4. With the Contacts type field highlighted, scroll left  
or right to display a Contacts type for the number  
or email address.  
2. Highlight a Direct Connect number and then press  
press /> Alert.  
58  
   
5. Press Save (left softkey).  
Text Messaging (SMS)  
Going to a Website  
With text messaging (SMS), you can receive instant text  
messages from another messaging-ready phone or  
from an email account.  
If a message contains one or more Web addresses,  
you can go to the website.  
1. View the message.  
Your phone's SMS address is [email protected].  
Your PTN is your ten-digit Personal Telephone Number.  
2. Highlight a Web address and then press />  
Go To Website.  
Most traditional phone-to-phone text messages  
arrive as MMS messages on your Motorola Debut  
i856 phone. Your phone can send and receive MMS  
messages.  
Note  
The entire Web address must appear in the  
message. Otherwise, you cannot go to the website.  
Note  
Saving Attachments or Embedded Files  
Your phone can receive SMS text messages, but it  
cannot send them.  
1. View a message.  
2. Highlight an attachment or an embedded picture  
or audio file and then press /> Save Picture,  
Save Audio or Save Attachment.  
Accessing Text Messages  
When you receive a text message, you will see an  
alert. Press Read (left softkey) to display the  
message.  
59  
           
Caller ID Blocking  
Call Waiting  
Caller ID allows people to identify a caller before  
answering the phone by displaying the number of the  
incoming call. If you do not want your number  
displayed when you make a call, follow these steps.  
Call Waiting lets you receive a second call while on an  
active call. Call Waiting is always available, unless you  
turn it off for a specific call.  
If you are on a call and receive a second call, your  
phone emits a tone and displays a message.  
Per-Call Blocking  
To accept the second call and put the active call on hold:  
To block delivery of your number for a single phone call:  
Press Yes (left softkey).  
Press *67before dialing the call.  
To accept the second call and end the active call:  
1. Press .. Your phone rings with the second call.  
2. Answer the second call.  
Your Nextel phone number cannot be blocked from  
calls made to 911, 800, 855, 866, 877, 888, or other  
toll-free phone numbers.  
Per-Line Blocking  
To decline the second call:  
You can request that Nextel Customer Service  
permanently block delivery of your phone number on  
every call you make. In this case, you may need to  
display your number for certain calls.  
Press No (right softkey). If you subscribe to  
voicemail, the call is forwarded to your voicemail  
box, unless you set Call Forward or If Busy to a  
different number.  
To show your number on a per-call basis:  
Press *82before dialing the call.  
60  
       
To end the second call and make the on-hold call active:  
Press .  
Turn Off Call Waiting  
To turn off Call Waiting before a call:  
To make the on-hold call active and put the active call on  
hold:  
Press *70before dialing the call. Call Waiting  
is reactivated once the call ends.  
Press Switch (right softkey).  
To turn off Call Waiting during a call:  
Press /> In Call Setup > Call Waiting > Off.  
Making a Three-Way Call  
To turn Call Waiting back on while still on the call, set  
this option to On.  
Tip  
With Three-Way Calling, you can talk to two people at  
the same time. When using this feature, the normal  
airtime rates will be charged for each of the two calls.  
Making a Second Call  
1. During an active phone call, press /> 3 Way.  
(The first call is placed on hold.)  
1. Place or receive a phone call.  
2. While the call is active, press /> 2nd Call. (The  
2. Enter a second phone number and press ,.  
first call is placed on hold.)  
3. Press Join (right softkey).  
3. Enter a second phone number and press , to  
If one of the people you called hangs up during the  
call, you and the remaining caller stay connected. If you  
initiated the call and are the first to hang up, all callers  
are disconnected.  
place the call.  
For quick ways to enter the number, press /.  
Note  
61  
       
To merge two calls into a three-way call:  
Phone line 1 is active; calls to phone line 1 are  
being forwarded.  
&
)
1. During an active phone call, press /> 2nd Call.  
(The first call is placed on hold.)  
Phone line 1 is active; calls to phone line 2 are  
being forwarded.  
2. Enter a second phone number and press ,.  
3. Press /> Join.  
Phone line 1 is active; calls to phone lines 1  
and 2 are being forwarded.  
;
Call Forwarding  
Phone line 2 is active; calls to phone line 1 are  
being forwarded.  
(
*
Call Forwarding lets you forward all your incoming calls  
to another phone number – even when your phone is  
turned off. You can continue to make calls from your  
phone when Call Forwarding is activated.  
Phone line 2 is active; calls to phone line 2 are  
being forwarded.  
Phone line 2 is active; calls to phone lines 1  
and 2 are being forwarded.  
<
Call Forwarding sends calls to the phone numbers you  
specify. You can forward all calls to one number or  
forward missed calls to different numbers depending  
on the reason you missed the call.  
To forward all calls:  
1. Press /> Settings > Phone Calls > Call Forward >  
Forward > All Calls.  
Forwarding All Calls  
2. Select To.  
When you set your phone to forward all calls, an icon  
appears in the top row of the display:  
If you specified a forwarding number for all calls  
before, this number appears.  
62  
     
To forward calls to this number, highlight it and  
If Busy — Your phone is on a call or transferring data.  
press r.  
If No Answer — You do not answer on the first four  
To delete this number, press rand then press  
rings.  
and hold Delete (left softkey).  
If Unreachable — Your phone is out of coverage or  
powered off.  
3. To enter a forwarding number:  
Enter the number or press Search (left softkey),  
select Contacts, Recent Calls or Memo and then  
select a number.  
You are charged a higher rate for calls you have  
forwarded.  
Note  
To forward missed calls:  
4. Press r. All your calls are now forwarded to the  
1. Press /> Settings > Phone Calls > Call Forward >  
Forward > Detailed.  
number you specified.  
Turning Off Call Forwarding  
If your phone is set to forward all calls, you must first  
turn off call forwarding to access this option. (See  
Note  
1. Press /> Settings > Phone Calls > Call Forward > To.  
2. Set this option to Off.  
2. Select If Busy to specify a forwarding number for  
calls received when your phone is busy.  
All your calls are now sent to your phone.  
Forwarding Missed Calls  
3. If you specified a forwarding number for this type  
of call before, this number displays.  
Calls you miss are forwarded according to the options  
set for missed calls. By default, missed calls are  
forwarded to voicemail.  
To forward calls to this number, highlight it, press  
To delete this number, press r, and then press  
and hold Delete (left softkey).  
You can specify a forwarding number for each type of  
missed call:  
63  
     
4. To enter a forwarding number:  
Special Dialing Codes  
Enter the number or press Search (left softkey),  
select Contacts, Recent Calls or Memo and then  
select a number.  
Non-Emergency Numbers  
5. Press r.  
Nextel supports many “non-emergency” numbers  
(such as #77, 311, and 511) provided by local and state  
governments. These numbers are used to report  
non-emergency incidents. If the situation includes  
imminent danger or loss of life, you should dial 911.  
6. Repeat step 2 through step 5 for If No Answer and  
If Unreachable.  
7. When you are finished, press Back (right softkey).  
Telecommunications Relay Service  
Making International Calls  
Nextel supports services for communicating with  
speech and/or hearing impaired individuals. You can  
dial 711 to reach a local Telecommunications Relay  
Center. You will then be connected to your destination  
number. Relay service works through a  
Communications Assistant who reads messages typed  
into a TDD/TTY device by a speech or hearing  
impaired individual to you. The Communications  
Assistant then types your spoken messages to the  
hearing or speech impaired individual.  
Your service default is “International Calls Restricted.”  
Contact Nextel Customer Service to obtain  
international dialing access.  
Calls placed between the United States and Canada  
do not require an international access code.  
Telecommunications Relay Service is available 24  
64  
             
hours a day, seven days a week, and every call is  
strictly confidential.  
Nextel Phone Services  
Using 711 to reach Telecommunications Relay  
Service may not be available in all areas.  
Note  
Contact Nextel Customer Service to obtain these  
services or for additional information.  
The TTY device must be connected to the phone  
through the micro USB port. A 2.5 mm to micro USB  
adapter is required to support TTY.  
Some services are not available outside of the  
continental United States.  
Note  
Second Line Service  
To enable TTY mode:  
You can have two different phone numbers on the  
same phone. With Second Line Service, you can:  
1. Press /> Settings > Phone Calls > TTY > Use TTY.  
2. Select On to enable TTY mode.  
Get separate bills for each phone line.  
3. For TTY options, highlight Type, press rand then  
Bring in an existing wireless or home phone number  
to Nextel to activate on the second line.  
select an option:  
TTY Type and read text on your TTY device.  
Have two different area codes (must be in same  
market) to convey a local image to callers.  
VCO (Voice Carry-Over) – Speak into the phone  
and read text replies on your TTY.  
Use different ringer styles so that you can tell which  
line is receiving a call.  
HCO (Hearing Carry-Over) – Type text on your  
TTY and listen to voice replies on your phone.  
Forward incoming calls to either your primary or  
alternate line phone number.  
Choose a Second Line Service plan that fits your  
needs.  
65  
 
In order to activate Second Line Service, contact your  
Nextel Sales Representative or call Nextel Customer  
Service.  
Sprint 411  
Dial 411 from your wireless phone to receive  
nationwide listings, movie listings and showtimes,  
restaurant reservations, and driving directions, as well  
as sports scores, stock quotes, and weather conditions.  
Spanish speaking operators available. Receive up to  
three phone numbers or pieces of information per call,  
and be automatically connected at no additional  
charge. Airtime and other charges apply.  
To set the active line (primary or alternate):  
1. Press /> Settings > Phone Calls > Set Line.  
2. Select a phone line to be active.  
When incoming calls are made to a non-active line,  
they will be sent to voicemail without ringing. (See “Call  
66  
Opening the Browser  
Press /> Web > Net.  
5. Data Services  
Options available under the home page include:  
Business Tools – Provides access to business tools.  
Text Messaging – Provides access to text messaging.  
Games, Ringers, & More – Provides access to  
downloadable items.  
News, Sports & More – Lets you access news services.  
NASCAR –Gives you access to NASCAR news and  
stats and provide a link to download NASCAR Sprint  
Cup Mobile.  
Wireless Data Services  
With Web access on your phone, you can browse your  
favorite websites, making it easier than ever to stay  
informed while on the go. Follow sports scores,  
breaking news, and weather, and shop on your phone  
anywhere on the Nextel National Network.  
Email & IM – Allows you to send email and IMs.  
Your Bookmarks – Allows you to access and manage  
your bookmarks.  
Search – Launches a Web search.  
Go to URL – Lets you enter website addresses.  
Using the Web Browser  
My Account – Lets you configure and manage your  
browser settings.  
Navigating the Web from your phone is easy once you  
get the hang of it.  
Help – Displays online help.  
67  
               
2. Highlight Mark this page and press r.  
Tip  
To go back one page, press the *key .  
3. Confirm or edit the bookmark name, scroll to the  
bottom of the screen, and then press Done (left  
softkeys) to save the bookmark.  
To access the browser menu options, press and  
hold /from any Web page.  
Going to a Specific Website  
Bookmarking a page does not store the page  
contents, just its address.  
Note  
To go to a particular website by entering a Web address  
(URL):  
Some pages cannot be bookmarked. Whether a  
particular Web page may be marked is controlled by  
its creator.  
1. From the home page, select Go to URL.  
2. Press Edit (left softkey).  
Accessing a Bookmark  
From the home page:  
3. Use your keypad to enter the Web address and  
press Done (left softkey).  
4. Press Options (right softkey) > accept to go to the  
1. Select Your Bookmarks.  
website.  
2. Highlight a bookmark and press r(or press the  
number corresponding to the bookmark).  
Not all websites are viewable on your phone.  
Note  
From any other Web page:  
Creating a Bookmark  
1. Press and hold /to open the browser menu.  
2. Select View Bookmarks.  
Bookmarks allow you to store the address of your  
favorite websites for easy access at a later time.  
1. Go to a Web page and press and hold /to open  
the browser menu.  
68  
       
3. Select a bookmark and press r(or press the  
Downloading Content  
number corresponding to the bookmark).  
To return to the home page from any other Web  
page, press ..  
Tip  
Your phone arrives with Java applications and games  
loaded and ready to install. You can download and  
install more Java applications. For more information on  
Reloading a Web Page  
1. Press and hold /to open the browser menu.  
Check the Games, Ringers & More menu option for a  
catalog of items available for purchase and download.  
2. SelectRefresh this page. (The browser will reload the  
current Web page.)  
You can also go to www.nextel.com and sign on to your  
account for a wide selection of available Java  
applications and downloading instructions.  
Restarting the Web Browser  
If the Web browser seems to be malfunctioning or  
stops responding, you can usually fix the problem by  
simply restarting the browser.  
Using Java applications may cause your phone’s  
battery power to deplete more quickly.  
Note  
1. Press and hold /to open the browser menu.  
2. Select More... > Restart Browser.  
69  
                 
Sound Settings  
6. Settings  
Ring Tones  
Your phone provides a variety of ringer options that  
allow you to customize your ring and volume settings.  
These options allow you to identify incoming calls and  
messages by the ring.  
Selecting Ringer Types  
1. Press /> Multimedia > Ring Tones.  
2. Scroll through the list of ring tones. A sample  
ringer will sound as you highlight each option.  
3. Press ror press Assign (left softkey).  
4. Select the function(s) to which to assign the current  
ringer by highlighting the option and pressing r.  
(A check mark appears next to selected options.)  
5. When you are finished, press Done (left softkey) to  
assign the ringer to the selected function(s).  
70  
           
Assigning a Ring Tone to a Contact  
Downloading More Ring Tones  
You can also assign a ringer to a specific contact entry  
so you know who's calling without looking at the  
phone.  
To use other ring tones, you can download them into  
your phone for a fee.  
Press /> Multimedia > Ring Tones > Buy Ring Tones.  
1. Press / > Multimedia > Ring Tones.  
Ring tones may be downloaded only once. If you  
delete a ring tone from your phone and wish to  
reassign it, you must purchase it again.  
Note  
2. Scroll through the list of ring tones and select one.  
A sample ringer will sound as you highlight each  
option  
Managing Memory  
3. Press ror press Assign (left softkey).  
To view the amount of memory available for custom ring  
tones:  
4. Select A Contact....  
5. Highlight a Contacts entry and press rto assign  
1. Press /> Multimedia > Ring Tones.  
the ringer.  
2. Make sure Vibrate All is set to Off.  
Viewing Ring Tone Assignments  
1. Press /> Multimedia > Ring Tones.  
2. Make sure Vibrate All is set to Off.  
3. Highlight any ring tone and press />  
Memory Usage.  
Deleting custom ring tones frees memory.  
3. Highlight any ring tone and then press />  
Deleting Ring Tones  
Overview.  
Deleting a ring tone from the list deletes it from your  
phone.  
4. Scroll to view ring tones assigned to features and  
Contact entries.  
71  
   
In most cases, when you delete a ring tone that you  
purchased from your phone, you will have to purchase  
it again.  
Press /> Multimedia > Ring Tones > Vibrate All. Set  
this option to On or Locked.  
Setting this option to Locked requires you to press  
and hold the volume control up to turn Vibrate All off.  
The Locked option helps prevent you from  
accidentally turning Vibrate All off.  
Tip  
To delete a ring tone:  
1. Press /> Multimedia > Ring Tones.  
2. Make sure Vibrate All is set to Off.  
3. Highlight a ringtone and press /> Delete.  
4. Press Yes (left softkey) to confirm.  
To deactivate Vibrate All:  
1. Press and hold the volume key up to unlock  
vibrate all.  
2. Press the volume key up repeatedly to select a  
volume level or press /> Multimedia > Ring Tones >  
Vibrate All > Off.  
Vibrate Settings  
Vibrate All  
These icons indicate how the ringer is set:  
The Vibrate All option allows you to be notified of calls  
and messages with a vibration instead of an audible  
alert.  
The phone always vibrates instead of  
/
.
"
making a sound.  
To activate Vibrate All:  
The phone vibrates instead of making a  
sound for phone calls.  
Press and hold the volume button down in standby  
mode. (Pressing and holding displays “VibeAll:  
On.” Continuing to hold the button down displays  
“VibeAll: Locked.”  
Direct Connect calls, Group Connect  
calls, and Talkgroup calls are heard  
through the earpiece, not the speaker.  
– or –  
72  
     
To activate Silence All:  
The phone vibrates then rings for all calls.  
The ring volume is set to zero for all calls.  
/
With the phone in standby mode press and hold  
the volume key down until the ringer level is set  
at 0. (The screen will display ,.)  
,
Ring and Vibrate  
To deactivate Silence All:  
To set your phone to ring and vibrate when you receive  
phone calls or Call Alerts:  
Press the volume key up repeatedly to select a  
volume level.  
1. Press / > Multimedia > Ring Tones.  
2. Make sure Vibrate All is set to Off.  
3. Scroll through the list and select a ring tone.  
4. Press /> Assign w/Vibe.  
To set your phone to vibrate instead of making a sound for  
some features but not others:  
1. Press /> Multimedia > Ring Tones.  
2. Make sure Vibrate All is set to Off.  
3. Select Vibrate from the list of ring tones.  
5. Select Phone Line 1 and/or Phone Line 2 and press  
Done (left softkey).  
4. Select the feature(s) to which to assign Vibrate and  
press Done (left softkey).  
This icon/appears on the display.  
Silence All  
To set ring options for Direct Connect calls, Group  
Connect calls, and Talkgroup calls, see “Vibrate  
Note  
The Silence All option allows you to mute all sounds  
without turning your phone off.  
73  
   
Adjusting the Phone’s Volume Settings  
Display Settings  
Adjust your phone’s volume settings to suit your needs  
and your environment.  
Changing the Backlight Time Length  
1. Press /> Settings > Volume.  
Select how long the display screen and keypad remain  
backlit after any keypress is made.  
2. Select Ringer/Alerts, Speaker, Earpiece, Multimedia or  
Keypad.  
1. Press /> Settings > Display/Info > Backlight.  
3. Choose a volume level and press r.  
2. Highlight an option, press r, and then choose a  
setting.  
You can adjust the ringer volume in standby mode  
(or the earpiece volume during a call) by using the  
volume key on the left side of your phone.  
Tip  
For Timer or Java Timer, select a time.  
For Sensor or PTT Backlight select On or Off.  
Beep  
Long backlight settings reduce the battery’s talk and  
standby times.  
Note  
Set your phone to alert you with an audible tone once  
a minute during a voice call.  
Changing the Display Screen  
1. Press /> Settings > Phone Calls > Minute Beep.  
Choose what you see on the display screen while  
powering on or off and when in standby mode.  
2. Highlight On or Off and press r.  
1. Press /> Settings > Display/Info > Wallpaper.  
2. Select an image and press View (left softkey) to view  
it. Press Back (right softkey) to return to the  
available images.  
74  
         
3. Press rto assign an image.  
Changing the Theme  
Setting Wallpaper to Change Automatically  
Customize your phone’s display appearance by  
selecting a theme to reflect your personality.  
When you set your wallpaper to change automatically,  
your phone uses each of the pictures inMedia Center as  
wallpaper, cycling through them at a pace you choose.  
1. Press /> Settings > Display/Info > Theme.  
2. Highlight an option and press r.  
1. Press /> Settings > Display/Info > Wallpaper >  
Auto Cycle.  
Changing the Clock Display  
2. Select how frequently the wallpaper will change  
Select a format for the time and date display and  
choose whether the time and date appear in standby  
mode.  
then press r.  
Changing the Phone’s Menu Style  
1. Press /> Settings > Display/Info > Clock.  
Choose how your phone’s menu is displayed on the  
screen.  
2. Select Display On/Off, Time Format or Date Format and  
then press r.  
1. Press /> Settings > Display/Info > Menu View.  
3. Select an option and press rto apply the setting.  
2. Highlight an option and press r.  
Icon View to view the main menu as a grid of  
The year is set by the network, and even though it is  
an option, it cannot be changed.  
Note  
icons. Icons animate when they are highlighted.  
List View to display the menu as a list.  
Changing the Text Size  
Tab View to display the menu as a row of icons on  
the bottom of the screen.  
Adjust the font when entering text (for example, when  
using the notepad or when adding a Contacts entry).  
75  
   
1. Press /> Settings > Display/Info > Text Size.  
2. Highlight Receive All, Message Mail Only or Delay All  
and press r.  
2. Highlight an option and press r.  
Delay All is the default setting.  
Note  
Tip  
Messaging Settings  
To set notification options during a call press />  
In Call Setup > Notifications.  
Staying connected to your friends and family has never  
been easier. With your phone’s advanced messaging  
capabilities, you can send and receive many different  
kinds of text messages without placing a voice call.  
(For more information see “Multimedia Messages  
Customizing MMS  
The Setup menu lets you customize MMS for your  
phone:  
Signature — Enter text here to create a signature that is  
automatically inserted at the end of each message.  
Messaging settings make messaging easier by letting  
you decide how you would like to be notified of new  
messages, create a signature with each sent message,  
and create your own preset messages.  
Quick Notes — lets you create new Quick Notes and  
edit or delete Quick Notes you have created.  
Cleanup — controls how long messages remain in the  
Inbox and Sent Items before they are deleted.  
Setting Message Notification  
Dlvy Rpt Default— allows you to set the default for the  
Delivery Report Option to on of off.  
When you receive a message, your phone notifies you  
by displaying an icon on your display screen. You can  
also choose to be notified with a sound while making a  
phone call.  
Memory Size — displays a report on phone memory.  
MMS Setup — allows you to set up the following:  
Friendly Name — lets you enter the name displayed  
in the From field on messages you send.  
1. Press /> Settings > Phone Calls > Notifications.  
76  
             
Download Options — lets you control message  
downloads. Automatic downloads messages  
automatically. Manual requires you to reply to a  
prompt before messages download to your  
phone.  
To edit a Quick Note or reply phrase:  
1. From the Setup menu, select Quick Notes or  
MMS Setup > Replies.  
2. Select a Quick Note or reply phrase you have  
created.  
Replies — lets you create new reply phrases and  
edit or delete reply phrases you have created.  
3. Edit the text and press r.  
To access the Setup menu:  
To delete a Quick Note or reply phrase:  
1. Press /> Messages.  
1. From the Setup menu, select Quick Notes or  
MMS Setup > Replies.  
2. Highlight [Create Message] and press /> Setup.  
2. Highlight a Quick Note or reply phrase you have  
created.  
This option is available from many context-sensitive  
menus when you are using MMS.  
Tip  
3. Press Delete (left softkey) and then press ror  
press Yes (left softkey) to confirm.  
Quick Notes and Reply Phrases  
You can edit or delete all Quick Notes. You can only  
edit or delete Reply phrases that you created.  
To add a Quick Note or Reply phrase:  
Note  
1. From the Setup menu, select Quick Notes or  
MMS Setup > Replies.  
Setting the Cleanup Option  
2. Select [New Quicknote] or [New Reply], or press  
New (left softkey).  
The cleanup option controls how long messages  
remain in the Inbox and Sent Items before they are  
deleted. You set the cleanup option for the Inbox and  
Sent Items separately.  
3. Enter text and press r.  
77  
   
The cleanup option deletes only read, unlocked  
messages.  
Airplane Mode  
To set the cleanup options:  
Sometimes you may want to have your phone on, but  
turn off its ability to make and receive calls and other  
transmissions.  
1. From the Message Center, press /> Setup >  
Cleanup > Inbox orSent Items.  
To set your phone so that it cannot make or receive phone  
calls, Direct Connect calls, Group Connect calls, Talkgroup  
calls, or transfer data:  
2. Choose a cleanup option.  
3. To automatically delete messages now, press r  
or press Yes (left softkey). To delete messages later,  
press No (right softkey).  
1. Press /> Settings > Advanced > Transmitters.  
2. Select Off and press r.  
Adding a Customized Signature  
3. Press Yes (left softkey).  
Add a customized signature to each message you  
send.  
When in Transmitters Off mode, your phone’s standby  
screen displays “Transmitters Off.”  
1. Press /> Messages> /> Setup > Signature. If you  
do not wish to attach a signature to your outgoing  
messages, press Delete (left softkey).  
While powering on your phone, you can turn  
transmitters off by pressing .for more than five  
seconds.  
Note  
2. Enter a signature and press r. (See “Entering  
To restore your phone’s ability to do all these things:  
Set this option to On and then press Yes (left  
softkey).  
78  
             
When Transmitters is set to Off, your phone’s  
Bluetooth capability is disabled, and all active  
Bluetooth connections are dropped.  
Note  
Headset Options  
To set your phone to send incoming sound to a headset  
only, or to a headset and a speaker at the same time:  
Setting One Touch Direct Connect  
1. Press /> Settings > Advanced > Headset/Spkr.  
2. Select HdsetOnly to send incoming sound to the  
One Touch Direct Connect sets your phone to call the  
most recent Direct Connect number or Group on the  
Recent Calls list, or a Direct Connect number you  
choose, every time you press the DC button.  
headset only.  
– or –  
Select Hdset&Spkr to send incoming sound to the  
headset and ring tones to the speaker.  
1. Press /> Push To Talk > PTT Options >  
One Touch DC.  
Profiles  
2. Select from Off, Quick PTT, Last Call, Assigned Number,  
Send Picture, Send My Info or Send Contact and  
press r.  
A profile is a group of settings saved together so that  
you can apply them to your phone easily.  
If you are entering a Talkgroup number, enter #  
Tip  
before the number.  
Your phone arrives with preset profiles. You can also  
create your own profiles.  
79  
             
When you do this, your phone either:  
Viewing Profiles  
Updates the profile in effect to reflect these changes,  
without notifying you.  
To view the profiles stored in your phone:  
1. Press /> Tools > Profiles.  
– or –  
Creates a temporary profile that contains these  
changes.  
2. Highlight a profile and press View (left softkey).  
The profile that is currently in effect on your phone  
has a checkmark next to it.  
Tip  
To set your phone to create a temporary profile that contains  
changes you make to settings:  
3. Scroll to view settings.  
1. Press /> Tools > Profiles.  
Switching Profiles  
2. Press /and then select Setup > Temp Profile.  
3. Set this option to On.  
1. Press /> Tools > Profiles.  
2. Highlight a profile and press r.  
The profile you selected is now in effect.  
To set your phone to update the profile in effect to reflect any  
changes you make to settings:  
Set Temp Profile to Off in step 3 above.  
How Changing Settings Affects Profiles  
Temporary Profiles  
Many of the settings contained in profiles can be set  
without switching or editing profiles — for example, by  
selecting Settings or Ring Tones to set options, or by  
setting the volume of the phone’s ring using the  
volume controls.  
If your phone is set to create temporary profiles, a  
temporary profile is created when you make changes  
to settings without switching or editing profiles. These  
stay in effect until you switch profiles or power off your  
phone.  
80  
     
Temporary profiles and any settings you have changed  
are marked with asterisks (*).  
2. Enter a name and press r.  
3. To base this profile on an existing profile, select  
Copy From and then select a profile and press r. If  
you do not choose a profile to copy from, the new  
profile is based on a default profile.  
Storing a Temporary Profile  
To store a temporary profile as a new profile:  
1. Press /> Tools > Profiles.  
4. Press Create (left softkey).  
2. Highlight the temporary profile and press />  
Store As New.  
5. Scroll through the list of options and set their  
values.  
3. Enter a name and press r.  
6. When you are finished, press Done (right softkey).  
To overwrite the profile the temporary profile is based on:  
1. Press /> Tools > Profiles.  
Editing Profiles  
1. Press /> Tools > Profiles.  
2. Highlight the temporary profile, press  
/> Store Changes, and then press Yes  
(left softkey).  
2. Highlight a profile, press /and then select Edit.  
3. Scroll through the list of options and set their  
values.  
The temporary profile is stored with the name of the  
profile it is based on. The profile it is based on, as it  
existed before you made changes to settings, is  
gone.  
Note  
4. When you are finished, press Done (right softkey).  
Deleting Profiles  
To delete a profile:  
Creating Profiles  
1. Press /> Tools > Profiles.  
1. Press /> Tools > Profiles > [New Profile].  
81  
     
2. Highlight a profile, press /, and then select Delete.  
3. Press ror press Yes (left softkey).  
To delete all profiles:  
entries. When you are finished, press Done  
(right softkey).  
DC/GC – sets filtering options for Direct Connect  
calls and Talkgroup calls.  
1. Press /> Tools > Profiles.  
Off – notifies you of all DC and Talkgroup calls.  
On – ignores all DC and Talkgroup calls.  
2. Press /and then select Delete All.  
3. Press ror press Yes (left softkey) to confirm.  
Group – sets filtering options for Group Connect  
calls.  
Setting Call Filtering  
Off – notifies you of all Group Connect calls.  
On – ignores all Group Connect calls.  
The call filtering setting in each profile lets you control  
which calls, Call Alerts, and message notifications your  
phone notifies you of, and which it ignores.  
Alerts – sets filtering options for Call Alerts.  
Off – notifies you of all Call Alerts.  
1. While setting options for a profile, select Call Filter.  
On – ignores all Call Alerts.  
Notifications – sets filtering options for message  
notifications.  
2. Select a filtering option  
Phone – sets filtering options for phone calls.  
Off – notifies you of all messages.  
Voice Messages – ignores all voice messages.  
Text Messages – ignores text messages.  
All – ignores all messages.  
Off – notifies you of all calls.  
All – ignores all calls.  
All Contacts – notifies you only of calls from  
Contacts.  
Some Contacts – notifies you only of calls from  
selected Contacts. Select up to five Contacts  
82  
 
2. Press and hold /until a confirmation screen  
The message notification screen still appears when  
you receive a message you have set not to sound a  
tone or vibrate.  
Note  
appears.  
3. Press ror press Yes (left softkey).  
3. Press Done (right softkey).  
4. Press a number key for the shortcut and press r.  
5. To record a voice name for the shortcut, select  
Voice (optional). Follow the prompts to say and  
repeat the name. Speak clearly into the  
microphone.  
Phone Setup Options  
Shortcuts  
6. Press Done (left softkey).  
Your phone offers you the option of assigning shortcuts  
to favorite or often-used functions. Pressing the /key  
in standby mode followed by the assigned shortcut key  
will launch your personally designated shortcuts.  
7. If the number key you select is already assigned to  
a shortcut, a prompt appears asking to replace the  
existing shortcut.  
Press Yes (left softkey) to replace the existing  
shortcut.  
Creating a Shortcut  
When you receive your phone, all number keys may  
already be assigned to shortcuts. If this is the case,  
you can create new shortcuts by deleting or  
replacing existing shortcuts  
Note  
Press No (right softkey) to keep the existing  
shortcut and assign another number key.  
Using a Shortcut  
1. Go to a menu item.  
To access a shortcut using the shortcut number:  
1. From standby mode, press /.  
For example, to create a shortcut to the screen for  
creating a new Contacts entry: Press /> Contacts  
and then highlight [New Contact].  
83  
       
2. On your keypad, press the number assigned to the  
6. Press Done (right softkey).  
shortcut.  
To change the number or voice name assigned to a  
shortcut:  
To access a shortcut using the voice name:  
1. Press and hold s.  
1. Press /> Settings > Personalize > Shortcuts.  
2. Say the voice name you assigned to the shortcut.  
The shortcut with that voice name is then  
highlighted.  
2. Highlight any shortcut and press Edit (left softkey).  
3. With Key or Voice highlighted, press rto change  
assignments.  
To view a list of your shortcuts:  
4. Press Done (left softkey).  
Press /> Settings > Personalize > Shortcuts.  
Deleting Shortcuts  
Editing a Shortcut  
To delete a shortcut:  
To change the order of shortcuts:  
1. Press /> Settings > Personalize > Shortcuts.  
2. Highlight a shortcut and press /> Delete.  
3. Press ror press Yes (left softkey) to confirm.  
To delete all shortcuts:  
1. Press /> Settings > Personalize > Shortcuts.  
2. With any shortcut highlighted, press /> Reorder.  
3. Highlight the shortcut you are moving and press  
Grab (left softkey).  
1. Press /> Settings > Personalize > Shortcuts.  
2. With any shortcut highlighted, press /> Delete All.  
3. Press ror press Yes (left softkey) to confirm.  
4. Scroll to a new location and press Insert (left  
softkey).  
5. Repeat step 2 through step 4 for all the items you  
are moving.  
84  
   
Carousel  
Personalize  
Carousel is an iconic list of application shortcuts  
displayed horizontally at the bottom of the display in  
standby mode that allows you to access a total of nine  
applications.  
In addition to Shortcuts, the Personalize menu gives  
you other options to access menu items easily.  
Press /> Settings > Personalize, select an option,  
To scroll through the list of icons, press the navigation  
key right or left to highlight an icon, and press rto  
select the icon.  
and set your preferences.  
Reorder Menu to change the main menu order.  
Up Key, Down Key, Left Key, Right Key, Center Key, Left  
Softkey, Right Softkey, to set one-touch menu  
access from the standby screen.  
Configuring Auto Hide Settings  
Press /> Settings > Personalize > Carousel >  
Power Up to set the menu item displayed when  
you power on your phone. (Default Ready starts in  
standby mode.)  
Auto Hide.  
Select from Off, 2 seconds, 4 seconds, or 8 seconds.  
Carousel will not time out if Off is selected.  
Note  
Call Answer Mode  
Select how to answer incoming calls on your phone.  
1. Press /> Settings > Phone Calls.  
Assigning Carousel Applications  
1. Press /> Settings > Personalize > Carousel.  
2. Select an option and press r.  
Any Key Ans: SelectOn to allow you to answer an  
2. Assign applications to Left 1, Left 2, Left 3, Left 4,  
Center, Right 1, Right 2, Right 3, and Right 4.  
incoming call by pressing any key.  
3. Press rto assign the applications.  
– or –  
85  
         
Select Off to require you to press , to answer all  
incoming calls.  
Setting Prepend Dialing  
The Prepend feature lets you set a prefix to be added to  
the beginning of all dialed numbers, such as a country  
code for international calls.  
Auto Ans to set your phone to automatically  
answer an incoming call after a specified number  
of rings when connected to a headset or  
hands-free car kit.  
1. Press /> Settings > Phone Calls > Prepend.  
Off to disable Auto-Answer.  
2. Select Prepend > On.  
1 Ring, 2 Rings, 3 Rings or4 Rings to answer calls  
automatically when the phone is connected to  
a hands-free car kit or a headset (sold  
separately). In Auto-Answer mode, your  
phone will answer calls even if you are not  
present.  
3. Enter a prefix in the Number field (such as +1 for  
international calls) and then press r.  
To deactivate this feature, select Off during step 2  
above.  
This setting does not apply to 911 or Sprint 411.  
Note  
Slide Activation to set your phone to answer calls by  
sliding the phone open (Slide to Ans) and end calls  
by sliding the phone closed (Slide to End).  
Resetting Your Phone  
Resetting Phone Settings  
Display Language  
Resetting phone settings restores all the factory  
defaults, including the ringer types and display settings.  
The Recent Calls, Scheduler, and all text Messages will  
be erased, Contacts are not affected.  
You can choose to display your phone’s onscreen  
menus in several languages.  
1. Press /> Settings > Display/Info > Language.  
2. Highlight English, Español, Português, Français or  
Automatic and press r.  
1. Press /> Settings > Advanced > Reset Defaults >  
Reset Settings.  
86  
     
2. Enter your phone’s six-digit security code and  
press Ok (left softkey). (A disclaimer is displayed.)  
GPS Privacy Options  
Your phone’s GPS privacy options control whether Java  
applications or other software applications on your  
phone may view the location of your phone. You may  
set your phone to one of these GPS privacy options.  
Your security code is a six-digit number used for  
resetting your phone. Please contact Nextel  
Customer Service if you do not know your security  
code.  
Note  
Privacy options do not apply to the transmission of  
location information during emergency 911 calls.  
Note  
3. Read the prompt and press Yes (left softkey) to  
complete the reset. (Press No [right softkey] to  
cancel.)  
To set your GPS privacy options:  
1. Press /> Tools > GPS > Privacy.  
Resetting All  
2. If your GPS PIN security feature is enabled, enter  
Feature” on page 88. for more information.)  
Selecting Reset All resets phone settings and clears all  
phone data, including Contacts, History, Scheduler, and  
Messaging.  
3. Select a privacy option:  
1. Press /> Settings > Advanced > Reset Defaults >  
Reset All.  
Restricted — No Java or similar software  
applications may view the location of your phone.  
However, location information may still be  
available to the phone’s owner, fleet manager, or  
account administrator.  
2. Enter your security code and press Ok (left softkey).  
3. Read the prompt and press Yes (left softkey) to  
complete the reset. (Press No [right softkey] to  
cancel.)  
Unrestricted — All applications may view the  
location of your phone, without notifying you.  
87  
     
By Permission — When an application attempts to  
view the location of your phone, you will be  
prompted to give permission. However, location  
information may still be available to the phone’s  
owner, fleet manager, or account administrator.  
To change your GPS PIN:  
1. Press /> Settings > Security > Change Passwords >  
GPS PIN.  
2. Enter the current GPS PIN and press Ok (left  
softkey).  
Setting the GPS PIN Security Feature  
3. Enter the new GPS PIN and press Ok (left softkey).  
To prevent your GPS privacy settings from being  
altered without your knowledge, your GPS privacy  
option can be protected by a PIN.  
4. Reenter the new GPS PIN to confirm and then  
press Ok (left softkey).  
Java Applications & GPS Security  
When you receive your phone, the GPS security feature  
is turned off, so you do not have to enter a GPS PIN to  
access your GPS privacy options. If you turn this  
feature on, you will be required to enter a GPS PIN to  
access your GPS privacy options.  
Some Java applications can make use of your phone’s  
GPS feature to determine the approximate  
geographical location of your phone. (See “GPS  
Enabled” on page 115 for more information on the GPS  
feature.) However, for privacy reasons, you may not  
always want Java applications to access the location of  
your phone. Your phone protects your privacy by giving  
you the option to block all or some Java applications  
from accessing the location of your phone.  
To turn the GPS Enabled security feature on or off:  
1. Press /> Settings > Security > GPS PIN.  
2. Select On or Off.  
3. Enter the current GPS PIN.  
The default GPS PIN is 0000.  
Tip  
4. Press Ok (left softkey).  
88  
     
Setting Privacy for All Java Applications  
Setting Privacy for Each Java Application  
1. Press /> Games and Apps.  
on setting the privacy options for your java applications.  
These options control the privacy of all Java  
applications on your phone.  
2. Highlight an application or suite of applications.  
If the application has requested access to the  
location of your phone, this icon fappears when  
you highlight the application.  
Tip  
Granting or Denying Permission  
When a java application requests access to the  
location of your phone, a screen appears informing  
you.  
3. Press /> Permissions.  
4. Select privacy options for this application (you may  
set them for each of the menus available under  
Permissions):  
To grant or deny a request:  
1. Press Grant (left softkey) or Deny (right softkey) to  
grant or deny a request.  
Always — The application always has permission  
to access the phone’s location without notification.  
Ask — When the application requests access to  
the phone’s location, you are prompted to grant  
2. Select Always to always take this action for the  
application, For this session to keep this action  
without notification until the phone is powered off,  
or Only Once to take this action for this instance only  
(you will be prompted again for subsequent  
requests).  
Never — Requests for location are denied without  
notification.  
89  
     
added. Set Add Prefix to Ask Me to set your phone to  
display a prompt asking you whether to add the  
prefix as you save My Info from other phones to  
Contacts.  
DC/GC Options Menu  
The PTT Options menu controls how your phone  
handles Direct Connect calls, Group Connect calls, and  
Talkgroup calls.  
PTT Backlight — controls whether or not the backlight  
displays when using Direct Connect.  
To access the DC/GC Options menu:  
Security Settings  
Press /> Push To Talk > PTT Options.  
Tkgrp Silent — controls whether you hear your  
Talkgroup calls.  
SIM Card Security  
Tkgrp Area — lets you define your Talkgroup area.  
Except for making emergency calls, your phone  
does not function without the SIM card.  
Important  
One Touch DC — sets One Touch Direct Connect.  
Alert Type — controls how your phone notifies you  
when you receive Direct Connect calls, Group  
Connect calls and Talkgroup calls.  
SIM Card’s PIN  
You can protect access to your phone by using the SIM  
card’s PIN (Personal Identification Number). When you  
enable SIM PIN, you must enter the PIN each time you  
power up the phone. You can change or disable the  
SIM PIN.  
On/Off Settings — sets your phone’s ability to send and  
receive pictures in Direct Connect calls. See “Starting  
Store Received Info — lets you specify a prefix, such as  
a country code for international calls, to be  
automatically added to phone numbers you receive  
in My Info from other phones, when you store the My  
Info to Contacts. Select Prefix to enter the prefix to be  
Turning SIM PIN On and Off  
1. Press /> Settings > Security > SIM PIN.  
90  
               
2. Select On or Off.  
3. Enter the new SIM PIN and press Ok (left softkey).  
3. Enter the current SIM PIN.  
4. Reenter the new SIM PIN to confirm and then  
press Ok (left softkey).  
The default SIM PIN is 0000. Change your PIN to  
prevent fraudulent use of the SIM Card.  
Important  
Unblocking the PIN  
If you enter your PIN incorrectly three times, your SIM  
card is blocked. To unblock your SIM card, you must  
contact Nextel Customer Service to get a PIN Unblock  
Code (PUK). Follow their instructions for unblocking  
your SIM PIN.  
4. Press Ok (left softkey).  
Entering the PIN  
1. Turn on your phone.  
2. When the SIM PIN screen appears, enter your  
SIM PIN and press Ok (left softkey).  
If you unsuccessfully enter the PUK code ten  
times, your SIM card is permanently blocked and  
must be replaced. If this happens, you get a  
message to contact Nextel Customer Service.  
Except for making emergency calls, your phone  
does not function with a blocked SIM card.  
Important  
If you enter your PIN incorrectly three times, your  
Important  
Changing the PIN  
SIM PIN must be turned on in order to access this  
Your Phone’s Lock Feature  
Note  
feature.  
Locking Your Phone  
1. Press /> Settings > Security > Change Passwords >  
When your phone is locked, you can only make calls to  
911. To lock and unlock your phone, you must enter  
your phone’s four-digit lock code. If you do not know  
SIM PIN.  
2. Enter the current SIM PIN and press Ok (left  
softkey).  
91  
     
your phone’s lock code, try 0000; if this does not work  
contact Nextel Customer Service for assistance.  
To call an emergency number, dial 911and  
press ,  
1. Press /> Settings > Security.  
Locking Your Keypad  
2. Select Phone Lock > Lock Now, enter the unlock  
code, and press Ok (left softkey). (To set your  
phone to lock the next time it is turned on, select  
Auto Lock.)  
When your phone is closed and in standby mode, your  
keypad locks to prevent accidental key presses.  
To lock your keypad now, press /> Settings >  
Security > Keypad Lock > Lock Now.  
Unlocking Your Phone  
To change how long your phone waits before it  
automatically locks your keypad, press />  
Settings > Security > Keypad Lock > Auto Lock and  
select a time interval of 2 seconds, 4 seconds,  
8 seconds or Off.  
At the “Enter Unlock Code” prompt, enter your  
unlock code and press Ok (left softkey).  
Changing the Lock Code  
1. Press /> Settings > Security > Change Passwords.  
If the keypad setting is set to off, your keypad will  
Note  
remain unlocked.  
2. Select Unlock Code then enter your current unlock  
code and press Ok (left softkey).  
Unlocking Your Keypad  
3. Enter and reenter your new lock code, pressing  
Ok (left softkey) after each.  
To unlock your keypad, press Unlock (right softkey)  
and then press Yes (left softkey).  
Calling in Lock Mode  
Sliding your phone open will also unlock your phone.  
Note  
You can place calls to 911 when in lock mode.  
92  
         
Duplicate calls (same number and type of call) may  
only appear once on the list.  
7. Recent Calls  
When you select a call to view its details, you see  
information such as the name associated with the call,  
the number, date, time, and duration of the call.  
The Recent Calls list records only calls that occur  
while the phone is turned on. If a call is received  
while your phone is turned off, it will not be included  
in the phone’s Recent Calls list.  
Note  
If you return a call from the voicemail menu, it will not  
be included in your phone’s Recent Calls list.  
Calls and Call Alerts  
If the number of a recent call is stored in Contacts, the  
following information appears:  
About Recent Calls  
The name assigned to the number.  
The Recent Calls list displays the last 20 numbers (or  
Contacts entries) for calls you placed, accepted, or  
missed, and for Call Alerts you have received. It also  
displays My Info and contact information sent to you  
from other phones. It is continually updated as new  
numbers are added to the beginning of the list and the  
oldest entries are removed from the bottom of the list.  
The Contacts type icon associated with the number.  
If the item contains more than one number or  
address stored,<>surrounds the Contacts type icon.  
The Direct Connect number Contacts type icon  
appears when you receive a Direct Connect call or Call  
Alert, even if the number is not stored in Contacts.  
93  
       
Call Alerts you have received appear as Direct Connect  
calls. Like all items in the Recent Calls list, they remain  
listed until you delete them or until they reach the end  
of the list.  
When you select My Info from other phones to view its  
details, you see all the information sent.  
If you receive My Info from the same phone more than  
once, only the most recently sent version appears in  
the Recent Calls list.  
For phone calls, an additional icon appears giving  
information about the call.  
Contact Information From Other Phones  
-
1
#
A call you made.  
The Recent Calls list displays contact information sent  
from other phones. This information comes from the  
other phone’s Contacts list or Recent Calls list. See  
A call you received.  
A missed call. Missed calls appear on the  
Recent Calls list only if you have Caller ID.  
When you select a call to view its details, you see  
information such as the name associated with the call,  
the number, date, time, and duration of the call.  
This icon 2appears with contact information on the  
Recent Calls list.  
Contact information in the Recent Calls list displays:  
My Info From Other Phones  
The name contained in the contact information.  
The Contacts type icon associated with the number  
or address contained in the contact information. If the  
item contains more than one number or address  
stored, <> surrounds the Contacts type icon.  
The Recent Calls list displays My Info sent from other  
This icon 3appears with My Info sent from other  
phones, along with the Direct Connect number of the  
person who sent the information.  
The name or Direct Connect number of the person  
who sent the contact information appears as a  
94  
   
separate item on the Recent Calls list, above the  
information sent. If one person sends you more than  
one item of contact information, all the items appear  
below the person’s name or Direct Connect number.  
Recent Calls Options  
Select a Recent Calls entry and press rto display the  
date and time of the call, the phone number (if  
available), and the caller’s name (if the number is  
already in your Contacts). Press /to display the  
following options:  
When you select contact information to view its details,  
you see the name or Direct Connect number of the  
person who sent the information and all the information  
in the item.  
Use Push To... to select Send My Info or Send Contact  
(Direct Connect or Calls Alerts only).  
If you receive contact information with the same name  
from the same phone more than once, only the most  
recently sent version appears in the Recent Calls list.  
Send Contact to send the contact information to  
another Direct Connect user.  
Delete to delete the entry.  
Viewing Recent Calls  
Delete All to delete all recent calls entries.  
Add Prepend to prepend a number to the contact  
To view the Recent Calls list:  
1. Press , or /> Recent Calls.  
2. Scroll through the list.  
Recent Calls View to select between List View or Picture  
View.  
To view the details of an item on the list:  
Call Alert Queue to view the call alert list.  
From the Recent Calls list, highlight an entry and  
press r.  
Call Setup to configure the call.  
95  
   
Call New Group to create a Group and place a Group  
3. Select [New Contact] to store the number in a new  
Contacts entry, or select an entry to store the  
number to an existing entry.  
Connect call. (Direct Connect or Call Alerts only..  
Press Create (left softkey) to begin a message to the  
highlighted entry.  
Tip  
Storing My Info or contact information from another  
phone to a Contacts entry that has a name assigned  
to it does not change the name of the Contacts  
entry.  
Note  
You can also view the next Recent Calls entry by  
pressing the navigation key right or view the previous  
entry by pressing the navigation key left.  
4. If the item is a call, you must assign a Contacts  
type to the number:  
Saving Items From Recent Calls  
With the Contacts type field highlighted, scroll left  
or right to display a Contacts type.  
1. From Recent Calls, highlight or select an item.  
5. To add more information to the entry (optional),  
follow the applicable instructions in “Creating  
2. Press Save (left softkey).  
– or –  
If Save is not one of your options, press /and  
then select Save or Update Contacts.  
6. Press Save (left softkey).  
If the item you are storing is a call, Save does not  
appear if the number is already stored in Contacts.  
Tip  
96  
   
Deleting Items From Recent Calls  
Prepending a Number From Recent  
Calls  
To delete an item from the Recent Calls list:  
1. From Recent Calls, highlight or select an item.  
2. Press /> Delete.  
If you need to make a call from the Recent Calls List  
and you are outside your local area code, you can add  
the appropriate prefix by prepending the number.  
3. Press ror press Yes (left softkey) to confirm.  
To delete all items on the Recent calls list:  
1. Press /> Recent Calls.  
1. Highlight or select a Recent Calls entry and press  
/> Add Prepend.  
2. Enter the prefix and press , to call the number.  
2. Press /> Delete All.  
3. Press Yes (left softkey) to confirm. Press No (right  
softkey) to cancel.  
97  
         
About Contacts  
8. Contacts  
Contacts stores up to 1200 numbers or addresses.  
Each Contacts entry can store several numbers or  
addresses.  
Information stored in Contacts is saved on your  
SIM card.  
A Contacts entry contains:  
A name — A name is required if you are storing more  
than one number or address to the entry; otherwise,  
it is optional. Typically, this is the name of the person  
whose contact information is stored in the entry.  
A ring tone — You can assign a ring tone to each  
entry. This is the sound your phone makes when you  
receive phone calls or call alerts from any of the  
numbers stored in the entry.  
A Contacts type — Each number or address stored  
must be assigned a Contacts type. (See Types of  
98  
       
Types of Contacts  
Creating Contacts Entries  
Each number or address stored must be assigned a  
Contacts type:  
Each Contacts entry can store up to 10 numbers or  
addresses, and an entry’s name can contain 20  
characters.  
Mobile  
DC  
phone number  
Direct Connect number  
phone number  
phone number  
phone number  
email address  
phone number  
phone number  
Talkgroup number  
Group  
A
ICE – In Case of Emergency  
0
Tip  
To make it easier for emergency personnel to identify  
important contacts, you can list your local  
emergency contacts under “ICE” in your phone’s  
Contacts list. For example, if your mother is your  
primary emergency contact, list her as “ICE–Mom” in  
your Contacts list. To list more than one emergency  
contact, use “ICE1–___,” “ICE2–___,” etc.  
Work1  
Work2  
Home  
Email  
Fax  
i
j
k
l
n
o
r
A number or address and a Contacts type are required  
for all Contacts entries. Other information is optional.  
You may enter the information in any order by scrolling  
through the entry details.  
Pager  
Talkgroup  
Group  
IP  
t
After you have entered the number or address,  
Contacts type, and any other optional information,  
press Save (left softkey) to save the entry to Contacts.  
IP address  
q
Other  
phone number  
p
To cancel a Contacts entry at any time press Cancel  
(right softkey) and then press Yes (left softkey) to return  
99  
           
to the Contacts list or press . to return to standby  
mode.  
Connect numbers, be sure to include the  
asterisks (*).  
To create a Contacts entry:  
1. Press /> Contacts > [New Contact].  
When you are finished, press r.  
2. To assign a name to the entry:  
Select Name. Enter the name and press r.  
6. To assign more options to the number, including  
Speed # and Voice Name, select [Options] and  
proceed to steps 7-9. Otherwise, skip to step 10.  
3. To assign a ring tone or picture to the name  
(optional):  
7. The default Speed Dial number assigned to a  
phone number is displayed in the Speed # field.  
This is always the next available Speed Dial  
location. To assign the phone number to a different  
Speed Dial location:  
Select Ring Tone/Picture, select a ring tone or  
picture, and then press Back (right softkey).  
4. To assign a Contacts type to the number or  
address being stored:  
With the Speed # field highlighted, press r.  
Highlight the Contacts type field.  
Press Delete (right softkey) to delete the current  
Speed Dial number.  
Scroll left or right to select a Contacts type (Mobile,  
DC, Work1, Work2, Home, Email, Fax, Pager, Talkgroup,  
Group, IP or Other).  
Enter the new Speed Dial number and press r.  
8. To create a voice name for a number, select Voice  
Name. Follow the prompts to record a name. Speak  
clearly into the microphone.  
5. To store a number or address:  
Select the # field (or ID for an email address, or IP  
for an IP address).  
9. When you are finished, press Back (right softkey).  
Enter the number or address. For phone  
numbers, use the ten-digit format. For Direct  
100  
     
10. To add more numbers or addresses to the entry:  
2. Press /> Store Number.  
Scroll past the information you already entered.  
3. Select [New Contact] to store the number to a new  
entry, or select an entry to store it to an existing  
entry.  
Enter the additional information for the entry using  
steps 2–9. You must assign a name to the entry, if  
you have not already.  
4. With the Contacts type field highlighted, scroll left  
or right to select a Contacts type.  
11. Press Save (left softkey).  
5. To add more information to the entry, follow the  
Creating Pauses and Waits  
When storing a number, you can program your phone  
to pause or wait between digits while dialing. A pause  
makes your phone pause for three seconds before  
dialing further. A wait makes your phone wait for your  
response before dialing further.  
6. Press Save (left softkey).  
Viewing Contacts  
This feature is useful when using voicemail or other  
automated phone systems that require you to dial a  
phone number and then enter an access number.  
1. Press /> Contacts and then either highlight an  
entry, enter the first letter of a name, or press  
Search (left softkey), and enter a name. (Your  
phone finds the name you entered or the nearest  
match.)  
For details on using pauses and waits, see “Phone  
2. If an entry has more than one number or address  
stored, <> surrounds the Contacts type icon. Scroll  
left or right to view the icon for each number stored  
in the entry.  
Storing Numbers Faster  
To store numbers to Contacts from standby mode:  
1. Enter a phone number or Direct Connect number.  
101  
       
3. Press rto display the entry, and then scroll up or  
3. Highlight the number type field above an open  
number and press the navigation key right or left to  
select a number type.  
down to view all information stored for the entry.  
To display the next or previous entry, scroll right or  
left.  
Tip  
4. Scroll down to the open field, enter the new  
number or address and press r.  
Filtering Contacts Entries  
5. Press Save (left softkey) to save the new number.  
You can set Contacts to display only entries containing  
Direct Connect numbers, Groups, and Talkgroups.  
– or –  
To assign a speed dial number or Voice Name,  
select [Options] > Speed # or Voice Name. Complete  
the process, press Back (right softkey) and then  
press Save (left softkey) to save the entry.  
Press /> Contacts > /> Filter > Show DC. Select  
Show All to display all Contacts entries.  
Finding Speed Dial Numbers  
Editing Entries  
Press /> Contacts, select an entry and select a  
phone number. The speed dial number is listed  
directly under the contact phone number.  
1. Press /> Contacts and highlight an entry.  
2. Press Edit (left softkey) or /> Edit.  
Adding a Number to an Entry  
3. Follow the applicable instructions in “Creating  
Contacts Entries” on page 99 to edit the entry.  
1. Display a Contacts entry. (See “Viewing Contacts”  
2. Press Edit (left softkey) or /> Edit.  
102  
     
Deleting Entries  
Assigning Speed Dial Numbers  
1. Press /> Contacts and highlight an entry.  
2. Press /> Delete Contact.  
Your phone can store up to 1200 phone numbers in  
speed dial locations. (For details on how to make calls  
page 27.)  
3. Press ror press Yes (left softkey) to confirm.  
You can assign speed dial numbers when you add a  
new Contacts entry, when you add a new phone  
number to an existing entry, or when you edit an  
existing number.  
Deleting a Number or Address  
1. Press /> Contacts and highlight an entry.  
2. Scroll left or right to display the Contacts type to  
delete.  
To assign a speed dial number to a new phone number:  
3. Press /> Delete Number.  
1. Add a phone number to a new or to an existing  
4. Press rand Yes (left softkey) to confirm.  
If an entry contains only one number or address,  
deleting the number or address deletes the entry.  
Note  
2. Highlight [Options], press r, and then select  
Speed #.  
3. Enter an available speed dial number and  
press r.  
4. Press Back (right softkey) and then press Save (left  
softkey) to save the entry.  
103  
     
To assign a speed dial number to an existing phone  
number:  
Selecting a Ringer Type for an Entry  
1. Press /> Contacts and then highlight an entry.  
Assign a ringer type to a Contacts entry so you can  
identify the caller by the ringer type. (See “Ring Tones”  
2. Press Edit (left softkey) or /> Edit.  
3. Select [Options] below the number, and then select  
Speed #.  
1. Press /> Contacts and then highlight an entry.  
2. Press Edit (left softkey) or /> Edit.  
3. Select [Ringtone/Picture ] > Ringer.  
4. Enter an available speed dial number and  
press r.  
5. Press Back (right softkey) and then press Save (left  
softkey) to save the changes.  
4. Scroll through available ringers. (When you  
highlight a ringer type, a sample ringer will sound.)  
If you attempt to assign an already in-use speed dial  
location to a new phone number, a message will  
appear asking if you wish to overwrite the existing  
speed dial assignment. Press Yes (left softkey) to  
assign the location to the new phone number and  
delete the previous speed dial assignment.  
Note  
5. Press rto select a ringer.  
6. Press Back (right softkey) and then press Save  
(left softkey)to save the assigned ringer.  
104  
 
Assigning a Picture to an Entry  
Assign a picture to display when you receive a call  
from an entry.  
1. Press /> Contacts and then highlight an entry.  
2. Press Edit (left softkey) or /> Edit.  
3. Select [Ringtone/Picture ] > Picture.  
4. Scroll through available pictures and press rto  
select one. (Scroll left or right to browse pictures in  
the phone’s memory or on the memory card.)  
5. Press Back (right softkey) and then press Save  
(left softkey).  
105  
     
A Datebook event contains:  
A subject — A name or number you assign to the  
event.  
9. Tools  
A location — The location of the event. This can also  
be a phone number, Direct Connect number, or  
Talkgroup.  
A start time — The start time for the event. Default is  
the beginning of the day.  
A duration — The length of time the event lasts.  
A date — The date for the event. Default is the day  
highlighted when the event is created.  
A repeat — For recurring events.  
A reminder — A scheduled alert for events that  
include a start time.  
A ring tone for the reminder.  
A profile that your phone uses during the event.  
A Java application that starts when the event starts.  
Datebook  
Only subject and date are required to save an event.  
Datebook stores up to 250 events. You can store events  
over a thirteen month period — twelve months after and  
one month before the current date.  
Viewing Datebook  
Press /> Tools > Datebook.  
106  
       
You can view Datebook by the day, by the week, or by  
the month. You can also view the details of any event.  
To see more in day view:  
Scroll up and down using the navigation key.  
To highlight a day in month view:  
Enter the date using the keypad.  
To go to today’s date:  
While in Datebook, press /> Go To Today.  
In day view, brief information about each event for  
that day appears.  
In week view, events appear as markers  
corresponding to their times.  
In month view, days with events are marked.  
To view an event:  
To go to any date in Datebook:  
1. While in Datebook, press /> Go To Date.  
2. Select a date.  
1. Select the day the event occurs.  
2. Select the event.  
To change the current view:  
Creating Events  
While in Datebook, press /and select a view.  
Every Datebook event must have a subject and be  
stored to a date. Other information is optional.  
Day view is the default setting.  
Note  
After you have entered the information, press Done (left  
softkey) to store the event to Datebook.  
Navigating Datebook  
To scroll through Datebook:  
To create a Datebook event:  
Scroll left and right using the navigation key.  
– or –  
1. While in datebook, press New (left softkey).  
– or –  
In week view and month view, press *or #.  
In day view, select [New Event].  
107  
   
2. To assign a subject to the event, select Subject and:  
7. To make the event a recurring event:  
Enter the name or enter a phone number, Direct  
Select Repeat and then select a repeat cycle.  
Connect number, or Talkgroup number.  
If the event occurs more than once a week,  
select Multiple Day, and select the days.  
– or –  
Press Done (left softkey).  
Press Browse (left softkey) to choose from  
common event names.  
In the End field, select a date for the event to stop  
recurring.  
3. To assign a location to the event (optional), select  
Location and enter the location or enter a phone  
number, Direct Connect number, or Talkgroup  
number.  
8. To create a reminder for this event, select Reminder  
and then select a reminder time or select Custom to  
enter a reminder time.  
4. The start time automatically assigned to an event is  
the beginning of the day. To change the start time  
or assign no start time, select Start and then enter a  
start time or press No Time (left softkey).  
If an event has no start time, you cannot create a  
reminder for it.  
Note  
9. To set the ring tone for a reminder, select Ring Tone  
and then select a ring tone.  
5. To assign a duration, select Duration and select a  
duration from the list or select Custom and enter a  
duration.  
10. To assign a profile for your phone to use during  
the event, select Profile and then select a profile.  
(Your phone switches to this profile when the event  
starts and switches back to the previous profile  
when the event ends.)  
6. The date automatically assigned to an event is the  
date that was highlighted or selected when you  
began creating the event. To change the date of  
the event, select Date and then enter a date.  
11. To assign a Java application to start when the  
event starts, select App and then select an  
108  
application. (If you created a reminder for this  
event, your phone prompts you to start the Java  
application when you get the reminder.)  
5. To change more information, follow the applicable  
edit the event.  
12. Once you have entered all relevant information and  
6. Press Done (left softkey) to store the event.  
settings, press Done (left softkey).  
Deleting Events  
To cancel without saving:  
1. Select the day the event occurs.  
Press Cancel (right softkey).  
2. Select the event and press /> Delete.  
Editing Events  
3. If the event is not a recurring event, press ror  
press Yes (left softkey) to confirm.  
To change the details of an event:  
– or –  
1. Select the day the event occurs.  
2. Select the event and press Edit (left softkey).  
If the event is a recurring event, select This Event  
Only to delete only the event selected in step 2, or  
select Repeat Event to delete all occurrences of the  
event.  
3. Follow the applicable instructions in “Creating  
Events” on page 107 to edit the event.  
To copy an event to another date:  
Receiving Reminders  
1. Select the day the event occurs.  
2. Select the event and press /> Copy.  
3. Press Yes (left softkey) to confirm.  
4. Enter a date and press r.  
If you created a reminder for a Datebook event, when  
the reminder time occurs, your phone notifies you with  
text on the display and a reminder tone.  
109  
     
To view more details about the event:  
Press View (left softkey).  
To dismiss the reminder:  
Press Dismiss (right softkey).  
Making Calls From Datebook  
To make a phone call:  
1. Highlight or select an event containing a phone  
number.  
2. Press , or press /> Call # in Event.  
For Events With Java Applications  
To make a Direct Connect call or Talkgroup call:  
If you assigned a Java application to start when the  
event starts, you can start the application when you get  
the reminder.  
1. Highlight or select an event containing a Direct  
Connect or Talk Group number.  
2. Press the DC button. (If you did not include a #  
before a Talkgroup, press /> Talkgroup, and then  
press the DC button.)  
Press /> Launch.  
Making Calls From Datebook and  
Datebook Reminders  
To send a Call Alert:  
1. Highlight or select an event containing a Direct  
If you stored a phone number, Direct Connect number,  
or Talkgroup number in the Subject or Location field of a  
Datebook event, you can call or send a Call Alert to that  
number from Datebook or from the reminder.  
Connect number.  
2. Press /> Alert # in Event, and then press the DC  
button.  
If you store the same type of number (phone number  
or DC/Talkgroup number) in both fields, the number in  
Subject takes precedence.  
Making Calls From Datebook Reminders  
To call a number:  
Press , or press /and then select Call # in Event.  
110  
 
To make Direct Connect calls or Talkgroup calls:  
Press the DC button.  
To send a Call Alert:  
Connect, Group ID (Talkgroup number), Carrier IP,  
IP1 Address and IP2 Address.  
If you request equipment-related transactions on  
your account, Nextel Customer Service may require  
you to provide specific information about your  
phone. Press /while in My Info to display a  
submenu that includes your phone's service status,  
unit information, and phone identification numbers  
including IMEI, SIM ID, and Serial Number (SN).  
Note  
Press /> Alert # in Event, and then press the DC  
button.  
Customizing Datebook Setup  
1. Select /> Tools > Datebook > /> Setup.  
Adding a Name to My Info  
2. Select an option and adjust the values.  
Options include Start View, Daily Begin, Delete After,  
Time Shift, Alert Timeout and Clock.  
1. Press /> Tools > My Info.  
2. Press Edit (left softkey) > Name.  
3. Enter a name and press r.  
My Info  
You can also edit the information in Line 1 and Line 2,  
but your changes are only temporary. The next time  
your phone registers on the network, your actual phone  
numbers appear again in My Info.  
My Info lets you view your phone number, Direct  
Connect number, and other phone information.  
Press /> Tools > My Info.  
You may need to select More to display My Info.  
Note  
Information displayed includes My Name (optional,  
you may enter it yourself), Line 1 Line 2, Direct  
111  
     
Suspending Applications  
Java Applications  
When you suspend an application, it does not stop  
running. It goes to the background so that you can run  
another application in the foreground.  
Installing Applications  
1. Press /> Games and Apps.  
To suspend an application:  
2. Select an application or suite of applications.  
Messages appear as the application installs.  
Press ..  
To view your suspended applications:  
Press /> Games and Apps > Suspended Apps.  
3. Press Done (left softkey).  
Running Applications  
1. Press /> Games and Apps.  
You can have up to three applications running at one  
time — one running in the foreground and two in the  
background.  
2. Select an application or suite of applications. If you  
have selected a suite of applications, select an  
application.  
Resuming Applications  
You can resume a suspended application at any time.  
This brings it to the foreground.  
If you do not hear the sounds associated with the  
Java application, select Settings > Volume and  
check the volumes of Speaker and Earpiece.  
Tip  
To resume a suspended application:  
1. Press /> Games and Apps > Suspended Apps.  
2. Select an application to resume.  
112  
               
To access a catalog of items available for purchase and  
download:  
Ending Applications  
To end an application:  
Press /> Multimedia > Downloads.  
Press the appropriate softkey to end or exit the  
You can also go to www.nextel.com and sign on to your  
account to find a wide selection of available Java  
applications and downloading instructions.  
application or press /> End.  
To end an application from the Suspended Apps Screen:  
1. Press Games and Apps > Suspended Apps.  
Deleting Applications  
2. Highlight an application and press End (left  
softkey).  
To delete an application:  
1. Press /> Games and Apps.  
To end all applications:  
2. Highlight an application and press /> Deinstall.  
3. Press ror Yes (left softkey) to confirm.  
1. Press /> Games and Apps > Suspended Apps >  
/> End All.  
2. Press ror press Yes (left softkey) to confirm.  
4. When your phone has finished deleting the  
application, press Done (left softkey).  
3. To end all applications without letting them exit,  
press EndNow (left softkey) and then press Finish  
(right softkey).  
To delete all Java applications:  
1. Press /> Games and Apps.  
Downloading Applications  
2. Highlight Java System and press /> Delete All.  
(You may need to press More [left softkey] to  
displayJava System.)  
To run more Java applications, you can download  
them into your phone.  
3. Press ror press Yes (left softkey) to confirm.  
113  
       
For count-based items, the number of credits (uses)  
left or an unlimited use notice.  
Digital Rights Management (DRM)  
The name of the item’s vendor.  
When you download multimedia content available  
online, such as Java applications, these items may be  
subject to DRM restrictions. DRM, or digital rights  
management, is a system that defines how copyrighted  
multimedia content can be distributed and used.  
To view the license of a DRM item:  
1. Go to the location that contains the item.  
2. Highlight the item and press /> License Info.  
DRM limits items to time-based or count-based usage  
settings. Time-based settings let you use the given item  
for a specified interval. Count-based settings let you  
use an item for a specified number of times after you  
download it or for unlimited use.  
Renewing DRM Licenses  
Java application data is stored in your phone using  
Note  
the same memory space used to store messages,  
voice records, pictures, ring tones, and wallpaper  
images. Deleting some of these other items frees  
memory for Java applications.  
Managing Items  
1. Go to the location on your phone that contains the  
Depending on how the third-party vendor has set rights  
for the given DRM item, you may be unable to perform  
some of the following tasks.  
item.  
2. Highlight a DRM item and press Renew (left  
softkey) or press /> Renew.  
Viewing License Information  
3. Select the link to the page where you purchased  
the item and then follow the vendor’s instructions  
for purchasing an additional license.  
You can check a DRM item’s license to view the  
following information:  
For time-based items, either the date and time the  
item expires, or the number of days left.  
114  
             
Deleting Items  
GPS Enabled  
If you delete a DRM item that you purchased from  
Nextel from your phone, you will have to purchase it  
again to download it.  
Your phone’s GPS Enabled feature uses information  
from Global Positioning System (GPS) satellites orbiting  
the Earth to determine the approximate geographical  
location of your phone. The availability and accuracy of  
this location information (and the amount of time that it  
takes to calculate it) will vary depending on the  
You cannot delete items that are DRM locked.  
Note  
Under certain conditions, third-party vendors will let  
you download an item multiple times within a given  
time frame, even if you deleted the item. Please  
contact the third-party vendor of an item to learn  
more about the vendor’s download regulations.  
environment in which you are using the GPS feature.  
When you make a 911 emergency call, the GPS feature  
of your phone can help emergency personnel locate  
you if your phone has adequate access to GPS satellite  
signals and your emergency response center is  
equipped to process such information.  
1. Highlight a DRM item and press /> Delete.  
2. If prompted, press Yes (left softkey).  
About Expired Items  
You can also use the GPS feature to view your  
approximate location. Location information appears on  
the phone’s display.  
Most items will continue to display on your phone until  
you delete them. You can also choose to renew the  
license for an expired item.  
Java applications loaded on your phone can also  
request your location. If your phone is connected to a  
laptop computer or similar device, software running on  
that device can request your location. To protect your  
privacy, you can control whether these requests are  
115  
       
determine the approximate location. This time will  
increase where there is reduced access to satellite  
signals. When your approximate location is  
determined, it is made available to the appropriate  
emergency response center.  
IMPORTANT: Things to Keep in Mind  
If you are using the GPS feature of your phone while  
driving, please give full attention to driving and to the  
road.  
Where adequate signals from multiple satellites are not  
available (usually because your GPS antenna cannot  
establish a view of a wide area of open sky, such as in  
underground locations, inside or between buildings, or  
in dense tree cover), the GPS feature of your phone  
WILL NOT WORK.  
In some cases, your local 911 emergency response  
center may not be equipped to receive GPS location  
information. For this reason, and because the GPS  
location information reported is only approximate or  
may not be available in your location, always report  
your location to the 911 operator you speak to when  
making an emergency call, if able, just as you would  
when using a phone without GPS capabilities.  
Walking or driving very slowly may also substantially  
reduce GPS performance.  
If you are concerned about whether your local 911  
emergency response center is equipped to receive  
GPS location information, contact your local  
authorities.  
Note  
Making an Emergency Call  
Dial 911 and press , to be connected to an  
emergency response center. If you are on an active  
call, you must end it before calling 911.  
Viewing Your Approximate Location  
When you make an emergency 911 call, the GPS  
feature of your phone begins to calculate your  
approximate location. Even where your phone has  
good access to sufficient GPS satellite signals and  
network assist data, it may take 30 seconds or more to  
Press /> Tools > GPS > Position.  
This displays the following information about the last  
time your location was calculated:  
116  
       
The time (as Greenwich Mean Time) and date that  
the location was last calculated.  
Enhancing GPS Performance  
Sometimes the GPS feature of your phone may be  
unable to complete a location calculation successfully.  
The approximate location, expressed as latitude and  
longitude.  
To improve accuracy and increase your chances of a  
successful calculation, do the following while your  
phone is determining your approximate location:  
The estimated accuracy of the calculated location.  
The number of satellites used to calculate the  
location. In general, more satellites make for better  
accuracy.  
Stay in the open. The GPS feature works best where  
there is nothing between your phone and a large  
amount of open sky. If possible, go outside, away  
from tall buildings and foliage.  
To calculate your location again:  
Press Refresh (left softkey).  
Hold your phone to enhance reception. Signals from GPS  
satellites are transmitted to your GPS antenna, which  
is in your phone antenna. Hold your phone away  
from your body, giving the antenna clear access to  
satellite signals. Do not cover the antenna area with  
your fingers or anything else.  
It may take your phone several minutes to complete the  
process of determining your location, during which the  
phone displays “Scanning For Satellites.”  
The Position screen displays the updated information.  
To cancel a location calculation before it is completed:  
Stand still. If possible, stand still until your phone is  
finished determining your location. Moving your  
phone at a walking pace while your phone is  
calculating your approximate location may  
substantially decrease GPS performance.  
Press Cancel (right softkey) to return to the Position  
screen or press . to return to standby mode.  
Each time approximate location of your phone is  
calculated, the latest location information is stored in  
your phone. You will see this information the next time  
you view the Position screen.  
In a car. When using the GPS Enabled feature in a car,  
position your phone so that the GPS antenna has  
117  
   
good access to GPS signals through the car’s  
windows. Typically, the GPS antenna has best access  
to GPS signals in a car when placed near a window.  
running the map software, which displays your location  
on a map. Your phone provides an updated location  
every second and the map software displays your  
changing location on its map.  
Although moving your phone at a walking pace  
decreases GPS performance, moving it at the speed  
of a moving car does not.  
Note  
more details on obtaining good location information.  
Because your phone is continuously determining  
Stay in network coverage. The network will provide your  
phone with information that helps determine your  
location more quickly and accurately.  
Note  
your location, using the GPS feature of your phone  
with map software uses the phone’s battery power  
quickly.  
Using GPS With Map Software  
To connect your phone to your laptop or other device:  
You can use the GPS feature of your phone to provide  
approximate location data to a laptop computer or  
similar device that is running interactive map software  
such as that made by DeLorme or Microsoft. This way,  
if your phone has good access to GPS signals, your  
approximate position on a map can be made available  
as you travel in a vehicle.  
1. Pull open the connector cover.  
2. With the phone’s display facing up, insert a  
micro-USB data cable into the charger connector.  
To do this, connect your phone to your laptop (or other  
device) with a data cable and set your phone to  
provides your approximate location to the device  
118  
   
3. Insert the data plug into the COM port of your  
Each time you power your phone on, NMEA OUT is  
automatically set to Off.  
laptop or other device.  
Make sure no other application is using the COM port  
selected.  
Memo Feature  
Make sure the COM port settings of your laptop or  
other device are set to the following:  
Memo lets you store a number, make a call to that  
number, and save it to Contacts.  
Bits per second: 4800  
Data bits: 8  
To create a memo:  
Parity: None  
1. Press /> Tools > Memo.  
2. Enter a number and press r.  
To view the memo later:  
Stop bits: 1  
Flow control: Hardware  
To set your phone to send location information to your  
laptop or other device:  
Press /> Tools > Memo.  
To delete the memo:  
1. Press /> Tools > GPS > Interface.  
1. Press /> Tools > Memo.  
2. Set NMEA OUT to USB or Bluetooth.  
2. Press and hold Delete (left softkey) and then  
Your phone is now sending location data to your  
laptop or other device.  
press r.  
To edit the memo:  
To stop sending location data to your laptop or other device:  
1. Press /> Tools > Memo.  
Set NMEA OUT to Off.  
119  
         
2. Press and hold Delete (left softkey) to delete the  
number.  
6. Press Save (left softkey).  
Voice Records  
3. Enter the new number and press r.  
To make a call to the memo number:  
1. Press /> Tools > Memo.  
A voice record is a recording you make with your  
phone and can play back. You can record notes to  
yourself or phone calls.  
2. To make a phone call, press ,. To make a Direct  
Connect call, press the DC button.  
Your phone can store up to 20 voice records.  
To store the memo number to Contacts:  
1. Press /> Tools > Memo.  
Creating Voice Records  
1. Press /> Multimedia > VoiceRecord >  
[New VoiceRec].  
2. Press /> Store to Contacts.  
3. To store the number as a new entry, select  
2. Recite a message into the microphone.  
3. When you are finished recording, press r.  
To record a phone call:  
[New Contact].  
– or –  
To store the number to an existing entry, select the  
entry.  
1. While on an active call, press /> Record.  
2. When you are finished recording, press r.  
4. With the Contacts type field highlighted, scroll left  
or right to display a Contacts type for the number.  
Recording of phone calls is subject to applicable  
laws regarding privacy and recording of phone  
conversations.  
Note  
5. To add more information to the entry, follow the  
applicable instructions in “Creating Contacts  
120  
         
3. Press ror Yes (left softkey) to confirm.  
To delete all unlocked voice records:  
Playing Voice Records  
1. Press /> Multimedia > VoiceRecord.  
1. Press /> Multimedia > VoiceRecord.  
2. Highlight a record and press /> Delete All.  
3. Press ror Yes (left softkey) to confirm.  
2. Highlight a voice record and press r.  
3. To stop the voice record while it is playing,  
press r.  
To fast forward, scroll right. To rewind, scroll left. To  
pause or resume, press any number key.  
Tip  
Locking Voice Records  
When you lock a voice record, it cannot be deleted  
until you unlock it.  
Labeling Voice Records  
When you create a voice record, it is labeled with the  
time and date it was recorded. You can rename it with  
a custom label.  
1. Press /> Multimedia > VoiceRecord.  
2. Highlight a record and press /> Lock to lock it.  
Press /> UnLock to unlock a message.  
1. Press /> VoiceRecord.  
When a voice record is locked, this icon Xappears  
next to it.  
2. Highlight a record and press Label (left softkey).  
3. Enter a label and press r.  
Managing Memory  
Deleting Voice Records  
To view the amount of memory available for voice records:  
To delete an unlocked voice record:  
1. Press /> Multimedia > VoiceRecord.  
1. Press /> Multimedia > VoiceRecord.  
2. Highlight a record and press /> Delete.  
2. With [New VoiceRec] highlighted, press Memory (left  
softkey).  
121  
         
To view or reset a timer:  
Call Timers  
1. Press /> Tools > Call Timers.  
2. Select a timer and press r.  
Call timers measure the duration of your phone calls,  
Direct Connect, or Group Connect calls, and the  
number of kilobytes sent and received by your phone:  
To reset the timer, press r (left softkey). Press  
ror press Yes (left softkey) to confirm.  
Last Call — displays the duration of your most recent  
phone call.  
The values displayed by Call Timers should not be  
used for billing. Call times are estimates only.  
Note  
Phone Reset — keeps a running total of your phone  
call minutes, until you reset it.  
Phone Lifetime — displays the total minutes of all your  
phone calls.  
DC/GC Reset — keeps a running total of all of your  
Direct Connect and Group Connect call minutes,  
until you reset it  
DC/GC Lifetime — displays the total minutes of all your  
Direct Connect and Group Connect calls.  
Kbytes Reset — keeps a running total of the number of  
kilobytes sent and received by your phone, until you  
reset it.  
122  
   
Inserting the microSD Card  
1. Remove the battery cover. (See “Installing the  
10. microSD Card  
2. Open the memory card slot cover, and slide in the  
memory card until it clicks into place.  
Using a microSD Card With Your  
Phone  
Using the microSD Card Slot  
Your phone is equipped with a microSD (Secure  
Digital) memory card slot to expand the phone’s  
available memory space. It allows you to store images,  
videos, music, and voice data in your phone.  
123  
       
4. Your phone may prompt you to use the memory  
card to store new media items, go to Music Player,  
go to the Camera, go to the Media Center, or do  
nothing. If you select [Do Nothing], you will return to  
standby mode. Respond to the prompt now.  
Be sure to use only recommended microSD cards.  
Using non-recommended microSD cards could  
cause data loss and damage your phone. Your  
handset can be used with Transflash or microSD  
memory cards.  
Note  
3. Close the memory card slot cover and replace the  
battery cover.  
Removing the microSD Card  
Do not remove the memory card until you select the  
Remove Card option under Settings. Removing the  
memory card before selecting the Remove Card option  
could result in loss of data.  
1. Press /> Settings > Memory Card > Remove Card.  
2. Once the handset confirms that it is safe to remove  
the microSD card, press OK (left softkey).  
3. Remove the battery cover and open the memory  
card slot cover.  
124  
 
4. Grasp the raised edge of the microSD card and  
Using the microSD Adapter  
pull the card out.  
The supplied microSD adapter allows microSD cards  
to be used in SD-compatible devices such as digital  
cameras, printers, and computers. Before using, you  
will need to insert the microSD card into the microSD  
adapter.  
To insert the microSD card into the microSD adapter:  
With the label side of the microSD card facing up,  
insert the card into the supplied microSD adapter,  
and gently slide the card until it is fully inserted.  
The microSD card and its adapter can be easily  
damaged by improper operation. Please be careful  
when inserting, removing, or handling them.  
Note  
5. Close the memory card slot cover and replace the  
battery cover.  
125  
 
To remove the microSD card from the microSD adapter:  
Capacity displays the capacity of the memory card.  
Card Files displays the number of files in the card.  
Hold the front edge of the microSD card, and  
gently pull outward to remove it from the adapter.  
Setting Storage Options  
If your computer has an SD card slot or if you have  
an SD card adapter, you can use the microSD card  
and adapter to transfer files such as audio files,  
pictures, and videos directly between your computer  
and your microSD card.  
Tip  
You can set your phone to store pictures, videos,  
music, and audio recordings on an inserted microSD  
card instead of in the phone’s memory (when  
available).  
1. With the microSD card inserted, press / >  
When you insert the card into your computer, select  
Open folder to view files using Windows Explorer (or  
a similar option) and drag and drop files using the  
available folders.  
Settings > Memory Card > Store Media.  
2. To store pictures, videos, music, and audio  
recordings on the memory card, select  
Perfer On Card.  
microSD Settings  
Formatting the microSD Card  
Formatting a microSD card permanently removes all  
files stored on the card.  
Viewing Memory in the microSD Card  
1. With the microSD card inserted, press />  
Multimedia > Media Center > /> Memory Usage.  
1. With the microSD card inserted, press /> Settings  
> Memory Card.  
2. The following information will be displayed:  
Used displays the amount of used memory space.  
Free displays the amount of free memory space.  
2. Select Format Card and press r. (A warning will be  
displayed.)  
126  
     
3. If you are sure you wish to remove all the files from  
3. To view or play a file, select it and press ror the  
appropriate softkey.  
your microSD card, press Yes (left softkey).  
The formatting procedure erases all the data  
on the microSD card, after which the files  
CANNOT be retrieved. To prevent the loss of  
important data, please check the contents  
before you format the card.  
The Media Center only recognizes compatible files  
stored in the card’s AUDIO, VIDEO, and IMAGE  
folders.  
WARNING  
Note  
Connecting Your Phone to Your  
Computer  
microSD Folders  
Before using your phone’s mass storage capabilities,  
you need to prepare your phone’s data services to  
synchronize with your desktop or laptop computer.  
Once the phone is connected to the computer, you can  
transfer your data to or from the microSD card.  
Displaying Your microSD Folders  
All the files stored in the appropriate folders on the  
microSD card are accessible through the Media  
Center.  
1. With the microSD card inserted, press />  
Multimedia > Media Center.  
1. With the microSD card inserted, press />  
Settings > Connections > USB.  
2. Press the navigation key left or right to display a  
Card folder (All, Pictures, Audio, or Video) and  
press r.  
2. Highlight Memory Card Access and press r.  
To allow applications to access you phone,  
press /> Settings > Connections > USB >  
Application Access.  
Note  
127  
       
3. Connect your phone to your computer using a  
compatible USB cable. (Wait for the connection to  
be completed. When connected, the host  
DO NOT turn off or restart your computer, or put it  
into standby mode, while using a mass storage  
device. Doing so will result in loss or damage of data.  
computer will automatically detect your phone.)  
If you connect a mass storage device to a peripheral  
device, your device may not work properly.  
To remove the connection:  
When you have finished transferring data, click the  
USB device icon on your computer’s taskbar, and  
follow the onscreen instructions to safely unplug  
the USB cable.  
Important Connection Information  
No driver installation is required for Windows 2000/  
ME/XP/Vista users. If you use Windows 98/98SE, you  
have to download and install the USB Mass Storage  
Driver from the Nextel website at www.nextel.com.  
To avoid loss of data, DO NOT remove the USB  
cable, the microSD card, or the battery while files are  
being accessed or transferred.  
DO NOT use your computer to change or edit folder  
or file names on the microSD, and do not attempt to  
transfer large amounts of data from the computer to  
the microSD card. Doing so may cause the microSD  
card to fail.  
128  
 
2. Using the display screen as a viewfinder, aim the  
camera lens at your subject.  
11. Camera  
3. Press Capture (left softkey) orror until the shutter  
sounds.  
Press Send (left softkey) to send the picture in an  
MMS message, Discard (right softkey) to discard  
the picture and return to the camera, rto save  
the picture and return to camera, or press /for  
the following options:  
Send Picture vi... to send pictures to recent call  
or contact.  
Send Via... to send the picture via Direct Send  
(PTT), Bluetooth, or Messaging (MMS).  
Taking Pictures  
Save [OK] to save the picture.  
Set As Caller ID to assign the picture to a  
contact. Select a contact and press r.  
Taking pictures with your phone’s built-in camera is as  
simple as choosing a subject, pointing the lens, and  
pressing a button.  
Set As Wallpaper to use the picture as your  
phone’s wallpaper.  
1. With the slide open, press /> Multimedia > Camera  
to activate camera mode.  
Media Center to save the picture to the Media  
Center and open the Media Center.  
The camera is located on the back of the slide.You  
will be prompted to open the slide to activate the  
camera.  
Note  
Remove Card to enable the memory card  
removal.  
129  
       
Memory Usage to see the amount of used and  
Picture Quality to select the picture quality between  
available memory on your phone.  
Normal or Fine.  
Memory Card to access the memory card  
Picture Size to select the picture size.  
menu.  
White Balance to select a white balance setting.  
Exposure Control to adjust the exposure.  
Style to set the picture effect.  
Camera Setup to set the camera default settings  
for Ask for Name, Shutter Sound, Default Size,  
Default Quality and GPS Tag.  
Memory Usage to verify memory usage.  
Memory Card to access the memory card menu.  
Camera Setup to set the camera default settings.  
Camera Options  
With the phone in camera mode, press /to display  
additional camera options:  
Setting the Self Timer  
Media Center to go to the Media Center to review your  
saved pictures.  
1. From camera mode, press /> Self Timer.  
2. Highlight a delay length (10 seconds, 15 seconds or  
20 seconds) and press r.  
Record Video to switch to video mode. (See  
3. Press Capture (left softkey) or rwhen you are  
ready to start the timer. (The lower portion of the  
display screen displays the countdown time.)  
Zoom to zoom in on a subject. (See “Using the  
Remove Card to safely remove the memory card.  
4. Get ready. The camera will automatically capture  
the picture when the timer runs down.  
Self Timer to activate the camera’s timer. (See “Setting  
GPS Tag the option to turn GPS Tag on or off.  
130  
               
To cancel the self-timer after it has started:  
Press Cancel (right softkey).  
Default Quality: Highlight Normal orFine and  
press r.  
GPS Tag: If this option is On, pictures will be tagged  
the geographic location of where they were taken.  
Using the Zoom  
Depending on your resolution settings, you can adjust  
the zoom from 1x to 4x.  
Recording Videos  
To adjust the zoom:  
In addition to taking pictures, you can also record, view,  
and send videos with the phone’s video camera.  
1. While in camera mode, press /> Zoom.  
2. Select from 1X, 2X or 4X.  
To record a video:  
1. Press /> Multimedia > Camcorder to activate video  
mode. (Additional video options are available  
through the video mode Options menu. See  
information.)  
Camera Setup  
Set your camera’s resolution and default size in the  
Camera Setup menu.  
1. Press /> Multimedia > Camera > />  
Camera Setup.  
2. Using the display screen as a viewfinder, aim the  
lens at your subject.  
2. Select an option and press r.  
Ask for Name: Select On for the camera to prompt  
you to enter a new file name when saving a  
picture.  
3. Press Record (left softkey) or rto begin recording.  
4. Press ror Stop (left softkey) to stop recording.  
Shutter Sound: Select an option and press r.  
Default Size: Select a size and press r.  
131  
               
To return to camcorder mode to take another  
video, press rto save or Discard (right softkey) to  
delete the video.  
Remove Card to enable the memory card removal.  
Video Size to select the video size.  
Video Length to select the video length.  
5. Press /for more options:  
Review to play back the video.  
Send Via... to send the video via Bluetooth or  
Messaging (MMS).  
Short (for messages) restricts the lenght of the video  
to a size that can be sent via messaging.  
Maximum lets you take as long a video as  
available memory space allow.  
Save [OK] to save the video.  
Memory Usage to verify memory usage.  
Media Center to go to the Media Center to review  
your saved videos.  
Memory Card to access the memory card menu.  
Camera Setup to set the camcorder default settings.  
Remove Card to enable the memory card removal.  
Memory Usage to verify memory usage.  
Selecting Video Settings  
Camera Setup to set the camera default settings.  
1. From video mode, press /> Camera Setup.  
2. Select an option and press r:  
Video Mode Options  
Ask for Name: Select On for the camcorder to  
prompt you to enter a new file name when saving  
a video file.  
With the phone in video mode, press /to display  
additional options:  
Media Center to go to the Media Center to review your  
saved videos.  
Shutter Sound: Select an option and press r.  
Default Video Size: to set a video’s default size.  
Capture Picture to switch to picture mode.  
Zoom to zoom in on a subject.  
132  
     
Card Folder  
Storing Pictures and Videos  
You can save pictures and videos directly to the  
microSD card. Several pictures can be stored and  
managed in each folder on the microSD card,  
depending on its capacity.  
Your phone’s pictures, video, and audio recordings  
storage area is called the Media Center. There are two  
types of folders in the Media Center: Phone and Card.  
To review your pictures and videos on the microSD card:  
Setting Storage Options  
1. Press /> Multimedia > Media Center.  
1. Press /> Settings > Memory Card > Store Media.  
2. Use the navigation keys to select Card: All and view  
saved pictures and videos.  
2. Select On Phone or Prefer on Card.  
Phone Folder  
Phone Folder and Card Folder Options  
Your phone’s internal storage area is called the Phone  
folder. From the Phone folder, you can view all the  
pictures and videos you have stored there, send items  
(via Direct Send, Bluetooth, or messaging), delete files,  
and access additional options.  
When you are highlighting a picture or video file in the  
phone or microSD card folders, press /to display the  
following options:  
Delete to delete the selected file.  
Lock to lock the selected file.  
To review your stored pictures and videos in the phone:  
Rename to rename the selected file.  
Send Via... to send the file via Direct Send, Bluetooth,  
1. Press /> Multimedia > Media Center.  
or Messaging.  
2. Use the navigation keys to select Phone: All and  
view saved pictures and videos.  
Camera to activate Camera mode.  
Remove Card to enable the memory card removal.  
133  
 
Set As Caller ID to display the currently highlighted  
picture for incoming calls from a specific Contacts  
entry. Select an entry and press r.  
Set As Wallpaper to display the currently highlighted  
picture as a wallpaper. Select Internal Display, External  
Display, or Both and press r.  
Edit to display the following options (pictures only):  
Crop to crop the selected picture.  
Rotate/Flip to rotate or flip the selected picture.  
Color Adjustments to select a color setting for the  
picture.  
Copy To Card/Phone to copy the file from the current  
folder to the other.  
Resize to resize the picture.  
Borders to add a border to the picture.  
Stamps to add a stamp to the picture.  
Text to add text to the picture.  
Move To Card/Phone to move the file from the current  
folder to the other.  
Delete All to delete all files in the folder.  
Text Bubble to add a text bubble to the picture.  
Filter to select the media type to view from Phone: All,  
Phone: Pictures, Phone: Audio, Phone: Video, Card: All,  
Card: Pictures, Card: Audio, and Card: Video.  
Setup to Sort files (By Time or By Name), and to turn  
Remember Filter on or off.  
Set View to switch the display from Plain List View to  
Thumbnail List View.  
Memory Usage to verify memory usage.  
Memory Card to go to the memory card menu.  
134  
To turn Bluetooth on:  
1. Press />Tools > Bluetooth > Setup > Power.  
2. Select On and press rto enable Bluetooth.  
To turn Bluetooth off:  
12. Bluetooth  
1. Press /> Tools > Bluetooth > Setup > Power.  
2. Select Off and press rto disable Bluetooth.  
To turn discoverable mode on:  
Press /> Tools > Bluetooth > Setup >  
Find Me Duration.  
For the duration selected under Find Me Duration,  
the phone will be discoverable by other devices  
that are within range.  
Turning Bluetooth On and Off  
Bluetooth is a short-range communications technology  
that allows you to connect wirelessly to a number of  
Bluetooth devices, such as headsets and hands-free  
car kits, and Bluetooth-enabled handhelds, computers,  
printers, and wireless phones. The Bluetooth  
communication range is usually up to approximately  
30 feet. By default, your device’s Bluetooth feature is  
turned off. Turning Bluetooth on makes your phone  
“discoverable” by other in-range Bluetooth devices.  
Bluetooth Status Indicators  
The Bluetooth status indicators on your phone’s display  
screen shows your Bluetooth connection status at a  
glance:  
Status Indicator – Bluetooth is disabled (default status)  
B – Status indicator will blink when the phone is in  
discovery mode.  
135  
       
B – Status indicator will be solid when connected to a  
Bluetooth device.  
Connecting Bluetooth Devices  
Pairing and Connecting  
Bluetooth Menu  
1. Press /> Tools > Bluetooth > Audio Devices >  
[Look for Devices] to connect to a hands-free device.  
The Bluetooth menu allows you to set up many of the  
characteristics of your phone’s Bluetooth service.  
– or –  
1. Press /> Tools > Bluetooth.  
Press /> Tools > Bluetooth > Pair to Devices to pair  
with a device. (Your phone will display a list of  
discovered in-range Bluetooth devices.)  
2. Set your Bluetooth options.  
Select Audio Devices to discover and connect to  
2. Highlight a device and press r.  
hands-free devices.  
Select Pair to Devices to scan for and pair your  
phone to an available Bluetooth device.  
3. Follow the prompts, including entering a PIN if  
requested, and press rto complete the  
connection.  
Select Device History to link to devices that have  
been connected to your phone.  
Pairing uses a PIN to establish a trusted connection  
between your phone and another Bluetooth device.  
This PIN is stored for future connections.  
Select Setup to turn Bluetooth on and off, rename  
your phone for Bluetooth, and set the time for the  
Find Me command listed below.  
Select Find Me to make your phone discoverable  
to Bluetooth devices for a period of time.  
136  
     
To use Bluetooth during a call:  
1. While in a call, press /> Use Bluetooth.  
2. Select a device.  
Due to different specifications and features of other  
Bluetooth-compatible devices, display and  
operations may be different, and functions such as  
transfer or exchange may not be possible with all  
Bluetooth-compatible devices.  
Note  
Disconnecting From a Device  
Connecting to a Stored Device  
1. Press /> Tools > Bluetooth > Audio Devices.  
If you have previously connected to a device, the  
device will be stored on your phone so you can  
connect with it easily.  
2. Press Drop (left softkey) and then press Yes (left  
softkey).  
Pressing No (right softkey) when prompted exits the  
menu without disconnecting the device.  
1. Press /> Tools > Bluetooth > Audio Devices and  
then select a device.  
Note  
2. If prompted to bond with the device, press Yes (left  
softkey).  
Understanding Bluetooth Access Settings  
A Bluetooth device can have either Automatic or Ask  
security access. The first time a Bluetooth device  
connects to your Motorola Debut i856 phone, you must  
grant the device permission to connect. You can then  
change the access setting of the device to either  
Automatic or Ask.  
3. If prompted, enter the Bluetooth PIN and press Ok  
(left softkey). Your phone will connect to the device.  
Using Bluetooth During a Call  
During a call, you can connect with available Bluetooth  
devices.  
If you set a device to Automatic, that device can connect  
automatically to your phone when it is in range. If you  
set a device to Ask, that device must request  
If the Hands Free menu contains only one device,  
then your phone will automatically try to connect to  
that device.  
Note  
permission before it can connect to your phone.  
137  
Devices are automatically granted permission during  
the ten seconds after connecting.  
Sending Items via Bluetooth  
The default for hands-free devices, such as Bluetooth  
headsets, is Automatic.  
Sending Contacts, Datebook Events and  
Media Center Items  
Setting Device Details  
Bluetooth lets you send Contacts entries, Datebook  
events, and compatible Media Center items to  
connected devices.  
The device history stores a list of up to 20 devices that  
have connected with your phone.  
Press /> Tools > Bluetooth > Device History.  
Files sent or received may be up to10 MB.  
From the device history, highlight a device and press  
Edit (left softkey) to edit the device name and change  
the access settings. To delete a device, highlight it,  
press / > Delete, and then press Yes (left softkey).  
You can only connect your phone to one device at a  
time.  
Go to www.nextel.com and click on Accessories for  
a list of MotorolaDebut i856 phone Bluetooth-  
compatible devices.  
Note  
If you delete a device from device history, you will  
Note  
have to find the device to connect with it. (See  
Sending Contacts  
1. Press /> Contacts.  
2. Highlight a contact and press /> Send Via... >  
Bluetooth.  
3. Select a device or search for a device by selecting  
[Look for Devices].  
138  
   
4. If prompted, bond with the device. Your phone  
2. Highlight a file and press /> Send Via... >  
Bluetooth.  
connects to the device and transfers the contact.  
3. Select a device or search for a device by selecting  
Sending Datebook Events  
[Look for Devices].  
1. Press /> Tools > Datebook.  
4. If prompted, bond with the device. Your phone  
connects to the device and transfers the file.  
2. Highlight an event and press /> Send Via....  
For a repeating event, select This Event Only to send  
only this occurrence or Repeat Event to send all  
instances.  
Receiving Items  
You receive a prompt when your phone has an  
incoming transfer.  
3. Select Bluetooth.  
Press Accept (left softkey) to accept the transfer or  
press Reject (right softkey) to reject the transfer.  
4. Select a device or search for a device by selecting  
[Look for Devices].  
Media files transferred from a PC may be copied to  
your microSD card’s root directory and may not be  
accessible by your phone. To check the location,  
connect your phone to your computer as a USB  
mass storage device and move the files to the  
appropriate folders.  
5. If prompted, bond with the device. Your phone  
Note  
connects to the device and transfers the event.  
Sending Media Center Items  
You can only send audio files and pictures if they are  
not forward locked and if their DRM settings do not  
prevent you from sending them.  
1. Press /> Multimedia > Media Center.  
139  
   
Canceling Transfers  
Viewing and Storing Received Items  
You can cancel a transfer while in progress.  
After an incoming transfer is complete, your phone  
translates the item and it appears on the display.  
1. Press Cancel (right softkey).  
You can choose to either store or discard the item.  
Items are stored as follows:  
2. Press Yes (left softkey) to cancel, or press No (right  
softkey) to continue with the transfer.  
Contact entries are stored to Contacts.  
Pictures and audio files are stored to their folders and  
are accessible through the Media Center.  
Datebook events are stored to Datebook.  
To store an item, press Store (left softkey).  
To discard an item without saving it, press  
Discard (right softkey).  
140  
     
The following audio recordings can be accessed  
through the Media Center:  
Voice records created when your phone was not in  
a call.  
13. Multimedia  
Musical ringtones in the list of ringtones.  
Audio files saved from MMS messages.  
Audio files (songs, recordings, podcasts) you  
downloaded to your phone.  
Pictures and audio files accessible through the Media  
Center can be sent in MMS messages, subject to  
message size limitations. See “Creating and Sending  
Media Center  
Viewing the Media Center  
The Media Center provides convenient access to all  
supported multimedia files on your device or your  
memory card.  
1. Press /> Multimedia > Media Center.  
2. Scroll to view the items in the Media Center.  
The Media Center cannot read the Music and  
Podcast folder from the microSD card.  
Choosing Thumbnail View or List View  
1. Press /> Multimedia > Media Center > /> Set View.  
2. Select Thumbnail List View or Plain List View.  
Note  
All pictures stored in your phone’s memory can be  
accessed through the Media Center.  
141  
         
Filtering by Media Type  
Sorting by Time or Name  
Press /> Multimedia > Media Center > /> Filter  
and select a filtering option: Phone: All, Phone:  
Pictures, Phone: Audio, Phone: Video, Card: All, Card:  
Pictures, Card: Audio, or Card: Video  
1. Press /> Multimedia > Media Center > /> Setup >  
Sort.  
2. Select By Time to sort by the time items were  
created or By Name to sort alphabetically.  
Keeping the Last Filter Setting  
When you receive your phone, the Media Center is set  
to sort items by time.  
You can set the Media Center to show all items every  
time you access it or to keep the filtering setting you  
had when you last viewed it.  
Forward Locked Items  
Some items saved to the Media Center may be forward  
locked. Forward locked items are usually copyright  
protected, and they cannot be sent or shared.  
Press /> Multimedia > Media Center > /> Setup >  
Remember Filter > On.  
When you receive your phone, the Media Center is set  
to show all items every time you access it.  
You cannot remove forward locking from an item.  
When you view items in the Media Center, one of these  
icons appears next to each forward locked item:  
Accessing Items  
1. Press /> Multimedia > Media Center.  
Forward locked.  
u
2. Highlight an item and press rto select it.  
3. Scroll right or left to access additional items.  
Forward lock and locked.  
v
142  
   
When an item is locked, it cannot be deleted from the  
Locking an item has no effect on its forward locking.  
3. Delete the current name, enter a new name, and  
press r.  
Locking Items  
DRM Items  
When you lock an item in the Media Center, it cannot  
be deleted until you unlock it.  
Except for Java applications, which download to Java  
Apps, the default location for any DRM items that you  
download is the Media Center.  
1. Press /> Multimedia > Media Center.  
2. Highlight or select an item and then press />  
Lock or Unlock to lock or unlock the item.  
Depending on how a vendor has set rights for an item,  
the item may include the following status icons.  
Deleting Items  
The item is a DRM item.  
k
Deleting items from the Media Center means they can  
no longer be accessed anywhere in your phone,  
including the list of ringtones, the list of voice records,  
and Contacts.  
The DRM item has expired.  
l
All DRM items are forward locked. As with other items  
in the Media Center, you can lock DRM items. See  
Deleting an Item  
1. Press /> Multimedia > Media Center.  
Renaming Items  
2. Highlight or select an item and then press />  
Delete.  
1. Press /> Multimedia > Media Center.  
2. Highlight or select an item and then press />  
Rename.  
3. Press Yes (left softkey) to confirm.  
143  
         
Deleting All Items  
Pictures  
You can delete all unlocked items currently in view,  
depending on how Media Center filtering is set. See  
to show all types of Media Center items, all unlocked  
items are deleted.  
The Media Center lets you view pictures and send  
them in MMS messages, with Nextel Direct Send, or  
with Bluetooth. You can also assign them to Contacts  
entries or set them as your phone’s wallpaper.  
Viewing Pictures  
1. Press /> Multimedia > Media Center.  
2. Press /and then selectDelete All.  
3. Press Yes (left softkey) to confirm.  
To view a picture, highlight it from the list of items  
in the Media Center and press r.  
If your phone is set to show thumbnails, a thumbnail of  
each picture appears next to the picture in the list of  
items. If your phone is not set to show thumbnails, this  
icon aappears next to the picture.  
If you delete items you have purchased and  
Tip  
downloaded, including DRM items, you will usually  
have to repurchase the item if you decide you want it  
back. Certain DRM vendors may not charge you to  
download an item multiple times within a given time  
frame. Please contact the vendor for details.  
To see a larger or smaller view of the picture you are  
viewing:  
Press /> Zoom and select a setting.  
Viewing Memory Usage  
If the picture does not fit in the display, use the  
navigation key to view different parts of the picture.  
1. Press /> Multimedia > Media Center.  
2. Highlight or select any item in the Media Center.  
3. Press /> Memory Usage.  
To free memory, delete items.  
144  
     
2. Select a device or search for a device by selecting  
Sending Pictures in a Message  
[Look for Devices].  
1. Highlight or select a picture and then press Send  
(left softkey) or press /> Send Via... > Messaging.  
3. If prompted, bond with the device. Your phone  
connects to the device and transfers the picture.  
2. Create and send the message. (See “Creating and  
selected is automatically attached.  
Setting Pictures as Wallpaper  
Highlight or select a picture and press />  
Set As Wallpaper.  
Sending Pictures With Direct Send  
1. Highlight or select a picture and press />  
Send Via... > Direct Send.  
My Music  
2. Select A Contact or A Recent Call and select an  
My Music groups your audio files into folders and lists.  
When you select an audio file to play, My Music plays  
the file and then plays the other audio files grouped  
with it.  
available recipient.  
3. Press the DC button to send the picture.  
Sending Pictures With Bluetooth  
In addition to music, My Music plays podcasts that you  
have downloaded to your computer and then saved on  
your memory card.  
You must set up your phone to send items  
using Bluetooth before you can send a picture.  
If you receive calls or notifications while playing an  
audio file with My Music, the audio file pauses and a  
prompt asks you to accept or ignore the incoming call  
or alert.  
1. Highlight or select a picture and press />  
Send Via... > Bluetooth.  
145  
     
Songs — All audio files on the memory card (except  
podcasts), listed alphabetically by title.  
Accessing My Music  
1. Press the Music key ([) to launch the My Music  
player.  
Playlists — Folders and lists you have created. The  
default playlist is Favorites.  
2. Press the navigation key up or down to select your  
music.  
Albums — Songs grouped by album title.  
Artists — Songs grouped by alphabetically by artist  
and title.  
3. Use the lighted navigations keys (Pause/Play [X],  
Next/Fast Forward [*], Previous/Rewind [)]) to control  
My Music.  
Genres — Songs grouped by genre.  
Podcasts — Podcast episodes grouped alphabetically  
by program. Episodes are sorted by date.  
You can also access My Music through the main  
menu. Press / > Multimedia > My Music or press  
/ > Games and Apps > My Music.  
Note  
Other — Other songs group alphabetically.  
If there is not enough album, artist, or genre data  
associated with a file, it is grouped as “Unknown”.  
Exiting My Music  
To exit My Music, press Exit (right softkey). (If Exit is  
Naming Audio Files  
not an option, press Back [right softkey] until it is.)  
File names can include up to 255 characters, including  
the file format extension (for example, mp3). Only the  
first 32 characters will be displayed. If a file name is  
longer than 255 characters, it will not be visible on the  
player and cannot be played. In this case, you will need  
to rename the file and resave it to the memory card.  
How Audio Files Are Organized  
My Music groups audio files on the memory card into  
folders and lists. Unless the phone determines a file is  
a podcast, it treats all audio files as songs.  
When you access My Music, you see that the audio  
files are grouped into these folders:  
146  
     
[X] to play it, or highlight a folder and press Play  
(left softkey) or press [X] to play the first audio file  
in the folder.  
Playing Audio Files  
Audio File Formats: My Music does not support all  
Note  
audio file formats or bit rates/sampling rates.  
Supported extensions include .3ga, .3gp, .aac, .amr,  
.au, .awb, .imy, .m4a, .mid, .midi, .mmf, .mp3, .mp4,  
.mpga, .mxmf, .ra, .ram, .rm, .smf, .wav, .wma, .xmf,  
.xmf0, and .xmf1.  
Any time you are viewing a list of folders with My Music,  
you can highlight a folder and press Play (left softkey) or  
press [X] to start playing the contents of that folder or  
press rto view the contents of the folder.  
Any time you are viewing a list of audio files, you can  
highlight a file and press Play (left softkey) or [X] to play  
it.  
1. Press [.  
2. Highlight a folder.  
The Songs folder contains all the audio files, except  
podcasts, on the memory card in a single list.  
Tip  
Press Back (right softkey) to return to the previous view.  
Pause and Resume  
To quickly navigate through lists, enter the first letter  
of a file or folder to skip to the entries beginning with  
that letter.  
To pause a playing audio file, press Pause (left  
softkey), or press [X].  
To resume playing a paused audio file, press Play  
3. To play the first audio file in the folder, press Play  
(left softkey). (If the folder you scrolled to contains  
subfolders, this plays the first audio file in the first of  
these subfolders.)  
(left softkey) or press [X].  
Skip to Next and Skip to Previous  
To skip to the next audio file, press [*] (the right  
side of the navigation key).  
– or –  
Press rto view the contents of the folder. Then  
highlight a file and press Play (left softkey) or press  
147  
     
To skip to the previous audio file, press [)] (the left  
side of the navigation key).  
Playing a List and Using Repeat and Shuffle  
You can play audio files in a selected list in order  
(default), you can select the Repeat option to have a list  
or song repeat automatically, or you can select the  
Shuffle option to have the files play continuously in  
random order.  
Fast-Forward and Rewind  
To fast-forward a playing audio file, press and hold  
[*] (the right side of the navigation key).  
To rewind a playing audio file, press [)] (the left  
side of the navigation key).  
To set repeat:  
1. While viewing a list, viewing audio file details, or  
viewing visuals, press /> Setup.  
Adjusting the Volume  
To adjust the volume, use the volume button.  
2. Highlight Repeat and then press the navigation key  
right or left to select an option:  
Playing Music in the Background  
All to repeat the list from the beginning.  
One to repeat the current song.  
Off to turn repeat off.  
Your phone can continue to play music in the  
background while you are accessing other features.  
To play music in the background:  
3. Press Back (right softkey) to return to the previous  
screen.  
With music playing, press /> Hide Player.  
To set shuffle:  
The music player continues playing and the display  
returns to standby mode. To return to the music player,  
press Music (right softkey).  
1. While viewing a list, viewing audio file details, or  
viewing visuals, press /> Setup.  
148  
     
2. Highlight Shuffle and then press the navigation key  
2. Enter a name and press r.  
right or left to select On or Off.  
If you do not assign a name, the playlist is named  
Note  
3. Press Back (right softkey) to return to the previous  
“Playlist” followed by the number of unnamed  
playlists you have. For example, the first unnamed  
playlist you create will be named “Playlist-1”.  
screen.  
DRM Items  
3. Select [Add Songs]. (You will see a list of available  
audio files.)  
Some of the audio files on the memory card may be  
DRM (digital rights management) items. When a DRM  
items has expired, you can no longer play it.  
4. Select each audio file for the playlist. A checkmark  
appears next to each selected file.  
If you highlight an audio file that is expired and try to  
play it, a message saying you cannot play it appears. If  
you play a list containing an expired audio file, My  
Music skips over the expired item and no message is  
displayed.  
5. When you are finished selecting files, press Done  
(left softkey).  
6. Press Save (left softkey).  
Editing a Playlist  
Working With Playlists  
After you have created a playlist, you can change its  
name, add audio files, remove audio files, and change  
the order of the audio files.  
Playlists let you group audio files that you’d like to hear  
together. Adding or removing songs from playlists, or  
deleting entire playlists, does not copy, move, or delete  
files from your memory card.  
1. Press [ > Playlists.  
2. Highlight a playlist and press /> Edit Playlist.  
3. Make your changes and press Save (left softkey).  
Creating a Playlist  
1. Press [ > Playlists > [Create New] > Name.  
149  
       
3. Press Save (left softkey).  
Reordering a Playlist  
To remove all files from a playlist:  
You can change the order of the audio files on a  
playlist.  
1. Before you have saved a new playlist or while  
editing a playlist, press /> Remove All Songs.  
1. Before you have saved a new playlist or while  
editing a playlist, press /> Reorder Songs.  
2. Press ror Yes (left softkey) to confirm.  
2. Highlight a title and press Grab (left softkey).  
3. Add new songs to the playlist and then press Save  
(left softkey).  
3. Highlight a new location and press Insert (left  
softkey).  
Empty playlists cannot be saved.  
Note  
4. Repeat steps 2 and 3 for all the items you are  
moving.  
Deleting Playlists  
5. Press Done (right softkey) and then press Save (left  
To delete a playlist:  
softkey).  
1. Press [ > Playlists.  
Removing Files From Playlists  
2. Highlight a playlist and press /> Delete Playlist.  
3. Press Yes (left softkey) to confirm.  
To delete all playlists:  
You can remove some or all audio files from a playlist.  
To remove a file from a playlist:  
1. Before you have saved a new playlist or while  
editing a playlist, press /.  
1. Press [ > Playlists.  
2. Press /> Delete All Playlists.  
3. Press Yes (left softkey) to confirm.  
2. Highlight an audio file and press />  
Remove Song.  
150  
 
This deletes all playlists except Favorites.  
Podcasts  
Using the Favorites Playlist  
To access and play podcasts:  
The Favorites playlist is a permanent playlist. You can  
add, remove, and change the order of the files, but you  
cannot rename it or delete it.  
1. Press [ > Podcasts.  
2. Scroll to view individual podcast episodes or  
folders containing multiple episodes of the same  
program.  
You can add audio files to the Favorites playlist as you  
would any other playlist.  
3. Press rto view the podcast episodes within a  
folder or the details screen of an individual  
podcast episode.  
You can also add audio files to the Favorites playlist  
using the Add to Favorites shortcut.  
To add the current audio file to Favorites:  
4. To play a selected podcast, press Play (left softkey).  
While viewing a list, viewing the details of the audio  
file currently playing, or viewing visuals, press />  
Add to Favorites.  
Deleting Audio Files  
You can delete audio files from the memory card one  
at a time, by album, by artist, or by genre, or by deleting  
everything in the Songs, Albums, Artists, or Genres  
folders.  
To add any audio file to Favorites:  
1. Press [ > Songs.  
2. Highlight a file and press /> Add to Favorites.  
Deleting an Audio File  
1. Press [.  
2. Select the folder containing the audio file.  
151  
     
3. Highlight the audio file and press /> Delete Song  
Deleting All Podcasts  
or Delete Podcast.  
1. Press [ > Podcasts > /> Delete Podcasts.  
2. Press ror Yes (left softkey) to confirm.  
4. Press Yes (left softkey) to confirm.  
Deleting an Album, Artist, or Genre  
Setting Audio and Visual Options  
1. Press [.  
You can customize the sound of My Music by setting  
the equalizer. You can customize the look of My Music  
screen by choosing a theme or by viewing visuals  
while listening to an audio file.  
2. Select the folder containing the audio files: Albums,  
Artists, or Genres.  
3. Highlight an album, artist, or genre, and press />  
Delete Album, Delete Artist, or Delete Genre.  
Setting the Equalizer  
4. Press Yes (left softkey) to confirm.  
1. From anywhere in My Music, press /> Setup >  
Equalizer.  
Deleting All Audio Files  
2. Select a mode and press Back (right softkey).  
Deleting everything in the Songs, Albums, Artists, or  
Genres folder deletes all audio files from the memory  
card.  
Viewing Visuals  
To view visuals instead of song details:  
1. Press [ > Songs, Albums, Artists, or Genres.  
2. Press /> Delete Songs > /> All.  
1. While viewing the details of the audio file currently  
playing, press /> Setup > Visuals, and use the  
navigation key to select an option.  
3. Press ror Yes (left softkey) to confirm.  
2. Press Back (right softkey).  
152  
   
To view song details instead of visuals:  
Preview displays the highlighted image.  
Send Via Bluetooth lets you send image via Bluetooth.  
Rename lets you rename the image.  
1. While viewing visuals press /> Setup >  
Visuals > Off.  
Delete Current deletes the highlighted image.  
2. Press Back (right softkey).  
Delete Multiple lets you choose multiple images to  
delete at one time.  
My Images  
Switch to Phone/Card toggles between images stored  
on the phone or memory card.  
The My Images application lets you easily browse, edit  
and view a slideshow of images on your phone or  
memory card on your internal display, or browse, view  
a slideshow on the external display.  
Set as wallpaper sets the highlighted image as the  
phone’s wallpaper.  
Set As Caller ID sets the highlighted image as the caller  
ID for a contact.  
My Images Menu  
Viewing Images  
The My Images menu has many image management  
features. The following options are available for existing  
images by pressing /> Multimedia > My Images > /.  
1. Press /> Multimedia > My Images or press/>  
Games and Apps > My Images.  
Edit displays several options for editing your photos  
including: Crop, Rotate/Flip, Color Adjustment,  
Resize, Borders, Stamps, Text, and Text Bubble.  
2. Press /> Slideshow to view a show of all images  
in the current folder.  
3. Press the navigation key left or right to scroll  
through the images.  
Slideshow starts a slideshow containing images from  
the currently highlighted image.  
Save as New lets you save an image with a new name.  
153  
           
Editing Images  
Viewing Videos  
My Images has several options for editing your photos  
including: Crop, Rotate/Flip, Color Adjustments, Resize,  
Borders, Stamps, Text, and Text Bubble.  
From the My Videos display, highlight a video and  
press Pause/Play (X) to begin playback.  
My Videos will display the video in portrait mode  
by default.  
Press /> Multimedia > My Images > /> Edit and  
follow the prompts to edit the picture.  
To change the default to landscape mode press  
/> Full Screen.  
My Videos  
When viewing a video, use the Pause/Play (X)  
button to control the video playback. Press and  
hold the Next/Fast Forward (*) button to fast  
forward the video.  
The My Videos application lets you easily browse and  
view video files on your phone or memory card.  
Press and hold the Previous/Rewind ()) button to  
rewind the video.  
Press /> Multimedia > My Videos or press />  
Games and Apps > My Videos.  
My Videos Setup Menu  
Video File Formats: My Videos does not support all  
video file formats or resolutions and bit/frame rates.  
Supported extensions include .3gp, .asf, .mp4, .rm,  
.rmvb, .mpg, and .wmv.  
Note  
Press /> Multimedia > My Videos > /> Setup.  
The My Videos Setup Menu allows you to change  
settings for View, 3D Audio and Reverbs.  
154  
       
Safety and Warranty  
Information  
 
Failure to read and follow the information provided in this phone  
guide may result in serious bodily injury, death, or property  
damage.  
S1. Important Safety  
Information  
General Precautions  
There are several simple guidelines to operating your phone  
properly and maintaining safe, satisfactory service.  
To maximize performance, do not touch the bottom portion  
of your phone where the internal antenna is located while  
using the phone.  
Speak directly into the mouthpiece.  
Avoid exposing your phone and accessories to rain or liquid  
spills. If your phone does get wet, immediately turn the  
power off and remove the battery.  
Do not expose your phone to direct sunlight for extended  
periods of time (such as on the dashboard of a car).  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting,  
bending, or sitting on it.  
Any changes or modifications to your phone not expressly  
approved in this document could void your warranty for this  
equipment and void your authority to operate this  
equipment.  
For the best care of your phone, only authorized personnel  
should service your phone and accessories. Failure to do  
so may be dangerous and void your warranty.  
Note  
156  
       
where use is forbidden or when it may cause interference or  
danger.  
Maintaining Safe Use of and Access  
to Your Phone  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, RF signals from wireless  
phones may affect inadequately shielded electronic  
equipment.  
RF signals may affect improperly installed or inadequately  
shielded electronic operating systems or entertainment  
systems in motor vehicles. Check with the manufacturer or their  
representative to determine if these systems are adequately  
shielded from external RF signals. Also check with the  
manufacturer regarding any equipment that has been added to  
your vehicle.  
Do Not Rely on Your Phone for Emergency Calls  
Mobile phones operate using radio signals, which cannot  
guarantee connection in all conditions. Therefore you should  
never rely solely upon any mobile phone for essential  
communication (e.g., medical emergencies). Emergency calls  
may not be possible on all cellular networks or when certain  
network services or mobile phone features are in use. Check  
with your local service provider for details.  
Using Your Phone While Driving  
Consult the manufacturer of any personal medical devices,  
such as pacemakers and hearing aids, to determine if they are  
adequately shielded from external RF signals.  
Talking on your phone while driving (or operating the phone  
without a hands-free device) is prohibited in some jurisdictions.  
Laws vary as to specific restrictions. Remember that safety  
always comes first.  
Operational Precautions  
Responsible driving practices can be found in “Smart Practices  
While Driving” on page 170 and/or at the Motorola website:  
www.motorola.com/callsmart.  
Always turn off the phone in healthcare facilities, and  
request permission before using the phone near medical  
equipment.  
Note  
Purchase an optional hands-free accessory at your local  
Sprint Store, or call Nextel at 1-866-866-7509.  
Tip  
To assure optimal radio product performance and to be sure  
that human exposure to RF does not exceed the guidelines set  
forth in the relevant standards, always follow these instructions  
and precautions:  
Following Safety Guidelines  
To operate your phone safely and efficiently, always follow any  
special regulations in a given area. Turn your phone off in areas  
157  
   
neck, keep the device at least 2.5 centimeters (1 inch) from  
your body when transmitting.  
Phone Operation  
When placing or receiving a phone call, hold your radio  
product as you would a wireline telephone. Speak directly into  
the microphone.  
Approved Accessories  
For a list of approved Motorola accessories call 1-800-453-0920, or  
visit our website at www.motorola.com/phoneaccessories.  
Two-way Radio Operation  
Your radio product has been designed and tested to comply  
with national and international standards and guidelines  
regarding human exposure to RF electromagnetic energy,  
when operated in the two-way mode (at the face, or at the  
abdomen when using an audio accessory) at usage factors of  
up to 50% talk/50% listen.  
Transmit no more than the rated duty factor of 50% of the time.  
To transmit (talk), push the PTT button. To receive calls, release  
the PTT button. Transmitting 50% of the time or less, is  
important because this radio generates measurable RF energy  
only when transmitting (in terms of measuring for standards  
compliance).  
Turning Off Your Phone Before Flying  
Turn off your phone before boarding any aircraft. To prevent  
possible interference with aircraft systems, the U.S. Federal  
Aviation Administration (FAA) regulations require you to have  
permission from a crew member to use your phone while  
the plane is on the ground. To prevent any risk of interference,  
FCC regulations prohibit using your phone while the plane is in  
the air.  
Turning Off Your Phone in Dangerous Areas  
To avoid interfering with blasting operations, turn your phone  
off when in a blasting area or in other areas with signs  
indicating two-way radios should be turned off. Construction  
crews often use remote-control RF devices to set off explosives.  
When using your radio product as a traditional  
two-way radio, hold the radio product in a  
vertical position with the microphone one to  
two inches (2.5 to 5 cm) away from the lips.  
Turn your phone off when you’re in any area that has a  
potentially explosive atmosphere. Although it’s rare, your phone  
and accessories could generate sparks. Sparks can cause an  
explosion or fire, resulting in bodily injury or even death. These  
areas are often, but not always, clearly marked. They include:  
If you wear a radio product on your body when  
transmitting, always place the radio product in  
a Motorola approved clip, holder, holster, case  
or body harness. If you do not use a body-worn accessory  
supplied or approved by Motorola and are not using the radio  
product in the intended use positions along side the head in  
the phone mode or in front of the face in the two-way radio  
mode, or if you hang your device from a lanyard around your  
Fueling areas such as gas stations.  
Below deck on boats.  
Fuel or chemical transfer or storage facilities.  
158  
Areas where the air contains chemicals or particles such  
as grain, dust, or metal powders.  
Seizures/Blackouts  
Some people may be susceptible to epileptic seizures or  
blackouts when exposed to flashing lights, such as when  
playing video games. These may occur even if a person has  
never had a previous seizure or blackout.  
If you have experienced seizures or blackouts, or if you have a  
family history of such occurrences, please consult with your  
physician before playing video games or enabling a flashing-  
lights feature (if available) on your phone.  
Discontinue use and consult a physician if any of the following  
symptoms occur: convulsion, eye or muscle twitching, loss of  
awareness, involuntary movements, or disorientation. It is  
always a good idea to hold the screen away from your eyes,  
leave the lights on in the room, take a 15-minute break every  
hour, and stop use if you are very tired.  
Any other area where you would normally be advised to  
turn off your vehicle’s engine.  
Never transport or store flammable gas, flammable liquids,  
or explosives in the compartment of your vehicle that  
contains your phone or accessories.  
Note  
Keep Your Mobile Device and Its Accessories Away From  
Small Children  
These products are not toys and may be hazardous to children.  
For example:  
A choking hazard may exist for small, detachable parts.  
Improper use could result in loud sounds, possibly causing  
hearing injury.  
Caution About High Volume Usage  
Improperly handled batteries could overheat and cause a  
burn.  
Do not allow children to play with your phone as they could  
hurt themselves and others, damage the phone or make calls  
that increase your invoice.  
Exposure to loud noise from any source for  
WARNING  
extended periods of time may affect your hearing.  
The louder the volume sound level, the less time is  
required before your hearing could be affected.  
Glass Parts  
Some parts of your phone may be made of glass. This glass  
could break if the product is dropped on a hard surface or  
receives a substantial impact. If glass breaks, do not touch or  
attempt to remove. Stop using your phone until the glass is  
replaced by a qualified service center.  
To protect your hearing:  
Limit the amount of time you use headsets or headphones at  
high volume.  
Avoid turning up the volume to block out noisy surroundings.  
159  
Turn the volume down if you can’t hear people speaking  
near you.  
DON’Ts  
Don’t disassemble, crush, puncture, shred, or otherwise  
attempt to change the form of your battery.  
If you experience hearing discomfort, including the sensation of  
pressure or fullness in your ears, ringing in your ears, or  
muffled speech, you should stop listening to the device through  
your headset or headphones and have your hearing checked.  
For more information about hearing, see our website at  
direct.motorola.com/hellomoto/nss/AcousticSafety.asp (in  
English only).  
Don’t let the phone or battery come in contact with water.  
Water can get into the phone’s circuits, leading to corrosion.  
If the phone and/or battery get wet, have them checked by  
your carrier or contact Motorola, even if they appear to be  
working properly.  
Don’t allow the battery to touch metal objects. If metal objects,  
such as jewelry, stay in prolonged contact with the battery  
contact points, the battery could become very hot.  
Don’t place your battery near a heat source. Excessive heat  
can damage the phone or the battery. High temperatures  
can cause the battery to swell, leak, or malfunction.  
Therefore:  
Repetitive Motion  
When you repetitively perform actions such as pressing keys or  
entering finger-written characters, you may experience  
occasional discomfort in your hands, arms, shoulders, neck, or  
other parts of your body. If you continue to have discomfort  
during or after such use, stop use and see a physician.  
Do not dry a wet or damp battery with an appliance or  
heat source, such as a hair dryer or microwave oven.  
Avoid leaving your phone in your car in high  
temperatures.  
Battery Use and Safety  
DOs  
HANDLE AND STORE BATTERIES PROPERLY TO  
Important  
Do avoid dropping the battery or phone. Dropping these  
AVOID INJURY OR DAMAGE. Most battery issues  
arise from improper handling of batteries, and  
particularly from the continued use of damaged  
batteries.  
items, especially on a hard surface, can potentially cause  
damage.  
Do contact your service provider or Motorola if your phone or  
battery has been damaged from dropping or high  
temperatures.  
160  
     
Proper and Safe Battery Disposal and Recycling  
USE MOTOROLA ORIGINAL PRODUCTS FOR  
QUALITY ASSURANCE AND SAFEGUARDS. To  
aid consumers in identifying authentic Motorola  
batteries from non-original or counterfeit batteries  
(that may not have adequate safety protection),  
Motorola provides holograms on its batteries.  
Consumers should confirm that any battery they  
purchase has a “Motorola Original” hologram.  
Important  
Proper battery disposal is not only important for safety, it  
benefits the environment. Consumers may recycle their used  
batteries in many retail or service provider locations. Additional  
information on proper disposal and recycling may be found on  
the Web:  
www.motorola.com/recycling  
www.rbrc.org/call2recycle/ (in English only)  
Disposal of Lithium Ion (LiIon) Batteries: Promptly  
dispose of used batteries in accordance with local  
regulations. Contact your local recycling center or  
national recycling organizations for more information  
on how to dispose of batteries.  
Motorola recommends you always use Motorola-branded  
batteries and chargers. Motorola mobile devices are designed  
to work with Motorola batteries. If you see a message on your  
display such as Invalid Battery or Unable to Charge, take the  
following steps:  
Remove the battery and inspect it to confirm that it has a  
“Motorola Original” hologram;  
Do not handle a damaged or leaking Li-Ion battery as you can  
be burned.  
If there is no hologram, the battery is not a Motorola battery;  
If there is a hologram, replace the battery and retry charging it;  
If the message remains, contact a Motorola Authorized  
Service Center.  
Never dispose of batteries in a fire because they  
may explode.  
WARNING  
Special Note: Be sure to dispose of your battery properly. In  
some areas, the disposal of batteries in household or business  
trash may be prohibited.  
Motorola’s warranty does not cover damage to the  
phone caused by non-Motorola batteries and/or  
chargers.  
Important  
Protecting Your Battery  
The guidelines listed below help you get the most out of your  
battery’s performance.  
Use of a non-Motorola battery or charger may  
present a risk of fire, explosion, leakage, or other  
hazard.  
WARNING  
Recently there have been some public reports of wireless  
phone batteries overheating, catching fire, or exploding. It  
appears that many, if not all, of these reports involve  
161  
 
counterfeit or inexpensive, aftermarket-brand batteries with  
unknown or questionable manufacturing standards. Nextel is  
not aware of similar problems with Nextel phones resulting  
from the proper use of batteries and accessories approved  
by Nextel or the manufacturer of your phone. Use only  
Nextel-approved or manufacturer-approved batteries and  
accessories found at Sprint Stores or through your phone’s  
manufacturer, or call 1-866-866-7509 to order. They’re also  
available at www.nextel.com — click Accessories. Buying the  
right batteries and accessories is the best way to ensure  
they’re genuine and safe.  
Batteries and Chargers  
Your battery, charger, or portable radio may contain symbols,  
defined as follows:  
Symbol  
Definition  
032374o  
Important safety information follows.  
Do not dispose of your battery or  
phone in a fire.  
In order to avoid damage, charge the battery only in  
temperatures that range from 32° F to 113° F (0° C to 45° C).  
Don’t use the battery charger in direct sunlight or in high  
humidity areas, such as the bathroom.  
Never dispose of the battery by incineration.  
Keep the metal contacts on top of the battery clean.  
Don’t attempt to disassemble or short-circuit the battery.  
The battery may need recharging if it has not been used for  
a long period of time.  
Your battery or phone may require  
recycling in accordance with local  
laws. Contact your local regulatory  
authorities for more information.  
032375o  
Do not throw your battery or phone  
in the trash.  
It’s best to replace the battery when it no longer provides  
acceptable performance. It can be recharged hundreds of  
times before it needs replacing.  
Don’t store the battery in high temperature areas for long  
periods of time. It’s best to follow these storage rules:  
Your phone contains an internal  
lithium ion battery.  
Li Ion BATT  
032378o  
Do not let your battery, charger, or  
phone get wet.  
Less than one month:  
-4° F to 140° F (-20° C to 60° C)  
More than one month:  
-4° F to 113° F (-20° C to 45° C)  
Listening at full volume to music or  
voice through a headset may  
damage your hearing.  
162  
interference to hearing devices than unrated phones. (M4 is the  
better/higher of the two ratings.)  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and  
are likely to be more usable with a hearing device’s telecoil (“T  
Switch”or “Telephone Switch”) than unrated phones. (T4 is the  
better/higher of the two ratings. Note that not all hearing  
devices have telecoils in them.)  
Hearing aid devices may also be measured for immunity to  
interference noise from wireless phones and should have  
ratings similar to phones. Ask your hearing health care  
professional for the rating of your hearing aid. Add the rating of  
your hearing aid and your phone to determine probable  
usability:  
Using Your Phone With a Hearing  
Aid Device  
A number of Nextel phones have been tested for hearing aid  
device compatibility. When some wireless phones are used  
with certain hearing devices (including hearing aids and  
cochlear implants), users may detect a noise which can  
interfere with the effectiveness of the hearing device.  
Some hearing devices are more immune than others to this  
interference noise, and phones also vary in the amount of  
interference noise they may generate. ANSI standard C63.19  
was developed to provide a standardized means of measuring  
both wireless phone and hearing devices to determine usability  
rating categories for both.  
Ratings have been developed for mobile phones to assist  
hearing device users find phones that may be compatible with  
their hearing device. Not all phones have been rated for  
compatibility with hearing devices. Phones that have been  
rated have a label with the rating(s) located on the box, and are  
listed at www.motorola.com/accessibility.  
These ratings are not guarantees. Results will vary depending  
on the user’s hearing device and individual type and degree of  
hearing loss. If a hearing device is particularly vulnerable to  
interference noise; even a phone with a higher rating may still  
cause unacceptable noise levels in the hearing device. Trying  
out the phone with your hearing device is the best way to  
evaluate it for your personal needs.  
Any combined rating equal to or greater than six offers  
excellent use.  
Any combined rating equal to five is considered normal use.  
Any combined rating equal to four is considered usable.  
Thus, if you pair an M3 hearing aid with an M3 phone, you will  
have a combined rating of six for “excellent use.”This is  
synonymous for T ratings.  
Nextel further suggests you experiment with multiple phones  
(even those not labeled M3/T3 or M4/T4) while in the store to  
find the one that works best with your hearing aid device.  
Should you experience interference or find the quality of  
service unsatisfactory after purchasing your phone, promptly  
return it to the store within 30 days of purchase. With the Sprint  
30-day Risk-Free Guarantee, you may return the phone within  
30 days of purchase for a full refund. More information about  
hearing aid compatibility may be found at:  
M-Ratings: Phones rated M3 or M4 meet FCC requirements for  
hearing aid compatibility and are likely to generate less  
www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and  
www.accesswireless.org.  
163  
     
accordance with the national collection and recycling schemes  
operated by your local or regional authority. Alternatively, you  
may return unwanted mobile devices and electrical  
accessories to any Motorola Approved Service Center in your  
region. Details of Motorola approved national recycling  
schemes, and further information on Motorola recycling  
activities can be found at: www.motorola.com/recycling.  
Getting the Best Hearing Device  
Experience With Your Phone  
To further minimize interference:  
Set the phone’s display and keypad backlight settings to  
ensure the minimum time interval:  
1. Press /> Settings > Display/Info > Backlight > Timer or  
Java Timer.  
Disposal of your Mobile Device Packaging and User’s  
Guide  
2. Highlight the minimum time interval setting and press r.  
Position the phone so the internal antenna is farthest from  
your hearing aid.  
Move the phone around to find the point with least  
interference.  
Product packaging and user’s guides should only be disposed  
of in accordance with national collection and recycling  
requirements. Please contact your regional authorities for more  
details.  
Export Law Assurances  
Caring for the Environment by  
Recycling  
This product is controlled under the export regulations of the  
United States of America and Canada. The Governments of the  
United States of America and Canada may restrict the  
exportation or re-exportation of this product to certain  
destinations. For further information contact the U.S.  
Department of Commerce or the Canadian Department of  
Foreign Affairs and International Trade.  
This symbol on a Motorola product means the product  
should not be disposed of with household waste.  
Disposal of your Mobile Device and Accessories  
Please do not dispose of mobile devices or electrical  
accessories (such as chargers, headsets, or batteries) with  
your household waste. These items should be disposed of in  
164  
   
Operational Precautions  
California Perchlorate Label  
For optimal mobile device performance, and to be sure that  
human exposure to RF energy does not exceed the guidelines  
set forth in the relevant standards, always follow these  
instructions and precautions.  
Some mobile phones use an internal, permanent backup  
battery on the printed circuit board that may contain very small  
amounts of perchlorate. In such cases, California law requires  
the following label:  
Perchlorate Material – special handling may apply. See  
www.dtsc.ca.gov/hazardouswaste/perchlorate. There is no  
special handling required by consumers.  
Product Operation  
When placing or receiving a phone call, hold your mobile  
device just like you would a landline phone.  
If you wear the mobile device on your body, always place the  
mobile device in a Motorola-supplied or approved clip, holder,  
holster, case, or body harness. If you do not use a body-worn  
accessory supplied or approved by Motorola—or if you hang  
your mobile device from a lanyard around your neck—keep the  
mobile device and its antenna at least 2.5 centimeters (1 inch)  
from your body when transmitting.  
Using accessories not supplied or approved by Motorola may  
cause your mobile device to exceed RF energy exposure  
guidelines. For a list of Motorola-supplied or approved  
accessories, visit our website at: www.motorola.com.  
Radio Frequency (RF) Energy  
This section contains important information on the safe and  
efficient operation of your mobile device. Read this information  
before using your mobile device.  
Exposure to Radio Frequency (RF) Energy  
Your mobile device contains a transmitter and receiver. When it  
is ON, it receives and transmits RF energy. When you  
communicate with your mobile device, the system handling  
your call controls the power level at which your mobile device  
transmits.  
Your Motorola mobile device is designed to comply with local  
regulatory requirements in your country concerning exposure  
of human beings to RF energy.  
RF Energy Interference/Compatibility  
Nearly every electronic device is subject to RF energy  
interference from external sources if inadequately shielded,  
designed, or otherwise configured for RF energy compatibility.  
In some circumstances your mobile device may cause  
interference with other devices.  
Follow Instructions to Avoid Interference Problems  
Turn off your mobile device in any location where posted  
notices instruct you to do so.  
165  
       
In an aircraft, turn off your mobile device whenever instructed  
to do so by airline staff.  
If your mobile device offers an airplane mode or similar  
feature, consult airline staff about using it in flight.  
Responsible driving practices can be found in the “Smart Practices  
While Driving” section in this guide (or separate guide).  
Operational Warnings  
Obey all posted signs when using mobile devices in public areas.  
Implantable Medical Devices  
Potentially Explosive Atmospheres  
If you have an implantable medical device, such as a  
pacemaker or defibrillator, consult your physician before using  
this mobile device.  
Persons with implantable medical devices should observe the  
following precautions:  
Areas with potentially explosive atmospheres are often, but not  
always, posted and can include fueling areas, such as below  
decks on boats, fuel or chemical transfer or storage facilities, or  
areas where the air contains chemicals or particles, such as  
grain dust, or metal powders.  
When you are in such an area, turn off your mobile device, and  
do not remove, install, or charge batteries. In such areas,  
sparks can occur and cause an explosion or fire.  
ALWAYS keep the mobile device more than 20 centimeters  
(8 inches) from the implantable medical device when the  
mobile device is turned ON.  
DO NOT carry the mobile device in the breast pocket.  
Use the ear opposite the implantable medical device to  
minimize the potential for interference.  
Knowing Radio Frequency Safety  
The design of your phone complies with updated NCRP standards  
described below.  
Turn OFF the mobile device immediately if you have any  
reason to suspect that interference is taking place.  
Read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about  
using your mobile device with your implantable medical  
device, consult your healthcare provider.  
In 1991–92, the Institute of Electrical and Electronics Engineers  
(IEEE) and the American National Standards Institute (ANSI) joined  
in updating ANSI’s 1982 standard for safety levels with respect to  
human exposure to RF signals. More than 120 scientists, engineers  
and physicians from universities, government health agencies and  
industries developed this updated standard after reviewing the  
available body of research. In 1993, the Federal Communications  
Commission (FCC) adopted this updated standard in a regulation.  
In August 1996, the FCC adopted hybrid standard consisting of the  
existing ANSI/IEEE standard and the guidelines published by the  
National Council of Radiation Protection and Measurements  
(NCRP).  
Driving Precautions  
The use of wireless phones while driving may cause distraction.  
Discontinue a call if you can’t concentrate on driving.  
Additionally, the use of wireless devices and their accessories  
may be prohibited or restricted in certain areas. Always obey  
the laws and regulations on the use of these products.  
166  
Australian Communications Authority Radio  
communications (Electromagnetic Radiation - Human  
Exposure) Standard 2003.  
ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2,  
2002) “Regulation of the limitation of exposure to electrical,  
magnetic, and electromagnetic fields in the radio frequency  
range between 9 kHz and 300 GHz.” “Attachment to  
Resolution 303 from July 2, 2002.”  
Body-Worn Operation  
To maintain compliance with FCC RF exposure guidelines, if  
you wear a handset on your body, use the Motorola supplied or  
approved carrying case, holster or other body-worn accessory.  
If you do not use a body-worn accessory, ensure the antenna is  
at least 2.5 centimeters from your body when transmitting. Use  
of non-Motorola-approved accessories may violate FCC RF  
exposure guidelines.  
Your Motorola phone is designed to comply with local  
regulatory requirements in your country concerning exposure  
of human beings to RF energy.  
For more information about RF exposure, visit the FCC website  
at www.fcc.gov.  
Specific Absorption Rate  
Your Motorola Debut i856 model wireless phone meets the  
governmental requirements for exposure to radio waves.  
Your wireless phone is a radio transmitter and receiver. It is  
designed and manufactured to not exceed limits for exposure  
to radio frequency (RF) energy set by the Federal  
Portable Radio Product Operation and EME Exposure  
Communications Commission (FCC) of the U.S. Government  
and by the Canadian regulatory authorities. These limits are  
part of comprehensive guidelines and establish permitted  
levels of RF energy for the general population. The guidelines  
are based on standards that were developed by independent  
scientific organizations through periodic and thorough  
evaluation of scientific studies. The standards include a  
substantial safety margin designed for the safety of all persons,  
regardless of age or health, and to account for any variations in  
measurements.  
Your Motorola radio product is designed to comply with the  
following national and international standards and guidelines  
regarding exposure of human beings to radio frequency  
electromagnetic energy (EME):  
United States Federal Communications Commission, Code  
of Federal Regulations; 47 CFR part 2 sub-part J.  
American National Standards Institute (ANSI) / Institute of  
Electrical and Electronics Engineers (IEEE). C95. 1-1992.  
Institute of Electrical and Electronics Engineers (IEEE). C95.  
1-2005 Edition.1  
International Commission on Non-Ionizing Radiation  
Protection (ICNIRP) 1998.  
Ministry of Health (Canada). Safety Code 6. Limits of Human  
Exposure to Radio frequency Electromagnetic Fields in the  
Frequency Range from 3 kHz to 300 GHz, 1999.  
1.The information provided in this document supersedes the  
general safety information in user’s guides published prior to  
May 1, 2006.  
167  
The exposure standard for wireless mobile phones employs a  
unit of measurement known as the Specific Absorption Rate  
(SAR). The SAR limit set by the FCC and by the Canadian  
regulatory authorities is 1.6 watts per kilogram (W/kg),  
averaged over one gram of tissue. Tests for SAR are conducted  
using procedures accepted by the FCC and by Industry  
Canada with the phone transmitting at its highest certified  
power level in all tested frequencies. Although the SAR is  
determined at the highest certified power level, the actual SAR  
level of the phone while operating can be below the maximum  
value. This is because the phone is designed to operate at  
multiple power levels so as to use only the power required to  
reach the network. In general, the closer you are to a wireless  
base station, the lower the power output.  
Before a phone model is available for sale to the public in the  
U.S. and Canada, it must be tested and certified to the FCC  
and Industry Canada that it does not exceed the limit  
established by each government for safe exposure. The tests  
are performed in positions and locations (e.g., at the ear and  
worn on the body) submitted to the FCC and available for  
review by Industry Canada. The highest SAR value for this  
model phone when tested for use at the ear is 0.88 W/kg, and  
when worn on the body, as described in this user guide, is 1.15  
W/kg. Body-worn measurements can differ, depending upon  
available accessories and regulatory requirements. The SAR  
information includes the Motorola testing protocol, assessment  
procedure, and measurement uncertainty range for this  
product.  
the SAR value for later products; in all cases, products are  
designed to be within the guidelines.  
Additional information on SAR can be found on the Cellular  
Telecommunications & Internet Association (CTIA) website:  
www.phonefacts.net  
or the Canadian Wireless Telecommunications Association  
(CWTA) website: www.cwta.ca.  
Owner’s Record  
The model number, regulatory number, and serial number are  
located on a nameplate inside the battery compartment.  
Record the serial number in the space provided below. This will  
be helpful if you need to contact us about your phone in the  
future.  
Model: Motorola Debut i856  
Serial No.:  
Online Product Registration:  
http://www.motorola.com/us/productregistration  
Product registration is an important step toward enjoying your  
new Motorola product. Registration permits us to contact you  
for product or software updates and allows you to subscribe to  
updates on new products or special promotions. Registration is  
not required for warranty coverage. Please retain your original  
dated sales receipt, as you may need to provide it for warranty  
validation in the future.  
While there may be differences between the SAR levels of  
various phones and at various positions, they meet the  
governmental requirements for safe exposure. Please note that  
improvements to this product model could cause differences in  
Thank you for choosing a Motorola product.  
168  
   
modified, reverse-engineered, distributed, or reproduced in any  
manner to the extent allowed by law. Furthermore, the  
purchase of the Motorola products shall not be deemed to  
grant either directly or by implication, estoppel, or otherwise,  
any license under the copyrights, patents, or patent  
Patent and Trademark Information  
MOTOROLA, the Stylized M Logo and all other trademarks  
indicated as such herein are trademarks of Motorola, Inc.  
® Reg. U.S. Pat. & Tm. Off. © 2009 Motorola, Inc. All rights  
reserved.  
Microsoft and Microsoft Internet Explorer are registered  
trademarks of Microsoft Corporation.  
T9 is a trademark owned by Tegic Communications.  
T9® Text Input Patent and Trademark Information.  
This product is covered by U.S. Pat. 5,818,437, U.S. Pat.  
5,953,541, U.S. Pat. 6,011,554 and other patents pending.  
Java and all other Java-based marks are trademarks or  
registered trademarks of Sun Microsystems, Inc. in the U.S. and  
other countries.  
All other product names or services mentioned in this manual  
are the property of their respective trademark owners.  
applications of Motorola or any third party software provider,  
except for the normal, non-exclusive, royalty-free license to use  
that arises by operation of law in the sale of a product.  
Open Source Software Information  
For instructions on how to obtain a copy of any source code  
being made publicly available by Motorola related to software  
used in this Motorola mobile device you may send your request  
in writing to:  
MOTOROLA, INC.  
OSS Management  
600 North US Hwy 45  
Libertyville, IL 60048  
USA  
The Motorola website opensource.motorola.com also contains  
Software Copyright Notice  
information regarding Motorola’s use of open source.  
Motorola has created the opensource.motorola.com to serve as  
a portal for interaction with the software community-at-large.  
To view additional information regarding licenses,  
acknowledgments and required copyright notices for open  
source packages used in this Motorola mobile device, please  
press /> Games and Apps > Open Source Notices.  
The Motorola products described in this manual may include  
copyrighted Motorola and third party software stored in  
semiconductor memories or other media. Laws in the United  
States and other countries preserve for Motorola and third party  
software providers certain exclusive rights for copyrighted  
software, such as the exclusive rights to distribute or reproduce  
the copyrighted software. Accordingly, any copyrighted  
software contained in the Motorola products may not be  
169  
   
Privacy and Data Security  
Smart Practices While Driving  
Drive Safe, Call Smart SM  
Motorola understands that privacy and data security are  
important to everyone. Because some features of your phone  
may affect your privacy or data security, please follow these  
recommendations to enhance protection of your information:  
Check the laws and regulations on the use of mobile devices  
and their accessories in the areas where you drive. Always  
obey them. The use of these devices may be prohibited or  
restricted in certain areas. Contact www.motorola.com/callsmart  
for more information.  
Your mobile device lets you communicate by voice and data—  
almost anywhere, anytime, wherever wireless service is  
available and safe conditions allow. When driving a car, driving  
is your first responsibility. If you choose to use your mobile  
device while driving, remember the following tips:  
Monitor access: Keep your phone with you and do not leave  
it where others may have unmonitored access. Lock your  
device’s keypad where this feature is available.  
Keep software up to date: If Motorola or a software/  
application vendor releases a patch or software fix for your  
phone which updates the device’s security, install it as soon  
as possible.  
Erase before recycling: Delete personal information or data  
from your phone prior to disposing of it or turning it in for  
recycling. For step-by-step instructions on how to delete all  
personal information from your device, please contact your  
local service provider.  
Get to know your Motorola phone and its features such as  
speed dial and redial. If available, these features help you to  
place your call without taking your attention off the road.  
When available, use a hands-free device. If possible, add an  
additional layer of convenience to your phone with one of the  
many Motorola Original hands-free accessories available  
today.  
Understanding AGPS: In order to comply with emergency  
caller location requirements of the FCC, certain Motorola  
phones incorporate Assisted Global Positioning System  
(AGPS) technology. AGPS technology also can be used in  
non-emergency applications to track and monitor a user’s  
location, for example, to provide driving directions. Users  
who prefer not to permit such tracking and monitoring  
should avoid using such applications.  
Position your phone within easy reach. Be able to access  
your phone without removing your eyes from the road. If you  
receive an incoming call at an inconvenient time, if possible,  
let your voice mail answer it for you.  
Let the person you are speaking with know you are driving; if  
necessary, suspend the call in heavy traffic or hazardous  
weather conditions. Rain, sleet, snow, ice, and even heavy  
traffic can be hazardous.  
If you have further questions regarding how use of your phone  
may impact your privacy or data security, please contact  
Motorola.  
170  
   
Do not take notes or look up phone numbers while driving.  
Jotting down a “to do” list or going through your address  
book takes attention away from your primary responsibility,  
driving safely.  
Dial sensibly and assess the traffic; if possible, place calls  
when your car is not moving or before pulling into traffic. If  
you must make a call while moving, dial only a few numbers,  
check the road and your mirrors, then continue.  
Do not engage in stressful or emotional conversations that  
may be distracting. Make people you are talking with aware  
you are driving and suspend conversations that can divert  
your attention away from the road.  
Use your phone to call for help. Dial 911 or other local  
emergency number in the case of fire, traffic accident, or  
medical emergencies.*  
Use your phone to help others in emergencies. If you see an  
auto accident, crime in progress, or other serious emergency  
where lives are in danger, call 911 or other local emergency  
number, as you would want others to do for you.*  
Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see a  
broken-down vehicle posing no serious hazard, a broken  
traffic signal, a minor traffic accident where no one appears  
injured, or a vehicle you know to be stolen, call roadside  
assistance or other special non-emergency wireless  
number.*  
* Wherever wireless phone service is available  
171  
 
Motorola Limited Warranty  
for the United States and Canada  
S2. Manufacturer’s Warranty  
What does this Warranty Cover?  
Subject to the exclusions contained below, Motorola, Inc.  
warrants its telephones, pagers, messaging devices, and  
consumer and professional two-way radios (excluding  
commercial, government or industrial radios) that operate via  
Family Radio Service or General Mobile Radio Service,  
Motorola-branded or certified accessories sold for use with  
these Products (“Accessories”) and Motorola software  
contained on CD-ROMs or other tangible media and sold for  
use with these Products (“Software”) to be free from defects in  
materials and workmanship under normal consumer usage for  
the period(s) outlined below. This limited warranty is a  
consumer's exclusive remedy, and applies as follows to new  
Motorola Products, Accessories and Software purchased by  
consumers in the United States or Canada, which are  
accompanied by this written warranty:  
Your phone has been designed to provide you with reliable, worry-free  
service. If for any reason you have a problem with your  
equipment, please refer to the manufacturer’s warranty in this  
section.  
For information regarding the terms and conditions of service  
for your phone, please visit www.nextel.com or call Nextel  
Customer Service at 1-800-639-6111.  
172  
     
Products and Accessories  
Products Covered  
Length of Coverage  
Products and  
Accessories that are  
Repaired or  
The balance of the original  
warranty or for ninety (90) days  
from the date returned to the  
consumer, whichever is longer.  
Products Covered  
Length of Coverage  
Products and  
One (1) year from the date of  
purchase by the first  
consumer purchaser of the  
product unless otherwise  
provided for below.  
Accessories as  
defined above,  
unless otherwise  
provided for below.  
Replaced.  
Exclusions  
Normal Wear and Tear. Periodic maintenance, repair and  
replacement of parts due to normal wear and tear are excluded  
from coverage.  
Decorative  
Limited lifetime warranty for the  
lifetime of ownership by the first  
consumer purchaser of the  
product.  
Accessories and  
Cases. Decorative  
covers, bezels,  
PhoneWrap™ covers  
and cases.  
Batteries. Only batteries whose fully charged capacity falls  
below 80% of their rated capacity and batteries that leak are  
covered by this limited warranty.  
Abuse & Misuse. Defects or damage that result from: (a)  
improper operation, storage, misuse or abuse, accident or  
neglect, such as physical damage (cracks, scratches, etc.) to  
the surface of the product resulting from misuse; (b) contact  
with liquid, water, rain, extreme humidity or heavy perspiration,  
sand, dirt or the like, extreme heat, or food; (c) use of the  
Products or Accessories for commercial purposes or  
subjecting the Product or Accessory to abnormal usage or  
conditions; or (d) other acts which are not the fault of Motorola,  
are excluded from coverage.  
Monaural Headsets.  
Ear buds and boom  
headsets that  
transmit mono sound  
through a wired  
connection.  
Limited lifetime warranty for the  
lifetime of ownership by the first  
consumer purchaser of the  
product.  
Consumer and  
Professional  
Two-Way Radio  
Accessories.  
Ninety (90) days from the date of  
purchase by the first consumer  
purchaser of the product.  
Use of Non-Motorola Products and Accessories. Defects or  
damage that result from the use of  
173  
Non-Motorola branded or certified Products, Accessories,  
Software or other peripheral equipment are excluded from  
coverage.  
Software  
Products Covered  
Length of Coverage  
Unauthorized Service or Modification. Defects or damages  
resulting from service, testing, adjustment, installation,  
maintenance, alteration, or modification in any way by  
someone other than Motorola, or its authorized service centers,  
are excluded from coverage.  
Ninety (90) days from  
the date of purchase.  
Software. Applies only to  
physical defects in the media  
that embodies the copy of the  
software (e.g. CD-ROM, or  
floppy disk).  
Altered Products. Products or Accessories with (a) serial  
numbers or date tags that have been removed, altered or  
obliterated; (b) broken seals or that show evidence of  
tampering; (c) mismatched board serial numbers; or (d)  
nonconforming or non-Motorola housings, or parts, are  
excluded from coverage.  
Exclusions  
Software Embodied in Physical Media. No warranty is made  
that the software will meet your requirements or will work in  
combination with any hardware or software applications  
provided by third parties, that the operation of the software  
products will be uninterrupted or error free, or that all defects in  
the software products will be corrected.  
Communication Services. Defects, damages, or the failure of  
Products, Accessories or Software due to any communication  
service or signal you may subscribe to or use with the Products  
Accessories or Software is excluded from coverage.  
Software NOT Embodied in Physical Media. Software that is not  
embodied in physical media (e.g. software that is downloaded  
from the internet), is provided “as is” and without warranty.  
Who Is Covered?  
This warranty extends only to the first consumer purchaser, and  
is not transferable.  
174  
(a) a copy of your receipt, bill of sale or other comparable proof  
of purchase; (b) a written description of the problem; (c) the  
name of your service provider, if applicable; (d) the name and  
location of the installation facility (if applicable) and, most  
importantly; (e) your address and telephone number.  
What Will Motorola Do?  
Motorola, at its option, will at no charge repair, replace or refund  
the purchase price of any Products, Accessories or Software  
that does not conform to this warranty. We may use functionally  
equivalent reconditioned/refurbished/pre-owned or new  
Products, Accessories or parts. No data, software or  
applications added to your Product, Accessory or Software,  
including but not limited to personal contacts, games and  
ringer tones, will be reinstalled. To avoid losing such data,  
software and applications please create a back up prior to  
requesting service.  
What other limitations are there?  
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT  
LIMITATION THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS  
LIMITED WARRANTY, OTHERWISE THE REPAIR,  
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS  
EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY  
OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT  
SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR  
TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS  
OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY  
OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL,  
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR  
LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS  
OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS  
OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN  
CONNECTION WITH THE ABILITY OR INABILITY TO USE THE  
PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL  
EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.  
How to Obtain Warranty Service or Other  
Information  
USA  
Phones  
1-800-453-0920  
1-877-483-2840  
TTY  
For Accessories and Software, please call the  
telephone number designated above for the product  
with which they are used  
You will receive instructions on how to ship the Products,  
Accessories or Software, at your expense, to a Motorola  
Authorized Repair Center. To obtain service, you must include:  
175  
Some states and jurisdictions do not allow the limitation or exclusion of  
incidental or consequential damages, or limitation on the length of an  
implied warranty, so the above limitations or exclusions may not apply  
to you. This warranty gives you specific legal rights, and you may also  
have other rights that vary from state to state or from one jurisdiction to  
another.  
Service and Repairs  
If you have questions or need assistance, we’re here to help.  
Go to www.motorola.com/support, where you can select from  
a number of customer care options. You can also contact the  
Motorola Customer Support Center at 1-800-453-0920 (United  
States), 1-877-483-2840 (TTY/TDD United States for hearing  
impaired).  
Laws in the United States and other countries preserve for  
Motorola certain exclusive rights for copyrighted Motorola  
software such as the exclusive rights to reproduce and  
distribute copies of the Motorola software. Motorola software  
may only be copied into, used in, and redistributed with, the  
Products associated with such Motorola software. No other use,  
including without limitation disassembly of such Motorola  
software or exercise of the exclusive rights reserved for  
Motorola, is permitted.  
176  
   

Miele Coffeemaker CM 5000 User Manual
Lenoxx Electronics CD 90 User Manual
Kenwood KDC 306 User Manual
JVC KD DV5500 User Manual
Hypertec HYFLUSB0 User Manual
HP Hewlett Packard Surestore DLT 80 User Manual
Fujitsu MBA3300NP User Manual
Compaq Computer Accessories User Manual
Black &amp; Decker Coffeemaker DCM80 User Manual
Barracuda Networks ST320414A User Manual