data protection for
medium to large
networks
DLT 80
The HP Surestore DLT 80 provides reliable data protection for midrange servers, with 80 GB
compressed capacity per tape and a transfer rate of 43.2 GB/hour, minimizing your backup time
and maximizing server availability. This high-capacity solution is designed for a 100% duty cycle
to meet the most demanding backup requirements. Based on DLT technology, the DLT 80 includes
additional reliability features such as advanced error detection and correction techniques, HP Library
and Tape Tools for installation and troubleshooting, and Tapealert for monitoring drive and media.
hp DLT 80
• 80 GB on a tape covers virtually any single backup operation.
key features
• A transfer rate of 40 GB/ hour keeps network downtime during backup to a minimum.
• Includes features that deliver extra reliability: advanced error detection and correction techniques, HP Library
and Tape Tools for troubleshooting, and Tapealert, which monitors drive and media for potential problems.
• HP has tested and proved the compatibility of the DLT 80 across the HP server range as well as with other
• Includes cables, rails, DLTtape IV data cartridge, cleaning cartridge, and TapeWare backup software for
complete in-box solution.
• Comes in internal and external models, plus an offline hot-swappable model for use in a racked environment
with HP’s Tape Array family.
• Three-year Express Exchange warranty.
• Supportpack warranty upgrade available.
technical specifications
capacity
40 GB native, typically 80 GB with hardware data compression*
HP DLTtape IV data cartridge
LVD/ SE wide Ultra SCSI-2
media
interface
transfer rate sustained
search speed
head life
cartridge life
MTBF
dimensions (hxwxd)
6 MB/ s (21.6 GB/ h) native, typically 12 MB/ s (43.2 GB/ h) with hardware data compression*
60 seconds average to locate a file in 80 GB of data
50,000 tape motion hours minimum (continuous operation)
1,000,000 passes
250,000 hours at 100% duty cycle
DLT 80i: 3.38 x 5.83 x 9.60 in (86 x 148 x 244 mm)
DLT 80m: 4.25 x 6.5 x 11.5 in (108 x 165 x 291 mm)
DLT 80i: 6.4 Ib (2.9 kg)
DLT 80e: 6.3 x 6.9 x 12.8 in (160 x 175 x 325 mm)
DLT 80e: 14.56 Ib (6.63 kg)
weight
DLT 80m: 7.5 lb (3.4 kg)
power requirements
hardware warranty
DLT 80i/m: 5V DC, 3.6A; 12V DC, 1.6A
Three-year Express Exchange
DLT 80e: 100–240V, 0.7A, 50–60 Hz
all products include
Installation guide, HP Surestore Tape CD-ROM (containing electronic user guide, drivers, HP Library and Tape Tools
utilities), Yosemite Technologies CD (containing TapeWare workstation and server backup software supporting
Windows® 95/ 98, Windows NT® Workstation, Windows 2000 Professional, Windows NT Server, Windows 2000
Server, Novell NetWare 4.x and 5.x, and Red Hat Linux 5.2 and 6), warranty registration card, HP Netserver L-series
mounting tray, HP Brio/ Vectra/ Kayak and HP Netserver E-series rails, Compaq rails, screws, one HP DLTtape IV data
cartridge, and one HP DLTtape cleaning cartridge.
All internal models also include: mounting tray for HP Netservers, jumpers, Compaq rails, and screws.
DLT 80e also includes: 1.5m external SCSI cable (68-pin high-density), power cable, multi-mode terminator.
ordering information
C5725A
HP Surestore DLT 80i
C7456A
HP Surestore DLT 80m
H3157A/ E
H4617A/ E
HP Supportpack 3-year, next-day response
HP Supportpack 3-year, 4-hour response
* assumes a 2:1 compression ratio; this may vary since compression is data dependent
Windows and Windows NT are U.S. registered trademarks of Microsoft Corporation.
Technical information in this document is subject to change without notice.
© Copyright Hewlett-Packard Company 2001
12/01
5980-8666EN
|