zap.bk : 900.fm5 Page 1 Wednesday, May 6, 1998 11:12 AM
zap.bk : qkref.fm5 Page 3 Wednesday, May 6, 1998 11:12 AM
Options Menu
Quick Access Menu ‡
English
zap.bk : qkref.fm5 Page 4 Wednesday, May 6, 1998 11:12 AM
Special Keys
Recording a VoiceNote
S
O
C
E
M
Press to turn phone on and off.
Press the Start/Stop Record button (?) on the side of the
phone. Press the button again to stop recording.
Press to accept call, setting, option,...
Press to reject call, setting, option,...
Press to enter the Quick Access features.
Playing a VoiceNote
Select Messages, VoiceNote, Play VoiceNotes, or use the
Quick Access item.
Press to enter the Options menu; press again
to scroll backward and forward through the
entries.
Redialling the Last Number Called
1
Press O to display the last number dialled.
<> Press both simultaneously to lock the keypad
on flipless models; also use to scroll left and
right.
2
Press O to call the number.
One-Touch Dialling
Press and hold the appropriate digit key 1 to 9.
Making a Call
Enter Phone No. O.
Storing Numbers in the Phone Book
Press E2 to store a number on the SIM card.
Receiving a Call
Press O or open the flip (only on models with flip
when the ‘Key Answer Only’ feature is set to Off).
Recalling a Number from the Phone Book
Press the Smart button (=) and then use the volume keys
to scroll to the stored number, or press the appropriate
digit key to skip to a particular letter. To make the call,
either hold down = for 1.5 seconds or press O.
Ending a Call
Press O or close the flip (models with flip only).
Making an Emergency Call
Enter 112O. The call will be directed to
a central emergency operator.
Dialling Phone Book Numbers
Enter Location >O
Stopping a Call Alert
Quick Access Features
Press either of the volume buttons when the phone is
ringing or vibrating. This will stop the alert but not
answer the call.
Press E followedbythe appropriatekey, orpress E,
scroll to the feature and press O to select.
Adjust Ringer Volume
Press E followed by the appropriate volume button to
either increase or decrease the ringer volume.
English
zap.bk : intro.fm5 Page 1 Wednesday, May 6, 1998 11:12 AM
Introduction
Welcome to the 900 Series
Congratulations on your purchase of a 900 Series phone from Motorola, the world leader in cellular technology. The 900 Series
phones are packed with features that put you in control and give you unrivalled power, whilst remaining discrete.
Control
Discretion
•
Customisable Quick Access Menu E - Place nine of your
•
•
•
VibraCall™ L - In locations where you don’t want your phone
to ring, or which are too noisy to hear your phone ring, your
phone can vibrate to alert you of a call.
most frequently used features in your own personal menu so
that they can be accessed with just two key presses. Icons make
each feature easy to identify.
Wearable Holster - Wear your phone in a stylish holster on your
belt. It is small enough and light enough to keep with you almost
anywhere.
•
VoiceNotes™ feature } - Allows you to record a number of
personal voice messages or to record part of a phone call -
useful when you haven’t got pen and paper to hand for taking
down directions or a message.
Stop Call Alert - Press either of the volume buttons when the
phone is ringing or vibrating. This will stop the alert but not
answer the call.
Power
Personality™
•
Superb battery performance G - Each phone is capable of
several hours conversation or several days standby, but is still
small and light.
This cellular telephone incorporates Personality™. Unique to
Motorola, Personality™ removes the complexity of cellular
communications by guiding you through the features and
presenting you with simple choices every step of the way.
Personality™ also allows you to personalise the way you use your
phone - for example, different ringer tones, a phone book and
network selection preferences - all presented with clarity and
simplicity. In this manual, each of the Personality™ features is
identified with an j symbol to indicate that it is customisable to
meet your requirements.
•
Dual Band
- ‘cd’ versions of the 900 Series include the
powerful dual band feature which means that they can use both
900 and 1800 MHz bands for greater call success and allow
wider roaming opportunities.
! Before you use your phone, please see the ‘Your Battery’
section for important information on charging a new
battery.
Introduction
1
English
zap.bk : intro.fm5 Page 2 Wednesday, May 6, 1998 11:12 AM
Understanding this Manual
Many of your phone options are accessed by a simple menu
Entering Information
When you are requested to enter information, such as the
number of the phone you wish to call, this is represented in bold
type. For example:
system. A full description of the menus and how to move around
them is covered in the next section Menu Navigation. When
the manual describes the use of each menu item, it will be
assumed that you are familiar with the menu system.
Phone No. - enter the required telephone number.
PIN Code - enter your Personal Identification Number.
Unlock Code - enter your unlock code.
Key Presses
Key presses are represented in this manual using symbols so that
you may locate and use the required sequence quickly. A
sequence of key presses may be shown as follows:
Location - enter the Phone Book location number.
Prompts and Messages
MOC
Your phone responds to key presses by displaying either easy to
understand prompts that guide you to the next action, or simple
messages confirming that your action is complete. Prompts and
messages are represented in this manual in LCD style, for
example:
This means that you should press the M key followed by the
O key and then the C key, in sequence, not
simultaneously.
Note that on models without a flip, the menu key is a rocker key
and can be pressed on either the right or left. Therefore in this
manual the following notation is used:
Enter PINor Completed.
Other Symbols
You will find the following symbols used throughout this manual:
Key
Shown
On Flip models press... On Flipless models press...
Either Menu key
Left Menu key
Right Menu key
Either side of Menu key
Left side of Menu key
Right side of Menu key
M
(
)
A
!
j
A Note contains additional information which is relevant to
the feature/item.
A Caution contains important additional information which
is relevant to the efficient and/or safe usage of your phone.
This symbol indicates that the feature is a Personality™
feature that can be customised to meet your requirements.
i This symbol indicates a short key sequence for the feature.
English
Introduction
2
zap.bk : intro.fm5 Page 3 Wednesday, May 6, 1998 11:12 AM
Menu Navigation
A large number of your phone's options are accessed by using
menus which use a common approach for selection, change and
cancellation.
Menus and Sub-menus
A menu is a simple list of options. Some of these options provide
access to a further list of options called a sub-menu. When
navigating through the menus you may find it is helpful to think
in terms of menu levels - the ‘parent’ menu being on one level
and its sub-menus being on a lower level.
Please read this section carefully before attempting to access a
menu option. When you understand the common approach to
menu navigation and how the menus are shown on the page,
you will be able to access and change options with ease.
Moving to and Selecting a Menu Option
Entering the Menus
Two different keys (three on flip phones) are used to access the
menus:
To move from one option to another on the same level, use the
scroll keys: the ) key scrolls forwards and the ( key
scrolls backwards. When you find the option you want, press the
O key to select it.
M
E
enters the Options menu whilst in standby mode;
enters the In-call menu during a call.
Depending on the option you select, one of three things will
happen:
enters the Quick Access menu.
•
•
•
either a brief message will be displayed confirming an action,
for example Completed.
Once entered, the menus use the M, <, >, O and
C keys in a common manner to access, select and change
individual options.
or a prompt will be displayed requesting you to enter
information, for example Enter PINor Enter Name.
Leaving the Menus
To leave any of the menus, you can either press and hold the
C key or repeatedly press the C key. Both of these actions
will return your phone to the standby mode.
or the first option of a sub-menu will be displayed. You can
select this option using the O key or browse through the
other options using the scroll keys.
To leave an option or sub-menu, press the C key. This will
take you back to the parent menu item.
i
Alternatively, a quicker way to leave the menus is to press
EC.
Menu Options with Security Codes
Some options are protected from misuse by requiring you to
entry one of the security codes. To use these options, you must
enter the requested code before proceeding.
English
3
Introduction
zap.bk : intro.fm5 Page 4 Wednesday, May 6, 1998 11:12 AM
Menu Navigation - A Working Example
The following steps will take you through how to switch the
Extended Menus option on:
1
2
When the phone is in the standby mode, press the M key.
This will access the Options menu and Phone Book will be
#
displayed.
Press the ) key three times to go to the Phone Setup
menu item.
3
4
Press the O key to select the sub-menu.
Press the ) key repeatedly until the Extended Menus
sub-menu item is shown in the display.
5
Press the O key to select this item. You can now select
between Onor Off, the current setting will be shown with a
z character. If the z character is next to Off, press )
and then O to switch on the Extended Menus. If the z
character is next to On, press C to leave the setting as it is.
#
†
If your service provider has added their own menu, the Phone
Book menu will not be the first item in the Options menu.
Availability depends on the type and settings of the SIM card,
and/or your subscription to these features.
English
Introduction
4
zap.bk : intro.fm5 Page 5 Wednesday, May 6, 1998 11:12 AM
jShort, Extended and Personalised Menus
With Personality™ you can personalise the menus by choosing
which features you want readily available. The features that are
less frequently used can be stored out of sight.
The menu diagrams in this manual show the condition of the
menu settings when you first receive your phone. Some features
are in the Short Menu and are shown in bold type. Other
features are in the Extended Menu and appear in shaded italics.
You can change which features appear in the Short and
Extended Menus, and therefore personalise the menus, to suit
your requirements.
If you want to move a feature from the Short Menu to the
Extended Menu (or from the Extended Menu to the Short Menu),
go to the feature and then hold down the O key until a
prompt appears offering the following choices:
•
•
Add the current feature to the Short Menu/Extended Menu.
Leave the current feature in the Short/Extended Menu.
Select the option you want by pressing the O key.
The settings for some menu features cannot be changed.
English
5
Introduction
zap.bk : intro.fm5 Page 6 Wednesday, May 6, 1998 11:12 AM
Saudi Arabia
01 2303294
Total Customer Satisfaction
South Africa
Spain
0800 11 48 49
902 100 077
08 445 1210
0800 553 109
0212 2729090
0500 55 55 55
04 32 11 66
At Motorola, Total Customer Satisfaction is a top priority. If you
have a question, a suggestion or a concern about your Motorola
Cellular Phone, Motorola wants to hear from you.
Sweden
Please contact the Motorola Cellular Response Centre by fax on:
+44 (0)131 458 6732, or use one of the local phone numbers in
the following countries:
Switzerland
Turkey
UK
Austria
Belgium
Denmark
Egypt
0660 7246
United Arab Emirates
0800 72 370
43 43 15 56
02 3411800
01 402 6887
0800 117 036
0801 63 67 03
0180 35050
01 748 7203 (fax only)
02 696 33316
06 863750
For e-mail queries contact: [email protected]
For Internet queries contact: http://www.mot.com
Eire
Motorola’s Warranty
Finland
France
Your Cellular Phone is warranted by Motorola to be of
satisfactory quality, fit for its purpose and to comply with
applicable Motorola specifications for a period of twelve (12)
months from the date you bought it (verified by reference to your
proof of purchase).
Germany
Greece
Italy
This warranty does not apply if the phone has
Jordan
1
2
3
been mishandled, misused, wilfully damaged, neglected,
improperly tested, repaired, altered or defaced in any way.
Kuwait
Lebanon
Luxembourg
Netherlands
Norway
Oman
484 2000 Ext 1177
01 744156
a defect arising as a result of any failure to follow instructions
either in the manual or product specification.
0800 21 99
a defect which has arisen from the use of non-Motorola
approved accessories or ancillary items attached to or in
connection with the telephone.
0800 022 2743
22 55 10 04
790925
This warranty does not affect your statutory rights as a consumer.
Portugal
Qatar
01 318 0051
418999
Warranty conditions may vary depending on the country in which
you bought the phone.
English
Introduction
6
zap.bk : toc.fm5 Page 7 Wednesday, May 6, 1998 11:12 AM
Contents
Safety Information for Wireless Handheld Phones
Important information for the efficient and safe operation of your phone................................................................................9
About Your Phone, Battery and SIM Card
Introduces your phone, explains how to charge and maintain batteries, explains about your SIM Card...............................13
Making and Receiving Phone Calls
Explains how to make single or conference calls, how to redial, how to transfer a call, and how to end a call....................21
Using VoiceNotes™
Explains how to use the VoiceNotes™ feature on your phone ..................................................................................................31
Using The Options Menu
Provides an explanation of the Options Menu and how to use it..............................................................................................33
Using the Quick Access Menu
Provides an explanation of the Quick Access Menu and how to use it......................................................................................67
Accessories
Details the accessories available for use with your phone..........................................................................................................71
What To Do If...
Helps you to solve any problems that may occur.........................................................................................................................73
Index
A comprehensive Index ..................................................................................................................................................................75
The Manufacturer reserves the right to make changes in technical and product specifications without prior notice.
7
Contents
English
zap.bk : toc.fm5 Page 8 Wednesday, May 6, 1998 11:12 AM
English
Contents
8
zap.bk : safety.fm5 Page 9 Wednesday, May 6, 1998 11:12 AM
Safety Information For Wireless Handheld Phones
Phone Operation
IMPORTANT
Normal Position: Hold the phone as you would any other telephone with
the antenna up and over your shoulder.
FOR THE EFFICIENT AND SAFE OPERATION OF YOUR
WIRELESS HANDHELD PORTABLE TELEPHONE, OBSERVE
Tips on Efficient Operation: For your phone to operate most efficiently:
THESE GUIDELINES.
•
•
If your phone has a retractable antenna, extend your antenna fully.
Exposure To RF Energy
Do not touch the antenna unnecessarily when the phone is in use. Contact
with the antenna affects call quality and may cause the phone to operate
at a higher power level than otherwise needed.
Your wireless hand-held portable telephone is a low power radio transmitter
and receiver. When it is ON, it receives and also sends out radio frequency (RF)
signals.
Batteries
European and International agencies have set standards and
recommendations for the protection of public exposure to RF electromagnetic
energy.
! All batteries can cause property damage, injury or burns if a
conductive material such as jewellery, keys or beaded chains
touches exposed terminals. The material may complete an
electrical circuit and become quite hot. To protect against such
unwanted current drain, exercise care in handling any charged
battery, particularly when placing it inside your pocket, purse
or other container with metal objects. When the battery is
detached from the phone, your batteries are packed with a
protective battery cover; please use this cover for storing your
batteries when not in use.
• Verband Deutscher Elektrongenieure (VDE) DIN-0848
• International Commission on Non-Ionizing Radiation Protection (ICNIRP)
1996
• Directives of the European Community, Directorate General V in Matters of
Radio Frequency Electromagnetic Energy
• National Radiological Protection Board of the United Kingdom, GS 11, 1988
• American National Standards Institute (ANSI) IEEE.C95.1-1992
Driving
• National Council on Radiation Protection and Measurements (NCRP).
Report 86
Check the laws and regulations on the use of wireless telephones in the areas
where you drive. Always obey them. Also if using your phone while driving,
please:
• Department of Health and Welfare Canada. Safety Code 6
These standards are based on extensive scientific review. For example, over
120 scientists, engineers and physicians from universities, government health
agencies and industry reviewed the available body of research to develop the
updated ANSI Standard.
•
•
•
give full attention to driving - driving safely is your first responsibility
use hands-free operation, if available
pull off the road and park before making or answering a call if driving
conditions so require.
The design of your phone complies with these standards when used normally.
Antenna Care
Use only the supplied or approved replacement antenna. Unauthorised
antennas, modifications or attachments could damage the phone and may
violate FCC regulations.
9
Safety Information For Wireless Handheld Phones
English
zap.bk : safety.fm5 Page 10 Wednesday, May 6, 1998 11:12 AM
Electronic Devices
Vehicles
Most modern electronic equipment is shielded from RF energy. However,
certain electronic equipment may not be shielded against the RF signals from
your wireless phone.
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Pacemakers
Posted Facilities
Turn your phone OFF in any facility where posted notices so require.
The Health Industry Manufacturers Association recommends that a minimum
separation of six (6”) inches be maintained between a handheld wireless
phone and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research.
Aircraft
FCC regulations prohibit using your phone while in the air. Switch OFF your
phone before boarding an aircraft.
Persons with pacemakers:
Blasting Areas
•
Should ALWAYS keep the phone more than six inches from their
pacemaker when the phone is turned on.
To avoid interfering with blasting operations, turn your phone OFF when in a
“blasting area” or in areas posted: “turn off two-way radio”. Obey all signs
and instructions.
•
•
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the potential for
interference.
Potentially Explosive Atmospheres
Turn your phone OFF when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death.
If you have any reason to suspect that interference is
taking place, turn your phone OFF immediately.
Hearing Aids
Areas with a potentially explosive atmosphere are often, but not always,
clearly marked. They include fuelling areas such as petrol stations; below decks
on boats; fuel or chemical transfer or storage facilities; and areas where the air
contains chemicals or particles, such as grain, dust, or metal powders; and any
other area where you would normally be advised to turn off your vehicle
engine.
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference you may want to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this information.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects, including both
installed or portable wireless equipment, in the area over the air bag or in the
air bag deployment area. If in vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
Turn your phone OFF in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
English
Safety Information For Wireless Handheld Phones
10
zap.bk : safety.fm5 Page 11 Wednesday, May 6, 1998 11:12 AM
European Union Directives
Conformance Statement
This product is in conformance with the requirements
of the applicable EU Council Directives.
Declarations of Conformance with the requirements
are located at:
Motorola Ltd.
European Cellular Subscriber Group
Midpoint, Alençon Link
Basingstoke, Hampshire RG21 7PL
United Kingdom
English
11
Safety Information For Wireless Handheld Phones
zap.bk : safety.fm5 Page 12 Wednesday, May 6, 1998 11:12 AM
English
Safety Information For Wireless Handheld Phones
12
zap.bk : abtphone.fm5 Page 13 Wednesday, May 6, 1998 11:12 AM
About Your Phone, Battery and SIM Card
If you are using the optional headset, you can also use the Smart
button to make, answer and end calls as follows:
Special Keys
S
O
C
E
M
Turns the phone on and off.
•
•
To answer a call, press = for 1.5 seconds.
Accept call, setting, option.
Reject call, setting, option.
Enter the Quick Access menu.
To end a call, press = for 1.5 seconds and then quickly press
= again.
•
To make a call, enter or recall a number and then press and
hold = for 1.5 seconds.
Enter the Options menu and scroll backward and
forward through the entries.
Volume Buttons
<> Press both simultaneously to lock the keypad on
flipless models; also use to scroll left and right.
The Volume buttons (up - +, down - -) are on the left hand
side of your phone, above and below the Smart button. The
buttons are used for adjusting the keypad, earpiece and ringer
volume. A volume meter will display the current volume setting.
The meter will disappear after a short time, or if you press O
or C.
The Flip (if fitted)
Opening the flip answers a call (when the ‘Key Answer Only’
feature is set to Off, the default position).
Closing the flip ends a call.
•
To adjust the keypad and earpiece volume, press the buttons
with no other features selected.
The Smart Button
The Smart button (=) is on the left hand side
of your phone in-between the two volume
keys. Press it to quickly access all your Phone
Book entries, and then either scroll through
the entries using the volume buttons or press
one of the alphanumeric keys to search for a
specific name - for example, press 7 to
search for the name Pam, or press 7 four
times to search for the name Sam.
•
To adjust the ringer volume, first select the ‘Adjust Ring
Volume’ option in the Phone Setup Menu and then use the
buttons to set the required volume.
The volume buttons can also be used to scroll though the Phone
Book entries after pressing the Smart button.
AIf you receive a call and you do not want to answer it
immediately, you can press either of the volume buttons to
stop the phone from ringing or vibrating. This will not answer
the call.
AIf a Phone Book entry does not have a
name, it will not be displayed.
13
About Your Phone, Battery and SIM Card
English
zap.bk : abtphone.fm5 Page 14 Wednesday, May 6, 1998 11:12 AM
Roam. Displayed when you are registered on a
system other than your home system.
l
n
Home zone. Availability depends on your service
provider.
Short Message Service. Displayed when the
phone has received a message. The symbol will
flash when your message storage area is full.
o
The Start/Stop Record Button
The Start/Stop Record button (?) is on the right
hand side of your phone. Press it to start and
stop recording VoiceNotes™. Refer to Using
Voicemail waiting indicator. Displayed when you
have a voice message waiting. The availability of
this feature depends on your service provider.
p
VoiceNotes™ for more information.
Ringer On. Displayed when the call ringer is
selected. If you select the No Ring or Vibrate or the
Vibrate Only options this symbol will not be
displayed.
h
The Display
The display on your phone can
Icons are displayed when you are in the Quick
Access menu.
B...K
A scroll bar will appear on the right of the display
when you are in a list/menu. The button on the
scroll bar indicates where you are in the list.
show alphanumeric characters as
well as useful information
symbols.The various elements of
the display are as follows:
s
z
Indicates that a menu item is currently selected.
12:00
Real Time Clock. The real time clock can display
the time in either a 12-hour or 24-hour format.
In addition, when you are expected to press the O key, a
prompt will appear in the display, for example Entry
Complete?.
Characters are used to display messages and
telephone numbers.
ABC123
q
Battery Charge Indicator. The more segments
displayed, the greater the battery charge.
Low Temperature Use
Signal Strength. The more segments displayed in
the bar graph, the better the signal strength.
rx
k
The liquid crystal display used in your phone will behave
differently at extremely low temperatures. You may notice that
the display responds slowly to key presses; this is to be expected
and does not affect the phone operation in any way.
In Use. Displayed when a call is in progress.
English
About Your Phone, Battery and SIM Card
14
zap.bk : abtphone.fm5 Page 15 Wednesday, May 6, 1998 11:12 AM
Looking After Your Phone
Your Battery
Charging a New Battery
•
Never leave your phone or battery in extreme temperatures
(over 60°C), for example behind glass in very hot, direct
sunlight.
New batteries are supplied in a totally uncharged state.
•
To clean your phone, use a moistened or antistatic cloth. Do
not use a dry or electrostatically charged cloth.
To ensure maximum battery performance, a new battery (or
battery that has not been used for several months) should be
charged for at least 14 hours before use.
AA new battery will require several full charge/discharge cycles
in order to achieve its optimum performance.
AA new battery, or a battery that has not been used for several
months, may cause a premature fully charged indication.
Ignore this indication and let the battery charge for several
more hours, remove and re-insert the battery into the charger,
and charge for an additional 14 hours.
The Status Indicator
The status indicator on the top of the phone
provides you with the following information:
Incoming Call
In Service
Alternate Red/Green
Flashing Green
Flashing Red
Important Battery Information
! Always treat your batteries with care. See ‘Batteries’, at
No Service
Roaming
the beginning of this manual.
Flashing Yellow
! Never leave your battery in extremely high
temperatures (over 60°C), for example behind glass in
very hot, direct sunlight.
! Only Motorola Original Accessory batteries can be
charged in the phone or the optional desktop charger.
This is to protect you and your phone from the risks of
incorrect charging.
ADo not use lithium ion batteries at extremely low temperatures
as the maximum standby/talk time will not be available when
cold.
English
15
About Your Phone, Battery and SIM Card
zap.bk : abtphone.fm5 Page 16 Wednesday, May 6, 1998 11:12 AM
To ensure that you enjoy maximum battery life and use your
battery to it's fullest capacity:
Removing Your Battery
! Switch off your phone before removing the battery.
•
The battery should be at or near room temperature when
charging.
Failure to do so may damage your phone memory.
1
2
Press the release catch on the battery compartment and lift off
the cover.
Battery Performance and Maintenance
•
Push the battery towards the top of the phone and lift the
battery out from the bottom end.
Best battery performance will be achieved when you regularly
charge and discharge batteries as instructed in this manual.
•
•
Battery performance is greatly affected by network coverage.
Set Battery Saving Mode to On (see ‘Phone Setup Menu’)
and/or Frequency of Search to Slow or Medium (see
‘Network Selection Menu’).
•
•
If left unused, a fully charged battery will discharge itself in
approximately one month.
When not in use, store your battery uncharged in a cool, dark
and dry place.
Low Battery Warning
When the battery level is low and only a few minutes of talk time
remain, a warning signal (two double beeps) will sound, the
border of the battery symbol will begin to flash, and Low
Batterywill be displayed.
When the battery is completely discharged, your phone will turn
off.
English
About Your Phone, Battery and SIM Card
16
zap.bk : abtphone.fm5 Page 17 Wednesday, May 6, 1998 11:12 AM
2
Connect the travel charger to the phone.
Fitting Your Battery
AThe connector is keyed and can only be inserted one way.
1
Remove the battery compartment cover.
2
Align the connections on the battery with the connections on
the phone.
3
Press the battery towards the connections and push it
downwards until it clicks into place. Replace the cover.
Charging Your Battery Using the Travel
Charger
The travel charger can power the phone and charge a fitted
battery.
3
Insert the travel charger plug into a suitable mains power
socket.
A beep-tone is heard and the battery icon flashes when charging
begins.
! Ensure that the local mains voltage at your location
matches that of your travel charger.
AYour phone can be either on or off during charging.
Fit a battery onto your phone.
To charge your battery:
The state of charging is monitored and displayed by your phone.
See ‘Battery Meter Indicators’ later in this section for details.
1
Attach the correct adapter plug to the travel charger.
English
17
About Your Phone, Battery and SIM Card
zap.bk : abtphone.fm5 Page 18 Wednesday, May 6, 1998 11:12 AM
A spare battery can be charged on its own or at the same time as
your phone. Insert the battery into the desktop charger as
shown.
Desktop Charging Your Battery
AThe Desktop Charger is an optional accessory that allows you
to charge both the battery fitted in your phone and a spare
battery at the same time.
AFor maximum NiMH battery charging, you should double the
charge time.
Batteries charge in about 2 to 3 hours, depending on the battery.
ACharge times will increase if you make or receive phone calls
while charging.
AIt is normal for batteries to become warm during charging.
1
Connect the travel charger to the desktop charger socket.
(The connector is keyed and can only be inserted one way.)
Battery Indicators
2
3
Plug the travel charger into a standard mains socket.
Insert your phone into the desktop charger as shown.
Your phone monitors and displays information about your
battery. The following message will appear on the display, as the
condition occurs:
Low Battery
The battery charge is low. The battery should
be recharged.
Insert Battery
No battery fitted; external power connected
Battery Meter Indicators
The battery meter displays different messages depending on the
batteries attached, and whether or not there is an external power
source. The battery meter is found in the Call Related Features
part of the Options Menu.
Charging Battery
The battery is being charged.
Fast charging is complete.
Fast Charge
Complete
English
About Your Phone, Battery and SIM Card
18
zap.bk : abtphone.fm5 Page 19 Wednesday, May 6, 1998 11:12 AM
Your SIM Card
Your SIM (Subscriber Identity Module) card was supplied by your
Cellular Service Provider when you bought your phone. You will
not be able to make or receive calls if you do not have a SIM card
inserted in your phone.
4
Insert the SIM card into the holder as shown. The SIM card
should be inserted with the notch at the top and facing
towards the base of the phone.
ASome networks allow you to make emergency calls without a
SIM card inserted.
The SIM card is a ‘Smart Card’ that contains your phone number,
service details and memory for storing Phone Book numbers and
messages. You can therefore use your SIM card in someone else’s
GSM phone and you will be charged for the call.
Like a bank or credit card, you should keep your SIM card secure.
Do not bend or scratch your card and avoid exposure to static
electricity or water.
! Switch off your phone before inserting or removing the
SIM card. Failure to do so may damage the memory on
your SIM card.
SIM Card Insertion/Removal
5
6
Replace the holder and press and slide it to the left to lock it
into place.
1
2
3
Switch off your phone by pressing and holding the S key,
remove the battery cover and the battery.
Replace the battery and battery cover.
Slide the SIM holder towards the right and lift up the left side
of the holder.
If the SIM card is inserted the wrong way round, or damaged, the
Check Card message may be displayed. Remove the SIM card,
check that it is the right way round and then re-insert it into the
phone.
Remove the SIM card from the holder if necessary.
If either of the Bad Card See Supplier or Blocked See
Suppliermessages are displayed, then you will need to contact
your Cellular Service Provider.
English
19
About Your Phone, Battery and SIM Card
zap.bk : abtphone.fm5 Page 20 Wednesday, May 6, 1998 11:12 AM
English
About Your Phone, Battery and SIM Card
20
zap.bk : usephone.fm5 Page 21 Wednesday, May 6, 1998 11:12 AM
Making and Receiving Phone Calls
Switching the Phone On and Off
To switch the phone on or off, press and hold the S key. If
VibraCall™ is selected, the phone will vibrate when it is switched
on.
! If the PIN number is entered incorrectly three times in a
row, your phone will automatically lock-up and the
Blockedmessage will be displayed. See ‘Unblocking
Your Phone’ for details on unblocking your phone.
If you switch the phone on and there is no SIM card inserted, you
will be asked to insert one. Once inserted, the phone will check
that the SIM card is valid.
The PIN code can be changed, see ‘Change SIM PIN Code’ in the
Call Related Features Menu section for more details.
A number of messages will then be displayed:
j Entering Your Unlock Code
If your phone displays the message Enter Phone Unlock
Codeyou must enter your unlocking code by entering Unlock
Code O.
• Enter PIN - a request to enter the SIM card PIN code (if
required).
• Enter Phone Unlock Code - a request to enter the phone
unlock code (if required).
The unlock code is a four digit number which is set at
manufacture to 1234. The code can be changed, see ‘Change
Unlock Code’ in the Phone Setup Menu section for more
details.
• Searching... followed by a network name - as the phone
searches and then finds a suitable network to connect to.
Entering Your SIM Card PIN Code
To enter the PIN code, enter PIN Code O.
If you forget your unlock code, press the M key. This will
display the ‘Change Unlock Code’ option. Enter O Security
Code, enter a new unlock code, and press O.
As you type in each digit of the PIN code a *character will be
displayed.
If you make a mistake, press and release the C key to remove
the last digit. Holding the C key down will remove the entire
entry.
When the PIN code is complete press the O key.
If the PIN code entered is incorrect, the warning message Wrong
PINwill be displayed, followed by Enter PIN.
21
Making and Receiving Phone Calls
English
zap.bk : usephone.fm5 Page 22 Wednesday, May 6, 1998 11:12 AM
Making a Phone Call
To make a phone call, your phone must be switched on and
unlocked.
The simplest method of making a phone call is to enter the
number using the digit keys then press O.
It will not be possible to make a phone call unless you are in an
area where there is a GSM900 or GSM1800 service. When a
service has been found, a series of rising bars, x, will
show the signal strength.
AIf you make a mistake, press and release the C key to
remove the last digit. Holding the C key down will remove
the entire number.
Your phone will then attempt to make the phone call. The display
will show Callingto show the call attempt is being made. If
the call is not answered, pressing O, or closing the flip (models
with flip only), at this point will end the attempt.
There are a number of different ways to make a phone call:
•
•
•
•
•
•
•
Using the digit keys.
Using automatic redial.
When the phone call is answered, the display will change to
Connectedfor a few seconds, followed by End Call?.
Redialling the last number called.
One-touch dialling a Phone Book entry*.
Dialling a Phone Book entry*.
Calling an embedded number in a message.
Using the Smart button (=).
To end your call press O, or close the flip (models with flip
only).
Automatic Redial
If your call attempt does not succeed, the message Redial?will
be displayed for five seconds. Pressing O at this point will
automatically redial the phone number.
A*Your phone contains a 'phone book' that can be used to
store names and telephone numbers. See ‘What is the Phone
Book?’ for further details.
When the call is answered, you will hear a short ring tone.
The maximum number of redial attempts is set by your Cellular
Service Provider. If the phone call cannot be connected within
this maximum, the message Redial Failed will be shown.
English
Making and Receiving Phone Calls
22
zap.bk : usephone.fm5 Page 23 Wednesday, May 6, 1998 11:12 AM
Redialling the Last Number Called
When in standby mode, press OO.
International Phone Calls
To make an international phone call press and hold the 0 key.
After a couple of seconds the international dialling prefix +will
appear in the display, this allows you to call from any country
without knowing the local international access code.
i
Alternatively, you can retrieve the last number dialled using the
‘Last Ten Calls’ feature in the Phone Book menu.
Now enter the country code, followed by the phone number. The
country code follows the conventional format, 49 for Germany,
44 for the UK, 46 for Sweden, etc.
j One-Touch Dialling Phone Book Numbers
To quickly retrieve and dial a number stored in the first nine
1
locations of your Phone Book , press and hold the appropriate
Just like a conventional international call, remove the leading '0'
of the area code when you dial.
digit key. For example, pressing and holding 2 will dial the
phone number stored in location 2 of your Phone Book.
Inserting Pauses Into Phone Numbers
AYou do not need to press O to call the number.
To obtain a three second 'pause' character in a phone number,
press and hold the < key for a couple of seconds, the pause
symbol Üwill appear.
j Dialling Phone Book Numbers
i
Press the Smart button (=) and use the volume buttons to
scroll to the stored number, or press the appropriate digit
key to skip to a particular letter. To make the call, either
hold down = for 1.5 seconds or press O.
The pause character produces a three second delay whenever it is
used. However, the first pause character in a phone number is a
special case, it will not begin its delay until the call is answered.
Pause - A Working Example.
If, for example, you have a tone-based voicemail system on
555-6911, with a mailbox number 1066 and password 2001.
Then you may dial the following number:
Alternatively, enter the phone book location number followed
by >O.
Calling an Embedded Number in a Message
Details on how to call a number embedded in a message are
5556911Ü1066Ü2001O.
The first part of the number would be used to call the voicemail
system.
given in the Messages Menu section.
When the call is answered the first pause will produce a delay of
three seconds before the tones for 1066are sent to select the
mailbox.
1. The Phone Book entries that you are able to access will
depend on the One-Touch Dial Setting option in the Phone
Book menu.
There will be a second pause of three seconds before the tones
for 2001 are sent as the password.
English
23
Making and Receiving Phone Calls
zap.bk : usephone.fm5 Page 24 Wednesday, May 6, 1998 11:12 AM
GSM Emergency Calls
The worldwide GSM standard provides a single, uniform number,
Receiving a Phone Call
112, to dial in cases of emergency.
To receive a phone call:
Provided that your phone has found a network, you will be able
to make an emergency call. The call can be made regardless of
any security codes and, depending on the network, with or
without a SIM card inserted.
•
•
•
Your phone must be switched on and unlocked.
You must be in an area where there is GSM 900/1800 service.
Your Call Diversion and Call Barring settings should not be set
to divert or bar incoming calls.
The emergency call will be directed to a central emergency
operator.
When your phone receives a call, it will ring or vibrate and the
display will show the Call message (if you have Caller Line
Identification, the caller’s number or name will be displayed
instead).
To dial the GSM emergency number, press 112O.
While the emergency call is being made and connected, the
display will show Emergency Calling.
To answer the call, press O or open the flip (only on models
with a flip when the ‘Key Answer Only’ feature is set to Off).
AEmergency calls can be made without a battery fitted if the
phone is powered by the travel charger.
If you do not wish to answer a call you can either:
Press and release the C key. If you have enabled the
'Detailed Diverting - If Busy' or ‘Divert when unavailable’
options in the Options Menu, the caller will be diverted to the
forwarding number, otherwise the caller will hear the busy
tone.
or
Press and hold the C key. This will reject the incoming call.
No call divert option will be offered.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed to show you that a call
attempt was received.
Ending a Phone Call
To end a phone call, press O or close the flip (models with flip
only).
English
Making and Receiving Phone Calls
24
zap.bk : usephone.fm5 Page 25 Wednesday, May 6, 1998 11:12 AM
In-Call Menu
The “In-Call” menu provides access to additional functionality
during a call.
Entering the In-Call Menu
The “In-Call” menu is accessed by pressing the M key during
a call.
Leaving the In-Call Menu
To leave the “In-Call” menu press the C key.
In-Call Menu Options
The options listed in the “In-Call” menu will dynamically change
depending on the current call state. The following list contains all
of the possible options in the “In-Call” menu.
AOnly some of the options will appear at any given time. The
order of the options may vary.
Handsfree On/Off
This option is used to switch between Handsfree and normal
operation if the phone is installed in a car kit that does not have
an automatic presence detector.
Hold Call
This option will put the active call on hold.
Make a New Call
This option allows you to make another call.
Restrict My Number
This option allows you to make a call without the remote user
getting advanced warning of the number.
End Active Call
This option terminates the active call, and makes the call that was
previously on hold, the active call.
English
25
Making and Receiving Phone Calls
zap.bk : usephone.fm5 Page 26 Wednesday, May 6, 1998 11:12 AM
End Held Call
This option will terminate a held call.
j Call Holding and Call Waiting
End Active And Held
This option will terminate all connected calls.
Your phone supports the GSM options of Call Holding and Call
Waiting. Using these options you can place a current phone call
on hold and accept an incoming call or start a second call (See
‘Call Waiting’ in the ‘Call Related Features’ menu for details
of how to control this feature).
Switch
This option allows you to switch between the active call and the
call that is on hold.
Call Holding and Call Waiting Scenarios
Conference Call
The display will automatically change according to the status of
your current call (or calls) and will propose the option that you
are most likely to want. Press O to accept this option or press
M to scroll through the “In-Call” menu for the alternative
options. By following this procedure you will find that even the
triple combination of an active call, a held call, and a call waiting
is easy to manage.
This option connects you with up to five other telephones on one
call (see ‘Making a Conference Call’).
Transfer Call
This option transfers a call to another telephone (see ‘Transfer
Call’ later in this section).
Split Call
This option allows you to separate an individual from the main
Conference Call.
The following points summarise the more common situations:
•
•
•
To put an active call on hold, press M, the display will
show Hold Call Select?- press O to put the call on
hold. To reconnect the call, press O.
Reject Waiting Call
This option will reject a waiting call.
To put an active call on hold and make another call, first put
Reconnect
the active call on hold, then press M and select the Make
This option will make the call on hold the active call.
1
New Call option .
Reconnect Held Call
To switch between an active call and a held call press O at
This option is similar to Reconnectbut will appear if you have a
call on hold, and a call waiting. Reconnect Held Call will
make the call on hold the active call.
the Two Calls Switch? prompt.
Turn Mute On or Off
Temporarily turns the microphone off during a phone call.
Reselect this option to resume your conversation.
1. A quicker method of making another call is to enter the
number to be called directly and press O. Your phone will
place the current call on hold and attempt to call the number
entered.
English
Making and Receiving Phone Calls
26
zap.bk : usephone.fm5 Page 27 Wednesday, May 6, 1998 11:12 AM
•
To accept a waiting call during an active call, press O at the
Call Waiting Answer? prompt. The active call will be
placed on hold. If you prefer to end the active call before
accepting the waiting call, press M and select the End
Active Call option.
Anonymous
The person who is calling you has blocked their number from
appearing on your phone.
Unavailable
The network is unable to provide the caller’s number.
•
To reject a waiting call, press M and select the Reject
Conference Unsuccessful
Call Waiting option (or simply press the C key).
The request for Conference Call has been unsuccessful.
Transferring Call
AIf you have an active call, a call on hold and a call waiting, you
cannot accept the waiting call until you end either the active
call or the held call, or join the active and held calls.
A request to transfer a call has been made.
Transfer Unsuccessful
Call Holding and Call Waiting Messages
During Call Holding and/or Call Waiting operations, your phone
may display one or more of the following messages:
The request to transfer a call has been unsuccessful.
Trying
A request to hold the active call, swap the active with a held
call, or add a member to a Conference Call, has been made.
or
A request to reconnect the held call has been made.
Hold Failed
The request to hold a call has been unsuccessful.
Cannot Hold Second Call
A call is already on hold, you cannot place two calls on hold at
the same time.
Reconnect Failed
The held call could not be made active again.
Busy Try Later
Your phone is still working on a previous command. Wait a
short time before repeating the command.
English
27
Making and Receiving Phone Calls
zap.bk : usephone.fm5 Page 28 Wednesday, May 6, 1998 11:12 AM
Making a Conference Call
This option joins the active call with a held call. With Conference
Call, you can have a conference with up to five other telephones.
At any time during your call, you can add, disconnect or separate
individuals from the Conference Call using other “In-Call” menu
options.
No matter which method is chosen to add a new call, the original
Conference Call will be first placed on hold while the new call is
being connected. You must then enter the “In-Call” menu and
select Conference Call to join the New Call with the original
Conference Call in progress.
AYou must subscribe to both Conference Call and Call Waiting
Supplementary Services to be able to use this feature.
Separate One of the Members in the Conference
During a Conference Call, you will also have the option to
separate a selected member from the main Conference Call.
Initiating a Conference Call
To initiate a Conference Call, place the active call on hold, and
dial another phone number. You will then have one active call
and one call on hold.
AIn order to separate a member from the main Conference Call,
there must not be any calls on hold.
Press M during a Conference Call and select Split Call.
You will then be presented with the phone number or name of
all members of the Conference Call. Use the scroll keys to find
the selected member of the Conference Call. Once the desired
member is selected, press the O key and select Split Call.
Press the M key to enter the “In-Call” menu and select
Conference Call. The currently active call and the call on
hold will then join into one Conference Call.
Managing a Conference Call
At this point, the selected call will be separated from the main
Conference Call and private conversation between you and the
selected member is possible.
While in a Conference Call, you will have the option to add new
calls to the Conference Call or separate one of the members from
the Conference Call.
To re-join all the parties again, select Conference Call from
the “In-Call” menu.
Adding a New Call
There are a number of different ways to add new calls to the
Conference Call:
•
•
•
•
Using the digit keys.
Using the Make New Call option from the “In-Call” menu.
Recalling a Phone Book Entry using Quick Access
Answer Call Waiting.
English
Making and Receiving Phone Calls
28
zap.bk : usephone.fm5 Page 29 Wednesday, May 6, 1998 11:12 AM
Transfer Call
Transfer Call transfers a call to another telephone. There are two
ways to transfer a call; before or after the third party is
connected.
AYou must subscribe to both Conference Call and Call Waiting
Supplementary Services to be able to use this feature.
Initiating Transfer Call Before the Third
Party is Connected
To transfer a call to another telephone, press the M key and
select Transfer Call from the “In-Call” menu. Enter the
number where the call will be transferred and press O.
Your phone will then attempt to transfer the call. The display will
show Transferring Call followed by Call
Transferred. When the call has been successfully transferred,
you will be disconnected automatically.
Initiating Transfer Call After the Third Party
is Connected
If you already have an active call and a call on hold, press the
M key and select Transfer Call from the “In-Call”
menu. Your phone will then attempt to transfer the active call to
the call on hold. The display will show Transferring Call
followed by Call Transferred. Once the call has been
successfully transferred, you will be disconnected automatically.
English
29
Making and Receiving Phone Calls
zap.bk : usephone.fm5 Page 30 Wednesday, May 6, 1998 11:12 AM
English
Making and Receiving Phone Calls
30
zap.bk : voice.fm5 Page 31 Wednesday, May 6, 1998 11:12 AM
Using VoiceNotes™
The ‘Show Time Available' option in the Messages, VoiceNotes
menu displays the amount of recording time available, see
‘Messages Menu’.
The VoiceNotes™ feature allows you to record up to 3 minutes
VoiceNote™ Storage Capacity
of personal voice messages or to record part of a phone call. This
is useful when you don't have a pen and paper to hand for
taking directions or a message. Recording is available during the
following call scenarios:
During recording, ten seconds before the recording capacity is
reached you will hear a warning tone. If you do not stop
recording within the time limit, recording will automatically stop
and a single, one second tone will be heard, accompanied by the
Storage Full message.
•
•
•
Phone idle (no calls).
Single active call (includes conference calls).
Active call plus waiting call.
Recording a VoiceNote™
Playing VoiceNotes™
To play your VoiceNotes™, select the ‘Play VoiceNotes' option in
the Messages, VoiceNotes menu or the Quick Access menu
item (}).
To record a VoiceNote™, press the Start/Stop Record button (?).
You will hear a short tone to indicate that recording has started
and the display will show the message Recordingand the
remaining recording time available.
The first VoiceNote™ will begin to play after two seconds. The
display will show VoiceNote XX playing... Go to next?
If you are recording during a call, the person you are speaking to
will hear a tone every 10 seconds to warn them that you are
recording the call.
Press C to stop playing a VoiceNote™. A message showing
the current VoiceNote™ is displayed (VoiceNote XX), together
with a prompt Go to next?. Press M to skip to the next
VoiceNote™.
ADuring the recording of an active call, only the person you are
talking to is recorded.
To stop recording a call, press the Start/Stop Record button (?) or
O; on models with a flip you can also close the flip, although
this will end the call. The display shows the message VoiceNote
XX Stored where XXis the number of the storage location.
VoiceNotes™ are stored in sequential locations.
AIf you selected ‘Play VoiceNotes' from the Quick Access Menu,
the phone will simply return to its idle state.
If you press M during playback, the message will start to
replay from the beginning. Press M twice rapidly to skip back
to the previous message.
Recording is immediately aborted with no further notification if:
Press M to play the next VoiceNote™. To skip to the next
VoiceNote™ during playback, press O.
•
you choose to accept an incoming call while you are recording
(the Call Waiting alert is played)
•
you choose to initiate a call during recording a VoiceNote™.
31
Using VoiceNotes™
English
zap.bk : voice.fm5 Page 32 Wednesday, May 6, 1998 11:12 AM
To play a VoiceNote™ stored at a specific location, press the
appropriate digit key 1 to 9.
AIt is not possible to playback VoiceNotes™ during a call.
Erasing VoiceNotes™
To erase your VoiceNotes™, select the ‘Erase All VoiceNotes'
option in the Messages, VoiceNotes menu. You will be requested
to confirm the deletion with the message Erase All
VoiceNotes - Select?. Press O to confirm the deletion.
The confirmation message VoiceNotes Erased is displayed.
AYou cannot erase individual VoiceNotes™.
English
Using VoiceNotes™
32
zap.bk : opt_menu.fm5 Page 33 Wednesday, May 6, 1998 11:12 AM
Using the Options Menu
33
Using the Options Menu
English
zap.bk : opt_menu.fm5 Page 34 Wednesday, May 6, 1998 11:12 AM
The Phone Book Menu
AIf your service provider has added their own menu, the Phone
Book menu will not be the first item in the Options menu.
English
Using the Options Menu
34
zap.bk : opt_menu.fm5 Page 35 Wednesday, May 6, 1998 11:12 AM
jWhat is the Phone Book?
You can store names and telephone numbers as entries in an
electronic 'Phone Book'. These entries are stored in the Personal
Postscripting
This allows you to make use of area codes and other prefixes
previously stored in your Phone Book when making a call.
Numbers list in your phone or SIM card's memory, and in the
1
Fixed Dial list on your SIM card. Once stored, a number can be
To use postscripting, select the Phone Book entry containing the
prefix and then simply enter the rest of the number and press
O to make the call.
quickly retrieved and dialled.
Your phone can store 100 entries and the SIM card can store up
to 155 entries in the Personal Numbers list. The number of SIM
card entries will vary depending upon the type of SIM card issued
by your Cellular Service Provider.
You can also use postscripting if you want to call a number
similar to one you have stored in your Phone Book. Retrieve the
number from the Phone Book, delete the relevant digits and then
enter the new number.
You can also store up to 40 entries in a Fixed Dialling list if you
have this feature. Fixed Dialling allows you to limit use of your
phone to particular numbers, or, if you wish, to country codes,
area codes, or other prefixes of your choosing.
APostscripting a number does not overwrite the entry in the
Phone Book.
APostscripting is not available when accessing the Phone Book
using the Smart button.
Each Phone Book entry comprises:
•
•
•
A telephone number. Up to 32 digits can be stored, but this is
reduced to 20 digits for SIM card locations.
A name. Up to 16 characters for phone locations. Up to 50
characters for SIM card locations, but typically 10 or less.
A location label - from 1 to 255 in your Personal Numbers list,
or 1 to 40 in your Fixed Dial list.
1. Availability of the Fixed Dialling feature depends on the type
of SIM card you have.
English
35
Using the Options Menu
zap.bk : opt_menu.fm5 Page 36 Wednesday, May 6, 1998 11:12 AM
Available Characters
Press the appropriate keys to get the following characters:
How to Enter Alphabetic Characters
The 0, 1,... ...,8 and 9 keys are used to enter
alphabetic characters, for example when storing names in the
Phone Book or when creating messages.
1
2
3
4
5
6
7
8
9
0
Space . 1 ? ! , Ÿ Ä & : " ( ) ' ` @ % ¡ ¢
Space . 1 ? ! , Ÿ Ä & : " ( ) ' ` @ % ¡ ¢
For example, if you press the 5 key, the first displayed
character will be J. If this is not the required character, then you
can press the same key again to show K. Another press will
display L, another... ...will display 5. Your phone will continue to
scroll through the characters available on the selected key with
each new key press.
A B C 2 [ ®
a b c 2 { ¯
¼ ¾ ©
½ ¾ ©
D E F 3 ° ¿ ¤ ²
d e f 3 ° ¥ ¤ ²
G H I 4 À §
g h i 4 À §
A long press of any of the keys will switch all the characters to
lower case, a second long press will switch back to upper case.
J K L 5 Á
j k l 5 Á
To enter the next character press the appropriate key. If,
however, the next character is on the same key as the previous
character you will first need to press the > key. Pressing the
> key a second time will produce a space.
M N O 6 ] \ « ¨ µ
m n o 6 } | ¬ ¨ µ
P Q R S 7 Â ¾ ¸
p q r s 7 Â ¾ ¸
If a mistake has been made, you can go back to the incorrect
character by pressing <.
T U V 8 ¹ ^ ¦
t u v 8 ¹ ~ ¦
Characters can be removed from the display by pressing the C
key.
W X Y Z 9 º ·
w x y z 9 º ·
The character before the cursor (Ö) is the character which will be
deleted.
+ - 0 x * / = > < #
+ - 0 x * / = > < #
Press the O key to store the information.
The top line for each key shows the upper case characters, the
lower line shows the lower case.
English
Using the Options Menu
36
zap.bk : opt_menu.fm5 Page 37 Wednesday, May 6, 1998 11:12 AM
Find Entry By Location
Location >
Personal Numbers
The Personal Numbers sub-menu is used for creating and
managing your list of personal numbers.
i
Find Entry By Name
This option is used to select a telephone number from a list of
numerically sorted Phone Book locations.
i
Press the Smart button (=) and use the volume buttons to
scroll to the stored number, or press the appropriate digit
key to skip to a particular letter. To make the call, either
hold down = for 1.5 seconds or press O.
Once selected, this option will display the message Enter
Location. You can now enter a location number. If the entered
location is not valid, a timed message Range 1-XXX will be
displayed and the phone will return to the Enter Location
menu item.
This option is used to select a telephone number from a list of
alphabetically sorted Phone Book names.
The Phone Book entries will be searched and an entry will be
displayed.
Once selected, this option will display the message Enter Name.
You can enter a maximum of three characters from a name but
you do not need to enter all three characters to begin a search.
If you enter a location number for which there is no entry,
Location Empty will be displayed and the nearest non-empty
location will be selected instead.
The Phone Book entries will be searched and the first
alphabetically matching entry will be displayed.
If you did not enter a location, the first numerical entry will be
displayed.
If there isn’t a name matching your entry, the nearest
alphabetically matching entry will be displayed.
If there are no numbers stored, No Numbers Stored will be
displayed.
If you do not enter any name information, the first alphabetical
entry will be displayed.
To display adjacent Phone Book entries use the ( and )
keys. When the desired name is displayed press the O key to
select it. The phone will now enter the 'Call Number', 'Modify
Name Or Number' or 'Erase Name And Number' options sub-
menu.
If there are no names stored, No Names Stored will be
displayed.
To display adjacent Phone Book entries use the ( and )
keys. When the desired name is displayed press the O key to
select it. The phone will now enter the 'Call Number', 'Modify
Name Or Number' or 'Erase Name And Number' options sub-
menu.
English
37
Using the Options Menu
zap.bk : opt_menu.fm5 Page 38 Wednesday, May 6, 1998 11:12 AM
Call Number, Modify Name Or Number or Erase Name
And Number Options
Once a Phone Book entry has been selected, it can be called,
modified or deleted.
Add Entry
This option is used to add (store) entries to the Phone Book. You
can choose to add the new entry to either the phone or SIM card
memory locations.
Call Number
Add To Phone Memory, Add To SIM Card Memory
This option is used to call the selected Phone Book telephone
number.
Once you have selected the destination of the new entry, you will
be asked to enter the telephone number, name and location
number of the new entry.
Modify Name Or Number
This option is used to change the selected Phone Book entry.
The last telephone number displayed will be presented by
default; it can be used or discarded as required.
The entry’s current telephone number and name will be
presented, in turn, for modification. You can accept the current
settings or modify as required.
If the entered location is not valid, a timed message Range
YYY-ZZZwill be displayed and the phone will return to the
Enter Location prompt. If the chosen location is currently
used by another entry, you will be asked for confirmation that
the location can be overwritten.
Erase Name And Number
This option is used to erase the selected Phone Book entry.
Simply press the O key when the phone displays the message
Erase Name And Number. The option will display the timed
message Erased XXX and then return to the Find Entry
menu item.
If you do not supply a location number, the next available
location will be used.
When the new entry has been entered, a timed message
Stored XXX will be displayed.
English
Using the Options Menu
38
zap.bk : opt_menu.fm5 Page 39 Wednesday, May 6, 1998 11:12 AM
Check Capacity
This option is used to check the number of free Phone Book
entries in the phone or SIM card memory areas.
Last Ten Calls
These options can be used to call the most recently used phone
numbers.
Check Phone Capacity, Check SIM Capacity
Once selected, a timed message XX Unused Locations
displays the requested information.
Once an option has been selected, use the ( and ) keys
to scroll through the list of phone numbers. Press the O key to
call the displayed number.
AYou can use postscripting to modify a number once you have
retrieved it from either of the Last Ten Calls lists.
Prevent Access
This option enables you to prevent access to the Personal
Numbers list.
Last Calls Made
This option can be used to redial the phone number of any one
of the last ten calls made.
To SIM Card Memory, To Phone Memory, To Phone &
SIM Memory, No Memory Restrictions
You can prevent access to all entries in the SIM card memory, the
phone memory or both the phone and SIM card memory. To
cancel all access restrictions use the No Memory Restrictions
option.
Last Calls Received
This option can be used to redial the phone number of any one
of the last ten calls received.
AYou will only see numbers in the Last Calls Received list if you
have Caller Line Identification.
When you change the restrictions, you will be requested to enter
the Security Code before the change is made.
Erase All Numbers
Show Services
This option displays a list of phone numbers and services
This option erases all the numbers stored in your Last Ten Calls
Made and Last Ten Calls Received lists.
provided by your Cellular Service Provider.
AThe Last Ten Calls lists will be erased when a new SIM is
inserted in the phone.
AAvailability depends on the type and settings of the SIM card,
and/or your subscription to this feature.
English
39
Using the Options Menu
zap.bk : opt_menu.fm5 Page 40 Wednesday, May 6, 1998 11:12 AM
My Phone Number(s)
Fixed Dialling
AAvailability of the Fixed Dialling menu depends on the type of
This option allows you to access your cellular phone, fax and data
numbers so that you can retrieve or modify them when required.
For example, if you have difficulty remembering your cellular
phone number, store it with the name My Phoneand then you
will be able to retrieve the number as required.
SIM card.
This feature allows you to limit use (typically third-party use) of
your phone to a predefined list of telephone numbers or, if you
wish, to a list of country codes, area codes, or other prefixes of
your choosing.
The My Phone Number(s) list is stored on your SIM card.
When you select this item, the first location will be displayed. Use
the ( and ) keys to scroll through the phone numbers
stored.
When Fixed Dialling is switched on, the only numbers that can be
dialled from your phone are those stored (or whose prefix is
stored) in the Fixed Dial list. If you attempt to dial any other
number (apart from an emergency number), the message
Restrictedwill be displayed. You will not be able to make fax
or data calls.
To enter or change a number, scroll to the location and press
O. You will be prompted to enter a phone number and then a
name. Press O to store the information.
To make a call when Fixed Dialling is switched on, either dial the
number manually, or select it from the Fixed Dial list and press
O.
ADepending on your Cellular Service Provider, you may find that
one or more of the entries in the My Phone Number(s) list will
have been defined. You may not be able to change these
predefined entries.
Up to 40 entries can be stored in the Fixed Dial list. The list is
stored on your SIM card.
! This option may be affected by the Call Barring setting.
View Fixed Dial List
This option allows you to scroll through the numbers in the Fixed
Dial list. When you find the number you want, press O to
make the call.
English
Using the Options Menu
40
zap.bk : opt_menu.fm5 Page 41 Wednesday, May 6, 1998 11:12 AM
Setup Fixed Dialling
This option allows you to switch Fixed Dialling on or off and to
enter or change entries in the Fixed Dial list.
One-Touch Dial Setting
This option allows you to specify which Phone Book list can be
One-Touch Dialled.
You will be prompted to enter your PIN2 security code when you
select this option.
To Phone Memory
Switches One-Touch Dialling to your Personal Numbers list stored
in phone memory (locations 1 to 9).
On
Switches fixed dialling on.
To SIM Memory
Off
Switches One-Touch Dialling to your Personal Numbers list stored
on your SIM card (locations 101 to 109).
Switches fixed dialling off.
To Fixed Dial list
Edit Entry
AThis option is only available if you have Fixed Dialling.
Modifies or clears an entry in the Fixed Dial list. When you select
this option, the first non-empty location in the list will be
displayed. Scroll to the entry you want to change and press O.
You will be prompted to edit the phone number and the name.
To erase the entry, press C.
Switches One-Touch Dialling to your Fixed Dial list
(locations 1 to 9).
Add Entry
Adds a phone number and name to the Fixed Dial list. When you
select this option you will be prompted to enter the phone
number, name and a location number. If you do not specify a
location number, it will be stored in the next available location.
AWhen setting up your Fixed Dial list, you may want to reserve
the first nine locations for phone numbers you wish to One-
Touch Dial. See also ‘One-Touch Dial Setting’.
Erase Entry
Erases a phone number and name from the Fixed Dial list. The
first entry in the Fixed Dial list will be displayed. Scroll to the entry
you wish to delete and press O.
English
41
Using the Options Menu
zap.bk : opt_menu.fm5 Page 42 Wednesday, May 6, 1998 11:12 AM
Call Related Features Menu
Show Battery Meter
This option displays the approximate amount of battery capacity
remaining, for example:
Number of
Segments
Approximate Charge Level
1
3
5
7
less than 5% (recharging needed)
less than 20%
less than 60%
greater than 60%
i
Display the detailed battery meter easily with the Quick
Access item (G).
English
Using the Options Menu
42
zap.bk : opt_menu.fm5 Page 43 Wednesday, May 6, 1998 11:12 AM
Restrict My Phone Number
j Call Diverting
'Restrict My Phone Number' is a network feature. You will need
to subscribe to one of the two Caller Line Identification restriction
features with your Cellular Service Provider.
Show ID On Next Call
Your phone number is sent with the next attempted call, after
this your phone number will not be sent until you re-select this
option.
Restrict ID On Next Call
Your phone number will not be sent with the next attempted
call, after this your phone number will be sent with calls until you
re-select this option.
Call diverting is a network feature. If your phone is unavailable,
or you do not wish to receive calls, incoming calls can be diverted
to other phone numbers.
This option can be used to:
•
•
Divert all incoming Voice calls unconditionally.
Divert incoming Voice calls whenever your phone is
unavailable, busy, not reachable or not answered.
•
•
•
Divert incoming Fax calls.
Divert incoming Data calls.
Reset all diversion options to off.
AYou cannot change the call divert settings when you are out
of network coverage.
English
43
Using the Options Menu
zap.bk : opt_menu.fm5 Page 44 Wednesday, May 6, 1998 11:12 AM
After selecting any of the call divert options there will be a short
delay while the phone asks the network for the current setting.
Detailed Diverting
These options will enable you to divert Voice calls to different
numbers, depending upon the current status of your phone.
Divert Voice Calls
Each of the following detailed diverting options operate in the
same way.
This option will allow you to set your phone to Divert When
Unavailable, Divert All Voice Calls or Detailed Diverting.
Each option has two settings, Onor Off.
Divert When Unavailable
If you change the setting to On, you will be asked to enter a
diversion phone number using the digit keys.
This option will enable you to divert all incoming Voice calls to a
single number, whenever your phone is unavailable.
ADetailed diversion settings are ignored while Divert All Voice
Calls or Divert When Unavailable are On.
The option has two settings, Onor Off.
If you change the setting to On, you will be asked to enter a
diversion phone number using the digit keys.
If Busy
This option will divert incoming calls if your phone is busy.
ASetting “Divert When Unavailable” to On will have the same
effect as setting all “Detailed Diverting” options to On.
If Not Reachable
AWhen On, Divert When Unavailable takes priority over detailed
diversion settings.
This option will divert incoming calls if your phone cannot be
contacted by the network.
Divert All Voice Calls
If No Answer
This option will enable you to unconditionally divert all incoming
Voice calls to a single number.
This option will divert incoming calls if you do not answer the
call.
The option has two settings, Onor Off.
Divert Fax Calls
If you change the setting to On, you will be asked to enter a
diversion phone number using the digit keys.
This option will enable you to divert all Fax calls to a single
number.
AWhen On, Divert All Voice Calls takes priority over all other
Voice call diversion settings.
The option has two settings, Onor Off.
If you change the setting to On, you will be asked to enter a
diversion phone number using the digit keys.
i
Switch between Divert On and Off easily with the Quick
Access item (P).
English
Using the Options Menu
44
zap.bk : opt_menu.fm5 Page 45 Wednesday, May 6, 1998 11:12 AM
Divert Data Calls
AWhile a Talk and Fax call is active, incoming call services like
Call Waiting and Call Holding are suspended.
This option will enable you to divert all Data calls to a single
number.
If you receive a Talk and Fax call when:
The option has two settings, Onor Off.
•
•
Your phone is not fax-ready - you can only talk.
If you change the setting to On, you will be asked to enter a
diversion phone number using the digit keys.
Your phone is fax-ready but Talk and Fax mode is off - the call
is automatically routed to your fax (you cannot talk).
Cancel All Diverting
On
This option will enable you to cancel the diversion of incoming
calls.
Switches Talk and Fax mode on for the next and all subsequent
calls.
! This option resets all diversion settings to Offand
removes all diversion numbers.
Off
Switches Talk and Fax mode off for the next and all subsequent
calls.
Talk and Fax
This is a network feature that allows you to speak and then send
or receive a fax during the course of a single call.
AYour phone supports a data and fax transmission speed of up
to 9600 bps.
Before making a Talk and Fax call, ensure that:
•
Your phone is “fax-ready” (it has been switched off,
connected to the fax with one of the optional data/fax
accessories, then switched back on). Connecting your phone
to the fax in the middle of the call will not work.
•
The Talk and Fax mode is set to On.
A Talk and Fax call automatically switches to fax mode when you
start sending the fax. While the fax is being transmitted, the
message Fax in progress will be displayed. The call
automatically ends when the fax transmission is complete. You
cannot switch back to voice mode in the same call.
English
45
Using the Options Menu
zap.bk : opt_menu.fm5 Page 46 Wednesday, May 6, 1998 11:12 AM
Int'l Calls
j Call Waiting
When selected, this option will bar outgoing international calls.
The Call Waiting menu item has two settings Onor Off. If you
select Off, you will be not be notified of waiting calls. The
person trying to contact you will either receive the busy tone, or
be diverted by the ‘Detailed Diverting - If Busy’
option.
Int'l Calls Except Home
When selected, this option will bar outgoing international calls,
except those to your home country.
All Calls
If Call Waiting is On, you will be notified of a waiting call by an
audible alert and by the message Call Waiting - Answer?.
You can press the O key to accept the waiting call, or use the
M key to scroll to an alternative option and then press O.
When selected, this option will bar all outgoing calls, except
emergency calls.
Off
When selected, this option will disable all call barring for
outgoing calls.
AIf you have Caller Line Identification, the caller’s number or
name is displayed instead of the Call Waiting message.
Bar Incoming Calls
AAvailability of this feature depends on your service provider.
After selecting this option, there will be a short delay while the
phone asks the network for the current setting.
j Call Barring
Call barring is a network feature which can be used to selectively
bar outgoing and incoming calls.
When Roaming
When selected, this option will bar incoming calls when you are
roaming.
If you change the barring setting, you may be asked to enter your
barring password. There will be a short delay while the phone
notifies the network of the new setting. When the change has
been made by the network, the phone will display a confirmation
message.
You may wish to select this option, as some Cellular Service
Providers charge an additional fee for receiving calls when you
are roaming.
All Calls
The initial password will be supplied to you by your Cellular
Service Provider when you subscribe to this service.
When selected, this option will bar all incoming calls.
AThis option may be affected by the Fixed Dialling setting.
Off
When selected, this option will disable all call barring for
incoming calls.
Bar Outgoing Calls
After selecting this option, there will be a short delay while the
phone asks the network for the current setting.
English
Using the Options Menu
46
zap.bk : opt_menu.fm5 Page 47 Wednesday, May 6, 1998 11:12 AM
Cancel All Barring
This option can be used to set all Call Barring options to Off.
Change Bar Password
This option can be used to change the call barring password.
After selecting this option, you will be asked to enter the current
password.
You will then be asked to enter, and then re-enter, your new, 4
digit, barring password. When the change has been made by the
network, the phone will display a confirmation message.
Key Answer Only
AThis option is only available if you have a phone with a flip.
This feature has two options: Onor Off.
When set to On, this feature allows the flip to be opened without
answering an incoming call. The call can be answered by pressing
an appropriate key (O, 0 to 9, < or >). To reject
the call press C.
When set to Off, opening the flip answers an incoming call.
English
47
Using the Options Menu
zap.bk : opt_menu.fm5 Page 48 Wednesday, May 6, 1998 11:12 AM
Messages Menu
SMS Messages
These are text messages that are sent specifically to and from
your phone number.
When an SMS message is received, your phone:
1
Makes three short alert tones (depending on the ‘Ring or
Vibrate’ setting).
2
3
Displays the o (messages) icon.
Stores the message for later viewing, if there is space. If there
is not enough space, the o icon will flash. One or more
messages must be removed before the message can be
stored.
Your Cellular Service Provider will transmit a message for a
limited amount of time. If a memory location is not made
available before the message is removed from the network, then
you will not be able to receive or read it.
4 Messagewill then be displayed with the prompt; Read Now?
5
6
7
8
If O is pressed, the phone will enter the Received Messages
browser and immediately display the new message.
If C is pressed the phone will return to the screen which
was displayed prior to receipt of the message.
If any other key is pressed it will perform the function linked
with that key.
If no key is pressed the display will time-out after 1 minute
and return to the screen which was displayed prior to receipt
of the message.
Your phone supports the two GSM message features: Short
Message Services (SMS) and Cell Broadcast.
English
Using the Options Menu
48
zap.bk : opt_menu.fm5 Page 49 Wednesday, May 6, 1998 11:12 AM
Cell Broadcast Messages
These are general messages, broadcast to a group of phones and
can only be received when your phone is in standby mode.
How to Create and Edit SMS Messages
Use the Message Editor to create or modify text messages. When
you enter the editor, the last message that was edited will be
displayed. Press and hold C to clear the message and start a
new one, or modify the message displayed. For an explanation of
how to enter text, see ‘How to Enter Alphabetic Characters’ .
These messages are broadcast in numbered 'channels' and, in
general, each channel will tend to carry one particular type of
information.
Press O once you have completed your message. You will then
be presented with the following options:
Typical cell broadcast channels could have information on local
weather conditions, traffic reports or stock market prices. Please
contact your network operator for a list of available channels and
the information they supply.
Send Message - If you select this option you will be
prompted for a phone number, enter the number and then
press O to send the message.
When the message has scrolled across the display, the beginning
of the message will be shown until you either remove it or a new
message arrives.
Store Message - Select this option to store your edited
message in your Outgoing Messages list.
AIf you don’t store the message after it has been edited, you
will lose all your changes as soon as you select another
message to be edited.
How to Read SMS Messages
You can use the scroll keys (M, ( and )) to scroll
through messages in either the Received Messages or Outgoing
Messages lists.
j Call Voicemail
This option will make a call to the current voicemail number.
To display a specific message, enter the message number, for
example press 5 to display the 5th message. If the message
does not exist, Invalid Msg Number will be displayed.
The voicemail number is entered using the ‘Voicemail Number’
option in the Message Settings menu.
Alternatively, to display the next message, press O and select
Go To Next Message.
j Received Messages
This option is used to view and manage any SMS messages that
have been sent to your phone number.
When selected, this option will display a message indicating the
total number of messages and how many of these are new. If
there are no messages No Messages will be displayed.
English
49
Using the Options Menu
zap.bk : opt_menu.fm5 Page 50 Wednesday, May 6, 1998 11:12 AM
If there are messages, the new messages will be displayed first,
Outgoing Messages
followed by the old. Repeated presses of the M key will
display the whole message, when it was sent and the phone
number who sent it (if available).
This option is used to view and manage any outgoing messages.
These messages will be stored on your SIM card. When you select
this option, the total number of messages will be displayed
followed by the first message in the list.
Once you have read a new message it will automatically become
old.
AYou cannot send an outgoing message until the Message
Service Centre number has been set. See ‘Message Settings’.
See ‘How to Read SMS Messages’ for more information on
navigating through the messages.
Press the O key, when viewing any message, to enter the
‘Send Message‘, ‘Edit Message’, ‘Delete Message’ and ‘Go to
Next Message’ sub-menu. See ‘How to Read SMS Messages’ for
more information on navigating through the messages.
Press the O key, when viewing any message, to enter the
‘Delete Message’, ‘Return Call’, ‘Edit Message’ and ‘Go to Next
Message’ sub-menu.
Delete Message
Send Message
This option will delete the currently viewed message
If you select this option you will be prompted for a phone
number, enter the number and then press O to send the
message.
Return Call
This option can be used to call the person who sent you the
message, if their number has been included by the network, or a
number that has been included in quotes “” in the message.
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
or store it in your Outgoing Messages list. See ‘How to Create
and Edit SMS Messages’ for more information on using the
Message Editor.
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
and/or store it in your Outgoing Messages list. See ‘How to
Create and Edit SMS Messages’ for more information on using
the Message Editor.
Delete Message
This option will delete the currently viewed message.
Go to Next Message
Go to Next Message
This option will display the next received message.
This option will display the next outgoing message.
If you are currently reading the last message in your list then this
option will take you back to the top of the list.
English
Using the Options Menu
50
zap.bk : opt_menu.fm5 Page 51 Wednesday, May 6, 1998 11:12 AM
Message Editor
Cell Broadcast
This option is used to set the cell broadcast settings. The option
has two settings Onor Off.
The Message Editor is used to edit the currently selected message
and then to either send the modified message or store it in your
Outgoing Messages list. See ‘How to Create and Edit SMS
Messages’ for more information on using the Message Editor.
If you change the setting to On, you will be asked to enter the
channel you wish to receive information from.
Please contact your Cellular Service Provider for a list of available
channels and the information they provide.
VoiceNotes
The VoiceNotes™ feature allows you to record a number of
personal voice messages or to record conversations during a
phone call.See Using VoiceNotes™ for more information.
While a broadcast message is scrolling across the display you can
stop and start it by pressing <. Press > to restart the
message from the beginning. If you want to remove the message
from the display, press C.
Play VoiceNotes
This option allows you to play your VoiceNotes™. Press (
and ) to scroll through the VoiceNotes™. Press O while a
VoiceNote™ is playing to go to the next VoiceNote™.
AIf you need to use the < and > keys for their normal
functions while you are receiving a cell broadcast message,
you must first remove the message.
Show Time Available
This option displays the amount of time available for you to
record your VoiceNotes™.
Erase All VoiceNotes
This option allows you to delete all your VoiceNotes™.
English
51
Using the Options Menu
zap.bk : opt_menu.fm5 Page 52 Wednesday, May 6, 1998 11:12 AM
Outgoing Message Type
Message Settings
This option is network dependent and can be used to specify the
format of your outgoing messages. You can select from the
following message types: Text(default), Fax, X400, Paging,
E-Mail, ERMESor Voice.
Voicemail Number
This option is used to enter a phone number which will be used
by the ‘Call Voicemail’ option.
If there is already a Voicemail Number, this will be shown in the
display. This can be used, modified or deleted as desired.
AYou do not need to select Voiceto send messages to
Voicemail boxes.
Service Centre
Before you can send any messages you must use this option to
enter your Message Service Centre number. This number is
obtained from your Cellular Service Provider.
If there is already a Message Service Centre number, this will be
shown in the display. This can be used, modified or deleted as
desired.
Expiry Period
You can use this option to specify the maximum time, in hours,
that your unforwarded messages are to remain with the Message
Service Centre before being deleted. When you select this option,
the current expiry period will be displayed (the default is 24
hours).
The maximum value you can enter is 10584, though the real limit
will depend on your Message Service Centre.
English
Using the Options Menu
52
zap.bk : opt_menu.fm5 Page 53 Wednesday, May 6, 1998 11:12 AM
Phone Setup Menu
Select Phone Line
This option allows you to switch between Line 1 and Line 2.
AAvailability depends on the type and settings of the SIM card,
and/or your subscription to this feature.
Adjust Ring Volume
This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the side of
your phone.
i
Press E followed by the appropriate volume button to
either increase or decrease the ringer volume.
English
53
Using the Options Menu
zap.bk : opt_menu.fm5 Page 54 Wednesday, May 6, 1998 11:12 AM
j Ring or Vibrate
This option sets the way your phone alerts you to an incoming
j Set Ringer Tone 2
This option sets the tone your phone will make when an
call. The options are:
incoming call is received on Line 2.
• Ring Only - the phone will ring with the tone specified by
AThis option will not appear if you do not subscribe to Line 2.
the Set Ringer Tone option.
j Phone Lock
This option is used to set, and change, the unlock code.
• Vibrate Only - the phone will vibrate using VibraCall™.
• Vibrate Then Ring - the phone will vibrate twice and then
ring.
The unlock code can be set to protect your phone from
unauthorised use. It can be set to automatically lock your phone
each time it is switched on.
• No Ring or Vibrate - the phone will just display the Call
message.
The unlock code is a four digit number which is set at
manufacture to 1234. This can be changed at any time by using
the 'change unlock code' option.
AThe setting you choose also defines the type of alert for an
incoming SMS message (except that if you select Vibrate Then
Ring, your phone will just vibrate).
Automatic Lock
j Set Ringer Tone
This option sets the tone your phone will make when an
This option can be used to automatically lock your phone each
time it is switched on. The option has two settings, Onor Off.
incoming call is received on Line 1.
Lock Now
Standard Tone
Your phone makes a standard ringing tone.
This option can be used to immediately lock your phone. Once
selected, your phone will be unusable until the unlock code is
entered.
Single Ring Tone - Music Tone
Change Unlock Code
This option is used to change the unlock code.
When selected, your phone will produce one of these alternative
ringer tones.
AIf you select the Single Ring Tone option, the phone will only
ring once when a call is received.
After selecting this option, you will be asked to enter the current
security code before you can proceed.
You can now enter a four digit code to replace the old code.
ABy pressing the M key, you can access this option even
when the phone is locked.
English
Using the Options Menu
54
zap.bk : opt_menu.fm5 Page 55 Wednesday, May 6, 1998 11:12 AM
The new PIN code must contain four to eight digits.
Require SIM Card PIN
! If this operation is performed incorrectly 10 times in a
This option is used to set, and change, the PIN code.
row, your SIM card will become permanently blocked.
The PIN code can be set to protect your SIM card from
unauthorised use. If set to On, access to your SIM card will be
restricted each time it is inserted or the phone is turned on.
Change SIM PIN2 Code
This option is used to change your PIN2 security code.
The option has two settings, Onor Off.
When you select this option you must enter the old PIN2 security
code before you can proceed.
AIf the SIM card does not support PIN code disabling, these
items will not appear.
You will be asked to enter a new, four to eight digit code to
replace the old PIN2 security code. The new PIN2 security code
must be entered again as confirmation.
Change SIM PIN Code
This option is used to change the SIM card PIN code.
! If the PIN2 security code is entered incorrectly three
times in a row, the Blockedmessage will be displayed.
The 'Require SIM Card PIN' option must be set to Onand you
must enter the old PIN code before you can proceed.
When the Blockedmessage is displayed, you are not allowed
access to menu items that require you to enter the PIN2 code, for
example ‘Setup Fixed Dialling’ and ‘Call Charge Settings’.
You will be asked to enter a new, four to eight digit code to
replace the old PIN code. The new PIN code must be entered
again as confirmation.
If you receive the Blockedmessage when you try to enter your
PIN2 code, you will need to unblock and change the code using
the following key sequence:
! If the PIN number is entered incorrectly three times in a
row, your SIM card will automatically lock-up and the
Blockedmessage will be displayed.
< < 0 5 2 <Unblock Code O
New PIN2 Code O New PIN2 Code O
Unblocking Your Phone
If you receive the Blockedmessage you will need to enter an
unblock code and key sequence before you can use the phone.
AThe 8-digit unblocking code will have been provided with your
SIM card by your Cellular Service Provider.
AThe 8 digit PIN unblocking code will have been provided with
your SIM card by your Cellular Service Provider.
! If the PIN2 unblocking operation is performed
incorrectly 10 times in a row, your PIN2 code will
become permanently blocked.
Enter the following key sequence to unblock your phone:
< < 0 5 < Unblock Code O
New Pin Code O New Pin Code O
English
55
Using the Options Menu
zap.bk : opt_menu.fm5 Page 56 Wednesday, May 6, 1998 11:12 AM
j New Security Code
The security code is used to control access to security and other
options within the menus.
j Set Time and Date
This option is used to set the time and date. You will be
prompted to Enter Time- the time must be entered in 24-hour
format. You will then be prompted to Enter Date.
This option is used to change the security code, which is set at
manufacture to 000000.
j Set Time Format
This option is used to set the clock to either 12-hour or 24-hour
format.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new, six digit code to replace
the old security code.
j Language Selection
This option is used to change the language for display messages.
AIn order to safeguard your phone, you should change your
security code from the factory setting as soon as possible.
The option has multiple settings.
When you select a language, all further display prompts and help
messages will be in the selected language.
j Extended Menus
i
Press and hold M. Extended Menus will be temporarily
activated until you exit the Options menu.
Battery Saving Mode
This option can help you to conserve battery power. Also known
as DTX (Discontinuous Transmission), this feature will cause your
phone to operate at reduced power when you are not talking.
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings, Onor Off.
j Select Keypad Tones
The option has two settings, Onor Off.
This option allows you to change or disable tones you hear when
you press a key.
Show Time and Date
When selected, this option displays the time and date until any
key is pressed.
The option has three settings, Normal Tones, Single Tone
or No Tones.
English
Using the Options Menu
56
zap.bk : opt_menu.fm5 Page 57 Wednesday, May 6, 1998 11:12 AM
Master Clear
Phone Status
! This option should be used with extreme caution, for
example it will clear all the Phone Book entries from
your phone memory.
Status Review
This option can be used to view the current setting of menu
options.
This option is used to restore certain phone options to their
original settings.
When selected, your phone will display a list of menu items
which have been changed from the default setting. Press the
M key to view the next item.
When selected, you will be asked to enter the security code.
Once entered, the master clear option will perform the same
operations as 'Master Reset', plus the following operations:
Master Reset
! This option should be used with caution.
•
Clear the Phone Book entries from phone memory (not from
SIM memory)
This option is used to restore certain phone options to their
original settings.
•
•
•
Clear the Last Calls Made and Last Calls received list
Clear the Message Editor
When selected, you will be asked to enter the security code.
Once entered, the master reset option will perform the following
operations:
Reset the Resettable Call Timers.
Master Clear does not clear the:
•
Cancel Automatic Answer, Audible Call Timers, In-Call Display
Meter, Battery Save (DTX), Auxiliary Alert, Automatic
Handsfree, Automatic Lock, Cell Broadcast and Talk and Fax
Mode.
•
•
•
•
•
•
•
Fixed Dial list
My Number(s) list
Charge Meters
•
•
Return Language Selection to Original.
Received and Outgoing Messages list
Voicemail number
Restore Keypad Tones to Normal, Ringer Tones to Standard,
Volume Level to Medium and Network Search frequency to
Medium.
SMS Service Centre number
Lifetime timer.
•
•
Restore Extended Menus to their default settings.
Erase all recorded VoiceNotes™.
English
57
Using the Options Menu
zap.bk : opt_menu.fm5 Page 58 Wednesday, May 6, 1998 11:12 AM
Network Selection Menu
Network Selection
In order for the phone to make and receive phone calls, it must
register with one of the available networks. These can be either
GSM900, GSM1800 or combined GSM900/1800 types of
network, depending on the appropriate version of the 900 Series
product.
Your phone automatically searches for the last network used. If,
for any reason, this network is unavailable, your phone will
attempt to register with a new network.
When your phone needs to register with a new network, it will
generate a sorted list of networks.The network list is sorted in the
following order:
•
•
•
The Home network.
Networks from a preferred list.
A random list of other networks found above a certain signal
strength.
•
All remaining networks in descending order of signal strength.
Any forbidden networks, stored in the SIM card, will not be
included in the sorted list.
English
Using the Options Menu
58
zap.bk : opt_menu.fm5 Page 59 Wednesday, May 6, 1998 11:12 AM
If registration is unsuccessful with one network in the list, your
Available Networks
phone will try the next listed network. If your phone fails to
register with any of the listed networks, it will start at the
beginning of the list after a preset period. The preset period is
determined by the 'Frequency Of Search' option.
When selected, this option will scan to see which networks are
operating in your current location. When the scan is complete,
press the M key to scroll through the list. When you see a
network you wish to register with or store in your preferred list,
press the O key. You will now enter the 'Register Now' and
'Make Preferred' sub-menu.
Manual Search Mode
In the manual mode, the phone will present you with the sorted
list of networks. Use the (, ) and O keys to select one
network from the list. Your phone will try to register with the
selected network. If this is successful, the phone will display the
network name and then enter the standby mode.
Register Now
Once selected, your phone will try to register with the selected
network. If the registration fails, your phone will try to register in
the normal way.
If registration is unsuccessful, your phone will present the list
again after a preset period. The preset period is determined by
the 'Frequency Of Search' option.
Make Preferred
Once selected, you will be asked where the selected network is to
be located in the preferred list.
Frequency Of Search
Network Search
These options determine how often your phone tries to register
with a network and how the attempt is made.
This option is used to determine how long your phone waits
before attempting to re-register after a registration attempt has
failed.
Registration Preferences
The option has the following settings: Slow Search, Medium
Search, Fast Search or Continuous Search.
This option determines how the phone tries to register with a
network.
! Fast and Continuous Search may use up a significant
amount of battery power.
The option has two settings, Automatic Search or Manual
Search.
Automatic Search Mode
In the automatic mode, the phone will try to register with the
first network in the sorted list. If this is successful, your phone will
display the network name and then enter the standby mode.
English
59
Using the Options Menu
zap.bk : opt_menu.fm5 Page 60 Wednesday, May 6, 1998 11:12 AM
Show List Of Networks
j Preferred Networks
This option is used to display the networks you have stored in
your preferred list. In addition, pressing the O key will select
the currently displayed entry and enter a move/delete sub-menu.
Add Network To List
This option enables you to add networks to your preferred list.
When selected, the 'Choose From Available' option will scan to
see which networks are operating in your current location. When
the scan is complete, press the M key to scroll through the
list. When you see a network you wish to store in your preferred
list, press the O key. You will be asked where the selected
network is to be located in the preferred list.
When 'Move to New Location' is selected you will be asked to
enter a new location for the selected network.
When selected, 'Delete Selection' will remove the selected
network from the preferred list.
Find New Network
The 'Choose From Known' option will, when selected, present
you with a preset list of networks. Press the M key to scroll
through the list. When you see a network you wish to store in
your preferred list, press the O key. You will be asked where
the selected network is to be located in the preferred list.
When selected, the phone will try to register with a network in
the normal manner, with one exception. When the registration
attempt is made, your current network will be excluded from the
list of those available. If the attempt fails, your phone will then try
to re-register with the previous network.
Select the 'Add New Network Code' option to enter network
codes directly. Once entered, you will be asked where the
network is to be located in the preferred list.
English
Using the Options Menu
60
zap.bk : opt_menu.fm5 Page 61 Wednesday, May 6, 1998 11:12 AM
Call Meters Menu
Call Metering
Your phone has an internal metering system which can be used
to provide you with individual and total call times or costs.
ACall cost information is only available if you receive the Advice
of Charge service. If you do not receive this service, then only
time meters are available.
The meter can be displayed during a phone call and audible
tones can be generated to indicate the passage of call time.
Your phone can handle values up to 21 digits long, although
during calls it can only display the last 12 digits. If the value
exceeds 21 digits, then Too Large is displayed.
In addition, you can set a maximum charge limit so that your
phone will monitor either the number of units used or the call
cost, and then not allow the limit to be exceeded.
Show Call Charges
This feature allows you to display the cost of your calls or the
amount of credit remaining. The figures are in phone units or
currency depending on the setting of the Set Charge Type
option.
AShow Call Charges is only available if you receive the Advice of
Charge service.
Show Last Call
Displays the cost of your last chargeable call.
English
61
Using the Options Menu
zap.bk : opt_menu.fm5 Page 62 Wednesday, May 6, 1998 11:12 AM
Total For All Calls
Displays the cost of all your chargeable calls since the charge
meters were reset to zero using the ‘Reset Call Charges’ option.
j Set Audible Call Timers
Your phone provides two programmable audible call timers:
•
•
The 'Single Alert Timer' will sound a beep just once during a
call, after a preset time has elapsed.
Credit Remaining
Displays the difference between your total call costs and the limit
specified by the ‘Set Total Charge Limit’ option. If there is no
limit, No Charge Limit Set will be displayed.
The 'Repetitive Timer' will sound regular beeps during a call,
at preset intervals.
In both cases, the timers will sound their beeps ten seconds
before the end of the programmed time.
Show Call Timers
This feature allows you to display the duration of your calls and
to reset your time meters to zero.
Set In-Call Display
This feature allows you to specify whether the time or charge
meters are displayed during a call. If you do not have the Advice
of Charge service, then only the time meter is available.
If you receive the Advice of Charge service then all calls are
timed. If you do not receive the Advice of Charge service then,
depending on the model, either all calls or only outgoing calls are
timed.
AIf a total charge limit has been set, then the in-call display
always shows your remaining credit.
Show Last Call
Displays the duration of your last call.
Show Time Per Call
This option is used to display the time meter during calls. If you
receive the Advice of Charge service, only the chargeable calls
will be displayed.
Total For All Calls
Displays the duration of all your calls since the time meter was
reset to zero using the ‘Reset All Timers’ option.
Show Charge Per Call, Show Total Call Charges
Reset All Timers
Sets the resettable time meters to zero. The Lifetime Meter is not
resettable.
AThese menu items are only available if you receive the Advice
of Charge service.
These options are used to display the call charges meter during
and after chargeable calls. The meter shows phone units or
currency depending on the setting of the ‘Set Charge Type’
option.
English
Using the Options Menu
62
zap.bk : opt_menu.fm5 Page 63 Wednesday, May 6, 1998 11:12 AM
No In-Call Display
Once the limit is reached the Total Charge Limit will need to be
reset or switched off before any chargeable calls can be made.
Select Offto switch off the charge limit.
Set Charge Type
This option defines whether charge information is displayed as
either phone units or currency.
This option switches off in-call display of the charge/time meter.
Call Charge Settings
This feature allows you to customise your Advice of Charge
settings. You will be prompted to enter your PIN2 security code
before you can access the options.
Units
AThis menu item is only available if you receive the Advice of
Charge service.
Sets the charge type to phone units.
Reset Call Charges
Currency
This option resets your charge meters to zero.
Sets the charge type to currency. You will be prompted to enter
the Currency Name. Enter a 3-character notation, for example
GBP for the UK, DEM for Germany or FFR for France. You will
then be prompted for the Charge Per Unit. Enter the amount
and press O.
Set Total Charge Limit
This option sets the maximum limit for call charges; once this
limit has been reached, the network will refuse any further
chargeable calls.
Lifetime Timer
This option is used to display the total time of all calls made on
your phone.
If you switch the charge limit On, you will be prompted to enter a
new limit. Enter the amount as either units or currency
depending on the setting of the Set Charge Type option.
Units must be entered as whole numbers.
This meter can not be reset, the Reset All Timers, Master
Resetor Master Clear options have no effect.
AWhen the charge limit is On, you will not be able to make fax
or data calls.
Once a limit is set, the in-call display will show the remaining
credit. When you reach your last two minutes, the warning
message Approaching Charge Limit will be displayed and a
warning alert will sound. The sound will be repeated when one
minute remains. When the limit is reached the message Charge
Limit Reached will be displayed and you will not be able to
make any more chargeable calls.
English
63
Using the Options Menu
zap.bk : opt_menu.fm5 Page 64 Wednesday, May 6, 1998 11:12 AM
Accessory Setup Menu
Your phone can also be linked to external microphones and
speakers for hands free operation, and provides several options
to complement the use of car kits.
j Mute Car Radio
This option can be used to mute your car radio when you make,
or receive, a call when your phone is attached to the car kit. It
must be enabled by your local dealer.
This option has two settings, Onor Off.
AThis option will have no effect if your car radio does not have
a mute feature, or if the car kit installation does not support
this option.
Automatic Answer
This option allows your phone to automatically answer an
incoming call after two rings.
This option has two settings, Onor Off.
AIf this option is On, we recommend that the 'Ring or Vibrate'
option be set to Ring Only.
†
‡
Only this option will be displayed when the headset accessory
is attached.
Automatic Handsfree
Availability depends on the type of car kit installed.
This option is used in conjunction with the 'Automatic Answer'
option and a car kit, to transfer call conversation to external
microphones and speakers. It is available only with selected car
kits. Contact your Motorola representative for further details.
You will only be able to access this menu when your phone is
mounted in a car kit or when a headset accessory is attached.
Car kits can provide charging facilities and some provide
connection to an external antenna for better reception.
This option has two settings, Onor Off.
English
Using the Options Menu
64
zap.bk : opt_menu.fm5 Page 65 Wednesday, May 6, 1998 11:12 AM
Safety Timer
This option can be used to keep the phone on for a set period
after the vehicle ignition has been turned off. This prevents the
vehicle's battery from becoming drained and saves you from
having to re-enter PIN and Unlock codes after every short stop.
As standard the 'Safety Timer' is set to 60 minutes. Once
selected, this option can be adjusted to any value between zero
and 999 minutes. When set to zero, this option is effectively
switched off.
Auxiliary Alert
This option allows your phone to alert you of an incoming call by
flashing your vehicle lights, or by sounding the horn. It must be
enabled by your local dealer.
ASome local regulations prevent the use of this option and,
accordingly, this option may not be present on your phone.
English
65
Using the Options Menu
zap.bk : opt_menu.fm5 Page 66 Wednesday, May 6, 1998 11:12 AM
English
Using the Options Menu
66
zap.bk : qkaccess.fm5 Page 67 Wednesday, May 6, 1998 11:12 AM
Using the Quick Access Menu
Although the features in your phone are available through easy
access menus, some of the most commonly used features are
also available in the Quick Access menu. Each feature in the
menu is allocated a number from 1 to 9.
To use a Quick Access feature, press the quick access key (E)
followed by the number of the feature, or press ( or ) to
scroll through the menu and then press O.
You can change the features, and the positions of the features,
available in the Quick Access menu - see ‘Customising the Quick
Access Menu’.
Each Quick Access feature is represented by an icon as well as the
feature name. The currently selected icon is shown with a dark
background.
B Find Name?
You will be prompted to Enter Name. Enter the first three
characters of the name and press O. The first matching entry
in the Phone Book will be displayed. Press O to call the
number.
D Find Location?
You will be prompted to Enter Location. Enter the location
number and press O. The first matching entry in the Phone
Book will be displayed. Press O to call the number.
AThe menu shown above represents the default setting
supplied with your phone.
67
Using the Quick Access Menu
English
zap.bk : qkaccess.fm5 Page 68 Wednesday, May 6, 1998 11:12 AM
more information.
F Add to Phone?
You will be prompted to enter a phone number and then a
name.
J Mute Phone?
Temporarily turns the microphone off during a phone call.
Reselect this option to resume your conversation.
AIf you already had a number displayed, it will automatically be
re-displayed when you select this feature.
N Adjust Ring?
This option is used to display and to set the incoming call ring
tone volume.
The number will be stored in the next available phone memory
location. See ‘Add Entry’ for more information.
T Add to SIM?
You will be prompted to enter a phone number and then a
L Vibrate On/Off?
VibraCall™ will be switched either on or off depending on the
current setting. If VibraCall™ is switched on, the ‘Ring or Vibrate’
setting changes to Vibrate Only. If VibraCall is switched off,
the ‘Ring or Vibrate’ setting changes to Ringer Only. See ‘j
Ring or Vibrate’ for more information.
name.
AIf you already had a number displayed, it will automatically be
re-displayed when you select this feature.
The number will be stored in the next available SIM card location.
See ‘Add Entry’ for more information.
V Switch Memory?
Switches one-touch dialling between the phone and SIM
memories depending on the current setting.
R Call Voicemail?
Your phone will make a call to your voicemail number.
AYou must have defined a Voicemail number in order to use
this feature.
K Read Messages?
Your newest message will be displayed; you can then read,
delete and edit messages as normal. See ‘Received Messages’ for
more information.
See ‘Call Voicemail’ for more information.
G Battery Meter?
A bar graph indicating the approximate battery charge level will
be displayed. The more bars displayed, the greater the charge
level.
U Outgoing SMS?
Your newest message will be displayed; you can then read, send,
delete and edit messages as normal. See ‘Outgoing Messages’
for more information.
See ‘Show Battery Meter’ for more information.
H Lock Now?
Immediately locks your phone, you will not be able to use your
phone until the unlock code is entered. See ‘Phone Lock’ for
a Message Editor?
The last message that was edited will be displayed. Press and
English
Using the Quick Access Menu
68
zap.bk : qkaccess.fm5 Page 69 Wednesday, May 6, 1998 11:12 AM
hold C to clear the message and start a new one, or modify
the message displayed. See ‘How to Create and Edit SMS
Messages’ for more information.
Disables open-flip answering. To answer the call, press a key.
d Switch Line 1/2?
AAvailability depends on the type and settings of the SIM card,
W Received Calls?
and/or your subscription to this feature.
Displays the first entry in the Last Calls Received list. You can
scroll through the list and call the numbers as normal. See ‘Last
Calls Received’ for more information.
Allows you to switch between Line 1 and Line 2.
e Show Services?
AAvailability depends on the type and settings of the SIM card,
and/or your subscription to this feature.
X Call Charge?
Displays the cost of your last chargeable call. See ‘Show Call
Charges’ for more information.
Displays a list of phone numbers and services provided by your
Cellular Service Provider.
Y Call Timer?
Displays the duration of your last chargeable call. See ‘Show Call
Timers’ for more information.
} Play VoiceNotes?
Plays the recorded VoiceNotes™. See Using VoiceNotes™ for
more information.
Z Talk and Fax?
Switches Talk and Fax on for the next call only. See ‘Talk and Fax’
P Divert On/Off?
Unconditional voice call diversion will be switched either on or off
depending on the current setting. This will allow Fax and Data
diversion to remain enabled independent of the Voice Call
Diversion setting.
for more information.
b Show My ID?
Your phone number will be sent with the next attempted call;
after this your phone number will not be sent until you reselect
this option.
AYou must have defined a diversion number using the ‘Divert
All Voice Calls’ option in the Call Diverting menu in order to
use this feature.
c Restrict My ID?
Your phone number will not be sent with the next attempted
call; after this your phone number will be sent until you reselect
this option.
AYou cannot switch call diverting on or off if you are outside
network coverage.
^ Key Answer Only?
AThis option is only available if you have a phone with a flip.
English
69
Using the Quick Access Menu
zap.bk : qkaccess.fm5 Page 70 Wednesday, May 6, 1998 11:12 AM
Customising the Quick Access Menu
You can change the features in the Quick Access menu to suit
your personal preferences.
•
•
•
•
•
•
•
•
•
•
Outgoing Messages
Message Editor
Last Calls Received
Last Call Charge
Last Call Timer
To customise the menu:
1
2
Press E and scroll to the menu item you wish to change.
Press and hold O to access the list of features available. The
currently selected feature will be displayed.
Talk and Fax
3
Scroll through the list until you find the feature you wish to
Show My ID Next Call
Restrict My ID
store in the Quick Access menu; press O.
4 Completed will be displayed to confirm that the feature has
been stored.
1
Key Answer Only
2
Switch Line 1/2
The items in the Quick Access list will appear in the following
order:
2
•
•
•
Show Services
•
•
•
•
•
•
•
•
•
•
•
•
Find by Name
Play VoiceNotes
Find by Location
Add Entry to Phone
Add Entry to SIM
Call Voicemail
Divert All Voice Calls
Battery Meter
Phone Lock Now
Phone Mute On or Off
Ring Volume
VibraCall On or Off
Switch Memory
Read Messages
1. Only on phones with a flip
2. Availability depends on the type and settings of the SIM card,
and/or your subscription to this feature.
English
Using the Quick Access Menu
70
zap.bk : access.fm5 Page 71 Wednesday, May 6, 1998 11:12 AM
Accessories
The following accessories have been designed to work with your
US Adapter Plug (SYN4657)
phone. Additional accessories may be available and are packaged
separately. Please refer to your local service provider or retail
outlet for more information.
The US Adapter Plug connects the power adapter to a US mains
power outlet. This plug can also be used in the Philippines.
Indian Adapter Plug (SYN4696)
The Indian Adapter Plug connects the power adapter to an Indian
mains power outlet. This plug can also be used in Pakistan and
Bangladesh.
Desktop Charger (SPN4523)
The Desktop Charger allows you to charge a battery fitted in a
phone and a spare battery at the same time. The charging status
for each battery is indicated by LEDs at the front of the charger.
Cigarette Lighter Adapter (SYN4241)
AThe Desktop Charger must be used with the Power Adapter
(SPN4278).
The Cigarette Lighter Adapter connects to your phone and allows
you to charge your phone's battery while driving. When the
phone is in use, the adapter overrides the battery therefore
preserving battery life. The adapter also provides dead battery
operation.
Power Adapter (SPN4278)
The Power Adapter (charger) connects to the Desktop Charger or
directly to the phone. When connected directly to the phone, it
charges the battery and also provides dead battery operation.
PC Cards
The Power Adapter requires an appropriate Adapter Plug.
+
CELLect™1 (S6112)
UK Adapter Plug (SYN4656)
The UK Adapter Plug connects the Power Adapter to a UK-style
mains power outlet.
CELLect™3 (CD1176 - UK Version)
Both PC Cards allow you to send and receive data and fax calls
using your phone and a computer with a PCMCIA Type II slot.
Both PC cards also allow you to manage your phone book and
send SMS messages direct from your PC with the supplied
software.
European Adapter Plug (SYN4655)
The European Adapter Plug connects the Power Adapter to a
Continental European-style mains power outlet.
The CELLect™3 card also contains a landline modem for
connection to the conventional telephone network. This gives
you both wired and wireless connection options in a single PC
card.
Aust/NZ Adapter Plug (SYN4694)
The Australia/New Zealand Adapter Plug connects the power
adapter to a Australian/New Zealand mains power outlet.
AA cable, SKN4821, is required to connect the PC Cards to the
900 Series phones.
71
Accessories
English
zap.bk : access.fm5 Page 72 Wednesday, May 6, 1998 11:12 AM
Smart CELLect™ Intelligent Data Cable
(CD1310)
Vehicle Handsfree System
There are two types of Vehicle Handsfree System for the 900
series:
Allows you to send and receive data and fax calls using your
phone and a computer with a simple RS232 connection.
•
•
Standard Vehicle Handsfree System (S8142)
The supplied software allows you to manage your phone book
and send SMS messages direct from your PC.
Advanced Vehicle Handsfree System with Voice Recognition
(S8141)
Both systems include a phone holder and battery charger, and
provide handsfree operation. The Advanced Vehicle Handsfree
System also includes the facility to store up to 20 names and
numbers that can be called using voice commands.
Personal Handsfree System (SYN6919)
The Personal Handsfree System comes with earphones and a
throat microphone and allows you to use your phone handsfree.
Leather Holster (SYN6913)
The Leather Holster holds the phone while being worn on your
belt.
! A dual-band antenna should be specified when
installing a Vehicle Handsfree System for use with dual-
band models of the 900 Series.
AThese accessories require professional installation.
Plastic Holster (SHN6851)
The Plastic Holster holds the phone while being worn on your
belt.
AYour phone must be inserted into the plastic holster correctly
for maximum protection; see the diagrams below for
directions.
English
Accessories
72
zap.bk : notes.fm5 Page 73 Wednesday, May 6, 1998 11:12 AM
What to do if...
You can’t switch your phone on
You can’t make calls
Check the battery. Is it charged, properly fitted and are the contacts clean and dry? See ‘Important Battery
Information’.
Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in
a building, move closer to a window.
Check the Network Selection settings. Try Manual Selection, or try another network. See ‘Network Search’.
Check your Operator coverage map.
Is Restricted displayed? Check the Call Barring and Fixed Dialling settings.
Has the call charge limit been reached? Use your PIN2 code to reset the limit or contact your Service
Provider. See ‘Set Total Charge Limit’.
Has a new SIM card been inserted? Check that no new restrictions have been imposed.
You can’t receive calls
Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in
a building, move closer to a window.
Check the Call Diversion and Call Barring settings.
Check the Ringer and VibraCall™ settings. If both are off, there is no audible alert. See ‘j Ring or Vibrate’.
Have you inserted a new SIM card? Enter the new PIN code. See ‘Entering Your SIM Card PIN Code’.
Do you have a replacement phone? Enter the default phone unlock code - 1234.
Your phone won’t unlock
Have you forgotten the unlock code? Press M to change the unlock code (you will need your security
code).
Your PIN is blocked
Enter the PIN unblocking code supplied with your SIM card (see ‘Unblocking Your Phone’).
Enter the PIN2 unblocking code supplied with your SIM card (see ‘Change SIM PIN2 Code’).
Is the card inserted the right way round? See ‘SIM Card Insertion/Removal’.
Your PIN2 is blocked
Your SIM card won’t work
Is the gold chip visibly damaged or scratched? Return the card to your Service Provider.
Check the SIM contacts. If they are dirty, clean them with an antistatic cloth.
73
What to do if...
English
zap.bk : notes.fm5 Page 74 Wednesday, May 6, 1998 11:12 AM
The battery won’t charge
Check the charger. Is it properly connected? Are its contacts clean and dry? See ‘Your Battery’.
Check the battery contacts. Are they clean and dry?
Check the battery temperature. If it is warm, let it cool before recharging.
Is it an old battery? Battery performance will decline after several years use. Replace the battery.
Are you in an area of variable coverage? This uses extra battery power.
The battery drains faster than
normal
Is it a new battery? A new battery will need two to three charge/discharge cycles to attain normal
performance. See ‘Charging a New Battery’
Is it an old battery? Battery performance will decline after several years use. Replace the battery.
Is it a battery that hasn’t been completely discharged? Allow the battery to fully discharge (until the phone
turns itself off) and then charge the battery overnight.
Check that the Frequency Of Search feature in the Network Selection menu has not been set to Fastor
Continuous. See ‘Network Search’.
Check that the Battery Saving Mode feature has not been set to Off.
Are you using your phone in extreme temperatures? At extreme hot or cold temperatures, battery
performance is significantly reduced.
You can’t cancel Call Diverting
or Call Barring
Wait until you are in an area with good network coverage and try again.
There is not enough memory available to store another SMS message. Use the Messages menu to delete
one or more existing messages.
The o symbol is flashing
I can’t make international calls
Some Service Providers automatically bar the ability to make international calls. Contact your Service
Provider.
Have you included the relevant codes? Press and hold the 0 key to display the international dialling
prefix (+) and then enter the appropriate country code followed by the phone number.
English
What to do if...
74
zap.bk : zap.IX Page 75 Wednesday, May 6, 1998 11:12 AM
Index
Buttons
Conference Call ...................................26
Call Waiting ....................................29
End Active And Held ........................26
Hold Call .........................................25
Make a New Call .............................25
Reconnect .......................................26
Reconnect Held Call ........................26
Restrict My Number .........................25
Split Call ..........................................26
Switch .............................................26
A
Smart button ...................................13
Start/Stop Record ............................14
Volume ...........................................13
Accessories ..........................................71
Accessory setup menu ..........................64
Add entry
To phone memory ....................38, 68
To SIM card memory .................38, 68
Adjust ring volume ...............................53
Automatic answer ................................64
Automatic Handsfree ...........................64
Automatic lock .....................................54
Automatic redial ..................................22
Auxiliary alert .......................................65
Available networks ...............................59
C
Call charge settings ..............................63
Call diverting ................................. 43, 68
Call holding .................................. 26, 46
Call metering .......................................61
Call meters menu .................................61
Call related features menu ...................42
D
Call timers ............................................62 Data calls
Call Transfer .........................................29
Accessories ......................................72
Call Voicemail ......................................49 Delete
B
Call Waiting .........................................25
Call waiting ..........................................26
Calling a number .................................22
Last ten calls ....................................39
Message ..........................................50
Phone book entries ..........................38
Bar incoming calls ................................46
Bar outgoing calls ................................46
Batteries
Cancel all diverting ........................ 45, 68 Desktop charging of your battery .........18
Charging .........................................15
Desktop charging ............................18
Fitting ..............................................17
Low battery warning ........................16
Maintaining .....................................16
Removing ........................................16
Battery charge indicator .......................14
Battery meter ................................42, 68
Battery saving mode .............................56
Blocked message ...........................21, 55
Capacity Detailed diverting .................................44
Checking battery capacity ................42 Dialling phone book numbers ..............23
Checking Phone Book capacity ........39 Display .................................................14
Cell broadcast ......................................51 Display characters ................................36
Messages ........................................49 Displaying your own phone number .....40
Change bar password ..........................47 Divert
Change SIM PIN2 code .........................55
Change unlock code ............................54
Cancelling .......................................45
Fax calls ...........................................45
Characters ...........................................36 DTX .....................................................56
Charge meters
Resetting .........................................63
Check capacity (of the Phone Book) .....39
75
Index
English
zap.bk : zap.IX Page 76 Wednesday, May 6, 1998 11:12 AM
Messages
Call holding/call waiting messages ...27
E
K
Editing messages ................................. 49 Key Answer Only ..................................47
Emergency calls ................................... 24
Cell broadcast messages ..................49
Creating and editing ........................49
Reading SMS messages ...................49
Sending SMS messages ...................50
Messages menu ............................47, 48
My phone number(s) ............................40
L
Ending a phone call ............................. 24
Language selection ...............................56
Last ten calls ..................................39, 69
Lifetime timer .......................................63
Lock now ......................................54, 68
Low battery warning ............................16
Entering characters .............................. 36
Erase name and number ...................... 38
Extended menus ..............................5, 56
F
N
Names
Fault finding ........................................ 73
Fax calls
M
Entering ..........................................36
Network search ....................................59
Network selection menu ......................58
Networks
Automatic search .............................59
Finding new networks .....................60
Manual search .................................59
New security code ................................56
Making a phone call .............................22
Master clear .........................................57
Master reset .........................................57
Menus
Accessories ..................................... 72
Find entry by location ....................37, 67
Find entry by name ........................37, 67
Find new network ............................... 60
Fitting your battery .............................. 17
Fixed dialling ....................................... 40
Calling numbers ............................. 40
Setting ............................................ 41
Flip ...................................................... 13
Accessory setup menu .....................64
Call meters menu ............................61
Call related features menu ...............42
Extended menu .................................5
Messages menu ...............................48
Network selection menu ..................58
Options menu ..................................33
Personalised menus ...........................5
Phone setup menu ...........................53
Quick Access menu ..........................67
Short menu .......................................5
Message editor ..............................51, 68
Message settings ..................................52
O
One-touch dial setting ..........................41
One-touch dialling ........................23, 68
Options menu ......................................33
Outgoing messages .......................50, 68
H
Handsfree On/Off ................................ 25
Headset
Making and receiving calls .............. 13
Hold Call ............................................. 25
I
In use symbol ...................................... 14
Initiating Transfer Call ......................... 29
International phone calls ..................... 23
English
Index
76
zap.bk : zap.IX Page 77 Wednesday, May 6, 1998 11:12 AM
Short message service symbol ..............14
Show battery meter ...................... 42, 68
Show call charges ......................... 61, 69
Show call timers ............................ 62, 69
Show Services ......................................39
Show Time and Date ............................56
Signal strength symbol .........................14
SIM card
Insertion/removal .............................19
PIN code ................................... 21, 55
PIN2 code ........................................55
Smart button .......................................13
SMS messages .....................................48
Special keys .........................................13
Split Call ..............................................26
Start/Stop Record button .....................14
Status indicator ....................................15
Status review .......................................57
Switch .................................................26
Symbols ...............................................14
P
Q
Pauses
Quick access menu ...............................67
Customising ....................................70
Inserting into phone numbers ..........23
Personal numbers .................................37
Personalised menu .................................5
Phone book
R
Reading SMS messages ........................49
Received messages ...............................49
Receiving a phone call ..........................24
Recording VoiceNotes ................... 31, 51
Redialling the last number called ..........23
Removing your battery .........................16
Require SIM card PIN ............................55
Restrict My Number .............................25
Restrict my phone number ............ 43, 69
Return call ............................................50
Ring or vibrate .....................................54
Ring tones ............................................54
Call number ....................................38
Capacity ..........................................35
Deleting/erasing entries ...................38
Dialling phone book numbers ..........23
Modify name or number ..................38
Preventing access to ........................39
Storing numbers - see Add Entry ......38
Phone calls
Automatic redial ..............................22
Dialling phone book numbers ..........23
Emergency calls ...............................24
Ending .............................................24
International ....................................23
Making ............................................22
One-touch dialling ...........................23
Receiving .........................................24
Phone setup menu ...............................53
Phone status ........................................57
PIN code
S
Safety timer .........................................65
Security code
T
Changing ........................................56
Select Phone Line .................................53
Sending SMS messages ........................50
Service centre .......................................52
Set in-call display ..................................62
Set Ringer Tone ....................................54
Set Ringer Tone 2 .................................54
Set Time and Date ................................56
Set Time Format ...................................56
Setup fixed dialling ...............................41
Short menu ............................................5
Talk and fax .................................. 45, 69
Timers ..................................................62
Tones
Setting ringer tones .........................54
Transfer Call ........................................29
Transmission rate .................................45
Troubleshooting ...................................73
Turn Mute On or Off ............................26
Entering ..........................................21
Setting and changing ......................55
PIN2 code ............................................55
Postscripting ........................................35
Prevent access (to Phone Book) ............39
English
77
Index
zap.bk : zap.IX Page 78 Wednesday, May 6, 1998 11:12 AM
U
Unblocking your phone ....................... 55
Unconditional call diversion ................. 69
Unlock code
Setting and changing ...................... 54
V
VibraCall .......................................54, 68
Voicemail
Number .......................................... 52
VoiceNotes ....................................31, 51
Recording .................................14, 31
Volume
Adjusting the earpiece and keypad
volume ......................................... 13
Adjusting the ringer volume ............ 53
Buttons ........................................... 13
W
What to do if... ................................... 73
English
Index
78
zap.bk : bcover.fm5 Page 65 Wednesday, May 6, 1998 11:12 AM
zap.bk : bcover.fm5 Page 66 Wednesday, May 6, 1998 11:12 AM
68P09402A74
|