ENGLISH
USER GUIDE
U X 39 0
Please read this manual carefully before operating your mobile
phone. Retain it for future reference.
(
)
P/N: MMBB0183101 1.0
G
IMPORTANT SAFETY PRECAUTIONS
Read these instructions. Breaking the rules may be dangerous or illegal.
Further detailed information is given in this user guide.
WARNING! Violation of the instructions may cause serious injury or death.
1. Never use an unapproved battery since this could damage the phone and/or battery and could
cause the battery to explode.
2. Never place your phone in a microwave oven as it will cause the battery to explode.
3. Never store your phone in temperatures less than -4°F or greater than 122°F.
4. Do not dispose of your battery by fire or with hazardous or flammable materials.
5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If
wireless equipment is improperly installed and the air bag is deployed, you may be seriously
injured.
6. Do not use a hand-held phone while driving.
7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)
1
IMPORTANT SAFETY PRECAUTIONS
1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high
humidity, such as a bathroom.
2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean
your phone. This could cause a fire.
3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the
phone.
4. Do not use your phone in high explosive areas as the phone may generate sparks.
5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if
it is loose as it may cause a fire or electric shock.
6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as
it may cause electric shock or fire.
7. Do not handle the phone with wet hands while it is being charged. It may cause an electric
shock or seriously damage your phone.
8. Do not disassemble the phone.
2
1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or
cause electric shock or fire.
2. Do not hold or let the antenna come in contact with your body during a call.
3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the
battery. This could cause a fire.
4. Store the battery out of reach of children.
5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection
parts of the phone, etc.) This could cause asphxiation or suffocation resulting in serious injury
or death.
6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.
7. Only use the batteries and chargers provided by LG. The warranty will not be applied to
products provided by other suppliers.
8. Only authorized personnel should service the phone and its accessories. Faulty installation or
service may result in accidents and consequently invalidate the warranty.
9. An emergency call can be made only within a service area. For an emergency call, make sure that
you are within a service area and that the phone is turned on.
3
TABLE OF CONTENTS
Battery Charge Level
17
Important Safety Precautions1
Entering and Editing
Information
22
Turning the Phone On and Off
Turning the Phone On
Turning the Phone Off
Signal Strength
17
17
17
17
18
Table of Contents
4
Text Input
22
22
Key Functions
Welcome
9
Text Input Examples
23
23
23
Screen Icons
Using Abc (Multi-tap) Text Input
Using T9 Mode Text Input
Making Calls
19
19
Technical Details
10
Correcting Dialing Mistakes
Using the NEXT Key (In T9 Mode) 24
Adding Words to the T9 Database 24
FCC RF Exposure Information
11
QRueidcikalinAgcCcaellsss to Convenient19
Phone Overview
12
Receiving Calls
19
Contacts in Your Phone’s
Memory
25
Menus Overview
14
Features
20
The Basics of Storing Contacts
Entries
25
Manner Mode
Lock Mode
20
20
20
20
21
21
21
Getting Started with Your
Phone
16
Options to Customize Your
Contacts
26
26
26
27
27
Mute Function
Volume Quick Adjustment
Call Waiting
Menu Access
16
Adding or Changing the Group
The Battery
16
16
16
Changing the Call Ringer
Installing the Battery
Removing the Battery
Changing the Message Ringer
Adding or Changing the Memo
Caller ID
Charging the Battery
17
Speed Dialing
Adding or Changing the Picture ID 27
4
Adding Speed Dial
28
Searching by Letter
Searching Options
33
33
4. Erase Calls
5. Call Timer
6. KB Counter
40
40
41
Editing Contacts Entries
Adding Another Phone Number
From standby mode
28
28
28
28
29
29
29
29
30
Making a Call From Your Phone’s
Memory
34
34
From Contacts
Through Contacts
Messages
42
From Recent Calls (
Speed Dialing
as a hot key)35
35
Default Numbers
1. Voice Mail
43
Changing the Default Number
Editing Stored Phone Numbers
Editing Stored Names
2. New Text Msg
44
Prepending a Stored Number
35
The Basics of Sending a
Text Message
Contacts
36
44
Editing Customized Options
Customizing the Text Message Using
Options
1. List Contacts
2. New Number
3. New E-mail
4. Groups
36
Deleting
30
44
37
37
37
38
38
Deleting a Phone Number from a
Using Contacts to Send a
Contact
30
Text Message
45
45
46
Deleting a Contact Entry
30
Text Options
Additional Ways to Delete a Contact 31
Message Icon Reference
5. Speed Dials
6. My Contact Info
Deleting a Speed Dial
31
3. New Photo Msg
4. Inbox
46
47
49
50
50
Phone Numbers With Pauses
31
32
Storing a Number with Pauses
Recent Calls
39
5. Outbox
Adding a Pause to an Existing
1. Dialed Calls
39
Number
32
6. Saved
2. Received Calls
3. Missed Calls
40
40
Searching Your Phone’s Memory 33
7. Msg Settings
Scrolling Through Your Contacts
33
5
TABLE OF CONTENTS
SM
7.1 Auto Save
50
50
50
50
50
51
51
51
51
51
51
Incoming SpeedTalk (Barge) 55
Tools
62
SM
7.2 Auto Erase
1. Schedule
62
Incoming SpeedTalk (Alert) 55
7.3 Photo-Auto Receive
7.4 Callback #
SM
2. Alarm Clock
3. Voice Memo
4. My Shortcut
5. Notepad
63
64
64
64
65
65
66
Incoming SpeedTalk (Group) 56
SM
1. SpeedTalk Contacts
56
7.5 Signature
SM
2. New SpeedTalk Contact 57
7.6 Voice Mail #
7.7 Text Auto View
7.8 Entry Mode
SM
3. New SpeedTalk Group
57
57
57
SM
6. Ez Tip Calc
7. Calculator
4. Recent SpeedTalk
SM
5. SpeedTalk Settings
7.9 Insert Quick-Text
7.0 Text Auto Play (On/ Off)
8. Erase All
SM
8. World Clock
5.1 SpeedTalk On/Off
57
58
58
5.2 Speaker On/Off
Settings
67
SM
5.3 SpeedTalk Alert Tone
SM
1. Sounds
67
SpeedTalk
52
SM
SM
easyedge
59
1.1 Ringers
67
67
68
68
Call from SpeedTalk Contact
List (Barge)
53
1. easyedge
60
1.2 Key Tone
1.3 Volume
SM
Call from SpeedTalk Contact
2. Help
60
List (Alert)
53
1.4 Message Alerts
Media
61
SM
Call from SpeedTalk Contact
1.5 Service Alerts
1.5.1 Service Change
1.5.2 Minute Beep
68
68
68
1. Images
61
List (Group)
54
54
2. Sounds
61
Call from Keypad (Barge)
6
1.5.3 Call Connect
1.5.4 Back To Top
68
68
3.1 Select System
3.2 Set NAM
72
72
72
72
73
5.8 Airplane Mode
76
6. Data Settings
77
1.6 Power On/Off Tone
1.7 DTMF Length
2. Display
69
69
69
3.3 Auto NAM
3.4 Serving System
4. Security
6.1 PC Connection
77
7. Voice Services
77
7.1 Voice Commands
7.2 Sound Modes
7.3 Announce Alerts
7.4 Best Match
7.5 Train Words
7.6 Help
77
78
78
78
79
79
79
2.1 Banner
69
4.1 Lock Phone
4.2 Restrict Calls
4.3 Emergency #s
4.4 Change Lock
4.5 Erase Contacts
4.6 Reset Default
5. Call Setup
73
73
74
74
74
74
75
2.2 Backlight
2.2.1 LCD
69
69
70
2.2.2 Key Light Timer
2.3 Screens
70
70
70
70
71
2.4 Menu Style
8. Location
2.5 Clocks
Phone Info
80
2.6 Theme Colors
5.1 Auto Retry
75
75
75
75
76
76
76
1. My Phone Number
80
2.7 Contrast
5.2 Answer Call
5.3 Auto Answer
5.4 One-Touch Dial
5.5 Voice Privacy
5.6 Auto Volume
5.7 TTY Mode
2.8 Fonts
71
71
71
2. S/W Version
3. Icon Glossary
4. Shortcut Help
80
80
80
2.8.1 Calling Digits
2.8.2 Text Editor
2.9 Language
2.0 Power Saver
3. System
71
72
72
7
TABLE OF CONTENTS
Aircraft
83
83
84
FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless
Safety
81
Blasting Areas
TIA Safety Information
81
Devices
97
Potentially Explosive Atmosphere
Exposure to Radio Frequency Signal 81
For Vehicles Equipped with an
Accessories
100
Antenna Care
81
81
82
82
82
82
82
83
83
83
83
83
Air Bag
84
Phone Operation
Tips on Efficient Operation
Driving
Safety Information
84
Limited Warranty Statement 101
Charger and Adapter Safety
Battery Information and Care
84
84
Electronic Devices
Index
104
Explosion, Shock, and Fire Hazards 85
Pacemakers
General Notice
85
86
Persons with pacemakers:
Avoid damage to your hearing
Hearing Aids
FDA Consumer Update
10 Driver Safety Tips
87
Other Medical Devices
Health Care Facilities
Vehicles
94
Consumer Information on
SAR
96
Posted Facilities
Some of contents in this user guide maybe different from your phone
depending on the software of the phone or your service provider. Features
and specifications might be subject to change without prior notice.
8
WELCOME
Thank you for choosing the advanced and compact
UX390 cellular phone, designed to operate with the
latest digital mobile communication technology, Code
Division Multiple Access (CDMA) and Advanced
Mobile Phone Service (AMPS). Along with the many
advanced features of the CDMA system, such as
significantly enhanced voice clarity, this phone offers:
Important Information
This user’s guide provides important information on
the use and operation of your phone. Please read all
the information carefully prior to using the phone for
the best performance and to prevent any damage to
or misuse of the phone. Any unapproved changes or
modifications will void your warranty.
SM
●
SpeedTalk Capability.
FCC Part 15 Class B Compliance
●
Large, easy-to-read, 9-line backlit LCD with status
This device and its accessories comply with part 15 of
FCC rules. Operation is subject to the following two
conditions: (1) This device and its accessories may not
cause harmful interference, and (2) this device and its
accessories must accept any interference received,
including interference that causes undesired operation.
icons
●
Paging, messaging, voice mail, and caller ID.
●
22-key keypad.
●
Speakerphone feature.
●
Menu-driven interface with prompts for easy
Technical Details
operation and configuration.
The UX390 is an a tri-mode phone that operates on
●
Any key answer, auto answer, auto retry, one-touch
both (Code Division Multiple Access CDMA)
and speed dialing with 99 memory locations.
frequencies: cellular services at 800 MHz and (Personal
Communication Services PCS) at 1.9 Ghz. Also, the
UX390 works on Advanced Mobile Phone Service. We
call it a tri-mode phone. Since the phone operates on
Cellular, PCS and AMPS, the call fail rate is less than on
a conventional dual-mode or singlemode phone.
●
Bilingual (English and Spanish) capabilities.
●
Advanced Voice Recognition.
●
Animated Wallpaper in Standby Mode.
9
TECCDMHA tNechnIoClogyAusLes aDfeatEureTcaAlledIDLSSSS
CDMA Standard Designator
Description
(Direct Sequence Spread Spectrum) that enables
the phone to keep communication from being
crossed and to use one frequency channel by
multiple users in the same specific area. This
results in a 10-fold capacity increase when
CDMA Tri-Mode Air Interface
14.4kbps radio link protocol and
inter-band operations
TIA/EIA-95A
TSB-74
Basic Air
Interface
ANSI J-STD-008
IS-95 adapted for PCS frequency
band cdma2000 1xRTT AirInterface
Advanced Mobile Phone Service
TIA/EIA-IS2000
ANSI TIA/EIA 553A
compared with analog mode. In addition, features
such as soft / softer handoff, hard Handoff, and
dynamic RF power control technologies combine
to reduce call interruptions.
TIA/EIA/IS-634
MAS-BS
TIA/EIA/IS/651
PCSC-RS
Network
TIA/EIA/IS-41-C
Intersystem operations
Non-signaling data comm.
TIA/EIA/IS-124
The Cellular and PCS CDMA networks consist
of MSO (Mobile Switching Office), BSC (Base
Station Controller), BTS (Base Station
TIA/EIA/IS-96-B Speech CODEC
TIA/EIA/IS-99
TIA/EIA/IS-637
TIA/EIA/IS-657
IS-801
Async Data and Fax
Short message service
Packet Data
Transmission System), and MS (Mobile Station).
Service
Position Determination
TIA/EIA/IS-707-A Service (gpsOne)
* TSB-74: Protocol between an IS-95A system
and ANSI J-STD-008
High Speed Packet Data
1xRTT system receives twice as many
TIA/EIA/IS-97
TIA/EIA/IS-98
ANSI J-STD-018
ANSI J-STD-019
TIA/EIA/IS-125
Cellular base station
subscribers in the wireless section as IS-95. Its
battery life is twice as long as IS-95. High-
speed data transmission is also possible.
Cellular mobile station
PCS personal station
PCS base station
Performance
Speech CODEC
The following table lists some major CDMA
standards.
10
FCC RF Exposure Information
components should not be used. Avoid the use of
accessories that cannot maintain 0.6 inches (1.5 cm)
distance between the user’s body and the back of the
WARNING! Read this information before operating
the phone.
phone and have not been tested for compliance with
FCC RF exposure limits.
In August 1996, the Federal Communications
Commission (FCC) of the United States, with its action in
Report and Order FCC 96-326, adopted an updated
Vehicle-Mounted External Antenna
(Optional, if available.)
safety standard for human exposure to Radio Frequency
(RF) electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the
safety standard previously set by both U.S. and
international standards bodies.
A minimum distance of 8 inches (20cm) must be
maintained between the user / bystander and the
vehicle-mounted external antenna to satisfy FCC RF
exposure requirements. For more information about
RF exposure, visit the FCC website at www.fcc.gov.
The design of this phone complies with the FCC
guidelines and these international standards.
Caution
Bodily Contact During Operation
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair
call quality, damage the phone, void your warranty
and/or result in violation of FCC regulations.
This device was tested for typical use with the back
of the phone kept 0.6 inches (1.5 cm) from the
body. To comply with FCC RF exposure requirements,
a minimum separation distance of 0.6 inches (1.5 cm)
must be maintained between the user’s body and the
back of the phone, including the antenna, whether
extended or retracted. Third-party belt-clips, holsters,
and similar accessories containing metallic
Do not use the phone with a damaged antenna. If a
damaged antenna comes into contact with the skin a
minor burn may result. Contact your local dealer for
a replacement antenna.
11
PHONE OVERVIEW
1. Detach the earphone cap
Earpiece
using the crack with your
nail toward right.
2. Swivel the cap downward.
3. Plug in the earphone into
the earphone jack.
LCD Screen
Flip
Earphone Jack
SM
Navigation Keys
Right Soft Key
SpeedTalk Key
Left Soft Key
SEND Key
Side Keys
BACK Key
Speaker Key
END/PWR Key
Voice Commands Key
Manner Mode Key
Alphanumeric Keypad
Lock Mode Key
Microphone
Charger port
12
Earpiece Lets you hear the caller.
Speaker Key Use to turn speakerphone on/off on
the right side of the phone.
LCD Screen Displays messages and indicator icons.
END/PWR Key Use to turn the power on/off and to
end a call. Also use to return to the main menu
display screen.
Flip Open the case to answer an incoming call and
close to end the call.
Left Soft Key Use to display the function setting
Alphanumeric Keypad Use to enter numbers and
menu.
characters and select menu items.
SEND Key Use to place or answer calls.
Lock Mode Key Use in standby mode to set the lock
Side Keys Use to adjust the ringer volume in standby
function by pressing and holding the key
about 3 seconds.
for
mode and the earpiece volume during a call.
BACK Key Press to delete a single space or character.
Press and hold to delete entire words. Press this key
once in a menu to go back one level.
Microphone Lets callers hear you.
Earphone Jack Use to plug the earphone to let you
hear callers.
Voice Commands Key Use for access to Voice
SM
SM
SpeedTalk Key Press to use the SpeedTalk
Commands and Voice Memo.
Function.
Manner Mode Key Use to set the Manner Mode
Charger port Connects the charger to the phone.
(from standby mode press and hold
for about
3 seconds).
Navigation Key Use for quick access to Messages,
My Speaker on, Axcess Apps. and Mobile Web.
Right Soft Key Use to select an action within a
menu.
13
MENUS OVERVI2E. HWome Calls
SM
5. Signature
6. Voice Mail #
7. Text Auto View
8. Entry Mode
9. Insert Quick-Text
0. Text Auto Play
8. Erase All
Contacts
SpeedTalk
3. Roam Calls
4. All Calls
1. List Contacts
2. New Number
3. New E-mail
4. Groups
1. ST Contacts
2. New ST Contact
3. New ST Group
4. Recent ST
6. KB Counter
1. Received
2. Transmitted
3. Total
5. Speed Dials
6. My Contact Info
5. ST Settings
1. ST On/Off
1. Inbox
2. Speaker On/Off
2. Outbox
3. ST Alert Tone
Messages
3. Saved
Recent Calls
1. Voice Mail
2. New Text Msg
3. New Photo Msg
4. Inbox
4. All
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Erase Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. All Calls
SM
easyedge
SM
1. easyedge
2. Help
Media
5. Outbox
6. Saved
7. Msg Settings
1. Auto Save
2. Auto Erase
3. Photo-Auto Receive
4. Callback #
1. Images
2. Sounds
5. Call Timer
1. Last Call
14
3. System
6. Data Settings
1. PC Connection
7. Voice Services
1. Voice Commands
2. Sound Modes
3. Announce Alerts
4. Best Match
5. Train Words
6. Help
Tools
Settings
1. Select System
1. Schedule
1. Sounds
2. Set NAM
2. Alarm Clock
1. Alarm 1
1. Ringers
3. Auto NAM
4. Serving System
2. Key Tone
2. Alarm 2
3. Volume
4. Security
3. Alarm 3
4. Message Alerts
5. Service Alerts
6. Power On/Off Tone
7. DTMF Length
1. Lock Phone
2. Restrict Calls
3. Emergency #s
4. Change Lock
5. Erase Contacts
6. Reset Default
5. Call Setup
4. Quick Alarm
3. Voice Memo
4. My Shortcut
5. Notepad
8. Location
2. Display
6. Ez Tip Calc
7. Calculator
8. World Clock
1. Banner
2. Backlight
3. Screens
Phone Info
1. My Phone Number
1. Auto Retry
4. Menu Style
2. S/W Version
2. Answer Call
3. Auto Answer
4. One-Touch Dial
5. Voice Privacy
6. Auto Volume
7. TTY Mode
5. Clocks
3. Icon Glossary
4. Shortcut Help
6. Theme Colors
7. Contrast
8. Fonts
9. Language
0. Power Saver
15
GETTING STARTED WITH YOUR PHONE
Menu Access
The Battery
Note
Press Left Soft Key Menu to access nine phone
menus. There are two methods of accessing menus
and submenus:
It is important to fully charge the battery before initial use
of the phone.
●
Use the navigation key to highlight and select, or
●
Press the number key that corresponds to the
The phone comes with a rechargeable battery. Keep
menu (or submenu).
the battery charged while not in use in order to
maximize talk and standby time. The battery charge
level is shown at the top of the LCD screen.
For example:
1. Press Left Soft Key Menu to display nine menu
items.
Installing the Battery
Use
to scroll through the list of menus.
To install the battery, insert the battery into the
opening on the back of the phone. Put the battery
cover on the battery and push it slightly upwards.
2. Press the appropriate number key corresponding
to the menu item you want to select.
The sub-menu list will be displayed.
Removing the Battery
3. Press the appropriate number key corresponding
to the sub-menu you want to access.
Turn the power off. Push down slightly. Pull the
battery cover downward and remove it. Then remove
the battery by pressing the upper area of it.
4. Use
to highlight your preferred setting, then
to select it.
press
Note
Press
to go back one step (while accessing a menu or
selecting a setting). Changes to settings will not be saved.
16
Charging the Battery
Turning the Phone On and Off
Turning the Phone On
To use the charger provided with your phone:
1. Install a charged battery or connect the phone to
an external power source such as a cigarette lighter
charger or hands-free car kit.
Warning! Use only the charger provided with the
phone. Using any charger other than the one included
with the UX390 may damage your phone or battery.
1. Plug the end of the adapter into the phone’s
charger port and the other end into an electrical
outlet. (See the illustration on page 12.)
2. Press
for about 3 seconds until the LCD
screen lights up.
Note
2. The charge time varies depending upon the
battery level.
Like any other radio device, avoid contact with the
antenna while your phone is on.
Battery Charge Level
Turning the Phone Off
The battery charge level is shown at the top right of
the LCD screen. When the battery charge level
1. Press and hold
until the display turns off.
becomes low, the low battery sensor alerts you in
three ways: sounding an audible tone, blinking the
Signal Strength
battery icon, and displaying Low Battery. If the
battery charge level becomes exceedingly low, the
phone automatically switches off and any function in
progress is not saved.
Call quality depends on the signal strength in your
area. The signal strength is indicated on the screen
as the number of bars next to the signal strength
icon: The more bars, the better the signal strength. If
the signal quality is poor, move to an open area. If
you are in a building, the reception may be better
Fully Charged
Empty
17
GETTING STARTED WITH YOUR PHONE
Screen Icons
When the phone is on, the top line of the LCD screen displays phone status icons. To see the icon glossary, go
to Menu -> Phone Info -> Icon Glossary on your phone.
Signal strength indicator. The strength of the signal received by the phone is indicated by the number of bars
displayed.
Battery Strength. Indicates battery charge level.
In call state indicator. A call is in progress. * No icon indicates the phone is in Main Menu Screen.
No service indicator. The phone is not receiving a system signal.
New Messages.
New voice mails indicator.
New Msgs & Voice.
Manner Mode.
Silence All.
Alarm.
Digital indicator
Analog indicator
.
.
SSL.
TTY.
Location on mode.
1x Data Active\.
Driving mode.
Announce alerts.
E911 only mode.
Airplane Mode.
Announce mode.
Speaker On.
Roaming.
IS-2000.
SM
SpeedTalk On.
18
Making Calls
Correcting Dialing Mistakes
If you make a mistake while dialing a number, press
1. Make sure the phone is turned on. If not, press
for about 3 seconds.
once to erase the last digit entered, or hold
down
for at least 2 seconds to go to the
2. Enter the phone number (include the area code if
needed).
standby mode.
3. Press
.
Redialing Calls
lf the phone is locked, enter the lock code.
1. Press
twice to redial the last number you
dialed. The last 30 numbers are stored in the call
history list and you can also select one of these to
redial.
Call Failed - indicates the call did not go through.
Restricted - indicates outgoing calls are in
restricted mode.
Receiving Calls
Note
1. When the phone rings or vibrates, press
to
If the phone is restricted, you can only dial phone
numbers saved in the Emergency Numbers or your
Contacts. To turn off this function: Menu ->
answer.
Note
Settings ->
Security -> Enter Lock
Code ->
Restrict Calls -> Off -> OK (The default
If you press
or
(the side keys) while the phone is
lock code is the last 4 digits of your phone number.)
ringing, the ringing or vibration is muted for that call.
4. Press
to end the call.
2. Press
twice to end the call.
19
QUICK ACCESS TO CONVENIENT FEATURES
Manner Mode
Mute Function
The Mute Function doesn’t transmit your voice to the
caller. To quickly activate Mute press Left Soft Key
[Mute], then to cancel press Left Soft Key
[Unmute].
Sets the phone to vibrate instead of ring (
is
displayed). To quickly set Manner Mode press and
hold
hold
. To return to Normal Mode, press and
.
Note
Lock Mode
The Mute Key is activated during a call.
Sets your phone to require your 4-digit password in
order to use the phone.
Volume Quick Adjustment
Note
Use the side keys to adjust the earpiece and ringer
volumes. The upper key increases the volume and the
lower key decreases the volume.
Until you change it, the lock code/password is the last 4
digits of your phone number.
●
Earpiece volume can be adjusted during a call.
To quickly lock your phone press
for three
Ringer volume can be adjusted during a call.
seconds. To cancel, press Right Soft Key [Unlock]
Note
and enter the password.
Key Beep volume is adjusted through the Sounds Volume
(Menu -> 8 -> 1 -> 3 -> 3).
20
Dialing Single Digit Speed Dials (from 2 to 9)
Press and hold the Speed Dial number.
OR
Call Waiting
Your cellular service may offer call waiting. While a
call is in progress, two beeps indicate another
incoming call. When call waiting is enabled, you may
Enter the speed dial number and press
.
put the active call on hold while you answer the
other incoming call. Check with your service provider
for information about this function.
Dialing Double Digit Speed Dials (from 10 to 99)
Press the first digit and then press and hold the
key of the last digit.
1. Press
to receive a waiting call.
2. Press
again to switch between calls.
OR
Caller ID
Enter the first and second digits and press
.
Caller ID displays the phone number or name of the
incoming call. If the caller’s identity is stored in Contacts,
the name appears with the number. Check with your
service provider to ensure they offer this feature.
Speed Dialing
Speed dialing is a convenient feature that allows you
to make phone calls quickly and easily with a few
keystrokes. Your phone recalls the number from your
Contacts, displays it briefly, and then dials it. Speed
Dial Number 1 is assigned to Voice Mailbox by
default, but you can change it.
21
ENTERING AND EDITING INFORMATION
Text Input
Note
You can input and edit your Banner, Schedule,
When Key Tone is changed from Beep to English or
Contacts, Notepad, and Messaging.
Spanish (Menu -> 8 -> 1 -> 2), the phone does not
announce numbers when 123 mode is in use.
Key Functions
Text Input Modes
Right Soft Key (Left Soft Key only in
Messaging):
There are five modes for entering text, numbers,
Enter the text screen to create a text message.
Press to scroll through the following text input
modes: T9Word -> Abc -> 123 -> Symbols ->
Smileys.
special characters, and punctuation. In a text entry
field, pressing Right Soft Key
list of text modes.
displays a pop-up
* Left Soft Key ( ) in Messages menu.
Shift: Press to change case.
T9 text: T9Word -> T9WORD -> T9word
Abc text: Abc -> ABC -> abc
T9Word (T9) Mode
Use to type text using one keystroke per letter. The
Next: In T9 mode, press to display other
matching words.
phone translates keystrokes into common words by using
the letters on each key and a compressed database.
Space: Press to complete a word and insert a
space.
Abc (Multi-tap) Mode
Clear: Press to delete a single space or
Use to add words to the T9 database.
character. Hold to delete the whole message.
Punctuation: In T9 mode, press to insert
123 (Numbers) Mode
punctuation in a word and complete a
sentence.
Use to type numbers using one keystroke per number.
22
Symbols Mode
Text Input Examples
Use to insert special characters or punctuation.
There are 39 special characters including “SP” which
inserts a space and “LF” which forces the text to the
next line.
Display the text modes and select a text mode:
1. In a text entry field, press Left Soft Key
display text modes.
to
2. Press
to use.
to use the text input mode you want
Smileys Mode
3. Press
to select the text input mode.
Use to insert smiley graphics. There are 40 smiley
characters.
Using Abc (Multi-tap) Text Input
Changing Letter Case
1. Press Left Soft Key
to change to Abc mode.
Using T9 and Abc text input modes you can set the
2. Press
to change to ABC Caps Lock every
capitalization. Press
to reach the following:
time for capital letters.
3. Press
.
Initial Cap (T9Word/ Abc)
LG is displayed.
Only the first letter is capitalized and subsequent
letters are lower case.
Using T9 Mode Text Input
Caps Lock (T9WORD/ ABC)
1. Press Left Soft Key
mode.
to change to T9Word
All letters are capitalized.
2. Press
.
Lower Case (T9word/ abc)
3. Press
to complete the word and add a space.
23
ENTERING AND EDITING INFORMATION
Adding Words to the T9 Database
4. Press
If a word is not in the T9 database, add it using Abc
.
(Multi-tap) mode text entry.
Call the office. is displayed.
1. Press Left Key
(or Right Soft Key) to change
to Abc (multi-tap) mode.
Using the NEXT Key (In T9 Mode)
2. Press
.
After you have finished entering a word, if the word
Wait for a while for space between characters.
displayed is not the one you want, press
to
Bop is displayed.
display additional choices of words from the
database.
3. Press Right Soft Key
(or Left Soft Key) to
change to T9 mode to add the word Bop to the
T9 database.
1. Press
.
Good is displayed.
4. Press
to erase the existing word.
.
2. Press
.
5. Press
6. Press
The display gives you additional choices such as:
cop is displayed.
Home, Gone, Hood, etc.
.
bop is displayed.
24
CONTACTS IN Y5O. EnUterRa namPe Hfor tOhe pNhonEe n’uSmbeMr (upEtoM22ORY
Contacts Entries
characters) and press
.
This allows you to have easy access to your most
A confirmation message is displayed briefly.
frequently dialed phone numbers. You may store up
to 500 entries with up to 5 phone numbers each.
Each entry may be up to 22 characters. Each phone
number may be up to 48 digits.
Note
To skip name entry, press
to go to the next step.
The Basics of Storing Contacts Entries
Note
If the information is complete, press
to return to the
1. From standby mode enter the phone number you
standby mode.
want to save (up to 48 digits).
2. Press Right Soft Key [Options] and select [Save
Note
to Contacts].
To further customize the Contact entry, press Left Soft
3. Use
to highlight a Label and press
.
Key Done
.
Home
Mobile2
/
Home2
/
Office
/
Office2
/
Mobile
/
6. Continue saving the entry as a Speed Dial
/
Pager
/
Fax
/
Fax2
/
None
selecting [Speed Dial]
.
4. Use
to select New Name or Existing and
press
.
Note
Use Existing to add another phone number to a contact
already stored in memory.
25
CONTACTS IN YOUR PHONE’S MEMORY
No Group
/
Family
School
/
Friends
/
Colleagues
/
Options to Customize Your Contacts
Business
/
Once the basic phone number and name information
is stored in your Contacts, you can edit and
customize each entry.
5. Press Left Soft Key
Done to save the change.
Changing the Call Ringer
1. Press Right Soft Key
Contacts and use
to highlight the contact entry you want to edit,
Allows you to identify who is calling, by setting
then press
.
different ringers for different phone numbers in your
Contacts. It is automatically set to the default ringer
when the Contact is saved.
2. Press Left Soft Key
Edit to access the Edit
Contact screen.
1. Press Right Soft Key
Contacts and use
3. Use
to highlight the information you want to
customize, then press
.
to highlight an entry, then press
.
2. Press Left Soft Key
Edit.
Adding or Changing the Group
3. Use
4. Use
to highlight Default Ringer, then press
Allows you to manage your Contacts entries by
.
organizing them into groups.
to select the Ringer Type, then press
1. Press Right Soft Key
Contacts and use
to
.
.
highlight an entry, then press
.
5. Press Left Soft Key
Done to save the change.
2. Press Left Soft Key
Edit
.
3. Use
4. Use
to highlight No Group, then press
to select the Group, then press
.
26
Changing the Message Ringer
3. Use
to highlight Memo, then press
.
Allows you to identify who is sending you a message,
4. Enter text, then press
5. Press Left Soft Key
.
by setting different ringers for different phone
Done to save the change.
numbers in your Contacts. It is automatically set to
the default ringer when the Contact is saved.
Adding or Changing the Picture ID
1. Press Right Soft Key
Contacts and use
Allows the phone to display an image to identify the
to highlight an entry, then press
.
caller.
2. Press Left Soft Key
Edit
.
1. Press Right Soft Key
Contacts and use
to highlight an entry, then press
.
3. Use
to highlight Default Text Msg Ringer
,
then press
.
2. Press Left Soft Key
Edit
.
4. Use
to select the Ringer Type, then
3. Use
4. Use
to highlight Default, then press
.
press
.
to select one of the images available,
5. Press Left Soft Key
Done to save the change.
then press
.
5. Press Left Soft Key
Select
.
Adding or Changing the Memo
6. Press Left Soft Key
Done to save the change.
Allows you to enter up to 32 characters as a memo
to the Contact entry.
1. Press Right Soft Key
Contacts and use
to highlight an entry, then press
.
2. Press Left Soft Key
Edit
.
27
CONTACTS IN YOUR PHONE’S MEMORY
Adding Speed Dial
3. Use
to highlight a Label, then press
.
1. Press Right Soft Key
Contacts and use
Home/ Home2/ Office/ Office2/ Mobile/
Mobile2/ Pager/ Fax/ Fax2/ None
to highlight an entry, then press
.
2. Press Left Soft Key
Edit
.
4. Use
to highlight Existing, then press
.
3. Use
to highlight the phone number you want
5. Use
to highlight the existing Contact entry,
.
to set with a Speed Dial, then press
.
then press
4. Press
to select Speed Dial, then press
.
A confirmation message is displayed.
5. Enter a Speed Dial digit. Use the Keypad, then
Through Contacts
press
, or use
to highlight the Speed Dial
digit, then press
.
1. From standby mode press Right Soft Key
Contacts. Your Contacts display alphabetically.
6. Press Left Soft Key
Done to save the change.
2. Use
to highlight the Contact entry you want
to edit, then press
.
Editing Contacts Entries
3. Press Left Soft Key
Edit
.
Adding Another Phone Number
4. Use
to highlight Add Number, then press
From standby mode
.
1. From standby mode enter the phone number you
want to save (up to 48 digits).
5. Enter the number, then press
.
6. Use
to highlight a Label, then press
.
2. Press Right Soft Key
[Options] and select
A confirmation message is displayed.
Save to Contacts.
28
Default Numbers
3. Press Left Soft Key
Edit
.
The phone number saved when a Contact is created
4. Use
to highlight the phone number, then
is the Default Number. If more than one number is
press
twice.
saved in a Contact entry, another number can be
designated as the Default Number.
5. Edit the phone number as necessary, then press
.
Changing the Default Number
6. Use
to confirm the Label, then press
.
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
A confirmation message is displayed.
2. Use
to highlight the Contact entry you want
Editing Stored Names
to edit, then press
.
1. Press Right Soft Key
Contacts to display your
3. Press Left Soft Key
Edit
.
Contacts alphabetically.
4. Use
to highlight the phone number you want
2. Use
to highlight the Contact entry you want
to highlight the name, then press
to set as the Default Number, then press Right
to edit, then press
.
Soft Key
Options and
Set as Default #
.
3. Press Left Soft Key
Edit.
Editing Stored Phone Numbers
4. Use
.
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
5. Edit the name as necessary, then press
.
6. Press Left Soft Key
Done to save the change.
2. Use
to highlight the Contact entry you want
29
CONTACTS IN YOUR PHONE’S MEMORY
Editing Customized Options
3. Press Left Soft Key
Edit
.
Edit any of the Contacts options in the same manner
4. Use
to highlight the phone number to be
as when the Contact is created.
deleted.
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
5. Press Right Soft Key
Options
.
6. Press
Erase Number
.
2. Use
to highlight the Contact entry you want
7. Press
Erase Number
.
to edit, then press
.
A confirmation message is displayed.
3. Press Left Soft Key
Edit.
Deleting a Contact Entry
4. Use
to highlight the information you want to
customize, then press
.
1. Press Right Soft Key
Contacts to display your
5. Edit the information as necessary, then press
.
Contacts alphabetically.
6. Press Left Soft Key
Done to save the change.
2. Use
to highlight the Contact entry to be
deleted, then press
.
Deleting
3. Press Left Soft Key
4. Press Right Soft Key
Edit
.
Deleting a Phone Number from a Contact
Options
.
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
5. Press
6. Press
Erase Contact
.
Erase
.
2. Use
to highlight the Contact entry, then
30
Additional Ways to Delete a Contact
Phone Numbers With Pauses
At any time when your Contacts are displayed, the
When you call automated systems such as voice mail
Right Soft Key
Options allows you to erase the
or credit billing numbers, you often have to enter a
highlighted entry.
series of numbers. Instead of entering these numbers
by hand, you can store the numbers in your Contacts
Deleting a Speed Dial
separated by special pause characters (P, T). There
are two different types of pauses you can use when
storing a number:
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
Hard Pause (P)
2. Use
to highlight the Contact entry, then
press
.
The phone stops dialing until you press Left Soft Key
Release to advance to the next number.
3. Press Left Soft Key
Edit
.
2-sec Pause (T)
4. Use
5. Use
to highlight the number, then press
.
The phone waits 2 seconds before sending the next
to highlight the Speed Dial entry, then
string of digits.
press
.
6. Use
to highlight the existing Speed Dial
location.
7. Press Right Soft Key
Options
.
8. Press
9. Press
Remove
.
Remove
.
A confirmation message is displayed.
31
CONTACTS IN YOUR PHONE’S MEMORY
Storing a Number with Pauses
Adding a Pause to an Existing Number
1. Press Left Soft Key
Menu
.
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
2. Press
3. Press
Contacts
.
2. Use
to highlight the Contact entry to edit,
.
New Number
.
then press
4. Enter the number.
3. Press Left Soft Key
Edit
.
5. Press Right Soft Key
Pause
.
4. Use
to highlight the number then press
2 times.
6. Use
to select pause type, then press
.
Hard pause/ 2-sec pause
5. Press Right Soft Key
Pause
.
7. Enter additional number(s) (e.g., pin number or
6. Press
Hard pause or
2-sec pause
.
credit card number), then press
.
7. Enter additional number(s), then press
.
8. Use
to select a Label, then press
.
8. Use
to confirm the Label, then press
.
9. Enter a name (up to 22 characters).
A confirmation message is displayed.
A confirmation message is displayed.
32
Searching by Letter
Searching Your Phone’s Memory
The UX390 phone is capable of performing a dynamic
contents search of the phone's memory. A dynamic
search compares entered letters or numbers against
the entries in your Contacts. A matching list is
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
2. Press (or press repeatedly) the key on the keypad
that corresponds with the search letter.
displayed in descending order. You can then select a
number from the list to call or edit. There are several
ways to search:
Searching Options
1. Press Right Soft Key
Contacts
.
●
Scrolling Alphabetically
●
Searching by Letter
2. Press Right Soft Key
Options
.
●
Searching by Options
3. Select the search criteria (use
then press
,
or press the corresponding number on the
keypad):
Scrolling Through Your Contacts
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
New Number
New E-mail
2. Use
to scroll through the list.
Find Name: Enter the character(s) to search for
(such as the first letter(s) of the name).
Find Number: Enter the number(s) to search.
Find Speed Dial: Enter the speed dial
number(s) to search.
33
CONTACTS IN YOUR PHONE’S MEMORY
Making a Call From Your Phone’s
Memory
Find Group: Use
to highlight the group
.
to search for, then press
Once you have stored phone numbers in your
Find E-mail: Enter the e-mail address to search.
Contacts, you can place calls to those numbers
quickly and easily.
Send Text Msg: Send a text message to the
selected contact.
●
By pressing
after searching for a phone
number in Contacts or Recent Calls and
Send Photo Msg: Send a photo message to
highlighting it.
the selected contact.
●
By using Speed Dialing
Erase: Erase the selected entry in your
From Contacts
Contacts.
1. Press Right Soft Key
Contacts to display your
Copy to ST: Copy the selected contact entry
SM
Contacts alphabetically.
to SpeedTalk . Enter extra information to
Group, Ringer, Text Msg Ringer and Picture.
2. Use
to select the Contact entry, then press
Use Left Soft Key
Edit to edit the
.
information.
3. Use
to select the phone number.
to place the call.
4. When the list of matches is displayed, use
highlight a matched entry.
to
4. Press
5. Press
to see more information or press
to place a call.
34
Prepending a Stored Number
From Recent Calls (
as a hot key)
Prepend can be used if you are out of your home
1. Press Left Soft Key
Menu
.
system area and need to add the area code to an
2. Press
Recent Calls
.
existing number in your phone's memory. When a
Contacts entry or message callback number is
displayed, you can add to the beginning of the
3. Use
press
to select the type of recent call, then
.
original number. However, you cannot edit the
original number.
Dialed Calls/ Received Calls/ Missed Calls
1. Recall a number in your Recent Calls (Dialed,
4. Use
to select the phone number.
Received, or Missed).
5. Press
to place the call.
2. Press Right Soft Key
Options
.
Speed Dialing
3. Press
Prepend
.
For a single-digit Speed Dial, press and hold the digit
4. Enter the prepend digits to the phone number.
or press the digit, then press
. For a double-digit
Speed Dial, press the first digit and hold the second
5. Press
to place the call.
digit or press the first and second digits, then press
.
35
CONTACTS
1. List Contacts
TChoe CnotnataccttssMenu allows you to store names,
Allows you to view your Contacts list.
phone numbers and other information in your
phone’s memory.
1. Press
,
,
.
2. Options from here:
Access and Options
●
Press
to scroll through your Contacts
alphabetically.
1. Press Left Soft Key
Menu
.
●
Press Right Soft Key
Options to select one
2. Press
Contacts
.
of the following:
3. Select a sub-menu.
New Number/ New E-mail/ Find Name/ Find
Number/ Find Speed Dial/ Find Group/ Find
E-mail/ Send Text Msg/ Send Photo Msg/
Erase/ Copy to ST
1. List Contacts
2. New Number
3. New E-mail
4. Groups
●
Press Left Soft Key
Alert available at 1X
network
.
5. Speed Dials
6. My Contact Info
36
2. New Number
1. Press
,
,
.
Allows you to add a new number to your Contacts.
2. Enter the e-mail address, then press
.
Note
3. Enter the name, then press
.
Using this sub-menu, the number is saved as a new
4. Continue saving the entry as necessary.
Contact. To save the number into an existing Contact, edit
the Contact entry.
4. Groups
1. Press
,
,
.
Allows you to view your grouped Contacts, add a new
group, change the name of a group, or erase a whole
group.
2. Enter the number, then press
.
3. Select the Label you want and press
.
1. Press
,
,
.
4. Enter the name, then press
.
2. Options from here:
5. Continue saving the entry as necessary.
●
Use
to highlight a group to view, then
press
.
3. New E-mail
●
●
Press Left Soft Key
Add to add a new group
Allows you to save a new e-mail address.
to the list (Group Name and Group Icon).
Note
Use
to highlight a group, then press Right
Using this sub-menu, the e-mail is saved as a new Contact.
To save the e-mail into an existing Contact, edit the
Contact entry.
Soft Key
Options to change the name of the
group or delete the group.
37
CONTACTS
5. Speed Dials
6. My Contact Info
Allows you to view your Speed Dials list, designate
Allows you to enter your own virtual business card to
new Speed Dials, or remove Speed Dial designations
be used in text messages.
entered in your Contacts.
1. Press
2. Use
,
,
.
1. Press
,
,
.
to select the feature you want to edit,
2. Use
to highlight the Speed Dial position (or
then press
.
enter the Speed Dial digit), then press
.
3. Edit the information as necessary.
3. Use
4. Use
to highlight the Contact, then press
.
Note
You cannot edit phone number, but you can add an
to highlight the number, then press
.
additional phone number.
A confirmation message is displayed.
38
RECENT CALLS
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Erase Calls
5. Call Timer
Recent Calls
The Recent Calls Menu is a list of the last phone
numbers or Contact entries for calls you placed,
accepted, or missed. It is continually updated as new
numbers are added to the beginning of the list and
the oldest entries are removed from the bottom of
the list.
6. KB Counter
Note
To view a quick list of all your recent calls, press
from
standby mode.
Access and Options
1. Dialed Calls
1. Press Left Soft Key
Menu
.
Allows you to view the list of outgoing calls; up to 30
entries.
2. Press
Recent Calls
.
1. Press
2. Use
,
,
.
3. Select a sub-menu.
to highlight an entry.
to view the entry.
●
Press
●
Press
to place a call to the number.
39
RECENT CALLS
●
Press Right Soft Key
Options (for call lists) to
4. Erase Calls
select Save to Contacts
/
Save to ST
/
Send Text
Allows you to erase selected call list(s).
Msg
/
Send Photo Msg
/
Prepend
/
Erase
/
Erase All
1. Press
,
,
.
●
Press
to return to the standby mode.
2. Use
to highlight the list of calls to erase, then
.
press
2. Received Calls
Dialed Calls/ Received Calls/ Missed Calls/ All
Calls
Allows you to view the list of incoming calls; up to 30
entries.
3. Press
Erase or
Cancel
.
1. Press
2. Use
,
,
.
to highlight an entry.
5. Call Timer
Allows you to view the duration of selected calls.
3. Missed Calls
1. Press
2. Use
,
,
.
Allows you to view the list of missed calls; up to 30
entries.
to highlight a call list, then press
.
1. Press
2. Use
,
,
.
Last Call/ Home Calls/ Roam Calls/ All Calls
to highlight an entry.
40
6. KB Counter
Allows you to view the list of received and
transmitted data calls.
1. Press
,
,
.
2. Use
to highlight a data call list, then press
.
Received/ Transmitted/ Total
41
MESSAGES
Text messages, pages, and the voice mail box become
available as soon as the phone is powered on.
Messages
Access and Options
●
Check types of messages by pressing the message
key
.
1. Press Left Soft Key
Menu
.
2. Press
Messages
.
●
Make a call to the callback number by pressing
during an Inbox message check.
3. Select a sub-menu.
1. Voice Mail: Shows the number
●
Read and edit messages saved in the outbox after
of messages in voice mail box.
transmission and resend them.
2. New Text Msg: Sends a
The phone can store up to 116 messages (1 voice
message, 50 inbox text messages, 50 outbox text
messages, 15 saved text messages). The UX390
message.
3. New Photo Msg: Sends an
MMS message.
supports up to 160 characters per message including
header information. The information stored in the
4. Inbox: Shows the list of
received messages.
message is determined by phone mode and service
capability. Other limits to available characters per
message may exist. Please check with your service
provider for system features and capabilities.
5. Outbox: Shows the list of sent
messages.
6. Saved: Shows the list of saved
and draft messages.
7. Msg Settings: Selects alert
type for new messages.
8. Erase All: Deletes all stored
42
New Message Alert
1. Voice Mail
There are three ways your phone alerts you to new
Allows you to view new voice messages recorded in
messages.
the voice mail box. Your phone will alert you when
you receive a new voice message.
1. The phone displays a message on the screen.
2. One of eight ring types is heard, if selected.
Checking Your Voice Mail Box
1. Press
,
,
.
3. The message icon (
) is displayed on the
2. Options from here:
screen. In the case of an urgent message, the icon
will flash and Urgent message is displayed.
●
Press Left Soft Key
Clear to delete information,
then select Clear Count.
Note
●
If you receive the same message twice, your phone deletes
the older one and the new one is stored as a Duplicate.
Press
to listen to the message(s).
43
MESSAGES
Customizing the Text Message Using Options
2. New Text Msg
Allows you to send text messages, EMS messages,
1. Create a new message.
pages, and e-mail transmissions. Each message has a
2. Press Right Soft Key
Options
.
destination (Address 1) and information (Message).
These are dependent upon the type of message you
want to send.
3. Select the option(s) to customize.
Send
Sends the message.
The Basics of Sending a Text Message
Priority
Gives priority to the message.
Normal
/
Urgent
1. Press
,
,
.
Callback #
Inserts a pre-programmed
2. With the highlight on Address 1, press
3. Enter the recipient's address, then press
.
callback number with your
message.
.
On
/
Off
/
Edit
4. Press
to access the message screen.
Delivery Notice
Informs you that the message
has been successfully
5. Type your message (text or e-mail), then press
.
delivered to the recipient.
6. Press Left Soft Key Send.
Enhanced
/
Normal
A confirmation message is displayed.
Save Message
Erase Field
Saves the message into the
saved folder.
Deletes address or contents
of message field.
4. Complete and send the message.
44
Using Contacts to Send a Text Message
Text Options
You can designate an entry saved in your Contacts as
While you are composing the text of a message you
Address 1 instead of manually entering the
can insert customized text.
destination.
1. Create a new message.
1. Press
,
,
.
2. Use
to highlight Message, and then press
2. Press Left Soft Key
Contacts
.
.
3. Select Contacts
/
Recent Calls
/
Recent
3. Press Right Soft Key
Options
.
Addresses. then press
.
4. Select the option(s) to customize.
4. Use
to highlight the Contact entry containing
Insert Quick-Text
Save Quick-Text
Inserts 11 predefined phrases.
the destination, then press
.
Allows you to define phrases
5. Use
to highlight the SMS phone number or
to insert as Insert Quick Text.
e-mail address, then press
.
Insert Signature
Inserts a predefined signature.
Custom/ My Contact Info
Note
5. Complete and send or save the message.
The Address 1 feature allows multi-sending of up to 10
addresses.
6. Complete the message as necessary.
45
MESSAGES
Message Icon Reference
3. New Photo Msg
Allows you send messages with Text, Picture and
Sent: Messages sent in Short Message
Sound.
Center(SMC) have been transmitted.
Fail: Indicates a failed message transmission.
Delivery: Message has been delivered.
Lock: Indicates that messages are locked.
1. Press
,
,
.
2. With the highlight on [Address 1], press
.
You can search the destination by scrolling your
Contacts, Recent Call and Online Album after
Multi-sending: Indicates more than one
pressing Left Soft Key [Contacts].
designated recipient.
3. Enter the recipient's address, then press
.
Pending: Transmission is unavailable in a no
4. With the highlight on [Subject], press
.
service area or in an analog service area.
Messages are pending transmission. Pending
messages are transmitted automatically
when digital mode becomes available.
5. Enter the Subject, then press
.
6. Press
to access the message screen.
7. Type your message (text or e-mail), then press
.
8. With the highlight on [Picture], press
.
.
9. Use
to highlight a picture, then press Left
Soft Key Select
.
10. With the highlight on [Sound], press
46
4. Inbox
11. Use
to highlight a sound, then press
.
The phone alerts you in 3 ways when you receive a
Or you can record your voice memo by pressing Left
new message by:
Soft Key [Record] and send it with your message.
●
Displaying a message notification on the screen.
12. Press Right Soft Key
Options
.
●
Sounding a beep, vibrating or sound, if set.
13. Select the option(s) to customize.
●
Displaying the message icon
when the message is urgent).
(It blinks
Preview
Send
Shows your message before sending.
Sends the message.
Priority
Gives priority to the message.
Received text messages, page messages, photo
messages and e-mail lists may be searched and the
contents viewed. Received messages are displayed
from newest to oldest.
Normal
/
Urgent
Delivery Notice Informs you that the message has
been successfully delivered to the
recipient.
Enhanced
/
Normal
Out of Memory Warning
Save Message
Saves the message into the saved
If the memory is full, no more messages can be
folder.
received until enough memory space becomes
14. Complete and send the message.
available. When there is no space to save SMS
messages, [Inbox] is 100% full. Unable to rcv.
Please erase messages. is displayed. For MMS
messages, Picture Msgs full. Delete messages. For
MMS notifications, Picture Msg Noti full. Delete
msgs. is displayed and new messages are not
accepted.
47
MESSAGES
Viewing Your Inbox
Options from here:
Reply w Copy
Up to 50 received messages can be stored in the
Replies to the SMS with the
original message attached.
Inbox.
Forward
Forwards a received message to
other destination address(es).
1. Press
,
,
.
2. Use
to highlight an Inbox message.
Erase
Deletes the selected message
from the Inbox.
●
Left Soft Key
Reply complying with the
kinds of messages (Text/Photo Messaging).
Save Address
Stores the callback number, e-
●
Right Soft Key
Options
.
mail address, and numbers in
user data included in the
received message into your
Contacts.
Erase
Deletes the selected message
from the Inbox.
Lock/UnLock
Locks a message so that it is
not erased if the Erase Inbox
or Erase All feature are used.
Save Quick-Text
Save Message
Lock/UnLock
Saves the message into the
Quick-Text list.
Saves Inbox message into the
Saved Folder.
3. Use
to highlight an Inbox message, then
press
.
Locks or unlocks the selected
message. Locked messages can
4. While viewing the selected message, press Left
Soft Key
Reply or Right Soft Key
Options
.
not be deleted by the Erase
Inbox or Erase All functions.
Message Info
Shows the message type
priority and status.
48
Play
Replies to the text message
5. Outbox
with original message attached.
Up to 50 sent messages or photo messages can be
Play Again
Send To
stored in the Outbox. View lists and contents of sent
messages and verify whether the transmission was
successful or not.
Erase
Deletes the selected message.
Stores the callback number, e-
Save Picture
Save Sound
Save Address
1. Press
,
,
.
2. Use
to highlight an Outbox message.
●
Press Left Soft Key
Resend
.
mail address, and numbers in
user data included in the
received message into your
Contacts.
●
Press Right Soft Key
Options
.
Erase
Deletes the selected message
from the Outbox.
Save Message
Save Quick-Text
Lock/Unlock
Saves Outbox message into
the Saved Folder.
Lock/Unlock
Locks a message so that it is
not erased if the Erase
Outbox or Erase All feature is
used.
Saves the message into the
Quick-Text list.
Locks or unlocks the selected
3. Use
press
to highlight an Outbox message, then
. While viewing the selected Outbox
message. Locked messages
can not be deleted by the
Erase Outbox and Erase All
functions.
message, press Left Soft Key
Resend to or
press Right Soft Key Options
.
Message Info
Shows the message type
priority and status.
49
MESSAGES
Message Settings Sub-Menu Descriptions
6. Saved
Displays saved messages and draft messages.
7.1 Auto Save (Auto Save/ Prompt/ Do Not Save)
1. Press
,
,
.
Allows you to automatically save sent messages in
your Outbox. You can choose Auto Save, Prompt, or
Do Not Save.
2. Use
to highlight a Saved message.
●
Press Left Soft Key
Press Right Soft Key
Resume/Resend
.
7.2 Auto Erase (On/ Off)
●
Options
.
With this feature on, read messages(except locked
messages) are automatically deleted when you
exceed the storage limit.
Erase
Deletes the selected message.
Lock/Unlock
Locks a message so that it is
not erased if the Erase Saved
or Erase All feature is used.
7.3 Photo-Auto Receive (On/ Off)
Allows you to set photos to be received automatically.
7. Msg Settings
7.4 Callback #
Allows you to configure 9 settings for received
Allows you to automatically send a designated
messages.
callback number when you send a message. Allows
you to manually enter the number.
1. Press
,
,
.
2. Use
to highlight one of the settings and
to select it.
7.5 Signature (None/ Custom)
press
Allows you designate a signature to automatically
send with your messages. You can create a custom
signature line.
50
7.6 Voice Mail #
8. Erase All
Allows you to manually enter the number for Voice
Mail Service. This number should be only used when
a VMS access number is not provided from the
network.
Allows you to erase all the messages stored in your
Inbox, Outbox, or Saved messages folders. You can
also erase all messages at the same time.
1. Press
,
,
.
7.7 Text Auto View (On/ Off)
●
Press
Inbox to erase all messages stored
Allows you to directly display the content when
receiving a message.
in the Inbox.
●
●
●
Press
Outbox to erase all messages
7.8 Entry Mode (T9Word/ Abc/ 123)
stored in the Outbox.
Allows you to select the default input method.
Press
Saved to erase all messages stored
in the Saved messages folder.
7.9 Insert Quick-Text
Press
All to erase all messages stored in
Allows you to display, edit, and add text phrases.
the Inbox, Outbox, and Saved messages folder.
These text strings allow you to reduce manual text
input into messages.
2. Press
Erase All
.
7.0 Text Auto Play (On/ Off)
A confirmation message is displayed.
With this feature on, the display automatically scrolls
down while viewing messages.
51
SM
SpeedTalk
SM
Access and Options
SpeedTalk
SM
1. Press Left Soft Key
Menu
.
SpeedTalk is an walkie-talkie-style service that
makes it easy for you to get in touch with your
2. Press
SpeedTalk
.
spouse, friends or group of people instantly, with just
a touch of a button on the left top of your phone.
3. Select a sub-menu option.
SM
SpeedTalk (ST) allows you to make a barge call or
1. ST Contacts
2. New ST Contact
3. New ST Group
4. Recent ST
send an Alert message. With a barge call the
receiving party does not have the option to ignore
the call. When an Alert message is sent to the
receiving party, the receiving party has the option to
place a ST call or ignore the alert.
5. ST Settings
52
SM
SM
1C.aFlrlofmroSmtanSdpbyeemdoTdae,lkpresCs aonndtahocltdLSiTstke(yBtaorge)
1C.aFlrlofmroSmtanSdpbyemedodTealpkressCaondnthaocldttLhiestST(Akelyertot)
access your ST Contact List.
access your ST Contact List.
2. Use
to highlight the ST Contact entry you
2. Use
to highlight the ST Contact entry you
wish to call.
wish to alert.
3. Press and hold the ST key.
3. Press Left Soft Key
Alert
.
●
Sender hears ST talk tone and can begin
●
Receiver hears alerting tone and receives alert
speaking.
message.
●
Receiver has the options to answer or ignore
4. If receiver accepts the alert and places a ST call to
using
.
the sender,
4. Press and hold ST Key to send alert.
●
Sender hears incoming barge tone.
5. Release ST Key after speaking.
●
Sender hears receiver’s voice followed by the
●
Receiver hears incoming barge tone.
floor available tone.
●
Receiver hears sender’s voice followed by the
●
Receiver’s device displays connected screen.
floor available tone.
●
5. Press and hold ST key to speak.
6. Release ST key to listen.
Sender’s device displays connected screen.
6. Press and hold ST key to speak.
7. Release ST key to listen.
53
SM
SpeedTalk
SM
●
●
All members of Group hear sender’s voice
followed by the floor available tone.
Call from SpeedTalk Contact List
(Group)
Sender’s device displays connected screen.
Allows you to make a multiparty call with all or
selected members of a ST Group.
Note
1. Press and hold ST key to access ST Contacts list.
A group call is only a Barge and a user cannot alert a
group.
2. Use
to highlight the ST Group.
3. To make a ST Group call to all members in the
Group,
1C.aFlrlomfroIdmle SKcreeyenp,aednte(rBthaergneum)ber.
- Press and hold ST Key.
To make a ST Group call to selected members of
the Group,
2. Press and hold ST Key.
●
Sender hears ST talk tone and can begin
- Use
to highlight the ST group and Press
speaking.
.
●
If the phone number is in the ST contact list,
- Select the Contacts you wish to include in ST
screen shows the Contact name.
3. Release ST key.
group call.
●
Sender hears ST talk tone and can begin
speaking.
●
Receiver hears incoming barge tone.
●
Receiver hears sender’s voice followed by the
4. Release ST key.
floor available tone.
●
All members of Group hear incoming barge
●
Sender’s device displays connected screen.
54
SM
SM
Incoming SpeedTalk (Barge)
Incoming SpeedTalk (Alert)
1. Listening screen is shown with the phone number.
If the number is stored in ST Contact List, the
sender’s name is shown.
1. Buddy Alert Message appears.
2. Select Answer or Ignore.
3. If Answer is selected, ‘Push ST button to make ST
call to (Contact name)’ is shown.
2. Press and hold ST key.
●
Sender hears ST talk tone and can begin
speaking.
4. Press and hold ST key to reply.
3. Release ST key.
●
Sender hears ST talk tone and can begin
speaking.
●
●
Receiver hears incoming barge tone.
5. Release ST key.
Receiver hears callers voice followed by the
floor available tone.
●
●
Receiver hears incoming barge tone.
●
Sender’s device displays connected screen.
Receiver hears caller's voice followed by the
floor available tone.
Note
●
Sender’s device displays connected screen.
All Incoming ST calls come through the Speaker Phone.
55
SM
SpeedTalk
SM
SM
Incoming SpeedTalk (Group)
1. SpeedTalk Contacts
Allows you to view your ST Contacts list. ST
Contacts consists of individuals and Groups. For an
individual, a single phone number is saved. For a
Group, multiple individuals can be saved. An
individual can be saved in multiple ST Groups.
1. The name of the Group will be displayed. Only
one person can speak at a time.
2. If floor is available, press and hold ST key, speak
after the talk tone is heard.
1. Press
2. Press
,
,
.
SM
Making a SpeedTalk call when the
to scroll through your ST Contacts
phone is closed
alphabetically.
When the phone is closed, you can place a ST call by
holding down the ST key. Your Recent ST Call history
3. Press Right Soft Key
Options to select one of
the following:
will come up on the outer LCD screen. You may scroll
through the list using the side arrow keys. To place a
call, highlight a number then press the ST key. When
the call is connected, you will see an icon in the
status bar of your outer LCD screen exterior using
When highlighted entry is Individual
Find Name/ Find Number/ Find Group/ New
Contact/ New Group/ Erase/ Copy to Contacts
SM
SpeedTalk Menu.
When highlighted entry is Group
Find Name/ Find Number/ Find Group/ New
Contact/ New Group/ Erase
56
SM
6. To add a contact to the group, press Right Soft
2. New SpeedTalk Contact
Key
for options, then
to add buddy.
Allows you to add a new individual to ST Contacts.
1. Press
,
,
.
SM
4. Recent SpeedTalk
2. Enter the number, then press
.
Allows you to view the list of the Recent ST calls (up
to 10).
3. Enter the name, then press
.
1. Press
,
,
.
4. Phone will automatically connect to server and
update Contact information.
2. Icons show you whether the ST call was initiated
or received and individual or group.
A confirmation message is displayed briefly.
SM
SM
5. SpeedTalk Settings
3. New SpeedTalk Group
Allows you to adjust your ST Settings.
Allows you to add a new ST group.
SM
5.1 SpeedTalk On/Off
1. Press
,
,
.
Allows you to set your ST availability.
2. Enter the ST Group name, then press
.
On allows both incoming and outgoing ST calls.
A confirmation message is displayed briefly.
You can use all ST functions and receive all incoming
ST calls and alerts.
shows on your idle screen.
3. Press Left Soft Key to Save Group.
4. Phone will automatically connect to server and
Off blocks all incoming ST calls.
update Contact information.
When other parties try to place a ST call to your
5. Once saved in ST Contact list, select the newly
number, ‘(Contact name) unavailable’ message will
57
SM
SpeedTalk
SM
Also, the unavailable icon will appear next to your
name in their contact list.
5.3 SpeedTalk Alert Tone
SM
Allows you to set the alert tone of SpeedTalk .
shows on your idle screen.
Other than the default alert tone, a variety of
melodies are available.
1. Press
,
,
,
.
1. Press
,
,
,
.
2. Set On
/
Off with
then press
.
5.2 Speaker On/Off
Note
You can adjust the alert tone volume through the master
volume (Settings -> Sounds -> Volume -> Ringer).
Allows you to manually set you Speakerphone on/off
(performs the same function as the Speakerphone
key on the side of the phone).
1. Press
,
,
,
.
2. Set On
/
Off with
then press
.
58
SM
easyedge
SM
When using applications, an incoming call will
easyedge
automatically pause the application and allow you to
answer the call. When you complete your call, you
can resume using the application.
SM
easyedge allows you to do more than just talk on
your phone. easyedge is service that allows you to
download and use applications on your phone. With
easyedge, it is quick and easy to personalize your
phone to your lifestyle and tastes. Just download the
Access and Options
1. Press Left Soft Key
Menu
.
applications that appeal to you. With a wide range of
products available, from ringtones to games to
2. Press
easyedge
.
products tools, you can be assured that you can find
something useful, practical, or down right
entertaining. There are new applications constantly
being created for your use.
3. Options from here:
1. easyedge
2. Help
Downloading Applications
You can download applications and use easyedge
wherever service is available, see map for details.
Incoming Calls
While downloading an application, incoming calls will
automatically be sent to your voice mail, if available.
If you do not have voice mail, downloading will not be
interrupted by an incoming call, and the caller will
receive a busy signal.
59
SM
easyedge
Managing Your easyedge Applications
1. easyedge
Add new applications and remove old ones at any
Allows you to download selected applications while
time.
displaying the entire application list retrieved from
the easyedgeserver connection.
Removing easyedge Applications
1. Press
2. Press
,
,
.
By deleting an application you will restore memory
capacity to the phone. To restore an application once
it has been removed will require that you purchase
.
SM
from the easyedge shop.
Shortcut
Pressing the right arrow key
will start easyedge.
1. Access easyedge.
2. Use
to select Settings, then press
.
Note
Contact U.S. Cellular© to add this service to your account.
3. Use
to highlight Manage Apps, then press
.
4. Use
to highlight the application to be
2. Help
deleted, then press
.
Gives you information about the easyedge selection
5. Use
to select Remove, then press
.
key.
1. Press
2. Press
,
,
.
.
60
MEDIA
1. Images
Media
Allows you to choose downloaded images to your
phone to display as the background image displayed
on the phone.
This menu allows you to use a wide variety of images,
sounds, and more.
Access and Options
1. Press
2. Use
,
,
.
1. Press Left Soft Key
Menu
.
to highlight your selection, then press
and press Left Soft Key
Set As to select.
2. Press
Media
.
3. Select a sub-menu.
2. Sounds
1. Images
2. Sounds
Allows you to choose the downloaded ring tones
heard for incoming calls.
1. Press
,
,
.
2. Use
to highlight your selection, then press
Left Soft Key
Set As to select.
61
TOOLS
1. Schedule
Tools
Allows you to conveniently keep and access your
agenda(s). Simply store your appointments and your
phone will alert you with a reminder of your
appointment.
Your phone tools include a Schedule, Alarm Clock,
Voice Memo, My Shortcut, Notepad, Ez Tip Calc,
Calculator, and World Clock.
Access and Options
1. Press
2. Use
,
,
.
1. Press Left Soft Key
Menu
.
to highlight the scheduled day.
2. Press
Tools
.
Moves cursor to the left.
Moves cursor to the right.
Moves to the previous week.
Moves to the next week.
3. Select a sub-menu.
1. Schedule
2. Alarm Clock
3. Voice Memo
4. My Shortcut
5. Notepad
3. Press Left Soft Key Add
.
4. Enter your schedule information including:
●
●
●
●
●
●
Date
Time
●
Contents
Voice
6. Ez Tip Calc
7. Calculator
8. World Clock
Recurring event
When to ring the alarm reminder
Which ring alarm to sound
5. Press Left Soft Key
Save
.
62
3. Use
to highlight the alarm time then press
Note
.
Schedule will not alert you during a call or during SMS
transmitting. It will sound the reminder after you exit a
call.
4. Set the time for alarm and press
.
5. Use
to highlight Once (recurring setting) and
press
.
2. Alarm Clock
Allows you to set one of four alarms. The current
time is displayed at the top of the screen when you
select an alarm to set. At the alarm time, Alarm 1 (or
6. Press
to select one of the following and
press
.
Once/ Daily/ Mon - Fri/ Weekends
2 or 3, as applicable) will be displayed on the LCD
screen and the alarm will sound.
7. Use
to highlight Ring (ring type setting) and
press
.
1. Press
,
,
.
8. Use
to select one of the available alarm ring
2. Select the alarm you want to edit.
types and press
.
Alarm 1/
Alarm 2/
Alarm 3/
9. Press Left Soft Key
Save
.
Quick Alarm
Note
In Quick Alarm option, you can select 10 min later/ 30
min later/ 1 hour later/ 3 hours later.
For example you can take a nap in the afternoon with the
quick alarm set to 30 min later. It will allow you to wake
up on time.
63
TOOLS
3. Voice Memo
4. My Shortcut
Allows you to add, listen to, and erase short verbal
Allows you to set a shortcut to Recent Calls
,
reminders.
Contacts
,
Tools, or Settings using the Up Navigation
key.
1. Press
,
,
.
1. Press
,
,
.
2. Press Left Soft Key
memo.
New to record a new voice
An explanation message is displayed.
2. Press
to continue.
3. Talk into the microphone, then press Left Soft Key
Done or
.
3. Select the shortcut you want to set (press the
corresponding number or highlight it and press
4. While the highlight is still on the recording, press
).
Right Soft Key
Options to access the
following:
5. Notepad
●
●
Edit Title
Memory Info
Allows you to add, read, edit, and erase notes to
●
●
●
Set As
Erase
yourself.
Erase All
1. Press
,
,
.
2. Press Left Soft Key
Add to write a new note.
To Playback a Voice Memo
1. Access Voice Memo, highlight the Voice Memo you
3. Type the note, then press
.
want to hear, then press
.
A confirmation message displays briefly, then
displays your list of notes.
2. Press Left Soft Key
Play
.
64
Viewing a Notepad Entry
7. Calculator
1. Access Notepad and highlight the entry.
Allows you to perform simple mathematical
calculations. You can enter numbers up to the fifth
decimal place.
2. To erase, press Right Soft Key
Options
.
●
Erase
1. Press
,
,
.
●
Erase All
2. Enter data.
To edit highlight the entry, then press
and
●
Use keypad to enter numbers.
press Left Soft Key
Edit
.
●
●
●
●
●
●
Use
to enter decimals.
Use
to enter plus/minus change.
6. Ez Tip Calc
Press Left Soft Key to clear the entry.
Allows you to quickly and easily estimate the initial
amounts for a bill with the calculated amount of the
bill, the amount and percentage of the tip, and the
number of people as variables.
Press Right Soft Key to enter algebraic operators.
Use Navigation Key to enter operators.
Press
to complete equation.
1. Press
,
,
.
Note
Calculations can be made with up to 33 characters at one
time (e.g., 63+78-21 would be 8 characters).
65
TOOLS
8. World Clock
Allows you to determine the current time in another
time zone or country.
1. Press
,
,
.
2. Press Right Soft Key
Cities to move the time
bar across the world map and display the
date/time in that location.
Note
Press Left Soft Key
Set DST to display Daylight
Savings Time in the selected location.
66
SETTING
1. Sounds
Settings
Options to customize the phone’s sounds.
The Settings Menu has options to customize your
phone.
1.1 Ringers
Access and Options
Allows you to assign ring tones for incoming calls.
1. Press
,
,
,
.
1. Press Left Soft Key
Menu
.
2. Select Caller ID
/
No Caller ID
/
Restricted Calls
.
2. Press
Settings
.
3. Use
to select a ringer, then press
.
3. Select a sub-menu.
1. Sounds
2. Display
3. System
4. Security
1.2 Key Tone
Allows you to select the Key Tone type.
1. Press
,
,
,
.
2. Select a tone style, then press
.
5. Call Setup
6. Data Settings
7. Voice Services
8. Location
Beep Comes out a beep sound, when you press
the keys.
English Comes out a voice (English), when you
press the keys.
Spanish Comes out a voice (Spanish), when you
press the keys.
67
SETTING
1.3 Volume
1.5 Service Alerts
Allows you to set various volume settings.
Allows you to set any of the 4 Alert options to On or Off.
1. Press
,
,
,
.
1. Press
,
,
,
.
2. Select an alert option.
2. Select Ringer
/
Earpiece
/
Key Beep
/
Speaker
Phone
.
1.5.1 Service Change
3. Use
to adjust the volume of the ringer, then
Alerts you when service changes. Displays Entering
press
to save the setting.
Service Area or Leaving Service Area message.
1.4 Message Alerts
1.5.2 Minute Beep
Allows you to select the alert type for a new
Alerts you 10 seconds before the end of every
message.
minute during a call.
1. Press
,
,
,
.
1.5.3 Call Connect
2. Select Voice Mail
/
Text Message/ Photo Msg
/
Alerts you when the call is connected.
E-mail
/
Page.
1.5.4 Back To Top
3. Use
to select a setting, then press
.
Alerts you when you scroll through the end of a
menu list.
3. Use
to set On
/
Off, then press
.
68
1.6 Power On/Off Tone
2. Display
Allows you to set the phone to sound a tone when
Options to customize the phone’s display screen.
the phone is powered on and off.
2.1 Banner
1. Press
2. Use
,
,
,
.
Allows you to enter a string of up to 16 characters
to set to On
/
Off, then press
.
which display on the LCD screen.
1.7 DTMF Length
1. Press
,
,
,
.
Allows you to set the Key tone length and touch tone
2. Enter your banner text, then press
.
playback speed.
2.2 Backlight
1. Press
,
,
,
.
Allows you to set the duration for illuminating the
2. Select an option, then press
.
backlight. LCD and Key Light Timer are set separately.
Normal Sends out a tone for a fixed period of
time even if you keep the key pressed.
Note
Long Sends out a continuous tone for as long
If an amount of time is set for the timer option, the time
as you keep the key pressed.
starts after the last key was pressed.
Note
2.2.1 LCD
Dual-Tone Multi Frequency (DTMF) Signaling by the
simultaneous transmission of two tones, one from a group
1. Press
,
,
,
,
.
of low frequencies and another from a group of high
frequencies. Each group of frequencies consists of four
frequencies. Setting the Key Beep length to Long will
extend the DTMF tone.
2. Choose a sub-menu, then press
.
Timer/ Brightness
69
SETTINGS
2.2.2 Key Light Timer
2.4 Menu Style
Allows you to view the Menu as an Icon or List
1. Press
,
,
,
,
.
display.
2. Choose a setting, then press
.
1. Press
,
,
,
.
7 seconds/ 15 seconds/ Always on/ Always off
2. Select Icon or List and press
.
2.3 Screens
2.5 Clocks
Allows you to choose the kind of background to be
Allows you to choose the kind of clock to be
displayed on the phone.
displayed on the LCD screen.
1. Press
,
,
,
.
1. Press
,
,
,
.
2. Select Wallpaper
/
Power On
/
Power Off, then
2. Select Normal
/
Analog
/
Digital, then press
.
press
.
3. Press Left Soft Key
Save
.
3. Select from different screens, then press
.
2.6 Theme Colors
4. Press
.
Allows you to choose the color of the background
5. Left Soft Key
Save
.
screen.
Note
1. Press
,
,
,
.
Right Soft Key
More, provides access to additional
2. Select Default
/
Green
/
Violet
/
Orange, then
choices.
press
.
70
2.8.2 Text Editor
2.7 Contrast
Allows you to set the level of contrast for your LCD
1. Press
,
,
,
,
.
screen.
2. Select Size or Color sub-menu.
1. Press
,
,
,
.
Size
/
Color
2. Choose a Contrast sub-menu and press
.
3. Press
to choose a setting, then press
to
Main LCD/ Front LCD
save.
3. Use
to adjust the contrast level, then press
2.9 Language
.
Allows you to set the bilingual feature according to
2.8 Fonts
your preference. Choose between English and
Spanish.
Allows you to set the size and color of the font for
calling digits and text editor.
1. Press
,
,
,
.
2. Use
.
to select English or Spanish, then press
2.8.1 Calling Digits
1. Press
,
,
,
,
.
2. Select Size or Color sub-menu.
Size
/
Color
3. Press
to choose a setting, then press
to
save.
71
SETTINGS
2.0 Power Saver
3.2 Set NAM
Display and buttons are lighted for a designated
Allows you to select the phone’s NAM (Number
length of time, allowing you of the convenience to
Assignment Module) if the phone is registered with
multiple service providers.
use your mobile phone in the dark.
1. Press
,
,
,
.
1. Press
,
,
,
.
2. Use
to select 2 min
/
10 min
/
30 min
/
Off
,
2. Use
.
to select NAM1
/
NAM2, then press
then press
.
3.3 Auto NAM
3. System
Allows the phone to automatically switch between
programmed telephone numbers corresponding to
the service provider area.
The System menu allows you to designate specific
system network settings.
3.1 Select System
1. Press
2. Use
,
,
,
.
Allows you to set up the phone producer’s
to select On
/
Off, then press
.
management environment. Leave this setting as the
default unless you want to alter system selection as
instructed by your service provider.
3.4 Serving System
Identifies the channel number of a system that is
1. Press
,
,
,
.
served as a SID Number. This information should only
be used for technical support.
2. Use
to select Home Only
/
Automatic A
/
Automatic B, then press
.
1. Press
,
,
,
.
72
When locked, you can receive
incoming calls and make only
emergency calls.
4. Security
The Security menu allows you to secure the phone
electronically.
On Power Up
The phone is locked when it is
turned on.
4.1 Lock Phone
Keeps your phone from unauthorized use. Once the
phone is locked, it is in restricted mode until the lock
code is entered. You can receive phone calls and still
make emergency calls.
4.2 Restrict Calls
Allows you to restrict incoming and outgoing calls. If
you set this feature to Outgoing Only, you can only
place calls to emergency numbers and phone
numbers stored in your Contacts.
You can modify the lock code using the New Lock
code within the Security menu.
Note
1. Press
,
,
.
You can receive the incoming calls from saved contacts on
2. Enter the four-digit lock code.
your phone, when Incoming Only is on.
The default lock code is commonly the last 4
1. Press
,
,
.
digits of your phone number.
2. Enter the four-digit lock code.
3. Press
Lock Phone
.
3. Press
4. Use
Restrict Calls
.
4. Use
to select an option, then press
.
Unlock
The phone is never locked
(Lock mode can be used).
to select On
/
Off, then press
.
Lock
The phone is always locked.
73
SETTINGS
4.3 Emergency #s
4.5 Erase Contacts
Allows you to enter 3 emergency numbers. You can
call these emergency numbers and 911, even when
the phone is locked or restricted.
Allows you to erase all of your Contacts at once.
1. Press
,
,
.
2. Enter the four-digit lock code.
1. Press
,
,
.
3. Press
Erase Contacts
.
2. Enter the four-digit lock code.
4. Select Erase all #s then press
.
3. Press
4. Use
Emergency #s
.
to select the emergency number
4.6 Reset Default
position, then press
.
Allows you to reset your phone to the factory default
settings.
5. Enter an emergency phone number, then press
.
1. Press
,
,
.
4.4 Change Lock
2. Enter the four-digit lock code.
Allows you to enter a new four-digit lock code.
3. Press
4. Press
5. Press
Reset Default
.
1. Press
,
,
.
.
2. Enter the four-digit lock code.
Revert
.
3. Press
Change Lock
.
4. Enter a new 4-digit lock code.
5. For confirmation, it will ask you to enter the new
74
5.3 Auto Answer
5. Call Setup
Allows you to select the number of rings before the
phone automatically answers a call. This feature is
intended for use with hands free devices, but is an
The Call Setup menu allows you to designate how the
phone handles both incoming and outgoing calls.
5.1 Auto Retry
independent feature of the phone and must be
manually turned on/off when connected or
disconnected from the device.
Allows you to set the length of time the phone waits
before automatically redialing a number when the
attempted call fails.
1. Press
,
,
,
.
1. Press
,
,
,
.
2. Use
to select a setting, then press
.
2. Use
to select a setting, then press
.
●
Off
●
After 5 seconds When you have an incoming
call, the phone automatically responds after 5
seconds with the flip opened.
Off/ Every 10 seconds/ Every 30 seconds/
Every 60 seconds
5.2 Answer Call
5.4 One-Touch Dial
Allows you to determine how to handle an answered
Allows you to initiate a speed dial call by pressing
call.
and holding the speed dial digit. If set to Disable,
Speed Dial numbers designated in your Contacts will
not function.
1. Press
2. Use
,
,
,
.
to select a setting, then press
.
1. Press
,
,
,
.
Flip Open/ Any Key/ SEND Only
2. Use
to select a setting, then press
.
Enable/ Disable
75
SETTINGS
5.5 Voice Privacy
5.7 TTY Mode
Allows you to set the voice privacy feature for CDMA
Allows you to attach a TTY (Teletype writer) device
calls as Enhanced or Standard. CDMA offers inherent
enabling you to communicate with parties also using
voice privacy. Check with your service provider for
a TTY device. A phone with TTY support is able to
availability.
translate typed characters to voice. Voice can also be
translated into characters and then displayed on the
TTY.
1. Press
,
,
,
.
2. Use
to select a setting, then press
.
1. Press
2. Press
3. Use
,
,
,
.
Enhanced/ Standard
.
5.6 Auto Volume
to select a setting, then press
.
Provides a better audio experience by enabling the
TTY Full/ TTY + TALK/ TTY + HEAR/ TTY Off
Auto Volume feature to control the dynamic range
and volume of the sending and receiving voice across
different levels of speaker and environments.
5.8 Airplane Mode
Allows you to use the general application and
1. Press
,
,
,
.
restricts the output of RF communication.
2. Use
to select a setting, then press
.
1. Press
2. Use
,
,
,
.
On/ Off
to select a setting, then press
.
On/ Off
76
6. Data Settings
7. Voice Services
This menu allows you to use wireless data
Allows you to select options for voice activation,
communication services. Wireless data
announce alerts and recognition results; and enables
communication services refers to the utilization of
you to adapt the phone to recognize your way of
subscriber terminals for access to the internet with
personal computers or laptops at 19.2 Kbps or at a
saying numbers.
7.1 Voice Commands
maximum of 230.4 Kbps. The connection speed
depends on your carrier’s network and other
variables. Check that communications information
specifications match the network.
Allows you to set how you activate voice recognition.
1. Press
2. Use
●
,
,
,
.
to select a setting, then press
.
6.1 PC Connection
Flip Open Activates voice recognition whenever
Allows you to select the data port.
you flip open the phone. (When the phone is
already open, you activate voice recognition by
pressing the voice command key.)
1. Press
,
,
,
.
2. Use
to select a setting, then press
.
●
Side Key Only Activates voice recognition when
USB/ RS-232C(COM Port)/ Closed
you flip open the phone and press the voice
command key.
77
SETTINGS
7.2 Sound Modes
7.3 Announce Alerts
Allows you to set Driving Mode/Announce Mode.
Allows you to notify caller ID and sender of message
by voice.
1. Press
2. Use
,
,
,
.
1. Press
2. Use
,
,
,
.
to select a setting, then press
.
to select a setting, then press
.
Driving Mode
/
Announce Mode
/
Normal Mode
On
/
Off
For example,
Note
1) Press Left Soft Key
Menu
.
When Announce Alerts is set,
is displayed on the
2) Main menu screen appears, phone announces
screen.
“Main menu”.
7.4 Best Match
3) Then, phone announces the first menu item
that is highlighted.
After you say a name or a number, your phone
displays the recognition results—the name or
number that best matches the one you said—and
asks you to confirm. Select the number of results that
you want your phone to display.
4) When the cursor is moved, the highlighted
menu item is announced.
5) Menu readout only to the first sub-level.
1. Press
2. Use
●
,
,
,
.
to select a setting, the press
.
1 Result Displays the name or number that
best matches the one you said.
78
●
4 Results Displays the four names or numbers
that best match the one you said and asks you
if the first one is correct. If you say "Yes," the
phone makes the call. If you say "No," the
7.6 Help
Helps you to use the Voice menu. Activate it by
following the instructions.
1. Press
,
,
,
.
phone suggests the second one in the list, and
so on, up to the fourth result.
8. Location
7.5 Train Words
Menu for GPS (Global Positioning System: Satellite
Command Train is an optional personalization feature
assisted location information system) mode.
that helps your phone recognize the way you
1. Press
2. Use
,
,
.
pronounce commands. If you do not get consistent
good results with the commands, perform this brief,
one-time session.
to select a setting, then press
.
Location On
/
E911 Only
1. Press
,
,
,
.
Note
2. Select a sub-menu, then press
.
GPS satellite signals are not always transmitted, especially
under bad atmospheric and environmental conditions,
indoors etc.
Commands
/
Digits
/
Yes, No
/
Contacts
/
Phone Label
3. Use
to select a setting, then press
.
Training On
/
Training Off
79
PHONE INFO
1. My Phone Number
Phone Info
Allows you to view your phone number.
The Phone Info menu provides you with specific
information pertaining to your phone model.
1. Press
,
,
.
Access and Options
2. S/W Version
1. Press Left Soft Key
Menu
.
Allows you to view the software, PRL, easyedge and
VR.
2. Press
Phone Info
.
1. Press
,
,
.
3. Select a sub-menu.
1. My Phone Number
2. S/W Version
3. Icon Glossary
Allows you to view all the icons and their meanings.
1. Press
,
,
.
3. Icon Glossary
4. Shortcut Help
4. Shortcut Help
Allows you to view condensed information about
using the phone.
1. Press
,
,
.
80
SAFETY
Those standards were based on comprehensive and
TIA Safety Information
periodic evaluations of the relevant scientific
The following is the complete TIA Safety Information
literature. For example, over 120 scientists, engineers,
for wireless handheld phones.
and physicians from universities, government health
agencies, and industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
Exposure to Radio Frequency Signal
Your wireless handheld portable phone is a low power
radio transmitter and receiver. When ON, it receives
and sends out Radio Frequency (RF) signals.
The design of your phone complies with the FCC
guidelines (and those standards).
Antenna Care
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines
with safety levels for handheld wireless phones.
Those guidelines are consistent with the safety
standards previously set by both U.S. and
international standards bodies:
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may
violate FCC regulations.
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Phone Operation
NORMAL POSITION: Hold the phone as you would
any other telephone with the antenna pointed up
and over your shoulder.
* American National Standards Institute; National
Council on Radiation Protection and Measurements;
International Commission on Non-Ionizing Radiation
Protection
81
SAFETY
Tips on Efficient Operation
may not be shielded against the RF signals from your
wireless phone.
For your phone to operate most efficiently:
Don’t touch the antenna unnecessarily when the
phone is in use. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than otherwise needed.
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6)
inches be maintained between a handheld wireless
phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the
independent research by and recommendations of
Wireless Technology Research.
Driving
Check the laws and regulations on the use of wireless
phones in the areas where you drive and always obey
them. Also, if using your phone while driving, please
observe the following:
Persons with pacemakers:
●
Give full attention to driving -- driving safely is
your first responsibility;
●
Should ALWAYS keep the phone more than six (6)
●
●
inches from their pacemaker when the phone is
Use hands-free operation, if available;
turned ON;
Pull off the road and park before making or
●
Should not carry the phone in a breast pocket;
answering a call if driving conditions or the law
require it.
●
Should use the ear opposite the pacemaker to
minimize the potential for interference;
Electronic Devices
●
Should turn the phone OFF immediately if there is
any reason to suspect that interference is taking
place.
Most modern electronic equipment is shielded from
RF signals. However, certain electronic equipment
82
Hearing Aids
Vehicles
Some digital wireless phones may interfere with some
RF signals may affect improperly installed or
hearing aids. In the event of such interference, you
inadequately shielded electronic systems in motor
may want to consult your service provider (or call the
vehicles. Check with the manufacturer or its
customer service line to discuss alternatives).
representative regarding your vehicle. You should
also consult the manufacturer of any equipment that
has been added to your vehicle.
Other Medical Devices
If you use any other personal medical device, consult
Posted Facilities
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
Turn your phone OFF in any facility where posted
notices so require.
physician may be able to assist you in obtaining this
information.
Aircraft
Health Care Facilities
FCC regulations prohibit using your phone while in
Turn your phone OFF in health care facilities when
the air. Switch OFF your phone before boarding an
any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may use
aircraft.
Blasting Areas
equipment that could be sensitive to external RF
energy.
To avoid interfering with blasting operations, turn
your phone OFF when in a “blasting area” or in areas
posted: “Turn off two-way radio”. Obey all signs and
instructions.
83
SAFETY
Potentially Explosive Atmosphere
Safety Information
Turn your phone OFF when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Please read and observe the following information for
safe and proper use of your phone and to prevent
damage. Also, keep the user guide in an accessible
place at all times after reading it.
Caution! Violation of the instructions may
cause minor or serious damage to the product.
Areas with a potentially explosive atmosphere are
often, but not always marked clearly. Potential areas
may include: fueling areas (such as gasoline stations);
below deck on boats; fuel or chemical transfer or
storage facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where the air
contains chemicals or particles (such as grain, dust,
or metal powders); and any other area where you
would normally be advised to turn off your vehicle
engine.
Charger and Adapter Safety
●
The charger and adapter are intended for indoor
use only.
●
Insert the battery pack charger vertically into the
wall power socket.
●
Use the correct adapter for your phone when
using the battery pack charger abroad.
●
Only use the approved battery charger. Otherwise,
For Vehicles Equipped with an Air Bag
you may cause serious damage to your phone.
An air bag inflates with great force. DO NOT place
objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air
Battery Information and Care
●
Please dispose of your battery properly or take it
to your local wireless carrier for recycling.
bag deployment area. If in-vehicle wireless equipment
is improperly installed and the air bag inflates, serious
●
The battery doesn't need to be empty before
84
●
●
●
●
Use only LG-approved chargers specific to your
phone model since they are designed to maximize
battery life.
Unplug the power cord prior to cleaning your
phone, and clean the power plug pin when it’s dirty.
When using the power plug, ensure that it’s firmly
connected. If not, it may cause excessive heat or fire.
●
●
●
Do not disassemble or short-circuit the battery.
Keep the battery’s metal contacts clean.
If you put your phone in a pocket or bag without
covering the receptacle of the phone (power plug
pin), metallic articles (such as a coin, paperclip or
pen) may short-circuit the phone. Always cover the
receptacle when not in use.
Replace the battery when it no longer provides
acceptable performance. The battery can be
recharged several hundred times before replacement.
●
●
●
Recharge the battery after long periods of non-use
●
Don’t short-circuit the battery. Metallic articles
such as a coin, paperclip or pen in your pocket or
bag may short-circuit the + and – terminals of the
battery (metal strips on the battery) upon moving.
Short-circuit of the terminal may damage the
battery and cause an explosion.
to maximize battery life.
Battery life will vary due to usage patterns and
environmental conditions.
Use of extended backlighting, Browser, and data
connectivity kits affect battery life and
talk/standby times.
●
Do not disassemble or crush the battery. It may
cause a fire.
●
The self-protection function of the battery cuts the
power of the phone when its operation is in an
abnormal state. In this case, remove the battery
from the phone, reinstall it, and turn the phone on.
General Notice
●
Using a damaged battery or placing a battery in
Explosion, Shock, and Fire Hazards
your mouth may cause serious injury.
●
●
Do not place items containing magnetic
Do not put your phone in a place subject to
components such as a credit card, phone card,
excessive dust and keep the minimum required
85
SAFETY
magnetism of the phone may damage the data
important phone numbers. (Ring tones, text
stored in the magnetic strip.
messages, voice messages, pictures, and videos
could also be deleted.) The manufacturer is not
liable for damage due to the loss of data.
●
●
●
●
Talking on your phone for a long period of time
may reduce call quality due to heat generated
during use.
●
●
●
When you use the phone in public places, set the
ringtone to vibration so you don't disturb others.
When the phone is not used for a long period
time, store it in a safe place with the power cord
unplugged.
Do not turn your phone on or off when putting it
to your ear.
Using the phone in proximity to receiving
Use accessories, such as earphones and headsets,
equipment (i.e., TV or radio) may cause
interference to the phone.
with caution. Ensure that cables are tucked away
safely and do not touch the antenna unnecessarily.
Do not use the phone if the antenna is damaged.
If you are listening to music whilst out and about,
If a damaged antenna contacts skin, it may cause a
please ensure that the volume is at a reasonable level
slight burn. Please contact an LG Authorized
Service Center to replace the damaged antenna.
so that you are aware of your surroundings. This is
particularly imperative when attempting to cross the
street.
●
Do not immerse your phone in water. If this
happens, turn it off immediately and remove the
Avoid damage to your hearing
battery. If the phone does not work, take it to an
LG Authorized Service Center.
Damage to your hearing can occur if you are exposed
to loud sound for long periods of time. We therefore
recommend that you do not turn on or off the
handset close to your ear. We also recommend that
music and call volumes are set to a reasonable level.
●
●
Do not paint your phone.
The data saved in your phone might be deleted
due to careless use, repair of the phone, or
upgrade of the software. Please backup your
86
2. What is the FDA's role concerning the safety of
wireless phones?
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for
Devices and Radiological Health Consumer Update
on Mobile Phones:
Under the law, the FDA does not review the safety of
radiation-emitting consumer products such as
wireless phones before they can be sold, as it does
with new drugs or medical devices. However, the
agency has authority to take action if wireless phones
are shown to emit Radio Frequency (RF) energy at a
level that is hazardous to the user. In such a case, the
FDA could require the manufacturers of wireless
phones to notify users of the health hazard and to
repair, replace, or recall the phones so that the
hazard no longer exists.
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones
emit low levels of Radio Frequency (RF) energy in the
microwave range while being used. They also emit
very low levels of RF when in standby mode. Whereas
high levels of RF can produce health effects (by
heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
Although the existing scientific data do not justify
FDA regulatory actions, the FDA has urged the
wireless phone industry to take a number of steps,
including the following:
●
Support needed research into possible biological
RF exposure to the user that is not necessary for
device function; and
effects of RF of the type emitted by wireless
phones;
●
Design wireless phones in a way that minimizes any
87
SAFETY
●
Cooperate in providing users of wireless phones
questions about wireless phones.
with the best possible information on possible
effects of wireless phone use on human health.
The FCC also regulates the base stations that the
wireless phone networks rely upon. While these base
The FDA belongs to an interagency working group of
stations operate at higher power than do the wireless
the federal agencies that have responsibility for
phones themselves, the RF exposures that people get
different aspects of RF safety to ensure coordinated
from these base stations are typically thousands of
efforts at the federal level. The following agencies
belong to this working group:
times lower than those they can get from wireless
phones. Base stations are thus not the subject of the
safety questions discussed in this document.
●
National Institute for Occupational Safety and
Health
3. What kinds of phones are the subject of this
update?
●
●
●
Environmental Protection Agency
The term “wireless phone” refers here to handheld
wireless phones with built-in antennas, often called
“cell”, “mobile”, or “PCS” phones. These types of
Occupational Safety and Health Administration
National Telecommunications and Information
Administration
wireless phones can expose the user to measurable
Radio Frequency (RF) energy because of the short
distance between the phone and the user’s head.
The National Institutes of Health participates in
some interagency working group activities, as well.
These RF exposures are limited by FCC safety
guidelines that were developed with the advice of the
FDA and other federal health and safety agencies.
When the phone is located at greater distances from
the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly
The FDA shares regulatory responsibilities for wireless
phones with the Federal Communications
Commission (FCC). All phones that are sold in the
United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on
the FDA and other health agencies for safety
88
with increasing distance from the source. The so-
conditions under which people use wireless phones,
called “cordless phones,” which have a base unit
so we do not know with certainty what the results of
connected to the telephone wiring in a house,
such studies mean for human health. Three large
typically operate at far lower power levels, and thus
epidemiology studies have been published since
produce RF exposures far below the FCC safety
December 2000. Between them, the studies
limits.
investigated any possible association between the
use of wireless phones and primary brain cancer,
glioma, meningioma, or acoustic neuroma, tumors of
the brain or salivary gland, leukemia, or other
cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless
phone RF exposures. However, none of the studies
can answer questions about long-term exposures,
since the average period of phone use in these
studies was around three years.
4. What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of Radio Frequency (RF)
energy exposures characteristic of wireless phones
have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
5. What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
A combination of laboratory studies and
increased tumor development used animals that had
epidemiological studies of people actually using
been genetically engineered or treated with cancer-
wireless phones would provide some of the data that
causing chemicals so as to be pre-disposed to
are needed. Lifetime animal exposure studies could
develop cancer in the absence of RF exposure. Other
be completed in a few years. However, very large
studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
89
SAFETY
exists. Epidemiological studies can provide data that
development of a detailed agenda of research needs
is directly applicable to human populations, but ten
that has driven the establishment of new research
or more years follow-up may be needed to provide
programs around the world. The project has also
answers about some health effects, such as cancer.
helped develop a series of public information
documents on EMF issues.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop — if they do — may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
The FDA and the Cellular Telecommunications &
Internet Association (CTIA) have a formal
Cooperative Research And Development Agreement
(CRADA) to do research on wireless phone safety.
The FDA provides the scientific oversight, obtaining
input from experts in government, industry, and
academic organizations. CTIA-funded research is
conducted through contracts with independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone
users. The CRADA will also include a broad
assessment of additional research needs in the
context of the latest research developments around
the world.
6. What is the FDA doing to find out more about
the possible health effects of wireless phone RF?
The FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to Radio Frequency (RF) energy.
The FDA has been a leading participant in the World
Health Organization International Electro Magnetic
Fields (EMF) Project since its inception in 1996. An
90
7. How can I find out how much Radio Frequency
energy exposure I can get by using my wireless
phone?
8. What has the FDA done to measure the Radio
Frequency energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers
(IEEE) is developing a technical standard for
All phones sold in the United States must comply with
measuring the Radio Frequency (RF) energy exposure
from wireless phones and other wireless handsets
Federal Communications Commission (FCC)
guidelines that limit Radio Frequency (RF) energy
exposures. The FCC established these guidelines in
with the participation and leadership of FDA
consultation with the FDA and the other federal
scientists and engineers. The standard,
health and safety agencies. The FCC limit for RF
exposure from wireless phones is set at a Specific
Absorption Rate (SAR) of 1.6 watts per kilogram (1.6
W/kg). The FCC limit is consistent with the safety
standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National
Council on Radiation Protection and Measurement.
The exposure limit takes into consideration the body’s
ability to remove heat from the tissues that absorb
energy from the wireless phone and is set well below
levels known to have effects. Manufacturers of wireless
phones must report the RF exposure level for each
model of phone to the FCC. The FCC website
“Recommended Practice for Determining the Spatial-
Peak Specific Absorption Rate (SAR) in the Human
Body Due to Wireless Communications Devices:
Experimental Techniques”, sets forth the first
consistent test methodology for measuring the rate
at which RF is deposited in the heads of wireless
phone users. The test method uses a tissue-
simulating model of the human head. Standardized
SAR test methodology is expected to greatly improve
the consistency of measurements made at different
laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in
tissue, either by the whole body or a small part of
the body. It is measured in watts/kg (or milliwatts/g)
of matter. This measurement is used to determine
whether a wireless phone complies with safety
(
http://www.fcc.gov/oet/rfsafety) gives directions for
locating the FCC identification number on your phone
so you can find your phone’s RF exposure level in the
91
SAFETY
9. What steps can I take to reduce my exposure to
10. What about children using wireless phones?
Radio Frequency energy from my wireless phone?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower
exposure to Radio Frequency (RF) energy, the
measures described above would apply to children
and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the
distance between the user and the RF source will
reduce RF exposure.
If there is a risk from these products — and at this
point we do not know that there is — it is probably
very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps
to minimize your exposure to Radio Frequency (RF)
energy. Since time is a key factor in how much
exposure a person receives, reducing the amount of
time spent using a wireless phone will reduce RF
exposure. If you must conduct extended
Some groups sponsored by other national
conversations by wireless phone every day, you could
place more distance between your body and the
source of the RF, since the exposure level drops off
dramatically with distance. For example, you could
use a headset and carry the wireless phone away
from your body or use a wireless phone connected to
a remote antenna. Again, the scientific data do not
demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these
products, you can use measures like those described
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based
on scientific evidence that any health hazard exists.
above to reduce your RF exposure from wireless
phone use.
92
11. What about wireless phone interference with
medical equipment?
at the same time. This standard was approved by the
IEEE in 2000.
The FDA continues to monitor the use of wireless
phones for possible interactions with other medical
devices. Should harmful interference be found to
occur, the FDA will conduct testing to assess the
interference and work to resolve the problem.
Radio Frequency (RF) energy from wireless phones
can interact with some electronic devices. For this
reason, the FDA helped develop a detailed test
method to measure Electro Magnetic Interference
(EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test
method is now part of a standard sponsored by the
Association for the Advancement of Medical
Instrumentation (AAMI). The final draft, a joint effort
by the FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI.
12. Where can I find additional information?
For additional information, please refer to the
following resources:
FDA web page on wireless phones
(http://www.fda.gov/cellphones/)
Federal Communications Commission (FCC) RF
Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation
Protection
The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a
(http://www.icnirp.de)
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance
requirements for hearing aids and wireless phones so
that no interference occurs when a person uses a
“compatible” phone and a “compatible” hearing aid
World Health Organization (WHO) International EMF
Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.hpa.org.uk/radiation/)
93
SAFETY
3. Make sure you place your wireless phone within
easy reach and where you can reach it without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, if possible,
let your voicemail answer it for you.
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to
communicate by voice almost anywhere, anytime. An
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
When operating a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, and ice can be
hazardous, but so is heavy traffic. As a driver, your
first responsibility is to pay attention to the road.
1. Get to know your wireless phone and its features
such as speed dial and redial. Carefully read your
instruction manual and learn to take advantage of
valuable features most phones offer, including
automatic redial and memory. Also, work to
memorize the phone keypad so you can use the
speed dial function without taking your attention
off the road.
5. Don’t take notes or look up phone numbers while
driving. If you are reading an address book or
business card, or writing a “to-do” list while driving
a car, you are not watching where you are going. It
is common sense. Do not get caught in a
dangerous situation because you are reading or
writing and not paying attention to the road or
nearby vehicles.
2. When available, use a hands-free device. A number
of hands-free wireless phone accessories are
readily available today. Whether you choose an
installed mounted device for your wireless phone
or a speaker phone accessory, take advantage of
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
94
pulling into traffic. Try to plan your calls before
9. Use your wireless phone to help others in
you begin your trip or attempt to coincide your
emergencies. Your wireless phone provides you a
calls with times you may be stopped at a stop
perfect opportunity to be a “Good Samaritan” in
sign, red light, or otherwise stationary. But if you
your community. If you see an auto accident, crime
need to dial while driving, follow this simple tip --
in progress or other serious emergency where lives
dial only a few numbers, check the road and your
mirrors, then continue.
are in danger, call 911 or other local emergency
number, as you would want others to do for you.
7. Do not engage in stressful or emotional
10. Call roadside assistance or a special wireless non-
conversations that may be distracting. Stressful or
emergency assistance number when necessary.
emotional conversations and driving do not mix;
Certain situations you encounter while driving
they are distracting and even dangerous when you
may require attention, but are not urgent enough
are behind the wheel of a car. Make people you
to merit a call for emergency services. But you
are talking with aware you are driving and if
can still use your wireless phone to lend a hand.
necessary, suspend conversations which have the
If you see a broken-down vehicle posing no
potential to divert your attention from the road.
serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a
vehicle you know to be stolen, call roadside
assistance or other special non-emergency
wireless number.
8. Use your wireless phone to call for help. Your
wireless phone is one of the greatest tools you can
own to protect yourself and your family in
dangerous situations -- with your phone at your
side, help is only three numbers away. Dial 911 or
For more information, please call to 888-901-SAFE,
or visit our website http://www.ctia.org.
other local emergency number in the case of fire,
traffic accident, road hazard, or medical
emergency. Remember, it’s a free call on your
wireless phone!
95
SAFETY
SAR is determined at the highest certified power
level, the actual SAR level of the phone while
Consumer Information on SAR
(Specific Absorption Rate)
operating can be well below the maximum value.
This model phone meets the government's
Because the phone is designed to operate at multiple
requirements for exposure to radio waves. Your
power levels to use only the power required to reach
wireless phone is a radio transmitter and receiver. It is
the network, in general, the closer you are to a
designed and manufactured not to exceed the
wireless base station antenna, the lower the power
output.
emission limits for exposure to Radio Frequency (RF)
energy set by the Federal Communications
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required
by the FCC for each model.
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on standards
that were developed by independent scientific
organizations through periodic and thorough
evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The highest SAR value for this model phone when
tested for use at the ear is 1.21 W/kg and when
worn on the body, as described in this user guide, is
1.28W/kg (body-worn measurements differ among
phone models, depending upon available accessories
and FCC requirements). While there may be
differences between SAR levels of various phones and
at various positions, they all meet the government
requirement for safe exposure.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg. Tests for SAR are conducted using
standard operating positions specified by the FCC
with the phone transmitting at its highest certified
96
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is
on file with the FCC and can be found under the
Display Grant section of
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications
Commission (FCC) Report and Order in WT Docket
01-309 modified the exception of wireless phones
under the Hearing Aid Compatibility Act of 1988
(HAC Act) to require digital wireless phones be
compatible with hearing-aids. The intent of the HAC
Act is to ensure reasonable access to
http://www.fcc.gov/oet/fccid after searching on FCC
ID BEJVX4700. Additional information on Specific
Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
http://www.ctia.org/
telecommunications services for persons with hearing
disabilities.
In the United States and Canada, the SAR limit for
*
While some wireless phones are used near some
hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining
noise. Some hearing devices are more immune than
others to this interference noise, and phones also
vary in the amount of interference they generate.
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety
to give additional protection for the public and to
account for any variations in measurements.
The wireless telephone industry has developed a
rating system for wireless phones, to assist hearing
device users to find phones that may be compatible
with their hearing devices. Not all phones have been
rated. Phones that are rated have the rating on their
box or a label located on the box.
97
SAFETY
The ratings are not guarantees. Results will vary
depending on the user's hearing device and hearing
loss. If your hearing device happens to be vulnerable
to interference, you may not be able to use a rated
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your
personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that are
not labeled. M4 is the better/higher of the two
ratings.
In the above example, if a hearing aid meets the M2
level rating and the wireless phone meets the M3
level rating, the sum of the two values equal M5. This
should provide the hearing aid user with “normal
usage” while using their hearing aid with the
particular wireless phone. “Normal usage” in this
context is defined as a signal quality that is
acceptable for normal operation.
Hearing devices may also be rated. Your hearing
device manufacturer or hearing health professional
may help you find this rating. Higher ratings mean
that the hearing device is relatively immune to
interference noise. The hearing aid and wireless
phone rating values are then added together. A sum
of 5 is considered acceptable for normal use. A sum
of 6 is considered for best use.
The M mark is intended to be synonymous with the
U mark. The T mark is intended to be synonymous
with the UT mark. The M and T marks are
recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The
U and UT marks are referenced in Section 20.19 of
the FCC Rules. The HAC rating and measurement
procedure are described in the American National
98
Standards Institute (ANSI) C63.19 standard.
For information about hearing aids and digital
wireless phones
FCC Hearing Aid Compatibility and Volume
Control
http://www.fcc.gov/cgb/dro/hearing.html
Gallaudet University, RERC
http://tap.gallaudet.edu/DigWireless.KS/DigWireless.htm
HLAA (Hearing Loss Association of America)
http://www.hearingloss.org/learn/cellphonetech.asp
The Hearing Aid Compatibility FCC Order
http://hraunfoss.fcc.gov/edocs_public/attachmatc
h/FCC-03-168A1.pdf
99
ACCESSORIES
There are a variety of accessories available for your mobile phone. Consult your local dealer for availability.
Optional items are sold separately.
Battery Pack Charger
Battery Charger
The battery pack charger allows you to
charge the battery pack itself without
the phone.
The battery charger allows you to
charge your phone.
Swiwel Holster
Battery
Standard battery and extended battery
Equip a holster with the phone to make
are available.
it stable by attaching it to one place.
Headset
The headset connects to your
phone allowing hands-free
operation. It includes earpiece,
microphone.
100
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS:
(4) The external housing and cosmetic parts shall be
free of defects at the time of shipment and,
therefore, shall not be covered under these
limited warranty terms.
LG offers you a limited warranty that the enclosed
subscriber unit and its enclosed accessories will be
free from defects in material and workmanship,
according to the following terms and conditions:
(5) Upon request from LG, the consumer must
provide information to reasonably prove the date
of purchase.
(1) The limited warranty for the product extends for
TWELVE (12) MONTHS beginning on the date
of purchase of the product with valid proof of
purchase, or absent valid proof of purchase,
FIFTEEN (15) MONTHS from date of
manufacture as determined by the unit’s
manufacture date code.
(6) The customer shall bear the cost of shipping the
product to the Customer Service Department of
LG. LG shall bear the cost of shipping the
product back to the consumer after the
completion of service under this limited warranty.
(2) The limited warranty extends only to the original
purchaser of the product and is not assignable
or transferable to any subsequent purchaser/end
user.
(3) This warranty is good only to the original
purchaser of the product during the warranty
period as long as it is in the U.S, including
Alaska, Hawaii, U.S. Territories and Canada.
101
LIMITED WARRANTY STATEMENT
2. WHAT THIS WARRANTY DOES NOT COVER:
(6) This limited warranty is in lieu of all other
warranties, express or implied either in fact or by
operations of law, statutory or otherwise,
(1) Defects or damages resulting from use of the
product in other than its normal and customary
manner.
including, but not limited to any implied warranty
of marketability or fitness for a particular use.
(2) Defects or damages from abnormal use,
abnormal conditions, improper storage,
(7) Damage resulting from use of non-LG approved
accessories.
exposure to moisture or dampness,
unauthorized modifications, unauthorized
connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper
installation, or other acts which are not the fault
of LG, including damage caused by shipping,
blown fuses, spills of food or liquid.
(8) All plastic surfaces and all other externally
exposed parts that are scratched or damaged
due to normal customer use.
(9) Products operated outside published maximum
ratings.
(10) Products used or obtained in a rental program.
(3) Breakage or damage to antennas unless caused
directly by defects in material or workmanship.
(11) Consumables (such as fuses).
(4) That the Customer Service Department at LG
was not notified by consumer of the alleged
defect or malfunction of the product during the
applicable limited warranty period.
(5) Products which have had the serial number
removed or made illegible.
102
3. STATE LAW RIGHTS:
4. HOW TO GET WARRANTY SERVICE:
No other express warranty is applicable to this
To obtain warranty service, please call or fax to the
product. THE DURATION OF ANY IMPLIED
following telephone numbers from anywhere in the
continental United States:
WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY, IS LIMITED TO
THE DURATION OF THE EXPRESS WARRANTY
HEREIN. LGE MOBILECOMM USA INC. SHALL NOT
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
Or visit http://us.lgservice.com. Correspondence may
also be mailed to:
BE LIABLE FOR THE LOSS OF THE USE OF THE
PRODUCT, INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,
LG Electronics Service- Mobile Handsets
P.O. Box 240007, Huntsville, AL 35824
ARISING OUT OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY,
DO NOT RETURN YOUR PRODUCT TO THE
ABOVE ADDRESS. Please call or write for the
location of the LG authorized service center nearest
INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS PRODUCT.
you and for the procedures for obtaining warranty
claims.
Some states do not allow the exclusive limitation of
incidental or consequential damages or limitations on
how long an implied warranty lasts; so these
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
103
INDEX
Contacts
Contrast
36
71
Lock Mode
Lock Phone
20
73
A
G
Accessories
100
76
63
78
75
75
72
76
Groups
37
60
Airplane Mode
Alarm Clock
Announce Alerts
Answer Call
D
M
H
Data Settings
Dialed Calls
Display
77
39
69
69
Manner Mode
20
61
70
14
68
42
40
50
38
80
64
Help
Media
Auto Answer
Auto NAM
Menu Style
I
DTMF Length
Menus Overview
Message Alerts
Messages
Icon Glossary
80
61
9
Auto Volume
Images
E
Important Information
Missed Calls
Msg Settings
My Contact Info
My Phone Number
My Shortcut
B
E-mail
37
59
74
51
40
74
65
Important Safety
Precautions
SM
Backlight
69
69
16
17
78
easyedge
1
47
16
Banner
Emergency #s
Erase All
Inbox
Battery
Installing the Battery
Battery Charge Level
Best Match
Erase Calls
Erase Contacts
Ez Tip Calc
K
N
KB Counter
41
67
Notepad
64
37
C
Key Tone
Number
F
Calculator
65
75
40
74
17
70
Call Setup
FCC Part 15 Class B
Compliance
L
9
O
Call Timer
Language
71
36
79
FCC RF Exposure
Information
Change Lock
Charging the Battery
Clocks
One-Touch Dial
75
49
List Contacts
Location
11
Outbox
Fonts
71
104
Settings
67
80
P
V
Shortcut Help
Sound Modes
Sounds
Phone Info
80
12
46
69
72
Voice Commands
77
43
64
77
68
78
Phone Overview
Voice Mail
61, 67
38
Photo Msg
Voice Memo
Voice Services
Volume
Speed Dials
Power On/Off Tone
Power Saver
SM
SpeedTalk
52
System
72
R
W
T
Received Calls
40
39
World Clock
66
Table of Contents
Technical Details
Text Input
4
Recent Calls
9
Removing the Battery 16
22
44
70
Reset Default
Restrict Calls
Ringers
74
73
67
Text Msg
Theme Colors
Tools
62
79
76
Train Words
TTY Mode
S
S/W Version
80
50
Turning the Phone On and
Saved
Off
17
Schedule
62
Screen Icons
18
Screens
70
Security
73
Service Alerts
68
72
Set NAM
105
|