Centurion 531
English
Warranty Information
Cooler Master guarantees that this device is free of defect in material and workmanship,
and provides a two-year limited hardware warranty for the device commencing from the
date of purchase. Please keep your receipt for proof of purchase.
This product is designed for computer usage only. Using this device in any other capacity
voids the warranty. If you are not familiar with computer hardware installation, please ask
for professional assistance.
The warranty offered covers normal use. Defect or damage that result from improper
operation, storage, misuse or abuse, accident or neglect, which are not the fault of Cooler
Master, are exclude from warranty coverage.
Note: the warranty is voided by removal or alternation of product or parts identification labels.
Chapter 1: Product Overview
Specifications:
Available Color
Dimensions
Weight
Silver/Black
L485 x W208 x H442 mm
10kg
Material
M/B Type
5.25"
Aluminum bezel, SECC chassis
ATX 12” x 9.6” (30.5cm x 24.5 cm);Micro-ATX
5 (Exposed)
3.5"
1 (Exposed); 5 (Hidden)
Cooling System
One 120x120x25mm front fan ( Intake);
One 120x120x25mm rear fan ( Exhaust ) (optional)
USB2.0 x 2; MIC x 1; SPK x 1; IEEE1394 x 1
Standard ATX PS2, 380W or 430W (optional)
I/O Panel
Power Supply
1
Centurion 531
English
Installing the Motherboard
1. Remove the side casing.
2. Lie down the casing.
3. Aiming at the holes on the PCB, and
secure the alumnus post with screws.
4. Align the holes of PCB and casing.
Secure them by fastening screws on the
PCB.
Install add-on card
1. Press to loosen the latch on the inner casing.
2. Insert the add-on card.
1. Lock the latch back from the outside of the casing.
Installing Drives (CD-ROM, FDD and HDD)
After removing the side casing on both
sides, manually loosen the latch of the panel
card inside the casing, and you may remove
the panel card.
3
Centurion 531
English
1. Installing Hardware Device on 5.25"3.5" or "HDD" bracket-- Layer III, IV, or V.
2. Insert the hardware device in place; align the screw holes of the device with those of
the HDD rack.
3. Push forward the plastic handling and tightening it.
4. Push the lock and the installation is done.
Installing the power device
1. Remove side casing.
2. Place the power supply on the power
rack with the wiring end facing forward
and connect it to the back of the casing.
3. Secure the power supply device with
screws.
4. Assemble the side casing and the
installation is done.
4
Centurion 531
English
Replacing/Installing the Case Fan
Change the Front Fan
1. Remove the side casing.
2. Loosen the lower and side screws to
remove the HDD bracket.
3. Loosen the fan screws from the front
casing, and then remove the fan.
4. Install the new fan and secure it with
screws. Continue to put it back on the
HDD rack and secure it with screws.
Change the Rear Fan
1. Loosen the fan screws from the rear casing
and remove the fan.
2. Install the new fan and secure it with
screws.
1. Take out the HDD rail from the
package. Install it on the HDD and
have the screw holes aligned.
2. Insert the assembled HDD into the
hardware rack.
5
Centurion 531
English
I/O Function Panel Installation Guide
ꢀ
Please refer to the illustration on the section of USB2.0, IEEE 1394a, and Audio
connector from the motherboard user’s manual. Please select the motherboard which
used the same USB2.0, IEEE1394, AC’97 standard as below; otherwise, it will
cause damages to user’s device(s).
ꢀ
ꢀ
The following illustration is a connection diagram for the front panel I/O cable.
NEVER connect an IEEE1394 cable to the USB2.0 connector. Doing so will
damage the device.
ꢀ
ꢀ
NEVER connect a USB2.0 cable to the IEEE1394 connector. Doing so will damage
the device.
On some motherboards, the connectors for IEEE1394, USB2.0 and Audio are not the
same as the drawing below. Please check with your motherboard manual before
installing.
Cable
Mother Board
Appendix
IEEE 1394 Connector
Front panel IEEE 1394 connector
No Pin
Pin
Front panel USB connector
USB Connector
No Pin
Pin
Front panel audio connector
Front panel audio connector (BLACK)
No Pin
Contact us:
Email: [email protected]
Headquarters, Taiwan
Tel: +886 2 32340050
Fax: +886 2 32340221
6
|