LG Electronics LG Lifes Good Cell Phone 800G User Manual

-
English  
LG800G User Guide  
Some of the contents in this manual may differ from your phone depending  
on the software of the phone or your service provider.  
Phone Components  
Earpiece  
Call key  
Dials a phone number and answers  
incoming calls.  
Clear key  
Go back to a previous screen.  
End key  
Power/Lock key  
Short press to turn on/off the  
screen.  
Volume keys  
When the screen is  
at the Home screen:  
Ring tone and touch tone  
volume.  
Long press for power on/off.  
During a call: Earpiece  
volume.  
Down volume key: Press  
and hold to activate/  
deactivate Silent mode.  
Handsfree or Stereo  
earphone connector  
Using your touch screen  
Touch screen tips  
To select an item, touch the center  
of the icon.  
Do not press too hard. The  
touchscreen is sensitive enough to  
pick up a light, firm touch.  
Use the tip of your finger to touch  
the option you require. Be careful  
not to touch any other keys.  
Whenever your LG800G is not in  
use, it will return to the lock screen.  
Control the touch screen  
The controls on the LG800G  
touch screen change dynamically  
depending on the task you are  
carrying out.  
Idle Screen Shortcut  
Call Shortcut Icon  
Contact Shortcut Icon  
Messages Shortcut Icon  
Menu Shortcut Icon  
Menu Map  
Screen 1  
Screen 2  
Prepaid  
My Stuff  
Contacts  
Messages  
Voice Call  
Recent Calls  
Camera  
Voice Recorder  
Calendar  
Tasks  
Memo  
Profiles  
Gallery  
Music  
Games & Apps  
Alarms  
Browser  
Settings  
Bluetooth  
Calculator  
World Clock  
Stopwatch  
Unit Converter  
3 From the filtered list, touch the Call  
icon next to the contact you want  
to call. The call will use the default  
number if there is more than one  
for that contact.  
4 Or, you can touch the contact  
name and select the number to  
use if there is more than one for  
that contact to use. You can also  
Calls  
Making a Call  
1 Touch  
2 Key in the number using the  
keypad.  
to open the keypad.  
3 Touch  
to initiate the call.  
TIP! To enter + for making an  
touch  
to initiate the call to the  
international call, press and hold  
default number.  
0+  
.
Answering and rejecting a  
call  
When your phone rings, press  
key to answer the call.  
Press the power key to lock the  
touchscreen to prevent calls being  
made by mistake.  
Making a call from your  
contacts  
1 From the home screen touch  
To mute the ringing, touch on Silent  
tab in alerting screen. This is useful  
if you forgot to change your profile to  
Silent for a meeting. Touch on Reject  
tab to reject an incoming call in  
alerting screen.  
to open the Contacts.  
2 Tap the Name field box on the  
top of the screen and enter the  
first few letters of the contact you  
would like to call using the keypad.  
BT Answer Mode  
Changing the Common  
Settings  
1 Touch Call in the Settings menu.  
2 Scroll and touch Common  
Settings.  
Call Reject - Slide the switch left  
for ON. You can touch the Reject  
list to choose All calls, Contacts,  
Groups, All unknown callers and All  
unknown numbers.  
Send My Number - Choose  
whether to display your number on  
an outgoing call.  
To Answered Device: Allows you  
to answer a call using earpiece  
or a Bluetooth headset. You can  
press  
key to answer a call  
using earpiece or you can press a  
hook key on a Bluetooth headset  
to answer a call using a call using  
earpiece.  
Always to Handsfree: Allows you  
to answer a call using a Bluetooth  
headset.  
Always to Handset: Allows you to  
answer a call using earpiece.  
Save New Number - Select ON or  
OFF to save a new number.  
Auto-Redial - Slide the switch left  
for ON or right for OFF.  
Answer Mode  
Press Send Key: Allows you to  
only answer an incoming call by  
Contacts  
pressing the  
key.  
Searching for a contact  
1 Touch Contacts.  
2 You see a list of contacts. Typing  
in the first letter of a contact’s  
name in the Name field will jump  
the menu to that alphabetical area  
of the list.  
Press Any Key: Allows you to  
answer an incoming call by  
pressing any key, except the  
key.  
Minute Minder - Slide the switch  
left to ON to hear a tone every  
minute during a call.  
Copy - Copy your contacts from  
your SIM to Internal memory, or  
vice versa.  
Adding a new contact  
1 Touch Contacts and touch Add.  
2 Choose whether to save the  
contact to your Internal memory  
or SIM.  
3 Enter your first and last name.  
4 You can enter up to five different  
numbers per contact.  
5 Add an email addresses. You can  
enter up to two different email  
addresses per contact.  
6 Assign the contact to one or more  
groups.  
Move - This works in the same way  
as Copy, but the contact is stored  
at the new location only. Therefore,  
once a contact is moved from the  
SIM to the Internal memory it will be  
deleted from the SIM memory.  
Send all contacts via Bluetooth -  
Sends all contacts to other handset  
via Bluetooth.  
Backup Contacts / Restore  
Contacts - Save or restore the  
contacts data to the other storage.  
Clear Contacts - Delete all your  
contacts. Touch Yes if you are sure  
you want to delete all your contacts.  
7 Touch Save to save the contact.  
Changing your contact  
settings  
You can adapt your contact settings  
so that your Contacts suits your own  
preferences.  
Messaging  
Your LG800G combines SMS and  
MMS into one intuitive and easy-to-  
use menu.  
Touch Options key  
and touch  
Settings.  
Sending a message  
Display name - Choose whether  
to display the first or last name of a  
contact first.  
1 Touch Messages in menu  
and touch Message to begin  
composing a new message.  
8
2 Touch Insert to add an image,  
video, sound, template and so on.  
3 Touch To at the top of the screen  
to enter the recipients. Then enter  
Handwriting recognition  
In Handwriting mode you simply write  
on the screen and your LG800G will  
convert your handwriting into your  
message.  
the number or touch  
to select  
a contact. You can even add  
multiple contacts.  
4 Touch Send when ready.  
Setting up your email  
Touch E-mail in menu.  
If the email account is not set up,  
start the email set up wizard and  
finish it.  
You can check and edit settings also  
you can check the additional settings  
that were filled in automatically when  
you created the account.  
WARNING: If an image, video  
or sound is added to an SMS it  
will be automatically converted to  
an MMS and you will be charged  
accordingly.  
Entering Text  
You can choose your input method by  
Changing your text message  
settings  
Touch Messages and touch  
Settings. Select Text Message.  
Text Message Center - Enter the  
details of your message center.  
Email Gateway - Input your email  
gateway number.  
tapping  
Touch  
and Input method.  
to turn on Tꢆ mode. This  
icon is only shown when you choose  
Keypad as the input method.  
Touch to  
change between  
numbers, symbols and text input.  
Use Shift key to change between  
capital or lowercase input.  
Character Encoding - Choose how  
your characters are encoded. This  
impacts the size of your messages  
and therefore data charges.  
Send Long Text As - Choose to send  
long messages as Multiple SMS or  
as an MMS.  
Camera  
Taking a quick photo  
1 Touch Camera menu.  
2 When the camera has focused on  
your subject, touch the  
right-center of the screen to take  
a photo.  
on the  
Changing your multimedia  
message settings  
Touch Messages and, touch  
TIP: To switch to the camera  
mode or video mode, slide  
up/down the camera or video  
icon on the center-right of the  
viewfinder.  
Settings and Multimedia Message.  
Validity Period - Choose how  
long your message is stored at the  
message center.  
Slide Duration - Choose how long your  
slides appear on the screen.  
After taking a photo  
Your captured photo will appear on  
the screen.  
The following options are available.  
Touch to delete the image.  
Unsupported Attachment - Choose  
whether the unsupported attachment  
is restricted or not.  
Delivery Time - Choose how long to  
wait before a message is delivered.  
Touch to take another photo  
immediately.  
Touch to view a gallery of your  
saved photos.  
Touch  
.
10  
Send - Touch to send the photo as a Self-timer - The self-timer allows  
Message or via Bluetooth.  
you to set a delay after the shutter  
is pressed. Select Off, ꢁ seconds, ꢃ  
seconds, or 10 seconds. This is ideal  
if you want to be included in a photo.  
Use As - Touch to set as Homescreen  
Wallpaper, Lockscreen Wallpaper,  
Contacts Image, Incoming Call Image  
and Outgoing call image.  
Night Mode - Useful to user in dark  
places.  
Rename - Touch to rename the  
photo.  
Image Quality - Choose between  
Super fine, Fine, and Normal. The  
finer the quality, the sharper the  
photo. However, the file size will  
increase as a result, which means  
you’ll be able to store fewer photos in  
the memory.  
Select Storage - Choose whether  
to save your photos to the Handset  
memory or to the External memory.  
Edit - Touch to edit the photo.  
Using the advanced settings  
From the viewfinder, touch  
open all advanced settings options.  
After selecting the option, touch the  
OK button.  
Size - Change the size of the photo  
to save memory  
to  
Hide Icons - Choose the camera  
setting icons to hide manually or  
automatically.  
White balance - Choose between  
Auto, Incandescent, Sunny,  
Fluorescent, and Cloudy.  
Show Captured Image - Choose On  
to check the picture you took right  
away.  
Shutter Sound - Select one of the  
three shutter sounds.  
Color Effect - Choose a color tone  
for your new photo.  
Continuous Shot - Position the  
subject in the viewfinder, then press  
the capture button as if taking a  
normal photo. The camera will take  
shots in quick succession.  
11  
Grid screen - Choose between Off,  
Simple cross, or Trisection.  
Reset Settings - Restore all camera  
default settings.  
After making a video  
A still image representing your  
captured video will appear on the  
screen. The name of the video runs  
along the bottom of the screen  
together with icons down the left and  
right sides.  
Video camera  
Touch to play the video.  
The following options are available.  
Making a quick video  
To switch to the camera mode or  
video mode, slide up/down the  
camera or video icon on the right  
center of the viewfinder.  
1 Holding the phone horizontally,  
point the lens towards the subject  
of the video.  
Touch to delete the video you  
have just made and confirm by  
touching Yes. The viewfinder will  
reappear.  
Touch to shoot another video  
immediately. Your current video will  
be saved.  
2 Press the red dot  
.
Touch to view a gallery of saved  
videos and images.  
3
REC will appear at the bottom  
of the viewfinder with a timer at  
the bottom showing the length of  
the video.  
Touch  
.
Send - Touch to send the video as a  
Message or via Bluetooth.  
Rename - Touch to rename the  
video.  
4 To pause the video, touch and  
resume by selecting  
.
5 Touch on screen to stop video  
recording.  
1ꢀ  
Select Storage - Choose whether  
to save your videos to the Handset  
memory or to the External memory.  
Audio Recording - Choose Mute to  
record a video without sound.  
Hide Icons - Select whether to  
hide the icons in the camera menu  
automatically or manually.  
Reset Settings - Reset all the video  
camera settings.  
Using the advanced settings  
From the viewfinder, touch  
to  
open all advanced settings options.  
You can change the video camera  
setting after selecting the option,  
touch the OK button.  
Color Effect - Choose a color tone to  
use for your new view.  
White Balance - The white balance  
ensures any the white areas in your  
video are realistic. To enable your  
camera to adjust the white balance  
correctly, you may need to determine  
the light conditions. Choose  
Music  
To access the music player, touch  
Music. From here, you can access a  
number of folders:  
Recently Played - Plays the songs  
you have played recently.  
All Tracks - Contains the songs you  
have on your phone except the pre-  
loaded default music.  
Artists - Browse through your music  
collection by artist.  
between Auto, Incandescent, Sunny,  
Fluorescent, and Cloudy.  
Quality - Choose between Super fine,  
Fine and Normal. The finer the quality,  
the sharper a video will be, but the  
file size will increase. As a result, you  
will be able to store fewer videos in  
the phone’s memory.  
Duration - Set a duration limit for  
your video. Choose between Normal  
and MMS to limit the maximum size  
to send as an MMS message.  
Albums - Browse through your music  
collection by album.  
1ꢁ  
Genres - Browse through your music  
collection by genre.  
Playlists - Contains all the playlists  
you have created.  
NOTE: If the file size is more  
smaller than ꢁ00Kb, it will be not  
displayed in Music.  
Shuffle Tracks - Play your tracks in a  
random order.  
Managing files  
Transferring music onto your  
phone  
The easiest way to transfer music  
onto your phone is via Bluetooth or  
the data cable.  
You can store multimedia files in your  
phone’s memory so you have easy  
access to all your pictures, sounds,  
videos and games. You can also save  
your files to a memory card. Using a  
memory card allows you to free up  
space in your phone’s memory.  
To transfer music using Bluetooth:  
1 Make sure both devices have  
Bluetooth switched on and are  
connected to each other.  
2 Select the music file on the  
other device and select send via  
Bluetooth.  
3 When the file is sent, you will have  
to accept it on your phone by  
touching Yes.  
By touching My stuff, you can open  
a list of the folders that store all your  
multimedia files.  
Games and Applications  
You can download new games and  
applications to your phone to keep  
you enjoy.  
4 The file should appear in Music >  
All tracks.  
1ꢂ  
Converting a unit  
1 Touch Unit Converter.  
Application  
Adding an event to your  
calendar  
1 Touch Calendar.  
2 Select the date you would like to  
add an event to.  
2 Choose whether you want to  
convert Currency, Area, Length,  
Weight, Temperature, Volume or  
Velocity.  
3 Then select the unit and enter the  
value you would like to convert  
from.  
3 Touch Add.  
Setting your alarm  
1 Touch Alarms.  
The web  
Browser gives you a fast, full-color  
world of games, music, news, sport,  
entertainment and loads more,  
straight to your mobile phone.  
Wherever you are and whatever  
you’re into.  
2 Touch Add, then you can set and  
save your alarm in this menu.  
Voice Recorder  
Use your voice recorder to record  
voice memos or other audio files.  
Accessing the web  
1 Touch the Browser.  
Using your calculator  
1 Touch Calculator.  
2 To go straight to the browser home  
page, select Home. Alternately,  
select Enter Address and type in  
the URL, followed by Connect.  
2 Touch the number keys to enter  
numbers.  
1ꢃ  
Changing your phone  
settings  
Use the freedom of adapting the  
LG800G to your own preferences.  
From the home screen, select  
and touch Settings then scroll to  
Phone.  
NOTE: You will incur extra cost  
by connecting to these services  
and downloading content. Check  
data charges with your network  
provider.  
Settings  
Sending and receiving your  
files using Bluetooth  
To send a file:  
1 Open the file you want to send,  
typically this will be a photo, video  
or music file.  
Personalising your profiles  
You can personalise each profile  
setting.  
1 Touch Profiles.  
2 Choose the profile you want to  
2 Choose Send via. Choose  
Bluetooth.  
edit.  
3 You can then change all the  
sounds and alert options available  
in the list, including your Ringtone  
and Volume, Message tone  
settings and more.  
3 If you have already paired the  
Bluetooth device, your LG800G  
will not automatically search for  
other Bluetooth devices. If not,  
your LG800G will search for other  
Bluetooth enabled devices within  
range.  
4 Choose the device you want to  
send the file to.  
5 Your file will be sent.  
1ꢄ  
To receive a file:  
3 Your LG800G will search for  
devices. When the search is  
completed, Refresh will appear  
on screen.  
1 Your Bluetooth must be both ON  
and Visible. Visible mode can be  
set on for only ꢁ minutes; for your  
security. If you want to check your 4 Choose the device you want to pair  
visibility, select Options  
choose Settings.  
and  
with and enter the passcode, then  
touch OK.  
2 A message will prompt you to  
accept the file from the sender.  
Touch Yes to receive the file.  
5 Your phone will then connect to  
the other device, on which you will  
need to enter the same passcode.  
3 You will see where the file has  
been saved. For image files,  
6 Your passcode protected Bluetooth  
connection is now ready.  
you can choose to View the file.  
Files will usually be saved to the  
appropriate folder in My stuff.  
Pairing with another  
Bluetooth device  
By pairing your LG800G and another  
device, you can set up a passcode  
protected connection.  
1 Check that your Bluetooth is ON  
and Visible. You can change your  
visibility in the Settings menu.  
2 Touch Search.  
1ꢅ  
Accessories  
There are various accessories for your mobile phone. You can select these  
options according to your personal communication requirements.  
Charger  
Battery  
NOTE  
Always use genuine LG accessories.  
Failure to do this may invalidate your warranty.  
Accessories may vary in different regions.  
18  
Technical data  
Ambient Temperatures  
Max.: +ꢄ0°C (discharging) +ꢂꢃ°C (charging)  
Min.: -ꢀ0°C (discharging) 0°C (charging)  
1ꢆ  
For Your Safety  
during extreme weather conditions  
or in your car on a hot day. Exposure  
to excessive cold or heat will result  
in malfunction, damage and/or  
catastrophic failure.  
Important Information  
This user guide contains important  
information on the use and operation  
of this phone. Please read all the  
information carefully for optimal  
performance and to prevent any  
damage to or misuse of the phone.  
Any changes or modifications not  
expressly approved in this user  
guide could void your warranty for  
this equipment. Any changes or  
modifications not expressly approved  
by the manufacturer could void  
the user’s authority to operate the  
equipment.  
Be careful when using your phone  
near other electronic devices. RF  
emissions from your mobile phone  
may affect nearby in adequately  
shielded electronic equipment. You  
should consult with manufacturers of  
any personal medical devices such  
as pacemakers and hearing aides to  
determine if they are susceptible to  
interference from your mobile phone.  
Turn off your phone in a medical  
facility or at a gas station. Never  
place your phone in a microwave  
oven as this will cause the battery to  
explode.  
Before You Start  
Safety Instructions  
WARNING! To reduce the possibility  
of electric shock, do not expose your  
phone to high humidity areas, such  
as the bathroom, swimming pool, etc.  
Always store your phone away  
from heat. Never store your phone  
in settings that may expose it to  
temperatures less than ꢁꢀ°F or  
greater than 10ꢂ°F, such as outside  
IMPORTANT! Please read the TIA  
SAFETY INFORMATION on page ꢆꢂ  
before using your phone.  
Safety Information  
Read these simple guidelines.  
Breaking the rules may be dangerous  
or illegal. Further detailed information  
is given in this user guide.  
ꢀ0  
Do not disassemble this unit. Take  
it to a qualified service technician  
when repair work is required.  
Keep away from electrical  
appliances such as TVs, radios, and  
personal computers.  
The unit should be kept away from  
heat sources such as radiators or  
cookers.  
Do not expose the phone to liquid  
or moisture.  
Use the accessories like an  
earphone cautiously. Do not touch  
the antenna unnecessarily.  
Memory card information  
and care  
The memory card cannot be used  
for recording copyright- protected  
data.  
Do not drop.  
Do not subject this unit to  
mechanical vibration or shock.  
Keep the memory card out of the  
small children’s reach.  
Do not leave the memory card in  
extremely hot location.  
The coating of the phone may be  
damaged if covered with wrap or  
vinyl wrapper.  
Use dry cloth to clean the exterior  
of the unit. (Do not use solvent such  
as benzene, thinner or alcohol.)  
Do not disassemble or modify the  
memory card.  
FCC RF Exposure Information  
Do not subject this unit to excessive  
smoke or dust.  
WARNING! Read this information  
before operating the phone.  
In August 1ꢆꢆꢄ, the Federal  
Communications Commission  
(FCC) of the United States, with its  
action in Report and Order FCC  
ꢆꢄ-ꢁꢀꢄ, adopted an updated safety  
standard for human exposure to  
Do not keep the phone next to  
credit cards or transport tickets; it  
can affect the information on the  
magnetic strips.  
Do not tap the screen with a sharp  
object; otherwise, it may damage  
the phone.  
ꢀ1  
For Your Safety  
radio frequency (RF) electromagnetic between the user’s body and the  
energy emitted by FCC regulated  
transmitters. Those guidelines are  
consistent with the safety standard  
previously set by both U.S. and  
international standards bodies.  
The design of this phone complies  
with the FCC guidelines and these  
international standards.  
back of the phone. To comply with  
FCC RF exposure requirements,  
a minimum separation distance  
of 0.ꢅꢆ inches (ꢀcm) must be  
maintained between the user’s  
body and the back of the phone.  
Third-party belt-clips, holsters,  
and similar accessories containing  
metallic components should not be  
used. Body-worn accessories that  
cannot maintain 0.ꢅꢆ inches (ꢀcm)  
separation distance between the  
user’s body and the back of the  
phone, and have not been tested for  
typical body-worn operations may not  
comply with FCC RF exposure limits  
and should be avoided.  
CAUTION  
Use only the supplied and approved  
antenna. Use of unauthorized  
antennas or modifications could  
impair call quality, damage the phone,  
void your warranty and/or result  
in violation of FCC regulations. Do  
not use the phone with a damaged  
antenna. If a damaged antenna  
comes into contact with skin, a minor  
burn may result. Contact your local  
dealer for a replacement antenna.  
FCC Part 15 Class B  
Compliance  
This device and its accessories  
comply with part 1ꢃ of FCC rules.  
Operation is subject to the following  
two conditions: (1) This device and  
its accessories may not cause  
harmful interference, and (ꢀ) this  
Body-worn Operation  
This device was tested for typical  
body-worn operations with the back  
of the phone kept 0.ꢅꢆ inches (ꢀcm)  
ꢀꢀ  
device and its accessories must  
accept any interference received,  
including interference that may cause  
undesired operation.  
following measures:  
Reorient or relocate the receiving  
antenna.  
Increase the separation between  
the equipment and receiver.  
Part 15.105 statement  
This equipment has been tested  
and found to comply with the  
limits for a class B digital device,  
pursuant to Part 1ꢃ of the FCC  
Rules. These limits are designed to  
provide reasonable protection against  
harmful interference in a residential  
installation. This equipment generates  
uses and can radiate radio frequency  
energy and, if not installed and used  
in accordance with the instructions,  
may cause harmful interference to  
radio communications. However, there  
is no guarantee that interference will  
not occur in a particular installation.  
Connect the equipment into an  
outlet on a circuit different from that  
to which the receiver is connected.  
Consult the dealer or an  
experienced radio/TV technician  
for help.  
Cautions for Battery  
Do not disassemble or open crush,  
bend or deform, puncture or shred.  
Do not modify or remanufacture,  
attempt to insert foreign objects  
into the battery, immerse or expose  
to water or other liquids, expose to  
fire, explosion or other hazard.  
Only use the battery for the system  
for which it is specified.  
Only use the battery with a  
charging system that has been  
qualified with the system per this  
standard. Use of an unqualified  
If this equipment does cause harmful  
interference or television reception,  
which can be determined by turning  
the equipment off and on, the user  
is encouraged to try to correct the  
interference by one or more of the  
ꢀꢁ  
For Your Safety  
battery or charger may present a  
risk of fire, explosion, leakage, or  
other hazard.  
Do not short circuit a battery or  
allow metallic conductive objects to  
contact battery terminals.  
Replace the battery only with  
another battery that has been  
qualified with the system per this  
standard, IEEE-Std-1ꢅꢀꢃ-ꢀ00x.  
Use of an unqualified battery may  
present a risk of fire, explosion,  
leakage or other hazard.  
Promptly dispose of used  
batteries in accordance with local  
regulations.  
Improper battery use may result in  
a fire, explosion or other hazard.  
For those host devices that utilize  
a USB port as a charging source,  
the host device’s user manual shall  
include a statement that the phone  
shall only be connected to products  
that bear the USB-IF logo or have  
completed the USB-IF compliance  
program.  
Adapter (Charger) Cautions  
Using the wrong battery charger  
could damage your phone and void  
your warranty.  
The adapter or battery charger is  
intended for indoor use only.  
Battery usage by children should be  
supervised.  
Do not expose the adapter or battery  
charger to direct sunlight or use it in  
places with high humidity, such as  
the bathroom.  
Avoid dropping the phone or  
battery. If the phone or battery  
is dropped, especially on a hard  
surface, and the user suspects  
damage, take it to a service center  
for inspection.  
ꢀꢂ  
Avoid damage to your  
hearing  
Damage to your hearing can occur  
if you are exposed to loud sound for  
long periods of time. We therefore  
recommend that you do not turn  
on or off the handset close to  
your ear. We also recommend that  
music and call volumes are set to a  
reasonable level.  
If you are listening to music while  
out and about, please ensure that  
the volume is at a reasonable  
level so that you are aware of your  
surroundings. This is particularly  
imperative when attempting to  
cross the street.  
ꢀꢃ  
Safety Guidelines  
NCRP Report 8ꢄ (1ꢆ8ꢄ)  
ICNIRP (1ꢆꢆꢄ)  
Those standards were based  
on comprehensive and periodic  
evaluations of the relevant scientific  
literature. For example, over 1ꢀ0  
scientists, engineers, and physicians  
from universities, government health  
agencies, and industry reviewed the  
available body of research to develop  
the ANSI Standard (Cꢆꢃ.1).  
TIA Safety Information  
Provided herein is the complete  
TIA Safety Information for Wireless  
Handheld phones. Inclusion of  
the text covering Pacemakers,  
Hearing Aids, and Other Medical  
Devices is required in the owner’s  
manual for CTIA Certification. Use  
of the remaining TIA language is  
encouraged when appropriate.  
Exposure to Radio Frequency  
Signal  
Your wireless handheld portable  
telephone is a lowpower radio  
transmitter and receiver. When it is  
ON, it receives and also sends out  
radio frequency (RF) signals.  
* American National Standards  
Institute; National Council  
on Radiation Protection and  
Measurements; International  
Commission on Non-Ionizing  
Radiation Protection  
The design of your phone complies  
with the FCC guidelines (and those  
standards).  
In August, 1ꢆꢆꢄ, the Federal  
Communications Commissions (FCC)  
adopted RF exposure guidelines with  
safety levels for handheld wireless  
phones. Those guidelines are  
consistent with the safety standards  
previously set by both U.S. and  
international standards bodies:  
Antenna Care  
Use only the supplied or an approved  
replacement antenna. Unauthorized  
antennas, modifications, or  
attachments could damage the phone  
and may violate FCC regulations.  
ANSI Cꢆꢃ.1 (1ꢆꢆꢀ) *  
ꢀꢄ  
Pull off the road and park before  
making or answering a call if  
driving conditions so require.  
Phone Operation  
NORMAL POSITION: Hold the phone  
as you would any other telephone  
with the antenna pointed up and over  
your shoulder.  
Electronic Devices  
Most modern electronic equipment  
is shielded from RF signals. However,  
certain electronic equipment may not  
be shielded against the RF signals  
from your wireless phone.  
Tips on Efficient Operation  
For your phone to operate most  
efficiently:  
Do not touch the antenna  
unnecessarily when the phone is  
in use. Contact with the antenna  
affects call quality and may cause  
the phone to operate at a higher  
power level than otherwise needed.  
Pacemakers  
The Health Industry Manufacturers  
Association recommends that a  
minimum separation of six (ꢄ’) inches  
be maintained between a handheld  
wireless phone and a pacemaker to  
avoid potential interference with the  
pacemaker. These recommendations  
are consistent with the independent  
research by and recommendations of  
Wireless Technology Research.  
Driving  
Check the laws and regulations on  
the use of wireless phones in the  
areas where you drive. Always obey  
them. Also, if using your phone while  
driving, please:  
Persons with pacemakers:  
Give full attention to driving - driving  
safely is your first responsibility;  
Use hands-free operation, if  
available;  
Should ALWAYS keep the phone  
more than six inches from their  
pacemaker when the phone is  
turned ON;  
ꢀꢅ  
Safety Guidelines  
Should not carry the phone in a  
breast pocket.  
in these areas instruct you to do so.  
Hospitals or health care facilities may  
use equipment that could be sensitive  
to external RF energy.  
Should use the ear opposite  
the pacemaker to minimize the  
potential for interference.  
If you have any reason to suspect  
that interference is taking place,  
turn your phone OFF immediately.  
Vehicles  
RF signals may affect improperly  
installed or inadequately shielded  
electronic systems in motor vehicles.  
Check with the manufacturer or its  
representative regarding your vehicle.  
You should also consult the  
manufacturer of any equipment that  
has been added to your vehicle.  
Hearing Aids  
Some digital wireless phones may  
interfere with some hearing aids. In  
the event of such interference, you  
may want to consult AT&T.  
Posted Facilities  
Other Medical Devices  
Turn your phone OFF in any facility  
where posted notices so require.  
If you use any other personal medical  
device, consult the manufacturer of  
your device to determine if they are  
adequately shielded from external  
RF energy. Your physician may be  
able to assist you in obtaining this  
information.  
Aircraft  
FCC regulations prohibit using your  
phone while in the air. Turn your  
phone OFF before boarding an  
aircraft.  
Health Care Facilities  
Turn your phone OFF in health care  
facilities when any regulations posted  
ꢀ8  
powders); and any other area where  
you would normally be advised to turn  
off your vehicle engine.  
Blasting Areas  
To avoid interfering with blasting  
operations, turn your phone OFF  
when in a ‘blasting areas or in areas  
posted: ‘Turn off two-way radio’. Obey  
all signs and instructions.  
For Vehicles Equipped with  
an Air Bag  
An air bag inflates with great force.  
DO NOT place objects, including  
either installed or portable wireless  
equipment, in the area over the air  
bag or in the air bag deployment  
area. If in-vehicle wireless equipment  
is improperly installed and the air bag  
inflates, serious injury could result.  
Potentially Explosive  
Atmosphere  
Turn your phone OFF when in any  
area with a potentially explosive  
atmosphere and obey all signs and  
instructions. Sparks in such areas  
could cause an explosion or fire  
resulting in bodily injury or even  
death.  
Areas with a potentially explosive  
atmosphere are often, but not always,  
marked clearly. Potential areas  
may include: fueling areas (such  
as gasoline stations); below deck  
on boats; fuel or chemical transfer  
or storage facilities; vehicles using  
liquefied petroleum gas (such as  
propane or butane); areas where the  
air contains chemicals or particles  
(such as grain, dust, or metal  
Charger and Adapter Safety  
The charger and adapter are  
intended for indoor use only.  
Battery Information and Care  
Please dispose of your battery  
properly or take it to your local  
wireless carrier for recycling.  
The battery does not need to be  
fully discharged before recharging.  
Use only LG-approved chargers  
specific to your phone model since  
ꢀꢆ  
Safety Guidelines  
they are designed to maximize  
battery life.  
Do not disassemble or impact the  
battery as it may cause electric  
shock, short-circuit, and fire. Store  
the battery in a place out of reach  
of children.  
an abnormal state. In this case,  
remove the battery from the phone,  
reinstall it, and turn the phone on.  
Actual battery life will depend on  
network configuration, product  
settings, usage patterns, battery  
and environmental conditions.  
Keep the battery’s metal contacts  
clean.  
Explosion, Shock, and Fire  
Hazards  
Do not put your phone in a place  
subject to excessive dust and keep  
the minimum required distance  
between the power cord and heat  
sources.  
Unplug the power cord prior to  
cleaning your phone, and clean the  
power plug pin when it is dirty.  
When using the power plug, ensure  
that it is firmly connected. If it is  
not, it may cause excessive heat  
or fire.  
Replace the battery when it  
no longer provides acceptable  
performance. The battery can be  
recharged several hundred times  
before replacement.  
Recharge the battery after long  
periods of non-use to maximize  
battery life.  
Battery life will vary due to usage  
patterns and environmental  
conditions.  
Use of extended backlighting,  
MEdia Net Browsing, and data  
connectivity kits affect battery life  
and talk/standby times.  
If you put your phone in a pocket or  
bag without covering the receptacle  
of the phone (power plug pin),  
metallic articles (such as a coin,  
paperclip or pen) may short-circuit  
The self-protection function of  
the battery cuts the power of the  
phone when its operation is in  
ꢁ0  
the phone. Always cover the  
receptacle when not in use.  
When the phone is not used for  
a long period time, store it in a  
safe place with the power cord  
unplugged.  
Using the phone in proximity to  
receiving equipment (i.e., TV or  
radio) may cause interference to  
the phone.  
Do not short-circuit the battery.  
Metallic articles such as a coin,  
paperclip or pen in your pocket or  
bag may short-circuit the + and  
– terminals of the battery (metal  
strips on the battery) upon moving.  
Short-circuit of the terminal may  
damage the battery and cause an  
explosion.  
Do not use the phone if the  
antenna is damaged. If a damaged  
antenna contacts skin, it may cause  
a slight burn. Please contact an  
LG Authorized Service Center to  
replace the damaged antenna.  
Do not immerse your phone in  
water. If this happens, turn it  
off immediately and remove the  
battery. If the phone does not work,  
take it to an LG Authorized Service  
Center.  
General Notice  
Using a damaged battery or placing  
a battery in your mouth may cause  
serious injury.  
Do not place items containing  
magnetic components such as a  
credit card, phone card, bank book  
or subway ticket near your phone.  
The magnetism of the phone may  
damage the data stored in the  
magnetic strip.  
Talking on your phone for a long  
period of time may reduce call  
quality due to heat generated  
during use.  
Do not paint your phone.  
The data saved in your phone might  
be deleted due to careless use,  
repair of the phone, or upgrade  
of the software. Please backup  
your important phone numbers.  
(Ring tones, text messages,  
ꢁ1  
Safety Guidelines  
voice messages, pictures, and  
videos could also be deleted.)  
The manufacturer is not liable for  
damage due to the loss of data.  
When you use the phone in public  
places, set the ring tone to vibration  
so as not to disturb others.  
high levels of RF can produce health  
effects (by heating tissue), exposure  
to low level RF that does not produce  
heating effects causes no known  
adverse health effects. Many studies  
of low level RF exposures have not  
found any biological effects. Some  
studies have suggested that some  
biological effects may occur, but such  
findings have not been confirmed  
by additional research. In some  
cases, other researchers have had  
difficulty in reproducing those studies,  
or in determining the reasons for  
inconsistent results.  
Do not turn your phone on or off  
when putting it in your ear.  
FDA Consumer Update  
The U.S. Food and Drug  
Administration Center for Devices and  
Radiological Health Consumer Update  
on Mobile Phones.  
1. Do wireless phones pose a  
health hazard?  
2. What is the FDA’s role  
concerning the safety of  
wireless phones?  
The available scientific evidence does  
not show that any health problems  
are associated with using wireless  
phones. There is no proof, however,  
that wireless phones are absolutely  
safe. Wireless phones emit low levels  
of radiofrequency energy (RF) in the  
microwave range while being used.  
They also emit very low levels of RF  
when in the Home screen. Whereas  
Under the law, the FDA does not  
review the safety of radiation-  
emitting consumer products such  
as wireless phones before they can  
be sold, as it does with new drugs  
or medical devices. However, the  
agency has authority to take action  
if wireless phones are shown to emit  
radiofrequency energy (RF) at a level  
ꢁꢀ  
that is hazardous to the user. In such aspects of RF safety to ensure  
a case, the FDA could require the  
manufacturers of wireless phones to  
coordinated efforts at the federal  
level. The following agencies belong  
notify users of the health hazard and to this working group:  
to repair, replace, or recall the phones  
so that the hazard no longer exists.  
National Institute for Occupational  
Safety and Health  
Although the existing scientific data  
do not justify FDA regulatory actions,  
the FDA has urged the wireless  
phone industry to take a number of  
steps, including the following:  
Environmental Protection Agency  
Occupational Safety and Health  
Administration (Administración de la  
seguridad y salud laborales)  
Occupational Safety and Health  
Administration  
National Telecommunications and  
Information Administration  
The National Institutes of Health  
participates in some interagency  
working group activities, as well.  
Support needed research into  
possible biological effects of RF  
of the type emitted by wireless  
phones;  
Design wireless phones in a way  
that minimizes any RF exposure to  
the user that is not necessary for  
device function; and  
The FDA shares regulatory  
responsibilities for wireless phones  
with the Federal Communications  
Commission (FCC). All phones that  
are sold in the United States must  
comply with FCC safety guidelines  
that limit RF exposure. The FCC relies  
on the FDA and other health agencies  
for safety questions about wireless  
phones.  
Cooperate in providing users of  
wireless phones with the best  
possible information on possible  
effects of wireless phone use on  
human health.  
The FDA belongs to an interagency  
working group of the federal agencies  
that have responsibility for different  
ꢁꢁ  
Safety Guidelines  
The FCC also regulates the base  
stations that the wireless phone  
When the phone is located at greater  
distances from the user, the exposure  
networks rely upon. While these base to RF is drastically lower because  
stations operate at higher power than a person’s RF exposure decreases  
do the wireless phones themselves,  
the RF exposures that people get  
rapidly with increasing distance from  
the source. The so-called ‘cordless  
from these base stations are typically phones,’ which have a base unit  
thousands of times lower than those  
they can get from wireless phones.  
connected to the telephone wiring in  
a house, typically operate at far lower  
Base stations are thus not the subject power levels, and thus produce RF  
of the safety questions discussed in  
this document.  
exposures far below the FCC safety  
limits.  
3. What kinds of phones are the  
subject of this update?  
4. What are the results of the  
research done already?  
The term ‘wireless phone’ refers  
here to handheld wireless phones  
with built-in antennas, often called  
‘cell’, ‘mobile’, or ‘PCS’ phones.  
These types of wireless phones  
can expose the user to measurable  
radiofrequency energy (RF) because  
of the short distance between the  
phone and the user’s head. These  
RF exposures are limited by FCC  
The research done thus far has  
produced conflicting results, and  
many studies have suffered from  
flaws in their research methods.  
Animal experiments investigating  
the effects of radiofrequency energy  
(RF) exposures characteristic of  
wireless phones have yielded  
conflicting results that often cannot  
be repeated in other laboratories. A  
safety guidelines that were developed few animal studies, however, have  
with the advice of the FDA and other suggested that low levels of RF could  
federal health and safety agencies.  
accelerate the development of cancer  
ꢁꢂ  
in laboratory animals. However,  
many of the studies that showed  
increased tumor development used  
animals that had been genetically  
engineered or treated with cancer  
causing chemicals so as to be  
of the studies can answer questions  
about long-term exposures, since the  
average period of phone use in these  
studies was around three years.  
5. What research is needed to  
decide whether RF exposure  
from wireless phones poses a  
health risk?  
Acombination of laboratory studies  
and epidemiological studies of people  
actually using wireless phones would  
provide some of the data that are  
needed. Lifetime animal exposure  
studies could be completed in a few  
years. However, very large numbers  
of animals would be needed to  
provide reliable proof of a cancer  
promoting effect if one exists.  
Epidemiological studies can provide  
data that is directly applicable to  
human populations, but 10 or more  
years follow-up may be needed  
to provide answers about some  
health effects, such as cancer. This  
is because the interval between  
the time of exposure to a cancer-  
causing agent and the time tumors  
pre-disposed to develop cancer  
in the absence of RF exposure.  
Other studies exposed the animals  
to RF for up to ꢀꢀ hours per day.  
These conditions are not similar to  
the conditions under which people  
use wireless phones, so we don’t  
know with certainty what the results  
of such studies mean for human  
health. Three large epidemiology  
studies have been published since  
December ꢀ000. Between them, the  
studies investigated any possible  
association between the use of  
wireless phones and primary brain  
cancer, glioma, meningioma, or  
acoustic neuroma, tumors of the  
brain or salivary gland, leukemia, or  
other cancers. None of the studies  
demonstrated the existence of any  
harmful health effects from wireless  
phone RF exposures. However, none  
ꢁꢃ  
Safety Guidelines  
develop - if they do- may be many,  
many years. The interpretation of  
epidemiological studies is hampered  
a detailed agenda of research needs  
that has driven the establishment of  
new research programs around the  
by difficulties in measuring actual RF world. The project has also helped  
exposure during day-to-day use of develop a series of public information  
wireless phones. Many factors affect documents on EMF issues. The FDA  
this measurement, such as the angle and the Cellular Telecommunications  
at which the phone is held, or which  
model of phone is used.  
6. What is the FDA doing to find  
out more about the possible  
health effects of wireless phone  
RF?  
The FDA is working with the U.S.  
National Toxicology Program and  
with groups of investigators around  
the world to ensure that high priority  
animal studies are conducted  
to address important questions  
about the effects of exposure to  
radiofrequency energy (RF). The  
FDA has been a leading participant  
in the World Health Organization  
International Electromagnetic Fields  
(EMF) Project since its inception in  
1ꢆꢆꢄ. An influential result of this  
work has been the development of  
& Internet Association (CTIA) have  
a formal Cooperative Research  
and Development Agreement  
(CRADA) to do research on wireless  
phone safety. The FDA provides  
the scientific oversight, obtaining  
input from experts in government,  
industry, and academic organizations.  
CTIA-funded research is conducted  
through contracts with independent  
investigators. The initial research  
will include both laboratory studies  
and studies of wireless phone users.  
The CRADA will also include a broad  
assessment of additional research  
needs in the context of the latest  
research developments around the  
world.  
ꢁꢄ  
7. How can I find out how  
much radio frequency energy  
of wireless phones must report the  
RF exposure level for each model of  
exposure I can get by using my phone to the FCC. The FCC website  
wireless phone?  
All phones sold in the United  
(http://www.fcc.gov/oet/rfsafety)  
gives directions for locating the FCC  
identification number on your phone  
so you can find your phone’s RF  
exposure level in the online listing.  
8. What has the FDA done to  
measure the radio frequency  
energy coming from wireless  
phones?  
States must comply with Federal  
Communications Commission (FCC)  
guidelines that limit radio frequency  
energy (RF) exposures. The FCC  
established these guidelines in  
consultation with the FDA and the  
other federal health and safety  
agencies. The FCC limit for RF  
exposure from wireless telephones  
is set at a Specific Absorption Rate  
(SAR) of 1.ꢄ watts per kilogram (1.ꢄ  
W/kg). The FCC limit is consistent  
with the safety standards developed  
by the Institute of Electrical and  
Electronic Engineering (IEEE) and  
the National Council on Radiation  
Protection and Measurement.  
The Institute of Electrical and  
Electronic Engineers (IEEE) is  
developing a technical standard  
for measuring the radio frequency  
energy (RF) exposure from wireless  
phones and other wireless handsets  
with the participation and leadership  
of FDA scientists and engineers.  
The standard, ‘Recommended  
Practice for Determining the Spatial-  
Peak Specific Absorption Rate  
The exposure limit takes into  
consideration the body’s ability to  
remove heat from the tissues that  
absorb energy from the wireless  
phone and is set well below levels  
known to have effects. Manufacturers  
(SAR) in the Human Body Due to  
Wireless Communications Devices:  
Experimental Techniques,’ sets forth  
the first consistent test methodology  
ꢁꢅ  
Safety Guidelines  
for measuring the rate at which RF  
is deposited in the heads of wireless  
phone users. The test method uses  
a tissuesimulating model of the  
human head. Standardized SAR  
test methodology is expected to  
greatly improve the consistency of  
measurements made at different  
(RF). Since time is a key factor in how  
much exposure a person receives,  
reducing the amount of time spent  
using a wireless phone will reduce  
RF exposure. If you must conduct  
extended conversations by wireless  
phone every day, you could place  
more distance between your body  
laboratories on the same phone. SAR and the source of the RF, since the  
is the measurement of the amount  
of energy absorbed in tissue, either  
by the whole body or a small part of  
the body. It is measured in watts/kg  
(or milliwatts/g) of matter. This  
measurement is used to determine  
whether a wireless phone complies  
with safety guidelines.  
9. What steps can I take to reduce  
my exposure to radiofrequency  
energy from my wireless  
phone?  
If there is a risk from these products -  
and at this point we do not know that  
there is - it is probably very small. But  
if you are concerned about avoiding  
even potential risks, you can take a  
few simple steps to minimize your  
exposure to radiofrequency energy  
exposure level drops off dramatically  
with distance. For example, you could  
use a headset and carry the wireless  
phone away from your body or use  
a wireless phone connected to a  
remote antenna. Again, the scientific  
data do not demonstrate that wireless  
phones are harmful. But if you are  
concerned about the RF exposure  
from these products, you can use  
measures like those described above  
to reduce your RF exposure from  
wireless phone use.  
10. What about children using  
wireless phones?  
The scientific evidence does not show  
a danger to users of wireless phones,  
including children and teenagers.  
If you want to take steps to lower  
ꢁ8  
exposure to radiofrequency energy  
(RF), the measures described above  
reason, the FDA helped develop a  
detailed test method to measure  
would apply to children and teenagers electromagnetic interference (EMI)  
using wireless phones. Reducing  
the time of wireless phone use and  
increasing the distance between the  
user and the RF source will reduce  
of implanted cardiac pacemakers  
and defibrillators from wireless  
telephones. This test method is now  
part of a standard sponsored by the  
RF exposure. Some groups sponsored Association for the Advancement of  
by other national governments have Medical instrumentation (AAMI). The  
advised that children be discouraged final draft, a joint effort by the FDA,  
from using wireless phones at all.  
For example, the government in the  
United Kingdom distributed leaflets  
medical device manufacturers, and  
many other groups, was completed  
in late ꢀ000. This standard will  
containing such a recommendation in allow manufacturers to ensure that  
December ꢀ000. They noted that no  
evidence exists that using a wireless  
phone causes brain tumors or other  
ill effects. Their recommendation to  
limit wireless phone use by children  
was strictly precautionary; it was not  
cardiac pacemakers and defibrillators  
are safe from wireless phone EMI.  
The FDA has tested hearing aids  
for interference from handheld  
wireless phones and helped develop  
a voluntary standard sponsored  
based on scientific evidence that any by the Institute of Electrical and  
health hazard exists.  
Electronic Engineers (IEEE). This  
standard specifies test methods and  
performance requirements for hearing  
aids and wireless phones so that no  
interference occurs when a person  
uses a ‘compatible’ phone and a  
‘compatible’ hearing aid at the same  
11. What about wireless phone  
interference with medical  
equipment?  
Radio frequency energy (RF) from  
wireless phones can interact with  
some electronic devices. For this  
ꢁꢆ  
Safety Guidelines  
time. This standard was approved by World Health Organization (WHO)  
the IEEE in ꢀ000. The FDA continues International EMF Project  
to monitor the use of wireless phones  
for possible interactions with other  
medical devices. Should harmful  
interference be found to occur, the  
FDA will conduct testing to assess  
the interference and work to resolve  
the problem.  
12. Where can I find additional  
information?  
For additional information, please  
refer to the following resources:  
(http://www.who.int/peh-emf/)  
National Radiological Protection Board  
(UK)  
(http://www.nrpb.org.uk)  
10 Driver Safety Tips  
Your wireless phone gives you the  
powerful ability to communicate by  
voice almost anywhere, anytime. An  
important responsibility accompanies  
the benefits of wireless phones, one  
that every user must uphold.  
FDA web page on wireless phones  
EmittingProducts/  
When operating a car, driving is your  
first responsibility.  
RionEmittingProductsandProcedures/  
HomeBusinessandEntertainment/  
CellPhones/default.htm)  
Federal Communications Commission  
(FCC) RF Safety Program  
When using your wireless phone  
behind the wheel of a car, practice  
good common sense and remember  
the following tips:  
1. Get to know your wireless phone  
and its features such as speed  
dial and redial. Carefully read  
your instruction manual and learn  
to take advantage of valuable  
features most phones offer,  
(http://www.fcc.gov/oet/rfsafety)  
International Commission on Non-  
lonizing Radiation Protection (http://  
www.icnirp.de)  
including automatic redial and  
ꢂ0  
memory. Also, work to memorize  
the phone keypad so you can use  
the speed dial function without  
taking your attention off the road.  
2. When available, use a hands-free  
device. A number of hands-free  
wireless phone accessories are  
readily available today. Whether  
you choose an installed mounted  
device for your wireless phone  
or a speaker phone accessory,  
take advantage of these devices if  
available to you.  
3. Position your wireless phone within  
easy reach. Make sure you place  
your wireless phone within easy  
reach and where you can reach it  
without removing your eyes from  
the road. If you get an incoming  
call at an inconvenient time, if  
possible, let your voicemail answer  
it for you.  
call in heavy traffic or hazardous  
weather conditions. Rain, sleet,  
snow and ice can be hazardous,  
but so is heavy traffic. As a driver,  
your first responsibility is to pay  
attention to the road.  
5. Do not take notes or look up phone  
numbers while driving. If you  
are reading an Address Book or  
business card, or writing a “to-do”  
list while driving a car, you are not  
watching where you are going. It is  
common sense. Don’t get caught  
in a dangerous situation because  
you are reading or writing and not  
paying attention to the road or  
nearby vehicles.  
6. Dial sensibly and assess the traffic;  
if possible, place calls when you  
are not moving or before pulling  
into traffic. Try to plan your calls  
before you begin your trip or  
attempt to coincide your calls with  
times you may be stopped at a  
stop sign, red light or otherwise  
stationary. But if you need to dial  
while driving, follow this simple  
4. Suspend conversations during  
hazardous driving conditions or  
situations. Let the person you  
are speaking with know you are  
driving; if necessary, suspend the  
ꢂ1  
Safety Guidelines  
tip— dial only a few numbers,  
check the road and your mirrors,  
then continue.  
7. Do not engage in stressful or  
emotional conversations that  
may be distracting. Stressful or  
emotional conversations and  
driving do not mix; they are  
distracting and even dangerous  
when you are behind the wheel of  
a car. Make people you are talking  
with aware you are driving and if  
necessary, suspend conversations  
which have the potential to divert  
your attention from the road.  
8. Use your wireless phone to call for  
help. Your wireless phone is one of  
the greatest tools you can own to  
protect yourself and your family in  
dangerous situations — with your  
phone at your side, help is only  
three numbers away. Dial ꢆ11 or  
other local emergency number in  
the case of fire, traffic accident,  
road hazard or medical emergency.  
Remember, it is a free call on your  
wireless phone!  
9. Use your wireless phone to help  
others in emergencies. Your  
wireless phone provides you a  
perfect opportunity to be a “Good  
Samaritan” in your community. If  
you see an auto accident, crime  
in progress or other serious  
emergency where lives are in  
danger, call ꢆ11 or other local  
emergency number, as you would  
want others to do for you.  
10. Call roadside assistance or a  
special wireless non-emergency  
assistance number when  
necessary. Certain situations  
you encounter while driving  
may require attention, but are  
not urgent enough to merit a  
call for emergency services. But  
you can still use your wireless  
phone to lend a hand. If you see  
a broken-down vehicle posing no  
serious hazard, a broken traffic  
signal, a minor traffic accident  
where no one appears injured or  
a vehicle. You know to be stolen,  
call roadside assistance or other  
special non-emergency wireless  
number.  
ꢂꢀ  
For more information, please call to  
888-ꢆ01-SAFE, or visit our website  
of all persons, regardless of age and  
health.  
The exposure standard for wireless  
mobile phones employs a unit of  
measurement known as the Specific  
Absorption Rate, or SAR. The SAR  
limit set by the FCC is 1.ꢄW/kg.  
Consumer Information on  
SAR (Specific Absorption  
Rate)  
This Model Phone Meets the  
Government’s Requirements for  
Exposure to Radio Waves.  
* Tests for SAR are conducted  
using standard operating positions  
specified by the FCC with the phone  
transmitting at its highest certified  
power level in all tested frequency  
bands. Although SAR is determined  
at the highest certified power level,  
the actual SAR level of the phone  
while operating can be well below  
the maximum value. Because the  
phone is designed to operate at  
multiple power levels to use only the  
power required to reach the network,  
in general, the closer you are to a  
wireless base station antenna, the  
lower the power output.  
Your wireless phone is a radio  
transmitter and receiver. It is designed  
and manufactured not to exceed the  
emission limits for exposure to radio  
frequency (RF) energy set by the  
Federal Communications Commission  
(FCC) of the U.S. Government. These  
limits are part of comprehensive  
guidelines and establish permitted  
levels of RF energy for the general  
population. The guidelines are based  
on standards that were developed by  
independent scientific organizations  
through periodic and thorough  
Before a phone model is available for  
sale to the public, it must be tested  
and certified to the FCC that it does  
not exceed the limit established by  
evaluation of scientific studies. The  
standards include a substantial safety  
margin designed to assure the safety  
ꢂꢁ  
Safety Guidelines  
the government-adopted requirement FCC ID BEJLG800G.  
for safe exposure. The tests are  
performed in positions and locations  
(e.g., at the ear and worn on the  
body) as required by the FCC for  
each model. The highest SAR value  
for LG Arena phone when tested  
for use at the ear is 0,00 W/kg and  
when worn on the body, as described  
in this user’s manual, is 0,00 W/kg.  
(Body-worn measurements differ  
among phones models, depending  
upon available accessories and  
FCC requirements.) While there  
may be differences between SAR  
levels of various phones and at  
various positions, they all meet the  
government requirement for safe  
exposure.  
The FCC has granted an Equipment  
Authorization for this model phone  
with all reported SAR levels evaluated  
as in compliance with the FCC RF  
emission guidelines. SAR information  
on this model phone is on file with  
the FCC and can be found under the  
fcc.gov/oet/fccid after searching on  
Additional information on Specific  
Absorption Rates (SAR) can be found  
on the Cellular Telecommunications  
Industry Association (CTIA) website at  
* In the United States and Canada,  
the SAR limit for mobile phones  
used by the public is 1.ꢄ watts/kg  
(W/kg) averaged over one gram of  
tissue. The standard incorporates a  
substantial margin of safety to give  
additional protection for the public  
and to account for any variations in  
measurements.  
Hearing Aid Compatibility  
(HAC) with Mobile Phones  
When some mobile phones are used  
near some hearing devices (hearing  
aids and cochlear implants),users  
may detect a buzzing, humming, or  
whining noise. Some hearing devices  
are more immune than others to this  
interference noise, and phones also  
vary in the amount of interference  
they generate. The wireless telephone  
ꢂꢂ  
industry has developed ratings for  
some of their mobile phones, to  
hearing device’s telecoil (“T Switch”  
or “Telephone Switch”) than unrated  
assist hearing device users in finding phones. Tꢂ is the better/higher of the  
phones that may be compatible  
with their hearing devices. Not all  
phones have been rated. Phones  
that are rated have the rating on  
their box or a label on the box. The  
ratings are not guarantees. Results  
will vary depending on the user’s  
hearing device and hearing loss. If  
your hearing device happens to be  
vulnerable to interference, you may  
not be able to use a rated phone  
successfully. Trying out the phone  
with your hearing device is the best  
way to evaluate it for your personal  
needs.  
M-Ratings: Phones rated Mꢁ or  
Mꢂ meet FCC requirements and are  
likely to generate less interference to  
hearing devices than phones that are  
not labeled. Mꢂ is the better/higher of  
the two ratings.  
two ratings. (Note that not all hearing  
devices have telecoils in them.)  
Hearing devices may also be  
measured for immunity to this type  
of interference. Your hearing device  
manufacturer or hearing health  
professional may help you find  
results for your hearing device. The  
more immune your hearing aid is,  
the less likely you are to experience  
interference noise from mobile  
phones.  
To ensure that the Hearing Aid  
Compatibility rating for your phone is  
maintained, secondary transmitters  
such as Bluetooth® and WLAN  
components must be disabled during  
a call.  
T-Ratings: Phones rated Tꢁ or Tꢂ  
meet FCC requirements and are  
likely to be more usable with a  
ꢂꢃ  

Motorola Nextel i365 User Manual
Marantz CC4000 User Manual
Kenwood KDC M9021 User Manual
JVC LST0580 001A User Manual
ioSafe 910 11011 00 User Manual
International Design USB Parallel FIFO Module DLP USB245R User Manual
IBM 37L1388 User Manual
EVGA UV Plus+ UV 12 User Manual
Casio DQR 300U User Manual
Bloomfield ELECTRONIC BREW CONTROL 1093 User Manual