s o f t w a r e o f t h e p h o n e o r y o u r s e r v i c e p r o v i d e r .
S o m e o f c o n t e n t s i n t h i s m a n u a l m a y d i f f e r f r o m y o u r p h o n e d e p e n d i n g o n t h e
G4010
User Guide
G 4 0 G 1 u 0 i d e d e l ’ u t i l i s a t e u r
Some of contents in this manual may differ from your phone depending on the
software of the phone or your service provider.
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS
LG offers you a limited warranty that the enclosed subscriber unit and its
enclosed accessories will be free from defects in material and
workmanship, according to the following terms and conditions:
1. The limited warranty for the product extends for ONE (1) year
beginning on the date of purchase of the product.
2. The limited warranty extends only to the original purchaser of the
product and is not assignable or transferable to any subsequent
purchaser/end user.
3. This warranty is good only to the original purchaser of the product
during the warranty period, but limited to certain countries if specified.
4. The external housing and cosmetic parts shall be free of defects at
the time of shipment and, therefore, shall not be covered under these
limited warranty terms.
5. Upon request from LG, the consumer must provide acceptable
information to prove the date of purchase.
6. The customer shall bear the cost of shipping the product to the
Customer Service Department of LG. LG shall bear the cost of
shipping the product back to the consumer after the completion of
service under this limited warranty.
2. WHAT THIS WARRANTY DOES NOT COVER
1. Defects or damages resulting from use of the product in other than its
normal and customary manner.
2. Defects or damages from abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair,
misuse, neglect, abuse, accident, alteration, improper installation, or
other acts which are not the fault of LG, including damage caused by
shipping, blown fuses, and spills of food or liquid.
3. Breakage or damage to antennas unless caused directly by defects
in material or workmanship.
4. The Customer Service Department at LG must be notified by
consumer of the alleged defect or malfunction of the product during
the applicable limited warranty period for the warranty to apply.
5. Products which have had the serial number removed or made
illegible.
6. This limited warranty is in lieu of all other warranties, express or
implied either in fact or by operations of law, statutory or otherwise,
including, but not limited to any implied warranty of marketability or
fitness for a particular use.
7. Damage resulting from use of any non-LG approved accessory. Use
of any non-LG approved accessory immediately voids this warranty
and LG shall not be responsible for any incidental, consequential,
special, or any other damage resulting from the use of any non-LG
approved accessory.
8. All plastic surfaces and all other externally exposed parts that are
scratched or damaged due to normal customer use.
9. Products operated outside published maximum ratings.
10. Products used or obtained in a rental program.
11. Consumables (such as fuses).
3. STATE LAW RIGHTS:
No other express warranty is applicable to this product. THE DURATION
OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF
THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT
BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT,
INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR
CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS PRODUCT.
Some countries do not allow the exclusive of limitation of incidental or
consequential damages or limitations on how long an implied warranty
lasts; so these limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may also have other
rights, which vary from state to state.
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call the following telephone number
from anywhere in the continental United States:
Tel. 1-800-793-8896 Fax. 1-800-448-4026
G4010
User Guide
Table of Contents
Unpacking
For Your Safety
Your Phone
Phone Components
Your Phone's Features
Display Information
8
9
Making a Call
Making a Call by Send Key
24
24
24
24
Adding Calls to the
Conference Call
Displaying Callers in a
Conference Call
Private Call in a
Conference Call
Templates
33 Name Card
45
46
46
14 Making International Calls
14 Ending a Call
15 Making a Call
Check Memory
33
Call Register
47
47
47
48
48
48
48
48
48
48
17
From the Phonebook
Adjusting the Volume
25
25
25
26
26
26
33 Missed Calls
34 Received Calls
Dialed Calls
35 Delete Recent Calls
Call Durations
Ending a Conference Call
Getting Started
18 Answering a Call
Manner Mode (Quick)
18 Signal Strength
Entering Text
Using the Battery,
Charger and SIM Card
Installing and
Removing the Battery
Installing the Battery
Removing the Battery
Charging the Battery
Disconnecting the Charger
Installing the SIM Card
Menu Tree
Selecting
Functions and Options 38 Last Call
Messages
Text Messages
Write Message
Inbox
Outbox
Draft
Settings
Delete All
18
39 Received Calls
18 Phonebook
19 In-Call Menu
19 During a Call
20 Making a Second Call
21 Swapping
30
31
31
31
39 Dialed Calls
39 All Calls
40
41 Call Costs
41 Last Call’s Cost
42 All Calls’ Cost
42
49
49
49
Between Two Calls
Answering an Incoming Call 31
31
Turning Your
Phone On and Off
Turning Your Phone On
Turning Your Phone Off
22 Rejecting an Incoming Call
22 Muting the Microphone
22 Switching DTMF
Tones on During a Call
22
32
32
Cost Settings
43 Call Cost’s Limit
43 Set Tariff
43 Auto Display
50
50
50
50
Voice Messages
Listen to Voice Messages
Voice Mailbox Number
32
Access Codes
Security code
22 Multiparty or
Conference Calls
23 Making a Second Call
Setting Up a
Info Service
Receive
Inbox
Topics
Alert
44 Profiles
51
52
52
53
53
53
32
33
44 Settings
44 Alarm Clock
44 Date & Time Settings
44 Date & Time
44 Auto Update
45
Barring Password
General Functions
Making and
Answering Calls
4
24
Conference Call
Activate the
33
33
Auto Display
Languages
24
Conference Call on Hold
5
Phone Settings
Display Settings
Power on Sound
Languages
54 Phonebook
54 Search
54 Add New
55 Speed Dials
55 Caller Groups
Copy All
55 Delete All
55 Settings
56 Information
56
65
65
66
66
67
67
68
68
69
WAP Information
77
Q & A
78
81
83
97
99
Accessories
Safety Guidelines
Glossary
LED indicator
Call Settings
Call Forwarding
Answer Mode
Send My Number
Call Waiting
Index
56 Fun & Tools
57 Game
57
70
70
Minute Minder
Auto Redial
Select Line
Closed User Group
57 My Folder
57 Picture
Animation
58 Sound
58
58 Unit Converter
59 Calculator
59 World Time
71
71
71
71
Security Settings
PIN Code Request
Call Barring Service
Fixed Dial Number (FDN)
Change Codes
72
72
73
Network Settings
Automatic
Manual
60 Internet
60 GoRogers
60 Push Messages
60 Inbox
74
76
76
76
76
Preferred
Receive
Reset Settings
Organizer
Schedule
Memo
61
62 Cache Settings
62 Clear Cache
64 Cache Check
77
77
77
6
7
Unpacking
For Your Safety
Check to make sure that you have all the parts shown below.
Important Information
This user guide contains important information on the use and
operation of this phone. Please read all the information carefully for
optimal performance and to prevent any damage to, or misuse of,
the phone. Any changes or modifications not expressly approved in
this user guide could void your warranty for this equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not
expose your phone to high humidity areas, such as the bathroom,
swimming pool, etc.
Always store your phone away from heat. Never store
your phone in settings that may expose it to temperatures less than
32°F or greater than 104°F, such as outside during a snowstorm or
in your car on a hot day. Exposure to excessive cold or heat will
result in malfunction, damage and/or catastrophic failure.
Handset
Standard
Battery
Be careful when using your phone near other
electronic devices. RF emissions from your mobile phone may
affect nearby inadequately shielded electronic equipment. You
should consult with manufacturers of any personal medical devices
such as pacemakers and hearing aides to determine if they are
susceptible to interference from your mobile phone. Turn off your
phone in a medical facility or at a gas station.
Never place your phone in a microwave oven as this will cause the
battery to explode.
IMPORTANT! Please read the SAFETY GUIDELINES on page 83
before using your phone.
Travel Adapter
User Guide
8
9
For Your Safety
For Your Safety
]
]
Do not hold or let the antenna come in contact with your body
during a call.
Safety Information
Please read and observe the following information for the safe and
proper use of your phone and to prevent any unanticipated
damage. Also, keep the user’s manual in an accessible place at all
times after reading it.
Talking on your phone for a long period of time may reduce the
call quality due to heat generated during the use of the phone.
]
]
Do not allow excessive vibration or impact to the phone.
]
Unplug the power cord and charger during a lightning storm to
When you do not plan to use the phone for a long period of time,
store it in a safe area with the power cord unplugged.
avoid electric shock or fire.
]
Do not use your phone in high explosive areas as the phone may
FCC RF Exposure Information
generate sparks.
WARNING! Read this information before operating the phone.
]
Do not put your phone in a place subject to excessive dust, and
keep the minimum required distance between the power cord
and heat sources.
In August 1996, the Federal Communications (FCC) of the United
States, with its action in Report and Order FCC 96-326, adopted an
updated safety standard for human exposure to radio frequency
(RF) electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards
bodies.
]
Do not damage the power cord by bending, twisting, pulling, or
subjecting it to heat. Do not use the plug if it is loose as it may
cause fire or electric shock.
]
Hold the power cord plug firmly to plug and unplug the power
cord. Ensure the plug is firmly connected. If it is not firmly
connected, it may cause excessive heat or fire.
The design of this phone complies with the FCC guidelines and
these international standards.
]
Do not place a heavy item on the power cord. Do not allow the
power cord to be crimped as it may cause fire or electric shock.
]
Be careful not to let the battery contact metal conductors such
as a necklace or coins. When shorted, it may cause an
explosion.
]
Do not disassemble or impact the battery as it may cause
electric shock, short-circuit, and fire. Store the battery in a place
out of reach of children.
]
Using a damaged battery or placing a battery in your mouth may
cause serious injury.
]
Do not place items containing magnetic components such as a
credit card, phone card, bank book or a subway ticket, near
your phone. The magnetic strip can be damaged by the phone.
10
11
For Your Safety
For Your Safety
and its accessories may not cause harmful interference, and (2)
CAUTION
this device and its accessories must accept any interference
received, including interference that may cause undesired
operation.
Use only the supplied and approved antenna. Use of unauthorized
antennas or modifications could impair call quality, damage the
phone, void your warranty and/or result in violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with skin, a minor burn may result.
Contact your local dealer for a replacement antenna.
Cautions for Battery
]
Do not disassemble.
]
Do not short-circuit.
]
Do not expose to high temperature: 60°C (140°F).
Body-worn Operation
]
Do not incinerate.
This device was tested for typical body-worn operations with the
back of the phone kept 10mm between the use’s body and the
back of the phone. To comply with FCC RF exposure requirements,
a minimum separation distance of 10mm must be maintained
between the user’s body and the back of the phone. Third-party
belt-clips, holsters, and similar accessories containing metallic
components should not be used. Body-worn accessories that
cannot maintain 3/4 inch (2 cm) separation distance between the
user’s body and the back of the phone, and have not been tested
for typical body-worn operations may not comply with FCC RF
exposure limits and should be avoided.
Battery Disposal
]
Please dispose of your battery properly or bring to your local
wireless carrier for recycling.
]
Do not dispose in fire or with hazardous or flammable materials.
Adapter (Charger) Cautions
]
Using the wrong battery charger could damage your phone and
void your warranty.
]
The adapter or battery charger is intended for indoor use only.
Vehicle Mounted External Antenna (optional,
if available)
Do not expose the adapter or battery charger to direct sunlight or
use it in places with high humidity, such as the bathroom.
A minimum separation distance of 8 inches (20 cm) must be
maintained between the user/bystander and the vehicle mounted
external antenna to satisfy FCC RF exposure requirements.
For more information about RF exposure, visit the FCC website at
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC rules.
Operation is subject to the following two conditions: (1) This device
12
13
Your Phone
Your Phone
Your Phone’s Features
Phone Components
1. Earpiece
2,12. Left soft key / Right soft key: Each of these keys
perform the functions indicated by the text on the display
immediately above them.
1. Earpiece
3. Side keys: These keys are used to control the volume of key
tone in standby mode and speaker volume during a call.
8. Active flip
4. Vibration key: Use to set the Manner Mode by pressing and
holding the left navigation key for about 3 seconds while in
standby mode.
5. Send key: You can dial a phone number and answer incoming
calls. Press this key in standby mode to quickly access the most
recent incoming, outgoing and missed calls.
9. Display screen
10. Navigation key
6. Alphanumeric keys: These keys are used to dial a number in
2. Left soft key
standby mode and to enter number or characters in edit mode.
11. Confirmation
key
7. Microphone: Can be muted during a call for privacy.
8. Active flip: Open the flip to answer an incoming call and close
to end the call.
12. Right soft key
9. Display screen: Displays phone status icons, menu items,
Web information, pictures and more in full color.
13. Message key
3. Side keys
10. Navigation key: Use for quick access to phone functions.
14. End / Power key
11. Confirmation key: Long press will launch the WAP browser.
4. Vibration key
Allows you to select and confirm menu options.
5. Send key
13. Message key: Use to retrieve or send voice and text
messages.
6. Alpha numeric
keys
14. End / Power key: Allows you to power the phone on or off,
end calls, or return to Standby Mode.
7. Microphone
14
15
Your Phone
Your Phone
Handstrap Hole
Display Information
Antenna
The table below describes various display indicators or icons that
appear on the phone’s display screen.
Battery Lock
On-Screen Icons
Icon
Description
Indicates the strength of the network signal.
Indicates a call is in progress.
SIM Card
Socket
Indicates that you are roaming off the network.
Indicates that GPRS service is available.
Indicates the alarm has been set and is on.
Indicates the status of the battery charge.
Indicates the receipt of a text message.
Indicates the receipt of a voice message.
Indicates that the vibration ringer has been set.
Indicates the receipt of an e-mail message.
Indicates the Loud menu in Profiles.
Battery
Terminals
Battery
Cable Connector/
Battery Charging Connector
Indicates the Quiet menu in Profiles.
Indicates the Headset menu in Profiles.
Indicates the Car menu in Profiles.
Indicates the General menu in Profiles.
Indicates that you can use the push message service.
Indicates the Schedule function.
16
17
Getting Started
Getting Started
Removing the Battery
Using the Battery, Charger and SIM
Card
Turn the power off. (If power is left on, there is a chance you could
lose the stored telephone numbers and messages.)
Installing and Removing the Battery
Pressing the release latch upwards will detach the battery from the
phone.
]
To install, insert the battery into the opening on the back of the
phone and gently press down until the latch snaps into place.
]
To remove, first make sure the power is off. Press the battery
release latch up and remove the battery from the phone at a 45-
degree angle.
Installing the Battery
To install the battery, insert the bottom of the battery into the
opening on the back of the phone. Then push the battery down
until the latch clicks.
Charging the Battery
Use of unauthorized accessories could damage your phone and
invalidate your warranty.
To use the travel adapter provided with your phone:
1. With the battery in position on the phone, connect the lead from
the travel adapter to the bottom of the phone. Check that the
arrow on the lead connector is facing towards the front of the
phone.
2. Connect the adapter to a standard AC wall outlet. Only use the
travel adapter that comes included with the package.
Warning Do not force the connector as this may damage the
phone and/or the travel adapter.
18
19
Getting Started
Getting Started
Disconnecting the Charger
Installing the SIM Card
When charging is finished, disconnect the adapter from the power
outlet and from the phone by pressing on the gray tabs on both
sides of the connector while pulling the connector out.
When you subscribe to a cellular network, you are provided with a
plug-in SIM card loaded with your subscription details (PIN,
optional services available and so on).
Locate the SIM card socket in the back of the phone. Follow the
steps below to install the SIM card.
1. Remove the battery if attached.
2. Slide the SIM card into the SIM card holder so that the holder
locks the card in position.
SIM
Notice
]
The battery delivered with your phone has to be fully charged
before using it.
]
Do not remove the battery or the SIM card while charging.
Notice When you need to remove the SIM card, slide it towards the
]
If your phone is powered on while charging, you’ll see the bars in
the battery indicator icon cycle.
top of the phone and take it out of the holder.
When the battery is fully charged, the bars in the battery indicator
icon will flash on and off
]
If your phone is powered off, the display will show the charging
SIM
status. ‘Charging’ or ‘Full’ will be displayed.
Charging
Full
Notice
]
Before installing always make sure that the phone is switched off
and remove the battery.
If the battery fails to charge completely:
]
The metal contact of the SIM card can be easily damaged by
]
After turning the phone on and off, please attempt to recharge the
scratches. Pay special attention to the SIM card while handling and
installing. Follow the instructions supplied with the SIM card.
battery.
]
After detaching and reattaching the battery, please attempt to
recharge the battery.
20
21
Getting Started
Getting Started
Turning Your Phone On and Off
Barring Password
The barring password is required when you use the Call Barring
function. The password is obtained from the service provider when
you subscribe to this function. See page 58 for further details.
Turning Your Phone On
1. Install a charged battery pack or connect the phone to an
external power source such as the vehicle power adapter or car
kit.
2. Press
for more than five seconds.
3. Depending on the status of the PIN code Request setting you
may or may not need to enter it.
Notice Like any other radio device, avoid any unnecessary contact
with the antenna while your phone is on.
Turning Your Phone Off
1. Press
for a few seconds.
Access Codes
You can use the access codes described in this section to avoid
unauthorized use of your phone. The access codes can be
changed by using the Change Codes feature [Menu 4.5.4].
Security code (4 to 8 digits)
The security code protects the unauthorized use of your phone.
The default security code is set to ‘0000’ and the security code is
required to delete all phone entries and to activate the Restore
Factory Settings menu. The security code default setting can be
modified from the Security Settings menu.
22
23
General Functions
General Functions
Making a Call From the Phonebook
Making and Answering Calls
You can store names and phone numbers dialed frequently in the
SIM card as well as the phone memory known as the Phonebook.
Making a Call
1. Make sure your phone is powered on.
You can dial a number by simply looking up a name in the
phonebook. For more details on the Phonebook feature, please
refer to page 65.
2. Enter a phone number including the area code. To edit a
number on the display screen, press the right/left navigation
keys to move the cursor to desired position or simply press the
right/left navigation keys to erase one digit at a time.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the
side keys of the phone.
In idle mode with the flip cover open, you can adjust the key
volume using the side keys.
]
Press and hold the right soft key[Clear] to erase the entire
number.
3. Press
to call the number.
4. When finished, press
.
Answering a Call
Making a Call by Send Key
When you receive a call, the phone rings and the flashing phone
icon appears on the screen. If the caller can be identified, the
caller’s phone number(or name if stored in your phonebook) is
displayed.
1. Press
, and the most recent incoming, outgoing and missed
phone numbers will be displayed.
2. Select the desired number by using the navigation key.
3. Press
1. Open the flip and press the
an incoming call. If the Any key menu option(Menu 4.4.2) has
been set to , any key press will answer a call except for the
key or the right soft key.
key or the left soft key to answer
.
Making International Calls
1. Press and hold the
key for the international prefix. The ‘+’
Notice
]
character can be replaced with the international access code.
To reject an incoming call, press and hold the side keys on the left
side of the phone without opening the flip.
2. Enter the country code, area code, and the phone number.
]
3. Press
.
If the Flip open menu option(Menu 4.4.2) is set to
, you do not
need to press any key. You can answer the call simply by opening
the flip.
Ending a Call
2. End the call by closing the phone or pressing the
key.
When you have finished a call, press the
key.
Notice You can answer a call while using the phonebook or other
menu features.
24
25
General Functions
General Functions
Symbol Mode
Manner Mode (Quick)
This mode allows you to enter special characters.
When the flip is closed, Manner Mode can be activated by
pressing and hold down Side keys.
Notice You can select a different T9 language from the menu option.
The default setting on the phone is T9 enabled mode.
Signal Strength
To turn it off, select the T9 Off option from the menu.
Since the antenna is fixed, it does not extend. If you are inside a
building, being near a window may give you better reception. You
Changing the Text Input Mode
1. When you are in a field that allows characters to be entered, you
can see the strength of your signal by the signal indicator (
your phone’s display screen.
) on
will notice the text input mode indicator in the upper right corner
of the display.
Write message
Entering Text
1
En T9
918
You can enter alphanumeric characters by using the phone’s
keypad. For example, storing names in the phonebook, writing a
message, creating a personal greeting or scheduling events in the
calendar all require entering text.
Options
Back
Following text input methods are available in the phone.
2. If you want to change modes, press the
key. The available
T9 Mode
modes are displayed.
This mode allows you to enter words with only one keystroke per
letter. Each key on the keypad has more than one letter. The T9
mode automatically compares your keystrokes with an internal
linguistic dictionary to determine the correct word, thus requiring
far fewer keystrokes than the traditional ABC mode.
Using the T9 Mode
The T9 predictive text input mode allows you to enter words easily
with a minimum number of key presses. As you press each key, the
phone begins to display the characters that it thinks you are typing
based on a built-in dictionary. As new letters are added, the word
changes to reflect the most likely candidate from the dictionary.
ABC Mode
This mode allows you to enter letters by pressing the key labeled
with the required letter once, twice, three or four times until the
letter is displayed.
1. When you are in the T9 predictive text input mode, start entering
a word by pressing keys
to
. Press one key per letter.
]
The word changes as letters are typed - ignore what's on the
screen until the word is typed completely.
123 Mode (Numbers Mode)
Type numbers using one keystroke per number. To change to 123
]
If the word is still incorrect after typing completely, press the
down navigation key once or more to cycle through the other
word options.
mode in a text entry field, press
displayed.
key until 123 mode is
26
27
General Functions
General Functions
Example: Press
to type Good
[down navigation key] to type
Notice Refer to the table below for more information on the
characters available using the keys.
Press
Home
]
Characters in the Order Display
Upper Case Lower Case
Key
If the desired word is missing from the word choices list, add it
by using the ABC mode.
¡
¡
¿
¿
1
2
3
4
5
6
7
8
9
0
. , -
?
!
1
. , -
?
!
1
2. Enter the whole word before editing or deleting any keystrokes.
@
@
3. Complete each word with a space by pressing the
key.
A B C Á Ã Ç 2
a b c á ã ç 2
To delete letters, press right soft key[Clear]. Press and hold down
right soft key[Clear] to erase entire words.
D E F É 3
G H I Í 4
d e f é 3
g h i í 4
Notice To exit the text input mode without saving your input,
press
. The phone returns to the previous menu level.
J K L 5
j k l 5
Using the ABC Mode
Use the to keys to enter your text.
M N O Ó Ñ 6
P Q R S 7
T U V Ú Ü 8
W X Y Z 9
Space Key
m n o ó ñ 6
p q r s 7
t u v ú ü 8
w x y z 9
Space Key
1. Press the key labeled with the required letter:
]
Once for the first letter
Twice for the second letter
And so on
]
]
2. To insert a space, press the
key once. To delete letters,
press the right soft key[Clear]. Press and hold down the right
soft key[Clear] to clear the display.
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter numbers in a text message
(a telephone number, for example).
Press the keys corresponding to the required digits before
manually switching back to the appropriate text entry mode.
Using the Symbol Mode
The Symbol Mode enables you to enter various symbols or special
characters.
To enter a symbol, press the
key. Use the navigation keys to
select the desired symbol and press the [OK] key.
28
29
General Functions
General Functions
In-Call Menu
Phonebook
You can store phone numbers and their corresponding names in
the memory of your SIM card.
Your phone provides a number of control functions that you can
use during a call. To access these functions during a call, press
the left soft key [Options].
In addition, you can store up to 100 numbers and names in the
phone memory.
During a Call
The SIM card and phone memory, although physically separate,
are utilized like a single entity known as the Phonebook. (See page
65 for details)
The menu displayed on the handset screen during a call is different
than the default main menu displayed when in idle screen, and the
options are described below.
Making a Second Call
You can get a number you wish to dial from the phonebook to
make a second call. Press the right soft key then select Search.
To save the dialed number into the phonebook during a call, press
the right soft key then select Add New.
Swapping Between Two Calls
To switch between two calls, press the left soft key, and then select
Swap.
Answering an Incoming Call
To answer an incoming call when the handset is ringing, simply
press the
key. The handset is also able to warn you of an
incoming call while you are already on a call. A tone sounds in the
earpiece, and the display will show that a second call is waiting.
This feature, known as Call Waiting, is only available if your
network supports it. For details of how to activate and deactivate it
see Call Waiting [Menu 4.4.4].
If Call Waiting is on, you can put the first call on hold and answer
the second, by pressing
or by pressing the left soft key, and
then selecting the Hold call. You can end the current call and
answer the waiting call by pressing the left soft key and then
selecting Active call menu of End call.
30
31
General Functions
General Functions
Rejecting an Incoming Call
Making a Second Call
You can reject an incoming call without answering by simply
pressing the key.
You can make a second call while currently on a call. Enter the
second number and press the . When the second call is
connected, the first call is automatically placed on hold. You can
swap between calls, by selecting the left soft key and then
selecting Swap.
During a call, you can reject an incoming call by pressing the left
soft key, which is the [Menu] key and selecting the
Conference/Reject or by pressing the
key.
Setting Up a Conference Call
Muting the Microphone
To set up a conference call, place one call on hold and while the
active call is on, press the left soft key and then select the Join
menu of Conference call.
You can mute the microphone during a call by pressing the
[Menu] key then selecting Mute on. The handset can be
unmuted by pressing the Mute off menu. When the handset is
muted, the caller cannot hear you, but you can still hear them.
Activate the Conference Call on Hold
To activate a conference call on hold, press the left soft key, and
then select the Join menu of Conference call.
Switching DTMF Tones on During a Call
To turn DTMF tones on during a call, press the left soft key, and
then select DTMF on. DTMF tones can be turned off the same
way. DTMF tones allow your phone to make use of an automated
switchboard.
Adding Calls to the Conference Call
To add a call to an existing conference call, press the left soft key,
and then select the Join menu of Conference call.
Multiparty or Conference Calls
Displaying Callers in a Conference Call
The multiparty or conference service provides you with the ability to
have a simultaneous conversation with more than one caller, if your
network service provider supports this feature. A multiparty call can
only be set up when you have one active call and one call on hold,
both calls having been answered. Once a multiparty call is set up,
calls may be added, disconnected or separated (that is, removed
from the multiparty call but still connected to you) by the person
who set up the multiparty call. These options are all available from
the In-Call menu. The maximum callers in a multiparty call are five.
Once started, you are in control of the multiparty call, and only you
can add calls to the multiparty call.
To scroll through the numbers of the callers who make up a
conference call on the handset screen, press the up/down
navigation keys.
Private Call in a Conference Call
To have a private call with one caller from a conference call,
display the number of the caller you wish to talk to on the screen,
then press the left soft key. Select the Private menu of Conference
call to put all the other callers on hold.
32
33
General Functions
Menu Tree
The following illustration shows the available menu structure and
indicates the:
Ending a Conference Call
Currently displayed caller from a conference call can be
]
Number assigned to each menu option.
disconnected by pressing the
key.
]
Page where you can find the feature description.
1. Messages (see page 39)
1.1 Text messages
1.1.1 Write message
1.1.2 Inbox
2. Call register (see page 47)
2.1 Missed calls
2.2 Received calls
2.3 Dialed calls
2.4 Delete recent calls
2.4.1 Missed calls
1.1.3 Outbox
1.1.4 Draft
1.1.5 Settings
2.4.2 Received calls
2.4.3 Dialed calls
1.1.6 Delete all
2.4.4 All calls
*
1.2 Voice messages
2.5 Call durations
2.5.1 Last call
1.2.1 Listen to voice
messages
2.5.2 Received calls
2.5.3 Dialed calls
1.2.2 Voice mailbox
number
2.5.4 All calls
*
2.6 Call costs
*
1.3 Info service
2.6.1 Last call’s cost
2.6.2 All calls’ cost
1.3.1 Receive
1.3.2 Inbox
*
2.7 Cost settings
1.3.3 Topics
2.7.1 Call cost’s limit
2.7.2 Set tariff
1.3.4 Alert
1.3.5 Auto display
1.3.6 Languages
2.7.3 Auto display
1.4 Templates
1.5 Name card
1.6 Check memory
:
Shown only if supported by CPHS(Common PCS Handset
Specification)
*
34
35
Menu Tree
Menu Tree
3. Profiles (see page 51)
3.1 Vibrate only
3.1.1 Activate
4. Settings (continued)
5. Organizer (see page 62)
5.1 Schedule
5.2 Memo
7. Internet (see page 74)
4.4 Call settings
7.1 GoRogers
*
4.4.1 Call forwarding
7.2 Push messages
7.2.1 Inbox
3.2 Silent
4.4.2 Answer mode
5.3 Phonebook
5.3.1 Search
*
3.2.1 Activate
4.4.3 Send my number
7.2.2 Receive
*
3.2.2 Personalize
3.2.3 Rename
3.3 General
3.3.1 Activate
4.4.4 Call waiting
4.4.5 Minute minder
4.4.6 Auto redial
5.3.2 Add new
7.3 Cache settings
7.3.1 Clear cache
7.3.2 Cache check
7.4 WAP information
5.3.3 Speed dials
5.3.4 Caller groups
5.3.5 Copy all
*
4.4.7 Select line
*
3.3.2 Personalize
3.3.3 Rename
3.4 Loud
4.4.8 Closed user group
4.5 Security settings
4.5.1 PIN code request
5.3.6 Delete all
5.3.7 Settings
5.3.8 Information
*
3.4.1 Activate
4.5.2 Call barring service
3.4.2 Personalize
3.4.3 Rename
3.5 Headset
3.5.1 Personalize
3.6 Car
4.5.3 Fixed dial number
4.5.4 Change codes
6. Fun & Tools (see page 70)
6.1 Game
*
4.6 Network settings
4.6.1 Automatic
6.2 My folder
6.2.1 Picture
4.6.2 Manual
6.2.2 Animation
3.6.1 Personalize
4.6.3 Preferred
6.2.3 Sound
4.7 Reset settings
6.3 Unit converter
6.4 Calculator
6.5 World time
4 Settings (see page 52)
4.1 Alarm clock
4.2 Date & Time
settings
4.2.1 Date & Time
4.2.2 Auto update
4.3 Phone settings
4.3.1 Display settings
4.3.2 Power on sound
*
4.3.3 Languages
4.3.4 LED indicator
:
Shown only if supported by CPHS(Common PCS Handset Specification)
*
36
37
Selecting Functions and Options
Messages
Your phone offers a set of functions that allow you to customize the
phone. These functions are arranged in menus and sub-menus,
Text Messages
Menu 1.1
Your phone receives voice mail notification messages and Short
Message Service (SMS) messages.
Voice mail and SMS are network services. Please contact your
service provider for more information.
accessed via the two soft keys marked
and
. Each menu
and sub-menu allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the current context; the
label on the bottom line of the display just above each key
indicates its current role.
When the
When the
icon appears, you have received a new voice mail.
icon appears, you have received a new text
message. If the message memory is full, an error message is
displayed, the icon flashes and you cannot receive any new
messages. Use the Delete option in the Inbox (Menu 1.1.2) to
delete obsolete messages. Once there is space in the memory any
undelivered SMS messages will be received (provided sufficient
space is available).
(Menu 1.1.1)
Write Message
You can write and edit text messages of up to 918 characters.
1. Type in a message using key presses. For details on how to
enter text, refer to page 26 (Entering Text).
2. After completing the message select the required option by
pressing the left soft key [Options].
The following options are available.
]
Send to number: Enter the phone number or select the
number from the phone book.
]
Send to email: Enter the email or select the email from the
phone book.
*
]
Save to draft: Save the message so that it can be sent later.
Press the left soft key Press the right soft
]
to access the
key to access the
available names.
Attach:
available menu.
• Symbol: Attach special characters.
• Picture: Send and receive text messages that contain
pictures, known as ‘picture messages’. Several preset pictures
are available in the phone and they can be replaced with new
ones received from other sources.
:
38
Shown only if supported by SIM card
39
*
Messages
Messages
]
]
• Animation: Attaching an animation in a message can be
done through EMS(Enhanced Messaging Service).
Return call: Call back the sender.
Extract: Extract picture, sound, text webpage and email
address from the message. They will be saved in My Folder,
phonebook or bookmarks.
• Sound: Attach sounds that are available for short message.
• Text template: Use the text templates already set in the
phone.
]
Delete: Deletes the selected message from the Inbox.
• Phone number: Attach a phone number.
(Menu 1.1.3)
Outbox
• Name card: Attach your name card.
View lists and contents of sent messages in this menu and also
verify if transmission was successful.
]
T9 languages: Choose between English or French T9 language.
For details on how to enter text, refer to page 27 (Using the T9
Mode).
The following options are available.
]
]
]
Clear text: Deletes the written message.
Forward: Forwards the current message to other recipients.
]
Exit: Exit the text editor.
Delete: Deletes the selected message from the Outbox.
(Menu 1.1.2)
Inbox
Icon directive
[
[
] Sent SIM email
] Sent email
[
[
] Sent SIM message
] Sent message
Received text messages, page messages, and email lists may be
searched and the contents may be viewed.
Received messages are displayed from newest to oldest.
1. Press the left soft key [Menu].
(Menu 1.1.4)
Draft
2. Press
.
This menu option shows the preset message list. Scroll through the
list using the up/down navigation keys.
3. Select
.
Icon directive
The following options are available.
[
[
[
[
[
] Read SIM email
] Unread SIM email
] Read email
[
[
[
[
[
] Unread SIM message
] Read message
]
Send: Sends the current message to other recipients.
]
Delete: Deletes the selected preset message.
] Unread message
] Unread email
] Read delivery report
] Unread delivery report
] Read SIM message
The following options are available.
]
Reply: Replies to the received message.
]
Forward: Forwards a received message to other recipients.
After recipients are entered, the message can be forwarded.
40
41
Messages
Messages
(Menu 1.1.5)
Settings
Menu 1.2
Voice Messages
*
This menu allows you to set up default SMS information.
This menu provides you with a quick way of accessing your voice
mailbox (if provided by your network).
Before using this feature, you must enter the voice server number
obtained from your service provider.
]
Message types: Allows you to set the default message type
*
*
*
*
(Text, Voice, Fax, Paging, X.400, E-mail, ERMES). The network
can convert the messages into the selected format. The type of
message you desire can be set to Text Type.
When new voicemail is received, the symbol will be displayed on
the screen. Please check with your network service provider for
details of their service in order to configure the handset
accordingly.
]
Valid period: Allows you to set the length of time for which
your text messages will be stored at the SMS center while
attempts are made to deliver them to the recipient. Possible
values are Maximum, 30minutes, 1hour, 6hours, 1day and
1week which can be authorized by your service provider.
(Menu 1.2.1)
Listen to Voice Messages
]
]
]
Once this option has been selected, simply press the left soft key
[OK] to listen to voicemail messages. You may also hold down the
key in standby mode to listen to voicemail messages.
Delivery reports: Allows you to activate or deactivate the
report function. When this function is activated, the network
informs you whether or not your message has been delivered.
Reply with same service: Allows the recipient of your SMS
message to send you a reply via your message center, if the
service is provided by the network.
*
*
(Menu 1.2.2)
Voice Mailbox Number
You can input and set the number of voice mail.
Message center number: Allows you to store or change the
number of your email gateway required when sending text
messages. You must obtain this number from your service
provider.
]
Email gateway: Allows you to store or change the number of
your email gateway required when sending text messages.
]
]
Subject: If you set it to on, allows you to enter the subject.
*
*
Bearer setting: You can select GSM or GPRS. Contact your
network operator or service provider for information related to
setting a selected bearer, pricing and connection speed.
GSM Only/GPRS Only
(Menu 1.1.6)
Delete All
Allows you to delete all messages.
:
42
43
Shown only if supported by SIM card
*
Messages
Messages
(Menu 1.3.6)
Languages
Menu 1.3
Info Service
*
This option allows you to select the language preferred. The cell
broadcast message will be displayed in the language selected.
If you use all languages supported by phone, select ‘Automatic’
at the bottom of the list.
Info service messages are text messages sent by the network to
GSM phone users. They provide general information such as
weather reports, traffic news, taxis, pharmacies, and stock prices.
Each type of information is associated with a number, which can be
obtained from the service provider. When you receive an info
service message, a popup message will indicate a new message
receipt or the info service message will be displayed directly. In
standby mode, the following options are available when viewing the
info service message.
Menu 1.4
Templates
There are 6 predefined messages in the list. You can view and edit
the template messages or create new messages.
• Please call me back
• I’m late. I will be there at
• Where are you now?
• I’m on the way.
(Menu 1.3.1)
Receive
Ability to enable or disable the reception of broadcast messages.
• Top urgent. Please contact.
• I love you
(Menu 1.3.2)
Inbox
The following options are available.
The list of received broadcast messages can be searched and the
contents viewed.
]
Edit: Allows you to write a new message or edit the selected
template message.
(Menu 1.3.3)
Topics
]
Delete: Allows you to delete the selected template message.
To create new topics, press the left soft key[OK] and then select
the new topics menu by pressing the left soft key [Options].
You can Deactivate, Edit, Delete and Add new topics by
pressing the left soft key [OK].
]
Send via text message: Sends the selected template
message by SMS.
]
Add new: Allows you to create new messages.
(Menu 1.3.4)
Alert
Ability to select the alert type for a new message.
(Menu 1.3.5)
Auto Display
This option will automatically display all broadcast messages
received. Scroll through the messages using the up/down
navigation keys.
:
44
Shown only if supported by SIM card
45
*
Messages
Call Register
You can check the record of missed, received, and dialed calls
only if the network supports the Calling Line Identification (CLI)
within the service area.
Menu 1.5
Name Card
This option allows you to make your own name card. Key in the
Name, Mobile number, Office number, Fax number and E-mail
address.
The number and name (if available) are displayed together with the
date and time at which the call was made. You can also view call
times and costs.
]
Edit: Allows you to write a new message or edit the selected
name card.
Menu 2.1
Missed Calls
]
Delete: Allows you to delete the selected name card.
This option lets you view the last 10 unanswered calls.
You can also:
]
Send via text message: Sends the selected name card by
SMS.
• View the number if available and call it, or save it in the
phonebook
Menu 1.6
Check Memory
You can check how many free locations are in the phonebook.
• Enter a new name for the number and save both in the
phonebook
• Send a message by this number
• Delete the call from the list
• Delete all missed calls from the list
Received Calls
Menu 2.2
This option lets you view the last 10 incoming calls.
You can also:
• View the number if available and call it, or save it in the
phonebook
• Enter a new name for the number and save both in the
phonebook
• Send a message by this number
• Delete the call from the list
• Delete all incoming calls from the list
46
47
Call Register
Call Register
Notice The actual time invoiced for calls by your service provider
Menu 2.3
Dialed Calls
may vary, depending upon network features, rounding-off
for billing, and so forth.
This option lets you view the last 10 outgoing calls(called or
attempted). You can also:
• View the number if available and call it or save it in the phonebook
• Enter new name for the number and save both in the phonebook
• Send a message by this number
Call Costs
Menu 2.6
*
Call costs allows you to check the cost of the last call or all calls.
The call costs are displayed separately for each SIM card. To reset
the cost, you need the PIN2 code.
• Delete the call from the list
The following options are available:
• Delete all incoming calls from the list
(Menu 2.6.1)
Last Call’s Cost
Menu 2.4
Delete Recent Calls
Cost of the last call made.
Allows you to delete Missed, Received and Dialed calls lists.
You can delete all call lists at one time.
(Menu 2.6.2)
All Calls’ Cost
Menu 2.5
Call Durations
Total cost of all calls made since the cost counter was last reset. If
the total cost exceeds the maximum cost set, you will no longer be
able to make any calls, except calls to the emergency services,
until you reset the counter.
Allows you to view the duration of your incoming and outgoing calls.
You can also reset the call times.
The following timers are available:
Notice The actual cost invoiced for calls by your service provider
may vary, depending upon network features, rounding-off
for billing, tax, and so forth.
(Menu 2.5.1)
Last Call
Length of the last call.
(Menu 2.5.2)
Received Calls
Length of the incoming calls.
(Menu 2.5.3)
Dialed Calls
Length of the outgoing calls.
(Menu 2.5.4)
All Calls
Total length of all calls made and incoming calls since the timer was
last reset.
:
48
Shown only if supported by SIM card
49
*
Call Register
Profiles
In Profiles, you can adjust and customize the phone tones for
different events, environments, or caller groups.
Cost Settings
Menu 2.7
*
There are six preset profiles: Vibrate only, Silent, General,
Loud, Headset and Car. Silent, General and Loud profiles can be
customized to meet your needs.
(Menu 2.7.1)
Call Cost’s Limit
This network service allows you to limit the cost of your calls by
selected charging units. If you select Read, the number of
remaining unit is shown. If you select Change, you can change
your charge limit.
Changing the profile
1. A list of profiles opens.
2. In the Profiles list, scroll to a desired profile and select
‘Activate’.
(Menu 2.7.2)
Set Tariff
You can set the currency type and the unit price. Contact your
service providers to obtain charging unit prices. To select the
Currency or 1 Unit in this menu, you need the PIN2 code.
Customizing profiles (Personalize)
1. To modify a profile, scroll to the desired profile in the Profiles list
and select ‘Personalize’. A list of profile settings opens.
Note When all units have been used, no calls can be made except
emergency calls. Depending on the SIM card, you need the
PIN2 code to set a call cost limit.
2. Scroll to the setting you want to change and press the up/down
navigation keys to open the following choices:
(Menu 2.7.3)
Auto Display
• Incoming call alert: To set the alert type for incoming call.
This network service allows you to see automatically the cost of
your last calls. If you select On in Auto Display menu, you can
see the cost of the last call when the call is released.
• Ringing tone: To set the ringing tone for voice calls, choose
one from the list. Scroll through the list and listen to the desired
tone prior to making a selection. Press any key to stop the
sound.
• Ringing volume: To set the volume level for the ringing tones.
• Message alert type: To set the alert type for messages.
• Message alert tone: To set the alert tone for messages.
• Key volume: To set the volume level for keypad tones.
Customizing profiles (Rename)
1. To modify a profile, scroll to the desired profile in the Profiles list
and select ‘Rename’.
2. You can rename a profile and give it any name you want. The
Vibrate only, Headset and Car profiles cannot be renamed.
:
50
Shown only if supported by SIM card
51
*
Settings
Settings
Alarm Clock
Date & Time Settings
Menu 4.1
Menu 4.2
Set the alarm to ring at a specific time. In the Alarm Clock menu,
the following options are available.
(Menu 4.2.1)
Date & Time
On: Set the time(hour and minute) for activating the alarm.
This option allows you to change the current time and date
displayed.
1. Enter the menu.
2. Select [On] by pressing the right/left navigation keys.
3. If you want to set the time for activating the alarm, press the
down navigation key.
The following options are available:
]
Set date: Allows you to enter the day, month and year. You
can change the date format via the Date Format menu option.
4. Enter the required time, press the down navigation key.
5. The following options are available.
Format : Allows you to change the time and date formats.
]
Date format
• Once: The alarm rings only once and is then deactivated.
• Daily: The alarm rings every day at the same time.
YYYY/MM/DD(year/month/day)
DD/MM/YYYY(day/month/year)
MM/DD/YYYY(month/day/year)
• Weekly: The alarm rings every week on the same day and at
the same time.
]
Set time: Allows you to enter the current time. You can choose
the time format via the Time Format menu option.
• Monthly: The alarm rings every month on the same day and
at the same time.
]
Time format
6. Allows you to select the alarm melody by using the right/left
navigation keys.
24 hours/12 hours
7. Press the left soft key [Set].
(Menu 4.2.2)
Auto Update
Off: Cancel the alarm.
Select On to set the phone to automatically update the time and
date according to the current time zone.
Notice If this option is set to On, the alarm will ring at the specified
time, even when the phone is switched off.
To stop the alarm when it rings, open the phone and press
the right soft key[Quit].
52
53
Settings
Settings
Languages
(Menu 4.3.3)
Phone Settings
Menu 4.3
*
You can select the display language. When the language option is
set to Automatic, the language is automatically selected according
to the language of the SIM card used. English will be set if the
language on the SIM card is not supported in the phone.
Many different features of your phone can be customized to suit
your preferences. All of these features are accessed via the
Phone Settings menu.
(Menu 4.3.1)
Display Settings
(Menu 4.3.4)
LED indicator
]
Wallpaper: You can set up the screen displayed on the LCD
This option allows you to select whether or not the service light on
the top of the phone is used.
screen in the standby mode.
]
Backlight: You can select whether or not the phone uses the
The following options are available.
backlight. A marginal increase in the standby/talk time can be
achieved by turning the backlight off.
]
Enable: The service light flashes when the phone is ready for use.
- Off means that the backlight is never on.
]
Disable: The service light is not used.
- 10 seconds turns the backlight off 10 seconds after the
last key was pressed.
Call Settings
Menu 4.4
- 30 seconds turns the backlight off 30 seconds after the
last key was pressed.
To change the settings for call diverting:
(Menu 4.4.1)
Call Forwarding
- 60 seconds turns the backlight off 60 seconds after the
last key was pressed.
*
When this network service is activated, you can direct your incoming
calls to another number, for example, to your voice mailbox number.
For details, contact your service provider. Select one of the divert
options, for example, select If busy to divert voice calls when your
number is busy or when you reject incoming calls.
- Always on turns the backlight always on while flip is
opened.
]
Contrast: This option allows you to adjust the contrast of the
LCD screen by pressing the navigation key.
The following options are available:
(Menu 4.3.2)
Power on Sound
]
All voice calls: Diverts voice calls unconditionally.
This menu enables or disables the phone sounds when it is
switched on or off
]
If busy: Diverts voice calls when the phone is in use.
]
If no reply: Diverts voice calls which you do not answer.
]
On: The phone sounds when it is switched on, and when
switched off.
]
If out of reach: Diverts voice calls when the phone is switched
off or out of coverage.
]
Off: Neither does the phone sounds when it is switched on or
off.
]
All data calls: Diverts to a number with a PC connection
unconditionally.
:
54
Shown only if supported by SIM card
55
*
Settings
Settings
]
(Menu 4.4.5)
All fax calls: Diverts to a number with a fax connection
unconditionally.
Minute Minder
This option allows you to specify whether the phone must beep
every minute during an outgoing call to keep you informed of the
length of the call.
• Activate: Activates the corresponding service.
- To voice mail: Forwards to voice mail center. This function
does not include All data calls and All fax calls menus.
(Menu 4.4.6)
Auto Redial
- To other number: Inputs the number for diverting.
• Cancel: Cancels the corresponding service.
• View status: Checking the status of the service.
Cancel all: Cancels all call forwarding service.
Select On, and your phone will make a maximum of three attempts
to connect the call after an unsuccessful call attempt.
(Menu 4.4.7)
]
Select Line
*
*
This setting is shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which phone line (Line 1
or Line 2) you want to use for making calls and sending short
messages. Calls on both lines can be answered irrespective of the
selected line.
(Menu 4.4.2)
Answer Mode
Allows you to determine when to answer the phone.
]
Flip open: This option allows you to answer a call simply by
opening the flip.
Note You will not be able to make calls if you select Line 2 and
]
]
Any key: You can answer an incoming call by pressing any
have not sbscribed to this network service.
key, except the
Only send key: You can answer an incoming call by only
pressing the key.
key.
(Menu 4.4.8)
Closed User Group
Closed user group is a network service that specifies the group of
people whom you can call and who can call you. For more
information contact your network operator or service provider. If a
group index is specified, it is used for all outgoing calls. If no group
index is specified, the network will use the preferential index
(a specific index that is stored in the network).
(Menu 4.4.3)
Send My Number
*
*
This network service allows you to set your phone number to be
displayed (On) or hidden (Off) from the person to whom you are
calling. Select Set by network to reset the phone to the setting
that you have agreed upon with your service provider.
]
Preset: Setting the selected CUG Index.
]
On: Activating and editing the CUG Index.
(Menu 4.4.4)
Call Waiting
]
Off: Deleting the selected CUG.
The network will notify you of a new incoming call while you have a
call in progress. Select Activate to request the network to
activate call waiting, Cancel to request the network to deactivate
call waiting, or View status, to check if the function is active or
not.
:
56
57
Shown only if supported by SIM card
*
Settings
Settings
]
]
Cancel all barrings: All call barring settings are deactivated;
Menu 4.5
Security Settings
calls can be made and received normally.
Various codes and passwords are used to protect the features of
your phone. They are described in the following sections (see
pages 22~23).
Change password: You can set and change the call barring
password obtained from your service provider using this option.
You must enter the current password before you can specify a
new one.Once you have entered a new password, you are
asked to confirm it by entering it again.
(Menu 4.5.1)
PIN Code Request
When the PIN code request feature is enabled, you must enter your
PIN each time you switch the phone on. Consequently, any person
who does not have your PIN cannot use your phone without your
approval.
Note To use Call Barring service, you must input the network
password. When calls are barred, calls may be possible to
certain emergency numbers in some networks.
Fixed Dial Number (FDN)
(Menu 4.5.3)
Note Before disabling the PIN code request feature, you must enter
Allows you to restrict your outgoing calls to selected phone
numbers, if this function is supported by your SIM card. The PIN2
code is required.
your PIN
The following options are available:
• Enable: You must enter the PIN each time the phone is
The following options are available:
switched on.
]
Enable: You can only call phone numbers stored in the
phonebook. You must enter your PIN2.
• Disable: The phone connects directly to the network when you
switch it on.
]
Disable: You can call any number.
(Menu 4.5.2)
Call Barring Service
]
Number list: You can view the number list saved as fixed dial
*
number.
Call barring allows you to restrict from making and receiving calls
with your phone. For this function, you need the barring password,
which you can obtain from your service provider.
Note Not all SIM cards have a PIN2. If your SIM card does not, this
menu option is not displayed.
The following options are available:
(Menu 4.5.4)
Change Codes
]
All outgoing: Calls cannot be made.
]
Outgoing international: International calls cannot be made.
The Change codes feature allows you to change your current
password to a new one. You must enter the current password
before you can specify a new one.
]
Outgoing international except home country: When
abroad, calls can be made only to numbers within the current
country and to your home country, which is where your home
network provider is located.
You can change the access codes: Security code, PIN1 code,
PIN2 code
]
All incoming: Calls cannot be received.
Note PIN: Personal Identification Number.
]
Incoming when abroad: Calls cannot be received when you
are using your phone outside your home service area.
:
58
Shown only if supported by SIM card
59
*
Settings
Settings
Menu 4.6
Network Settings
Reset Settings
*
Menu 4.7
The Network Settings feature enables you to indicate whether the
network used when roaming(outside your home area) is selected
Automatic, Manual, and Preferred.
You can easily reset your phone to its default configuration.
To do so, proceed, as follows.
1. Select the Reset Settings menu option.
Note You can select a network other than your home network only if
2. Enter the 4-digit phone password.
it has a valid roaming agreement with your home network.
Note The password is preset to 0000.
(Menu 4.6.1)
Automatic
Allows you to set the phone to automatically search for and select
one of the cellular networks available in your area.
The phone will be set to Automatic even though the power is off
and on.
(Menu 4.6.2)
Manual
Allows you to select the desired network manually from a list of
networks. If the connection to the manually selected network is lost,
the phone will sound an error tone and ask you to select a network
again. The selected network must have a roaming agreement with
your home network, that is, the operator whose SIM card is in your
phone. The phone lets you select another network if the phone fails
to access the selected network. If you switch off the phone, the
phone will be reset to Automatic.
(Menu 4.6.3)
Preferred
You can set a list of preferred networks the handset should attempt
to register with first, before attempting to register to any other
networks. This list is created from the handset’s predefined list of
known networks.
:
60
Shown only if supported by SIM card
61
*
Organizer
Organizer
• Scheduler tone
Menu 5.1
Schedule
The phone can sound an alarm tone when the scheduled date for
an event has been reached with this option.
When you enter this menu a calendar will be displayed. Top of the
screen indicates sections for date. Square cursor is used to locate
a particular day. The under bar on the calendar indicates a
schedule or memo on that day. This function helps to remind you of
the schedule and memo. The phone will sound an alarm tone if it
has been set for a specific note.
• View all schedules
Shows the notes that are set for all days. Use the up/down
navigation keys to browse through the note lists. You can use the
menu by press the left soft key [Options].
For changing the day, month, and year.
• Go to date
Key
Description
Weekly
Allows you to jump to a specific date.
up/down navigation key
left/right navigation key
• Delete past
Daily
Delete past schedule event that has already been notified.
• Delete all
Note Your phone should be switched on to use this function.
Delete all schedules. You are asked to confirm your action.
• View
Press [Options] to delete or edit the note you selected.
• Edit
Note You can see Edit, Delete,View all schedules, Delete
past, and Delete all menus dependent on setting of the
schedule.
Allows you to edit the schedule.
• Delete
Allows you to delete the schedule.
• Add new
You can edit maximum of 30 characters and create up to 30
notes.
• Calendar
Allows you to consult the calendar.
62
63
Organizer
Organizer
Memo
Phonebook
Menu 5.2
Menu 5.3
You can store phone numbers and their corresponding names in
the memory of your SIM card. In addition, you can store up to 100
numbers and names in the phone memory. The SIM card and
phone memories, although physically separate, are used as if they
were a single entity, called the phonebook.
To write, edit and delete a memo on a specific date, proceed as
follows.
1. Scroll to highlight Memo.
2. Press the left soft key [Add].
3. Input the memo and press the left soft key [Options].
1. To use the Phonebook, press the right soft key [Names] in
the standby mode.
The following options are available.
2. To use the Phonebook, press the left soft key [Menu] in the
]
Save: Allows you to save the memo.
standby mode and select the Organizer.
]
T9 languages: Allows you to select the T9 language to use in
memo.
Note To use the Phonebook, press the right soft key [Names] in
standby mode or press the left soft key [Menu],
,
.
]
Exit editor: Allows you to exit in memo editor.
Or
(Menu 5.3.1)
Search
1. Select a Memo.
2. Press the left soft key [Select].
3. Press the left soft key [Options].
1. When the idle screen is displayed, press the right soft key
[Names]. You are asked to enter a name.
2. Enter the start of the name that you wish to find and press
The following options are available.
the left soft key [Search].
]
Edit: If you select a memo that already exists, you can press
the left soft key [Options ꢀ Edit] to edit the memo displayed.
Note You can also scroll through the phonebook from the
beginning, by pressing the left soft key [Search] directly.
]
Delete: Allows you to delete the memo. You can press the left
soft key [Options ꢀ Delete] to edit the memo displayed.
3. If you want to edit, delete, copy an entry, select [Options].
4. Once you have found the required entry, press the
to dial
]
Add new: Add a new memo, up to 20 memos and 40
characters per each memo.
the number.
• View detail: To view in detail the selected name.
]
Delete all: Allows you to delete all memos. You are asked to
confirm your action.
• Edit: You can edit the name, number, E-mail group and memo
by press the left soft key [OK].
• Delete: You can delete an entry.
• Write text message: You can write text a message.
For further details, see page 39.
• Copy: You can copy an entry from SIM to phone or from phone
to SIM.
64
65
Organizer
Organizer
(Menu 5.3.4)
• Main Number: You can select the main number out of your
mobile, home or office numbers. Choose the one that is most
often used. The main number will be displayed first, if you set
this.
Caller Groups
There are 7 predefined groups as well as one additional group
labeled Others where you can create your own lists.
1. You can set the phone to ring in a specific way and display a
(Menu 5.3.2)
Add New
preselected graphic icon when a particular person calls you.
You can add a phonebook entry by using this function.
2. Scroll to Caller Groups then press the left soft key [OK] to enter
Phone memory capacity is 100 entries. SIM card memory capacity
depends on the cellular service provider. You can also save 20
characters of name in the phone memory, and save characters in
the SIM card. The number of characters is dependent on the SIM.
this menu.
3. Every Group list will be displayed : Family, VIP, Friends,
Colleague, Group 1, Group 2, Others.
4. Select the Group name that you want to manage by pressing
1. Open the phonebook first by pressing the right soft key
the left soft key [Options].
[Names] in standby mode.
5. You will see the following submenus under the predefined groups
2. Scroll to highlight Add New, and press the left soft key [OK].
3. Enter a name and then press the down navigation key.
4. Enter a number and then press the down navigation key.
except for the Others group.
• Member list: Allows you to see the member list in the group.
• Group ring tone: Allows you to select the ring tone to be used
when you receive a voice phone call from a person in the group.
5. You can set a group for the entry by pressing the right/left
navigation key.
• Group icon: Allows you to select the graphic icon to be
displayed when you receive a call from a person in the group.
6. Press left soft key [Save].
• Add member: Allows you to add the member to the group.
(Menu 5.3.3)
Speed Dials
• Delete member: Allows you to delete the member in the
group.
You can assign any of the keys,
to
with a name list entry.
You can call directly by pressing this key for 2~3 seconds.
• Rename: Allows you to assign a name to the group.
1. Open the phonebook first by pressing the right soft key
[Names] in a standby mode.
(Menu 5.3.5)
Copy All
2. Scroll to Speed Dials, then press the left soft key [OK].
You can copy or move entries from the SIM card memory to the
phone memory and vice versa.
3. If you want to add a number to speed dial, select <Empty>.
Then, you can search the name from the phonebook.
]
SIM to Phone: You can copy the entry from the SIM card to
4. Select the name from the speed dial. You can change and
delete the name. In addition, you can call by this number and
write text message.
phone memory.
]
Phone to SIM: You can copy the entry from the phone memory
to the SIM card.
66
67
Organizer
Organizer
The following options are available:
(Menu 5.3.8)
Information
• Keep original: When copying, Original Dial Number is kept.
]
Service dial number: You can view the list of Service Dialing
Numbers (SDN) assigned by your network provider(If supported
by the SIM card). Such numbers include the emergency,
directory assistance and voice mail numbers.
*
• Delete original: When copying, Original Dial Number will be
erased.
(Menu 5.3.6)
Delete All
1. Select the Service dial number option.
2. The names of the available services will be shown.
3. Use the up/down navigation keys to select a service. Press the
key
You can delete all entries in the SIM, and Phone. This function
requires the security code except for Voice.
Press the
key to return to the standby mode.
]
Check memory: You can check how many names and
numbers are stored in the phonebook (SIM card and phone
memories).
(Menu 5.3.7)
Settings
1. Set memory: Scroll to highlight the Set memory option,
]
Own number: Allows you to display your phone number in the
SIM card.
*
then press the left soft key [OK].
• If you select Variable when adding entry, the phone will ask
where to store.
• If you select SIM or Phone, the phone will store an entry to
the SIM or the phone.
2. Search by: Scroll to highlight the Search by option, then
press the left soft key [OK].
• If you select Variable, the phone will ask how to search.
• If you select Name or Number, the phone will search an
entry by Name or the Number.
3. Set View Detail:
• If you select On, you can view the information of each member
in details. (Menu 5.3.4)
• If you select Off, you can view only name of each member.
(Menu 5.3.4)
:
68
69
Shown only if supported by SIM card
*
Fun & Tools
Fun & Tools
My Folder
Menu 6.1
Menu 6.2
Game
When you select this game, the following options are available.
Enables you to download pictures or sounds which can be used as
ringtone. You can view, listen, delete or rename downloaded data.
Note The control keys are different depending on the game.
Each game includes an introduction on the main control keys.
The common keys are listed below.
In the My folder menu, the following options are available:
(Menu 6.2.1)
Picture
[Common Key Function]
left/right soft keys : Game menu
: Game start
1. Edit Title
2. Delete
3. Delete all
(Menu 6.2.2)
Animation
1. Edit Title
2. Delete
3. Delete all
New game: Allows you to start a game.
High score: Enables you to view the highest score recorded for
the selected game.
(Menu 6.2.3)
Sound
Instruction: Help text on how to play the game.
Key info: Describes the buttons used by the game.
Continue: Allows you to continue playing the game.
1. Edit Title
2. Delete
3. Delete all
Edit Title: You can edit the title for each downloaded content.
Delete: You can delete each downloaded content.
Delete all: You can delete all downloaded content.
70
71
Fun & Tools
Fun & Tools
Menu 6.5
Menu 6.3
Unit Converter
World Time
This converts any measurement into a unit you want.
There are 4 types that can be converted into units: Length,
Surface, Weight, and Volume.
Allows you to check the current Greenwich Mean Time(GMT) and
51 major cities around the world, using the left/right navigation
keys.
1. You can select one of four unit types by pressing the left soft key
The screen shows the city name, current date and time.
[Unit].
To select the time zone in which you are located, proceed as
follows:
2. Select the standard value by using the left/right navigation keys.
3. Select the unit you want to convert by pressing the up/down
1. Select the city corresponding to your time zone by pressing the
left/right navigation keys one or more times. The local date and
time are displayed.
navigation keys.
4. You can check the converted value for the unit you want. Also,
you can input a decimal number by pressing the
key.
2. Press the left soft key [Options].
3. If you want to set, press
key.
Menu 6.4
Calculator
4. If you want to set Summer time, press the
key in
Using this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions: addition,
subtraction, multiplication and division.
Options menu.
Using the Calculator
1. Enter the first number using the numeric keys.
2. Use the navigation keys to select a sign for calculation.
Note To include a decimal point, press the
key.
3. To calculate the result, press the left soft key [Result]or
key.
72
73
Internet
Internet
You can access various WAP(Wireless Application Protocol)
services such as banking, news, weather reports, and flight
information. These services are specially designed for mobile
phones and they are maintained by the WAP service providers.
Using the Phone Keys
When surfing the Internet, the phone keys function differently from
the phone mode.
Check the availability of WAP services, pricing and tariffs with your
network operator and/or the service provider whose service you
wish to use. Service providers will also give you instructions on how
to use their services.
Key
Description
up/down navigation key
left navigation key
Scroll each line of the content area
Return to the previous page
Return to the startup homepage
Please contact your service provider to open an Internet account.
To use the Web Browser, you must indicate your phone number via
the Own number menu option (See page 69 for further details.)
Using the WAP Browser Menu
To launch the browser in standby mode, press and hold down the
key.
There are various menu options available when surfing the Wireless
Web.
Once connected, the homepage is displayed. The content
depends on the service provider.
Note The WAP Browser menus may vary, depending on your
version of the browser.
You can open any WWW page by entering its URL address.
To exit the browser at any time, press the
is displayed.
key. The idle screen
]
Clear cache: Remove the contents of cache memory.
]
Save as image: Save the image which is provided by the
WAP.
Note When connected to the internet, 2 new ICONS are displayed
on the screen. You can see
when WAP is connected
is displayed when WAP is
]
GoRogers: Connect the homepage which was set in active
profile.
through the GPRS and
connected with security mode.
]
Reload: Connect the server again and then bring back the
Navigating with the WAP Browser
page.
]
Bookmarks: Set the current homepage as a new bookmark or
move the established bookmark.
You can surf the Internet using either the phone keys or the WAP
Browser menu.
]
Save as bookmarks: Save the current URL as a bookmark.
You can also edit the bookmark title.
]
Messages: Write and save the short message.
]
Push messages: Save the push message.
]
Go to URL: Connect to the specific URL after editing.
74
75
Internet
Internet
Cache Settings
Menu 7.3
Menu 7.1
GoRogers
The information or services you have accessed are stored in the
cache memory of the phone.
Connect to a homepage. The homepage may be the site which is
defined in the activated profile. It will be defined by the Service
Provider if you have not defined it in the activated profile.
(Menu 7.3.1)
Clear Cache
Menu 7.2
Push Messages
Remove all contexts saved in cache.
(Menu 7.2.1)
Inbox
(Menu 7.3.2)
Cache Check
You can order Push messages from WAP service providers.
Push messages are notifications of, for example, news headlines
and they may contain a text message or address of a WAP service.
For availability and subscription, contact your WAP service
provider.
Set a value whether a connection attempt is made through cache
or not.
]
Always: The cache is always checked whenever URL loading
or navigating.
]
Service providers can update an existing push message every time
a new push message is received. Messages can be updated even
if you have moved them to another folder. Push messages expire
and they are deleted automatically.
Start only: The cache is only checked when the WAP is
started.
]
Off: The cache is never checked.
• Information: Shows the information of received push
messages.
Note A cache is a buffer memory, which is used to store data
temporarily.
• Load: Allows you to connect to a specific site using the
information in the received push message.
WAP Information
Menu 7.4
The WAP Browser version is displayed.
• Delete: Delete the selected push message.
(Menu 7.2.2)
Receive
You can set the option whether you will receive the message or not.
76
77
Q&A
&
Q A
Please check to see if any problems you have encountered with the
phone are described in this section before taking the phone in for a
service or calling a service engineer.
Q Why is there an echo when a connection is made with certain
telephones in a certain area?
A This is called the ‘Echo Phenomenon’, where it occurs if
connection volume is too high or caused by special properties
(semi electronic telephone exchange) of the equipment on the
other end.
Q How do I view the list of outgoing calls, incoming calls and
missed calls?
A Press the
key.
Q Why does the phone heat up?
A The phone may get hot when there is a very long call duration or
when games are played or even when surfing the Internet for a
long time. This has no effect upon the life of the product or
performance.
Q How do I clear all call history?
A Press the left soft key[Menu] and then the
key.
Q How do I view all numbers stored in memory?
A Press right soft key[Names] and then
.
Q Why is there no ring tone, but only a blinking LCD screen?
A Phone may be set to ‘Vibrate only’ or in ‘Silent’ mode. In the
Profiles menu, please select ‘General’ or ‘Loud’.
Q Why is the connection abrupt or not audible in certain areas?
A When frequency environment is unstable in a certain area,
connection may be abrupt and not audible. Relocate to another
area and try again.
Q Why does the battery life get shorter in standby mode?
A The battery is worn out. As time passes, the battery life gradually
becomes shorter. If the battery lasts about half the amount of time
as when first purchased, it’s time to purchase a new battery.
Q Why is the connection not consistent or abrupt even when
established?
A When frequency is unstable or weak or if there are too many
users, connection may be cut off even after it was established.
Please try again later or attempt after relocating to other areas.
Q Why does the battery run out so quickly during normal use?
A It is due to the user environment or a large number of calls or
weak signal.
Q Why does the LCD not turn on?
Q Why is no number dialed when you recall a phonebook entry?
A Remove the battery and turn on the power after placing it back
A Check that the number has been stored correctly, by using the
on. If there is no change, fully charge the battery and try again.
Phone book Search feature. Re-store them, if necessary.
78
79
Q&A
Accessories
There are a variety of accessories available for your mobile phone.
You can select these options according to your personal
communication requirements. Consult your local dealer for
availability.
Q Why can’t my correspondent reach me?
A Is you phone switched on (
pressed for more than three
seconds)? Are you accessing the right cellular network? Or, you
may have set an incoming call barring option.
Travel Adapter
Q I cannot find the lock, PIN, or PUK code. What is my password?
This adapter, allows you to charge
the battery.
It supports standard U.S. 120 Volt
60Hz outlets.
It takes 5 hours to charge a
completely discharged battery.
A The default lock code is ‘0000’. If you forget or lose the lock
code, contact your phone dealer. If you forget or lose a PIN or
PUK code, or if you have not received such a code, contact
your network service provider
Battery
Standard battery is available.
Vehicle Power Adapter
You can operate the phone and trickle
charge the phone battery from your
vehicle by using the vehicle power
adapter.
It takes 5 hours to charge a completely
discharged battery.
80
81
Accessories
Safety Guidelines
TIA Safety Information
Headset
Provided herein is the complete TIA Safety Information for Wireless
Handheld phones. Inclusion of the text covering Pacemakers,
Hearing Aids, and Other Medical Devices is required in the owner’s
manual for CTIA Certification. Use of the remaining TIA language is
encouraged when appropriate.
Connects to your phone, allowing
hands-free operation. Includes
earpiece, microphone, and integrated
call answer/termination button.
Exposure to Radio Frequency Signal
Your wireless handheld portable telephone is a low-power radio
transmitter and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals.
In August, 1996, the Federal Communications Commissions (FCC)
adopted RF exposure guidelines with safety levels for handheld
wireless phones. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies:
Data Cable Kit
Connects your phone to a PC.
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example, over
120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the available
body of research to develop the ANSI Standard (C95.1).
*American National Standards Institute; National Council on
Radiation Protection and Measurements; International Commission
on Non-Ionizing Radiation Protection
The design of your phone complies with the FCC guidelines (and
those standards).
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
82
83
Safety Guidelines
Safety Guidelines
]
Should ALWAYS keep the phone more than six inches from their
pacemaker when the phone is turned ON;
Phone Operation
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
]
]
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the
potential for interference.
Tips on Efficient Operation
For your phone to operate most efficiently:
]
If you have any reason to suspect that interference is taking
place, turn your phone OFF immediately.
]
Do not touch the antenna unnecessarily when the phone is in
use. Contact with the antenna affects call quality and may cause
the phone to operate at a higher power level than otherwise
needed.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may want to consult your
service provider.
Driving
Check the laws and regulations on the use of wireless phones in
the areas where you drive. Always obey them. Also, if using your
phone while driving, please:
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
]
Give full attention to driving — driving safely is your first
responsibility;
]
Use hands-free operation, if available;
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
]
Pull off the road and park before making or answering a call if
driving conditions so require.
Electronic Devices
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer
or its representative regarding your vehicle.
Pacemakers
You should also consult the manufacturer of any equipment that
has been added to your vehicle.
The Health Industry Manufacturers Association recommends that a
minimum separation of six (6’) inches be maintained between a
handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and recommendations
of Wireless Technology Research.
Posted Facilities
Turn your phone OFF in any facility where posted notices so
require.
Persons with pacemakers:
Aircraft
FCC regulations prohibit using your phone while in the air. Turn
your phone OFF before boarding an aircraft.
84
85
Safety Guidelines
Safety Guidelines
Blasting Areas
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for Devices and
Radiological Health Consumer Update on Mobile Phones.
To avoid interfering with blasting operations, turn your phone OFF
when in a ‘blasting area’ or in areas posted: ‘Turn off two-way
radio’. Obey all signs and instructions.
1.Do wireless phones pose a health hazard?
Potentially Explosive Atmosphere
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Turn your phone OFF when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury or
even death.
Wireless phones emit low levels of radiofrequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the standby mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
Areas with a potentially explosive atmosphere are often, but not
always, marked clearly. Potential areas may include: fueling areas
(such as gasoline stations); below deck on boats; fuel or chemical
transfer or storage facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air contains
chemicals or particles (such as grain, dust, or metal powders); and
any other area where you would normally be advised to turn off
your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
2.What is the FDA's role concerning the safety of
wireless phones?
Under the law, the FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radiofrequency energy (RF) at a level
that is hazardous to the user. In such a case, the FDA could
require the manufacturers of wireless phones to notify users of
the health hazard and to repair, replace, or recall the phones so
that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the wireless phone industry to take a
number of steps, including the following:
86
87
Safety Guidelines
Safety Guidelines
]
Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
3.What kinds of phones are the subject of this
update?
]
]
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
The term ‘wireless phone’ refers here to handheld wireless
phones with built-in antennas, often called ‘cell’, ‘mobile’, or ‘PCS’
phones. These types of wireless phones can expose the user to
measurable radiofrequency energy (RF) because of the short
distance between the phone and the user’s head.
These RF exposures are limited by FCC safety guidelines that
were developed with the advice of the FDA and other federal
health and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly with
increasing distance from the source. The so-called ‘cordless
phones,’ which have a base unit connected to the telephone
wiring in a house, typically operate at far lower power levels, and
thus produce RF exposures far below the FCC safety limits.
Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
The FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF safety
to ensure coordinated efforts at the federal level. The following
agencies belong to this working group:
o National Institute for Occupational Safety and Health
o Environmental Protection Agency
o Occupational Safety and Health Administration
o National Telecommunications and Information Administration
4.What are the results of the research done
already?
The National Institutes of Health participates in some interagency
working group activities, as well.
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research methods.
Animal experiments investigating the effects of radiofrequency
energy (RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have suggested that
low levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that showed
increased tumor development used animals that had been
genetically engineered or treated with cancer-causing chemicals
so as to be pre-disposed to develop cancer in the absence of RF
exposure. Other studies exposed the animals to RF for up to 22
hours per day. These conditions are not similar to the conditions
under which people use wireless phones, so we don’t know with
certainty what the results of such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
The FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on the FDA and
other health agencies for safety questions about wireless phones.
The FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF exposures
that people get from these base stations are typically thousands of
times lower than those they can get from wireless phones. Base
stations are thus not the subject of the safety questions discussed
in this document.
88
89
Safety Guidelines
Safety Guidelines
possible association between the use of wireless phones and
The FDA has been a leading participant in the World Health
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term exposures,
since the average period of phone use in these studies was
around three years.
Organization International Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The project has also helped develop a series of
public information documents on EMF issues.
The FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless
phone safety. The FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through
contracts with independent investigators. The initial research will
include both laboratory studies and studies of wireless phone
users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest research
developments around the world.
5.What research is needed to decide whether RF
exposure from wireless phones poses a health
risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the
data that are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large numbers of animals
would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that
is directly applicable to human populations, but 10 or more years
follow-up may be needed to provide answers about some health
effects, such as cancer. This is because the interval between the
time of exposure to a cancer-causing agent and the time tumors
develop — if they do — may be many, many years. The
7.How can I find out how much radio frequency
energy exposure I can get by using my
wireless phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radio
frequency energy (RF) exposures. The FCC established these
guidelines in consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF exposure from
wireless telephones is set at a Specific Absorption Rate (SAR) of
1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with
the safety standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure limit takes
into consideration the body’s ability to remove heat from the
tissues that absorb energy from the wireless phone and is set
well below levels known to have effects. Manufacturers of
wireless phones must report the RF exposure level for each
interpretation of epidemiological studies is hampered by difficulties
in measuring actual RF exposure during day-to-day use of wireless
phones. Many factors affect this measurement, such as the angle
at which the phone is held, or which model of phone is used.
6.What is the FDA doing to find out more about
the possible health effects of wireless phone
RF?
The FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radiofrequency energy
(RF).
90
91
Safety Guidelines
Safety Guidelines
model of phone to the FCC. The FCC website
wireless phone will reduce RF exposure.
FCC identification number on your phone so you can find your
phone’s RF exposure level in the online listing.
If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a headset
and carry the wireless phone away from your body or use a
wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless
phone use.
8.What has the FDA done to measure the radio
frequency energy coming from wireless
phones?
The Institute of Electrical and Electronic Engineers (IEEE) is
developing a technical standard for measuring the radio
frequency energy (RF) exposure from wireless phones and other
wireless handsets with the participation and leadership of FDA
scientists and engineers. The standard, ‘Recommended Practice
for Determining the Spatial-Peak Specific Absorption Rate (SAR)
in the Human Body Due to Wireless Communications Devices:
Experimental Techniques,’ sets forth the first consistent test
methodology for measuring the rate at which RF is deposited in
the heads of wireless phone users. The test method uses a
tissue-simulating model of the human head. Standardized SAR
test methodology is expected to greatly improve the consistency
of measurements made at different laboratories on the same
phone. SAR is the measurement of the amount of energy
absorbed in tissue, either by the whole body or a small part of the
body. It is measured in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether a wireless phone
complies with safety guidelines.
10.What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want
to take steps to lower exposure to radiofrequency energy (RF),
the measures described above would apply to children and
teenagers using wireless phones. Reducing the time of
wireless phone use and increasing the distance between the
user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless
phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard
exists.
9.What steps can I take to reduce my exposure
to radiofrequency energy from my wireless
phone?
If there is a risk from these products — and at this point we do
not know that there is — it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
11.What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, the FDA helped
develop a detailed test method to measure electromagnetic
92
93
Safety Guidelines
Safety Guidelines
interference (EMI) of implanted cardiac pacemakers and
Consumer Information on SAR
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final
draft, a joint effort by the FDA, medical device manufacturers,
and many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone
EMI.
The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic
Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless
phones so that no interference occurs when a person uses a
‘compatible’ phone and a ‘compatible’ hearing aid at the same
time. This standard was approved by the IEEE in 2000.
The FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, the FDA will conduct
testing to assess the interference and work to resolve the
problem.
(Specific Absorption Rate)
This Model Phone Meets the Government’s
Requirements for Exposure to Radio Waves.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. Government.
These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are
conducted using standard operating positions specified by the
FCC with the phone transmitting at its highest certified power level
in all tested frequency bands. Although SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. Because
the phone is designed to operate at multiple power levels to use
only the power required to reach the network, in general, the closer
you are to a wireless base station antenna, the lower the power
output.
12.Where can I find additional information?
For additional information, please refer to the following
resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
Federal Communications Commission (FCC) RF Safety
Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each
model. The highest SAR value for this model phone when tested for
use at the ear is 0.714 W/kg and when worn on the body, as
94
95
Safety Guidelines
Glossary
described in this user’s manual, is 0.482 W/kg. (Body-worn
To help you understand the main technical terms and abbreviations
used in this booklet and take full advantage of the feature on your
mobile phone, here are a few definitions.
measurements differ among phone models, depending upon
available accessories and FCC requirements.) While there may be
differences between SAR levels of various phones and at various
positions, they all meet the government requirement for safe
exposure.
Call Barring
Ability to restrict outgoing and incoming calls.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF emission guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
FCC ID BEJG4010.
Call Forwarding
Ability to reroute calls to another number.
Call waiting
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association
Ability to inform users that they have an incoming call when
engaged on another call.
GPRS (General Packet Radio Service)
*In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in measurements.
GPRS guaranties continuous connection to the Internet for mobile
phone and computer users. It is based on the Global System for
Mobile Communication(GSM) circuit-switched cellular phone
connections and the Short Message Service(SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular communication, guaranteeing
compatibility between the various network operators. GSM covers
most European countries and many other parts of the world.
Caller ID
Service allowing subscribers to view or block the telephone
numbers of callers.
96
97
Glossary
Index
Call cost’s limit
Call forwarding
Call durations
Call register
50
55,97
48
A
Multiparty Calls
Access codes
Accessories
Active flip
22
81
Ability to establish a conference call involving up to five additional
parties.
47
14,15
31,45,66
67
Phone Password
Call waiting
31,56,97
59
Add new
Security code used to unlock the phone when you have selected
the option to lock it automatically each time it switches on.
Cancel all barrings
Change password
Check memory
Clear cache
Add member
Adjusting the volume
Alarm clock
All calls
59
25
46,69
77
52
Roaming
48
Use of your phone when you are outside your home area (when
traveling for example).
Closed user group
Conference calls
Contrast
57
All calls’ cost
Answering a call
Answer mode
Auto display
Auto redial
49
32
25
54
SDN (Service Dial Number)
56
Copy all
67
44,50
57
Telephone numbers supplied by your network provider and giving
access to special services, such as voice mail, directory inquiries,
customer support and emergency services.
CPHS
35,36
D
B
Backlight
SIM (Subscriber Identification Module)
Delete recent calls
Delivery reports
Dialed calls
48
42
54
23
Card containing a chip with all the information required to operate
the phone (network and memory information, as well as the
subscriber's personal data). The SIM card fits into a small slot on
the back of the phone and is protected by the battery.
Barring password
Battery
48
13,16,81
42
Display screen
Display information
14,15
17
Bearer setting
Bookmarks
75
SMS (Short Message Service)
E
End key
Network service sending and receiving messages to and from
another subscriber without having to speak to the correspondent.
The message created or received (up to 160 characters long) can
be displayed, received, edited or sent.
C
14,15
24
Cache check
Calculator
Calendar
77
72
62
67
58
49
Ending a call
Entering text
26
Caller groups
Call barring service
Call costs
98
99
Index
Index
Making international calls
Manner Mode
Menu tree
24
26
F
R
V
FDN
59
59
Received Calls
47
Valid period
42
51,79
63
Fixed dial number
35
Vibrate
Flip open
25,56
S
Memo
64
View all schedules
Search
65
22
Member list
67
Voice mailbox number
Voice messages
43
G
Game
Security code
Send
Message key
Message types
Microphone
14,15
42
43
70
51,79,97
75
14,15
56
General
Go to URL
GPRS
Send my number
Set memory
Service dial number
Schedule
14,15
57
W
Wallpaper
68
Minute minder
Missed calls
Mute off
54
74,75
77
17,42,97
67
69,98
62
47
WAP browser
WAP information
World time
Write message
Group icon
Group ring tone
32
67
Scheduler tone
Side keys
63
Mute on
32
73
14,15
26
Muting the microphone
Multiparty calls
32
39
H
Headset
Signal strength
Silent
32,98
17,51,82
51,79
67
SIM to phone
Speed dials
N
I
66
Name card
Navigation Key
Network settings
O
40,46
14,15
60
Inbox
In-call menu
39,40,44,76
31
T
Internet
74
Templates
Text messages
Text template
Time format
Travel adapter
45
39
Outbox
41
69
L
Own number
40
Languages
40,45,55
53
Last call
48
49
29
P
8,81
Last call’s cost
Lower case
Phonebook
Phone to SIM
Power key
Private call
65
67
U
Unit converter
72
29
14,15
33
M
Upper case
Making a Call
24
100
101
P/N: MMBB0112601 (1.0)
DATE: 2003.11.18
|