TABLE OF CONTENTS
CHAPTER 1. GETTING STARTED
INSTALLING THE BATTERY...............................................................................................................................8
REMOVING THE BATTERY ...............................................................................................................................9
CHARGING THE BATTERY..............................................................................................................................10
POWER CONNECTION........................................................................................................................................................10
BLOCKING ANTENNA WHILE MAKING A CALL .............................................................................................11
CORRECT/INCORRECT FINGER POSITION ..........................................................................................................................11
ACTIVATING YOUR VIRGIN MOBILE ACCOUNT.............................................................................................12
FINDING YOUR PHONE’S SERIAL NUMBER...................................................................................................13
PROGRAMMING YOUR PHONE.....................................................................................................................14
GETTING TO KNOW YOUR PHONE ................................................................................................................15
TURNING THE PHONE ON ..................................................................................................................................................19
TURNING THE PHONE OFF .................................................................................................................................................19
MY PHONE NUMBER .........................................................................................................................................................20
TTY.....................................................................................................................................................................................20
PHONE INFO ......................................................................................................................................................................21
NAVIGATING THROUGH MENUS...................................................................................................................23
CHAPTER 2. MY ACCOUNT
MY ACCOUNT ...............................................................................................................................................28
TOP-UP WITH A TOP-UP CARD ...........................................................................................................................................28
TOP-UP WITH A DEBIT CARD, CREDIT CARD, OR PAYPAL ACCOUNT ..................................................................................29
CHAPTER 3. MAKING AND RECEIVING CALLS
MAKING AND RECEIVING CALLS..................................................................................................................32
MAKING A CALL ................................................................................................................................................................32
ANSWERING CALLS............................................................................................................................................................32
SPEAKERPHONE.................................................................................................................................................................33
HARD/ 2 SECOND PAUSE FEATURE....................................................................................................................................33
CALLER ID FUNCTION........................................................................................................................................................33
CALL WAITING FUNCTION.................................................................................................................................................34
ADJUSTING VOLUME..........................................................................................................................................................34
SPEED DIALING..................................................................................................................................................................34
RECENT CALLS LIST-RECENT CALLS...................................................................................................................................35
RECENT CALLS LIST-INCOMING CALLS..............................................................................................................................36
1
TABLE OF CONTENTS
VIRGIN ALERTS...................................................................................................................................................................61
SENT ..................................................................................................................................................................................62
SAVED................................................................................................................................................................................62
VOICEMAIL.........................................................................................................................................................................63
ERASE MSGS......................................................................................................................................................................63
MSG SETTINGS ..................................................................................................................................................................64
CHAPTER 7. MY STUFF
MY STUFF .....................................................................................................................................................70
MY RINGTONES .................................................................................................................................................................70
MY GRAPHICS....................................................................................................................................................................70
MY GAMES ........................................................................................................................................................................71
MY OTHER STUFF...............................................................................................................................................................72
MY SOUNDS ......................................................................................................................................................................72
CHAPTER 8. VIRGINXL
VIRGINXL......................................................................................................................................................74
CHAPTER 9. PICTURES
PICTURES......................................................................................................................................................76
TAKE A PICTURE.................................................................................................................................................................76
SEND A PICTURE MESSAGE ...............................................................................................................................................77
MY PICTURES.....................................................................................................................................................................77
CAMERA SETTINGS............................................................................................................................................................78
HELP ..................................................................................................................................................................................79
CHAPTER 10. CUSTOMIZING YOUR PHONE
CUSTOMIZING YOUR PHONE........................................................................................................................82
SOUND...............................................................................................................................................................................82
DISPLAY .............................................................................................................................................................................93
MESSAGING.......................................................................................................................................................................97
BLUETOOTH .....................................................................................................................................................................100
SECURITY.........................................................................................................................................................................103
LOCATION........................................................................................................................................................................108
CALL SETTINGS................................................................................................................................................................109
OTHERS............................................................................................................................................................................110
3
TABLE OF CONTENTS
CHAPTER 11. USING TOOLS
USING TOOLS..............................................................................................................................................116
VOICE...............................................................................................................................................................................116
TIP CALCULATOR..............................................................................................................................................................117
CALCULATOR ...................................................................................................................................................................118
ALARM CLOCK.................................................................................................................................................................118
SCHEDULER .....................................................................................................................................................................119
MEMO PAD......................................................................................................................................................................120
STOPWATCH ....................................................................................................................................................................120
WORLD CLOCK.................................................................................................................................................................121
MEMORY MANAGER .......................................................................................................................................................121
CHAPTER 12. WARRANTY
WARRANTY.................................................................................................................................................124
MANUFACTURER’S WARRANTY.......................................................................................................................................124
CHAPTER 13. SAFETY
SAFETY........................................................................................................................................................128
SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES...........................................................................................128
SAFETY INFORMATION FOR FCC RF EXPOSURE ..............................................................................................................130
SAR INFORMATION..........................................................................................................................................................131
FDA CONSUMER UPDATE ................................................................................................................................................132
EMERGENCY CALLS....................................................................................................................................................... 138
COMPLIANCE WITH OTHER FCC REGULATIONS...............................................................................................................139
GENERAL SAFETY ............................................................................................................................................................140
ANTENNA.........................................................................................................................................................................140
BATTERY ..........................................................................................................................................................................141
ADAPTER/CHARGER.........................................................................................................................................................142
RECYCLE YOUR CELL PHONE!..........................................................................................................................................143
FCC HEARING-AID COMPATIBILITY (HAC) REGULATIONS FOR WIRELESS DEVICES.........................................................144
FCC COMPLIANCE INFORMATION...................................................................................................................................146
4
NAVIGATING THROUGH CHAPTER
CHAPTER
INFORMATION
1. GETTING STARTED
This chapter provides important information about using your phone including:
•
•
•
•
•
•
•
•
Installing the Battery
Charging the Battery
Activating Your Virgin Mobile Account
Finding your Serial Number
Programming Your Phone
Getting to Know Your Phone
Navigating through Menus
Caring for the Battery
2. MY ACCOUNT
Manage your Virgin Mobile account directly from your phone.
3. MAKING AND
RECEIVING CALLS
Phone's basic functions including menus, volume levels, and call features.
•
•
Making and Receiving Calls
During a Call
4. ENTERING LETTERS,
NUMBERS, SYMBOLS
This chapter provides entering letters, numbers, symbols.
5. STORING CONTACTS
Numerous functions including saving phone numbers to the internal
phonebook.
6. MESSAGING
7. MY STUFF
8. VIRGINXL
9. PICTURES
Checking voice mail messages, as well as sending and receiving message.
Access ringtones, games, graphics and sounds.
Download games, ringtones, graphics and applications.
Take a picture and send picture message.
10. CUSTOMIZING YOUR
PHONE
Customizes your cellular telephone and optimizes performance through a
variety of settings.
11. USING TOOLS
This section shows you how to use features that can help you keep up with your
contacts, schedules and appointments.
5
NAVIGATING THROUGH CHAPTER
12. WARRANTY
13. SAFETY
This chapter contains the terms and conditions of services and the warranty for
your cellular telephone.
Read this important safety information before using your phone.
6
CHAPTER 1 GETTING STARTED
CHAPTER 1
GETTING STARTED
This chapter provides important information about
using your phone including:
Installing the Battery
Remove the Battery
Charging the Battery
Activating Your Virgin Mobile Account
Finding your Serial Number
Programming Your Phone
Getting to Know Your Phone
Navigating through Menus
Caring for the Battery
7
INSTALLING THE BATTERY
1. Place the battery (label side up) on the back of the phone so the metal contacts match up on
the battery and in the battery cavity.
2. Push the battery down into the battery cavity until it locks into place.
3. Place the battery cover over the battery and snap it into place.
8
REMOVING THE BATTERY
1. Make sure your phone is turned off.
2. Hold the phone face down.
3. Push up on the latch on the back of the phone and pull the back cover off.
4. If necessary, remove the battery by pulling up on the bottom edge of the battery.
Battery
Talk Time
Standby Time
900 mAh Lithium Ion
Up to 270 min
Up to 230 hours
9
CHARGING THE BATTERY
POWER CONNECTION
1. Plug the AC Charger into a standard outlet.
2. Plug the other end of the AC Charger into your phone. Make sure the battery is securely in
place.
• When you charge the battery with the phone power off, you will see a charging status screen.
You cannot operate the phone until it is powered on.
• The battery is not charged at the time of purchase.
Tip
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace the battery.
10
BLOCKING ANTENNA WHILE MAKING A CALL
CORRECT/INCORRECT FINGER POSITION
INCORRECT FINGER POSITION
CORRECT FINGER POSITION
11
ACTIVATING YOUR VIRGIN MOBILE ACCOUNT
Before you can start talking, messaging, or downloading, you need to activate service with Virgin
Mobile. You need your phone’s serial number to activate your Virgin Mobile account. (Please see
next page on how to find your serial #) Activate your account online by going to
www.virginmobileusa.com and clicking on Activate. Or call Virgin Mobile at 1-888-322-1122.
12
FINDING YOUR PHONE’S SERIAL NUMBER
1. Press
[Menu], then press
"Settings". Press
"Handset info".
2. Press
"My mobile number".
3. The serial number is under the letters MEID. It has 18 digits.
13
PROGRAMMING YOUR PHONE
Once your account is active, you’ll receive your Virgin Mobile phone number. When you are ready,
follow these steps to program it into your phone:
1. Turn on your phone and wait for it to power up.
2. Dial ##VIRGIN# (that’s #-#-8-4-7-4-4-6-#)
3. You are now in the Programming menu. Scroll down to “Activate Phone” and hit “OK".
4. Your screen will say, “Do you want to activate your phone now ?” Select “Yes”.
5. Your phone will connect to the network, and then the screen will say "Hi. Press Start to
continue the activation process". Scroll down to "Start" and hit "OK".
6. Your phone will say "We're getting your phone number for you," then your phone will display
your new Virgin Mobile phone number. Write it down.
7. Scroll down to "Finish" and hit "OK" to complete the activation process. Your phone will turn
off and back on by itself.
• That’s it – It might take a couple of hours to get you set up on our network, but we’ll send a text
message to your phone to let you know you can start talking. Also, it may take up to 4
hours for VirginXL, voicemail, and Top-Up features to come online. But we bet you’ll find
us worth the wait. Enjoy!
14
GETTING TO KNOW YOUR PHONE
Your Super Slice phone weighs 2.5 ounces. The dimensions are 4.4” X 1.9” X .4”.
Earpiece
Color Display
Right Option Button
Left Option Button
SEND Key
Back Key
Navigation and OK Key
END/POWER Key
Microphone
Camera
Charging port
Earjack
Volume Keys
15
GETTING TO KNOW YOUR PHONE
NAVIGATION KEY
In Idle Mode : Press
for My Account,
for Send Text Msg,
for Recent Calls and
for Virgin XL.
Within a Menu : Within a menu, use to scroll through menu options, or to select a function displayed on the
screen.
On a Call : Press
to activate speakerphone mode.
Send Key
Press to make or receive a call or in idle mode, press to access the Recent Calls list.
End Key
Press to terminate a call or to return to idle mode. Press and hold to turn the phone on/off.
Left Option Button
Press to access the menu or function displayed at the bottom left of the screen.
Right Option Button
Press to access the menu or function displayed at the bottom right of the screen.
BACK Key
Press to clear a digit or press and hold to clear all digits from the display. Press to return to the previous page.
Shift Key
Enters the asterisk [ ] character for calling features. Press and hold to enter Keyguard mode.
*
Space Key
In text entry mode, press to accept the word and add a space.
0 Key
In T9 Mode, press to see other word choices.
1 Key
Press and hold to access voicemail.
OK Key
Press to access the Menu.
Side Volume Key
Allows you to adjust the ringtone volume in standby mode or adjust the voice volume during a call.
The volume key can also be used to scroll up or down to navigate through the different menu options.
Press to ignore an incoming call and mute the ringtone.
16
GETTING TO KNOW YOUR PHONE
The idle mode display appears when you are not on a call or using the menu. You must be in the
idle mode display to dial a phone number.
Display Indicators
Display various icons.
Text & Graphic area
Option Button Indicators
Shows the functions currently assigned to each Option Button and displays some icons.
Signal Strength
Current signal strength: the more lines, the stronger the signal.
Emergency Call
Blinks when an emergency call is in progress.
Download
Downloading is in progress.
GPS Icon
Indicates the Location Service of your phone is disabled/enabled.
No Service
Indicates the phone cannot receive a signal from the system.
TTY
Indicates your phone is in TTY mode.
Battery
Battery charging level — the more bars, the fuller the charge.
Alarm
Appears when either a calendar or an alarm is set.
17
GETTING TO KNOW YOUR PHONE
Off
Indicates the ringtone volume is set to off.
Vibrate+Bell Mode
Phone will vibrate and ring to notify you of an incoming call.
Vibrate Only
Phone will vibrate to notify you of an incoming call.
Silence All
All sounds, including ringtone volume, are set to off.
Voicemail
Indicates you have voicemail messages.
New Text Messages
Indicates you have text messages.
New Voice Messages
Indicates you have both text and voicemail messages.
Lock
Phone is locked.
Charging
Your battery is charging.
18
GETTING TO KNOW YOUR PHONE
TURNING THE PHONE ON
1. Press and hold
until the phone powers on.
• If “Password” appears on the display enter your 4-digit password to unlock your phone.
• The default password is the last 4 digits of your phone number.
Tip
TURNING THE PHONE OFF
1. Press and hold
until the phone powers off.
• Immediately change or recharge the battery when “LOW BATTERY!! PHONE IS TURNING OFF!”
appears on thedisplay. Memory may possibly be damaged if the phone turns offdue to the
Tip
battery completely draining.
• Turn the phone off before removing or replacing the battery. If the phone is on, unsaved data
may be lost.
Each function can be accessed by scrolling with
with the menu item.
or by pressing the number that corresponds
1. To access the menu in the idle mode, press
[Menu].
2. Press
3. To return to the previous page, press
To exit the current menu and return to the idle mode, press
to enter a function when its main page is displayed or press its assigned number to
have direct access to the function.
/
/
/
to scroll through the 8 menu items.
.
.
4. Press
19
GETTING TO KNOW YOUR PHONE
My Account
Send Text Msg
VirginXL
Recent Calls
MY PHONE NUMBER
Displays your phone number.
1. Press
[Menu], then press
"Contacts".
2. Press
"My phone number". Your phone number will be displayed.
TTY
Your phone is able to operate with a TTY(Teletypewriter) device. This feature is system dependent
and may not be available in all areas.
1. Press
[Menu], then press
“Others”, then press
"Settings".
"TTY".
Press
• Enabling TTY may impair headset use and non- TTY accessory performance.
2. Press
[Next]. Select “On” or “Off.”, then press
[Select] to save the setting.
20
GETTING TO KNOW YOUR PHONE
PHONE INFO
Displays your phone’s information:
MY MOBILE NUMBER
Displays your phone number and MEID(Serial Number).
1. Press
[Menu], then press
“Handset info”, then press
"Settings".
Press
“My mobile number”.
2. Your phone number and MEID(Serial Number) is displayed.
VERSION
Displays your phone's software versions.
1. Press
[Menu], then press
“Handset info”, then press
"Settings".
"Version".
Press
2. Your phone's software version are displayed.
ICON GLOSSARY
Displays some of the indicator icons of your phone.
1. Press
[Menu], then press
“Handset info”, then press
"Settings".
"Icon glossary".
Press
2. Your phone's indicator icons are displayed.
21
GETTING TO KNOW YOUR PHONE
ADVANCED
Displays your phone's SID, Channel, Technology and Frequency information.
1. Press
[Menu], then press
“Handset info”, then press
"Settings".
"Advanced".
Press
2. Your phone's SID, Channel, Technology and Frequency information is displayed.
22
NAVIGATING THROUGH MENUS
3. Send email msg
4. Send im
5. Inbox
6. Virgin alerts
7. Voicemail
8. Saved
MY STUFF
1. My ringtones
2. My graphics
3. My games
4. My other stuff
5. My sounds
9. Sent
10. Erase msgs
MYACCOUNT
10.1. inbox
10.2. sent
10.3. saved
PICTURES
1. Take a picture
2. Send pic msg
3. My pictures
4. Settings
11. Msg settings
11.1. Sound
11.1.1. Text message
11.1.2. Picture message
11.1.3. Voicemail
11.2. Reminder
11.3. Auto text
11.4. Text entry
11.5. Group
11.6. Signature
11.7. Save to sent folder
11.8. Auto erase
11.9. Notification
4.1. Resolution
4.2. Quality
4.3. Shutter sound
5. Help
5.1. Resolution
5.2. Quality
5.3. Picture message
CONTACTS
1. Find name
2. Add new
3. Group settings
4. Speed dial
5. My Phone number
TOOLS
1. Voice
1.1. Voice memo
1.2. Voice command
2. Tip Calculator
3. Calculator
4. Alarm clock
VirginXL
MESSAGING
1. Send Text msg
2. Send Pic msg
23
NAVIGATING THROUGH MENUS
5. Scheduler
6. Memo pad
7. Stopwatch
8. World clock
9. Memory manager
1.3.3. Service tone
1.3.4. Fade tone
1.4. Tone length
2.Display
2.1. Graphics
2.1.1. Wallpaper
2.1.1.1. My graphics
RECENT CALLS
1. Recent calls
2. Incoming calls
3. Outgoing calls
4. Missed calls
5. Call timer
2.1.1.2. My pictures
2.1.2. Clock and calendar
2.1.3. Screensaver
2.2. Incoming calls
2.2.1. My graphics
2.2.2. My pictures
2.3. Menu style
2.4. Greeting
2.5. Backlight
SETTINGS
1. Sound
1.1. Ringer type
1.1.1. With caller id
1.1.2. No caller id
1.2. Volume
2.5.1. Display
2.5.2. Keypad
3. Messaging
3.1. Sound
1.2.1. Ringer
1.2.2. Receiver
1.2.3. Speakerphone
1.2.4. Headset
1.2.5. Key tone
1.2.6. Applications
1.2.7. Others
3.1.1. Text messaging
3.1.2. Picture messaging
3.1.3. Voicemail
3.2. Reminder
3.3. Auto text
3.4. Text entry
3.5. Group
3.6. Signature
3.7. Save to sent folder
3.8. Auto erase
3.9. Notification
1.2.7.1. Messaging
1.2.7.2. Voicemail
1.2.7.3. Alarms & scheduler
1.2.7.4 Power on/off
1.3. Alerts
1.3.1. Minute minder
1.3.2. Connect tone
4. Bluetooth
24
NAVIGATING THROUGH MENUS
4.1. My device
4.2. Settings
4.3. Support service
4.4. Information
9. Handset info
9.1. My mobile number
9.2. Version
9.3. Icon glossary
9.4. Advanced
5. Security
5.1. Handset lock
5.2. Key lock
5.3. Special number
5.4. Change lock code
5.5. Erase data
5.6. Reset browser
5.7. Default settings
5.8. Reset handset
6. Location
7. Call settings
7.1. Answer mode
7.2. Auto answer
8. Others
8.1. TTY
8.2. Abbrev. dial
8.3. Contacts match
8.4. Typing mode
8.4.1. Auto-capital
8.4.2. Auto-space
8.4.3. My words
8.4.4. T9 settings
8.4.5. Help
8.5. Voice Commands
8.5.1. Voice recognition results
8.5.2. Voice Calibration
8.5.3. Prompts
8.5.4. Number format
25
MEMO
26
CHAPTER 2 MY ACCOUNT
CHAPTER 2
MY ACCOUNT
27
MY ACCOUNT
When you balance is low, you can Top-Up your account from your phone:
TOP-UP WITH A TOP-UP CARD
1. Press
2. From the idle screen, press the Up navigation key or from the main menu, scroll to My Account
and press
[Menu] to select “Menu”.
.
3. Scroll down and select the “Top-Up” link and press
.
• You can tell it’s selected because it’s highlighted.
4. Top-Up Card is highlighted so press
5. Enter your account PIN (vKey) and press
6. Scroll down to select “Login” and press
.
.
.
7. Enter your Top-Up card’s PIN number and press
.
8. Scroll down to select “Top-Up Now” and press
.
9. At the confirmation screen, select “Yes” by pressing
10. At the “Approved” screen scroll to OK and press the
.
.
11. Press
to exit.
28
MY ACCOUNT
TOP-UP WITH A DEBIT CARD, CREDIT CARD, OR PAYPAL
ACCOUNT
Before you can Top-Up from your phone with a debit card, credit card, or Paypal account, you need
to register the card or Paypal account at www.virginmobileusa.com.
1. Press
2. From the idle screen, press the Up navigation key or from the main menu, scroll to My Account
and press
[Menu] to select “Menu”.
.
3. Scroll down and select the “Top-Up” link and press
.
• You can tell it’s selected because it’s highlighted.
4. Scroll down and select “Credit Card” and press
.
5. Enter your account PIN (vKey) and press
6. Scroll down to select “Login” and press
7. Enter the amount for Top-Up and press
.
.
.
8. Scroll down to select “Top-Up Now” and press
9. Your handset will validate the amount you want to Top-Up. Scroll down to select “Yes” and
press
10. That’s it. Your phone will announce that “You’re Topped-Up.” Press
to exit.
.
.
.
11. Press
29
MEMO
30
CHAPTER 3 MAKING AND RECEIVING CALLS
CHAPTER 3
MAKING AND
RECEIVING CALLS
MAKING AND RECEIVING CALLS
DURING A CALL
31
MAKING AND RECEIVING CALLS
MAKING A CALL
1. Enter a phone number.
To modify the phone number you have entered :
• To erase one digit at a time, press
Tip
.
• To erase the entire number, press and hold
.
2. Press
.
• If “CALL FAILED” appears on the display or the line is busy, press
• If you activate the AUTO RETRY function, the phone will automatically retry for the number
of times you have selected.
• If “Enter lock code” appears on the display enter your 4-digit password to unlock your phone.
or
.
Tip
"
"
3. To end a call, press
.
ANSWERING CALLS
1. When your phone rings or vibrates, press
to answer the incoming call. (Depending on
your phone’s settings, you may also answer incoming calls by pressing any number key.)
• To ignore incoming calls, press
[Ignore].
2. To end a call, press
.
32
MAKING AND RECEIVING CALLS
SPEAKERPHONE
The speakerphone feature lets you hear audio through the speaker and talk without holding the
phone.
1. To activate the speakerphone while on a call, press
.
2. The phone returns to normal (Speakerphone Off) after ending a call or when the phone is
turned off and back on.
HARD/ 2 SECOND PAUSE FEATURE
Pauses are used for automated systems (i.e., voicemail, calling cards). Insert a pause after a phone
number then enter another group of numbers. The second set of numbers is dialed automatically
after the pause. This feature is useful for dialing into systems that require a code.
1. To insert a Hard Pause/2-second Pause, enter a phone number then press
Select either a P Hard pause ("P" appears) or a T 2-second pause ("T" appears).
to dial or press [options] and select “Save” to save phone number.
[Options].
2. Press
CALLER ID FUNCTION
Identifies caller by displaying their phone number. If the caller’s name and number are already
stored in your phone book, caller’s name with the number will appear.
33
MAKING AND RECEIVING CALLS
CALL WAITING FUNCTION
Notifies you of an incoming call when you are already on a call by playing a beep tone and
displaying the caller’s phone number.
1. To answer another call while on the phone, press
.
This places the first call on hold. To switch back to the first caller, press
again.
• Call waiting is a system dependent feature. Please contact your service provider for details.
Tip
ADJUSTING VOLUME
To adjust the ringtone volume:
1. In idle mode, press up or down. Choose from Silence All, Vibrate All, Ringer off, or Level
1~5. You can also choose to have the phone vibrate as well when the phone rings.
Press
to check the box on/off for Vibrate.
2. Press
[Save] to save the setting.
SPEED DIALING
Ideal for frequently dialed numbers, this feature allows entries in your contact list to be dialed via
the keypad with only one or two key presses.
ONE DIGIT SPEED DIALING
2-9 : Press and hold the corresponding memory number for more than 1 second.
34
MAKING AND RECEIVING CALLS
TWO DIGIT SPEED DIALING
10-99 : Press and release the first digit, then press and hold the second digit for more than 1 second.
• Location 1 is reserved for voicemail. Locations 2-99 are unassigned. To assign a speed dial
location, please see page 53.
Tip
RECENT CALLS LIST-RECENT CALLS
Displays information about the 75 most recent incoming, outgoing or missed calls.
1. To access the “Recent Calls List,” press the
Select “Recent Calls”.
2. To view call details, press
or press
[Menu], then “Recent Calls”.
.
• Call details include date, time, and phone number.
Tip
3. Press
[Options] to access “Send txt msg”, “Save”, “Prepend”, “Erase”, or “Erase all”.
[Send msg] to send a text message.
Or, press
• After 75 incoming, outgoing or missed calls, the oldest call will automatically be erased from
the history.
Tip
• Send txt msg: Send a text message to the contact.
• Save: Save the phone number in your phonebook.
• Prepend: Adds numbers to the beginning of the phone number.
• Erase: To erase the call entry.
• Erase All: To erase all entire all calls list.
35
MAKING AND RECEIVING CALLS
RECENT CALLS LIST-INCOMING CALLS
Displays information about the last 25 entries in the Incoming Call list. Place a call to a selected
number by pressing
1. To access the “Recent Calls List,” press the
Select “Incoming Calls”.
2. To view incoming call details, press
[Options] to access 'Save”, “Prepend”, “Erase”, or “Erase all”. Select
.
or press
[Menu], then “Recent Calls”.
.
3. Press
[Send msg] to send a text msg or picture msg.
• Save: Save the phone number in your phonebook.
• Prepend: Adds numbers to the beginning of the phone number.
• Erase: To erase an incoming call entry.
• Erase all: To erase all entire Incoming Calls.
36
MAKING AND RECEIVING CALLS
RECENT CALLS LIST-OUTGOING CALLS
Displays information about the last 25 entries in the Outgoing Calls list. Place a call to a selected
number by pressing
1. To access the “Recent Calls List,” press the
Select “Outgoing Calls”.
2. To view outgoing call details, press
.
or press
[Menu], then “Recent Calls”.
.
• Call details include date, time and phone number.
Tip
3. Press
[Options] to access 'Save”, “Prepend”, “Erase”, or “Erase all”. Select
[Send msg] to send a text msg or picture msg.
• Save: Save the phone number in your phonebook.
• Prepend: Adds numbers to the beginning of the phone number.
• Erase: To erase the Outgoing Call entry.
• Erase all: To erase all the entire Outgoing Call list.
37
MAKING AND RECEIVING CALLS
RECENT CALLS LIST-MISSED CALLS
Displays information about the last 25 entries in the Missed Cal list. Place a call to a selected
number by pressing
1. To access the “Recent Calls List,” press the
Select “Missed Calls”.
2. To view missed call details, press
[Options] to access 'Save”, “Prepend”, “Erase”, or “Erase all”. Select
.
or press
[Menu], then “Recent Calls”.
.
3. Press
[Send msg] to send a text msg or picture msg.
• Save: Save the phone number in your phonebook.
• Prepend: Adds numbers to the beginning of the phone number.
• Erase: To erase a Missed Call entry.
• Erase all: To erase all the entire Missed Calls list.
CALL TIMER
Check the talk time and manages your calls within the limit you set. The four call timers include:
Last call, All calls, Incoming calls, and Outgoing calls.
1. To access the “Recent Calls List,” press the
or press
[Menu], then “Recent Calls”.
Select
“Call Timer”.
2. Press
/
to view the different timers.
[Reset All] to Reset all call timers.
Press
3. To return to the previous page, press
.
38
MAKING AND RECEIVING CALLS
911 FEATURE
The 911 feature puts the phone in the Emergency Call Mode when you dial the preprogrammed
emergency number, 911. It also operates in the Lock Mode and out of the service area.
911 IN LOCK MODE
The 911 call service is available even in the Lock Mode.
1. Enter "911", then press
.
2. The call connects.
3. When the call ends, the phone returns to Lock Mode.
• The 911 call is not recorded in the Recent Call list.
Tip
911 USING ANY AVAILABLE SYSTEM
1. Enter "911", then press
.
2. The call connects.
3. The phone maintains the Emergency Mode and the phone can receive an incoming call from
any available system. However, it can’t make a call.
39
DURING A CALL
MUTE
The caller cannot hear you or any sounds from your side but you can still hear him/her.
1. Press
[Mute].
• To deactivate, press
[Unmute].
• The phone will automatically unmute in Emergency Call or Callback mode.
CALL HISTORY
Displays call information:
1. Press
[Options], then press
.
FIND NAME
To select the phone number in your internal Contact List:
1. Press
[Options], then press
.
MESSAGING
To send a text message during a call:
1. Press
[Options], then press
.
40
DURING A CALL
BLUETOOTH
Connect to a Bluetooth-enabled device, such as a wireless headset (sold separately):
[Options], then press
1. Press
.
41
MEMO
42
CHAPTER 4 ENTERING LETTERS, NUMBERS, SYMBOLS
CHAPTER 4
ENTERING
LETTERS,
NUMBERS,
SYMBOLS
43
ENTERING LETTERS, NUMBERS, SYMBOLS
You can enter letters, numbers, and symbols using several entry modes: Alphabet, Number, T9,
Symbol, Auto Text, and Emoticon. Not all options are available for every text entry screen.
An indicator for the current entry mode will appear in the middle of the bottom row on the display
when you are entering letters and numbers. To select an entry mode, press the
choose from the list on screen.
[Options], then
ALPHABET INPUT MODE
Use the number keys to enter letters, numbers and symbols. Select Alphabet mode by pressing
[Options], then select Alphabet. The Alphabet mode icon [ABC] will appear in the middle of the
bottom of your screen.
1. Find the key that corresponds to the letter you want to enter. Press it as many times as needed
for the letter to appear on the screen.
2. To enter a space, press
3. To delete one digit, press
. The cursor will automatically move to the next column.
. To delete all letters, press and hold
.
Select Alphabet mode by pressing
[Options], then select "Alphabet".
Tip
When you select this mode, the Alphabet icon [Abc] appears as a visual confirmation.
- Find the key that corresponds to the letter you want to enter.
- Press it as many times as needed for the letter to appear on the screen.
- To enter the name "John" in Alphabet mode:
Press [
Press [
Press [
Press [
]
J
,
,
,
,
]
]
]
o
h
n
44
ENTERING LETTERS, NUMBERS, SYMBOLS
T9 INPUT MODE
T9 mode uses a built-in dictionary to select a word based on the letters you've entered. A word can
be entered more quickly by pressing each key once per character. Instead of typing out the entire
word, scroll through the list of words provided and select the one you want.
1. To select T9 mode, press
[Options], then select T9 Words from the list.
The T9 icon [T9w] will appear in the middle of the bottom of your screen.
2. For each letter of the word you want, press the corresponding number key once. For example,
to enter the word "any", press
->
->
.
3. If the word doesn't match what you want, press
to look at other word matches.
4. When you see the word you want, press
to accept the word and enter a space.
To enter a compound word:
• Enter the first part of the word then press
Tip
to accept it without adding a space after it.
to accept the word.
• Enter the last part of the word then press
Tip
To enter
- Press
- Press
- Press
- Press
"
Sweetcakes
[Options] to select T9 Word mode.
and you will see the word "Sweet".
to keep Sweet selected and to complete the compound word entry.
and you will see "baker". Press
"
in T9 mode:
,
,
,
,
,
,
,
,
until you see
"cakes".
45
ENTERING LETTERS, NUMBERS, SYMBOLS
NUMBER MODE
Number mode allows you to enter numbers.
1. To select Number mode, press
[Options] then select Number from the list.
2. To enter a number, press the corresponding number key.
SYMBOL MODE
Symbol mode allows you to enter emoticon faces. (i.e smiley face, sad face)
1. To select Symbols mode, press
[Options] then select Symbols from the list.
2. Select the symbol you want to enter by pressing
/
/
/
. Then press
.
SMILEYS
Smileys mode allows you to enter expressions using symbols already put together.(i.e. :), :( ).
1. To select a smiley, press
[Options] then select Smileys.
2. Select the smiley from the list by pressing
/
/
/
. Then press
.
EMOTICON
Emoticon mode allows you to enter Smileys.
1. To select an emoticon, press
[Options] then select Emoticon.
2. Select the emoticon from the list by pressing
/
/
/
. Then press
.
46
ENTERING LETTERS, NUMBERS, SYMBOLS
AUTO TEXT
Preset Msg. allows you to use preloaded messages.
1. To select an Preset message, press
[Options] then select Preset Msg.
2. Highlight a message from the list and press
[Select].
47
MEMO
48
CHAPTER 5 STORING CONTACTS
CHAPTER 5
STORING
CONTACTS
49
STORING CONTACTS
1. Enter phone number, press
[Save].
2. Highlight "New Entry" or "Existing Entry". Press
If "Existing Entry" is selected, your contact list is displayed. Choose the entry to add the
number to, then press [Next]. You will then see the phone number listed above the
number type list. Select the type then press
to select.
.
• You can have up to 5 numbers of the same type for one contact entry.
3. If "New Entry" is selected, the list of phone number types will be shown appear.
Press
/
to choose the type of number you are adding. Press
to select. Enter a
name. To change the input mode, press
[Options]. Press
to enter information in other
fields for the contact. Fields include “Name”, “Mobile 1”, “Mobile 2”, “E-mail”, "IM", “URL”,
“Group”, “Ringtone”, "Vibration", "Msg Alert", “Photo”, "Secret", “Memo”.
• Group: To set a group for the contact, highlight the Group Name.(Unassigned, Personal, Family,
Business)
• Ringtone: To set a ringtone for the contact, highlight a Ringtone.
• Vibration: To set a vibration for the contact, highlight the Vibration.(Use Phone Vib, Vibration 1~6)
• Msg Alert: To set a msg alert for the contact, highlight the Msg Alert.
• Photo: To add a Photo for a contact, highlight the Photo field and press
appear. Highlight a photo and press [Select].
. The Photo screen will
• Secret: To set the contact to Secret, highlight Secret.(Lock, Unlock)
• Memo: To add a memo for a contact, highlight the memo field and press
. The Memo screen will
appear. Enter your Memo and press
[Done].
4. To store the entry in your contact list, press
[Save].
50
STORING CONTACTS
ADD NEW
Adds a new entry to your phone's contact list.
1. Press
2. Press
[Menu], then press
"Add new".
"Contacts".
3. Fill in the fields as they are selected.
Press to highlight a field, then press
/
to select it.
• Phone book fields: Name/Mobile/Email/IM/URL/Group/Ringtone/Vibration/Msg Alert/Photo/Secret/
Memo
4. To save the entry, press
[Save]. To return to the previous page, press
.
51
STORING CONTACTS
FIND NAME
Retrieves an entry by name and calls the primary number by simply pressing
.
1. Press
2. Press
[Menu], then press
"Find Name".
"Contacts".
3. The list of names in your contacts is displayed alphabetically.
4. Enter a name or scroll through the list. If more than one contact is listed, highlight the contact
you want.
5. To select the contact, highlight it and press
. The contact information is displayed.
6. To edit the contact information, press
[Edit]. The Edit Contact screen will appear with the
selected contact information shown. See page 48 for Storing a Phone Number.
7. To save the entry, press
[Save]. To return to the previous page, press
.
8. Highlight a field in the contact and press
[Options] for various functions for the fields.
9. To call the selected number, press
.
52
STORING CONTACTS
GROUP SETTINGS
Organize your contact list into groups for better management, like "Family", "Business", etc.
ADD GROUP
1. Press
2. Press
3. Press
[Menu], then press
"Group Settings".
[Add].
"Contacts".
4. Input a new group name.
5. Press
[Save] to save the setting.
CHANGE GROUP NAME
1. Press
2. Press
[Menu], then press
"Group Settings".
"Contacts".
3. Scroll to Group 1, Group 2, Group 3 or Group 4 through the list. Press
[Options], then
select “Rename” from the list.
4. Input a new group name.
5. Press
[Save] to save the setting.
53
STORING CONTACTS
RINGER
1. Press
2. Press
[Menu], then press
"Group Settings".
"Contacts".
3. Select an existing group name.
4. Press [Options], then select “Ringtone” from the list.
5. Select ringtone and press
[Select].
ERASE GROUP
1. Press
2. Press
[Menu], then press
"Group Setting".
"Contacts".
3. Select Group 1, Group 2, Group 3 or Group 4 a group.
4. Press [Options], then select “Erase” from the list.
5. “Erase?” will be displayed. Select “Yes” and press
to erase the group.
54
STORING CONTACTS
SPEED DIAL
In idle mode, calls can be placed to numbers stored in speed dial by pressing & holding the location
number on the key pad. For a 2-digit location number, press the first number, then press and hold
the second number.
1. Press
2. Press
[Menu], then press
"Speed dial".
"Contacts".
3. To assign a phone number to a location, select the location then press
[Assign].
•
"Empty" appears if the location is available.
Tip
4. Highlight a name from your contact list. If the contact has more than 1 number saved, press
/
until the correct number for the speed dial location is shown.
5. Press
[Done] to save the number to the speed dial location. You will see the contact name
next to the speed dial location number in the speed dial list.
55
MEMO
56
CHAPTER 6 MESSAGING
CHAPTER 6
MESSAGING
Charges apply for the use of these features.
See www.virginmobileusa.com for pricing.
57
MESSAGING
SEND A TEXT MESSAGE
To send a new text message:
1. Press
[Menu], then press
"Messaging". Press
"Send text msg".
[Next].
2. Under "Send to", input the phone number or e-mail then press
Press
[Options] to choose from:
• Contacts: Look up a phone number from your contact list.
• Recent List: Look up a number from your recent message list.
• Group: Look up a phone number from your group list.
3. Under "Enter Msg", input your message, press
[Options] to edit. For instructions on
how to enter text, please see page 42.
4. To send the message, press
[Send].
58
MESSAGING
SEND A PICTURE MESSAGE
To send a new picture message:
1. Press
2. Select a picture in My pictures.
3. Under "Send to", input the phone number or e-mail then press
[Menu], then press
"Messaging". Press
"Send Pic msg".
[Next].
[OK].
4. Under "Subject", press
, input the subject then press
5. Under "Message", press
, input the subject your message then press
[OK].
Press
to choose from:
• Insert/Delete Picture: To insert/delete a picture in a picture message.
• Insert/Delete Sound: To insert/delete a sound in a picture message.
6. To send the message, press
[Send].
59
MESSAGING
SEND AN E-MAIL MESSAGE
To send a new e-mail message:
1. Press
[Menu], then press
"Messaging". Press
"Send email msg".
2. Select an email provider.
If you have not downloaded an email client, you will see the message onscreen “The IM/Email Client
must be installed before feature can be used.” Press
desired client.
“Install Now” to choose and download the
3. Use your keypad to enter the required sign-in information for the selected provider, such as
user name, email address, and password, and select Sign In.
4. Follow the on screen instructions to read, reply to, compose, send, and manage emails in your
account.
SEND AN IM
To send a new instant message:
1. Press
[Menu], then press
"Messaging". Press
"Send IM".
2. Select an IM provider.
If you have not downloaded an IM client, you will see the message onscreen “The IM/Email Client must
be installed before feature can be used.” Press
client.
“Install Now” to choose and download the desired
3. Use your keypad to enter the required sign-in information for the selected provider, such as
user name and password, and select Sign In. (Your IM screen for the selected provider will be
displayed appear.)
60
MESSAGING
INBOX
Messages you’ve received will be stored in the Inbox.
1. Press
2. Select a message, then press
3. Press
[Menu], then press
"Messaging". Press
"Inbox".
. The message is displayed.
[Option], then select one of the following options:
• Call: Place a call to the number the message was sent to.
• Forward: Send the message to another person.
• Save: Saves the message in the Saved folder.
• Save contact: Save the phone number in Contacts.
• Erase: Delete the message.
• Cancel: Cancel the message.
VIRGIN ALERTS
Review the Virgin Alerts you’ve received.
[Menu], then press
2. To select "GoTo", press
1. Press
"Messaging". Press
"Virgin Alerts".
.
61
MESSAGING
SENT
The Sent folder manages sent messages.
1. Press
2. Select a message, then press
3. Press
[Menu], then press
"Messaging". Press
"Sent".
. The message is displayed.
[Option], then select one of the following options:
• Forward: Send the message to another person.
• Call: Place a call to the number the message was sent to.
• Lock/Unlock: Lock/Unlock the message.
• Compose New: Compose new message.
• Erase: Delete the message.
• Erase All: Delete the all Sent messages.
SAVED
Messages you’ve saved will be stored in the Saved folder.
1. Press
[Menu], then press
"Messaging". Press
"Saved".
2. Select a message, press
[Erase] then select “Yes.” Press
to delete the messages from
the saved folder.
3. Select a message, then press
. The message is displayed.
4. Press
[Options], then select one of the following options:
• Call: Place a call to the number the message was sent to.
• Forward: Send the message to another person.
• Save contact: Save the phone number in the contacts.
• Erase: Delete the message.
62
MESSAGING
VOICEMAIL
1. Press
[Menu], then press
"Messaging". Press
"Voicemail".
• Call Voicemail: Place a call to the number the voicemail was sent to.
• Last Voicemail Detail: View last voicemail information.
• Clear Voicemail icon: Delete the voicemail icon.
ERASE MSGS
This feature allows you to erase text and picture messages.
1. Press
[Menu], then press
"Messaging". Press
"Erase msgs".
2. Select:
1. Inbox
2. Sent
3. Saved
3. Select “Yes” and then press
to delete the messages from the selected folder.
63
MESSAGING
MSG SETTINGS
This feature enables you to manage your messaging settings.
SOUND
1. Press
2. Press
[Menu], then press
"Sound".
"Messaging". Select “Msg settings” from the list.
3. Select "Text messaging", "Picture messaging" or "Voicemail".
4. Select "My ringtones" or "Vibration".
• My ringtones: Highlight a ringtone from the list
.
• Vibration: Highlight a vibration from the list. (Vibration 1~6)
5. Press
[Select] to save the setting.
REMINDER
1. Press
2. Press
[Menu], then press
"Reminder".
"Messaging". Select “Msg settings” from the list.
3. Select "On" or "Off".
64
MESSAGING
AUTO TEXT
To edit the Auto text message you have saved:
1. Press
2. Press
[Menu], then press
"Auto text".
"Messaging". Select “Msg settings” from the list.
3. Highlight a message from the list. To add a new Quick Text message, press
"Add new".
to delete any
To edit the Quick Text message you have selected, press
characters you don't want then enter your text. Press
to the Auto Text list.
. Press
[Save] to save the text and return
4. From the Auto Text list, press
[Options] to select one of the following:
• Send text msg
• Send pic msg
• Erase
• Erase all
TEXT ENTRY
Sets an Entry Mode as a default:
1. Press
2. Press
[Menu], then press
"Text entry".
"Messaging". Select “Msg settings” from the list.
3. Highlight "T9 Word" or "Alphabet" then press
[Select] to save the setting.
65
MESSAGING
GROUP
To create and edit the Group:
1. Press
[Menu], then press
"Messaging". Select “Msg settings" from the list.
2. Press
"Group". For instructions on how to create a group, please see page 51.
SIGNATURE
Create a signature that can be automatically inserted at the end of a text message.
1. Press
2. Press
[Menu], then press
"Signature".
"Messaging". Select “Msg settings" from the list.
3. Highlight “On” or “Off” then press
[Select] to save the setting.
SAVE TO SENT FOLDER
Select if you want to automatically save a message after sending it.
1. Press
[Menu], then press
"Messaging". Select “Msg settings" from the list.
2. Press
"Save to sent folder".
3. Highlight “Auto”, "Off" or “User confirmation” then press
[Select] to save the setting.
•
If you don't want to automatically save a message after sending it, select "Off".
66
MESSAGING
AUTO ERASE
Automatically erases inbox messages when new messages arrives.
1. Press
2. Press
[Menu], then press
"Auto erase".
"Messaging". Select “Msg settings" from the list.
3. Highlight “Yes” or “No” then press
[Select] to save the setting. Automatically erases
oldest inbox messages when new messages arrive.
NOTIFICATION
Sets a notification:
1. Press
2. Press
[Menu], then press
"Notification".
"Messaging". Select “Msg settings" from the list.
3. Highlight “Icon & Message” or “Icon Only” then press
[Select] to save the setting.
67
MEMO
68
CHAPTER 7 MY STUFF
CHAPTER 7
MY STUFF
69
MY STUFF
Anything you download from Web - games, ringtones, graphics and applications - will be stored in
the My Stuff folder. You can access these files from My Stuff.
MY RINGTONES
You can download the latest ringtones right to your phone. Charges apply.
Visit www.virginmobileusa.com for details.
1. Press
2. Press
[Menu], then press
"My ringtones".
"My stuff".
3. Your list of ringtones is shown. Select “1. Get more ringtones” to download any additional
ringtones to your phone. Web will launch and you will be taken to the download menu.
4. Download your ringtones. From the information page select "Buy".
5. A confirmation page will notify you that the ringtone has been purchased.
To download the ringtone, select “Download”.
MY GRAPHICS
You can download new graphics to your phone. Charges apply.
Visit www.virginmobileusa.com for details.
1. Press
2. Press
[Menu], then press
"My graphics".
"My stuff".
3. Your graphics list will be shown. Select "1. Get more graphics" to download additional
wallpapers & screensavers to your phone. Web will launch and you will be taken to the
download menu.
70
MY STUFF
4. Download your graphic. From the information page select "Buy".
5. A confirmation page will notify you that the graphic has been purchased.
To download the graphic, select “Download”.
MY GAMES
You can download the latest games and play them right on your phone. Charges apply.
Visit www.virginmobileusa.com for details.
1. Press
2. Press
[Menu], then press
"My games".
"My stuff".
3. Your games list will be shown. Select “1. Get more games” to download additional games to
your phone. Web will launch and you will be taken to the download menu.
4. Download your game. From the information page select "Buy".
5. A confirmation page will notify you that the game has been purchased.
To download the game, select "Download".
71
MY STUFF
MY OTHER STUFF
You can download other stuff - such as applications, etc. to your phone. Charges apply.
Visit www.virginmobileusa.com for details.
1. Press
2. Press
[Menu], then press
"My other stuff".
"My stuff".
3. Select “1. Get more other stuff” to download additional screensaver to your phone. Web will
launch and you will be taken to the download menu.
4. Download your other stuff. From the information page select "Buy".
5. A confirmation page will notify you that the application has been purchased.
To download the application, select "Download".
MY SOUNDS
You can download new sounds to your phone.
1. Press
2. Press
[Menu], then press
"My sounds".
"My stuff".
3. Your list of sounds will be shown.
72
CHAPTER 8 VIRGINXL
CHAPTER 8
VIRGINXL
73
VIRGINXL
VirginXL is a fun collection of features which you can access directly from your phone - download
ringtones, games, graphics, and more. Charges apply. Visit www.virginmobileusa.com for details.
1. To access VirginXL, press
2. To scroll down the page or through the menus, press
3. To return to the previous page, press
4. To exit VirginXL, press
.
/
.
.
.
• When you select VirginXL, a session is initiated.
• You cannot receive incoming calls when a VirginXL session is in progress.
All incoming calls will be automatically forwarded to voicemail.
Tip
74
CHAPTER 9 PICTURES
CHAPTER 9
PICTURES
75
PICTURES
TAKE A PICTURE
Taking pictures with your phone ’s built-in camera is as simple as choosing a subject,pointing the
lens,and pressing a button.
1. Press
[Menu], then press
"Pictures". Press
"Take a picture".
• Camera can also be launched by holding the
[OK] from the idle Screen.
2. Using the phone ’s Main LCD as a viewfinder, aim the camera lens at your subject.
Press
• Self Timer: To select self timer 0ff, 5sec or 10 sec.
• Fun Frame: Highlight a fun frame from the list
[Options] to choose from:
.
• Image Effect: To adjust the image effect from Normal, Gray, Negative, Sepia, Emboss, Sketch.
• Mirror: Select a mirror type to use for take picture from Vertical or Horizontal.
• Resolution: To adjust the photo size from 640x480, 320x240, 160x120 or Wallpaper.
• Quality: To adjust the photo quality from Economy, Normal or Fine.
• Shutter Sound: Select a sound to use for shutter.
3. Press
until the shutter sounds. Press
To return to camera mode without saving the picture,press
[My Pics] to send a picture message.
.
Press
[Options] to choose from:
• Assign: To display the picture for picture caller ID,screensaver, incoming calls, wallpapers.
• Upload to My Pix: To upload the picture you just took to the picture messaging Web site.
• Take a Picture
• Edit title: To edit the selected picture’s title.
• Erase: To delete the picture you just took.
• Erase Multi-pics: To multi delete the pictures.
76
PICTURES
• Erase All: To delete the all pictures you just took.
• Picture Info: View picture information. (File Name, Time/Data, Resolution, Picture Size, Quality,
Assigned, Uploads.)
SEND A PICTURE MESSAGE
To send a picture message:
1. Press
2. Highlight a picture from the list then press
3. Under "Send to", input the phone number or e-mail then press
[Menu], then press
"Pictures". Press
"Send pic msg".
[Select].
[Next].
4. Under "Subject", press
5. Under "Message", press
6. Under "Picture", press
7. Under "Audio", press
8. To send the message, press
, input the subject then press
[OK].
, input the subject then press
[OK].
, select picture in My pictures then press
[Select].
, select Voice memo then press
[Send].
[Select].
MY PICTURES
1. Press
2. In Review Mode, you can view all the pictures you have taken and stored.
3. Select photo image with the Navigation Key then press to view picture.
[Menu], then press
"Pictures". Press
"My Pictures".
77
PICTURES
CAMERA SETTINGS
RESOLUTION
To adjust the size using resolution settings:
1. Press
2. Press
[Menu], then press
"Resolution".
"Pictures". Press
"Settings".
3. Select “640x480”, “320x240”, “160x120” or “Wallpaper” then press
[Select] to save
setting.
QUALITY
To select the quality of the picture:
1. Press
2. Press
[Menu], then press
"Quality".
"Pictures". Press
"Settings".
3. Select “Economy”, “Normal” or “Fine” then press
[Select] to save setting.
SHUTTER SOUND
To select shutter sound:
1. Press
2. Press
[Menu], then press
"Shutter sound".
"Pictures". Press
"Settings".
3. Select “Default”, “Shutter 1” or “Shutter 2” then press
[Select] to save setting.
78
PICTURES
HELP
View Resolution, Quality, Picture message informations.
RESOLUTION
1. Press
2. Press
[Menu], then press
"Resolution".
"Pictures". Press
.
"Help".
"Help".
3. To return to the previous page, press
QUALITY
1. Press
2. Press
[Menu], then press
"Quality".
"Pictures". Press
3. To return to the previous page, press
.
PICTURE MESSAGE
1. Press
2. Press
[Menu], then press
"Picture message".
"Pictures". Press
.
"Help".
3. To return to the previous page, press
79
MEMO
80
CHAPTER 10 CUSTOMIZING YOUR PHONE
CHAPTER 10
CUSTOMIZING
YOUR PHONE
81
CUSTOMIZING YOUR PHONE
Customizes your phone and optimizes performance through a variety of settings.
SOUND
RINGER TYPE
To select a ringer type for:
Voice Calls
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Ringer type".
Press
2. Press
"Voice calls".
3. Select "With Caller ID" or "No Caller ID" then press
.
• With Caller ID: Any call from a number whose phone number is not restricted or blocked.
• No Caller ID: From restricted or blocked numbers.
4. Select your desired ringers from the list by pressing
highlighted, press [Play].
/
. To hear a ringtone that is
5. To save the selected ringtone, press
[Select] to save the setting.
82
CUSTOMIZING YOUR PHONE
VOLUME
Control the volume for Ringtone, Speakerphone, Headset, and Advanced settings.
Ringer
To set ringer volume and incoming call alert options:
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Volume".
Press
2. Press
"Ringer".
3. Press
/
to adjust the volume level. Press
to select Vibrate when High as the volume
level.
The available volume settings are:
• Silence All: All sounds are off.
• Vibrate All: Phone will vibrate to alert you of incoming call or message.
• Ringtone mode: 1~5.
• You can also adjust the ringtone volume with the side keys.
Tip
4. Press
[Save] to save the setting.
83
CUSTOMIZING YOUR PHONE
Receiver
To adjust the receiver volume:
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Volume".
Press
2. Press
"Receiver".
3. Adjust the Receiver volume by pressing
/
. Press
[Save] to save the setting.
The volume settings available are:
• Ringtone mode: 1~5.
Speakerphone
To adjust the speakerphone volume:
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Volume".
Press
2. Press
"Speakerphone".
3. Adjust the Speakerphone volume by pressing
/
. Press
[Save] to save the setting.
The volume settings available are:
• Ringtone mode: 1~5.
84
CUSTOMIZING YOUR PHONE
Headset
To adjust the headset volume:
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Volume".
Press
2. Press
"Headset".
3. Adjust the Headset volume by pressing
/
. Press
[Save] to save the setting.
The volume settings available are:
• Ringtone mode: 1~5.
Key Tone
To adjust the Key Tone volume:
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Volume".
Press
2. Press
"Key tone".
3. Adjust the Key Beep volume by pressing
/
. Press
[Save] to save the setting.
The volume settings available are:
• Ringtone mode: 1~5.
85
CUSTOMIZING YOUR PHONE
Applications
To adjust the Applications volume:
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Volume".
Press
2. Press
"Applications".
3. Highlight "Use ringer" or "Separate" and press
to select. If Separate is selected, press
to highlight the volume level. Press to adjust the volume level.
/
This setting controls the volume of the applications.
• Use ringtone vol.: Plays the application at the same volume as the voice ringtone and allows the
side volume keys to change the application volume at the same time as the voice
ringtone.
• Use separate vol.: Plays the application at the selected volume level. Alerts will always play at this
level unless the ringtone volume is set to “Silence all” or “Vibrate”.
4. Press
[Save] to save the setting.
5. Press
[Help] for additional information
86
CUSTOMIZING YOUR PHONE
Others
Messaging
To adjust the message alert volume:
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Volume".
“Messaging”.
Press
2. Press
“Others”, then press
3. Highlight "Use ringer" or "Separate" and press
to select. If Separate is selected, press
to adjust the volume level.
to highlight the volume level. Press
/
This setting controls the volume of new text message alerts.
• Use ringer vol.: Plays the text message alerts at the same volume as the voice ringtone and allows
the side volume keys to change the text message alert volume at the same time as
the voice ringtone.
• Separate vol.: Plays the text message alerts at the selected volume level. Alerts will always play at
this level unless the ringtone volume is set to “Silence all” or “Vibrate”.
• Always vibrate: Select to this causes the application to add vibration to any sound. Only works with
when “Separate” is selected.
4. Press
5. Press
[Save] to save the setting.
[Help] for additional information.
87
CUSTOMIZING YOUR PHONE
Voicemail
To adjust the voicemail alert volume:
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Volume".
Press
2. Press
“Others”, then press
“Voicemail”.
3. Highlight "Use ringer" or "Separate" and press
to select. If Separate is selected, press
to highlight the volume level. Press to adjust the volume level.
/
This setting controls the volume of new voicemail alerts.
• Use ringtone vol.: Plays the voicemail alerts at the same volume as the voice ringtone and allows
the side volume keys to change the voicemail alert volume at the same time as
the voice ringtone.
• Use separate vol.: Plays the voicemail alerts at the selected volume level. Alerts will always play at
this level unless the ringtone volume is set to “Silence all” or “Vibrate”.
• Always vibrate: Selecting this causes the application Select to add vibration to any sound. Only
works with when “Separate” is selected.
4. Press
[Save] to save the setting.
5. Press
[Help] for additional information.
88
CUSTOMIZING YOUR PHONE
Alarm & Scheduler
To adjust the Alarm & Scheduler volume:
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Volume".
Press
2. Press
“Others”, then press
“Alarm & Scheduler”.
to select. If Separate is selected, press
to adjust the volume level.
3. Highlight "Use ringer" or "Separate" and press
to highlight the volume level. Press
/
This setting controls the volume of the alarm & scheduler.
• Use ringtone vol.: Plays the Alarm & Scheduler at the same volume as the voice ringtone and allows
the side volume keys to change the alarm volume at the same time as the voice
ringtone.
• Use separate vol.: Plays the Alarm & Scheduler at the selected volume level. Alerts will always play
at this level unless the ringtone volume is set to “Silence all” or “Vibrate”.
• Always vibrate: Selecting this causes the application to add vibration to any sound.
Only works with when “Separate” is selected.
4. Press
5. Press
[Save] to save the setting.
[Help] for additional information.
89
CUSTOMIZING YOUR PHONE
Power On/Off
To adjust the Power On/Off volume:
1. Press
[Menu], then press
"Sound", then press
"Settings".
“Volume".
Press
2. Press
“Others”, then press
“Power On/Off”.
3. Highlight "Use ringer" or "Separate" and press
to select. If Separate is selected, press
to highlight the volume level. Press to adjust the volume level.
/
This setting controls the volume of the sound when turning the phone on and off.
• Use ringtone vol.: Plays the power on/off alert at the same volume as the voice ringtone and allows
the side volume keys to change the power on/off alert volume at the same time
as the voice ringtone.
• Use separate vol.: Plays the power on/off alert at the selected volume level. Alerts will always play
at this level unless the ringtone volume is set to “Silence all” or “Vibrate”.
• Always vibrate: Selecting this causes the application Select to add vibration to any sound.
Only works with when “Separate” is selected.
4. Press
[Save] to save the setting.
5. Press
[Help] for additional information.
90
CUSTOMIZING YOUR PHONE
ALERTS
This feature allows you to set additional phone alerts.
Minute Minder
This alert notifies you with a beep tone every minute you are on a call.
1. Press
[Menu], then press
"Sound", then press
"Settings".
"Alerts".
Press
2. Press
"Minute Minder".
3. Highlight “On” or “Off” then press
[Select] to save the setting.
Connect Tone
This alert notifies you with a beep tone the a call has been successfully placed.
1. Press
[Menu], then press
"Sound", then press
"Settings".
"Alerts".
Press
2. Press
"Connect tone".
3. Highlight “On” or “Off” then press
[Select] to save the setting.
Service Tone
This alert notifies you with a beep tone that service is available for your phone.
1. Press
[Menu], then press
"Sound", then press
"Settings".
"Alerts".
Press
2. Press
"Service tone".
3. Highlight “On” or “Off” then press
[Select] to save the setting.
91
CUSTOMIZING YOUR PHONE
Fade Tone
This alert notifies you with a beep tone when the signal for your service is low.
1. Press
[Menu], then press
"Sound", then press
"Settings".
"Alerts".
Press
2. Press
"Fade tone".
3. Highlight “On” or “Off” then press
[Select] to save the setting.
TONE LENGTH
To adjust key pad tone length:
1. Press
[Menu], then press
"Sound", then press
"Settings".
"Tone length".
[Save] to save the setting.
Press
3. Highlight “Normal” or “Long” then press
92
CUSTOMIZING YOUR PHONE
DISPLAY
This set of features allows you to customize your display.
GRAPHICS
Select an image for your idle display.
Graphics
1. Press
[Menu], then press
"Display", then press
"Settings".
"Graphics".
Press
2. Press
"Graphics".
3. Select "My graphics" or "My pictures".
4. Press
/
to scroll through the images.
5. Press
[View], then press
[Select] to save the setting.
Clock and calendar
1. Press
[Menu], then press
"Display", then press
"Settings".
"Graphics".
Press
2. Press
"Clock and calendar".
Clock types:
• Digital Clock: Shows displays date and time in written format.
• Calendar: Shows displays the current month's calendar.
• Dual clock: Shows Digital displays at top of display and selected city with its Digital date and time at
bottom of display. Press
[City] to select a city.
• Analog Clock: Shows displays time in a standard clock format.
93
CUSTOMIZING YOUR PHONE
3. Press
[Save] to save the setting.
Screensaver
1. Press
[Menu], then press
"Display", then press
"Settings".
"Graphics".
Press
2. Press
"Screensaver".
• Time: Select 5, 10, 15, 20 secs or Screensaver off.
• My Graphics: Press
/
to scroll through the images in My graphics.
• My Pictures: Press
/
to scroll through the images in My pictures.
3. Press
[Select] to save the setting.
INCOMING CALLS
To select an image for Incoming Calls:
1. Press
[Menu], then press
"Display", then press
"Settings".
"Incoming calls".
to scroll through the images.
Press
2. Select My graphics or My pictures, then press
3. Press [Select] to save the setting.
/
MENU STYLE
Select how the phone menu will display.
1. Press
[Menu], then press
"Display", then press
"Settings".
"Menu style".
Press
2. Highlight “Grid style” or “List style” then press
[Select] to save the setting.
94
CUSTOMIZING YOUR PHONE
GREETING
The greeting is your personal label for your phone. It appears on the main screen along the bottom
of the display.
1. Press
[Menu], then press
"Display", then press
"Settings".
"Greeting".
Press
2. Select "On" or "Off".
3. If you select "On", the current greeting text is displayed. Press
then enter your new greeting. Press [Options] to change the input mode.
[Save] to save the greeting.
to delete the greeting,
4. Press
BACKLIGHT
Turn on the backlight on the display and keypad for easy viewing in dark places.
Display
Backlight the display:
1. Press
[Menu], then press
"Display", then press
"Settings".
"Backlight".
Press
2. Press
"Main display".
3. Highlight one of the following options by pressing
/
.
• 5 seconds, 10 seconds, 20 seconds, Always On, Always Dim.
4. Press
[Select] to save the setting.
95
CUSTOMIZING YOUR PHONE
Keypad
Backlight the Keypad:
1. Press
[Menu], then press
"Display", then press
"Settings".
"Backlight".
Press
2. Press
"Keypad".
3. Highlight one of the following options by pressing
/
.
• 5 seconds, 10 seconds, 20 seconds, Always Off.
4. Press
[Select] to save the setting.
96
CUSTOMIZING YOUR PHONE
MESSAGING
This feature enables you to manage your message settings.
SOUND
1. Press
2. Press
[Menu], then press
"Sound".
"Settings". Press
"Messaging".
3. Select "Text messaging", "Picture messaging" or "Voicemail".
• My ringtones: Select a ringtone.
• Vibration: Select Vibration 1~6.
4. Press
[Select] to save the setting.
REMINDER
When Reminder is on, your phone periodically alerts the user until all the received messages are
checked by the user.
1. Press
2. Press
[Menu], then press
"Reminder".
"Settings". Press
"Messaging".
3. Highlight "On" or “Off”, then press
[Select] to save the setting.
97
CUSTOMIZING YOUR PHONE
AUTO TEXT
To edit the Auto Text message you have saved:
1. Press
2. Press
[Menu], then press
"Auto Text".
"Settings". Press
"Messaging".
3. Highlight a message from the list. To add a new Quick Text message, press
[Add New].
4. To edit the Quick Text message you have selected, press
characters you don't want then enter your text. Press
the Auto Text list.
. Press
to delete any
[Save] to save the text and return to
TEXT ENTRY
Sets an Entry Mode as a default:
1. Press
2. Press
[Menu], then press
"Text entry".
"Settings". Press
"Messaging".
3. Highlight "T9 Word" or "Alphabet" then press
[Select] to save the setting.
GROUP
To edit the Group:
1. Press
2. Press
[Menu], then press
"Group".
"Settings". Press
"Messaging".
3. To add a new Group, press
[Add].
4. Press
[Save] to save the new group
98
CUSTOMIZING YOUR PHONE
SIGNATURE
Create a signature that can be automatically inserted at the end of a text message.
1. Press
2. Press
[Menu], then press
"Signature".
"Settings". Press
"Messaging".
3. Highlight "On" or "Off" then press
[Select] to save the setting.
SAVE TO SENT FOLDER
Select if you want to automatically save a message after sending it.
1. Press
[Menu], then press
"Settings". Press
"Messaging".
2. Press
"Save to Sent folder".
3. Highlight "Auto", "Off" or "User confirmation" then press
[Select] to save the setting.
AUTO ERASE
Automatically erases messages when new messages arrive.
1. Press
2. Press
[Menu], then press
"Auto Erase".
"Settings". Press
"Messaging".
3. Highlight "Yes" or "No" then press
[Select] to save the setting.
NOTIFICATION
Sets an Notification:
1. Press
2. Press
[Menu], then press
"Notification".
"Settings". Press
"Messaging".
3. Highlight “Icon & Message” or “Icon Only” then press
[Select] to save the setting.
99
CUSTOMIZING YOUR PHONE
BLUETOOTH
Bluetooth allows you to connect your phone to compatible, Bluetooth-enabled devices, such as a
wireless headset (sold separately). Since devices with Bluetooth connectivity communicate using
radio waves, your phone and the other device do not need to be in direct line-of-sight. The two
devices only need to be within 10 meters (30 feet) of each other. However, the connection may
sometimes suffer interference from obstructions such as walls or other electronic devices.
The Super Slice is compatible with devices that support the Bluetooth® Headset (HSP), Hands-Free
(HFP) Profiles. Your phone is based on the Bluetooth® specification, but it is not guaranteed to
work with all devices enabled with Bluetooth® wireless technology.
PAIRING YOUR PHONE
You can manage your Bluetooth connections through the My Device menu.
1. Press
2. Press
[Menu], then press
"My device".
"Settings". Press
"Bluetooth".
Press
[Options] to choose from:
• Add New: Searches for Bluetooth devices in possible range.
• Assign Short Name: To assign short a name to a device.
• Device Info: Displays information about a Bluetooth device.
• Erase: To erase a selected Bluetooth device.
• Erase All: To erase all Bluetooth devices.
3. Your phone will display the names of Bluetooth devices it has previously discovered. If none
have been detected, “No matches found” will be displayed.
4. For a new device, press
[Options], then
“Add new”.
100
CUSTOMIZING YOUR PHONE
•
If Bluetooth is disabled in your phone, you will get the message “Bluetooth is disabled. Enable?”.
Press to enable Bluetooth.
5. Your phone will search for a Bluetooth device within range. Once detected, the name will be
displayed.
6. Press
[Pair] to pair the devices. “Add [device name] to my device?” will be displayed.
for “Yes”.
Press
7. Enter your passcode then press
[OK]. Consult your Bluetooth device manual for the code.
Typically the default passcode is 0000.
8. Once your new Bluetooth device is paired with your phone, you will see a confirmation screen.
Press
to connect the device to your phone.
SETTINGS
Customizes your phone and optimizes performance through a variety of settings:
1. Press
2. Press
[Menu], then press
"Settings".
"Settings". Press
"Bluetooth".
• Set Bluetooth: Turn Bluetooth on or off.
• Handset’s visibility: Select “Hidden” or “Shown to all”.
• Handset’s Name: Edit the name of the device.
3. Press
[Save] to save the settings.
101
CUSTOMIZING YOUR PHONE
SUPPORT SERVICE
Displays the following list of options:
1. Press
2. Press
[Menu], then press
"Support service".
"Settings". Press
"Bluetooth".
• Hand Free Service: This is used to allows car hands-free kits to communicate with mobile phones in the
car. In the car, the stereo is used for the phone audio and a microphone is installed in
the car for sending outgoing audio.
• Headset Service: This is provides support for the popular Bluetooth headsets to be used with mobile
phones. When connected and configured, the headset can act as the remote device a
audio input and output interface.
INFORMATION
View Name, Address informations:
1. Press
2. Press
[Menu], then press
"Information".
"Settings". Press
"Bluetooth".
3. View information (Name, Address). To return preview page, press
[Close].
102
CUSTOMIZING YOUR PHONE
SECURITY
Use these settings to prevent unauthorized use of your phone.
HANDSET LOCK
Turn on the lock to prevent the phone from being used without entering the password first.
IMPORTANT: Be sure to write down your lock code if you change it. Virgin Mobile cannot unlock
your phone for you if you forget your lock code.
1. Press
[Menu], then press
Enter your password.
"Settings". Press
"Security".
• The default password is the last 4 digits of your phone number.
"Handset lock".
2. Press
3. Highlight “Off”, “When switch on”, or “Immediately” then press
[Select] to save the
setting.
• Off: Do not lock the handset.
• When switch on: Lock the phone when switch on.
• Immediately : Lock the phone now.
103
CUSTOMIZING YOUR PHONE
KEY LOCK
Set Key Lock:
1. Press
[Menu], then press
Enter your password.
"Settings". Press
"Security".
• The default password is the last 4 digits of your phone number.
"Key lock".
2. Press
3. Highlight “Off”, “20sec”, "30sec" "1min" or “3min” then press
[Select] to save the
setting.
SPECIAL NUMBER
This features allows you to set 3 phone numbers that can be called even when the phone is locked.
1. Press
[Menu], then press
Enter your password.
"Settings". Press
"Security".
• The default password is the last 4 digits of your phone number.
2. Press
"Special number".
3. Select a location and press
[Add].
4. Enter the phone number and press
[Save] to save it to that location.
104
CUSTOMIZING YOUR PHONE
CHANGE LOCK CODE
You can change the 4-digit password to lock and unlock your phone.
IMPORTANT: Be sure to write down your lock code if you change it. Virgin Mobile cannot unlock
your phone for you if you forget your lock code.
1. Press
[Menu], then press
Enter your password.
"Settings". Press
"Security".
• The default password is the last 4 digits of your phone number.
"Change lock code".
2. Press
3. Enter your lock code then enter your new lock code. Enter your new lock code again.
ERASE DATA
Erase all data in your phone.
1. Press
[Menu], then press
Enter your password.
"Settings". Press
"Security".
• The default password is the last 4 digits of your phone number.
"Erase Data".
2. Press
3. Select “Erase Contacts”, “Erase downloads”, “Erase voice memo”, “Erase pictures”, or “Erase
message”.
4. A warning message displayed.
5. Select "Yes" then press
to erase data in your phone.
105
CUSTOMIZING YOUR PHONE
RESET BROWSER
Reset browser setting.
1. Press
[Menu], then press
Enter your password.
"Settings". Press
"Security".
• The default password is the last 4 digits of your phone number.
2. Press
3. Select "Yes" then press
"Reset Browser".
to reset browser setting.
DEFAULT SETTINGS
Reset all settings.
1. Press
[Menu], then press
Enter your password.
"Settings". Press
"Security".
• The default password is the last 4 digits of your phone number.
2. Press
"Default Settings".
3. A warning message displayed.
4. Select "Yes" then press
to reset all settings.
106
CUSTOMIZING YOUR PHONE
RESET HANDSET
Delete all data from your device.
1. Press
[Menu], then press
Enter your password.
"Settings". Press
"Security".
• The default password is the last 4 digits of your phone number.
2. Press
"Reset handset".
3. A warning message displayed.
4. Select "Yes" then press
to erase all data in your phone.
107
CUSTOMIZING YOUR PHONE
LOCATION
Your telephone is equipped with a Location feature for use in connection with location-based
services that may be available in the future. The Location Feature allows the network to detect your
position. Turning Location Off will hide your location from everyone except 911.
1. Press
[Menu], then press
"Settings". Press
"Location".
• Turning location on will allow the network to detect your position using GPS technology, making some
Virgin Mobile applications and services easier to use. Turning location off will disable the GPS location
function for all purposes except 911, but will not hide your general location based on the cell site
serving your call. No application or services may use your location without your express permission.
GPS enhanced 911 is not available in all areas.
2. Press
[Next]. Highlight “Enable” or “Disable”, then press
[Select] to select it.
• Enable: Turning location “Enable” lets the network detect your whereabouts using GPS.
• Disable: Turning location "Disable" disables GPS- except for 911- but cell tower technology may still used
to detect your whereabouts for some features and basic telephone service.
108
CUSTOMIZING YOUR PHONE
CALL SETTINGS
ANSWER MODE
This feature allows you to select the answer mode.
1. Press
[Menu], then press
"Call Settings", then press
"Settings".
"Answer mode".
[Select] to save the setting.
Press
2. Highlight “Talk key only” or “Any key”, then press
• Talk key only: Press only
to answer a call.
• Any key: Press any key to answer an incoming call.
AUTO ANSWER
This features allows you to set the phone to answer automatically when you're using a hands-free
headset.
1. Press
[Menu], then press
"Call Settings", then press
"Settings".
"Auto answer".
Press
2. Highlight “Off”, “5 sec”, “10 sec”, or “20 sec” then press
[Select] to save the setting.
109
CUSTOMIZING YOUR PHONE
OTHERS
TTY
Your phone is able to operate with a TTY(Teletypewriter) device. This feature is system dependent
and may not be available in all areas.
1. Press
[Menu], then press
• Enabling TTY may impair headset use and non- TTY accessory performance.
[Next]. Select “On” or “Off.”, then press [Select] to save the setting.
"Settings". Press
“Others”, then press
"TTY".
2. Press
ABBREV. DIAL
This function allows you to dial just the last 4 digits of phone number, instead of all the digits. If
you have several phone numbers that start with the same digits, you can enter the beginning
numbers here so when you dial the phone, all you enter is the last 4 digits.
1. Press
[Menu], then press
"Others", then press
"Settings".
"Abbrev. Dial".
[Select] to save the setting.
3. If On is selected, a blank screen will appear. Enter the digits that are common to several phone
numbers you dial and press
Press
2. Select “On” or “Off”, then press
.
• You have 5 numbers you dial often that all begin with (516) 123. In the blank screen that appears when you select
"Enable", type in 516123.
• When you need to dial (516) 123-6652, simply press 6652
(516) 123-6652.
. Your phone will show it is dialing
110
CUSTOMIZING YOUR PHONE
CONTACTS MATCH
This function will match your abbreviated dialed number with an entry from your phone's contact
list. So when you dial the 4 digits, your phone will show the name of the contact you are dialing as
well as the phone number.
1. Press
[Menu], then press
"Others", then press
"Settings".
"Contacts Match".
Press
2. Select “On” or “Off”, then press
[Select] to save the setting.
TYPING MODE
1. Press
[Menu], then press
"Others", then press
"Settings".
"Typing mode".
Press
• Auto-capital: Select "On" or "Off".
• Auto-space: Select "On" or "Off".
• My words: To add my words, press
• T9 settings:
[Add].
-Prediction length: Select "3+letter words", "4+letter words", "5+letter words" or
"6+letter words".
-Next word prediction: Select "On" or "Off".
-Word completion: Select "On" or "Off".
-Word choice list: Select "On" or "Off".
• Help
111
CUSTOMIZING YOUR PHONE
VOICE COMMANDS
Optimizes performance through a Voice Recognition Settings.
Voice Recognition Results
The “Voice Recognition Results” option will allow you to choose if the Command System prompts
you with a list of potential matches.
1. Press
[Menu], then press
"Others", then press
"Settings".
"Voice Commands".
Press
2. Press
"Voice Recognition Results".
3. Select “One” or “Three Best”, then press
. Press
[Close] to save the setting.
Voice Calibration
Voice Calibration is the process of optimizing the voice recognition software to your voice.
Train Voice requires that you make recordings of your voice, which are then used to customize the
voice recognition system. This will take a few minutes and you should be in a quiet environment
for optimum training.
1. Press
[Menu], then press
"Others", then press
"Settings".
"Voice Commands".
Press
2. Press
“Voice Calibration”.
3. Select “Train Words” or “Train Digits”. You will be prompted to speak the words listed on the
screen. Say each word as you are prompted.
112
CUSTOMIZING YOUR PHONE
Prompts
The prompts settings, “Mode” or “Timeout", will allow you to set how you are notified by the voice
command system and the duration in which you can respond. To access “Prompts:”
1. Press
[Menu], then press
"Others", then press
"Settings".
"Voice Commands".
Press
2. Press
"Prompts".
3. Select “Mode“ or “Timeout”.
• Mode: Select "Prompt" or “Tones Only”.
• Timeout: Select “5 sec” or “10 sec”.
4. Press
, then press
[Close] to save the setting.
Number Format
1. Press
[Menu], then press
"Others", then press
"Settings".
"Voice Commands".
Press
2. Press
"Number Format".
3. Select “Accept Any“ or “North America”.
4. Press , then press [Close] to save the setting.
113
MEMO
114
CHAPTER 11 USING TOOLS
CHAPTER 11
USING TOOLS
This section shows you how to use features that can
help you keep up with your contacts, schedules and
appointments.
115
USING TOOLS
VOICE
VOICE MEMO
Voice Memo allows you to record a reminder message that can be up to 4 minutes.
To record a memo:
1. Press
[Menu], then press
"Voice". Press
"Tools".
"Voice Memo ".
Press
2. To record a voice memo, select press
[Record].
3. To stop recording a voice memo, press
[Stop]. Stopping the recording will automatically
save the entry. The list is sorted by dates of the voice memo list.
4. Press
[Options] to select one of the following options:
• Play: To play voice memo.
• Rename: To edit voice memo name.
• Erase: To delete a voice memo.
• Erase All: To delete all voice memo.
VOICE COMMAND
To activate voice recognition:
1. Press
[Menu], then press
"Voice". Press
"Tools".
"Voice Command ".
Press
2. When prompted,say one of the following commands:
• Call, Digit Dial, Voicemail, My Phone #, Status, Help.
116
USING TOOLS
• When it recognizes one of these commands,the phone launches the associated application. You may be
asked to repeat a command if the command is not recognized by voice recognition.
Tip
3. To return to the previous page,press
.
TIP CALCULATOR
Your phone comes with two calculators: a standard calculator and a tip calculator.
1. Press
[Menu], then press
"Tip calculator".
"Tools".
Press
2. Input numbers using your keypad, then press
.
3. Input Rate numbers using your keypad. Press
for a decimal point.
4. Press
[Clear] for clear tip calculator.
to calculate the result.
Press
117
USING TOOLS
CALCULATOR
Your phone comes with two calculators: a standard calculator and a tip calculator.
1. Press
[Menu], then press
"Calculator".
"Tools".
Press
2. Enter numbers using your keypad, and use the following keys to enter mathematical functions:
• Press
• Press
• Press
for Multiplication (x). Press
for Addition (+). Press
to change a number from positive (+) to negative (-).
for Division (÷). Press
for a decimal point. Press
for Subtraction (-).
[Clear] to clear all numbers.
3. Press
to calculate the result.
ALARM CLOCK
1. Press
[Menu], then press
"Tools".
Press
"Alarm Clock".
2. Select Alarm 1, 2 or 3 to set a new alarm.
3. The setting field will be highlighted. Press
to select alarm options.
• Set: Press
/
to select alarm on or off.
• Time: Use the keypad to set a time for the alarm and
to select “AM” or “PM”.
to select Daily/Once/Mon to Fri/Sat to Sun.
to select 5Min/10Min/15Min/20Min.
• Repeat: Press
• Snooze: Press
/
/
• Ring type: Press navigation keys to select a ringtone for the alarm sound.
4. To save an alarm setting press
[Save].
118
USING TOOLS
SCHEDULER
ADD NEW EVENT
1. Press
[Menu], then press
to choose a date in the calendar.
[Add] to add an event to the calendar.
"Tools". Press
"Scheduler".
2. Press
Press
3. The Schedule screen will be displayed. When the Title field is highlighted, enter the event title.
Then press
pressing
Press
[Save]. Press
to the number and press the digit key you want.
to move to the next field. Edit the start time by pressing
press the digit key you want. Press for “AM” or “PM”.
Press to move to the next field. Edit the end date by pressing
press the digit key you want.
to move to the next fields. Edit the start date by
/
/
to the number and
to the number and
to the number and
/
/
Press
to move to the next field. Edit the end time by pressing
press the digit key you want. Press
for “AM” or “PM”.
Press
to move to the next field. In the Contents field, enter any notes or message for the
event, then press
next field. In the Notice field, press
Before 1 hour or Before one day. Press
[Save] to go back to the Scheduler screen. Press
to move to the
to select On Time, Before 10 min, Before 20min,
to move to the next field. In the Snooze field,
/
press
/
to select 5Min, 10Min, 15Min, or 20Min. Press
to move to the next fields.
[Select].
In the Ring Type field, highlight the ringtone you want and press
4. Press
[Save] to save the event.
5. The date of the event will be marked on your calendar.
119
USING TOOLS
MEMO PAD
Your phone includes an internal memo pad that can be used to compose and store reminders and
notes.
1. Press
[Menu], then press
"Memo Pad".
"Tools".
Press
2. To input a memo, select press
[Add].
3. Press
[Save] to save the memo.
STOPWATCH
You can simultaneously time up to 10 different events.
1. Press
[Menu], then press
"Stopwatch".
"Tools".
Press
2. To measure a time period:
• To start, press
• To stop the timing, press
• Press
• To reset it, press
[Start].
[Stop]. To continue timing, press
[Cont.].
[Lap] to save the time at one instance. You can show up to 10 times.
[Reset].
120
USING TOOLS
WORLD CLOCK
To display the time and date in pre-programmed cities:
1. Press
[Menu], then press
"World Clock".
"Tools".
Press
2. Press
/
to scroll through the different cities.
• DST: Specifies whether the current time of the selected place is adjusted to daylight saving time.
• Dual: Show ahead dual clock.
MEMORY MANAGER
1. Press
[Menu], then press
"Tools".
Press
"Memory manager".
2. View total, used, free memory information.
121
MEMO
122
CHAPTER 12 WARRANTY
CHAPTER 12
WARRANTY
123
WARRANTY
MANUFACTURER’S WARRANTY
12 MONTH LIMITED WARRANTY
UTStarcom Personal Communications (the Company) warrants to the original retail purchaser of this UTStarcom
handheld portable cellular telephone, that should this product or any part thereof during normal consumer
usage and conditions, be proven defective in material or workmanship that results in product failure within the
first twelve (12) month period from the date of purchase, such defect(s) will be repaired or replaced (with new
or rebuilt parts) at the Company’s option, without charge for parts or labor directly related to the defect(s).
The antenna, keypad, display, rechargeable battery and battery charger, if included, are similarly warranted for
twelve (12) months from date of purchase.
This Warranty extends only to consumers who purchase the product in the United States or Canada and it is not
transferable or assignable.
This Warranty does not apply to:
(a) Product subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration,
misuse, improper installation or repair or improper storage;
(b) Product whose mechanical serial number or electronic serial number has been removed, altered or defaced.
(c) Damage from exposure to moisture, humidity, excessive temperatures or extreme environmental conditions;
(d) Damage resulting from connection to, or use of any accessory or other product not approved or authorized
by the Company;
(e) Defects in appearance, cosmetic, decorative or structural items such as framing and non-operative parts;
(f) Product damaged from external causes such as fire, flooding, dirt, sand, weather conditions, battery leakage,
blown fuse, theft or improper usage of any electrical source.
The Company disclaims liability for removal or reinstallation of the product, for geographic coverage, for
inadequate signal reception by the antenna or for communications range or operation of the cellular system as
a whole.
124
WARRANTY
When sending your wireless device to UTStarcom Personal Communications for repair or service, please note
that any personal data or software stored on the device may be inadvertently erased or altered. Therefore,
we strongly recommend you make a back up copy of all data and software contained on your device before
submitting it for repair or service. This includes all contact lists, downloads (i.e. third-party software applications,
ringtones, games and graphics) and any other data added to your device. In addition, if your wireless device
utilizes a SIM or Multimedia card, please remove the card before submitting the device and store for later
use when your device is returned, UTStarcom Personal Communications is not responsible for and does not
guarantee restoration of any third-party software, personal information or memory data contained in, stored
on, or integrated with any wireless device, whether under warranty or not, returned to UTStarcom Personal
Communications for repair or service.
To obtain repairs or replacement within the terms of this Warranty, the product should be delivered with proof of
Warranty coverage (e.g. dated bill of sale), the consumer’s return address, daytime phone number and/or fax
number and complete description of the problem, transportation prepaid, to the Company at the address shown
below or to the place of purchase for repair or replacement processing.
In addition, for reference to an authorized Warranty station in your area, you may telephone in the United States
(800) 229-1235, and in Canada (800) 465-9672 (in Ontario call 416-695-3060).
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LAIBILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR
BREACH OF ANY WARRANTY MUST BE BROUGHT WITHIN A PERIOD OF 18 MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR AN SPECIAL CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. THE
COMPANY SHALL NOT BE LIABLE FOR THE DELAY IN RENDERING SERVICE UNDER THIS WARRANTY OR LOSS OF
USE DURING THE TIME THE PRODUCT IS BEING REPAIRED OR REPLACED.
125
WARRANTY
No person or representative is authorized to assume for the Company any liability other than expressed herein
in connection with the sale of this product.
Some states or provinces do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damage so the above limitation or exclusions may not apply to you.
This Warranty gives you specific legal rights, and you may also have other rights, which vary from state to state
or province to province.
IN USA:
UTStarcom Personal Communications 555 Wireless Blvd.
Hauppauge, NY 11788
(800) 229-1235
IN CANADA:
UTStarcom Canada Company
5535 Eglinton Avenue West
Suite# 234
Toronto, ON M9C 5K5
(800) 465-9672
126
CHAPTER 13 SAFETY
CHAPTER 13
SAFETY
Read this important safety information before using
your phone.
127
SAFETY
SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES
Read This Information Before Using Your Handheld Portable Cellular Telephone
DRIVING SAFETY
Talking on the phone while driving is extremely dangerous and is illegal in some states. Remember, safety
comes first. Check the laws and regulations on the use of phones in the areas where you drive. Always obey
them. If you must use your phone while driving, please:
•
•
•
Give full attention to driving. Driving safely is your first responsibility.
Use hands-free operation and/or one-touch, speed dialing, and auto answer modes.
Pull off the road and park before making or answering a call.
An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious injury could result.
WARNING!: Failure to follow these instructions could lead to serious personal injury and possible property
damage.
ELECTRONIC DEVICES
Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) signals.
Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment may not
be shielded against the RF signals from your wireless phone. Therefore, use of your phone must be restricted in
certain situations.
PACEMAKERS
The Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be
maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with the independent research by and recommendations of
Wireless Technology Research.
128
SAFETY
Never come closer than six (6) inches to a person with a heart pacemaker implant when using your phone.
Doing so could result in interference with the function of the pacemaker.
Persons with pacemakers :
•
•
•
•
ALWAYS keep the phone more than six inches from your pacemaker when the phone is turned on.
Do not carry the phone in a breast pocket.
Use the ear opposite the pacemaker to minimize the potential for interference.
If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may
want to consult your service provider (or call the customer service line to discuss alternatives).
OTHER MEDICAL DEVICES
If you use any other personal medical device, consult the manufacturer of your device to determine if they
are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this
information.
HOSPITALS AND HEALTH CARE FACILITIES
Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so.
Hospitals or healthcare facilities may be using equipment that could be sensitive to external RF energy.
VEHICLES
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check
with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of
any equipment that has been added to your vehicle.
POSTED FACILITIES
Turn your phone OFF where posted notices so require.
129
SAFETY
AIRCRAFT
FCC regulations prohibit using your phone while in the air. Turn your phone OFF before boarding an aircraft.
Always request and obtain prior consent and approval of an authorized airline representative before using your
phone aboard an aircraft. Always follow the instructions of the airline representative whenever using your
phone aboard an aircraft, to prevent any possible interference with airborne electronic equipment.
BLASTING AREAS
To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted
“Turn off two-way radio”. Obey all signs and instructions.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and
instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling
areas such as gas stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using
liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such
as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your
vehicle’s engine.
SAFETY INFORMATION FOR FCC RF EXPOSURE
Warning! Read this information before using your phone.
In August 1996 the Federal Communications Commission (FCC) of the United States with its action in
Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency
electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards bodies. The design of this phone complies with
the FCC guidelines and these international standards.
BODY-WORN OPERATION
This device was tested for typical body-worn operations with the back of the phone kept 15 mm from the body.
130
SAFETY
To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories
that maintain a 15 mm separation distance between the user’s body and the back of the phone, including the
antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
For more information about RF exposure, please visit the FCC website at www.fcc.gov.
SAR INFORMATION
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO
RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the
emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of
the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the phone
*
transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined
at the highest certified power level, the actual SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the
power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower
the power output. Before a phone model is available for sale to the public, it must be tested and certified to the
FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The
tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for
each model.
The highest SAR value for this model phone when tested for use at the ear is 1.47 W/kg PCS CDMA Head SAR
and when worn on the body, as described in this user guide, is 0.809 W/kg PCS CDMA Body SAR. (Body-worn
131
SAFETY
measurements differ among phone models, depending upon available accessories and FCC requirements).
While there may be differences between the SAR levels of various phones and at various positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the
FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on O6Y-
PCS1450.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications &
Internet Association (CTIA) web-site at http://www.phonefacts.net.
In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in measurements.
*
FDA CONSUMER UPDATE
U.S. Food and Drug Administration Cell Phone Facts
Consumer Information on Wireless Phones
1. What kinds of phones are the subject of this update?
The term “wireless phone” refers here to handheld wireless phones with built-in antennas, often called “cell,”
“mobile,” or “PCS” phones. These types of wireless phones can expose the user to measurable radiofrequency
energy (RF) because of the short distance between the phone and the user’s head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA
and other federal health and safety agencies. When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance
from the source. The so-called "cordless phones," which have a base unit connected to the telephone wiring
in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC's
compliance limits.
132
SAFETY
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless
phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels
of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF
when in the standby mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure
to low level RF that does not produce heating effects causes no known adverse health effects. Many studies
of low level RF exposures have not found any biological effects. Some studies have suggested that some
biological effects may occur, but such findings have not been confirmed by additional research. In some cases,
other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent
results.
3 . What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones
before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard
and to repair, replace or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device
function; and
• Cooperate in providing users of wireless phones with the best possible information on possible effects of
wireless phone use on human health
FDA belongs to an interagency working group of the federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
133
SAFETY
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC).
All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure.
FCC relies on FDA and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations
operate at higher power than do the wireless phones themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this document.
4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have suffered from flaws
in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF)
exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in
other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of the studies that showed increased tumor
development used animals that had been genetically engineered or treated with cancer-causing chemicals so
as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless
phones, so we don’t know with certainty what the results of such studies mean for human health.
Three large epidemiology studies have been published since December 2000. Between them, the studies
investigated any possible association between the use of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However,
none of the studies can answer questions about long-term exposures, since the average period of phone use in
these studies was around three years.
134
SAFETY
5. What research is needed to decide whether RF exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years.
However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect
if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10
or more years’ follow-up may be needed to provide answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
6. What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world
to ensure that high priority animal studies are conducted to address important questions about the effects of
exposure to radiofrequency energy (RF).
FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of this work has been the development of a detailed
agenda of research needs that has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight,
obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is
conducted through contracts to independent investigators. The initial research will include both laboratory
studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional
research needs in the context of the latest research developments around the world.
7. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is--it is probably very small.
But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your
exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives,
135
SAFETY
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you could place more distance
between your body and the source of the RF, since the exposure level drops off dramatically with distance. For
example, you could use a headset and carry the wireless phone away from your body or use a wireless phone
connected to a remote antenna
Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about
the RF exposure from these products, you can use measures like those described above to reduce your RF
exposure from wireless phone use.
8. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would
apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that children be discouraged from using
wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such
a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes
brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly
precautionary; it was not based on scientific evidence that any health hazard exists.
9. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source
of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against
the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless
phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in compliance with the safety limit.
10. Do wireless phone accessories that claim to shield the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to
136
SAFETY
believe that accessories that claim to shield the head from those emissions reduce risks. Some products that
claim to shield the user from RF absorption use special phone cases, while others involve nothing more than
a metallic accessory attached to the phone. Studies have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone.
The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February
2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect
wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these
defendants lacked a reasonable basis to substantiate their claim.
11. What about wireless phone interference with medical equipment?
Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored
by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test
methods and performance requirements for hearing aids and wireless phones so that that no interference occurs
when a person uses a “compatible” phone and a “compatible” hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve
the problem.
Updated July 29, 2003
For more information, please visit the FDA website at http://www.fda.gov/cellphones.
137
SAFETY
EMERGENCY CALLS
Never rely solely upon your wireless phone for essential communications (e.g., medical emergencies), if it can
be avoided, since a wireless phone requires a complex combination of radio signals, relay stations and landline
networks for its operation. Consequently, emergency calls may not always be possible under all conditions
on all wireless phone systems. Your wireless phone, however, may sometimes be the only available means of
communication at the scene of an accident. When making an emergency call, always give the recipient all
necessary information as accurately as possible. Never terminate an emergency call until you have received
clearance to do so.
FCC ENHANCED 911 (E911) RULES
Background
The Federal Communications Commission (FCC) requires wireless carriers to transmit specific latitude and
longitude location (Automatic Location Identification = ALI) information as well as “911” calls to Public Safety
Answering Points (PSAPs) to identify the location of the caller in case of emergency.
Generally, the rules require that carriers identify an E911 caller’s location within 50 meters of the actual location
for 67 percent of calls and within 150 meters of the actual location for 95 percent of calls.
Super Slice’s ALI Capability.
The Super Slice is an ALI-capable phone equipped with a GPS (Global Positioning System) receiver supporting a
satellite-based GPS ALI-capable network to comply with the FCC’s ALI requirements.
The network compliance with the above FCC requirements is dependent on: (a) the use of digital technology
by the wireless network; (b) GPS satellite signals being able to reach the handset (such transmissions do not
always work indoors, for example) ; and (c) handset signals reaching wireless “base stations” (atmospheric and
environmental conditions may cause variations in handset receiving signal strength).
Also the transmission of the ALI information is subject, in part, to system constraints within the wireless
network to which the E911 signal is transmitted and over which UTStarcom has no control.
Finally, customers are advised that the Super Slice ALI capability is to be used for E911 purposes only.
This feature allows you to place an emergency call even if your phone is in “Phone Lock” or “Restrict” mode
138
SAFETY
when you dial the preprogrammed emergency number, 911, #911, or *911. It also operates in out-of-service
areas.
The phone maintains emergency mode until you press
after disconnecting an emergency call. In
emergency call mode, the phone can receive an incoming call from any available system.
To call "911" in "Phone Lock" or "Restrict" mode.
1. Enter
2. Press
,
,
.
. "911” and "Emergency" will appear on the screen.
COMPLIANCE WITH OTHER FCC REGULATIONS
OPERATING PROCEDURES
Never violate any of the following Rules and Regulations of the FCC when using your Cellular Phone. Such
violations are punishable by fine, imprisonment or both.
• Never use your Cellular Phone to send false distress calls.
• Never wiretap or otherwise intercept a phone call, unless you have first obtained the consent of the parties
participating in the call.
• Never make any anonymous calls to annoy, harass, or molest other people.
• Never charge another account without authorization, to avoid payment for service.
• Never willfully or maliciously interfere with any other radio communications.
• Never refuse to yield the line when informed that it is needed for an Emergency Call. Also, never take over a
line by stating falsely that it is needed for an emergency.
139
SAFETY
GENERAL SAFETY
PRECAUTIONS
Your Handheld Portable Telephone is a high quality piece of equipment. Before operating, read all instructions
and cautionary markings on the product, battery and adapter/charger.
Failure to follow the directions below could result in serious bodily injury and/or property damage due to battery
liquid leakage, fire or rupture.
•
DO NOT use or store this equipment in a place where it will be exposed to high temperatures, such as near an
open flame or heat-emitting equipment.
•
DO NOT drop your device or subject it to severe shock. When not using, lay down the unit to avoid possible
damage due to instability.
•
•
•
DO NOT expose this equipment to rain or spilled beverages.
DO NOT use unauthorized accessories.
DO NOT disassemble the phone or its accessories. If service or repair is required, return unit to an authorized
UT Starcom cellular service center. If unit is disassembled, the risk of electric shock or fire may result.
ANTENNA
ANTENNA SAFETY
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or
attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Please
contact your local dealer for replacement antenna.
Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a
minor burn may result. Please contact your local dealer for replacement antenna.
140
SAFETY
BATTERY
BATTERY SAFETY
Your device uses a removable and rechargeable lithium ion battery. Please contact customer service for
assistance should you need a replacement battery.
DOs
• Only use the battery and charger approved by the manufacturer.
• Only use the battery for its original purpose.
• Try to keep batteries in a temperature between 41°F (5°C) and 95°F (35°C).
• If the battery is stored in temperatures above or below the recommended range, give it time to warm up or
cool down before using.
• Completely drain the battery before recharging. It may take one to four days to completely drain.
• Store the discharged battery in a cool, dark, and dry place.
• Purchase a new battery when its operating time gradually decreases after fully charging.
• Properly dispose of the battery according to local regulations.
DON’Ts
• Don’t attempt to disassemble the battery – it is a sealed unit with no serviceable parts.
• Don’t expose the battery terminals to any other metal object (e.g., by carrying it in your pocket or purse with
other metallic objects such as coins, clips and pens). This can short circuit and critically damage the battery.
• Don’t leave the battery in hot or cold temps. Otherwise, it could significantly reduce the capacity and lifetime
of the battery.
• Don’t dispose of the battery into a fire.
141
SAFETY
Lithium ion batteries are recyclable. When you replace your built-in battery, please request the repair center to
recycle the battery in accordance with RBRC standards. When disposing of the battery by yourself, please call
RBRC at (800) 822-8837 for proper disposal tips.
Never touch any fluid that might leak from the built-in battery. Such liquid when in contact with the eyes or
skin, could cause injury to the skin or eyes. Should the liquid come into contact with the eyes, irrigate the eyes
thoroughly with clean water and immediately seek medical attention. In the event the liquid comes into contact
with the skin or clothing, wash it away immediately with clean water.
ADAPTER/CHARGER
CHARGER
The charger designed by UTStarcom for this unit requires the use of a standard 120 V AC power source for its
operation.
•
•
Never attempt to disassemble or repair a charger.
Never use a charger if it has a damaged or worn power cord or plug. Always contact a UTStarcom authorized
service center, if repair or replacement is required.
•
•
Never alter the AC cord or plug on your charger. If the plug will not fit into the available outlet, have a proper
outlet installed by a qualified electrician.
Never allow any liquids or water to spill on the charger when it is connected to an AC power source. Always
use the authorized UTStarcom charger to avoid any risk of bodily injury or damage to your cellular phone or
battery.
•
Never attempt to connect or disconnect the charger with wet hands. Always unplug the charger from the
power source before attempting any cleaning. Always use a soft cloth dampened with water to clean the
equipment, after it has been unplugged.
Handling the cord on this product or cords associated with accessories sold with this product, will expose you to
142
SAFETY
lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands
after handling. Always disconnect the charger from the power source when it is not in use.
RECYCLE YOUR CELL PHONE!
Carriers marketing this cell phone have an in-store phone take-back program. Consumers can drop off their
used wireless devices to specified carrier retail outlets for recycling purposes. For a list of carrier members and
collection sites, visit the cellular industry’s recycling website www.recyclewirelessphones.com.
To mail in your old wireless device to UTStarcom Personal Communications for recycling purposes, simply
package your old wireless device and any accessories (including discharged batteries) in appropriate shipping
materials and mail to:
For Recycling UTStarcom Personal Communications LLC 555 Wireless Blvd. Hauppauge, NY 11788
®
®
Wireless phones also can be donated to the Wireless Foundation’s DONATE A PHONE CALL TO PROTECT
campaign. This charitable cause collects wireless phones to benefit victims of domestic violence. All donated
phones are tax deductible. You may mail the phone to:
CALL TO PROTECT2555 Bishop Circle WestDexter, MI 48130 -OR-
Drop the phone off at a local collection center. For a list of collection centers, visit www.wirelessfoundation.
org/CalltoProtect/dropoff.cfm
© 2007 UTStarcom Personal Communications LLC. All rights reserved. UTStarcom is a registered trademark and the UTStarcom
logo is a trademark of UTStarcom, Inc. and its subsidiaries.
VIRGIN and the Virgin Signature logo are registered trademarks of Virgin Enterprises Limited and are used under license.
Bluetooth is a trademark of Bluetooth SIG, Inc. Trademarks are owned by Bluetooth SIG, Inc. All other trademarks are the
property of their respective owners.
143
SAFETY
FCC HEARING-AID COMPATIBILITY (HAC) REGULATIONS
FOR WIRELESS DEVICES
THIS PHONE HAS A HAC RATING OF M3
On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-309
modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to require
digital wireless phones be compatible with hearing-aids. The intent of the HAC Act is to ensure reasonable
access to telecommunications services for persons with hearing disabilities.
While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users
may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system for wireless phones to assist hearing device
users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones
that are rated have the rating on their box or a label located on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your
hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully.
Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to
hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.
Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help
you find this rating. Higher ratings mean that the hearing device is relatively immune to interference noise. The
hearing aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for
normal use. A sum of 6 is considered for best use.
144
SAFETY
In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level
rating, the sum of the two values equal M5. This should provide the hearing aid user with “normal usage” while
using their hearing aid with the particular wireless phone. “Normal usage” in this context is defined as a signal
quality that is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the
UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions
(ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement
procedure are described in the American National Standards Institute (ANSI) C63.19 standard.
For information about hearing aids and digital wireless phones
Fcc Hearing Aid Compatibility and Volume Control
http://www.fcc.gov/cgb/dro/hearing.html
Gallaudet University, RERC
http://tap.gallaudet.edu/DigWireless.KS/DigWireless.html
Self Help for Hard of Hearing People Inc. [SHHH]
ww.hearingloss.org/hat/TipsWirelessPhones.htm
The Hearing Aid Compatibility FCC Order
http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-168A1.pdf
145
SAFETY
FCC COMPLIANCE INFORMATION
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
INFORMATION TO USER
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ tv technician for help.
CAUTION: The user who makes changes or modifications to the unit without the express approval by the
manufacturer will void user authority to operate the equipment.
146
MEMO
147
MEMO
148
|