6
AUTOMATIC SHREDDER
KH4407
AUTOMATIC SHREDDER
Operating instructions
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
ID-Nr.: KH4407-01/09-V2
CONTENT
PAGE
Intended Use
2
2
3
3
3
3
3
4
5
5
5
6
6
Important safety instructions
Technical data
Items supplied
Appliance description
Commissioning
Operation
Emptying the waste container
Cleaning
Disposal
Warranty & Service
Importer
Troubleshooting
Read these operating instructions carefully before using the appliance for the first time and preserve this
maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.
- 1 -
PAPER SHREDDER
KH 4407
To avoid the risk of personal injury:
• The Shredder should be used by only one per-
son at a time.
• Never leave the appliance unsupervised during
use.
Intended Use
• Keep loose clothing
, long hair
and jewel-
This Shredder is intended exclusively for the
shredding of paper, credit cards and CD’s.
All other usages or modifications are regarded
as contrary to the operating instructions and
contain a considerable risk of accidents.
lery etc well away from the cutter opening.
• NEVER place your fingers into the cutter opening
.
• NEVER place a finger into the central hole of a
CD when you are feeding it into the appliance.
• Keep pets away from the appliance. They could
injure themselves.
ƽ Important safety instructions
• This appliance is not intended for use by individuals
(including children) with restricted physical,
physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• The packaging material can be a source of dan-
ger for children. Dispose of the material immedi-
ately after unpacking or keep it in a safe place
not accessible to children.
The following safety instructions must always be
complied with when using electrical appliances:
• Do not place the appliance in close vicinity to
sources of heat and water source .
• Do not use the appliance close to inflammable
or explosive materials and/or ignitable gases
or in dusty environments.
• Do not use the appliance outdoors.
To avoid potentially fatal electric
shocks:
• Lay the power cable in such a way that no one
can tread on or trip over it.
• Should the power cable or the plug become
damaged, arrange for it/them to be repaired
by authorised specialists or Customer Services
as soon as possible.
• Arrange for damaged or malfunctioning applian-
ces to be inspected and/or repaired by a quali-
fied specialist or the Customer Service Depart-
ment as soon as possible.
• Do not expose the appliance to rain and never
use it in a humid or wet environment.
• Ensure that the power cable never becomes
moist or wet during operation.
- 2 -
Tips for safety:
Appliance description
• Place the appliance in the immediate vicinity of
an electrical power socket. Do not use an exten-
sion cable. Ensure that the appliance and the po-
wer socket are easily and quickly accessible in
the event of an emergency.
Cutter attachment
q
w
e
r
t
y
u
Switch
Cutter opening for CD/Credit cards
Cutter opening for paper
Large waste receptacle (Paper)
Power cable
• Never overburden the appliance. The paper
shredder is designed for brief operating
periods.
• In cases of danger, immediately remove the elec-
trical plug from the socket.
Small waste receptacle (transparent) /
Viewing window
• NEVER use the shredder for tasks for which it
was not designed.
• Always be attentive! Always pay attention to
what you are doing and act with common
sense. Never use the appliance when you are
distracted or don’t feel well.
Commissioning
• First of all, place the cutter attachment
onto
so that the power
q
the large waste receptacle
t
cable
side.
is located at the rear, i.e. on the closed
y
• Slide the small waste receptacle
for plastics
u
Technical data
in the opening on the front side of the large wa-
ste receptacle
.
t
Mains voltage:
Nominal current: 1,8 A
Rated output: 380 W
220-240 V 50Hz
• Connect the paper shredder to a power socket.
~
Protection class: II
Cutting process
Operation
for Paper:
Crosscut, 4x18 mm particles
Switching the appliance on:
Working width: 223 mm
• Place the switch
shredding.
to the position
for
w
CO Time:
3 minutes
CO Time
Inserting paper:
The C.O. Time (Continuous Operation) details how
long an appliance may be used without the motor
overheating and being damaged. After the appliance
has run for for this period it must be switched off until
the motor has cooled itself down.
• Insert paper from above and in portrait format
into the cutter opening for paper
.
r
The motor starts automatically and switches itself off
automatically if no further paper is inserted. You
can shred up to 7 sheets (80g/m2 paper) at the
same time.
Items supplied
Shredder KH 4407
Operating Instructions
- 3 -
Inserting credit cards:
• Open the safety flap over the cutter opening for
Emptying the waste container
CD/Credit cards
.
• Empty the waste container
/
regularly.
e
t u
• Insert the credit card from above into the middle
• Dispose of the waste material in an environmen-
tally responsible manner.
of the CD/Credit card cutter opening . You
e
can only shred one credit card at a time. ALWAYS
insert them into the CD/Credit card cutter opening
Emptying the large waste container
(Paper)
with the broad side leading. If you do not,
e
the magnetic strip will not be destroyed.
ƽ Important: Remove the power plug from the
wall socket to avoid an unintended starting of the
appliance.
ꢀ Note: Always insert the credit card into the
middle of the cutter opening . If you do not,
e
the shredding process will not start!
• Remove the cutter attachment
from the large
q
Inserting a CD:
• Insert the CD from above into the middle of the
waste container
• Remove the small waste container
.
t
at the front
u
CD/Credit card cutter opening . You can only
of the large waste container , so that it does
e
t
shred one CD at a time.
not fall out.
• Empty the large waste container
everything back together again.
and then put
t
ƽ Warning!: NEVER place a finger into the cen-
tral hole of a CD when you are feeding it into
the appliance.
Emptying the small waste container (Plastic)
Clearing a material blockage:
• Remove the small waste container
front of the large waste container
• Replace it after emptying it.
from the
to empty it.
u
t
• Press and hold the switch in position should
w
the item to be shredded become jammed.
The appliance now goes into reverse and the
material to be shredded is returned.
Notice regarding overheating of the
appliance:
• Place the switch
into position
(OFF) as
w
soon as the jammed item is returned.
If it overheats, the appliance switches itself off
automatically.
Switching the appliance off:
• To switch the appliance off, move the switch
ƽ Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance.
w
into the middle position
(OFF).
• To switch the appliance off, move the switch
w
into the middle position
(OFF).
• Empty the waste containers
/
.
t u
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
w
is placed in the position
.
- 4 -
Cleaning
Warranty & Service
ƽ Danger! Always remove the power plug
before cleaning the appliance. There is a
risk of electric shock!
The warranty for this appliance is for 3 years from
the date of purchase. This appliance has been
manufactured with care and meticulously examined
before delivery. Please retain your receipt as proof
of purchase date. Should a claim need to be made
under the warranty, please make contact by tele-
phone with our service department. Only in this
way can a post-free despatch for your goods be as-
sured.
ƽ Warning!! The cutters in the appliance are
very sharp! Risk of personal injury!
• Empty the waste containers
• Clean the waste containers
/
regularly.
and the cutter
t u
/
t u
attachment
and, if required, with a mild detergent.
• Remove possible residues in the cutter openings
with a lightly moistened cloth
The warranty covers ONLY claims for material and
maufacturing defects, not for wearing or consuma-
ble or for damage to fragile components. This pro-
duct is for private use only and is not intended for
commercial applications.
q
/
with a suitable object. Ensure that the appli-
e r
ance is unplugged before commencing this!
The warranty will become void in the event of abusi-
ve and improper handling, use of force and internal
tampering not carried or approved by our authori-
zed service branch. Your statutory rights are not
restricted in any way by this warranty.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
DES Ltd
Units 14-15
Bilston Industrial Estate
Oxford Street
Bilston
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
WV14 7EG
Tel.: 0870/787-6177
Fax: 0870/787-6168
e-mail: [email protected]
Dispose of all packaging materials in an
environmentally responsible manner.
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: [email protected]
- 5 -
Importer
If the appliance doesn`t allow itself to be
switched on:
KOMPERNASS GMBH
BURGSTRASSE 21
• Check that the plug is correctly connected to a
wall socket.
44867 BOCHUM, GERMANY
• Try out a different wall socket.
• The appliance is probably defective. Have the
appliance checked by qualified specialists.
When the appliance is switched on,
however, the shredding process will not start:
• The appliance has overheated and triggered the
automatic safety switch-off.
Troubleshooting
If the material to be shredded jams:
This means that you have attempted to feed too
much material into the appliance
(max. 7 sheets 80g/m2 paper, max. 1 credit card,
max. 1 CD/DVD).
ƽ Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance.
• Place the switch
in position should the item
w
to be shredded become jammed. The appliance
now goes into reverse and the material to be
shredded is returned.
• To switch the appliance off, move the switch
w
into the middle position
(OFF).
• Allow the appliance to cool down.
• Place the switch
in position
(OFF), as
• Replace the power plug into the socket.
• Switch the appliance on, in that the switch
w
soon as the jammed item is returned.
w
is placed in the position
.
If the appliance suddenly ceases operation:
This means that the appliance has overheated and
the automatic safety cut-out has activated itself.
The cutter attachment is not correctly placed.
q
• Place the cutting attachment
in the correct
q
position.
ƽ Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance
• To switch the appliance off, move the switch
w
into the middle position
(OFF).
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
w
is placed in the position
.
- 6 -
|