IMPRESSA F50/F5/F505
Instructions for use
8/06
Fig. 1
Fig. 2
Fig. 7
Fig. 12
Fig.17
Fig. 3
Fig. 8
Fig. 13
Fig. 4
Fig. 9
Fig. 14
Fig. 5
Fig. 6
Fig. 10
Fig. 11
Fig. 15
Fig. 16
Control elements
11 22
1. Rotary Switch
2. Illuminated ring
13
3. ON/OFF key
4. Programming key
5. Draw-off key 1 cup
Rotary Switch
6. Draw-off key 2 cups
12
13
7. Maintenance key
8. Steam pre-selection key
9. Display dialog system
10. Water tank with carrying handle
11. Filler funnel for pre-ground coffee:
12. Bean tank cover
10
8
7
6
5
3 4
9
2
14
1
13. Aroma preservation cover
14. Steam/hot water draw-off valve
15. Easy-Auto-Cappuccino Frother with milk pipe
16. Interchangeable hot water nozzle (see Fig. 5)
17. Height-adjustable coffee spout
18. Coffee grounds container
19. Drip grate
15/16
17
18
21
20. Drip tray
21. Power Switch
22. Metal shelf
19
20
Contents
1. Safety information..........................................page
6
6
6
6
6
6
7
7
7
7
7
8
9
9
9
15.1 Programming the filter ...........................page 15
15.2 Programming the water hardness ..............page 15
15.3 Programming the aroma ROBUST
1.1
1.2
Warning..............................................page
Precautions..........................................page
2. Preparing the IMPRESSA................................page
or STANDARD .....................................page 15
E
2.1
2.2
2.3
2.4
2.5
2.6
Check supply voltage..............................page
Check electrical fuse ..............................page
Fill water tank......................................page
Fill coffee beans....................................page
Adjusting the grinding gear .....................page
Power switch........................................page
15.4 Programming the temperature..................page 16
15.5 Programming the time............................page 16
15.6 Programming the automatic
switch-on time ......................................page 17
15.7 Programming the automatic
switch-off time......................................page 17
3. First use.......................................................page
4. Adjusting the water hardness ............................page
5. Installation of CLARIS plus filter cartridges ........page
15.8 Cup counter .........................................page 18
15.9 Programming the language......................page 18
15.10 Programming Display 24H/AM/PM ...........page 18
15.11 Programming the display for ML/OZ..........page 19
16. Maintenance .................................................page 19
16.1 Filling in water.....................................page 19
16.2 Emptying the coffee grounds container .......page 19
16.3 Drip tray missing...................................page 20
16.4 Fill coffee beans....................................page 20
16.5 Replacing the filter................................page 20
16.6 Cleaning the IMPRESSA ........................page 20
16.7 IMPRESSA decalcify.............................page 20
16.8 General cleaning instructions ...................page 20
16.9 Emptying the system ..............................page 21
17. Cleaning.......................................................page 21
18. De-scaling.....................................................page 22
19. Disposal .......................................................page 23
20. Tips for perfect coffee .....................................page 23
21. Messages......................................................page 24
22. Problems......................................................page 25
23. Legal information...........................................page 26
24. Technical Data...............................................page 26
5.1
5.2
Installing the filter ................................page
Replacing the filter................................page
6. Rinsing the IMPRESSA...................................page 10
7. Adjusting the water quantity for coffee................page 10
8. Drawing off 1 cup of coffee ..............................page 10
9. Drawing off 2 cups of coffee .............................page 11
10. Drawing off pre-ground coffee ...........................page 11
11. Drawing off hot water .....................................page 12
12. Drawing off steam ..........................................page 12
13. Dispensing Cappuccino with the
Easy-Auto-Cappuccino Frother ..........................page 13
13.1 Cleaning the Easy-Auto-Cappuccino
Frother ...............................................page 14
13.2 Rinsing the Easy-Auto-Cappuccino
Frother ...............................................page 14
13.3 Cleaning the Easy-Auto-Cappuccino
Frother ...............................................page 14
14. Switching off the IMPRESSA ...........................page 15
15. Programming ................................................page 15
5
Introduction
1.2 Precautions
Ⅲ Never expose the coffee machine to weather (rain, snow, frost),
never touch the machine when your hands are wet.
Thank you for purchasing the IMPRESSA. To ensure perfect func-
tioning of your IMPRESSA, carefully read this operating manual
and keep it for future reference.
Should you need more information or if you encounter particular
problems not specified in these operating instructions in sufficient
detail, either contact us directly or contact your local authorized
dealer.
Ⅲ Place the IMPRESSA on a firm, level base that is resistant to
any water that may leak. Never stand on hot or warm surfaces
(oven hobs). Keep out of the reach of children.
Ⅲ If you don’t use the machine for a longer time (holidays, etc.)
always disconnect the mains cable.
Ⅲ Always disconnect mains cable before cleaning the machine.
You will also find useful tips on operation and maintenance
Don’t forget to check out the Knowledge Builder our ani-
mated operating instructions. LEO, our assistant, will take
you through all the functions.
Ⅲ When disconnecting the mains cable never pull on the mains
cable or the machine itself.
Ⅲ The coffee machine is connected to mains supply via a mains
cable. Make sure nobody can trip over the mains cable. Make
sure children and pets cannot reach the machine
Ⅲ Never put the coffee machine or individual parts of it into a
dishwasher.
Ⅲ Make sure to install the machine at a place with sufficient air
circulation, to prevent overheating of the machine.
1. Safety information
1.1 Warning
2. Preparing the IMPRESSA
2.1 Check supply voltage
Ⅲ Children do not realize the dangers involved in using electric
appliances, for this reason always keep an eye on children when
they use electric appliances.
The IMPRESSA is preset in the factory to the correct mains
voltage. Check if your local mains supply voltage complies with
the information given on the type plate on the underside of the
IMPRESSA.
Ⅲ The coffee machine may only be used by instructed persons.
Ⅲ Never use a defective coffee machine or a machine with a
defective mains cable.
Ⅲ Never repair or open the coffee machine yourself. Any repairs
may only be carried out by authorized service shops using ori-
ginal spare parts and accessories.
2.2 Check electrical fuse
The IMPRESSA is designed for an electric current of 10 amperes.
Check if the electrical fuse has sufficient capacity.
Ⅲ Never immerse the coffee machine in water.
6
Ⅲ Open the bean tank cover (12) and remove the aroma preser-
vation cover (13).
2.3 Fill water tank
Only use fresh, cold water. Never fill in milk, mineral water
or other liquids.
Ⅲ To adjust the grinding degree, turn the Rotary Switch (Fig. 2) to
the required position.
Ⅲ Remove the water tank and rinse it with cold tap water
thoroughly (Fig. 4).
2.6 Power switch
E
Ⅲ Then fill the water tank and reinstall it. Make sure to install the
tank properly, it must engage audibly.
Actuate the power switch (21) on your IMPRESSA before
using the machine for the first time.
We recommend that you switch off your IMPRESSA with
the power switch (21) if you intend not to use the machine
for longer periods of time (e.g.during holidays)
2.4 Fill coffee beans
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your JURA coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding
gear. Any repair costs resulting from the use of such blends
are not covered by warranty.
3. First use
Ⅲ Fill coffee beans in the bean tank (12).
Ⅲ Switch on the IMPRESSA using the ON/OFF key
(3).
Ⅲ
SPRACHE
DEUTSCH
Ⅲ Open the bean tank cover (12) and remove the aroma preser-
vation cover (13).
Ⅲ The illuminated ring (2) is active.
Ⅲ Remove any dirt or foreign matter from the bean tank.
Ⅲ Turn the Rotary Switch (1) until the required language is dis-
played.
Ⅲ Fill coffee beans in the bean tank and close the cover.
Ⅲ For example
LANGUAGE
ENGLISH
2.5 Adjusting the grinding gear
Ⅲ Confirm your selection by pressing the Rotary Switch (1).
You can adjust the grinding gear to the roast of your coffee. We
recommend
Ⅲ
FILL
WATER
a fine grinding degree Ǟ for bright roasts (the smaller the dots,
Ⅲ Fill the water tank (10) with fresh water.
OPEN TAP
the finer the grinding)
a coarse degree
Ǟ
for dark roasts (the larger the dots, the
coarser the grinding)
Ⅲ
Ⅲ Place a receptacle under Easy-Auto-Cappuccino Frother (15)
(Fig. 10).
The grinding degree may only be adjusted while the grinding
gear is running.
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 13).
7
The displayed information means the following:
LEVEL –– Water hardness function switched off
Ⅲ
Ⅲ
FILLING
SYSTEM
CLOSE TAP
LEVEL 1 German water hardness degree 1 to 7°
French Water hardness degree 1.79 – 12.53°
Ⅲ Close the steam / hot water draw-off tap (14).
LEVEL 2 German water hardness degree 8 to 15°
French Water hardness degree 14.32 – 26.85°
Ⅲ
Ⅲ
HEATING
PRESS
RINSE
LEVEL 3 German water hardness degree 16 to 23°
French Water hardness degree 28.64 – 41.14°
Ⅲ Press the maintenance key
(7).
LEVEL 4 German water hardness degree 24 to 30°
French Water hardness degree 42.96 – 53.7°
Ⅲ Machine carries out a rinsing operation.
Ⅲ
Ⅲ
RINSING
READY
When the IMPRESSA leaves the factory it is adjusted to LEVEL 3.
You can adjust another hardness. To do this, proceed as follows:
If BEANS FILL is displayed, press the coffee draw-off key
again. Machine not filled with coffee beans yet.
Ⅲ
READY
Ⅲ Press the programming key
FILTER
(4), illuminated ring (2) is active.
To get an excellent crema, adjust the coffee spout (17) to the
size of your cup (Fig. 3).
Ⅲ
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
played:
4. Adjusting the water hardness
Ⅲ
HARDNESS
Ⅲ Now press the Rotary Switch (1) to start the programming.
LEVEL 3
Ⅲ Turn the Rotary Switch (1) until the required level is displayed.
Ⅲ For example, LEVEL 4
Ⅲ Press the Rotary Switch (1) to confirm the required level.
HARDNESS
Water is heated in the IMPRESSA. As a result, calcification
occurs during normal use and is indicated automatically.
Before using the IMPRESSA for the first time the hardness
of the water used must be adjusted. Use the supplied test
sticks for this.
Ⅲ
1° German hardness is equivalent to 1.79° French hardness.
Ⅲ
Ⅲ Press the programming key
mode.
(4) to quit the programming
If the filter is activated, the program step Water Hardness no
longer appears.
Ⅲ
READY
The IMPRESSA has 5 hardness degrees which can be used
and are displayed while you are adjusting the water hardness.
8
Ⅲ Close the steam/hot water draw-off tap (14), now the IM-
PRESSA will heat up to coffee temperature.
5. Installation of CLARIS plus filter cartridges
If the CLARIS plus filter cartridge is installed properly, de-
scaling of the coffee machine is no longer required. For
more information on the CLARIS plus filter cartridge refer
to brochure «CLARIS plus. Hard on limescale. Gentle on
your coffee machine.»
Ⅲ
Ⅲ
HEATING
READY
Now you have activated the filter. In Programming Mode the
water hardness selection function is no longer displayed.
E
5.1 Installing the filter
5.2 Replacing the filter
Ⅲ Fold up the cartridge holder. Install the filter cartridge in the
After drawing off approx. 50 litres, the filter cartridge will be
used up. A message requesting you to replace the filter will
appear on the display. Please monitor the period of use of the
CLARIS plus filter cartridge (max. 2 months) using the scale
on the cartridge holder by the water tank.
water tank, applying a gentle pressure (Fig. 1).
Ⅲ Fold down the cartridge holder again until it engages audibly.
Ⅲ Fill the water tank with cold, fresh tap water and install it again.
Ⅲ Press the programming key
(4), the illuminated ring (2) is
active.
Ⅲ
READY/FILTER
Ⅲ
FILTER
Ⅲ Press the Rotary Switch (1) to start the programming.
NO –
Ⅲ Switch off the IMPRESSA using the ON/OFF key
(3).
(7) until the following message is
Ⅲ Press the maintenance key
Ⅲ
displayed:
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
Ⅲ
CHG FILTER
OPEN TAP
played:
Ⅲ
YES
ߛ Ⅲ Remove the water tank from the machine and empty it.
Ⅲ Press the Rotary Switch (1) to activate the filter cartridge.
Ⅲ Fold up the cartridge holder. Install the filter cartridge in the
Ⅲ
INSERT
OPEN TAP
water tank, applying a gentle pressure (Fig. 1).
Ⅲ Fold down the cartridge holder again until it engages audibly.
Ⅲ Put a sufficiently large container (at least 0.5 litre) under the
Ⅲ Fill the water tank with cold, fresh tap water and reinstall it.
Easy-Auto-Cappuccino Frother (15) (Fig. 10).
Ⅲ Place a sufficiently large jug (approx 1 litre) under the Easy-
Auto-Cappuccino Frother (15) (Fig. 10) and open the steam/hot
water tap (14).
Ⅲ If not installed already, insert the CLARIS plus filter.
Ⅲ Open the steam / hot water draw-off tap (14) (Fig.13).
Ⅲ
RINSING
FILTER
Ⅲ
RINSING
FILTER
Ⅲ
CLOSE TAP
Ⅲ
CLOSE TAP
9
Ⅲ Open the steam / hot water draw-off tap (14).
Ⅲ Turn the Rotary Switch (1) until the required water quantity is
displayed.
Ⅲ
Ⅲ
HEATING
READY
Ⅲ For example,
120 ML
8. Drawing off 1 cup of coffee
6. Rinsing the IMPRESSA
You have the possibility of increasing the strength of the
coffee at any time in the grinding process by pressing the
When the IMPRESSA is switched off and has cooled down,
a rinsing operation is started when the machine is switched
on again. When the machine is switched off, a rinsing oper-
ation is started automatically.
1-cup draw-off key
again
For Example: by pressing the 1-cup draw-off key
times you get strong coffee.
STRONG
three
Ⅲ Switch on the IMPRESSA using the ON/OFF key
(3).
Ⅲ
Ⅲ
HEATING
You can choose among three strengths at the push of a but-
ton. The longer you press the draw-off key for 1 cup (5),
the stronger your coffee will be (Display: MILD/ NORMAL/
STRONG).
PRESS
RINSE
Ⅲ Press the maintenance key
(7).
Ⅲ
Ⅲ
RINSING
READY
You can adjust the water quantity before the draw-off opera-
tion using the Rotary Switch (1).
You can stop the draw-off operation at any time by pressing
any coffee draw-off key.
7. Adjusting the water quantity for coffee
The indicated value in ML is a reference value and may
deviate from the actual value
You can check the water quantity used for the last draw-off
operation by pressing the Rotary Switch (1).
If you press the draw-off key for 2 cups
quantity is doubled automatically.
(6) the water
Ⅲ
READY
Ⅲ Put a cup under the adjustable coffee spout (17).
You can change/stop the water quantity during the draw-off
operation, too. Turn the Rotary Switch (1) until the required
ML value is displayed.
Ⅲ Press the draw-off key for 1 cup
strength is displayed:
(5) until the required
Ⅲ
Ⅲ
MILD
180 ML (water quantity last adjusted)
You can adjust the water quantity in steps of 5 ML using the
Rotary Switch (1).
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) again to select the water quantity
individually:
Ⅲ
READY
10
10. Drawing off pre-ground coffee
Ⅲ For Example:
160 ML
MILD
Ⅲ For Example:
Never use instant coffee or quick-coffee. We recommend
that you always use powder from fresh coffee beans or, pre-
ground, vacuum-packed coffee. Never fill in more than 2
portions of powder. The pre-ground coffee tank is no storage
tank. Make sure that the pre-ground you use is not too fine.
This may cause blocking of the system. In this case the
coffee only drips out of the coffee spout.
Ⅲ Your product is being prepared.
READY
Ⅲ
9. Drawing off 2 cups of coffee
E
Selecting the coffee strength is not possible when drawing
off 2 cups of coffee. You will draw off 2 mild cups auto-
matically.
If you have filled in too little powder, the message ADD
MORE POWDER will be displayed. The IMPRESSA stops
the operation and returns to "ready for draw off" mode.
You can adjust the water quantity before the draw-off ope-
ration using the Rotary Switch (1). The adjusted value (ML)
refers to 1 cup.
You can stop the draw-off operation at any time by pressing
any coffee draw-off key.
You can stop the draw-off operation at any time by pressing
any coffee draw-off key.
Ⅲ
READY
You can check the water quantity used for the last draw-off
operation by pressing the Rotary Switch (1).
Ⅲ Put 1 or 2 cups under the adjustable coffee spout (17).
Ⅲ Open the cover of the filler funnel for pre-ground coffee (11).
Ⅲ
FILL
POWDER
Ⅲ
READY
Ⅲ Put 2 cups under the adjustable coffee spout (17).
Ⅲ Press the draw-off key for 2 cups (6).
Ⅲ Fill 1 or 2 level spoonfuls of pre-ground coffee in the filler
funnel for pre-ground coffee (11) (Fig. 11) and close the cover.
Ⅲ
Ⅲ
2 CUPS
120 ML (water quantity last adjusted)
Ⅲ
Ⅲ
POWDER
SELECT
CUP BUTTON
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) again to select the water quantity
individually:
Ⅲ Press the required draw-off key for 1 cup
(6)
(5) or 2 cups
Ⅲ For Example:
2 CUPS
Ⅲ Your product is being prepared.
READY
210 ML
Ⅲ
120 ML (water quantity last adjusted)
Ⅲ The illuminated ring (2) is active.
POWDER
Ⅲ
Ⅲ
Ⅲ
Ⅲ Turn the Rotary Switch (1) again to select the water quantity
individually:
11
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ For Example:
POWDER
Ⅲ Your product is being prepared.
READY
210 ML
Ⅲ
READY
Ⅲ
Before CLOSE TAP water may still escape the system.
Ⅲ
11. Drawing off hot water
12. Drawing off steam
If you do not change the settings using the Rotary Switch
(1), the water quantity last adjusted will be drawn off auto-
matically.
The steam function is used for the preparation of milk foam
as well as for the Easy-Auto-Cappuccino Frother (15) clean-
ing programme.
Install the hot water nozzle (see Fig. 5 ) to obtain perfect
water flow. Do not replace the replaceable hot water nozzle
(16) directly after drawing off water, because the nozzle is
hot after the draw-off operation.
With the optionally available 2-stage frothing nozzle, liquids
can be heated and frothed using the steam function.
Make sure that the nozzle is correctly fitted when drawing
steam. If the nozzle becomes blocked with particles of milk
residue or is incorrectly assembled, a danger can arise during
use whereby the nozzle may jump off.
At the start of the water draw-off operation there can be
splashing Avoid direct contact with the skin!
Ⅲ
READY
Due to the system design, some water will escape at first
when steam is drawn. However, this will not affect the result
in any way.
Ⅲ Place a cup under the replaceable hot water nozzle (16).
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 13).
Ⅲ The illuminated ring (2) is active.
When drawing steam, spluttering can occur at the start. The
nozzle becomes hot in use. Avoid any direct skin contact.
Ⅲ For example,
WATER
140 ML
Ⅲ
Ⅲ
READY
Ⅲ Adjust the required water quantity by turning the Rotary Switch
Ⅲ Press the steam pre-selection key
(8).
(1).
Ⅲ
Ⅲ
HEATING
Ⅲ For example,
WATER
200 ML
STEAM
READY
Ⅲ
Ⅲ If the required water quantity is reached, the following message
is displayed:
Ⅲ To draw off steam, open the steam/hot water draw-off tap (14)
(Fig. 13).
Ⅲ
CLOSE TAP
Ⅲ The illuminated ring (2) is active.
12
Ⅲ You can adjust the steam draw-off time individually by turning
the Rotary Switch (1) until the required SEC are displayed.
Ⅲ When using for the first time, remove the protective cover from
the Easy-Auto-Cappuccino Frother (15) (Fig. 6). The protective
cover is used only during transport as protection to prevent the
ingress of contaminated materials.
Ⅲ For example,
35 SEC
Ⅲ If you do not change the steam draw-off time settings using the
Rotary Switch (1), the machine will use the settings last adjusted
Ⅲ Remove the milk pipe from the Welcome Pack and connect it to
the Easy-Auto-Cappuccino Frother (15).
E
Ⅲ During the steam draw-off operation, the message STEAM is
displayed
Ⅲ Insert the other end of the milk pipe into a Tetra Pak of milk or
connect it to a milk container (Fig. 7).
Ⅲ When the steam quantity is reached, the message CLOSE TAP is
displayed
Ⅲ Place a cup under the Easy-Auto-Cappuccino Frother (15)
(Fig. 7).
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ
STEAM
READY
A useful addition is available for all lovers of milk speciali-
ties in the form of high-quality vacuum milk containers.
They keep the milk cool the whole day long and are opti-
mally suited to the design of your IMPRESSA.
All original JURA accessories can be obtained from the
specialist shop.
As long as STEAM READY is on view in the display, the
machine is ready to dispense steam.
Before CLOSE TAP, steam may still escape the system.
Ⅲ Press the steam pre-selection key
(8).
Ⅲ
Ⅲ
HEATING
13. Dispensing Cappuccino with the
Easy-Auto-Cappuccino Frother
STEAM
READY
Ⅲ To draw off steam open the steam/hot water draw-off tap (14)
(Fig. 13). The milkfoam is prepared.
Cappuccino comprises of one third each of Espresso, hot
milk and milk foam. You produce the milk portion with the
Easy-Auto-Cappuccino Frother (15).
When steam is drawn, a vacuum is produced which, with the
aid of the Easy-Auto-Cappuccino Frother (15), draws in the
milk and produces milk foam.
Ⅲ The illuminated ring (2) is active.
Ⅲ You can adjust the steam draw-off time individually by turning
the Rotary Switch (1) until the required SEC are displayed.
Ⅲ For example,
35 SEC
To ensure perfect function, the Easy-Auto-Cappuccino
Frother (15) must be cleaned regularly.
Ⅲ If you do not change the steam draw-off time settings using the
Rotary Switch (1), the machine will use the settings last adjusted
Make sure that the nozzle is correctly fitted. If the nozzle be-
comes blocked with particles of milk residue or is incorrectly
assembled, a danger can arise during use whereby the nozzle
may jump off.
Adjust the steam dispensing time to suit the size of your
cup.
13
Ⅲ During the steam draw-off operation, the message STEAM is
Ⅲ Reassemble the Easy-Auto-Cappuccino Frother (15) and refit it
displayed.
on to your IMPRESSA.
Ⅲ When the steam quantity is reached, the message CLOSE TAP is
displayed.
13.3 Cleaning the Easy-Auto-Cappuccino Frother
Ⅲ Close the steam / hot water draw-off tap (14).
To ensure that the Easy-Auto-Cappuccino Frother(15) func-
tions perfectly, you should clean it daily if you have prepared
milk foam.
Ⅲ
STEAM
READY
At any time, you can stop dispensing steam at an earlier
stage by closing the tap for dispensing steam/hot water (14).
You will not be prompted by your IMPRESSA to clean the
Easy-Auto-Cappuccino Frother (15).
As long as STEAM READY is on view in the display, the
machine is ready to dispense steam.
You can obtain the JURA Auto-Cappuccino Cleaner from
the specialist shop.
Due to the system design, steam can still escape and some
milk may continue to drip before the TAP is closed.
Ⅲ Place a container under the Easy-Auto-Cappuccino Frother (15).
(Fig. 9)
Ⅲ Fill a second container with 2.5 dl of fresh water and add one
capful of the Auto-Cappuccino Cleaner.
Ⅲ Now, move your cup with the milk foam and place it under the
coffee spout and dispense the required coffee product. (Fig. 8)
Your Cappuccino is ready.
Ⅲ Dip the milk pipe into the second container with the Auto-Cap-
puccino Cleaner. (Fig. 9)
Ⅲ Press the steam pre-selection key
(8).
13.1 Cleaning the Easy-Auto-Cappuccino Frother
Ⅲ
Ⅲ
HEATING
To ensure that the Easy-Auto-Cappuccino Frother functions
perfectly, you should rinse it with water each time after
preparing milk.
STEAM
READY
Ⅲ To draw off steam open the steam / hot water draw-off tap (14)
(Fig 13).
You will not be prompted by your IMPRESSA to rinse the
Easy-Auto-Cappuccino Frother.
Ⅲ Draw steam until the container with the Auto-Cappuccino Clea-
ner is empty.
This procedure cleans the Easy-Auto-Cappuccino Frother and the
milk pipe.
13.2 Rinsing the Easy-Auto-Cappuccino Frother
Ⅲ Carefully pull off the Easy-Auto-Cappuccino Frother.
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ Dismantle the Easy-Auto-Cappuccino Frother (15) into its indi-
vidual parts (Fig. 16)
Ⅲ
STEAM
READY
Ⅲ Thoroughly rinse all parts of the nozzle under running water.
14
As long as STEAM READY os on view in the display, the
machine is ready to dispense steam.
You can programme the following stages:
¼ Filter
¼ Water hardness
¼ Aroma
Ⅲ Fill the container with 2.5 dl of fresh water.
Dip the milk pipe into the container with the fresh water.
¼ Temperature
¼ Time
E
When READY appears in the display, press the steam prese-
¼ Automatic switch-on time
¼ Automatic switch-off time
¼ Draw-offs
lect key
(8) again to set the machine in readiness for the
steam function.
¼ Language
¼ Display
Ⅲ Open the tap for dispensing steam/hot water (14) (Fig. 13) in or-
der to draw steam.
Programming key
Use the programming key
programming mode (no saving of values effected).
(4)
Ⅲ Draw steam until the container with the fresh water is empty.
This procedure rinses the Easy-Auto-Cappuccino Frother (15)
and the milk pipe with fresh water.
(4) to open or quit the
Ⅲ Cleaning of the Easy-Auto-Cappuccino Frother (15) is now com-
plete, your IMPRESSA is ready for use.
Rotary switch
Turn the Rotary Switch to change the adjusted values or to
select the next programming step.
Press the Rotary Switch to check the values adjusted or to
save the values selected
14. Switching off the IMPRESSA
To ensure perfect operation, please switch your IMPRESSA
to standby mode with the
the machine off with the power switch (21).
(3) symbol first. Then switch
15.1 Programming the filter
Refer to Chapter 5.1 «Inserting the filter».
Ⅲ
READY
Ⅲ Switch off the IMPRESSA using the ON/OFF key
RINSING
(3).
15.2 Programming the water hardness
Ⅲ
Refer to Chapter 4 «Adjusting the water hardness».
Ⅲ An automatic rinsing operation is started.
15.3 Programming the aroma ROBUST
or STANDARD
15. Programming
When your IMPRESSA leaves the factory it is adjusted such
that you can draw off coffee without having to change any
settings. However, you can programme various parameters
individually.
When the machine leaves the factory, the aroma is set to
robust. If requested it can also be set to Standard.
15
Ⅲ
READY
Ⅲ Press programming key
FILTER appears.
Ⅲ
NORMAL
Ⅲ To confirm the new settings, press the Rotary Switch (1).
TEMPERATURE
Ⅲ Press the programming key
(4) until
Ⅲ
Ⅲ The illuminated ring (2) is active.
(4) to quit the programming
Ⅲ Turn the Rotary Switch (1) until Aroma is displayed.
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ
AROMA
Ⅲ Press the Rotary Switch (1).
ROBUST
Ⅲ
READY
Ⅲ
15.5 Programming the time
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
played:
You must programme the time if you want to use the auto-
matic switch-on function.
Ⅲ
STANDARD
Ⅲ To confirm the new aroma settings, press the Rotary Switch (1).
AROMA
Ⅲ Press the programming key
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ
READY
Ⅲ Press programming key
FILTER appears.
Ⅲ
(4) until
(4) to quit the programming
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until TIME is displayed.
Ⅲ
READY
Ⅲ
TIME
Ⅲ Now press the Rotary Switch (1) to start programming the time.
--:--
Ⅲ Turn the Rotary Switch (1) to adjust the hours..
12:--
15.4 Programming the temperature
Ⅲ
Ⅲ
READY
Ⅲ Press programming key
FILTER appears.
(4) until
Ⅲ
Ⅲ Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until Temperature is displayed.
Ⅲ
12:--
Ⅲ Turn the Rotary Switch (1) to select the minutes.
2:05
Ⅲ To confirm the new settings, press the Rotary Switch (1).
TIME
Ⅲ
TEMPERATURE
Ⅲ Press the Rotary Switch (1).
HIGH
Ⅲ
Ⅲ
Ⅲ Turn the Rotary Switch (1) to change the temperature from
HIGH to NORMAL (or vice versa).
Ⅲ
16
Ⅲ Press the programming key
(4) to quit the programming
Ⅲ Press the programming key
(4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ
READY
Ⅲ
READY
If the machine is disconnected from power supply, the time
must be programmed again.
E
15.7 Programming the automatic switch-off time
You can programme your coffee machine such that it will
switch off automatically after a certain time. You can pro-
gramme the switch-off time in a range between 0.5 and 9
hours, or select ––:–– (i.e. inactive).
15.6 Programming the automatic switch-on time
You must programme the time (Chapter 15.5) if you want to
use the automatic switch-on function.
Ⅲ
READY
Ⅲ Press programming key
FILTER appears.
Ⅲ
READY
Ⅲ Press programming key
FILTER appears.
(4) until
(4) until
Ⅲ The illuminated ring (2) is active.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until OFF AFT. HR is displayed.
Ⅲ Turn the Rotary Switch (1) until MACHINE ON is displayed.
Ⅲ
OFF AFT. HR
Ⅲ
MACHINE ON
Ⅲ Now press the Rotary Switch (1) to start programming the
Ⅲ Now press the Rotary Switch (1) to start programming the
switch-off time. Switch-off time OFF AFT. HR
switch-on time.
Ⅲ
5.0 HR
Ⅲ Turn the Rotary Switch (1) to adjust the hours.
1.0 HR
Ⅲ To confirm the new switch-off time, press the Rotary Switch (1).
OFF AFT. HR
Ⅲ Press the programming key
Ⅲ
--:--
Ⅲ Turn the Rotary Switch (1) to adjust the hours.
12:--
Ⅲ
Ⅲ
Ⅲ Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
Ⅲ
(4) to quit the programming
Ⅲ
12:--
Ⅲ Turn the Rotary Switch (1) to select the minutes.
12:05
Ⅲ To confirm the new switch-on time, press the Rotary Switch (1).
MACHINE ON
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ
Ⅲ
READY
Ⅲ
17
15.8 Cup counter
15.9 Programming the language
You can check how many cups of the following coffee products
were drawn off:
a) 1 cup
b) 2 cups
c) Powder coffee
Ⅲ
READY
Ⅲ Press programming key
FILTER appears.
(4) until
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until LANGUAGE is displayed.
Ⅲ
READY
Ⅲ Press programming key
FILTER appears.
Ⅲ
LANGUAGE
(4) until
Ⅲ Now press the Rotary Switch (1) to start programming the item
LANGUAGE.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until the required language is dis-
played.
Ⅲ Turn the Rotary Switch (1) until CUPS MADE is displayed.
Ⅲ For example
Ⅲ Press the Rotary Switch (1) to save the selected language
LANGUAGE
Ⅲ Press the programming key
ENGLISH
Ⅲ
CUPS MADE
Ⅲ Now press the Rotary Switch (1) to start programming the item
CUPS MADE
Ⅲ
Ⅲ The total number of drawn off products is displayed.
(4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ For example
100
Ⅲ Press one of the draw-off keys to learn the number of draw-off
operations for the individual products (1 cup
powder)
Ⅲ
READY
, 2 cups
20
,
Ⅲ For example, press draw-off key for 1 cup
15.10 Programming Display 24H/AM/PM
Ⅲ
READY
Ⅲ Press programming key
FILTER –/
ߛ appears The number of pre-ground coffee drawn off can be checked
by opening the filler funnel for pre-ground coffee.
(4) until
Ⅲ To quit, press the Rotary Switch (1).
Ⅲ The illuminated ring (2) is active.
Ⅲ
CUPS MADE
Ⅲ Turn the Rotary Switch (1) until
DISPLAY appears
Ⅲ Press the programming key
(4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ Press the Rotary Switch (1)
Ⅲ
ML/OZ appears
Ⅲ
READY
Ⅲ Turn the Rotary Switch (1) until
24H/AM PM appears
18
Ⅲ Press the Rotary Switch (1)
e.g. 24H
16. Maintenance
Ⅲ
16.1 Filling in water
Ⅲ Select a setting of your choice.
Ⅲ
FILL
Ⅲ Press the Rotary Switch (1) to save the setting.
WATER
Ⅲ
DISPLAY
E
If this information is displayed, drawing off products is no
longer possible. Refill water as described in Chapter 2.3.
Ⅲ Press the programming key
mode or select the next programming item using the Rotary
Switch (1).
(4) to quit the programming
Ⅲ
READY
Ⅲ
READY
The water tank should be rinsed daily and refilled with fresh
water. Only fill in fresh, cold water. Never fill in milk,
mineral water or other liquids.
15.11 Programming the display for ML/OZ
Ⅲ
READY
Ⅲ Press programming key
FILTER –/
ߛ appears (4) until
16.2 Emptying the coffee grounds container
Ⅲ
EMPTY
Ⅲ The illuminated ring (2) is active.
GROUNDS
Ⅲ Turn the Rotary Switch (1) until
DISPLAY appears
If this message appears on the display, you can no longer
draw off coffee. You must empty the coffee grounds con-
tainer first (Fig. 14).
Ⅲ Press the Rotary Switch (1)
Ⅲ
ML/OZ appears
Ⅲ Press the Rotary Switch (1)
e.g. ML
Ⅲ Carefully take out the drip tray, it is filled with water.
Ⅲ
Ⅲ
NO –
TRAY
Ⅲ Select a setting of your choice.
Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ Insert the empty and clean trip tray again.
Ⅲ
DISPLAY
Ⅲ
READY
Ⅲ Press the programming key
(4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
The red water level indicator appears when the drip tray is
full.
Ⅲ
READY
19
16.3 Drip tray missing
Ⅲ
READY
CLEAN
Ⅲ
NO –
TRAY
16.7 IMPRESSA decalcify
Ⅲ If this information is displayed, the drip tray (20) is not installed
properly or was not installed at all.
During operation, the machine will calcify. The degree of scaling
depends on the hardness of the water in your region. The machine
will inform you when de-scaling is required. You can still draw off
coffee or hot water/steam. However, we recommend that you
should de-scale the machine (Chapter 18) within the next few days.
Ⅲ Insert the drip tray (20).
Ⅲ
READY
16.4 Fill coffee beans
Ⅲ
READY
DECALCIFY
Ⅲ
FILL
BEANS
Ⅲ Refill beans as described in Chapter 2.4.
16.8 General cleaning instructions
The message REFILL BEANS will disappear after you draw
off your next cup of coffee.
Ⅲ Never use scratching objects, pan cleaners, cleaning sponges or
caustic chemicals to clean the machine.
Ⅲ Wipe off the case on the inside and outside using a soft, moist
cloth.
We recommend that you clean the bean tank regularly before
refilling beans, using a dry cloth. Before cleaning the tank,
switch off the IMPRESSA.
Ⅲ Clean the replaceable hot water nozzle after each use.
Ⅲ To ensure that the Easy-Auto-Cappuccino Frother functions per-
fectly, you should rinse it with water each time after preparing
milk.
16.5 Replacing the filter
After drawing off 50 litres, the filter cartridge will be used
up. A message requesting you to replace the filter will appear
on the display.
Ⅲ To ensure that the Easy-Auto-Cappuccino Frother functions per-
fectly, you should clean it daily if you have prepared milk.
Ⅲ The water tank should be rinsed daily and refilled with fresh
water.
Refer to Chapter 5.2 «Replacing the filter».
If the water tank shows signs of scaling, remove the scaling
using a commercial de-scaling solvent. Take out the water
tank (Fig. 4).
16.6 Cleaning the IMPRESSA
After 200 draw-off operations or after 160 rinsing operations, the
IMPRESSA must be cleaned. A message appears on the display,
telling you to start the cleaning programme. You can still draw off
coffee or hot water/steam. However, we recommend that you
should clean the machine (Chapter 17) within the next few days.
Remove the Claris filter cartridge, if installed, before de-
scaling the water tank.
20
16.9 Emptying the system
Ⅲ Press the maintenance key
displayed:
(7) until the following message is
Precondition: IMPRESSA switched off
Ⅲ
EMPTY
TRAY
This operation is required to protect the IMPRESSA against
frost damage during transports.
Ⅲ Empty the tray
E
Ⅲ
NO
TRAY
Ⅲ Place a container under the Easy-Auto-Cappuccino Frother (15)
(Fig. 10).
Ⅲ Insert the tray again.
Ⅲ Press the steam preselection key
(8) until the following
Ⅲ Remove the drip grate (19).
message is displayed:
Ⅲ Put a container (Fig. 12) under the adjustable coffee spout (17).
Ⅲ
Ⅲ
Ⅲ
OPEN TAP
EMPTYING
CLOSE TAP
Ⅲ
PRESS
RINSE
Ⅲ Press the maintenance key
(7).
Ⅲ The IMPRESSA is switched off.
Ⅲ
Ⅲ
CLEANING
FILL
17. Cleaning
TABLET
Your IMPRESSA features an integrated cleaning program. The
cleaning operation will take some 15 min.
Ⅲ Fill in the tablet (see Fig. 15)
Ⅲ
PRESS
RINSE
Original JURA cleaning tablets which are specially designed
for the cleaning programm of your IMPRESSA are available
at your authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate cleaning solvents.
Ⅲ Press the maintenance key
(7).
Ⅲ
Ⅲ
CLEANING
EMPTY
TRAY
Ⅲ
Ⅲ
NO
TRAY
Once started, the de-scaling operation must not be inter-
rupted!
READY
After each cleaning operation the filler funnel for pre-ground
coffee should be cleaned (11).
Ⅲ Wipe coffee powder tank with a dry cloth after the cleaning
program has finished.
Ⅲ The cleaning operation was completed successfully.
Ⅲ
READY
CLEAN
21
18. De-scaling
Ⅲ
NO –
TRAY
Your IMPRESSA features an integrated de-scaling program. The
de-scaling operation will take some 40 min.
Ⅲ Insert the tray again.
Ⅲ
SOLVENT
IN TANK
Original JURA de-scaling tablets wich are specially designed
for the de-scaling program of your IMPRESSA are available
at your authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate de-scaling solvents.
Completely dissolve the content of one blister (3 tablets) in a jug
containing 0.5 litres of water, and fill the mixture in the water tank.
Reinstall the water tank.
If the IMPRESSA needs de-scaling, the corresponding mes-
sage is displayed.
You can still draw off coffee or hot water/steam and start the
de-scaling program later.
Before starting the de-scaling program, the machine must be
switched off. Once started, the de-scaling operation must not
be interrupted.
Ⅲ
OPEN TAP
SOLVENT
IN TANK
Ⅲ Put a sufficiently large container under the hot water spout
(Fig. 17).
Ⅲ Open the steam / hot water draw-off valve (14) (Fig. 13).
Ⅲ
Ⅲ
DE-SCALING
CLOSE TAP
When using the de-scaling solvent, immediately remove any
splashes or drips from sensitive surfaces, i.e. natural stone
and wooden surfaces, or take appropriate precautions.
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ
Ⅲ
DE-SCALING
In any case wait until the de-scaling solvent is used up and
the tank is empty. Never refill de-scaling solvent.
EMPTY
TRAY
Ⅲ Empty the tray
NO –
TRAY
Ⅲ Insert the tray again.
Ⅲ
READY
DECALCIFY
Ⅲ
Ⅲ Switch off the IMPRESSA using the ON/OFF key
(3).
Ⅲ Remove the Easy-Auto-Cappuccino Frother (15) (Fig. 17).
Ⅲ
FILL
Ⅲ Press the maintenance key
(7) until the following message is
WATER
displayed:
Ⅲ
EMPTY
TRAY
Rinse the water tank thoroughly and fill it with cold, fresh
tap water. Install it again.
Ⅲ Empty the tray
22
20. Tips for perfect coffee
Ⅲ
OPEN
TAP
Height-adjustable coffee spout (17)
You can adjust the height of the coffee spout to the size of your
cups (Fig. 3)
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 13).
Ⅲ
Ⅲ
DE-SCALING
CLOSE TAP
Grinding degree
Refer to Chapter 2.5 «Adjusting the grinding gear».
E
Ⅲ After you have closed the steam / hot water draw off tap (14),
the following message is displayed
Ⅲ
Ⅲ
DE-SCALING
Preheating cups
You can preheat the cups using hot water or steam. The smaller the
coffee you want to draw off, the more important preheating is.
EMPTY
TRAY
Ⅲ Empty the tray
NO –
TRAY
Ⅲ Insert the tray again.
Sugar and cream
Ⅲ
Stirring coffee/tea will result in heat being released. Adding
refrigerated cream or milk will reduce the temperature of the coffee
significantly.
Ⅲ
PRESS
RINSE
Ⅲ Press the maintenance key
(7).
Ⅲ
Ⅲ
RINSING
READY
Ⅲ The de-scaling operation was completed successfully.
19. Disposal
Please dispose of old machines in an environmentally
compatible way
Old machines contain valuable materials capable of being
recycled which should be salvaged for recycling. Please
therefore dispose of old machines via suitable collection
systems.
23
21. Messages
Cause
Remedy
FILL WATER
Water tank is empty.
Float defective
Refill water
Rinse or de-scale water tank
Refill beans
FILL BEANS
Bean tank is empty.
Although you have refilled beans, the
message still appears.
Draw off a cup of coffee. The message will
disappear only after you have drawn off a cup
of coffee
EMPTY GROUNDS
Coffee grounds container full
Tray reinstalled too early after emptying
Drip tray not installed properly or missing
Cleaning required
Empty coffee grounds container
Wait 10 sec. before reinstalling the tray
Install tray properly
NO TRAY
READY CLEAN
READY SCALED
READY FILTER
FAULT
Start cleaning programme (Chapter 17)
Start de-scaling programme (Chapter 18)
Replace filter (Chapter 5.2)
De-scaling required
Filter used up
General fault
- switch off
- disconnect from mains supply
- Connect IMPRESSA to power supply
- Switch on IMPRESSA
- Have IMPRESSA checked by
- JURA Service
24
22. Problems
Problem
Cause
Remedy
Very loud noise coming from the
grinding gear
Foreign body in grinding gear
Drawing off pre-ground coffee still possible
Have IMPRESSA checked by JURA Service
E
Too little froth when
frothing milk
Easy Cappuccino Frother has become
dirty
Clean the Easy-Auto-Cappuccino Frother
(Chapter 13)
Individual parts of the Easy-Auto-
Cappuccino Frother are incorrectly
assembled
Check correct assembly of the
Easy-Auto-Cappuccino Frother
Coffee only drips
from the coffee spout
Grinding degree too fine
Pre-ground coffee too fine
Coarser grinding gear adjustment
Use a coarser pre-ground coffee
High-frequency, electromagnetic interference may influence the display. Drawing off coffee is possible at any time.
If the messages or problems still persist, please contact your local authorized dealer or JURA Elektroapparate AG.
25
23. Legal information
24. Technical data
Voltage:
These operating instructions contain all the information required
for using, operating and maintaining the machine properly.
230V AC
1450 W
10 A
Power:
Knowledge of and compliance with the specifications contained in
these operating instructions is required for using the machine safely
as well as for operational safety and safety during maintenance.
These operating instructions cannot cover any conceivable appli-
cation. The machine was designed for private household use.
Additionally we point out that the content of these operating
instructions does not form part of any previous or existing agree-
ment, consent or al legal relationship nor does it constitute a
change of such an agreement, consent or legal relationship. Any
obligations to be fulfilled by JURA Elektroapparate AG are stipu-
lated in the corresponding purchase contract, which also contains
the full and solely applicable warranty stipulations. These con-
tractual warranty stipulations are neither extended nor limited by
the specifications contained in these operating instructions.
Intensity of current:
Safety check:
Energy consumption Standby:
approx. 3.5 Wh
Energy consumption
«Ready for draw-off» mode:
approx. 11.5 Wh
static, max. 15 bar
1.9 litres
Pump pressure:
Water tank:
Bean tank capacity:
Coffee grounds container capacity :
Length of cable:
Weight:
200gr
max. 16 portions
approx. 1.1 m
9.1 kg
The operating instructions contain information, protected by Copy-
right. Photocopying or translations into other languages shall not be
permissible without JURA Elektroapparate AG’s written approval.
Size (WxHxD):
28 x 34.5 x 44.5 cm
The machine complies with the following EU directives:
73/23/EWG dated 19/02/1973 "Low Voltage Directive" including
Modification Directive 93/336/EWG
89/336/EWG dated 03/05/1989 "EMC Directive" including
Modification Directive 92/31/EWG
26
|