JVC KD S735R User Manual

CD RECEIVER

CD-RECEIVER

RECEPTEUR CD

CD-RECEIVER

KD-S735R

45Wx4

DISP

RND

RDS

PTY

SCM

COMPACT

DIGITAL AUDIO

For installation and connections, refer to the separate manual.

Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.

Pour l’installation et les raccordements, se référer au manuel séparé.

Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende

handleiding.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

GET0105-001A

[E/EX]

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit ...............................

SOUND ADJUSTMENTS ................... 18

Adjusting the sound .................................. 18

Using the sound control memory (SCM)... 19

Storing your own sound adjustments ........ 20

LOCATION OF THE BUTTONS ............ 4

Control panel.............................................

BASIC OPERATIONS ....................... 5

OTHER MAIN FUNCTIONS ................ 21

Setting the clock........................................ 21

Changing the general settings (PSM) ....... 21

Detaching the control panel ...................... 24

Turning on the power ................................

RADIO OPERATIONS ...................... 6

Listening to the radio.................................

Storing stations in memory .......................

Tuning in to a preset station ......................

MAINTENANCE ............................. 25

Handling CDs ............................................ 25

RDS OPERATIONS ......................... 10

What you can do with RDS ....................... 10

Other convenient RDS functions and

TROUBLESHOOTING ...................... 26

SPECIFICATIONS ........................... 27

adjustments ............................................ 13

CD OPERATIONS ........................... 16

Playing a CD ............................................. 16

Locating a track or a particular portion

on a CD .................................................. 17

Playing at Random .................................... 17

Prohibiting CD ejection ............................. 17

Note:

For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on

the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.

BEFORE USE

*For safety....

*Temperature inside the car....

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

If you have parked the car for a long time in hot or

cold weather, wait until the temperature in the car

becomes normal before operating the unit.

LOCATION OF THE BUTTONS

Control panel

Display window

o ;

f g

2 3

7 8

45Wx4

DISP

RND

RDS

PTY

SCM

(standby/on/attenuator) button

Display window

i Volume (or audio) level indicator

Equalization pattern indicator

o FM band indicator (FM1, FM2, FM3)

; CD source indicator

a Tuner reception indicators

MO (monaural), ST (stereo)

s RND (random) indicator

d RDS indicators

EON, AF, REG, TP, PTY

f SCM (sound control memory) indicator

g LOUD (loudness) indicator

h AM band indicator

2 Control dial

3 DISP (display) button

4 Display window

5 Loading slot

6 AM button

7 CD button

8 FM button

9 0 (eject) button

p ¢

buttons

• Also functions as SSM buttons when pressed

together.

q SEL (select) button

w MO (monaural) button

j Main display

k CD–in indicator

l Sound mode indicators

BEAT, SOFT, POP

RND (random) button

e Number buttons

r TP (traffic programme) button

RDS (radio data system) button

t PTY (programme type) button

y SCM (sound control memory) button

(control panel release) button

BASIC OPERATIONS

DISP

RND

RDS

PTY

SCM

4 Adjust the sound as you want.

Turning on the power

(See pages 18 – 20.)

1 Turn on the power.

To drop the volume in a moment

Press

briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

• If you turn the control dial clockwise, you can

also restore the sound.

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

2 Select the source.

To turn off the power

Press and hold

second.

for more than one

• If you turn off the power while listening to a

CD, CD play will start from where playback has

been stopped previously, next time you turn on

the power.

To operate the tuner (FM or AM),

see pages 6 – 15.

To play a CD,

Note:

see pages 16 – 17.

When you use this unit for the first time, set the built-

in clock correctly, see page 21.

3 Adjust the volume.

To increase the volume.

CAUTION on Volume Setting:

CDs produce very little noise compared with other

sources. If the volume level is adjusted for the

tuner, for example, the speakers may be damaged

by the sudden increase in the output level.

Therefore, lower the volume before playing a disc

and adjust it as required during playback.

To decrease the volume.

Volume level indicator

Volume level appears.

RADIO OPERATIONS

DISP

RND

RDS

PTY

SCM

Listening to the radio

2 Start searching a station.

To search stations of higher

frequencies.

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching a station automatically:

Auto search

To search stations of lower

frequencies.

1 Select the band (FM1 – 3, AM).

When a station is received, searching

stops.

To stop searching before a station is received,

press the same button you have pressed for

searching.

FM1

FM2

FM3

Selected band appears.

Audio (see page 23) or volume level

indicator.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

Searching a station manually:

Manual search

3 Tune in to a station you want while“M”

is flashing.

To tune in to stations of

higher frequencies.

1 Select the band (FM1 – 3, AM).

To tune in to stations of

lower frequencies.

FM1

FM2

FM3

• If you release your finger from the button,

the manual mode will automatically turn

off after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for

FM and 9 kHz intervals for AM—MW/LW)

until you release the button.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

When an FM stereo broadcast is hard to

receive:

2 Press and hold ¢

or 4

until “M (manual)” starts flashing on

the display.

Press MO RND (monaural/random) while

listening to an FM stereo broadcast.

• Each time you press the button, the MO

indicator lights up and goes off alternately.

Lights up when receiving an

FM broadcast in stereo.

RND

Selected band appears.

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

Manual preset

You can preset up to 6 stations in each band

(FM1, FM2, FM3 and AM) manually.

Storing stations in memory

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

Ex.: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band.

• Manual preset of both FM and AM stations

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2 and FM3).

1 Select the FM band (FM1 – 3) you

FM1

FM2

FM3

want to store FM stations into.

FM1

FM2

FM3

2 Tune in to a station (in this example

of 88.3 MHz).

To tune in to stations of

higher frequencies.

2 Press and hold both buttons for more

than 2 seconds.

To tune in to stations of

lower frequencies.

“SSM” appears, then disappears when

automatic preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2 or FM3).

These stations are preset in the number buttons

—No.1 (lowest frequency) to No.6 (highest

frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

Tuning in to a preset station

3 Press and hold the number button

(in this example, 1) for more than 2

You can easily tune in to a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on page 8.

seconds.

1 Select the band (FM1 – 3, AM).

FM1

FM2

FM3

“P1” flashes for a few seconds.

4 Repeat the above procedure to store

other stations into other preset

numbers.

2 Select the number (1 – 6) for the preset

Notes:

station you want.

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

RDS OPERATIONS

What you can do with RDS

To use Network-Tracking Reception, press

and hold TP RDS (Traffic Programme/Radio Data

System) for more than 1 second. Each time you

press and hold the button, Network-Tracking

Reception modes change as follows:

RDS (Radio Data System) allows FM stations to

send an additional signal along with their regular

programme signals. For example, the stations

send their station names, as well as information

about what type of programme they broadcast,

such as sports or music, etc.

Mode 1

Mode 2

Mode 3

Another advantage of RDS function is called

“Enhanced Other Networks.” The EON indicator

lights up while receiving an FM station with the

Enhanced Other Networks data. By using the

Enhanced Other Networks data sent from a

station, you can tune in to a different station of a

different network broadcasting your favourite

programme or traffic announcement while

listening to another programme or to another

source such as CD.

AF indicator

REG indicator

Mode 1

The AF indicator lights up but the REG indicator

does not.

Network-Tracking Reception is activated with

Regionalization set to “off.”

Switches to another station within the same

network when the receiving signals from the

current station become weak.

By receiving the RDS data, this unit can do the

following:

• Tracing the same programme automatically

(Network-Tracking Reception)

• Standby Reception ofTA (Traffic Announcement)

or your favourite programme

• PTY (Programme Type) search

• Programme search

• In this mode, the programme may differ from the

one currently received.

• And some other functions

Mode 2

Both the AF indicator and the REG indicator light

up.

Network-Tracking Reception is activated with

Regionalization set to “on.”

Tracing the same programme

automatically (Network-Tracking

Reception)

Switches to another station, within the same

network, broadcasting the same programme

when the receiving signals from the current

station become weak.

When driving in an area where FM reception is

not good, the tuner built in this unit automatically

tunes in to another RDS station, broadcasting

the same programme with stronger signals. So,

you can continue to listen to the same

programme in its finest reception, no matter

where you drive.

(See the illustration on the next page.)

Two types of the RDS data are used to make

Network-Tracking Reception work correctly—PI

(Programme Identification) and AF (Alternative

Frequency).

Mode 3

Neither the AF indicator nor the REG indicator

lights up.

Network-Tracking Reception is deactivated.

Without receiving these data correctly from the

RDS station you are listening to, Network-

Tracking Reception will not operate.

The same programme can be received on

different frequencies.

PTY Standby Reception

When you press PTY while listening to

PTY

Programme 1

an FM station, the PTY indicator is lit

during reception of a PTY station and

the PTY standby mode is engaged.

The selected PTY name stored on

page 12 flashes for 5 seconds.

broadcasting

Programme 1

on frequency A

broadcasting

on frequency E

• When the station being received is not a PTY

station, the PTY indicator flashes. Press ¢

to engage the PTY standby mode.

“SEARCH” appears on the display, and PTY

station search starts. When a PTY station is tuned

in, the PTY indicator is lit.

Programme 1

broadcasting

on frequency B

broadcasting

Programme 1

broadcasting

on frequency D

7 If you are listening to a CD and wish to listen to

a selected PTY broadcast, press PTY to enter

the PTY standby mode. (The PTY indicator

lights up.)

on frequency C

Using Standby Reception

Standby Reception allows the unit to switch

temporarily to your favourite programme (PTY:

Programme Type) and Traffic Announcement

(TA) from the current source (another FM station

or CD).

If the selected PTY programme starts

broadcasting while the PTY standby mode is

active, the selected PTY name appears and the

playback source changes to the FM band. The

selected PTY programme can then be heard.

• Standby Reception will not work if you are listening

to an AM station.

To deactivate the PTY standby mode, press

PTY again.

TA Standby Reception

When you press TP RDS while

listening to an FM station, the TP

indicator is lit during reception of a TP

(Traffic Programme) station and the TA

standby mode is engaged.

• When the station being received is not a TP station,

the TP indicator flashes. Press ¢

or 4

to engage the TA standby mode. “SEARCH” appears

on the display, and TP station search starts. When a

TP station is tuned in, the TP indicator is lit.

7 If you are listening to a CD and wish to listen to

a TP station, press TP RDS to enter the TA

standby mode. (The TP indicator lights up.)

If a traffic programme starts broadcasting while

the TA standby mode is active, “TRAFFIC”

appears and the playback source changes to the

FM band. The volume increases to the preset TA

volume level (see page 14) and the traffic

programme can be heard.

To deactivate the TA standby mode, press

TP RDS again.

Selecting your favourite programme

for PTY Standby Reception

You can select your favourite programme for PTY

Standby Reception to store in memory.

When shipped from the factory, “NEWS” is stored

as the programme type for PTY Standby

Reception.

Searching your favourite programme

You can search one of your 6 favourite

programme types stored in memory.

When shipped from the factory, the following 6

programme types have been stored in the

number buttons (1 to 6).

To store your favourite programme types, see

below.

To search your favourite programme type, see

page 13.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 22.)

POP M

ROCK M

EASY M

CLASSICS

AFFAIRS

VARIED

To store your favourite programme types

1 Press and hold SEL (select) for more

than 2 seconds so that one of the PSM

items appears on the display.

(PSM: see page 22.)

2 Select “PTY STBY (standby)” if not

shown on the display.

3 Select one of twenty-nine PTY codes.

(See page 15.)

2 Select “PTY SRCH (search)” if not

shown on the display.

Selected code name

appears on the display

and is stored into memory.

3 Select one of twenty-nine PTY codes.

(See page 15.)

4 Finish the setting.

Selected code name

appears on the display.

• If the code already

stored in memory is

selected, it will flash on

the display.

• If there is a station broadcasting a programme

of the same PTY code as you selected, that

station is tuned in.

• If there is no station broadcasting a

programme of the same PTY code as you

selected, the station will not change.

4 Press and hold the number button for

more than 2 seconds to store the PTY

code selected into the preset number

you want.

Note:

In some areas, the PTY search will not work correctly.

The selected code name will flash on the

display.

Other convenient RDS

functions and adjustments

5 Finish the setting.

Automatic selection of the station

when using the number buttons

Usually when you press the number button, the

preset station is tuned in.

However, when the preset station is an RDS

station, something different will happen. If the

signals from that preset station are not sufficient

for good reception, this unit, using the AF data,

tunes in to another frequency broadcasting the

same programme as the original preset station is

broadcasting. (Programme search)

To search your favourite programme type

1 Press and hold PTY (programme type)

for more than 1 second while listening

to an FM station.

• The unit takes some time to tune in to another

station using Programme search.

PTY

To activate programme search, follow the

procedure below.

• See also “Changing the general settings (PSM)”

on page 21.

The last selected PTY code appears.

2 Select one of the PTY codes stored in

the preset number buttons (1 to 6).

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢

or 4

to select

“P(Programme)-SEARCH.”

3 Turn the control dial clockwise to select “ON.”

Now programme search is activated.

4 Press SEL (select) to finish the setting.

Ex.: When “ROCK M” is stored in

To cancel programme search, repeat the same

procedure and select “OFF” in step 3 by turning

the control dial counterclockwise.

preset number button 2

PTY search for your favourite programme

starts after 5 seconds.

Changing the display mode while

listening to an FM station

You can change the initial indication on the

display to station name (PS NAME), station

frequency (FREQ) or clock time (CLOCK) while

listening to an FM RDS station.

Setting the TA volume level

You can preset the volume level for TA Standby

Reception. When a traffic programme is

received, the volume level automatically changes

to the preset level.

• See also “Changing the general settings (PSM)”

on page 21.

• See also “Changing the general settings (PSM)”

on page 21.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢

(volume).”

or 4

to select “TA VOL

2 Press ¢

or 4

(display mode).”

to select “DISPMODE

3 Turn the control dial to set to the desired volume.

You can set it from “VOL 00” to “VOL 50.”

4 Press SEL (select) to finish the setting.

3 Turn the control dial to set to the desired

indication (“PS NAME”, “FREQ” or “CLOCK”).

4 Press SEL (select) to finish the setting.

Automatic clock adjustment

Note:

By pressing DISP (display), you can change the

display while listening to an FM RDS station only.

Each time you press the button, the following

information appears on the display:

When shipped from the factory, the clock built in

this unit is set to be readjusted automatically

using the CT (Clock Time) data in the RDS

signal.

If you do not want to use automatic clock

adjustment, follow the procedure below.

• See also “Changing the general settings (PSM)”

on page 21.

Station name

(PS NAME)

Station frequency

(FREQ)

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢

(adjustment).”

or 4

to select “AUTO ADJ

Programme type

(PTY)

3 Turn the control dial counterclockwise to select

“OFF.”

Now automatic clock adjustment is canceled.

4 Press SEL (select) to finish the setting.

Clock

• Then, the display goes back to the original indication

in several seconds.

To reactivate clock adjustment, repeat the

same procedure and select “ON” in step 3 by

turning the control dial clockwise.

Note:

You must stay tuned to the same station for more than

2 minutes after setting “AUTO ADJ” to “ON.”

Otherwise, the clock time will not be adjusted. (This is

because the unit takes up to 2 minutes to capture the

CT data in the RDS signal.)

PTY codes

NEWS:

News

SOCIAL:

Programmes on social activities

AFFAIRS:

Topical programmes expanding

on current news or affairs

Programmes which impart

advice on a wide variety of topics

Sport events

RELIGION: Programmes dealing with any

aspect of belief or faith, or the

nature of existence or ethics

PHONE IN: Programmes where people can

express their views either by

INFO:

SPORT:

EDUCATE: Educational programmes

DRAMA: Radio plays

CULTURE: Programmes on national or

regional culture

phone or in a public forum

TRAVEL:

Programmes about travel

destinations, package tours,

and travel ideas and

SCIENCE:

Programmes on natural science

and technology

Other programmes like comedies

or ceremonies

opportunities

LEISURE:

JAZZ:

Programmes concerned with

recreational activities such as

gardening, cooking, fishing, etc.

Jazz music

VARIED:

POP M:

Pop music

ROCK M:

EASY M:

LIGHT M:

Rock music

Easy-listening music

Light music

COUNTRY: Country music

NATION M: Current popular music from

another nation or region, in that

country’s language

CLASSICS: Classical music

OTHER M: Other music

WEATHER: Weather information

FINANCE: Reports on commerce, trading,

the Stock Market, etc.

OLDIES:

FOLK M:

Classic pop music

Folk music

DOCUMENT: Programmes dealing with

factual matters, presented in an

investigative style

CHILDREN: Entertainment programmes for

children

CD OPERATIONS

DISP

RND

RDS

PTY

SCM

All tracks will be played repeatedly until you stop

playback.

Playing a CD

1 Insert a CD into the loading slot.

Note:

The unit turns on,

draws the CD and

starts playback

automatically.

When a CD is inserted upside down, the CD

automatically ejects.

To stop play and eject the CD

Press 0.

Note on One-Touch Operation:

CD play stops and the CD automatically ejects

from the loading slot.

When a CD is already in the loading slot,

pressing the CD button turns on the unit and

starts playback automatically.

• If you change the source, the CD play also

stops (without ejecting the CD this time).

Next time you select “CD” as the source, CD

play starts from where playback has been

stopped previously.

The CD–in indicator flashes.

The CD–in indicator lights up.

Notes:

• If the ejected disc is not removed for about 15

seconds, the disc is automatically inserted again

into the loading slot to protect it from dust.

(CD play will not start this time.)

• You can eject the CD even when the unit is turned

off.

Total playing time Total track number

of the inserted disc of the inserted disc

Elapsed playing time Current track

Locating a track or a

particular portion on a CD

Playing at Random

You can play back all tracks on the CD at random.

To fast-forward or reverse the track

RND indicator

RND

Press and hold ¢

playing a CD, to fast-forward the

track.

, while

Each time you press MO RND (monaural/

random) while playing a CD, CD random play

mode turns on and off alternately.

Press and hold 4

playing a CD, to reverse the

track.

, while

When the random mode is turned on, the RND

indicator lights up on the display and a track

randomly selected starts playing.

To go to the next tracks or the previous

tracks

Press ¢

briefly, while

playing a CD, to go ahead to the

beginning of the next track.

Each time you press the button

consecutively, the beginning of

the next tracks is located and

played back.

Prohibiting CD ejection

You can prohibit CD ejection and can lock a CD

in the loading slot.

While pressing CD, press and hold 0 for

Press 4

briefly, while

more than 2 seconds.

playing a CD, to go back to the

beginning of the current track.

Each time you press the button

consecutively, the beginning of

the previous tracks is located

and played back.

To go to a particular track directly

“EJECT” flashes on the display for about 5

seconds, and the CD is locked and cannot be

ejected.

Press the number button corresponding to the

track number to start its playback.

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

To cancel the prohibition and unlock the CD,

press 0 again for more than 2 seconds, while

pressing CD.

“EJECT” appears on the display, and the CD

ejects from the loading slot.

SOUND ADJUSTMENTS

Adjusting the sound

2 Adjust the setting.

You can adjust the sound characteristics to your

preference.

To increase the level/

LOUD ON.

1 Select the item you want to adjust.

Each time you press the button,

the adjustable items change as

follows:

To decrease the level/

LOUD OFF.

Equalization pattern changes as you adjust

the bass or treble.

BAS

TRE

FAD

(bass)

(treble)

(fader)

VOL

BAL

LOUD

(volume)

(balance)

(loudness)

Indication

To do:

Range

BAS

TRE

FAD*

BAL

Adjust the bass.

–06 (min.)

+06 (max.)

Note:

Normally, the control dial works as the volume

control. So you do not have to select “VOL” to adjust

the volume level.

Adjust the treble.

–06 (min.)

+06 (max.)

Adjust the front

and rear speaker

balance.

R06 (Rear only)

F06 (Front only)

Adjust the left

and right speaker

balance.

L06 (Left only)

R06 (Right only)

LOUD

Boost low and high

frequencies to

produce a well-

balanced sound

at low volume

level.

LOUD ON

LOUD OFF

VOL

Adjust the volume. 00 (min.)

50 (max.)

* If you are using a two-speaker system, set the fader

level to “00.”

Indication

For:

Preset values

Using the sound control

memory (SCM)

BAS

TRE

LOUD

SCM OFF (Flat sound) 00

BEAT

SOFT

Rock or

disco music

+02

+01

You can select and store a preset sound

adjustment suitable for each playback source

(Advanced SCM).

Quiet

background

music

–03

+01

OFF

Selecting and storing the sound

modes

POP

Light music +04

Once you select a sound mode, it is stored in

memory. It will be recalled every time you select

the same source and will be shown on the

display.

A sound mode can be stored for each of the

following sources—FM1, FM2, FM3, AM, and CD.

• If you do not want to store the sound mode

separately for each playback source, but want

to use the same sound mode for all the

sources, see “To cancel Advanced SCM—SCM

LINK” on page 23.

Recalling the sound modes

When “SCM LINK” is set to “LINK ON,”

select the source.

Each time you change the

playback source, the SCM

indicator flashes on the

display.

Select the sound mode you want.

SCM

The sound mode stored in memory for the

selected source is recalled.

Notes:

Ex.: When you select “BEAT”

• You can adjust each sound mode to your preference,

Each time you press the button, the sound mode

changes as follows:

and store it in memory.

If you want to adjust and store your original sound

mode, see “Storing your own sound adjustments”

on page 20.

• To adjust the bass and treble reinforcement levels or

to turn on/off the loudness function temporarily, see

page 18. (Your adjustments will be canceled if

another source is selected.)

SCM OFF

(BEAT) (SOFT) (POP)

• When “SCM LINK” is set to “LINK ON” the

selected sound mode can be stored in memory

for the current source and the effect applies

only to the current source.

• When “SCM LINK” is set to “LINK OFF” the

selected sound mode effect applies to any

source.

Storing your own sound

adjustments

3 Adjust the bass or treble level, or turn

the loudness function on/off

(LOUD ON/LOUD OFF).

• See page 18 for details.

You can adjust the sound modes (BEAT, SOFT,

POP) to your preference and store your own

adjustments in memory.

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

1 Call up the sound mode you want to

adjust.

Equalization pattern changes as you adjust

the bass or treble.

• See “Using the sound control memory

(SCM)” on page 19 for details.

SCM

4 Repeat steps 2 and 3 to adjust the

other items.

5 Press and hold SCM until the sound

mode you have selected in step 1

flashes on the display.

Ex.: When you select “SOFT”

2 Select “BAS (bass)”, “TRE (treble)” or

“LOUD (loudness)”.

SCM

Your adjustment made for the selected

sound mode is stored in memory.

Ex.: When you adjust “TRE (treble)”

6 Repeat the same procedure to store

other sound modes.

To reset to the factory settings

Repeat the same procedure and reassign the

preset values listed in the table on page 19.

OTHER MAIN FUNCTIONS

5 Finish the setting.

Setting the clock

You can also set the clock system to either 24

hours or 12 hours.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the PSM

items appears on the display.

(See page 22.)

To check the current clock time while the unit

is turned off, press DISP (display).

The power turns on, the clock time is shown for 5

seconds, then the power turns off.

Changing the general settings

(PSM)

2 Set the hour.

1 Select “CLOCK H (hour)” if not shown on

the display.

You can change the items listed on the next page

by using the PSM (Preferred Setting Mode)

control.

2 Adjust the hour.

Basic Procedure

1 Press and hold SEL (select) for more

than 2 seconds so that one of the PSM

items appears on the display.

(See page 22.)

3 Set the minute.

1 Select “CLOCK M (minute).”

2 Adjust the minute.

2 Select the PSM item you want to

adjust. (See page 22.)

4 Set the clock system.

1 Select “24H/12H.”

2 Select “24H” or “12H.”

3 Adjust the PSM item selected.

CONTINUED ON THE NEXT PAGE

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5 Finish the setting.

Preferred Setting Mode (PSM) items

Factory-preset See

Set.

settings

page

Counter-

clockwise

Hold.

Select.

Clockwise

Advance

CLOCK H

CLOCK M

SCM LINK

Hour adjustment

Back

0:00

Minute adjustment

Advance

Sound control

memory linkage

LINK OFF

12H

LINK ON

24H

LINK ON

24H

19, 23

24H/12H

24/12-hour time

display

AUTO ADJ

DISPMODE

Automatic clock

setting

OFF

Display mode

PS NAME

FREQ

PS NAME

NEWS

CLOCK

PTY STBY

PTY SRCH

TA VOL

PTY standby

PTY search

29 programme types

(see page 15.)

(See page 12.) 12, 13

Traffic announcement

volume

VOL 00 – VOL 50

VOL 20

OFF

P-SEARCH

LEVEL

Programme search

Level display

OFF

AUDIO 2

AUDIO 1

AUDIO 2

OFF

TEL

Telephone muting

MUTING 1

MUTING 2

•

Press SEL (select) to finish the setting.

To cancel Advanced SCM—SCM LINK

To select the telephone muting—TEL

You can cancel the Advanced SCM (Sound

Control Memory), and unlink the sound modes

and the playback sources.

When shipped from the factory, a different sound

mode can be stored in memory for each source

so that you can change the sound modes simply

by changing the sources.

This mode is used when a cellular phone system

is connected. Depending on the phone system

used, select either “MUTING 1” or “MUTING 2,”

whichever mutes the sounds from this unit.

When shipped from the factory, this mode is

deactivated.

• MUTING 1: Select this if this setting can mute

the sounds.

• MUTING 2: Select this if this setting can mute

the sounds.

• LINK ON: Advanced SCM (different sound

modes for different sources).

• LINK OFF: Conventional SCM (one sound

mode for all sources).

• OFF:

Cancels the telephone muting.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢

or 4

to select “SCM LINK.”

2 Press ¢

or 4

to select “TEL.”

3 Turn the control dial to set to the desired

indication (“LINK ON” or “LINK OFF”).

3 Turn the control dial to set to the desired

indication (“MUTING 1”, “MUTING 2” or “OFF”).

4 Press SEL (select) to finish the setting.

To select the level meter—LEVEL

You can select the level display according to your

preference.

When shipped from the factory, “AUDIO 2” is

selected.

• AUDIO 1: Level meter illuminates from bottom

to top.

• AUDIO 2: Alternates level meter (moves

from bottom to top) and

illumination display.

• OFF:

Erases the audio level indicator.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢

or 4

to select “LEVEL.”

3 Turn the control dial to set to the desired

indication (“AUDIO 1”, “AUDIO 2” or “OFF”).

4 Press SEL (select) to finish the setting.

Attaching the control panel

1 Insert the left side of the control

panel into the groove on the panel

holder.

Detaching the control panel

You can detach the control panel when leaving

the car.

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

2 Press the right side of the control

1 Unlock the control panel.

panel to fix it to the panel holder.

2 Lift and pull the control panel out of

the unit.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3 Put the detached control panel into

the provided case.

Connectors

MAINTENANCE

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the CD and leave

the unit turned on for a few hours until the

moisture evaporates.

Handling CDs

This unit has been designed to reproduce CDs

and CD-Rs.

• Other discs cannot be played back.

This unit is not compatible with MP3.

How to handle CDs

When removing a CD from

its case, press down the

center holder of the case

and lift the CD out,

holding it by the edges.

• Always hold the CD by

the edges. Do not touch

its recording surface.

Center holder

When playing a CD-R (Recordable)

You can play back your original CD-Rs on this

unit.

• Before playing back CD-Rs, read their

instructions or cautions carefully.

• Some CD-Rs recorded on CD recorders may

not be played back on this unit because of their

disc characteristics, and of the following

reasons:

– Discs are dirty or scratched.

– Moisture condensation occurs on the lens

inside the unit.

When storing a CD into its case, gently insert the

CD around the center holder (with the printed

surface facing up).

• Make sure to store CDs into the cases after

use.

– The pickup lens inside the CD player is dirty.

• Use only “finalized” CD-Rs.

• CD-RWs (Rewritable) cannot be played back

on this unit.

• Do not use CD-Rs with stickers or sticking

labels on the surface. They may cause

malfunctions.

To keep CDs clean

A dirty CD may not play

correctly. If a CD does

become dirty, wipe it with

a soft cloth in a straight

line from center to edge.

To play new CDs

CAUTIONS:

New CDs may have some

rough spots around the

inner and outer edges. If

such a CD is used, this

unit may reject the CD.

To remove these rough

spots, rub the edges with

a pencil or ball-point pen,

etc.

• Do not insert 8 cm CDs (single CDs) into the

loading slot. (Such CDs cannot be ejected.)

• Do not insert any CD of unusual shape—like a

heart or flower; otherwise, it will cause a

malfunction.

• Do not expose CDs to direct sunlight or any

heat source or place them in a place subject to

high temperature and humidity. Do not leave

them in a car.

• Do not use any solvent (for example,

conventional record cleaner, spray, thinner,

benzine, etc.) to clean CDs.

About mistracking:

Mistracking may result from driving on extremely

rough roads. This does not damage the unit and

the CD, but will be annoying.

We recommend that you stop CD play while

driving on such rough roads.

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

• CD cannot be played back.

CD is inserted upside down.

Insert the CD correctly.

Stop playing CD while driving on

rough roads.

• CD sound is sometimes

interrupted.

You are driving on rough roads.

Change the disc.

The disc is scratched.

Check the cords and

connections.

Connections are incorrect.

Check the cords and

connections.

• Sound is sometimes

interrupted.

Connections are incorrect.

Adjust it to the optimum level.

• Sound cannot be heard from

the speakers.

The volume is turned to the

minimum level.

Check the cords and

connections.

Connections are incorrect.

Store stations manually.

• SSM (Strong-station

Sequential Memory)

automatic preset does not

work.

Signals are too weak.

Connect the antenna firmly.

Insert a CD correctly.

• Static noise while listening to

the radio.

The antenna is not connected

firmly.

• “NO DISC” appears on the

display.

No CD is inserted.

• CD cannot be ejected.

CD is locked.

Unlock the CD (see page 17).

• CD can neither be played

back nor ejected.

The unit may function

incorrectly.

Press and hold both

and 0 at the same time for

several seconds. Be careful not

to drop the CD when it is

ejected.

• This unit does not work at all.

The built-in microcomputer may

function incorrectly due to noise, (select) and

Press and hold both SEL

at the

etc.

same time for several seconds

to reset the unit. (The clock

setting and preset stations

stored in memory are erased.)

(See page 2.)

SPECIFICATIONS

CD PLAYER SECTION

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Type: Compact disc player

Front:

Rear:

45 W per channel

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Continuous Power Output (RMS):

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Front:

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

Rear:

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C

Dimensions (W × H × D):

Tone Control Range:

Bass:

Treble:

10 dB at 100 Hz

10 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Installation Size (approx.):

182 mm × 52 mm × 150 mm

Panel Size (approx.):

188 mm × 58 mm × 14 mm

Mass (approx.):

TUNER SECTION

Frequency Range:

1.3 kg (excluding accessories)

FM:

AM:

87.5 MHz to 108.0 MHz

(MW) 522 kHz to 1 620 kHz

(LW) 144 kHz to 279 kHz

[FM Tuner]

Design and specifications subject to change without

notice.

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Haben Sie PROBLEME mit dem Betrieb?

Bitte setzen Sie Ihr Gerät zurück

Siehe Seite Zurücksetzen des Geräts

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

Hebt u PROBLEMEN met de bediening?

Stel het apparaat terug

Zie de pagina met de paragraaf Het apparaat terugstellen

EN, GE, FR, NL

0902KKSMDTJEIN

KD-S735R

Installation/Connection Manual

Einbau/Anschlußanleitung

Manuel d’installation/raccordement

Handleiding voor installatie/aansluiting

0902KKSMDTJEIN

EN, GE, FR, NL

GET0105-004A

[E/EX]

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

• This unit is designed to operate on 12 V DC,

NEGATIVE ground electrical systems.

• Dieses Gerät ist für einen Betrieb in elektrischen

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt.

• Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE.

• Dit apparaat mag worden gebruikt bij elektrische

systemen die werken op 12 V gelijkstroom met negatieve

aarding.

INSTALLATION

EINBAU

INSTALLATION (MONTAGE

INSTALLATIE (INBOUW IN

(IN-DASH MOUNTING)

(IM ARMATURENBRETT)

DANS LE TABLEAU DE BORD) HET DASHBOARD)

• The following illustration shows a typical installation.

However, you should make adjustments

corresponding to your specific car. If you have any

questions or require information regarding

installation kits, consult your JVC IN-CAR

ENTERTAINMENT dealer or a company supplying

kits.

• Die folgende Abbildung zeigt einen typischen

Einbau. Dennoch müssen Sie entsprechend Ihrem

jeweiligen Auto Anpassungen vornehmen. Bei

irgendwelchen Fragen oder wenn Sie

Informationen hinsichtlich des Einbausatzes

brauchen, wenden Sie sich an ihren JVC

Autoradiohändler oder ein Unternehmen das diese

Einbausätze vertreibt.

• L’illustration suivante est un exemple d’installation

typique. Cependant, vous devez faire les

• Op de volgende afbeelding kunt u zien hoe de installatie,

normaal gesproken, in zijn werk gaat. U moet echter bij

de installatie rekening houden met de bijzonderheden

van uw eigen auto. Neem bij vragen of voor meer

bijzonderheden over inbouwpakketten contact op met uw

JVC car audio dealer of een dealer of een bedrijf dat

inbouwpakketten levert.

ajustements correspondant à votre voiture

particulière. Si vous avez des questions ou avez

besoin d’information sur des kits d’installation,

consulter votre revendeur d’autoradios JVC ou une

compagnie d’approvisionnement.

1 Voordat u aan de montage van het apparaat

1 Before mounting: Press

(control panel

release button) to detach the control panel if

already attached.

1 Vor dem Einbau: Drücken Sie

(Freigabe der 1 Avant le montage: Appuyer sur

(déblocage

du panneau de commande) pour éventeullement

détacher le panneau de commande.

begint: Druk op

(het bedieningspaneel

Schalttafel), um die Arretierung der Schalttafel zu

lösen, sofern diese bereits angebracht ist.

vrijgeven) als u het bedieningspaneel wilt loskoppelen

indien dit aan de eenheid is vastgekoppeld.

* When shipped from the factory, the control

panel is packed in the hard case.

* Lorsque ce panneau de commande sort d’usine,

il est rangé dans un étui de transport.

* Bei der Auslieferung ab Werk ist die Schalttafel

im Etui verpackt.

* Standaard wordt het bedieningspaneel bij het

verlaten van de fabriek los verpakt meegeleverd.

2 Remove the trim plate.

2 Retirer la plaque d’assemblage.

2 Den Frontrahmen herausnehmen.

2 Verwijder de sierplaat.

3 Remove the sleeve after disengaging the sleeve

3 Libérer les verrous du manchon et retirer le

Die Halterung nach dem Entriegeln der

Halterungensperren abnehmen.

3 Verwijder het huis nadat u de klemmen hebt

locks.

manchon.

losgemaakt.

1 Stand the unit.

1 Poser l’appareil à la verticale.

1 Das Gerät aufstellen.

1 Zet het apparaat rechtop.

Note: When you stand the unit, be careful not

to damage the fuse on the rear.

Remarque: Lorsque vous mettez l’appareil à la

verticale, faire attention de ne pas

endommager le fusible situé sur l’arrière.

Hinweis: Beim Aufstellen des Geräts darauf

achten, daß die Sicherung auf der Rückseite

nicht beschädigt wird.

Opmerking: Wanneer u het apparaat rechtop zet,

moet u erop letten dat u de zekering aan de

achterkant niet beschadigt.

2 Insert the 2 handles between the unit and the

sleeve, as illustrated, to disengage the sleeve

locks.

2 Insérer les 2 poignées entre l’appareil et le

manchon comme indiqué pour désengagé les

verrous de manchon.

2 Plaats de 2 hendels, zoals afgebeeld, tussen het

apparaat en het huis, om de klemmen los te

maken.

2 Die 2 Griffe zwischen dem Gerät und der

Halterung wie abgebildet einstecken und die

Halterungensperren entriegeln.

3 Remove the sleeve.

3 Retirer le manchon.

Note: Be sure to keep the handles for future

use after installing the unit.

3 Verwijder het huis.

3 Die Halterung entfernen.

Remarque: S’assurer de garder les poignées

pour une utilisation ultérieur, après l’installation

de l’appareil.

Opmerking: Bewaar de hendels nadat u het

apparaat hebt geïnstalleerd, zodat u ze ook in de

toekomst kunt gebruiken.

Hinweis: Sicherstellen, daß die Griffe für

künftigen Gebrauch nach dem Einbau des

Geräts aufbewahrt werden.

4 Install the sleeve into the dashboard.

* After the sleeve is correctly installed into the

dashboard, bend the appropriate tabs to hold

the sleeve firmly in place, as illustrated.

4 Installer le manchon dans le tableau de bord.

4 Installeer het huis in het dashboard.

4 Die Halterung im Armaturenbrett einbauen.

* Après installation correcte du manchon dans le

tableau de bord, plier les bonnes pattes pour

maintenir fermement le manchon en place,

comme montré.

* Nadat het huis op de juiste wijze in het dashboard is

geplaatst, moet u de palletjes, zoals afgebeeld,

stevig op hun plaats duwen.

* Nach dem korrekten Einbau der Halterung im

Armaturenbrett, die entsprechenden Riegel

umknicken, um die Halterung an ihrem Platz zu

sichern, siehe Abbildung.

5 Fix the mounting bolt to the rear of the unit’s

body and place the rubber cushion over the end

of the bolt.

5 Maak de bevestigingsbout aan de achterkant van het

apparaat vast en plaats de rubberdop over het uiteinde

van de bout.

5 Monter le boulon de montage sur l’arrière du corps

de l’appareil puis passer l’amortisseur en

caoutchouc sur l’extrémité du boulon.

6 Do the required electrical connections.

7 Slide the unit into the sleeve until it is locked.

5 Die Befestigungsschraube an der Rückseite des

Gerätekörpers befestigen und das Ende der

Schraube mit einem Gummipuffer abdecken.

6 Breng de vereiste elektrische verbindingen tot stand.

7 Schuif het apparaat in het huis totdat het vergrendeld is.

8 Bevestig de sierplaat zodanig dat het uitstekende deel

van de plaat aan de linkerkant van de eenheid vast

komt te zitten.

6 Réalisez les connexions électriques.

8 Attach the trim plate so that the projection on the

trim plate is fixed to the left side of the unit.

6 Nehmen Sie die erforderlichen elektrischen

7 Faire glisser l’appareil dans le manchon jusqu’à ce

Anschlüsse vor.

qu’il soit verrouillé.

9 Attach the control panel.

7 Das Gerät in die Halterung schieben, bis es einrastet.

8 Befestigen Sie die Frontrahmen in der Form, daß

der Fortsatz der Frontrahmen auf der linken Seite

des Geräts befestigt wird.

8 Attachez la plaque d’assemblage de façon que la

projection de la plaque d’assemblage soit fixée sur

le côté gauche de l’appareil.

9 Bevestig het bedieningspaneel.

9 Remonter le panneau de commande.

9 Die Schalttafel anbringen.

Trim plate

Frontrahmen

Plaque d’assemblage

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Sierplaat

Dashboard

Armaturenbrett

Tableau de bord

Dashboard

Handle

Griff

Poignée

Hendel

Rubber cushion

Gummipuffer

Amortisseur en caoutchouc

Rubberdop

184 mm

Sleeve

53 mm

Halterung

Manchon

Huis

Lock Plate

Arretierplättchen

Plaque de verrouillage

Vergrendelingsplaat

Mounting bolt

Slot

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Schlitz

Fente

Sleuf

Fuse

Sicherung

Fusible

Zekering

See “ELECTRICAL CONNECTIONS.”

Siehe „ELEKTRISCHE ANSCHLÜSSE“.

Référez-vous “RACCORDEMENTS

ELECTRIQUES” .

Zie “ELEKTRISCHE VERBINDINGEN”.

Trim plate

Control panel

Schalttafel

Frontrahmen

Plaque d’assemblage

Sierplaat

Panneau de commande

Bedieningspaneel

Sleeve

Halterung

Manchon

Huis

•When using the optional stay

•When installing the unit without using the sleeve

•Beim Einbau des Geräts ohne Halterung

•Beim Verwenden der Anker-Option

•Lors de l’utilisation du hauban en option

•Wanneer u de steun gebruikt (facultatief)

•Lors de l’installation de l’appareil scans utiliser de manchon

•Wanneer u het apparaat zonder huis installeert

In a Toyota for example, first remove the car radio and install the unit in its place.

Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.

Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.

Voorbeeld: Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren.

Washer

Unterlegscheibe

Rondelle

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

Stay (option)

Sluitring

Anker (Option)

Hauban (en option)

Steun (facultatief)

Fire wall

Feuerwand

Cloison

Brandscherm

* Not included with this unit.

* Nicht Teil dieses Geräts.

* Non fourni avec cet appareil.

* Niet meegeleverd.

Bracket*

Konsole*

Support*

Console*

Dashboard

Lock nut

Armaturenbrett

Tableau de bord

Dashboard

Sicherungsmutter

Ecrou d’arrêt

Contra-moer

Pocket

Taschen

Poche

Zak

Screw (option)

Schraube (Option)

Vis (en option)

Schroef (facultatief)

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

Bracket*

Konsole*

Support*

Console*

Sleeve

Halterung

Manchon

Huis

Mounting bolt

Note: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If longer screws

are used, they could damage the unit.

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Hinweis: Beim Anbringen des Gerät an der Konsole sicherstellen, daß 6 mm lange Schrauben verwendet

werden. Werden längere Schrauben verwendet, können sie das Gerät beschädigen.

Remarque: Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une

longueur de 6 mm. Si des vis plus longues sont utilisées, elles peuvent endommager l’appareil.

Opmerking: Wanneer u het apparaat aan de bevestigingsklem vastmaakt, moet u de 6 mm lange schroeven gebruiken. Als

u langere schroeven gebruikt, kan het apparaat worden beschadigd.

Removing the unit

Ausbau des Geräts

Retrait de l’appareil

Verwijderen van het apparaat

• Before removing the unit, release the rear section.

• Vor dem Ausbau des Geräts den hinteren Teil

freigeben.

• Avant de retirer l’appareil, libérer la section arrière.

• Voordat u het apparaat verwijdert, moet u het achtergedeelte

losmaken.

Remove the control panel.

Remove the trim plate.

Retirer le panneau de commande.

Die Schalttafel abnehmen.

Verwijder het bedieningspaneel.

Verwijder de sierplaat.

Retirer la plaque d’assemblage.

Den Frontrahmen herausnehmen.

Insert the 2 handles into the slots, as shown.

Then, while gently pulling the handles away from

each other, slide out the unit. (Be sure to keep

the handles after installing it.)

Introduire les 2 poignées dans les fentes, comme

montré. Puis, tout en tirant doucement les

poignées écartées, faire glisser l’appareil pour le

sortir. (S’assurer de conserver les poignées

après l’installation de l’appareil.)

Die 2 Griffe in die Schlitze wie gezeigt stecken.

Dann die Griffe behutsam auseinander ziehen und

das Gerät herausziehen. (Die Griffe nach dem

Einbau auf jeden Fall aufbewahren.)

Plaats de 2 hendels, zoals afgebeeld, in de sleuven.

Daarna duwt u de hendels zachtjes uit elkaar en kunt u

het apparaat naar buiten schuiven. (Bewaar de

hendels nadat u het apparaat hebt

geïnstalleerd!)

Control panel

Trim plate

Schalttafel

Panneau de commande

Bedieningspaneel

Frontrahmen

Plaque d’assemblage

Sierplaat

Handle

Griff

Poignée

Hendel

Teileliste für den Einbau und

Anschluß

Liste des pièces pour l’installation et Lijst van onderdelen die u bij

Parts list for installation and

connection

raccordement

installatie en aansluiting nodig hebt

Die folgenden Teile werden zusammen mit diesem

Gerät geliefert.

Nach ihrer Überprüfung, die Teile richtig einsetzen.

Les pièces suivantes sont fournies avec cet appareil.

Après vérification, veuillez les placer correctement.

De volgende onderdelen worden bij het apparaat geleverd.

Installeer ze op de juiste wijze, nadat u ze hebt

gecontroleerd.

The following parts are provided with this unit.

After checking them, please set them correctly.

Hard case/Control panel

Etui/Schalttafel

Etui de transport/Panneau de commande

Behuizing/Bedieningspaneel

Sleeve

Trim plate

Frontrahmen

Plaque d’assemblage

Sierplaat

Halterung

Manchon

Huis

Handles

Griffe

Poignées

Hendels

Mounting bolt (M5 x 20 mm)

Power cord

Stromkable

Cordon d’alimentation

Stroomkabel

Befestigungsschraube (M5 x 20 mm)

Boulon de montage (M5 x 20 mm)

Bevestigingsbout (M5 x 20 mm)

Rubber cushion

Gummipuffer

Amortisseur en caoutchouc

Rubberdop

Washer (ø5)

Unterlegscheibe (ø5)

Rondelle (ø5)

Sluitring (ø5)

Lock nut (M5)

Sicherungsmutter (M5)

Ecrou d’arrêt (M5)

Contra-moer (M5)

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN

To prevent short circuits, we recommend that you

disconnect the battery’s negative terminal and make

all electrical connections before installing the unit. If

you are not sure how to install this unit correctly, have

it installed by a qualified technician.

Zur Vermeidung von Kurzschlüssen empfehlen wir,

daß Sie den negativen Batterieanschluß abtrennen

und alle elektrischen Anschlüsse herstellen, bevor

das Gerät eingebaut wird. Sind Sie sich über den

richtigen Einbau des Geräts nicht sicher, lassen Sie

es von einem qualifizierten Techniker einbauen.

Pour éviter tout court-circuit, nous vous

recommandons de débrancher la borne négative de

la batterie et d’effectuer tous les raccordements

électriques avant d’installer l’appareil. Si l’on n’est pas de auto installeert. Als u niet zeker weet hoe u dit apparaat

sûr de pouvoir installer correctement cet appareil, le

Om kortsluiting te voorkomen adviseren wij u om de

minpool van de accu los te maken en alle elektrische

verbindingen tot stand te brengen voordat u het apparaat in

moet installeren, kunt u dit beter door een daartoe

gekwalificeerde technicus laten doen.

faire installer par un technicien qualifié.

Note:

This unit is designed to operate on 12 V DC,

NEGATIVE ground electrical systems. If your

vehicle does not have this system, a voltage inverter

is required, which can be purchased at JVC IN-CAR

ENTERTAINMENT dealers.

Hinweis:

Remarque:

Opmerking:

Dieses Gerät ist für einen Betrieb in elektrischen

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt. Verfügt Ihr Fahrzeug nicht über diese

Anlage, ist ein Spannungsinverter erforderlich, der

bei JVC Autoradiohändler erworben werden kann.

Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE. Si votre véhicule n’offre pas ce type

d’alimentation, il vous faut un convertisseur de

tension, que vous pouvez acheter chez un revendeur

d’autoradios JVC.

Dit apparaat mag worden gebruikt bij elektrische systemen

die werken op 12 V gelijkstroom met negatieve

aarding. Als uw auto niet is uitgerust met een dergelijk

systeem, is een spanningsomzetter vereist. Dit instrument

kan worden aangeschaft bij JVC car audio dealers.

• Replace the fuse with one of the specified rating. If

the fuse blows frequently, consult your JVC IN-CAR

ENTERTAINMENT dealer.

• Die Sicherung mit einer der entsprechenden

Nennleistung ersetzen. Brennt die Sicherung

häufig durch, wenden Sie sich an ihren JVC

Autoradiohändler.

• Vervang de zekering door een exemplaar met het

aangegeven vermogen. Als de zekering vaak doorslaat,

moet u uw JVC car audio dealer raadplegen.

• Als u geluidsproblemen hebt…

De krachtschakeling van dit apparaat heeft een

ingebouwd geluidsfilter. In sommige voertuigen zijn

tikgeluiden of andere ongewenste geluiden te horen. Als

dit gebeurt, moet u de massaklem aan de

achterkant (zie aansluitingsschema) aan het chassis van

de auto vastmaken met behulp van een kortere en dikkere

kabel, zoals kopermanteldraad of tellerkabel. Als het

geluid niet verdwijnt, moet u contact opnemen met uw

JVC car audio dealer.

• Het maximum ingangsvermogen van de speakers moet

achterin niet meer dan 45 W zijn en voorin 45 W, met

een impedantie van 4 Ω tot 8 Ω.

• Zorg ervoor dat dit apparaat door middel van

een aardkabel is verbonden met het chassis van

de auto.

• Remplacer le fusible par un de la valeur précisée. Si

le fusible saute souvent, consulter votre revendeur

d’autoradios JVC.

• If noise is a problem...

This unit incorporates a noise filter in the power

circuit. However, with some vehicles, clicking or

other unwanted noise may occur. If this happens,

connect the unit’s rear ground terminal (see

connection diagram) to the car’s chassis using

shorter and thicker cords, such as copper braiding

or gauge wire. If noise still persists, consult your

JVC IN-CAR ENTERTAINMENT dealer.

• Sind Störgeräusche ein Problem...

• Si le bruit est un problème...

Dieses Gerät enthält ein Störfilter im Stromkreis. Bei

manchen Fahrzeugen kann jedoch ein Klicken

oder andere unerwünschte Störgeräusche

auftreten. Sollte das der Fall sein, die hintere

Erdungscanschlußklemme (siehe Schaltplan) des

Geräts am Fahrwerk des Fahrzeugs anschließen,

dabei kürzere und dickere Kabel wie

Cet appareil incorpore un filtre de bruit dans le

circuit d’alimentation. Cependant, avec certains

véhicules, quelques claquements ou autres bruits

non désirés risquent de se produire. Si cela arrive,

raccorder la borne arrière de masse de l’appareil

au châssis de la voiture (voir le diagramme de

raccordement) en utiliscant des cordons les plus

gros et les plus courts possibles telle qu’une barre

de cuivre ou une tresse. Si le bruit persiste,

consulter votre revendeur d’autoradios JVC.

• Maximum input of the speakers should be no more

than 45 W at the rear and 45 W at the front, with an

impedance of 4 Ω to 8 Ω.

• Be sure to ground this unit to the car’s chassis.

• The heat sink becomes very hot after use. Be

careful not to touch it when removing this unit.

beispielsweise Kupfergeflechtdraht oder Stahldraht

verwenden. Bleibt Störgeräusch bestehen, wenden

Sie sich an Ihren JVC Autoradiohändler.

• Maximale Eingangsleistung der Lautsprecher nicht • La puisscance admissible des enceites devrait

sein sollte mehr als 45 W hinten und 45 W vorne

sein, mit einer Impedanz von 4 Ω bis 8 Ω.

• Sicherstellen, daß das Gerät am Fahrwerk

geerdet wird.

n’être pas plus qu’ c 45 W à l’arrière et à 45 W

l’avant, avec une impédance de 4 Ω à 8 Ω.

• S’assurer de raccorder la mise à la masse de

cet appareil au châssis de la voiture.

• Le dissipateur de chaleur devient très chaud après

usage. Faire attention de ne pas le toucher en

retirant cet appareil.

Heat sink

Abstrahlblech

Dissipateur de

chaleur

• De warmte-opnemer kan na gebruik erg heet worden.

Raak de warmte-opnemer niet aan wanneer u dit apparaat

van zijn plaats haalt.

• Das Abstrahlblech wird nach dem Gebrauch sehr

heiß. Beim Ausbau des Geräts darauf achten, das

Abstrahlblech nicht zu berühren.

Warmte-opnemer

A Typical Connections / Typische Anschlüsse / Raccordements typiques / Normale verbindingen

Before connecting: Check the wiring in the vehicle

carefully. Incorrect connection may cause serious

damage to this unit.

The leads of the power cord and those of the connector

from the car body may be different in color.

Vor dem Anschließen: Die Verdrahtung im Fahrzeug

sorgfältig überprüfen. Falsche Anschlüsse können

ernsthafte Schäden am Gerät hervorrufen.

Die Leiter des Stromkabels und die Leiter des Anschlusses

im Fahrzeug können sich farblich unterscheiden.

Avant de commencer la connexion: vérifiez

Alvorens de verbindingen tot stand te brengen: moet

attentivement le câblage du véhicule. Une connexion

u de bedrading in de auto zorgvuldig. Het apparaat kan door

incorrecte peut endommager sérieusement l’appareil. verkeerde verbindingen ernstige schade oplopen.

Le fil du cordon d’alimentation et ceux des connecteurs

du châssis de la voiture peuvent être différents en couleur.

De draden van het stroomsnoer verschillen mogelijk van

kleur metde aansluitingen op het chassis van de auto.

1 Die farbigen Leitungen des

1 Sluit de gekleurde snoerdraden van de stroomkable in de

hierna genoemde volgorde aan op de accu van de auto, de

luidsprekers en de antenne (indien aanwezig).

1 Connectez les fils de couleur du cordon

d’alimentation à la batterie de la voiture, aux

enceintes et à l’antenne automatique (s’il y en a

une) dans l’ordre suivant.

1 Connect the colored leads of the power cord to the

car battery, speakers and power aerial (if any) in

the following sequence.

Spannunsgversorgungskabels an der

Autobatterie, den Lautsprechern und dem

Motorantenne (sofern vorhanden) in folgender

Reihenfolge anschließen.

1 Zwart: aarde

1 Black: ground

2 Geel: naar de accu van de auto (constant 12 V)

3 Rood: naar de aansluitklem van de accessoire

4 Blauw met witte streep: naar de antenne

(Max. 200 mA)

5 Bruin: Naar het mobiele-telefoonsysteem (Lees voor

meer informatie de instructies die bij de mobiele

telefoon worden geleverd.)

1 Noir: a la masse

2 Jaune: a la batterie de la voiture (12 V

constant)

3 Rouge: à la prise accessoire

4 Bleu avec bande blanche: à l’antenne

automatique (200 mA max.)

5 Marron: à un système de téléphone cellulaire

(Pour les détails, se référer aux instructions du

téléphone cellulaire.)

2 Yellow: to car battery (constant 12 V)

3 Red: to an accessory terminal

4 Blue with white stripe: to power aerial

(200 mA max.)

5 Brown: to cellular phone system (For details,

refer to the instructions of the cellular phone.)

6 Others: to speakers

1 Schwarz: Erdung

2 Gelb: an Autobatterie (konstant 12 V)

3 Rot: an Zubehöranschlußklemme

4 Blau mit weißem Streifen: an Motorantenne

(max. 200 mA)

5 Braun: an Mobiltelefon (Weitere informationen

entnehmen Sie bitte der Bedienungscanleitung

des Mobiltelefons.)

6 Andere: naar de speakers

2 Connect the aerial cord.

2 Sluit de antenne aan.

3 Finally connect the wiring harness to the unit.

6 Andere: an Lautsprecher

6 Autres: aux enceintes

3 Verbind de draadbundel daarna met het apparaat.

Note: If your vehicle does not have any accessory

terminal, move the fuse from the fuse position 1

(initial position) to fuse position 2, and connect the red

lead (A7) to the positive (+) battery terminal.

• The yellow lead (A4) is not used in this case.

2 Das Antennenkabel anschließen.

2 Connectez le cordon d’antenne.

Opmerking: Als uw voertuig niet beschikt over een

aansluitklem, moet u de zekering verplaatsen van stand 1

(beginstand) naar stand 2 en moet u de rode draad (A7) met

de pluspool (+) van de accu verbinden.

3 Finalement, connectez le faisceau de fils à

3 Die Kabelbäume am Gerät anschließen.

l’appareil.

Hinweis: Verfügt Ihr Fahrzeug nicht über eine

Zubehöranschlußklemme, die Sicherung von der 1.

Sicherungsposition (Erstposition) in die 2.

Sicherungsposition versetzen, die rote Leitung (A7)

an der (+) Batterieanschlußklemme anschließen.

• Die gelbe Leitung (A4) wird in diesem Fall nicht

verwendet.

Remarque: Si votre véhicule ne possède pas de

borne accessoire, déplacez le fusible de la position

de fusible 1 (position originale) à la position de fusible

2 et connectez le fil rouge (A7) à la borne positive (+)

de la batterie.

• In dit geval wordt de gele draad (A4) niet gebruikt.

• Le fil jaune (A4) n’est pas utilisé dans ce cas.

Rear ground terminal

Hintere

Erdungscanschlußklemme

Borne arrière de masse

Massaklem aan de achterkant

B1 B3 B5 B7

Fuse position 1

1. Sicherungsposition

Position de fusible 1

B2 B4 B6 B8

Fuse position 2

2. Sicherungsposition

Position de fusible 2

B1 B3 B5 B7

A5 A7

B2 B4 B6 B8

Zekering, stand 1

A2 A4

A5 A7

Zekering, stand 2

A2 A4

15 A fuse

Not included with this unit.

Ignition switch

Zündschalter

Interrupteur d’allumage

Ontstekingsschakelaar

Line out

(see diagram

Schutz kappen

Signalausgang

(siehe Schaltplan

Sortie de ligne

(voir le diagramme

Uitgang

15 A Sicherung

Fusible 15 A

Zekering 15 A

Aerial terminal

Antennenanschlußklemme

Borne de l’antenne

Wird nicht mit Gerät mitgeliefert.

)

Non fourni avec cet appareil.

Niet bij het apparaat inbegrepen.

Aansluitpunt antenne

Black

Schwarz

Noir

)

To metallic body or chassis of the car

Zur metallenen Karosserie oder zum Fahrwerk des Autos

)

Vers corps métallique ou châssis de la voiture

Zwart

1 ^{Naar metalen ondergrond of chassis van de auto}

(zie schema

)

To a live terminal in the fuse block connecting to the car battery (bypassing

the ignition switch)

Zur einer stromführenden Anschlußklemme im Sicherungsblock zum

Anschließen an die Autobatterie (Umgehen des Zündschalters)

A une borne sous tension du porte-fusible connectée à la batterie de la

voiture (en dérivant l’interrupteur d’allumage)

Yellow*¹

To aerial

Gelb*¹

Jaune*¹

Geel *¹

Zur Antenne

A l’antenne

Naar de antenne

Red

Rot

*1: Before checking the operation of this unit prior to

installation, this lead must be connected, otherwise

power cannot be turned on.

*1: Vor der Überprüfung der Funktionsfähigkeit des

Geräts vor dem Einbau, muß diese Leitung

angeschlossen werden, da sonst die

Stromversorgung nicht eingeschaltet werden kann.

*1: Pour vérifier le fonctionnement de cet appareil

avant installation, ce fil doit être raccordé, sinon

l’appareil ne peut pas être mis sous tension.

*1: Voordat u controleert of het apparaat werkt (alvorens het

te installeren), moet deze draad aangesloten zijn. Als dit

niet het geval is, kan de stroom niet worden

Naar een onder spanning staande aansluitklem in het zekeringblok die is aangesloten

op de accu van de auto (u passeert de ontstekingsschakelaar)

Rouge

Rood

Fuse block

To an accessory terminal in the fuse block

Sicherungsblock

Porte-fusible

Zekeringblok

Zur einer Zubehöranschlußklemme im Sicherungsblock

Blue with white stripe

Vers borne accessoire du porte-fusible

Naar een aansluitklem in het zekeringblok

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

To power aerial if any

Zur Motorantenne, sofern vorhanden

Vers l’antenne automatique s’il y en a une

Naar de antenne (indien aanwezig)

To cellular phone system

Zur Moblitelephon

Brown / Braun / Marron / Bruin

À un système de téléphone cellulaire

Naar het mobiele-telefoonsysteem

ingeschakeld.

White with black stripe

Weiß mit schwarzem

Streifen

Blanc avec bande noire

Wit met zwarte streep

White

Weiß

Blanc

Wit

Gray with black stripe

Grau mit schwarzem Streifen

Gris avec bande noire

Grijs met zwarte streep

Gray

Grau

Gris

Green with black stripe

Grün mit schwarzem Streifen

Vert avec bande noire

Groen met zwarte streep

Green Purple with black stripe

Purple

Lila

Violet

Paars

Grün

Lila mit schwarzem Streifen

Violet avec bande noire

Paars met zwarte streep

Vert

Grijs

Groen

Right speaker (rear)

Rechter Lautsprecher

(hinten)

Enceinte droit (arrière)

Rechterspeaker (achterin)

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Linker Lautsprecher (vorne)

Enceinte gauche (avant)

Linkerspeaker (voorin)

Rechter Lautsprecher (vorne)

Enceinte droit (avant)

Rechterspeaker (voorin)

Linker Lautsprecher (hinten)

Enceinte gauche (arrière)

Linkerspeaker (achterin)

PRECAUTIONS on power supply and VORSICHTSMASSREGELN beim

PRECAUTIONS sur l’alimentation et

la connexion des enceintes:

VOORZORGSMAATREGELEN bij het

verbinden van de

Anschließen der Stromversorgung

und Lautsprecher:

speaker connections:

stroomkabeldraad met de speakers:

• NE CONNECTEZ PAS les fils d’enceintes du

cordon d’alimentation à la batterie; sinon,

l’appareil serait sérieusement endommagé.

• Connectez correctement le fil noir (a la masse), le fil

jaune (a la batterie de la voiture,12 V constant) et le

fil rouge (à la prise accessoire).

• AVANT de connecter les fils d’enceintes du cordon

d’alimentation aux enceintes, vérifiez le câblage

des enceintes de votre voiture.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 1 ou Fig. 2 ci-

dessous, NE CONNECTEZ PAS l’appareil en

utiliscant ce câblage original des enceintes. Si

vous le faites, l’appareil sera sérieusement

endommagé.

Recommencez le câblage des enceintes de

façon que vous puissiez connecter l’appareil aux

enceintes comme montré sur la Fig. 3.

• DO NOT connect the speaker leads of the power

cord to the car battery; otherwise, the unit will

be seriously damaged.

• Connect the black lead (ground), yellow lead (to car

battery, constant 12 V), and red lead (to an

accessory terminal) correctly.

• BEFORE connecting the speaker leads of the power

cord to the speakers, check the speaker wiring in

your car.

– If the speaker wiring in your car is as

illustrated in Fig. 1 and Fig. 2 below, DO NOT

connect the unit using that original speaker wiring.

If you do, the unit will be seriously damaged.

Redo the speaker wiring so that you can connect

the unit to the speakers as illustrated in Fig. 3.

– If the speaker wiring in your car is as

illustrated in Fig. 3, you can connect the unit

using the original speaker wiring in your car.

– If you are not sure of the speaker wiring of your

car, consult your car dealer.

• Verbind de speakerdraden van de stroomkabel

NIET met de accu van de auto; als u dit wel doet,

zal het apparaat ernstige schade oplopen.

• Sluit de zwarte draad (aarde), de gele draad (naar de accu

van de auto, constant 12 V) en de rode draad (naar de

aansluitklem van de accessoire) op de juiste wijze aan.

• VOORDAT u de speakerdraden van de stroomkabel met

de speakers verbindt, moet u de bedrading van de

speakers in uw auto controleren.

– Als de bedrading van de speakers eruitziet

zoals hieronder staat afgebeeld in Fig. 1 en

Fig. 2, mag het apparaat NIET worden aangesloten

met behulp van deze oorspronkelijke

speakerbedrading. Als u dat wel doet, zal het apparaat

ernstige schade oplopen.

Pas de bedrading van de speakers aan, zodat u het

apparaat met de speakers kunt verbinden, zoals staat

afgebeeld in Fig. 3.

– Als de bedrading van de speakers eruitziet

zoals staat afgebeeld in Fig. 3, kunt u het

apparaat aansluiten met behulp van de oorspronkelijke

speakerbedrading in uw auto.

– Als u twijfels hebt over de speakerbedrading in uw

auto, moet u contact opnemen met uw autodealer.

• Die Lautsprecherleitungen des Netzkabels

NICHT an der Autobatterie anschließen, da

sonst das Gerät schwer beschädigt wird.

• Die schwarze Leitung (Erdung), die gelbe Leitung

(zur Autobatterie, konstant 12 V) und die rote

Leitung (zur Zubehöranschlußklemme) richtig

anschließen.

• VOR dem Anschließen der Lautsprecherleitungen des

Spannunsgversorgungskabels an die Lautsprecher, die

Lautsprecherverdrahtung in Ihrem Auto überprüfen.

– Ist die Lautsprecherverdrahtung wie unten in

„Fig. 1“ und „Fig. 2“ abgebildet, das Gerät

NICHT mit der Originalverdrahtung der

Lautsprecher anschließen, da sonst das Gerät

schwer beschädigt wird.

Die Lautsprecherverdrahtung erneuern, so daß Sie

das Gerät an den Lautsprechern wie in „Fig. 3“

abgebildet anschließen können.

– Ist die Lautsprecherverdrahtung in Ihrem Auto

wie in „Fig. 3“ abgebildet, können Sie das Gerät

mit der Originalverdrahtung der Lautsprecher in

Ihrem Auto anschließen.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 3, vous pouvez

connecter l’appareil en utiliscant ce câblage

original d’enceintes pour votre voiture.

– Si vous n’êtes pas sûrs du câblage d’enceintes de

votre voiture, consulter le concessionnaire de

votre voiture.

– Sind Sie sich über die Lautsprecherverdrahtung

in Ihrem Auto nicht sicher, wenden Sie sich an

Ihren Autohändler.

Fig. 1

Fig. 2

Fig. 3

Connecting the leads / Anschließen der Leitungen / Raccordement des fils / Aansluiting van de gekleurde draden

Twist the core wires when connecting.

Die Kerndrähte beim Anschließen verdrehen.

Torsader les âmes des fils en les raccordant.

CAUTION / VORSICHT / PRECAUTION / LET OP!:

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

• Zur Vermeidung eines Kurzschlusses die Anschlußklemmen der NICHT VERWENDETEN

Leitungen mit Isolierklebeband umwickeln.

Draai de kerndraden om elkaar heen wanneer u ze wilt aansluiten.

• Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont PAS utilisés avec de la bande

isolante.

• Om kortsluiting te voorkomen, moet u de aansluitklemmen van ONGEBRUIKTE gekleurde draden met

isolatieband bedekken.

Solder the core wires to connect them securely.

Die Kerndrähte anlöten, um sie fest anzuschließen.

Souder les âmes des fils pour les raccorder entre eux de

façon sûre.

Soldeer de kerndraden zodat ze stevig vast zitten.

B Connections Adding Other Equipment / Anschlüsse zum Hinzufügen von anderer Ausrüstung / Raccordement pour ajouter d’autres appareils /

Aansluitingen voor het toevoegen van andere apparatuur

Amplifier / Verstärker / Amplificateur / Versterker

You can connect an amplifier to upgrade your car

stereo system.

• Connect the remote lead (blue with white stripe) to

the remote lead of the other equipment so that it

can be controlled through this unit.

• Connect this unit’s line-out terminals to the

amplifier’s line-in terminals.

• Disconnect the speakers from this unit, connect

them to the amplifier. Leave the speaker leads of

this unit unused. (Cover the terminals of these

unused leads with insulating tape, as illustrated

above.)

Sie können einen Verstärker um Ihre Autostereoanlage zu Vous pouvez connecter un amplificateur pour

Het is mogelijk om uw autostereosysteem uit te breiden

met een versterker.

erweitern.

améliorer votre système autoradio.

• Schließen Sie das Fernbedienungskabel (blau mit

weißem Streifen) an das Fernbedienungskabel des

anderen Geräts an, so daß es über dieses Gerät

gesteuert werden kann.

• Connectez le fil de commande à distance (bleu

avec bande blanche) au fil de commande à

distance de l’autre appareil de façon qu’il puisse

être commandé via cet appareil.

• Raccorder les bornes de sortie ligne de cet appareil

aux bornes d’entrée ligne de l’amplificateur.

• Déconnectez les enceintes de cet appareil et

connectez-les à l’amplificateur. Laissez les fils

d’enceintes de cet appareil inutilisés. (Recouvrir

les extrémités de ces fils inutilisés avec de la

bande isolante comme montré ci-dessus.)

• Verbind de externe kabel (blauw met witte streep) met

de externe kabel van het andere apparatuur zodat deze

op afstand vanaf deze apparaat kan worden bediend.

• Verbind de uitgang van het apparaat met de ingang van

de versterker.

• Koppel de speakers van dit apparaat los en

verbind ze aan de versterker. Gebruik de

speakerdraden van dit apparaat niet. (Plak de

aansluitklemmen van deze speakerdraden met

isolatieband af zoals hierboven is afgebeeld.)

• Die Anschlußklemmen am Ausgang dieses Gerät

an den Anschlußklemmen des Eingangs des

Verstärkers anschließen.

• Die Lautsprecher von diesem Gerät abtrennen

und am Verstärker anschließen. Die

Lautsprecherleitungen dieses Geräts unbenutzt

lassen. (Die Anschlußklemmen dieser nicht

verwendeten Leitungen mit Isolierklebeband

umwickeln, siehe Abbidung oben.)

Rear speakers

Hintere Lautsprecher

Enceintes arrière

Achterspeakers

Y-connector (not supplied with this unit)

Y-Anschluß (nicht mit diesem Gerät mitgeliefert)

Connecteur Y (non fourni avec cet appareil)

Y-connector (niet meegeleverd)

Remote lead

Fernbedienungsleitung

Fil d’alimentation à distance

Externe kabel

INPUT

JVC Amplifier

JVC Verstärker

JVC Amplificateur

JVC Versterker

Blue with white stripe

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

To power aerial if any

Signal cord (not supplied with this unit)

Zur Motorantenne, sofern vorhanden

Vers l’antenne automatique, s’il y en a une

Naar de antenne (indien aanwezig)

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (niet meegeleverd)

LINE OUT

*2: Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place not coated with paint (if coated

with paint, remove the paint before attaching the wire). Failure to do so may cause damage to this unit.

*2: Verbinden Sie den Erdungsleiter mit der Karosserie oder dem Rahmen des Fahrzeugs. Die Kontaktstelle darf nicht

lackiert sein (sollte die Kontaktstelle lackiert sein, entfernen Sie den Lack der Kontaktstelle, bevor Sie den Leiter

befestigen). Wenn der Erdungsleiter nicht ordnungsgemäß angeschlossen wird, kann dieses Gerät beschädigt werden.

*2: Attachez solidement le fil de mise à la masse au châssis métallique de la voiture—à un endroit qui n’est pas recouvert de

peinture (s’il est recouvert de peinture, enlevez d’abord la peinture avant d’attacher le fil). L’appareil peut être endommagé

si cela n’est pas fait correctement.

KD-S735R

REAR

Front speakers

Vordere Lautsprecher

Enceintes avant

Voorspeakers

*2: Bevestig de aardedraad goed met een metalen onderdeel of het chassis van de auto—bevestig op een niet-gelakt gedeelte (indien gelakt,

schuur dan af alvorens de draad te bevestigen). Het toestel kan worden beschadigd indien de aardedraad niet goed is aangesloten.

FEHLERSUCHE

EN CAS DE DIFFICULTES

PROBLEMEN OPLOSSEN

TROUBLESHOOTING

• The fuse blows.

• Die Sicherung brennt durch.

* Sind die roten und schwarzen Leitungen richtig

angeschlossen?

• Le fusible saute.

• De zekering slaat door.

* Zijn de rode en de zwarte draden op de juiste manier

aangesloten?

* Les fils rouge et noir sont-ils racordés correctement?

* Are the red and black leads connected correctly?

• L’appareil ne peut pas être mise sous tension.

* Le fil jaune est-elle raccordée?

• Power cannot be turned on.

* Is the yellow lead connected?

• De stroom kan niet worden ingeschakeld.

* Is de gele draad aangesloten?

• Stromversorgung kann nicht eingeschaltet

werden.

* Ist die gelbe Leitung angeschlossen?

• Pas de son des enceintes.

* Le fil de sortie d’enceinte est-il court-circuité?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Er komt geen geluid uit de speakers.

* Is de uitgaande speakerdraad kortgesloten?

• Kein Ton aus den Lautsprechern.

* Ist die Lautsprecherausgangsleitung

kurzgeschlossen?

• Le son est déformé.

• Sound is distorted.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

• Het geluid wordt vervormd.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded

in common?

* Is de uitgaande speakerdraad geaard?

* Zijn de minpolen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

• Ton verzerrt.

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

• L’appareil devient chaud.

• Unit becomes hot.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

• Het apparaat raakt verhit.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded

in common?

* Is de uitgaande speakerdraad geaard?

* Zijn de minpolen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

• Gerät wird heiß.

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

Nikon Cell Phone Accessories V2 User Manual
Life is good Lg 8x Ultra Slim Dvd Rw External Usb GP60NS50 User Manual
JVC KD MX2900R User Manual
HTC EVO 4G PC36100 User Manual
HP Hewlett Packard 8505 8 mm User Manual
FieldServer Lutron Machine FS 8700 97 User Manual
Farenheit Technologies DVD 16TM User Manual
Emerson SB110A User Manual
Curtis RS57A User Manual
ABB TPS61 R User Manual