|
Getting to know your communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Upgrade information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Treo components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Inserting the SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Charging the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Using the stylus to get things done . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Elements of the communicator interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Moving around the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Displaying online tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Customizing your communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Connecting the HotSync cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Using desktop software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Palm Desktop software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Using your communicator with another PIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Using an e-mail application with your communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Entering Data in Your Communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using the communicator keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Typing capital letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Typing numbers and symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Typing accented characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Typing extended characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Using menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Using text ShortCuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using the onscreen keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Using your computer keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Importing data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Managing Your Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Opening applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Switching between applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Categorizing applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Changing the Applications Launcher display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Choosing preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Installing add-on applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Assigning a password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Applications Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PhoneBook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Date Book Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Blazer Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
SMS Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
To Do List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
CityTime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Expense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
SIM Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Common Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Editing records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Edit menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Other ways to delete records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Purging records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Categorizing records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
System-defined and user-defined categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Page 4
Contents
Looking up Contacts records in PhoneBook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Using Phone Number Lookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Sorting lists of records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Making records private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Hiding and masking private records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Attaching notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Choosing fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Application-Specific Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Using the Speed Dial view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Using the Contacts view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Using the Active Call view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
PhoneBook menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Working in Day View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Rescheduling an event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Changing the Date Book Plus view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Working in Week View with Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Working in Month View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Working with floating events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Using the Daily Journal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Using templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Date Book Plus menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Contents
Page 5
Blazer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Viewing web pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Working with bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Blazer menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
SMS Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Enabling SMS and SMS Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Receiving SMS messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
Viewing messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
Replying to messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
Creating SMS messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
Creating a message signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Creating boilerplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Copying and forwarding messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
Modifying messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
Resending messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
Sorting messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
Deleting messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
SMS Messaging menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
To Do List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
Setting priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
Setting a due date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Assigning a category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Checking off a To Do item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
To Do Show Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
To Do List menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
Reviewing memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
Memo Pad menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
CityTime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
Setting your home city . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
Selecting remote cities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
Adding cities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Selecting the Calculator mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Using the Basic Calculator buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Using the Advanced Calculator mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
Using the Advanced Calculator buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
Creating a custom view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
Calculator menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Page 6
Contents
Expense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
Changing the date of an Expense item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
Entering receipt details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Show Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161
Expense menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Copying entries from your Speed Dial list to your SIM card . . . . . . . . . . . . . . . . . . . . . . . .163
Copying entries from your SIM card to your Speed Dial list . . . . . . . . . . . . . . . . . . . . . . . .164
Deleting entries from your SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
Setting Preferences for Your Communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Viewing Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
Buttons Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
Connection Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
Connection Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
Setting wireless modem configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
Time, date, week start, and numbers formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
General Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
System, alarm, and game sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Network Preferences and TCP/IP software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Selecting a service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Selecting a connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
Adding telephone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
Creating additional service templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
Creating a login script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Deleting a service template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Network Preferences menu commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
TCP/IP troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
Owner Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
Contents
Page 7
Ringer Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
ShortCuts Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
Creating a ShortCut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
Editing a ShortCut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
Deleting a ShortCut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
Advanced HotSync® Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Selecting HotSync setup options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
Customizing HotSync application settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191
IR HotSync operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
Preparing your computer for infrared communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
Configuring HotSync Manager for infrared communication . . . . . . . . . . . . . . . . . . . . . . . .193
Performing an IR HotSync operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193
Returning to cable HotSync operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
Conducting a wireless HotSync operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
Preparing your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
Preparing your communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
Selecting the conduits for a wireless HotSync operation . . . . . . . . . . . . . . . . . . . . . . . . . .197
Performing a wireless HotSync operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
Creating a user profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
Maintaining Your Communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Caring for your communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
Battery considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
Resetting your communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202
Performing a soft reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202
Performing a warm (or safe) reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203
Performing a hard reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Operating problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
Tapping and keyboard problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
Wireless communication problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207
Application problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211
HotSync problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212
Beaming problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214
Password problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
Technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
Non-ASCII Characters for Login Scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Use of ^char . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217
Carriage return and line feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217
Literal characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217
Page 8
Contents
Advanced Call Forwarding Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Forwarding calls when your communicator is busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
Forwarding calls that you do not answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
Forwarding calls when your communicator is unreachable . . . . . . . . . . . . . . . . . . . . . . . . .220
General Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
Other Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221
Exposure To Radio Frequency Energy (SAR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221
Safety and General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222
Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Contents
Page 9
Page 10
Contents
Chapter 1
Introduction to Your
Treo™ 270 Communicator
This chapter explains the physical buttons and controls on your Treo™ 270 communicator, how
to use your communicator for the first time, and how to install Palm™ Desktop software and the
HotSync® Manager synchronization software so you can synchronize your communicator and
your computer.
Getting to know your communicator
What is a Treo communicator?
Your Treo communicator combines the power of a full-featured mobile phone, e-mail, SMS
messaging, a Palm OS® handheld, and the Internet in one compact and indispensable device.
With your Treo communicator, you can do everything you can do with your existing mobile phone
with greater speed and ease. You can store thousands of numbers in your PhoneBook and up to
50 speed dial entries, and dial any of them with just a few keystrokes. You can even set up a
3-way conference call by joining two calls and use the personal speakerphone for hands-free use
without a headset attachment.
Lighten your load. Everything you need is in one compact device. Your Treo communicator helps
you stay in touch. With instant access to your e-mail, you can send and receive e-mail from
anywhere, and use SMS messaging to exchange quick messages with other mobile phones on
your network. The award-winning Blazer® web browser gives you access to any site on the
Internet—not just a few optimized for mobile access; now you can download directions, confirm
flight reservations, find a restaurant, and check stock prices wherever you are. Everything you
need to stay organized is close at hand on your communicator, including popular Palm OS
applications such as Date Book Plus, PhoneBook, To Do List, Memo Pad and more.
To make sure you don’t lose any of this important information, you can synchronize your data with
desktop software on your computer so you always have a backup copy.
Chapter 1
Page 11
System requirements
To install and operate Palm Desktop software and the HotSync Manager synchronization
software, your computer system must meet the following requirements:
Minimum requirements
■
■
■
■
■
■
■
Mac OS 8.5 or later with USB port (for USB HotSync® cable)
Apple Macintosh or compatible computer with a PowerPC processor
8 MB RAM (memory) minimum, 16 MB recommended
25 MB available hard disk space
VGA monitor or better
CD-ROM drive (you can also download Palm Desktop software from www.handspring.com)
Mouse
Upgrade information
If you already own a Palm OS® handheld, Handspring recommends that you install the version of
Palm Desktop software that comes with your Treo communicator into the same folder as your
current Palm Desktop software. When you install the new version in the same folder as the
previous version, all your data is preserved. If you use another personal information manager
(PIM), you still need to install Palm Desktop software in order to update the HotSync Manager on
your computer.
You perform HotSync operations in exactly the same way, so you can quickly synchronize your
old data with your new communicator.
To upgrade:
1. Synchronize your old communicator with your old Palm Desktop software. This ensures that
the latest information from your communicator is on your desktop computer.
2. (Optional) To ensure against any data loss, go to the folder that stores Palm Desktop
software (this is usually the Handspring or Palm folder), copy (do not move) your user name
folder, and store the copy outside the Palm Desktop software folder.
3. Follow the installation instructions that begin on page 25. Be sure to install the new software
in the same folder as the old software.
4. Connect your new communicator to the HotSync cable and press the HotSync button on the
cable. If the User dialog box appears, select your user name.
5. Compare the applications on your old handheld and your new communicator.
6. Beam any third party applications that did not transfer from your old handheld to your new
communicator, or install them from the original files.
7. If any data for your third party applications did not transfer, beam it from your old handheld to
your new communicator.
Page 12
Introduction to Your Treo™ 270 Communicator
8. If you created a password on your old handheld, enter it on your new communicator.
Note: Records you previously marked Private remain marked Private, but you need to reenter a
password on your new communicator.
9. If you had any important settings on your old handheld, such as Network Preferences,
manually copy them from your old handheld to your new communicator.
Each device must have a unique name
After you complete the upgrade process described above, you have two devices with the same
name. This is an undesirable situation. Each device must have a unique name in order to prevent
unexpected results during HotSync operations and other complications.
We strongly recommend that you perform a hard reset on your old handheld. See page 203 for
details.
A hard reset not only erases all data from the old handheld; it also erases the name and makes
that handheld a clean slate, ready to receive a new name. The next time you perform a HotSync
operation with this old handheld, you are asked to give it a name. Be sure to give it a unique name.
Treo components
Locating front panel controls
Speaker
Screen
Headset jack
Rocker switch
Keyboard
Contrast/
Brightness control
Application
buttons
Option key
Microphone
Scroll buttons
Chapter 1
Page 13
Speaker
Functions as the earpiece on your Treo.
Headset jack
Enables you to connect a hands-free headset for use with the wireless
features. Use only headsets that are compatible with your communicator.
Rocker switch
Enables you to navigate on your communicator with just one hand. You can
use the rocker switch as an alternate method to perform a variety of tasks,
such as adjusting the call volume level on your phone. The rocker switch
functions change based on whether your communicator’s wireless mode is
on or off and which application you are using.
To use the rocker switch, roll the dial up or down, press it in and release it,
or press and hold it.
Contrast/
Brightness
control
Opens the Adjust Display dialog box where you can adjust the appearance
of your communicator screen for the clearest screen display. The contrast/
brightness control is activated by the Option key. See page 19 for
instructions.
Option key
Types the number/symbol, or activates the function, that appears in blue
on the key.
Microphone
Scroll buttons
Functions as the mouthpiece when you use the wireless phone features of
your Treo.
Displays text and other information that extends beyond the area of the
communicator screen. Pressing the bottom scroll button scrolls down to
view information below the viewing area, and pressing the top scroll button
scrolls up to view the information above the viewing area. The scroll
buttons also enable you to navigate between records in an application and
to adjust the volume during a call.
Application
buttons
Activates the applications that correspond to the icons on the buttons:
PhoneBook, Date Book Plus, Blazer (or another web browser installed by
details on reassigning these buttons to activate any application on your
communicator.
You can also use these buttons in combination with Option
other applications. See Chapter 4 in this guide for details.
to activate
Tip:
turns on your communicator and opens the corresponding
application.
Keyboard
Enables you to type letters, numbers and symbols on your communicator.
See Chapter 2 to learn how to enter information.
Communicator Displays the applications and information stored in your communicator. It
screen
is touch-sensitive and responds to the stylus.
Page 14
Introduction to Your Treo™ 270 Communicator
Locating top panel controls
Antenna
Power button
IR port
Stylus
Ringer switch
LED
Antenna
Stylus
Receives and sends wireless communication signals. The antenna does not
telescope out of your communicator.
To use the stylus, slide the stylus out of the slot, and hold it as you would a
pen or pencil.
Power
button
Turns your communicator and wireless mode on and off, and controls the
keyboard backlight. See page 18 for details.
IR port
Uses infrared technology to transmit data to and receive data from other
Palm OS devices. See the section that begins on page 76 for details. You
can also use the IR port to update the information between your
communicator and computer using HotSync technology. See the section that
begins on page 192 for details.
LED
Provides status information for your Treo based on the color of the light and
the blink state.
No light: Wireless mode off
Solid:
Connected to travel charger
Green = Fully charged
Red = Charging
Blinking: Wireless mode on
Green = In coverage area
Red = Out of coverage area
Double-blink red: Low battery
Ringer switch Controls the ringer setting. See page 186 for details on changing the
settings.
Note: Silencing the ringer turns off all system sounds, including alarms.
When you silence the ringer, Date Book Plus alarms vibrate.
Chapter 1
Page 15
Locating back panel components
Reset
button
SIM card door
Charger and
USB/serial
connector
SIM card door
Reset button
Secures your SIM (Subscriber Identity Module) card in your phone.
Under normal use, you should not have to use the reset button. See
Appendix A for information about when and how to use the reset button.
Charger and
USB/serial
connector
The connector that connects your communicator to the travel charger and
HotSync cable. The HotSync cable connects to a USB port or serial port
on your computer and enables you to synchronize the information
between your communicator and computer using HotSync technology.
Inserting the SIM card
The SIM card is a small rectangular plastic piece that contains your phone number and account
information. It is included with your wireless service provider’s documentation and is often
referred to as a “smartcard.” If a SIM card did not come with your communicator, your wireless
service provider will provide you with one when you subscribe to their service.
You must insert your SIM card into your communicator before you can use it for wireless
communications. Since calls are billed to your phone number, you can, however, move your SIM
card to any phone that uses a SIM card, and the calls will be billed to your account.
To insert the SIM card:
1. Remove the SIM door.
2. With the contacts face-up, align the notch on the SIM card with the notch on the door and
insert the SIM card into the slot on the door.
SIM door
SIM card
Notch
3. Replace the SIM door.
Page 16
Introduction to Your Treo™ 270 Communicator
Charging the battery
To use your communicator, you must connect the travel charger or the HotSync cable and charge
the battery. When you’re near your computer, connect your communicator to the HotSync cable
with the travel charger connected to a wall outlet as shown in the section that begins on page 23.
When travelling, connect the travel charger cable directly to your communicator as shown in this
section.
When wireless mode is on, a fully charged battery provides approximately 3 hours of talk time or
approximately one week of use in handheld mode.
If the battery drains to the point where your communicator does not turn on, it stores your data
safely for about three days. Therefore, we recommend that you charge the battery daily to avoid
potential data loss. See Appendix A for tips on extending the life of the battery.
To charge the battery with the travel charger:
1. Plug the travel charger into a wall outlet.
2. With the word “UP” facing up (as shown), connect the travel charger cable to the charger
connector on the bottom of your communicator.
LED
Tip:
The LED is solid red while your communicator charges. When the LED turns solid green,
your communicator is charged. It takes approximately 2 hours to charge a fully drained
battery.
Chapter 1
Page 17
Turning your Treo on and off
Your Treo communicator has two operating modes: a handheld mode and a wireless mode. You
can turn the handheld mode and the wireless mode on and off independent of each other. When
you turn on the handheld mode, you can use organizer applications such as Date Book Plus and
To Do List. When you turn on the wireless mode, you can make or receive calls. You can also turn
both modes on at the same time. When both the handheld and wireless modes are on, you can
use the organizer applications as well as send and receive calls.
To turn handheld mode on and off, do any of the following:
■
■
■
■
Open the lid to turn it on, or close the lid to turn it off.
Press the power button.
Press and release the rocker switch.
Press any application button on the front of your communicator.
To turn wireless mode on and off:
■
Press and hold the power button until you hear the confirmation tones to turn wireless mode
on and off. The ascending tone indicates wireless mode is now on and the descending tone
indicates wireless mode is now off.
Using the keyboard backlight
If you have difficulty seeing your communicator keyboard in dark environments, you can use the
backlight to illuminate the keyboard.
Note: When you turn on the keyboard backlight, the screen brightness automatically dims to
conserve battery power. If you have difficulty seeing the screen in well-lit environments,
be sure the keyboard backlight is off and adjust the display settings. See page 13 for
details.
To turn the keyboard backlight on and off:
■
Press the power button twice in quick succession.
Backlight tips:
■
The backlight dims when a call is in progress and you do not press any buttons or tap your
communicator screen for more than 30 seconds.
■
The backlight also turns off automatically (after a period of inactivity) with the Auto-off
feature. See page 173 for details.
Page 18
Introduction to Your Treo™ 270 Communicator
Adjusting the display
Depending on the lighting conditions or temperature of the environment where you use your
communicator, you may need to adjust the brightness and color saturation of the display.
The Adjust Display dialog box contains two sliders. The upper slider adjusts color saturation and
the lower slider adjusts brightness. The display usually looks best at maximum brightness but you
may want to decrease the brightness to conserve battery power.
To adjust the display:
1. Press Option
.
2. Type the letter Q.
3. Press the scroll buttons, or drag the top slider, to adjust the color saturation until you can see
the three shapes as distinctly as possible.
4. Hold Option
brightness
and press the scroll buttons, or drag the bottom slider, to adjust the screen
Tip:
You can also tap to the left or right of the sliders to fine tune the display settings.
to finish.
5. Press Space
Using the stylus to get things done
Like using a mouse to click elements on a computer screen, using the stylus to tap elements on
your communicator screen is a way to get things done on your communicator.
The first time you start your communicator, setup instructions appear on the screen. These
instructions include a calibration screen, or digitizer. Calibration aligns the internal circuitry of your
communicator with its touch-sensitive screen so that when you tap an element on the screen, the
communicator can detect exactly which task you want to perform.
Important:
Always use the point of the stylus for tapping the communicator screen. Never use
an actual pen, pencil, or other sharp object to tap the communicator screen.
With your communicator turned on, you can tap the communicator screen to perform many
operations, such as the following:
■
■
■
Open applications
Choose menu commands
Select options in dialog boxes
Just as you can drag the mouse to select text or move objects on your computer, you can also
drag the stylus to select text. You can also use the stylus to drag the slider of any scroll bar.
Chapter 1
Page 19
Elements of the communicator interface
Menu bar
Pick list
Check box
Command buttons
Menu bar A set of commands that are specific to the application. Not all applications have
a menu bar.
Command Tap a button to perform a command. Command buttons appear in dialog boxes
buttons
and at the bottom of application screens.
Check box When a check mark appears in a check box, the corresponding option is active. If
a check box is empty, tapping it inserts a check mark. If a check box is checked,
tapping it removes the check mark.
Pick list
Tap the arrow to display a list of choices, and then tap an item in the list to select it.
Slider
Previous/next
arrows
Scroll
bar
Previous/
Tap the up and down arrows to display the previous and next page of
next arrows information; tap the left and right arrows to display the previous and next record.
Scroll bar
Roll the rocker switch or press the scroll buttons on the front panel of your
communicator to scroll to the previous and next pages. To scroll the display one
line at a time, tap the top or bottom arrow.
You can also scroll by dragging the slider or by tapping the scroll bar just above
or below the slider to scroll to the previous or next page.
Page 20
Introduction to Your Treo™ 270 Communicator
Moving around the screen
You can move between entry fields, pick lists, check boxes, and other options by using the stylus,
the scroll buttons, or the rocker switch.
To move around the screen do one of the following:
■
Tap an item with the stylus.
■
Press the scroll buttons to scroll through the items on the screen.
Roll the rocker switch up or down to scroll through the items on the screen.
To learn how to move around the screen using the Treo keyboard, see page 30.
■
Tip:
Displaying online tips
Many of the dialog boxes that appear on your communicator contain an online Tips icon in the
upper-right corner. Online tips anticipate questions you have in a dialog box, provide shortcuts for
using the dialog box, or give you other useful information.
To display an online tip:
1. Tap the Tips icon
.
2. After you review the tip, hold Option
and press Return
to finish.
Customizing your communicator
You can customize your communicator by using the Preferences application. You can enter
personal information such as your name and address; change the time and date; view different
date and time formats when you travel; turn off sounds; configure your communicator to work with
a modem or network, and select ringer settings. See Chapter 7 for more information on
customizing your communicator.
To open the Preferences screens:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the Preferences icon
.
3. Tap the category pick list in the upper-right corner of the screen.
4. Tap the Preferences category you want to view.
Chapter 1
Page 21
The following procedures for setting the time and date give you an example of how to customize
your communicator. You make changes to the time and date in General preferences.
To set the current time:
1. Tap the Set Time box.
Tap here
2. Tap the up or down arrows to change the hour.
3. Tap each minute number, and then tap the arrows to change them.
4. Tap AM or PM.
Note: Your communicator can also display time based on a 24-hour clock. See page 172
for details.
5. Hold Option
and press Return
to finish.
To set the current date:
1. Tap the Set Date box.
2. Hold Option
and press a scroll button to scroll to the current year.
Tap arrows to select year
Tap to select month
Tap to select date
3. Hold Shift
and press a scroll button to scroll to the current month.
4. Type the number for the current date.
5. Press Space to select the date.
You can also select the date by tapping the screen as shown above.
Tip:
Page 22
Introduction to Your Treo™ 270 Communicator
Using the headset
You can connect a headset for hands-free operation. Your Treo is compatible with the included
headset and other headsets listed at www.handspring.com. If you need to use your phone while
driving and this is permitted in your area, we recommend using a headset.
Note: Treo is not compatible with three-pin (also called three-pole) style headsets. You can
determine whether a headset is a three-pin headset by counting the number of silver
rings on the headset pin. A three-pin headset has three rings.
To use the headset:
1. Connect the headset plug to the headset jack on the side of your communicator.
Speaker
Microphone
Headset
button
2. Place the speaker in your ear.
3. Press the headset button to perform any of the following functions:
■ Answer an incoming call (including an incoming call waiting call).
■ Switch between two active calls.
■ Place the second call on hold when you have two active calls.
■ Hang up an active call.
Connecting the HotSync cable
The HotSync cable that comes with your Treo enables you to charge your communicator battery
and to synchronize the information on your communicator using HotSync technology.
Chapter 1
Page 23
To connect the HotSync cable:
1. Connect the travel charger cable to the short end of the Hotsync cable. Be sure to match the
sides of the connectors labeled “UP.”
2. Connect the USB HotSync cable to a USB port on your computer.
3. Connect the long end of the HotSync cable to your communicator with the button facing up.
USB cable and port
Note: If you are unsure about the exact location of the USB port on your computer, refer to the
manual supplied with the computer.
4. Plug the travel charger into a wall outlet.
Tip:
The travel charger does not need to be plugged into a wall outlet to perform a HotSync
operation. However, if you want to use the HotSync cable to charge your Treo
communicator, you must plug the travel charger into a wall outlet.
Using desktop software
When you use desktop software with HotSync technology, you can do any of the following:
■
Work with your communicator applications on your computer. Most desktop software
applications duplicate many of the applications on your communicator, so you can view, enter,
■
Back up and synchronize data between your communicator and your computer.
Synchronization is a one-step procedure that ensures that changes you make on your
communicator or desktop software appear in both places. See the section that begins on
page 74 for details.
■
■
Configure the wireless data features of your Treo.
Import and export data, so you can easily transfer data from other desktop applications into
many of your applications. See the section that begins on page 34 for details.
■
Print data from your desktop software on any printer.
Page 24
Introduction to Your Treo™ 270 Communicator
Palm Desktop software
Your communicator comes with Palm Desktop software. Palm Desktop software includes many
of the same applications as your communicator: Daily Calendar (Date Book Plus), Contact List
(the Contacts view in PhoneBook), Task (To Do List), and Note (Memo Pad).
The following instructions guide you through installing Palm Desktop software. After installation,
refer to the online Help in Palm Desktop software for information about how to use the software.
Note: You must install the software that comes with your Treo communicator even if you
already installed Palm Desktop software for a previous Palm OS handheld.
To ensure a safe and uninterrupted installation of Palm Desktop software, please do not simply
place the files in their proper locations and to decompress the files.
To install Palm Desktop software:
1. Connect the HotSync cable. See page 23 for instructions.
2. Exit any open programs, including those that run at startup, and disable any virus-scanning
software.
3. Insert the Handspring CD-ROM into the computer’s CD-ROM drive.
4. Double-click the Handspring CD icon on the desktop.
5. Double-click the Installer icon to begin the installation process.
6. Follow the onscreen instructions to complete the installation and to configure your Treo for
wireless data communication.
When the set up process is done, the installation screen closes automatically.
Using your communicator with another PIM
If you prefer to use another personal information manager (PIM), you can use it if third-party
connection software, called a conduit, is available for your PIM. You must install the software that
came with your Treo communicator along with the conduit for your PIM to synchronize the data
between your communicator and your PIM. For information on conduit software, go to this web
site: www.handspring.com.
Using an e-mail application with your communicator
Your communicator comes with the One-Touch Mail™ by JP Mobile e-mail application.
Note: To use a wireless e-mail application, your wireless service provider must support data
services and it must be part of your service package (some wireless service providers may
require you to sign up for data services separately). You must also have an account
established with an ISP (Internet Service Provider). Many wireless service providers also
provide ISP services. If ISP information is available from your wireless service provider
when you configure your wireless communication settings with the Handspring CD-ROM,
the installation program sets up your communicator for use with that provider.
Chapter 1
Page 25
One-Touch Mail
One-Touch Mail is a wireless e-mail application that enables you to access your ISP (POP3
account) e-mail directly from your communicator. You may also be able to use One-Touch Mail
to access your corporate e-mail; contact your System Administrator for assistance.
To install One-Touch Mail, do one of the following:
■
■
Select the One-Touch Mail option when you configure the wireless communication features
using the Handspring CD-ROM.
If you already installed the desktop software from the Handspring CD-ROM but didn’t install
this application, double-click the Configure Your Treo icon in the Handspring folder.
Page 26
Introduction to Your Treo™ 270 Communicator
Chapter 2
Entering Data in Your Communicator
This chapter explains how to enter data into your Treo™ 270 communicator using each of the
following methods:
■
■
■
■
Using the communicator keyboard
Using the onscreen keyboard
Using your computer keyboard
Importing data
Using the communicator keyboard
The communicator keyboard is the primary method you’ll use to enter data into your
communicator. Each letter key on the keyboard has three functions:
Normal: Types a lowercase letter.
Shift: Types an uppercase letter.
Option: Types the number/symbol, or activates the function, that appears in blue on the key.
Y1 U2
3
6
#
"
P
R
F
T
I
E
O
W
S
Q
A
4
J 5
'
H
Backspace
Return
G
V
K
D
X
L
.
8
B7
9
N
C
M
Option
Z
0
Shift/Find
Menu/
...
Applications
ListType
Space
Typing capital letters
To type capital letters, you must first “shift” to caps and then type the character.
Note: Your communicator includes a feature that automatically capitalizes the first letter when
you create a new sentence or a new record (by tapping New or a blank line).
Chapter 2
Page 27
To type a single capital letter (Caps Shift):
1. Press Shift
:
When Caps Shift is active, an “up arrow” symbol appears in the lower-right corner of the Treo
screen. If you accidentally activate Caps Shift, press Shift
nothing for five seconds, it reverts to lowercase.
twice to cancel it, or if you do
Caps Shift
2. Type the letter you want to capitalize.
To enter only capital letters (Caps Lock):
1. Press Shift
twice.
When Caps Lock is active, an underlined “up arrow” symbol appears in the lower-right corner
of the communicator screen.
Caps Lock
2. Type the text you want to capitalize.
3. Press Shift
to turn off Caps Lock.
Typing numbers and symbols
Typing numbers and symbols with your communicator is similar to typing symbols on a computer
keyboard. You must first “shift” to option mode and then type the number or symbol strokes.
To enter a single number or symbol (Option Shift):
1. Press Option
.
When Option Shift is active, a dot appears in the lower-right corner of the Treo screen. If you
accidentally activate Option Shift, press Backspace
to cancel it.
Option Shift
2. Press the key where the number or symbol appears in blue.
To enter only numbers or symbols (Option Lock):
1. Press Option
twice.
2. Press the keys where the numbers or symbols appear in blue.
When Option Lock is active, an underlined dot appears in the lower-right corner of the Treo
screen.
Option Lock
3. Press Option
to turn off Option Lock.
Page 28
Entering Data in Your Communicator
Typing accented characters
The ListType feature enables you to enter accented characters. You can enter the following
accented letters:
à á ä â ã å ç è é ë ê ì í ï î ñ ò ó ö ô õ ù ú ü û ý ÿ
To enter accented characters:
1. Type the letter (uppercase or lowercase) to which you want to add an accent.
2. Press ListType
3. Use the scroll buttons to select the accent you want to apply.
4. Press Space to insert the accented character.
Tip:
.
You can also select the accented character you want to insert by repeatedly pressing
ListType
.
Typing extended characters
The ListType feature also enables you to enter many extended characters that are not on the
keyboard, such as currency symbols and emoticons. Extended characters are often found under
related characters. For example, the £ symbol is located under $.
To enter extended characters:
1. Position the cursor where you want to insert the extended character.
2. Type the base character associated with the extended character you want to insert:
Tip:
To view a list of available accented and symbol characters, press Menu
under Edit select Keyboard Help (/G).
and
Base
Symbols
Base
Symbols
Base
Symbols
character
character
character
a
A
b
B
c
O
p
P
r
.
,
æ
Ø
¶
? ! …
Æ
‚‚‚
¡
!
ß
ß
¶
?
:
®
®
¿
R
¢ © ^ ˆ
; :-) :-( ;-)
:-D
C
d
s
S
t
'
¢ © ^ ˆ
† ‡
ß š §
ß Š §
‘ ’ ‹ › ~ `
“ ” « »
£ ¥
"
D
$
† ‡ Ð
~ ™ † ‡
Chapter 2
Page 29
e
E
f
T
x
+
-
~ ™ † ‡
&
_ ~ • – —
\ ÷ ¦
‰
×
X
y
/
ƒ
×
F
l
%
#
(
ƒ
¥
Y
0
1
2
3
£
£
µ
µ
ø
¥
‰ º
¹ ¼ ½
²
=
L
<[{‹
m
M
o
)
>]}›
³
3. Press ListType
.
4. Use the scroll buttons to select the extended symbol you want to insert.
5. Press Space
Tip:
to insert the extended character.
and then press Space
To enter a tab, press Shift
.
Navigation keystrokes
In addition to character symbols, your communicator includes special keystrokes that you can use
to navigate within text or fields in your applications.
Note: Some applications may not support these navigation keystrokes.
Command
Keystrokes
Hold Option
Hold Option
Move cursor right
while pressing the bottom scroll button.
while pressing the top scroll button.
Move cursor left
Previous field
Next field
Press the top scroll button.
Press the bottom scroll button.
Affirm an action
Hold Option
and press Return . Use these keys instead of tapping
the following onscreen buttons: OK, Done, Yes, Next, Accept, Send, and
Dial.
Annul an action
Hold Option
and press Backspace
. Use these keys instead of
tapping the following onscreen buttons: Cancel, No, Previous, and
Reject.
Open or dial the
selected item
Press Space
or press Return
.
Page 30
Entering Data in Your Communicator
Using menus
Menus on your communicator are easy to use. Once you have mastered them in one application,
you can use them the same way in all other applications.
and menu commands vary depending on which part of the application you’re using. For example,
in Memo Pad, the menus are different for the Memo list screen and the Memo edit screen.
The menus of each application are illustrated in the section on that application in Chapter 6. The
Edit menu is described in the section that begins on page 60.
To use the menu bar:
1. Open an application (such as Memo Pad).
2. Press Menu
to open the menu bar.
Tip:
You can also open the menu bar by tapping the inverted tab at the top of any
application’s screen (except Calculator).
Inverted
tab
In this example, three menus are available: Record, Edit, and Options. The Record menu is
selected and contains the commands New Memo, Delete Memo, and Beam Memo.
3. Press the top scroll button to switch between menus.
4. Press the bottom scroll button to select a command within a menu.
5. Press Space
to run the selected command.
Tip: To close the menus without running a command, press Menu
again.
Keyboard shortcut menu commands
Most menu commands have an equivalent keyboard shortcut. The shortcut letters appear to the
right of the menu command names. Throughout this guide, the shortcut letters appear in
parentheses (/C) next to menu selection instructions.
Menu commands
Shortcut letters
Chapter 2
Page 31
To use keyboard shortcuts for menu commands:
1. Press Menu to open the menu bar.
2. Type the menu command shortcut letter.
For example, to choose Copy in the Edit menu, press Menu
followed by the letter “c.”
Tip:
When the menu bar is open, you can enter a shortcut letter for any menu item in the
current application view, not just the ones that appear on the current menu.
Using text ShortCuts
ShortCuts make entering commonly used words or phrases quick and easy. ShortCuts are similar
to the Glossary or Autotext features of some word processors.
Your communicator comes with several predefined ShortCuts, and you can also create your own.
Each ShortCut can represent up to 45 characters. For example, you might create a ShortCut for
your name, or for the header of a memo. See the section that begins on page 186 to learn about
creating your own ShortCuts.
Your communicator includes the following predefined ShortCuts:
Entry
ShortCut
Date stamp
Time stamp
Date / time stamp
Meeting
ds
ts
dts
me
br
Breakfast
Lunch
lu
Dinner
di
To use a ShortCut:
1. Type the letter s.
2. Press ListType
.
3. Use the scroll buttons to select the ShortCut symbol
.
Note: The ShortCut symbol appears by the cursor to show that you are in ShortCut mode.
4. Type the ShortCut characters.
Page 32
Entering Data in Your Communicator
Using the onscreen keyboard
You can open the onscreen keyboard anytime you need to enter text or numbers on your
communicator. When used in conjunction with the backlight, the onscreen keyboard is especially
useful for typing in the dark.
To use the onscreen keyboard:
1. Open a record in an application that requires you to enter data (such as Memo Pad).
2. Press Menu
.
3. Under Edit, select Keyboard (/K).
4. Tap the characters to enter text, numbers, and international characters.
Tab
Backspace
Caps lock
Caps shift
Carriage return
Tap here to display
alphabetic keyboard
Tap here to display
numeric keyboard
Tap here to display
international keyboard
Note: The onscreen keyboard also includes a dialog box for international characters. You
can switch among the three dialogs at any time to enter the exact text you need.
5. After you finish, tap Done to close the onscreen keyboard and place the text in the record.
Using your computer keyboard
most Personal Information Manager (PIM) applications. If you have a lot of data to enter, or prefer
to use the computer keyboard, you can use Palm™ Desktop software, or any supported PIM such
as Microsoft Outlook, to enter information. You can then perform a HotSync® operation to
synchronize the information on your computer with the information on your communicator. See
the section that begins on page 74 for details on HotSync operations.
Refer to Palm Desktop online Help or the documentation that came with your PIM software for
more information on entering data on your computer.
Chapter 2
Page 33
Importing data
If you have data stored in computer applications such as spreadsheets and databases, you can
transfer the data to your Treo communicator without having to key it in manually. Save the data
in one of the file formats listed below, import it into Palm Desktop software, and then perform a
HotSync operation to transfer the data to your communicator.
You can import data from any of the following PIM (personal information manager) products.
■
■
■
■
■
■
■
■
■
Address Book Plus
DateBook Pro
DayMaker
Dynodex
Meeting Maker
Now Contact
Now Up-to-Date
QuickDex
TouchBase Pro
Palm Desktop software can open Claris Organizer files directly; you do not need to import them.
To import data from PIM product files, you must export and save the entire file in text format first.
You can import fields from TouchBase Pro, DateBook Pro, DayMaker, and QuickDex files in the
proper order. You might have to adjust the field order of other PIM product files you import.
You can also import data from a FileMaker Pro database or a ClarisWorks database. In FileMaker
Pro, be sure to export the database to the Tab-Separated Text file type. In ClarisWorks, be sure
to save the database in ASCII text format and give it a different name so you don't overwrite the
original file.
You can import data from a Newton that uses Newton Operating System 1.0. Simply use the
Newton Connection Kit to export data from the Newton Names file, Date Book Calendar file, and
Notepad, and then import the resulting files into Palm™ Desktop software. The Newton
Connection Kit does not work with Newton Operating System 2.0.
To import data:
1. Export a text file from the other product.
2. Open Palm Desktop software.
3. From the File menu, choose Import.
4. Select the file you want to import.
5. Click Open.
Page 34
Entering Data in Your Communicator
6. In the Import dialog box, check each field name to be sure the correct data moves into the
correct fields.
■ To change the order of a field in the file you're importing into, move the pointer over a field
name in the Fields In list. When the pointer changes to double arrow, drag the name to a
new location.
■ To prevent information from being imported into a field, click the arrow between field
names. The arrow changes to a dotted line.
■ To view the information in the file you're importing from, click the Scan Data arrows to see
the information in each record.
7. From the Fields pop-up menu, choose the appropriate field.
8. From the Delimiters pop-up menu, choose the appropriate delimiter.
The field and delimiter are set automatically if you are importing a Claris Organizer, Touch-
Base Pro, DateBook Pro, DayMaker, or QuickDex file.
9. Click OK.
Chapter 2
Page 35
Page 36
Entering Data in Your Communicator
Chapter 3
Managing Your Applications
This chapter explains how to switch between applications on your Treo™ 270 communicator, how
to change application settings so they are personalized to your work methods, and how to
categorize applications so you view them in related groups.
Using the Applications Launcher
Your communicator is equipped with a variety of applications. All the applications installed on your
communicator appear in the Applications Launcher.
Opening applications
You can use the Applications Launcher to open any application installed on your communicator.
You can also open the four main applications — PhoneBook, Date Book Plus, Blazer® (or another
web browser installed by your wireless service provider), and SMS Messaging — with the
application buttons on the front panel of your communicator.
Tip:
When you press an application button on the front panel of your communicator, you have
instant access to the selected application. You don’t even need to turn on your
communicator first.
In addition to providing a way for you to open applications, the Applications Launcher displays the
current time, battery level, wireless signal status, and application category.
To open an application:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the icon of the application that you want to open. To see additional applications, press
the scroll buttons.
Tip:
To find an application quickly, you can type the first letter of its name. The Applications
Launcher scrolls to the first application with a name that begins with that letter. You can
also create categories and organize your applications by category. See page 38 for
details.
Chapter 3
Page 37
Switching between applications
When working in any application, press Option
and then press Menu
, or press an
application button on the front panel of your communicator to switch to another application. Your
communicator automatically saves your work in the current application and displays it when you
return to that application.
Categorizing applications
The category feature enables you to manage the number of application icons that appear
onscreen in the Applications Launcher. You can assign an application to a category and then
display a single category or all your applications.
To categorize an application:
1. Press Option
2. Press Menu
and then press Menu
to access the Applications Launcher.
again to open the menus.
3. Under App, select Category (/Y).
4. Tap the pick list next to each application to select a category.
Tip:
To create a new category, tap Edit Categories from the pick list. Tap New, enter the
category name. Hold Option and press Return twice to add the category.
5. Hold Option
and press Return
to finish.
To display applications by category:
1. Press Option and then press Menu
2. Do one of the following:
to access the Applications Launcher.
■ Hold Option
and press Menu
repeatedly to cycle through all your categories.
■ Tap the pick list in the upper-right corner of the screen and select the category you want
to display.
Page 38
Managing Your Applications
Changing the Applications Launcher display
By default, the Applications Launcher displays each application as an icon. As an alternative, you
can choose to show a list of applications. You can also choose to view the same category of
applications each time you open the Applications Launcher.
To change the Applications Launcher display:
1. Press Option
2. Press Menu
and then press Menu
to access the Applications Launcher.
again to open the menus.
3. Under Options, select Preferences(/R).
4. Tap the View By pick list and select List.
5. Hold Option
and press Return
to finish.
To open the Applications Launcher to the last opened category:
1. Press Option
2. Press Menu
and then press Menu
to access the Applications Launcher.
again to open the menus.
3. Under Options, select Preferences (/R).
4. Tap the Remember Last Category check box to select it.
5. Hold Option
and press Return
to finish.
Chapter 3
Page 39
Choosing preferences
You can set options that affect an entire application in the application’s Preferences dialog box.
To change preferences for an application:
1. Open an application.
2. Press Menu
.
3. Under Options, select Preferences (/R).
Note: Not all applications have a Preferences command.
4. Make changes to the settings.
5. Hold Option
and press Return
to finish.
Installing and removing applications
This section explains how to install and remove applications on your communicator and how to
remove Palm™ Desktop software from your computer.
Installing add-on applications
Your communicator comes with the PhoneBook, Date Book Plus, Blazer (or another web browser
installed by your wireless service provider), SMS Messaging, To Do List, Memo Pad, Expense,
Calculator, CityTime, SIM Book, and SIM Services applications installed and ready to use. The
Handspring CD-ROM also includes e-mail applications which you can install when you configure
the wireless portion of your communicator with the CD-ROM.
You can also install additional applications on your communicator, such as business applications,
games, and other software. The Install Handheld Files dialog box makes it easy to install software
on your communicator during a HotSync® operation. There are a variety of third-party applications
available for devices that use Palm OS software. To learn more about these applications, go to
the web site: www.handspring.com.
When you download an add-on application from the Internet, it is probably in a compressed format
such as a .zip or .sit file. If you have a decompression utility on your computer, use it to decompress
the .prc and .pdb files inside the compressed file. If you do not have a decompression utility,
search the Internet using phrases like 'zip decompression' or 'how to unzip'. This will lead you to
various third-party utilities that you can use to decompress any kind of compressed or
downloaded file--not just add-ons for your communicator. After you install the utility, you are ready
to decompress the add-on application files that you downloaded.
Note: Any applications that you install on your communicator resides in RAM memory; you can
delete them at any time.
To install add-on software on your communicator:
Tip:
You can also install an application by simply double-clicking the application’s icon.
1. Copy or download the application you want to install into the add-on folder in your Palm folder
on your computer.
Page 40
Managing Your Applications
Note: If the software you download is compressed, you need to decompress it into this
folder. If you prefer to place the application into another folder, you need to navigate
to that folder before you complete step 5.
2. Double-click the Palm Desktop icon on your desktop.
3. From the HotSync menu, choose Install Handheld Files.
Tip:
You can also access the Install Handheld Files dialog box by double-clicking any file
with a PRC file extension.
4. From the User pop-menu, select the name that corresponds to your Treo communicator.
5. Click Add to List.
6. Select the application(s) you want to install on your communicator.
7. Click Add File.
Chapter 3
Page 41
Note: Review the list of applications you selected in the Install Handheld Files dialog box.
If you do not want to install an application, select it, and then click Remove From List.
(This does not remove the application from your computer; it simply removes it from
the list of applications to install.)
8. Close the Install Handheld Files dialog box.
9. Perform a HotSync operation to install the application(s) you selected in step 6. See the
section that begins on page 74 for details.
Removing applications
In the event that you run out of memory or decide that you no longer need an application you
installed, you can remove applications from your communicator. You can remove only add-on
applications, patches, and extensions that you install; you cannot remove the applications that
reside in the ROM portion of your communicator.
To remove an add-on application:
1. Press Option
2. Press Menu
and then press Menu
to access the Applications Launcher.
again to open the menus.
3. Under App, select Delete (/D).
4. Tap the application that you want to remove.
5. Tap Delete.
6. Hold Option
and press Return
twice to finish.
7. Check the Backups folder (under your user name folder in the Palm folder) on your computer.
If you find a PRC file for the application you just removed, delete the PRC file from the
Backups folder.
Page 42
Managing Your Applications
Removing Palm Desktop software
Removing Palm Desktop software also removes HotSync Manager. If you remove this software
from your computer, you cannot synchronize your data. So, we highly recommend leaving Palm
Desktop software on your computer.
To remove Palm Desktop software:
1. Insert the Palm Desktop software CD-ROM into your computer’s CD-ROM drive.
2. Double-click the Handspring CD icon on the desktop.
3. Double-click the Installer icon.
4. Click Continue on the splash screen and on the Palm Computing Readme file screen.
5. Click Agree on the End User Software License Agreement screen.
6. In the Palm Desktop Installer window, select Uninstall from the pop-up menu in the upper-left
corner.
The Palm Desktop Installer shows the items you can uninstall.
7. Select all the items on the uninstall list by clicking the check box to the left of each selection.
8. Click Uninstall.
9. When prompted to select the files where your Palm files are installed, click the Palm folder.
Tip:
If you installed the Palm Desktop software in a different folder, use the file selector
to find the folder that contains these files.
10. Click Choose.
Security
Your communicator comes with a Security application so that unauthorized users cannot view the
entries you wish to protect.
In Security, you can do the following:
■
Mask or hide entries you define as private. The Mask option displays a gray bar over private
records, and the Hide option completely removes (hides) private records. See the section that
begins on page 71 for more information.
■
Assign a password to the Security viewing options. Assigning a password requires you to
enter a password to view masked or hidden private entries; not assigning a password enables
you (or anyone else) to view individual masked private entries by tapping them, and to view
all hidden or masked private entries by selecting Show Records in the Security dialog box.
■
Lock and turn off your communicator so that it does not operate until you enter the correct
password.
Chapter 3
Page 43
Assigning a password
You can assign a password to protect your private records and to lock your communicator.
To assign a password:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the Security icon
3. Tap the Password box.
4. Enter a password.
.
5. Hold Option
and press Return
.
Tap here
6. Enter the same password a second time.
7. Hold Option and press Return to finish.
Changing or deleting a password
Once you define a password for your communicator, you can change or delete it at any time. You
must enter the current password before you can change or delete it.
To change or delete your password:
1. Tap the Password box.
2. Enter the current password.
Tap here
3. Hold Option
and press Return
.
Page 44
Managing Your Applications
4. Do one of the following:
■ To change the password, enter the new password, and hold Option
and press
Return
.
■ To delete the password, tap Delete.
Locking your communicator
You can also lock your communicator so that you need to enter your password to operate it.
Important:
If you lock your communicator, you must enter the exact password to re-activate
your communicator. If you forget the password, you need to perform a hard reset to
resume using your communicator. Performing a hard reset deletes all the records
in your communicator; however, you can restore all previously synchronized data at
the next HotSync operation. See page 203 for details.
To lock your communicator with a password:
1. Assign a password.
2. Tap Lock & Turn Off.
Tap Lock &
Turn Off
3. Tap Off & Lock.
4. To start your communicator, turn it on, and then enter the password.
Chapter 3
Page 45
Recovering from a forgotten password
If you did not activate the Off & Lock feature and you forget your password, you can delete the
password from your communicator. Deleting a forgotten password also deletes all entries and
files marked as Private.
Important:
If you synchronize with your computer before deleting a forgotten password, your
communicator restores your private entries the next time you perform a HotSync
operation, but it does not restore the password.
To delete a forgotten password:
1. Tap the Password box.
2. Tap Lost Password.
Tap here
3. Hold Option
and press Return
for Yes.
Page 46
Managing Your Applications
Chapter 4
Applications Overview
This chapter briefly describes each application and how to open it. Your Treo™ 270 communicator
comes with these applications already installed:
■
■
■
■
■
■
■
■
■
■
■
PhoneBook
Date Book Plus
Blazer®
SMS Messaging
To Do List
Memo Pad
CityTime
Calculator
Expense
SIM Book
SIM Services
Chapter 4
Page 47
PhoneBook
PhoneBook enables you to make and receive telephone calls, and to keep names,
addresses, phone numbers, and other information about your personal or business
contacts.
In PhoneBook, you can do the following:
■
Store thousands of names, addresses, phone numbers, e-mail addresses, and more, in your
Contacts list.
■
■
Create up to 50 speed dial entries.
Dial numbers from the Dial Pad, your Speed Dial list, your Contacts list, or the Call History list
on your communicator.
■
■
Quickly look up, enter, or duplicate names, addresses, phone numbers, and other information.
Enter up to five phone numbers (home, work, fax, mobile, etc.) or e-mail addresses for each
name.
■
■
■
Attach a note to each Contacts entry, in which you can enter additional information about the
entry.
Assign Contacts entries to categories so that you can organize and view them in logical
groups.
Display a history list of your incoming and outgoing calls.
To open PhoneBook:
■
Press PhoneBook
. PhoneBook opens to display the Speed Dial view.
Y1 U2
"
P
3
6
#
'
R
F
T
E
I
O
W
S
Q
A
4
H
J 5
G
V
K
D
X
L
.
8
B7
9
N
C
M
Z
0
...
PhoneBook button
repeatedly to cycle through the Speed Dial, Dial Pad, Contacts,
Tip:
Press PhoneBook
and Call History views. Press and hold PhoneBook
called.
to redial the last number you
Page 48
Applications Overview
Date Book Plus
Date Book Plus lets you quickly and easily schedule appointments or any kind of activity
associated with a date and/or a time.
In Date Book Plus, you can do the following:
■
Enter a description of your appointment and assign it to a specific time and date.
■
Display a chart of your appointments for an entire week to easily spot available times and any
potential scheduling overlaps or conflicts, or display descriptions of your appointments for one
or two weeks.
■
Display a monthly calendar to quickly spot days where you have morning, lunch, or afternoon
appointments, or display a calendar for an entire year.
■
■
Display a list of both your appointments and your To Do items.
Create unscheduled events or To Do items that float from one day to the next until you
complete them.
■
■
Create a Daily Journal to track events with automatic time stamps.
Set an alarm to sound prior to the scheduled activity, and create reminders for events that are
based on a particular date, rather than time of day, such as birthdays and anniversaries.
■
Attach notes to individual events for a description or clarification of the entry in your Date
Book.
To open Date Book Plus:
■
Press Date Book Plus
. Date Book Plus opens to today’s schedule.
Y1 U2
"
P
3
6
#
'
R
F
T
E
I
O
W
S
Q
A
4
H
J 5
G
V
K
D
X
L
.
8
B7
9
N
C
M
Z
0
...
Date Book Plus button
Tip:
Press Date Book Plus
repeatedly to cycle through the Day, Week, Week with Text,
Month, Year, and List views.
Chapter 4
Page 49
Blazer Web Browser
Blazer is a wireless Internet browser that lets you browse your favorite web sites while
you’re on the go.
Note: To use Blazer, you must subscribe to data services from your wireless service provider,
and you must have an account established with an ISP (Internet Service Provider). Many
wireless service providers also provide ISP services. If ISP information is available from
your wireless service provider when you configure your wireless communication settings
with the Handspring CD-ROM, the installation program sets up Blazer for use with that
provider. If you already installed the desktop software from the Handspring CD-ROM but
didn’t configure the wireless communication settings, double-click the Configure Your
Treo icon in the Palm folder and follow the instructions on the screen
In Blazer, you can do the following:
■
■
■
Access the World Wide Web and display Internet content.
Create up to 100 bookmarks for quick and convenient access to your favorite web sites.
Navigate between web pages with familiar toolbar icons.
To open Blazer:
■
Press Blazer
. Blazer opens to display the Page view.
Note: If a different application appears when you press Blazer
, your wireless service
provider installed another application as the default web browser. To launch Blazer,
press Option
, press Menu
, and then tap the Blazer icon
.
Y1 U2
"
P
3
6
#
'
R
F
T
E
I
O
W
S
Q
A
4
H
J 5
G
V
K
D
X
L
.
8
B7
9
N
C
M
Z
0
...
Blazer button
repeatedly to toggle between the Page and Bookmark views.
Tip:
Press Blazer
Page 50
Applications Overview
SMS Messaging
SMS Messaging provides a way for you to exchange short text messages with other
people who use GSM mobile phones and subscribe to an SMS service. Some wireless
service providers also provide a gateway to communicate with e-mail addresses.
In SMS Messaging, you can do the following:
■
■
■
■
Send and receive short text messages.
Read incoming messages directly from the Inbox.
Create messages quickly with quick list address selection and boilerplate text.
Review messages you sent in the Sent folder.
To open SMS Messaging:
■
Press SMS Messaging
. SMS Messaging opens to display the Inbox view.
Y1 U2
"
P
3
6
#
'
R
F
T
E
I
O
W
S
Q
A
4
H
J 5
G
V
K
D
X
L
.
8
B7
9
N
C
M
Z
0
...
SMS Messaging button
repeatedly to cycle through the Inbox, Sent, and Pending
Tip:
Press SMS Messaging
views. However, if there are no messages in the Pending view, it does not cycle through
this view when you press the application button.
Chapter 4
Page 51
To Do List
To Do List is a convenient place to create reminders and prioritize the things that you
have to do.
In To Do List, you can do the following:
■
■
■
■
■
■
Make a quick and convenient list of things to do.
Assign a priority level to each task.
Assign a due date for any or all of your To Do items.
Assign To Do items to categories so that you can organize and view them in logical groups.
Sort your To Do items either by due date, priority level, or category.
Attach notes to individual To Do items for a description or clarification of the task.
To open To Do List:
1. Press Option
2. Press Date Book Plus
.
.
Tip:
You can also open To Do List by tapping the To Do List icon
Launcher.
in the Applications
To Do List displays the category of items you last viewed.
Page 52
Applications Overview
Memo Pad
Memo Pad provides a place to take notes that are not associated with records in other
applications such as Date Book Plus, PhoneBook, or To Do List.
In Memo Pad, you can do the following:
■
Take notes or any kind of message on your communicator.
■
Drag and drop memos into popular computer applications like Microsoft Word when you
synchronize using Palm™ Desktop software and HotSync® technology.
■
■
Assign memos to categories so that you can organize and view them in logical groups.
Take down phone numbers and other types of information. Later, you can copy and paste this
information to other applications.
To open Memo Pad:
1. Press Option
2. Press PhoneBook
.
.
Tip:
You can also open Memo Pad by tapping the Memo Pad icon
Launcher.
in the Applications
Memo Pad displays the category of memos you last viewed.
Chapter 4
Page 53
CityTime
CityTime helps you keep track of the time anywhere around the globe.
In CityTime, you can do the following:
■
■
■
■
Select a home city as a point of reference.
Display the day and time in four other cities simultaneously.
Add a definition for any city that isn’t in the default list.
Display sunrise and sunset information for your home city.
To open CityTime:
1. Press Option
.
2. Press Blazer
.
Tip:
You can also open CityTime by tapping the CityTime icon
Launcher.
in the Applications
Page 54
Applications Overview
Calculator
Calculator enables you to perform addition, subtraction, multiplication, division and a
variety of advanced math and scientific calculations.
In Calculator, you can do the following:
■
Select a view to perform specific types of calculations including: math, trigonometry, finance,
logic, statistics, weight/temp, length, area, and volume.
■
■
Store and retrieve values.
Display the last series of calculations, which is useful for confirming a series of “chain”
calculations.
■
■
Create a custom view with the buttons you use most often.
Switch to basic mode to perform simple calculations.
To open Calculator:
1. Press Option
2. Press SMS Messaging
.
.
Tip:
You can also open Calculator by tapping the Calculator icon
Launcher.
in the Applications
Tip:
Hold Option
and press SMS Messaging
repeatedly to toggle between Basic and
Advanced mode.
Chapter 4
Page 55
Expense
Expense lets you keep track of your expenses.
In Expense, you can do the following:
■
Record dates, types of expenses, amount spent, payment method, and other details
associated with any money that you spend.
■
■
■
■
Assign expense items to categories so that you can organize and view them in logical groups.
Keep track of vendors (companies) and people involved with each particular expense.
Log miles traveled for a particular date or expense category.
Sort your expenses by date or expense type.
To open Expense:
1. Press Option
.
2. Press Menu
.
3. Tap the Expense icon
.
Note: You cannot use the Macintosh version of Palm Desktop software to synchronize Expense
data between your communicator and your computer.
Page 56
Applications Overview
SIM Book
SIM Book enables you to view and manage the phone list on your SIM card.
In SIM Book, you can do the following:
■
Copy entries from your speed dial list to your SIM card so you can access your phone
numbers if you move your SIM card to another phone.
■
■
■
Copy entries from your SIM card to your speed dial list.
Delete entries from your SIM card.
Dial entries on your SIM card.
To open SIM Book:
1. Press Option
2. Press Menu
.
.
3. Tap the SIM Book icon
.
Chapter 4
Page 57
SIM Services
SIM Services enables you to access applications on your SIM card that are provided
by your wireless service provider.
Note:
Some wireless service providers do not put applications on the SIM card.
In SIM Services, you can do the following:
■
Access applications from your wireless service provider on your SIM card.
To open SIM Services
1. Press Option
2. Press Menu
.
.
3. Tap the SIM Srvcs icon
.
Page 58
Applications Overview
Chapter 5
Common Tasks
In addition to the wireless communication applications, your Treo™ 270 communicator also
includes a full suite of personal information manager (PIM) applications: Date Book Plus, the
Contacts view in PhoneBook, To Do List, Memo Pad, and Expense. This chapter provides
instructions on how to do tasks that are common to several applications. It’s easy to transfer what
you learn in one application to the other applications because the structure and behavior of all
these applications are quite similar.
Throughout this chapter, the term “record” is used to refer to an individual item in any of the PIM
applications: a single Date Book Plus event, Contacts entry in PhoneBook, To Do List item, Memo
Pad memo, or Expense item.
Creating records
You can use the following procedure to create a new record in Date Book Plus, the Contacts view
in PhoneBook, To Do List, Memo Pad, and Expense.
To create a record:
1. Open the application in which you want to create a record.
2. Do one of the following:
■ Start entering data (your communicator automatically creates a new record).
Tip:
To create another new record, press the bottom scroll button and begin entering data.
■ In Date Book Plus and Contacts view in PhoneBook only: Press Menu
and under
Record, select New… (/N).
■ Tap New.
3. In Date Book Plus only: Select start and end times for your event, and then hold Option
and press Return
.
4. Enter text for the record.
Note: You do not have to press Shift
to capitalize the first letter of the field. Your
communicator automatically capitalizes the first letter of each field (except numeric
and e-mail fields).
5. Use the scroll buttons, roll the rocker switch or tap a field directly to move between fields.
6. (Optional) Tap Details to select attributes for the record.
7. In Contacts view in PhoneBook only: Hold Option
and press Return
to finish.
There’s no need to save the record because your communicator saves it automatically.
Chapter 5
Page 59
Editing records
After you create a record, you can change, delete, or enter new text at any time. Two screen
features tell you when your communicator is in editing mode:
■
■
A blinking cursor
One or more edit lines
Blinking cursor
Edit line
Entering text
For information on how to enter text using the keyboard on your communicator, the onscreen
keyboard, or the keyboard attached to your computer, see Chapter 2.
Edit menu
The Edit menu is available with any screen where you enter or edit text. In general, commands
available in the Edit menu apply to text that you select (or highlight) in an application.
To select text in an application:
1. Tap the beginning of the text that you want to select.
2. Drag the stylus over the text to highlight it. You can drag across the text to select additional
words, or drag down to select a group of lines.
Tip:
To select a word, double-tap the word. To select a whole line, triple-tap the line.
The following commands may appear in an Edit menu:
Undo
Cut
Reverses the action of the last edit command. For example, if you used
Cut to remove text, Undo restores the text you removed. Undo also
reverses deletions done by using backspace.
Removes the selected text and stores it temporarily in the memory of your
communicator. You can paste the text you cut into another area of the
current application or into a different application.
Page 60
Common Tasks
Copy
Copies the selected text and stores it temporarily in the memory of your
communicator. You can paste the text that you copy into another area of
the current application or into a different application.
Paste
Inserts the text that you cut or copied at the selected point in a record. The
text you paste replaces any selected text. If you did not previously cut or
copy text, Paste does nothing.
Select All
Keyboard
Selects all of the text in the current record or screen. This enables you to
cut or copy all of the text and paste it elsewhere.
Opens the onscreen keyboard. When you finish with the onscreen
keyboard, hold Option
and press Return
to finish.
Keyboard Help
Opens screens that show many keyboard shortcuts and the base
characters associated with symbols and other extended characters. Use
this command anytime you need forget how to do something with the
keyboard.
Deleting records
To delete a record in any of the PIM applications:
1. Select the record you want to delete.
2. Press Menu
.
3. Under Record, select the Delete command (/D):
Date Book Plus: Delete Item
Contacts view in PhoneBook: Delete Contact
To Do List: Delete Item
Memo Pad: Delete Memo
Expense: Delete Item
A confirmation dialog box appears. If you want to save a copy of the deleted item to an archive
file in Palm Desktop software, be sure that the check box is checked. If you don’t want to save
a copy, tap the check box to remove the check.
4. Hold Option
and press Return
to finish.
If you choose to save a copy of the selected item, your communicator transfers it to the archive
file on your desktop the next time you perform a HotSync operation.
Chapter 5
Page 61
Other ways to delete records
You can also delete records in the following ways:
■
In the Details dialog box of the application, tap Delete, and then hold Option
Return to finish.
and press
■
Delete the text of the record.
Note: In Date Book Plus, if you delete the text of a repeating event, you delete all instances
of that event.
Purging records
Over time, as you use Date Book Plus, To Do List, and Expense, you’ll accumulate records in these
applications that have outlived their usefulness. For example, events that occurred months ago
remain in the Date Book Plus, and To Do items that you marked as completed remain in the list,
as do Expense items.
All these outdated records take up memory on your communicator, so it’s a good idea to remove
them by using Purge. If you think Date Book Plus or To Do List records might prove useful later,
you can purge them from your communicator and save them in an archive file.
Purging is not available in the Contacts view in PhoneBook or in Memo Pad. So you need to
delete outdated records from these applications individually.
To purge records:
1. Open the application.
2. Press Menu
.
3. Under Record, select Purge (/E).
A confirmation dialog box appears.
Date Book Plus: Tap the pick list and select how old a record must be to be purged. Purge
deletes repeating events if the last of the series ends before the date that you purge records.
Date Book Plus, To Do List: If you want to save a copy of the purged records to an archive
file on your desktop, be sure that the check box is checked. If you don’t want to save a copy,
tap the check box to remove the check box.
4. Hold Option
and press Return
to finish.
If you chose to save a copy of the purged records, your communicator transfers them to an archive
file on your desktop the next time you perform a HotSync operation.
Note: Purging does not happen automatically. You must use the Purge command to make it
happen.
Page 62
Common Tasks
Categorizing records
Categorize records in the Contacts view in PhoneBook, To Do List, Memo Pad, and Expense
applications so that they are grouped logically and are easy to review. (You can also categorize
applications. See page 37 for details.)
When you create a record, your communicator automatically places it in the category that is
currently displayed. If the category is All, your communicator assigns it to the Unfiled category.
You can leave an entry as Unfiled or assign it to a category at any time.
System-defined and user-defined categories
By default, your communicator includes system-defined categories, such as All and Unfiled, and
user-defined categories, such as Business and Personal.
You cannot modify the system-defined categories, but you can rename and delete the user-
defined categories. In addition, you can create your own user-defined categories. You can have
a maximum of 15 user-defined categories in each application.
The Contacts view in PhoneBook contains the QuickList user-defined category, in which you can
store the names, addresses, and phone numbers you might need in emergencies (doctor, fire
department, lawyer, etc.).
Expense contains two user-defined categories, New York and Paris, to show how you might sort
your expenses for different business trips.
Note: The illustrations in this section come from Memo Pad, but you can use these procedures
in all the applications in which categories are available. Categories are not available in
Date Book Plus.
To move a record into a category:
1. Open the record you want to categorize.
2. In Contacts view in PhoneBook only: Press Menu
Contact (/E).
, and under Record, select Edit
3. In the record view, tap the Category list to display the list of available categories.
Category list
4. Select the category for the record.
Tip:
You can also assign a record to a category by tapping the Details button, selecting a
category from the Category pick list in the Details dialog box, and then holding Option
and pressing Return
to finish.
Chapter 5
Page 63
To display a category of records:
1. Tap the category pick list in the upper-right corner of the list screen.
Category pick list
2. Select the category you want to view.
The list screen now displays only the records assigned to that category.
To define a new category:
1. Tap the category pick list in the upper-right corner of the screen.
Category pick list
2. Tap Edit Categories.
3. Tap New.
4. Enter the name of the new category.
Page 64
Common Tasks
5. Hold Option
and press Return
twice to finish.
You can assign any of your records to the new category.
To rename a category:
1. Tap the category pick list in the upper-right corner of the screen.
2. Tap Edit Categories.
3. Select the category that you want to rename, and then tap Rename.
4. Enter the new name for the category.
5. Hold Option
Tip:
and press Return
twice to finish.
You can group the records in two or more categories into one category by giving the
categories the same name. For example, if you change the name of the Personal
category to Business, all records formerly in the Personal category appear in the
Business category.
Finding records
Your communicator offers several ways to find information quickly:
■
All applications: The Find utility locates any text that you specify, always starting with the
current application.
■
Date Book Plus, To Do List, Memo Pad: The Phone Number Lookup feature displays the
Contacts view in PhoneBook and shows names and phone numbers for entries that have
phone numbers. You can add the information that appears in this list to a record.
Chapter 5
Page 65
■
■
PhoneBook: The Instant Lookup feature lets you scroll immediately to a Contacts record in
PhoneBook by entering the first few letters of a first or last name, or the first name initial and
the first few letters of a last name.
Expense: The Lookup feature displays the Contacts in PhoneBook that have data in the
Company field. You can add these names to a list of attendees associated with an Expense
record.
Looking up Contacts records in PhoneBook
When working with the Contacts view in PhoneBook, the buttons on your communicator make it
easy to navigate among your Contacts entries.
■
In the Contacts list screen, the scroll buttons move the highlight. Holding Shift
and
using the scroll buttons moves up or down an entire screen of records. If you press and hold
a scroll button, you accelerate the scrolling and display every third screen.
■
In the Contact View screen, the scroll buttons move to the previous or next Contacts record.
You can also use the Instant Lookup feature, from any of the PhoneBook views, to quickly scroll
to any of your Contacts entries.
To use Instant Lookup to find a Contacts record:
1. From the Speed Dial, Contacts, or Call History views in PhoneBook, enter one of the following
for the name you want to find:
■ First name initial and last name.
■ First name
■ Last name
For example, entering a “ca” displays “Chris Cadwell,” “David Cagle,” and “Carolyn Malestic”
as shown above. Entering “cmal” finds only “Carolyn Malestic.”
2. Use the scroll buttons to select the contact name.
3. Press Return
to view the contents of the record.
Page 66
Common Tasks
Using Find
You can use Find to locate any text that you specify, in any application.
To use Find:
1. Press Option
and then press Shift
to open the Find dialog box.
Tip:
If you select text in an application before you opening the Find dialog box, the
selected text automatically appears in the Find dialog box.
2. Enter the text that you want to find.
Find is not case-sensitive. For example, searching for the name “davidson” also finds
“Davidson.”
Find locates any word that begin with the text you enter. For example, searching for “plan”
finds “planet,” but not “airplane.”
3. Hold Option
and press Return
to start the search.
Find searches for the text in all records and all notes.
As your communicator searches for the text, you can tap Stop at any time. You may want to
do this if the entry you want appears before your communicator finishes the search. To con-
tinue the search after you tap Stop, tap Find More.
4. Tap the text that you want to review.
Using Phone Number Lookup
Phone Number Lookup displays the information you entered in the Contacts view in PhoneBook,
and it lets you add this information to a record.
To use Phone Number Lookup:
1. Display the record in which you want to insert a phone number. The record can be in Date
Book Plus, To Do List, or Memo Pad.
2. Press Menu
.
3. Under Options, select Phone Lookup (/L).
4. If your Contacts view in PhoneBook is sorted by last name, begin to spell the last name. If
your Contacts are sorted by first name, begin to spell the first name.
Chapter 5
Page 67
Note: The first initial and last name search in the PhoneBook Instant Lookup feature is not
available in the Phone Number Lookup feature.
Phone Number Lookup displays records that begin with the letters you enter based on the
sort method in your Contacts view in PhoneBook. For example, if your Contacts are sorted by
last name and you enter “su,” the list displays “John Sung” and “Mario Suarez.” If your Contacts
are sorted by first name, and your enter “su,” the list displays “Susan Smith” and “Suki
Sakimoto.”
5. Continue to spell the name you’re looking for, or when you see the name, scroll to it.
6. Press Space
or Return
.
The name you selected, along with the other information associated with it, is pasted into the
record you selected in step 1.
Phone Number Lookup tips
You can also enter the keyboard shortcut (/L) to activate the Phone Number Lookup feature in
the following circumstances:
■
While entering text: For example, if your Contacts view in PhoneBook is sorted by last name
and you want to insert the full name and phone number for someone with the last name
“Williams,” enter “Wi” and then the Phone Number Lookup keyboard shortcut (/L). Assuming
you have only one Contacts record with a last name that begins with “Wi,” your communicator
inserts the full name “Fred Williams” (and its associated information). If you have more than
one name that begins with “Wi,” the Phone Number Lookup screen appears and highlights
the first record that begins with “Wi.”
■
For selected text: Drag to highlight the text, and then enter the Phone Number Lookup
keyboard shortcut (/L). Your communicator replaces the selected text and adds the name
and its associated information.
Page 68
Common Tasks
Looking up names to add to expense records
In Expense, Lookup displays the names of Contacts entries in Phonebook that have data in the
Company field. You can add these names to a list of attendees associated with an Expense
record.
To add names to an Expense record:
1. Open the Expense record to which you want to add names.
2. Tap Details.
3. Tap Who.
Tap here
4. Tap Lookup.
The Attendees Lookup screen displays all the names of Contacts entries in Phonebook that
have data in the Company field.
5. Use the scroll buttons to select the name you want to add.
6. Press Space
or Return
.
The name appears in the Attendees screen.
7. Repeat steps 4 through 6 to add more names.
8. Hold Option
and press Return
twice to finish.
Chapter 5
Page 69
Sorting lists of records
You can sort lists of records in various ways, depending on the application. Sorting is available in
applications that have list screens: Contacts view in PhoneBook, To Do List, Memo Pad, and
Expense.
Note: You can also assign records to categories. See page 63 for details.
To sort records in To Do List and Expense:
1. Open the application to display the list screen.
2. Tap Show.
3. Tap the Sort by pick list and select an option.
4. Hold Option
and press Return
to finish.
To sort records in Contacts view in PhoneBook and Memo Pad:
1. Open the application to display the list screen.
2. Press Menu
.
3. Under Options, select Preferences (/R).
Memo Pad
Contacts
4. Do one of the following:
Contacts view in PhoneBook: Tap the setting you want.
Memo Pad: Tap the Sort by pick list and select Alphabetic or Manual.
5. Hold Option and press Return to finish.
To sort the Memo list manually, tap and drag a memo to a new location in the list.
Note: To make the list of your memos appear in Palm Desktop software as you manually sorted
it on your communicator, open Memo in Palm Desktop software, click Sort by, and then
select Order on Handheld.
Page 70
Common Tasks
Making records private
In all PIM applications, except Expense, you can make individual records private. Private records
remain visible and accessible, however, until you select the Security setting to hide or mask all
private records. See the section that begins on page 43 for details.
Hiding and masking private records
You can hide records that you mark as private. When you hide records, they do not appear
anywhere in the application. When you mask records, a visual placeholder appears where the
record would normally appear. If you define a password, you must enter it to display private
records.
Note: As a security measure, masked Contacts records are temporarily hidden when you search
for records. So you will not see a placeholder for these records when viewing the results
of a Lookup or Find request.
To make a record private:
1. Display the entry that you want to make private.
2. Tap Details.
3. Tap the Private check box to select it.
4. Hold Option
and press Return
to finish.
To hide or mask all private records:
1. Make sure the records you want to mask are marked private.
2. Press Option and then press Menu to access the Applications Launcher.
3. Tap the Security icon
.
4. Tap the Current Privacy pick list.
Tap here
5. Tap either Hide Records or Mask Records.
6. Hold Option
and press Return
to confirm that you want to change the security setting.
Chapter 5
Page 71
To display all private records:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the Security icon
.
3. Tap the Current Privacy pick list.
Tap here
4. Tap Show Records.
If you do not have a password, private records become visible.
If you have a password, the Show Private Records dialog box appears. Enter your password
in this dialog box, and then hold Option
and press Return
to finish.
To display a specific masked record:
1. Open the application that contains the record you want to view.
2. Tap the shaded bar that masks the record.
Tap here
Note: If you have a password, you must enter your password and then hold Option
Return to view the record.
and press
To display all private records in a specific application:
1. Open the application in which you want to display the records.
2. Press Menu
.
3. Under Options, select Security (/H).
4. Tap the Current Privacy pick list.
Page 72
Common Tasks
5. Tap Show Records.
6. Hold Option
and press Return
to finish.
Attaching notes
In all PIM applications except Memo Pad, you can attach a note to a record. A note can be up to
several thousand characters long. For example, for an appointment in Date Book Plus, you can
attach a note with directions to the location.
To attach a note to a record:
1. Display the entry to which you want to add a note.
2. In Contacts view in PhoneBook only: Press Menu
Contact (/E).
, and under Record, select Edit
3. Tap Details.
4. Tap Note.
5. Enter your note.
6. Hold Option
and press Return
to finish.
A small note icon appears at the right side of any item that has a note.
Note icon
To review or edit a note:
1. Tap the Note icon
.
To delete a note:
1. Tap the Note icon
.
2. Tap Delete.
3. Hold Option
and press Return
for Yes.
Chapter 5
Page 73
Choosing fonts
In all PIM applications except Expense, you can change the font style to make text easier to read.
You can choose a different font style for each application.
Small font
Bold font
Large font
To change the font style:
1. Open an application.
2. Press Menu
3. Under Options, select Font (/F).
4. Use the scroll buttons to select the font style you want to use.
.
Bold font
Large font
Small font
5. Hold Option
and press Return
to finish.
Exchanging and updating data:
HotSync operations
The HotSync process automatically synchronizes — that is, exchanges and updates — data
desktop software appear in both places after a HotSync operation. HotSync technology
synchronizes only the needed portions of files, thus reducing synchronization time. You can
synchronize your data directly by connecting your communicator to your computer with the
HotSync cable or by beaming the data from the IR port on your communicator to the IR port on
your computer, or indirectly with a modem or network. See Chapter 8 for information about
performing HotSync operations via the IR port, a modem, or a network.
Page 74
Common Tasks
Performing a HotSync operation for the first time
The first time you synchronize your data, you need to enter user information on both the
communicator and Palm Desktop software. After you enter this information and synchronize, the
HotSync Manager recognizes your communicator and doesn’t ask for this information again.
If you are a System Administrator preparing several communicators for a group of users, you may
want to create a user profile. See the section that begins on page 198 before performing the
following steps.
Important:
You must use the HotSync cable for your first HotSync operation.
The following steps assume that you have already installed the Palm Desktop software. If you
have not installed this software, see page 24 for instructions.
To perform a local HotSync operation:
1. Connect your communicator to the Hotsync cable. See the section that begins on page 23
for details.
2. If the HotSync Manager is not enabled, activate it: Open Palm Desktop software, from the
HotSync Menu, choose Setup. Click the HotSync Controls tab and select the Enabled option.
3. Press the HotSync button on the cable.
HotSync
button
4. From the Select User dialog box, choose the user name you assigned to your communicator.
The HotSync Progress dialog box appears and synchronization begins.
5. Wait for a message on your communicator indicating that the process is complete.
After the HotSync process is complete, you can remove your communicator from the cable.
Chapter 5
Page 75
Beaming information
Your communicator is equipped with an IR (infrared) port that you can use to beam information
to another Palm OS device that’s close by and also has an IR port. The IR port is located on the
top of your communicator, between the power button and the ringer switch, behind the small dark
shield.
You can beam the following information between Palm OS devices:
■
■
■
■
The record currently displayed in Date Book Plus, the Contacts view in PhoneBook, To Do
List, or Memo Pad
All records of the category currently displayed in the Contacts view in PhoneBook, To Do List,
or Memo Pad
A special record in the Contacts view of PhoneBook that you designate as your personal
An application installed in RAM memory
You can also use the infrared port to perform HotSync operations. See the section that begins
on page 192 for details.
To select a business card:
1. In the Contacts view in PhoneBook, create an entry that contains the information you want
on your personal business card.
2. Press Menu
3. Under Record, select Select Business Card.
4. Hold Option and press Return for Yes.
.
To beam a record, business card, or category of records:
1. Locate the record, business card, or category you want to beam.
2. Press Menu
.
Page 76
Common Tasks
3. Under Record, select one of the following:
The Beam command for an individual record (/B)
In the Contacts view in PhoneBook only: Beam Business Card (/M)
Beam Category (/Y)
4. When the Beam Status dialog box appears, point the IR port directly at the IR port of the
receiving communicator.
Tip:
For best results, the path between the two devices must be clear of obstacles. If you have
difficulty beaming information, see the troubleshooting tips that begin on page 214.
5. Wait for the Beam Status dialog box to indicate that the transfer is complete before you
continue working on your communicator.
To beam an application:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Press Menu
.
3. Under App, select Beam (/B).
4. Tap the application you want to transfer.
Note: Some applications are copy-protected and cannot be beamed. These are listed with
a lock icon next to them.
5. Tap Beam.
6. When the Beam Status dialog box appears, point the IR port directly at the IR port of the
receiving communicator.
7. Wait for the Beam Status dialog box to indicate that the transfer is complete before you
continue working on your communicator.
Chapter 5
Page 77
To receive beamed information:
1. Turn on your communicator.
2. Point the IR port directly at the IR port of the transmitting communicator to open the Beam
Status dialog box.
3. When the Beam dialog box appears, select a category for the entry.
Tip:
If you do not select a category the entry is placed in the Unfiled category.
and press Return for Yes.
4. Hold Option
Tip:
When you receive beamed information with the lid closed, you don’t need to respond
to the Beam dialog box; simply press the top scroll button for Yes, or the bottom scroll
button for No.
Page 78
Common Tasks
Chapter 6
Application-Specific Tasks
This chapter is organized by application and gives instructions on how to do tasks that are specific
to each of the following applications:
■
■
■
■
■
■
■
■
■
■
■
PhoneBook
Date Book Plus
Blazer®
SMS Messaging
To Do List
Memo Pad
CityTime
Calculator
Expense
SIM Book
SIM Services
Chapter 6
Page 79
PhoneBook
PhoneBook is the application where you store name and address information about people or
businesses, and where you place and receive telephone calls.
PhoneBook has five main views. You can place and receive calls from within any view, and you
can also receive calls when the screen is off (but wireless mode must be on). The sections that
follow explain how to use each of these views.
To change the PhoneBook view, do one of the following:
■
Repeatedly press PhoneBook
to cycle through the views.
■
Tap the icons in the lower-left corner of the PhoneBook screen.
Note: The Active Call icon and view appear only after you place an outgoing call or receive an
incoming call.
Dial Pad view
Speed Dial view
View
icons
Call History view
Active Call view
Contacts view
At the top of each view, many of the following common icons appear to provide wireless mode
status information for your phone:
Wireless mode on
Battery gauge
Voicemail notification icon
Network name
Signal strength icon
Note: Your wireless service provider may use a different voicemail notification method that
does not include the voicemail notification icon.
Page 80
Application-Specific Tasks
Using the Speed Dial view
You can store up to 50 phone numbers in the Speed Dial list. There are five pages of numbers
that hold ten numbers per page.
Tip:
You can keep your Speed Dial list organized by storing different types of numbers on
different pages. For example, create separate pages for family, business, friends, and
emergency numbers.
Defining a Speed Dial button
For each Speed Dial button you can assign a name, phone number, and extra digits such as an
extension. By default, the first slot on the first Speed Dial page is reserved for your wireless
service provider’s voicemail service number. If the voicemail number is pre-programmed on your
SIM card, you cannot delete this entry or change the phone number, but you can move the
voicemail entry to another button, rename it, and add Extra digits.
If the voicemail number is not pre-programmed on your SIM card, you can edit the voicemail entry
to enter the number.
To define a Speed Dial button:
1. Open the lid or press PhoneBook
if you are in another application.
2. Tap a blank Speed Dial button.
3. Enter the Name you want to assign to the button.
4. Press the bottom scroll button to move to the Number field and enter the phone number
associated with the button.
5. Press the bottom scroll button to move to the Extra Digits field and enter an extension
number or other additional digits if needed.
Tip:
To insert a pause between Extra digits when dialing, enter a comma (,). Each comma
represents a one second pause.
6. Hold Option
and press Return
to finish.
Chapter 6
Page 81
Adding Contacts list entries to your Speed Dial list
To save time while creating your Speed Dial list, you can add entries from your Contacts list.
To add an entry from your Contacts list to your Speed Dial list:
1. Tap a blank Speed Dial button.
2. Tap Lookup.
Tip:
You can also use the Phone Number Lookup feature to locate the entry you want to
add. See the section that begins on page 67 for details.
Tap Lookup
Tap Add
3. If your Contacts list is sorted by last name, begin entering the person’s last name. If your
Contacts list is sorted by first name, begin entering the person’s first name.
4. Select the entry you want to use and press Return
.
Tip:
You can edit the entry by tapping the number or name in the Edit Entry dialog.
5. In the Edit Entry dialog, hold Option
and press Return
to finish.
Calling a Speed Dial number
Speed dialing enables you to quickly place a call without entering the number. This is particularly
Speed Dial list using the hands-free headset.
To dial a number from the Speed Dial view:
1. Make sure wireless mode is on. See page 18 for details.
2. Press PhoneBook
.
3. Use the scroll buttons to select the Speed Dial button for the number you want to call.
Tip:
To jump to the next page of Speed Dial buttons, select the first button on the page
and press the top scroll button.
Page 82
Application-Specific Tasks
4. Press Space
to dial.
Tip: You can also tap the Speed Dial button for the number you want to call, or roll the
rocker switch to select the button and then press the rocker switch or Return
dial the number.
to
Selected
button
Tip:
During a call, if you are prompted to enter a menu selection, tap Dial Pad and then
enter the numbers you want with the keyboard. If you defined any Extra Digits, such
as an extension, tap Extra Digits.
5. Close the lid to end the call.
Changing a Speed Dial entry
You can change any of the information associated with a Speed Dial button.
Note: You cannot change the phone number for your wireless service provider’s voicemail
service. You can, however, rename, move, or add Extra Digits to this voicemail entry.
To change a Speed Dial entry:
1. From the Speed Dial view, press Menu
2. Under Edit, select Edit Speed Dial (/E).
3. Tap the entry you want to change.
.
Tap to view
more pages
4. In the Edit Entry dialog, enter the new information.
5. Hold Option
and press Return
twice to save the new information.
Chapter 6
Page 83
Deleting Speed Dial entries
If your Speed Dial list becomes full, or you no longer need an entry, you can delete it.
Note: You cannot delete the Speed Dial button for your wireless service provider’s voicemail
service.
To delete a Speed Dial entry:
1. From the Speed Dial view, press Menu
2. Under Edit, select Edit Speed Dial (/E).
3. Tap the entry you want to delete.
4. In the Edit Entry dialog, tap Delete.
.
5. Hold Option
and press Return
twice to confirm deletion.
Arranging the Speed Dial list
As your Speed Dial list grows, you may want to rearrange the entries. For example you might want
to store different types of numbers on different pages, or arrange the list alphabetically.
To arrange the Speed Dial list:
1. From the Speed Dial view, press Menu
.
2. Under Edit, select Edit Speed Dial (/E).
3. Drag the entries to the slot where you want them to appear.
Drag an entry to
another slot or
page
Tip:
If the new slot is full, the other entries in the column move down one slot, and
overflow from the left column moves to the top of the right column. If you drag an
entry to a page icon, the entry moves to the first available slot on that page. You
cannot drag an entry to a full page.
4. Hold Option
and press Return
to finish.
Page 84
Application-Specific Tasks
Using the Dial Pad view
to dial numbers that are not in your Speed Dial or Contacts list.
To dial a number with the Dial Pad:
1. Make sure wireless mode is on. See page 18 for details.
2. Press PhoneBook
to access the Dial Pad view
.
3. Enter the number you want to dial. If you are dialing an international number, enter a + before
the country code and phone number to automatically insert the prefix for international calls.
Tip:
You don’t need to press
before entering the number.
Backspace erases last digit
Dial box
CLR deletes entire entry
Digits enter
numbers in
dial box
Send dials number in dial box
Phone Tips displays helpful
PhoneBook hints
Tip:
To display the last ten numbers dialed, press the scroll buttons or roll the rocker
switch and then press the rocker switch to dial the selected number.
4. Press Space
to dial.
5. Close the lid to end the call.
Using the Contacts view
The Contacts view is where you store name and address information about people, businesses,
and more.
Creating a Contacts entry
You can create Contacts entries on your communicator, or you can use your desktop software to
next HotSync operation.
Many desktop software applications also have data import capabilities that enable you to load
database files into your Contacts list on your communicator. See the section that begins on page
34 and the online Help for your desktop software for more information.
Chapter 6
Page 85
To create a new Contacts entry:
1. Press PhoneBook
repeatedly to access the Contacts view
.
2. Press Menu
.
3. Under Record, select New Contact (/N).
Cursor at
Last name
4. Enter the last name of the person you want to add to your Contacts list.
5. Press the bottom scroll button to move to the First Name field and then enter the person's
first name.
6. Press the bottom scroll button to move to other fields and then enter the other information
that you want to include in this entry.
Tip:
Hold Shift
and use the scroll buttons to move between pages in this entry.
and press Return to finish.
7. After you finish entering information, hold Option
Tip:
To create an entry that always appears at the top of the Contacts list, begin the Last name
or Company field with a symbol, as in *If Found Call*. This entry can contain contact
information in case you lose your communicator.
Page 86
Application-Specific Tasks
Duplicating a Contacts entry
You can duplicate existing entries, which can be helpful when you want to enter multiple people
from a single organization. When you duplicate an entry, the word Copy appears next to the name
in the First Name field.
To duplicate an entry:
1. From the Contacts view, select the name you want to duplicate.
2. Press Menu
.
3. Under Record, and select Duplicate Contact (/T).
4. Edit the entry as necessary.
5. Hold Option
and press Return
to finish.
Calling a number in your Contacts list
1. Make sure wireless mode is on. See page 18 for details.
2. From the Contacts view, use the Instant Lookup feature to select the number you want to call.
See the section that begins on page 66 for details.
3. Press Space
Tip:
to dial.
You can also roll the rocker switch to scroll to the number you want to call, and then
press the rocker switch to dial the number.
Tap to select a
different category
Tap a number
to select it
Tap Dial to call
the number
4. Close the lid to end the call.
Chapter 6
Page 87
Selecting types of phone numbers
You can select the types of phone numbers or e-mail addresses that you associate with a
Contacts entry. Any changes you make apply only to the current entry.
To select other types of phone numbers in an entry:
1. Select the contact name for the entry that you want to change.
2. Press Space
3. Press Menu
to open the entry.
.
4. Under Record, select Edit Contact (/E).
5. Tap the pick list next to the label you want to change.
Tap
triangle
6. Select a new label.
7. Hold Option
and press Return
to finish.
Changing Contact entry details
The Contact Entry Details dialog box provides a variety of options that you can associate with an
entry.
To open the Contact Entry Details dialog box:
1. Select the name for the entry whose details you want to change.
2. Press Space
3. Press Menu
to open the entry.
.
4. Under Record, select Edit Contact (/E).
5. Press Menu
.
6. Under Record, select Details (/E).
Page 88
Application-Specific Tasks
7. Select any of the following settings:
Category
Private
Assign the entry to a category.
Hide this entry when Security is turned on.
8. Hold Option
and press Return
to finish.
Using the Call History view
The Call History view provides quick access to the previous 1,000 incoming and outgoing calls.
If you miss a call when your Treo is on and you remain in a coverage area, your missed calls
appear in the Call History list and you receive a missed call alert message. When your phone is
off or you travel outside a coverage area, your missed calls are forwarded to voicemail and they
do not appear in the Call History list. Similarly, when your phone is off or you travel outside a
coverage area, your wireless service provider stores your text messages until you turn on your
phone or return to a coverage area.
Reviewing Call History
Each item in the Call History view appears with an icon next to it indicating whether it is a Missed
call, an incoming call, or an outgoing call. You can display all your calls or one category at a time.
To review Call History:
1. Press PhoneBook
repeatedly to access the Call History view
.
Tap arrow to select
the call category: All,
Incoming, Outgoing,
or Missed
Missed call
Outgoing call
Incoming call
Tap Details to view
time and duration
2. Tap the pick list at the top of the screen to display a specific type of call: Missed, Incoming,
or Outgoing.
Tip:
To temporarily store a number in your communicator’s memory, press Menu
under Record, select Details (/E), tap Copy Phone #, and then hold Option
,
and
press Return
to finish. You can now Paste this number into any application on
your communicator.
Chapter 6
Page 89
Calling a number in your Call History list
History view to dial any number that appears on this view.
To dial a number from the Call History view:
1. Make sure wireless mode is on. See page 18 for details.
2. Use the scroll buttons to select the number you want to call.
Tap the entry you
want to dial
Tap Dial to call
selected number
3. Press Space
Tip:
to dial.
To add a number to your Contacts or Speed Dial list, press Menu
select Details (/E), tap Copy Phone #, go to the Contacts or Speed Dial view, and press
Menu , under Edit, select Paste (/P) to insert the number.
, under Record,
Purging Call History
Your Treo continues accumulating Call History information for up to 1,000 calls until you purge
the Call History list. To conserve storage space, we recommend that you purge this list
periodically.
Note: Using the Purge function permanently removes the calls from your communicator. You
cannot undo this process to restore the information.
To purge entries in Call History view:
1. From the Call History view, press Menu
.
2. Under Record, select Purge.
Tip:
To delete a specific item, select the item from the Call History view and select Delete
Item from the Record menu instead of Purge.
3. Select the purge option you want to use.
Tap the pick list to
choose which calls
to purge
4. Hold Option
and press Return
to finish.
Page 90
Application-Specific Tasks
Using the Active Call view
After you dial and establish a connection, or receive an incoming call, the Active Call view icon
appears in the lower left corner of the PhoneBook screen, and the Active Call view appears:
Tap Dial Pad to
enter extra numbers
such as a PIN code
or menu selection
Note: If you dialed a Speed Dial entry that includes Extra Digits, the Dial Pad button changes
to an Extra Digits button. Tap Extra Digits to dial the additional predefined numbers, such
as an extension.
Receiving Calls
Whenever your communicator’s wireless mode is on and you are within a coverage area, you can
receive incoming calls. An incoming call turns on your communicator’s screen if it is off and
displays the following alert:
Caller’s name and
phone number if
available
Tap Ignore to
Tap Answer to
send the call
to voicemail
accept the call
To answer a call while it is ringing, do any of the following:
■
■
■
Open the lid if it is closed.
Tap Answer if the lid is open.
Press the button on the headset (if it is attached).
To ignore a call and send it directly to voicemail, do any of the following:
■
Close the lid if it is open.
■
Press the top scroll button.
To silence the ring, do any of the following:
■
Press any button on your communicator.
■
Slide the ringer switch to the silent position
.
Note: Placing the ringer switch in the silent position turns off all system sounds, including
alarms. When you silence the ringer, Date Book Plus alarms vibrate.
Chapter 6
Page 91
To end a call, do any of the following:
■
Close the lid (if the headset is not attached).
■
■
■
Press Backspace
.
Press the button on the headset (if it is attached).
Tap Hang Up.
Adjusting call volume
You can adjust the volume level from the Active Call view when a call is in progress.
To adjust the call volume, do one of the following:
■
Roll the rocker switch up, or press the top scroll button, to increase the volume.
■
Roll the rocker switch down, or press the bottom scroll button, to decrease the volume.
Using the speakerphone
The speakerphone button enables you to view your communicator screen and use other
applications while you’re talking on the phone.
Note: The speakerphone feature is optimized for one or two people that are reasonably close
to the phone. It is not designed for a conference room or large group. This feature is not
available when a headset is attached to your phone.
To use the speakerphone:
1. Place a call.
2. From the Active Call screen, tap Spkrphone.
Tap Spkr-
phone
Tap Cancel
Spkr
3. Tap Cancel Spkr to turn off the speakerphone.
Tip:
You can also press Space
to toggle the speakerphone on and off.
Page 92
Application-Specific Tasks
Placing calls on hold
You can place an active call on hold while you use other applications on your communicator or
complete another task.
To place a call on hold:
1. Place or answer a call.
Call status
indicator
Tap Hold
Tap Off Hold
2. Tap Hold to place the call on hold.
3. Tap Off Hold to return to the call.
Handling Multiple Calls
You can use the Active Call view to handle a variety of situations that involve multiple calls. During
an active call, you can receive or place another call, switch between two active calls, and create
a 3-way conference call. For example, when you’re talking to a friend, you can place another call
to a restaurant to make dinner reservations, and return to your friend to confirm the time and
place. You can also use call waiting to receive an important incoming call while you’re already on
the phone, and to facilitate 3-way conference calls when you’re on the go.
To respond to call waiting, do one of the following:
■
■
■
■
Tap Hold & Answer to place the first call on hold and answer the second call.
Tap Drop & Answer to end the first call and answer the second call.
Tap Ignore to send the second call to voicemail.
Press the button on the headset (if it is attached) to place the first call on hold and to answer
the second call.
Caller’s name and
phone number if
available
Tap Drop & Answer
Tap Ignore to send
Tap Hold & Answer
call to voicemail
Note: Make sure the Disable Call Waiting option on the Call Preferences screen is off. When
this option is off the Disable Call Waiting check box is empty. See the section that begins
on page 97 for more information.
Chapter 6
Page 93
To dial another number while a call is in progress:
1. From the Active Call view, repeatedly press PhoneBook
use.
to access the view you want to
Tip:
You can also tap the Speed Dial, Dial Pad, Contacts, or Call History view icons.
2. Dial the number.
3. When the confirmation message appears, hold Option
and press Return
for Yes.
To switch between two active calls, do any of the following:
■
Tap the call status line of the call you want to make active.
■
Press the button on the headset (if it is attached).
1st call status
2nd call status
To use 3-way calling:
1. Answer or place two calls.
2. Tap 3-way Call to join the two calls.
Tap
3-way
Call
3. Tap Cancel 3-way to return to the previous active call and to place the other call on hold, or
tap Hang Up to end both calls.
Note: When a 3-way call is active and the headset is attached, pressing the button on the
headset places the second call on hold.
Page 94
Application-Specific Tasks
Forwarding calls
If you need to turn off the wireless mode or know you will be traveling outside a coverage area,
you can forward your calls to another number. Keep in mind that your wireless service provider
will still charge you for your forwarded calls.
Note: Because call forwarding information is stored by the network, it’s a good idea to check
the current network settings both before and after you change the call forwarding option.
To forward calls to another number:
1. From the Speed Dial, Dial Pad, or Call History view, press Menu
.
2. Under Options, select Call Preferences (/A).
3. Select the call forwarding option you want to use.
Tap here to forward
all calls to a
specific number
Tap here to
display current
network settings
Tip:
You can define multiple forwarding numbers. Select Edit numbers from the list to add,
change, or delete a number. You can also configure your communicator to forward calls
only in special situations, such as when you are busy or outside a coverage area. See
Appendix D for details.
4. Hold Option
and press Return
to finish.
Other ways to make a call
In addition to using the Speed Dial, Contacts, Dial Pad, and Call History views, you can also place
calls in the following ways:
■
■
■
Redialing the last number
Returning a missed call
Dialing an emergency number
Redialing the last number
You can redial the last number you called.
To redial the last number, do one of the following:
■
Press and hold PhoneBook
for at least one second.
■
Press and hold the rocker switch.
Chapter 6
Page 95
Returning a missed call
When your Treo is on and you remain in a coverage area, any calls you miss appear in the Call
outside a coverage area, your calls are forwarded to voicemail and they do not appear in the Call
History list.
■
If you miss multiple calls, a message appears indicating the number of calls you missed. See
page 90 for instructions on calling a number in your Call History list.
■
If you miss a single call, the following screen appears:
TapOKtodismiss
Tap Call Back to
the call without
dial the number
calling back
Note: If the caller’s phone number is not available, the Call Back button does not appear on the
Missed Call screen.
Calling an emergency number
in Europe.
To call an emergency number:
1. Make sure wireless mode is on. See page 18 for details.
2. Press PhoneBook
.
3. Do one of the following:
■ If your phone is unlocked, dial 911 or 112 from the Dial Pad screen.
■ If your phone is locked or your SIM card is missing, tap Make Emergency Call from the
Unlock SIM or SIM Card Not Found screen.
Tap Make Emergency Call
Tip:
You don’t need to unlock your phone or even have the SIM card installed to call an
emergency number.
Page 96
Application-Specific Tasks
PhoneBook menus
PhoneBook menus are shown here for your reference, and PhoneBook features that are not
explained elsewhere in this guide are described here.
See page 31 for information about choosing menu commands.
The Record and Options menus differ depending on which view is active.
Record menus
Contacts list view
Contacts edit view
Call History view
Contacts record view
Options menus
Dial Pad & Speed Dial views
Contacts view
Contacts record & edit views
Call History view
Opens a dialog where you can lock your SIM card to prevent unauthorized
use of your communicator’s wireless mode features.
Phone
Preferences
Chapter 6
Page 97
Preferences
■
■
Remember last category. Determines how the Contacts list appears
when you return to it from another application. If you select this check
box, the Contacts list shows the last category you selected. If you clear
it, the Contacts list displays the All category.
List By. Determines how the Contact entries are sorted in the
Contacts view, and also controls the PhoneBook Instant Lookup
feature and SMS address lookup options.
Call Preferences
■
Block outgoing caller ID. Determines whether PhoneBook reveals your
phone number to the person you’re calling. If your service provider
supports caller ID blocking, you can prevent revealing your phone
number to people you call.
■
Get Status. Displays the current call waiting, call blocking, and call
forwarding settings stored on your wireless service providers network.
Use this button to confirm that the network settings you selected are
active.
Dial Preferences
■
Dial, Email, SMS. Provides third-party applications access to
PhoneBook’s dialing functions. In most cases you do not need to
change these settings.
Page 98
Application-Specific Tasks
■
Default country. Determines if North American hyphenation
conventions are automatically applied to phone numbers, and whether
the following two options are available:
■ When dialing, add this area code to 7 digit numbers. Inserts the area
code you specify in front of 7-digit numbers before dialing.
■ Always dial 1 in front of the area code. Inserts a 1 in front of 10-digit
numbers before dialing.
If you select a country other than United States or Canada, numbers
are formatted exactly as they appear in the Contact record.
RenameCustom
Fields
These custom fields appear at the end of the Contact Edit screen. Rename
them to identify the kind of information you enter in them. The names you
give the custom fields appear in all Contacts records.
Select Network
■
■
Available networks. Enables you to manually select networks while
roaming if multiple service providers are available. When you manually
select a network, your Treo finds only that network until you either
choose another network, or return to Automatic Mode.
Automatic Mode. Allows your Treo to automatically select the provider
with the strongest signal. By default, Automatic Mode is on.
Chapter 6
Page 99
Phone Info
■
Number: Displays your SIM card’s phone number.
Note: Not all wireless service providers include the phone number on
the SIM. If the phone number is not on the SIM, this field
displays “No number on SIM” instead of the number.
■
■
IMEI: Displays your communicator’s equipment ID number which
uniquely identifies your communicator to your mobile service provider’s
network.
Firmware Rev: Displays the version number for the mobile
communication software on your communicator.
About
Shows version information for PhoneBook.
PhoneBook
Page 100
Application-Specific Tasks
Date Book Plus
When you open Date Book Plus, the screen shows the current date and a list of times for a normal
business day.
Working in Day View
Day View shows an hourly calendar for a particular date. If there are events scheduled on that
date, they appear in the appropriate time slot.
To view or select a date, do one of the following:
time.
Note: If you plan to do a lot of scrolling in Date Book Plus while the lid is closed, consider
enabling the Scroll before day move option in the Day Options dialog box. See page
116 for details.
■ Press Shift
and then a scroll button to scroll by weeks.
■ Tap the day of the week that you want in the date bar at the top of the screen. If necessary,
tap the Previous week or Next week scroll arrows to move to another week.
Previous week
Next week
Tap to select a day of
the current week
■ Press Menu
and under Options select Go to Day (/O). To scroll by days, press a scroll
button. To scroll by months, hold Shift
and press a scroll button. To scroll by years
hold Option and press a scroll button. After you scroll to the date, press Space
to select it. You can also type the number of the day or tap the screen to select a date from
the calendar.
Next year
Previous year
Tap to select a month
Tap to select a day
Tap to select current date
Scheduling an event
A record in Date Book Plus is called an “event.” An event can be any kind of activity that you
schedule an event, its description appears on the time line, and its duration is automatically set to
one hour. You can easily change the start time and duration for any event.
Note: It’s possible to schedule events that overlap, but Date Book Plus makes it easy to find
such conflicts. See page 111 for details.
Chapter 6
Page 101
You can also schedule events that occur on a particular date but have no specific start or end
times, such as birthdays, holidays, and anniversaries. These are referred to as “untimed events.”
Untimed events appear at the top of the list of times, marked with a diamond. You can have more
than one untimed event on a particular date.
You can also schedule a repeating event, such as a weekly meeting, and continuous events, such
as a three-day conference or a vacation.
To schedule an event:
1. Select the date on which you want to schedule the event as described in the previous section.
2. Type the time the event begins to open the Set Time dialog box. For example, type 4 for 4:00.
Start Time
Tap to scroll to earlier hours
Tap to change hours
Tap to change minutes
Tap to scroll to later hours
3. If the event is longer than an hour, press the bottom scroll button and type the end time.
4. Hold Option
and press Return
to finish.
5. Enter a description of the event. You can enter up to 255 characters.
Event description
Time bar shows
duration
indicating the duration of the event.
To schedule an untimed event:
1. Select the date on which you want to schedule the event. See page 101 for details.
2. Press Menu
.
3. Under Record, select New Appointment (/N).
Page 102
Application-Specific Tasks
4. Hold Option
event.
and press Return
so that no start or end times are defined for the new
Tip:
You can also create a new untimed event by making sure no event is selected and
then entering a description.
5. Enter a description of the event.
New
untimed
event
No time
selected
6. Tap a blank area on the screen to deselect the untimed event.
Note: If you create an event and decide later that there is no particular start or end time, you
can easily change it to an untimed event. Tap the time of the event in the Date Book Plus
screen, tap No Time, and then hold Option
and press Return
to finish.
Rescheduling an event
You can easily make changes to your schedule with your communicator.
To reschedule an event:
1. Tap the event you want to reschedule.
2. Tap Details.
3. To change the time, tap the Time box and select a new time.
4. To change the date, tap the Date box and select a new date.
5. Hold Option
and press Return
to finish.
Chapter 6
Page 103
Setting an alarm for an event
The Alarm setting enables you to set an audible alarm for events in Date Book Plus. You can set
an alarm to sound minutes, hours, or days before an event. The default Alarm setting is 5 minutes
before the time of the event, but you can change this to any number of minutes, hours, or days.
When you set an alarm, this icon
appears to the far right of the event with the alarm. When
the alarm tone sounds, a reminder message also appears onscreen.
Note: Make sure the ringer is on. Silencing the ringer turns off all system sounds, including
alarms. When you silence the ringer, Date Book Plus alarms vibrate.
To set an alarm for an event:
1. Tap the event to which you want to assign an alarm.
2. Tap Details.
3. Tap the Alarm check box to select it.
4. Tap the pick list to select Minutes, Hours, or Days.
5. Select the 5 and enter any number from 0 to 99 (inclusive) as the number of time units.
Enter number of
time units here
Tap here to
select unit of time
6. Hold Option
and press Return
to finish.
Alarm for untimed events: You can set a silent alarm for an untimed event. In this case, the alarm
triggers at the specified period of minutes, hours, or days before midnight (beginning) of the day
of the untimed event. No audible alarm sounds for an untimed event; instead, the reminder
message appears onscreen.
For example, you set an alarm for an untimed event that occurs on February 4th. If the alarm is
set for 5 minutes, the reminder message appears at 11:55 PM on the night of February 3rd. The
reminder remains onscreen until you turn on your communicator and hold Option
Return to dismiss it.
and press
To dismiss the alarm reminder, do one of the following:
■
Tap 5 min, 10 min, 30 min, or Other to reset the alarm to notify you in a specified period of
time.
■
Press the top scroll button.
Page 104
Application-Specific Tasks
Scheduling repeating or continuous events
The Repeat function lets you schedule events that recur at regular intervals or extend over a
period of consecutive days. A birthday is a good example of an event that repeats annually.
Another example is a weekly guitar lesson that falls on the same day of the week and the same
time of day.
Typically, a continuous event is an untimed event such as a business trip or a vacation that
continues for several days but doesn’t occur at a particular time of day.
To schedule a repeating or continuous event:
1. Tap the event.
2. Tap Details.
3. Tap the Repeat box to open the Change Repeat dialog box.
Repeat
box
4. Tap Day, Week, Month, or Year to set how often event repeats.
For a continuous event, tap Day.
5. Enter a number that corresponds to how often you want the event to repeat on the Every line.
For example, if you select Month and enter the number 2, the event repeats every other
month.
6. To specify an end date for the repeating or continuous event, tap the End on pick list and tap
Choose Date. Use the date picker to select an end date.
7. Hold Option
and press Return
to finish.
After you schedule a repeating or continuous event, this icon
event.
appears to the far right of the
Chapter 6
Page 105
Changing and deleting repeating or continuous events
If you change or delete a repeating or continuous event you can apply the action to only the
current event, to all instances of the event, or to the current event and instances that follow.
To change or delete repeating events:
1. Select the record you want to change or delete.
2. Tap Details.
3. Enter the change.
4. Hold Option
and press Return
to accept the change, or tap Delete.
5. Tap one of the following:
Current. Changes or deletes only the current instance of the repeating event.
All. Changes or deletes all past, current, and future occurrences of this event.
Following. Changes or deletes the current event and all future occurrences of this event.
Considerations for repeating or continuous events
Keep the following points in mind:
■
■
■
If you change the start date of a repeating event, your communicator calculates the number
of days you moved the event. Your communicator then automatically changes the end date
to maintain the duration of the repeating event.
If you change the repeat interval (e.g., daily to weekly) of a repeating event, past occurrences
(prior to the day on which you change the setting) are not changed, and your communicator
creates a new repeating event.
If you change the date of an occurrence of a repeating event (e.g., from January 14th to
January 15th) and apply the change to All occurrences, the new date becomes the start date
of the repeating event. Your communicator adjusts the end date to maintain the duration of
the event. If you apply the change to Current or Future occurrences, past occurrences (prior
to the day on which you change the setting) are not changed.
■
■
If you change other repeat settings (e.g., time, alarm, private) of a repeating event and apply
the change to Future occurrences, your communicator creates a new event. The start date of
this new event is the day on which the setting is changed. Past occurrences (prior to the day
of the change) are not changed.
If you apply a change to a single occurrence of a repeating event (e.g., time), that occurrence
no longer shows the Repeat icon
.
Page 106
Application-Specific Tasks
Changing the Date Book Plus view
In addition to displaying the calendar for a specific day, you can also display a whole week in
graph or text format, a month, a year, or a list of your appointments, as well as the current time.
To cycle through Day, Week, Week with Text, Month, Year, and List views:
■
Repeatedly press Date Book Plus
to display the next view.
To display the current time:
1. Tap and hold the stylus on the date in the date bar to display the current time.
Tap and hold the date
Current time displays
2. Drag the stylus below the date bar and then lift it.
Note: If you lift the stylus while it is still on the date bar, the menu bar appears.
Working in Week View
Week View shows the calendar of your events for an entire week. This view lets you quickly review
your appointments and available time slots. In addition, the graphical display helps you spot
overlaps and conflicts in your schedule.
Previous week
Next week
Event details
Tap for that day
Tap to show
event details
Bar indicates
earlier event
WeekView
icon
Dot indicates
untimed event
Bar indicates
later event
Tips for using Week View
Keep the following points in mind:
■
■
■
■
■
Tap an event to show details for the event.
Use the scroll buttons or rocker switch to move forward or backward a week at a time.
To reschedule an event, tap and drag the event to a different time or day.
Tap a blank time on any day to move to that day and have the time selected for a new event.
Tap any day or date that appears at the top of the Week View to move directly to that day
without selecting an event.
Chapter 6
Page 107
■
The Week View shows the time span defined by the Start Time and End Time in the Date
Book Plus Preferences settings. If you have an event before or after this time span, a bar
appears at the top or bottom of that day's column. Use the onscreen scroll arrows to scroll
to the event.
Working in Week View with Text
The Week View with Text shows an entire week with a description of each scheduled event. This
view can display one or two weeks at a time and can include To Do items that are due on the
dates shown.
Toggle between
1 and 2 weeks
Scroll to
more events
Dot indicates
more events
Week View with
Text icon
Box indicates To
Do item
Tips for using Week View with Text
Keep the following points in mind:
■
■
Tap a day to display that day in the Day View.
Use the scroll buttons or rocker switch to move between weeks. You can also tap the scroll
arrows in the upper-right corner to move forward or backward a week.
■
■
Press Menu
different week.
, and under Options, select Go to Week (/O). Tap a number to select a
Tap Go to open the date selector use the scroll buttons to select a week and then hold Option
and press Return to finish.
■
Tap the number of weeks to toggle between a one week view and a two week view.
Page 108
Application-Specific Tasks
Working in Month View
The Month View screen shows which days have events scheduled. Dots and lines in the Month
View indicate events, repeating events, and untimed events.
Previous/next month
Dashed line indicates continuous or repeating event
Dots on right or left side indicate events
Dots below date indicate untimed events
Month View
icon
You can control the dots and lines that appear in the Month View. See page 114 for details.
Tips for using Month View
Keep the following points in mind:
■
■
Tap a day in the Month View to display that day in the Day View.
Use the scroll buttons or rocker switch to move between months. You can also tap the scroll
arrows in the upper-right corner to move forward or backward a month.
■
Press Menu
, and under Options, select Go to Month (/O) to open the date selector and
select a different month.
Working in Year View
The Year View shows an overview of your calendar for an entire year.
Description of event
on selected date
Blinking dot indicates
selected date
Dot indicates
scheduled events
Scroll to other days
Year View button
Chapter 6
Page 109
Tips for using Year View
Keep the following points in mind:
■
Tap a day to display the date and events for that day in the title bar. A minus sign indicates
only one event is scheduled on that day. A plus sign indicates multiple events are scheduled
on that day.
■
Use the scroll buttons or rocker switch to move between days. You can also tap the scroll
arrows in the lower-right corner to move forward or backward a day.
■
■
Tap the scroll arrows in the upper-right corner to move forward or backward a year.
Press Menu
, and under Options select Year Preferences (/Y) to set display options.
Working in List View
The List View is a text oriented view that is integrated with To Do List. It displays a list of events
and To Do items for the selected week(s).
Scroll to
other weeks
Selected
week’s dates
List View button
Tips for using List View
Keep the following points in mind:
■
Tap a line to select it. The start and end time display briefly in the title bar. To redisplay the
event details, tap to the left of the description.
■
■
Tap the description of the selected line to display the event in Day View.
Use the scroll buttons or rocker switch to select specific items on the screen. You can also
tap the up scroll arrow in the upper-right corner to jump forward by one of the following: 1
Day, 1 Week, 1 Month, or Pick (a specific date). Then tap the scroll arrows to move forward
or backward a week.
■
■
Press Menu
select a different date.
, and under Options, select Go to Date (/O) to open the date selector and
Press Menu
options.
, and under Options, select List View Preferences (/L) to set display
Page 110
Application-Specific Tasks
Spotting event conflicts
With the ability to define specific start and end times for any event, it’s possible to schedule events
that overlap (an event that starts before a previous event finishes).
An event conflict (time overlap) appears in the Week View as overlapping bars. The Day View
displays overlapping brackets to the left of the conflicting times.
Event
conflict
Working with floating events
Date Book Plus can include events that are a combination of a To Do item and a Date Book event.
These events are called “floating events.” Floating events are not assigned to a specific date, but
can still be timed or untimed, can have alarms, and can repeat. If a floating event is not completed
by midnight, it automatically advances to the next day until you mark it complete.
You can distinguish a floating event from an integrated To Do item by the circle that appears next
to the floating event (in place of the To Do item priority number and check box). Floating events
appear in alphabetical order at the top of the Day View screen between any integrated To Do
items and untimed events.
To create a floating event:
1. From the Day View, press Menu
.
2. Under Record, select New Floating Event.
3. Enter a description of the event.
4. Tap a blank area on the screen to deselect the floating event.
To mark a floating event complete:
■
Tap the circle to the right or left of the event.
Tips for using floating events:
■
To prioritize floating events, enter a number followed by a space or dash as the first few
characters of the description.
■
To convert an existing event to a floating event, select the event, tap Details, tap Float as the
Type, and then hold Option
and press Return
to finish.
■
When you complete a repeating floating event, it marks only the current occurrence of the
event as complete.
Chapter 6
Page 111
■
■
Avoid scheduling a floating event that repeats daily. These events can accumulate quickly
unless you complete them each day.
When viewing a floating event in a desktop application, the Note field will contain a series of
characters: ##f@@@@@@ for an incomplete event and ##c@@@@@@ for a complete
event. Do not remove or edit these characters.
Working with To Do items
Date Book Plus can create and display To Do items. To Do items appear in priority order at the
top of the Day View screen.
To create To Do items in Date Book Plus:
1. From the Day View, press Menu
.
2. Under Record, select New To Do (/T).
3. Enter a description of the To Do item.
4. Tap a blank area on the screen to deselect the item.
To mark a To Do item complete:
■
Tap the check box next to the item.
Tips for using To Do items:
■
■
■
When you create a To Do item in Date Book Plus, the priority and category are based on the
settings in the Create Options dialog box. See the section that begins on page 118 for details.
If a To Do item does not appear in Date Book Plus, confirm that the category assigned to the
item is selected. See the section that begins on page 118 for details.
If you do not complete a To Do item on or before the due date, then an ! (exclamation mark)
appears next to the item as a reminder that it is overdue.
Using the Daily Journal
You can use the Daily Journal feature to record events as they occur. Events are recorded with
automatic time-stamping as Date Book Plus Notes so they do not clutter your schedule. The Daily
Journal is especially useful for tracking activities such as sales calls, start and end times for
consulting or other work, or keeping a record of how you spend your time at the office.
To create a Daily Journal entry:
1. From the Day View, press Menu
.
2. Under Record, select New Journal Entry (/J).
Date Book Plus creates an untimed event, opens a Note for this event, and inserts the current
time. If you’ve already started a journal for the current day, Date Book Plus opens the existing
journal and inserts a new entry.
3. Enter a description for the journal entry.
4. Hold Option
and press Return
to finish.
Page 112
Application-Specific Tasks
Using templates
You can use templates to create a list of standard events. You can then select an event from this
list and add it to your calendar. Since Date Book Plus saves all the event attributes, including
alarms and notes, templates can really save you time when entering reminder notices or events
that recur on different days and times.
To create a template:
1. Select the event you want to save as a template.
2. Press Menu
3. Under Record, select tap Create Template (/V).
4. Hold Option and press Return to finish.
To schedule a template event:
.
1. Select the date on which you want to schedule the event.
2. From the Day View, tap the time line that corresponds to the beginning of the event.
3. Tap New and select Template from the list.
Tap to create an event
from a template
4. Select the event from the Appointment Templates list.
5. Hold Option
and press Return
to finish.
Chapter 6
Page 113
Date Book Plus menus are shown here for your reference, and Date Book Plus features that are
not explained elsewhere in this guide are described here.
See page 31 for information about choosing menu commands.
Record menu
List View
Day View
New To Do
Creates a new To Do item and adds it to your Date Book Plus and To Do
List database.
Duplicate Item
Creates a copy of the selected event and opens the Details dialog box for
the new event.
Options menu
Week View
Week View with Text
Day View
Year View
List View
Month View
Page 114
Application-Specific Tasks
Preferences
(Day View)
■
Start/End Time. Defines the start and end times for Date Book Plus
screens. If the time slots you select do not fit on one screen, you can
tap the scroll arrows to scroll up and down.
■
■
Event Duration. Defines the default duration for new events.
Week Start. Defines the first day of the week. This setting overrides the
System Preferences setting for all Date Book Plus views.
■
■
■
Initial View. Defines the view that appears when you start Date Book
Plus.
Button Views. Defines which views display when you repeatedly press
the Date Book Plus button. By default, all views appear.
Display Options. Opens the Display Options dialog box where you can
define the following options:
Chapter 6
Page 115
Display Options
■
■
Show Time Bars. Activates the time bars that appear in the Day View.
The time bars show the duration of an event and illustrate event
conflicts
Compress Day View. Controls how times appear in the Day View. When
Compress Day View is off, all time slots display. When it is on, start and
end times display for each event, but blank time slots toward the
bottom of the screen disappear to minimize scrolling.
■
■
Show PM Label. Displays a “p” after PM times.
Show End Times. Displays all time bars and time slots for end times of
an event.
■
Scroll Before Day Move. Determines whether the front panel scroll
buttons will scroll up and down within the current day before scrolling
to the previous or next day.
■
■
■
Auto-scroll Time. Displays events based on the time of day when the
Day View contains more than one screen of information.
Float Advance at Midnight. Advances floating events to the next day at
midnight of the current day.
Show Completed Floating Events. Displays completed floating events.
Page 116
Application-Specific Tasks
Alarm
Preferences
■
■
■
Alarm Sound. Sets the tone of the alarm.
Snooze Sound. Sets the tone of the snooze alarm.
Remind Sound. Sets the tone of the reminder alarm. The reminder
alarm sounds when the snooze alarm is not acknowledged.
■
■
Play Sound. Defines how many tones the alarm emits before it stops.
The choices are Once, Twice, 3 Times, 5 Times, and 10 Times.
Repeat Alarm. Defines how many times the alarm repeats when it is not
acknowledged. The choices are Once, Twice, 3 Times, 5 Times, 10
Times, and 100 Times.
■
■
Every. Defines how often the alarm sound repeats. The choices are
Minute, 5 minutes, 10 minutes, and 30 minutes.
Alarm Preset. Automatically sets an alarm for each new event. The
silent alarm for untimed events is defined by minutes, days, or hours
before midnight of the date of the event.
Chapter 6
Page 117
To Do
Preferences
■
■
Show Categories. Displays the To Do items in the categories you
select.
Priorities Displayed. Displays To Do items with the selected priority
level. The choices are 1 only, 1-2, 1-3, 1-4, and 1-5.
■
■
■
Show Priority. Displays the priority level for To Do items.
Show Completed Items. Displays completed To Do items.
Show Undated Items. Shows all To Do items that have not been
assigned a due date.
■
■
■
Show Dated Items. Shows all To Do items that have been assigned a
due date.
Days before Due Date. Defines the number of days before the due date
that an item will appear in Day View as a To Do item.
Create Options. Opens the Create Options dialog box where you can
select the default priority and category for To Do Items you create in
Date Book Plus.
UnDelete from
Archive
Restores the last event you deleted from Date Book Plus (provided it was
stored in the Archive file). You can select this command repeatedly to
restore additional events.
Go to Week
Enables you to jump to a specific week by tapping the week number in the
current year.
Page 118
Application-Specific Tasks
Week
Preferences
■
■
Time Format. Defines the format of the time display. The choices are
No Time, 11p, 11:30p, 23, 23:30.
Display To Do. Defines where To Do items will appear on the Date
Book Plus screen. The choices are Top, Bottom, and Hide.
■
■
Week Start. Defines the first day of the week for Week View with Text.
Wordwrap Single Entry. Wraps text in cells that contain a single event
to display as much text as will fit in the cell.
■
Hide Untimed Floating Events. Removes untimed floating events from
the Week View with Text display.
■
■
Show Journal. Displays a Daily Journal entry.
Include Week Numbers in Title. Displays the selected week number in
the title bar.
Month
Preferences
■
■
Show Timed Events. Displays events that you assigned to a specific
time.
Show Untimed Events. Displays events that you assigned to a date, but
did not assign to a specific time.
■
■
Show Daily Repeating Events. Displays events that repeat each day.
Include Week Numbers in Title. Displays week numbers in the title bar
for the first and last weeks in the month.
■
Show Zero Duration Events. Displays events that have no duration in
the Month View display.
Chapter 6
Page 119
Year
Preferences
■
■
■
■
Hide Floating and Done Items. Removes floating events and completed
To Do items from the Year View display.
Hide Untimed Events. Removes untimed events from the Year View
display.
Hide Zero Duration Events. Removes events without a duration from
the Year View display.
Hide Events <. Removes events that are shorter than the time you
specify from the Year View display. The choices are 0.5, 1, 2, 4, 8, and
12.
■
Hide Daily Repeating Events. Removes events that repeat daily from
the Year View display.
List View
Preferences
■
■
Date Book. Determines which type of events appear in the List View
display. The choices are: Appt, Float, Done, Alarms Only, and Repeat
events only appear once.
To Do. Determines which type of To Do items appear in the List View
display. The choices are All, Not Complete, Complete, and None. If you
choose either Not Complete or Complete, you also have the following
choices: Dated & Undated, Dated only, and Undated only.
■
■
Filter by Text. Displays events that contain the text you enter in this field
and hides events that do not contain this text.
Show. Determines the type of information that will appear for each
event. The choices are Day Name and Time.
About Date
Book+
Shows version information for Date Book Plus.
Page 120
Application-Specific Tasks
Blazer
If you can’t hold the world in the palm of your hand, at least you can hold the World Wide Web
when you use Blazer to browse the Internet on your communicator’s screen.
To use Blazer, you must subscribe to data services from your wireless service provider, and you
must have an account established with an ISP (Internet Service Provider). Many wireless service
providers also provide ISP services. If ISP information is available from your wireless service
provider when you configure your wireless communication settings with the Handspring CD-
ROM, the installation program will set up Blazer for use with that provider.
Note: If you already installed the desktop software from the Handspring CD-ROM but didn’t
configure the wireless communication settings, double-click the Configure Your Treo
icon in the Palm folder and follow the instructions on the screen
Viewing web pages
You can view web pages whenever you are inside a coverage area. If you are outside a coverage
area, you can view web pages that are stored temporarily on your communicator in an area called
the “cache.” However, if a page stored in the cache has an expiration date and it is past that date,
you need to establish an Internet connection to view that page.
Tip:
indicator in the lower right corner of the screen.
To view a web page:
1. Make sure wireless mode is on. See page 18 for details.
2. Press Blazer
.
Note: If a different application appears when you press Blazer
provider installed another application as the default web browser. To launch Blazer,
press Option , press Menu , and then tap the Blazer icon
, your wireless service
.
3. Press Menu
.
4. Under Go, select Go to Web Page (/G).
Tip:
You can also tap the Folder icon
to open the Go to Web Page dialog box.
Folder icon
Chapter 6
Page 121
5. Enter the URL you want to view.
6. Hold Option and press Return
to finish.
While a page is loading, a Progress icon
appears in the lower right corner of the screen.
You can tap links to other pages as soon as they appear. You don’t need to wait until a page
fully loads. To stop loading a page, tap the Stop icon
in the lower left corner of the screen.
Tap to go to
home page
7. Navigate within a web site, by doing any of the following:
■ To scroll through a page, use the scroll buttons or tap the onscreen arrows or scroll bar (if
one appears).
■ To move between elements on a page, such as fields, icons, or buttons, roll the rocker
switch or hold Shift
and use the scroll buttons.
■ To select an element on a page, move to the element and press the rocker switch or tap
the element on the screen.
■ To move to between pages when no elements are highlighted, press Return
the next page or Backspace to move to the previous page.
to move to
Tip:
To view a list of web sites that are optimized for your communicator, go to the home
page, and then tap Directory of Mobile Sites.
Page 122
Application-Specific Tasks
Working with bookmarks
The Bookmark view makes it easy for you to get to web sites you visit often.
Viewing bookmarked pages
any of the predefined bookmarks, or to any pages for which you’ve created a bookmark.
To view a bookmark:
1. Make sure wireless mode is on. See page 18 for details.
2. Press Blazer
twice to access the Bookmark view
.
3. Tap the bookmark you want to view.
Tap to view
more pages
Tip:
You can also press the scroll buttons to scroll to other pages, and roll the rocker
switch to scroll through the current page. To view the selected page, press the rocker
switch.
Adding bookmarks
You can store up to 100 bookmarks and group them in categories by placing similar links on the
same bookmark page. See page 125 for information on creating page categories.
To bookmark the current page:
1. From the Page view, go to the page you want to bookmark.
2. Press Menu
.
3. Under Page, select Add Bookmark (/A).
4. Hold Option
and press Return
to finish.
Chapter 6
Page 123
Tip:
You can also add a bookmark by tapping an empty bookmark slot in the Bookmark view
and entering a Name, Description, and URL for the page you want to bookmark.
To define a bookmark:
1. From the Bookmark view, press Menu
.
2. Under Bookmark, select Add Bookmark (/A).
Tip: You can also open the New Bookmark dialog box by tapping an empty bookmark slot.
3. Enter a Name, Description, and URL for the page you want to bookmark.
Tap an
empty
slot
4. Hold Option
and press Return
to finish.
Editing bookmarks
You can change the title, description, or URL associated with any of your bookmarks.
To edit a bookmark:
1. From the Bookmark view, press Menu
.
2. Under Bookmark, select Edit Bookmark (/E).
Tap a bookmark
Page icons
3. Tap the page icons to navigate to the page containing the bookmark you want to change.
Tip:
You can enter or change the Title for any bookmark page. Use the page Title to
create bookmark categories. For example, if you want to create a page with links to
various investments, you might name the page Assets.
4. Tap the bookmark you want to change.
5. Enter the changes.
6. Hold Option
and press Return
to finish.
Page 124
Application-Specific Tasks
Deleting bookmarks
If your bookmark list becomes full, or you no longer need an entry, you can delete it.
To delete a bookmark:
1. From the Bookmark view, press Menu
.
2. Under Bookmark, select Edit Bookmark (/E).
3. Tap the entry you want to delete.
4. In the Edit Bookmark dialog, tap Delete.
5. Hold Option
and press Return
twice to confirm deletion.
Arranging your bookmarks
As your bookmark list grows, you may want to rearrange the entries or move entire pages. You
can assign a title to each bookmark page and arrange the entries by category. For example, if you
want to create a page with links to various sports scores, you might name the page Scores.
To assign page category titles:
1. From the Bookmark view, press Menu
.
2. Under Bookmark, select Edit Bookmark (/E).
3. Tap the page icon to which you want to assign a title.
4. Enter the title.
5. Hold Option
and press Return
to finish.
To rearrange bookmark entries:
1. From the Bookmark view, press Menu
.
2. Under Bookmark, select Edit Bookmark (/E).
3. Drag the entries to the slot where you want them to appear.
Drag an entry to
another slot or
page
Tip:
If the new slot is full, the other entries move down one slot as the rows fill from top
to bottom. If you drag an entry to a page icon, the entry moves to the first available
slot on that page.
4. Hold Option
and press Return
to finish.
Chapter 6
Page 125
To rearrange bookmark pages:
1. From the Bookmark view, press Menu
.
2. Under Bookmark, select Edit Bookmark (/E).
3. Drag the page to the slot where you want it to appear.
A grey line appears next to the page when it is in drag mode. When dropping a page on the
top row, the grey line appears to the left of the slot where the page will appear. When drop-
ping a page on the bottom row, the grey line appears to the right of the slot where the page
will appear.
Drag a page to
another slot
4. Hold Option
and press Return
to finish.
Blazer menus
Blazer menus are shown here for your reference, and Blazer features that are not explained
elsewhere in this guide are described here.
See page 31 for information about choosing menu commands.
The Go and Options menus differ depending on whether you’re displaying the Page view or the
Bookmark view.
Page menu
Page view
Refresh
Enables you to update the current web page with the most up-to-date
information.
Stop loading Cancels the process of loading a page.
Page 126
Application-Specific Tasks
Preferences
Browser tab:
Home page. Displays the URL of the current home page selection. Tap this
■
option to open the Set Home Page dialog box and select a different home
page. To restore the factory default Home Page setting, tap Restore in the
Set Home Page dialog box.
Note: Some service providers may not support the default Home Page
setting.
■
Initial view. Determines whether the Page view or Bookmark view appears
when you start the Blazer application. The default option is Page view.
■
Images. Determines depth of color used to display graphic images. You
can also choose to not display images at all. The options are: No Images
(fastest), Black & White (faster), 4 Shades of Gray (fast), 16 Shades of
Gray (slow), 256 Colors (slower), High Color (slowest). The default setting
is 256 Colors (slower).
■
■
Ask before establishing Internet connection. Displays a confirmation
dialog each time you begin an Internet session. The default setting for this
option is on.
Disconnect On Exit. Determines whether the Internet connection
automatically closes when you exit the Blazer application. Leaving this
option off enables you to switch to another application and then return to
Blazer while you are still connected to the Internet. The default setting for
this option is off.
Page 128
Application-Specific Tasks
Preferences
(continued)
Advanced tab:
■
Cache Size (K). Displays the amount of memory that Blazer reserves to
store recently viewed pages. The amount of free memory available on your
communicator appears below this option.
■
■
■
■
Clear. Erases all the pages stored in the cache. You cannot cancel or undo
this action.
Accept Cookies. Enables the receipt of Internet cookies. The default setting
for this option is on.
Clear Cookies. Erases all the cookies stored on your communicator. You
cannot cancel or undo this action.
Set Proxy. Opens the Set Proxy dialog box where you can enter advanced
HTTP proxy server settings. If your ISP or network requires you to go
through a proxy server when you connect to the Internet, use this dialog box
to enter the proxy server settings. Contact your ISP or system administrator
for details.
Disconnect
Terminates your connection to the Internet.
About Blazer Displays version information for Blazer.
Chapter 6
Page 129
SMS Messaging
In addition to dialing and receiving voice calls, you can use your Treo to send and receive short
text messages. These text messages, also called SMS (Short Message Service) messages, are
similar to e-mail messages that you send and receive from your computer, but are limited to 160
characters in length. The person receiving your message must also have a GSM mobile phone
and a wireless service provider that supports text messages. Some wireless service providers also
allow you to use your Treo to send text messages to an e-mail address and to receive text
messages from a computer. Talk to your wireless service provider for details about their SMS and
SMS Email features.
Enabling SMS and SMS Email
To send and reply to SMS messages, you must subscribe to your wireless service provider’s SMS
service. If you subscribe to this service, your wireless service provider supplies an SMS Message
Center number which appears in the SMS Preferences dialog.
Note: Your wireless service provider may use a different name for their text messaging service.
Contact your wireless service provider to see if their service is compatible with SMS.
To use SMS Email, you must subscribe to your wireless service provider’s SMS Email service and
enter their SMS Email Center number in the SMS Preferences dialog. The SMS Email Center
forwards the SMS messages to the recipient’s e-mail address. Contact your wireless service
provider to obtain their SMS Email Center number.
To enable SMS and SMS Email:
1. Make sure wireless mode is on for at least 30 seconds. See page 18 for details.
2. Press SMS Messaging
.
3. From the SMS Messages Inbox, press Menu
4. Under Options, select Preferences.
.
5. Enter or confirm the SMS Message Center number.
6. Enter or confirm the SMS Email Center number.
SMS message center number
SMS email center number
7. Hold Option
and press Return
to finish.
Page 130
Application-Specific Tasks
Receiving SMS messages
When you receive SMS messages, the New SMS Messages alert appears.
Note: You can receive SMS messages even if you don’t subscribe to your wireless service
provider’s SMS service.
Number of new messages
Most recent message
In the New SMS Messages alert dialog box, you can save or respond to the first message by
tapping any of the following buttons:
OK
Saves the message in the SMS Messages Inbox category, dismisses the
alert dialog box, and returns you to the previous application.
Reply
Switches to the SMS Messaging application, opens the new message
dialog box, and addresses the message to the person who sent you the
message.
Call Sender
Dials the number of the person who sent you the message. If the message
was sent from an e-mail address, this option is not available.
Delete Msg. Deletes the current message, dismisses the alert dialog box, and returns
you to the previous application.
Tips:
■
To view additional incoming messages, press SMS Messaging
.
■
You can also dismiss the alert dialog box by pressing the rocker switch or the top scroll
button.
Viewing messages
SMS Messaging enables you to quickly view your incoming messages. You can also view
messages you’ve sent and pending messages that will be sent when a signal is available.
To view SMS messages:
1. Press SMS Messaging
Inbox, Sent, or Pending.
repeatedly to access the message category you want to view:
Note: The Pending category appears only when you have messages pending delivery.
Chapter 6
Page 131
Message category
pick list
Current
message
Message
header
Message
text
2. Hold Shift
and use the scroll buttons to page through the messages.
Tips:
■
■
■
If a message is too long to fit on one screen, press the scroll buttons to view additional
screens in the current message.
If a message is longer than 160 characters, it is divided into sub-messages which appear as
separate items.
To view one message at a time, use the scroll buttons or rocker switch to select the header
of the message you want to view and then press Space
or the rocker switch. Page
through messages one at a time with the scroll buttons or rocker switch.
Replying to messages
You can send an SMS message as a response, or you can call the person who sent you the
message.
To send an SMS message reply:
1. From the SMS Messages Inbox, select the message to which you want to reply.
Selected message
Tap Reply to respond
to the message
2. Press Menu
.
3. Under Message, select Reply (/R).
4. Enter the message text.
When you reply to an SMS message, SMS Messaging fills in the To field for you. When you
reply to an SMS Email message, you must enter the e-mail address manually. See the next
section in this chapter for more information.
Page 132
Application-Specific Tasks
5. Make sure wireless mode is on. See page 18 for details.
6. Hold Option
and press Return
to send the message.
To call the sender:
1. From the SMS Messages Inbox, select the message from the person you want to call.
2. Press Menu
.
3. Under Message, select Call Sender (/A).
Creating SMS messages
SMS Messaging enables you to create short text messages and to send them to a mobile phone
number or an e-mail address. If a message exceeds 160 characters, SMS Messaging
automatically divides the text into multiple messages when it sends the message. As you create
a message, the status bar at the top of the screen indicates how many messages will be sent and
the number of characters in each message.
To save time while creating messages, you can insert predefined text from a boilerplate. Some
boilerplates ask you to enter information such as a meeting time or place. Using a boilerplate is
similar to filling in the blanks on a form letter instead of writing a letter from scratch. You can easily
combine the boilerplate text with your own text to personalize your message.
You can create a message at any time, but if you send a message when you are outside a
coverage area, your Treo places the message in the Pending category and sends it automatically
when you return to a coverage area. While a message is in the Pending category, you can edit or
delete it before it is sent.
To create an SMS text message:
.
2. Under Message, select New (/N).
Note: If you defined a signature, it automatically appears at the end of your message. See
page 135 for details on defining a signature.
3. Use the scroll buttons to select one of the following address methods, and then press
Space
:
Tap To
Chapter 6
Page 133
Address by
Mobile Number
Enter a mobile phone number to send an SMS message to another
GSM mobile phone.
Address by Email Enter an e-mail address to send an SMS message to an e-mail
Address
address. To send a message to an e-mail address, you must subscribe
to your wireless service provider’s SMS Email service and enter their
SMS Email Center number in the SMS Preferences dialog. See page
130 for details.
Address by Last
Name Lookup
Look up a name from your Contacts list in the PhoneBook application
by entering the first few letters of the last name and then pressing
Return
. If multiple entries appear, scroll to the GSM mobile phone
to select it.
number or e-mail address you want and press Return
Addresses
Tap a recently used mobile phone number or e-mail address on the list.
Tip:
If you’re sending a message to an e-mail address and your wireless service provider
supports message titles, you can add a title by entering <subject>#<message>.
Simply replace the word subject with the title, and the word message with the
message body.
4. Enter the appropriate information for the address option you selected in step 3, and then
press the bottom scroll button to move to the text field.
5. Enter the message text.
Tip:
You can also tap Boilerplate to select a predefined text phrase. If prompted, enter or
select other text to complete the phrase.
Tap
Boilerplate
6. Hold Option
7. Make sure wireless mode is on. See page 18 for details.
8. Hold Option and press Return to send the message.
and press Return
to finish.
The message goes into the Pending category until your phone transmits the message. After your
message transmits, your Treo places a copy in the Sent category. If an error occurs while sending
the message, an ! appears next to the message header. Select the message to view information
about why the message did not go through.
Page 134
Application-Specific Tasks
Creating a message signature
You can create a signature of up to 80 characters. Then, when you create a message, SMS
Messaging automatically inserts your signature at the end of each message you create. If
necessary, you can edit the default signature text when you create a message.
Note: The signature text you define applies only to new messages. If you are editing a message
or have messages in the Pending folder when you create the signature text, the signature
text will not be added to those messages. If you enable or disable the signature option,
the signature will not be added or removed from those messages either.
To create a message signature:
1. From any SMS Messaging list view, press Menu
.
2. Under Options, select Signature.
Tap here to add the
signature to your
messages
Enter the default
signature text
3. Enter the signature text.
4. Hold Option
and press Return
to finish.
Creating boilerplates
When you create a message you can use the Boilerplate pick list to insert predefined text in your
message. You can also add items to the list and modify any of the items you add.
1. From any SMS Messaging list view, press Menu
2. Under Options, select Boilerplate Text.
.
Tap an entry
to edit it
Tap New to
createanew
boilerplate
3. Tap New, or tap an entry you created that you want to edit.
4. Enter or modify the text in the Boilerplate dialog box.
Tip:
To delete a boilerplate, tap Delete.
5. Hold Option
and press Return
twice to finish.
Chapter 6
Page 135
Copying and forwarding messages
You can save time by copying text from your SMS messages, or forwarding messages.
To copy text from an SMS message:
1. From any SMS Messaging list view, tap the text of the message you want to copy.
2. Press Menu
.
3. Under Edit, select Select All (/S).
Tip:
To copy only a portion of the message, highlight the text you want to copy and select
Copy (/C) instead of Select All.
4. Open the message or application where you want to insert the message.
5. Press Menu
.
6. Under Edit, select Paste (/P).
To forward messages:
1. From the SMS Inbox or Sent category, tap the header of the message you want to forward.
2. Press Menu
.
3. Under Message, select Forward (/F).
Tip:
You can edit the forwarded message before sending it.
4. Address the message as described on page 133.
5. Make sure wireless mode is on. See page 18 for details.
6. Hold Option
and press Return
to send the message.
Modifying messages
You can modify any messages in the Pending category.
To modify Pending messages:
1. In the Pending category, select the message you want to change.
2. Press Menu
.
3. Under Message, select Edit (/E).
Tip:
You can also tap the body of the message to open it in Edit mode.
4. Edit the message.
5. Make sure wireless mode is on. See page 18 for details.
6. Hold Option
and press Return
to send the message.
Page 136
Application-Specific Tasks
Resending messages
You can resend any messages in the Sent category.
1. In the Sent category, select the message you want to resend.
2. Press Menu
.
3. Under Message, select Resend (/R).
4. If necessary, edit the message.
5. Make sure wireless mode is on. See page 18 for details.
6. Hold Option
and press Return
to send the message.
Sorting messages
1. From any SMS Messaging list view, press Menu
.
2. Under Options, select Sort.
3. Tap the Sort by pick list to select the sort method you want to use.
Tap arrow to select
sort method
Date
Places the most recent messages at the top of the list. This is the default
sort method.
Name
Places mobile phone numbers at the top of the list in numerical order,
followed by e-mail addresses and names in alphabetical order.
4. Hold Option
and press Return
to finish.
Chapter 6
Page 137
Deleting messages
You can delete a single message or a group of messages from a particular category.
To delete a single message:
1. From any SMS Messaging list view, select the message you want to delete.
2. Press Menu
3. Under Message, select Delete (/D).
4. If prompted, hold Option and press Return
Tip: You can also delete a message by selecting it and pressing Backspace
To delete a group of messages:
.
to confirm deletion.
.
1. From any SMS Messaging list view, select the category containing the messages you want
to delete.
2. Press Menu
.
3. Under Message, select Purge Messages.
4. Select the deletion method you want to use.
Tap arrow to select
deletion method
Older than 1 Deletes all messages in the current category with a date earlier than 1
week
week prior to the current date.
Older than 1 Deletes all messages in the current category with a date earlier than 1
month
month prior to the current date.
Except last
10
Keeps only the 10 most recent messages and deletes all other messages
in the current category.
All
Deletes all messages in the current category.
5. Hold Option
and press Return
twice to confirm deletion.
SMS Messaging menus are shown here for your reference, and SMS Messaging features that
are not explained elsewhere in this guide are described here.
See page 31 for information about choosing menu commands.
The Message and Options menus differ depending on which SMS Messaging view is on the
screen.
Page 138
Application-Specific Tasks
Message menus
Pending view
Message view
Inbox view
Sent view
Open
Displays the selected message in single message view.
Options menus
Message views
List views
Preferences
■
■
SMS Message Center number. Enables you to enter the number for
your wireless service provider’s SMS message center. This number is
stored on your SIM card.
SMS Email Center number. Enables you to enter the telephone
number for your wireless service provider’s e-mail gateway. This
number is stored on your communicator. If you move your SIM card to
another phone, you need to enter this number to send SMS messages
to an e-mail address.
■
■
Confirm deletions. Determines whether a confirmation dialog box
appears when you delete messages or boilerplates.
Save copies of sent messages in Sent folder. Determines whether
messages you send are stored in the Sent folder. If you turn this
option off, your outbound messages are not stored in the Sent folder.
About SMS
Shows version information for SMS Messaging.
Chapter 6
Page 139
To Do List
To Do reminds you of tasks you have to complete. A record in To Do List is called an “item.”
To create a To Do item:
1. Press Option
and then press Date Book Plus
.
Tip:
You can also access To Do List by tapping the To Do List icon
Launcher.
in the Applications
2. Enter the text of the To Do item. The text can be longer than one line.
New To
Do item
3. Press a scroll button to deselect the To Do item.
Setting priority
The priority setting for items lets you arrange your To Do items according to their importance or
urgency. The default setting is to arrange To Do items by priority and due date, with priority 1
items at the top. If you have a number of items in your list, changing an item’s priority setting may
move its position in the list.
Note: When you create a new To Do item, its priority is automatically set to level 1, the highest
(most important) level. If you select another item first, however, the item you create
appears beneath the selected item and is given the same priority as the selected item.
To set the priority of a To Do item:
1. Tap the Priority number on the left side of the To Do item.
Taptoselect
priority
Tap here
2. Tap the Priority number that you want to set (1 is most important).
Page 140
Application-Specific Tasks
Setting a due date
You can associate a due date with any To Do item. You can also sort the items that appear in the
list based on their due date.
To set a due date for a To Do item:
1. Tap the text of the item whose details you want to change.
2. Tap Details.
3. Tap the Due Date pick list.
Tap here
4. Tap the date that you want to assign the item:
Today
Assigns the current date.
Tomorrow
One week later
No Date
Assigns tomorrow’s date.
Assigns the date exactly one week from the current date.
Removes the due date from the item.
Choose date
Opens the date selector, where you can choose any date that you
want for the item.
5. Hold Option
Tip:
and press Return
to finish.
If you turn on the Show Due Dates option in the To Do Show options dialog, you can tap
directly on the due date in the To Do list to open the pick list shown in step 4.
Assigning a category
You can associate any To Do item with a category. You can also sort the items that appear in the
list based on their category.
To assign a category for a To Do item:
1. Tap the text of the item whose details you want to change.
2. Tap Details.
3. Tap the category pick list.
Chapter 6
Page 141
Tap here
4. Tap the category that you want to assign the item.
5. Hold Option
Tip:
and press Return
to finish.
If you turn on the Show Categories option in the To Do Show options dialog, you can tap
directly on the category in the To Do list to assign categories.
Checking off a To Do item
You can check off a To Do item to indicate that you’ve completed it. You can set To Do List to
record the date that you completed the To Do item, and you can choose to show or hide
completed items as described on page 142.
To check off a To Do item:
■
Tap the check box on the left side of the item.
Completed
To Do item
To Do Show Options
The Show Options dialog box enables you to control the appearance of the To Do list screen.
To change the Show Options settings:
1. In To Do list screen, tap Show.
Page 142
Application-Specific Tasks
2. Select any of the following settings:
Show
Completed
Items
Displays your completed items in the To Do list screen. If you turn off
this setting, your To Do items disappear from the list when you
complete (check) them.
Items that no longer appear on the list because you turn off this setting
have not been deleted. They are still in the memory of your
communicator. Purge completed items to remove them from memory.
Show Only Due Shows only the items that are currently due, past due, or have no due
Items
date specified. When this setting is active, items that are not yet due
do not appear in the list until their due date.
Record
Replaces the due date with the actual date when you complete
Completion Date (check) the item. If you do not assign a due date to an item, the
completion date still records when you complete the item.
Show Due Dates Displays the due dates associated with To Do items and displays an
exclamation mark next to items that remain incomplete after the due
date passes.
Show Priorities
Shows the priority setting for each item.
Shows the category for each item.
Show
Categories
3. Hold Option
and press Return
to finish.
To Do List menus
To Do List menus are shown here for your reference, and To Do List features that are not
explained elsewhere in this guide are described here. See page 31 for information about
choosing menu commands.
Record menu
Options menu
About To Do List Shows version information for To Do List.
Chapter 6
Page 143
Memo Pad
A memo can contain up to 4,000 characters. The number of memos you can store is dependent
only on the memory available on your communicator. A record in Memo Pad is called a “memo.”
To create a new memo:
1. Press Option
and then press PhoneBook
.
Tip;
You can also access Memo Pad by tapping the Memo Pad icon
Applications Launcher.
in the
2. Enter the text you want to appear in the memo. Press Return
in the memo.
to move down to new lines
Tip:
The first letter of your memo is automatically capitalized.
Tap New
3. Hold Option
and press Return
to finish.
Reviewing memos
The first line of a memo appears in the Memo list. This makes it easy to locate and review your
memos.
To review a memo:
1. In the Memo list, tap the text of the memo.
Tap a memo
to review its
contents
2. Review or edit the text in the memo.
3. Hold Option
and press Return
to finish.
Page 144
Application-Specific Tasks
Memo Pad menus
Memo Pad menus are shown here for your reference, and Memo Pad features that are not
explained elsewhere in this guide are described here. See page 31 for information about
choosing menu commands.
The Record and Options menus differ depending on whether you’re displaying the Memo list or
an individual memo.
Record menus
Memo list
Memo screen
Options menus
Memo screen
Memo list
Preferences
Displays the Memo Preferences dialog box, where you define the sort
order for memos.
About Memo Pad
Shows version information for Memo Pad.
Chapter 6
Page 145
CityTime
CityTime enables you to display the day and time in your home city and in four other cities around
the globe. Whether you’re travelling or at home, now it’s easy to keep track of the best time to
reach your business associates, friends, and family in far away places.
Note: CityTime does not automatically update the current time for Daylight Savings Time.
Setting your home city
The home city serves as a point of reference for your other city selections. The information
displayed for all the other cities is based on the day and time in your home city. When you use
CityTime for the first time (or when you travel or move to another city), make sure you set your
home city location. Setting your home city location ensures that CityTime displays accurate
information for the other cities you select.
To set your home city:
1. Press Option
and then press Blazer
.
Tip:
You can also access CityTime by tapping the CityTime icon
Launcher.
in the Applications
2. Press Menu
3. Under Options, select Select Home City (/H).
4. Tap the Home City pick list and select the city closest to where you are located.
.
Tip:
If a nearby city isn’t in the list, you can use the Edit Cities command to add a new city
to the list. See page 147 for details.
5. Hold Option
and press Return
to finish.
Selecting remote cities
In addition to your home city, you can display the day and time for four other cities anywhere
around the globe. These other cities are called remote cities.
To set your remote cities:
1. Tap a pick list in the lower part of the CityTime screen and select the city closest to the city
you want to display.
Tap to select
a remote city
Tip:
If a nearby city isn’t in the list, you can use the Edit Cities command to add a new city
to the list. See the next section for details.
Page 146
Application-Specific Tasks
2. Tap the remaining pick lists and select the other three cities you want to display.
Tip:
You can temporarily display the day and time for any other city by tapping the city’s
location on the map display.
Adding cities
If the city you want to display is not in the predefined list, you can use the Edit Cities command
to add it.
To add a city to the list:
1. Press Menu
.
2. Under Options, select Edit Cities (/E).
3. Tap New.
4. Enter the city name and other information.
5. Hold Option
and press Return
to finish.
CityTime menus
CityTime menus are shown here for your reference, and CityTime features that are not explained
elsewhere in this guide are described here. See page 31 for information about choosing menu
commands.
Options menu
About CityTime
Help
Shows version information for CityTime.
Displays online help for the CityTime screens.
Utilities menu
Change Location Opens the Change Location dialog box where you can select the city to
which you are moving or travelling. Changing the location updates the
system time and date.
Sun Rise/Set
Opens the Sun Rise/Set dialog box where you can view sunrise and
sunset information for your home city. To view this information for another
city, tap the City pick list and select the city from the list. To view this
information for another date, tap the scroll arrows next to the date box.
Chapter 6
Page 147
Calculator
Calculator includes two operating modes: Basic and Advanced. In Basic mode you can perform
simple mathematical calculations. In Advanced mode you can access scientific functions and
perform sophisticated math calculations. This section explains how to select the operating mode
and use the buttons and menu options available in each mode.
Selecting the Calculator mode
The Toggle Mode command enables you to choose whether you want to work in Basic Calculator
mode or Advanced Calculator mode. You can change modes at any time.
To select the Calculator mode:
1. Press Option
Tip:
and then press SMS Messaging
.
You can also access Calculator by tapping the Calculator icon
Launcher.
in the Applications
2. Press Menu
.
3. Under Options, select Toggle Mode (/M).
Tip:
You can also toggle between Basic and Advanced mode by holding Option
repeatedly press SMS Messaging
and
.
Using the Basic Calculator buttons
The Basic Calculator includes the following buttons.
Clears the last number you entered. Use this button if you make a mistake while
entering a number in the middle of a calculation. This button enables you to re-
enter the number without starting the calculation over.
Clears the entire calculation and enables you to begin a fresh calculation.
Toggles the current number between a negative and positive value. If you want to
enter a negative number, enter the number first and then press the +/- button.
Places the current number in memory. Each new number you enter with the M+
button is added to the total already stored in memory. You can add either a
calculated value or a number you enter by pressing the number buttons. Pressing
this button has no effect on the current calculation (or series of calculations); it
merely places the value into memory until it is recalled.
Recalls the stored value from memory and inserts it in the current calculation.
Clears any value that is stored in the Calculator memory.
Page 148
Application-Specific Tasks
Displaying Recent Calculations
The Basic Calculator’s Recent Calculations command enables you to review the last series of
calculations and is particularly useful for confirming a series of “chain” calculations.
To display recent calculations:
1. Press Menu
.
2. Under Options, select Recent Calculations (/I).
3. After you finish reviewing the calculations, hold Option
and press Return
to finish.
Using the Advanced Calculator mode
The Advanced Calculator screen consists of three regions. Each region performs a different
function to help you perform a variety of calculations.
Tap here
to change
View specific buttons
views
change with view
Primary buttons avail-
able in all views
Using the Advanced Calculator buttons
In addition to most of the Basic Calculator buttons, the Primary buttons are available in all the
Advanced Calculator views. The remaining buttons are available only in specific views. The
information that follows provides an overview of the Advanced Calculator functions. For more
detailed information and instructions, visit the website: www.radiks.net/~rhuebner/parendoc.html
Chapter 6
Page 149
Primary buttons
Clears the entire calculation and enables you to begin a fresh calculation.
Clears the last digit you entered. Use this button if you make a mistake while
entering a number in the middle of a calculation. This button enables you to re-
enter the number without starting the calculation over.
Enters an exponent symbol in the calculation.
Opens the Constants dialog box where you can select a constant to include in the
calculation.
Opens the Store in which memory dialog box where you can select the memory
bank in which you want to store the current value. Advanced Calculator has ten
memory banks.
Opens the Recall which memory dialog box where you can select the memory
bank from which you want to recall a value.
Math buttons
Squares the current value.
Calculates the value of x raised to the y power.
Calculates the value of a common (base 10) antilogarithm.
Calculates the value of a natural (base e) antilogarithm.
Calculates the reciprocal of the current number.
Displays the integer portion of a decimal value.
Calculates the square root of the current number.
Calculates the inverse of x to the y power.
Calculates the common (base 10) logarithm.
Calculates the natural (base e) logarithm.
Displays the remainder of x/y.
Displays the decimal portion of a decimal value.
Page 150
Application-Specific Tasks
Trigonometry buttons
Calculates the sine of the current number.
Calculates the cosine of the current number.
Calculates the tangent of the current number.
Calculates the hyperbolic sine of the current number.
Calculates the hyperbolic cosine of the current number.
Calculates the hyperbolic tangent of the current number.
Calculates the arc (inverse) sine of the current number.
Calculates the arc (inverse) cosine of the current number.
Calculates the arc (inverse) tangent of the current number.
Calculates the arc (inverse) hyperbolic sine of the current number.
Calculates the arc (inverse) hyperbolic cosine of the current number.
Calculates the arc (inverse) hyperbolic tangent of the current number.
Finance buttons
Finance buttons enable you to find an unknown variable value based on a group of known variable
values. For example, to calculate the monthly payment for a 30-year home loan of $100,000 with
an annual interest rate of 8%, you would enter the following variables:
■
■
■
■
■
Payments/year = 12
N = 360 (30 years x 12 months)
APR = 8
PV = 100,000
FV = 0
Using these variables, the answer would be -733.76 per month.
To solve this example:
1. Enter a value and then tap the corresponding variable button. Repeat this process until you’ve
entered the following four variables:
■ N = 360 (30 years x 12 months)
■ APR = 8
Chapter 6
Page 151
■ PV = 100,000
■ FV = 0
2. Enter 12 and tap the P/Yr button to enter the number of payments per year.
3. Tap Edit.
4. Tap the Pmt line and erase all values on the line including zero.
5. Tap Solve.
6. Hold Option
and press Return
to finish.
You can use a similar process to solve other financial equations by entering four of the variables
to find the value of the fifth variable.
Stores the current number as the total number of payments over the life of the
loan.
Stores the current number as the annual percentage rate of interest.
Stores the current number as the number of payments per year.
Stores the current number as the initial loan amount.
Stores the current number as the payment amount.
Stores the current number as the compounded loan amount including interest.
Opens the Time Value of Money dialog box where you can modify values and solve
the equation.
Stores the remaining balance, interest, and principal (amortization) based on the
supplied values.
Calculates a given percentage of a value. To use this button, enter a value, tap this
button, enter the percent, and then tap the equal sign button.
Calculates the change in a value by a given percentage. To use this button, enter
a value, tap this button, enter the percent, and then tap the equal sign button.
Calculates the percentage of one number relative to another number. To use this
button, enter the first number, tap this button, enter the second number, and then
tap the equal sign button.
Calculates the percentage required to get to one value from another value. To use
this button, enter the result number, tap this button, enter the starting number, and
then tap the equal sign button.
Page 152
Application-Specific Tasks
Logic buttons
Shifts the value to the left and fills the new places with zeros.
Enters D in a hexadecimal calculation.
Enters E in a hexadecimal calculation.
Enters F in a hexadecimal calculation.
Calculates bit-by-bit commonalities between two arguments.
Calculates bit-by-bit unique occurrences in two arguments.
Shifts the sign bit to the right in signed mode.
Enters A in a hexadecimal calculation.
Enters B in a hexadecimal calculation.
Enters C in a hexadecimal calculation.
Calculates the inverse of each bit of the argument.
Calculates the exclusive OR between two arguments.
Statistics buttons
Adds the current value to the end of the statistics memory list. You can store up
to 200 values.
Calculates the mean of the values in the statistics memory list.
Calculates the standard deviation based on a population of n.
Calculates the standard deviation based on a population of n-1.
Calculates the sum of the values in the statistics memory list.
Calculates the square of the sum of the values in the statistics memory list.
Opens the Statistical Data dialog box where you can view, edit, delete, and clear
values in the statistics memory list.
Displays the number of values in the statistics memory list.
Calculates the factorial of any integral from 0 to 170.
Chapter 6
Page 153
Generates a random number between 0 and 32767 and then divides this number
by 32768 to generate a random fraction between 0 and .99997.
Returns the number of combinations of n items taken m at a time.
Returns the number of permutations of n items taken m at a time.
Weight/Temp buttons
Indicates the current value is entered in ounces. When you tap this button after
tapping another unit of measure, it converts the value to ounces.
Indicates the current value is entered in pounds. When you tap this button after
tapping another unit of measure, it converts the value to pounds.
Indicates the current value is entered in US tons. When you tap this button after
tapping another unit of measure, it converts the value to US tons.
Indicates the current value is entered in UK tons. When you tap this button after
tapping another unit of measure, it converts the value to UK tons.
Indicates the current value is entered in milligrams. When you tap this button after
tapping another unit of measure, it converts the value to milligrams.
Indicates the current value is entered in grams. When you tap this button after
tapping another unit of measure, it converts the value to grams.
Indicates the current value is entered in kilograms. When you tap this button after
tapping another unit of measure, it converts the value to kilograms.
Indicates the current value is entered in metric tons. When you tap this button
after tapping another unit of measure, it converts the value to metric tons.
Indicates the current value is entered in degrees Fahrenheit. When you tap this
button after tapping another unit of measure, it converts the value to degrees
Fahrenheit.
Indicates the current value is entered in degrees Kelvin. When you tap this button
after tapping another unit of measure, it converts the value to degrees Kelvin.
Indicates the current value is entered in degrees Celsius. When you tap this button
after tapping another unit of measure, it converts the value to degrees Celsius.
Length buttons
Indicates the current value is entered in inches. When you tap this button after
tapping another unit of measure, it converts the value to inches.
Indicates the current value is entered in feet. When you tap this button after
tapping another unit of measure, it converts the value to feet.
Indicates the current value is entered in yards. When you tap this button after
tapping another unit of measure, it converts the value to yards.
Indicates the current value is entered in miles. When you tap this button after
tapping another unit of measure, it converts the value to miles.
Page 154
Application-Specific Tasks
Indicates the current value is entered in nautical miles. When you tap this button
after tapping another unit of measure, it converts the value to nautical miles.
Indicates the current value is entered in millimeters. When you tap this button after
tapping another unit of measure, it converts the value to millimeters.
Indicates the current value is entered in centimeters. When you tap this button
after tapping another unit of measure, it converts the value to centimeters.
Indicates the current value is entered in meters. When you tap this button after
tapping another unit of measure, it converts the value to meters.
Indicates the current value is entered in kilometers. When you tap this button after
tapping another unit of measure, it converts the value to kilometers.
Area buttons
Indicates the current value is entered in square inches. When you tap this button
after tapping another unit of measure, it converts the value to square inches.
Indicates the current value is entered in square feet. When you tap this button
after tapping another unit of measure, it converts the value to square feet.
Indicates the current value is entered in square yards. When you tap this button
after tapping another unit of measure, it converts the value to square yards.
Indicates the current value is entered in acres. When you tap this button after
tapping another unit of measure, it converts the value to acres.
Indicates the current value is entered in square miles. When you tap this button
after tapping another unit of measure, it converts the value to square miles.
Indicates the current value is entered in square millimeters. When you tap this
button after tapping another unit of measure, it converts the value to square
millimeters.
Indicates the current value is entered in square centimeters. When you tap this
button after tapping another unit of measure, it converts the value to square
centimeters.
Indicates the current value is entered in square meters. When you tap this button
after tapping another unit of measure, it converts the value to square meters.
Indicates the current value is entered in hectares. When you tap this button after
tapping another unit of measure, it converts the value to hectares.
Indicates the current value is entered in square kilometers. When you tap this
button after tapping another unit of measure, it converts the value to square
kilometers.
Chapter 6
Page 155
Volume buttons
Indicates the current value is entered in teaspoons. When you tap this button after
tapping another unit of measure, it converts the value to teaspoons.
Indicates the current value is entered in fluid ounces. When you tap this button
after tapping another unit of measure, it converts the value to fluid ounces.
Indicates the current value is entered in cups. When you tap this button after
tapping another unit of measure, it converts the value to cups.
Indicates the current value is entered in pints. When you tap this button after
tapping another unit of measure, it converts the value to pints.
Indicates the current value is entered in quarts. When you tap this button after
tapping another unit of measure, it converts the value to quarts.
Indicates the current value is entered in gallons. When you tap this button after
tapping another unit of measure, it converts the value to gallons.
Indicates the current value is entered in tablespoons. When you tap this button
after tapping another unit of measure, it converts the value to tablespoons.
Indicates the current value is entered in milliliters. When you tap this button after
tapping another unit of measure, it converts the value to milliliters.
Indicates the current value is entered in liters. When you tap this button after
tapping another unit of measure, it converts the value to liters.
Indicates the current value is entered in cubic inches. When you tap this button
after tapping another unit of measure, it converts the value to cubic inches.
Indicates the current value is entered in cubic feet. When you tap this button after
tapping another unit of measure, it converts the value to cubic feet.
Indicates the current value is entered in cubic meters. When you tap this button
after tapping another unit of measure, it converts the value to cubic meters.
Creating a custom view
You can modify any existing Advanced Calculator view to create your own view. While
customizing a view, you can change the button names as well as the button definitions.
To create a custom view:
1. From the Advanced Calculator screen, press Menu
2. Under Program, select Export (/E).
3. Tap the pick list and select the view you want to modify.
4. Tap Export.
.
5. Hold Option
and press Return
twice.
6. In Memo Pad, open the memo containing the definition you selected in step 3.
7. Modify the definition, and then hold Option
and press Return
.
Page 156
Application-Specific Tasks
8. From the Advanced Calculator screen, press Menu
9. Under Program, select Import (/I).
10. Tap the pick list and select the view you modified.
11. Tap Import.
.
12. Tap Replace to change an existing definition, or tap Add to create an additional definition.
13. Hold Option and press Return twice to finish.
Calculator menus
Calculator menus are shown here for your reference, and Calculator features that are not
explained elsewhere in this guide are described here. See page 31 for information about
choosing menu commands.
Options menus
Advanced Calculator
Basic Calculator
About Calculator Shows version information for Calculator.
Program menu
Advanced Calculator
Export
Opens the Export dialog box where you can select a view definition to export
to Memo Pad.
Import
Opens the Import dialog box where you can select a view definition to import
to Memo Pad.
Delete View
Opens the Delete View dialog box where you can delete a user-defined view.
Returns all the view definitions to the preset default values.
Restore
Defaults
Chapter 6
Page 157
Expense
Expense enables you to record the date, expense type, and the amount that you spent. A record
in Expense is called an “item.” You can sort your Expense items into categories or add other
information that you want to associate with the item.
To create an Expense item:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the Expense icon
.
3. Enter the amount of the expense.
Cursor
of new
item
Tap New
4. Tap the Expense type pick list and select a type from the list.
Tap here
Note: As soon as you select an expense type, your communicator saves the entry. If you don’t
select an expense type, it doesn’t save the entry.
Tip:
A quick way to create a new Expense item is to make sure that no Expense item is
selected in the Expense list, enter the first letter(s) of the expense type, and then enter
the numerical amount. This technique takes advantage of the automatic fill feature. See
the section that begins on page 162 for details.
Changing the date of an Expense item
Initially, Expense items appear with the date you enter them. You can use Expense to change the
date associated with any Expense item.
Page 158
Application-Specific Tasks
To change the date of an Expense item:
1. Tap the Expense item you want to change.
2. Tap the date of the selected item.
Tap date
3. Select the new date.
4. Hold Option
and press Return
to finish.
Entering receipt details
Expense provides a variety of options that you can associate with an item. These options appear
in the Receipt Details dialog box.
To open the Receipt Details dialog box:
1. Tap the Expense item to which you want to assign details.
2. Tap Details.
3. Select any of the following options:
Category
Type
See the section that begins on page 63 for details.
Opens a pick list of expense types.
Payment
Lets you choose the payment method used to pay the Expense item. If
the item is prepaid (such as airline tickets supplied by your company),
you can choose Prepaid to place your expense in the appropriate place
on your expense report.
Chapter 6
Page 159
Currency
Enables you to choose the type of currency used to pay the Expense
item. The default currency unit is defined in the Preferences dialog (see
page 162). You can also display up to four other common types of
currency. see the next section in this chapter for more information.
with the expense and the city where the expense was incurred. For
example, a business lunch might be at Rosie's Cafe (Vendor) in San
Francisco (City).
Attendees
See the section that begins on page 69 for details.
4. Hold Option
and press Return
to finish.
Customizing the Currency pick list
You can select the currencies and symbols that appear in the Currency pick list.
To customize the Currency pick list:
1. In the Receipt Details dialog box, tap the Currency pick list and select Edit currencies.
Tap Edit
currencies
2. Tap each Currency pick list and select the country whose currency you want to display on that
line.
3. Hold Option
and press Return
twice to finish.
Defining a custom currency symbol
If the currency you want to use is not in the list of countries, you can create your own custom
country and currency symbol.
To define a custom currency symbol:
1. Press Menu
.
2. Under Options, select Custom Currencies. (/Y)
3. Tap one of the four Country boxes.
Page 160
Application-Specific Tasks
Tap a Country box
4. Enter the name of the country and the symbol that you want to appear in Expense.
5. Hold Option
and press Return
twice to finish.
Note: If you want to use your custom currency symbol as the default for all Expense items,
select the symbol in the Preferences dialog box. If you want to use your custom currency
symbol only for a particular Expense item, select the symbol in the Receipt Details dialog
box associated with that item.
Show Options
Show Options define the sort order and other settings that relate to your Expense items.
To open the Show Options dialog box:
1. In the Expense list, tap Show.
2. Select any of the options.
Tap Show
Sort by
Enables you to sort expense items by date or type.
Distance
Enables you to display Mileage entries in miles or kilometers.
Shows or hides the currency symbol in the Expense list.
Show currency
3. Hold Option
and press Return
to finish.
Chapter 6
Page 161
Expense menus
Expense menus are shown here for your reference, and Expense features that are not explained
elsewhere in this guide are described here.
See page 31 for information about choosing menu commands.
Record menu
Options menu
Preferences
■
■
Use automatic fill. Lets you select an expense type by entering the first
letter of an expense type. For example, if you enter the letter “T,” it
enters the “Taxi” expense type. Entering “T” and then “E” enters
“Telephone” which is the first expense type beginning with the letters
“TE.”
Default currency. Sets the default currency symbol for Expense.
About Expense
Shows version information for Expense.
Page 162
Application-Specific Tasks
SIM Book
In addition to storing your phone number and billing information, your SIM card also contains a
phone list where you can store names and numbers that are separate from your Contacts and
Speed Dial lists. By storing a phone list on your SIM card, you have immediate access to your
phone list if you move your SIM card to another phone.
The SIM Book application is a utility that enables you to view and manage the phone list on your
SIM card.
Copying entries from your Speed Dial list to your SIM card
You can copy entries from your PhoneBook Speed Dial list to your SIM Book. This is a great way
to save time and keep your SIM Book up-to-date.
To copy entries from your Speed Dial list to your SIM card:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the SIM Book icon
.
3. Tap Speed Dial in the pick list in the upper-right corner.
4. Tap the entry you want to copy.
Tip:
To copy all the numbers in your Speed Dial list, press Menu
select Copy All.
, and under Edit,
Tap Speed Dial
Tap a name or number to select it
Tap Copy to add the en-
try to your SIM card
Tip:
A check mark indicates that the entry is already on both your Speed Dial list and your
SIM list.
5. Tap Copy.
Chapter 6
Page 163
Copying entries from your SIM card to your Speed Dial list
Just as you can copy entries from your PhoneBook Speed Dial list to your SIM Book, you can also
copy entries from your SIM card to your PhoneBook Speed Dial list.
To copy entries from your SIM card to your Speed Dial list:
1. Tap SIM in the pick list in the upper-right corner.
2. Tap the entry you want to copy.
Tip:
To copy all the numbers in your Speed Dial list, press Menu
select Copy All.
, and under Edit,
Tap SIM
Tap a name or number to select it
Tap Copy to add the entry to
your Speed Dial list
Tip:
A check mark indicates that the entry is already on both your Speed Dial and SIM list.
3. Tap Copy.
Deleting entries from your SIM card
If you find that you no longer need a phone number, you can delete it from your SIM card.
To delete entries from your SIM card:
1. Tap SIM in the pick list in the upper-right corner.
Tip:
To delete entries from your Speed Dial list, tap Speed Dial instead.
2. Select the entry you want to delete.
Tap to select SIM or Speed Dial
Tap a name or number to select it
Tap Delete to remove the entry
3. Tap Delete.
4. Hold Option
and press Return
to confirm deletion.
Page 164
Application-Specific Tasks
Dialing entries on your SIM card
In addition to storing phone numbers on your SIM card, you can also dial numbers using SIM Book.
To dial entries from your SIM card:
1. Tap SIM in the pick list in the upper-right corner.
Tip:
You can also dial entries from your Speed Dial list by tapping Speed Dial instead.
2. Select the entry you want to dial.
Tip:
You can also send a text message to an SMS-enabled mobile phone by tapping a
mobile phone number and then tapping SMS instead of Dial.
Tap to select SIM or Speed Dial
Tap a name or number to select it
Tap Dial to call the number
Tap SMS to send a text message
3. Tap Dial.
SIM Book menus
SIM Book menus are shown here for your reference, and SIM Book features that are not
explained elsewhere in this guide are described here.
See page 31 for information about choosing menu commands.
Edit menu
Options menu
Help
Opens a dialog where you can view tips about using the SIM Book application.
About
Opens a dialog where you can view version and copyright information for the
SIM Book application.
Chapter 6
Page 165
SIM Services
The SIM Services application provides an interface between your SIM card and your phone. It
enables your SIM card to store applications from your wireless service provider that can control
functions on your phone. For example, your wireless service provider might offer an application
that provides a secure connection for online banking services.
To use SIM Services
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the SIM Services icon
.
3. Tap the application you want to use.
Note: If your wireless service provider did not install any applications on your SIM card, a
message informs you that no services are on your SIM card.
4. If a list of options appears, tap the option you want to use.
Page 166
Application-Specific Tasks
Chapter 7
Setting Preferences for
Your Communicator
The Preferences screens enable you to customize the configuration options on your Treo™ 270
communicator.
In the Preferences screens, you can do the following:
Buttons
Assign different applications to many of the buttons and icons on your
communicator and the HotSync® cable.
Connection
Configure your communicator for use with a HotSync cable, for infrared
communication, or for wireless data communication.
Digitizer
Formats
Calibrate the screen on your communicator.
Set the country default and the formats for dates, times, calendar, and
numbers.
General
Set the current date and time, the auto shut-off interval, the Beam Receive
feature, and the system, alarm, and game sounds.
Network
Owner
Configure your communicator for use with a wireless data network.
Assign your name, phone number, and other owner information to your
communicator.
Ringer
Set the ringer volume level, unique ring tones for incoming calls and SMS
messages, and vibrate settings.
ShortCuts
Define a list of abbreviations.
Viewing Preferences
To open the Preferences screens:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the Preferences icon
.
3. Tap the pick list in the upper-right corner of the screen.
4. Select the Preferences screen you want to view.
Chapter 7
Page 167
Buttons Preferences
The Buttons Preferences screen enables you to associate different applications with the
application buttons on the front of your communicator and the HotSync button on the cable. For
example, if you find that you seldom use SMS Messaging and often use To Do List, you can
assign the SMS Messaging button to start To Do List. Any changes you make in the Buttons
Preferences screen become effective immediately; you do not have to change to a different
screen or application. If you assign a different application to a button, you can still access the
original application using the Applications Launcher.
To change the Buttons Preferences:
1. Tap the pick list next to the button or icon you want to re-assign.
Tap arrow to
show pick list
2. Tap the application that you want to assign to the button.
Tip:
To restore all of the buttons to their factory settings, tap Default.
HotSync Buttons Preferences
The HotSync Buttons Preferences screen also enables you to associate a different application
with the button on the HotSync cable. Any changes that you make in the HotSync Buttons dialog
box become effective immediately; you do not have to change to a different screen or application.
To change the HotSync Buttons Preferences:
1. From the Buttons Preferences screen, tap HotSync.
2. Tap the pick list.
Tap arrow to
show pick
list
3. Tap the application that you want to assign to the button.
The default setting for the button is the HotSync setting, which means the cable performs its
normal HotSync functions.
4. Hold Option
and press Return
to finish.
Page 168
Setting Preferences for Your Communicator
Connection Preferences
The Connection Preferences screen lets you create configurations for communicating with other
hardware devices: PC, Modem, or Infrared. Configurations, or profiles, once activated are available
to applications on your communicator. The Connection Preferences screen displays a list of
available configurations that you can modify as needed. This list will vary depending on the
software you have added to your communicator.
Connection Types
There are several types of device connections you can choose when configuring Preferences:
Serial
to PC
Defines the direct serial connection between your communicator and your
desktop computer. It is used to perform a local HotSync operation when your
communicator is connected by its serial connector to the cable. The cable is
attached to a serial (COM) port on your desktop computer.
Serial to
Modem
Defines a connection between a modem attached to the serial connector of your
communicator and a modem that is part of your computer or laptop.
Wireless
Defines a connection between your communicator’s built-in wireless modem
Modem to and a dial-up service. Use this connection type to access wireless data services.
Modem
Auto
Detect to
PC
Defines a dynamic serial connection between your communicator and your
desktop computer. Use this connection type with third-party applications that
need to reconfigure the serial port when communicating with a computer.
Auto
Detect to
Modem
Defines a dynamic serial connection between your communicator and a modem.
Use this connection type with third-party applications that need to reconfigure
the serial port when communicating with a modem.
USB/
Serial
to PC
Defines a direct serial or USB connection between your communicator and your
desktop computer. When you select this option, your communicator detects
which type of cable you have connected to your computer.
USB/
Serial
Defines a direct serial or USB connection between your communicator and a
modem. When you select this option, your communicator detects which type of
to Modem cable is connected to the modem.
USB
Defines the direct USB connection between your communicator and your
to PC
desktop computer. It is used to perform a local HotSync operation when your
communicator is connected by its USB connector to the cable. The cable is
attached to a USB port on your desktop computer.
IrCOMMto Defines a connection between the IR port of your communicator and the
PC infrared device of your computer or laptop.
IrCOMMto Defines a connection between the IR port of your communicator and a modem.
Modem
The modem can be attached to a computer or some other device containing an
IR port.
Chapter 7
Page 169
Setting wireless modem configurations
Wireless modem configurations enable you to use your communicator to communicate with your
ISP or dial-in server. In most cases the configuration software on the Handspring CD will set up
the Connection and Preferences settings you need to connect to your ISP or dial-in server. In the
event that you need to manually create a configuration, you must set Network Preferences in
addition to configuring Connection settings to define the communication protocols for the
selected device.
To create a Wireless Modem to Modem connection:
1. From the Connection Preferences screen, select Wireless Modem.
2. Tap Edit.
The name of the current configuration appears at the top of the screen.
3. Tap the Connection Method pick list and select Wireless Modem to Modem.
4. Tap the Dialing pick list and select TouchTone.
Note: Select Rotary only if your telephone service does not support TouchTone dialing.
5. Tap the Volume pick list and select the speaker volume for the modem.
6. Tap Details.
Page 170
Setting Preferences for Your Communicator
7. Tap the Speed pick list and select 57,600.
8. Tap the Country pick list and select the country in which you are using your communicator.
9. Tap the Flow Control (Flow Ctl) pick list, and select Automatic, On (Xon), or Off (Xoff) flow
control for the modem connection.
10. If needed, edit the Init String to change the modem setup string.
11. Hold Option
and press Return
twice to return to the Connection Preferences screen.
The following steps demonstrate how to create a modem connection that enables IR HotSync
through an IR enabled modem. This modem would then dial a modem attached to your desktop
to perform the remote HotSync operation.
To create an IrCOMM to Modem connection:
1. In the Connection Preferences screen, tap New.
2. Enter a name for this configuration.
3. Tap the Connection Method pick list and select IrCOMM to Modem.
4. Tap the Dialing pick list and select TouchTone or Rotary.
Note: Select Rotary only if your telephone service does not support TouchTone dialing.
5. Tap the Volume pick list and select the speaker volume.
6. Tap Details.
Chapter 7
Page 171
7. Enter the initialization string appropriate for your communicator.
8. Hold Option and press Return twice to return to the Connection Preferences screen.
Digitizer Preferences
The Digitizer Preferences screen opens the digitizer calibration screen. This is the same screen
that appears when you start your communicator for the first time. You can recalibrate your screen
after a hard reset, or if your digitizer drifts.
Formats Preferences
Use the Formats Preferences screen to set the country default and the display format of the
dates, times, and numbers on your communicator.
Country default
The country default sets date, time, week start day, and number conventions based on geographic
regions where you might use your communicator. For example, in the United Kingdom, time often
is expressed using a 24-hour clock. In the United States, time is expressed using a 12-hour clock
with an AM or PM suffix.
All your communicator applications use the Country default settings. See the next section in this
chapter for information on customizing these settings.
To set the country default:
1. Tap the country name pick list.
2. Tap the setting you want to use.
Page 172
Setting Preferences for Your Communicator
Time, date, week start, and numbers formats
The Time setting defines the format for the time of day. The time format that you select appears
in all applications on your communicator.
To select the time, date, week start, and numbers format:
1. Tap the Time pick list and select a format.
2. Tap the Date pick list and select a format.
3. Tap the Week starts pick list, and select whether you want the first day of the week to be
Sunday or Monday.
Note: This setting controls the Day, Week, Month, Year, and List views in Date Book Plus
and all other aspects of your communicator that display a calendar.
4. Tap the Numbers pick list, and select formats for the decimal point and thousands separator.
General Preferences
The General Preferences screen enables you to set the time, date, auto shutoff interval, the beam
receive feature, and sounds for your communicator. See the section that begins on page 21 for
information on setting the time and date.
Auto-off delay
Your communicator has an automatic shutoff feature that turns off the power after a period of
inactivity. This feature conserves battery power if you forget to turn off your communicator. If you
find that your communicator shuts itself off before you finish viewing information on the screen,
increase the auto-off setting.
To set the Auto-off delay:
1. Tap the Auto-off pick list.
2. Tap the setting you want to use for the automatic shutoff feature: 30 seconds, 1 minute, 2
minutes, or 3 minutes.
Note: The Auto-off setting turns off only the handheld mode on your communicator. It does not
turn off your communicator’s wireless mode. So, you can still receive calls, e-mail and
SMS messages after the automatic shutoff period.
Chapter 7
Page 173
System, alarm, and game sounds
Your communicator uses a variety of sounds. The System, Alarm, and Game Sound settings
enable you to turn the sounds on or off, and to adjust the volume level.
Note: If the ringer switch is set to no sound, the ringer setting overrides the sound settings and
all sounds are turned off. The system, alarm, and game sounds are used when the ringer
switch is set to the ring position.
To set the system, alarm, and game sounds:
1. Tap the System Sound pick list and select the sound level.
Note: When you turn off the System Sounds, you also turn off the “chime” tones associated
with the HotSync operation.
2. Tap the Alarm Sound pick list and select the sound level.
3. Tap the Game Sound pick list and select the sound level.
Note: The Game Sound setting works only with games that are programmed to respond to
this setting. Older games typically do not respond to this setting.
Network Preferences and TCP/IP software
Network Preferences let you set a password, telephone number, DNS number, IP address, as well
as create a login script for remote connections. TCP/IP provides the ability to connect to your ISP
or dial-in server with applications that allow you to view the transmitted data. Visit the web site
www.handspring.com for information on third-party applications that take advantage of TCP/IP.
When you use the Handspring CD-ROM to configure your communicator, the configuration
software attempts to set up your communicator with settings received from your wireless service
provider. If the Configure Your Treo software configured your communicator with your wireless
service provider’s settings, the Phone field on the Network Preferences screen is set to
“Wireless.” In this case, we recommend that you do not change the settings from your wireless
service provider. However, if the configuration software on the CD-ROM can’t complete the
configuration, you need to enter Network Preferences and TCP/IP settings to use your
communicator as a wireless data device. You can use a preset service template for your ISP or
dial-in server, and edit, save, and reuse settings. Or you can create your own service template.
To use the TCP/IP software included in the operating system, you must first configure the
Connection Preferences and then the Network Preferences settings. After you configure both of
these Preferences, you can establish a PPP (Point-to-Point Protocol), SLIP (Serial Line Internet
Protocol), or CSLIP (Compressed Serial Line Internet Protocol) connection with your ISP or dial-
in server. You can do this either by using menu commands from the Network Preferences screen
or by using a third-party application.
Selecting a service
Use the Service setting to select the service template for your ISP or a dial-in server. Service
templates are a set of ISP and dial-in server configuration settings that you can create, save, and
reuse.
Page 174
Setting Preferences for Your Communicator
To select a service:
1. Tap the Service pick list.
Tap here to display a list
of service templates
2. Tap the predefined service template.
Note: If you want to enter a name for a new service template, see page 179 for details.
Entering a user name
The User Name setting identifies the name you use when you log into your Internet Service
Provider or your dial-in server. Although this field can contain multiple lines of text, only two lines
appear onscreen.
To enter a user name:
1. Tap the User Name field.
2. Enter your user name.
Enter youruser name
here
Note: Most dial-in servers do not accept spaces in the user name.
Entering a password
The Password box identifies the password you use to log into your server or ISP. Your entry in
this field determines whether your communicator prompts you to enter a password each time you
log into your network:
■
If you do not enter a password, your communicator displays the word “Prompt” in this field
and asks you to enter a password during the login procedure.
■
If you enter a password, your communicator displays the word “Assigned” in this field and
does not prompt you to enter a password during the login procedure.
Note: If you are concerned about security, select the Prompt option and do not enter a
password.
Chapter 7
Page 175
To enter a password:
1. Tap the Password field.
2. Enter the password you use to log into your server.
Enter password here
Tap here
3. Hold Option
and press Return
to finish.
Note: The Password field updates to display the word “Assigned.”
Selecting a connection
The Connection Preferences settings tell your communicator about the hardware you are using
for remote data connections. Normally you’ll use your communicator’s built-in wireless modem to
establish a data connection, but you can also use the infrared port or connect an external modem
to the USB port. See the section that begins on page 169 for details on how to configure
Connection Preferences.
To select a connection:
1. Tap the Connection pick list.
The list displays the configurations in your Connection Preferences panel.
Tap to display a list of
connection configurations
2. Select the appropriate Connection.
Tip:
For wireless data access, select Wireless Modem to Modem as the Connection.
Page 176
Setting Preferences for Your Communicator
Adding telephone settings
When you select the Phone field, your communicator opens a dialog box in which you define the
telephone number you use to connect with your ISP or dial-in server. In addition, you can also
define a prefix, disable Call Waiting, and give special instructions for using a calling card.
Note: The Phone Setup dialog box works correctly for AT&T and Sprint long-distance services.
However, because MCI works differently, MCI customers need to put the calling card
number in the Phone # field and the phone number in the Use calling card field.
To enter your server phone number:
1. Tap the Phone field.
2. Enter the phone number you use to reach your ISP or dial-in server.
Enter your ISP phone
number here
3. If you need to enter a prefix or disable Call Waiting, skip to those procedures. Otherwise, hold
Option
and press Return
to finish.
Entering a prefix
A prefix is a number that you dial before the telephone number to access an outside line. For
example, many offices require that you dial “9” to dial a number outside the building.
To enter a prefix:
1. Tap the Dial Prefix check box to select it.
Select this
box if you
need to use
a prefix
Enter your
prefix here
2. Enter the prefix.
3. Hold Option
and press Return
to finish.
Chapter 7
Page 177
Disabling Call Waiting
Call Waiting can cause your session to terminate if you receive a call while you are connected. If
your telephone has Call Waiting, you need to disable this feature before logging into your ISP or
dial-in server.
To disable Call Waiting:
1. Tap the Disable call waiting check box to select it.
Select this
box if you
Enter your disable
code here
need to
disable Call
Waiting
2. Enter the code to disable Call Waiting on the Disable call waiting line.
Note: Each telephone company assigns a code to disable Call Waiting. Contact your local
telephone company for the code that is appropriate for you.
3. Hold Option
and press Return
to finish.
Using a calling card
The Use calling card field enables you to use your calling card when dialing your ISP or Intranet
server. Keep in mind that there is usually a delay before you enter your calling card number. When
you define your calling card number, you need to add commas at the beginning to compensate
for this delay. Each comma delays transmission of your calling card number for two seconds.
To use a calling card:
1. Tap the Use calling card check box to select it.
Select this
box to use a
calling card
Enter your
calling card
number here
2. Enter your calling card number on the Use calling card line.
Note: It’s a good idea to add at least three commas at the beginning of your calling card
number to compensate for the cue delay.
Tip:
MCI customers must enter the calling card number in the Phone # field, and the
phone number in the Use Calling Card field.
3. Hold Option
and press Return
to finish.
Page 178
Setting Preferences for Your Communicator
Connecting to your service
After you set your Connection and Network Preferences, establishing a connection to your
Internet Service Provider (ISP) or your company’s network (dial-in server) is easy.
To establish a connection:
■
Tap Connect to dial the current service and display the Service Connection Progress
messages.
Tip:
To see expanded Service Connection Progress messages, press the bottom scroll
button.
To close a connection:
Tap Disconnect to terminate the connection between your communicator and your service.
■
Creating additional service templates
You can create additional service templates from scratch or by duplicating existing templates and
editing information. After you create a new or duplicate template, you can add and edit settings.
To add a new service template:
1. Press Menu
.
2. Under Service, select New (/N).
A new service template (called Untitled) is added to the Service pick list.
To duplicate an existing service template:
1. Tap the Service pick list.
2. Tap the predefined service template you want to duplicate.
3. Press Menu
.
4. Under Service, select Duplicate (/L).
A copy of the service template is added to the Service pick list.
Adding detailed information to a service template
If you are using one of the predefined service templates, you probably only need to enter your
user name and telephone number. If you are creating a new service template, you may need to
provide additional information to your ISP or dial-in server. You use the Details dialog box to add
additional information to a selected service template.
Chapter 7
Page 179
To select a connection type:
1. Tap the service field.
2. Tap Details.
Select connection type
3. Tap the Connection type pick list and select one of the following connection types:
PPP
Point-to-Point protocol
SLIP
CSLIP
Serial Line Internet Protocol
Compressed Serial Line Internet Protocol
Note: If you are not sure, try PPP; if that doesn’t work, ask your Internet Service Provider or your
System Administrator for the correct connection type.
Idle timeout
The Idle timeout setting defines how long your communicator waits before dropping the
connection with your ISP or dial-in server when you switch out of a TCP/IP application.
To set the Idle timeout:
1. Tap the Idle timeout pick list and select one of the following options:
Immediate
1 minute
Drops the connection to your ISP immediately when you switch to another
application.
Waits one minute for you to open another application before it drops the
connection.
2 minutes
3 minutes
Power Off
Waits two minutes.
Waits three minutes.
Keeps your PPP or SLIP connection until you turn off your communicator (or
until it times out). See page 173 for information on the Auto-off delay setting.
2. Hold Option
and press Return
to finish.
Page 180
Setting Preferences for Your Communicator
Defining primary and secondary DNS
The Domain Naming System (DNS) is a mechanism in the Internet for translating the names of
host computers into IP addresses. When you enter a DNS number (or IP address), you are
identifying a specific server that handles the translation services.
Each IP address has four sections, separated by periods. In the Details dialog box, you enter each
section separately. Each section of an IP address is made up of a number from 0 to 255; numbers
are the only allowable characters in this field.
Ask your Internet Service Provider or System Administrator for the correct Primary or Secondary
DNS IP numbers.
Note: Most Internet Service Providers automatically provide DNS information. Leave the Query
DNS option checked unless you are certain you need to manually enter DNS information.
To enter a primary and secondary DNS:
1. Tap the Query DNS check box to deselect it.
2. Tap the space to the left of the first period in the Primary DNS field, and then enter the first
section of the IP address.
Note: Each section must be a number from 0 to 255.
3. Repeat step 2 for the second, third, and last sections of the Primary DNS field.
4. Repeat steps 2 and 3 for the Secondary DNS number.
5. Hold Option
and press Return
to finish.
IP address
Everyone who logs on to the Internet needs to have a unique identifier (an IP address), whether
permanent or temporary. Some networks dynamically assign a temporary IP address when clients
log in. The IP Address field lets you identify whether your network provides automatic (dynamic)
temporary IP addressing.
Note: Most Internet Service Providers automatically assign IP addresses. Leave the Automatic
IP Address option checked unless you are certain you need to manually enter IP address
information.
To identify dynamic IP addressing:
■
Tap the IP Address check box to select it.
Tap to select
automatic IP
address
Chapter 7
Page 181
To enter a permanent IP address:
1. Tap the IP Address check box to deselect it and display a permanent IP address field below
the check box.
2. Tap the space to the left of the first period then enter the first section of the IP address.
Note: Each section must be a number from 0 to 255.
3. Tap and enter the remaining sections of the IP address.
4. Hold Option
and press Return
to finish.
Creating a login script
A login script is a series of commands, similar to an autoexec.bat file, that automates logging into
your ISP. You can create login script files by selecting commands from the Command pick list in
the Login Script dialog. Some commands from the Command pick list, such as Send, require you
to supply additional information. Those commands have a parameter field so that you can add the
necessary data.
Note: You can also use non-ASCII and literal characters in your login script. See Appendix C
for more information.
To create a login script:
1. Tap Script.
2. Tap the End pick list.
Tap here
3. Tap the command you want from the Command list. If the command requires additional
information, a field appears to the right of it for you to enter the information. The following
commands are available:
Wait For
Tells your communicator to wait for specific characters from the TCP/IP
server before executing the next command.
Wait For
Prompt
Detects a challenge-response prompt from the server and displays a
dynamically generated challenge value. When you enter the challenge value
into your token card, this generates a response value for you to enter on your
communicator. This command takes two arguments, separated by a vertical
bar (|) on the input line.
Page 182
Setting Preferences for Your Communicator
Send
Transmits specific characters to the TCP/IP server to which you are
connecting.
Send CR
Transmits a carriage return or LF character to the TCP/IP server to which you
are connecting.
Send User ID Transmits the User ID information entered in the User ID field of the Network
Preferences screen.
Send
Password
Transmits the password entered in the Password field of the Network
Preferences screen. If you did not enter a password, this command prompts
you to enter one. The Password command is usually followed by a Send CR
command.
Delay
Get IP
Prompt
End
Tells your communicator to wait a specific number of seconds before
executing the next command in the login script.
Reads an IP address and uses it as the IP address for your communicator.
This command is used with SLIP connections.
Opens a dialog box and prompts you to enter text of some kind (for example,
a password or a security code).
Identifies the last line in the login script.
4. Repeat steps 2 and 3 until the login script is complete.
5. Hold Option and press Return to finish.
Deleting a service template
There is only one way to delete a service template: use the Delete command from the Service
menu.
To delete a service template:
1. Tap the Service pick list.
2. Tap the service template you want to delete.
3. Press Menu
.
4. Under Service, select Delete (/D).
5. Hold Option
and press Return
to finish.
Chapter 7
Page 183
Network Preferences menu commands
The Network Preferences screen includes menu commands to make it fast and easy to create
and edit service templates. TCP/IP application menus are show here for your reference.
See page 31 for more information about choosing menu commands.
Service menu
Options menu
TCP/IP troubleshooting
If you are having a problem establishing a network connection using TCP/IP, check this section
and try the suggestions listed.
Checking your wireless service status
Make sure the wireless mode on your communicator is active and that you are in a coverage area.
The LED on the top of your communicator and the signal bars at the top of the PhoneBook screen
provide visual cues about the wireless mode status. See page 15 and page 80 for details.
Displaying expanded Service Connection Progress messages
It’s helpful to identify at what point in the login procedure the connection fails. An easy way to do
this is to display the expanded Service Connection Progress messages. Expanded Service
Connection Progress messages describe the current stage of the login procedure. Press the
bottom scroll button at any point during login to display these messages.
Viewing the Network Log
If viewing the expanded Service Connection Progress messages does not give you enough
information to find out why you cannot connect to your ISP or dial-in server, take a look at the
Network Log. The Network Log lists all of the communication that occurs between your
communicator and your dial-in server during the login procedure. The information in the Network
Log can help your ISP or your System Administrator pinpoint where the login procedure
communication fails and why.
To view the Network Log:
1. Press Menu
.
2. Under Options, select View Log (/V).
3. Use the scroll buttons to see the entire Network Log.
4. Hold Option
and press Return
to finish.
Page 184
Setting Preferences for Your Communicator
Adding a DNS number
If your ISP or dial-in server requires a DNS number and you did not enter that information in the
Network Preferences screen, it will appear that you successfully logged into your network. When
you try to use an application or look up information, however, the connection fails. If this occurs,
try adding a DNS number. Ask your ISP or your System Administrator for the correct Primary and
Secondary DNS IP numbers.
Owner Preferences
The Owner Preferences screen enables you to record a name, company name, phone number, or
any other information that you want to associate with your communicator.
If you use the Security application to turn off and lock your communicator with a password,
information that you put in the Owner Preferences displays the next time you turn on your
communicator.
To enter the Owner Preferences:
■
Enter the text that you want to associate with your communicator in the Owner Preferences
screen. If you enter more text than can fit on one screen, a scroll bar automatically appears
on the right side of the screen.
If you assign a password with the Security application, the information in the Owner Preferences
screen cannot be changed. In this case, an Unlock button appears at the bottom of the screen.
To unlock the Owner Preferences screen:
1. Tap Unlock.
2. Enter the password that you defined in the Security application.
3. Hold Option
and press Return
to finish.
Chapter 7
Page 185
Ringer Preferences
The Ringer Preferences screen controls the behavior of the ringer on your communicator. You
can control the ring volume, select unique ring tones for incoming voice calls and SMS messages,
and turn the vibrate option on and off for each of the two ringer switch positions.
To select Ringer Preferences:
1. Tap the Ring Volume pick list and select the level you want to use for incoming voice calls
and SMS messages.
2. Tap the Call Tone pick list and select a ringer sound for incoming voice calls.
Note: When you select a ringer sound, the sound plays once. To avoid playing the sound,
move the ringer switch to the silent position before selecting a new ringer sound.
3. Tap the SMS Tone pick list and select a ringer sound for incoming SMS messages.
4. Tap the Vibrate check boxes to enable or disable the vibrate option for the corresponding
ringer switch position: Sound Mode
and Silent Mode
.
ShortCuts Preferences
The ShortCuts Preferences screen enables you to define abbreviations for entering text. This
section describes how to create, edit, and delete a ShortCut. See page 32 for information on the
use of ShortCuts.
Creating a ShortCut
You can create a ShortCut for any words, letters, or numbers. All ShortCuts you create appear on
the list in the ShortCut Preferences screen. All the ShortCuts are available in any of your
communicator applications and are backed up on your computer when you perform a HotSync
operation.
Page 186
Setting Preferences for Your Communicator
To create a ShortCut:
1. Tap New.
2. On the ShortCut name line, enter the letters you want to use to activate the ShortCut.
Tap New
3. Tap the ShortCut Text area and enter the text that you want to appear when you type the
ShortCut characters.
Tip:
You may want to add a space (space character) after the last word in your ShortCut
4. Hold Option
Tip:
and press Return
to finish.
To use a ShortCut, enter the ShortCut symbol followed by the ShortCut characters.
See page 32 for details.
Editing a ShortCut
After you create a ShortCut, you can modify it at any time.
To edit a ShortCut:
1. Tap the ShortCut you want to edit.
2. Tap Edit.
3. Make the changes you want.
4. Hold Option
and press Return
to finish.
Deleting a ShortCut
If you no longer need a ShortCut, you can delete it from the list of ShortCuts.
To delete a ShortCut:
1. Tap the ShortCut you want to delete.
2. Tap Delete.
3. Hold Option
and press Return
for Yes.
Chapter 7
Page 187
Page 188
Setting Preferences for Your Communicator
Chapter 8
®
Advanced HotSync Operations
HotSync® Manager enables you to synchronize data between one or more Palm OS® devices and
Palm™ Desktop software. To synchronize data, you must connect your Treo™ 270 communicator
attached to your computer or using infrared communication, or indirectly, with using the built-in
wireless modem.
This chapter describes how to select HotSync options and perform a HotSync operation via the
infrared port, the built-in wireless modem, or a network. See page 74 for information about
performing your first and subsequent local HotSync operations.
Selecting HotSync setup options
You can choose when you want HotSync Manager to run. If necessary, you can adjust the local
and modem HotSync settings as well.
To set the HotSync options:
1. Open Palm Desktop software.
2. From the HotSync menu, choose Setup.
3. Click the HotSync Controls tab and adjust the following options:
Enabled
Disabled
Prepares your computer to synchronize with your communicator.
Serial Port Monitor controls the serial port you specified, prevents
you from using the port for other operations, such as printing, faxing
or AppleTalk networking.
Turns off the Serial Port Monitor and makes the serial port available
for use by other applications.
Chapter 8
Page 189
Enable HotSync
Starts Serial Port Monitor automatically when you start your
softwareatsystem computer. You must restart your computer before this option takes
startup
affect.
If this option is not checked, you must enable Serial Port Monitor
manually in this dialog box.
Show more detail Provides troubleshooting information in the log when you perform a
in HotSync Log
HotSync operation. If you are having trouble synchronizing your
communicator with your computer, choose this option.
Tip:
If you’re not sure which options to use, keep the default settings: Enabled and Enable
HotSync software at system startup.
4. Click the Serial Port Settings tab to display the settings for the connection between your
computer and the HotSync cable, and to adjust the following options as needed.
Check for a Determines the method used to synchronize your communicator and your
connection desktop applications:
using
■
■
■
Local Setup. Synchronizes while your communicator and HotSync cable
are connected to your computer. Indicate which serial port the HotSync
cable is connected to and the speed of the data transfer in the Local
Setup options in this dialog box.
Modem Setup. Synchronizes while your Treo communicates to your
computer across a telephone line. Indicate which modem this computer
uses and which serial port the modem is connected to in the Modem
Setup options in this dialog box.
Both Setups. Synchronizes using the HotSync cable or the modem.
Indicate the connection details in both Local Setup and Modem Setup
options in this dialog box.
Note: Choosing Both Setups prevents you from using either port for other
operations such as printing, faxing, or AppleTalk networking.
Page 190
Advanced HotSync® Operations
Local
Specifies how the HotSync cable connects to your computer:
Setup
■
Speed. Determines the speed at which data transfers between your
communicator and Palm Desktop software. Try the As Fast As Possible
rate first, and adjust downward if you experience problems. This setting
allows Palm Desktop software and your communicator to find and use
the fastest speed.
■
Port. Identifies the port where you connected the HotSync cable. To
connect using a USB cable, select Handspring USB port.
Modem
Setup
Specifies how your communicator communicates with your computer
modem. See the section that begins on page195 for more information.
5. Close the HotSync Software Setup dialog box.
Customizing HotSync application settings
For each application, you can define a set of options that determines how records are handled
during synchronization. These options are called a “conduit.” By default, a HotSync operation
synchronizes all files between the communicator and your desktop software.
In general, you should leave the settings to synchronize all files. The only reason you might want
to change these settings is to overwrite data on either your communicator or your desktop
software, or to avoid synchronizing a particular type of file because you don’t use it.
In addition to the conduits for the applications on your communicator HotSync Manager includes
System and Install conduits. The System conduit backs up the system information stored on your
communicator, including keyboard ShortCuts. The Install conduit installs applications on your
communicator.
To customize HotSync application settings:
1. Open Palm Desktop software.
2. From the HotSync menu, choose Conduit Settings.
3. From the User pop-up menu, select your user name.
Chapter 8
Page 191
4. Select an application in the Conduit list.
5. Click Conduit Settings.
6. Click the direction in which you want to write data, or click Do Nothing to skip data transfer
for an application.
Note: Changing the HotSync setting from the default affects only the next HotSync
operation. Thereafter, the HotSync Actions revert to their default settings. To use a
new setting on an ongoing basis, click Make Default. Thereafter, whatever you
selected as the default setting is used when you perform a HotSync operation.
7. Click OK.
8. Repeat steps 4 through 7 to change conduit settings for other applications.
9. Close the Conduit Settings dialog box.
IR HotSync operations
Your communicator is equipped with an infrared (IR) port that supports the IrCOMM
implementation of the standards for infrared communication established by the Infrared Data
Association (IrDA). This means that you can beam data to any other device that supports the
IrCOMM implementation of the IrDA standards. Most importantly, you can use the IR port to
perform HotSync operations. When you use the IR port on your communicator to perform
HotSync operations, you don’t need your HotSync cable. You simply enable infrared
communication on your computer and your communicator and then perform an IR HotSync
operation. So there’s no need to carry your cable when you’re on the road with an infrared-enabled
laptop.
Preparing your computer for infrared communication
To perform an IR HotSync operation, the computer you want to synchronize with must have an
enabled infrared port or be connected to an infrared device that supports the IrCOMM
implementation of the IrDA standards.
Desktop computers are likely to require an infrared device attached to a physical port. Laptops
are likely to have a built-in IR port. Your computer must also have an installed infrared driver.
Does your computer support infrared communication?
the documentation that came with your computer to see if it supports infrared communication.
Page 192
Advanced HotSync® Operations
Configuring HotSync Manager for infrared communication
Next you need to go to the HotSync Manager and configure it for infrared communication.
To configure HotSync Manager for infrared communication:
1. Open Palm Desktop software.
2. From the HotSync menu, choose Setup.
3. In the HotSync Controls tab, select Enabled.
4. Click the Serial Port Settings tab.
5. Under Check for handheld connection using, select Local Setup.
6. Under Local Setup, select Infrared Port from the Port pop-up menu.
Select In-
frared
Port
7. Close the HotSync Software Setup dialog box.
The HotSync Manager is now communicating with the simulated port defined for infrared
communication.
Note: You cannot use your cable again until you reconfigure the HotSync Manager to
communicate with the port defined for cable synchronization.
Performing an IR HotSync operation
After you complete the steps to prepare for an IR HotSync operation it is easy to perform the
actual operation.
To perform an IR HotSync operation:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the HotSync icon
3. Tap Local.
.
4. Tap the pick list below the HotSync icon and select IR to a PC/Handheld.
Chapter 8
Page 193
5. Position your communicator’s IR port within a couple of inches of your computer’s infrared
port.
6. Tap the HotSync icon to start the IR HotSync operation.
Returning to cable HotSync operations
It’s easy to return to using the cable for HotSync operations.
To return to cable HotSync operations:
1. If needed, connect the cable to your computer.
2. Open Palm Desktop software.
3. From the HotSync menu, choose Setup.
4. In the HotSync Controls tab, select Enabled.
5. Click the Serial Port Settings tab.
6. Under Check for handheld connection using, select Local Setup.
7. Under Local Setup, select the port where your HotSync cable is connected from the Port
pop-up menu.
8. Close the HotSync Software Setup dialog box.
The next time you want to perform a HotSync operation just press the HotSync button on the
cable. You can leave the HotSync application on your communicator set to perform IR HotSync
operations and still use the cable. This is useful if you perform HotSync operations with both your
desktop computer and a laptop. When you are in the office just connect your communicator to
the cable and press the HotSync button. When you travel, you don’t have to carry a cable.
Page 194
Advanced HotSync® Operations
Conducting a wireless HotSync operation
Your communicator includes a built-in wireless modem which you can use for wireless
synchronization when you are away from your computer.
Note: The first HotSync operation must be local, using the cable. After that, you can perform a
wireless HotSync operation.
To perform a wireless HotSync operation you must complete the following steps:
■
■
■
Connect a modem to your computer
Configure HotSync Manager for use with your modem
Configure the Modem Preferences on your communicator
Preparing your computer
There are a few steps you must perform to prepare your computer for a wireless HotSync
operation. Be sure to perform these steps before you leave your office so that your computer is
ready to receive a call from your communicator.
To prepare your computer for a wireless HotSync operation:
1. Confirm that the computer modem is connected and turned on, and that no communications
applications, such as fax or telephony software, are running.
Note: Make sure the computer is disconnected from all online services, such as America
Online (AOL) and CompuServe. This helps to avoid port conflicts.
2. Open Palm Desktop software.
3. From the HotSync menu, choose Setup.
4. On the HotSync Controls tab, make sure that HotSync is Enabled.
5. Click the Serial Port Settings tab.
6. Under Check for handheld connection using, select Modem Setup.
7. Under Modem Setup, adjust the following options as needed:
Chapter 8
Page 195
Modem
Identifies the modem type or manufacturer. Refer to your modem
manual or face plate for its type or settings. If you’re not sure of your
modem type or your modem doesn’t match any that appear in the list,
select Hayes Basic. If you chose Custom from the Modem pop-up
menu, a Custom field appears. Use this field to enter a custom modem
setup string.
Port
Identifies the port for your computer modem.
Speaker
Turns the computer modem speaker on or off. If you’re having trouble
connecting, turn on the modem speaker to make sure that it is
responding to incoming calls.
8. Close the HotSync Software Setup dialog box.
Preparing your communicator
There are a few steps you must perform to prepare your communicator for a wireless HotSync
operation.
To prepare your communicator for a wireless HotSync operation:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the HotSync icon
3. Tap Modem.
.
4. Tap the pick list below the HotSync icon and select Wireless Modem.
5. Tap the Enter Phone # field.
Page 196
Advanced HotSync® Operations
6. Enter the telephone number to access the modem connected to your computer.
7. If needed, enter a dial prefix (such as “9”) to access an outside line, and then tap the Dial
Prefix check box.
Tip:
You can enter a comma in the field to introduce a “pause” in the dialing sequence.
Each comma equals a two second pause.
8. Select the Disable call waiting check box to avoid an interruption during the wireless HotSync
operation.
9. If you want to use a calling card to place the call, select the check box and enter the calling
card number.
10. Hold Option
and press Return
to finish.
Selecting the conduits for a wireless HotSync operation
The Conduit Setup dialog box on your communicator enables you to define which files and/or
applications synchronize during a wireless HotSync operation. You can use these settings to
minimize the time required for wireless synchronization.
To change the Conduit Setup for a wireless HotSync operation:
1. Press Option
2. Tap the HotSync icon
3. Press Menu
4. Under Options, select Conduit Setup (/D).
and then press Menu
to access the Applications Launcher.
.
.
5. Tap the check boxes to deselect the files and applications that you do not want to synchronize
during a wireless HotSync operation. The default setting is to synchronize all files.
Note: Applications that do not have a database (such as games) do not synchronize — even
if you select the item in the Conduit Setup dialog box.
6. Hold Option
and press Return
to finish.
Chapter 8
Page 197
Performing a wireless HotSync operation
After you prepare your computer and your communicator, and select your Conduit Setup options,
you are ready to perform a wireless HotSync operation.
To perform a wireless HotSync operation:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Tap the HotSync icon
3. Tap the Modem icon
.
to dial the desktop modem and synchronize the applications.
4. Wait for the HotSync operation to finish. If you have any problems conducting a successful
HotSync operation, see Appendix B.
Creating a user profile
If you need to configure several Palm OS® communicators with specific information (such as a
company phone list) before distributing them to their actual users, you can create a user profile
to load the data into a communicator without associating that data with a user name. The User
Profile feature is designed only for the first-time HotSync operation, before you assign a User ID
to a particular communicator.
To create a user profile:
1. Open Palm Desktop software.
2. From the User pop-up menu, choose Edit Users.
3. Click New Profile.
4. Enter the name of the profile and click OK.
Page 198
Advanced HotSync® Operations
5. Close the Users dialog box.
6. From the User pop-up menu, choose the profile name and create the data for the profile (e.g.,
company phone list, etc.).
To use a profile for the first-time HotSync operation:
1. Connect the new communicator to the HotSync cable.
2. Press the HotSync button on the cable.
3. Select the profile that you want to load on the communicator, and click OK.
4. Click Yes to transfer all the profile data to the communicator.
The next time you perform a HotSync operation, Palm Desktop software prompts you to assign
a user name to the communicator.
Chapter 8
Page 199
Page 200
Advanced HotSync® Operations
Appendix A
Maintaining Your Communicator
This chapter provides information on the following:
■
■
■
Proper care of your Treo™ 270 communicator
Maximizing battery life
Resetting your communicator
Caring for your communicator
Your communicator is designed to be rugged and reliable and to provide years of trouble-free
service. Please observe the following general tips when using your communicator:
■
Take care not to scratch the screen of your communicator. Keep the screen clean. When
working with your communicator, use the supplied stylus or plastic-tipped pens intended for
use with a touch-sensitive screen. Never use an actual pen or pencil or other sharp object on
the surface of the communicator screen.
■
Your communicator is not waterproof and should not be exposed to rain or moisture. Under
extreme conditions, water may enter the circuitry through the front panel buttons. In general,
treat your communicator as you would a pocket calculator or other small electronic
instrument.
■
■
The touch-sensitive screen of your communicator contains a glass element. Take care not to
drop your communicator or subject it to any strong impact. Do not carry your communicator
in your back pocket: if you sit on it, the glass may break.
Protect your communicator from temperature extremes. Do not leave your communicator on
the dashboard of a car on a hot day, and keep it away from heaters and other heat sources.
■
■
Do not store or use your communicator in any location that is extremely dusty, damp, or wet.
Use a soft, damp cloth to clean your communicator. If the surface of the communicator screen
becomes soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution.
Battery considerations
Please note the following considerations when using the rechargeable battery in your
communicator:
■
When wireless mode is on, your communicator battery should provide 150 hours of stand-by
time, or 3 hours of talk time between charges. When you use your communicator in handheld
of use between charges.
■
You can conserve battery life by minimizing use of the keyboard backlight feature and by
choosing a lower Auto-off setting which automatically turns the communicator off after a
period of inactivity. See page 173 and page 18 for more information.
Appendix A
Page 201
■
■
If the battery becomes low in the course of normal use, an alert appears on the communicator
screen describing the low battery condition. If this alert appears, connect your communicator
to the HotSync cable or travel charger to charge the battery.
If the battery drains to the point where your communicator does not turn on, it stores your
data safely for about three days. In this case, there is enough residual energy in the battery
to store the data, but not enough to turn on your communicator. If your communicator does
not turn on when you press the power button, you should charge the battery immediately.
■
If you leave a drained battery in your communicator for an extended period of time, you can
lose all of the stored data. If this happens, charge the battery and use the reset button to reset
your communicator as described in the next section. After you reset your communicator,
perform a HotSync operation to restore the data from your computer.
Resetting your communicator
Under normal circumstances, you will not have to use the reset button. On rare occasions,
however, your communicator may no longer respond to buttons or the screen. In this case, you
need to perform a reset to get your communicator running again.
Performing a soft reset
A soft reset tells your communicator to stop what it’s doing and start over again. All records and
entries stored in your communicator are retained with a soft reset. After a soft reset, the Welcome
screen appears, followed by the General Preferences screen (to set time and date).
To perform a soft reset:
1. Unscrew the tip of the stylus to access the reset tool.
Reset tool
2. Use the reset tool to gently press the reset button inside the hole on the back panel of your
communicator.
Tip: You can also use the tip of an unfolded paper clip (or similar object without a sharp tip).
Page 202
Maintaining Your Communicator
Performing a warm (or safe) reset
A warm (or safe) reset bypasses system extensions on your communicator, such as HackMaster
hacks or system patches. Performing a warm reset enables you to uninstall a third-party
application that may be causing a problem.
To perform a warm (or safe) reset:
1. Press and hold the top scroll button on the front panel of your communicator.
2. While holding down the top scroll button, use the reset tool (or similar object without a sharp
tip) to gently press the reset button.
3. When the system screen appears, release the top scroll button.
Performing a hard reset
With a hard reset, all records and entries stored in your communicator are erased. Never perform
a hard reset unless a soft or warm reset does not solve your problem.
Note: You can restore any data previously synchronized with your computer during the next
HotSync operation.
To perform a hard reset:
1. Press and hold the power button on the top of the communicator.
2. While holding down the power button, use the reset tool (or similar object without a sharp tip)
to gently press and release the reset button.
3. When the system screen appears, release the power button.
4. When a message appears on the communicator screen warning that you are about to erase
all the data stored on your communicator, do one of the following:
■ Press the top scroll button on the front panel of your communicator to complete the hard
reset and display the Digitizer screen.
■ Press any other button to perform a soft reset.
Note: With a hard reset, the current date and time are retained. Formats Preferences and
other settings are restored to their factory default settings.
5. If the language selection screen appears, select the same language you selected for your
desktop software. Choosing a different language may result in loss of data.
Appendix A
Page 203
To restore your data after a hard reset:
1. Open Palm Desktop software.
2. From the HotSync menu, choose Conduit Settings.
3. From the User pop-up menu, select your user name.
4. Select an application in the Conduit list.
5. Click Conduit Settings.
6. Select Macintosh overwrites handheld.
Note: Changing the HotSync setting from the default affects only the next HotSync
operation. Thereafter, the HotSync Actions revert to their default settings. To use a
new setting on an ongoing basis, click Make Default. Thereafter, whatever you
selected as the default setting is used when you perform a HotSync operation.
7. Click OK.
8. Repeat steps 4 through 7 to change conduit settings for other applications.
9. Close the Conduit Settings dialog box.
10. Perform a HotSync operation.
Page 204
Maintaining Your Communicator
Appendix B
Troubleshooting Tips
If you encounter a problem with your Treo™ 270 communicator:
■
■
Review this section to see if your problem is listed
Check our web site at www.handspring.com for the latest technical support information
Note: Thousands of third-party add-on applications have been written for Palm OS® devices.
Unfortunately, we are not able to support such a large number of third-party applications.
If you are having a problem with a third-party application, please contact the developer or
publisher of that software.
Appendix B
Page 205
Operating problems
Problem
Solution
My communicator won’t
turn on.
Try each of these in turn:
■
■
■
■
Adjust the display settings.
Make sure the battery is fully charged.
Perform a soft reset. See page 202 for details.
If your communicator still does not operate, try a hard
reset. See page 203 for details.
My communicator keeps
turning itself off.
Your communicator is designed to turn itself off after a period
of inactivity. This period can be set at one, two, or three
minutes. Check the Auto-off setting. See page 173 for details.
My communicator is not
making any sounds.
■
Check the ringer switch setting on top of your
communicator. The
communicator.
setting turns off all sounds on your
■
Check the System Sound setting. See page 173 for
details.
My communicator has frozen. This is most commonly attributed to conflicts with third-party
software. Try each of these in turn:
■
■
Perform a soft reset. See page 202 for details.
Delete any application you recently installed. See page 42
for details.
■
Perform a warm reset. See page 203 for details.
■
■
Perform a hard reset. See page 203 for details.
Adjust the display settings.
I don’t see anything on my
communicator’s screen.
■
■
Charge the battery.
Perform a soft reset.
Tapping and keyboard problems
Problem
Solution
When I tap the buttons or
screen icons, it activates the
wrong feature.
Calibrate the screen. See page 172 for details.
Not all applications or screens have menus. Try changing to a
different application.
When I press Menu
nothing happens.
,
Page 206
Troubleshooting Tips
Wireless communication problems
Problem
Solution
I can’t use the wireless
features
■
■
Make sure your Treo battery is charged.
Make sure wireless mode is on. To turn on wireless mode,
press and hold the power button for at least two seconds,
until you hear a confirmation tone. An ascending tone
means wireless mode is now on, a descending tone means
wireless mode is now off.
I get a message that my SIM
card is missing when I turn on
my Treo
■
Make sure your SIM card is properly inserted. The metal
contacts must face up on the inside of the SIM door, and
the side with the corner cut must slide into the SIM slot
first. For details, see the instructions in the Quick
Reference guide.
■
■
Your SIM card may be damaged. Contact your wireless
service provider for a new card.
My Treo requires an unlocking
code (PIN), but I didn't set one
Your wireless service provider may have set the locking
code before you received your Treo. Enter the default
unlocking code (PIN) and then tap OK. In North America,
the default unlocking code is usually 1234 or 1111. If this
doesn't work, contact your wireless service provider.
Note: It is actually your SIM card that is locked, not your
Treo.
■
If you see the Unblock Phone screen instead of the Unlock
Phone screen, you entered the unlock code (PIN)
incorrectly three times, and your Treo is now blocked.
Contact your wireless service provider to obtain the
unblock code. If you enter the unblock code (PUK)
incorrectly ten times, your SIM is permanently disabled.
I called my wireless service
provider to activate my
Some wireless service providers require 24 hours or more to
activate your wireless service. If it has been longer than your
service, but wireless mode still wireless service provider’s activation period, report the problem
doesn’t work to your wireless service provider.
My phone number isn't on the Your wireless service provider may need to install your phone
Phone Info screen
number onto your SIM card. Contact your wireless service
provider to see if they can send a message to your Treo that
writes your phone number onto your SIM card.
Appendix B
Page 207
My Treo won't register to the
network
■
■
You are probably outside a network coverage area. Try
using another GSM phone to verify whether coverage is
available in your current location.
If coverage is available in your location, try your SIM card in
another GSM phone. If it still doesn’t work, your SIM card
may be malfunctioning. Contact your wireless service
provider for another SIM card.
■
Turn off the wireless mode on your communicator, and
then turn it on again. If a dialog appears asking if you want
to search for a network, tap Yes.
I tried dialing a phone number,
but my Treo just beeps at me
■
■
Make sure you dialed the correct number.
Wait a few minutes and try again. If the network is very
busy, calls cannot connect.
■
Verify that you are in a network coverage area and then
move a few yards away and try the call again. If you are in
a weak coverage area (1 bar of signal strength or less), you
may not be able to complete calls even though you are
registered to the network.
I can't dial international
numbers
you to enable international calling on your account. Call your
wireless service provider for details.
Call waiting doesn’t work
Enable call waiting in the Call Preferences dialog. See the
section that begins on page 97 for details. If the problem
persists, contact your wireless service provider to confirm that
this feature is available in your area.
Call forwarding doesn't work For security purposes, most wireless service providers require
you to enable this feature on your account even though there
is usually no extra charge. Call your wireless service provider to
enable call forwarding.
Caller ID blocking for my
outgoing calls doesn't work
Some wireless service providers require you to enable this
feature on your account. Call your wireless service provider to
enable blocking your Caller ID.
Some incoming caller’s
names don’t appear in Call
History
■
■
Find out if a caller has blocked their Caller ID.
Call History does not show names for records you marked
hidden in your Contacts list.
Page 208
Troubleshooting Tips
The Blazer® application won’t
connect to the Internet
■
■
Confirm that you wireless service plan includes data
services and not just voice minutes.
Check with your Internet Service Provider to confirm that
your Network Preferences settings are properly
configured.
1.Press Option
and then press Menu
to access
the Applications Launcher.
2.Tap the Preferences icon
.
3.Select Network from the pick list in the upper-right corner.
4.Check your Username, Password, and the phone number.
The phone number should be the number you use to dial-
in to your ISP.
5.Tap Connect. If the Connect button changes to a
Disconnect button after the connection dialogs finish,
your Network Preferences settings are working. If the
Connect button does not change, tap Details and enter
DNS and IP address information for your Internet Service
Provider.
Important:
AOL users must download AOL for Palm from
www.aol.com/anywhere/pda/palm/palmaol to
retrieve e-mail. AOL does not support web
browsing with Blazer.
Some phone numbers don’t
appear in the SMS Lookup
Make sure the number you want is identified as a mobile
number in your Contacts list. Only mobile phone numbers and
e-mail addresses appear when you use the SMS Message
Manager Address by Last Name Lookup feature.
I can’t send SMS messages
■
Make sure SMS services are enabled on your account by
checking the SMS Preferences dialog to see if the SMS
Message Center number is on this screen. If the number is
missing, contact your wireless service provider for the SMS
Message Center number and enter it in the SMS
Preferences dialog.
Note: Receiving SMS messages does not indicate that
you have a subscription to your wireless service
provider’s SMS service. You must subscribe to this
service to send or reply to messages.
■
■
Verify that you are in a GSM coverage area.
Make sure the destination number is correct. Some
wireless service providers require 11-digit phone numbers
for SMS messages.
Appendix B
Page 209
send an SMS message to an feature. You need to get the SMS Email Center number from
email address
your wireless service provider and enter it in the SMS
Preferences dialog. This number is different from the SMS
Message Center number you use to send messages to other
mobile phone numbers. See page 130 for details.
I get an error when sending a Some wireless service providers have difficulty sending long
long message to myself
SMS messages to your own phone number. Try sending long
messages as a series of smaller messages instead.
I get an error when making
data calls
■
Check with your wireless service provider to make sure
that data services are enabled on your account.
■
Verify that you are in a coverage area.
The SIM Book application
won't open
Make sure your SIM card is inserted in your Treo and that
wireless mode has been on for at least 30 seconds.
My SIM Book doesn’t display When a name or number is longer than will fit in the SIM Book
the full name and number
display, three dots appear to indicate that the entry contains
additional information. SIM Book does not truncate the actual
entry, it just does not appear on the screen.
Page 210
Troubleshooting Tips
Application problems
Problem
Solution
I tapped the Today button,
but it does not show the
correct date.
Your communicator is not set to the current date. Make sure
the Set Date box in the General Preferences screen displays
the current date. See page 22 and page 173 for details.
I know I entered some
records, but they do not
appear in the application.
■
Check the Categories pick list (upper-right corner of the
screen). Choose All to display all of the records for the
application.
■
Check Security and make sure that the Private Records
setting is set to Show private records.
■
■
In To Do List, tap Show and check whether Show Only
Due Items is selected.
I am having problems listing
memos the way I want to see
them.
If you cannot manually arrange the order of the memos in
the list screen, check the Memo Preferences setting.
Make sure that Sort by is set to Manual.
■
If you choose to view your memos alphabetically on Palm
Desktop software and then perform a HotSync®
operation, the memos on your communicator still appear
in the order defined in the Memo Preferences setting. In
other words, the sort settings that you use with Palm
Desktop software are not transferred to your
communicator.
I created an event in Date
Book Plus, but it doesn’t
appear in the Week View.
In the Week View, you cannot select overlapping events that
have the same start time. If you have two or more events with
the same start time, choose the Day View for the particular
day to see the overlapping events.
Appendix B
Page 211
HotSync problems
Problem
Solution
Why can’t I synchronize Try each of these in turn. After each step, try to synchronize to see
my communicator with
my computer?
if the problem persists:
■
■
Make sure you installed the software that came with your
communicator. You must install this software even if you
upgraded from another Palm OS handheld.
Make sure there are no active calls on your Treo before you
begin a HotSync operation. You cannot synchronize while you
have an active call, and you cannot make or receive calls during
a HotSync operation.
■
Make sure you selected your user name in Palm Desktop
software before beginning the HotSync operation.
■
■
Perform a soft reset. See page 202 for details.
Open the Palm folder and double-click the HotSync Manager
icon
. On the HotSync Controls tab, make sure the
Enabled option is selected. Click the Serial Port Settings tab. In
the first pane, select Local Setup. In the second pane, select As
Fast As Possible as the Speed and Handspring USB as the
Port.
■
■
Make sure the cable is connected securely to your computer
and your communicator.
If you are using a USB cable, disconnect any other USB devices
you are using. If you’re connecting your cable to a USB hub,
disconnect it and connect your cable directly to your computer.
■
■
Restart your computer.
If you installed a conduit from a third-party software developer,
contact the developer for support.
I did a HotSync
Make sure the correct options are selected in the Conduit Settings
operation, but one of my dialog box. See page 191 for details.
applications did not
synchronize.
I cannot launch the
HotSync Manager.
■
■
Make sure you are not running another program, such as
America Online, CompuServe, or WinFax, that uses the port you
selected in the Setup dialog box.
Reinstall the Palm Desktop software.
Page 212
Troubleshooting Tips
Check the following on your computer:
I tried to do a wireless
HotSync operation, but
it did not complete
successfully.
■
■
■
Make sure your computer is turned on and that it does not shut
down automatically as part of an energy-saving feature.
Make sure the modem connected to your computer is turned on
and is connected to the outgoing phone line.
Make sure the HotSync Manager is enabled. Open Palm
Desktop software, from the HotSync menu, choose Setup. Make
sure that the Enabled option is selected.
■
■
Check the HotSync Manager Modem Setup settings. Open Palm
Desktop software, from the HotSync menu, choose Setup. Click
the Serial Port Settings tab and make sure the Modem Setup
option is selected and that the Modem and Port settings match
your computer modem.
Make sure the modem you are using with your communicator
has an on-off switch. Your communicator cannot “wake up” a
modem that has an auto-off feature.
■
Make sure the modem is connected properly to a port on your
computer and is connected to the incoming phone line.
■
You may need to select a different Modem Type or enter a
custom Setup String. Most modems have a Setup String that
causes them to send initial connection sounds to a speaker.
You can use these sounds to check the modem connection.
■
■
Make sure you are not running another program, such as
WinFax, CompuServe, or America Online, that uses the port you
selected in the Setup dialog box.
Make sure your modem resets before you try again. (Turn off
your modem, wait a minute, then turn it back on.)
Check the following on your communicator:
■
Confirm that you are inside a coverage area, and that the signal
is strong.
■
■
Make sure the dialing instruction dials the correct phone number.
If you need to dial an outside line prefix, make sure you selected
correct code.
■
■
If the you have call waiting, make sure you selected the Disable
call waiting check box and entered the correct code in the Phone
Setup dialog box. See page 196 for details.
Make sure the connection is clear. Using a noisy connection can
interrupt communications.
Appendix B
Page 213
Beaming problems
Problem
Solution
I cannot beam data to
another IR-equipped Palm
OS device.
■
Confirm that your communicator and the other device are
between ten centimeters (approximately 4") and one
meter (approximately 39") apart, and that the path
between the two devices is clear of obstacles. Beaming
distance to other Palm OS devices may be different.
■
Check the General Preferences screen and make sure
the Beam Receive setting is on.
■
■
Move your communicator closer to the receiving device.
device.
■
Angle the sides of the two devices towards each other.
Perform a soft reset. See page 202 for details.
■
■
When someone beams data
to my communicator, I get a
message telling me it is out of
memory.
Your communicator requires at least twice the amount of
memory available as the data you are receiving. For
example, if you are receiving a 30K application, you must
have at least 60K free.
■
Perform a soft reset. See page 202 for details.
Page 214
Troubleshooting Tips
Password problems
Problem
Solution
I forgot the password, and my You can use Security to delete the password. If you do this,
communicator is not locked.
your communicator deletes all entries marked as private. You
can, however, perform a HotSync operation before you delete
the password: the HotSync process backs up all entries,
whether or not they are marked private. In this case, the
following procedure restores your private entries and lets you
access them:
1. Use the Palm Desktop software and the cable to
synchronize your data.
2. Tap Forgotten Password in Security to remove the
password and delete all private records.
3. Perform a HotSync operation to synchronize your data
your computer to your communicator.
I forgot the password and my If you assign a password and lock your communicator, you
communicator is locked.
must perform a hard reset to continue using your
communicator. See page 203 for details.
Technical support
If you cannot solve your problem after reviewing the sources listed at the beginning of this
appendix, check our web site www.handspring.com for the latest technical support information.
Before requesting support, please experiment a bit to reproduce and isolate the problem. When
you do contact support, please be ready to provide the following information:
■
■
■
The name and version of the operating system you are using
The actual error message or state you are experiencing
The steps you take to reproduce the problem
Page 215
Page 216
Troubleshooting Tips
Appendix C
Non-ASCII Characters for Login
Scripts
The following information enables you to create custom login scripts that require non-ASCII
characters. It is provided for advanced users who understand the use and requirements of such
characters in a custom login script.
Use of ^char
You may use the caret ( ^ ) to transmit ASCII command characters. If you send ^char, and the
ASCII value of char is between @ and _, then the character is automatically translated to a single-
byte value between 0 and 31.
For example, ^M is converted to a carriage return. If char is a value between a and z, then the
character sequence is translated to a single-byte value between 1 and 26. If char is any other
value, then the character sequence is not subject to any special processing.
For example, the string “Joe^M” transmits Joe, followed by a carriage return.
Carriage return and line feed
You may include carriage return and line feed commands as part of the login script, when entered
in the following format:
<cr>
<lf>
Sends or receives a carriage return
Sends or receives a line feed
For example, the string “waitfor Joe<cr><lf>” waits to receive Joe followed by a carriage return
and line feed from the remote computer before executing the next command in the script.
Literal characters
The backslash ( \ ) character defines that the next character is transmitted as a literal character,
and is not subject to any special processing ordinarily associated with that character.
Examples:
\^
\<
\\
Includes a caret as part of the string
Includes a < as part of the string
Includes a backslash as part of the string
Appendix C
Page 217
Page 218
Non-ASCII Characters for Login Scripts
Appendix D
Advanced Call Forwarding Options
Some wireless service providers support advanced call forwarding options through the use of
GSM feature codes. These advanced call forwarding options are turned on and off and configured
by dialing specific code numbers with your communicator.
Note: Not all wireless service providers support all of these codes. Contact your wireless service
provider for more information about which services are available to you.
To use the advanced call forwarding options:
1. Press PhoneBook
to access the Dial Pad view
.
2. Enter one of the codes from the charts that follow.
Note: Where the charts indicates to enter a number_to_forward_to, enter a full phone
number with a “1” and an area code if necessary. For example, you would use
*67*16505551234# for the first code in the first chart.
3. Press Return
to send the command.
Forwarding calls when your communicator is busy
Code
What it does
*67*number_to_ Forwards all calls you receive while you are busy on another call to the
forward_to#
number you entered. This option typically forwards calls when you ignore a
call, when you are on a wireless data call, or when you already have two
active calls. You can still answer call waiting calls.
*#67#
#67#
Reports whether you activated the call forwarding when busy option.
Deactivates call forwarding when busy, and the network stores the number
to which you were forwarding calls.
*67#
Reactivates the call forwarding when busy option, and uses the number
stored on the network when you deactivated this option with the #67#
code.
##67#
Deactivates call forwarding when busy, and the network erases the
number to which you were forwarding calls.
Appendix D
Page 219
Forwarding calls that you do not answer
Code
What it does
*61*number_to_ Forwards all calls you receive and do not answer. This option is similar to
forward_to#
*#61#
the way that voicemail typically works.
Reports whether or not you activated the call forwarding for calls you do
not answer option.
#61#
*61#
Deactivates the call forwarding for calls you do not answer option, and the
network stores the number to which you were forwarding calls.
Reactivates the call forwarding for calls you do not answer option, and uses
the number stored on the network when you deactivated this option with
the #61# code.
##61#
Deactivates the call forwarding for calls you do not answer option, and the
network erases the number to which you were forwarding calls.
Forwarding calls when your communicator is unreachable
Code
What it does
*62*number_to_ Forwards all calls you receive when your communicator is unreachable.
forward_to#
*#62#
This option typically forwards calls when wireless mode is off or your
communicator is outside a coverage area.
Reports whether you activated the call forwarding for calls when your
communicator is unreachable option.
#62#
Deactivates the call forwarding for calls when your communicator is
unreachable option, and the network stores the number to which you were
forwarding calls.
*62#
Reactivates the call forwarding for calls when your communicator is
unreachable option, and uses the number stored on the network when you
deactivated this option with the #62# code.
##62#
Deactivates the call forwarding for calls when your communicator is
unreachable option, and the network erases the number to which you were
forwarding calls.
General Commands
Code
What it does
#002#
Deactivates all advanced call forwarding options, and the network stores
the numbers to which you were forwarding calls.
##002#
Deactivates all advanced call forwarding options, and the network erases
the numbers to which you were forwarding calls.
Page 220
Advanced Call Forwarding Options
Other Product Information
FCC Statement
This device may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can re-
quire you to stop using the device if such interference cannot be eliminated. If you need assistance, contact Hand-
spring Customer Care.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including in-
terference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful in-
terference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
■
■
■
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet or circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help and for additional suggestions.
Exposure To Radio Frequency Energy (SAR)
In order to comply with FCC RF exposure safety guidelines, users MUST use a Handspring brand body-worn ac-
cessory during body-worn operation. Use of accessories not provided by Handspring or that have not been tested
for RF exposure compliance with this product may not comply with the FCC RF exposure safety guidelines and
should not be used.
See www.fcc.gov/oet/rfsafety/ for more information on RF exposure safety.
Responsible Party:
Handspring, Inc.
189 Bernardo Avenue
Mountain View, California 94043-5203
United States of America
(650) 230-5000
Page 221
Canadian RFI Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula-
tions.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du
Canada.
Safety and General Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. Read this information before using your in-
tegrated multi-service portable radio.
For the Safe and Efficient Operation of Your Radio, Observe These Guidelines
Your radio product contains a transmitter and a receiver. When it is ON, it receives and transmits radio frequency
(RF) energy. The radio operates in the frequency range of 800 MHz to 1990 MHz and employs digital modulation
techniques. When you use your radio, the system handling your call controls the power level at which your radio
transmits. The output power level typically may vary over a range from .001 Watts to 2 Watts.
Exposure to Radio Frequency Energy
Your Treo is designed to comply with national and international standards, including United States Federal Com-
munications Commission, OET Bulletin 65 supplement C; American National Standards Institute (ANSI) IEEE. C95.
1-1992; Cenelec EN 50360; and Industrie Canada RF exposure guidelines.
In order to comply with FCC RF exposure safety guidelines users MUST use a Handspring brand body-worn acces-
sory during body-worn operation. Use of accessories not provided by Handspring or that have not been tested for
RF exposure compliance with this product may not comply with the FCC RF exposure safety guidelines and should
not be used.
To assure optimal radio performance, always adhere to the following procedures:
■
■
■
When placing or receiving a phone call hold the radio as you would a telephone.
Speak directly into the microphone and position the antenna up over your shoulder.
DO NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects call quality and may cause
the radio to operate at a higher power level than needed.
Interference to Medical and Personal Electronic Devices
Most, but not all, electronic equipment is shielded from RF signals and certain electronic equipment may not be
shielded against the RF signals from your Treo communicator.
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum separation of six inches (6") be main-
tained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by the recommendations of Wireless Tech-
nology Research.
Persons with pacemakers should:
■
■
■
■
ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON.
NOT carry the phone in a breast pocket.
Use the ear opposite the pacemaker to minimize the potential for interference.
Turn the phone OFF immediately if you have any reason to suspect that interference is taking place.
Page 222
Other Product Information
Audio Safety
Some hearing aids may be affected by some digital wireless phones. You may want to consult your doctor in the
event of you experience interference with your hearing aid while using Treo. When using the speakerphone feature,
it is recommended that you place Treo at a safe distance from your ear.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hos-
pitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Interference to Other Electronic Devices
RF energy may affect improperly installed or inadequately shielded electronic operating and entertainment systems
in motor vehicles. Check with the manufacturer or representative to determine if these systems are adequately
shielded from external RF energy. Also check with the manufacturer of any equipment that has been added to the
vehicle.
Safety and General Use While Driving
Check the laws and regulations on the use of telephones in the area where you drive. Always obey them.
When using the phone while driving, please:
■
■
■
Give full attention to driving and to the road
Use hands-free operation, if available
Pull off the road and park before making or answering a call if driving conditions so require.
Aircraft Safety
Turn your radio OFF before boarding any aircraft to prevent possible interference to aircraft systems. Regulations
of the United States Federal Aviation Administration prohibit use when the aircraft is in the air and require you have
permission from a crew member to use your radio while the aircraft is one the ground.
Non-ionizing Radiation
As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment
and for the safety of the personnel, it is recommended that no part of the human body be allowed to come to close
to the antenna during operation of the equipment.
General Safety Information
As with other mobile radio transmitting equipment, users are advised to heed all posted warnings on the use and
operation of Treo and to turn off your device in any area with a potentially explosive atmosphere, such as fueling
stations, even where no warnings or notices are posted.
Emergency Calls
IMPORTANT! The Treo communications features operate using radio signals, like any wireless phone, wireless and
landline networks, and user-programmed functions. Therefore you should never rely solely upon Treo for essential
communications (for example, medical emergencies).
Remember, the phone feature must be on in order to make or receive calls and you must be in a service area with
adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain net-
work services and/or phone features are in use. Check with local service providers.
Page 223
Acknowledgments
We would like to thank the following developers whose contributions were an integral part of the Handspring
product:
■
■
■
C.E. Steuart Dewar
Pimlico Software, Inc.
www.gorilla-haven.org/pimlico
Darren Beck
Code City
www.codecity.com.au
Rick Huebner
www.probe.net/~rhuebner/index.html
Page 224
Other Product Information
Index
viewing as icons 39
viewing as list 39
Archive files
saving deleted records 61
Automatic fill, in Expense 162
Numerics
3-way calling 94
A
Accented characters
entering 29
onscreen keyboard 33
Active call 91, 93
Add-on applications 40–42
Adjusting volume 14
Alarm
preset 117
reminder 117
setting 104
sound 117, 174, 206
Anniversaries. See Repeating events
Antenna 15
51, 168
Applications
gauge 37, 80
Beaming information 76–78
beaming 76–77
Calculator 55
categories 38
CityTime 54
Date Book Plus 49
Expense 56
font style 74
installing 40–42
opening 37
menus 126
opening 50
overview 50
PhoneBook 48
preferences for 40
removing 42
Preferences 128
Properties 127
Boilerplates 135
Bold font for text 74
Bookmarks
security 43
SIM Phonebook 57
SIM Services 58
SMS Messaging 51
To Do List 52
adding 123, 124
arranging 125
deleting 125
editing 124
Business card for beaming 76
Buttons
3-way 94
power 15
active 91, 93
ringer 15
scroll 14, 85, 122, 132
Buttons preferences 168
answering 91–92
answering call waiting 93
conference 94
ignoring 91
incoming 89, 91–95
C
Cable
USB 24
switching 94
Calculator
Capital letters 27
Length view 154
application 38
Math view 150
memory 148
default 63
menus 157
opening 55, 148
overview 55
merging 65
renaming 65
selecting mode 148
Statistics view 153
Volume view 156
Call
Charger
Check boxes 20
Preferences 93, 95, 98
status 93, 94
waiting 93
menus 147
Call History 96
opening 54
deleting items 90
depth 128
Combining categories 65
Command buttons 20
Command equivalents (keyboard) 31
displaying 89
incoming calls 89
missed calls 89, 96
outgoing calls 89
purging 90
Call Waiting, disabling 178, 197
Page 226
Index
Communicator
Current time 37
setting 22
Customizing
overview 11
turning on/off 18
Compressing Day view 116
Conduits 191
See also Preferences
for synchronizing applications 212,
Connecting
headset 23
HotSync cable 23
calendar 101–103
events. See Repeating events
Journal 112
service templates 179
travel charger 17, 24
Connection preferences 169
Contacts
Data
Date Book Plus
copying 87
Continuous events
adding PhoneBook data to
records 67–68
changing 106
alarm 104
scheduling 105
Copying
contact information 87
Copying text 61
Cradle. See Cable
Creating
fonts 74
categories 38, 64–65
contact entries 85–86
currency symbols 160
Expense items 158
memos 144
menus 114
records 59
To Do List items 140
Currency
opening 49
overview 49
default 162
defining 160
for Expense items 160
Current date 22, 211
purging records 62
repeating events 62, 105–106
scheduling events 101–103
selecting dates 101
start time for Day view 115
Index
Page 227
templates 113
To Do List items 112
Week View with Text 108
Display control 14, 19
Dates
Expense item 158
Decimal point 173
Default
memos into other applications 53
E
categories 63
call forwarding number 95
menu 165
currency in Expense 162
Deleted
Deleting
applications 40, 42
Bookmarks 125
E-mail addresses
passwords 44
records 61
Speed Dial entries 84
text 60
35
removing 43
saving deleted data to an archive
file 61
system requirements 12
upgrading 12
See also PIM
Dial Pad
icon 85, 219
Dialing
menus 162
applications 98
emergency numbers 96
from Call History 90
from Contacts list 87
from SIM Book 165
last number 95
opening 56
overview 56
purging records 62
receipt details 159
previous numbers 85, 89
sorting records 70
Page 228
Index
type 159, 162
vendor 160
setting options 189–191
F
Finding
applications 37
information in applications 65–69
phone numbers 67–68
Fonts 74
alarm 104
Formats preferences 172
Forwarding
battery 80
calls 95, 219
SMS Email 130
SMS messages 136
Frozen communicator 206
note 73
onscreen 206
G
Games 174
General preferences
alarm sounds 174
auto-off delay 173
system sounds 174
GSM codes 219
Voicemail 80
Idle timeout of ISP or server
connection 180
Ignoring calls 91
Indicators
H
Handheld mode 18
Hard reset 203
Headset
signal strength 80
voicemail 80
connecting 23
Headset jack 14
Help
wireless mode 80
Keyboard 61
online tips 21
Hiding
HotSync operations 192–194
port 192
records 71
International characters
entering 29
Hold button 93
HotSync
buttons preferences 168
conduits for synchronizing
applications 191–192
customizing 191
defined 74
onscreen keyboard 33
IP address 179, 181
first-time operation 75, 198–199
HotSync Manager 74
Index
Page 229
IR port 15
See also Beaming information
Memo Pad
adding PhoneBook data to
IR. See Infrared
Items. See To Do List or Expense
applications 53
K
Key Pad 83, 91
Keyboard
fonts 74
accented characters 29
computer 33
menus 145
opening 53
overview 53
location 14
moving the cursor 30
numbers 28
online Help 61
Memory
onscreen 33
ShortCuts for entering data 32, 186–
187
Calculator 148
regaining 62
Keyboard backlight 18
Menus 31–32, 206
Blazer 126
L
choosing 31
LED 15, 17
Date Book Plus 114
PhoneBook 97
Letters
font style 74
onscreen keyboard 33
Light, see LED 15
Linking
List (Date Book Plus view) 110
Locking
SMS Messaging 138
185
Looking up PhoneBook data
to add to other records 67–68
scrolling in Contacts view 66
Looking up. See Finding
Lost records 211
checking 89
missed call 96
receiving 131
replying 132, 133
sorting SMS 137
Microphone 14
Missed calls 89, 96
Modem
M
HotSync operations via 195–198,
213
Main applications 37
Maintenance information 201
Meetings. See Date Book Plus
Modem port 196
Page 230
Index
Modes
handheld 18
SMS Messaging 51
To Do List 52
wireless 18
Monday, to start week 173
Month (Date Book Plus view) 109
Moving
menu 165
Outgoing calls 89, 95–96, 98, 165
Overlapping events 111
Overview
Date Book Plus events 103
the cursor 30
communicator 11
N
Network
connecting 179
idle timeout 180
name 80
Passwords 44–46
changing 44
creating 44
deleting 44
password 175
for network 175
phone settings 177
preferences 174–185
status 15
Phone application
starting 82, 96
TCP/IP 174
Phone Lookup 67–68
Phone numbers
selecting types 88
Phone settings for ISP or dial-in
server 177–178
user name 175
voicemail number 81
Network status 95
Notes
attaching to records 73
Numbers
adding custom fields 99
decimal point and thousands
separator 173
entering 28
onscreen keyboard 33
87
O
Opening
fonts 74
applications 37
Blazer 50
Calculator 55, 148
CityTime 54
Date Book Plus 49
Expense 56
menus 97
Memo Pad 53
PhoneBook 48
notes for Contacts records 73
opening 48
overview 48
Index
Page 231
sorting Contacts records 70
beaming 76–77
Pick lists 20
creating 59
defined 59
using with communicator 25
PIN 207
Ports
IR on communicator 192
PPP 179
fonts 74
Preferences 21
lost 211
Blazer 128
Buttons 168
Call 98
choosing 40
private 71
Connection 169
dialing 98
purging 62
sorting 70
Digitizer 172
Formats 172
Recurring events
General 173
deleting 62
HotSync buttons 168
Network 174–185
Owner 185
scheduling 105
Removing
ShortCuts 186
Primary DNS 181
Printing
records from applications 24
Private records
lost with forgotten password 46
Profiles 198
Proxy server 129
PUK 207
Renaming categories 65
Repeating events
scheduling 105
Reset button 16
Resetting communicator
warm reset 203
Punctuation marks
onscreen keyboard 33
typing 28
Purging
settings 186
Call History 90
switch 15
records 62
Rocker switch 14, 18, 21
SMS messages 138
Safety 222
R
Saving
Range of times in Day view 115
data 38, 59, 61
Scheduling events 101–103
Receipts, recording in Expense 159
Receiving data. See Beaming information
Page 232
Index
Screen
blank 206
enabling 130
calibrating 19, 172
touching 14
Inbox 131
Scroll bar 20
Security 43–46
changing password 44
deleting password 44
forgotten password 46
private records 71
Selecting
sorting messages 137
SMS Messaging
menus 138
opening 51
overview 51
Soft reset 202
date for event 101
text 60, 61
Sending
Speaker 14
Speakerphone 92
Speed Dial
data. See Beaming information
ShortCuts
164
deleting entries 84
list 81–84
managing 186–187
predefined 32
using 32
Signature 135
SIM Book 163–165
menus 165
voicemail 81
SIM card
defined 16
door 16
SIM Phonebook
holding 15
opening 57
SIM Services 166
opening 58
Switching calls 94
Symbols
Slider 186
SMS
for currency 160
Synchronizing data. See HotSync
System conduit 191
boilerplates 135
changing messages 136
Index
Page 233
System requirements for Desktop
software 12
private records 71
110
T
Tapping 19, 206
Task. See To Do List
TCP/IP 174, 184
Templates 135
Text
copying 61
cutting 60
finding 65
fonts for 74
displaying owner’s name 185
Thousands separator 173
Time
format 173
setting current 22
start and end for Date Book Plus Day
view 115
Time stamps 112
Tips, online 21
To Do List
adding PhoneBook data to
completion date 143
fonts 74
port 24
User profiles 198
Vibrate 186
menus 143
notes for records 73
opening 52
Voicemail 81, 91, 96
icon 80
overview 52
Volume 14
prioritizing records 140, 143
Page 234
Index
|
Nokia 2600 classic User Manual
Motorola XT926M User Manual
Motorola MB520 User Manual
Mellerware Coffeemaker 29003 User Manual
Marantz PMD331 User Manual
Emerson CKD1100 CKD1100BL CKD1100GN CKD1100PK User Manual
Bunn Coffeemaker GRX B User Manual
Belkin F4D162 2 User Manual
Agilent Technologies Cell Phone 8922M User Manual
Addonics Technologies AD5U2SA User Manual