User’s Manual
Single Board Computer 3301630
Version 1.0, April 2005
3301630 User’s Manual
Packing List:
Please check the package content before you starting using the board.
Hardware:
3301630 motherboard x 1
Cable Kit:
44-pin
40-pin
44-pin
ATA33 IDE Cable x1
Floppy Cable x 1
SATA Cable x 2
SDTV Cable x 1
Parallel cable x 1
YPbPr Cable x 1
COM port Cable x 2
DVI-I Y cable x 1
PS/2 Keybroad & Mouse cable x 1
CPU Cooler x 1
Audio cable with bracket x 1
Dual USB cable with bracket x 1
Printed Matters:
User’s Manual x 1
Driver CD x 1
3
3301630 User’s Manual
Index
Chapter 1 <Introduction> ............................................................................ 7
1.1 <Product Overview> .......................................................................... 7
1.2 <Product Specification>..................................................................... 8
1.3 <Mechanical Drawing> .................................................................... 10
1.4 <Block Diagram>..............................................................................11
Chapter 2 <Hardware Setup> .................................................................... 13
2.1 <Connector Location>...................................................................... 13
2.2 <Jumper Location & Reference>...................................................... 15
2.3 <Connector Reference>................................................................... 16
2.3.1 <Internal Connectors> ............................................................ 16
2.3.2 <External Connectors>........................................................... 16
2.4 <CPU and Memory Setup>.............................................................. 17
2.4.1 <CPU Setup>......................................................................... 17
2.4.2 <Memory Setup>.................................................................... 18
2.5 <CMOS Setup>............................................................................... 19
2.6 <Enhanced IDE Interface>............................................................... 20
2.7 <Serial ATA Interface> ..................................................................... 20
2.8 <Floppy Port>.................................................................................. 21
2.9 <Ethernet Interface>........................................................................ 22
2.10 <Onboard Display Interface> ......................................................... 23
2.10.1 <og Display> ........................................................................ 23
2.10.2 <Digital Display>................................................................... 24
2.10.3 <HDTV Interface>................................................................. 28
2.11 <Integrated Audio Interface> .......................................................... 29
2.12 <GPIO Interface>........................................................................... 31
2.13 <Power Supply> ............................................................................ 32
2.13.1 <Power Input>............................................................................ 32
2.14 <Switch and Indicator> .................................................................. 33
Chapter 3 <System Setup>........................................................................ 34
4
3301630 User’s Manual
3.1 <Video Memory Setup> ................................................................... 34
Chapter 4 <BIOS Setup>............................................................................ 36
Appendix A <I/O Port Pin Assignment>.................................................... 38
A.1 <IDE Port> ...................................................................................... 38
A.2 <Serial ATA Port> ............................................................................ 39
A.3 <Floppy Port>.................................................................................. 39
A.4 <IrDA Port> ..................................................................................... 40
A.5 <Serial Port>................................................................................... 41
A.6 <VGA Port>..................................................................................... 42
A.7 <LAN Port> ..................................................................................... 42
A.3 < USB Interface >............................................................................ 42
Appendix B <Flash BIOS>......................................................................... 43
B.1 <Flash Tool>.................................................................................... 43
B.2 <Flash BIOS Procedure>................................................................. 43
Contact Information................................................................................... 44
5
3301630 User’s Manual
(This Page is Left for Blank)
6
3301630 User’s Manual
Introduction
Chapter 1 <Introduction>
1.1 <Product Overview>
3301630 is the new generation of the Half-size PCI CPU card, with supporting last Intel
Pentium M processors for 533MHz front side bus, Intel 915GM and ICH6-M chipset,
integrated GMA900 graphics, DDR2 memory, REALTEK AC97 Audio, Serial ATA, mini
PCI and dual Gigabit LAN.
New Intel Pentium M Processor
The board supports last Intel Pentium M processors with 533MHz front side bus, 2MB L2
cache, to provide more powerful performance than before.
New features for Intel 915GM chipset
The board integrates Intel 915GM and ICH6-M chipset, to provide new generation of the
mobile solution, supports Intel GMA900 graphics, DDR2 400/533 memory, built-in high
speed mass storage interface of serial ATA,
Multimedia solution
Based on Intel 915GM and ICH6-M chipset, the board provides two high performance
onboard graphics, 24-bit dual channel LVDS interface, HDTV to meet the very
requirement of the multimedia application.
Flexible Extension Interface
The board provides one CompactFlash Type II slot and one mini-PCI slot.
Product Overview
7
3301630 User’s Manual
Introduction
1.2 <Product Specification>
General Specification
Form Factor
CPU
Half-size PCI CPU card
Intel® Pentium M (Does not support Celeron M 4xx seriesprocessors)
Package type: FC-PGA478
L2 Cache: 512KB/1MB/2MB
Front side bus: 400/533MHz
Memory
2 x 240-pin DDR2 400/533MHz SDRAM up to 2GB
Up to 8GB/s of bandwidth with dual-channel interleaved mode
Dual-Channel technology supported
Unbufferred, none-ECC memory supported only
Intel® 915GM (Northbridge) and ICH6-M (Southbridge)
Phoenix-Award v6.00PG 4Mb PnP flash BIOS
Power saving mode includes doze, standby and suspend modes. ACPI
version 1.0 and APM version 1.2 compliant
System reset programmable watchdog timer with 1 ~ 255 sec./min. of
timeout value
Chipset
BIOS
Green Function
Watchdog Timer
Real Time Clock
Enhanced IDE
Intel® ICH6-M built-in RTC with lithium battery
UltraDMA33/66/100 IDE interface supports up to 2 ATAPI devices
One 44-pin IDE port onboard
One CompactFlash Type II socket on solder side
Intel® ICH6-M integrates 2 Serial ATA interfaces
Up to 150MB/s of transfer rate
Serial ATA
Multi-I/O Port
Chipset
Intel® ICH6-M with Winbond® W83627THF controller
3 internal RS-232 serial ports one internal RS-232/422/485 serial ports
Two Hi-Speed USB 2.0 ports with 480Mbps of transfer rate
One internal
Serial Port
USB Port
Parallel Port
Floppy Port
IrDA Port
K/B & Mouse
GPIO
One standard type Floppy port
One IrDA compliant Infrared interface supports SIR
External PS/2 keyboard and mouse ports on near LAN port
One 12-pin Digital I/O connector with 8-bit programmable I/O interface
One CPU fan connectors for fan speed controllable
Smart Fan
VGA Display Interface
Chipset
Intel® 915GM GMCH (Graphic Memory Controller Hub)
Up to 128MB shared with system memory
CRT, LCD monitor with digital display
Onboard 24-bit dual channel LVDS interface
Onboard HDTV interface
Frame Buffer
Display Type
Connector
External DVI female connector on near LAN port
Onboard 40-pin LVDS connector
Onboard 8-pin TV-out connector
8
Product Specification
3301630 User’s Manual
Ethernet Interface
Introduction
Controller
Type
Marvell 88E8053 PCI Express Gigabit Ethernet controller
Triple speed 10/100/1000Base-T
auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
Connector
Dual External RJ45 connectors with LED on rear I/O panel
Audio Interface
Chipset
Intel® ICH6M with Realtek® ALC201A codec
2 channels
Interface
Connector
Onboard Audio connector for Line-out, Line-in, MIC-in
Onboard CD-IN connector
Expansive Interface
CF
One CompactFlash Type II socket on solder Side
One Mini-PCI socket for TYPE III (32-bit, 33MHz)
Power supply: +3.3V, +5V
PCI
Power and Environment
Power
Onboard 4-pin connector
Requirement
Dimension
Temperature
DC 5V/12V
185mm (L) x 121 (H) mm
o
o
P
P
Operating within 0 ~ 60P C (32 ~ 140P F)
o
o
P
P
Storage within -20 ~ 85P C (-4 ~ 185P F)
Ordering Code
3301630
Intel Pentium M Mini-ITX motherboard with onboard VGA, Dual Gigabit
LAN, SATA, USB 2.0 Ports, Audio, 4 x RS232 serial port, LVDS, HDTV,
Mini-PCI
The specifications may be different as the actual production.
Product Specification
9
3301630 User’s Manual
Introduction
1.3 <Mechanical Drawing>
10
Mechanical Drawing
3301630 User’s Manual
Introduction
1.4 <Block Diagram>
Intel Pentium M/Celeron M Processors
Intel GMA900 Graphics
LVDS
2 x 240-pin DDR2
DVI
SDVO
400/533MHz up to
2GB
915GM
HDTV
CompactFlash
2 x Serial ATA ports
UltraDMA33/66/100 IDE
ICH6-M
2 x USB2.0 ports
PCIE
PICMG
Marvell E8053
Gigabit LAN
ALC201A
Mini-PCI slot
2 x Serial ports
2 x Serial ports
1 x Floppy ports
8-bit GPIO
BIOS
1 x Parallel Port
IrDA
Block Diagram
11
3301630 User’s Manual
(This Page is Left for Blank)
12
3301630 User’s Manual
Hardware Setup
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
IDE
Floppy
CN_USB COM12 COM34 CN_ LPT
CN IR
CN_DIO
SYSFAN
JCSEL1
JCSEL2
CN_AUDIO
DVI
CN_VGA
RJ45_A
RJ45_B
PS2
CN_ATKB
JCFSEL SATA
JVLCD2 CN_INV CN_TV
CPUFAN
CN_PWR
CN_LVDS2
JFRNT CN_PS
Connector Location
13
3301630 User’s Manual
CF
14
3301630 User’s Manual
Hardware Setup
2.2 <Jumper Location & Reference>
Jumper
JRTC
Function
CMOS Operating/Clear Setting
CF with IDE mode selection
Panel Voltage Setting
Choose RS232/485/422
Choose RS232/485/422
JCFSEL
JVLCD
JCSEL1
JCSEL2
JRTC
JCFSEL
JVLCD2
Jumper Function
JCSEL1
JCSEL2
JCSEL1 1-2 short RS-232
JCSEL1 3-4 short RS-485
JCSEL1 5-6 short RS-422
JCSEL2 RS-232
JCSEL2 RS-485/422
RS232
RS485
RS422
Connector Location
15
3301630 User’s Manual
Hardware Setup
2.3 <Connector Reference>
2.3.1 <Internal Connectors>
Connector
Function
Remark
Standard
Standard
Silm
CPU
Socket479 for CPU
DDRIIA/B
IDE
240 -pin DDR2 SDRAM DIMM socket
44-pin IDE connector
FDD
34-pin slim type floppy connector
7-pin Serial ATA connector
5 x 2-pin audio connector
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
SATA1/2
CN_AUDIO
CDIN
4-pin CD-ROM audio input connector
6 x 2-pin digital I/O connector
5 x 2-pin USB connector
CN_DIO
CN_USB
CPUFAN
SYSFAN
CN_LVDS2
CN_INV
CN_IR
4-pin CPU cooler fan connector
3-pin system cooler fan connector
20 x 2-pin LVDS connector
5-pin LCD inverter connector
5-pin IrDA connector
CN_COM12/34 10 x 2-pin COM1/2/3/4 connector
CN_TV
JFRNT
MINIPCI
CF
4 x 2-pin TV-out connector
14-pin front panel switch/indicator connector
Mini-PCI socket
CompactFlash Type II socket
2.3.2 <External Connectors>
Connector
Function
Remark
Standard
Standard
Standard
DVI
DVI Digital VGA connector
RJ45 Lan port connector
PS/2 keyboard/Mouse connector
RJ45_A/B
KB/MS
16
Jumper Location & Reference
3301630 User’s Manual
Hardware Setup
2.4 <CPU and Memory Setup>
2.4.1 <CPU Setup>
The board comes with the socket479 for Intel Pentium M/Celeron M processors, it
supports new generation of Intel Pentium M processors with 533MHz of front side bus
and 2MB L2 cache. Please follow the instruction to install the CPU properly.
Check point
Unlock way
1. Use the flat-type
screw drive to unlock
the CPU socket
2. Follow the pin direction to install
the processor on the socket
3. Lock the socket
Note: {Does not support Celeron M 4xx Series processors}
Connector Location
17
3301630 User’s Manual
2.4.2 <Memory Setup>
Hardware Setup
The board provides two 240-pin DDR2 DIMMs to support DDR2 400/533 memory
modules up to 2GB of capacity. Non-ECC, unbuffered memory is supported only. While
applying two same modules, dual channel technology is enabled automatically for higher
performance.
DDRIIB/A
Please check the pin number to match the socket side well
before installing memory module.
18
Memory Setup
3301630 User’s Manual
Hardware Setup
2.5 <CMOS Setup>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC
1-2
Mode
Clear CMOS
Normal Operation
2-3
Default setting
JRTC
1
3
CMOS Setup
19
3301630 User’s Manual
Hardware Setup
2.6 <Enhanced IDE Interface>
The board has one UltraDMA33 IDE interface to support up to 2 ATAPI devices, and one
CompactFlash Type II socket on the solder side, with jumper JCFSEL for IDE
master/slave mode selection.
Jumper: JCFSEL
Type: onboard 3-pin header
JCFSEL
1-2
Mode
Master
Slave
2-3
Default setting
1
3
JCFSEL
2.7 <Serial ATA Interface>
Based on Intel ICH6-M, the board provides two Serial ATA interfaces with up to 150MB/s
of transfer rate.
SATA1
SATA2
20
SATA &IDE Setup
3301630 User’s Manual
Hardware Setup
2.8 <Floppy Port>
The board provides one standard type floppy port.
2
34
FDD
1
33
Floppy Port
21
3301630 User’s Manual
Hardware Setup
2.9 <Ethernet Interface>
The board integrates with two Marvell 88E8053 PCI Express Gigabit Ethernet controllers,
as the PCI Express 1x can speed up to 250MB/s of transfer rate instead of late PCI bus
with 133MB/s of transfer rate. The Marvell 88E8053 supports triple speed of
10/100/100Base-T, with IEEE802.3 compliance and Wake-On-LAN supported.
RJ45 LAN connector
22
Ethernet Interface
3301630 User’s Manual
Hardware Setup
2.10 <Onboard Display Interface>
Based on Intel 915GM chipset with built-in GMA (Graphic Media Accelerator) 900
graphics, the board provides one DVI connector on real external I/O port, and one 40-pin
LVDS interface with 5-pin LCD backlight inverter connector. The board provides dual
display function with clone mode and extended desktop mode for CRT,DVI,LCD and TV
2.10.1 <Digital Visual Interface Display>
Please connect your CRT or LCD monitor with DVI male connector to the onboard
female connector on rear I/O port.
DVI
Digital Visual Interface Display
23
3301630 User’s Manual
Hardware Setup
2.10.2 <Digital Display>
The board provides one 40-pin LVDS connector for 24-bit single/dual channel panels,
supports up to 1600 x 1200 (UXGA) and 1920 x 1200 (WUXGA) of resolution, with one
LCD backlight inverter connector and one jumper for panel voltage setting.
1
5
1
3
_
CN_INV
JVLCD2
39
40
1
2
CN_LVDS2
24
Onboard Display Interface
3301630 User’s Manual
Hardware Setup
Connector: CN_INV
Type: 5-pin LVDS Power Header
Connector: JVLCD2
Type: 3-pin Power select Header
Pin
1
Description
+12V
Pin
1
Description
VCC
2
GND
2
LCDVCC
VCC3
3
GND
3
4
GND
5
ENABKL
Connector: CN_LVDS2
Type: onboard 40-pin connector for LVDS connector
Connector model: HIROSE DF13-40DP-1.25V
Pin
2
Signal
LCDVCC
GND
Pin
1
Signal
LCDVCC
GND
4
3
6
ATX0-
ATX0+
GND
5
BTX0-
BTX0+
GND
8
7
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
9
ATX1-
ATX1+
GND
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
BTX1-
BTX1+
GND
ATX2-
ATX2+
GND
BTX2-
BTX2+
GND
ACLK-
ACLK+
GND
N/C
N/C
GND
N/C
BCLK-
BCLK+
GND
N/C
GND
LVDDCLK
LVDDDAT
N/C
N/C
N/C
N/C
Onboard Display Interface
25
3301630 User’s Manual
Hardware Setup
To setup the LCD, you need the component below:
1. A panel with LVDS interfaces.
2. An inverter for panel’s backlight power.
3. A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable, because
every panel has its own pin assignment, so we do not provide a standard cable; please find a
local cable manufacture to make cables.
LCD Installation Guide:
1. Preparing the 3301630, LCD panel and the backlight inverter.
2. Please check the datasheet of the panel to see the voltage of the panel, and set the
jumper JVLCD2 to +5V or +3.3V.
3. You would need a LVDS type cable.
Panel side
Board side
For sample illustrator only
4. To connect all of the devices well.
26
Onboard Display Interface
3301630 User’s Manual
Hardware Setup
After setup the devices well, you need to select the LCD panel type in the BIOS.
The panel type mapping is list below:
3301630 BIOS LCD Type selection form
Single channel 18bit (VER:1.0S18A)
Dual channel 18bit (VER:1.0D18A)
NO.
Output format
640 x 480
NO.
Output format
1
2
3
4
1
2
3
4
800 x 600
1024 x 768
1280 x 768
Single channel 24bit (VER:1.0S24A)
Dual channel 24bit (VER:1.0D24A)
NO.
1
Output format
1024 x 768
1280 x 768
1280 x 1024
1366 x 768
NO.
1
Output format
1024 x 768
2
2
1280 x 1024
1400 x 1050
1600 x 1200
3
3
4
4
Onboard Display Interface
27
3301630 User’s Manual
Hardware Setup
2.10.3 <HDTV Interface>
The board provides output types with Composite, S-Video and Component (YPbPr)
Composite and S-Video up to 1024 x 768 for NTSC/PAL
Component support 480p/720p/1080i/1080p mode
Connector: CN_TV
Connector type: 8-pin header TV-out connector (pitch = 2.54mm)
Pin Number
Assignment
GND
Pin Number
Assignment
S-Video/Y
GND
1
3
5
7
2
4
6
8
S-video/Pr
GND
GND
Composite/Pb
GND
Notice1: This connector is for both S-Video/Composite and YPbPr outputs; please use
attached two cables in the package for SDTV or HDTV devices.
Notice2: S-Video and Composite can not be used at the same time.
2
1
8
7
CN_TV
28
Onboard Display Interface
3301630 User’s Manual
Hardware Setup
2.11 <Integrated Audio Interface>
3301630 provides a stereo audio interface with Realtek ALC201A AC97 Codec. The
CN_AUDIO provides the interface to use attached audio cable, the CDIN can let you
connect audio output from CD-ROM drives.
1
4
CDIN
1
2
CN_AUDIO
9
10
Audio Interface
29
3301630 User’s Manual
Hardware Setup
Connector: CN_AUDIO
Type: 10-pin (2 x 5) 2.54-pitch header
Pin
1
3
Description
Line – Right
Line – Left
MIC
Pin
2
4
Description
Ground
MIC
5
6
Ground
7
N/C
8
Line Out – Left
Ground
9
Line Out – Right
10
Connector: CDIN
Type: 4-pin header
Pin
1
2
Description
CD – Left
Ground
3
Ground
4
CD – Right
30
Audio Interface
3301630 User’s Manual
Hardware Setup
2.12 <GPIO Interface>
The board provides a programmable 8-bit digital I/O interface; you can use this general
purpose I/O port for system control like POS or KIOSK.
Connector: CN_DIO
Type: 12-pin (6 x 2) 2.0mm x 2.0mm-pitch header
Pin
1
3
Description
Ground
GP10
Pin
2
4
Description
Ground
GP14
5
GP11
6
GP15
7
GP12
8
GP16
9
11
GP13
VCC
10
12
GP17
+12V
12
CN_DIO
1
Interface
31
3301630 User’s Manual
Hardware Setup
2.13 <Power Supply>
2.13.1 <Power Input>
The board requires DC 12V/5V input with onboard 4-pin connector, for the input current,
please take a reference of the power consumption report on appendix.
Connector: CN_PWR
Type: 4-pin standard power connector
Pin
1
Description
+12V
Pin
2
Description
Ground
+5V
3
Ground
4
Connector: CN_PS
Type: 3-pin ATX function connector
Pin
1
Description
5V Standby
Pin
2
Description
Ground
Pin
3
Description
Power On
1
4
CN_PWR
1
3
32
Video Memory Setup
3301630 User’s Manual
Hardware Setup
2.14 <Switch and Indicator>
The JFRNT provides front control panel of the board, such as power button, reset and
beeper, etc. Please check well before you connecting the cables on the chassis.
Connector: JFRNT
Type: onboard 14-pin (2 x 7) 2.54-pitch header
Function
IDE LED
Signal
PIN
Signal
VCC
Function
VCC
1
3
2
4
Power
LED
Active
Reset
GND
N/C
5
6
GND
VCC
N/C
Reset
7
8
N/C
9
10
12
Speaker
Power
Button
PWRBT
5VSB
11
N/C
13
14
SPKIN
14
13
2
JFRNT
1
Switch and Indicator
33
3301630 User’s Manual
Hardware Setup
Chapter 3 <System Setup>
3.1 <Video Memory Setup>
Based on Intel® 915GM chipset with GMA (Graphic Media Accelerator) 900, the board
supports Intel® DVMT (Dynamic Video Memory Technology) 3.0, which would allow the
video memory to be allocated up to 128MB.
To support DVMT, you need to install the Intel GMA 900 Driver with supported OS.
BIOS Setup:
On-Chip Video Memory Size: This option combines three items below for setup.
On-Chip Frame Buffer Size:
This item can let you select video memory which been allocated for legacy VGA and
SVGA graphics support and compatibility. The available option is 1MB and 8MB.
Fixed Memory Size:
This item can let you select a static amount of page-locked graphics memory which will
be allocated during driver initialization. Once you select the memory amount, it will be no
longer available for system memory.
DVMT Memory Size:
This item can let you select a maximum size of dynamic amount usage of video memory,
the system would configure the video memory depends on your application, this item is
strongly recommend to be selected as MAX DVMT.
34
Video Memory Setup
3301630 User’s Manual
System Setup
Fixed + DVMT Memory Size:
You can select the fixed amount and the DVMT amount at the same time for a
guaranteed video memory and additional dynamic video memory, please check the table
below for available setting.
On-Chip
Frame
Buffer Size
1MB
Fixed
Memory
Size
32MB
0MB
32MB
0
DVMT
Memory
Size
Total
Graphic
Memory
32MB
System
Memory
0MB
1MB
32MB
0MB
32MB
128MB~255MB
8MB
32MB
8MB
32MB
0MB
32MB
1MB
64MB
0
64MB
1MB
64MB
0MB
64MB
1MB
128MB
0
128MB
128MB
128MB
64MB
1MB
128MB
64MB
0MB
1MB
64MB
64MB
0
8MB
256MB~511MB
8MB
64MB
0MB
64MB
8MB
128MB
0
128MB
128MB
128MB
64MB
8MB
128MB
64MB
0
8MB
64MB
64MB
0
1MB
1MB
64MB
0
64MB
1MB
128MB
0
128MB
128MB
128MB
64MB
1MB
128MB
64MB
0
1MB
64MB
64MB
0
512MB upper
8MB
8MB
64MB
0
64MB
8MB
128MB
0
128MB
128MB
128MB
8MB
128MB
64MB
8MB
64MB
Notice:
1. The On-Chip Frame Buffer Size would be included in the Fixed Memory.
Please select the memory size according to this table.
Video Memory Setup
35
3301630 User’s Manual
System Setup
Chapter 4 <BIOS Setup>
The motherboard uses the Award BIOS for the system configuration. The Award BIOS in
the single board computer is a customized version of the industrial standard BIOS for
IBM PC AT-compatible computers. It supports Intel x86 and compatible CPU architecture
based processors and computers. The BIOS provides critical low-level support for the
system central processing, memory and I/O sub-systems.
The BIOS setup program of the single board computer let the customers modify the basic
configuration setting. The settings are stored in a dedicated battery-backed memory,
NVRAM, retains the information when the power is turned off. If the battery runs out of
the power, then the settings of BIOS will come back to the default setting.
The BIOS section of the manual is subject to change without notice and is provided here
for reference purpose only. The settings and configurations of the BIOS are current at the
time of print, and therefore they may not be exactly the same as that displayed on your
screen.
To activate CMOS Setup program, press DEL key immediately after you turn on the
system. The following message “Press DEL to enter SETUP” should appear in the lower
left hand corner of your screen. When you enter the CMOS Setup Utility, the Main Menu
will be displayed as Figure 4-1. You can use arrow keys to select your function, press
Enter key to accept the selection and enter the sub-menu.
Figure 4-1 CMOS Setup Utility Main Screen
36
BIOS Setup
3301630 User’s Manual
BIOS Setup
(This Page is Left for Blank)
BIOS Setup
37
3301630 User’s Manual
Appendix A <I/O Port Pin Assignment>
A.1 <IDE Port>
Connector: IDE
Type: 44-pin (22 x 2) box header
Pin
1
Description
Reset
D7
Pin
2
Description
Ground
D8
3
4
5
D6
6
D9
7
D5
8
D10
9
D4
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
D11
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
D3
D12
D2
D13
D1
D14
D0
D15
Ground
REQ
-IOW
-IOR
IORDY
DACK
IDEIRQ
A1
N/C
Ground
Ground
Ground
Ground
Ground
IDE32
P66DET
A2
A0
-CS1
-HD LED1
+5V
-CS3
Ground
+5V
Ground
Ground
2
1
44
43
38
IDE Port
3301630 User’s Manual
I/O Port Pin Assignment
A.2 <Serial ATA Port>
Connector: SATA1/2
Type: 7-pin wafer connector
1
2
3
4
5
6
7
GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND
2
FDD
34
33
A.3 <Floppy Port>
Connector: FDD
Type: 34-pin connector
1
Pin
1
Description
Pin
2
Description
FD DRVDEN
N/C
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
3
4
5
6
N/C
7
8
FD INDEX
FD MOA-
N/C
9
10
12
14
16
18
20
22
24
26
28
30
32
34
11
13
15
17
19
21
23
25
27
29
31
33
FD DSA-
N/C
FD DIR-
FD STEP-
FD WD-
FD WE-
FD TRAK-
FD WP-
FD RDATA-
FD HEAD-
FD DSKCHG-
SATA & Floppy Port
39
3301630 User’s Manual
I/O Port Pin Assignment
A.4 <IrDA Port>
Connector: CN_IR
Type: 5-pin header for SIR Ports
Pin
1
Description
VCC
2
N/C
1
5
3
IRRX
4
Ground
IRTX
5
40
IrDA Port
3301630 User’s Manual
I/O Port Pin Assignment
A.5 <Serial Port>
Connector: CN_COM12/CN_COM34
Type: 20-pin (10 x 2) 1.27mm x 2.54mm-pitch header
Pin
1
Description
DCD
TXD
Pin
2
Description
RXD
DTR
DSR
CTS
N/C
3
4
5
GND
RTS
6
7
8
9
RI
10
12
14
16
18
20
11
13
15
17
19
DCD
TXD
RXD
DTR
DSR
CTS
N/C
GND
RTS
RI
2
1
20
19
Serial Port
41
3301630 User’s Manual
Hardware Setup
2.4 <CPU and Memory Setup>
2.4.1 <CPU Setup>
The board comes with the socket479 for Intel Pentium M/Celeron M processors, it
supports new generation of Intel Pentium M processors with 533MHz of front side bus
and 2MB L2 cache. Please follow the instruction to install the CPU properly.
Check point
Unlock way
1. Use the flat-type
screw drive to unlock
the CPU socket
2. Follow the pin direction to install
the processor on the socket
3. Lock the socket
NOTE: {Does not support Celeron M 4xx Series processors}
Connector Location
17
3301630 User’s Manual
Flash BIOS
Appendix B <Flash BIOS>
B.1 <Flash Tool>
The board is based on Award BIOS and can be updated easily by the BIOS auto flash
tool. You can download the tool online at the address below:
File name of the tool is “awdflash.exe”, it’s the utility that can write the data into the
BIOS flash ship and update the BIOS.
B.2 <Flash BIOS Procedure>
1. Please make a bootable floppy disk.
2. Get the last .bin files you want to update and copy it into the disk.
3. Copy awardflash.exe to the disk.
4. Power on the system and flash the BIOS. (Example: C:/ awardflash XXX.bin)
5. Restart the system.
Any question about the BIOS re-flash please contact your distributors
Flash BIOS
43
Any advice or comments about our products and service, or anything we
can help you with please don’t hesitate to contact us. We will do our best to
support your products, projects and business.
Address: Global American, Inc.
17 Hampshire Drive
Hudson, NH 03051
Telephone: Toll Free (U.S. Only) 800-833-8999
(603)886-3900
FAX:
(603)886-4545
Website: http://www.globalamericaninc.com
|
Motorola MOTO EM326g User Manual
Motorola MOTOBLUR CLIQ 2 User Manual
Motorola iDEN M710 User Manual
Melissa 245 072 User Manual
LaCie Rugged User Manual
Fujitsu MHT2030AT User Manual
Capresso AD12 User Manual
Cables to Go 29345 User Manual
ARM RealView Debugger Version 16 User Manual
Apple MAC PRO 073 1349 REV A User Manual