FUNAI DP100HH8A User Manual

Owner’s Manual  
Please read before using this unit.  
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.  
DVD/CD Player  
Contents  
DP100HH8 A  
PRECAUTIONS  
Supplied Accessories  
Important Safeguards .................................................. .2  
About the Discs............................................................ .5  
Playable Discs................................................................ .5  
Unplayable Discs............................................................ .5  
remote control  
(NB094UD)  
RCA audio/video  
cables  
owner’s manual  
(1VMN24994)  
batteries (AA x2) (WPZ0102TM018/  
WPZ0102LTE01)  
STANDBY-ON  
OPEN/CLOSE  
SEARCH  
MODE  
DISPLAY  
AUDIO  
SUBTITLE  
ANGLE  
1
2
5
8
0
3
SETUP  
4
6
7
9
REPEAT  
CLEAR  
+10  
A-B  
PAUSE  
SKIP  
Owner's Manual  
Connections.................................................................. .6  
Connection to a TV......................................................... .6  
Connection to an Audio System..................................... .7  
Rear Terminals............................................................... .7  
About the Remote Control........................................... .8  
Remote Control .............................................................. .8  
Installing the Batteries for the Remote Control .............. .8  
PLA  
Y
REV  
FWD  
STOP  
OP MENU  
SETUP  
MODE  
ZOOM  
T
MENU  
ENTER  
RETURN  
Connecting to RF Modulator (Not Supplied)  
If your TV has antenna in jack only, it is still possible  
to connect this unit to your TV by using an RF  
modulator. In this case, follow the instructions below.  
DVD FUNCTIONS  
Playback........................................................................ .9  
MP3 Playback............................................................... .10  
Search Functions ........................................................ .10  
Using Track Search....................................................... .10  
Using Title / Chapter Search ......................................... .10  
Using Time Search........................................................ .10  
On-Screen Display....................................................... .11  
Repeat / Random / Programmed Playback............... .12  
Repeat Playback ........................................................... .12  
Repeat A-B Playback .................................................... .12  
Random Playback ......................................................... .12  
Programmed Playback .................................................. .12  
Special Settings........................................................... .13  
Subtitle Language.......................................................... .13  
Audio Language ............................................................ .13  
Camera Angles.............................................................. .13  
Black Level Setting........................................................ .13  
Stereo Sound Mode....................................................... .13  
Virtual Surround............................................................. .13  
DVD Setting.................................................................. .14  
LANGUAGE Setting ...................................................... .14  
DISPLAY Setting ........................................................... .15  
AUDIO Setting............................................................... .15  
PARENTAL Setting ....................................................... .16  
OTHERS Setting ........................................................... .16  
Reset to the Default Setting  
1) Disconnect the power cords of the devices from  
the AC outlet.  
2) Make the connection as illustrated below.  
3) Set your RF modulator’s channel 3/4 switch to  
either 3 or 4, whichever the TV channel is least  
used in your area. If your RF modulator has a  
modulator/antenna switch, set it according to the  
manual supplied with the RF modulator.  
4) Plug in the power cords of the devices to the AC outlet.  
5) Turn on your TV and choose the same channel  
as you set the RF modulator’s channel 3/4  
switch to. For more details, follow the manual  
supplied with the RF modulator.  
rear of this unit  
CB/PB  
Y
L
DIGITAL  
AUDIO OUT  
R
CR/PR  
VIDEO AUDIO COAXIAL  
OUT  
OUT  
S-VIDEO OMPONE
OUT VIDEO OUT  
RCA video cable  
L
R
rear of TV  
VIDEO  
OUT  
AUDIO  
OUT  
RCA audio cable  
ANT. IN  
rear of your RF  
modulator  
VHF / UHF  
antenna  
RF coaxial cable  
or  
3
4
R
L
ANT. IN CHANNEL  
AUDIO IN VIDEO IN TO TV  
RF coaxial  
cable  
cable TV  
company  
Set channel 3 or 4  
(Except for PARENTAL Setting).................................... .17  
INFORMATION  
Note:  
Troubleshooting Guide............................................... .17  
Specifications .............................................................. .18  
LIMITED WARRANTY .................................................. .18  
Español......................................................................... .19  
Quick Use Guide............................................ Back Cover  
• RF modulator is not supplied with this unit. You need to  
purchase it at your local store.  
• The quality of picture may become poor if this unit is  
connected to an RF modulator.  
If you need additional operating assistance  
after reading this owner’s manual, please call  
TOLL FREE : 1-800-317-6062  
or visit our web site at  
© 2008 Funai Electric Co., Ltd.  
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.  
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne  
correspondante de la prise et pousser jusqu’au fond.  
FCC WARNING  
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may  
cause harmful interference unless the modifications are expressly approved in the manual. The user could lose  
the authority to operate this apparatus if an unauthorized change or modification is made.  
RADIO-TV INTERFERENCE  
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference  
in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does  
cause harmful interference to radio or television reception, which can be determined by turning the apparatus off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
1) Reorient or relocate the receiving antenna.  
2) Increase the separation between the apparatus and receiver.  
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.  
4) Consult the dealer or an experienced radio/TV technician for help.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
NOTE TO CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides  
guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the  
grounding system of the building as close to the point of cable entry as practical.  
LASER SAFETY  
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service  
this apparatus, due to possible eye injury.  
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may  
result in hazardous radiation exposure.  
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.  
LOCATION: Inside, near the deck mechanism.  
IMPORTANT COPYRIGHT INFORMATION  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product  
incorporates copyright protection technology that is protected by U.S. patents and other intellectual property  
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or  
disassembly is prohibited.  
EN  
3
MAINTENANCE  
TO AVOID THE HAZARDS OF ELECTRICAL  
SHOCK AND FIRE  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it  
from an AC outlet. Grasp it by the plug.  
Servicing  
• Please refer to relevant topics on the “Troubleshooting  
Guide” on page 17 before returning the unit.  
• If this unit becomes inoperative, do not try to correct the  
problem by yourself. There are no user-serviceable parts  
inside. Turn off, unplug the power plug, and please call  
our help line mentioned on the front page to locate an  
authorized service center.  
• Do not put your fingers or objects into the unit.  
LOCATION AND HANDLING  
• Do not install the unit in direct sunlight, near strong  
magnetic fields, or in a place subject to dust or  
strong vibration.  
Cleaning the Cabinet  
• Use a soft cloth slightly moistened with a mild detergent  
solution. Do not use a solution containing alcohol, spirits,  
ammonia or abrasive.  
• Avoid a place with drastic temperature changes.  
• Install the unit in a horizontal and stable position.  
Do not place anything directly on top or bottom of  
the unit. Depending on your external devices, noise  
or disturbance of the picture and/or sound may be  
generated if the unit is placed too close to them. In  
this case, please ensure enough space between the  
external devices and the unit.  
Cleaning Discs  
• When a disc becomes dirty, clean it with a cleaning cloth.  
Wipe the disc from the center to out. Do not wipe in a  
circular motion.  
• Do not use solvents such as benzine, thinner,  
commercially available cleaners, detergent, abrasive  
cleaning agents or antistatic spray intended for analog  
records.  
• Depending on the environment, the temperature  
of this unit may increase slightly. This is not a  
malfunction.  
Cleaning the Disc Lens  
• If this unit still does not perform properly although you refer  
to the relevant sections and to “Troubleshooting Guide” in  
this owner’s manual, the laser optical pickup unit may be  
dirty. Consult your dealer or an authorized service center  
for inspection and cleaning of the laser optical pickup unit.  
TRADEMARK INFORMATION  
Manufactured under license from  
Dolby Laboratories. Dolby and the  
double-D symbol are trademarks of  
Dolby Laboratories.  
Disc Handling  
• When you handle a disc, hold it by its edge and try not to  
touch the surface of the disc.  
• Always store the disc in its protective case when not in  
use.  
Product that have earned ENERGY STAR®  
are designed to protect the environment  
through superior energy efficiency.  
is a trademark of DVD Format/Logo  
Licensing Corporation.  
DEW CONDENSATION WARNING  
• Dew condensation may form inside the unit in the  
following conditions. If so, do not use this unit at  
least for a few hours until its inside gets dry.  
- The unit is moved from a cold place to a warm  
place.  
- Under conditions of high humidity.  
- After heating a cold room.  
© 2008 Funai Electric Co., Ltd.  
All rights reserved. No part of this manual may be  
reproduced, copied, transmitted, disseminated, transcribed,  
downloaded or stored in any storage medium, in any form  
or for any purpose without the express prior written consent  
of Funai. Furthermore, any unauthorized commercial  
distribution of this manual or any revision hereto is strictly  
prohibited.  
NOTE ABOUT RECYCLING  
• This unit’s packaging materials are  
recyclable and can be reused. Please  
dispose of any materials in accordance  
with your local recycling regulations.  
• Batteries should never be thrown away or  
incinerated but disposed of in accordance with your  
local regulations concerning chemical wastes.  
Information in this document is subject to change without  
notice. Funai reserves the right to change the content  
herein without the obligation to notify any person or  
organization of such changes.  
SYMBOLS USED IN THIS MANUAL  
with the  
design is a registered trademark of  
The following symbols appear in some headings in this  
Funai Electric Co., Ltd and may not be used in any way  
without the express written consent of Funai. All other  
trademarks used herein remain the exclusive property  
of their respective owners. Nothing contained in this  
manual should be construed as granting, by implication or  
otherwise, any license or right to use any of the trademarks  
displayed herein. Misuse of any trademarks or any other  
content in this manual is strictly prohibited. Funai shall  
aggressively enforce its intellectual property rights to the  
fullest extent of the law.  
manual.  
: Description refers to DVD-video.  
: Description refers to audio CD.  
: Description refers to CD-RW/-R with MP3 files.  
EN  
4
About the Discs  
Playable Discs  
Type of  
Recorded  
signals  
Disc  
size  
Mark (logo)  
media  
Region code  
Disc types  
DVD-video  
*1, 2, 4, 6, 9  
or  
5 inches  
(12 cm)  
or  
3 inches  
(8 cm)  
DVD-RW  
DVD-R  
*1, 3, 4, 5, 6,  
7, 8, 9  
e.g.)  
title 1  
title 2  
digital video  
(MPEG2)  
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1  
chapter 2  
DVD+RW  
DVD+R  
*1, 4, 5, 6,  
8, 9  
audio CD  
MP3  
audio CD  
*4, 6, 9  
e.g.)  
digital audio  
track 1  
track 2  
track 5  
track 6  
track 3  
track 4  
5 inches  
(12 cm)  
or  
3 inches  
(8 cm)  
CD-RW  
CD-R  
*4, 5, 6, 8, 9,  
digital audio  
e.g.)  
folder 1  
folder 2  
or  
MP3  
file 1  
file 3  
file 2  
file 4  
file 1  
file 2  
is a trademark of DVD Format/Logo Licensing Corporation.  
If you cannot play back a disc which bears one of the marks above, check the following notes.  
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played  
back.  
*2: Certain DVD-video do not operate as described in this manual due to the intentions of the disc’s producers.  
*3: Discs recorded in the VR (Video Recording) format cannot be played back.  
*4: Scratched or stained discs may not be played back.  
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or  
special properties of discs.  
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them  
back. Even if they are played back, the sound or video quality will be compromised.  
*7: Only the discs recorded in the video format and finalized can be played back. Unfinalized discs cannot be played back.  
Depending on the recording status of a disc, the disc may not be played back at all. The picture or sound may not be  
smooth, etc.  
*8: If the recorded portion of the disc is too small (smaller than 2-3/16 inches (55mm) across), it may not be played back.  
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.  
Unplayable Discs  
NEVER play back the following discs as malfunction may result!  
DVD-RAM / DVD-audio / CD-i / photo CD / video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM  
for personal computers / CD-ROM for personal computers / HD DVD / Blu-ray Disc  
On the following disc, the sound MAY NOT be heard.  
super audio CD  
Any other discs without compatibility indications  
Note:  
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio  
CD layer cannot be delivered.  
EN  
5
SETUP  
Connections  
Connection to a TV  
Method 1  
Method 2  
Method 3  
TV  
analog audio  
standard picture  
good picture  
better picture  
COMPONENT  
VIDEO IN  
COMPONENT  
VIDEO IN  
AUDIO IN  
Y
Y
VIDEO IN  
S-VIDEO IN  
R
L
C
B
R
P
B
R
or  
C
P
and  
or  
or  
RCA video  
cable  
S-video cable  
component  
video cable  
RCA audio  
cable  
This unit  
L
Y
CB/PB  
C
B/PB  
Y
L
L
DIGITAL  
DIGITAL  
AUDIO OUT  
AUDIO OUT  
R
R
R
C
R/PR  
VIDEO  
OUT  
AUDIO COAXIAL  
OUT  
S-VIDEO COMPONENT  
OUT VIDEO OUT  
VIDEO  
OUT  
C
R/PR  
AUDIO COAXIAL  
OUT  
AUDIO  
OUT  
COMPONENT  
VIDEO OUT  
S-VIDEO  
OUT  
VIDEO  
OUT  
AUDIO OUT  
VIDEO OUT  
S-VIDEO OUT  
COMPONENT VIDEO OUT  
Supplied cables used in this connection are as follows:  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your local store.  
Note:  
• Connect this unit directly to the TV. If RCA audio/video cables are connected to a VCR, pictures may be distorted  
due to the copy protection system.  
If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture;  
You must select the connection Method 3 above and progressive scanning mode. To set the mode, set “PROGRESSIVE”  
to “ON” in “DISPLAY” menu, so that the P-SCAN indicator on the front panel lights up. Refer to pages 14-15 for more  
details.  
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or  
not be output at all.  
If your TV is not compatible with progressive scanning;  
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding  
[PLAY B] on the front of the unit for more than 5 seconds, so that the P-SCAN indicator on the front panel turns off.  
After connecting to your TV:  
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.  
Please refer to your TV’s manual for details.  
INPUT MODES FOR COMMON TV BRANDS  
Listed below are inputs for common brand name TV’s.  
Admiral:  
Curtis Mathis:  
GE:  
Hitachi:  
JVC:  
AUX  
Panasonic:  
RCA:  
Samsung:  
Sanyo:  
Sharp:  
TV/VIDEO  
INPUT, TV/VCR, 00, 90, 91, 92, 93  
TV/VIDEO  
VIDEO  
LINE1, LINE2, 00, 90, 91, 92, 93  
INPUT, TV/VCR, 00, 90, 91, 92, 93  
INPUT, AUX  
VIDEO, VIDEO1, VIDEO2, VIDEO3  
00  
Kenwood:  
LXI-Series:  
Magnavox:  
AUX  
00  
AUX CHANNEL  
Sony:  
Toshiba:  
Zenith:  
VIDEO1, VIDEO2, VIDEO3  
TV/GAME  
00  
EN  
6
Connection to an Audio System  
Analog Audio Connection  
Digital Audio Connection  
stereo system  
Audio  
Dolby Digital decoder,  
MD deck or DAT deck  
COAXIAL  
analog audio  
input jacks  
digital audio  
input jack  
L
R
digital audio  
coaxial cable  
DIGITAL  
AUDIO OUT  
RCA audio cable  
DIGITAL  
COAXIAL  
AUDIO OUT  
This unit  
SETUP > AUDIO>  
DOLBY DIGITAL  
Setting  
Connection  
L
Connecting to a Dolby Digital decoder  
for Dolby Digital audio output.  
AUDIO OUT  
BITSTREAM  
PCM  
R
AUDIO  
OUT  
Connecting to the other device  
(an MD deck or DAT deck etc.)  
without Dolby Digital decoder.  
* To complete these settings, refer to pages 14-15.  
Note:  
• The audio source on a disc in a Dolby Digital  
multi-channel surround format cannot be recorded as  
digital sound by an MD or DAT deck.  
• By hooking this unit up to a Dolby Digital decoder, you  
can enjoy high-quality Dolby Digital multi-channel  
surround sound as heard in the movie theaters.  
• Playing back a DVD using incorrect settings may  
generate noise distortion and may also damage the  
speakers.  
Supplied cables used in this connection are as  
follows:  
• RCA audio cable (L/R) x 1  
Please purchase the rest of the necessary cables  
at your local store.  
Rear Terminals  
1
2
4
5
Y
C
B/PB  
L
DIGITAL  
AUDIO OUT  
R
C
R/PR  
VIDEO  
OUT  
AUDIO COAXIAL  
OUT  
S-VIDEO COMPONENT  
OUT VIDEO OUT  
3
1
S-VIDEO OUT jack  
Connect an optional S-video cable here through the S-video in jack of a television.  
2
3
4
5
COMPONENT VIDEO OUT jacks  
Connect optional component video cable here through the component video in jacks of a television.  
VIDEO OUT jack  
Connect a yellow video cable here through the video in jack of a television.  
AUDIO OUT jacks  
Connect an audio cable here through the audio in jacks of a television or other audio device.  
DIGITAL AUDIO OUT COAXIAL jack  
Connect a digital audio coaxial cable here through the digital audio coaxial in jack of a decoder or audio receiver.  
Note:  
Please purchase the necessary cables at your local store. (Refer to pages 6-7.)  
EN  
7
About the Remote Control  
Media  
Remote Control  
Button  
(Alphabetical order)  
1
4
7
2
5
8
0
3
6
• To select track directly. (CD)  
• To select folder/file directly.  
(MP3)  
• To select chapter or title  
directly.  
OPEN/CLOSE  
STANDBY-ON  
SEARCH  
MODE  
9
DISPLAY  
+10  
AUDIO  
SUBTITLE  
ANGLE  
REPEAT  
1
4
2
5
8
0
3
6
ENTER  
• To move the cursor and deter- • To move the cursor and deter-  
mine its position.  
mine its position.  
7
9
CLEAR  
+10  
A-B  
• To repeat between your cho-  
sen point of A and B.  
• To repeat between your cho-  
sen point of A and B.  
-
A
B
SKIP  
PAUSE  
ANGLE  
AUDIO  
• To select camera angles on  
a disc.  
PLAY  
------  
REV  
FWD  
STOP  
TOP MENU  
• To select audio language on  
a disc.  
• To select “STEREO”, “L-ch” or  
“R-ch”. (CD)  
SETUP  
MODE  
ZOOM  
MENU  
ENTER  
• To remove status number in  
program input.  
• To remove status number in  
program input.  
RETURN  
CLEAR  
• To clear the numbers entered • To clear the numbers entered  
incorrectly.  
incorrectly.  
• To cancel the point for A-B  
repeat.  
• To cancel the point for A-B  
repeat.  
DISPLAY  
• To display the current disc  
mode.  
• To display the current disc  
mode.  
• To search forward/backward  
through a disc.  
• To begin slow forward play-  
back in the pause mode.  
• To search forward/backward  
through a disc.  
REV  
FWD  
Installing the Batteries for the  
Remote Control  
MENU  
MODE  
• To call up the menu on a disc.  
------  
• To arrange the playing order  
or play randomly.  
• To set black level on/off.  
• To set virtual surround on/off.  
• To arrange the playing order  
or play randomly.  
• To set virtual surround on/off.  
Install batteries (AA x2) matching the  
polarity indicated inside battery com-  
partment of the remote control.  
OPEN/CLOSE  
PAUSE  
• To open or close the disc tray. • To open or close the disc tray.  
1
2
3
• To turn on the unit.  
• To turn on the unit.  
• To pause disc playback.  
• To advance playback one  
frame at a time.  
• To pause disc playback.  
• To begin disc playback.  
• To turn on the unit.  
• To begin disc playback.  
• To turn on the unit.  
PLAY  
Keep in mind the following when using  
the remote control:  
• To play back a track or disc  
repeatedly. (CD)  
• To play back a file, folder or  
disc repeatedly. (MP3)  
• Make sure that there are no obstacles  
between the remote control and the  
remote sensor on the unit.  
• The maximum operable ranges from  
the unit are as follows.  
REPEAT  
• To play back a chapter or title  
repeatedly.  
RETURN  
• To return to the previous  
operation in menu.  
• To return to the previous  
operation in menu.  
-Line of sight:  
SEARCH  
MODE  
• To search tracks.  
• To search chapter, title or  
time.  
approx. 23 feet (7m)  
• To search time. (CD)  
• To search folders. (MP3)  
-Either side of the center:  
approx. 16 feet (5m) within 30°  
-Above: approx. 16 feet (5m) within 15°  
-Below: approx. 10 feet (3m) within 30°  
P-SCAN  
SETUP  
SKIP  
• To call up the setup menu.  
• To skip chapters or titles.  
• To call up the setup menu.  
• To skip tracks. (CD)  
• To skip folders or files. (MP3)  
OPEN/CLOSE PLA  
Y
STOP POWER  
STANDBY-ON  
• To turn the unit on/off.  
• To turn the unit on/off.  
STOP  
• To stop playback.  
• To stop playback.  
SUBTITLE  
Note:  
• To select subtitles on a disc.  
------  
------  
• Do not mix alkaline and manganese  
batteries.  
TOP MENU  
ZOOM  
• To call up the top menu on  
a disc.  
• Do not mix old and new batteries.  
• Always remove batteries from  
remote control if they are dead or if  
the remote control is not to be used  
for an extended period of time. This  
will prevent battery acid from leaking  
into the battery compartment.  
• To magnify part of a picture.  
(2x / 3x / 4x / 1/2x)  
------  
EN  
8
DVD FUNCTIONS  
Please note : most instructions in this manual refer to remote control use.  
Playback  
Before:  
Lights up when power is on.  
Turn on the TV, amplifier and any other  
devices which are connected to this unit.  
Make sure the TV and audio receiver are  
set to the correct channel.  
P-SCAN  
OPEN/CLOSE PLAY STOP POWER  
2
2
2 3 4 1  
2
1
STANDBY-ON  
OPEN/CLOSE  
SEARCH  
DISPLAY  
MODE  
on page 10  
Note:  
(
)
• When you play back a CD-RW/-R with MP3  
files, details on page 10.  
AUDIO  
SUBTITLE  
ANGLE  
REPEAT  
1
4
2
5
8
0
3
6
Press [STANDBY-ON] to turn on  
this unit.  
1
• A “ ” may appear at the top-right on the TV  
screen when the operation is prohibited by the  
disc or this unit.  
7
9
CLEAR  
Press [OPEN / CLOSE A] and  
insert a disc with label facing up.  
2
+10  
• Some DVD may start playback from title 2 or 3 due to  
specific programs.  
-
A
B
SKIP  
PAUSE  
• During the playback of a 2-layered disc, pictures may  
stop for a moment. This happens while the 1st layer is  
being switched to the 2nd layer. This is not a malfunction.  
• You can change the on-screen language in “PLAYER  
MENU” setting. (Refer to page 14.)  
3
4
Press [PLAY B] to start playback.  
3
4
PLAY  
REV  
FWD  
STOP  
Press [STOP C] to stop playback.  
Disc Menu  
Fast Forward / Reverse Search  
Some discs contain menus which allow you to customize  
DVD playback. Use [K / L / s / B] to select an item, then  
press [ENTER] (or [PLAY B]).  
Use [FWD g] or [REV h] repeatedly  
during playback to select the required  
E
1
forward or reverse speed.  
To continue playback, press [PLAY B].  
Calling Up a Menu Screen during Playback  
Note:  
• Fast forward or reverse search speed is different  
depending on the disc. Approximate speed is 1(2x), 2(4x),  
3(8x), 4(16x) and 5(32x).  
• Press [MENU] to call up the disc menu.  
• Press [TOP MENU] to call up the title menu.  
Slow Forward Search  
Note:  
• Menu operations may vary depending on the disc. Refer  
to the manual accompanying the disc for more details.  
Press [FWD g] repeatedly in the pause  
mode to select the required forward speed.  
Resume Playback  
1
To continue playback, press [PLAY B].  
Press [STOP C] during playback. Resume icon  
Note:  
will appear at the top-left on the TV screen.  
• Slow forward speed is different depending on the disc.  
Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and  
5(1/2).  
R.STOP  
Press [PLAY B], playback will resume from  
the point at which playback was stopped.  
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if  
pictures in the slow playback mode are blurred. (Refer to  
pages 14-15.)  
• The reverse of slow playback is not available.  
Zoom  
Note:  
To cancel resume, press [STOP C] one more time in the  
stop mode.  
For MP3, playback will resume from where you stopped (if  
the power has been turned off, the playback will start from  
the beginning of the track).  
The resume playback information stays on even when the  
power is turned off, as long as the disc stays in the unit.  
1) Press [ZOOM] repeatedly during playback to select the  
required zoom factor: 2x, 3x, 4x, 1/2x or off.  
x2  
x3  
x4  
x1/2  
Paused and Step-by-Step Playback  
Press [PAUSE F] during playback.  
To continue playback, press [PLAY B].  
PAUSE  
2) Use [K / L / s / B] to slide the zoomed picture across  
the screen.  
3) To exit zoom function, press [ZOOM] repeatedly to select  
OFF.  
The disc goes forward by one frame each time [PAUSE F]  
is pressed in the pause mode.  
To continue playback, press [PLAY B].  
Note:  
Zooming function does not work while the disc menu is  
displayed.  
Note:  
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if  
pictures in the pause mode are blurred. (Refer to pages  
14-15.)  
• Some part of the picture may not be zoomed depending  
on the disc or playback status.  
EN  
9
MP3 Playback  
MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the  
computer and play back the files on this unit.  
Note:  
• Some selections may take a while to  
be recognized.  
• Folders are known as groups; files are  
known as tracks.  
Insert a CD-RW/-R with MP3 files, then the file list will automatically appear on the TV  
screen.  
3
• MP3 files are accompanied by  
• Folders are accompanied by  
• Refer to “On-Screen Display” on  
page 11 for more details.  
icon.  
icon.  
1
Select the desired folder from the list  
on the left side in the file list.  
2 Select the desired file from the list on  
the right side in the file list.  
• If you record data over 20 times, it may  
not be played back correctly.  
This unit recommends the files recorded  
under the following circumstances:  
• Sampling frequency: 44.1kHz or 48kHz.  
• Constant bit rate: 32kbps ~ 320kbps.  
004/027  
001/013  
file name1  
00:00:36  
OFF  
001/027  
001/007  
00:00:12  
OFF  
ENTER  
ENTER  
file name11  
3
3
3
3
3
3
3
3
3
1. folder1  
2. folder2  
3. folder3  
4. folder4  
5. folder5  
6. folder6  
7. folder7  
8. folder8  
1. file name1  
1. folder1  
2. folder2  
3. folder3  
4. folder4  
5. folder5  
6. folder6  
7. folder7  
8. folder8  
1. file name11  
2. file name12  
3
3
3
3
3
3
2. file name2  
3. file name3  
4. file name4  
5. file name5  
6. file name6  
7. file name7  
8. file name8  
3. file name13  
4. file name14  
5. file name15  
6. file name16  
7. file name17  
3 Refer to “Resume Playback” on  
ENTER  
ENTER  
page 9.  
or  
or  
PLAY  
PLAY  
Press [ENTER]  
or [PLAY B] .  
STOP  
Search Functions  
Using Track Search  
Using Title / Chapter Search  
Using Time Search  
Using [SEARCH MODE]  
1
OFF  
Using [SEARCH MODE]  
1
1
PLAY  
03/24  
001/002  
--:  
--  
:
--  
OFF  
--/26  
00:00:19  
OFF  
SEARCH  
MODE  
SEARCH  
MODE  
--/24  
001/002  
00:00:30  
SEARCH  
MODE  
e.g.) DVD  
e.g.) CD  
or  
Press cursor [B]  
2 Enter the desired track number  
ENTER  
to highlight  
.
within 5 seconds.  
ENTER  
1
4
7
2
5
8
0
3
CD: once  
DVD: twice  
--/26  
00:00:19  
OFF  
6
Press [SEARCH MODE] once for  
the title search.  
9
+10  
For the chapter search, press  
2 Enter the desired time within 5  
cursor [B] to highlight  
.
ENTER  
3 Press [ENTER].  
seconds.  
1
4
7
2
5
8
0
3
6
9
2 Enter the desired title or chapter  
03/24  
001/002  
--  
:
--  
:
--  
OFF  
• To play back a double-digit track, press  
the track number directly (e.g. for track  
14, press [1], [4] and [ENTER]).  
• To play back a triple-digit track, press  
the track number directly for MP3.  
(e.g. for track 114, press [1], [1], [4]  
and [ENTER]).  
number within 5 seconds.  
1
4
7
2
5
8
0
3
e.g.) DVD  
6
03/24  
---/002  
00:00:32  
OFF  
9
+10  
ENTER  
3 Press [ENTER].  
ENTER  
3 Press [ENTER].  
Note:  
Using [SKIP H , G]  
• To play time 0:15:00, press [1], [5],  
[0], [0] of [the Number buttons].  
• Press [CLEAR] to erase the  
incorrect input at step 2.  
Using [SKIP H , G]  
1
PLAY  
Current Track  
1
• For DVD and audio CD, time search  
is not available for programmed or  
random playback.  
TR 1 TR 2 TR 3 TR 4  
SKIP  
PLAY  
Current Chapter  
SKIP  
SKIP  
CH 1 CH 2 CH 3 CH 4  
SKIP SKIP  
SKIP  
Note:  
• For audio CD, track search is not  
available for programmed or random  
playback.  
Note:  
• Depending on the disc being played  
back, this function can also be performed  
by directly entering the desired chapter  
number with [the Number buttons].  
Refer to the manual accompanying the  
disc.  
• For DVD, title/chapter search is not avail-  
able for programmed or random playback.  
EN  
10  
On-Screen Display  
You can check the information about the current disc by pressing [DISPLAY] on the remote control.  
T(Title):  
current title number / total  
titles  
TR(Track):  
current track number /  
total tracks  
elapsed time of the  
current title  
current repeat setting  
03/24  
001/002  
00:00:40  
OFF  
01/26  
00:00:11  
OFF  
1
1
2
current repeat setting  
elapsed time of the cur-  
rent track  
DISPLAY  
DISPLAY  
C(Chapter):  
current chapter number /  
total chapters  
CH(Chapter):  
current chapter number /  
total chapters  
TR(Track):  
current track number /  
total tracks  
remaining time of the  
current chapter  
remaining time of the  
current track  
001/002 00:00:19 - 00:01:11  
NORMAL  
01/26  
00:00:12 - 00:03:20  
NORMAL  
2
3
current play mode setting  
current play mode setting  
DISPLAY  
DISPLAY  
elapsed time of the cur-  
rent track  
elapsed time of the  
current chapter  
TT(Title):  
current title number / total  
titles  
remaining time of the  
current title  
ALL:  
current track number / total  
tracks  
remaining time of the  
entire disc  
3
4
03/24  
00:00:20 - 00:01:09  
NORMAL  
01/26  
00:00:14 - 01:11:28  
NORMAL  
current play mode setting  
elapsed time of entire disc  
current play mode setting  
DISPLAY  
DISPLAY  
elapsed time of the  
current title  
4
Note:  
current folder number /  
total folders  
current file number / total  
files in the current folder  
Some DVD will not allow you to set chapter playback  
correctly.  
elapsed time of the  
current file  
current repeat setting  
004/027  
001/013  
00:00:36  
OFF  
1
file name1  
3
1. folder1  
2.
1. file name1  
2. file name2  
ie
DISPLAY  
TR(Track):  
current file number / total  
files in the current folder  
elapsed time of the  
current file  
remaining time of the  
current file  
current play mode setting  
001/013 00:00:43 - 00:03:36  
NORMAL  
2
3
file name1  
3
1. folder1  
2.
1. file name1  
2. file name2  
3
DISPLAY  
file name1  
3
3
1. folder1  
2. fo
1. file name1  
2. file name2  
EN  
11  
Repeat / Random / Programmed Playback  
Repeat Playback  
Repeat A-B Playback  
Programmed Playback  
Repeat function is available only during  
playback.  
You may determine the order in which  
chapters or tracks will play back.  
1
PLAY  
1
1 Press [MODE] once during stop  
A-  
mode.  
PLAY  
A-B  
CHAPTER  
MODE  
NORMAL  
RANDOM  
PROGRAM  
REPEAT  
at your desired starting point (A)  
e.g.) DVD  
• During playback, press [MODE].  
2
Each time you press [REPEAT], repeat  
function changes as example below.  
CD/MP3: twice  
A-B  
A-B  
DVD:  
three times  
2 Select “PROGRAM”.  
Then press [ENTER].  
at your desired ending point (B)  
• Point B should be in the same title  
or track as point A.  
(repeat off)  
OFF  
ENTER  
ENTER  
(current chapter repeat)  
(current title repeat)  
CHAPTER  
TITLE  
Note:  
• To exit the sequence, press [A-B]  
DVD-PROGRAM  
MAX:  
2
so that “OFF” appears.  
To cancel point A, press [CLEAR] at  
step 1.  
Total:  
3
TITLE CHAPTER PLAY ALL CLEAR  
1
4
7
2
5
8
0
3
6
02 007  
05 005  
01 002  
-- --- -- --- -- ---  
-- --- -- --- -- ---  
-- --- -- --- -- ---  
• This function does not work in the  
other repeat modes.  
9
(repeat off)  
OFF  
-- --- -- --- -- --- -- ---  
-- --- -- --- -- --- -- ---  
+10  
TRACK  
ALL  
(current track repeat)  
(entire disc repeat)  
Random Playback  
e.g.) DVD  
• Up to 20 chapters or tracks can  
be ordered.  
• Enter the desired number with  
[the Number buttons].  
DVD: title and chapter number  
CD: track number  
This function shuffles the playing  
order of chapters or tracks instead  
of playback in the sequence.  
(repeat off)  
OFF  
1 Press [MODE] once during stop  
MP3: folder and file number  
mode.  
(current file repeat)  
(current folder repeat)  
(entire disc repeat)  
TRACK  
GROUP  
ALL  
3 Select “PLAY”,  
MODE  
NORMAL  
RANDOM  
PROGRAM  
then press [ENTER].  
ENTER  
• During playback, press [MODE].  
CD/MP3: twice  
DVD:  
Note:  
three times  
Note:  
•To erase all program at once, select  
“ALL CLEAR’’ and press [ENTER] or  
press [CLEAR] at step 2.  
• Repeat setting (except “ALL”) will  
be cleared when moving to another  
title, chapter, track/file or folder.  
• This function is not available with  
some discs or during repeat A-B  
playback.  
2 Select “RANDOM”.  
Then press [ENTER].  
•If the title, chapter, track number is  
incorrect, the programmed number  
you entered will be skipped during  
programmed playback.  
ENTER  
ENTER  
•While a program is being played back,  
[STOP C] works as follows;  
Press [STOP C] and [PLAY B] next,  
so that the programmed playback  
restarts.  
Random playback will start.  
Press [STOP C] twice and [PLAY B]  
next, so that playback restarts from  
the first track in the original order.  
However, your programmed playback  
can be restarted when you follow the  
above steps. (Your programs are still  
stored until either the disc is removed  
or power is turned off.)  
Note:  
• During random playback, you cannot  
go back to the previous track, using  
[SKIP G] allows you to search  
chapters or tracks randomly.  
• During DVD random playback, you  
can play back chapters in the cur-  
rent title randomly.  
•Some DVD will not allow you to set  
programmed playback.  
• Some DVD will not allow you to set  
random playback.  
•During programmed playback, you  
cannot setup “  
GROUP’’ (MP3).  
TITLE’’ (DVD), “  
EN  
12  
Special Settings  
Subtitle Language  
Each time you press [AUDIO], audio  
language changes as example below.  
Stereo Sound Mode  
ENG (English audio)  
This unit allows you to select a subtitle  
language (if available) during DVD  
playback.  
This unit allows you to select a sound  
mode during CD playback.  
SPA  
FRE  
(Spanish audio)  
(French audio)  
1
PLAY  
1
STEREO  
PLAY  
1. ENG/6  
AUDIO  
Note:  
SUBTITLE  
Some discs will only allow you to change the  
audio setting from the disc menu. Refer to the  
manual accompanying the discs for details.  
If your language is not shown after pressing  
[AUDIO] several times, the disc may not have  
that language. However, some discs allow  
audio language setting on the disc menu.  
(Operation varies depending on the disc, so  
refer to the manual along with the disc.)  
Each time you press [AUDIO], sound  
Each time you press [SUBTITLE],  
subtitle language changes as example  
below.  
mode changes as example below.  
STEREO (right and left channels  
are active)  
OFF  
ENG (English subtitles)  
FRE (French subtitles)  
(no subtitles)  
L-ch  
R-ch  
(left channel is active)  
(right channel is active)  
Camera Angles  
Virtual Surround  
Some DVD may contain  
scenes which have been  
shot simultaneously from  
various angles. You can  
change the camera angle if  
appears on the screen. If the “ANGLE  
ICON” setting is “OFF” in “OTHERS”  
You can enjoy stereophonic virtual world  
on your existing 2 channel stereo system.  
To set subtitle ON/OFF  
1
PLAY  
1
PLAY  
1. ENG/6  
OFF  
menu,  
pages 14-16.)  
will not appear. (Refer to  
SUBTITLE  
MODE  
1
PLAY  
2
Press twice.  
OFF  
ENTER  
1/8  
(once for CD and MP3)  
ANGLE  
2 Using [s / B], you can select the  
desired sound mode.  
Note:  
• If your language is not shown after  
pressing [SUBTITLE] several times,  
the disc may not have that language.  
However, some discs allow subtitle  
language setting on the disc menu.  
(Operation varies depending on the  
disc, so refer to the manual along with  
the disc.)  
Each time you press [ANGLE], camera  
ENTER  
ROCK  
angle changes.  
Black Level Setting  
3D: sound mode suitable for setting  
stereophonic audio.  
When “ ” appears on the TV screen,  
it means no subtitle is recorded on the  
scene.  
JAZZ: sound mode suitable for jazz  
Adjust the black level to make the dark  
areas of the TV picture brighter.  
music  
ROCK: sound mode suitable for rock music  
POP: sound mode suitable for pop music  
Some discs will only allow you to change  
the subtitle from the disc menu. Refer to  
the manual accompanying the discs for  
details.  
1
CLASSIC: sound mode suitable for  
PLAY  
classic music  
ON  
OFF: no effects (original sound)  
Audio Language  
MODE  
3
RETURN  
This unit allows you to select an audio  
language (if multiple languages are  
available on disc) during DVD playback.  
2
OFF  
ENTER  
Note:  
• Virtual surround is available only  
when the DVD player is connected  
to a TV or stereo using the red and  
white AUDIO OUT jacks on the DVD  
player. Also, select the “SETUP”  
menu to use Dolby Digital  
1
PLAY  
ON: makes the dark areas brighter.  
OFF: shows the original picture as recorded.  
1. ENG Dolby D 5.1ch 48k/3  
3
RETURN  
AUDIO  
connection (COAXIAL), and setting in  
PCM mode.  
EN  
13  
DVD Setting  
You can change the settings of the unit.  
1 Press [SETUP].  
2 Select the desired item.  
SETUP  
ENTER  
ENTER  
<SETUP MENU>  
LANGUAGE  
LANGUAGE  
AUDIO  
AUDIO  
SUBTITLE  
DISC MENU  
PLAYER MENU  
SUBTITLE  
DISC MENU  
PLAYER MENU  
LANGUAGE menu  
DISPLAY menu  
AUDIO menu  
PARENTAL menu  
OTHERS menu  
INITIALIZE menu  
LANGUAGE_AUDIO  
DISPLAY_TV ASPECT  
AUDIO_DRC  
PARENTAL_PASSWORD  
OTHERS_ANGLE ICON  
INITIALIZE_INITIALIZE  
AUDIO  
ORIGINAL  
ENGLISH  
FRENCH  
SPANISH  
GERMAN  
ITALIAN  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
4:3 PAN & SCAN  
16:9 WIDE  
DRC  
DOWN SAMPLING  
DOLBY DIGITAL  
ON  
OFF  
PASSWORD  
NO  
YES  
ANGLE ICON  
AUTO POWER OFF  
ON  
OFF  
INITIALIZE  
YES  
SUBTITLE  
DISC MENU  
PLAYER MENU  
SWEDISH  
OTHERS  
page 14  
A
page 15  
B
page 15  
C
page 16  
D
page 16  
E
page 17  
F
LANGUAGE Setting  
A
Follow steps 1 to 2 above.  
3 Select the desired item.  
4 Select the desired language.  
5 To exit the menu  
ENTER  
SETUP  
ENTER  
ENTER  
ENTER  
Note:  
1  
LANGUAGE menu  
LANGUAGE_AUDIO  
• Language options are not  
available with some discs.  
AUDIO: 1 2  
AUDIO  
SUBTITLE  
DISC MENU  
PLAYER MENU  
ORIGINAL  
ENGLISH  
FRENCH  
SPANISH  
GERMAN  
ITALIAN  
(Default: ORIGINAL)  
• If “OTHERS” is selected in the  
“AUDIO”, “SUBTITLE” or “DISC  
MENU” screen, select the de-  
sired language using  
Sets the audio  
language.  
LANGUAGE_AUDIO  
AUDIO  
ORIGINAL  
ENGLISH  
FRENCH  
SPANISH  
GERMAN  
ITALIAN  
SUBTITLE  
DISC MENU  
PLAYER MENU  
SWEDISH  
OTHERS  
LANGUAGE_SUBTITLE  
SUBTITLE: 1 2  
(Default: OFF)  
Sets the subtitle  
language.  
[K / L / s / B]. Press [ENTER].  
LANGUAGE_AUDIO  
SWEDISH  
OTHERS  
AUDIO  
OFF  
SUBTITLE  
DISC MENU  
PLAYER MENU  
ENGLISH  
FRENCH  
SPANISH  
GERMAN  
ITALIAN  
SWEDISH  
OTHERS  
DUTCH  
RUSSIAN  
KOREAN  
CHINESE  
DANISH  
JAPANESE  
FINNISH  
ROMANIAN  
IRISH  
NORWEGIAN  
TURKISH  
ICELANDIC  
GREEK  
PORTUGUESE POLISH  
HUNGARIAN  
LANGUAGE_DISC MENU  
CZECH  
DISC MENU: 1  
(Default: ENGLISH)  
Sets the language in  
DVD menu.  
AUDIO  
ENGLISH  
FRENCH  
SPANISH  
GERMAN  
ITALIAN  
SWEDISH  
DUTCH  
SUBTITLE  
DISC MENU  
PLAYER MENU  
• Only the languages supported  
by the disc can be selected.  
2  
OTHERS  
• “LANGUAGE” setting for  
“AUDIO” and “SUBTITLE” are  
not available with some discs.  
Then press [AUDIO] and  
[SUBTITLE]. Details are on  
page 13.  
LANGUAGE_PLAYER MENU  
PLAYER MENU  
AUDIO  
ENGLISH  
FRANÇAIS  
(Default: ENGLISH)  
Sets the language for  
the on-screen display.  
SUBTITLE  
DISC MENU  
PLAYER MENU  
ESPAÑOL  
EN  
14  
DISPLAY Setting  
B
You can change the display functions. Follow steps 1 to 2 on page 14.  
3 Select the desired item.  
4
5 To exit  
TV ASPECT: (Default: 4:3 LETTER BOX)  
“TV ASPECT”  
See note on the left.  
DISPLAY_TV ASPECT  
Select the  
desired  
or “STILL  
MODE” menu  
ENTER  
ENTER  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
4:3 PAN & SCAN  
16:9 WIDE  
4:3 LETTER BOX  
4:3 PAN & SCAN  
16:9 WIDE  
setting.  
SETUP  
ENTER  
ENTER  
DISPLAY menu  
To complete  
“PROGRESSIVE”  
setting  
STILL MODE: (Default: AUTO)  
See note on the left.  
DISPLAY_STILL MODE  
Select the  
desired  
DISPLAY_TV ASPECT  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
4:3 PAN & SCAN  
16:9 WIDE  
setting.  
ENTER  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
AUTO  
FIELD  
FRAME  
AUTO  
FIELD  
FRAME  
ENTER  
ENTER  
ENTER  
Note:  
PROGRESSIVE: (Default: OFF)  
Select  
“ON”.  
See note on the right.  
TV ASPECT:  
DISPLAY_PROGRESSIVE  
• Select “4:3 LETTER BOX”, so that  
black bars may appear on the top and  
bottom of the screen.  
SETUP  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
OFF  
ON  
OFF  
ON  
ENTER  
Note:  
PROGRESSIVE:  
• Select “4:3 PAN & SCAN” for a full  
ENTER  
height picture with both sides adjusted.  
• You can set  
• Select “16:9 WIDE” if a wide-screen TV  
is connected to this unit.  
STILL MODE:  
• Select “AUTO” usually.  
• If you select “AUTO”, it automatically  
selects the best resolution setting  
(“FRAME” or “FIELD”) based on the  
data characteristics of the pictures.  
(default)  
“PROGRESSIVE” to  
“OFF” in “DISPLAY”  
menu or press and  
hold [PLAY B] on the  
front of the unit for  
more than 5 seconds  
during playback, so  
that the P- SCAN  
indicator on the front  
panel turns off.  
Select  
Before proceeding…  
“Yes”.  
1. Make sure your TV has progressive scan.  
2. Connect with component video cable  
NOTE: If there is no picture or picture is  
distorted after selecting ‘YES’,  
wait about 15 seconds for auto recovery.  
ENTER  
If there is no  
picture or you  
do not press  
any buttons for  
15 seconds,  
“PROGRESSIVE”  
will switch to  
“OFF” and it will  
exit the “SETUP”  
menu.  
Activate Progressive?  
NO  
YES  
SELECT:  
K
/
L
SET:ENTER  
• If you select “FIELD”, the picture in the  
ENTER  
still mode will be stabilized.  
• If you select “FRAME”, the picture in  
the still mode will be highly defined.  
• An individual picture on TV screen is  
called a “frame”, which consists of two  
separate images called as “field”.  
• Some pictures may be blurred if you  
select “AUTO” in the still mode due to  
their date characteristics.  
When “PROGRESSIVE”  
is “ON”, video signals  
from the unit’s VIDEO  
OUT and S-VIDEO OUT  
jacks will be distorted or  
not be output at all.  
Select  
“Yes”.  
Confirm again to use progressive scan.  
If Picture is good, select ‘YES’.  
ENTER  
NO  
YES  
SET:ENTER  
SELECT:  
K
/
L
AUDIO Setting  
C
Choose the appropriate audio settings for your device. It only affects during the playback of DVD. Follow steps 1 to 2 on  
page 14.  
3 Select the desired item.  
4
5 To exit the menu  
DRC (Dynamic Range Control): (Default: ON)  
Set to “ON” to compress the range between soft and loud sounds.  
SETUP  
ENTER  
Select the  
AUDIO_DRC  
desired  
setting.  
ENTER  
DRC  
DOWN SAMPLING  
DOLBY DIGITAL  
ON  
OFF  
ON  
OFF  
Note:  
ENTER  
ENTER  
DRC:  
AUDIO menu  
• This function is  
available only on the  
discs which are re-  
corded in the Dolby  
Digital format.  
AUDIO_DRC  
DOWN SAMPLING: (Default: ON)  
DRC  
DOWN SAMPLING  
DOLBY DIGITAL  
ON  
OFF  
Set to “ON” when outputting in 48kHz.  
Set to “OFF” when outputting the original sound.  
DOWN SAMPLING:  
• When playing back  
disc with copyright  
protection, the sound  
will be down sampled  
at 48kHz, even if you  
set to “OFF”.  
Select the  
desired  
setting.  
AUDIO_DOWN SAMPLING  
ENTER  
DRC  
ON  
OFF  
ON  
OFF  
DOWN SAMPLING  
DOLBY DIGITAL  
ENTER  
ENTER  
DOLBY DIGITAL: (Default: BITSTREAM)  
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.  
• BITSTREAM: outputs a Dolby Digital signals.  
• PCM: convert the Dolby Digital into PCM (2 channel).  
AUDIO_DOLBY DIGITAL  
Select the  
desired  
DRC  
DOWN SAMPLING  
DOLBY DIGITAL  
BITSTREAM  
PCM  
BITSTREAM  
PCM  
ENTER  
setting.  
ENTER  
ENTER  
EN  
15  
PARENTAL Setting  
D
Parental control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)  
This feature prevents your children from viewing inappropriate materials.  
Parental Levels  
Parental level allows you to set the rating levels of your DVD. Playback will stop if the ratings exceed the levels you set.  
Follow steps 1 to 2 on page 14.  
3 Press [ENTER],  
4 Enter your desired  
5 Select “LEVEL”.  
6 Select the desired  
level, and press  
[ENTER].  
ENTER  
ENTER  
ENTER  
and then select “YES”.  
4-digit password.  
ENTER  
1
4
7
2
5
8
0
3
6
9
ENTER  
ENTER  
ENTER  
If the password has not been  
set yet.  
PARENTAL menu  
PASSWORD  
NO  
YES  
PASSWORD  
LEVEL  
CHANGE  
PASSWORD  
LEVEL  
CHANGE  
Enter password  
- - - -  
8 [ADULT]  
PARENTAL_PASSWORD  
PASSWORD  
NO  
YES  
TIPS FOR LEVELS  
Enter a new  
password again.  
• 8 [ADULT]:  
DVD software of any grades (adult/  
general/children) can be played back.  
no one under 17 admitted  
restricted; under 17 requires  
accompanying parent or adult guardian  
parental guidance recommended  
unsuitable for children under 13  
parental guidance suggested  
general audience  
If the password has been  
set already, enter the current  
4-digit password.  
• 7 [NC-17]:  
• 6 [R]:  
PASSWORD  
NO  
YES  
Re-enter password  
- - - -  
PARENTAL menu  
• 5 [PGR]:  
• 4 [PG13]:  
• 3 [PG]:  
• 2 [G]:  
PARENTAL_CHANGE  
PASSWORD  
LEVEL  
CHANGE  
• 1 [KID SAFE]: suitable for children  
Enter password  
- - - -  
7 To exit the menu  
If you do not need  
parental lock, choose  
“NO”. Press [ENTER].  
SETUP  
Note:  
• For DVD, the resume information will be cleared if you change the  
parental level when the resume information is on.  
To Change the Password for Parental Controls  
You can change your password for parental controls. Follow steps 1 to 2 on page 14.  
ENTER  
ENTER  
6 Select “CHANGE” at step  
7 Enter your desired  
8
Enter your new 4-  
digit password again.  
9 To exit the menu  
5 above.  
4-digit password.  
SETUP  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
PARENTAL menu  
Note:  
• Record the password in  
case you forget it.  
PARENTAL_CHANGE  
PASSWORD  
LEVEL  
CHANGE  
If you forget the password,  
press [4], [7], [3], [7] at step  
3 above, then enter your new  
password. Password will be  
cleared and parental levels  
will be set to “8 [ADULT]”.  
PASSWORD  
LEVEL  
PASSWORD  
LEVEL  
CHANGE  
CHANGE  
Enter new password  
- - - -  
Re-enter password  
- - - -  
OTHERS Setting  
E
You can change the other functions. Follow steps 1 to 2 on page 14.  
3 Select the desired item.  
4
5 To exit the menu  
(Default: ON)  
ANGLE ICON:  
SETUP  
Set to “ON” to display  
when  
Select the  
desired  
ENTER  
multiple camera angles are available  
during DVD playback.  
setting.  
ENTER  
ANGLE ICON  
ON  
ON  
AUTO POWER OFF  
OFF  
OFF  
ENTER  
ENTER  
OTHERS menu  
(Default: ON)  
AUTO POWER OFF:  
OTHERS_ANGLE ICON  
Select the  
desired  
Set to “ON” to turn this unit off  
automatically after 30 minutes of no  
use.  
ANGLE ICON  
AUTO POWER OFF  
ON  
OFF  
setting.  
ENTER  
ANGLE ICON  
ON  
ON  
AUTO POWER OFF  
OFF  
OFF  
ENTER  
ENTER  
EN  
16  
Reset to the Default Setting (Except for PARENTAL Setting)  
F
1 Press [SETUP].  
2 Select “INITIALIZE”.  
3 Select the desired  
PLAYER MENU  
Note:  
• When you do not  
wish to initialize,  
press [SETUP] to  
exit the menu at  
step 2.  
SETUP  
Language, using [the  
Number buttons].  
ENTER  
STOP  
ENTER  
<SETUP MENU>  
Press  
twice.  
SELECT MENU LANGUAGE  
LANGUAGE  
INITIALIZE_INITIALIZE  
1
2
3
ENGLISH  
FRENCH  
SPANISH  
AUDIO  
INITIALIZE  
YES  
SUBTITLE  
DISC MENU  
PLAYER MENU  
INFORMATION  
Troubleshooting Guide  
If the unit does not perform properly when operated as instructed in this owner’s manual, refer to the following.  
Problem  
No power  
Corrective action  
–Check if the AC power cord is properly connected.  
–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.  
–Check if the TV is switched on.  
–Check the video connection.  
No sound or picture  
Distorted picture  
–Check the audio/video cable connections to the TV.  
(Refer to page 6.)  
–Sometimes a small amount of picture distortion may appear.  
This is not a malfunction.  
–Connect the unit directly to the TV.  
–Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive  
scan and you are using the component video connections between the unit and the TV. Disable  
progressive scan for all other connections. (Refer to page 6.)  
Completely distorted picture or  
black/white picture with DVD  
–Connect this unit directly to the TV.  
–Make sure the disc is compatible with the unit.  
–Adjust the volume.  
No sound or distorted sound  
No audio at digital output  
No DTS audio is output.  
–Check that the speakers are connected correctly.  
–Check the digital connections.  
–Check if the audio format of the selected audio language matches your receiver capabilities.  
–This unit does not support DTS audio.  
This is not a malfunction.  
Picture freezes momentarily during  
playback.  
–Check the disc for fingerprints/dirty and clean with a soft cloth wiping from center to edge.  
–Clean the disc.  
–Ensure the disc is inserted in correct direction.  
–Check if the disc is defective by trying another disc.  
–Cancel the parental lock or change the control level.  
–Insert a correct disc that plays back on this unit.  
Disc cannot be played back.  
Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.  
No return to start-up screen when  
disc is removed.  
–Reset the unit by switching off the unit, then on again.  
–Aim the remote control directly at the sensor on the front panel.  
–Reduce the distance to the unit.  
–Replace the batteries in the remote control.  
–Re-insert the batteries with their polarities (+/– signs) as indicated.  
–Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn up the  
volume. If you hear some signal sound from the radio by pressing buttons on the remote control,  
the remote control is working.  
–Press and hold any button on remote control toward a digital camera. The remote control is  
working if you confirm infrared light through the digital camera.  
The unit does not respond to  
the remote control.  
Buttons do not work or the unit stops  
responding.  
The unit does not respond to some  
operating commands during playback.  
–To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.  
–Operations may not be permitted by the disc. Refer to the instructions of the disc.  
–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for  
repair.  
The unit cannot read CD / DVD.  
Angle does not switch.  
–The angle cannot be switched for DVD which do not contain multiple angles. In some cases  
multiple angles are only recorded for specific scenes.  
Playback does not start  
when the title is selected.  
–Check the “PARENTAL” setting.  
The password for rating level  
has been forgotten.  
–Enter the default password “4737”, then your forgotten password will be cleared.  
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s  
manual for more details on correct operations.  
• Playback from a desired track and random playback are not available during programmed playback.  
• Some functions are prohibited on some discs.  
EN  
17  
Specifications  
• Designs and specifications are subject  
to change without notice.  
• If there is a discrepancy between  
languages, the default language will be  
English.  
Output signal format :  
NTSC color  
Power source :  
120V AC +/- 10%, 60Hz +/- 0.5%  
Power consumption :  
10W (standby : 0.9W)  
Operating temperature :  
41°F (5°C) to 104°F (40°C)  
Dimensions :  
W : 8.3”  
H : 2.0”  
D : 9.7”  
Weight :  
(210mm)  
(50mm)  
(245mm)  
Approx 1.8lbs. (0.8kg)  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in  
ABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE  
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,  
AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI,  
ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF  
MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PUR-  
POSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REP-  
RESENTATIVES IN THE UNITED STATES. ALL WARRANTY  
INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN  
AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID  
WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERV-  
ICE CENTER.  
the event of defect in materials or workmanship as follows:  
DURATION:  
PARTS: FUNAI CORP. will provide parts to replace defective  
parts without charge for one (1) year from the date of  
original retail purchase. Certain parts are excluded from  
this warranty.  
LABOR: FUNAI CORP. will provide the labor without charge for a  
period of ninety (90) days from the date of original retail  
purchase.  
IMPORTANT:  
LIMITS AND EXCLUSIONS:  
This warranty is extended only to the original retail purchaser. A  
purchase receipt or other proof of original retail purchase will be  
required together with the product to obtain service under this war-  
ranty.  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM  
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY  
PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH  
THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI  
CORP.  
This warranty shall not be extended to any other person or trans-  
feree.  
ATTENTION:  
This warranty is void and of no effect if any serial numbers on  
the product are altered, replaced, defaced, missing or if service  
was attempted by an unauthorized service center. This limited war-  
ranty does not apply to any product not purchased and used in the  
United States.  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY  
DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.  
WARRANTY STATEMENT REGARDING NON AUTHORIZED  
REPAIRS:  
This product is produced for home use and this warranty only covers  
failures due to defects in material or workmanship which occurs dur-  
ing normal use. It does not cover damage which occurs in shipment,  
or failures which are caused by repairs, alterations or product not  
supplied by FUNAI CORP., or damage which results from accident,  
misuse, abuse, mishandling, misapplication, alteration, faulty instal-  
lation, improper maintenance, commercial use such as hotel, rental  
or office use of this product or damage which results from fire, flood,  
lightning or other acts of God.  
To obtain warranty service, you must take the product, or  
deliver the product freight prepaid, in either its original packag-  
ing or packaging affording an equal degree of protection, to any  
AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reim-  
burse you for any service done by unauthorized service providers  
without prior written approval.  
To locate your nearest AUTHORIZED SERVICE CENTER or for  
general service inquiries, please contact us at:  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS,  
ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY  
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO  
OR FLOOR MODELS.FUNAI CORP. AND ITS REPRESENTA-  
TIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY  
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARIS-  
ING OUT OF OR OCCASIONED BY THE USE OF OR THE IN-  
FUNAI CORPORATION  
Customer Service  
Tel :1-800-317-6062  
19900 Van Ness Avenue, Torrance, CA 90501  
EN  
18  
Español  
Conexiones  
Reproducción  
1
4
Antes.  
Si su televisor tiene entradas de  
AUDIO/VIDEO vea la sección  
“Connection to a TV” en la página 6 en  
el manual de manejo. En caso  
contrario, vea la sección “Connecting  
to RF Modulator (Not Supplied)” en  
la página del frente en el manual de  
manejo.  
¡Encienda el televisor,  
amplificador y otros equipos  
conectados a esta unidad.  
Asegúrese  
1 Para abrir o  
cerrar la bandeja  
del disco  
2 Ponga un disco  
con la etiqueta  
hacia arriba.  
STANDBY-ON  
OPEN/CLOSE  
que el  
SEARCH  
OPEN/CLOSE  
STANDBY-ON  
DISPLAY  
MODE  
1
1
4
televisor y el  
sintonizador  
de audio  
AUDIO  
SUBTITLE  
ANGLE  
REPEAT  
A-B  
1
4
2
5
8
0
3
6
7
9
CLEAR  
3 Para empezar la 4 Para parar la  
están en el  
canal  
correcto.  
+10  
PAUSE  
SKIP  
reproducción  
reproducción  
PLAY  
STOP  
3
REV  
FWD  
Instalación de las pilas en  
el control remoto  
PLAY  
STOP  
2
Control remoto  
5
1
2
3
Disco  
(Orden alfabético)  
Botón  
1
4
7
2
5
8
0
3
6
Para seleccionar directamente la canción.  
(CD)  
Para seleccionar directamente el grupo/  
canción. (MP3)  
• Para seleccionar directamente el capítulo  
o título.  
9
+10  
Para cambiar el idioma en  
la pantalla  
3
ENTER  
Para mover el cursor y determinar la  
posición.  
Para mover el cursor y determinar la  
posición.  
1 Confirme que ha seleccionado  
“LANGUAGE”.  
A-B  
Para repetir entre su punto A y B  
seleccionado.  
Para repetir entre su punto A y B  
seleccionado.  
SETUP  
STANDBY-ON  
ANGLE  
AUDIO  
STOP  
Para seleccionar los ángulos de la  
cámara en un disco.  
------  
Para seleccionar idiomas de audio en un  
disco.  
Para seleccionar “ESTÉREO”, “L-ch” o  
“R-ch”. (CD)  
LANGUAGE  
Para eliminar el Nº de estado en la  
entrada de programa.  
Para borrar los números mal entrados.  
Para borrar el punto para la repetición  
A-B.  
Para eliminar el Nº de estado en la  
entrada de programa.  
Para borrar los números mal entrados.  
Para borrar el punto para la repetición  
A-B.  
AUDIO  
CLEAR  
SUBTITLE  
DISC MENU  
PLAYER MENU  
DISPLAY  
Para mostrar el modo de disco actual.  
Para mostrar el modo de disco actual.  
ENTER  
Para buscar en avance/retroceso por un disco.  
Para buscar en avance/retroceso por un  
disco.  
REV  
FWD  
Para empezar la reproducción en avance  
lento durante el modo de pausa.  
2 Seleccione “PLAYER MENU”.  
MENU  
MODE  
Para llamar el menú en un disco.  
------  
Para disponer el orden de reproducción o Para disponer el orden de reproducción o  
la reproducción aleatoria. la reproducción aleatoria.  
Para activar/desactivar el nivel del negro. Para activar/desactivar el ambiental  
ENTER  
LANGUAGE_PLAYER MENU  
Para activar/desactivar el ambiental virtual.  
virtual.  
AUDIO  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
SUBTITLE  
DISC MENU  
PLAYER MENU  
OPEN/CLOSE  
PAUSE  
Para abrir o cerrar la bandeja del disco.  
Para encender la unidad.  
Para abrir o cerrar la bandeja del disco.  
Para encender la unidad.  
Para hacer una pausa en la reproducción. Para hacer una pausa en la reproducción  
Para avanzar la reproducción un cuadro cada vez.  
del disco.  
ENTER  
Para empezar la reproducción del disco.  
Para empezar la reproducción del disco.  
Para encender la unidad.  
PLAY  
Para encender la unidad.  
Para reproducir repetidamente una  
canción o disco. (CD)  
Para reproducir repetidamente una  
cansión, grupo o disco. (MP3)  
3 Seleccione el idioma deseado para  
REPEAT  
Para reproducir repetidamente un  
capítulo o título.  
las indicaciones en la pantalla.  
RETURN  
LANGUAGE_PLAYER MENU  
Para volver a la operación anterior en el  
menú.  
Para volver a la operación anterior en el  
menú.  
AUDIO  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
ENTER  
SUBTITLE  
DISC MENU  
PLAYER MENU  
SEARCH  
MODE  
Para buscar una canción.  
Para buscar el tiempo. (CD)  
Para buscar los grupos. (MP3)  
Para buscar un capítulo, título o tiempo.  
SETUP  
SKIP  
Para llamar el menú de ajustes de DVD.  
Para llamar el menú de ajustes de DVD.  
ENTER  
SETUP  
Para saltar canciones. (CD)  
Para saltar los grupos o canciones. (MP3)  
• Para saltar capítulos o titulo.  
STANDBY-ON  
4 Para salir del menú  
Para encender o apagar la unidad.  
Para encender o apagar la unidad.  
STOP  
• Para parar la reproducción.  
Para parar la reproducción.  
------  
SUBTITLE  
Para seleccionar subtítulos en un disco.  
TOP MENU  
ZOOM  
Para llamar el menú inicial en un disco.  
------  
------  
Para ampliar la imagen de vídeo en DVD.  
(2x / 3x / 4x / 1/2x)  
ES  
19  
Quick Use Guide  
Connections  
Playback  
1
4
Before:  
If your TV has AUDIO/VIDEO input  
jacks, see the section “Connection to a  
TV” on page 6 of the owner’s manual.  
If not, see the section “Connecting to  
RF Modulator (Not Supplied)” on the  
front page of the owner’s manual.  
Turn on the TV, amplifier  
and any other devices which  
are connected to this unit.  
Make sure the  
1 To open the disc 2 Insert a disc with  
tray  
label facing up.  
TV and audio  
receiver are set 1  
to the correct  
channel.  
STANDBY-ON  
OPEN/CLOSE  
SEARCH  
OPEN/CLOSE  
DISPLAY  
MODE  
STANDBY-ON  
1
4
AUDIO  
SUBTITLE  
ANGLE  
REPEAT  
A-B  
1
4
2
5
8
0
3
6
7
9
Installing the Batteries for  
the Remote Control  
CLEAR  
2
+10  
3 To start playback 4 To stop playback  
PAUSE  
SKIP  
PLAY  
STOP  
3
REV  
FWD  
PLAY  
STOP  
1
2
3
Remote Control  
5
Media  
Button  
(Alphabetical order)  
1
4
7
2
5
8
0
3
6
To Change the  
On-Screen Language  
3
• To select track directly. (CD)  
• To select folder/file directly. (MP3)  
• To select chapter or title directly.  
9
+10  
1 Confirm that “LANGUAGE” is selected.  
ENTER  
• To move the cursor and determine its  
position.  
• To move the cursor and determine its  
position.  
SETUP  
STANDBY-ON  
STOP  
A-B  
• To repeat between your chosen point of  
A and B.  
• To repeat between your chosen point of  
A and B.  
ANGLE  
AUDIO  
LANGUAGE  
• To select camera angles on a disc.  
• To select audio language on a disc.  
------  
AUDIO  
SUBTITLE  
DISC MENU  
PLAYER MENU  
• To select “STEREO”, “L-ch” or “R-ch”.  
(CD)  
• To remove status number in program  
input.  
• To remove status number in program  
input.  
CLEAR  
• To clear the numbers entered incorrectly. • To clear the numbers entered incorrectly.  
ENTER  
• To cancel the point for A-B repeat.  
To cancel the point for A-B repeat.  
DISPLAY  
• To display the current disc mode.  
• To display the current disc mode.  
• To search forward/backward through  
a disc.  
• To begin slow forward playback in the  
pause mode.  
2 Select “PLAYER MENU”.  
• To search forward/backward through  
a disc.  
REV  
FWD  
MENU  
MODE  
ENTER  
• To call up the menu on a disc.  
------  
LANGUAGE_PLAYER MENU  
AUDIO  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
SUBTITLE  
DISC MENU  
PLAYER MENU  
• To arrange the playing order or play  
randomly.  
• To set black level on/off.  
• To set virtual surround on/off.  
To arrange the playing order or play  
randomly.  
• To set virtual surround on/off.  
OPEN/CLOSE  
PAUSE  
• To open or close the disc tray.  
• To turn on the unit.  
• To open or close the disc tray.  
• To turn on the unit.  
ENTER  
• To pause disc playback.  
• To pause disc playback.  
To advance playback one frame at a time.  
• To begin disc playback.  
• To turn on the unit.  
• To begin disc playback.  
• To turn on the unit.  
• To play back a track or disc repeatedly.  
(CD)  
• To play back a file, folder or disc  
repeatedly. (MP3)  
3 Select the desired language for the  
PLAY  
on-screen language.  
REPEAT  
• To play back a chapter or title repeatedly.  
LANGUAGE_PLAYER MENU  
ENTER  
AUDIO  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
SUBTITLE  
DISC MENU  
PLAYER MENU  
RETURN  
• To return to the previous operation in  
menu.  
• To return to the previous operation in  
menu.  
SEARCH  
MODE  
• To search tracks.  
• To search time. (CD)  
• To search folders. (MP3)  
• To search chapter, title or time.  
ENTER  
SETUP  
SKIP  
• To call up the setup menu.  
• To skip chapters or titles.  
• To call up the setup menu.  
• To skip tracks. (CD)  
• To skip folders or files. (MP3)  
4 To exit the menu  
SETUP  
STANDBY-ON  
• To turn the unit on/off.  
• To turn the unit on/off.  
STOP  
• To stop playback.  
• To stop playback.  
------  
SUBTITLE  
• To select subtitles on a disc.  
TOP MENU  
ZOOM  
• To call up the top menu on a disc.  
------  
------  
• To magnify part of a picture.  
(2x / 3x / 4x / 1/2x)  
Printed in China  
E6KPTUD  
1VMN24994 ★★★★★  

National Instruments 6218 User Manual
Maxtor DiamondMax 6800 User Manual
LaCie 2big triple User Manual
Insignia NS C2000 User Manual
GE PDW9200 User Manual
Dell PowerVault AMP01 User Manual
Continental Electric CE23679 User Manual
Bloomfield 2074FR User Manual
BenQ M555C User Manual
Audiovox SP85 User Manual