Ericsson R250s PRO User Manual

User’s Guide

Mobile Phone

R250s PRO

QUICK START

This page helps you to get the phone up and running quickly. If you have not

used a mobile phone before, we recommend that you read the chapter

“Preparing Your Phone for Use” on page 4, for a more detailed installation

procedure.

•

Wash the phone gently in cold water under a water tap.

Do not immerse the phone in water!

R250S PRO FEATURES

•

The R250s PRO is a mobile phone, specially designed to be used when

working outdoors. Thanks to its rugged design the R250s PRO is very

resistant to external influences such as dust, rain and shock.

The R250s PRO is the first mobile phone which supports GSM Pro. GSM

Pro is an extended feature of the GSM network, which supports group

calls and call monitoring. (GSM Pro requires a GSM Pro subscription.)

The R250s PRO has an vibrating call alert, which means that the phone

vibrates when you receive an incoming call or message. This is a useful

function when you are working in a noisy environment, where you

cannot hear the phone signal.

•

When you work in a noisy environment, you can use Ericsson handsfree

equipment in combination with ear protection equipment. At an incoming

group call, the call is answered automatically and you will hear the conver-

sation in the earpiece.

Key pad lock. The key pad lock prevents accidental dialling, which could

happen if you keep your phone attached to your belt. The key pad remains

locked until you receive an incoming call. While the key pad is locked,

you can still use the Push-To-Talk button on the left side of the phone for

entering the phone book.

•

Alert button. The R250s PRO is equipped with an alert button on the top

of the phone, which makes it easy to call a pre-set alert number.

Note! Please read the chapter “Guidelines for Safe and Efficient Use” on

page 112, before using your mobile phone.

Contents

at a Glance

Getting Started 3

Preparing Your Phone for Use 4

Turning Your Phone

On and Off 14

Display Information and Key Functions 17

Making and Receiving Calls 19

During a Call 24

Speakerphone 26

Functions and Settings 29

Using the Menu System 30

Your Personal Phone Book 33

Keeping Track of Your Phone Calls 42

Your Voice Mail Service 44

Personalizing Your Phone 46

Sending and Receiving Text Messages (SMS) 53

Diverting Incoming Calls 62

Security for Your Phone and Subscription 64

Setting Network Preferences 70

Handling More than One Call Simultaneously 74

Knowing the Call Time/Call Cost 78

Using Two Phone Lines 81

Calling Card or Credit Card Calls 83

Sending and Receiving Fax and Data calls 85

Some Useful Tools 86

GSM Pro 89

GSM Pro 90

Ericsson R250s PRO

Third edition (June 2000)

This manual is published by Ericsson

Mobile Communications AB, without any

warranty. Improvements and changes to

this manual necessitated by typographical

errors, inaccuracies of current information,

or improvements to programs and/or equip-

ment, may be made by Ericsson Mobile

Communications AB at any time and with-

out notice. Such changes will, however, be

incorporated into new editions of this

manual.

©Ericsson Mobile Communications AB,

1999

Publication number: EN/LZT 108 2554 R1C

Printed in Sweden

Additional Information 97

Accessories 98

Troubleshooting 102

Ericsson Mobile Internet 104

Quick Keys 105

Technical Data 106

Glossary 107

Guidelines for Safe and Efficient Use 112

Warranty 116

INNOVATRON PATENTS

Declaration of Conformity 118

Index 119

Please note!

Some of the services in this manual are not supported by all net-

works. This also applies to the GSM International Emergency

Number 112.

Please contact your network operator or service provider if you are

in doubt whether you can use a particular service or not.

The

symbol on our products signifies that they have been certi-

fied according to the EMC directive 89/336/EEC, the Telecommu-

nications directive 91/263/EEC, and the Low Voltage directive 73/

23/EEC when applicable. The products fulfil the requirements

according to the following standards:

Cellular Phones and Accessories in Combination:

ETS 300 342-1 EMC for European digital cellular telecommunica-

tions.

Accessories Without Direct Connection to a Cellular Phone:

EN 50081 Electromagnetic compatibility, Generic Emission Stan-

dard, and EN 50082 Electromagnetic compatibility, Generic

Immunity Standard.

GETTING STARTED

Preparing Your Phone for Use

Turning Your Phone On and Off 14

Display Information and Key Functions 17

Making and Receiving Calls 19

During a Call 24

Speakerphone 26

Preparing Your Phone

for Use

Note! Please read the chapter “Guidelines for Safe and Efficient Use” on

page 112, before using your mobile phone.

OVERVIEW

Front

Antenna

Alert button

Indicator light

Mode switch

Volume keys

Earpiece/loud-

speaker

Display

Push-to-talk

button*

On/off key

Keypad

Microphone

* If you are not using a SIM Pro card (see “GSM Pro” on page 90), i.e. if

you are using a regular SIM card, pressing the Push-to-talk button mutes

the microphone, if pressed during a conversation.

Preparing Your Phone for Use

Top

Earpiece/Loud-

speaker

Alert Button

Indicator Light

Back

Battery release

Connector for

catch

external antenna

Hole for belt clip

Battery

Charging

connector

Headset

connector

ASSEMBLY

To use your phone you must:

•

insert the SIM card

attach the battery to the phone

charge the battery

Please see the following pages.

Preparing Your Phone for Use

THE SIM CARD

When you register as a subscriber with a network operator, you get a SIM

(Subscriber Identity Module) card. The SIM card contains a computer chip

that keeps track of your phone number, the services included in your subscrip-

tion, and your Phone Book information, among other things.

SIM cards come in two sizes. One is the size of a credit card, and the other is

smaller. Your phone uses the smaller card. Many credit card-sized SIM cards

have a perforated smaller card that you can take out easily. Before you can use

your phone, you must insert the SIM card as shown below.

Inserting the SIM Card

To insert the SIM card, remove the battery (if attached) and follow these steps:

1. Open the lid that covers the SIM

card holder.

3. Open the holder.

2. Release the SIM card holder by

sliding it in the direction of the

arrow.

4. Slide the SIM card into the

holder. Make certain that the cut

corner is in the top right-hand

corner.

5. Lock the holder by pressing it

down and sliding it in the direc-

tion of the arrow in the picture.

6. Finally, close the lid.

Preparing Your Phone for Use

The PIN

Most SIM cards are supplied with a security code or PIN (Personal Identity

Number), which you need to access the network. Every time you turn on your

phone, it prompts you to enter your PIN. You will find your PIN in the infor-

mation from your operator.

Enter

You may need your PIN when you want to change the settings in your phone.

Furthermore, some operators may have services that require a second PIN,

your PIN2.

You should be careful with your PIN, since it is your protection against

unauthorized use of your subscription.

If your PIN is entered incorrectly three times in a row, the SIM card is

blocked. If this happens, you can unlock it by using your PUK (Personal

Unblocking Key code), which you also get from your operator.

THE BATTERY

The R250s PRO comes with a nickel metal hydride (NiMH) battery. The

battery is not charged when you buy your phone, but there may be enough

power to turn the phone on. We recommend that you charge the battery before

you use the phone for the first time.

The battery is specially designed for the R250s PRO. The battery has a special

locking mechanism that prevents it from falling off if you should drop the

phone on the ground.

The battery is equipped with a special rubber sealing to prevent leakage into

the phone. With the battery and antenna properly attached, the phone is dust-

and water-resistant. The phone can be used outdoors, even if it is raining and

the phone will not be damaged if you use it in a dusty environment.

Use only Ericsson original batteries. By using other batteries you risk damag-

ing the phone and will void the warranty.

Preparing Your Phone for Use

Attaching the Battery

1. Attach the battery to the bottom

2. Press the upper part of the battery

against the phone until you hear

two clicks.

part of the phone.

When to Charge the Battery

The nickel metal hydride battery that comes with your phone can be charged

whenever you wish without affecting its performance. This is not the case

with the cheaper nickel cadmium type batteries, often sold as accessories by

other suppliers. For the best talk and standby time in the long run, we recom-

mend that you use only Ericsson original batteries with your phone.

Note! If you charge a new battery, or a battery that has not been used for a

long time, it may take a while until you get an indication of charging.

To remind you that you will soon need to charge the battery or replace it with

a charged one:

•

an alarm signal (a long beep) sounds and the message Battery low appears

for ten seconds in the display. The signal is repeated several times.

the indicator light on top of the phone starts flashing red.

•

Note! The phone turns itself off when the battery can no longer power it

satisfactorily.

Preparing Your Phone for Use

Charging the Battery

1. Make sure that the battery is

attached to the phone.

2. Connect the charger to the mains.

3. Connect the other end of the

cable to the phone as shown in

the picture. The flash symbol on

the plug must face upwards.

To indicate charging:

•

the battery meter in the display pulses continuously.

the indicator on top of the phone shows a steady red light (or green, if the

phone is turned on).

When the battery is fully charged, the battery meter in the display is full and

the indicator on top of the phone shows a steady green light.

Tip! You can use the phone while the battery is being charged. However, this

increases the charging time.

You can also connect the charger to the desk/wall stand that comes in your

box. Just place the phone in the desk/wall stand when you need to charge the

phone. See “Desk/Wall Stand” on page 99 for more information.

Disconnecting the Charger

•

Push the plug connected to the phone upwards and pull it out.

Attach the rubber protector to the system connector.

Preparing Your Phone for Use

Removing the Battery

1. Turn off the phone.

3. Lift the battery up and away from

2. Press the battery release catch on

the top of the battery.

the phone.

Switching Antennas

The R250s PRO comes with two antennas. The longer antenna gives you bet-

ter receiving signalling when you are within an area with poor radio coverage.

Please make sure that you switch antennas during dry conditions, to prevent

leakage into the phone.

1. Pull out the rubber plug from the

external antenna connector.

2. Screw the antenna anti-clockwise

to remove it.

3. Attach the new antenna, screwing

it clockwise until it is properly

attached.

4. Insert the rubber plug into the

external antenna connector.

Note! Do not use any antennas designed for other type of telephone. The

antenna is specially designed for the R250s PRO. With the antenna (and bat-

tery) properly attached the phone is water resistant. Using other antennas will

void the warranty.

Preparing Your Phone for Use

The Clips

The R250s PRO comes with two different clips:

•

standard clip

swivel clip.

The standard clip is a metal belt clip which is attached to the battery with a

screw.

The swivel clip is a belt holder which has a knob and a belt holder. The knob

is attached to the battery with a screw. The knob is round to allow the phone to

rotate in the holder. To prevent the phone from falling out of the clip, you need

to press a button to release the phone.

Attaching the Swivel Clip

1. Attach the knob to the battery.

2. Slide the phone downwards until

it locks.

3. To release the phone from the

belt holder: press and hold the

release button and pull the phone

upwards.

Preparing Your Phone for Use

SYSTEM CONNECTOR BOOT

The system connector boot prevents connected accessories, e.g. a handsfree

set from falling out. When you use a portable handsfree and the phone is

attached to your belt, the handsfree will not fall out if you bend forward or sit

down.

The system connector boot also works as protection for the phone’s system

connector. With the system connector boot attached, you can charge the phone

outdoors, even if it is raining, or in a dusty environment without damaging the

phone’s system connector.

System Connector boot

1. Insert the handsfree plug or the

charger plug (or both) as shown in

the picture above. The flash and the

headset symbol must face upwards.

2. Pull the insert part of the system con-

nector boot through the system con-

nector boot and attach it to the

phone’s system connector, as shown

in the picture to the right.

3. Pull the system connector boot over

the insert part and the phone, until it

is properly attached.

4. To release the System connector boot

from the phone, push it upwards and

pull it out.

Preparing Your Phone for Use

TAKING CARE OF YOUR MOBILE PHONE

When needed, the phone can be washed under running water. We recommend

that you do it gently in cold water under a water tap. Before washing the

phone, it is important that the battery is properly connected, the antenna is

properly screwed on and that all accessories are removed.

Washing the Phone

•

Wash the phone gently in cold water under a water tap.

Do not immerse the phone in water!

Note! When washing your phone, do not direct the jet of water towards the

buzzer or the microphone.

Buzzer

Microphone

Preparing Your Phone for Use

Turning Your Phone

On and Off

TURNING YOUR PHONE ON

•

Press and hold the NO key until you hear a click.

If Enter PIN Appears in Display

Enter

Some SIM cards are protected with a PIN code. If Enter PIN appears in the

display after you have turned on the phone:

1. Enter your PIN. If you make a mistake while entering your PIN, erase the

wrong digit by pressing the CLR key.

Enter

****

2. Press # or YES to confirm your PIN code.

Note! If your PIN is entered incorrectly three times in a row, the SIM card is

blocked. You can unblock it by using your PUK code, which is supplied by

your operator. See “Security for Your Phone and Subscription” on page 64.

Searching

13:40

Network Search

After you have turned on the phone (and entered your PIN), the Ericsson

name appears in the display and the phone searches for a network.

NETWORK

13:40

When a network has been found, the phone beeps three times. The indicator

light on the top of the phone flashes green once every second and your net-

work operator’s name (in most cases abbreviated) appears in the display.

This is called standby mode. You can now make and receive calls.

IF NO NETWORK IS DISPLAYED

Normally, the name of a network appears in the display after you have turned

your phone on, but sometimes there is no network within range that you can

use. The display then shows one of the following:

Searching

If the message Searching remains in the display, you are within range of a

network, but you are not allowed to use it. However, in an emergency, some

operators allow you to call the international emergency number 112. See

“Making and Receiving Calls” on page 19.

Searching

13:40

Turning Your Phone On and Off

No Network

No network

13:40

If the message No network is displayed, there is no network within range or

the received signal is too weak. You have to move to get a stronger signal. You

can also try to replace the antenna with the longer high gain antenna.

INITIAL SETTINGS

The first time you turn on your phone, you may want to change the language

in the display, set the clock and choose the ring signal type. For more informa-

tion about these settings, see “Personalizing Your Phone” on page 46.

Display Language

Most modern SIM cards automatically set the display language to the lan-

guage of the country where you bought your SIM card. If this is not the case,

the default language is English.

If your phone displays a language that you do not understand, you can change

it to English at any time. For more information on how to change the display

language, see “Display Language” on page 46.

To change the language to English

1. Press the CLR key.

2. Press the LEFT arrow key.

3. Enter 0000.

4. Press the RIGHT arrow key.

For information about the keys, please see “Key Functions” on page 18.

Setting the Time

The time is shown at the bottom of the display. When you buy your phone, the

time is not normally set.

Clock

To set the time

1. Press the LEFT or RIGHT arrow key until the Clock menu appears.

2. Press YES to enter the clock menu.

CLOCK

Set Clock

(14:16)

3. Press the RIGHT arrow key until Set clock appears.

4. Press YES to enter the Set clock function.

5. Enter the correct time in hours and minutes, using the number keys.

6. Press YES to confirm your choice.

SET CLOCK

(14:16)

_ –: – –

7. Press CLR to return to standby mode.

Note! The time is by default presented in the 24-hour format. If you prefer the

12-hour format, you can change the setting.

Turning Your Phone On and Off

Setting the Ring Signal Level

1. Press the RIGHT arrow key.

The text Ring level and a bar representing the ring signal level appears in the

display.

Ring level

(QQQQQqq)

2. Press YES to enter the Ring level menu.

The text Buzzer appears in the display.

RING LEVEL

Buzzer

(QQQQQqq)

3. Press YES to enter the Buzzer menu.

4. Use the RIGHT and LEFT arrow keys to set the ring signal level.

•

Pressing the RIGHT key increases the volume.

Pressing the LEFT key decreases the volume.

The phone rings once with the actual setting as you increase the

volume, except for the “Off” and “Step” setting.

5. Press YES to save your setting.

6. Press CLR to return to standby mode.

TURNING YOUR PHONE OFF

•

In standby mode, press and hold the NO key until you hear a click.

Turning Your Phone On and Off

Display Information

and Key Functions

DISPLAY INFORMATION

Your phone display helps you to:

•

make sure that you are dialling correctly

check your signal strength and service availability

find out if you have received messages

check which line is in use if you have the Two Line Service

check battery level

Icons in the Display

Icons are displayed when specific functions are active or if you have received

a message. The figure in the margin shows an overview of all the possible

icons and where they appear.

The table below shows every icon separately and also gives you an

explanation.

Icon: Name:

Description:

Signal strength meter

The strength of the received signal is indicated

in steps. Four steps indicate the strongest

signal.

Battery meter

The fuller the icon, the more power there is.

Keypad lock indicator

Divert indicator

The keypad is locked.

An arrow means that the Divert all function is

on.

Silent ring signal

SMS indicator

A crossed note means that no sound can be

heard when you receive a call.

The envelope icon means that you have

received a text message.

Voice mail indicator

Alarm indicator

The tape loops mean that you have received a

voice message.

The bell shows that the alarm clock has been

set and is on.

Display Information and Key Functions

Icon: Name:

Description:

L1/L2 Line indicator

Tells you which line is in use if you have the

Two Line Service.

Fixed incoming calls

indicator

This icon indicates that fixed incoming calls is

activated.

KEY FUNCTIONS

Before making or receiving a call, it is useful to understand the keys. The

table below explains the basic key functions.

Note! Some keys have different functions when you enter the menu system. See

“Using the Menu System” on page 30.

Key:

YES

Use:

To make and answer calls.

To turn the phone on or off (press and hold the key).

To end or reject a call.

To access and move (scroll) through the menu system.

LEFT and RIGHT

arrow keys

To erase digits from the display. Press and hold the key to

erase all digits.

CLR (Clear)

To mute the microphone, press and hold the key.

Number keys

Star

To enter the digits 0-9.

The 0 key enters the international (+) sign if held down.

To enter a star (*) character.

If held down it enters a “p” – pause.

Hash

To enter #.

To complete the input of PIN and security codes.

If held down it enters the character ¤.

Volume keys

UP and DOWN

To increase or decrease the volume of the earpiece or

handsfree loudspeaker.

To reject a call, press the volume keys up or down twice.

Mode switch

GSM: To switch between phone and speakerphone mode.

If slide is up the phone is in speakerphone mode; If slide is

down the phone is in phone mode.

GSM Pro: To switch between phone and “Push-To-Talk”

mode. If slide is up, the phone is in Push-To-Talk mode; if

slide is down, the phone is in phone mode.

Push-to-talk button In standby: to enter and scroll in Phone Book menu.

GSM: Push this button to mute the microphone.

GSM Pro: Push-to-talk mode, press this button to open

microphone. Phone mode, press this button to mute the

microphone.

Alert button

To make alert calls. Press and hold the alert button.

Display Information and Key Functions

Making and Receiving

Calls

The instructions in this chapter assume that you have turned on your phone

and that you are within range of a network. If you are abroad, you may use

other networks, provided your home network has an agreement that allows

you to do this. See “Setting Network Preferences” on page 70.

Key Functions

Before making and receiving calls, it is useful to understand the keys and their

functions. See “Display Information and Key Functions” on page 17.

MAKING A CALL

1. Enter the phone number, including the area code.

The digits are shown in the display. If you need to erase a digit, press CLR.

To erase all digits, press and hold the CLR key until all digits have been

erased.

NETWORK

012345678

2. Press YES to make the call.

The display shows Calling, followed by Connecting.

3. Press NO when you want to end the call.

While a call is in progress, a call time meter in the display shows how long

you have been on the phone in minutes and seconds. If you have turned on the

Call cost option and your network supports it, you see the price of the call in

the display. See “Knowing the Call Time/Call Cost” on page 78.

0:07 7

15:34

NETWORK

Last 1:35

15:36

When you end the call the Call time meter shows the duration of the call for

three seconds.

Tip! It is possible to check the duration of the call later on. See “Knowing the

Call Time/Call Cost” on page 78.

No Answer

If nobody answers your call or you cannot get through press NO. The number

is stored in a memory which makes it easy to repeat the call.

Making and Receiving Calls

RE-DIALLING A PREVIOUSLY CALLED NUMBER

Your phone conveniently lets you re-dial the last phone numbers you have

called (15 or more, depending on your SIM card). It can also re-dial a number

automatically if the connection failed when you first called.

To re-dial a previously called number

1. Press YES.

LAST DIALLED

The display shows the last dialled number.

2. Scroll with the LEFT and RIGHT arrow keys until you find the number

you want to call.

012345678

3. Press YES to make the call.

Automatic Re-dialling

If the connection fails and the receiver’s network supports it, the display

shows Retry? on the top row and the reason for the failure on the second row.

To re-dial the number automatically

•

Press YES when the message Retry? appears in the display.

The number is automatically re-dialled, up to 10 times:

•

until the call is answered. If the re-dialling is successful, the phone

beeps and then you hear a ring signal.

•

until you press a key or receive a call.

If you do not want to retry, press NO.

Note! Automatic retry is not available for fax and data calls.

MAKING INTERNATIONAL CALLS

1. Press and hold the 0 key until is displayed.

NETWORK

+80123456

The + automatically replaces the international dialling prefix for the coun-

try you are calling from.

2. Enter the country code, the area code (without the leading zero) and the

phone number.

3. Press YES to make the call.

Note! When you are abroad, your phone automatically searches for a network

that you are allowed to use. Which networks you can use depends on the

agreements your operator has signed with the operators in the country you

are visiting. See “Setting Network Preferences” on page 70.

Making and Receiving Calls

Checking the First Characters

If you have entered more characters than can be seen in the display, the first

characters are replaced by the l symbol. Press the RIGHT arrow key to check

the first characters.

MAKING ALERT CALLS

The R250s PRO is equipped with an Alert button, located on the top of the

phone, next to the antenna (see “Overview” on page 4). The alert button

makes it easy to set up a call to a pre-set alert number, without having to enter

the number manually.

When you buy your phone the alert number (when using the Alert button) is

set to the international emergency number 112. This number can be changed,

if you prefer to use another alert number. For more information on how to

change the pre-set alert number, see “Personalizing Your Phone” on page 46.

Note! If you change the pre-set alert number (112), you must insert a SIM

card and enter the PIN code (if the card is locked). Otherwise the pre-set alert

number (112) will be dialled and not the number you have specified.

To make an alert call the alert button must be switched on. When you buy

your phone the alert button is set to on. The alert button must be held down for

1 second, before a call is set up. This is to avoid accidental dialling if you

press the button by mistake.

To make an alert call using the Alert button

1. Press and hold the ALERT BUTTON.

The call is set up and the number dialled is shown in the display. (The pre-

set number is the international emergency number 112.)

2. Press NO to end the call.

Making Emergency Calls

You can also make an emergency call by entering the number in the same way

as when making an ordinary call.

To make an emergency call

1. Enter 112 (the international emergency number).

2. Press YES.

The display shows Emergency.

3. Press NO to end the call.

Note! Some Network operators may require that a SIM card has been inserted

into the phone and, in some cases, that the PIN has been entered as well.

Some networks may not use the international emergency number 112.

Making and Receiving Calls

RECEIVING A CALL

When you receive a call, the phone rings and the indicator light on top of the

phone blinks green rapidly. The display shows Answer?.

Answer?

If your subscription includes the Calling Line Identification service and the

caller’s network sends the number, you see the caller’s number at the bottom

of the display. If the number is stored with a name in the phone book, the

name is shown in the display.

Note! The phone must be turned on and within range of a network before a

call can be received.

Answering a Call

•

Press YES to answer the call.

When the call is finished, press NO.

Rejecting a Call

There are two ways of rejecting a call:

•

Press the NO key.

Double click the volume key (up or down) on the side of the phone.

The caller hears a busy tone if the caller’s network supports this function.

If “Divert on busy” is on, the incoming call is diverted to the number you

have specified. See “Diverting Incoming Calls” on page 62.

Tip! To mute the ring signal when you receive a call, press CLR.

HIDING OR SHOWING YOUR NUMBER

With most common subscriptions, the caller’s number is sent when a call is

made. This means that the receiver can see your phone number when you

make a call. However, some operators offer subscriptions where your phone

number is normally hidden.

If you want to change the setting for a particular call, this is possible provided

the network you use supports it.

To hide your phone number for a particular call

1. Enter the phone number you wish to call.

2. Press the RIGHT key.

Special

functions

The Special functions menu appears in the display.

3. Press YES to enter the Special functions menu.

4. Select Hide Id and press YES to make the call.

SPECIAL FUNC

Hide ID

01234567890

Making and Receiving Calls

To Show Your Number for a Particular Call

1. Enter the phone number you wish to call.

2. Press the RIGHT key.

Special

Functions

The Special functions menu appears in the display.

3. Press YES to enter the Special functions menu.

4. Select Show Id and press YES to make the call.

SPECIAL FUNC

Send ID

01234567890

Making and Receiving Calls

During a Call

Your phone has several functions which you might find helpful while a call is

in progress.

CHANGING THE EARPIECE VOLUME

During a call you can change the earpiece volume.

To change the earpiece volume during a call

•

Press the volume key on the side of the phone up or down.

•

Pressing UP increases the volume.

Pressing DOWN decreases the volume.

MUTING THE MICROPHONE

During a call you may want to talk to someone else in the room without the

person on the line hearing the conversation.

To turn the microphone off temporarily during a call

1. Press and hold the CLR key. Mute is shown in the display.

2. Release the CLR key to turn the microphone on again.

Tip! You can also press and hold the Push-to-talk button to mute the

microphone.

SCRATCH PAD FUNCTION

If you need to write down a phone number during a call, you can use the

Scratch pad function.

To use the Scratch pad

•

Enter the phone number using the number keys.

When you end the call, the number remains in the display. You can now

call the number by pressing YES or save it in the Phone Book. See “Your

Personal Phone Book” on page 33.

Note! If you press any numeric key while on the phone, the person on the

other end of the line hears a tone.

During a Call

SENDING TONE SIGNALS

To use telephone banking services or control a telephone answering machine,

you need to use codes. These codes are sent as tone signals (also known as

DTMF tones or touch tones).

To send tone signals/codes during a call

•

Press the appropriate keys (0–9, * and #).

Tip! You can also save the code together with a number in the Phone Book.

See “Your Personal Phone Book” on page 33.

Note! If you send tone signals while on the phone, the person on the other end

of the line hears the tones.

CHECKING DURATION/COST OF CALL

During a call, the display shows the duration of the call in minutes and sec-

onds. If you prefer, you can have the call cost displayed, provided your net-

work and your SIM card support this feature. See “Knowing the Call Time/

Call Cost” on page 78 for more information.

MORE THAN ONE CALL SIMULTANEOUSLY

Your phone is capable of handling more than one call simultaneously. You can

put the current call on hold, and then make or answer a second call. You can

also set up a conference call with up to five people. See “Handling More than

One Call Simultaneously” on page 74 on how to use this feature.

During a Call

Speakerphone

The R250s PRO is equipped with a speakerphone which, when on, increases

the earpiece/loudspeaker volume significantly.

The speakerphone is very useful when e.g you need to speak to someone on

the phone and continue using both hands. You may, e.g. receive some instruc-

tions over the phone that you need both hands to perform.

The speakerphone is also convenient when you want other people to partici-

pate in a conversation. Call the person you want to talk to, switch to speaker-

phone mode and place the phone on a table e.g. Now, all the people around the

table can talk to the person on the other end of the line.

Note! If you are using a GSM Pro SIM card, the speakerphone mode is not

available. Please refer to the information in chapter “GSM Pro” on page 90.

TURNING ON THE SPEAKERPHONE

To turn on the speakerphone you slide the mode switch on the right side of the

phone upwards (see “Overview” on page 4).

Tip! The phone has different volume settings for phone and speakerphone

modes. See “Earpiece Volume” on page 47.

Switching Between Phone and Speakerphone Mode

You can switch between phone and speakerphone mode at any time: when the

phone is in standby; when you receive a call and during a call.

When you receive a call you can switch from phone to speakerphone mode or

vice versa to answer the call. The call will then be answered in the selected

mode.

To switch between phone and speakerphone mode

•

Slide the MODE SWITCH upwards to go to speakerphone mode.

Slide the MODE SWITCH downwards to go to phone mode.

When you switch mode the phone sends out a warning tone.

While the phone is in speakerphone mode, do not hold the phone close to your

ear as this may cause damage to your hearing. Hold the phone in front of your

face around 30-50 cm away and speak into the microphone.

Speakerphone

MAKING AND RECEIVING CALLS

Making and receiving calls in speakerphone mode is done in the same way as

in phone mode.

To make a call in speakerphone mode

1. Enter the phone number, including the area code, and press YES.

Do not hold the phone close to your ear during the conversation.

2. Press NO to end the call.

To answer a call in speakerphone mode

1. Press YES to answer the call.

Do not hold the phone close to your ear during the conversation.

•

If your phone is in phone mode you can also answer the call by sliding

the mode switch upwards to go to speakerphone mode.

2. Press NO to end the call.

To reject a call

•

Press NO or double click the volume key (up or down).

Speakerphone

FUNCTIONS AND SETTINGS

Using the Menu System 30

Your Personal Phone Book 33

Keeping Track of Your Phone Calls 42

Your Voice Mail Service 44

Personalizing Your Phone 46

Sending and Receiving Text Messages (SMS) 53

Diverting Incoming Calls 62

Security for Your Phone and Subscription 64

Setting Network Preferences 70

Handling More than One Call Simultaneously 74

Knowing the Call Time/Call Cost 78

Using Two Phone Lines 81

Calling Card or Credit Card Calls 83

Sending and Receiving Fax and Data calls 85

Some Useful Tools 86

Using the Menu System

The menu system allows you to control the phone’s functions and to custom-

ize it to suit your personal preferences. You use the menu system every time

you want to change a setting in your phone, such as the ring signal.

Each menu contains a list of options. Some menus have sub-menus with addi-

tional options.

MOVING THROUGH THE MENU SYSTEM

The menus are arranged in a continuous loop, which you move (scroll)

through with the LEFT, RIGHT, YES, NO and CLR keys.

Press…

RIGHT

LEFT

YES

to…

scroll clockwise through menus or functions.

scroll anti-clockwise through menus or functions.

select a menu or function, enter a sub-menu.

go back one level in the menu system and/or leave a

setting unchanged.

go back to the standby display.

CLR

Tip! Instead of pressing the RIGHT or LEFT key repeatedly, you can press

and hold it down until you reach the menu or sub-menu you want.

Note! If you enter the menu system, but do not press a key within 60 seconds,

the phone returns to standby mode.

To select a menu or make a setting

1. Press the RIGHT or LEFT key until you find the menu or function you

want.

2. Press YES to enter the menu or to select the function.

3. Press the RIGHT or LEFT key to find the sub-menu you want or to select a

setting alternative.

4. Press YES to enter the sub-menu or to confirm the setting.

DISPLAY TEXT AND SYMBOLS

When you move through the menu system, the display changes. The following

hints can help you:

•

Capital letters are used to indicate the menu or function selected.

Using the Menu System

•

When L and R are displayed, there are more options you can scroll

through with the RIGHT and LEFT keys.

Text in brackets shows the current setting of the function shown in the

display.

In this manual, we have chosen to exclude some of the details above in the

pictures of the displays. This is to make it easier for you understand the dis-

play texts in the margins.

Below is an overview of the main menus. Please note that other menus are

available if you subscribe to the two line service and if you have turned on the

Data menus.

NETWORK

06:01

LRing levelR

(QQQQQqq)

LPhone bookR

Mail

Info

L Keylock

On?

L Divert

L Clock

L Networks

LCalculatorR

L Access

L Settings

INTERPRETING THE INSTRUCTIONS IN THE MANUAL

To help you understand the instructions in this manual, see the example below

of how to interpret the instructions.

Example:

1. Scroll to Settings, YES, Key sound, YES.

2. Select the key sound you want and press YES.

Interpret This Instruction As Follows:

1. From the standby mode, use the LEFT or RIGHT keys to scroll to the Set-

tings menu.

Settings

Using the Menu System

The arrows on either side of the word Settings mean that you can scroll to

another menu.

SETTINGS

LEar volumeR

(QQQQq)

2. Press YES to select the Settings menu.

Now you are in the Settings menu. The name of the menu that you have

chosen is shown in capital letters at the top of the display.

3. Use the LEFT or RIGHT keys to scroll to the Key sound menu.

The current setting is shown in brackets at the bottom of the display.

4. When you find the Key sound menu press YES to select it.

5. Use the LEFT or RIGHT key to find the key sound you want.

6. Press YES to select the key sound.

SETTINGS

LKey soundR

(Click)

KEY SOUND

Silent

7. Press CLR to return to standby.

Using the Menu System

Your Personal

Phone Book

Your phone has a phone book in which you can store names and numbers. The

phone book also keeps track of your last dialled numbers and, if you subscribe

to the Calling Line Identification service (CLI), the last answered numbers.

Convenient if you have to call someone back. Please see “Keeping Track of

Your Phone Calls” on page 42 for more information.

When you receive a call and the caller’s number and name is stored in the

phone book, you see the name in the display.

JIM

(4)

If you are planning to use your phone abroad, it is a good idea to store all your

phone numbers with the international (+) sign.

+123456789

PHONE BOOK MEMORIES

You can store your phone numbers in two different memories:

•

the card memory on the SIM card.

the phone memory.

JIM

(¤4)

Every phone number that you store includes a position number, shown in

brackets. If the number is stored in the phone memory (see below) a (¤) is

shown in front of the position number.

+81234567890

Storing your numbers in the card memory allows you to use the numbers

stored on the SIM card even when you change phones, i.e. when you insert

your SIM card into another phone.

On the other hand, by storing your numbers in the phone memory, they are

always available to you on your phone, even if you change SIM cards.

The memory positions in the card memory are numbered from 1 upwards. The

actual number of memory positions available depends on your SIM card.

The phone memory can hold up to 99 phone numbers. The memory positions

are labelled ¤1 – ¤ 99.

Note! In the Phone Book menu, press # to enter the ¤ character. Outside the

‘Phone book’ menu, you must press and hold down # to enter the ¤ character.

Your Personal Phone Book

If you are using a SIM Pro card, see “GSM Pro” on page 90. Some storing

positions on the SIM card may be used by your service administrator. This

means that you may not be allowed to edit, store or erase these positions. For

more information, please contact your service administrator.

International Numbers

If you intend to use your phone both at home and abroad, you should store all

phone numbers as international phone numbers, that is with the ‘+’ sign –

which replaces the international dialling prefix for the country you are calling

from – followed by the country code, then the area code and the phone

number.

•

To enter the ‘+’ sign, press and hold 0.

Omit the leading zero in the area code.

ENTERING LETTERS

You can only enter letters when you are using the phone book and when you

are composing text messages (e.g. SMS), see “Sending and Receiving Text

Messages (SMS)” on page 53.

Press the appropriate key, 1–9, 0 or #, repeatedly until the character you want

appears in the display.

Press…

to get…

Space - ? ! ‚ . : " ’ ( ) 1;<=>

A B C Å Ä Æ à Ç 2 Γ

D E F è É 3 ∆ Φ

G H I ì 4

J K L 5 Λ

M N O Ñ Ö Ø ò 6

P Q R S ß 7 Π Σ

T U V Ü ù 8

W X Y Z 9

0 + & @ / $ % £ Θ Ξ Ψ Ω ¤ ¥ § ¿ ¡

# *

Example

•

To enter an A, press 2 once.

To enter a B, press 2 twice.

To enter lower case letters. Enter the letter, e.g. an ‘A’. Then press *, an ‘a’

appears. Lower case letters will now appear until you press * again.

Your Personal Phone Book

•

To enter the second letter on the numeric keys straight away, e.g. a ‘B’,

press and hold the volume key upwards, then press 2. To enter the third

letter, e.g. a ‘C’, press and hold the volume key downwards, then press 2.

To enter a digit press and hold the desired key.

•

To erase letters to the left of the cursor press CLR.

STORING A NUMBER TOGETHER WITH A NAME

STORE

1. Scroll to Phone book, YES, Store, YES.

2. Enter a name to accompany the phone number.

3. Press YES.

Name: John Doe

STORE

4. Enter the phone number.

Name: John Doe

Enter no: 0123456

5. You now have four options:

•

Press YES to save the number in the card memory, in the first empty

position (displayed in the top right-hand corner).

To save the number in the card memory, in a position you decide:

press the RIGHT key, enter the position and then press YES.

To save the number in the phone memory, in the first empty position:

press the RIGHT key, press the # key twice and then press YES.

To save the number in the phone memory, in a position you decide:

press the RIGHT key, press the # key once, enter the position and then

press YES.

STORE

¤15

Name: John Doe

Enter no: 0123456

Tip! If you enter a number in the scratch pad during a call, you can store it in

the Phone Book by selecting Store from the Phone Book menu while you have

the number in the display.

Telephone Banking Services

To use telephone banking services or control a telephone answering machine,

you need to use codes. These codes are sent as tone signals (also called DTMF

tones or touch tones).

To store a number together with an account number and security code

1. Scroll to Phone book, YES, Store, YES.

2. Enter a name to accompany the phone number.

Use the numeric keys as described above.

3. Press YES.

4. Enter the phone number.

STORE

Bankbyphone

012345678p

5. After entering the phone number, press and hold the * key until the pause

character appears.

6. Enter the code. If needed, insert another pause, another code and so on.

7. Press YES to store.

Your Personal Phone Book

To make a call with tone signal codes, proceed as described in “Making and

Receiving Calls” on page 19. When you make the call, the phone dials the

number, waits until the call is answered and then sends the code. If you

inserted another pause and another code, it pauses again, sends the next code

and so on.

OVERWRITE PROTECTION

STORE

Used

Overwrite?

If you try to store a phone number in a position which already contains a

phone number, the message Used Overwrite? appears in the display. You then

have two options.

To store the number in the selected position

•

Press YES to replace the number with the new one.

To store the number in a different position

1. Press NO.

2. Enter the new position number and press YES.

When a Memory is Full

If you try to store a phone number, e.g. in the phone memory, and the memory

you want to store it in is full, the phone suggests a position number in the

memory that is not full, in this case the card memory.

When Both Memories are Full

If both memories are full, no position number is suggested. If you still wish to

store the phone number, you have to erase an old number by entering a posi-

tion number that is already occupied.

To erase a phone number from the phone book memory

1. Scroll to Phone book, YES, Erase, YES.

ERASE

2. Enter or scroll to the position number you want to erase.

3. Press YES to erase the number.

John Doe

Erase?

Tip! You can also recall the number you want to erase by using Name recall

or Position recall. When the name appears, press and hold CLR.The message

Erase? appears in the display. Press YES to erase the number.

To erase all numbers from the phone memory

1. Scroll to Phone book, YES, Erase all from phone, YES.

ERASE ALL

Erase 30

The message Erase 30

positions? appears in the display, where the number

¤ positions?

indicates the total number of entries stored in the phone memory.

2. To erase all phone numbers from the phone memory, press YES.

Note! It is not possible to erase all phone numbers from the card memory.

Your Personal Phone Book

Note! If you are using a GSM Pro card (see “GSM Pro” on page 90) some

storing positions on the SIM card may be used by your service administrator.

This means that you may not be allowed to use these positions for storing your

own phone book entries. For more information, please contact your service

administrator.

USING THE PHONE BOOK

The Push-To-Talk button on the left side of the phone, (see “Overview” on

page 4), makes it very easy to call a number that you have stored in your

phone book. To call a number, you only need to press the Push-To-Talk button

to enter and scroll through your phone book entries.

To call a number in the phone book using the Push-To-Talk button

1. Press CLR to go to standby (if you are not already in standby).

2. Press and hold the PUSH-TO-TALK button to enter the phone book and

scroll through the entries until you find the number you want to call.

3. Press YES to make the call.

Calling a Number in the Phone Book Using the Keypad

You can also call a number stored in the phone book by recalling the name

stored with it or recalling the memory position that the number is stored in.

To recall a phone number using the name

1. Scroll to Phone book, YES, Name recall, YES.

NAME

RECALL

2. Enter the name you want to recall (or the first letters of it) using the

numeric keys as described above.

Name: SUE

You do not have to enter the entire name; the first few letters will do. The

phone matches the letters with existing names in its memory.

3. Press YES.

SUE

(6)R

012345678900

The best match between the letters you entered and the names in the Phone

Book is displayed. You can also see the storage position in brackets.

4. If the name displayed is not the one you want, press the LEFT or RIGHT

key until you find the correct name and number.

5. Press YES to make the call.

Tip! You can also enter the name directly after pressing LEFT from the empty

standby display.

If you know the memory position in which you have stored a certain phone

number, you can recall the number by using the position.

Your Personal Phone Book

To recall a phone number using the position

1. Scroll to Phone Book, YES, Position recall, YES.

2. Enter the position number of the stored phone number.

For a position in the card memory, simply enter the number. For a position

in the phone memory, press and hold the # key until the ‘¤’ character

appears and then enter the number.

NAME

RECALL

Position:

SUE

(6)R

3. Press YES.

012345678900

The name and phone number now appear in the display.

If you entered the wrong position number, press the LEFT or RIGHT key

repeatedly until you find the phone number you want.

4. Press YES to call the number.

Tip! You can also enter the position directly in the standby display and then

press the # key to recall the phone number. Do not forget the ‘¤’ before the

position if the number is stored in the phone memory (to get the ‘¤’ character,

press and hold the # key).

The Speed Dialling Facility

You can call the phone numbers that you store in positions 1–9 in the card

memory by entering the position number and then pressing YES. It is a good

idea to save positions 1–9 for important numbers.

Example:

To call Bob, whose number is stored in position 3 in the card memory:

1. Enter the number 3.

2. Press YES.

KEEPING THE PHONE BOOK UP TO DATE

Sometimes people change their names, their phone numbers or even both. To

get the best use out of your phone book, you want the names and numbers to

be correct. They are easily changed with the Edit feature. If someone has

changed both name and number, it might be easier to overwrite the old storage

position with the new one, instead of changing both name and number

separately.

Note! If you are using a SIM Pro card you may not be allowed to edit the

phone numbers that your service administrator are using.

There are two ways of finding the Phone Book entry you wish to edit. You can

use either the storage position or the name.

Your Personal Phone Book

To edit an entry using the position

EDIT

1. Scroll to Phone book, YES, Edit, YES, Find pos.

2. Enter the position number for the entry you wish to edit.

For a position in the card memory, simply enter the number. For a position

in the phone memory, press and hold the # key until the ‘¤’ character

appears and then enter the number.

Find pos

Position

3. Press YES.

EDIT

You will now see:

BOB

•

the name (displayed in the middle row)

012345678900

the phone number (displayed in the bottom row)

the storage position (displayed in the top row)

4. To select the row you wish to edit, press the RIGHT key.

You see the cursor to the right of the row you selected.

5. Edit the row by using:

•

the CLR key to erase

the numeric keys to enter letters or digits

the LEFT key to move the cursor left (or the RIGHT key to move the

cursor right when it is positioned in a row)

6. If needed, press the RIGHT key to select another row and continue editing.

7. To save the changes, press YES.

To edit an entry using the name

EDIT

1. Scroll to Phone book, YES, Edit, YES, Find name, YES.

2. Enter the name for the entry you wish to edit, using the numeric keys. The

more letters you enter, the better the match.

Find name

Name

BOB

3. To select the entry, press YES.

4. You can now continue from step 4 as described above.

COPYING PHONE NUMBERS BETWEEN MEMORIES

If you want to change SIM card or phone, it is a good idea to copy the phone

book entries stored on your SIM card to the phone memory or vice versa.

Then you can easily copy the phone book back to the memory of your choice.

Also, as you fill up the phone book memories, you might want to move entries

from one memory to another.

To copy all numbers from card memory to phone memory

1. Scroll to Phone book, YES, Copy all, YES.

COPY ALL

2. Select CardrPhone and press YES.

L CardrPhone R

3. Enter the number of the first position in the card memory you wish to copy

to the phone memory and press YES.

COPY CARD

From start

Position:

Your Personal Phone Book

4. Enter the number of the first position in the phone memory you wish to

copy to and press YES.

The message Old pos will be erased Start copy? appears in the display.

5. Press YES to start copying.

Note! If you are using a SIM Pro card the menu “Copy all CardrPhone” may

not be available.

To copy all numbers from the phone memory to the card memory

1. Scroll to Phone book, YES, Copy all, YES.

COPY ALL

2. Select PhonerCard and press YES.

L PhonerCard R

3. Enter the number of the first position in the card memory you wish to copy

to the phone memory and press YES.

COPY PHONE

From start

4. Enter the number of the first position in the phone memory you wish to

copy to and press YES.

Position: ¤_

The message Old pos will be erased Start copy? appears in the display.

5. Press YES to start copying.

To copy numbers from card memory to phone memory one by one

COPY

1. Scroll to Phone book, YES Copy, YES.

2. Select CardrPhone and press YES.

L CardrPhone R

3. Enter the number of the first position in the card memory you wish to copy

and press YES.

4. Enter the number of the first position in the phone memory you wish to

copy to and press YES.

BOB

5. Press YES to start copying.

Copy to ¤29

The starting position in the card memory is displayed and the next empty

position in the phone memory is suggested.

6. To continue copying, press one of the following:

•

YES to copy.

NO to go to the next position in the card memory.

CLR to copy to another position in either the card or phone memory.

Enter the number of the position and press YES.

The LEFT and RIGHT key to move between positions in the card

memory.

•

To interrupt copying

•

Press CLR twice.

Your Personal Phone Book

To copy numbers from phone memory to card memory one by one

1. Scroll to Phone book, YES, Copy, YES.

2. Select Phone

rcard and press YES.

To copy from the phone memory to the card memory use the YES, NO and

CLR keys as described in “To copy numbers from card memory to phone

memory one by one” above.

Your Personal Phone Book

Keeping Track of Your

Phone Calls

CALLING SOMEONE WHO HAS CALLED YOU

If you subscribe to the Calling Line Identification service, and the caller’s net-

work sends the number, the numbers of the last ten answered calls are stored

in the phone memory.

To recall one of the last ten answered numbers

1. Scroll to Phone book, YES, Answered calls, YES.

2. Select the number you want to call.

3. Press YES to make the call.

ANSWERED

To clear the answered calls memory

1. Scroll to Phone book, YES, Answered calls, YES.

2. Press CLR.

123456789

Erase

all?

The question Erase all? appears.

3. Press YES to erase all numbers from the answered calls memory.

UNANSWERED CALLS

If you have received calls but have been unable to answer, the number of

missed calls is shown in the display in standby mode until you press CLR.

NETWORK

Calls:2

15:49

Information about the ten last missed calls is saved in the phone memory,

which makes it possible for you to see when the calls were received. If your

subscription includes the Calling Line Identification service and the caller’s

network sends the number, you can also find out who called. If you have

stored the number together with a name in the phone book the name also

appears. See “Your Personal Phone Book” on page 33.

To find out who called and when

Mail

1. Scroll to Mail, YES, Missed calls, YES.

The last caller’s number (if your subscription includes the Calling Line

Identification service) is now shown in the display together with the time

MISSED CALLS

16:01

123456789

Keeping Track of Your Phone Calls

(or date) when the call was received. If no information about the caller’s

number was received, the display shows one of the following:

•

Unidentified, which means that no information was available.

MISSED CALLS

Restricted, which means that the caller wanted to withhold the number.

19-02-99

Unidentified

2. To see your other unanswered calls, press the LEFT or RIGHT arrow key

repeatedly.

3. Press NO to return to the Missed calls menu.

Note! If you check a missed call the same day as you received it, the time of

the call is displayed. Otherwise, the time is replaced by the date. You can tog-

gle between date and time by pressing *.

To call a number from the missed calls list

1. Scroll to Mail, YES, Missed calls, YES.

2. Select the number you want to call and press YES.

3. Press NO to end the call.

To erase a number from the missed calls memory

1. Scroll to Mail, YES, Missed Calls, YES.

2. Select the number you want to erase and press CLR.

The question Erase? appears in the display.

3. Press YES to erase the number.

Keeping Track of Your Phone Calls

Your Voice Mail Service

Note! Not all operators have this service. The service also depends on your

subscription.

The answering service of your network allows callers to leave a voice mes-

sage when you cannot answer your calls. When you receive a voice mail, an

alert signal sounds, if turned on, and the voice mail icon appears in the dis-

play.

Voicemail

Check?

Whenever you have a waiting voice mail waiting for you a Tt symbol is

NETWORK

shown at the bottom of the display.

Tt 19:09

Further information about the use of the answering service is found in the

information supplied by your network operator.

Note! Some operators may inform you of a waiting voice mail by sending a

SMS (see “Sending and Receiving Text Messages (SMS)” on page 53).

ENABLING THE VOICE MAIL FUNCTION

On most SIM cards the number to the Voice mail service is stored on the SIM

card. If the number cannot be retrieved from your SIM card, you need to enter

the phone number yourself.

To enter the phone number to the voice mail service

1. Scroll to Mail, YES, Set VoiceM, YES, New number, YES.

2. If no number appears, enter the new number.

3. Press YES to confirm your new number.

To enable the Voice mail function on your phone

1. Scroll to Mail, YES, Set VoiceM, YES.

2. Select On and press YES.

CALLING YOUR VOICE MAIL

When you receive a voice mail, this is indicated in the display by the message

Voicemail Check?. You can now check your message by pressing YES.

If you press NO, you can call the answering service at any time later on to lis-

ten to your recorded messages. To do this:

Your Voice Mail Service

•

Scroll to Mail, YES, Voice mail, YES.

The phone automatically calls your voice mail. Follow the instructions

given to you by your operator’s answering service.

Tip! You can also call your voice mail number by pressing and holding 1 in

standby mode.

To change your voice mail number

1. Scroll to Mail, YES, Set VoiceM, YES, New number, YES.

2. Enter the new number and press YES.

To change the voice mail alert signal

1. Scroll to Settings, YES, Mail Alert, YES.

2. Select the alert signal you want and press YES.

To turn the voice mail off

1. Scroll to Mail, YES, Set VoiceM, YES.

2. Select Off and press YES.

Your Voice Mail Service

Personalizing

Your Phone

The Settings menu includes a number of functions which lets you adapt your

phone to your own personal preferences. Some of the settings are only

affected if you have external equipment (e.g. handsfree equipment) connected

to your phone.

DISPLAY LANGUAGE

Most modern SIM cards automatically set the display language to the lan-

guage of the country where you bought your SIM card. If this is not the case

the default language is English.

To change the display language

1. Scroll to Settings, YES, Language, YES.

The currently selected language is shown in brackets.

2. Select the language you want and press YES.

SETTINGS

L Language

(Auto)

Note! If by accident you end up with a language you do not understand, you

can return to English by pressing LEFT 0000 RIGHT at any time.

ALERT BUTTON

The R250s PRO is equipped with an Alert button located on the top of the

phone, next to the antenna (see “Overview” on page 4). By pressing and hold-

ing the alert button you can easily set up a call to a pre-defined alert number,

without having to dial the number in the ordinary way.

When you buy your phone, the alert number (when using the Alert button) is

set to the international emergency number 112. This number can be changed,

if you prefer to use another alert number.

Note! If you change the pre-set alert number (112), you must insert a SIM

card and enter the PIN code (if the card is locked). Otherwise the pre-set alert

number (112) will be dialled and not the number you have specified.

SETTINGS

Alert key

You must turn on the alert function before you can use the alert button. When

you buy your phone the alert button is activated.

Personalizing Your Phone

To turn the Alert button on or off

1. Scroll to Settings, YES, Alert key, YES.

2. Select On or Off and press YES.

ALERT KEY

To change the alert number

1. Scroll to Phone book, YES, Alert number, YES.

2. Edit the number in the same way that you edit other phone book entries.

You can also associate a name with the alert number. See “Your Personal

Phone Book” on page 33

PHONE BOOK

Alert

Number

3. Press YES to confirm your new alert number.

Note! If fixed dialling is activated, the alert number must be included in this

list. If it is not included, you cannot use the alert button to make an alert call.

However, if the alert number is the international emergency number 112 you

do not have to include it in the fixed dialling list. For more information about

fixed dialling, see “Fixed Dialling and Fixed Incoming Calls” on page 68.

EARPIECE VOLUME

There are two separate volume settings for your phone, depending on which

mode, Phone or Speakerphone, you have currently selected. The mode cur-

rently selected is displayed in the middle row when you enter the Ear volume

menu.

You can have independent volume settings when you use the phone together

with different handsfree equipment. This means that if you set the earpiece

volume when the phone is connected to handsfree equipment, the volume set-

ting when the phone is handheld is not affected and vice versa.

Note! If you are using a SIM Pro card there will be a volume setting for the

Push-to-talk mode instead of the speakerphone mode. See “Earpiece volume”

on page 91.

To set the earpiece volume

1. Scroll to Settings, YES, Ear volume, YES.

The current mode, Phone or Speakerphone, is displayed in the middle row.

2. Use the LEFT key to decrease the volume.

Use the RIGHT key to increase the volume.

3. Press YES to confirm your volume setting.

EAR VOLUME

SPEAKER

LQQQQQqqqR

Tip! During a call you can use the volume keys at the side of the phone to

adjust the volume.

Note! When you switch the phone to Speakerphone mode (or Push-to-talk

mode) the loudspeaker volume increases significantly. Do not hold the phone

Personalizing Your Phone

close to your ear during a conversation as it may cause damage to your hear-

ing. For more information, see “Speakerphone” on page 26.

RING SIGNAL VOLUME

You can set the ring signal level in seven steps. The first step means that two

clicks are heard when you receive a call. The last step means that the phone

rings with an increasing ring signal.You can also turn the ring signal off. The

Ring level setting allows you to specify the level:

•

when the phone is handheld.

when the phone is connected to handsfree equipment.

To set the ring signal level

1. Scroll to Ring level, YES, Buzzer, YES.

2. Use the LEFT and RIGHT key to set the ring signal level.

RING LEVEL

Buzzer

•

Pressing RIGHT increases the volume.

LQQQQqqqR

Pressing LEFT decreases the volume.

The phone rings once with the actual setting as you increase the vol-

ume, except for the Off and Step settings.

3. Press YES to save the setting.

Tip! Use the side keys to change the ring level silently.

VIBRATING CALL ALERT

If you turn the Vibrating call alert on the phone vibrates when you receive a

call or a text message. This is useful when you e.g. are working in a noisy

environment and cannot hear the phone ringing.

To turn the vibrating call alert on or off

1. Scroll to Ring level, YES, Vibrator, YES.

2. Select On or Off and press YES.

RING LEVEL

Vibrator

(Off)

Note! You can choose to have both the buzzer and the vibrating call alert on

at the same time.

RING SIGNAL TYPE

You can choose a ring type from a list of different sounds and melodies. You

can also compose your own melody by entering notes with the keypad (see

“Composing your own melody” below).

To choose one of the ring signal types

1. Scroll to Settings, YES, Ring type, YES.

The current ring signal type is displayed.

2. Select the ring signal type you want and press YES.

RING TYPE

Phone

(Medium)

Personalizing Your Phone

Note! If the Data menus are set to on (See “Sending and Receiving Fax and

Data calls” on page 85), you can set the ring signal type for speech (the dis-

play shows ‘Phone’ in the middle row), fax and data calls respectively. If you

have the Two Line service, see “Using Two Phone Lines” on page 81), you

can also set different ring types for the two lines.

COMPOSING YOUR OWN RING SIGNAL

You can compose a melody of your own to use as your ring signal.

To compose your own ring signal

1. Scroll to Settings, YES, Edit Melody, YES.

2. Use the numeric keys to enter notes.

3. Press YES to listen to the melody.

The question Ready? appears in the display.

4. If you want to save the melody press YES to save it. If not, press NO and

continue editing.

MESSAGE SIGNAL

You can choose whether to hear clicks, the mixed ring signal or nothing

(silent) when you receive a text or voice message, i.e. a SMS.

To set the message signal

1. Scroll to Settings, YES, Mail alert, YES.

2. Select the sound you want to hear when you receive a message.

3. Press YES to confirm your selection.

SETTINGS

Mail Alert

(Click)

MINUTE MINDER

When the minute minder is activated, you hear a beep once every minute

while you are on the phone.

SETTINGS

Min minder

(Off)

To turn on/off the minute minder

1. Scroll to Settings, YES, Min minder, YES.

2. Select On or Off and press YES.

KEY SOUND

You can choose whether to hear clicks, tones or nothing (silent) when you

press the keys.

To set a key sound

KEY SOUND

Click

1. Scroll to Settings, YES, Key sound, YES.

2. Select the key sound you want and press YES.

Note! The only sound available for the volume keys is the click sound.

Personalizing Your Phone

DISPLAY LIGHT

The display light can be set to automatic, off or on. In automatic mode, the

display light is turned off automatically 20 seconds after the last key is

pressed. It is turned on again when a key is pressed or when a call or message

is received.

To set the display light

1. Scroll to Settings, YES, Light, YES.

2. Select the display light setting you want and press YES.

SETTINGS

Light

(Auto)

Note! You can have one setting when the phone is used as a handheld unit and

another when the phone is used with a handsfree kit, powered from an exter-

nal source. E.g. if you place the phone in a vehicle handsfree holder, you can

set the display light so that it is always on.

GREETING TEXT

When you turn on your phone, a greeting text appears in the display. Instead

of the default greeting, you can have your phone display a welcome greeting

that you write yourself. However, some operators may not allow the greeting

text to be changed.

To enter your own greeting

1. Scroll to Settings, YES, Greeting, YES, New text, YES.

2. Enter your new greeting, using the numeric keys. For information on how

to enter letters, see “Entering Letters” on page 34.

3. Press YES to confirm your new greeting text.

GREETING

New text

(Welcome)

To turn the Greeting text on/off

1. Scroll to Settings, YES, Greeting, YES.

2. Select On or Off and press YES.

PHONE NUMBER DISPLAY

When you turn on your phone, your phone number will be displayed, provided

it can be retrieved from your SIM card. If not, you can enter it yourself.

To enter your phone number

1. Scroll to Settings, YES, Phone no, YES.

2. Enter your phone number.

NUMBER

Phone no

(

)

3. Press YES to confirm your choice.

Note! If your SIM card allows it, you can also enter your fax and/or data

number.

Personalizing Your Phone

TIME AND DATE

The Clock menu lets you set the time and date. It also lets you turn on the

alarm function (see “Alarm” on page 86). The time is shown continuously at

the bottom of the display when the phone is in standby mode.

When you buy your phone, the time is set to the 24-hour format. If you wish

you can change it to the 12-hour format.

To change the time format

1. Scroll to Clock, YES, Clock mode, YES.

2. Select the clock mode you want, 24 hours or AM/PM.

3. Press YES.

CLOCK

Clock mode

(24 hours)

To set the clock

1. Scroll to Clock, YES, Set Clock, YES.

2. Enter the time in hours and minutes.

3. Press YES.

SET CLOCK

(18:39)

_ –:– –

Note! If you select the 12-hour format in the ‘Clock mode’ function, you can

alternate between am and pm by pressing #.

The Date

It is possible to have the date displayed in the middle row of the display when

the phone is in standby mode.

To set the date

1. Scroll to Clock, YES, Set date, YES.

2. Enter the year (two digits) and press YES.

3. Enter the month and day in the same way.

4. Press YES.

SET DATE

Enter year:

To set the date format

1. Scroll to Clock, YES, Date mode, YES.

CLOCK

2. Select the date format you want, or select Off if you do not want the date to

Date mode

(08-feb-99)

be displayed.

3. Press YES.

MASTER RESET

It is possible to reset all menu settings to the way they were when you bought

your phone. To reset all settings you must enter the Phone lock code. The

default code when you buy your phone is 0000. For more information, see

“Security for Your Phone and Subscription” on page 64.

SETTINGS

master

Reset

Personalizing Your Phone

To reset all settings

1. Scroll to Settings, YES, Master reset, YES.

2. Enter the phone lock code. (The default code is 0000.)

3. Press YES to reset all settings.

Enter code

to reset

Personalizing Your Phone

Sending and Receiving

Text Messages (SMS)

The Short Message Service (SMS) allows you to send and receive text mes-

sages consisting of up to 160 characters. If your phone is turned off when a

message is sent to you, an envelope icon lets you know you have a message

when you turn your phone back on.

To be able to reply to received messages and send your own messages, the

number to your network service centre must be set. If your SIM card does

not contain the phone number to your network service centre, you must spec-

ify the number yourself. See “Enable the Phone to Send SMS” on page 54.

Note! The Short Message Service may not be available in all networks. Some

network operators may only allow SMS to be sent within their own network.

THE TWO MEMORIES

The phone has two memories for storing messages, the phone memory and the

card memory.

The Phone Memory

If you do not want to read an incoming message at once, it is automatically

stored in the phone memory. This allows you to read it later on.

If there are any unread messages in the messages memory, a letter icon (Mm)

appears in the bottom left of the display.

The phone memory can hold up to 10 messages. When all memory positions

are full, the oldest read message is overwritten when a new message is

received. If the phone memory becomes full of unread messages, new mes-

sages are automatically stored in the SIM card memory. If the SIM card mem-

ory becomes full, the letter icon (Mm) starts blinking.

Messages remain in the phone memory until you erase them (see “Erasing a

Message” on page 57), until you insert a different SIM card, or until the tele-

phone needs the memory space to store new messages.

Sending and Receiving Text Messages (SMS)

The SIM Card Memory

If you receive an important message and want to make sure it is not erased

from the phone memory, you can store it in a memory on your SIM card. This

means that you can retrieve the message regardless of which phone you use.

Messages that are saved in the SIM card memory remain there until you erase

them. If the SIM card memory becomes full, the letter icon (Mm) starts

blinking.

ENABLE THE PHONE TO SEND SMS

If the phone number to your network service centre cannot be retrieved from

your SIM card, you must specify the number yourself. Otherwise you cannot

reply to received messages or send your own messages.

MAIL

Send

Message

To set the number to your Network service centre

1. Scroll to Mail, YES, Send message, YES, Options, YES.

2. Select Serv cent and press YES.

SEND

MESSAGES

Message

3. If there is no number in the display enter the number of the service centre,

including the international (+) sign and press YES.

4. To return to standby mode, press CLR.

OPTIONS

Serv cent

(0123456789)

Your phone is now ready to send and receive text messages.

Note! Some network operators may only allow SMS to be sent within their

own network.

COMPOSING A TEXT MESSAGE

In order to compose your message, you have to know how to enter characters

using the numeric keys.

Press…

to get…

Space - ? ! ‚ . : " ’ ( ) 1;<=>

A B C Å Ä Æ à Ç 2 Γ

D E F è É 3 ∆ Φ

G H I ì 4

J K L 5 Λ

M N O Ñ Ö Ø ò 6

P Q R S ß 7 Π Σ

T U V Ü ù 8

W X Y Z 9

0 + & @ / $ % £ Θ Ξ Ψ Ω ¤ ¥ § ¿ ¡

# *

Sending and Receiving Text Messages (SMS)

Press the appropriate key, 1–9, 0 or #, repeatedly until the desired character

appears in the display.

Example:

•

To enter an A, press 2 once.

To enter a B, press 2 twice.

To enter lower case letters. enter the letter, e.g. an ‘A’. Then press *, an ‘a’

appears. Lower case letters now appear until you press * again.

To enter the second letter on the numeric keys straight away, e.g. a ‘B’,

press and hold the volume key upwards, then press 2. To enter the third

letter, e.g. a ‘C’, press and hold the volume key downwards, then press 2

To enter a digit press and hold the desired key.

•

To scroll through the text, use the LEFT and RIGHT keys.

To erase letters to the left of the cursor press CLR.

To check the first characters you have entered:

Press the LEFT key until you reach the characters you want to view.

•

Note! If there is a pause of more than 120 seconds between entering charac-

ters, the phone returns to the standby menu.

SENDING A TEXT MESSAGE

1. Scroll to Mail, YES, Send message, YES, New, YES.

An empty display appears.

New

2. Enter your message. See “Composing a Text Message” above.

3. When you have completed your message, press YES.

The message Request reply? appears in the display

4. If you want the recipient to reply to the message, press YES. If not, press

NO.

Request

reply?

5. Enter the recipient’s phone number or recall it from the phone book.

To access the Phone Book menu press LEFT.

6. You now have two options:

SEND

MESSAGES

LEnter no:

•

If you want to send the message now, press YES.

If you want to store the message for later use, press NO.

The message is now stored in the messages memory.

If you decide to send the message later, you can find it in the Send

message menu. The message is labelled To Send. For more information

on how to send a stored message see “Frequently Used Messages” on

page 59.

Sending and Receiving Text Messages (SMS)

Note! The same procedure is used with all types of messages, for example

e-mail, fax etc. Check with your network operator which message types you

can use.

CUSTOMIZING YOUR TEXT MESSAGES

If your message cannot be delivered because the recipient has turned off the

phone, your Service Centre can save your message and send it again later. If

your service centre has not been able to reach the recipient within a specified

time the message will be deleted.

SEND

MESSAGE

Options

To set the validity period of a message

1. Scroll to Mail, YES, Send message, YES, Options, YES.

2. Select Valid per and press YES.

OPTIONS

Valid per

(1 day)

3. Select the duration period you want and press YES.

Changing Message Types

The phone is prepared for sending other types of messages. Your network

operator’s Service Centre may offer the facility of converting a text message

into a format, fax, voice, e-mail etc. that suits the equipment that is going to

receive the message.

Please contact your operator for further information about the formats you can

use.

To set the message type

OPTIONS

Msg type

(Standard)

1. Scroll to Mail, YES, Send message, YES, Options, YES.

2. Select Msg type and press YES.

3. Select the message type you want and press YES.

Note! Standard means an ordinary text message (SMS) to other phones. Stan-

dard is the default message type.

RECEIVING AND READING A MESSAGE

When you receive a message, you hear a sound, the indicator light on the top

of the phone rapidly flashes green and the message NewMessage Read now?,

appears in the display.

4NewMessage

Read now?

To read the message now

New

1. Press YES.

17:22

The display shows who the message is from and when it was received. New

stands for a new unread message.

From: l4567890

If the message is older than 24 hours, the time is replaced with the date the

Sending and Receiving Text Messages (SMS)

message arrived. However, you can toggle between the date and time by

pressing the * key.

2. Press YES to read the first line of the message.

Scroll through the message using the LEFT and RIGHT keys. RIGHT

takes you forwards, and LEFT takes you backwards through the message.

To move three lines forward, press 3. To move three lines backwards,

press 1. To return to the beginning of the message, press and hold LEFT.

3. The message Reply? appears after the last line of the message. If the caller

wants you to reply, the displayed message says Reply Requested Reply? pro-

vided your network supports this feature.

Goodbye!

Reply?

To read the message later

•

Press NO when the message NewMessage Read now? appears in the display.

The message is stored in the phone memory and a letter icon (Mm) appears

on the left at the bottom of the display. See “Reading Stored Messages” on

page 58.

REPLYING TO A MESSAGE

After reading a message you are asked if you want to reply.

To reply to a message

1. Press YES when you see the Reply? prompt at the end of the message.

Your display now looks like the picture in the margin.

2. To enter your message, press YES and proceed as described in “Sending a

Text Message” on page 55.

New

If you do not want to reply:

•

Press NO.

Note! If the sender of the message wants you to reply, the message Reply

Requested Reply?, appears instead of Reply?.

ERASING A MESSAGE

After reading a message you are asked if you want to reply.

Goodbye!

Erase?

To erase the message

1. Press NO when you see the Reply? prompt.

The message Erase? appears in the display.

2. Press YES to erase the message.

The next message automatically appears in the message list.

Note! You can also press CLR anywhere within the message to erase it. When

Erase? appears, press YES.

Sending and Receiving Text Messages (SMS)

STORING A MESSAGE

All incoming messages are stored temporarily in the phone memory until the

memory space is needed for other purposes, such as storing new messages.

Even so, sometimes you may receive an important message that you want to

store more safely. This is better done in the SIM card memory.

To store a message in the SIM card memory

1. Scroll to the end of the message.

Goodbye!

Store?

2. When the message Reply? appears press NO.

The message Erase? appears.

3. Press NO again.

The message Store? appears.

4. Press YES to store the message on the SIM card.

The message is automatically moved from the phone memory to the SIM

card memory.

Stored

on card

3(10)

The display now shows the position of the message. For example, if it is

the third of 10 messages that the phone can store.

Note! If the card memory is full, the text Not stored Mem full appears. In this

case you have to erase one or more messages before you can store any new

messages in the SIM card memory.

Tip! You can also store messages you have composed yourself on the SIM

card. See “Frequently Used Messages” on page 59.

READING STORED MESSAGES

1. Scroll to Mail, YES, Read messages, YES.

2. Select the message you are looking for.

•

New stands for a new unread message.

Old stands for a read message.

Sent stands for a sent message.

To Send stands message you have written but not sent.

3. Press YES and read the message as described in “Receiving and Reading a

Message” on page 56.

Note! If there is a * in front of the message, this means that it is stored on the

SIM card.

CALLING A PHONE NUMBER FOUND IN A MESSAGE

•

Press YES when the number appears in the display.

After the number has been called, the message is considered read and it

remains in the Messages memory.

Sending and Receiving Text Messages (SMS)

FREQUENTLY USED MESSAGES

If you have one or more messages you use often, you can store them on the

SIM card, to be re-used whenever you want.

Storing Frequently Used Messages

To make sure your standard messages are not erased when the phone memory

becomes full, you should store them in the SIM card memory.

To store a frequently used message on the SIM card

1. Scroll to Mail, YES, Read messages, YES.

The messages stored in your Messages memory appear.

2. Select the message you want to store in the SIM card memory.

3. Press YES. The message Erase? appears in the display.

4. Press NO. The message Store? appears in the display.

5. Press YES.

The message is now moved from the phone memory to the SIM card

memory.

To send a stored message

1. Scroll to Mail, YES, Send message, YES.

The message New appears in the display.

2. Scroll with the LEFT and RIGHT keys until you find the message you

want to send.

3. Press YES. Now you can edit your message, if you wish.

4. When the message is ready to be sent, press YES.

The message Request reply? appears.

5. If you want the recipient to reply to the message, press YES. If not, press

NO.

6. Enter the recipient’s phone number or recall it from the phone book. To

access the Phone book menu, press LEFT.

SEND

MESSAGES

LEnter no:

7. Press YES to send the message.

AREA INFORMATION

The ordinary Short Message Service is a personal service that carries your

private messages. Area Information (AI) is a text message which is broadcast

to all subscribers in a certain network cell at the same time. The information

may be a local road report or a local taxi phone number.

Before you can receive any area information messages, you have to turn on

the Area information.

Sending and Receiving Text Messages (SMS)

To turn area information on/off.

1. Scroll to Mail, YES, Area info, YES.

2. Select On or Off and press YES.

You can now receive Area information messages, provided your network

operator supports this function.

Area Information Message Types

Each type of Area Information message is identified by a three-digit code. At

present, the following message types exist:

Code:

000

010

020

022

024

030

032

034

040

050

052

054

056

057

058

059

AI Message Type:

Index

Newsflashes

Hospitals

Doctors

Pharmacies

Long-distance road reports

Local road reports

Taxis

Weather

District (base station identity)

Network information

Operator services

Directory enquiries (national)

Directory enquiries (international)

Customer care (national)

Customer care (international)

Note! These codes are operator dependent. For information about the AI ser-

vices you can use, please refer to the information supplied by your network

operator.

Area Information Message List

You can decide which types of area information messages you wish to receive.

The phone’s “Area Info” list can hold up to 20 codes.

To insert an Area information code

1. Scroll to Mail, YES, Area info, YES.

2. Select Edit list and press YES.

The digits to the left indicate the position in the list. You can scroll for-

wards and backwards through the list with the LEFT and RIGHT keys.

Sending and Receiving Text Messages (SMS)

3. To insert a code, scroll to the first empty location, using the LEFT or

RIGHT key and press YES.

4. Enter the new code. (You only need to enter 40 for 040, since the phone

adds the leading zero automatically.).

5. Press YES.

To erase or replace a code

1. Scroll to Mail, YES, Area info, YES, Edit list, YES.

2. Select the code you wish to erase or replace and press YES.

The message Erase? appears.

3. If you want to erase this code, press YES.

4. If you want to replace the code, press the RIGHT key once, followed by

YES.

5. Enter the new code and press YES.

Receiving Area Information

When you receive an Area information message, the message is stored in the

phone memory, until you have read it or until you receive a new message.

Provided Area info is on, you can read the messages with the Area messages

function in the Mail menu.

To read an area message

1. Scroll to Mail, YES, Area messages, YES.

2. Scroll from one message to another by using the LEFT and RIGHT keys.

3. Press YES to select a message.

Sending and Receiving Text Messages (SMS)

Diverting Incoming Calls

If you want to make certain that your incoming calls are taken care of when

you are unable to answer them, you can use the Call Divert service to divert

them to another phone number.

The Call Divert service lets you:

•

divert calls if you are already on the phone – when busy.

divert calls that you do not answer within a specified time limit (operator

dependent) – no reply.

•

divert calls if the phone is turned off or if you are unreachable –

unreachable.

divert all incoming calls – all calls.

The divert option All calls means that all incoming calls are diverted to a

number specified by you. If you choose to divert all calls, an arrow l is shown

in the display.

Note! If you chose the All calls divert, all other diverts are automatically can-

celled. They are, however, activated again when you cancel the “All calls”

divert.

ACTIVATING CALL DIVERTS

1. Scroll to Divert, YES.

DIVERT

All Calls

(Off)

2. Select the divert you want (All calls, On busy, No reply and Unreachabl).

3. Select Activate, press YES.

4. Enter the phone number, including the area code, to which you want your

calls to be diverted and then press YES.

Note! If you used the divert option earlier and then cancelled it, an earlier,

recently used number to which the calls were diverted will be suggested. Press

and hold CLR if you want to erase this number and enter a new one.

There may be a short delay before the network responds. In the meantime, the

message Please wait is displayed. This is followed by the message On busy, All

calls, No reply or Unreachable

–

Divert ON, depending on which divert option you

choose. The divert number is also displayed.

The display informs you of a call divert each time you turn the phone on.

Diverting Incoming Calls

Diverting When the Data Menus Are On

If you have turned the Data menus on, you can set call diverts for your phone,

fax and data numbers respectively or for all three together. To divert, proceed

as described above.

For the fax and data numbers, there are only two divert alternatives:

•

all calls

unanswered

CHECKING THE DIVERT STATUS

1. Scroll to Divert, YES.

ALL CALLS

2. Select the divert you want to check and press YES.

3. Select Get status and press YES.

L Get status

The message Please wait appears, followed by either the phone number and

Divert ON if the call divert is on, or Divert OFF if it is not on.

To check the status of all call diverts

1. Scroll to Divert, YES.

2. Select Check all and press YES.

The message Please wait appears, followed by information about all call

diverts, i.e. whether they are on or not.

CANCELLING CALL DIVERTS

To cancel a certain call diverts

1. Scroll to Divert, YES.

ALL CALLS

2. Select the divert you want to cancel and press YES.

3. Select Cancel and press YES.

Cancel

The message Please wait appears followed by a message which informs you

that the call divert has been cancelled.

To cancel all call diverts

1. Scroll to Divert, YES.

2. Select Cancel all and press YES.

The message Please wait appears, followed by a message which informs you

that all call diverts have been cancelled.

Diverting Incoming Calls

Security for Your Phone

and Subscription

There are several ways to protect your phone and subscription from unauthor-

ized use. Anything from a simple keypad lock to full phone number control.

KEYPAD LOCK

The Keypad Lock feature helps you to avoid accidental dialling, which can

happen if you keep your phone in your pocket or attached to your belt. You

can choose between manual and automatic keylock.

An icon in the shape of a key (K) in the display informs you that the keypad is

locked.

Note! Calls to the international emergency number 112 can be made when the

keypad is locked. If the phone alarm rings, you can turn it off by pressing any

key.

The keypad remains locked until you:

•

answer an incoming call.

replace the battery.

unlock the keypad.

press the Push-To-Talk button (to enter the phone book menu)

To lock the keypad manually

Keylock

On?

•

Scroll to Keylock and press YES.

To unlock the keypad

Press LEFT followed by YES.

The keypad is unlocked.

The Automatic Keylock

Automatic keylock means that if no keys are pressed in 25 seconds, the key-

pad is locked.

To set the automatic keylock

1. Scroll to Settings, YES, Keylock, YES.

2. Select Auto and press YES.

KEYLOCK

Auto

Security for Your Phone and Subscription

To unlock the keypad

•

Press LEFT followed by YES.

The keypad is unlocked.

Note! The Keypad lock is always disabled if the phone is connected to vehicle

handsfree equipment.

THE SIM CARD LOCK

Most modern SIM cards are protected with a PIN (Personal Identity Number)

at the time of purchase. If the SIM card lock is activated, you have to enter the

PIN every time you turn on your phone.

The SIM card lock only protects your subscription and not your phone itself

from unauthorized use. If you change SIM card, the phone still works with the

new SIM card.

If Your SIM Card is Blocked

If you enter your PIN incorrectly three times in a row, the SIM card is

blocked. This is indicated by the message PIN Blocked Unblock? If this hap-

pens you need to unlock it to access your subscription.

Unblocking Your SIM Card

1. Press YES.

2. Enter your PUK (or PUK2 if the PIN2 is blocked) which you will find in

the information from your network operator.

3. Press YES.

Note! If your PIN starts with the same digits as the international emergency

number 112, they appear in the display when you enter your PIN.

Changing your PIN Code

1. Scroll to Access, YES, Change PIN code, YES.

2. Enter your old PIN (current) PIN code and press YES.

3. Enter your New PIN and press YES.

Enter

old PIN

4. At the prompt Repeat new PIN, enter your new PIN a second time and press

YES.

The message New PIN confirms that the PIN has been changed.

Note! If the message Matching error appears, this means you entered the

new PIN incorrectly. If the message Wrong PIN appears, followed by Enter

Old PIN, you entered your old PIN incorrectly.

Security for Your Phone and Subscription

Changing Your PIN2 Code

Depending on the network you use, some services require that you enter a sec-

ond PIN, the PIN2.

1. Scroll to Access, YES, Change PIN2, YES.

2. Follow the same procedure as described in “Changing your PIN Code”

above.

Turning On the SIM Card Lock

1. Scroll to Access, YES, Lock Card, YES.

2. Enter your PIN code and press YES.

The message Locked confirms that the card lock is now on.

Cancelling the SIM Card Lock

1. Scroll to Access, YES, Unlock Card, YES.

2. Enter your PIN code and press YES.

The message Unlocked confirms that the card lock is now off.

Note! This function only applies if your SIM card allows you to turn off the

card lock.

PHONE LOCK

The phone lock protects the phone against unauthorized use if it is stolen and

the SIM card exchanged. The Phone lock is not on when you buy the phone.

The default security code is 0000. You can change this code to any three- to

eight-digit code of your own choice.

The phone lock has two levels: Full lock and Autolock:

Full Lock

If the Full Lock is on, you briefly see the message Phone locked each time

you turn on the phone. The message is followed by the prompt Enter lock

code. You then have to enter a security code and press YES to be able to use

your phone.

Autolock

If the Autolock is on, the message Phone locked and the prompt Enter lock

code do not appear until a different SIM card is inserted in the phone. After

the security code has been entered correctly, the phone can be used with a new

SIM card. You are not asked to enter the security code until the original SIM

card or a different SIM card is inserted.

ACCESS

L Phone lock R

Change code

To change the security code

1. Scroll to Access, YES, Phone lock Change code, YES.

2. Enter your old code and press YES.

Security for Your Phone and Subscription

3. Enter your new code and press YES.

The message Repeat new code appears in the display.

4. Re-enter your new code and press YES.

The message New Code confirms that the code has been changed.

To lock/unlock the phone

1. Scroll to Access, YES, Phone lock, YES.

2. Select the setting you want (Full lock, Autolock or Unlocked) and press YES.

3. Enter the security code and press YES.

Phone Lock is displayed together with the new setting.

CALL BARRING

The Call Barring service of the cellular network allows you to bar different

types of outgoing and incoming calls. This means that you can restrict the use

of the phone.

Note! This service may not be available on all networks or may require a sep-

arate subscription.

The following calls can be barred:

•

all outgoing calls,

all outgoing international calls,

all outgoing international calls except to your home country,

all incoming calls,

all incoming calls when you are abroad (when roaming).

To ensure that a call bar is not changed by someone else, you need a password,

which comes with your subscription, in order to activate or cancel a call bar.

Changing the Call Barring Status

1. Scroll to Access, YES, Barring, YES.

2. Select the Barring option you want and press YES.

3. You now have three options:

BARRING

All outgoing

Calls

•

Activate, which turn a call bar on

Get status, which lets you check the status of a call bar

Cancel, which cancels the call bar

4. Confirm your selection by pressing YES.

5. Enter your password and press YES.

There may be a short delay before the network responds. In the meantime

the message Please wait is displayed. This is followed by a message which

informs you whether the call bar is on or not.

Security for Your Phone and Subscription

Note! If you divert incoming calls, see “Diverting Incoming Calls” on

page 62, you cannot activate some barring options. Likewise, if you bar calls,

you cannot activate some call divert options.

Cancelling All Call Bars

1. Scroll to Access, YES, Barring, YES, Cancel all, YES.

2. Enter your password and press YES.

BARRING

Cancel all

The message Please wait appears, followed by a message confirming that all

call bars have been cancelled.

Changing the Barring Password

The password for the Barring service comes with your subscription. You can

easily change the password as often as you like.

1. Scroll to Access, YES, Barring, YES, Change password, YES.

2. Enter the old (current) password and press YES.

3. Enter the new password and press YES.

4. Enter the new password a second time and press YES.

The message Please wait appears, followed by a message confirming that the

password has been changed.

FIXED DIALLING AND FIXED INCOMING CALLS

Fixed Dialling and fixed incoming calls is a way of restricting outgoing and

incoming calls.

Note! Fixed dialling and fixed incoming calls require a SIM card that sup-

ports the storing of fixed numbers. The fixed numbers are protected by the

PIN2.

The fixed dialling numbers and fixed incoming calls numbers are stored in a

list of fixed numbers on the SIM card. The fixed dialling numbers and the

fixed incoming calls numbers must be the same. You can however, turn each

function on or off independently.

•

The Fixed Dialling and Fixed incoming calls functions allow calls to be

made and received only to and from fixed numbers stored on the SIM card.

If you try to call other numbers, the message Number not permitted

appears in the display. If someone, who is not included in the Fixed incom-

ing numbers list, tries to call you, he or she will be rejected.

It is possible to store partial numbers, e.g. an area code, or an area code

followed by the first digits common to several numbers. Storing 0123456

allows calls to be made to and received from numbers from 012345600 to

012345699.

•

Security for Your Phone and Subscription

•

Numbers beginning with the international (+) sign and country code can

also be stored, allowing you to make and receive calls from abroad.

Numbers including question marks can be stored. For example storing

01234567?0 allows calls to be made to and received from numbers ending

with a zero from 0123456700 to 0123456790. To enter a question mark

press and hold the # key.

•

The maximum fixed numbers that can be stored depends on your SIM

card.

Note! The Fixed Dialling function does not prohibit calls to the international

emergency number 112 and the Service Centre of your network operator. Net-

work services such as Call Divert and Call Barring cannot be used.

To turn fixed dialling on or off

1. Scroll to Access, YES, Fixed dial, YES.

2. Enter your PIN2 and press YES.

3. Select On or Off and press YES.

ACCESS

Fixed dial

(Off)

To activate or cancel fixed incoming calls

1. Scroll to Access, YES, Fixed inco, YES.

2. Enter your PIN2 and press YES.

3. Select On or Off and press YES.

ACCESS

L Fixed inco

(Off)

To store fixed numbers

1. Scroll to Phone book, YES, Fixed numbers, YES, Store, YES.

2. Enter your PIN2 and press YES.

3. Enter the name (optional) and a fixed number(s) in the same way as when

storing an ordinary phone number.

Note! To be able to store fixed numbers, you need to activate the fixed dialling

function (see above).

To edit a stored fixed number

1. Scroll to Phone book, YES, Fixed numbers, YES.

2. Select Edit and press YES.

PHONE BOOK

Fixed

numbers

After you have entered the PIN2, you can change the position number, the

name or the fixed number in the same way as with an ordinary phone

number.

3. Press YES when you have finished editing.

Security for Your Phone and Subscription

Setting Network

Preferences

The Networks menu includes a number of functions which you can use to

determine how the phone searches for a network. You may also select a net-

work yourself from those within range.

SEARCHING FOR NETWORKS

When you turn on the phone, it searches for the last accessed network. If this

is not within range, you may use another network, provided your home net-

work has an agreement that allows you to do so. This is called roaming.

The order of preference in which the phone selects a network is determined by

a list of preferred networks on your SIM card. The Networks menu includes a

number of functions that let you determine how the phone searches for a net-

work. You may also select a network yourself from those within range.

SEARCH MODES

The phone has two search modes: automatic and manual.

Automatic Search Mode

The automatic search mode means that your phone first searches for the last

accessed network. If this is not available, the phone automatically searches for

another available network within range.

The Automatic search mode is normally the default setting when you buy your

phone.

To turn on automatic search mode

1. Scroll to Networks, YES, Searchmode, YES.

If Auto is visible in the bottom row of the display, your phone is already set

to Automatic search mode.

NETWORKS

L SearchmodeR

(Auto)

2. If Auto is not visible, press YES.

3. Select Auto and press YES.

The phone is now set to Automatic search mode.

4. To return to standby mode, press CLR.

Setting Network Preferences

Note! The order of preference in which the phone selects a network is deter-

mined by a list of preferred networks on your SIM card, which you can edit at

any time.

Manual Search Mode

The manual search mode means that your phone first searches for the last

accessed network. If this is not available, the question Select network?

appears.

To turn on the manual search mode

1. Scroll to Networks, YES, Searchmode, YES.

2. Select Manual and press YES.

NETWORKS

L SearchmodeR

(Manual)

3. To return to standby mode, press CLR.

To select a network, see below.

SELECTING A NETWORK

NETWORKS

1. Scroll to Networks, YES, Select net, YES.

2. If there is more than one network within range, scroll to the network you

want and press YES to select it.

Select net

Display Information

Instead of the full name of a country and a network, an abbreviation is dis-

played when you use the Networks menu. To see the full name of a network,

press *.

Together with the network name, you also get the following information in the

display:

The display shows...

meaning...

The network is currently being used.

Your home network is within range. You can use it.

Current

Home

The name of the network is included in a list of pre-

ferred networks on your SIM card. You can use this

network.

Preferred

The name of the network is included in a list of for-

bidden networks on your SIM card. You are not

allowed to use this network, except for emergency

calls.

Forbidden

The name of the network is not included in the pre-

ferred or forbidden list on your SIM card. You can

use this network.

Available

There is no network within range.

No network

Setting Network Preferences

To start an automatic network search

NETWORKS

New Search

•

Scroll to Networks, YES, New search, YES.

The phone automatically starts searching for a network according to the

list of preferred networks stored on your SIM card.

Forbidden Networks

The names of the forbidden networks are stored on your SIM card. If such a

forbidden network is within range, it is left out when the phone searches for a

network (automatic search mode).

If your home network and a forbidden network come to an agreement that

allows you to use the forbidden network, you can select this network even

though the message Forbidden is displayed.

LIST OF PREFERRED NETWORKS

You can create a list that defines in which order your phone selects a network

during automatic network selection, when your home network is not within

range.

The number of networks that can be stored in the list depends on your SIM

card.

The Edit list function lets you review the networks in the list. Apart from re-

arranging the order of the networks, you can add new networks to the list and

delete networks from it.

To review the list of networks

1. Scroll to Networks, YES, Edit list, YES.

NETWORKS

The message Please wait is displayed.

Edit list

The name of the first network is displayed. If a network is within range, a

‘

*’ is also displayed.

2. You can scroll through the other networks in the list using the LEFT and

RIGHT keys.

Note! To see a network’s full name, press *.

To add a network to the list

1. Scroll to Networks, YES, Edit list, YES.

2. Scroll to the first free position in the list and press YES.

The question Add net? appears in the display.

EDIT LIST

Network name

If you scroll to a position that is already occupied, you must press YES and

then scroll with the LEFT or RIGHT key until Add net? appears.

3. Press YES and scroll with the LEFT or RIGHT key until you find the net-

work you want.

Setting Network Preferences

4. If the desired network does not appear, press YES when the question Other?

appears. Then enter the three-digit country number and the two-digit net-

work number.

5. Finally, to add the network to the list, press YES.

To erase a network from the list

1. Scroll to Networks, YES, Edit list, YES.

2. Scroll to the network you wish to erase and press YES.

3. Select Erase and press YES.

EDIT LIST

Network name

Erase?

To re-arrange the list

1. Scroll to Networks, YES, Edit list, YES.

2. Scroll to the network you wish to move and press YES.

3. Select Move and press YES.

EDIT LIST

Network name

Move?

4. Enter the new position within the list and press YES.

Setting Network Preferences

Handling More than One

Call Simultaneously

Your phone allows you to handle more than one call simultaneously. This

means that you can put a call that is in progress on hold, while you make or

answer a second call, and then switch between the two calls.

You can also set up a Conference Call to have a joint conversation with up to

five people. You can put an individual or a group of conference members on

hold while you add other people to the conference call. You can also put con-

ference members on hold while you talk to someone privately. See “Confer-

ence Calls” on page 76.

CALL WAITING SERVICE

To be able to receive a second call, you must turn on the Call Waiting service.

To activate the Call Waiting Service

1. Scroll to Access, YES, Call Waiting, YES.

2. Select Activate and press YES.

CALL WAITING

Activate

There may be a short delay before the network responds. In the meantime,

the message Please wait is displayed. This is followed by the message Call

Waiting ON.

To cancel the Call Waiting Service

1. Scroll to Access, YES, Call Waiting, YES.

2. Select Cancel and press YES.

Tip! With the Get status option, you can check whether the call waiting ser-

vice is on or not.

MAKING A SECOND CALL WHILE A CALL IS IN

PROGRESS

1. Put the current call on hold by pressing YES.

The message 1 on hold is displayed.

2. Enter the number you wish to call or recall it from the phone book.

3. Press YES to make the call.

Handling More than One Call Simultaneously

RECEIVING A SECOND CALL WHILE A CALL IS IN

PROGRESS

If the Call Waiting function is on, you hear a tone in the earpiece if you

receive a second call and the message Call wait appears in the display. You can

do one of the following:

To end the current call and accept the waiting call

1. Press NO to end the current call.

The question Answer? appears.

2. Press YES to answer the waiting call.

To put the current call on hold and answer the waiting call

•

Press YES to put the current call on hold and answer the waiting call.

The message 1 on hold appears.

To continue the current call and reject the waiting call

Press 0 followed by YES.

The waiting call is cleared. If the caller’s network supports it, the caller

hears a busy tone.

Note! If “Divert On busy” is on, the waiting call is diverted to the number you

have specified.

WHEN ONE CALL IS ACTIVE AND ONE CALL IS ON

HOLD

When you have one active call and one on hold, you can do one of the follow-

ing:

To switch between two calls

•

Press YES to switch between the active call and the call on hold.

To end the active call

1. Press NO to end the active call.

The message Retrieve held call? appears and a beep sounds.

2. Press YES to return to the held call or press NO to end the held call.

Note! If you do not press YES or NO within three seconds, the message

Retrieve held call? disappears from the display. The held call is ended

automatically.

Tip! You can automatically end the current call and retrieve the held call by

pressing 1 followed by YES.

Handling More than One Call Simultaneously

To connect two calls – explicit call transfer

If you have one active call and one on hold, it is possible to connect the two

calls.

•

Press 4 followed by YES.

The two calls are now connected to each other, and you are disconnected

from both calls.

Note! This service may not be available on all networks. For more informa-

tion, please contact your operator.

RECEIVING A THIRD CALL

If the Call Waiting service is activated, you may receive a third call when you

have one active call and a second call on hold. You will hear a tone in the ear-

piece and the message Call Wait appears in the display. You can do one of the

following:

Only one call at a time can be on hold. If you wish to accept the third call, you

must end one of the existing calls.

To end the current call and accept the waiting call

•

Press 1, followed by YES.

The waiting call becomes active and the held call remains on hold.

To reject the waiting call

Press 0, followed by YES.

The third call is rejected. If the caller’s network supports this function, the

caller hear a busy tone.

Note! If Divert On busy is on, the waiting call is diverted to the number you

have specified.

CONFERENCE CALLS

Note! The Conference Call Service may not be available on all networks.

Please contact your operator for more information.

The Conference call service allows you to have a joint conversation with up to

five people. You may put an individual or a group of conference members on

hold while you add other people to the conference call. You may also put con-

ference members on hold while you talk to someone privately.

To set up a conference call

1. Call the first person you wish to include in the conference call.

2. Put this person on hold by pressing YES.

3. Call the second person you wish to include in the conference call.

Handling More than One Call Simultaneously

4. Press 3, followed by YES, to include the two people in the conference

call.

You can now put the conference group on hold and add a third person by

repeating steps 2 to 4. It is possible to add up to five persons in this way.

Note! In the display, the last called number is referred to as call number one,

the call before that number two etc.

If you wish to have a private conversation with one of the members, you can

put the other members on hold.

To have a private conversation

1. Press 2.

2. Press the number of the member you want to have a private conversation

with. For example, if you wish to talk to member number three, press 3.

3. Press YES.

To join the member to the conference call again:

•

Press 3 and then YES.

To release one of the members in a conference call

1. Press 1.

2. Press the number of the member you want to release. For example, if you

wish to release member number three, press 3.

3. Press YES to release the member.

Making a Call While a Conference Call is In Progress

You can put the conference group on hold and make another call. You can then

switch between the new call and the conference call.

To put the conference group on hold and make a new call

1. Press YES to put the conference call on hold.

2. Enter the number you wish to dial and press YES

To switch between the new call and the conference call

•

Press YES.

To end the new call and return to the conference call

Press 1 followed by YES.

To end a conference call

Press NO to end the conference call.

Handling More than One Call Simultaneously

Knowing the Call Time/

Call Cost

When you are on the phone, the display shows the duration of a call.

By using the Call info function in the Settings menu you can check the time

for all calls, both incoming and outgoing. You can also have the call cost or

the number of call units displayed by selecting the Cost option, provided your

network and your SIM card support this feature.

CALL INFORMATION

To set what call information you want to be displayed in the Info menu

1. Scroll to Settings, YES, Call info, YES.

2. Select Time:Outg, Time:All or Cost.

CALL INFO

L Time: outg

3. Confirm your selection by pressing YES.

Checking the Time or Cost of the Last Call

You can check the time/cost of the last incoming (or outgoing) call with the

Last call option in the Info menu.

To check time or cost of the last call

•

Scroll to Info and press YES.

INFO

Depending on the setting in the Call info function in the Settings menu,

you can use the navigation key to check:

Last call

1:23

•

The elapsed time of the last outgoing call.

The elapsed time of the last incoming call provided you have chosen

the Time:All option in the Call info function in the Settings menu.

To check the total time or call cost

Scroll to Info, YES, Tot calls.

•

Depending on the settings in the Call info function in the Settings menu,

you can check:

•

The elapsed time of all outgoing calls.

The elapsed time of all incoming and outgoing calls.

The cost (or the number of call units) of all incoming and outgoing

calls.

Knowing the Call Time/Call Cost

To reset the total call time/cost meter

1. Scroll to Info, YES Tot Calls, YES.

The message Reset? appears.

2. Press YES to reset the meter.

Note! If you choose the call cost option you must enter your PIN2 to reset the

meter.

DETERMINING THE CALL COST

This menu only appears if you have selected the Cost option in the Call info

function in the Settings menu, see below.

•

Scroll to the Info menu and select Price.

•

The Units option means that the number of call units is displayed

during a call, and in the Last call and Tot calls functions.

The Price function lets you enter and vary the price per call unit. The

price entered is stored on your SIM card.

To Enter the Price per Call Unit

1. Scroll to Settings, YES, Call info, YES.

2. Select Cost and press YES.

3. Press CLR to return to standby mode.

4. Scroll to Info, YES, Price, YES, Units, YES.

5. Enter your PIN2 and press YES.

INFO

Price

Units

The message INFO Price Units appears in the display.

6. Press YES.

7. Enter the code for the currency you want e.g. GBP for Pound Sterling, and

press YES.

8. Enter the price per call unit, for example 0.5, and press YES. To enter the

decimal point, press #.

9. Enter your PIN2 and press YES.

To Revert to Displaying Call Units

1. Scroll to Info, YES, Price, YES.

2. Press YES to select Units.

3. Press YES again to revert to displaying call units.

CREDIT LIMITS FOR CALLS

Provided both your network and your SIM card support this feature, you can

enter a total amount of money that can be used for making calls. This could be

useful when e.g. you, lend your phone to someone, and do not want their call

costs to exceed an amount specified by you. After a call is made, the cost is

Knowing the Call Time/Call Cost

deducted from this amount. When the amount reaches zero, no more calls can

be made.

To set a credit limit for calls

1. Scroll to Info, YES Credit unlimited, YES, New Credit, YES.

2. Enter the amount: for example, 30 pounds and press YES.

3. Enter your PIN2 and press YES.

CREDIT

L New credit

Knowing the Call Time/Call Cost

Using Two Phone Lines

If your subscription supports the Two line service, (also called Alternate Line

Service, ALS), you can have two different speech lines. This is useful feature

if e.g. you, want to use one number for your business calls and one for your

private calls.

The two line service may not be available on all networks and may require a

separate subscription. Please contact your network operator for more

information.

Note! You can only send and receive text messages (SMS) on line 1.

SELECTING A LINE

The line currently selected is indicated in the display with the letter ‘L’ and

the number for the selected line. For example, if line two is selected, you will

see ‘L2’ in the display.

Note! The menu Change to only appears if you are using the two line service.

To change to the line that is not currently selected

1. Scroll to Change to.

Change to

Line 2

2. Press YES to change to the line displayed in the bottom row.

From now on, all outgoing calls are made on the selected line. You can,

however, receive calls on both lines.

Tip! Instead of accessing the menu system, you can press and hold to change

line, provided the phone is in standby mode.

Receiving a Call on Line 1 or Line 2

When someone calls you, the question Answer? is replaced by Line1? or

Line2? depending on which line the person is calling.

Note! If you are engaged in a call on one line, you must end that call first

before answering a call on the other line.

DIFFERENT SETTINGS FOR EACH LINE

You can have different settings for each line: for example, the tone of the ring

signal, call diverts, call bars and call waiting function.

Using Two Phone Lines

The call meters in the Info menu show the call times (call costs) for the line

currently selected.

Changing the Name of the Two Lines

The phone allows you to personalize the names of the two lines. You might,

for example, want to call Line 1 “Private” and Line 2 “Work”.

To change the name of a line

1. Scroll to Settings, YES.

2. Select Line 1 Tag or Line 2 tag and press YES.

3. Enter the name (maximum twelve characters), using the numeric keys.

4. Press YES to confirm the new name.

Using Two Phone Lines

Calling Card or Credit

Card Calls

When making international or long distance calls, you may not want your

operator to charge you for these calls on your normal account. If you have a

credit card or a calling card, you may want to re-direct the charges to one of

those accounts instead. Your phone is all set for making this procedure as easy

as possible for you.

You can store two separate card numbers in your phone. These numbers are

protected by a four- to eight-digit security code that you choose yourself.

Note! The Calling card and Credit call feature is network dependent.

TURNING ON THE CALLING CARD FEATURE

To be able to make Calling cards call, you have to turn on this function.

To activate the calling card feature

1. Scroll to Access, YES, Call cards security, YES.

Enter code appears in the display.

2. Enter your security code (the factory set code is 0000) and press YES.

3. Scroll to Call cards and press YES.

4. Select On and press YES.

You can change the security code to a code of your own choice. The code can

consist of four to eight digits.

To change security codes

1. Scroll to Access, YES, Call cards security, YES.

2. Enter your security code (the factory set code is 0000) and press YES.

3. Scroll to Change code and press YES.

4. Enter your new code and press YES.

The code can consist of four to eight digits.

5. Confirm your new code when Repeat new code appears in the display and

press YES.

Your security code has now been changed.

Calling Card or Credit Card Calls

STORING CREDIT OR CALLING CARD NUMBERS

Your phone allows you to store two calling card numbers in the phone book

menu. This sub-menu is only visible if the Call card function is activated in

the Access menu.

To store a credit or a calling card number

1. Scroll to Phone book, YES, Call card, YES.

2. Enter your security code and press YES.

When you buy the phone the code is set to 0000. To change security

codes, see above.

3. Select card position (Card 1 or Card 2) using the LEFT and RIGHT keys and

press YES.

4. Enter the access number (the phone number) to the calling card server. The

numbers are entered in the same way as ordinary phone numbers.

5. Press RIGHT.

6. Enter the verification code to your calling card server.

7. Press YES to store the calling card number.

SELECTING A CARD

If you have two card numbers stored, you must select which card you wish to

use before making a Calling/Credit card call.

To select the card you want to use

1. Scroll to Phone book, YES, Call card, YES.

2. Enter your security code and press YES. (When you buy your phone the

code is set to 0000.)

3. Select the card you wish to use and press YES.

Your setting for the card appears.

4. Press YES to select the card.

MAKING A CREDIT OR CALLING CARD CALL

1. Enter the number you wish to dial, or retrieve it from the Phone book.

2. To set up the call as a Credit/Calling card call, press and hold YES.

The access number to the calling card server is called and during the connect-

ing phase, you are prompted to send the called number (the number or the per-

son you want to call) and the verification code, in the order chosen by you (see

above).

To send the called number and the verification code during the connecting

phase, press YES when the display shows Send, or wait a few seconds and

your phone sends them automatically.

Calling Card or Credit Card Calls

Sending and Receiving

Fax and Data calls

If you have a SIM card that does not support separate fax and data numbers,

you need to turn on the data menus. When you turn on the Data menus two

new menus appear; the menu, Speech then fax appears before the Info menu

when you scroll with the LEFT and RIGHT keys. The menu Next call type

appears after the Info menu.

Note! All fax and data calls are initiated from the appropriate computer soft-

ware.

To turn the data menus on or off

1. Scroll to Settings, YES, Data menus, YES.

The current status (On or Off) is displayed on the bottom row.

2. Select On or Off and press YES.

DATA MENUS

Off

NEXT CALL TYPE

This function allows you to decide which type the next incoming call will be,

i.e. fax, data, speech then fax or fax then speech. You only see this menu if

your phone detects that you do not have separate numbers for data, fax and

speech. Once you have set your phone for a specific incoming call, it stays

like this until you change it back. The normal setting is speech.

To set the phone for a certain type of call

1. Scroll to Next call type (the Data menus must be turned on) and press YES.

2. Select the type of call you are going to receive and press YES.

call type

Sending and Receiving Fax and Data calls

Some Useful Tools

ALARM

The phone has an alarm function. When it is on, an icon in the shape of a bell

(B) is shown next to the current time in the display.

The alarm rings at the set time even if the phone is turned off. The illumina-

tion of the keys and the display flash. The volume of the alarm signal depends

on the setting of the ring signal.

The alarm rings for 60 seconds and is repeated every nine minutes if you do

not turn it off. After 60 minutes, the repeat function is turned off.

To set the alarm

1. Scroll to Clock, YES, Set alarm, YES, New time, YES.

2. Enter the time in hours and minutes.

3. Press YES to confirm the alarm setting.

SET ALARM

(09:30)

_ –:– –

Note! If you choose the 12-hour format in the “Clock mode” function, you

can alternate between am and pm by pressing

To turn the alarm signal off

1. Press any key to turn the alarm off when it rings.

2. If you do not want the alarm to be repeated, press YES.

To turn the alarm off

1. Scroll to Clock, YES, Set alarm, YES.

2. Select Off and press YES.

CALCULATOR

The phone’s built-in calculator can add, subtract, divide and multiply.

To use the calculator

In this example we are going to divide 134 by 32.

1. Scroll to Calculator and press YES.

2. Enter 134.

L Calculator

3. Scroll with the LEFT or RIGHT key to the division sign (/), and press

YES.

4. Enter 32.

Some Useful Tools

5. Scroll with the LEFT or RIGHT key to the equal sign (=) and press YES to

get the answer.

You can also press # to get the answer.

6. To clear the display, press CLR.

To enter a decimal point

•

Press *.

To multiply

Press * twice.

Some Useful Tools

GSM PRO

GSM Pro 90

GSM Pro

Note! The features described in this chapter require a special subscription

that supports GSM Pro. For more information about GSM Pro, please contact

your network operator. Some network operators may choose to use a different

name for GSM Pro. For more information about GSM Pro, please see this

location on the web: http://www.ericsson.se/gsmpro.

The R250s PRO is the first mobile phone which supports GSM Pro. GSM Pro

is an extended feature of the GSM network which gives the user access to

most of the functions found today in various Private Mobile Radio (PMR) and

Public Access Mobile Radio (PAMR) networks.

With a R250s PRO and a GSM Pro subscription you get access to all the regu-

lar GSM network services and most PMR and PAMR services, such as group

calls, call monitoring and alert calls.

GROUP CALLS

Group calls allows all members of a specified group to be reached with a sin-

gle call. With a GSM Pro subscription, group calls are now available on the

GSM network.

In a group call, all participants can listen to and talk to each other. The group

call features and the Push-To-Talk mode give GSM Pro a walkie-talkie-like

function, that is a key feature for PMR and PAMR users.

A group number is a special number that makes it possible to call all group

members at the same time with a single call.

Push-To-Talk Mode

Group calls are preferably made and received in “Push-To-Talk mode”,

although group calls can be made and received in phone mode.

When you want to speak you press and hold the PUSH-TO-TALK button on

the left side of the phone, see “Overview” on page 4. When you finish talking

you release the PUSH-TO-TALK button, to let other group members speak.

When you release the Push-To-Talk button the microphone is muted. This is to

avoid disturbing background noise during a call.

GSM Pro

Mode Switch Selector

The R250s PRO has a mode switch selector on the right side of the phone, see

“Overview” on page 4, which you use to switch between phone and Push-To-

Talk mode.

When you switch modes the phone gives out a warning tone. You can switch

modes at any time: when the phone is in standby, when receiving a call and

during a call.

To switch between phone and Push-To-Talk mode

•

Slide the MODE SWITCH upwards to go to Push-To-Talk mode.

Slide the MODE SWITCH downwards to go to phone mode.

When you switch modes the phone sends out a warning signal.

Earpiece volume

When the phone is set to Push-To-Talk mode, the earpiece/loudspeaker vol-

ume increases significantly. You should not hold the phone close to your ear

as this may damage your hearing. Hold the phone in front of your face, about

10–30 centimetres away, and speak in the direction of the microphone.

To set the earpiece volume

1. Scroll to Settings, YES, Ear volume, YES.

EAR VOLUME

PUSHTOTALK

The current mode, Phone or Pushtotalk, is displayed on the middle row.

2. Use the LEFT arrow key to decrease the volume.

Use the RIGHT arrow key to increase the volume.

3. Press YES to confirm your setting.

LQQQQQQqqqR

Tip! During a call you can use the volume keys on the side of the phone to

adjust the volume.

GSM Pro

ALERT CALLS

The R250s PRO is equipped with an ALERT BUTTON, located on the top of

the phone next to the antenna. See “Overview” on page 4. Alert calls are eas-

ily made by pressing and holding the alert button for one second. If the call

cannot get through the phone automatically re-dials the number up to ten

times.

When you buy your phone the alert number is set to the international emer-

gency number 112. This number can be changed if you prefer another alert

number. This may be useful if e.g. you work in an area where your own organ-

ization’s rescue service can reach you faster.

For more information on how to change the alert number see “Alert Button”

on page 46.

PHONE BOOK

Note! The talk group numbers are provided by your service administrator. For

more information, please contact your service administrator.

The phone book makes it easy to set up a call to your talk groups. Instead of

having to remember the phone number and entering it by using the keypad,

you simply recall the number from the phone book by pressing and holding

the PUSH-TO-TALK button when the phone is in standby. When you find the

number you want to call, press YES to make the call.

The talk group numbers are stored in the same phone book as the one you use

for storing your own, personal phone numbers. See “Your Personal

Phone Book” on page 33. This means that you may not be allowed to store

your personal phone numbers in the memory positions used by your service

administrator. If you try to store a phone number in a position that you are not

allowed to use, you are prompted to store the number in another position. For

more information on how to store phone numbers see “Storing a Number

Together with a Name” on page 35.

MAKING AND RECEIVING GROUP CALLS

Making and receiving group calls is similar to making and receiving ordinary

mobile phone calls.

Note! We recommend that you set the phone to Push-To-Talk mode before you

make or receive a group call.

You can only call a group of which you are a member.

GSM Pro

To make a group call

1. Press CLR to go to standby (if you are not already in standby).

2. Press and hold the PUSH-TO-TALK button to enter the phone book menu

and find the number you want to call.

3. When you find the number, press YES to make the call.

The display shows Calling followed by Connecting.

The ringing tone is heard until a group member answers the call.

4. Press the PUSH-TO-TALK button to talk to the other group members.

5. Release the PUSH-TO-TALK button when you finish talking, to let other

group members talk.

6. Press NO when you want to end the call.

The call is ended and all group members are disconnected.

Note! You can also call a number by entering it on the keypad and then press

YES.

Making an Alert Call

1. Press and hold the ALERT BUTTON for one second.

The call is set up and the dialled number is shown in the display (the pre-

set number is the international emergency number 112.)

If the call cannot get through, the phone automatically re-dials the number

up to ten times.

2. Press NO to end the call.

Note! The alert button function must be on. If you change the pre-set alert

number (112), you must insert a SIM card and enter the PIN code (if the card

is locked). Otherwise the pre-set alert number (112) will be dialled and not the

number you have specified.

You can make an emergency call by dialling the number in the same way as

when making an ordinary call.

To make an emergency call

1. Enter 112 (the international emergency number).

2. Press YES.

The display shows Emergency.

3. Press NO to end the call.

Note! Some network operators may require that a SIM card has been inserted

into the phone and, in some cases, that a PIN code has been entered as well.

Some networks may not use the international emergency number 112.

GSM Pro

Receiving a Group Call in Push-to-Talk Mode

An incoming group call is answered automatically, the phone sends out a

warning tone and the voice of the calling party will be heard in the loud-

speaker.

Note! The phone must be set to Push-To-Talk mode to answer a group call

automatically. If the phone is set to phone mode, slide the mode switch

upwards to Push-To-Talk mode when you receive a group call. The call is then

answered automatically.

To receive a group call

1. The incoming group call is answered automatically, the phone emits a

warning tone and the voice of the calling party is heard in the loudspeaker.

•

The group call cannot be rejected by pressing NO.

2. If you want to speak press and hold the PUSH-TO-TALK button.

3. Release the PUSH-TO-TALK button when you finish talking.

4. Press NO when you want to leave the group call.

Note! If your GSM Pro SIM card has been programmed to “Auto answer all

calls”, all calls are answered automatically (provided the phone has been set

to Push-To-Talk mode). If the incoming call is an ordinary phone call, this

means that you have to press the Push-To-Talk button, or switch to phone

mode, to be able to talk to the other person.

If your SIM card has been programmed to “Auto Answer Group”, the proce-

dure for answering a call, may not work exactly as described above.

For more information on your SIM card settings, please contact your service

administrator.

Receiving a Group Call in Phone Mode

If you receive a group call and the phone is set to phone mode, you can do one

of the following:

•

Slide the MODE SWITCH upwards to Push-To-Talk mode to automat-

ically answer the call.

•

Press YES to answer the call in phone mode.

If you answer a group call in phone mode, the microphone will be open

during the whole conversation, i.e. you do not have to press the PUSH-

TO-TALK button when you are requested to answer.

Press NO when you want to end the call.

•

GSM Pro

Receiving an Ordinary Phone Call in Push-To-Talk Mode

If the incoming call is not a group call, i.e. the call is an ordinary phone call,

and your phone has been set to auto answer group, then the phone will ring as

normal. To answer the call do one of the following:

•

Slide the mode switch downwards to phone mode to automatically

answer the call.

•

Press YES to answer the call in Push-To-Talk mode.

If you answer the call in Push-To-Talk mode, you need to press the

PUSH-TO-TALK button when you want to speak to the person on the

other end of the line.

•

Press NO when you want to end the call.

Note! If your GSM Pro SIM card has been programmed to “auto answer all

calls”, an incoming phone call will be answered automatically. To be able to

speak to the person at the other end of the line, you need to press the Push-To-

Talk button or switch to phone mode.

DURING A GROUP CALL

During a group call you can listen to the conversation without having to press

any key. During a conversation you may receive a second call, if call waiting

is on, or you can put an ongoing call on hold and make a second call.

Call Monitoring

The call monitoring function allows you to listen passively, (provided the

phone is se to Push-To-Talk mode), to a group conversation, without having to

press any keys. This is a practical way of receiving information from other

group members while continue working.

Re-entry

If you are disconnected during a call, e.g. due to poor radio signalling or if you

voluntarily left the call, the re-entry function lets you re-enter the group call

by dialling the talk group number.

To re-enter a group call

1. Recall the number from the phone book or enter the number by using the

keypad.

2. Press YES to call the number and re-enter the ongoing call.

The other group members will be notified of you entering the call.

Making an Alert Call During an Ongoing Group Call

You can make an alert call during an ongoing group call. The R250s PRO will

disconnect the ongoing group call and connect to the pre-set alert number.

GSM Pro

To make an alert call during an ongoing group call

1. Press and hold the ALERT BUTTON for one second.

The call is set up and the number dialled is shown in the display.

2. Press NO to end the call.

Group Conversation Limit

The group conversation limit allows the service administrator to set a time-

limit for group calls. This is an useful feature if the initiator of the call should

forgets to end the call. Please contact your service administrator for more

information.

HANDLING MORE THAN ONE CALL

Your phone allows you to handle more than one call simultaneously. This

means that you can put a call that is in progress on hold, while you make or

answer a second call, and then switch between the two calls. See “Handling

More than One Call Simultaneously” on page 74.

GSM PRO WIRELESS DISPATCH CONSOLE

The GSM Pro Wireless Dispatch Console is an additional product for GSM

Pro users. A dispatch console located in an office e.g. makes it easy to com-

municate with and manage personnel in the field.

The Wireless Dispatch Console consists of a PC, dispatcher software, a

R250s PRO and a headset. The software runs under standard Windows 95/98/

NT operating system and can co-exist with other Windows programs. The

software supports ordinary phone calls, group calls, text messages (SMS) and

special display of alert calls.

As the name implies, the Wireless Dispatch Console requires no fixed tele-

phone lines for its operation and is therefore suited for both fixed and mobile

equipment.

For more information, please contact your GSM network operator.

GSM Pro

ADDITIONAL INFORMATION

Accessories 98

Troubleshooting ¹⁰²

Ericsson Mobile Internet ¹⁰⁴

Quick Keys ¹⁰⁵

Technical Data ¹⁰⁶

Glossary ¹⁰⁷

Guidelines for Safe and Efficient Use ¹¹²

Warranty ¹¹⁶

Declaration of Conformity ¹¹⁸

Index ¹¹⁹

Accessories

By using the phone with Ericsson original accessories, you get access to a

wide range of extra features, in addition to when the phone is used separately.

HANDSFREE CALLING

By using the Ericsson portable or car handsfree solutions, you can be on the

phone without using your hands to hold it. You can change the settings for the

handsfree-related functions so that they fit your own requirements.

Ericsson car handsfree, is specially designed to fit in with your car interior.

The car handsfree supports the functions of the mobile phone, making it easy

and convenient to be on the phone while driving.

Note! In some countries it is required that you use a vehicle handsfree solu-

tion, if you want to use your mobile phone while driving. Please check the

laws and regulations on the use of telephones in the areas where you drive.

Answering Mode

The menu Answering mode includes two functions: Any key and Auto,

which are useful when you use the phone with handsfree equipment.

•

The Any key function:

If you use the phone with handsfree equipment and this function is turned

on, you can answer an incoming call by pressing any key, except NO.

The Auto function:

If you choose the automatic answering mode, an incoming call is answered

automatically after one ring signal, if the phone is used with handsfree

equipment.

To select answering mode

1. Scroll to Settings, YES, Answering mode, YES.

2. Select Any key or Auto and press YES.

3. Select On and press YES.

SETTINGS

Answering

mode

Accessories

Other Handsfree-Related Settings

Apart from the settings mentioned above, each of the settings below can be

specified separately when you have your R250s PRO connected to handsfree

equipment and when you use the phone as a handheld unit:

•

Ring level

Earpiece volume

Ring type

Display light

This means that if you make one of these settings when the phone is

connected to handsfree equipment, the settings when it is handheld are not

affected and vice versa.

To change a setting

1. Connect the phone to the handsfree equipment.

2. Change the setting according to the instructions in the chapter “Personal-

izing Your Phone” on page 46.

DESK/WALL STAND

The desk/wall stand for the R250s PRO serves both as a charger and a holder

for the phone. When the battery runs low just place the phone in the desk/wall

stand to charge it (the charger must be connected to the desk/wall stand).

The desk/wall stand can be placed on e.g. a table or attached to the wall. The

desk/wall stand consists of two pieces that can be separated (see pictures).

You need to separate and rotate the two pieces to change between desk and

wall stand modes.

Connecting the charger

1. Place the desk/wall stand on a

table or attach it to the wall.

2. Connect the charger to the mains.

3. Connect the other end of the

cable to the desk/wall stand. The

flash symbol on the plug must

face upwards.

4. Place the phone in the desk/wall

stand to charge the phone.

Accessories

Desk

Wall

100

Accessories

101

Troubleshooting

This chapter lists some problems that you might encounter while using your

phone. Some problems require that you call your service provider, but most of

the problems you encounter are easy to correct yourself.

ERROR MESSAGES

Insert card

Insert

card

There is no SIM card in the phone. Insert a SIM card. See “The SIM Card” on

page 6.

Searching

16:21

If the message Searching remains in the display, you are within range of a

network but you are not allowed to use it. However, in an emergency, some

operators allow you to call the international emergency number 112. See

“Making and Receiving Calls” on page 19.

No network

There is no network within range or the received signal is too weak. You have

to move to get a signal that is strong enough.

Tip! You can also try to change to the longer, high gain antenna.

Wrong PIN, Wrong PIN2

Wrong

You entered your PIN incorrectly.

•

Enter the correct PIN or PIN2, and press YES.

Matching error

When you want to change a security code (for example PIN) you have to con-

firm the new code by entering it again. The two codes that you have entered

do not match. See “Security for Your Phone and Subscription” on page 64.

Enter

PIN Blocked. Unblock?

Blocked.

Unblock?

You entered your PIN incorrectly three times in a row. To unblock see “Secu-

rity for Your Phone and Subscription” on page 64.

Blocked Contact card provider

BLOCKED

Contact card

provider

You entered your personal unblocking key (PUK) incorrectly 10 times in a

row. Contact your network provider or service operator.

102

Troubleshooting

Phone locked

Phone

locked

The phone is locked. To unlock the phone, see “Security for Your Phone and

Subscription” on page 64.

Enter lock code

Your phone comes with the default security code, 0000. You can change it to

any three- to eight-digit personalized code. See “Security for Your Phone and

Subscription” on page 64.

Enter

lock code

No Indication of Charging

When the battery is totally run down and you start charging it, you get no

indication of charging.

THE PERSON AT THE OTHER END CAN NOT HEAR YOU

The phone is set to Push-To-Talk mode. Press and hold the Push-To-Talk but-

ton on the left side of the phone, when you want to talk to the person (or talk

group) at the other end. See “Overview” on page 4.

The microphone has a hole and if by chance water comes into the hole, your

voice may sound unclear to the receiver. To clear the water from the micro-

phone hole, hold the phone upright and tap on it repeatedly on the reverse

side.

PHONE DOES NOT COME ON

Handheld Phone

•

Recharge or replace the battery.

Handsfree Phone in Vehicle

•

Make sure that the phone is properly inserted into its holder.

Check the fuse.

Troubleshooting

103

Ericsson Mobile Internet

When you are on the move and in need of communication and information,

the Mobile Internet is the answer.

The Mobile Internet is a service supplied by Ericsson to make it easier for you

to communicate and receive information quickly, wherever you are. It gives

you access to various massaging services, on-line customer services, user

manuals and other useful information. With the Mobile Internet you can also

downed communications software to ensure you get the best out of your Eric-

sson products.

The Ericsson Mobile Internet address is

tap//mobile.ericsson.com/mobileinternet

104

Ericsson Mobile Internet

Quick Keys

Several keys on your phone can be used to optimize the phone’s functions and

decrease the number of times you need to press a key. Some of the key combi-

nations demand that your phone is in a certain mode and some can be made

from the standby mode.

The table below describes some of the most useful key combinations.

To…

Do this:

Mode:

mute the microphone

when on the phone

press and hold CLR.

If you are using a standard SIM

card you can also mute the

microphone by pressing the

Push-To-Talk button.

reject a call

when receiving a

call

Press NO or double-click on the

volume keys up or down.

quickly access phone

book

press and hold the Push-To-Talk when in standby

button.

answer a waiting call

and put an ongoing call

on hold.

Press YES

switch between an

active call and a call on

hold

during a call

Press YES

when in standby

quickly access voice

press and hold 1

mail

reach second letter

press and hold the upper vol-

when entering let-

ume key and press the desired ters

numeric key

reach third letter

press and hold the lower volume when entering let-

key and press the desired

numeric key

ters

speed dial

when in standby

press 1 – 9 and YES

move three lines forward

when reading a

message

press 3

return to beginning of

message

when reading a

message

press and hold LEFT arrow key

Quick Keys

105

Technical Data

General

Product name

System

R250s PRO

GSM 900/GSM1800

SIM card

Small plug-in card, 3V or 5V type, supports

GSM Pro SIM cards.

Type number

Battery

1100802-BV

4 Volt/1600mAh

Dimensions

Size

148 x 59 x 32 mm

Approx. 325 g

Weight with battery

Ambient temperatures

Max

Min

+55 C

-20 C

106

Technical Data

Glossary

Advice of Charge

(or AoC) enables you to monitor the cost of calls made from your mobile

phone. Details of the last call and total calls made are shown in the phone

display.

Area Information

(or AI) is a service that allows you to receive messages about pre-set topics

i.e. weather forecasts, road reports, etc. To use this service, it must be sup-

ported by your network.

Calling Line Identification

(or CLI) shows the number of the person calling you in your mobile phone

display. You can then make an informed choice as to whether or not to take the

call. Bear in mind that not all numbers can be displayed. To use this service, it

must be supported by your network.

Call Barring

enables you to restrict or bar certain or all types of calls to and from your

mobile phone, i.e. outgoing calls, outgoing international calls, incoming calls.

Barring is activated with a personal code. To use this service, it must be sup-

ported by your network.

Divert

enables you to forward calls to another number, for example your voice mail

or home phone.

DTMF or Touch Tone

Dual Tone Multi Frequency signal – codes sent as tone signals. Used for tele-

phone banking, for accessing an answering machine, etc.

Dual Band GSM 900/1800

The Ericsson R250s PRO is a dual band phone, which means that you can use

your phone on two different kinds of networks – the GSM 900 and the GSM

1800 (also called PCN or DCS 1800) systems.

A dual band phone that combines the two standards can use both frequencies.

This increases capacity in densely populated urban areas, and consequently

Glossary

107

improves the coverage offered by your network operator. It also offers you

enhanced international roaming, thanks to the additional networks now availa-

ble when you are out travelling.

The switching between the two systems is done automatically and seamlessly,

which means that you can use your phone without ever having to consider

which system is best at the time. This is taken care of by the networks. How-

ever, you should note that the functions offered and the network coverage dif-

fer depending on your choice of operator and/or subscription.

Enter

is used for keying in letters or numbers from the keypad.

Fixed Dialling Numbers

enables you to allow only numbers beginning with certain pre-defined num-

bers to be dialled from your mobile phone. The service is activated by PIN2.

To use this service, it must be supported by your network.

Fixed Incoming Calls

enables you to allow only numbers beginning with certain pre-defined num-

bers to be received on your mobile phone. The service is activated by PIN2.

To use this service, it must be supported by your network.

Full Duplex

in handsfree equipment means that both parties on the phone can talk at the

same time. The opposite is simplex mode when one party talks and the other

must wait for his/her turn.

Fax Class

Standards for fax transmission are set as classes. Class I and II allow data

transfer speeds of between 2400 to 9600 bps.

Group calls

Group calls allows you to call all members of a specified group with one sin-

gle call. Group calls requires a subscription which supports GSM Pro.

GSM 900

GSM is the world's most widely used digital network, now operating in over

100 countries around the world, particularly in Europe and Asia-Pacific.

The Global System for Mobile Communications is the most widely used dig-

ital mobile phone system. The GSM systems family also includes GSM 1800

and GSM 1900. There are different phases of roll-out for the GSM system and

GSM phones are either phase 1 or phase 2 compliant.

108

Glossary

GSM 1800

also known as DCS 1800 or PCN, is a digital network working on a frequency

of 1800 MHz. It is used in Europe and Asia-Pacific.

GSM Pro

GSM Pro is an extended feature of GSM which gives the user access to many

of the features found today in different Public Mobile Radio and Public

Access Mobile Radio networks, such as group calls, alert calls and call moni-

toring. GSM -Pro requires a special subscription.

International sign (+)

mobile phone (+) sign that automatically adds the correct international code in

front of a telephone number when dialling out of a country. You then have to

add the code of the country you are calling.

International Roaming

a mobile phone feature that allows you to switch between networks offering

coverage abroad. Your mobile phone automatically selects a network or sys-

tem (your home network), but if it is not in range or unavailable, it selects

another system. International roaming is based on agreements between net-

work operators in different countries.

Line 1/Line 2

see Two Line Service below.

Menu System

is the easiest way to access all the phone’s functions. The menus are arranged

to be accessed and viewed when scrolling with the arrow keys.

Network

a mobile phone network or system consists of a network of cells. A radio base

station serves each cell from which calls are forwarded to and received from

your mobile phone by wireless radio signals.

Operator

To be able to use your phone, you need a subscription to a network. You get

this subscription from a network operator, together with a SIM card that you

need to use with your phone.

Phone Book

a memory in your mobile phone where phone numbers can be stored and

accessed by name (alpha memory search) or position.

Glossary

109

Personal Identification Number – a code used for all GSM-based phones to

establish authorization for access to certain functions or information. The PIN

code comes with your subscription.

PIN2

Personal Identification Number 2 – an authorization code which is used only

for special services.

PUK

Personal Unblocking Code – used to unlock a blocked SIM card. This comes

with your subscription.

Push-To-Talk Mode

When the phone is set to Push-To-Talk mode, all calls are carried out in semi-

duplex. This means that the microphone is muted until the user presses a

“Push-To-Talk” button. This is a useful function to avoid disturbing back-

ground noise during a group call.

Roaming

Within your home network, this means that your mobile phone automatically

sets up communication procedures with different radio base stations when on

the move.

Semi-Duplex

In handsfree equipment, full duplex means that the connection is open for

both parties to talk simultaneously. The opposite, simplex, is when it is open

to one at a time. Semi-duplex gives close to, but not complete, duplex

functionality.

Service Provider

a company that provides services and subscriptions to mobile phone users.

Short Message Service

(or SMS) allows messages of up to 160 characters to be sent and received via

the network operator's message centre to your mobile phone. Messages are

stored if the phone is off or out of reach ensuring that they reach you. To use

this service, it must be supported by your network.

Scroll

pressing the left or right arrow key to move between the menus.

Select

scrolling to a menu then pressing the YES key on the phone.

110

Glossary

SIM card

Subscriber Identity Module card - a card that must be inserted in any GSM-

based mobile phone. It contains subscriber details, security information and

memory for a personal directory of numbers. The card can be a small plug-in

type or credit card-sized but both types have the same functions.

SMS

see Short Message Service above.

Subscription

is the contract that you have with the service/network provider. To use your

phone, you need to have a subscription to a network. You get a SIM (Sub-

scriber Identity Module) card with your subscription. The services included in

your subscription depend on your choice of operator and/or subscription. So

some of the services and functions described in this manual may not be acces-

sible to you. If you want a complete list of the services included in your sub-

scription, please contact your network operator.

Two Line Service

(also called Alternate Line Service, ALS) enables you to have two lines and

two different phone numbers on one subscription for your mobile phone. This

makes it possible to have separate numbers for business and personal calls. To

use this service, it must be supported by your network.

Glossary

111

Guidelines for Safe

and Efficient Use

GENERAL

Your mobile phone is a radio transmitter and receiver. When the phone is

turned on, it receives and transmits radio frequency (RF) energy. Depending

on the type of mobile phone you have bought, it operates in different fre-

quency ranges and employs commonly used modulation techniques. The sys-

tem that handles your call when you are using your phone controls the power

level at which your phone transmits.

EXPOSURE TO RADIO FREQUENCY ENERGY

The International Commission on Non-Ionizing Radiation Protection

(ICNIRP), sponsored by the World Health Organization (WHO), published a

statement in 1996 which sets limits for exposure to RF fields from handheld

mobile phones. According to this statement, which is based on the available

body of research, there is no evidence that mobile terminals meeting the rec-

ommended limits can cause any adverse health effects. All Ericsson tele-

phones conform to the ICNIRP recommendations and international exposure

standards, such as:

•

CENELEC European Pre-standard ENV50166-2

ANSI/IEEE C95.1-1992 (USA, Asia-Pacific)

If you want to limit RF exposure even further, you may choose to control the

duration of your calls and operate your phone in the most power efficient

manner.

EFFICIENT PHONE OPERATION

How to use your phone for optimum performance with minimum power

consumption:

•

In the Phone Mode, hold the phone as you would any other telephone.

While speaking directly into the mouthpiece, angle the antenna in a direc-

tion up and over your shoulder.

•

In the Speakerphone Mode, hold the phone in front of your face about 30 –

50 cm away and speak in the direction of the phone.

112

Guidelines for Safe and Efficient Use

•

In the Push-to-talk Mode, hold the phone in front of your face about 10 –

30 cm away and speak in the direction of the phone.

Do not hold the phone close to your ear while the phone is in Speaker-

phone or Radio Mode.

Do not hold the antenna when the phone is in use. Holding the antenna

affects call quality, may cause the phone to operate at a higher power level

than needed and shorten talk and standby times.

ANTENNA CARE AND REPLACEMENT

Do not bend the antenna since it is sensitive and this will reduce its

performance.

•

Do not use the phone with a damaged antenna. Take your phone to a qual-

ified service centre for repair.

Do not use an antenna designed for any other type of telephone than the

one you have bought. Unauthorized antennas, modifications, or attach-

ments could damage the phone and may violate the appropriate regulations

and will void the warranty and Ericsson can not guarantee the phone being

water resistant.

BATTERY

•

The phone is not water-resistant when the battery is removed.

Do not use the phone with a damaged battery. Use only the designated

Ericsson battery.

DRIVING

Check the laws and regulations on the use of telephones in the areas where

you drive. If you are going to use your mobile phone while driving:

•

Give full attention to driving.

Use handsfree operation, if available.

Pull off the road and park before making or answering a call if driving

conditions so require.

RF energy may affect some electronic systems in motor vehicles. In addition,

some vehicle manufacturers forbid the use of mobile phones in their vehicles.

Check with your vehicle manufacturer's representative to be sure that your

phone will not affect the electronic systems of your vehicle.

ELECTRONIC DEVICES

Most modern electronic equipment, for example equipment in hospitals and

cars, is shielded from RF energy. However, RF energy from telephones may

affect some electronic equipment.

Guidelines for Safe and Efficient Use

113

•

Turn off your phone in health care facilities when regulations posted in

the areas instruct you to do so.

Do not use your mobile phone near medical equipment without requesting

permission.

Mobile phones may affect the operation of some implanted cardiac pacemak-

ers, equipment for people with hearing impairments and other medically

implanted equipment. Pacemaker patients should be aware that the use of a

mobile phone very close to a pacemaker might cause the device to malfunc-

tion. Avoid placing the phone over the pacemaker, i.e. in your breast pocket.

When using the phone, place it at the ear opposite your pacemaker. If a mini-

mum distance of 15 cm is kept between the phone and the pacemaker, the risk

of interference is limited. Contact your cardiologist for more information.

AIRCRAFT

•

Turn off your phone before boarding any aircraft.

Do not use it on the ground without crew permission.

To prevent interference with aircraft systems, you must not use your phone

while the plane is in the air.

POWER SUPPLY

•

Connect AC (Power supply) only to designated power sources as marked

on the product.

•

Make sure the AC (Power Supply) is dry and clean before you plug it in.

To reduce risk of damage to the electric cord, remove it from the outlet by

holding onto the AC adapter rather than the cord.

•

Make sure the cord is located so that it will not be stepped on, tripped over

or otherwise subjected to damage or stress.

To reduce the risk of electric shock, unplug the unit from any power source

before attempting any cleaning, then use a soft, damp cloth.

BLASTING AREAS

Turn off your mobile phone when in a blasting area or in areas posted “turn

off two-way radio” to avoid interfering with blasting operations. Construction

crews often use remote control RF devices to set off explosives.

POTENTIALLY EXPLOSIVE ATMOSPHERES

Turn off your phone when in any area with a potentially explosive atmos-

phere. It is rare, but your phone or its accessories could generate sparks.

Sparks in such areas could cause an explosion or fire resulting in bodily injury

or even death.

114

Guidelines for Safe and Efficient Use

Areas with a potentially explosive atmosphere are often, but not always,

clearly marked. They include fuelling areas, such as petrol stations, below

deck on boats, fuel or chemical transfer or storage facilities, and areas where

the air contains chemicals or particles, such as grain, dust, or metal powders.

Do not transport or store flammable gas, liquid, or explosives in the compart-

ment of your vehicle, that contains your phone and accessories.

CHILDREN

Do not allow children to play with your phone since they could hurt them-

selves or others or accidentally damage the phone.

PRODUCT CARE

Although the phone is resistant to rain and running water, do not unnecessarily

subject the phone to water. If you need to wash your phone, it is recommended

that you do it gently in cold water under a water tap. Make sure that your bat-

tery is properly connected, the antenna is properly screwed on and that all

accessories are removed before you wash your phone. Do not use any deter-

gent or washing powder.

•

Do not immerse the product in water.

Do not expose your product to liquids other than water.

Do not expose your product to extreme temperatures.

Do not use any other accessories than Ericsson originals. Failure to do so

may result in loss of performance, fire, electric shock or injury, and will

void the warranty.

•

Do not attempt to disassemble the product. Doing so will void the war-

ranty. This product does not contain consumer serviceable components.

Service should be performed by Authorized Service Centres only.

The phone will not withstand dust, moisture or rain if the battery and/or

the antenna are not properly connected.

•

Removal of the battery, SIM card and antenna should be done under dry

conditions. Make sure that no moisture gets into the phone.

To avoid damaging the accessory, make sure that the phone is dry before

connecting the phone to any accessory.

Guidelines for Safe and Efficient Use

115

Warranty

Thank you for purchasing this Ericsson Product. To get maximum use of the

features of your new product we recommend that you follow a few simple

steps:

•

Read the Guidelines for safe and efficient use.

Read all the terms and conditions of your Ericsson Warranty.

Save your original receipt. You will need it for warranty repair claims.

Should your Ericsson Product need warranty service, you should return it

to the dealer from whom it was purchased or contact your local Ericsson

helpdesk to get further information.

OUR WARRANTY

Ericsson warrants this Product to be free from defects in material and work-

manship at the time of its original purchase by a consumer, and for a subse-

quent period of one (1) year.

All accessories for the Product are covered by a warranty for a period of one

(1) year from the date of its original purchase by a consumer.

WHAT WE WILL DO

If, during the warranty period, this Product fails to operate under normal use

and service, due to improper materials or workmanship, Ericsson subsidiaries,

authorised distributors or authorised service partners will, at its option, either

repair or replace the Product in accordance with the terms and conditions

stipulated herein.

CONDITIONS

1. The warranty is valid only if the original receipt issued to the original

purchaser by the dealer, specifying the date of purchase and serial number,

is presented with the product to be repaired or replaced. Ericsson reserves

the right to refuse warranty service if this information has been removed or

changed after the original purchase of the product from the dealer.

2. If Ericsson repairs or replaces the Product, the repaired or replaced Prod-

uct shall be warranted for the remaining time of the original warranty

period or for ninety (90) days from the date of repair, whichever is longer.

Repair or replacement may be via functionally equivalent reconditioned

116

Warranty

units. Replaced faulty parts or components will become the property of

Ericsson.

3. This warranty does not cover any failure of the Product due to normal

wear and tear, misuse, including but not limited to use in other than the

normal and customary manner, in accordance with Ericsson´s instructions

for use and maintenance of the Product, accident, modification or adjust-

ment, acts of God, improper ventilation and damages resulting from liquid.

4. This warranty does not cover product failures due to repair installations,

modifications or improper service performed by a non-Ericsson authorised

service workshop or opening of the product by non-Ericsson authorised

persons.

5. The warranty does not cover product failures which have been caused by

use of non-Ericsson original accessories.

6. Batteries are warranted only if battery capacity falls below 80% of rated

capacity. This warranty becomes void if the batteries are charged by non-

Ericsson original battery chargers.

7. Tampering with any of the seals on the products will void the warranty.

8. THERE ARE NO OTHER EXPRESS WARRANTIES, WHETHER

WRITTEN OR ORAL, OTHER THAN THIS PRINTED LIMITED

WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING WITH-

OUT LIMITATION THE IMPLIED WARRANTIES OR MERCHANTA-

BILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN

NO EVENT SHALL ERICSSON BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER,

INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMER-

CIAL LOSS. TO THE FULL EXTENT THOSE DAMAGES CAN BE

DISCLAIMED BY LAW.

Some countries do not allow the exclusion or limitation of incidental or conse-

quential damage, or limitation of the duration of implied warranties, so the

preceding limitations or exclusions may not apply to you. This warranty gives

you specific legal rights, and you may also have other rights which may vary

from country to country.

Warranty

117

Declaration of

Conformity

We, Ericsson Mobile Communications AB of

Nya Vattentornet

221 83 Lund, Sweden

declare under our sole responsibility that our product

Ericsson type 1100802-BV

to which this declaration relates, conforms to the appropriate standards

TBR 19, TBR 20, TBR31, TBR32, ETS 300 342-1 and EN 60950,

following the provisions of Teleterminals directive 91/263/EEC,

EMC directive 89/336/EEC, and Low voltage directive 73/23/EEC.

118

Declaration of Conformity

Index

Call barring 67

activate 67

cancelling 67

change password 68

Call cost 78

Alarm 86

Alarm indicator 17

Alert button 18, 21, 46, 92

turning on/off 47

Alert calls 21, 92, 93

Alert number 21

change number 47

Alternate Line Service (ALS). See

Two line service

Answering calls 22

Answering mode. See Handsfree

calling

Answering service. See Voice Mail

Antenna

Switching antennas 10

Area information 59

message types 60

checking 78

setting a credit limit 79

specifying price per unit 79

Call divert 62

activating 62

cancelling 63

checking status 63

divert indicator 17

Call forwarding. See Call divert

Call monitoring 95

Call restrictions. See Call barring

Call time 78

checking 78

Call waiting 74

Call waiting service 74

activating 74

receiving an area information

message 61

cancelling 74

Calling

Banking by phone 35

Barring calls. See Call barring

Battery 7

attaching 8

charging 9

from phone book 37

Calling cards 83

storing numbers 84

Calling Line Identification (CLI) 42

Calling someone back 42

release catch 5

removing 10

Battery charger 9, 99

Disconnecting the charger 9

Battery meter 17

Bell. See Alarm indicator

Belt clip 11

Calculator 86

Index

119

Calls 19

alert 21, 92, 93

answering 22

Earpiece 4

volume 24, 47, 91

Emergency calls 21, 93

Error messages 102

during 24

emergency 21, 93

group calls. See group calls

international 20

making 19

missed 42

putting on hold 75

receiving 22

re-dialling 20

reject 22

switching between two calls 75

unanswered 42

Card memory 33, 54

CB. See Area information

Cell broadcast. See Area information

Changing PIN 65

Changing PIN2 66

CLI. See Calling line identification

Clip

swivel clip 11

Clock. See Time

Conference call

adding new participants 76

releasing a participants 77

Conference calls 76

setting up 76

Credit cards 83

storing numbers 84

Fax, sending and receiving 85

Fixed dialling 68

turn on/off 69

Fixed incoming calls 68

turn on or off 69

Fixed incoming calls indicator 18

Fixed numbers

editing 69

storing 69

Forwarding calls. See Call divert

Greeting text in the display 50

Group calls 90

call monitoring 95

conversation limit 96

during 95

making 92

receiving 94

re-entry 95

GSM Pro 90

call monitoring 95

group calls 90

push-to-talk mode 90

wireless dispatch console 96

Data calls 85

Date

Handsfree calling 98

answering mode 98

Hiding your phone number 22

format 51

setting 51

Desk/wall stand 99

Display 4

greeting text 50

indicators 17

language 46

light 50

Icons in display. See Indicators in

display

Indicator light 4

text 30

Divert indicator 17

Diverting calls. See Call divert

DTMF tones 25

During a call 24

120

Index

Indicators in display 17

alarm 17

battery meter 17

fiexed incoming calls 18

keypad lock 17

line 18

Network 14, 70

no network 15

search modes 70

searching 14

selecting 71

Networks

signal strength 17

silent ring 17

forbidden 72

preferred 72

SMS 17

voice mail 17

Instructions in the manual 31

International calls 20

Phone book 33, 92

banking by phone 35

calling from 37

card memory 33

changing a name 39

changing a number 39

copying 39

Key functions 18

Key sound 49

Keypad 4

Keypad lock

lock 64

unlock 64

entering letters 34

erasing a phone number 36

keeping up to date 38

name recall 37

Keypad lock indicator 17

overwrite protection 36

phone memory 33

position recall 38

storing names 35

storing numbers 35

using the push-to-talk button 37

Phone lock 66

Language in display 46

Letters, entering 34

Line indicator 18

Lock keypad 64

autolock 66

Manual

change security code 66

full Lock 66

lock 67

unlock 67

Phone memory 33, 53

Phone number

instructions 31

Menu system 30

Message signal 49

Microphone 4

muting 24

Minute 49

displaying own 50

hiding 22

showing 22

Phone Number in SMS 58

PIN 7, 14

change code 65

PIN2 7

Minute minder 49

Missed calls 42

Mode switch 18, 26

Switching modes 26

switching modes 91

Muting microphone 24

change code 66

Plus sign (+) 18

Position recall 38

Preferred networks 72

PUK 7

Name recall 37

Index

121

Push-to-talk button 18

answering 90

calling 37, 90

speaking 90

Push-to-talk mode 90

Put a call on hold 75

SMS 53

card memory 54

composing a text message 54

enable the phone to send SMS 54

erasing 57

message types 56

phone memory 53

phone number in SMS 58

reading 56

Quick dialling. See Speed dialling

Quick keys

receiving 56

reply requested reply 57

replying 57

Reading text messages (SMS) 56

Receive Calls 22

request reply 55

sending 55

Receiving text messages (SMS) 56

Re-dialling 20

sending a text message 55

storing 58

Automatic Re-dialling 20

Rejecting calls 22

Reply Requested Reply 57

Request reply 55

Resetting phone 51

Restricting calls. See Call barring

Ring signal

validity period 56

SMS indicator 17

Speakerphone 26

switching modes 26

turn on 26

Speed dialling 38

Stored messages (SMS)

reading 59

choosing 48

composing own 49

level 16, 48

Storing

names 35

type 48

numbers 35

Switching between two calls 75

Switching modes 26, 91

Scratch pad 24

Scroll 18

Sending text messages (SMS) 55

Shortcuts. See Quick keys

Showing your phone number 22

Signal strength meter 17

Silent ring signal 17

SIM Card

Tape loops. See Voice mail indicator

Text messages. See SMS

Time 15, 51

format

setting

Tone signals 25

Touch tones 25

unblocking 65

SIM card 6

Turning the phone off 16

Turning the phone on 14

Two line service 81

changing names 82

selecting a line 81

settings 81

change PIN code 65

change PIN2 code 66

inserting 6

lock 66

unlock 66

Unanswered calls 42

Unlock keypad 64

122

Index

Vibrating Call Alert

turn on/off 48

Voice mail 44

activating 44

calling 44

Voice mail indicator 17

Volume

earpiece 24, 91

ring signal 48

Volume keys 4, 18

Index

123

Microsoft office home & student 2013 T5D01575 User Manual
Manhattan Computer Products 451123 User Manual
Kenwood CD Player KDC 448U User Manual
JVC CD Receiver KD G441 User Manual
Huawei Technologies Cell Phone U8650 1 User Manual
Emerson CKS3095S User Manual
Clarion DB135 User Manual
Califone CD102 User Manual
AT&T Multimedia Cell Phone User Manual
Antec SOLUTION SERIES SLK1650B User Manual