5" & 8" SKID STEER CHIPPERS
Turn Your Skid Steer Into A Mobile Workstation
Bear Cat’s line of skid steer chippers attach in
seconds and are driven solely by your skid steer’s
hydraulics. They are available in both standard/
high flow and high flow models and will make
short work of any troublesome debris.
An infinite number of hydraulic feed speeds
are available with a simple handle turn.
The chipper has two mounts, so it can be
set to feed in front or to the curb side.
A four-position manual valve easily
controls the hydraulic feed roller.
Model 74800
Model
74500
74800
Hydraulics
Feed Opening
Size
Chipper
Capacity
Feed
System
Chipper
Disc
Operating
Weight (Lbs.)
Standard or
high-flow**
5.5"x7"
3"*
5"*
hydraulic
hydraulic
20"x1.25"
140 lbs.
1145
1525
High-flow***
9"x9"
30"x1.25"
275 lbs.
*Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation
**Standard-flow requires a minimum of 15 gallons per minute (GPM) hydraulic oil flow
***High-flow requires a minimum of 25 GPM hydraulic oil flow
Built-in hydraulic jack makes feed roller
maintenance quick and easy.
8
|