Bosch Appliances GSM 908 User Manual

GSM 908  
User Guide  
GB  
IMPORTANT NOTICE  
SIM card limitations  
Network operators offer different kinds of services  
and different kinds of SIM cards. Please contact  
your network operator for further details.  
Depending on your type of SIM card some fea-  
tures described in this user guide may not be  
available to you or may not be operated in the way  
described. Where a feature relates to the network  
you will see this symbol  
in the user guide.  
The memory capacity of your SIM card may differ  
from one type of card to another.  
Batteries  
Never dispose of old batteries in your household  
refuse. Return them to the place of purchase or  
take them to a recycling centre so that they may  
be disposed of in an environmentally friendly  
manner.  
Accessories  
The use of other types of chargers, batteries or  
any accessories other than those recommended  
for use with this telephone will invalidate any  
approval given to this apparatus as well as the  
manufacturers warranty on the telephone.  
Care of your phone  
Do not try to open the phone as this might  
damage vital parts. The phone contains no com-  
ponents which can be repaired by the user. Any  
repair requires expertise and should be carried  
out only by an authorized service centre.  
To clean your phone, wipe over with a soft cloth.  
Do not use alcohol or other solvents as these will  
harm your phone.  
Do not use your mobile phone in high humidity  
environments or where the temperature falls  
below -10˚ or exceeds +55˚ C.  
4
CONTENTS  
Precautions . . . . . . . . . . . . . . . . Page  
Important notice . . . . . . . . . . . Page  
Keypad functions . . . . . . . . . . . Page  
Display symbols . . . . . . . . . . . . Page  
Before you start . . . . . . . . . . . . Page  
3
4
6
7
8
Tones setup . . . . . . . . . . . . . . . . Page 31  
Phone setup . . . . . . . . . . . . . . . . Page 32  
Message setup . . . . . . . . . . . . . . Page 34  
Phone book setup . . . . . . . . . . Page 35  
Call timers and charge . . . . . . Page 35  
Security . . . . . . . . . . . . . . . . . . . . Page 36  
Calculator . . . . . . . . . . . . . . . . . . Page 38  
Accessories . . . . . . . . . . . . . . . . Page 39  
Index . . . . . . . . . . . . . . . . . . . . . . . Page 44  
Making your first call . . . . . . . Page 10  
Options  
when in conversation . . . . . . Page 12  
Phone book . . . . . . . . . . . . . . . . Page 14  
Phone book editing . . . . . . . . Page 15  
Alternative phone books . . . Page 17  
List menu system . . . . . . . . . . . Page 18  
Outgoing calls . . . . . . . . . . . . . Page 19  
Answered calls . . . . . . . . . . . . . Page 19  
Missed calls . . . . . . . . . . . . . . . . Page 20  
Messages . . . . . . . . . . . . . . . . . . . Page 21  
Setup menu system . . . . . . . . . Page 24  
Call divert . . . . . . . . . . . . . . . . . . Page 26  
Call barring . . . . . . . . . . . . . . . . Page 28  
Call waiting . . . . . . . . . . . . . . . . Page 29  
Supplementary  
network services . . . . . . . . . . . Page 30  
5
KEYPAD FUNCTIONS  
LED (Status indicator)  
Earphone  
Slow green flash: Your phone is in contact with a  
network.  
Fast green flash: Indicates an incoming call.  
Slow red flash: Your phone cannot get in con-  
tact with a network.  
LED  
Fast red flash:  
The battery needs recharging.  
Side key  
On/off key  
Press the key for one second to switch your  
telephone on or off.  
Function keys  
with text line in display  
The function of each key varies according to  
whether you are in standby, menu or conversation  
mode. The text line at the bottom of the display  
will inform you of the actual function of each key  
at any time.  
Arrow keys  
In standby mode: Scroll through menus, phone  
book, lists, messages etc.  
In conversation mode: Volume up/down.  
Side key  
Same function as the arrow keys.  
Microphone  
Voice mail key  
Quick access to your voice mail.  
Key  
Key  
Inserts the "+" before international phone num-  
bers.  
Inserts a pause between the main number and the  
extension number.  
Last outgoing call  
Press for one second and the call is initiated  
automatically.  
6
DISPLAY SYMBOLS  
Introduction  
Speech call indicator  
Making a call  
Enter phone number. Press CALL  
Fax call indicator  
Data call indicator  
Answering a call  
The telephone rings. Press ANSWER  
SMS message indicators  
Ending a call  
There is a new message for you.  
Press END  
On: There are still unread messages.  
Flashing: The SMS memory is full.  
Back to standby mode  
Press EXIT  
The telephone automatically returns to stand-  
by mode when no key has been pressed for 60  
seconds.  
Voice mail indicator  
Indicates that there is a voice mail for you.  
Call divert indicator  
Battery level indicator  
On: All calls to your mobile telephone are diver-  
ted to another telephone number.  
See page 8 for more information.  
Flashing: Check the status of your call diverts.  
Signal strength indicator  
Microphone off indicator  
The stronger the signal (more signal bars  
displayed), the better the radio connection.  
Volume level indicator  
Indicates volume level when adjusting.  
List menu indicator  
Phone book indicator  
Scroll indicators  
Ring volume off indicator  
All-tones-off indicator  
See page 31 for more information.  
Shows you that there are more functions up  
or down which you can access. Also used  
for scrolling though the list menus.  
Calculator  
Survey of arithmetic operations in the calculator  
menu.  
Indicates which key to press to increase  
and decrease the volume level.  
Display and keypad backlighting  
The backlight switches on automatically when  
you press a key. In standby mode the light will  
automatically switch off if no key is pressed for  
10 seconds or more.  
7
BEFORE YOU START  
Insert rechargeable battery  
When changing the battery your phone should  
always be switched off.  
1
1
2
2
1
Insert  
Remove  
Charge the battery  
The battery supplied with this telephone is com-  
pletely discharged. The telephone will initiate  
charging as soon as you have inserted the charger  
plug. The battery takes 1 to 5 hours to become  
fully charged depending on type and size of the  
battery.  
To obtain optimum battery performance in daily  
use, wait until the battery is completely dis-  
charged, before recharging to full capacity.  
1
1
Battery level indicator  
2
During charging the battery symbols will flash on  
and off one after another continuously from the  
bottom of the display up. When the battery is fully  
charged all 4 symbols are permanently displayed  
as long as the phone is switched on.  
4 batteries:  
Battery is fully charged.  
1- 3 batteries: Battery is partly discharged.  
0 batteries:  
Battery needs recharging. You  
have limited conversation time  
left. At the same time the phone  
will emit a short warning tone and  
the LED on top of the phone will  
emit a fast red flash.  
If you insert another battery, this should be fully  
charged in order to read out the battery capacity  
accurately.  
8
BEFORE YOU START  
Insert SIM card  
Before you can make a call on your mobile  
phone you have to insert the SIM card.  
Should you have forgotten to insert the SIM card  
the telephone will ask you to do so.  
Before inserting the SIM card into the phone  
please make sure that any plastic remains from  
the frame punching have been removed.  
2
1
Switch off your phone and remove the battery if  
attached on the phone.  
1. Open the SIM card holder by sliding the  
catch to the left.  
3
2. Lift the holder.  
3. Insert the SIM card with its cut corner  
pointing up and left.  
4. Close the holder and slide the catch back  
into place.  
5. Insert the battery.  
6. Switch on the telephone.  
The phone will display a welcome greeting.  
4
7. Enter PIN code, if requested, and  
confirm by pressing OK  
The telephone will now start searching for your  
home network. When connection is successfully  
established, the name of your network operator  
will be displayed.  
If the telephone cannot get in touch with your  
home network it will start searching for another  
co-operating network.  
If the phone cannot establish contact with any  
network at all and you attempt to make a call, the  
display will show please redial later.  
9
MAKING YOUR FIRST CALL  
Selection of language  
The display language of your phone is normally  
the national language of the country in which you  
purchased your SIM card. If this is not the case the  
display language will be English. You have the  
option of choosing between different languages.  
If by mistake you select a language which you  
don't understand you can return to your own  
language by pressing the following keys:  
0000  
.
1. Press MENU  
2. Press 31  
3. Select language using  
4. Confirm by pressing OK  
5. Press EXIT  
Making your first call  
Calling  
Connected to  
+4596738000  
1. Enter the phone number you want to call.  
2. Press CALL to make the call.  
3. Press END to end the call.  
+4596738000  
END  
MENU  
END  
MENU  
If you call a phone number which is diverted to  
another phone number, the display will show the  
phone number to which you are connected and  
not the one entered by you.  
International calls  
When making an international call, enter "+" by  
pressing the  
-key for one second and then  
enter the relevant national code number before  
the telephone number (e.g. +45 for Denmark).  
10  
MAKING YOUR FIRST CALL  
Phone numbers with  
extension number  
Extension numbers can be dialled by entering a  
pause between the main number and the exten-  
sion number. To enter a pause, press the -key  
for one second until the pause code  
on the display.  
P
appears  
Emergency calls  
In most cases emergency calls can be made with  
or without a SIM card. To make an emergency  
call without a SIM card just enter the worldwide  
mobile phone emergency number 112, press  
SOS and confirm by pressing CALL.  
Answering a call  
Connected to  
+4596738000  
1. Press ANSWER when the phone rings.  
2. Press END to end the call.  
REJECT  
ANSWER  
END  
MENU  
Use the arrow keys  
and  
to increase and  
decrease the speaker volume.  
11  
O PTIO NS W HEN IN CO NVERSATIO N  
Your telephone supports the following network  
options: Having more than one conversation at a  
time, placing calls on hold, switching between  
calls, joining calls and transferring a conversation  
to another phone number.  
Muting the microphone  
While having a call, you may wish to have a pri-  
vate conversation with someone else. You will  
hear everything your caller says but you cannot  
be heard by the caller.  
How to proceed  
To switch off the microphone:  
1. Press MENU  
1. Press MENU when in conversation.  
2. Select Microphone off  
2. Select using  
either  
Microphone off  
Hold call  
To return to your telephone conversation:  
1. Press MENU  
Continue call  
Switch calls  
Drop active  
Join calls  
2. Select Microphone on  
Private  
Drop held  
Transfer call  
Phone book  
Send message  
3. Confirm by pressing OK  
Note: The status of the call determines which  
menu items are visible and available for you to  
select.  
Putting a call on hold  
You can make a second call without having to  
end a call that is currently active. Key in the  
second phone number and press CALL.  
The first call will automatically be put on hold.  
Please be aware that you can only have one call  
on hold at a time. You can also put calls on hold  
manually by selecting Hold call.  
Continuing a call  
When you want to retrieve the call put on hold,  
just select Continue call.  
12  
KEYPAD LOCK  
Switching between calls  
How to lock the keypad  
If you select Switch calls, the active call  
will be put on hold and the call on hold will now  
be active. In this way you can switch between  
your conversations.  
To avoid making calls accidentally you can lock  
the keypad.  
1. Press MENU  
Ending an active call while another is on hold  
An active call can be ended by selecting  
Drop active. The held call will remain on  
hold and you have to retrieve it to continue con-  
versation.  
2. Press  
If you try to activate one of the keys, the display  
will tell you that the keypad is locked.  
Joining calls  
How to unlock the keypad  
If you have an active call and a call on hold at the  
same time, you can select Join calls to  
enable all of you to speak together.  
The keypad lock is automatically disabled  
– during an incoming call until you have finished  
your conversation  
– when the telephone is placed in the hands-free  
car installation kit  
Having a private call while others are on hold  
If you have joined all calls and want to have a  
private conversation with one of the callers,  
select Private. The other calls will be put on  
hold.  
1. Press UNLOCK  
2. Press  
Ending a call put on hold  
You can end the call put on hold by selecting  
Drop held.  
Transferring a call  
If you have an active call and a call on hold you  
can transfer the call without breaking the con-  
nection by selecting Transfer call so that  
the other parties can continue speaking to each  
other.  
Calling a number in the phone book  
During a conversation you can make a new call  
to a number stored in your phone book by  
selecting Phone book.  
Sending an SMS message  
If you want to send a message to a third party  
select Send message.  
13  
PHONE BOOK  
You can store names and telephone numbers in  
a phone book. The entries are stored on the SIM  
card and the number of entries is dependent on  
the capacity of the SIM card.  
How to store a name  
and a telephone number  
If you enter the phone number with the help of  
"+" followed by the national code you can use  
your phone book abroad without having to think  
about international codes.  
The length of a name or a telephone number de-  
pends on your SIM card.  
There are several characters available on each  
key, as shown in the table below. Press once to  
get the first character, twice to get the second  
character, and so on. When you need a space  
between two characters, press  
1. Enter the phone number.  
2. Press  
3. Enter name and press OK  
Holding down one of the keys for one second will  
give you the option of lower case. Just press the  
key again for one second to return to upper case.  
The telephone will suggest that the name/number  
should be stored under the first vacant location  
number.  
4. Confirm the location number by  
pressing OK  
P Q R S 7 ß  
Π Φ Ψ Σ  
1 . , ; : ’ ” ! ¡ ? ¿  
& % £ $ ¥ @ § ¤  
p q r s 7 ß  
A B C 2 Æ Å Ä Ç  
a b c 2 æ å ä à  
T U V 8 Ü Θ  
t u v 8 ü ù  
How to select your own  
location number  
D E F 3 É  
W X Y Z 9 Ξ  
d e f 3 é è  
w x y z 9  
If you do not want to store the entry under the  
suggested location number, you can select a  
number of your own choice. Store frequently  
used numbers in location numbers 1 to 9 so that  
you can speed dial them by pressing only one  
key (see page 15).  
G H I 4 Γ  
* +  
g h i 4 ì  
V
J K L 5  
j k l 5  
0- / ( ) = < >_  
Space #  
M N O 6 Ø  
Ñ Ö Ω  
m n o 6 ø ñ ö ò  
1. Store telephone number and name as  
described previously in steps 1. to 3.  
How to edit a name and a phone  
number  
2. Press CLEAR and enter a location  
number of your own choice (up to 3 digits).  
Press CLEAR briefly  
3. Confirm by pressing OK  
– one character will be deleted  
Press CLEAR for one second  
If you choose a location number that is occupied,  
the phone will give you the option of overwriting  
the existing entry. If you do not want to overwrite  
the existing entry, press EXIT and the location  
number suggested will be visible again.  
– the entire display will be deleted  
14  
PHONE BOOK EDITING  
If the location number consists of more than 1 di-  
git, press the first digit(s) and hold the last digit for  
one second.  
Voice mail number  
If you have a voice mail number stored in your  
phone book this should be stored under loca-  
tion 1. On some networks this has already been  
done by the operator. Contact your network  
operator for further details on how to activate  
your voice mail.  
2. The call will automatically be initiated.  
How to edit a name  
or a telephone number  
How to find a name  
1. Press  
to enter the List menu system.  
and a telephone number  
2. Select Phone book and press  
1. Press  
SELECT  
2. Enter one or more letters of the name  
you wish to find.  
3. Select Edit entry and press OK  
4. Enter one or more letters of the entry  
you wish to edit or select it by using  
3. The name and telephone number will be  
displayed.  
5. Press EDIT  
If there is more than one name matching the en-  
tered letters, use the arrow keys to scroll through  
to find the required name.  
6. Change the number using CLEAR  
7. Enter the correct phone number.  
8. Confirm the change by pressing OK  
If there is no name to match the entered letters,  
the display gives you the best match in the  
phone book.  
9. Change name and location number in  
the same way, if necessary.  
4. Press CALL to make the call.  
How to delete a name and  
a telephone number  
When making a call the name will be shown on  
the display. If the entry has no name the tele-  
phone number will be displayed.  
1. Press  
to enter the List menu system.  
2. Select Phone book and press  
SELECT  
Speed dialling  
3. Select Delete entry and press OK  
It is possible to make calls to any number stored  
in the phone book more easily by using the loca-  
tion number (up to 3 digits).  
4. Enter one or more letters of the entry  
you wish to delete or select it by using  
To be able to use the speed dialling function it  
must be switched on (see page 32).  
5. Press DELETE  
6. Reconfirm by pressing OK  
1. Press the location number for one second.  
15  
PHONE BOOK STATUS /  
PREFIX TELEPHONE NUMBERS  
How to see the status of your  
Prefix telephone numbers  
phone book  
In your phone book you can store prefix phone  
numbers and add additional digits to these.  
A useful feature if for instance you often call a  
company with a switchboard with direct dialling  
facility.  
The telephone can display the total number of  
locations on your SIM card and inform you how  
many of these are free.  
1. Press  
to enter the List menu system.  
How to enter a prefix telephone  
number  
2. Select Phone book and press  
SELECT  
1. Enter the prefix digits of the telephone  
number.  
3. Select Status and press OK  
2. Hold down the -key for approx. 2  
seconds, and you will see a  
display.  
W
on the  
3. Repeat, holding down the -key for each  
character you wish to add to the prefix  
number.  
4. Press  
5. Enter name and location number  
and press OK  
How to call a prefix telephone  
number  
1. Press  
2. Find the number you wish to call in your  
phone book.  
3. Press CALL  
4. Enter the actual digits to replace the  
W
5. The call will automatically be initiated.  
16  
ALTERNATIVE PHONE BOOKS  
Depending on your SIM card you may have diffe-  
Own numbers  
rent alternative phone books. These phone books  
will be visible in the phone display only if they  
are available and enabled.  
Some networks offer the possibility of having  
more than one phone number on the same SIM  
card. For instance one for normal conversations,  
one for fax and one for data transmission.  
Fixed numbers  
This sub menu operates in the same way as the  
ordinary phone book menu giving you the possi-  
bilities of finding, adding, editing and deleting the  
entries.  
With the help of this alternative phone book you  
can restrict the use of your phone only to num-  
bers stored in this special phone book. This tele-  
phone book operates in exactly the same way as  
your ordinary phone book.  
However, in order to be able to make such a  
phone book you need to have a PUK2 code from  
your network operator and to use a PIN2 code of  
your own choice.  
See on page 35 under Phone book setup how to  
make use of fixed numbers.  
Service numbers  
This phone book contains customer care, hotline  
service numbers, etc. Your network operator de-  
fines the numbers stored in this phone book and  
the contents cannot be changed by you.  
Barred numbers  
In this phone book you can store numbers to  
which you do not allow any calls. This phone  
book operates in exactly the same way as your  
ordinary phone book.  
In order to be able to make such a phone book  
you also need to have a PUK2 code from your  
network operator and to use a PIN2 code of your  
own choice.  
See page 35 under Phone Book Setup how to  
make use of barred numbers.  
17  
LIST MENU SYSTEM  
Information about outgoing, answered and missed  
calls as well as SMS messages are automatically  
stored in lists:  
How to access  
the List menu system  
1. Press  
Outgoing calls  
2. Select the menu you want to access  
View names/phone numbers of your latest  
outgoing calls  
by using  
or  
3. Confirm by pressing SELECT/OK  
4. Select the sub menu you want to access  
Answered calls  
using  
and press SELECT/OK  
View names/phone numbers of your latest  
answered calls  
Back to standby mode  
Missed calls  
While you are in menu mode, pressing EXIT  
briefly will bring you one level up in the system.  
Holding EXIT will always bring you to the  
standby mode.  
View names/phone numbers of you latest calls  
received but not answered  
Phone book  
The telephone automatically returns to standby  
mode when no key has been pressed for 60 se-  
conds.  
Find, add, edit or delete entries  
Phone book status  
Fixed number phone book  
Find, add, edit or delete entries  
Phone book status  
Service number phone book  
Find entries  
Barred number phone book  
Find, add, edit or delete entries  
Phone book status  
Own numbers  
Find, add, edit or delete entries  
Messages  
Inbox for received point-to-point messages  
Outbox for sent point-to-point messages  
Favourite messages  
Send messages  
Read broadcast messages  
18  
OUTGOING CALLS / ANSW ERED CALLS  
Outgoing calls  
Who is calling?  
Your phone has memory for your last 10 dialled  
telephone numbers.  
Calling Line Identification (CLI) is a network  
feature whereby the phone numbers of callers  
to your phone are shown on your phone's display.  
If your caller is one of the entries that you have  
stored in your phone book, then his name will  
appear on your display.  
How to see the list  
of last outgoing calls  
1. Press  
to enter the List menu system.  
To enable the telephone to identify the calls it is a  
condition that the network supports Calling Line  
Identification.  
2. Select Outgoing calls and press OK  
3. Scroll through the telephone numbers.  
4. When the telephone number you wish  
to redial is displayed, press SELECT  
Answered calls  
Your phone remembers the last 10 calls your  
phone has received.  
5. Press CALL to initiate the call.  
How to see the list  
of answered calls  
Shortcut to your last outgoing call  
However, to use this facility you must enter the  
Phone setup menu and select  
1. Press  
to enter the List menu system.  
Speed dialling on (see page 32).  
2. Select Answered calls and press OK  
1. Just press 0 for one second and the  
3. Scroll through the telephone numbers.  
call is initiated automatically.  
4. When the telephone number you wish  
to redial is displayed, press SELECT  
5. Press CALL to initiate the call.  
19  
MISSED CALLS  
Missed calls  
How to copy a phone number from  
one of the lists into your phone book  
Your phone remembers the last 10 incoming calls  
which you did not answer.  
1. Press  
to enter the List menu system.  
The display will tell you how many missed calls  
your phone has received. If, for instance, there are  
15 missed calls the standby display will show  
2. Select the actual menu and the phone  
number you wish to copy into your  
phone book.  
.
15.  
3. Confirm by pressing SELECT  
As the telephone registers only identified calls in  
the list, the number of missed calls shown on the  
display and the number of phone numbers actu-  
ally listed may be different.  
4. Press  
to access your phone book.  
5. Give the number a name and a location  
number and press OK  
Immediate access to the list of  
missed calls  
How to delete call information  
You can delete all entries stored in the Outgoing,  
Answered and Missed calls lists. Select the sub  
menu Delete call information in the  
Phone book setup menu and select the list which  
you want to delete.  
1. Press  
2. Scroll through the telephone numbers  
using  
or  
3. When the telephone number you wish  
to dial is displayed, press SELECT  
4. Press CALL to initiate the call.  
How to see the list of missed calls  
at a later moment  
As soon as you have used the list, either to make  
a call or to view numbers, the  
symbol will  
disappear from the display. However, the list will  
always be available through the List menu system.  
1. Press  
to enter the List menu system.  
2. Select Missed calls and press OK  
The telephone number will be deleted from the  
list as soon as you have called it, but you can  
always find it again in the list of last outgoing  
calls.  
20  
MESSAGES  
In addition to reading the message, you can either  
Short Message Services (SMS)  
Your phone can receive and send short text mes-  
sages via the network. On some networks you  
have to subscribe to this facility.  
– delete it  
– send a reply  
– forward it to another phone number  
– edit it before sending  
– extract a phone number, if any, from the mes-  
sage to call or to store in your phone book  
– call back to the sender  
There are two types of messages: point-to-point  
messages which you can both receive and send,  
and cell broadcast messages which you can only  
receive.  
1. Press OPTION  
Point-to-point messages  
2. Select the option you wish to enter  
and confirm by pressing OK  
A new incoming message will be indicated by the  
SMS indicator  
on the standby display, as well  
as by a message tone (if enabled – see page 31).  
The display will also inform you how many new  
messages there are for you.  
3. The display will guide you through  
the next steps.  
When a message has been read it will be indi-  
cated by a to the left of the date of receipt.  
How to read a new message  
The SMS indicator  
display as long as there are unread messsages.  
remains on the standby  
1. Press  
to access the messages.  
The display will show date and time of receipt  
of each individual message.  
Delete messages  
If the SMS indicator  
that the message memory is full.  
is flashing, it indicates  
2. Select the message you want to read by  
means of  
or  
and confirm by  
pressing SELECT  
You can delete all messages stored either in the  
Inbox or the Outbox at the same time.  
The phone number of the message sender will be  
displayed in front of the message. You can now  
scroll through the message by using the arrow  
keys.  
1. Enter the sub menu  
Delete messages  
2. Confirm by pressing OK  
The message is automatically stored in the inbox  
if you do not delete it.  
21  
MESSAGES  
How to read a message again  
4. End your message by pressing OK  
1. Press  
to enter the List menu system.  
5. Select whether you wish to  
Send message  
2. Select Messages and press SELECT  
at once or whether you wish to  
Save message  
3. Select Inbox by pressing OK  
for sending it later on.  
4. Scroll through the list of messages and  
confirm your choice by pressing SELECT  
6. Confirm your choice by pressing SELECT  
Having selected Send message the phone  
will ask for a phone number to send the message  
to. Either enter a phone number or select one  
from your phone book using  
How to send a message  
Before you can send a message you have to enter  
your network operator's telephone number for  
this special service. Contact your network opera-  
tor to obtain this number. On page 34 you can see  
how you enter this special phone number and  
how to select validity period, transmission format  
etc. once for all. If you do not specify these para-  
meters in the Setup menu system you will be  
asked for a specification each time you wish to  
send a message.  
The message is automatically stored in Outbox  
under Messages in the List menu system.  
Favourite messages  
Your phone contains a list of frequently  
used messages, e.g.  
The meeting .. is moved to ..  
You only need to insert name, place or time in the  
empty spaces. You may also add or delete words,  
as required.  
1. Press  
to enter the List menu system.  
2. Select Messages and press SELECT  
3. Select New message by pressing OK  
1. Press  
to enter the List menu system.  
2. Select Messages and press SELECT  
Start entering your message using the keypad in  
the same way as you enter a name or a tele-  
3. Select Favourites and press OK  
phone number in the phone book.  
moves the  
4. Select the message you want to use and  
confirm by pressing SELECT  
cursor to the left, moves the cursor to the  
right. Delete unwanted characters by pressing  
CLEAR.  
The cursor automatically points at the first empty  
space. Once you have filled this in, you can move  
the cursor to the next empty space simply by  
pressing NEXT. The cursor can also be moved  
If you want to use the -symbol in your SMS  
message press the -key briefly twice.  
forward and backward by pressing  
respectively.  
or  
5. Complete the message by pressing OK  
6. Send the message, or save it for later use.  
22  
MESSAGES  
How to edit an old message  
Cell broadcast channel list  
To be able to receive cell broadcast messages you  
have to set up a list of the channels from which  
you want to receive information. See page 34 for  
how to set up this list and to specify what kind of  
information you wish to receive.  
1. Press  
to enter the List menu system.  
2. Select Messages and press SELECT  
3. Select Inbox, Outbox or  
Favourites by pressing OK  
4. Select the message you wish to edit  
and confirm by pressing SELECT  
How to read a cell broadcast message  
A cell broadcast message is scrolled twice on  
the display at the time of reception. If you don’t  
see it at that time, you can read it via the List  
5. Press OPTION  
6. Select Edit message and press OK  
menu system by pressing  
, selecting  
Messages and then Broadcasts.  
A digit between the scroll indicators on the  
display indicates the number of the individual  
messages.  
The display will show the Broadcast ID number  
and you can thus identify the kind of message  
received. Messages are read in exactly the same  
way as Point-to-point messages. A read message  
will be marked by .  
Cell broadcast messages  
To select whether you want the cell broadcast op-  
tion to be on or off you must enter the Message  
setup menu and select Broadcast setup  
(see page 34).  
In addition to reading the message, you can either  
– delete it  
– store it on your SIM card  
These are general messages broadcast to a group  
of telephones and are available to network sub-  
scribers only. Cell broadcast messages are typi-  
cally local weather and traffic reports, stock mar-  
ket prices, sports results etc. If you have selected  
Roaming, i.e. if you are abroad and connected to  
a foreign network (see page 28), you may be able  
to receive cell broadcast messages from other net-  
works, too.  
– forward it to another phone number  
– extract a phone number, if any, from the mes-  
sage to call or to store in your phone book  
1. Press OPTION  
2. Select the option you wish to enter and  
confirm by pressing OK  
3. The display will guide you through the  
next steps.  
The messages are transmitted in numbered chan-  
nels and in general each channel will contain in-  
formation of the same type. Cell broadcast mes-  
sages may be sent out in different languages.  
Contact your network operator for further details.  
A cell broadcast message will be deleted when  
you switch off your telephone – even if the mes-  
sage has not been read.  
23  
SETUP MENU SYSTEM  
The setup menu system offers you the possibility  
of setting the individual sub menus and options  
according to your own personal wishes.  
Phone book setup (Menu 5)  
51 Fixed dialling on/off  
52 Barred dialling on/off  
53 Phone book sorting  
54 Delete all entries stored in the lists  
(Outgoing, Answered, Missed)  
Network services (Menu 1)  
11 Call divert  
12 Call barring  
13 Call waiting  
14 Closed user group  
15 Outgoing call identification  
Call timers and charge (Menu 6)  
61 View duration and cost of last call  
62 View duration and cost of total calls  
63 Reset call timers  
64 Display call timer and cost during  
conversation  
Tones setup (Menu 2)  
21 Ring tone  
22 Trembler (optional extra)  
23 Message tone  
24 Broadcast tone  
25 Key tone  
65 Call charge  
Security (Menu 7)  
71 PIN code  
72 SIM card lock  
26 Factory settings  
73 Change network password  
74 Encryption indication  
Phone setup (Menu 3)  
31 Selection of language  
32 Dial setup  
33 Selection of network  
34 Power saving function  
35 Car kit options  
Calculator (Menu 8)  
Applications (Menu 9)  
The availabilility of this menu depends on your  
SIM card. The options in this special menu are  
defined by your network operator. The menu al-  
lows you to set up a dialogue between you, your  
SIM card and your network operator.  
36 Edit welcome greeting  
37 Incoming call setup  
38 Any key answer  
39 Factory settings  
Message setup (Menu 4)  
41 Setup for sending Point-to-point messages  
42 Setup for receiving Cell broadcast messages  
43 Delete messages  
24  
SETUP MENU SYSTEM  
How to access the Setup menu system Back to standby mode  
While you are in menu mode, holding EXIT will  
1. Press MENU  
always bring you to the standby mode.  
2. Select the menu you want to access  
using  
The telephone automatically returns to standby  
mode when no key has been pressed for 60 se-  
conds.  
3. Confirm by pressing SELECT  
4. Select the sub menu you want to access  
using  
5. Confirm by pressing SELECT  
Menu numbers  
On the right hand side in the first line of the dis-  
play you will always see the number of the menu  
and sub menu in which you are operating. This is  
indicated by up to 6 digits.  
Example: 62  
6 = Menu 6: Call timers and charge  
2 = Sub menu 2: View total calls  
A before the sub menu/option number indicates  
the option you have selected.  
Shortcut to the setup menu system  
As you get more familiar with the Setup menu  
system, you will probably find it easier to access  
some of the menus simply by pressing the menu  
code number.  
For example, to see the duration of your total  
calls:  
1. Press MENU  
2. Press 62  
25  
CALL DIVERT  
You have the option of diverting all calls or  
Validity time  
choosing to divert incoming calls only if un-  
answered. The unanswered calls option diverts  
calls  
If you have selected  
Divert if unanswered  
or  
Divert if no reply  
you can specify that a period of time must elapse  
before the call is diverted. This period can be  
from 5 to 30 seconds at intervals of 5 seconds.  
– if you are busy  
– if you do not reply  
– if there is no contact  
Registration  
To enable a call divert you must register it first.  
You will be asked to specify whether you want  
It is always possible to see the status of the  
activated call diversions by selecting Status.  
Registered call diversions can be cancelled  
individually or can all be cancelled at once by  
selecting Cancel all.  
the call divert function to apply to all services  
speech data services fax services or mes-  
sage services (SMS).  
,
,
,
Deactivation/activation  
You may not be able to make use of the deactiv-  
ate and activate options. In that case you must  
cancel a call diversion by selecting Cancel.  
Next time you want your incoming calls diverted,  
select Register.  
Calls can be diverted to a telephone number  
stored in your phone book or to any other num-  
ber. Access your phone book by pressing  
enter a phone number via the keypad.  
or  
If you have chosen to have all calls diverted, the  
call divert indicator  
standby display.  
will be visible on the  
If you wish to suspend your calls being diverted  
for a time, select Deactivate. All registra-  
tions will remain in the network, so next time  
you wish to divert your calls to the same number,  
simply select Activate.  
26  
CALL DIVERT  
How to activate call divert for all  
calls  
1. Press MENU  
2. Select Network services  
by pressing SELECT  
3. Confirm by pressing SELECT once  
more to indicate that you want access  
to the call divert menu.  
4. Select using  
Divert all calls  
Register  
All services  
Speech  
Data services  
Fax services  
Message services  
Number  
Activate  
Deactivate  
Status  
Cancel  
Status  
Cancel all (call diverts)  
5. Confirm your choice by pressing OK  
If you want to activate a call divert on the  
basis of  
Divert if unanswered  
Divert if busy  
Divert if no reply  
Divert if no contact  
just follow the procedure described above  
giving you the same options.  
27  
CALL DIVERT  
You can set up call barring for different types of  
outgoing and incoming calls to restrict the use of  
your phone.  
1. Press MENU  
2. Select Network services  
by pressing SELECT  
You have to activate the type of call barring you  
wish to set up. You are asked to specify whether  
you want the call barring to apply for all ser-  
vices, speech, data services, fax services or mes-  
sage services (SMS).  
3. Select Call barring using  
and confirm by pressing SELECT  
4. Select using  
Outgoing calls  
All calls  
When setting up or cancelling any call barring,  
you will be asked to enter your 4-digit password  
provided by your network operator.  
Activate  
All services  
You can always see the status of the actually  
activated call barring by selecting Status.  
Speech  
Data services  
Fax services  
Message services  
Outgoing call barring  
Status  
Cancel  
Select All calls if you want to bar all out-  
going calls. Select International if you  
want to bar international calls only. Select  
Roaming if you want outgoing calls to be  
barred when you are connected to a foreign  
network – this still leaves you the possibility of  
making calls to your home country.  
Status  
Cancel all (call barrings)  
5. Confirm your choice by pressing OK  
If you want to activate call barring for  
International calls  
Roaming calls  
Calls to Emergency Services (see page 11) can still  
be made even if all outgoing calls are barred.  
just follow the procedure described above  
giving you the same options.  
Call barring of incoming calls is activated and  
cancelled in exactly the same way covering the  
sub menus  
All calls  
Roaming calls  
28  
CALL W AITING  
Incoming call barring  
Call waiting  
Select All calls if you want to bar all in-  
coming calls. Select Roaming if you want  
incoming calls to be barred only when you are  
connected to a foreign network.  
During a conversation your telephone can notify  
you that a new call is waiting. This is indicated by  
a special ringing tone in the earphone. To activate  
this function just select Activate in the Call  
waiting option.  
Cancelling call barrings  
If you want to answer the new call press ANSWER  
Call barrings can be cancelled individually or by  
selecting Cancel all.  
The active call will be put on hold automatically.  
See page 12 for further details on how to handle  
multi-party calls.  
If you do not want to answer the call, press  
REJECT instead. You can have the new call  
diverted to, for example, your telephone an-  
swering service. See page 26 for how to set up  
a call divert.  
If you do not want to be disturbed by new in-  
coming calls you can disable the function by  
selecting Cancel in the Call waiting option.  
You can always see whether Call waiting is  
activated or not by selecting Status.  
29  
SUPPLEMENTARY NETW O RK  
SERVICES  
Closed user group  
This is a network feature by which the use of your  
telephone is restricted to certain phone numbers  
within a group defined by the network operator  
and the owner of the SIM card. You may be a  
member of different groups. Each group has its  
own ID number. The network defines which  
group is your default user group. You have the  
option of calling outside the group – perhaps at a  
higher charge.  
Outgoing call identification  
You can select whether you want your phone  
number to be shown or not at the next outgoing  
call. In Network Service select the option  
Outgoing call identification, then  
Show info for next call and confirm  
your choice by pressing OK.  
Unstructured supplementary services (USSD)  
On some networks you have the possibility of  
sending unstructured supplementary service  
strings. An USSD service string should always be  
terminated by pressing the -key.  
In order to be able to send USSD service strings  
you must enter the Phone setup menu and select  
Speed dialling off. Pressing the relevant  
keys 0 to 9 for one second will lead you to the  
alpha mode enabling you to enter letters and di-  
gits instead of only digits.  
Contact your network operator for further infor-  
mation on these supplementary services.  
30  
TO NES SETUP  
You can disable all kinds of tones by pressing  
How to adjust tones  
MENU and then  
. In that case the symbol  
will be seen in the display. Just press MENU and  
1. Press MENU  
again to revert to your original settings.  
2. Select Tones setup using  
3. Confirm by pressing SELECT  
Trembler  
4. Select using  
either  
If you have a trembler battery you can select  
whether the trembler should be active or not  
at an incoming call.  
Ringing tone  
Trembler (Optional extra)  
Message tone  
Message tone  
Broadcast tone  
Key tone  
Your telephone can alert you to the arrival of a  
SMS message by means of different alert tones.  
Factory settings  
5. Confirm by pressing SELECT  
Keypad tone  
6. Select the volume or pattern you want  
to change using  
To help you keep check on your dialling, the  
phone can be set to give 8 different tone patterns  
following every key pressed.  
7. Confirm by pressing OK  
Factory settings  
Ringing volume level and ringing  
tones  
You can always return to the original tones setup  
of your phone. The phone is set up by the manu-  
facturer as follows:  
You can adjust the ringing volume level and  
select the ringing tones according to your sur-  
roundings and preferences.  
Ringing volume  
level:  
Ringing tone:  
Trembler:  
Message tone:  
Broadcast tone:  
Key tone:  
Loud  
British  
Off  
Simple  
Discreet 1  
3
Ringing volume levels are high, medium, low,  
escalating and off. The LED on top of the phone  
will emit a fast green flash to indicate an in-  
coming call. If the ringing tone is set to off  
you will see the  
play.  
symbol on the standby dis-  
You have the option of selecting between 27 dif-  
ferent ringing tone patterns.  
The selected ringing tone will sound at the rele-  
vant ringing volume level when making your  
selection.  
31  
PHONE SETUP  
This menu offers you the possibility of setting some  
of the telephone's options according to your own  
personal wishes.  
Speed dialling  
To speed dial using your location numbers, you  
have to select Speed dialling on. If you  
do not want to make use of this feature, select  
Speed dialling off.  
How to set up options  
1. Press MENU  
Network selection  
2. Select Phone setup using  
3. Confirm by pressing SELECT  
When you wish to use your phone abroad, you  
have to select a foreign network. This can be  
done either manually or by letting your telephone  
do it for you automatically.  
4. Select using  
either  
Language  
In the automatic mode, your phone will auto-  
matically try to reach your home network first,  
then, alternatively to find another available net-  
work stored in a preferred list made by you (see  
below).  
Dial setup  
Network selection  
Power saving  
Car kit  
Greeting  
In the manual mode, the phone will always start  
searching for the network with which it was in  
contact when it was switched off. If the phone  
cannot locate this network it will present some  
alternative networks on the display, and you can  
then select one manually.  
Incoming call setup  
Any key answer  
Factory settings  
5. Confirm by pressing SELECT  
6. Make your selection using  
7. Confirm by pressing OK  
You can select any network from the list, but  
your phone can get in contact only with co-  
operating networks (Roaming). The telephone can  
get into contact with other networks but only for  
emergency calls.  
Language selection  
The display language of your phone is normally  
the national language of the country in which you  
purchased your SIM card. If this is not the case the  
display language will be English. You have the  
option of choosing between different languages.  
(See page 10 for how to select language).  
Your dealer or network operator can tell you  
which networks are co-operating.  
Preferred list  
The list of networks on your SIM card defines the  
order of preference in which your phone will se-  
lect a network in automatic mode. Network ope-  
rators offer different services and call charges;  
therefore it may be beneficial for you to make a  
preferred list of your own. Enter the individual  
networks in your own order of preference and  
store them on your SIM card.  
Dial setup  
Automatic redial  
If the phone number you are calling is busy or  
your call is not answered, you can let your  
phone make up to 10 automatic redial attempts.  
A special redialling success tone sounds when the  
attempt is successful. To cancel the auto redialling  
attempts just press the left function key.  
32  
PHONE SETUP  
To do this, you must access the Selection of net-  
work sub menu, select the Set preferred list op-  
Welcome greeting  
You can change the welcome greeting of your  
phone according to your own wishes. Delete the  
old message by holding CLEAR, enter the new  
greeting via the keypad and confirm by pressing  
OK.  
tion and use  
to select the empty location in  
which you want to store the new network. Pres-  
sing EDIT will give you a list of available net-  
works. Scroll through the list using  
. When you  
see a network you wish to store in your preferred  
list, just press OK. If you select a currently used  
location and press EDIT, the former occupant  
can be deleted when you enter the new one. Just  
press EXIT to leave the list as it was.  
Incoming call setup (fax/data)  
Do not enter this menu unless you are using your  
phone for fax and data communications! Fax and  
data capability will require a separate data inter-  
face kit (optional). The menu settings are explained  
in the user guide supplied with this kit.  
Once a network is stored in the preferred list, you  
can always see the country and network code of  
the actual network by pressing EDIT in the Set  
preferred list option.  
Any key answer  
You can answer an incoming call by pressing any  
key you like except for the left function key and  
the arrow keys if you select  
Any key answer on.  
Power saving  
To save your battery and thus increase both  
conversation and standby times you can select  
whether you want the display contents to be  
visible or not in standby mode.  
Select Display remains on if you want it  
to be visible, and Display switches off  
if you want it not to be visible. The display will  
switch off after 3 minutes in standby mode.  
Factory settings  
You can always return to the original setup of  
your phone. The phone is set up by the manu-  
facturer as follows:  
Language:  
Dial setup:  
Automatic  
In standby mode the display and keypad backlight  
will always switch off after 10 seconds if your tele-  
phone is set to Backlight on. However, you  
have the option of having the backlight switched  
off permanently by selecting Backlight off.  
Autoredial off  
Speed dialling on  
Automatic  
Display on  
Backlight on  
Network:  
Power saving:  
Car kit:  
Auto answer off  
Auto power off automatic  
Welcome  
Car kit installation  
This option is only effective if the phone is con-  
nected to a handsfree car kit. See page 39 for  
more information.  
Greeting:  
Incoming call setup: Next call type: Speech  
All call type: Speech  
Any key answer:  
Off  
33  
MESSAGE SETUP  
back to you through the same chain of service  
Send message setup  
centres. To keep this possibility open, you must  
enter the Send Message Setup option and select  
Reply path on.  
Before you can send a message you have to enter  
your network operator's telephone number for  
this special service. Contact your network opera-  
tor to obtain this number.  
Broadcast setup  
1. Press MENU  
To set up the list covering the kind of information  
you wish to receive, select the option  
Broadcast channels. The display will  
show you various locations in which you can  
store the individual channels. Pressing EDIT will  
give you a range of different kinds of information.  
2. Select Message setup using  
and confirm by pressing SELECT  
3. Select Send message setup  
4. Select Service centre  
5. Confirm by pressing SELECT  
Use  
to scroll through the possibilities and  
confirm your choice by pressing SELECT. The  
selected kind of information is now stored in the  
channel list. Proceed in the same way if you want  
to receive other kinds of information.  
6. Enter the SMS operator telephone number.  
Remember to add "+" and national code  
before the number.  
Some network operators offer cell broadcast mes-  
sages in different languages. Select the option  
Broadcast language and confirm your  
choice by pressing OK.  
7. Press OK  
The number will automatically be used for sen-  
ding all future messages.  
You can select whether you want the cell broad-  
cast option to be on or off by selecting  
Having stored a service centre number you have  
the option of adding a new service centre, dele-  
ting a service centre or editing the number of an  
Broadcast setting and using  
to  
select whether the function should be on or off.  
existing service centre by pressing  
and con-  
firm your choice by pressing OK.  
The option of storing more than one service cen-  
tre number may not be available with all SIM  
cards.  
If for some reason your message cannot be deliv-  
ered, it will remain with your SMS operator for a  
period of time specified by you under Validity  
period.  
Under the option Teleservice you can specify in  
what format you want your messages to be sent -  
for instance select Text message if you  
want to send it to another mobile telephone.  
For messages that have to be sent via several  
service centres to reach the recipient, some net-  
works offer the feature of sending a reply, if any,  
34  
PHO NE BO O K SETUP /  
CALL TIMERS AND CHARGE  
Fixed dialling  
Call timers and charge  
In order to enable you to make use of fixed dial-  
ling numbers stored in an alternative phone book  
defined by you, select Fixed dialling on.  
Having selected Fixed dialling on your  
ordinary phone book will not be visible on the  
display and can thus not be accessed, but, of  
course, it will remain on your SIM card and can  
be accessed again by selecting  
Your telephone can display the actual duration  
and cost of an ongoing conversation if you so  
wish. It can also show you the duration and cost  
of the last call and all calls made with your SIM  
card since the timer was last reset. However, the  
call charge feature must be supported by your  
network.  
In order to be able to see the cost in the display  
you have to enter a unit price and the actual cur-  
rency. You can also enter a maximum call charge  
limit, so that when this maximum has been  
reached no more phone calls can be made. The  
telephone will inform you about the remaining  
call charge balance.  
Fixed dialling off.  
Barred dialling  
If you have a barred dialling phone book on your  
SIM card you must select  
Barred dialling on to enable it.  
Having selected Barred dialling on any  
attempt to make a call will make the phone com-  
pare the dialled number with the numbers stored  
in this special phone book. If the dialled number  
is stored in the Barred numbers phone book the  
call will be refused.  
To enter or change call charge and currency you  
will be requested to enter your PIN2 code.  
How to see timers  
1. Press MENU  
To enable the fixed dialling and the barred dial-  
ling phone books you have to enter your PIN2  
code.  
2. Select Call timers and charge  
using  
3. Confirm by pressing SELECT  
Phone book sorting  
4. Select using  
either  
You have the option of selecting whether you  
want your phone book sorted by name or by  
location.  
Last call  
Total calls  
Reset timers  
Display timer (on display)  
Call charge  
Delete call information  
You can delete all entries stored in the Outgoing,  
Answered and Missed calls lists. Select the sub  
menu Delete call information and  
select the list which you want to delete.  
maximum  
unit price  
currency  
remaining  
5. Confirm by pressing OK  
35  
SECURITY  
PIN code  
How to enable, disable and change  
PIN codes  
To prevent misuse of your SIM card, e.g. if it is lost  
or stolen, you can select a PIN code to be entered  
each time you switch on the phone.  
1. Press MENU  
2. Select Security using  
3. Confirm by pressing SELECT  
The PIN code is a 4 to 8-digit number of your  
own choice, which you can change any time  
you like.  
4. Select using  
either  
If you enter an invalid PIN code three times, your  
SIM card will be blocked and to unblock it you  
have to enter the PIN Unblocking Key (PUK) code  
supplied by your network operator. This proce-  
dure prevents unauthorized person from working  
out your PIN code by repeatedly entering different  
combinations of numbers.  
PIN code  
PIN code on  
PIN code off  
PIN code change  
Change PIN  
Change PIN2  
SIM lock  
The display will inform you how many tries you  
have left before the SIM card is blocked. If you  
enter an invalid PUK code 10 times, your SIM  
card will be permanently blocked and you have  
to contact your network operator to have it un-  
blocked.  
SIM lock on  
SIM lock off  
Network password  
Encryption indication  
Encryption indication on  
Encryption indication off  
Some SIM cards use a PIN2 code for accessing  
special functions. Contact your network operator  
for further information on PUK2 and PIN2 codes.  
5. Confirm your choice by pressing OK  
SIM lock  
You can link your telephone and your SIM card  
together. This means that if, for instance, your  
phone is stolen it cannot be used together with  
another SIM card. To enable this feature just select  
SIM lock on and enter an 6 to 16-digit code  
of your own choice. For your own sake remember  
to write down this code to be able to deactivate  
the lock at a later time. You have 10 attempts be-  
fore the phone is blocked.  
36  
SECURITY  
How to change password  
If you subscribe to a call barring service your net-  
work operator will have supplied you with a 4-  
digit password. If you want to change this, select  
Network password in the Security menu.  
Encryption indication  
If you connect to a network which does not sup-  
port encryption, you will get a warning in the dis-  
play when trying to make a call. You have the op-  
tion of turning off this network warning by  
selecting Encryption indication off  
in the security menu.  
37  
CALCULATOR  
You can use your mobile phone as an ordinary  
calculator.  
Calculation examples  
5 plus 2  
Press 5, hold down 1 for one second, press 2 and  
How to use the calculator  
press =  
(7)  
1. Press MENU  
8 divided by 4  
2. Select Calculator using  
3. Confirm by pressing OK  
Press 8, hold down 5 for one second, press 4 and  
press =  
(2)  
Square root of 8  
Press 8 and hold down 6 for one second  
Your telephone now acts as a normal calculator.  
The equal-sign (=) is found on the right hand  
function key.  
(2.8284271)  
15 per cent of 60  
Press 6, 0, hold down 2 for one second,  
press 1, 5, hold down 7 fo r one second  
Hold down the relevant key for one second to get  
the desired arithmetic operation.  
(9)  
By pressing  
you get access to a survey of what  
arithmetic operation is placed on what key.  
-5.2 times 10,000  
Press 5,  
press 1, hold down 9 for one second, press 4 and  
finally = (-52OOO)  
, 2, , hold down 2 for one second,  
Key  
1
2
3
4
5
6
7
8
Operation  
Addition (+)  
Multiplication (*)  
Square function (x2)  
Subtraction (-)  
Division (/)  
Square root ()  
Percentage (%)  
Fractions (1/x)  
Exponent (E)  
As soon as a figure is stored in the memory this  
will be indicated on the display by an M. You can  
access the memory by pressing  
(MR).  
or the -key  
The memory is reset each time you switch off  
your phone.  
9
M+ or decimal point (press briefly)  
MC  
0
MR or -/+ (neg./pos.) (press briefly)  
38  
ACCESSORIES  
Professional Handsfree Car Kit  
Remove the rubber plug covering the antenna hole  
on the back of the handset.  
2
When placing the phone in the cradle, make sure  
that the antenna catch is open (slider in left hand  
side position). When the phone is in place, move  
the slider to the right hand side for locked position.  
1
When your phone is placed in the cradle, it will  
switch on automatically with the car ignition. You  
can select whether you want the telephone to  
switch off automatically with the car ignition after  
a delay of 1 hour or whether you want to switch it  
off manually.  
3
If you have selected  
Switch off automatically  
and want to switch your telephone off while the  
ignition is still on, you must do so manually.  
The display and keypad backlighting on your  
phone will switch on and off automatically with  
the car ignition. While the phone is switched on  
and placed in the cradle the backlighting will  
remain on continuously.  
The battery will be automatically recharged as  
necessary.  
How to make a hands-free call  
How to receive a hands-free call  
1. Enter the phone number you wish to  
call or retrieve it from the phone book.  
1. Press ANSWER when the phone rings.  
2. Press END to end your call.  
2. Press CALL to let the conversation take  
place via the external speaker and  
microphone.  
By selecting Car kit auto answer on  
you can set your telephone to answer a call auto-  
matically after 5 seconds. This option is only ef-  
fective when the car ignition is on.  
3. Press END to end your call.  
If you have selected Any key answer on  
in the Phone setup menu you can, of course,  
answer the call by pressing any key.  
39  
ACCESSO RIES  
If you want to switch from hands-free mode to  
normal mode, just lift the handset and cradle as  
one complete unit – and back again for returning  
to hands-free. The switching is performed auto-  
matically.  
1
2
3
Basic Car Kit  
Remove the rubber plug covering the antenna hole  
on the back of the handset.  
2
When placing the phone in the cradle, make sure  
that the antenna catch is open (slider in left hand  
side position). When the phone is in place, move  
the slider to the right hand side for locked position.  
1
The cradle connects to the cars cigar lighter plug  
and external antenna.  
The battery will be automatically recharged as  
necessary.  
When your phone is switched on and placed in  
the cradle, the backlighting will remain on.  
An external antenna must be connected, since the  
handset antenna is disconnected when the phone  
is placed in the cradle.  
1
2
40  
ACCESSO RIES  
Simple Car Holder  
Using the Simple Car Holder will require a spe-  
cial knob to be fitted on the back of your phone.  
The necessary parts come with the package.  
1
2
3
How to fit the knob:  
Remove the label from the back of the phone. The  
knob can now be fitted by means of a screwdriver.  
Place the new label to cover the screw.  
1
= PZ 1  
2
Headset  
How to make a hands-free call  
1. Enter the phone number you wish to  
call or retrieve it from the phone book.  
2. Press CALL to let the conversation take  
place via the external speaker and  
microphone.  
3. Press END to end your call.  
How to receive a hands-free call  
1. Press ANSWER when the phone rings.  
2. Press END to end your call.  
41  
ACCESSO RIES  
Desktop charger  
The desktop charger is powered by means of the  
charger supplied with your telephone.  
When you place the telephone in the desktop  
charger you have to make sure that the battery  
symbols on the display start flashing. The battery  
takes 1 to 5 hours to become fully charged de-  
pending on type and size of the battery. During  
charging the battery symbols on the display of  
your telephone will flash on and off one after  
another. When the battery is fully charged all  
4 symbols are permanently displayed.  
A spare battery can be attached for charging on  
the back of the desktop charger. The LED indica-  
tor on the front will show a red light during char-  
ging and a green light when the spare battery is  
fully charged. The indicator will be off when there  
is no spare battery attached.  
1
Insert  
2
1
2
1
Remove  
42  
ACCESSO RIES  
Belt clip  
The necessary parts for fitting the belt clip to your  
phone comes with the package.  
1
2
3
How to fit the belt clip:  
Remove the label from the back of the phone.  
The belt clip can now be fitted by means of a  
screwdriver. Place the new label to cover the  
screw.  
= PZ 1  
Data Interface  
Your phone can be connected to your PC or  
laptop computer for data and fax communication.  
Please refer to separate user guide supplied with  
the kit.  
Other accessories  
Extra Light 350 mAh Li-ION battery  
Vibra-Alarm 650 mAh Li-ION battery  
Light 650 mAh Li-ION battery  
Light 750 mAh NiMH battery  
High Power 1800 mAh Li-ION battery  
Travel Charger  
Cigarlighter Charger 12/24 V  
43  
INDEX  
Accessories  
Alternative phone books 17  
39  
Find a name/number  
Fixed numbers  
15  
17  
Prefix telephone numbers 16  
Private calls  
13  
Answered calls  
Answering a call  
Any key answer  
Auto answer  
Automatic redial  
Automatic switch off  
19  
7, 11  
33  
39  
32  
Professional handsfree  
car kit  
PUK code  
PUK2 code  
Putting a call on hold  
Greeting  
33  
41  
39  
36  
36  
12  
Headset  
Important notice  
Incoming call setup  
International calls  
4
33  
10  
39  
Reading a message  
- cell broadcast  
- point-to-point  
Remaining call charge  
Reset timers  
Barred numbers  
Basic car kit  
Battery  
Battery level indicator  
Before sending messages 22  
Before you start  
Belt clip  
Broadcast channel list  
Broadcast language  
Broadcast setup  
17  
40  
8
23  
21  
35  
35  
31  
Joining calls  
13  
Keypad  
Keypad lock  
Keypad tone  
6
13  
31  
8
Ringing tones  
8
43  
34  
34  
34  
Security  
36  
10  
32  
22  
34  
17  
24  
9
Language  
List menu system  
Location numbers  
10  
18  
14  
Selection of language  
Selection of network  
Sending a new message  
Service centre (SMS)  
Service numbers  
Setup menu system  
SIM card  
SIM card limitations  
SIM lock  
Simple car holder  
Speed dialling  
Making a call  
7, 10  
35  
25  
Maximum call charge  
Menu numbers  
Messages  
- cell broadcast  
- favourites  
- point-to-point  
Message setup  
- cell broadcast  
- point-to-point  
Message tones  
Missed calls  
Calculator  
Call barring  
Call divert  
Call timers/charge  
Call waiting  
Car kit installation  
CLI  
Closed user group  
Continuing calls  
Currency/Call charge  
38  
28  
26  
35  
29  
39  
19  
30  
12  
35  
23  
22  
21  
4
36  
41  
15  
14  
34  
34  
31  
20  
12  
Store a name/number  
Supplementary network  
services  
30  
13  
Switching calls  
Data/fax transmission  
Data interface  
Delete all messages  
Delete a name/number  
Delete call information  
Desktop charger  
Display  
Duration of last call  
Duration of total calls  
33  
43  
21  
15  
35  
42  
7
Muting the microphone  
Tones setup  
Transferring calls  
Trembler  
31  
13  
31  
Network password  
Network selection  
37  
32  
Options in conversation  
Outgoing calls  
Outgoing call identity  
Own numbers  
12  
19  
30  
17  
Unit price  
USSD  
35  
30  
35  
35  
Voice mail  
Volume control  
15  
7
Phone book  
Phone book sorting  
Phone book status  
Phone setup  
PIN code  
PIN2 code  
Power saving  
Precautions  
14  
35  
16  
32  
36  
36  
33  
3
Edit an old message  
Edit a name/number  
Emergency calls  
Encryption indication  
Extension numbers  
23  
15  
11  
37  
11  
Welcome greeting  
33  
Factory settings  
- telephone  
- tones  
33  
31  
Preferred list  
32  
44  
BOSCH EASY SETS  
Accessories for Bosch mobile phones  
GSM 908  
For the car  
101  
Professional Handsfree Car Kit  
Basic Car Kit  
Simple Car Holder  
Cigarlighter Charger 12V/24V  
For the computer  
102  
103  
104  
201  
Data Interface  
For charging  
305  
301  
302  
303  
304  
Desktop Charger  
Travel Charger - EU  
Travel Charger - UK  
Travel Charger - AUS  
Travel Charger - US  
For power  
501  
502  
503  
505  
504  
Extra Light 350 mAh Li-Ion battery  
Light 650 mAh Li-Ion battery  
Vibra-Alarm 650 mAh Li-Ion battery  
Light 750 mAh NiMH battery  
High Power 1800 mAh Li-Ion battery  
Outfit  
701  
702  
Headset  
Belt clip  
Bosch Telecom GmbH  
Produktbereich Endgeräte  
Kleyerstr. 94,  
60326 Frankfurt/Main,  
Tel. (0180) 5 2214 92  
Fax (0180) 5 2214 93  
Robert Bosch SA  
D
B
E
Ctra. Nacional VI, km. 18,150,  
28230 Las Rozas Madrid  
Tel. (3 41) 6 31 23 72  
Robert Bosch AG  
Postfach 146, 1110 Wien,  
Tel. (4 31) 79722-0  
A
N.V. Robert Bosch S.A.  
Rue Henri Genessestraat 1,  
1070 Bruxelles / Brussel  
Tel. (02) 5 25 5460  
Robert Bosch AG  
Industriestr. 31, 8112 Otelfingen,  
Tel. (4 11) 8 47 14 14  
CH  
TR  
Robert Bosch A/S  
Telegrafvej 1, 2750 Ballerup,  
Tel. 44 89 89 89  
DK  
F
Bosch Sanayi ve Ticaret A.S.  
Ambariar CAD No. 4,  
34780 Zeytinburnu-Istanbul  
Tel. (0212) 5 58 2470  
Robert Bosch (France) S.A.  
B.P. 170, 32 Avenue Michelet,  
93404 Saint Ouen,  
Robert Bosch Kft.  
P.O. Box 331, 1475 Budapest  
Tel. (3 61) 43 13 710  
H
Tel. (0) 1 401070 07  
Robert Bosch S.A.  
162 Kifissou, 12131 Peristeri, Athens,  
Tel. (301) 57 01286  
GR  
NL  
OY Hedengren AB  
Lauttasaarentie 50,  
00200 Helsinki  
Tel. (90) 68 281  
SF  
Robert Bosch BV  
Neptunusstraat 71,  
2132 JP Hoofddorp,  
Tel. 023 56 56-3 91  
Beaver Distribution Ltd.  
Greenhills Road, Tallaghl, Dublin 24,  
Tel. (35 31) 4 51 52 11  
IRL  
L
Robert Bosch Ltd.  
Sales Communication Equipment  
P.O. Box 98  
Uxbridge, Middlesex UB9 5HJ  
Tel. 0345 585220  
GB  
I
Central Import Export Corporation  
Zone Industrielle, Rue des Jones,  
1818 Howald,  
Tel. (2) 40 30 60  
Robert Bosch  
Robert Bosch Pte Ltd  
38c Jalan Pemimpin,  
Singapore 57180,  
Tel. 3 50 54 52  
SGP  
ZA  
Industriale e Commerciale S.P.A.  
Via M.A. Colonna 35, 20149 Milano,  
Tel. (3 92) 36 96-1  
Robert Bosch AS  
Postboks 629, 1411 Kolbotn,  
Tel. 66 81 70 00  
Robert Bosch (Pty) Ltd.  
Private Bag X118, Randjespark,  
Midrand 1685  
N
S
P
Rep. of South Africa  
Tel. (011) 651-9600  
Robert Bosch Aktiebolag  
Box 1154, 164 26 Kista,  
Tel. (8) 75015 00  
Robert Bosch Lda.  
Av. Infante D. Henrique, Lotes 1E, 2E,  
Apartado 8058, 1801 Lisboa Codex,  
Tel. (3511) 8 50 00 00  

Kenwood KDC 219 User Manual
Kenwood DP R894 User Manual
JVC KD SX745 User Manual
Hitachi Travelstar 5K320 User Manual
Hamilton Beach Stay or Go Thermal Coffeemaker 45237R User Manual
Disney DCR5500 C User Manual
Bunn TDR 5 User Manual
Barracuda Networks ST36810A User Manual
Audiovox ACD 25 User Manual
Addonics Technologies JCCHDIF128 User Manual