Black Box Computer Accessories Server Access Modules SAMs User Manual |
KV1400A
KV1401A
KV1402A
KV1403A
KV1404A
KV1405A
KV1406A
KV1407A
KV1408A
KV1409A
Server Access Modules (SAMs)
Connect one or two servers or peripherals to a
ServSwitch CX, ServSwitch CX Uno, or ServSwitch
CX with IP.
Work with USB, PS/2 with audio, USB with audio, Sun with audio,
dual USB, dual USB and audio, RS-232, DisplayPort, and mini DisplayPort
interfaces.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
Support
Information
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
FCC and IC RFI Statements
Federal Communications Commission and Industry Canada Radio Frequency Interference
Statements
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict
accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to
comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules,
which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own
expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio
Interference Regulation of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques
de la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.
724-746-5500 | blackbox.com
Page 3
NOM Statement
Instrucciones de Seguridad
(Normas Oficiales Mexicanas Electrical Safety Statement)
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca
de una alberca, etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de operación.
Todo otro servicio deberá ser referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico
sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes
que impidan el flujo de aire por los orificios de ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros
aparatos (incluyendo amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como
se indique en el aparato.
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados
sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
724-746-5500 | blackbox.com
Page 4
Table of Contents
Table of Contents
1. Specifications.........................................................................................................................................................................6
2. Overview ...........................................................................................................................................................................7
2.1 Introduction...................................................................................................................................................................7
2.2 Available Models ...........................................................................................................................................................7
2.3 What’s Included ............................................................................................................................................................8
2.4 Hardware Description....................................................................................................................................................8
2.4.1 KV1400A............................................................................................................................................................8
2.4.2 KV1401A ............................................................................................................................................................9
2.4.3 KV1402A............................................................................................................................................................9
2.4.4 KV1403A..........................................................................................................................................................10
2.4.5 KV1404A.......................................................................................................................................................... 11
2.4.6 KV1405A..........................................................................................................................................................12
2.4.7 KV1406A..........................................................................................................................................................13
2.4.8 KV1407A..........................................................................................................................................................14
2.4.9 KV1408A..........................................................................................................................................................15
2.4.10 KV1409A..........................................................................................................................................................16
3. Installation ......................................................................................................................................................................... 17
3.1 Installation Steps.......................................................................................................................................................... 17
3.2 Typical Applications..................................................................................................................................................... 17
3.2.1 KV0081A or KV0161A...................................................................................................................................... 17
3.2.2 KV0424A-R2.................................................................................................................................................... 17
3.2.3 KV1416A-R2.....................................................................................................................................................18
4. Troubleshooting...................................................................................................................................................................19
4.1 Contacting Black Box...................................................................................................................................................19
4.2 Shipping and Packaging ..............................................................................................................................................19
724-746-5500 | blackbox.com
Page 5
Chapter 1: Specifications
1. Specifications
Operating System — Linux®, Unix®, Mac®, Sun® , Windows® 32/64 bit
Interface — KV1400A: PS/2,
KV1401A: USB,
KV1402A: PS/2 with audio,
KV1403A: USB with audio,
KV1404A: Sun with audio,
KV1405A: dual USB,
KV1406A: dual USB and audio,
KV1407A: quad IP RS-232;
KV1408A: DisplayPort, USB and audio;
KV1409A: Mini DisplayPort, USB, and audio
Distance (Maximum) —
Between SAM and ServSwitch CX or CX Uno:
KV1400A–KV1404A: 164 ft. (50 m) with ServSwitch CX 4-User, 32 ft. (10 m) with ServSwitch CX Uno;
KV1405A, KV1406A: 32 ft. (9.8 m) over CATx cable, resolutions are higher at shorter distances;
KV1407A: 32 ft. (9.8 m) over CATx cable;
KV1408A–KV1409A: 164 ft. (50 m) with ServSwitch CX 4-User, 32 ft. (10 m) with ServSwitch CX Uno and CX Uno
with IP;
Between SAM and User Station: All: 328 ft. (100 m), 1920 x 1200 @ 60 Hz;
656 ft. (200 m), 1600 x 1200 @ 60 Hz;
984 ft. (300 m), 1280 x 1024 @ 60 Hz
Resolutions — 1920 x 1200 @ 60 Hz (328 ft. [100 m]), 1600 x 1200 @ 60 Hz (656 ft. [200 m]), 1280 x 1024 @ 60 Hz
(984 ft. [300 m])
Connectors — KV1400A: (1) RJ-45, (2) 6-pin mini DIN, (1) HD15 M;
KV1401A: (1) RJ-45, (1) USB Type A M, (1) HD15 M;
KV1402A: (1) RJ-45, (2) 6-pin mini DIN, (1) HD15 M, (1) 3.5-mm plug;
KV1403A: (1) RJ-45, (1) USB Type A M, (1) HD15 M, (1) 3.5-mm plug;
KV1404A: (1) RJ-45, (1) 8-pin mini DIN, (1) HD15 M, (1) 3.5-mm plug;
KV1405A: (2) RJ-45 F, (1) USB Type A M, (1) HD15 M;
KV1406A: (2) RJ-45 F, (1) USB Type A M for keyboard and mouse, (1) HD15 M, (2) 3.5-mm plug;
KV1407A: (1) RJ-45, (1) DB9 F;
KV1408A: (1) DisplayPort M, (1) USB Type A M; (1) 3.5-mm plug;
KV1409A: (1) Mini DisplayPort M, (1) USB Type A M, (1) 3.5-mm plug
Indicators — All: (1) Power LED on RJ-45 connector
Power — KV1401A, KV1403A, KV1405A, KV1406A, KV1408A–KV1409A: Input: USB; 500 mA @ 5 VDC;
KV1400A, KV1402A: Input: PS/2: 500 mA @ 5 VDC;
KV1404A: Input: Sun: 500 mA @ 5 VDC;
KV1407A: Input: DB9 interface-powered
Size — KV1400A–KV1404A: 1.1"H x 1.75"W x 3.25"D (2.8 x 4.5 x 8.3 cm);
KV1405A–KV1407A: 1.1"H x 1.9"W x 3.25"D (2.8 x 4.8 x 8.3 cm);
KV1408A–KV1409A: 3.25"H x 1.1"W x 1.9"D (8.9 x 2.8 x 4.8 cm)
724-746-5500 | blackbox.com
Page 6
Chapter 2: Overview
2. Overview
2.1 Introduction
The Server Access Modules (SAMs) (part numbers KV1400A–KV1409A) connect servers to the ServSwitch CX, ServSwitch CX
Uno, or ServSwitch CX with IP. Modules (part numbers KV1400A–KV1406A and KV1408A–KV1409A) are compatible with the
ServSwitch CX and ServSwitch CX Uno. Modules KV1408A–KV1409A also work with the ServSwitch CX with IP.
KV1407A module only works with the Quad IP CX Switch (KV4161A).
2.2 Available Models
Table 2-1. Available SAMs.
Product Code Module Name
Application
KV1400A
KV1401A
ServSwitch CX Server Access Module, PS/2
Connects PS/2 servers to the ServSwitch CX, ServSwitch CX Uno, or ServSwitch CX with IP.
ServSwitch CX Server Access Module, USB
Connects USB servers to the ServSwitch CX, ServSwitch CX Uno, or ServSwitch CX with IP.
Connects PS/2 servers with audio to the ServSwitch CX, ServSwitch CX Uno, or ServSwitch CX
with IP.
KV1402A
KV1403A
KV1404A
ServSwitch CX Server Access Module, PS/2 with audio
Connects USB servers with audio to the ServSwitch CX, ServSwitch CX Uno, or ServSwitch CX
with IP.
ServSwitch CX Server Access Module, USB with audio
Connects Sun servers with audio to the ServSwitch CX, ServSwitch CX Uno, or ServSwitch CX
with IP.
ServSwitch CX Server Access Module, Sun with audio
ServSwitch CX Dual CATx Server Access Module, USB
KV1405A
KV1406A
Dual-access SAM enables you to share a single computer between two switches for redundancy.
Dual-access SAM enables you to share a single computer between two switches for redundancy.
ServSwitch CX Dual CATx Server Access Module, USB and
audio
Use this SAM to gain RS-232 connectivity to target machines. This model supports ServSwitch
Quad IP CX (KV4161A) only.
KV1407A
KV1408A
KV1409A
ServSwitch CX Quad IP CATx Server Access Module, Serial
ServSwitch CX Server Access Module, DisplayPort, USB,
and audio
Connect the ServSwitch CX to DisplayPort targets with USB using this SAM.
Connect the ServSwitch CX to Mini DisplayPort targets with USB using this SAM.
ServSwitch CX Server Access Module, Mini DisplayPort,
USB, and audio
724-746-5500 | blackbox.com
Page 7
Chapter 2: Overview
2.3 What’s Included
Your package should contain the following items. If anything is missing or damaged, contact Black Box Technical Support
at 724-746-5500 or [email protected].
• Server Access Module
2.4 Hardware Description
Figures 2-1 through 2-10 show the server access modules. Tables 2-2 through 2-10 describe their connectors.
2.4.1 ServSwitch CX Server Access Module, PS/2 (KV1400A)
1
2
3
4
Figure 2-1. KV1400A.
Table 2-2. KV1400A connectors.
Callout
Number in
Figure 2-1
Connector
Description
1
2
3
4
(1) RJ-45
Connects to ServSwitch CX and CX Uno.
(1) 6-pin mini DIN
(1) HD15 M
Connects to keyboard or mouse port on target computer.
Connects to video out port on target computer.
Connects to keyboard or mouse port on target computer.
(1) 6-pin mini DIN
724-746-5500 | blackbox.com
Page 8
Chapter 2: Overview
2.4.2 ServSwitch CX Server Access Module, USB (KV1401A)
1
2
3
Figure 2-2. KV1401A.
Table 2-3. KV1401A connectors.
Callout
Number in
Figure 2-2
Connector
Description
1
2
3
(1) RJ-45
Connects to ServSwitch CX and CX Uno.
Connects to USB port on target computer.
Connects to video out port on target computer.
(1) USB Type A M
(1) HD15 M
2.4.3 ServSwitch CX Server Access Module, PS/2 with Audio (KV1402A)
1
2
3
4
5
Figure 2-3. KV1402A.
724-746-5500 | blackbox.com
Page 9
Chapter 2: Overview
Table 2-4. KV1402A connectors.
Callout
Number in
Figure 2-3
Connector
Description
1
(1) HD15
Connects to video out on the target computer.
Connects to target computer’s audio out.
2
3
4
5
(1) 3.5-mm plug
(1) 6-pin mini DIN
(1) 6-pin mini DIN
(1) RJ-45
Connects to target computer’s keyboard/mouse PS/2 port.
Connects to target computer’s keyboard/mouse PS/2 port.
Connects to ServSwitch CX and CX Uno.
2.4.4 ServSwitch CX Server Access Module, USB with Audio (KV1403A)
1
2
3
4
Figure 2-4. KV1403A.
Table 2-5. KV1403A connectors.
Callout
Number in
Figure 2-4
Connector
Description
1
2
3
4
(1) RJ-45
Connects to ServSwitch CX and CX Uno.
Connects to video out on the target computer.
Connects to target computer’s USB port.
Connects to target computer’s audio out port.
(1) HD15 M
(1) USB Type A
(1) 3.5-mm plug
724-746-5500 | blackbox.com
Page 10
Chapter 2: Overview
2.4.5 ServSwitch CX Server Access Module, Sun with Audio (KV1404A)
1
2
3
4
Figure 2-5. KV1404A.
Table 2-6. KV1404A connectors.
Callout
Number in
Figure 2-5
Connector
Description
Connects to ServSwitch CX and CX Uno.
1
2
3
4
(1) RJ-45
(1) 8-pin mini DIN
(1) HD15 M
Connects to target computer’s keyboard/mouse port.
Connects to target computer’s video out port.
Connects to target computer’s audio out port.
(1) 3.5-mm plug
724-746-5500 | blackbox.com
Page 11
Chapter 2: Overview
2.4.6 ServSwitch CX Dual CATx Server Access Module, USB (KV1405A)
1
2
3
Figure 2-6. KV1405A.
Table 2-7. KV1405A connectors.
Callout
Number in
Figure 2-6
Connector
Description
1
2
3
(1) HD15 M
Connects to video out on target computer.
Connects to USB port on target computer.
Connect to ServSwitch CX or CX Uno units.
(1) USB Type A M
(2) RJ-45 F
724-746-5500 | blackbox.com
Page 12
Chapter 2: Overview
2.4.7 ServSwitch CX Dual CATx Server Access Module, USB and Audio (KV1406A)
1
2
3
4
5
Figure 2-7. KV1406A.
Table 2-8. KV1406A connectors.
Callout
Number in
Figure 2-7
Connector
Description
1
2
3
4
5
(2) RJ-45
Connect to ServSwitch CX or CX Uno.
(1) DB9 F
Connects to RS-232 serial port on target computer.
Connects to video out on target computer.
(1) HD15
(1) USB Type A
(1) 3.5-mm plug
Connects to keyboard/mouse port on the target computer.
Connects to video out on the target computer.
724-746-5500 | blackbox.com
Page 13
Chapter 2: Overview
2.4.8 ServSwitch CX Quad IP CATx Server Access Module, Serial (KV1407A)
1
2
Figure 2-8. KV1407A.
Table 2-9. KV1407A connectors.
Callout
Number in
Figure 2-8
Connector
Description
1
2
(1) RJ-45
Connects to ServSwitch CX or CX Uno.
(1) DB9 F
Connects to DB9 serial port or RS-232 device.
NOTE: The KV1407A only works with the KV4161A and Quad IP User KVM Switch Module.
724-746-5500 | blackbox.com
Page 14
Chapter 2: Overview
2.4.9 ServSwitch CX Server Access Module, DisplayPort, USB and Audio (KV1408A)
1
2
3
4
Figure 2-9. KV1408A.
Table 2-10. KV1408A connectors.
Callout
Number in
Figure 2-9
Connector
Description
1
2
3
4
(1) DisplayPort M
Connects to DisplayPort on target computer.
Connects to video out on the target computer.
Connects to USB port on the target computer.
Connects to ServSwitch CX and CX Uno.
(1) 3.5-mm plug
(1) USB Type A M
(1) RJ-45
724-746-5500 | blackbox.com
Page 15
Chapter 2: Overview
2.4.10 ServSwitch CX Server Access Module, Mini DisplayPort, USB and Audio (KV1409A)
1
2
3
4
Figure 2-10. KV1409A.
Table 2-11. KV1409A connectors.
Callout
Number in
Figure 2-10
Connector
Description
1
2
3
4
(1) Mini DisplayPort M
Connects to Mini DisplayPort on target computer.
(1) 3.5-mm plug
(1) USB Type A M
(1) RJ-45
Connects to audio out port on target computer.
Connects to USB port on target computer.
Connects to ServSwitch CX or CX Uno.
724-746-5500 | blackbox.com
Page 16
Chapter 3: Installation
3. Installation
3.1 Installation Steps
1. Connect the ServSwitch CX or CX Uno to the RJ-45 port on the server access module (SAM).
2. Connect the remaining connectors to a compatible target computer.
3.2 Typical Applications
3.2.1 KV0081A or KV0161A
The SAMs work with the ServSwitch CX Uno, 8-Port (KV0081A), or ServSwitch CX Uno, 16-Port (KV0161A). They provide high-
end, multiplatform KVM switching over CATx with remote access. Place the remote console up to 984.3 feet (300 m) away. The
ServSwitch supports resolutions up to 1920 x 1200 at 60 Hz (when used at distances less than 328 feet [100 m]), and reads DDC
EDID from the display to avoid plug-and-play issues.
984 ft. (300 m) or less
KV0161A
328 ft.
(100 m)
or less
Figure 3-1. Application diagram #1.
3.2.2 KV0424A-R2
The SAMs also work with the ServSwitch CX, (1) Local Console Port + (4) Users, (24) Servers (KV0424A-R2). Up to four users can
access and control 24 multiplatform servers via CATx cable. The switch can support up to 1920 x 1200 resolution and can switch
via on-screen menus. This ServSwitch is ideal for small and mid-size data centers.
KV04AS-REM
KV04AS-REM
KV0424A-R2
KV1401A
KV0424A-R2
KV0424A-R2
KV1401A
KV1401A
Figure 3-2. Application diagram #2.
724-746-5500 | blackbox.com
Page 17
Chapter 3: Installation
3.2.3 KV1416A-R2
And, the SAMs work with the ServSwitch CX KVM Switch with IP, (1) Analog Console Port + (4) Users, (16)
Servers (KV1416A-R2). Run this multiplatform switch over CATx cable and access servers over the Internet. Connect one remote
user and up to three local users. IP support enables you to access servers remotely. This ServSwitch provides 1600 x 1200 remote
resolution with scalable windows.
LAN
IP user
KV1416A-R2
CATx
CATx
CATx
KV1401A
KV1401A
KV1401A
CATx
KV1401A
KV1401A
PCs
PCs
CATx
CATx
CATx
KV1401A
KV1401A
CATx
KV1401A
Figure 3-3. Application diagram #3.
NOTE: Refer to the ServSwitch CX or CX Uno user manual for more information.
724-746-5500 | blackbox.com
Page 18
Chapter 4: Troubleshooting
4. Troubleshooting
4.1 Contacting Black Box
If you determine that your Server Access Module is malfunctioning, do not attempt to alter or repair the unit. It contains no user-
serviceable parts. Contact Black Box Technical Support at 724-746-5500 or [email protected].
Before you do, make a record of the history of the problem. We will be able to provide more efficient and accurate assistance if
you have a complete description, including:
• the nature and duration of the problem.
• when the problem occurs.
• the components involved in the problem.
• any particular application that, when used, appears to create the problem or make it worse.
4.2 Shipping and Packaging
If you need to transport or ship your Server Access Module:
• Package it carefully. We recommend that you use the original container.
• If you are returning the unit, make sure you include everything you received with it. Before you ship for return or repair, contact
Black Box to get a Return Authorization (RA) number.
724-746-5500 | blackbox.com
Page 19
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com.
About Black Box
Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks
and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support
available in 30 seconds or less.
© Copyright 2012. Black Box Corporation. All rights reserved.
KV1400A, version 1
724-746-5500 | blackbox.com
|