Accton Technology Computer Accessories USB220 EC User Manual

USB Ethernet Adapter  
Quick Installation Guide  
Quick Installation Guide  
Installation  
Warning: Please view the README.TXT file on the Ethernet Adapter  
driver diskette for product related information.  
Install the driver as described below:  
Windows 95  
1. Connect the Type-A plug into the USB port on the computer.  
2. Insert the Driver Software Diskette.  
3. Double-click on My Computer.  
4. Double-click on 3-1/2 Floppy (A:).  
5. Double-click on Win95/Setup.exe.  
6. When prompted, connect the Type-B plug into the adapter.  
7. You will observe several loading status windows.  
8. If prompted to insert the Windows 95 CD-ROM, do so and  
click OK.  
9. When prompted to restart the computer, remove the  
diskette and click Yes.  
Windows 98  
1. Connect the Type-A plug into the USB port on the computer.  
2. Connect the Type-B plug into the adapter.  
3. Connect the adapter to the Ethernet network.  
4. The New Hardware Wizard displays.  
5. When prompted for the installation medium, check Floppy  
Disk Drive and insert the Driver Software Diskette.  
6. Follow displayed instructions.  
7. You will observe several loading status windows.  
8. When prompted to restart the computer, remove the  
diskette and click Yes.  
When the installation process is complete, remove the diskette  
from your drive and follow the instructions for restarting your  
PC. After rebooting your system, the USB Ethernet Adapter  
will appear to the system as a normal Ethernet network  
adapter card. For the LED definitions, see "LED functions"  
below.  
Note: If the Wizard does not appear when you plug in the Ethernet  
Adapter, please view the section "Is USB correctly installed" in the  
README.TXT file on the Ethernet Adapter driver diskette.  
Power Requirements  
USB devices can be either self-powered or bus-powered. A  
device which has no power connector is bus-powered, and  
derives its operating power from the USB connection directly.  
The Ethernet Adapter is bus-powered – all you need to do is  
plug it into a PC or USB hub (such as Accton’s USB204A).  
3
USB Ethernet Adapter  
LED Functions  
The Ethernet Adapter contains two LED's on the side panel of  
the RJ-45 connector. The left Green LED is LINK and the right  
Orange LED is Receive/Transmit activity. The operational status  
of the adapter is indicated by the LED conditions listed below.  
Link  
Activity  
Indication  
ON  
ON  
Power ON - LED's light initially for 3 seconds.  
Adapter is connected to the computer but not configured.  
Normal operation, no network activity.  
Flashing  
ON  
Flashing  
OFF  
ON  
ON  
Normal operation, network activity.  
OFF  
OFF  
OFF  
ON  
No network connection to the RJ-45 socket.  
Failed self-diagnostics at start-up.  
Always  
Always  
Ethernet configuration problem. Check all cabling.  
Flashing  
Flashing  
USB Application Diagram  
4
Quick Installation Guide  
EMIWarning  
FCC Class B Certification  
Accton Technology Corporation  
Model Numbers: USB220-EC  
FCC ID: HED1045USB  
This device complies with Part 15 of the FCC Rules. Operation  
is subject to the following conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, including  
interference that may cause undesired operation.  
Warning: This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to Part 15 of  
the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
· Reorient or relocate the receiving antenna  
· Increase the separation between the equipment and receiver  
· Connect the equipment into an outlet on a circuit different  
from the one which the receiver is connected to  
· Consult the dealer or an experienced radio/TV technician for help  
You are cautioned that changes or modifications not expressly  
approved by the party responsible for compliance could void  
your authority to operate the equipment.  
Attach unshielded or shielded Category 3, 4 or 5 twisted-pair  
cable to the RJ-45 port, and shielded USB cable to the USB port.  
Note: In order to maintain compliance with the limits of a Class  
B digital device, Accton requires that you use a quality  
interface cable when connecting to this device. Changes or  
modifications not expressly approved by Accton could void the  
user's authority to operate this equipment. Suggested cable  
type is 90USB cable for the USB port, and 100shielded or  
unshielded Cat. 3, 4 or 5 twisted-pair cable.  
Canadian Standards Association (CSA) Statement  
This digital apparatus does not exceed the Class B limits for  
radio noise emissions from digital apparatus as set out in the  
radio interference regulations of the Canadian Department of  
Communciations.  
Cet appareil numérique respecte les limites de bruits  
radioélectriques applicables aux appareils numériques de  
Classe B prescrites dans la norme sur le matériel brouilleur:  
"Appareils Numérques", NMB-003 édictée par le ministère des  
Communications.  
5
USB Ethernet Adapter  
VCCI Class B Compliance (Japan)  
EN55022 Declaration of Conformance  
This is to certify that the Accton USB220-SC is shielded against  
the generation of radio interference in accordance with the  
application of Council Directive 89/336/EEC, Article 4a.  
Conformity is declared by the application of EN55022:1987  
Class B (CISPR 22:1985/BS 6527:1988).  
CE Mark Declaration of Conformance  
This is to certify that this product complies with ISO/IEC Guide  
22 and EN45014. It conforms to the following specifications:  
EMC:  
EN55022(1988)/CISPR-22(1985)  
IEC 1000-4-2(1995)  
class B  
4kV CD, 8kV AD  
IEC 1000-4-3(1995)  
3V/m  
IEC 1000-4-4(1995)  
1kV - (power line)  
IEC 1000-4-6(1995)  
3Vrms  
This product complies with the requirements of the Low Voltage  
Directive 73/23/EEC and the EMC Directive 89/336/EEC.  
6
Quick Installation Guide  
Product Specifications  
Standards Conformance  
System Requirements  
USB Specification 1.0 (for USB low-power device)  
A PC that supports the Universal Serial Bus (Windows 98)  
Also requires device driver (included)  
Ports  
1USBB-Typereceptaclefordownstream(device)connections  
RJ-45 Ethernet port for 10BASE-T, 10Mbps connections  
USBport:90ŠshieldedUSBcable, 5m(16ft)max. length  
Ethernet port: 100ŠCategory 3,4,5 shielded/unshielded  
twisted-pair with max length of 100 m (328 ft)  
12 Mbps full speed on USB side, and up to 8 Mbps on  
Ethernet side  
Cable Wiring  
Access Method  
Dimensions  
Weight  
25.3 x 55.4 x 67.8 mm (1.0 x 2.18 x 2.67 in)  
50 g (1.76 oz)  
Input Power  
4.25~5.25 VDC, 0.5A max.  
(bus powered from USB host controller or hub)  
2.65 Watts maximum (from USB host)  
9.04 BTU/hr  
Power Consumption  
Heat Dissipation  
Environmental  
Temperature  
0°C - 40°C / 32°F -104°F (Standard Operating)  
-20°C - 70°C / -4°F - 160°F (Storage)  
5- 95% (Noncondensing)  
Humidity  
Certification  
CE Mark  
EN50081-1, EN55022 Class B  
EN50082-1, IEC 1000-4-2/3/4/6  
Emissions  
FCC Class B, VCCI Class B, CISPR Class B  
7
USB Ethernet Adapter  
Warranty  
Accton warrants to the original owner that the product delivered in this  
package will be free from defects in material and workmanship for the  
lifetime of the product. For the warranty to apply, you must register your  
purchase by returning the registration card indicating the date of purchase  
and including proof of purchase. There will be a minimal charge to  
replace consumable components, such as fuses, power transformers,  
and mechanical cooling devices. The warranty does not cover the  
product if it is damaged in the process of being installed. Accton  
recommends that you have the company from whom you purchased  
this product install it.  
THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY,  
WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT  
NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, OR ANY WARRANTY ARISING OUT  
OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. ACCTON SHALL  
NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.  
ACCTON NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO  
ASSUME FOR IT ANY OTHER LIABILITY.  
Copyright  
Copyright © 1999 by Accton Technology Corporation. All rights reserved.  
No part of this document may be copied or reproduced in any form or  
by any means without the prior written consent of Accton Technology  
Corporation.  
Accton makes no warranties with respect to this documentation and  
disclaims any implied warranties of merchantability, quality, or fitness  
for any particular purpose. The information in this document is subject  
to change without notice. Accton reserves the right to make revisions  
to this publication without obligation to notify any person or entity of  
any such changes.  
International Headquarters  
No. 1 Creation Road III,  
USA Headquarters  
P.O. Box 51420  
Science-based Industrial Park  
Hsinchu 300, Taiwan, R.O.C.  
Phone: 886-3-5770-270  
Irvine, CA 92619-1420  
Phone Numbers -  
Sales: 888-398-2101, 949-707-4800  
Support: 888-398-4101, 949-707-4847  
FAX: 886-3-5770-267  
Internet: [email protected]  
RMA:  
888-398-3101, 949-707-4828  
FAX: 949-707-2460  
Accton is a trademark of Accton Technology Corporation. Other  
trademarks or brand names mentioned herein are trademarks or  
registered trademarks of their respective companies.  
USB220-EC  
E0299-R01  
150007-102  

MTD 247 465A000 User Manual
MTD 243 645B000 User Manual
Maxtor DiamondMax 4A250J0 User Manual
La Crosse Technology WS 8056U User Manual
JVC KD S741R User Manual
Jabra LINK 280 User Manual
HTC Touch NIKI100 User Manual
Cecilware Coffee Brewers User Manual
Black Box RM195A R2 User Manual
Belkin OmniView F1DC108B SR User Manual