JVC KD S741R User Manual

CD RECEIVER

CD-RECEIVER

RECEPTEUR CD

CD-RECEIVER

KD-S73R/KD-S71R/

KD-S743R/KD-S741R

TP/PTY

SEL

SSM

DISP

11 RPT

12 RND

MODE

SCM

COMPACT

DIGITAL AUDIO

For installation and connections, refer to the separate manual.

Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.

Pour l’installation et les raccordements, se référer au manuel séparé.

Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de

desbetreffende handleiding.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

GET0118-001A

[E/EX]

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit ...............................

How to use the MODE button ...................

CD OPERATIONS ........................... 17

Playing a CD ............................................. 17

Locating a track or a particular portion

LOCATION OF THE BUTTONS ............

on a CD .................................................. 18

Selecting CD playback modes .................. 18

Prohibiting CD ejection ............................. 19

Control panel.............................................

BASIC OPERATIONS .......................

Turning on the power ................................

Setting the clock........................................

SOUND ADJUSTMENTS ................... 20

Adjusting the sound .................................. 20

Selecting preset sound modes.................. 20

Storing your own sound adjustments ........ 21

RADIO OPERATIONS ......................

Listening to the radio.................................

Storing stations in memory .......................

Tuning in to a preset station ......................

OTHER MAIN FUNCTIONS ................ 22

Selecting the level display ......................... 22

Selecting the telephone muting................. 22

Detaching the control panel ...................... 24

RDS OPERATIONS ......................... 10

What you can do with RDS ....................... 10

Other convenient RDS functions and

TROUBLESHOOTING ...................... 25

adjustments ............................................ 14

MAINTENANCE ............................. 26

Handling discs........................................... 26

SPECIFICATIONS ........................... 27

How to use the MODE button

If you press MODE, the unit goes into functions mode and the number buttons work as different

function buttons.

MODE

MO (monaural) indicator lights up.

11 RPT

12 RND

Time countdown indicator

To use these buttons as number buttons again after pressing MODE, wait for 5 seconds

without pressing any number button until the functions mode is cleared.

• Pressing MODE again also clears the functions mode.

BEFORE USE

*For safety....

*Temperature inside the car....

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

If you have parked the car for a long time in hot or

cold weather, wait until the temperature in the car

becomes normal before operating the unit.

LOCATION OF THE BUTTONS

Control panel

Display window

;

g h

MO ST RND RPT AF REG

SCM

TP PTY

2 3

4 5

6 7 8 9

TP/PTY

SEL

SSM

DISP

11 RPT

12 RND

MODE

SCM

(standby/on/attenuator) button

i SCM (sound control memory) button

o (control panel release) button

2 TP/PTY (traffic program/program type) button

3 SEL (select) button

4 Display window

5 Loading slot

6 0 (eject) button

7 CD button

Display window

; SCM (sound control memory) indicator

a CD source indicator

s FM band indicators (FM1, FM2, FM3)

d AM band indicator

f Tuner reception indicators

MO (monaural), ST (stereo)

g RND (random) indicator

h RPT (repeat) indicator

j RDS indicators

AF, REG, TP, PTY

k LOUD (loudness) indicator

l CD–in indicator

8 AM button

9 FM button

¢/4

buttons

• Also functions as SSM buttons when pressed

together.

q +/– buttons

w DISP (display) button

e MO (monaural) button

r Number buttons

t RPT (repeat) button

y RND (random) button

u MODE button

/ Main display

z Volume level indicator

BASIC OPERATIONS

TP/PTY

DISP

SEL

SSM

11 RPT

12 RND

MODE

SCM

Turning on the power

4 Adjust the sound as you want.

(See pages 20 and 21.)

1 Turn on the power.

To drop the volume in a moment

Press

briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

To turn off the power

Press and hold

for more than one second.

2 Select the source.

“SEE YOU” appears, then the unit turns off.

• If you turn off the power while listening to a

CD, CD play will start from where playback has

been stopped previously, next time you turn on

the power.

CAUTION on Volume Setting:

To operate the tuner (FM or AM),

see pages 7 – 16.

To play a CD,

CDs produce very little noise compared with other

sources. If the volume level is adjusted for the

tuner, for example, the speakers may be damaged

by the sudden increase in the output level.

Therefore, lower the volume before playing a CD

and adjust it as required during playback.

see pages 17 – 19.

3 Adjust the volume.

To increase the volume

Only for KD-S73R and KD-S71R

This receiver is equipped with the steering

wheel remote control function.

If your car is equipped with the steering wheel

remote controller, you can operate this

receiver using the controller.

To decrease the volume

Volume level appears.

• See the Installation/Connection Manual

(separate volume) for connection to utilize

this function.

Volume level indicator

TP/PTY

DISP

SEL

SSM

11 RPT

12 RND

MODE

SCM

Setting the clock

4 Set the clock system.

1 Select “24H/12H.”

You can also set the clock system to either 24

hours or 12 hours.

2 Select “24H” or “12H.”

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 23.)

SEL

5 Finish the setting.

SEL

2 Set the hour.

1 Select “CLOCK H” (hour) if not shown on

the display.

2 Adjust the hour.

To check the current clock time or change the

display mode

Press DISP (display) repeatedly.

DISP

Each time you press the

button, the display mode

changes as follows:

• During tuner operation:

Frequency

Clock

3 Set the minute.

Note:

1 Select “CLOCK M” (minute).

For the indication change during RDS operation,

2 Adjust the minute.

see page 15.

• During CD operation:

Elapsed playing time

Clock

• During power off:

The power turns on and the clock time is

shown for 5 seconds, then the power turns

off.

RADIO OPERATIONS

TP/PTY

DISP

SEL

SSM

11 RPT

12 RND

MODE

SCM

To stop searching before a station is

received, press the same button you have

pressed for searching.

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching a station manually:

Manual search

Searching a station automatically:

Auto search

1 Select the band (FM1 – 3, AM).

FM1

FM2

FM3

FM1

FM2

FM3

Note:

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

2 Press and hold

¢ or 4

until “M” (manual) starts flashing on

the display.

Selected band appears.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

2 Start searching a station.

To search stations of higher

frequencies

To search stations of lower

frequencies

When a station is received, searching stops.

CONTINUED ON THE NEXT PAGE

Storing stations in memory

3 Tune in to a station you want while

“M” (manual) is flashing.

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

To tune in to stations of higher

frequencies

To tune in to stations of lower

frequencies

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

• If you release your finger from the button,

the manual mode will automatically turns

off after 5 seconds.

You can preset 6 local FM stations in each FM

band (FM1, FM2, and FM3).

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for FM

and 9 kHz intervals for AM—MW/LW) until

you release the button.

1 Select the FM band (FM1 – 3) you

want to store FM stations into.

When an FM stereo broadcast is hard to

receive:

FM1

FM2

FM3

MODE

1 Press MODE to enter the

functions mode while listening

to an FM stereo broadcast.

2 Press and hold both buttons for

more than 2 seconds.

2 Press MO (monaural), while

still in the functions mode, so

that the MO indicator lights up

on the display.

SSM

Each time you press the

button, the MO indicator lights

up and goes off alternately.

MO (monaural) indicator

“- -SSM- -” appears, then disappears

when automatic preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2, or FM3).

These stations are preset in the number

buttons—No.1 (lowest frequency) to No.6

(highest frequency).

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

Manual preset

4 Repeat the above procedure to store

other stations into other preset

numbers.

You can preset up to 6 stations in each band

(FM1, FM2, FM3, and AM) manually.

Ex.: Storing FM station of 88.3 MHz into the

preset number 1 of the FM1 band.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

Tuning in to a preset station

FM1

FM2

FM3

You can easily tune in to a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on pages 8 and 9.

2 Tune in to a station (in this example,

of 88.3 MHz).

1 Select the band (FM1 – 3, AM).

To tune in to stations of higher

frequencies

To tune in to stations of lower

frequencies

FM1

FM2

FM3

2 Select the number (1 – 6) for the

preset station you want.

11 RPT

12 RND

3 Press and hold the number button

(in this example, 1) for more than 2

seconds.

“P1” flashes for a few seconds.

RDS OPERATIONS

What you can do with RDS

To use Network-Tracking Reception

You can select the different modes of network-

tracking reception to continue listening to the

same programme in its finest reception.

RDS (Radio Data System) allows FM stations to

send an additional signal along with their regular

programme signals. For example, the stations

send their station names, as well as information

about what type of programme they broadcast,

such as sports or music, etc.

Another advantage of RDS function is called

“Enhanced Other Networks.” By using the

Enhanced Other Networks data sent from a

station, you can tune in to a different station of a

different network broadcasting your favorite

programme or traffic announcement while

listening to another programme or to another

source such as CD.

When shipped from the factory, “AF” is selected.

• AF:

Network-Tracking Reception is

activated with Regionalization set to

“off.”

With this setting, the unit switches to

another station within the same

network when the receiving signals

from the current station become

weak. (In this mode, the programme

may differ from the one currently

received.)

The AF indicator lights up but the

REG indicator does not.

By receiving the RDS data, this unit can do the

following:

• Tracing the same programme automatically

(Network-Tracking Reception)

• Standby Reception of TA (Traffic

Announcement) or your favorite programme

• PTY (Programme Type) search

• Programme search

• AF REG: Network-Tracking Reception is

activated with Regionalization set to

“on.”

With this setting, the unit switches to

another station, within the same

network, broadcasting the same

programme when the receiving

signals from the current station

become weak.

• And some other functions

Tracing the same programme

automatically (Network-Tracking

Reception)

Both the AF indicator and the REG

indicators light up.

• OFF:

Network-Tracking Reception is

deactivated.

Neither the AF indicator nor the REG

indicator lights up.

When driving in an area where FM reception is

not good, the tuner built in this unit automatically

tunes in to another RDS station, broadcasting

the same programme with stronger signals. So,

you can continue to listen to the same

programme in its finest reception, no matter

where you drive. (See the illustration on page

16.)

REG

indicator

AF REG

Two types of the RDS data are used to make

Network-Tracking Reception work correctly—PI

(Programme Identification) and AF (Alternative

Frequency).

Without receiving these data correctly from the

RDS station you are listening to, Network-

Tracking Reception will not operate.

Using TA Standby Reception

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 23.)

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from

the current source (another FM station or CD).

SEL

• TA Standby Reception will not work if you are

listening to an AM station.

Press TP/PTY to activate TA Standby Reception.

2 Select “AF-REG” (alternative

frequency/regionalization reception)

if not shown on the display.

TP/PTY

7 When the current source is FM, the TP

indicator either lights up or flashes.

• If the TP indicator lights up, TA Standby

Reception is activated.

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically tunes in to

the station. The volume changes to the

preset TA volume level (see page 15) and the

traffic announcement can be heard.

• If the TP indicator flashes, TA Standby

Reception is not yet activated since the

station being received does not provide the

signals used for TA Standby Reception.

To activate TA Standby Reception, you need

to tune in to another station providing these

signals.

3 Select the desired mode—“AF,”

“AF REG,” or “OFF.”

Press

a station.

¢ or 4

to search for such

4 Finish the setting.

When a station providing these signals is

tuned in, the TP indicator stops flashing and

remains lit. Now TA Standby Reception is

activated.

SEL

7 When the current source is other than FM,

the TP indicator lights up.

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically changes the

source and tunes in to the station.

To deactivate the TA Standby Reception,

press TP/PTY again.

7 When the current source is FM, the PTY

indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

Using PTY Standby Reception

PTY Standby Reception allows the unit to switch

temporarily to your favorite programme (PTY:

Programme Type) from the current source

(another FM station or CD).

If a station starts broadcasting the selected

PTY programme, this unit automatically

tunes in to the station.

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated since the

station being received does not provide the

signals used for PTY Standby Reception.

To activate PTY Standby Reception, you

need to tune in to another station providing

these signals.

• PTY Standby Reception will not work if you are

listening to an AM station.

You can select your favorite programme type for

PTY Standby Reception.

When shipped from the factory, PTY Standby

Reception is turned off. (“OFF” is selected for

PTY Standby Reception.)

Press

¢ or 4

to search for such

a station.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 23.)

When a station providing these signals is

tuned in, the PTY indicator stops flashing

and remains lit. Now PTY Standby Reception

is activated.

7 When the current source is other than FM,

the PTY indicator lights up.

SEL

If a station starts broadcasting the selected

PTY programme, this unit automatically

changes the source and tunes in to the station.

2 Select “PTY STBY” (standby) if not

shown on the display.

To deactivate the PTY Standby Reception,

select “OFF” in step 3 on the left column. The

PTY indicator disappears.

3 Select one of the twenty-nine PTY

codes. (See page 16.)

Selected code name appears

on the display and is stored

into memory.

4 Finish the setting.

SEL

Searching your favorite programme

2 Select one of the twenty-nine PTY

codes. (See page 16.)

You can search any one of the PTY codes.

In addition, you can store your 6 favorite

programme types in the number buttons.

When shipped from the factory, the following 6

programme types have been stored in the

number buttons (1 to 6).

Selected code name appears

on the display.

To store your favorite programme types, see

below.

3 Press and hold the number button

for more than 2 seconds to store the

PTY code selected into the preset

number you want.

To search your favorite programme type, see

page 14.

11 RPT

12 RND

POP M

ROCK M

EASY M

CLASSICS

AFFAIRS

VARIED

“MEMORY” and the selected code name

alternate on the display.

To store your favorite programme types

1 Press and hold TP/PTY for more than

2 seconds while listening to an FM

station.

4 Press and hold TP/PTY for more than

2 seconds to exit from this mode.

TP/PTY

PTY

The last selected PTY code appears.

• If there is a station broadcasting a programme

of the same PTY code as you selected, that

station is tuned in.

• If there is no station broadcasting a programme

of the same PTY code as you selected, the

station will not change.

To search your favorite programme type

1 Press and hold TP/PTY for more than

2 seconds while listening to an FM

station.

TP/PTY

Note:

In some areas, the PTY search will not work correctly.

PTY

Other convenient RDS

The last selected PTY code appears.

functions and adjustments

2 To select one of your favorite

Automatic selection of the station

when using the number buttons

programme type

11 RPT

12 RND

Usually when you press the number button, the

preset station is tuned in.

However, when the preset station is an RDS

station, something different will happen. If the

signals from that preset station are not sufficient

for good reception, this unit, using the AF data,

tunes in to another frequency broadcasting the

same programme as the original preset station is

broadcasting. (Programme search)

To select any one of the twenty-nine

PTY-codes

• The unit takes some time to tune in to another

station using Programme search.

To activate Programme search, follow the

procedure below.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

appears on the display. (See page 23.)

Ex.: When “ROCK M” is selected

2 Press

¢ or 4

to select

“P(Programme)-SEARCH.”

3 Press

¢ or 4

search for your favorite programme.

to start PTY

3 Press + to select “ON.”

Now Programme search is activated.

4 Press SEL (select) to finish the setting.

To cancel Programme search, repeat the same

procedure and select “OFF” in step 3 by

pressing –.

Changing the display mode while

listening to an FM station

Setting the TA volume level

You can preset the volume level for TA Standby

Reception. When a traffic programme is received,

the volume level automatically changes to the

preset level.

You can change the initial indication on the

display to station name (PS NAME), station

frequency (FREQ), or clock time (CLOCK) while

listening to an FM RDS station.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

appears on the display. (See page 23.)

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

appears on the display. (See page 23.)

2 Press

(volume).

¢ or 4

to select “TA VOL”

2 Press

¢ or 4

“DISPMODE” (display mode).

to select

3 Press + or – to set to the desired volume.

You can set it from “VOL 00” to “VOL 50.”

4 Press SEL (select) to finish the setting.

3 Press + or – to set to the desired indication

(“PS NAME,” “FREQ,” or “CLOCK”).

4 Press SEL (select) to finish the setting.

Automatic clock adjustment

Note:

By pressing DISP (display), you can change the

display while listening to an FM RDS station.

Each time you press the button, the following

information appears on the display:

When shipped from the factory, the clock built in

this unit is set to be readjusted automatically using

the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock

adjustment, follow the procedure below.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

appears on the display. (See page 23.)

Station name

(PS NAME)

2 Press

¢ or 4

ADJ” (adjustment).

to select “AUTO

Station frequency

(FREQ)

3 Press – to select “OFF.”

Now automatic clock adjustment is canceled.

Programme type

(PTY)

4 Press SEL (select) to finish the setting.

To reactivate clock adjustment, repeat the same

Clock

(CLOCK)

procedure and select “ON” in step 3 by pressing +.

Note:

You must stay tuned to the same station for more than

2 minutes after setting “AUTO ADJ” to “ON.”

Otherwise, the clock time will not be adjusted. (This is

because the unit takes up to 2 minutes to capture the

CT data in the RDS signal.)

• Then, the display goes back to the original

indication in several seconds.

PTY codes

NEWS:

AFFAIRS:

News

CHILDREN: Entertainment programmes for

children

Topical programmes expanding

on current news or affairs

Programmes which impart

advice on a wide variety of

topics

SOCIAL:

Programmes on social activities

INFO:

RELIGION: Programmes dealing with any

aspect of belief or faith, or the

nature of existence or ethics

SPORT:

Sport events

PHONE IN: Programmes where people can

express their views either by

EDUCATE: Educational programmes

DRAMA: Radio plays

phone or in a public forum

CULTURE: Programmes on national or

regional culture

SCIENCE: Programmes on natural

science and technology

TRAVEL:

LEISURE:

JAZZ:

Programmes about travel

destinations, package tours, and

travel ideas and opportunities

Programmes concerned with

recreational activities such as

gardening, cooking, fishing, etc.

Jazz music

VARIED:

Other programmes like

comedies or ceremonies

Pop music

POP M:

ROCK M:

EASY M:

LIGHT M:

CLASSICS: Classical music

OTHER M: Other music

Rock music

Easy-listening music

Light music

COUNTRY: Country music

NATION M:

Current popular music from

another nation or region, in that

country’s language

Classic pop music

Folk music

OLDIES:

FOLK M:

WEATHER: Weather information

FINANCE:

Reports on commerce, trading,

the Stock Market, etc.

DOCUMENT: Programmes dealing with factual

matters, presented in an

investigative style

The same programme can be received on different frequencies.

Programme 1

broadcasting on

frequency A

Programme 1

broadcasting on

frequency E

Programme 1

broadcasting on

frequency B

Programme 1

broadcasting on

Programme 1

frequency C

broadcasting on

frequency D

CD OPERATIONS

TP/PTY

DISP

SEL

SSM

11 RPT

12 RND

MODE

SCM

All tracks will be played repeatedly until you stop

playback.

Playing a CD

Insert a CD into the loading slot.

Note:

The unit turns on,

draws the CD and

starts playback

automatically.

When a CD is inserted upside down, “EJECT” appears

on the display and the CD automatically ejects.

To stop play and eject the CD

Press 0.

Note on One-Touch Operation:

CD play stops and the CD automatically ejects

from the loading slot. The source changes to the

tuner (you will hear the last received station).

• If you change the source, CD play also stops

(without ejecting the CD).

When a CD is already in the loading slot, pressing

CD turns on the unit and starts playback

automatically.

The CD–in indicator flashes.

Next time you select “CD” as the source, CD

play starts from where playback has been

stopped previously.

Notes:

The CD–in indicator lights up.

• If the ejected CD is not removed for about 15

seconds, the CD is automatically inserted again

into the loading slot to protect it from dust.

(CD play will not start this time.)

• You can eject the CD even when the unit is turned

off.

About mistracking:

Mistracking may result from driving on extremely

rough roads. This does not damage the unit and

the CD, but will be annoying.

We recommend that you stop CD play while

driving on such rough roads.

Total playing time

of the inserted disc of the inserted disc

Total track number

Elapsed playing time Current track

Locating a track or a

Selecting CD playback modes

particular portion on a CD

To play back tracks at random

(Random Play)

To fast-forward or reverse the track

You can play back all tracks on the CD at random.

Press and hold

¢, while

MODE

1 Press MODE to enter the

functions mode while playing a

CD.

playing a CD, to fast-forward the

track.

Press and hold 4

playing a CD, to reverse the track.

, while

12 RND

2 Press RND (random), while

still in the functions mode, so

that the RND indicator lights

up on the display.

To go to the next or previous tracks

Each time you press the

button, CD random play mode

turns on and off alternately.

Press

¢ briefly, while playing

a CD, to go ahead to the beginning

of the next track.

Each time you press the button

consecutively, the beginning of the

next tracks is located and played

back.

RND indicator

RND

Press 4

briefly, while playing

a CD, to go back to the beginning

of the current track.

Each time you press the button

consecutively, the beginning of the

previous tracks is located and

played back.

When random play is turned on, the RND

indicator lights up on the display. A track

randomly selected starts playing.

To go to a particular track directly

Press the number button corresponding to the

track number to start its playback.

11 RPT

12 RND

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than one

second.

To play back tracks repeatedly

(Repeat Play)

Prohibiting CD ejection

You can prohibit CD ejection and can lock a CD

in the loading slot.

You can play back the current track repeatedly.

MODE

1 Press MODE to enter the

While pressing CD, press and hold 0 for

more than 2 seconds.

functions mode while playing a

CD.

11 RPT

2 Press RPT (repeat), while still

in the functions mode, so that

the RPT indicator lights up on

the display.

Each time you press the

button, CD repeat play mode

turns on and off alternately.

“EJECT” flashes on the display for about 5

seconds, and the CD is locked and cannot be

ejected.

RPT indicator

RPT

To cancel the prohibition and unlock the CD,

press 0 again for more than 2 seconds, while

pressing CD.

“EJECT” appears on the display, and the CD

ejects from the loading slot.

Track number of the

currently playing track

When repeat play is turned on, the RPT indicator

lights up on the display. The current track starts

playing repeatedly.

The CD–in indicator flashes.

SOUND ADJUSTMENTS

Adjusting the sound

2 Adjust the setting.

You can adjust the sound characteristics to your

preference.

To increase the level or turn

on the loudness

1 Select the item you want to adjust.

To decrease the level or turn

off the loudness

Each time you press the

SEL

button, the adjustable items

change as follows:

SCM

BAS

TRE

FAD

(bass)

(treble)

(fader)

Ex.: When you adjust “TRE” (treble)

VOL

LOUD

BAL

(volume)

(loudness)

(balance)

Note:

Normally, the + and – buttons work as the volume

control buttons. So you do not have to select “VOL”

to adjust the volume level.

Indication

To do:

Range

BAS

Adjust the bass.

–06 (min.)

+06 (max.)

TRE

Adjust the treble.

–06 (min.)

Selecting preset sound modes

+06 (max.)

You can select a preset sound adjustment

suitable to the music genre.

FAD*

BAL

Adjust the front

and rear speaker

balance.

R06 (Rear only)

Select the sound mode you want.

F06 (Front only)

SCM

Each time you press the

button, the sound mode

changes as follows:

Adjust the left

and right speaker

balance.

L06 (Left only)

R06 (Right only)

LOUD

Boost low and

high frequencies

to produce a well-

balanced sound

at low volume

level.

LOUD ON

SCM OFF

BEAT

SOFT

POP

LOUD OFF

SCM

VOL

Adjust the volume. 00 (min.)

Ex.: When you select “BEAT”

50 (max.)

* If you are using a two-speaker system, set the fader

level to “00.”

Indication

For:

Preset values

3 Adjust the bass or treble, or turn the

loudness function on/off (LOUD ON/

LOUD OFF).

BAS TRE LOUD

SCM OFF (Flat sound)

OFF

BEAT

SOFT

Rock or

disco music

+02

Quiet

background

music

+01 –03

+04 +01

OFF

POP

Light music

4 Repeat steps 2 and 3 to adjust the

other items.

Notes:

• You can adjust each sound mode to your preference,

and store it in memory.

5 Press and hold SCM until the sound

mode you have selected in step 1

flashes on the display.

If you want to adjust and store your original sound

mode, see “Storing your own sound adjustments”

below.

• To adjust the bass and treble reinforcement levels

or to turn on/off the loudness function, see page 20.

SCM

Your adjustment made for the

selected sound mode is stored

in memory.

6 Repeat the same procedure to store

other sound modes.

Storing your own sound

adjustments

To reset each sound mode to the factory

settings, repeat the same procedure and

reassign the preset values listed in the table on

the left column.

You can adjust the sound modes (BEAT, SOFT,

POP) to your preference and store your own

adjustments in memory.

• There is a time limit in doing the following

procedure. If the setting is canceled before you

finish, start from step 1 again.

1 Call up the sound mode you want to

adjust.

SCM

• See page 20 for details.

2 Select “BAS” (bass),“TRE” (treble),

or “LOUD” (loudness).

SEL

OTHER MAIN FUNCTIONS

Selecting the telephone muting

Selecting the level display

This mode is used when a cellular phone system

is connected. Depending on the phone system

used, select either “MUTING 1” or “MUTING 2,”

whichever mutes the sounds from this unit.

When shipped from the factory, this mode is

deactivated.

You can select the level display according to your

preference.

When shipped from the factory, “VOL 2” is selected.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(See page 23.)

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(See page 23.)

SEL

2 Select “LEVEL.”

2 Select “TEL” (telephone muting).

3 Select the desired mode—“VOL 1,”

“VOL 2,” or “OFF.”

3 Select the desired mode—“MUTING

1,”“MUTING 2,” or “OFF.”

• VOL 1: Shows the volume level indicator.

• VOL 2: Alternates “VOL 1” setting and

illumination display.

• MUTING 1: Select this if this setting can

mute the sounds.

• OFF:

Erases the volume level

indicator.

• MUTING 2: Select this if this setting can

mute the sounds.

4 Finish the setting.

• OFF:

Cancels the telephone

muting.

SEL

4 Finish the setting.

SEL

Preferred Setting Mode (PSM) items

SEL

Factory-preset See

settings

page

Set.

Hold.

Select.

–

Back

Advance

CLOCK H

CLOCK M

24H/12H

Hour adjustment

0:00

Back

12H

Advance

24H

Minute adjustment

24/12-hour time

display

24H

AUTO ADJ

DISPMODE

Automatic clock

setting

OFF

Display mode

CLOCK

PS NAME

10, 11

FREQ

OFF

AF-REG

Alternate frequency/

Regionalization

reception

AF REG

29 programme types

(see page 16)

PTY STBY

TA VOL

PTY standby

OFF

Traffic announcement

volume

VOL 00 – VOL 50

VOL 20

OFF

VOL 1

P-SEARCH

LEVEL

Programme search

Level display

VOL 2

OFF

TEL

Telephone muting

MUTING 1

MUTING 2

• Press SEL (select) to finish the setting.

Attaching the control panel

Detaching the control panel

1 Insert the left side of the control

panel into the groove on the panel

holder.

You can detach the control panel when leaving

the car.

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

1 Unlock the control panel.

2 Press the right side of the control

panel to fix it to the panel holder.

2 Lift and pull the control panel out of

the unit.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3 Put the detached control panel into

the provided case.

Connectors

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

• Sound cannot be heard

from the speakers.

The volume level is set to the Adjust it to the optimum level.

minimum level.

Connections are incorrect.

Check the cords and

connections.

• This unit does not work at

all.

The built-in microcomputer

may have functioned

While holding SEL (select),

press

for more than 2

incorrectly due to noise, etc.

seconds to reset the unit. (The

clock setting and preset stations

stored in memory are erased.)

(See page 2.)

• SSM (Strong-station

Sequential Memory)

automatic preset does not

work.

Signals are too weak.

Store stations manually.

• Static noise while listening

to the radio.

The antenna is not connected Connect the antenna firmly.

firmly.

• CD automatically ejects.

CD is inserted upside down.

Insert the CD correctly.

• CD-R/CD-RW cannot be

played back.

• Tracks on the CD-R/CD-RW

cannot be skipped.

CD-R/CD-RW is not finalized. • Insert a finalized CD-R/CD-RW.

• Finalize the CD-R/CD-RW

with the component which

you used for recording.

• CD can be neither played

back nor ejected.

CD is locked.

Unlock the CD. (See page 19.)

While holding , press

0 for more than 2 seconds. Be

careful not to drop the CD when

it is ejected.

The CD player may function

incorrectly.

You are driving on rough

roads.

Stop playback while driving on

rough roads.

• CD sound is sometimes

interrupted.

CD is scratched.

Change the CD.

Connections are incorrect.

Check the cords and

connections.

No CD in the loading slot.

CD is inserted incorrectly.

Insert a CD into the loading slot.

Insert the CD correctly.

• “NO DISC” appears on the

display.

MAINTENANCE

Handling discs

When playing a CD-R or CD-RW

Before playing back CD-Rs or CD-RWs, read

their instructions or cautions carefully.

• Use only “finalized” CD-Rs or CD-RWs.

• Some CD-Rs or CD-RWs may not play back on

this unit because of their disc characteristics,

and for the following reasons:

– Discs are dirty or scratched.

– Moisture condensation on the lens inside the

unit.

– The pickup lens inside the unit is dirty.

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower than

that of regular CDs.

• CD-Rs or CD-RWs are susceptible to high

temperatures or high humidity, so do not leave

them inside your car.

• Do not use following CD-Rs or CD-RWs:

– Discs with stickers, labels, or protective seal

stuck to the surface.

This unit has been designed to reproduce CDs,

CD-Rs (Recordable), and CD-RWs (Rewritable).

• This unit is not compatible with MP3 discs.

How to handle CDs

When removing a CD from its

case, press down the center

holder of the case and lift the CD

out, holding it by

Center holder

the edges.

• Always hold the CD by the edges. Do not touch

its recording surface.

When storing a CD into its case, gently insert

the CD around the center holder (with the printed

surface facing up).

• Make sure to store CDs into the cases after use.

– Discs on which labels can be directly printed

by an ink jet printer.

Using these discs under high temperatures or

high humidity may cause malfunctions or

damage to discs. For example,

– Stickers or labels may shrink and warp a disc.

– Stickers or labels may peel off so discs

cannot be ejected.

To keep CDs clean

A dirty CD may not play correctly. If

a CD does become dirty, wipe it

with a soft cloth in a straight line

from center to edge.

To play new CDs

– Print on discs may get sticky.

Read instructions or cautions about labels and

printable discs carefully.

New CDs may have some rough

spots around the inner and outer

edges. If such a CD is used, this

unit may reject the CD.

To remove these rough spots, rub

the edges with a pencil or ball-point pen, etc.

CAUTIONS:

• Do not insert 8 cm CDs (single CDs) into the

loading slot. (Such CDs cannot be ejected.)

• Do not insert any CD of unusual shape—like a

heart or flower; otherwise, it will cause a

malfunction.

• Do not expose CDs to direct sunlight or any

heat source or place them in a place subject to

high temperature and humidity. Do not leave

them in a car.

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the CD and leave

the unit turned on for a few hours until the

moisture evaporates.

• Do not use any solvent (for example,

conventional record cleaner, spray, thinner,

benzine, etc.) to clean CDs.

Sticker

Stick-on

label

Sticker

residue

Warped

disc

Disc

SPECIFICATIONS

CD PLAYER SECTION

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Type: Compact disc player

Front:

Rear:

45 W per channel

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Continuous Power Output (RMS):

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Front:

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

Rear:

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

GENERAL

Power Requirement:

Tone Control Range:

Bass:

10 dB at 100 Hz

10 dB at 10 kHz

Operating Voltage:

Treble:

DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C

Dimensions (W × H × D):

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Installation Size (approx.):

182 mm × 52 mm × 150 mm

Panel Size (approx.):

188 mm × 58 mm × 11 mm

Mass (approx.):

TUNER SECTION

Frequency Range:

1.3 kg (excluding accessories)

FM:

AM:

87.5 MHz to 108.0 MHz

(MW) 522 kHz to 1 620 kHz

(LW) 144 kHz to 279 kHz

[FM Tuner]

Usable Sensitivity:

11.3 dBf (1.0 µV/75 Ω)

Design and specifications are subject to change

without notice.

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Haben Sie PROBLEME mit dem Betrieb?

Bitte setzen Sie Ihr Gerät zurück

Siehe Seite Zurücksetzen des Geräts

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

Hebt u PROBLEMEN met de bediening?

Stel het apparaat terug

Zie de pagina met de paragraaf Het apparaat terugstellen

1202KKSMDTJEIN

EN, GE, FR, NL

KD-S73R/KD-S71R/

KD-S743R/KD-S741R

Installation/Connection Manual

Einbau/Anschlußanleitung

Manuel d’installation/raccordement

Handleiding voor installatie/aansluiting

GET0118-004A

[E/EX]

1202KKSMDTJEIN

EN, GE, FR, NL

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

• This unit is designed to operate on 12 V DC,

NEGATIVE ground electrical systems.

• Dieses Gerät ist für einen Betrieb in elektrischen

Anlagen mit 12 V Gleichstrom und (–) Erdung

ausgelegt.

• Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE.

• Dit apparaat mag worden gebruikt bij elektrische

systemen die werken op 12 V gelijkstroom met negatieve

aarding.

INSTALLATION

EINBAU

INSTALLATION (MONTAGE

INSTALLATIE (INBOUW IN

(IN-DASH MOUNTING)

(IM ARMATURENBRETT)

DANS LE TABLEAU DE BORD) HET DASHBOARD)

• The following illustration shows a typical installation. • Die folgende Abbildung zeigt einen typischen

• L’illustration suivante est un exemple d’installation

typique. Cependant, vous devez faire les

ajustements correspondant à votre voiture

particulière. Si vous avez des questions ou avez

besoin d’information sur des kits d’installation,

consulter votre revendeur d’autoradios JVC ou une

compagnie d’approvisionnement.

• Op de volgende afbeelding kunt u zien hoe de installatie,

However, you should make adjustments

corresponding to your specific car. If you have any

questions or require information regarding

installation kits, consult your JVC IN-CAR

ENTERTAINMENT dealer or a company supplying

kits.

Einbau. Dennoch müssen Sie entsprechend Ihrem

jeweiligen Auto Anpassungen vornehmen. Bei

irgendwelchen Fragen oder wenn Sie

Informationen hinsichtlich des Einbausatzes

brauchen, wenden Sie sich an ihren JVC

Autoradiohändler oder ein Unternehmen das diese

Einbausätze vertreibt.

normaal gesproken, in zijn werk gaat. U moet echter bij

de installatie rekening houden met de bijzonderheden

van uw eigen auto. Neem bij vragen of voor meer

bijzonderheden over inbouwpakketten contact op met uw

JVC car audio dealer of een dealer of een bedrijf dat

inbouwpakketten levert.

1 Before mounting: Press

(control panel

release button) to detach the control panel if

already attached.

1 Vor dem Einbau: Drücken Sie

(Freigabe der 1 Avant le montage: Appuyer sur

(déblocage

du panneau de commande) pour éventeullement

détacher le panneau de commande.

1 Voordat u aan de montage van het apparaat

Schalttafel), um die Arretierung der Schalttafel zu

lösen, sofern diese bereits angebracht ist.

begint: Druk op

(het bedieningspaneel

vrijgeven) als u het bedieningspaneel wilt

loskoppelen indien dit aan de eenheid is

vastgekoppeld.

* When shipped from the factory, the control

panel is packed in the hard case.

* Bei der Auslieferung ab Werk ist die Schalttafel

im Etui verpackt.

* Lorsque ce panneau de commande sort d’usine,

il est rangé dans un étui de transport.

* Standaard wordt het bedieningspaneel bij het

verlaten van de fabriek los verpackt meegeleverd.

2 Den Frontrahmen herausnehmen.

2 Retirer la plaque d’assemblage.

2 Remove the trim plate.

3 Die Halterung nach dem Entriegeln der

3 Libérer les verrous du manchon et retirer le

3 Remove the sleeve after disengaging the sleeve

2 Verwijder de sierplaat.

Halterungensperren abnehmen.

manchon.

locks.

3 Verwijder het huis nadat u de klemmen hebt

1 Das Gerät aufstellen.

1 Poser l’appareil à la verticale.

1 Stand the unit.

losgemaakt.

Hinweis: Beim Aufstellen des Geräts darauf

achten, daß die Sicherung auf der Rückseite

nicht beschädigt wird.

Remarque: Lorsque vous mettez l’appareil à la

verticale, faire attention de ne pas

endommager le fusible situé sur l’arrière.

Note: When you stand the unit, be careful

not to damage the fuse on the rear.

1 Zet het apparaat rechtop.

Opmerking: Wanneer u het apparaat rechtop

zet, moet u erop letten dat u de zekering aan de

achterkant niet beschadigt.

2 Insert the 2 handles between the unit and

the sleeve, as illustrated, to disengage the

sleeve locks.

2 Die 2 Griffe zwischen dem Gerät und der

Halterung wie abgebildet einstecken und die

Halterungensperren entriegeln.

2 Insérer les 2 poignées entre l’appareil et le

manchon comme indiqué pour désengagé les

verrous de manchon.

2 Plaats de 2 hendels, zoals afgebeeld, tussen het

apparaat en het huis, om de klemmen los te

maken.

3 Remove the sleeve.

3 Die Halterung entfernen.

3 Retirer le manchon.

Note: Be sure to keep the handles for future

use after installing the unit.

Hinweis: Sicherstellen, daß die Griffe für

künftigen Gebrauch nach dem Einbau des

Geräts aufbewahrt werden.

Remarque: S’assurer de garder les poignées

pour une utilisation ultérieur, après l’installation

de l’appareil.

3 Verwijder het huis.

4 Install the sleeve into the dashboard.

Opmerking: Bewaar de hendels nadat u het

apparaat hebt geïnstalleerd, zodat u ze ook in de

toekomst kunt gebruiken.

* After the sleeve is correctly installed into the

dashboard, bend the appropriate tabs to hold

the sleeve firmly in place, as illustrated.

4 Die Halterung im Armaturenbrett einbauen.

4 Installer le manchon dans le tableau de bord.

* Nach dem korrekten Einbau der Halterung im

Armaturenbrett, die entsprechenden Riegel

umknicken, um die Halterung an ihrem Platz zu

sichern, siehe Abbildung.

* Après installation correcte du manchon dans le

tableau de bord, plier les bonnes pattes pour

maintenir fermement le manchon en place,

comme montré.

4 Installeer het huis in het dashboard.

* Nadat het huis op de juiste wijze in het dashboard

is geplaatst, moet u de palletjes, zoals afgebeeld,

stevig op hun plaats duwen.

5 Fix the mounting bolt to the rear of the unit’s

body and place the rubber cushion over the end

of the bolt.

5 Die Befestigungsschraube an der Rückseite des

Gerätekörpers befestigen und das Ende der

Schraube mit einem Gummipuffer abdecken.

5 Monter le boulon de montage sur l’arrière du corps

de l’appareil puis passer l’amortisseur en

caoutchouc sur l’extrémité du boulon.

5 Maak de bevestigingsbout aan de achterkant van het

apparaat vast en plaats de rubberdop over het uiteinde

van de bout.

6 Do the required electrical connections.

7 Slide the unit into the sleeve until it is locked.

8 Attach the trim plate.

6 Nehmen Sie die erforderlichen elektrischen

6 Réalisez les connexions électriques.

Anschlüsse vor.

6 Breng de vereiste elektrische verbindingen tot stand.

7 Faire glisser l’appareil dans le manchon jusqu’à ce

7 Das Gerät in die Halterung schieben, bis es

7 Schuif het apparaat in het huis totdat het vergrendeld

9 Attach the control panel.

qu’il soit verrouillé.

einrastet.

is.

8 Attachez la plaque d’assemblage.

9 Remonter le panneau de commande.

8 Bevestig een sierplaat.

9 Bevestig het bedieningspaneel.

8 Befestigen Sie den Frontrahmen.

9 Die Schalttafel anbringen.

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Trim plate

Frontrahmen

Plaque d’assemblage

Sierplaat

Dashboard

Armaturenbrett

Tableau de bord

Dashboard

Handle

Griff

Poignée

Rubber cushion

Gummipuffer

Amortisseur en caoutchouc

Rubberdop

Hendel

184 mm

Sleeve

53 mm

Lock Plate

Halterung

Manchon

Huis

Arretierplättchen

Plaque de verrouillage

Vergrendelingsplaat

Slot

Mounting bolt

Schlitz

Fente

Sleuf

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Fuse

Sicherung

Fusible

Zekering

See “ELECTRICAL CONNECTIONS.”

Siehe „ELEKTRISCHE ANSCHLÜSSE“.

Référez-vous “RACCORDEMENTS

ELECTRIQUES” .

4 *

Zie “ELEKTRISCHE VERBINDINGEN”.

Trim plate

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Frontrahmen

Sleeve

Plaque d’assemblage

Halterung

Manchon

Huis

Sierplaat

• When using the optional stay

• When installing the unit without using the sleeve

• Beim Einbau des Geräts ohne Halterung

• Beim Verwenden der Anker-Option

• Lors de l’utilisation du hauban en option

• Wanneer u de steun gebruikt (facultatief)

• Lors de l’installation de l’appareil scans utiliser de manchon

• Wanneer u het apparaat zonder huis installeert

In a Toyota for example, first remove the car radio and install the unit in its place.

Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.

Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.

Voorbeeld: Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren.

Fire wall

Feuerwand

Cloison

Washer

Unterlegscheibe

Rondelle

Stay (option)

Anker (Option)

Hauban (en option)

Steun (facultatief)

Brandscherm

Sluitring

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

* Not included with this unit.

* Nicht Teil dieses Geräts.

* Non fourni avec cet appareil.

Lock nut

Platkopschroeven (M5 x 6 mm)*

Sicherungsmutter

Ecrou d’arrêt

Contra-moer

* Niet meegeleverd.

Dashboard

Armaturenbrett

Tableau de bord

Dashboard

Bracket*

Konsole*

Support*

Console*

Screw (option)

Schraube (Option)

Vis (en option)

Schroef (facultatief)

Sleeve

Pocket

Taschen

Poche

Halterung

Manchon

Huis

Mounting bolt

Flat type screws (M5 x 6 mm)*

Senkkopfschrauben (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Platkopschroeven (M5 x 6 mm)*

Befestigungsschraube

Boulon de montage

Bevestigingsbout

Zak

Bracket*

Konsole*

Support*

Console*

Install the unit at an angle of less

than 30˚.

Stellen Sie das Gerät mit einem

Winkel von weniger als 30˚ auf.

Installez l’appareil avec un angle

de moins de 30˚.

Note

: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If longer screws are

used, they could damage the unit.

: Beim Anbringen des Gerät an der Konsole sicherstellen, daß 6 mm lange Schrauben verwendet werden.

Werden längere Schrauben verwendet, können sie das Gerät beschädigen.

Less than 30˚

Hinweis

Weniger als 30˚

Moins de 30˚

Kleiner dan 30˚

Remarque : Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une longueur de 6 mm.

Si des vis plus longues sont utilisées, elles peuvent endommager l’appareil.

Opmerking : Wanneer u het apparaat aan de bevestigingsklem vastmaakt, moet u de 6 mm lange schroeven gebruiken. Als u langere

Installeer het toestel met een hoek

kleiner dan 30˚.

schroeven gebruikt, kan het apparaat worden beschadigd.

Removing the unit

^•1^BeR^foe^rm^eo^reve^mt^oh^veⁱⁿc^go^tn^htr^eo^ul ⁿpa^it,n^re^el.^{lease the rear section.}

Ausbau des Geräts

• Vor dem Ausbau des Geräts den hinteren Teil

Retrait de l’appareil

Verwijderen van het apparaat

• Voordat u het apparaat verwijdert, moet u het

^•1^AvR^aeⁿt^tir^de^er ^rle^etp^ira^en^rn^l’e^aa^pu^pad^re^eic^l,o^lim^bém^rea^rnd^lae.^{section arrière.}

1^freD^ige^en^bS^ecⁿh^.alttafel abnehmen.

1^acV^hte^er^rw^geij^dd^ee^er^lth^ee^lt^ob^se^md^aie^kn^eiⁿn^.gspaneel.

Remove the trim plate.

Retirer la plaque d’assemblage.

Den Frontrahmen herausnehmen.

Verwijder de sierplaat.

Insert the 2 handles into the slots, as shown.

Introduire les 2 poignées dans les fentes, comme

montré. Puis, tout en tirant doucement les

poignées écartées, faire glisser l’appareil pour le

sortir. (S’assurer de conserver les poignées

après l’installation de l’appareil.)

Then, while gently pulling the handles away from 3 Die 2 Griffe in die Schlitze wie gezeigt stecken.

Plaats de 2 hendels, zoals afgebeeld, in de sleuven.

Daarna duwt u de hendels zachtjes uit elkaar en kunt u

het apparaat naar buiten schuiven. (Bewaar de hendels

nadat u het apparaat hebt geïnstalleerd!)

each other, slide out the unit. (Be sure to keep

Dann die Griffe behutsam auseinander ziehen

und das Gerät herausziehen. (Die Griffe nach

dem Einbau auf jeden Fall aufbewahren.)

the handles after installing it.)

Control panel

Schalttafel

Panneau de commande

Bedieningspaneel

Trim plate

Frontrahmen

Plaque d’assemblage

Sierplaat

Handle

Griff

Poignée

Hendel

Parts list for installation and

Teileliste für den Einbau und

Liste des pièces pour l’installation et Lijst van onderdelen die u bij

connection

Anschluß

raccordement

installatie en aansluiting nodig hebt

De volgende onderdelen worden bij het apparaat geleverd.

Installeer ze op de juiste wijze, nadat u ze hebt

gecontroleerd.

The following parts are provided with this unit.

After checking them, please set them correctly.

Die folgenden Teile werden zusammen mit diesem

Gerät geliefert.

Nach ihrer Überprüfung, die Teile richtig einsetzen.

Les pièces suivantes sont fournies avec cet appareil.

Après vérification, veuillez les placer correctement.

Hard case/Control panel

Etui/Schalttafel

Etui de transport/Panneau de

commande

Sleeve

Trim plate

Halterung

Manchon

Huis

Frontrahmen

Plaque d’assemblage

Sierplaat

Power cord

Stromkable

Cordon d’alimentation

Stroomkabel

Behuizing/Bedieningspaneel

Handles

Griffe

Poignées

Hendels

Washer (ø5)

Unterlegscheibe(ø5)

Rondelle (ø5)

Lock nut (M5)

Mounting bolt (M5 x 20 mm)

Rubber cushion

Gummipuffer

Amortisseur en caoutchouc

Rubberdop

Sicherungsmutter (M5)

Ecrou d’arrêt (M5)

Contra-moer (M5)

Befestigungsschraube (M5 x 20 mm)

Boulon de montage (M5 x 20 mm)

Bevestigingsbout (M5 x 20 mm)

Sluitring (ø5)

TROUBLESHOOTING

FEHLERSUCHE

EN CAS DE DIFFICULTES

PROBLEMEN OPLOSSEN

• The fuse blows.

• Die Sicherung brennt durch.

* Sind die roten und schwarzen Leitungen richtig

angeschlossen?

• Le fusible saute.

• De zekering slaat door.

* Zijn de rode en de zwarte draden op de juiste manier

aangesloten?

* Are the red and black leads connected correctly?

* Les fils rouge et noir sont-ils racordés

correctement?

• Power cannot be turned on.

* Is the yellow lead connected?

• Stromversorgung kann nicht eingeschaltet

werden.

* Ist die gelbe Leitung angeschlossen?

• L’appareil ne peut pas être mise sous tension.

* Le fil jaune est-elle raccordée?

• De stroom kan niet worden ingeschakeld.

* Is de gele draad aangesloten?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Pas de son des enceintes.

* Le fil de sortie d’enceinte est-il court-circuité?

• Er komt geen geluid uit de speakers.

* Is de uitgaande speakerdraad kortgesloten?

• Kein Ton aus den Lautsprechern.

* Ist die Lautsprecherausgangsleitung

kurzgeschlossen?

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded

in common?

• Le son est déformé.

• Het geluid wordt vervormd.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

* Is de uitgaande speakerdraad geaard?

* Zijn de “–” polen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

• Ton verzerrt.

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

• Unit becomes hot.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded

in common?

• L’appareil devient chaud.

• Het apparaat raakt verhit.

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-

elles mises ensemble à la masse?

* Is de uitgaande speakerdraad geaard?

* Zijn de “–” polen van de linker- en de rechterspeakers

gemeenschappelijk geaard?

• Gerät wird heiß.

* Ist die Lautsprecherausgangsleitung geerdet?

* Sind die (–) Anschlußklemmen der linken und

rechten Lautsprecher zusammen geerdet?

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHLÜSSE

RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN

To prevent short circuits, we recommend that you

Zur Vermeidung von Kurzschlüssen empfehlen wir,

Pour éviter tout court-circuit, nous vous

Om kortsluiting te voorkomen adviseren wij u om de

disconnect the battery’s negative terminal and make daß Sie den negativen Batterieanschluß abtrennen

recommandons de débrancher la borne négative de la minpool van de accu los te maken en alle elektrische

all electrical connections before installing the unit. If

you are not sure how to install this unit correctly,

have it installed by a qualified technician.

und alle elektrischen Anschlüsse herstellen, bevor das batterie et d’effectuer tous les raccordements

verbindingen tot stand te brengen voordat u het apparaat

Gerät eingebaut wird. Sind Sie sich über den richtigen électriques avant d’installer l’appareil. Si l’on n’est pas

in de auto installeert. Als u niet zeker weet hoe u dit

apparaat moet installeren, kunt u dit beter door een

daartoe gekwalificeerde technicus laten doen.

Einbau des Geräts nicht sicher, lassen Sie es von

einem qualifizierten Techniker einbauen.

sûr de pouvoir installer correctement cet appareil, le

faire installer par un technicien qualifié.

Note:

This unit is designed to operate on 12 V DC,

NEGATIVE ground electrical systems. If your

Hinweis:

Remarque:

Opmerking:

Dieses Gerät ist für einen Betrieb in elektrischen

Cet appareil est conçu pour fonctionner sur des

sources de courant continu de 12 V à masse

NEGATIVE. Si votre véhicule n’offre pas ce type

Dit apparaat mag worden gebruikt bij elektrische

systemen die werken op 12 V gelijkstroom met

negatieve aarding. Als uw auto niet is uitgerust met

vehicle does not have this system, a voltage inverter Anlagen mit 12 V Gleichstrom und (–) Erdung

is required, which can be purchased at JVC IN-CAR ausgelegt. Verfügt Ihr Fahrzeug nicht über diese

ENTERTAINMENT dealers.

Anlage, ist ein Spannungsinverter erforderlich, der bei

JVC Autoradiohändler erworben werden kann.

d’alimentation, il vous faut un convertisseur de tension, een dergelijk systeem, is een spanningsomzetter vereist.

que vous pouvez acheter chez un revendeur

d’autoradios JVC.

Dit instrument kan worden aangeschaft bij JVC car audio

dealers.

• Replace the fuse with one of the specified rating. If

the fuse blows frequently, consult your JVC IN-

CAR ENTERTAINMENT dealer.

• Die Sicherung mit einer der entsprechenden

Nennleistung ersetzen. Brennt die Sicherung häufig

durch, wenden Sie sich an ihren JVC

Autoradiohändler.

• Sind Störgeräusche ein Problem...

• Remplacer le fusible par un de la valeur précisée. Si

le fusible saute souvent, consulter votre revendeur

d’autoradios JVC.

• Vervang de zekering door een exemplaar met het

aangegeven vermogen. Als de zekering vaak doorslaat,

moet u uw JVC car audio dealer raadplegen.

• Als u geluidsproblemen hebt…

• If noise is a problem...

This unit incorporates a noise filter in the power

circuit. However, with some vehicles, clicking or

other unwanted noise may occur. If this happens,

connect the unit’s rear ground terminal (see

connection diagram) to the car’s chassis using

shorter and thicker cords, such as copper braiding

or gauge wire. If noise still persists, consult your

JVC IN-CAR ENTERTAINMENT dealer.

• Si le bruit est un problème...

Dieses Gerät enthält ein Störfilter im Stromkreis. Bei

manchen Fahrzeugen kann jedoch ein Klicken oder

andere unerwünschte Störgeräusche auftreten.

Sollte das der Fall sein, die hintere

Erdungscanschlußklemme (siehe Schaltplan) des

Geräts am Fahrwerk des Fahrzeugs anschließen,

dabei kürzere und dickere Kabel wie beispielsweise

Kupfergeflechtdraht oder Stahldraht verwenden.

Bleibt Störgeräusch bestehen, wenden Sie sich an

Ihren JVC Autoradiohändler.

• Die maximale Eingangsleistung der Lautsprecher

sollte mehr als 45 W hinten und 45 W vorn bei einer

Impedanz von 4 Ω bis 8 Ω.

• Sicherstellen, daß das Gerät am Fahrwerk

geerdet wird.

Cet appareil incorpore un filtre de bruit dans le circuit

d’alimentation. Cependant, avec certains véhicules,

quelques claquements ou autres bruits non désirés

risquent de se produire. Si cela arrive, raccorder la

borne arrière de masse de l’appareil au châssis de

la voiture (voir le diagramme de raccordement) en

utiliscant des cordons les plus gros et les plus courts

possibles telle qu’une barre de cuivre ou une tresse.

Si le bruit persiste, consulter votre revendeur

d’autoradios JVC.

• La puisscance admissible des enceintes devrait

supérieure à 45 W à l’arrière et à 45 W l’avant, avec

une impédance de 4 Ω à 8 Ω.

• S’assurer de raccorder la mise à la masse de cet

appareil au châssis de la voiture.

De krachtschakeling van dit apparaat heeft een

ingebouwd geluidsfilter. In sommige voertuigen zijn

tikgeluiden of andere ongewenste geluiden te horen. Als

dit gebeurt, moet u de massaklem aan de

achterkant (zie aansluitingsschema) aan het chassis

van de auto vastmaken met behulp van een kortere en

dikkere kabel, zoals kopermanteldraad of tellerkabel.

Als het geluid niet verdwijnt, moet u contact opnemen

met uw JVC car audio dealer.

• Het maximum ingangsvermogen van de speakers moet

achterin meer dan 45 W zijn en voorin 45 W, met een

impedantie van 4 Ω tot 8 Ω.

• Zorg ervoor dat dit apparaat door middel van

een aardkabel is verbonden met het chassis

van de auto.

• Maximum input of the speakers should be more

than 45 W at the rear and 45 W at the front, with

an impedance of 4 Ω to 8 Ω.

• Be sure to ground this unit to the car’s chassis.

• The heat sink becomes very hot after use. Be

careful not to touch it when removing this unit.

Heat sink

Abstrahlblech

Dissipateur de chaleur

Warmte-opnemer

• Das Abstrahlblech wird nach dem Gebrauch sehr

heiß. Beim Ausbau des Geräts darauf achten, das

Abstrahlblech nicht zu berühren.

• Le dissipateur de chaleur devient très chaud après

usage. Faire attention de ne pas le toucher en

retirant cet appareil.

• De warmte-opnemer kan na gebruik erg heet worden.

Raak de warmte-opnemer niet aan wanneer u dit

apparaat van zijn plaats haalt.

Typical Connections / Typische Anschlüsse / Raccordements typiques / Normale verbindingen

Before connecting: Check the wiring in the vehicle

carefully. Incorrect connection may cause serious

damage to this unit.

The leads of the power cord and those of the

connector from the car body may be different in

color.

Vor dem Anschließen: Die Verdrahtung im Fahrzeug

sorgfältig überprüfen. Falsche Anschlüsse können

ernsthafte Schäden am Gerät hervorrufen.

Avant de commencer la connexion: Vérifiez

attentivement le câblage du véhicule. Une connexion

incorrecte peut endommager sérieusement l’appareil.

Alvorens de verbindingen tot stand te brengen:

Moet u de bedrading in de auto zorgvuldig. Het apparaat

kan door verkeerde verbindingen ernstige schade oplopen.

Die Leiter des Stromkabels und die Leiter des Anschlusses Le fil du cordon d’alimentation et ceux des connecteurs De draden van het stroomsnoer verschillen mogelijk van

im Fahrzeug können sich farblich unterscheiden.

du châssis de la voiture peuvent être différents en

couleur.

kleur metde aansluitingen op het chassis van de auto.

Die farbigen Leitungen des Spannunsgversorgungskabels

an der Autobatterie, den Lautsprechern und dem

Motorantenne (sofern vorhanden) in folgender

Reihenfolge anschließen.

1 Sluit de gekleurde snoerdraden van de stroomkable in

de hierna genoemde volgorde aan op de accu van de

auto, de luidsprekers en de antenne (indien aanwezig).

1 Zwart: aarde

1 Connect the colored leads of the power cord to

the car battery, speakers and power aerial (if any)

in the following sequence.

1 Connectez les fils de couleur du cordon

d’alimentation à la batterie de la voiture, aux

enceintes et à l’antenne automatique (s’il y en a

une) dans l’ordre suivant.

1 Black: ground

2 Yellow: to car battery (constant 12 V)

3 Red: to an accessory terminal

4 Blue with white stripe: to remote lead of other

equipment or power aerial if any (200 mA max.)

5 Brown: to cellular phone system (For details,

refer to the instructions of the cellular phone.)

6 Others: to speakers

1 Schwarz: Erdung

2 Geel: naar de accu van de auto (constant 12 V)

3 Rood: naar de aansluitklem van de accessoire

4 Blauw met witte streep: naar afstandsdraad van

andere apparatuur of antenne met circuit indien

aanwezig (200 mA max.)

5 Bruin: Naar het mobiele-telefoonsysteem (Lees

voor meer informatie de instructies die bij de

mobiele telefoon worden geleverd.)

2 Gelb: an Autobatterie (konstant 12 V)

3 Rot: zur einer Zubehöranschlußklemme

4 Blau mit weißem Streifen: zum Zusatzkabel des

anderen Geräts oder der Motorantenne, sofern

vorhanden (max. 200 mA)

1 Noir: à la masse

2 Jaune: à la batterie de la voiture (12 V constant)

3 Rouge: à une borne accessoire

4 Bleu avec bande blanche:au fil de télécommande

de l’autre appareil ou à l’antenne automatique s’il

y en a une (200 mA max.)

5 Marron: à un système de téléphone cellulaire

(Pour les détails, se référer aux instructions du

téléphone cellulaire.)

5 Braun: an Mobiltelefon (Weitere informationen

entnehmen Sie bitte der Bedienungscanleitung

des Mobiltelefons.)

6 Andere: naar de speakers

2 Connect the aerial cord.

6 Andere: zur Lautsprecher

2 Sluit de antenne aan.

3 Finally connect the wiring harness to the unit.

6 Autres: aux enceintes

2 Das Antennenkabel anschließen.

3 Verbind de draadbundel daarna met het apparaat.

Note: If your vehicle does not have any accessory

terminal, move the fuse from the fuse position 1

(initial position) to fuse position 2, and connect the

red lead (A7) to the positive (+) battery terminal.

• The yellow lead (A4) is not used in this case.

2 Connectez le cordon d’antenne.

3 Die Kabelbäume am Gerät anschließen.

Opmerking: Als uw voertuig niet beschikt over een

3 Finalement, connectez le faisceau de fils à l’appareil.

Hinweis: Verfügt Ihr Fahrzeug nicht über eine

Zubehöranschlußklemme, die Sicherung von der 1.

Sicherungsposition (Erstposition) in die 2.

aansluitklem, moet u de zekering verplaatsen van stand 1

Remarque: Si votre véhicule ne possède pas de borne (beginstand) naar stand 2 en moet u de rode draad (A7)

accessoire, déplacez le fusible de la position de fusible met de pluspool (+) van de accu verbinden.

Sicherungsposition versetzen, die rote Leitung (A7) an 1 (position originale) à la position de fusible 2 et connectez • In dit geval wordt de gele draad (A4) niet gebruikt.

der (+) Batterieanschlußklemme anschließen. le fil rouge (A7) à la borne positive (+) de la batterie.

• Die gelbe Leitung (A4) wird in diesem Fall nicht verwendet. • Le fil jaune (A4) n’est pas utilisé dans ce cas.

To steering wheel remote controller—Only for KD-S73R/KD-S71R (see diagram

An Lenkradfernbedienung—Nur für KD-S73R/KD-S71R (siehe Schaltplan

Pour la télécommande de volant—Seulement pour le KD-S73R/KD-S71R (voir le diagramme

)

Naar stuurwiel-afstandsbediening—Alleen voor de KD-S73R/KD-S71R (zie schema

)

B1 B3 B5 B7

B2 B4 B6 B8

Fuse position 1

Rear ground terminal

Hintere

Fuse position 2

1. Sicherungsposition

Position de fusible 1

Zekering, stand 1

2. Sicherungsposition

Position de fusible 2

Zekering, stand 2

A5 A7

Erdungscanschlu-

B1 B3 B5 B7

A2 A4

ßklemme

Borne arrière de

B2 B4 B6 B8

A5 A7

masse

Massaklem aan de

achterkant

A2 A4

Ignition switch

Zündschalter

Interrupteur d’allumage

Ontstekingsschakelaar

Not included with this unit.

15 A fuse / 15 A Sicherung /

Wird nicht mit Gerät mitgeliefert.

Non fourni avec cet appareil.

Niet bij het apparaat inbegrepen.

Fusible 15 A / Zekering 15 A

Aerial terminal

Black

Schwarz

Noir

Line out

(see diagram

Antennenanschlußklemme

Borne de l’antenne

Aansluitpunt antenne

)

To metallic body or chassis of the car

Schutz kappen

Signalausgang

(siehe Schaltplan

Sortie de ligne

(voir le diagramme

Uitgang (zie schema

Zur metallenen Karosserie oder zum Fahrwerk des Autos

Vers corps métallique ou châssis de la voiture

Naar metalen ondergrond of chassis van de auto

Zwart

)

Yellow*¹

Gelb*¹

Jaune*¹

Geel*¹

)

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition swich)

Zur einer stromführenden Anschlußklemme im Sicherungsblock zum

Anschließen an die Autobatterie (Umgehen des Zündschalters)

A une borne sous tension du porte-fusible connectée à la batterie de

la voiture (en dérivant l’interrupteur d’allumage)

To aerial

Zur Antenne

A l’antenne

Naar de antenne

Naar een onder spanning staande aansluitklem in het zekeringblok die is

aangesloten op de accu van de auto (u passeert de ontstekingsschakelaar)

Fuse block

Sicherungsblock

Porte-fusible

Red

Rot

*1 : Before checking the operation of this unit prior to

To an accessory terminal in the fuse block

Zur einer Zubehöranschlußklemme im Sicherungsblock

Vers borne accessoire du porte-fusible

Rouge

Rood

installation, this lead must be connected, otherwise

power cannot be turned on.

*1 : Vor der Überprüfung der Funktionsfähigkeit des Geräts

vor dem Einbau, muß diese Leitung angeschlossen

werden, da sonst die Stromversorgung nicht

eingeschaltet werden kann.

*1 : Pour vérifier le fonctionnement de cet appareil avant

installation, ce fil doit être raccordé, sinon l’appareil ne

peut pas être mis sous tension.

*1 : Voordat u controleert of het apparaat werkt (alvorens het te

installeren), moet deze draad aangesloten zijn. Als dit niet het

geval is, kan de stroom niet worden ingeschakeld.

Zekeringblok

Naar een aansluitklem in het zekeringblok

Blue with white stripe

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

To remote lead of other equipment or power aerial if any

Zum Zusatzkabel des anderen Geräts oder der Motorantenne, sofern vorhanden

Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une

Naar afstandsdraad van andere apparatuur of antenne met circuit indien aanwezig

To cellular phone system

Zur Moblitelephon

À un système de téléphone

cellulaire

^A25

Brown / Braun / Marron / Bruin

Naar het mobiele-telefoonsysteem

Purple

Lila

Violet

Paars

White with black stripe

Weiß mit schwarzem

Streifen

Blanc avec bande noire

Wit met zwarte streep

White

Weiß

Blanc

Wit

Gray with black stripe

Grau mit schwarzem

Streifen

Gray

Grau

Gris

Green with black stripe

Grün mit schwarzem

Streifen

Vert avec bande noire

Groen met zwarte streep

Green

Grün

Vert

Purple with black stripe

Lila mit schwarzem

Streifen

Violet avec bande noire

Paars met zwarte streep

Gris avec bande noire

Grijs met zwarte streep

Grijs

Groen

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Right speaker (rear)

Linker Lautsprecher (vorne)

Enceinte gauche (avant)

Linkerspeaker (voorin)

Rechter Lautsprecher (vorne)

Enceinte droit (avant)

Rechterspeaker (voorin)

Linker Lautsprecher (hinten)

Enceinte gauche (arrière)

Linkerspeaker (achterin)

Rechter Lautsprecher (hinten)

Enceinte droit (arrière)

Rechterspeaker (achterin)

PRECAUTIONS on power supply and

speaker connections:

• DO NOT connect the speaker leads of the

power cord to the car battery; otherwise, the

unit will be seriously damaged.

• Connect the black lead (ground), yellow lead (to

car battery, constant 12 V), and red lead (to an

accessory terminal) correctly.

• BEFORE connecting the speaker leads of the

power cord to the speakers, check the speaker

wiring in your car.

– If the speaker wiring in your car is as

illustrated in Fig. 1 and Fig. 2 below, DO NOT

connect the unit using that original speaker

wiring. If you do, the unit will be seriously

damaged.

Redo the speaker wiring so that you can connect

the unit to the speakers as illustrated in Fig. 3.

– If the speaker wiring in your car is as

illustrated in Fig. 3, you can connect the unit

using the original speaker wiring in your car.

– If you are not sure of the speaker wiring of your

car, consult your car dealer.

VORSICHTSMASSREGELN beim

Anschließen der Stromversorgung und

Lautsprecher:

PRECAUTIONS sur l’alimentation et la

connexion des enceintes:

VOORZORGSMAATREGELEN bij het

verbinden van de stroomkabeldraad

met de speakers:

• NE CONNECTEZ PAS les fils d’enceintes du

cordon d’alimentation à la batterie; sinon,

l’appareil serait sérieusement endommagé.

• Connectez correctement le fil noir (a la masse), le fil

jaune (a la batterie de la voiture,12 V constant) et le

fil rouge (à la prise accessoire).

• Die Lautsprecherleitungen des Netzkabels

NICHT an der Autobatterie anschließen, da

sonst das Gerät schwer beschädigt wird.

• Die schwarze Leitung (Erdung), die gelbe Leitung

(zur Autobatterie, konstant 12 V) und die rote

Leitung (zur Zubehöranschlußklemme) richtig

anschließen.

• Verbind de speakerdraden van de stroomkabel

NIET met de accu van de auto; als u dit wel

doet, zal het apparaat ernstige schade

oplopen.

• Sluit de zwarte draad (aarde), de gele draad (naar de

accu van de auto, constant 12 V) en de rode draad

(naar de aansluitklem van de accessoire) op de juiste

wijze aan.

• VOORDAT u de speakerdraden van de stroomkabel

met de speakers verbindt, moet u de bedrading van de

speakers in uw auto controleren.

– Als de bedrading van de speakers eruitziet

zoals hieronder staat afgebeeld in Fig. 1 en

Fig. 2, mag het apparaat NIET worden aangesloten

met behulp van deze oorspronkelijke

speakerbedrading. Als u dat wel doet, zal het

apparaat ernstige schade oplopen.

Pas de bedrading van de speakers aan, zodat u het

apparaat met de speakers kunt verbinden, zoals staat

afgebeeld in Fig. 3.

– Als de bedrading van de speakers eruitziet

zoals staat afgebeeld in Fig. 3, kunt u het

apparaat aansluiten met behulp van de

oorspronkelijke speakerbedrading in uw auto.

– Als u twijfels hebt over de speakerbedrading in uw

auto, moet u contact opnemen met uw autodealer.

• AVANT de connecter les fils d’enceintes du cordon

d’alimentation aux enceintes, vérifiez le câblage

des enceintes de votre voiture.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 1 ou Fig. 2

ci-dessous, NE CONNECTEZ PAS l’appareil en

utiliscant ce câblage original des enceintes. Si

vous le faites, l’appareil sera sérieusement

endommagé.

Recommencez le câblage des enceintes de façon

que vous puissiez connecter l’appareil aux

enceintes comme montré sur la Fig. 3.

– Si le câblage des enceintes de votre voiture

est comme montré sur la Fig. 3, vous pouvez

connecter l’appareil en utiliscant ce câblage

original d’enceintes pour votre voiture.

• VOR dem Anschließen der Lautsprecherleitungen

des Spannunsgversorgungskabels an die

Lautsprecher, die Lautsprecherverdrahtung in

Ihrem Auto überprüfen.

– Ist die Lautsprecherverdrahtung wie unten in

„Fig. 1“ und „Fig. 2“ abgebildet, das Gerät

NICHT mit der Originalverdrahtung der

Lautsprecher anschließen, da sonst das Gerät

schwer beschädigt wird.

Die Lautsprecherverdrahtung erneuern, so daß

Sie das Gerät an den Lautsprechern wie in

„Fig. 3“ abgebildet anschließen können.

– Ist die Lautsprecherverdrahtung in Ihrem Auto

wie in „Fig. 3“ abgebildet, können Sie das Gerät

mit der Originalverdrahtung der Lautsprecher in

Ihrem Auto anschließen.

– Sind Sie sich über die Lautsprecherverdrahtung

in Ihrem Auto nicht sicher, wenden Sie sich an

Ihren Autohändler.

– Si vous n’êtes pas sûrs du câblage d’enceintes de

votre voiture, consulter le concessionnaire de

votre voiture.

Fig. 1

Fig. 2

Fig. 3

Connecting the leads / Anschließen der Leitungen / Raccordement des fils / Aansluiting van de gekleurde draden

Twist the core wires when connecting.

Die Kerndrähte beim Anschließen verdrehen.

Torsader les âmes des fils en les raccordant.

CAUTION / VORSICHT / PRECAUTION / LET OP!:

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

• Zur Vermeidung eines Kurzschlusses die Anschlußklemmen der NICHT VERWENDETEN Leitungen

Draai de kerndraden om elkaar heen wanneer u ze wilt aansluiten.

mit Isolierklebeband umwickeln.

• Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont PAS UTILISÉS avec de la bande

isolante.

• Om kortsluiting te voorkomen, moet u de aansluitklemmen van ONGEBRUIKTE gekleurde draden met

isolatieband bedekken.

Solder the core wires to connect them securely.

Die Kerndrähte anlöten, um sie fest anzuschließen.

Souder les âmes des fils pour les raccorder entre eux de façon sûre.

Soldeer de kerndraden zodat ze stevig vast zitten.

Connections Adding Other Equipment / Anschlüsse zum Hinzufügen von anderer Ausrüstung / Raccordement pour ajouter d’autres appareils /

Aansluitingen voor het toevoegen van andere apparatuur

Amplifier / Verstärker / Amplificateur / Versterker

You can connect an amplifier to upgrade your car

stereo system.

• Connect the remote lead (blue with white stripe) to • Schließen Sie das Fernbedienungskabel (blau mit

the remote lead of the other equipment so that it

can be controlled through this unit.

• Connect this unit’s line-out terminals to the

amplifier’s line-in terminals.

• Disconnect the speakers from this unit,

connect them to the amplifier. Leave the

speaker leads of this unit unused. (Cover the

terminals of these unused leads with insulating

tape, as illustrated above.)

Sie können einen Verstärker anschließen, um Ihre

Autostereoanlage zu erweitern.

Vous pouvez connecter un amplificateur pour

améliorer votre système autoradio.

• Connectez le fil de commande à distance (bleu

avec bande blanche) au fil de commande à

distance de l’autre appareil de façon qu’il puisse

être commandé via cet appareil.

• Raccorder les bornes de sortie ligne de cet appareil

aux bornes d’entrée ligne de l’amplificateur.

• Déconnectez les enceintes de cet appareil et

connectez-les à l’amplificateur. Laissez les fils

d’enceintes de cet appareil inutilisés. (Recouvrir

les extrémités de ces fils inutilisés avec de la

bande isolante comme montré ci-dessus.)

Het is mogelijk om uw autostereosysteem uit te breiden

met een versterker.

• Verbind de externe kabel (blauw met witte streep) met

de externe kabel van het andere apparatuur zodat deze

op afstand vanaf deze apparaat kan worden bediend.

• Verbind de uitgang van het apparaat met de ingang van

de versterker.

• Koppel de speakers van dit apparaat los en

verbind ze aan de versterker. Gebruik de

speakerdraden van dit apparaat niet. (Plak de

aansluitklemmen van deze speakerdraden met

isolatieband af zoals hierboven is afgebeeld.)

weißem Streifen) an das Fernbedienungskabel des

anderen Geräts an, so daß es über dieses Gerät

gesteuert werden kann.

• Die Anschlußklemmen am Ausgang dieses Gerät

an den Anschlußklemmen des Eingangs des

Verstärkers anschließen.

• Die Lautsprecher von diesem Gerät abtrennen

und am Verstärker anschließen. Die

Lautsprecherleitungen dieses Geräts unbenutzt

lassen. (Die Anschlußklemmen dieser nicht

verwendeten Leitungen mit Isolierklebeband

umwickeln, siehe Abbidung oben.)

Rear speakers

Hintere Lautsprecher

Enceintes arrière

Achterspeakers

Y-connector (not supplied with this unit)

Remote lead

Y-Anschluß (nicht mit diesem Gerät mitgeliefert)

Connecteur Y (non fourni avec cet appareil)

Y-connector (wordt niet bij dit apparaat geleverd)

Fernbedienungsleitung

Fil d’alimentation à distance

Afstandbedieningsdraad

JVC Amplifier

JVC Verstärker

INPUT

Blue with white stripe

Blau mit weißem Streifen

Bleu avec bande blanche

Blauw met witte streep

JVC Amplificateur

To power aerial if any

JVC Versterker

Zur Motorantenne, sofern vorhanden

Vers l’antenne automatique, s’il y en a une

Naar de antenne (indien aanwezig)

*2 : Firmly attach the ground wire to the metallic body or to the chasis of the car—to the place not coated

with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause

damage to the unit.

*2 : Verbinden Sie den Erdungsleiter mit der Karosserie oder dem Rahmen des Fahrzeugs. Die

Kntaktstelle darf nicht lackiert sein (sollte die Kontaktstelle lackiert sein, entfernen Sie den Lack der

Kontaktstelle, bevor Sie den Leiter befestigen). Wenn der Erdungsleiter nicht ordnungsgemäß

angeschlossen wird, kann dieses Gerät beschädigt werden.

LINE OUT

KD-S73R

KD-S71R

KD-S743R

KD-S741R

REAR

*2 : Attachez solidement le fil de mise à la masse au châssis métallique de la voiture—à un endroit qui

n’est pas recouvert de peinture (s’il est recouvert de peinture, enlevez d’abord la peinture avant

d’attacher le fil). L’appareil peut être endommagé si cela n’est pas fait correctement.

*2 : Bevestig de aardedraad goed met een metalen onderdeel of het chassis van de auto—bevestig op een niet-gelakt

gedeelte (indien gelakt, schuur dan af alvorens de draad te bevestigen). Het toestel kan worden beschadigd

indien de aardedraad niet goed is aangesloten.

Front speakers

Signal cord (not supplied with this unit)

Vordere Lautsprecher

Enceintes avant

Voorspeakers

Einzelleitung (nicht mit diesem Gerät mitgeliefert)

Cordon de signal (non fourni avec cet appareil)

Signaalkabel (wordt niet bij dit apparaat geleverd)

Connecting to the steering wheel remote controller / Anschluß an die Lenkradfernbedienung / Connexion de la télécommande de volant /

Verbinden met de stuurwiel-afstandsbediening

Only for KD-S73R/KD-S71R / Nur für KD-S73R/KD-S71R / Seulement pour le KD-S73R/KD-S71R / Alleen voor KD-S73R/KD-S71R

If your car is equipped with the steering wheel remote controller, you can operate this receiver using the controller.

To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC

IN-CAR ENTERTAINMENT dealer for details.

Wenn Ihr Fahrzeug mit einer Lenkradferndienung ausgestattet ist, können Sie damit diesen Receiver

steuern. Hierfür ist ein für Ihr Fahrzeug passender Radio-Lenkrad-Fernbedienungsadaption von JVC (nicht

im Lieferumfang enthalten) erforderlich. Für weitere Einzelheiten wenden Sie sich an Ihren JVC

Autoradiohändler.

Si votre voiture est munie d’une télécommande de volant, vous pouvez commander cet autoradio en utilisant

la télécommande. Pour le faire, un adaptateur pour télécommande au volant (non fourni) correspondant à

votre voiture est nécessaire. Consultez votre revendeur d’autoradio JVC pour les détails.

Indien uw auto een stuurwiel-afstandsbediening (niet bijgeleverd) heeft, kunt u deze receiver met die afstandsbediening

bedienen. Hiervoor heeft u echter een JVC adapter nodig die geschikt is voor de stuurwiel-afstandsbediening in uw auto.

Raadpleeg uw JVC car audio dealer voor details.

OE remote adapter (not supplied)

Radio-Lenkrad-Fernbedienungsadaption

(nicht im Lieferumfang enthalten)

Adaptateur pour télécommande au volant

(non fourni)

Adapter voor stuurwiel-afstandsbediening

(niet bijgeleverd)

Steering wheel remote input

Eingang für Lenkradfernbedienung

Entrée de la télécommande de volant

Ingang stuurwiel-afstandsbediening

Steering wheel remote controller (equipped in the car)

Lenkradfernbedienung (im Fahrzeug installiert)

Télécommande de volant (installée dans la voiture)

Stuurwiel-afstandsbediening (in de auto)

KD-S73R

KD-S71R

Nespresso Coffeemaker N90 User Manual
Motorola international 2700 User Manual
KitchenAid KCM534WH0 User Manual
Hamilton Beach Coffeemaker TE118 User Manual
Franke Consumer Products FF 5000 User Manual
FieldServer A Sierra Monitor Company FS 8700 123 User Manual
Ericsson LBI 38965B User Manual
Dell PowerVault MVT01 User Manual
Clarion compact disc User Manual
Black & Decker DCM100WC User Manual