Vizualogic HindsightTM User Manual

Backup Monitor System  
LCD Monitor &  
CCD Color Camera  
Backup Monitor System  
Copyright © 2003 TMI Products, Inc.  
All Rights Reserved  
Corona, CA U.S.A.  
Owners Manual  
060300  
1493 Bentley Drive • Corona, CA 92879 • 909-272-1996 • 800-624-7960 • Fax 909-272-1584  
Fall 2003  
99-8019-000 10/03  
Specifications  
Controls  
Specification  
Image Device  
Number of Pixels  
Scanning System  
Sync System  
WM-345 (NTSC)  
1/3˝ Interline CCD  
(H) 510 x 492  
WM-345C (Pal)  
Monitor Controls:  
1/3˝ Interline CCD  
(H) 500 x 582  
Sensor: Remote sensor for the  
remote control.  
525 Lines, 60 Field/Sec  
Internal Synchronization  
330 TV Line  
625 Lines, 50 Field/Sec  
Internal Synchronization  
330 TV Line  
Volume (-): Adjusts down with each  
function in the menu.  
Horizontal Resolution  
Video Output  
Mode: Switches through the  
functions in the menu to select  
the desired screen adjustments.  
1 Vp-p 75  
1 Vp-p 75 Ω  
B.L.C.  
Back Light  
Back Light  
Compensation (auto)  
Compensation (auto)  
Volume (+): Adjusts up with each  
function in the menu.  
White Balance  
Auto White Balance  
(auto)  
Auto White Balance  
(auto)  
Power: Turns the monitor on and off.  
Minimum Illumination 1 Lux (F: 2.0)  
1 Lux (F: 2.0)  
Remote Control:  
Electronic Shutter  
Built-In Lens  
1/60 ~ 1/100,000 Sec  
1/50 ~ 1/100,000 Sec  
F: 2.97 (option)  
Screen Power: Press the ‘POWER’ button to illuminate  
F: 2.97 (option)  
the LCD screen.  
Power Consumption  
Operation Temp.  
12 V 10% DC, 100 mA  
12 V 10% DC, 100 mA  
Control: Pressing the ‘CONTROL’ button will allow  
source selection by pressing the ‘AV’ button.  
-10°C ~ +50°C,  
RH 95% Max.  
-10°C ~ +50°C,  
RH 95% Max.  
Storage Temp.  
-20°C ~ +60°C,  
RH 95% Max.  
-20°C ~ +60°C,  
RH 95% Max.  
Monitor: Pressing the ‘MONITOR’ button allows the  
following adjustments to be selected.  
Weight  
Approx. 134 g  
Aluminum  
Approx. 134 g  
Aluminum  
Adjusting the screen options:  
Housing  
Screen Adjustments: Press the ‘PIC’ button to select the  
Accessories  
Angle Controller Ring – 3 sets Angle Controller Ring – 3 sets  
desired screen adjustment, then press the ‘VOL (-)’ or ‘VOL (+)’ to  
change the setting. Each press of the ‘PIC’ button will cycle to the next  
adjustment in the following order: Contrast, Brightness, Color, Tint, Blue  
Screen, Power Direct, Color System, Mirror Mode, Mode Selector.  
Fixing Ring – 3 pcs.  
Fixing Tube – 1 pc.  
Fixing Ring – 3 pcs.  
Fixing Tube – 1 pc.  
Contrast: Adjusts the differentiation between light and dark.  
Brightness: Adjust the overall Brightness of the LCD display.  
2
3
Controls (cont.)  
Setup Operation (cont.)  
Color: Adjusts the intensity of the display colors.  
Press PIC button on the remote control (or Mode button on the  
Monitor). It will appear on the screen in order as the following pictures.  
Tint: Adjusts the overall red/green color balance.  
Blue Screen: Select ‘OFF’ to see the video program while adjusting the  
display. Select ‘ON’ to see a blue screen while making display adjustments.  
CONTRAST  
BRIGHT  
COLOR  
TINT  
Setup Operation  
Blue Screen: OFF  
Power Direct: Off  
Color System: NTSC  
Mirror Mode: Normal  
This system is designed to allow the backup system to only operate  
when the vehicle is in reverse.  
Adjust each function, CONTRAST, BRIGHTNESS, COLOR, TINT, ON/OFF,  
NTSC/PAL, NORMAL, MODE SELECTOR with VOL (+ -) button.  
1. Set up directions:  
a. Engage the Emergency Brake  
System Operation  
1. Turn the system on using the ‘Power ON’ switch on the monitor.  
b. Turn the ignition on only. Do not start the vehicle.  
c. Put the vehicle in reverse.  
2. Switch the monitor to A/V (1).  
d. Push power on the monitor to turn it on.  
e. Push the ‘MODE’ button on the screen to access the functions.  
2. No picture will be displayed while driving.  
2. Once the vehicle is put in reverse, the screen will switch over to A/V  
(2) to display the camera view. Once the screen is put into drive, the  
screen will revert to A/V (1).  
f. Continue pushing the ‘MODE’ button until you get to  
‘POWER DIRECT: OFF’.  
g. Push ‘VOLUME (+)’ to select ‘ON’.  
3. Switch the monitor to A/V (2).  
h. This will allow the monitor to turn ‘ON’ every time the Vehicle  
is put in reverse.  
2. The monitor will display the camera view. (Driving forward, or  
backing up)  
i. The setup is now finished.  
See wire diagram for installation directions.  
4
5
Troubleshooting  
Care and Maintenance  
• No Display: (Screen is black)  
Your backup monitor system is a product of superior design and crafts-  
manship and should be treated with care. The suggestions below will  
help to fulfill warranty obligations and to provide many years  
of enjoyment.  
- Verify that +12V power is correctly supplied to the  
A/V Control Module.  
- Verify that the Monitor Cable is connected to the  
A/V Control Module.  
Cleaning the Monitor Screen and Housing:  
• The components may be cleaned by gentle wiping with a soft,  
lint-free, cotton cloth that has been slightly dampened with water.  
- Verify that the + 12V circuit is on (i.e. ignition position).  
- Verify that the Setup Operations steps were taken. (Page 4)  
CAUTION: Do not use liquids, abrasives, aerosol cleaners, or  
paper cleaning products because they will result in permanent  
damage to the finish of your components! The LCD screen is made  
of a specially coated glass and can be scratched or damaged by  
abrasive or ammonia-based window cleaners.  
• No video: (screen displays blue screen)  
- Make sure that all cables are connected properly.  
- Make sure that the Camera Cable is connected to the  
A/V Control Module.  
• Use and Storage:  
- These units contain precision electronics that must be  
protected from dust, dirt, and moisture.  
- Make sure the the Monitor power switch is toggled On.  
- Never spill liquids on any of the components. Liquids,  
humidity, and precipitation contain minerals that will  
corrode electronic circuits.  
• Take care to avoid the following:  
- Rough handling can break internal circuit boards. Do not  
drop, knock, or shake the components.  
- Do not attempt to paint or refinish the components. Paint can  
clog moving parts and prevent proper operation.  
- The components can be damaged by non-expert handling.  
Attempting to open any of the components may void the  
Limited Warranty.  
6
7
Limited Warranty  
How to Obtain Warranty Service  
ONE YEAR LIMITED WARRANTY  
NONTRANSFERABLE  
To obtain warranty service, the product(s) must be returned to an  
authorized installer accompanied by proof of warranty coverage.  
Terms of Warranty  
TMI Products, Inc (the Company) warrants to the original retail purchaser, that the auto video product(s)  
purchased from a Company authorized installer are free from defects in materials or workmanship under  
normal use and conditions for a period of one (1) year from date of purchase, except, the remote control  
and headphones which are warranted for a period of sixty (60) days from date of purchase. A sales  
receipt is required to provide proof of date of purchase.  
How State Law Relates to the Warranty  
Should the product(s) be determined defective during the applicable warranty period, the defect(s) will  
be repaired or replaced with a new or reconditioned part(s), at the Company’s option. To obtain warranty  
service, the product(s) must be returned to a Company authorized installer along with proof of  
warranty coverage.  
Some states do not allow limitation on how long an implied warranty  
lasts. In such states, the limitations or exclusions of this Limited  
Warranty may not apply. Some states do not allow the exclusion or  
limitation of incidental or consequential damages. In such states, the  
exclusion or limitation of this Limited Warranty may not apply to you.  
This Limited Warranty gives you specific legal rights and you may  
have other rights which vary from state to state.  
Exclusions:  
This limited warranty excludes:  
• Elimination of externally generated static or noise, or the correction of antenna problems or weak  
television reception.  
• Costs incurred for installation, removal or reinstallation of the product(s).  
• Damage to tapes, video games, software, camcorders, discs, speakers, accessories or vehicle  
electrical systems.  
• Cosmetic damage or damage due to negligence, misuse, abuse, failure to follow operation instructions,  
accidental spills or customer applied cleaners.  
• Damage due to environmental causes such as floods, airborne fallout, chemicals, salt, hail, windstorms,  
lightning or extreme temperatures.  
• Damage due to accidents, road hazards, fire, theft or vandalism.  
• Damage due to improper installation or connection, improper connection to equipment of another manu-  
facturer, modifications of existing equipment, use of a faulty tape cartridge or cleaning of the VCR head.  
• Product(s) which have been opened or tampered with for any reason or which have been damaged due  
to alteration or service performed by anyone other than the Company or a Company authorized installer.  
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, THE COMPANY MAKES NO OTHER WARRANTIES,  
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE. THE COMPANY EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN  
THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO  
THE TERMS OF THIS EXPRESSED LIMITED WARRANTY.  
Some states do not allow limitation on how long an implied warranty lasts. In such states, the limitations  
or exclusions of this Limited Warranty may not apply.  
Some states do not allow the exclusion or limitation of incidental or consequential damages. In such  
states, the exclusion or limitation of this Limited Warranty may not apply to you. This Limited Warranty  
gives you specific legal rights and you may have other rights, which vary from state to state.  
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, THE COMPANY MAKES NO OTHER WARRANTIES,  
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE. THE COMPANY EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN  
THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO  
THE TERMS OF THIS EXPRESSED LIMITED WARRANTY.  
8
9

Xtant A2002 User Manual
Vista Davis & Sanford VOYAGERNH User Manual
Toshiba TEC MA 227 User Manual
Tascam MX 2424 User Manual
Sony XR 3208MK2 User Manual
Sony Walkman WM EX521 User Manual
Sony LCS PC User Manual
Sony DCR SR85 User Manual
Sony CDX GT210 User Manual
Rosen Entertainment Systems UN7000 User Manual