Transcend Information SDHC6 User Manual

HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Description  
Features  
Transcend HD Video Card is rated SDHC Class 6  
to provide extremely fast data transfer speeds  
(guaranteed minimum write speed of 6MB/s) and  
assure quick reaction time when used in digital  
cameras and camcorders. This card is optimized for  
Full HD 1080p video recording, which allows users to  
capture every moment in breathtaking detail!  
Transcend HD Video Cards also feature a useful  
space for labeling and organizing recorded video  
content.  
RoHS compliant product.  
Card Lid material: PC (comply with UL94,Flame  
Class:HB)  
Operating Voltage: 2.7 ~ 3.6V  
Operating Temperature: -25 ~ 85°C  
Durability: 10,000 insertion/removal cycles  
Compatible with SD Specification Ver. 2.0  
Comply with SD File System Specification Ver. 2.0  
Mechanical Write Protection Switch  
Supports Speed Class Specification up to Class 6  
Supports Copy Protection for Recorded Media (CPRM)  
for SD-Audio  
Placement  
Seamless compatibility with SDMI-compliant digital audio  
devices  
Form Factor: 24mm x 32mm x 2.1mm  
Front  
Back  
Pin Definition  
SD Mode  
Description  
SPI Mode  
Pin No.  
Name Type  
Name Type  
Description  
Chip Select (neg true)  
Data In  
I/O/PP3  
CS  
DI  
I
1
2
3
4
5
6
7
8
9
CD/DAT  
CMD  
VSS1  
Card Detect/Data Line [Bit3]  
Command/Response  
Supply voltage ground  
Supply voltage  
PP  
S
S
I
I
Supply voltage ground  
Supply voltage  
Clock  
VSS  
VDD  
SCLK  
VSS2  
DO  
S
VDD  
S
CLK  
Clock  
I
S
VSS2  
S
Supply voltage ground  
Supply voltage ground  
Data Out  
DAT0 I/O/PP Data Line [Bit0]  
DAT1 I/O/PP Data Line [Bit1]  
O/PP  
RSV  
RSV  
I/O/PPData Line [Bit2]  
DAT2  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Bus Operating Conditions  
General  
Parameter  
Peak voltage on all lines  
All Inputs  
Symbol  
Min.  
-0.3  
Max.  
Unit  
V
Remark  
VDD+0.3  
Input Leakage Current  
All Outputs  
-10  
-10  
10  
10  
µA  
µA  
Output Leakage Current  
Power Supply Voltage  
Parameter  
Supply voltage  
Symbol  
VDD  
Min.  
2.7  
Max.  
3.6  
Unit  
V
Remark  
Output High Voltage  
Output Low Voltage  
Input High Voltage  
Input Low Voltage  
Power up time  
VOH  
0.75* VDD  
V
IOH=-100uA@VDD Min.  
IOL=100uA@VDD Min.  
VOL  
0.125* VDD  
V
VIH  
0.625* VDD VDD+0.3  
VSS-0.3 0.25* VDD  
250  
V
VIL  
V
ms  
From 0v to VDD Min.  
Current Consumption  
The current consumption is measured by averaging over 1 second.  
Before first command: Maximum 15 mA  
During initialization: Maximum 100 mA  
Operation in Default Mode: Maximum 100 mA  
Operation in High Speed Mode: Maximum 200 mA  
Operation with other functions: Maximum 500 mA.  
Bus Signal Line Load  
The total capacitance CL the CLK line of the SD Memory Card bus is the sum of the bus master capacitance CHOST, the bus  
capacitance CBUS itself and the capacitance CCARD of each card connected to this line:  
CL = CHOST + CBUS + Ν*CCARD  
Where N is the number of connected cards.  
Parameter  
Pull-up resistance  
Symbol  
RCMD  
RDAT  
Min.  
10  
Max.  
100  
Unit  
Remark  
kΩ  
To prevent bus floating  
Bus signal line capacitance  
CL  
40  
pF  
1 card  
C
HOST+CBUS shall not exceed  
30 pF  
3
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Single card capacitance  
CCARD  
RDAT3  
10  
16  
90  
pF  
Maximum signal line inductance  
Pull-up resistance inside card (pin1)  
nH  
fPP 20 MHz  
10  
kΩ  
May be used for card  
detection  
Note that the total capacitance of CMD and DAT lines will be consist of CHOST, CBUS and one CCARD only because they are  
connected separately to the SD Memory Card host.  
Host should consider total bus capacitance for each signal as the sum of CHOST, CBUS, and CCARD, these parameters are  
defined by per signal. The host can determine CHOST and CBUS so that total bus capacitance is less than the card estimated  
capacitance load (CL=40 pF). The SD Memory Card guarantees its bus timing when total bus capacitance is less than  
maximum value of CL (40 pF).  
4
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Bus Signal Levels  
As the bus can be supplied with a variable supply voltage, all signal levels are related to the supply voltage.  
To meet the requirements of the JEDEC specification JESD8-1A and JESD8-7, the card input and output voltages shall be  
within the following specified ranges for any VDD of the allowed voltage range:  
Parameter  
Output HIGH voltage  
Output LOW voltage  
Input HIGH voltage  
Input LOW voltage  
Symbol  
VOH  
Min.  
Max.  
Unit  
V
Remark  
0.75* VDD  
IOH = -100 μA @VDD min  
IOL = -100 μA @VDD min  
VOL  
0.125* VDD  
VDD + 0.3  
0.25* VDD  
V
VIH  
0.625* VDD  
V
VIL  
VSS – 0.3  
V
5
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Bus Timing  
Parameter  
Symbol  
Min  
Max.  
Unit  
Remark  
Clock CLK (All values are referred to min (VIH) and max (VIL)  
Clock frequency Data Transfer Mode  
Clock frequency Identification Mode  
Clock low time  
fPP  
fOD  
tWL  
tWH  
tTLH  
tTHL  
0
0(1)/100  
10  
25  
MHz CCARD 10 pF, (1 card)  
400  
KHz CCARD 10 pF, (1 card)  
ns  
ns  
ns  
ns  
CCARD 10 pF, (1 card)  
CCARD 10 pF, (1 card)  
CCARD 10 pF, (1 card)  
CCARD 10 pF, (1 card)  
Clock high time  
10  
Clock rise time  
10  
10  
Clock fall time  
Inputs CMD, DAT (referenced to CLK)  
Input set-up time  
tISU  
tIH  
5
5
ns  
ns  
CCARD 10 pF, (1 card)  
Input hold time  
CCARD 10 pF, (1 card)  
Outputs CMD, DAT (referenced to CLK)  
6
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Output Delay time during Data Transfer Mode  
Output Delay time during Identification Mode  
tODLY  
tODLY  
0
0
14  
50  
ns  
ns  
CL 40 pF, (1 card)  
CL 40 pF, (1 card)  
(1) 0 Hz means to stop the clock. The given minimum frequency range is for cases were continues clock is required  
7
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Bus Timing (High Speed Mode)  
Parameter  
Symbol  
Min  
Max.  
50  
Unit  
Remark  
Clock CLK (All values are referred to min (VIH) and max (VIL)  
Clock frequency Data Transfer Mode  
Clock low time  
fPP  
0
7
MHz CCARD 10 pF, (1 card)  
tWL  
ns  
CCARD 10 pF, (1 card)  
Clock high time  
tWH  
tTLH  
tTHL  
7
ns  
ns  
ns  
CCARD 10 pF, (1 card)  
CCARD 10 pF, (1 card)  
CCARD 10 pF, (1 card)  
Clock rise time  
3
3
Clock fall time  
Inputs CMD, DAT (referenced to CLK)  
Input set-up time  
tISU  
tIH  
6
2
ns  
ns  
CCARD 10 pF, (1 card)  
Input hold time  
CCARD 10 pF, (1 card)  
Outputs CMD, DAT (referenced to CLK)  
8
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Output Delay time during Data Transfer Mode  
Output Hold time  
Total System capacitance for each line1  
tODLY  
tOH  
14  
40  
ns  
ns  
pF  
CL 40 pF, (1 card)  
CL 40 pF, (1 card)  
(1 card)  
2.5  
CL  
1) In order to satisfy severe timing, host shall drive only one card.  
9
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Reliability and Durability  
Temperature  
Operation: -25°C / 85°C (Target spec), Storage: -40°C / 85°C  
Moisture and corrosion  
Operation: 25°C / 95% rel. humidity  
Storage: 40°C / 93% rel. hum./500h  
Salt Water Spray: 3% NaCl/35C; 24h acc. MIL STD Method 1009  
10.000 mating cycles; test procedure: tbd.  
Durability  
Bending  
10N  
Torque  
0.15N.m or +/-2.5 deg  
Drop test  
1.5m free fall  
UV light exposure  
X-ray exposure  
UV: 254nm, 15Ws/cm² according to ISO 7816-1  
0.1 Gy of medium-energy radiation (70 keV to 140 keV, cumulative dose per year)  
to both sides of the card, according to ISO7816-1.  
No warp page; no mold skin; complete form; no cavities surface smoothness <=  
-0.1 mm/cm² within contour; no cracks; no pollution (fat, oil dust, etc.)  
Visual inspection  
Shape and form  
Minimum moving force of WP witch 40gf (Ensures that the WP switch will not slide while it is inserted to the connector.)  
WP Switch cycles  
minimum 1000 Cycles(@Slide force 0.4N to 5N)  
10  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Register Information  
Within the card interface six registers are defined: OCR, CID, CSD, RCA, DSR and SCR. These can be accessed only  
by corresponding commands (see Chapter 4.7). The OCR, CID, CSD and SCR registers carry the card/content specific  
information, while the RCA and DSR registers are configuration registers storing actual configuration parameters.  
1. OCR register  
The 32-bit operation conditions register stores the VDD voltage profile of the card. Additionally, this register  
includes status information bits. One status bit is set if the card power up procedure has been finished. This register  
includes another status bit indicating the card capacity status after set power up status bit. The OCR register shall be  
implemented by the cards. The 32-bit operation conditions register stores the VDD voltage profile of the card. Bit 7 of  
OCR is newly defined for Dual Voltage Card and set to 0 in default. If a Dual Voltage Card does not receive CMD8, OCR  
bit 7 in the response indicates 0, and the Dual Voltage Card which received CMD8, sets this bit to 1.  
Additionally, this register includes 2 more status information bits. Bit 31 - Card power up status bit, this status bit is  
set if the card power up procedure has been finished. Bit 30 - Card capacity status bit, this status bit is set to 1 if card is  
High Capacity SD Memory Card. 0 indicates that the card is Standard Capacity SD Memory Card. The Card Capacity  
status bit is valid after the card power up procedure is completed and the card power up status bit is set to 1. The Host  
shall read this status bit to identify a Standard or High Capacity SD Memory Card.  
The OCR register shall be implemented by the cards.  
OCR Register Definition  
11  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
1) This bit is valid only when the card power up status bit is set.  
2) This bit is set to LOW if the card has not finished the power up routine.  
The supported voltage range is coded as shown in Table 5-1. A voltage range is not supported if the  
corresponding bit value is set to LOW. As long as the card is busy, the corresponding bit (31) is set to  
LOW.  
2. CID Register  
The Card IDentification (CID) register is 128 bits wide. It contains the card identification information used during the card  
identification phase. Every individual flash card shall have a unique identification number. The structure of the CID  
register is defined in the following paragraphs:  
MID  
An 8-bit binary number that identifies the card manufacturer. The MID number is controlled, defined,  
and allocated to a SD Memory Card manufacturer by the SD-3C, LLC. This procedure is established to  
ensure uniqueness of the CID register.  
OID  
A 2-character ASCII string that identifies the card OEM and/or the card contents (when used as a  
distribution media either on ROM or FLASH cards). The OID number is controlled, defined, and allocated  
to a SD Memory Card manufacturer by the SD-3C, LLC. This procedure is established to ensure  
uniqueness of the CID register.  
Note: SD-3C, LLC licenses companies that wish to manufacture and/or sell SD Memory Cards, including but not limited to flash memory,  
ROM, OTP, RAM, and SDIO Combo Cards.  
SD-3C, LLC is a limited liability company established by Matsushita Electric Industrial Co. Ltd., SanDisk Corporation and Toshiba  
Corporation.  
PNM  
The product name is a string, 5 ASCII characters long.  
PRV  
12  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
The product revision is composed of two Binary Coded Decimal (BCD) digits, four bits each, representing an “n.m”  
revision number. The “n” is the most significant nibble and “m” is the least significant nibble.  
As an example, the PRV binary value field for product revision “6.2” will be: 0110 0010  
PSN  
The Serial Number is 32 bits of binary number.  
MDT  
The manufacturing date composed of two hexadecimal digits, one is 8 bit representing the year(y)  
and the other is four bits representing the month(m).  
The “m” field [11:8] is the month code. 1 = January.  
The “y” field [19:12] is the year code. 0 = 2000.  
As an example, the binary value of the Date field for production date “April 2001” will be:  
00000001 0100.  
CRC  
CRC7 checksum (7 bits).  
3. CSD Register  
Table 5-16 shows Definition of the CSD for the High Capacity SD Memory Card (CSD Version 2.0). The following  
sections describe the CSD fields and the relevant data types for the High Capacity SD Memory Card.  
CSD Version 2.0 is applied to only the High Capacity SD Memory Card. The field name in parenthesis is set to fixed  
value and indicates that the host is not necessary to refer these fields. The fixed values enables host, which refers to  
these fields, to keep compatibility to CSD Version 1.0. The Cell Type field is coded as follows: R = readable, W(1) =  
writable once, W = multiple writable.  
13  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
The CSD Register Fields (CSD Version 2.0)  
The following sections describe the CSD fields and the relevant data types. If not explicitly defined otherwise, all bit  
strings are interpreted as binary coded numbers starting with the left bit first.  
CSD_STRUCTURE  
Field structures of the CSD register are different depend on the Physical Specification Version and Card  
Capacity.  
The CSD_STRUCTURE field in the CSD register indicates its structure version.  
The following table shows the version number of the related CSD structure.  
14  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
CSD Register Structure  
TAAC  
This field is fixed to 0Eh, which indicates 1 ms. The host should not use TAAC, NSAC, and R2W_FACTOR to calculate  
timeout and should uses fixed timeout values for read and write operations (See 4.6.2).  
NSAC  
This field is fixed to 00h. NSAC should not be used to calculate time-out values.  
TRAN_SPEED  
The following table defines the maximum data transfer rate per one data line - TRAN_SPEED:  
15  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Note that for current SD Memory Cards that field must be always 0_0110_010b (032h) which is equal to 25MHz - the  
mandatory maximum operating frequency of SD Memory Card.  
In High-Speed mode, that field must be always 0_1011_010b (05Ah) which is equal to 50MHz. And when the timing  
mode returns to the default by CMD6 or CMD0 command, its value will be 032h.  
CCC  
The SD Memory Card command set is divided into subsets (command classes). The card command class register CCC  
defines which command classes are supported by this card. A value of ‘1’ in a CCC bit means that the corresponding  
command class is supported.  
READ_BL_LEN  
This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte.  
READ_BL_PARTIAL  
This field is fixed to 0, which indicates partial block read is inhibited and only unit of block access is allowed.  
WRITE_BLK_MISALIGN  
This field is fixed to 0, which indicates write access crossing physical block boundaries is always disabled in High  
Capacity SD Memory Card.  
READ_BLK_MISALIGN  
This field is fixed to 0, which indicates read access crossing physical block boundaries is always  
disabled in High Capacity SD Memory Card.  
DSR_IMP  
Defines if the configurable driver stage is integrated on the card. If set, a driver stage register (DSR)must be  
implemented also.  
16  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
C_SIZE  
This field is expanded to 22 bits and can indicate up to 2 TBytes (It is the same as the maximum memory space specified  
by a 32-bit block address.)  
This parameter is used to calculate the user data area capacity in the SD memory card (not include the protected area).  
The user data area capacity is calculated from C_SIZE as follows: memory capacity = (C_SIZE+1) * 512K byte  
As the maximum capacity of the Physical Layer Specification Version 2.00 is 32 GB, the upper 6 bits of this field shall be  
set to 0.  
ERASE_BLK_EN  
This field is fixed to 1, which means the host can erase one or multiple units of 512 bytes.  
SECTOR_SIZE  
This field is fixed to 7Fh, which indicates 64 KBytes. This value does not relate to erase operation. Version 2.00 cards  
indicates memory boundary by AU size and this field should not be used.  
WP_GRP_SIZE  
This field is fixed to 00h. The High Capacity SD Memory Card does not support write protected groups.  
WP_GRP_ENABLE  
This field is fixed to 0. The High Capacity SD Memory Card does not support write protected groups.  
R2W_FACTOR  
This field is fixed to 2h, which indicates 4 multiples. Write timeout can be calculated by multiplying the read access time  
and R2W_FACTOR. However, the host should not use this factor and should use 250 ms for write timeout  
WRITE_BL_LEN  
This field is fixed to 9h, which indicates WRITE_BL_LEN=512 Byte.  
WRITE_BL_PARTIAL  
This field is fixed to 0, which indicates partial block read is inhibited and only unit of block access is allowed.  
FILE_FORMAT_GRP  
This field is set to 0. Host should not use this field.  
17  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
COPY  
Defines if the contents is original (= ‘0’) or has been copied (=’1’). The COPY bit for OTP and MTPdevices, sold to end  
consumers, is set to ‘1’ which identifies the card contents as a copy. The COPY bit is an one time programmable bit.  
PERM_WRITE_PROTECT  
Permanently protects the whole card content against overwriting or erasing (all write and erase commands for this card  
are permanently disabled). The default value is ‘0’, i.e. not permanently write protected.  
TMP_WRITE_PROTECT  
Temporarily protects the whole card content from being overwritten or erased (all write and erase commands for this  
card are temporarily disabled). This bit can be set and reset. The default value is ‘0’, i.e. not write protected.  
FILE_FORMAT  
This field is set to 0. Host should not use this field.  
CRC  
The CRC field carries the check sum for the CSD contents.  
The checksum has to be recalculated by the host for any CSD modification. The default corresponds to the initial CSD  
contents.  
The following table lists the correspondence between the CSD entries and the command classes. A ‘+’ entry indicates  
that the CSD field affects the commands of the related command class.  
18  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
4. RCA Register  
The writable 16-bit relative card address register carries the card address that is published by the card during the card  
identification. This address is used for the addressed host-card communication after the card identification procedure.  
The default value of the RCA register is 0x0000. The value0x0000 is reserved to set all cards into the Stand-by State  
with CMD7.  
5. DSR Register (Optional)  
The 16-bit driver stage register is described in detail in Chapter 6.5. It can be optionally used to improve the bus  
performance for extended operating conditions (depending on parameters like bus length, transfer rate or number of  
cards). The CSD register carries the information about the DSR register usage. The default value of the DSR register is  
19  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
0x404.  
6. SCR Register  
In addition to the CSD register there is another configuration register that named - SD CARD Configuration Register  
(SCR). SCR provides information on SD Memory Card's special features that were configured into the given card. The  
size of SCR register is 64 bit. This register shall be set in the factory by the SD Memory Card manufacturer.  
The following table describes the SCR register content.  
SCR_STRUCTURE  
Version number of the related SCR structure in the SD Memory Card Physical Layer Specification.  
SCR Register Structure Version  
SD_SPEC  
Describes the SD Memory Card Physical Layer Specification version supported by this card.  
SD_SPEC  
Physical Layer Specification Version Number  
0
Version 1.0-1.01  
Version 1.10  
1
2
Version 2.00  
3-15  
reserved  
Physical Layer Specification Version  
DATA_STAT_AFTER_ERASE  
20  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Defines the data status after erase, whether it is ‘0’ or ‘1’ (the status is card vendor dependent).  
SD_SECURITY  
Describes the security algorithm supported by the card.  
SD Supported Security Algorithm  
Note that it is mandatory for a regular writable SD Memory Card to support Security Protocol. For ROM (Read Only) and  
OTP (One Time Programmable) types of the SD Memory Card, the security feature is optional. In the case of Standard  
Capacity SD Memory Card, this field shall be set to 2 (Version 1.01). In the case of High Capacity SD Memory Card, this  
field shall be set to 3 (Version 2.00).  
SD_BUS_WIDTHS  
Describes all the DAT bus widths that are supported by this card.  
Since SD Memory Card shall support at least the two bus modes 1bit or 4bit width then any SD Card shall set at least  
bits 0 and 2 (SD_BUS_WIDTH="0101").  
21  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
Mechanical Dimension  
22  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
23  
Transcend Information Inc.  
HD Video Card Series  
4GB~16GB SDHC6 HD Video Card  
24  
Transcend Information Inc.  

Tailgator The Original Portable Gas Powered Blender User Manual
Sony HDW 730S User Manual
Sony Handycam HDR CX115E User Manual
Sony Handycam DCR TRV950E User Manual
Sony DVW 700WS User Manual
Sony Camcorder HDC 910 User Manual
Snapper P216518B User Manual
Samsung VP D975W(i) User Manual
Samsung SC MX20H User Manual
Russell Hobbs PHILISHAVE HQ 282 User Manual