Toshiba Car Video System P1910A User Manual

Leading Innovation  
USER'S MANUAL  
Color LCD Monitor  
Owner’s Record  
The model number and serial number are on the  
back of your monitor. Record these numbers in the  
spaces below Refer to these numbers whenever you  
communicate with your Toshiba dealer about this  
monitor.  
P 1 7 1 0 A  
Model Number:  
Serial Number:  
P 1 9 1 0 A  
TOSHIBA CORPORATION  
Part Number:  
V.2.0  
Important Information  
For information on our latest products and peripheral devices, refer to the following Website:  
If the URL changes, refer to the Toshiba website (http://www.toshiba.com/).  
WARNING:  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO  
RAIN OR MOISTURE.  
Table of Contents  
Important Information  
Dear Customer,  
2
3
Important Safeguards  
Disclaimer  
3
WARNING  
RISK OF ELECTRIC  
6
SHOCK DO NOT OPEN  
Usage Limitation  
6
WARNING: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
Notes on Use and Installation  
Monitor Installation  
1.Desktop intstallation  
6
7
7
2.Wall Mount Installation  
7
3.Rack mount installation  
8
AC Adapter  
9
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert  
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure  
that may be of sufficient magnitude to constitute a risk of electric shock to persons.  
LCD panel  
10  
10  
10  
11  
12  
12  
13  
13  
13  
13  
14  
16  
19  
Components  
External View and Physical Description  
Input and Output connectors  
Setup for Monitor  
The exclamation point within an equilateral triangle is intended to alert the user to the presence  
of important operating and maintenance (servicing) instructions in the literature accompanying  
the appliance.  
1.Front control panel  
2.Selection of input signal  
3. Adjustment of contrast and Brightness  
4.Lock a switch and unlock  
5.Menu function  
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK:  
DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
6.VGA / DVI Menu and definition of functions  
7.Composite Video OSD Menu and definition of functions  
P1710A / P1910A Specification  
FIELD INSTALLATION MARKING:  
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM  
TO ALL LOCAL CODES.  
LIMITED WARRANTY  
1
2
4. Follow Instructions  
USA - FCC Statement  
Follow all operating and use instructions.  
FCC Declaration of Conformity Statement  
Product name: Color LCD Monitor  
5. Cleaning  
Disconnect this monitor from the power supply before cleaning.  
Model number: P1710A P1910A  
6. Attachments  
The Toshiba Color LCD Monitor complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
The party responsible for compliance to these rules is:  
Do not use attachments not recommended by the monitor manufacturer as they may pose safety risks.  
7. Water and Moisture  
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.  
9740 IRVINE BLVD., IRVINE, CA 92618-1697  
Do not use this monitor near water. Some examples are: near a bath tub, wash bowl, kitchen sink, or laundry  
tub, in a wet basement, or near a swimming pool.  
TEL: (949) 583-3000  
8. Accessories  
NOTE:  
Do not place this monitor on an unstable cart, stand, tripod, bracket or table. The monitor may fall, causing  
serious injury to a person, or serious damage to the product. Use only with stand, tripod, bracket, or table  
recommended by the manufacturer, or sold with the monitor. Any mounting of the product should follow the  
manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
9. Ventilation  
This monitor should never be placed near or over a radiator or heat register. If this product is placed in a  
built in installation verify that there is proper ventilation so that the monitor temperature operates within the  
recommended temperature range.  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
10. Power Sources  
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
This monitor should be operated only from the type of power source indicated on the information label. If you  
are not sure of the type of power supply at your location, consult your product dealer.  
11. Power-Cord Protection  
CAUTION:  
Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or  
against them. Pay particular attention to cords at plugs, screws and the point where they exit the product.  
Changes or modifications to this equipment not expressly approved by Toshiba America Information Systems,  
Inc. could void the user’s authority to operate this equipment.  
12. Installation  
Install this monitor on a secure part of the ceiling or wall. If installed on an unsecured location, the monitor  
could fall causing injury and damage.  
Dear Customer,  
Thank you for purchasing the Color LCD Monitor. Before using the monitor, read this User's Manual carefully to  
ensure correct usage. Once you have finished reading this User's Manual, keep it in a convenient place for future  
reference.  
13. Lightning  
For additional protection on this monitor during a lightning storm, or when it is left unattended and unused for  
long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This  
will prevent damage to the monitor due to lightning and powerline surges. If lightning occurs, do not touch the  
unit or any connected cables in order to avoid electric shock.  
The design, specifications, software, and User's Manual contents are subject to change without prior notice.  
14. Overloading  
Do not overload the power supply or extension cords as this can result in a risk of fire or electric shock.  
Important Safeguards  
15. Object and Liquid Entry  
1. Read Instructions  
Never push objects of any kind into this monitor through openings as they may touch dangerous electrical  
points or short-out parts that could result in a fire or electrical shock. Never intentionally spill liquid of any kind  
on the monitor.  
Read all the safety and operating instructions before operating the product.  
2. Retain Instructions  
Retain the safety instructions and user's manual for future reference.  
16. Heat  
Keep the product away from direct sunlight, fire or a heat source such as a heater, radiators, or other  
products (including amplifiers) that produce heat. This may reduce the product lifetime or result in fire.  
3. Warnings  
Comply with all warnings on the product and in the user's manual.  
3
4
17. Connecting  
When you connect this product to other equipment, turn off the power and unplug all of the equipment from  
Disclaimer  
the wall outlet. Failure to do so could cause damage to this product. Read the owner’s manual of the other  
equipment carefully and follow the instructions when making any connections.  
We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in any  
of the following cases:  
18. LCD panel  
1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or  
accidental; use under extreme operating conditions.  
Do not press on or jolt the LCD panel. Doing so may cause the LCD panel glass to break and injury may  
occur. Should the LCD panel be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause  
poisoning. If you have got it into your mouth, wash it out and consult your doctor. If your hands or clothes  
have touched it, wipe them with alcohol and a cleaning cloth and then wash them well.  
2. Malfunction or non-function resulting in indirect, additional or consequential damages, including but not  
limited to loss of expected income and suspension of business activities.  
3. Incorrect use not in compliance with instructions in this user's manual.  
19. Servicing  
4. Malfunctions resulting from misconnection to other equipment.  
Do not attempt to service this monitor yourself as opening or removing covers may expose you to dangerous  
5. Repairs or modifications made by the user or caused to be made by the user and carried out by an  
electrical or other hazards. Refer all servicing to qualified service personnel.  
unauthorized third party.  
6. Notwithstanding the foregoing, Toshiba's liabilities shall not, in any circumstances, exceed the purchase  
price of the product.  
20. Damage Requiring Service  
Disconnect this monitor from the power supply and refer servicing to qualified service personnel under the  
following conditions.  
Usage Limitation  
The product is not designed for any "critical applications." "Critical applications" means life support systems,  
exhaust or smoke extraction applications, medical applications, commercial aviation, mass transit applications,  
military applications, homeland security applications, nuclear facilities or systems or any other applications where  
product failure could lead to injury to persons or loss of life or catastrophic property damage.  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the monitor.  
c. If the monitor has been submerged in water.  
d. If the monitor does not operate normally by following the operating instructions in the user's manual.  
Adjust only those controls that are covered by the user's manual as an improper adjustment of other  
controls may result in damage and will often require extensive work by a qualified technician to restore  
the monitor to its normal operation.  
Accordingly, Toshiba/TAIS disclaims any and all liability arising out of the use of the product in any critical  
applications.  
e. If the monitor has been dropped or the cabinet has been damaged.  
f. When the monitor exhibiting a distinct change in performance which indicates a need for service.  
g. Other trouble.  
Notes on Use and Installation  
Treat the monitor with care  
Dropping or subjecting the monitor to intense vibration may cause it to malfunction.  
21. Replacement Parts  
When replacing parts be sure the service technician uses parts specified by the manufacturer or have the  
same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other  
hazards.  
Avoid Volatile Liquid  
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products  
touching the unit for a long time. They will leave marks on the finish. Do not use a chemically saturated cloth.  
22. Safety Check  
Upon completion of any service or repairs to this monitor, ask the service technician to perform safety checks  
to determine that the monitor is in proper operating condition.  
Never touch internal parts  
Do not touch the internal parts of the monitor other than the parts specified.  
Keep the monitor installation away from video noise  
If cables are wired near electric lighting wires or a TV set, noise may appear in images. In this event relocate  
cables or reinstall equipment.  
The cold cathode fluorescent lamp contains a small amount of mercury. When the monitor reached the end  
of its useful life, dispose of the used monitor by the approved method in your area, or ask a qualified service  
technician to properly dispose of the monitor.  
Check the ambient temperature and humidity  
Avoid using the monitor where the temperature is hotter or colder than the specified operating range. Doing  
so could affect the internal parts or cause the image quality to deteriorate. Special care is required to use the  
monitor at high temperature and humidity.  
NOTE:  
Should you notice any trouble  
The lamp(s) inside this product contain mercury. Disposal may be regulated due to  
environmental considerations. For disposal or recycling information, contact your local  
authorized dealer or the Electronics Industries Alliance at  
If any trouble occurs while you are using the monitor, turn off the power and contact your dealer. If you continue  
to use the monitor when there is something wrong with it, the trouble may get worse and an unpredictable  
problem may occur.  
5
6
(5) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate  
bracket(s) are attached to the wall and the back of the monitor.  
Monitor Installation  
1.Desktop intstallation  
Observe the following safety precautions:  
(1) Read and Follow the pedestal assembly instructions.  
CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned  
surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble the  
pedestal mentioned below.  
Extreme care should always be used when attaching the  
pedestal stand to avoid damage to the LCD panel.  
Insert the back stand to the pedestal until it clicks.  
Check that the back stand and pedestal are firmly attached  
3.Rack mount installation  
and that the back stand is firmly attached to the LCD monitor.  
If you decide to the Rack mount your LCD monitor, always use a dedicated rack mount bracket below.  
P1710A: ERK-17  
P1910A: ERK-19  
(2) Place the LCD monitor on a sturdy, level surface that can support the weight of the monitor.  
Note: Rack mount bracket is not included. It is sold separately.  
Viewing Angle:  
1) CAUTION: Two people are required for installation.  
For the user’s convenience, the LCD screen may be tilted according to their viewing requirements. The  
monitor can be tilted forward up to 25 degrees or backward up to 5 degrees.  
2) Unplug and remove any cables and/or other component connectors from the monitor.  
3) Remove the screws and back stand. Remove the rivets on the side of monitor.  
4) Always use the screws supplied by the rack mount bracket, and secure the bracket to the monitor.  
2.Wall Mount Installation  
If you decide to wall mount your LCD monitor, always use VESA wall bracket appropriate for the size and  
weight of the LCD monitor.  
5) Follow the instructions provided with your rack. And secure the monitor to the rack by appropriate  
screws.  
VESA Mounting Pattern:  
Hole Pattern (HxV): 100x100 mm  
Screw Size: M4  
(1) CAUTION: Two people are required for installation.  
(2) Unplug and remove any cables and/or other component  
connectors from the monitor.  
(3) Remove the screws and back stand shown.  
(4) Always use the screws supplied or recommended by  
the wall mount manufacturer.  
Note: Use appropriate screws up to 12mm long with  
flat washer and spring washer.  
7
8
AC Adapter  
LCD panel  
The following symptoms are technical limitations of LCD Display technology and are not an indication of  
malfunction; therefore, Toshiba is not responsible for perceived issues resulting from these symptoms.  
Precautions for Use  
Be sure to use only the supplied AC adapter. Using a different AC adapter may cause the  
monitor to malfunction, heat up, or catch fire. Before using the AC adapter, carefully read and  
observe the Important Safeguards ( → page 3) and the notes below.  
An afterimage (ghost) may appear on the screen if a fixed, nonmoving image is displayed for a long period  
of time. The afterimage is not permanent and will disappear in a short period of time.  
Plug the AC adapter into the 100-240V AC outlet. If inserting it into other than 100-240V AC outlet, it may  
The LCD panel contained in this Monitor is manufactured using an extremely high level of precision  
technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does  
not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of  
malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed  
from a normal viewing distance.  
result in electric shock or fire hazard.  
Do not repair, modify or disassemble the AC adapter. It may result in electric shock or fire hazard.  
Keep the Plug free from any dust or dirt. Neglecting to do so may cause a fire due to deterioration of the  
insulation. Pull out the power plug from the outlet before cleaning.  
The fluorescent tube which illuminates the panel from the inside will deteriorate with use. When the LCD  
Do not cover or wrap the AC adapter with a cloth or place it near heating devices. It may cause fire or  
becomes dim, flickers, or does not illuminate, contact your dealer for replacement.  
malfunction of the unit.  
The brightness of the LCD monitor differs slightly depending on the viewing angles. Adjust the angle to  
Protect the power cord from being:  
obtain the best viewing.  
• damaged, modified for extension, or subjected to extreme heat.  
• pulled, located under heavy objects, or pinched.  
• bent, twisted, or bundled.  
Components  
Neglecting to do so may cause electric shock or fire hazard.  
Color LCD Monitor x1  
Do not expose this AC adapter to water.  
Accessories  
Install the AC adapter properly on a wall or ceiling after plugging in the AC adapter. Avoid dropping the AC  
adapter, failing to do so may cause serious personal injury or death.  
• AC adapter x 1  
• Power cord x 1  
• VGA Cable x 1  
• Pedestal x 1  
Do not allow the connectors on the AC adapter to come into contact with any other metal object as this may  
result in short circuit.  
To connect the AC adapter, firmly insert the plug end of the cable into the AC adapter jack.  
• User’s Manual x 1  
Do not insert the plug into other jacks as this may cause a malfunction.  
When removing the connection cable, disconnect the cable by holding its plug. Do not disconnect the cable  
by pulling on the cable.  
External View and Physical Description  
Do not drop the AC adapter or subject it to strong impact.  
Do not use the AC adapter in hot and humid places.  
Do not use the supplied AC adapter with devices other than this monitor.  
P1710A  
Temperature increasing on the surface of the adapter is normal. Before moving the adapter to another  
15.193 (385.89)  
13.425 (341)  
location, unplug it from the wall outlet, and wait until its temperature decreases.  
Buzzing noises may come from inside. This does not indicate malfunction.  
Using the AC adapter near a radio, TV, cell phone, or any wireless devices/equipment may cause  
interference. Use the adapter at sufficient distances from these devices.  
Input and output connectors  
Threaded  
hole for  
rack mount  
bracket  
P1710A  
Be sure to use the supplied AC adapter. Using different AC adapter may cause fire hazard or the monitor to  
LCD Panel  
malfunction.  
Threaded hole for VESA  
wall bracket  
Specifications  
Model: EA10521E-120 ( This is for P1710A and P1910A )  
Power source: 100-240V AC 1.8A, 50/60 Hz  
Rated output: 12V DC 3.5A  
3.031  
(77)  
2.165  
(55)  
Back stand  
inch(mm)  
Pedestal  
7.874 (200)  
9.449 (240)  
Ambient temperature guaranteed for performance: 0° C to 40° C (32° F to 104° F)  
Storage temperature: -20° C to 85° C (-4° F to 185° F)  
Maximum external dimensions (Length x width x height): 120 x 60 x 35 mm (4.72 x 2.36 x 1.38 inches)  
DC cord length: 1500 mm (59 inches)  
Mono Speaker  
Front control panel  
9
10  
P1910A  
BNC 2 IN: Input connector of Video. (BNC connector)  
Type  
Composite video (NTSC or PAL)  
75Ω  
Input impedance  
16.7 (424.19)  
14.933 (379.3)  
Note: This video channel is shown as “AV1” on the screen.  
BNC 2 OUT: Output connector of Video.(BNC connector)  
Type  
Output impedance  
Composite video (NTSC or PAL)  
75Ω  
Input and output connectors  
Threaded  
hole for  
P1910A  
rack mount  
bracket  
LCD Panel  
Threaded hole for VESA  
wall bracket  
AUDIO IN: Input connector of Audio. (RCA Jack)  
Input  
0.5Vrms @1KHz (Mono)  
AUDIO OUT: Output connector of Audio. (RCA Jack)  
Back stand  
2.913  
(74)  
2.283  
(58)  
Output  
Maximum 0.85Vrms @1KHz (Mono)  
Pedestal  
inch(mm)  
7.874 (200)  
9.449 (240)  
Note: Audio output signal is controlled by the volume in the OSD.  
Mono Speaker  
Front control panel  
Input and Output connectors  
Setup for Monitor  
DC 12V IN: Input connector of power. Connect to the output cable of AC adapter.  
DVI IN: Input connector of DVI-D format RGB.  
Type  
TDMS Digital RGB.  
Input impedance  
100Ω (differential)  
Note:  
• DVI-D doesn’t support audio signal. Connect audio cable separately.  
1.Front control panel  
Power Switch: Push to switch power on/off.  
• DVI-D doesn’t support analog RGB and digital component signals. If you convert this connector to HDMI,  
it is able to support digital RGB only.  
LED Indicator: Power light indicator.  
• This monitor doesn’t support HDCP(High-bandwidth Digital Content Protection) signal. Don’t connect to  
: This switch has multi-function mentioned below.  
[+ Mode]  
the HDMI connector of DVD player.  
(1) Push to change input Source. (VGA, DVI, AV, AV1)  
(2) Push to select Picture, Setup or PC in Menu.  
(3) Push to increase the value of Menu selected.  
VGA IN: Input connector of analog RGB.  
Type  
Analog RGB (VGA)  
Input impedance  
75Ω  
: This switch has multi-function mentioned below.  
[− Auto]  
BNC 1 IN: Input connector of Video. (BNC connector)  
(1) VGA signal auto adjustment.  
Type  
Input impedance  
Composite video (NTSC or PAL)  
75Ω  
(2) Push to select Picture, Setup or PC in OSD Menu.  
(3) Push to decrease the value of Menu selected.  
Note: This video channel is shown as “AV” on the screen.  
[
]
: This switch has multi-function mentioned below.  
(1) Select Menu upwards.  
BNC 1 OUT: Output connector of Video.(BNC connector)  
(2) Push this switch to adjust contrast directly,  
Type  
Composite video (NTSC or PAL)  
and push [+ Mode] or [− Auto] to change the value of contrast.  
Output impedance  
75Ω  
11  
12  
[
]
6.VGA / DVI Menu and definition of functions  
: This switch has multi-function mentioned below.  
(1) Select Menu downwards.  
(2) Push this switch to adjust brightness directly,  
(1) VGA / DVI – Picture tab  
and push [+ Mode] or [− Auto] to change the value of brightness.  
[ Menu ]  
: Call or close the Menu. Push to return to the previous item  
2.Selection of input signal  
Brightness  
<
50  
50  
0
>
>
>
>
>
>
>
>
Contrast  
<
<
Source  
VGA  
DVI  
(1) Push the [+ Mode] switch.  
Sharpness  
[
]
[
]
(2) The following OSD is shown. Push the  
switch to select input signal.  
or  
Hue  
Color  
50  
50  
<
<
(3) Push the [+ Mode] switch again.  
(4) Push the [ Menu ] switch to clear.  
AV  
Full  
Display Mode  
Color Temp  
<
<
<
AV1  
User  
Color Temp R  
50  
Picture  
Setup  
PC  
3. Adjustment of contrast and Brightness  
* Above items and value are subject to change without notice *  
[
]
[
]
(1) Push the  
or  
switch.  
(2) The adjustment window is shown. Push the [+ Mode] or [− Auto] switch to adjust to the appropriate  
value.  
(3) Push the [ Menu ] switch to clear this window. (Or, adjustment window will disappear within 10 seconds  
Menu  
Value  
0~100  
Definition of functions  
Adjust the luminance level of the  
screen image  
automatically.)  
Brightness  
Adjust the contrast level of the  
screen image  
Adjust the sharpness of the screen  
image  
Adjust the saturation of color of the  
screen image  
Contrast  
0~100  
0~100  
0~100  
4.Lock a switch and unlock  
[ Menu ]  
[
]
(1) Push the  
and  
switch at once.  
Sharpness(*)  
Color(*)  
(2) “LOCK” is shown on the screen. And all switches are suspended.  
[ Menu ]  
[
]
(3) Push the  
and  
switch at once again.  
Push [+] or [−] switch to choose the  
(4) “UNLOCK” is shown on the screen and released.  
User (individual setting)  
color temperature (If you set “User”,  
Color Temp.  
sRGB(6500K)/7500k/9300K the following settings become  
effective.)  
5.Menu function  
Adjust color value of Red of the  
screen image  
Adjust color value of Green of the  
screen image  
Adjust color value of Blue of the  
screen image  
Color Temp R  
Color Temp G  
Color Temp B  
0~100  
(1) Push the [ Menu ] switch.  
(2) The Menu is divided into three tabs, Picture, Setup and PC.  
They will appear under selected source signal.  
• VGA: Picture, Setup and PC tab will be shown.  
• DVI, AV, and AV1: Picture and Setup tab will be shown.  
0~100  
0~100  
[
]
[
]
(3) Push the  
or  
switch to select menu item.  
(*) DVI input only.  
(4) Push the [+ Mode] or [− Auto] switch to change the value of selected item.  
(5) Push the Menu switch to accept and return to the previous item.  
13  
14  
(2)VGA / DVI - Setup tab  
(3) VGA – PC tab (VGA input only)  
Image H Position  
Image V Position  
Phase  
50  
50  
0
<
<
<
<
>
>
>
>
>
OSD H Position  
50  
82  
60  
50  
<
<
<
<
<
<
<
>
>
>
>
>
>
>
OSD V Position  
OSD Time out  
Volume  
Clock  
40  
Auto Adjust  
Language  
Back Light  
N.R.  
English  
High  
Middle  
PIP Set  
>
Picture  
Setup  
PC  
Picture  
Setup  
PC  
* Above items and value are subject to change without notice *  
* Above items and value are subject to change without notice *  
Menu  
Value  
Definition of functions  
Image H Position 0~100  
Image V Position 0~100  
Adjust the horizontal position of the screen image  
Adjust the vertical position of the screen image  
Adjust the phase right to display clear image on the screen  
Adjust the clock right to display clear image on the screen  
Push [+] or [−] to set automatic adjustment of monitor setting  
Menu  
Value  
Definition of functions  
Adjust the horizontal position of  
Menu on the screen  
Adjust the vertical position of Menu  
on the screen  
Phase  
Clock  
0~63  
0~90  
OSD H-Position 0~100  
OSD V-Position 0~100  
Auto Adjust  
Note: These adjustments work for VGA input only.  
Adjust the time-out period from  
Menu mode  
Push [+] or [−] switch to control the  
speaker volume  
OSD Time Out  
Volume  
5~60  
0~100  
7.Composite Video OSD Menu and definition of functions  
English, a couple of Chinese,  
German, French, Spanish, Italian  
Language  
Backlight  
Select your language of OSD  
(1) AV, AV1 (Video) – Picture tab  
Push [+] or [−] switch to adjust the  
back light of LCD  
High, Middle, Low  
Push [+] or [−] switch to adjust the  
level of noise reduction of the screen  
image  
N.R.  
0~100  
Push [+] switch to enter the sub-  
menu  
Push [+] switch to reset to the  
default value  
PIP Set  
Reset  
0~100  
Brightness  
Contrast  
50  
50  
50  
50  
50  
<
<
<
<
<
<
<
>
>
>
>
>
>
>
>
Off, High, Middle, Low  
Sharpness  
Hue  
Color  
Full  
Display Mode  
Color Temp  
Color Temp R  
User  
51  
<
Picture  
Setup  
* Above items and value are subject to change without notice *  
15  
16  
(3) PIP mode Setup  
Menu  
Brightness  
Contrast  
Value  
0~100  
0~100  
0~100  
Definition of functions  
Adjust luminance level of the screen image  
Adjust contrast level of the screen image  
Adjust the sharpness of the screen image  
Adjust the hue of color of the screen image  
(NTSC video only)  
Sharpness(*)  
Hue  
0~100  
0~100  
Color(*)  
Adjust the saturation of color of the screen image  
VGA  
Small  
Source  
Display Mode  
Full, 4:3, 16:9, Over, Under, 1:1 Adjust the display scan mode  
<
<
<
>
>
>
>
Push [+] or [−] button to choose the color  
temperature  
Color Temp.  
Warm/Cool/User  
Multi Picture  
PIP Position  
PIP Swap  
Color Temp R  
Color Temp G  
Color Temp B  
0~100  
0~100  
0~100  
Adjust color value of Red of the screen image  
Adjust color value of Green of the screen image  
Adjust color value of Blue of the screen image  
PIP Position 1  
Setup / PIP Set  
(2) AV, AV1 – Setup  
* Above items and value are subject to change without notice *  
Menu  
Value  
(1)  
Definition of functions  
Push [+] or [−] switch to select the source on sub  
screen  
Source  
None, Small, Middle, Large, POP Push [+] or [−] to select the PIP mode and size of  
OSD H Position  
OSD V Position  
OSD Time out  
Volume  
50  
>
<
<
<
<
<
<
<
>
Multi picture  
PIP Position  
PIP Swap  
(2)  
PIP screen  
82  
>
Push [+] or [−] to select the position of PIP  
screen  
PIP Position 1, 2, 3, 4, and 5 (3)  
60  
>
Under PIP mode, push [+] to swap main screen  
for PIP screen  
50  
>
Language  
Back Light  
N.R.  
English  
>
High  
>
Middle  
>
(1) For this selection, there will be a difference in the source value you selected on the main screen.  
PIP Set  
Note: If you select composite video on the main screen, you cannot select other composite video on the  
PIP screen.  
Picture  
Setup  
*
Above items and value are subject to change without notice *  
(2) None: PIP mode OFF  
Small: Full width at fifth maximum  
Middle: Full width at fourth maximum  
Large: Full width at third maximum  
POP: Split screen  
Note: This setup is the same as VGA / DVI - Setup tab on page 15.  
(3) Position 1: Upper left  
Position 2: Lower left  
Position 3: Middle  
Position 4: Upper right  
Position 5: Lower right  
Note: When PIP window is shown, if you select VGA input, the auto adjust doesn’t work.  
17  
18  
P1710A / P1910A Specification  
MEMO  
Model Number  
Panel Size  
P1710A  
17.0”  
P1910A  
19.0”  
Aspect Ratio  
5:4  
5:4  
640 x 480 @ 60/73/75  
800 x 600 @ 56/60/72/75  
1024 x 768 @ 60/70/75  
1280 x 1024 @ 60/75  
380cd/m2 (Typ.) (1)  
1000:1(Typ.) (1)  
170° / 170°(Typ.) (1)  
5ms(Typ.)(1)  
640 x 480 @ 60/73/75  
800 x 600 @ 56/60/72/75  
1024 x 768 @ 60/70/75  
1280 x 1024 @ 60/75  
250cd/m2 (Typ.) (1)  
1000:1(Typ.) (1)  
170° / 170°(Typ.) (1)  
5ms(Typ.) (1)  
16.7M  
Resolution / Scan  
Brightness  
Contrast  
Panel Viewing Angle(H/V)  
Response Time  
Display color  
16.7M  
Sync. Format  
NTSC / PAL  
Frequency (Horizontal)  
Frequency (Vertical)  
Video Interface  
VGA/DVI: 31.5K - 80KHz, Video: 15750 / 15625Hz (NTSC/ PAL) (2)  
VGA/DVI: 56Hz -75Hz, Video: 50 / 60Hz (2)  
Video Input x 2 (BNC), Video Output x 2 (BNC)  
75 ohm (Auto Termination)  
Termination  
Graphic Interface  
Interfaces  
Analog RGB Input x 1(D-Sub 15), Digital RGB (DVI-D) Input x 1  
Audio Input x 1, Audio Output(volume engaged) x 1  
1W x 1  
Audio Interface  
Built-in Speakers  
PIP  
YES  
English, Traditional Chinese, Simplified Chinese, French, German,  
Spanish, Italian  
OSD Language  
VESA Mounting  
Weight (NET)  
VESA 100  
10.2lb (4.6kg)  
10.9lb (4.8kg)  
15.2x16.0x9.4 inch  
(386x407x240 mm)  
16.7x17.2x9.4 inch  
(424x437x240 mm)  
External Dimensions (WxHxD)  
Safety & EMI  
AC adapter : UL, CUL, FCC/B  
Monitor : FCC/B  
Power supply  
12V DC ± 10 %  
Current Consumption (max.)  
Temp (Oper.)  
Humidity  
12V DC / 3A  
12V DC / 2A  
32°F – 104°F (0°C-40°C)  
20% ~ 80%  
Accessories  
Pedestal, AC Adapter, Power cord, VGA cable, User’s Manual  
Design and Specifications are subject to change without notice.  
(1) These values of specification are from panel spec.  
(2) It is not guaranteed for all the specified range.  
19  
20  
MEMO  
MEMO  
21  
22  

Westcott 4834 User Manual
Vulcan Hart IR1 User Manual
Transition Networks MEDIA CONVERTER A CF 01 User Manual
Sony MDX M690 User Manual
Sony M 950 User Manual
Sony HANDYCAM XR350V User Manual
Sony Ericsson HBH GV435a User Manual
Sony CDX M750 User Manual
Sony AC UD11 USB Power Adapter for DSC RX100 ACUD11 User Manual
Sharp EL 1197PIII(U1U) 1 User Manual