Speco Technologies LCD Monitor VM15LCD User Manual

Thank you for purchasing our product  
.
Please read this Users Manual before  
using the product  
without notice.  
.
Changes may be made  
VM15LCD, VM17LCD, VM19LCD  
LCD MONITOR  
User manual  
type plug has two blades and a third grounding prong.  
This monitor is designed to operate on 100-240V AC supply. Do not  
connect too many appliances to the same outlet as this can cause electric  
shock.  
4
3
EANING  
MOUNTING  
Unplug the unit from the wall outlet before cleaning.  
Do not use liquid or aerosol cleaners. Use a dry soft lint-free cloth for  
cleaning. If the dust is persistent, wipe with a slightly damp cloth.  
Place the monitor on a secure table or have it properly mounted to the  
wall. Do not hang anything on the monitor.  
Caution: The wall mount must bear a minimum of five times the monitor’s  
net weight without causing damage. To mount your monitor to the wall,  
you will need to remove the base before attaching the wall mount.  
SERVICE  
Use only the power source and connections appropriate for the monitor as  
indicated on the marking label.  
A. Place the monitor face down on a surface that is soft, yet strong enough  
to hold the monitor.  
If the power cord or plug is damaged, liquid has been spilled,  
objects have fallen into the apparatus, apparatus has been exposed to  
rain or moisture, does not operate manually, or has been dropped, the  
product needs servicing.  
B. Use a screwdriver to remove the screws from the four holes on each side  
of the bottom of the monitor’s base (only use with base)  
C. Make sure all cables are already connected to the monitor.  
D. Follow the directions included with the wall mount to mount the monitor  
to the wall.  
INACTIVE  
Unplug the monitor when unused for long periods of time.  
VENTILATION  
Never cover or block the ventilation slits in the monitor. Ventilation slits  
are provided to prevent the temperature from rising. A minimum distance  
of at least 10 cm should be maintained around the unit for sufficient  
ventilation.  
Never insert any foreign object, metal or liquid into the ventilation slits, as  
this could result in fire or electric shock.  
Do not install the DVR or other equipment too close to the monitor.  
Keep equipment at least 30 cm away from the monitor.  
WATER AND MOISTURE  
The monitor should not be exposed to dripping or splashing. No  
objects filled with liquids should be placed on the monitor.  
Do not use the monitor near water.  
Do not touch the monitor or cable with wet hands as this may cause  
electric shock or damage.  
Connection  
5
6
1. Rear interface  
2. Connection under various signal input mode  
(Ⅰ)Connecting with PC, DVR at VGA  
This connection allows you to connect to a PC or DVR. Connect one end  
of a 15-pin monitor cable to the VGA VIDEO jack on the monitor and the  
other end to the PC or the DVR's video output jack. Note, if your PC's  
video output isn't 15-pin, you'll need an adapter that can connect to a 15-  
pin monitor cable.  
Connect your audio cable.  
Explanation of connectors  
Connect a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8"  
stereo mini pin) to the PC AUDIO jack on the back of the monitor and the  
other end to the Audio Output jack on the PC or DVR.  
Viewing the PC or DVR  
1. Plug in the monitor and the PC, if they aren't already plugged in.  
2. Turn on the monitor and the PC.  
3. Repeatedly press the SOURCE button to switch the display channel  
until you see VGA displayed at the top of the monitor's screen. To go  
back to viewing AV video, press the SOURCE button to enter AV mode.  
This section describes the jacks on the back panel of your monitor. There  
are several ways to connect devices.  
DC12V: Use only the power supply included with the monitor  
DVI: Connect with detachable DVI cable  
Remark: DVI cable is for Dual mode use only.  
VGA: Connect your computer, or other device with a VGA output, to this  
jack using a 15 pin D-sub cable.  
PC AUDIO IN: (Stereo mini jack) Use to obtain sound when a PC is  
connected to the VGA jack. Use a 3.5 mm stereo mini pin cable  
(sometimes referred to as 1/8” stereo mini pin) to connect a PC to your  
monitor.  
VIDEO INPUT (AV1/AV2 IN): Lets you connect a device that has  
composite video jacks, such as a DVR or Camera  
VIDEO OUTPUT (AV OUT): Composite video loop though (to another  
monitor or recorder)  
(Ⅱ)Connecting the Device with Video  
This connection allows you to connect a device that has a Video Output,  
like, a camera or DVR etc.  
Note: If the device you're connecting also has Component Video jack and  
you have component video cables, we recommend you use the  
Component Video (Advanced) Connection instead.  
Connect your video cable (BNC).  
Connect a video cable to the BNC INPUT jack on the back of the monitor.  
Connect your red and white audio cables.  
AUDIO L and R: AV audio interface. The left audio connector is usually  
white. The right audio connector is usually red.  
Connect the audio (red and white) cables to the AUDIO INPUT R and L  
jacks on the back of the monitor and to the Audio Output jacks on the  
DVR.  
3. Make sure the video image is centered within the screen area. Use the  
monitor controls to adjust the image, if necessary. Perform an Auto  
Configuration first, then if you wish you can adjust the horizontal and  
vertical position, contrast, and brightness to better suit your video card  
and your personal preferences. Refer to Basic OSD setup for more  
information on using the on-screen menu to adjust the video display.  
Controls  
7
8
Viewing the Picture From the Connected Device  
1. Plug in the monitor and the device if they aren't already plugged in.  
2. Turn on the monitor and the device you want to view, for example a  
camera.  
Front Controls  
(a) 5 Key Series  
3. Repeatedly press the SOURCE button until you see AV displayed at  
the top of the monitor's screen.  
Note: If the picture from the DVR is blue and your device is connected to  
the VIDEO Input, you might be tuned to the wrong input. Make sure you  
press Source until you see AV displayed at the top of the monitor's screen.  
SOURCE MENU  
-
+
POWER  
1. POWER: Turn the monitor on or off.  
2. SOURCE: Press this button to switch between input modes AV, DVI ,  
and VGA. On-screen OSD mode, press this button (move up or down)  
to select a sub menu.  
3. Connecting the Monitor Cables to your Computer  
Make sure all cable connections are fastened -- tighten all cable screws.  
Shaking and vibration may dislodge cables that are improperly connected.  
Route all wiring and cabling away from heat sources and sharp metal  
edges to avoid damage.  
3. MENUPress to view the On-screen OSD of the unit. Sub-menus,  
features, and settings differ according to input mode on the on-screen  
display, press this button to exit from main menu, sub-menus, features  
and settings.  
4. Testing the Monitor  
4. and : Press button to Increase or button to decrease volume  
After connecting, turn on the power switch located at the rear (or side) of  
the bezel. Before you test your monitor, make sure all cables are  
connected properly and routed through the cable management system. Be  
sure to tighten all cable screws. To test that the monitor is working properly:  
1. Turn on your pc or DVR.  
from 1-100on-screen OSD , press or to adjust the settings.  
5. Remote indicator: red when standby mode and blue when on display.  
2. Make sure the video image is displayed. If it is not, turn on your monitor.  
Ensure the LED indicator is blue red indicates power but no signal.  
(b)Choose the input source  
I
MenuSetup  
PICTURE  
none or no signal will appear on the screen. Press the source button on the  
monitor or remote control and the menu will appear on the screen. Then  
press source to select the monitor item and press“ +/- ” to save it.  
VGA: The input source from VGA terminal output.  
CONTRAST: Adjusts the difference  
between the light and dark areas of the  
picture. (Adjustment range:0-100)  
DVI: The input source from DVI terminal output.  
BRIGHTNESS: Adjusts the brightness of  
AV: The input source from AV or video camera terminal output.  
the picture. (Adjustment range:0-100)  
COLOR TEMP: Press + or button to  
go into the Color Temp sub menu. Press  
the “+” button to change the color intensity  
of the temperature selected (Normal,  
Warm, Cool, S-RGB, User)  
9
Color temp.  
BASIC ON-SCREEN DISPLAY SETUP  
(1) Press the MENU button to see the menu.  
USER : USER-R: 0~255  
USER-G: 0~255  
(2) Press or to select the menu item and press SOURCE button to  
select the Sub menu.  
USER-B: 0~255  
.
(3) Press or to adjust the settings.  
(4) Press the MENU button to return to the previous menu.  
1. VGA Input Mode  
10  
11  
BASS: Adjustment range:0-100  
TREBLE: Adjustment range:0-100  
BALANCE: Adjusts how much audio is  
sent to the left and right (-50 to +50).  
The intermediate value is 0. When  
indication value of balance increases  
toward +50, the volume of the right and  
left speaker increase and decrease. When  
the indication value of balance decreases  
toward -50 the volume of the right and left  
speaker increase and decrease.  
SLEEP-TIMER: Adjusts the amount of  
time until the screen goes to sleep. (OFF,  
15min, 30min, 45min, 60min)  
FUNCTION  
AUDIO  
DLC: ON / OFF  
NOISE REDUCTION:  
Function unavailable  
SOUND MODE: Provides special  
processing through your speakers  
(depending on the setting you chose as  
your Sound Type). The available audio  
modes are: Standard, User, Movie, Music)  
AVC (Automatic Volume Control) ON & OFF  
HSTARTHSIZEVSTARTVSIZE:  
Function unavailable  
H-POSITIONMoves the image on  
screen either left () or right ().  
V-POSITIONMoves the image on  
screen either up () or down ().  
CLOCKIf the clock is not fine-tuned, you  
may observe periodic vertical bars of  
video noise on your image. These bars of  
noise are usually adjusted out when an  
Auto Configuration is performed. If the  
bars of noise are still present, this setting  
can be adjusted manually.  
LANGUAGE: Lets you select your  
preferred language for the menus:  
(English, Chinese, German, French,  
Spanish, Italian, Portuguese, and  
Russian)  
H-POSITION: Adjust the OSD image  
horizontally by pressing the + or buttons.  
V-POSITION: Adjust the OSD image  
GEOETRY  
OSD  
vertically by pressing the or buttons.  
DURATION:5-60  
HALFTONE:0-100  
PHASEAdjusts the signal phase to  
BACKLIGHT: HIGH MID LOW  
improve sharpness when the image is  
fuzzy.  
AUTO ADJUST: Performs automatic  
configuration of the Phase, Clock, vertical,  
and horizontal position settings.  
MEMORY RECALL: Pressing the + or -  
buttons will be reset all settings to the  
factory default settings.  
11  
12  
LANGUAGE: Lets you select your  
preferred language for the menus:  
(English, Chinese, German, French,  
Spanish, Italian, Portuguese, or Russian)  
OSD H-POSITION: Adjust the OSD image  
horizontally by pressing the + or buttons.  
OSD V-POSITION: Adjust the OSD image  
vertically by pressing the + or buttons.  
DURATION: 5-60  
2. AV Input Mode  
PICTURE  
BRIGHTNESS: Adjusts the brightness of  
the picture.  
CONTRAST: Adjusts the difference  
between the light and dark areas of the  
picture.  
HUE: -50 to +50 (only available on AV  
PAL)  
SATURATION: 0-100  
OSD  
HALFTONE: 0-100  
BACKLIGHT: HIGH MID LOW  
SHARPNESS: 0-100  
MEM-RECALL: Pressing the + key will be  
reset all settings to the factory default  
settings.  
COLOR TEMP: Press the “+” button to  
change the color intensity of the  
temperature selected (Normal, Warm,  
Cool, S-RGB, User)  
SCALE: Full, Normal, or Center  
PICTURE MODE: User, Standard, Soft, or  
Vivid  
BASS- Adjustment range:0-100  
TREBLE- Adjustment range:0-100  
BALANCE- Adjusts how much audio is  
sent to the left and right (-50 to +50).  
The intermediate value is 0. When  
indication value of balance increases  
toward +50, the volume of the right and left  
speaker increase and decrease. When the  
indication value of balance decreases  
toward -50 the volume of the right and left  
speaker increase and decrease.  
SOUND MODE: Provides special  
processing through your speakers  
(depending on the setting you chose as  
your Sound Type). The available audio  
modes are: User. Standard, Movie, and  
Music.  
SLEEP-TIMER: Lets you set the monitor  
to turn off after a given amount of time  
(OFF, 15min, 30min, 45min, 60min)  
FUNCTION  
AUDIO  
DLC: ON / OFF  
NOISE REDUCTIONOFFLOW 、  
HIGH)  
HSTARTHSIZEVSTARTVSIZE:  
Only available under AV Mode.  
Adjust the OSD image horizontally or  
vertically by pressing the -/ +button.  
AVC (Automatic Volume Control)  
ON & OFF  
14  
13  
3. DVI Input mode  
PICTURE  
LANGUAGE: Lets you select your  
preferred language for the menus:  
(English, Chinese, German, French,  
Italian, Spanish, Portuguese, or Russian)  
CONTRAST: Adjusts the difference  
between the light and dark areas of the  
picture.  
BRIGHTNESS: Adjusts the brightness of  
the picture.  
OSD  
H-POSITION: Adjust the OSD image  
horizontally by pressing the + or buttons.  
COLOR TEMP: Press + or button to  
go into the Color Temp sub menu. Press  
the “+” button to change the color intensity  
of the temperature selected (Normal,  
Warm, Cool, S-RGB, User)  
USER:  
V-POSITION: Adjust the OSD image  
vertically by pressing the + or buttons.  
DURATION: 5-60  
USER-R : 0~255  
USER-G : 0~255  
HALFTONE: 0-100  
USER-B : 0~255  
BACKLIGHT: HIGH MID LOW  
BASS- Adjustment range:0-100  
TREBLE- Adjustment range:0-100  
BALANCE- Adjusts how much audio is  
sent to the left and right (-50 to +50).  
The intermediate value is 0. When  
indication value of balance increases  
toward +50, the volume of the right and  
left speaker increase and decrease. When  
the indication value of balance decreases  
toward -50 the volume of the right and left  
speaker increase and decrease.  
SOUND MODE: Provides special  
processing through your speakers  
(depending on the setting you chose as  
your Sound Type). The available audio  
modes are: User, Standard, Movie, and  
Music.  
MEM-RECALL: Pressing the + or key  
will reset all settings back to the factory  
default settings.  
AUDIO  
SLEEP-TIMER: Lets you set the monitor  
to turn off after a given amount of time  
(OFF, 15min, 30min, 45min, 60min)  
FUNCTION  
DLC: ON / OFF  
NOISE REDUCTION:  
Function unavailable  
HSTARTHSIZEVSTARTVSIZE:  
Function unavailable  
AVC (Automatic Volume Control) ON &  
OFF  
16  
15  
Specifications  
Model  
VM15LCD VM17LCD VM19LCD  
Model  
VM15LCD VM17LCD  
VM19LCD  
Audio Inputs  
Auto Adjustment  
Wall Hanging  
VESA Size  
Stand  
Stereo PC / Audio R and L  
Size  
15 inch  
17 inch  
19 inch  
Yes  
VESA Standard  
100 x 100 mm  
Aspect Ratio  
4:3  
Resolution (H x V) 1024 x 768  
1280 x 1024  
Yes (Plastic)  
Colors  
16.7M  
Bezel  
Plastic  
English, Spanish, French, German,  
Portuguese, Russian, Italian, and Simplified  
Chinese  
Viewing Angle  
Viewing Lines  
Contrast Ratio  
H: 170º V: 160º  
500 TV Lines  
OSD Language  
Power  
20W  
30W  
40W  
800:1  
6ms  
Consumption  
Power Supply  
OSD Control  
Response Time  
3D Comb Filter  
with De-interlace  
3D Noise  
Reduction  
Brightness  
DC12V / 4A  
Yes  
Power Cord, Adapter, User’s Guide, and  
2D  
3D  
Accessories  
Audio Cable  
Packaging (mm3)  
(L x D x W)  
410 x 142 x 410 450 x 150 x 450 480 x 165 x 500  
270 cd/m2  
Packaging (inch3)  
(L x D x W)  
16 1/8 x 5 5/8 x  
16 1/8  
17 3/4 x 6 x  
17 3/4  
18 7/8 x 6 1/2 x  
19 11/16  
Speakers  
2 each (2.5 watts)  
Composite  
Inputs / Outputs  
VGA  
3.3 Kg  
7.3 lb  
4.9 Kg  
10.8 lb  
5.5 Kg  
12.1 lb  
BNC x 1 / BNC x 1  
Weight (Kg / lb)  
Operating Temp  
Safety  
32o F - 122o F  
VGA x 1  
DVI x 1  
DVI  
Energy Star, FCC-DOC, CE, RoHS  
18  
19  

Standard Horizon Car Amplifier BMF1000D User Manual
Sony MDS SP55 User Manual
Sony FCB EX980P User Manual
Sony DVW 700WS User Manual
Sony CDX GT310 User Manual
Sony CCD TRV 10 E User Manual
Sony Camcorder CX700 User Manual
Sharp Calculator TINSZ0638EHZZ User Manual
Samsung SC M110 User Manual
Rosewill Blender R W320 T User Manual