Sony HDR CX690E User Manual

Disposal of Old Electrical  
& Electronic Equipment  
(Applicable in the European  
Union and other European  
countries with separate  
collection systems)  
FOR CUSTOMERS IN EUROPE  
Hereby, Sony Corporation, declares that  
this HDR-CX560VE/CX700VE Digital HD  
Video Camera Recorder is in compliance  
with the essential requirements and other  
relevant provisions of the Directive 1999/5/  
EC. For details, please access the following  
This symbol on the product or on its  
packaging indicates that this product shall  
not be treated as household waste. Instead  
it shall be handed over to the applicable  
collection point for the recycling of  
electrical and electronic equipment.  
By ensuring this product is disposed of  
correctly, you will help prevent potential  
negative consequences for the environment  
and human health, which could otherwise  
be caused by inappropriate waste handling  
of this product. The recycling of materials  
will help to conserve natural resources.  
For more detailed information about  
recycling of this product, please contact  
your local Civic Office, your household  
waste disposal service or the shop where  
you purchased the product.  
Notice for the customers in the  
countries applying EU Directives  
The manufacturer of this product is Sony  
Corporation, 1-7-1 Konan Minato-ku  
Tokyo, 108-0075 Japan. The Authorized  
Representative for EMC and product safety  
is Sony Deutschland GmbH, Hedelfinger  
Strasse 61, 70327 Stuttgart, Germany. For  
any service or guarantee matters please  
refer to the addresses given in separate  
service or guarantee documents.  
ATTENTION  
Disposal of waste batteries  
(applicable in the European  
Union and other European  
countries with separate  
collection systems)  
The electromagnetic fields at the specific  
frequencies may influence the picture and  
sound of this unit.  
This product has been tested and found  
compliant with the limits set out in the  
EMC Directive for using connection cables  
shorter than 3 meters (9.8 feet).  
This symbol on the battery or on the  
packaging indicates that the battery  
provided with this product shall not be  
treated as household waste.  
On certain batteries this symbol might  
be used in combination with a chemical  
symbol. The chemical symbols for mercury  
(Hg) or lead (Pb) are added if the battery  
contains more than 0.0005% mercury or  
0.004% lead.  
Notice  
If static electricity or electromagnetism  
causes data transfer to discontinue midway  
(fail), restart the application or disconnect  
and connect the communication cable  
(USB, etc.) again.  
By ensuring these batteries are disposed of  
correctly, you will help prevent potentially  
negative consequences for the environment  
and human health which could otherwise  
be caused by inappropriate waste handling  
of the battery. The recycling of the materials  
GB  
will help to conserve natural resources.  
In case of products that for safety,  
Regulatory Information  
Declaration of Conformity  
Trade Name: SONY  
Model No.: HDR-CX700E  
Responsible Party: Sony Electronics Inc.  
Address: 16530 Via Esprillo, San Diego,  
CA 92127 U.S.A.  
Telephone No.: 858-942-2230  
This device complies with Part 15 of the  
FCC Rules. Operation is subject to the  
following two conditions: (1) This device  
may not cause harmful interference,  
and (2) this device must accept any  
interference received, including  
interference that may cause undesired  
operation.  
performance or data integrity reasons  
require a permanent connection with an  
incorporated battery, this battery should  
be replaced by qualified service staff only.  
To ensure that the battery will be treated  
properly, hand over the product at end-of-  
life to the applicable collection point for  
the recycling of electrical and electronic  
equipment.  
For all other batteries, please view the  
section on how to remove the battery from  
the product safely. Hand the battery over  
to the applicable collection point for the  
recycling of waste batteries.  
For more detailed information about  
recycling of this product or battery, please  
contact your local Civic Office, your  
household waste disposal service or the  
shop where you purchased the product.  
Declaration of Conformity  
Trade Name: SONY  
Model No.: HDR-CX560E  
Responsible Party: Sony Electronics Inc.  
Address: 16530 Via Esprillo, San Diego,  
CA 92127 U.S.A.  
Telephone No.: 858-942-2230  
This device complies with Part 15 of the  
FCC Rules. Operation is subject to the  
following two conditions: (1) This device  
may not cause harmful interference,  
and (2) this device must accept any  
interference received, including  
interference that may cause undesired  
operation.  
For customers in the U.S.A.  
If you have any questions about this  
product, you may call:  
Sony Customer Information Center 1-800-  
222-SONY (7669).  
The number below is for the FCC related  
matters only.  
CAUTION  
You are cautioned that any changes or  
modifications not expressly approved in  
this manual could void your authority to  
operate this equipment.  
GB  
Supplied items  
Note  
This equipment has been tested and found  
to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the  
FCC Rules.  
The numbers in ( ) are the supplied  
quantity.  
AC Adaptor (1)  
Power cord (Mains lead) (1)  
Component A/V cable (1)   
A/V connecting cable (1)   
USB connection support cable (1)   
Use this cable when the Built-in USB Cable  
of the camcorder (p. 12) is too short for  
connection.  
Lens hood (1) (Only for HDR-CX690E/  
CX700E/CX700VE)   
To attach the lens hood, see page 74.  
Wireless Remote Commander (1)  
A button-type lithium battery is already  
installed. Remove the insulation sheet before  
using the Wireless Remote Commander.  
Rechargeable battery pack NP-FV50 (1)  
CD-ROM “Handycam” Application  
These limits are designed to provide  
reasonable protection against harmful  
interference in a residential installation.  
This equipment generates, uses, and  
can radiate radio frequency energy and,  
if not installed and used in accordance  
with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that  
interference will not occur in a particular  
installation. If this equipment does cause  
harmful interference to radio or television  
reception, which can be determined by  
turning the equipment off and on, the  
user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the  
equipment and receiver.  
Connect the equipment into an outlet on  
a circuit different from that to which the  
receiver is connected.  
Software (1) (p. 37)  
“PMB” (software, including “PMB Help”)  
“Handycam” Handbook (PDF)  
“Operating Guide” (This manual) (1)  
Consult the dealer or an experienced radio/  
TV technician for help.  
The supplied interface cable must be used  
with the equipment in order to comply with  
the limits for a digital device pursuant to  
Subpart B of Part 15 of FCC Rules.  
This camcorder has a built-in software  
application called “PMB Portable” (p. 40).  
See page 19 for the memory card you can use  
with this camcorder.  
Battery pack  
This device complies with Part 15 of the  
FCC Rules. Operation is subject to the  
following two conditions: (1) This device  
may not cause harmful interference, and  
(2) this device must accept any interference  
received, including interference that may  
cause undesired operation.  
GB  
 
Using the camcorder  
Do not hold the camcorder by the following  
parts, and also do not hold the camcorder by  
the jack covers.  
Viewfinder (HDR-CXꢄ90E/ Lens hood (HDR-CXꢄ90E/  
CX700E/CX700VE)  
CX700E/CX700VE)  
Black points  
White, red, blue or green points  
Exposing the LCD screen, the viewfinder  
(HDR-CX690E/CX700E/CX700VE) or the lens  
to direct sunlight for long periods of time may  
cause malfunctions.  
Do not aim at the sun. Doing so might cause  
your camcorder to malfunction. Take images  
of the sun only in low light conditions, such as  
at dusk.  
LCD Screen  
Battery pack  
About language setting  
The on-screen displays in each local language  
are used for illustrating the operating  
Built-in USB Cable  
procedures. Change the screen language before  
using the camcorder if necessary (p. 17).  
On recording  
To ensure stable operation of the memory  
card, it is recommended to format the memory  
card with your camcorder before the first  
use. formatting the memory card will erase  
all the data stored on it and the data will be  
irrecoverable. Save your important data on your  
PC etc.  
Before starting to record, test the recording  
function to make sure the image and sound are  
recorded without any problems.  
Compensation for the contents of recordings  
cannot be provided, even if recording or  
playback is not possible due to a malfunction of  
the camcorder, recording media, etc.  
TV color systems differ depending on the  
country/region. To view your recordings on a  
TV, you need a PAL system-based TV.  
Television programs, films, video tapes,  
and other materials may be copyrighted.  
Unauthorized recording of such materials may  
be contrary to the copyright laws.  
The camcorder is not dustproofed, dripproofed  
or waterproofed. See “Precautions” (p. 66).  
Menu items, LCD panel, viewfinder  
(HDR-CX690E/CX700E/CX700VE) and  
lens  
A menu item that is grayed out is not available  
under the current recording or playback  
conditions.  
The LCD screen and viewfinder (HDR-  
CX690E/CX700E/CX700VE) are manufactured  
using extremely high-precision technology, so  
over 99.99% of the pixels are operational for  
effective use. However, there may be some tiny  
black points and/or bright points (white, red,  
blue, or green in color) that appear constantly  
on the LCD screen. These points are normal  
results of the manufacturing process and do not  
affect the recording in any way.  
GB  
Use the camcorder in accordance with local  
regulations.  
Note on the camcorder/battery pack  
temperature  
When the temperature of the camcorder  
or battery pack becomes extremely high or  
extremely low, you may not be able to record  
or play back on the camcorder, due to the  
protection features of the camcorder being  
activated in such situations. In this case, an  
indicator appears on the LCD screen or on the  
viewfinder (HDR-CX690E/CX700E/CX700VE).  
Notes on playing back  
You may not be able to play back normally  
images recorded on your camcorder with other  
devices. Also, you may not be able to play back  
images recorded on other devices with your  
camcorder.  
Standard (STD) image quality movies recorded  
on SD memory cards cannot be played on AV  
equipment of other manufacturers.  
When the camcoder is connected to a  
computer or accessories  
Do not try to format the recording media of the  
camcorder using a computer. If you do so, your  
camcorder may not operate correctly.  
When connecting the camcorder to another  
device with communication cables, be sure to  
insert the connector plug in the correct way.  
Pushing the plug forcibly into the terminal  
will damage the terminal and may result in a  
malfunction of the camcorder.  
When the camcorder is connected to other  
devices through a USB connection and the  
power of the camcorder is turned on, do not  
close the LCD panel. The image data that has  
been recorded may be lost.  
DVD media recorded with HD image  
quality (high definition)  
DVD media recorded with high definition  
image quality (HD) can be played back with  
devices that are compatible with the AVCHD  
standard. You cannot play discs recorded with  
high definition image quality (HD) with DVD  
players/recorders as they are not compatible  
with the AVCHD format. If you insert a disc  
recorded with the AVCHD format (high  
definition image quality (HD)) into a DVD  
player/recorder, you may not be able to eject  
the disc.  
Save all your recorded image data  
To prevent your image data from being lost,  
save all your recorded images on external media  
periodically. To save images on your computer,  
see page 36, and to save images on external  
devices, see page 43.  
The type of discs or media on which the images  
can be saved depend on the [ REC Mode]  
selected when the images were recorded.  
If you cannot record/play back images,  
perform [Format]  
If you repeat recording/deleting images for  
a long time, fragmentation of data occurs on  
the recording media. Images cannot be saved  
or recorded. In such a case, save your images  
on some type of external media first, and  
then perform [Format] by touching  
(MENU) [Setup] [ (Media Settings)]  
[Format] the desired medium (HDR-  
CX560E/CX560VE/CX700E/CX700VE)   
Movies recorded with [50p Quality  
] can  
be saved using external media (p. 45). Movies  
recorded with [Highest Quality  
] can be  
saved on external media or on Blu-ray discs.  
.
Notes on battery pack/AC Adaptor  
Notes on optional accessories  
Be sure to remove the battery pack or the AC  
Adaptor after turning off the camcorder.  
Disconnect the AC Adaptor from the  
camcorder, holding both the camcorder and the  
DC plug.  
We recommend using genuine Sony accessories.  
Genuine Sony accessories may not be available  
in some countries/regions.  
GB  
7
About this manual, illustrations and  
on-screen displays  
Notes on use  
Do not do any of the following. Otherwise, the  
recording media may be damaged, recorded  
images may be impossible to play back or may  
be lost, or other malfunctions could occur.  
ejecting the memory card when the access  
lamp (p. 20) is lit or flashing  
removing the battery pack or AC Adaptor  
from the camcorder, or applying mechanical  
shock or vibration to the camcorder when the  
(Movie)/ (Photo) lamps (p. 22) or the  
access lamp (p. 20) are lit or flashing  
The example images used in this manual for  
illustration purposes are captured using a  
digital still camera, and therefore may appear  
different from images and screen indicators that  
actually appear on your camcorder. And, the  
illustrations of your camcorder and its screen  
indication are exaggerated or simplified for  
understandability.  
In this manual, the internal memory (HDR-  
CX560E/CX560VE/CX700E/CX700VE) and  
the memory card are called “recording media.”  
In this manual, the DVD disc recorded with  
high definition image quality (HD) is called  
AVCHD recording disc.  
When using a shoulder belt (sold separately), do  
not crash the camcorder against an object.  
Design and specifications of your camcorder  
and accessories are subject to change without  
notice.  
Confirm the model name of your  
camcorder  
The model name is shown in this manual when  
there is a difference in specification between  
models. Confirm the model name on the  
bottom of your camcorder.  
The main differences in specification of this  
series are as follows.  
Capacity  
Recording of internal  
USB  
jack  
media  
recording  
media  
Internal  
memory +  
memory  
card  
HDR-  
Output  
only  
CX560E/  
CX560VE*  
64 GB  
HDR-  
Memory  
card  
CX690E**  
Input/  
output  
Internal  
memory +  
memory  
card  
HDR-  
CX700E**/  
CX700VE* **  
96 GB  
The model with * is equipped with GPS.  
The model with ** is equipped with viewfinder.  
GB  
Table of contents  
GB  
9
 
1G0B  
Getting started  
Step 1: Charging the battery pack  
DC IN jack  
Battery pack  
AC Adaptor  
Power cord  
(Mains lead)  
To the wall outlet  
(wall socket)  
/CHG (flash/charge) lamp  
DC plug  
Align the mark on the DC plug  
with that on the DC IN jack.  
You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your  
camcorder.  
Notes  
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.  
Turn off your camcorder by closing the LCD screen after replacing the  
viewfinder (HDR-CX690E/CX700E/CX700VE).  
1
2
3
Attach the battery pack by sliding it in the direction of the arrow until it  
clicks.  
Connect the AC Adaptor and the power cord (mains lead) to your  
camcorder and the wall outlet (wall socket).  
The /CHG (flash/charge) lamp lights up and charging starts. The /CHG (flash/charge)  
lamp turns off when the battery pack is fully charged.  
GB  
11  
     
When the battery is charged, disconnect the AC Adaptor from the DC IN  
jack of your camcorder.  
4
To charge the battery using your computer  
This method is useful when the AC Adaptor is not available.  
Turn off the camcorder and attach the battery pack to the camcorder.  
Connect the camcorder to a running computer using the Built-in USB Cable.  
To the wall outlet  
(wall socket)  
When the battery is fully charged, disconnect the camcorder from the computer (p. 39).  
Notes  
Operation with all computers is not assured.  
If you connect the camcorder to a laptop computer that is not connected to a power source, the battery  
of the laptop computer will continue to use up its charge. Do not leave the camcorder connected to a  
computer in this manner.  
Charging with a personally assembled computer, with a converted computer, or through a USB hub are  
not guaranteed. The camcorder may not function correctly depending on the USB device which is used  
with the computer.  
Tips  
You can charge the battery by connecting the Built-in USB Cable to a wall outlet (wall socket) using an  
AC-U501AD/AC-U50AG USB charger/AC Adaptor (sold separately). You cannot use a Sony CP-AH2R  
or CP-AL portable power supply device (sold separately) to charge the camcorder.  
The USB charger/AC Adaptor may not be available in some countries/regions.  
The /CHG (flash/charge) lamp may not light up when the remaining battery power is too low. In such a  
case, charge the battery using the supplied AC Adaptor.  
Charging time  
Approximate time (min.) required when you fully charge a fully discharged battery pack.  
Charging time  
Battery pack  
AC Adaptor  
155  
Built-in USB Cable*  
NP-FV50 (supplied)  
NP-FV70  
315  
600  
195  
NP-FV100  
390  
1050  
1GB  
   
The charging times shown in the table above are measured when charging the camcorder at a  
temperature of 25 C (77 °F). It is recommended that you charge the battery in a temperature range of 10  
C to 30 C (50 °F to 86 °F).  
* The charging times are measured without using the USB Connection support cable.  
Tips  
See page 63 on recording and playing time.  
When your camcorder is on, you can check the approximate amount of remaining battery power with the  
remaining battery indicator at the upper right on the LCD screen.  
To remove the battery pack  
Close the LCD screen. Slide the BATT (battery) release lever () and remove the battery  
pack ().  
To use a wall outlet (wall socket) as a power source  
Make the same connections as “Step 1: Charging the battery pack” (p. 11). Even if the battery  
pack is attached, the battery pack is not discharged.  
Notes on the battery pack  
When you remove the battery pack or disconnect the AC Adaptor, turn the camcorder off and make sure  
that the  
(Movie)/ (Photo) lamps (p. 22), the access lamp (p. 20) are turned off.  
The /CHG (flash/charge) lamp flashes during charging under the following conditions:  
The battery pack is not attached correctly.  
The battery pack is damaged.  
The temperature of the battery pack is low.  
Remove the battery pack from your camcorder and put it in a warm place.  
The temperature of the battery pack is high.  
Remove the battery pack from your camcorder and put it in a cool place.  
When attaching a video light (sold separately), it is recommended that you use an NP-FV70 or NP-FV100  
battery pack.  
We do not recommend using an NP-FV30, which only allows short recording and playback times, with  
your camcorder.  
In the default setting, the power turns off automatically if you leave your camcorder without any  
operation for about 5 minutes, to save battery power ([A. Shut Off]).  
GB  
1ꢁ  
     
Notes on the AC Adaptor  
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from  
the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder.  
Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.  
Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This  
may cause a malfunction.  
Charging the battery pack abroad  
You can charge the battery pack in any countries/regions using the AC Adaptor supplied with  
your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range.  
Do not use an electronic voltage transformer.  
1GB  
 
Step 2: Turning the power on, and setting the  
date and time  
Open the LCD screen of your camcorder.  
1
Your camcorder is turned on and the lens cover is opened.  
To turn on your camcorder when the LCD screen is open, press POWER.  
MODE lamp  
POWER button  
Select the desired language, then touch [Next].  
2
Touch the button on the  
LCD screen  
Select the desired geographical area with  
/
, then touch [Next].  
3
To set the date and time again, touch  
(MENU) [Setup] [ (Clock Settings)] [Date  
& Time Setting] [Date & Time]. When an item is not on the screen, touch  
/
until  
the item appears.  
GB  
1ꢃ  
     
Set [Summer Time], then touch [Next].  
If you set [Summer Time] to [On], the clock advances 1 hour.  
4
Select the date format, then touch [Next].  
5
6
Select the date and time, touch  
[Next] *.  
/
to set the value, then touch  
* The confirmation screen appears only when you set the clock for the first time.  
The clock starts.  
Notes  
The date and time does not appear during recording, but they are automatically recorded on the  
recording media, and can be displayed during playback. To display the date and time, touch  
(MENU) [Setup] [  
You can turn off the operation beeps by touching  
[Beep] [Off]   
(Playback Settings)] [Data Code] [Date/Time]   
.
(MENU) [Setup] [ (General Settings)]  
.
If the button you touch does not react correctly, calibrate the touch panel.  
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto Area  
ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending on the  
country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area ADJ] to  
[Off] (HDR-CX560VE/CX700VE).  
1GB  
 
To turn off the power  
Close the LCD screen.  
If the viewfinder is pulled out, retract the viewfinder as shown in the illustration below  
(HDR-CX690E/CX700E/CX700VE).  
The (Movie) lamp flashes for a few seconds and the camcorder is turned off.  
Tips  
You can turn off the camcorder also by pressing POWER.  
When [Power On By LCD] is set to [Off], turn off your camcorder by pressing POWER  
(HDR-CX560E/CX560VE).  
On turning the camcorder on or off using the LCD screen or the viewfinder  
(HDR-CX690E/CX700E/CX700VE)  
The power of the camcorder is turned on or off depending on the status of the LCD screen or  
the viewfinder.  
Status  
Viewfinder  
Power of the  
camcorder  
LCD screen  
Open  
Retracted  
Pulled out  
Retracted  
Pulled out  
On  
On  
Off  
On  
Closed  
Notes  
Even if the LCD screen is closed, if the viewfinder is pulled out, the camcorder is not turned off. When  
you turn off the power of the camcorder, make sure that the viewfinder is retracted to the original  
position.  
Changing the language setting  
You can change the on-screen displays to show messages in a specified language.  
Touch  
(MENU) [Setup] [ (General Settings)] [Language Setting] a  
desired language   
.
GB  
17  
   
Step 3: Preparing the recording media  
The recording media that can be used differs depending on your camcorder. The following  
icons are displayed on the screen of your camcorder.  
HDR-CX690E  
Memory card  
HDR-CX560E/CX560VE/  
CX700E/CX700VE  
*
Internal memory  
Memory card  
* In the default setting, both movies and photos are recorded on this recording media. You can perform  
recording, playback and editing operations on the selected medium.  
Tips  
See page 64 for the recordable time of movies.  
See page 65 for the number of recordable photos.  
Selecting recording media (HDR-CX560E/CX560VE/CX700E/CX700VE)  
Touch  
(MENU) [Setup] [ (Media Settings)] [Media Select].  
The [Media Select] screen appears.  
Touch the desired recording medium, then touch  
.
Both movies and photos are recorded on the selected medium.  
To check the recording media settings  
In either movie recording mode or photo recording mode, the media icon of the selected  
recording media is displayed at the top right corner of the screen.  
Recording media icon  
The icon displayed may vary depending on your model.  
1GB  
     
Inserting a memory card  
Notes  
Set the recording medium to [Memory Card] to record movies and/or photos on a memory card  
(HDR-CX560E/CX560VE/CX700E/CX700VE).  
Types of memory card you can use with your camcorder  
SD Speed Class  
Described in this  
manual  
“Memory Stick PRO  
Duo” media (Mark2)  
“Memory Stick PRO  
Duo” media  
“Memory Stick PRO-  
HG Duo” media  
SD memory card  
SDHC memory card  
SDXC memory card  
Class 4 or faster  
SD card  
Operation with all memory cards is not assured.  
“Memory Stick PRO Duo” media, half the size of “Memory Stick, or standard size SD cards can be used  
for this camcorder.  
Do not attach a label or the like on memory card or memory card adaptor. Doing so may cause a  
malfunction.  
“Memory Stick PRO Duo” media of up to 32 GB and SD cards of up to 64 GB have been verified to  
operate with your camcorder.  
Notes  
A MultiMediaCard cannot be used with this camcorder.  
Movies recorded on SDXC memory cards cannot be imported to or played back on computers or AV  
devices not supporting the exFAT* file system by connecting the camcorder to these devices with the  
USB cable. Confirm in advance that the connecting equipment is supporting the exFAT system. If you  
connect an equipment not supporting the exFAT system and the format screen appears, do not perform  
the format. All the data recorded will be lost.  
* The exFAT is a file system that is used for SDXC memory cards.  
GB  
19  
     
Open the cover, and insert the memory card with the notched edge in the  
direction as illustrated until it clicks.  
Close the cover after inserting the memory card.  
Access lamp  
Note the direction of notched corner.  
The [Preparing image database file. Please wait.] screen appears if you insert a new  
memory card. Wait until the screen disappears.  
Close the cover.  
Notes  
If [Failed to create a new Image Database File. It may be possible that there is not enough free space.] is  
displayed, format the memory card.  
Confirm the direction of the memory card. If you forcibly insert the memory card in the wrong direction,  
the memory card, memory card slot, or image data may be damaged.  
Do not open the cover during recording.  
When inserting or ejecting the memory card, be careful so that the memory card does not pop out and  
drop.  
To eject the memory card  
Open the cover and lightly push the memory card in once.  
Copying movies and photos (HDR-CX560E/CX560VE/CX700E/CX700VE)  
HDR-CX560E/CX560VE  
You can copy movies and photos from the internal recording media to the memory card.  
HDR-CX700E/CX700VE  
You can copy movies and photos back and forth between the internal recording media and  
the memory card.  
Touch  
(MENU) [Edit/Copy] [Copy], then follow the instructions that appear  
on the screen.  
G0B  
     
Recording/Playback  
Recording  
In the default setting, movies and photos are recorded on the following media. Movies are  
recorded with high definition image quality (HD).  
HDR-CX690E: Memory card  
HDR-CX560E/CX560VE/CX700E/CX700VE: Internal recording media  
Tips  
To change the recording media, see page 18 (HDR-CX560E/CX560VE/CX700E/CX700VE).  
Fasten the grip belt.  
1
Open the LCD screen of your camcorder.  
2
Your camcorder is turned on and the lens cover is opened.  
GB  
ꢀ1  
     
Recording movies  
(Movie): When recording a movie  
(Photo): When recording a photo  
START/STOP button  
[STBY] [REC]  
MODE button  
Press MODE to turn on the (Movie) lamp.  
Press START/STOP to start recording.  
To stop recording, press START/STOP again.  
To display items on the LCD screen again  
Touch anywhere on the screen except the buttons on the LCD screen so that you can use  
items. You can change the settings using the [Display Setting] menu.  
about 4sec  
after  
To capture smiles  
In the default setting, a photo is automatically recorded when the camcorder detects the smile  
of a person during movie recording (Smile Shutter). When the camcorder detects faces during  
movie recording, image quality is automatically adjusted ([Face Detection]).  
GB  
       
Capturing a photo  
Smile Detection frame  
(Orange)  
Face Detection frame (White)  
Notes  
If you close the LCD screen while recording movies, the camcorder stops recording.  
The maximum continuous recordable time of movies is about 13 hours.  
When a movie file exceeds 2 GB, the next movie file is created automatically.  
It will take several seconds until you can start recording after you turn on the camcorder. You cannot  
operate your camcorder during this time.  
The following states will be indicated if data is still being written onto the recording media after recording  
has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or  
AC Adaptor.  
Access lamp (p. 20) is lit or flashing  
The media icon in the upper right of the LCD screen is flashing  
Tips  
See page 64 on the recordable time of movies.  
You can record photos during movie recording by pressing PHOTO fully (Dual Rec).  
[  
SteadyShot] is set to [Active] in the default setting.  
You can specify the priority face by touching it.  
You can capture photos from recorded movies.  
You can check the recordable time, estimated remaining capacity, etc., by touching  
[Setup] [ (Media Settings)] [Media Info].  
(MENU)   
The LCD screen of your camcorder can display recording images across the entire screen (full pixel  
display). However, this may cause slight trimming of the top, bottom, right and left edges of images when  
played back on a TV which is not compatible with full pixel display. In this case, set [Guide Frame] to  
[On], and record images using the outer frame displayed on the screen as a guide.  
To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (), and  
then adjust the angle ().  
90 degrees (max.)  
90 degrees to the  
180 degrees (max.)  
camcorder  
When you make recording with the viewfinder only, pull out the viewfinder and close the LCD panel.  
If the indicator on the viewfinder appear blurred, adjust the viewfinder lever located on the side of the  
viewfinder (HDR-CX690E/CX700E/CX700VE).  
GB  
ꢀꢁ  
 
Data code during recording  
The recording date, time and condition , and coordinates (HDR-CX560VE/CX700VE) are  
recorded automatically on the recording media. They are not displayed during recording.  
However, you can check them as [Data Code] during playback. To display them, touch  
(MENU) [Setup] [ (Playback Settings)] [Data Code] a desired setting   
.
Shooting photos  
(Movie): When recording a movie  
(Photo): When recording a photo  
Flashes Lights up  
PHOTO button  
MODE button  
When  
disappears, the photo is recorded.  
Press MODE to turn on the (Photo) lamp.  
The LCD screen display switches for photo recording mode.  
Press PHOTO lightly to adjust the focus, then press it fully.  
GB  
   
Tips  
See page 65 on the recordable number of photos.  
To change the image size, touch  
a desired setting   
You cannot record photos while  
Your camcorder flashes automatically when there is insufficient ambient light. The flash does not work in  
the movie recording mode. You can change how your camcorder flashes by (MENU) [Camera/  
(MENU) [Image Quality/Size] [  
Image Size]   
.
is displayed.  
Mic] [ (Flash)] [Flash] a desired setting   
.
If white circular spots appear on photos  
This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are  
accentuated by the camcorder’s flash, they appear as white circular spots.  
To reduce the white circular spots, light the room and shoot the subject without a flash.  
Particles (dust, pollen,  
etc.) in the air  
Acquiring location information using the GPS (HDR-CX560VE/CX700VE)  
When you set [GPS Setting] (p. 58) to [On],  
appears on the LCD screen, and your  
camcorder starts searching for the GPS satellites and acquires the location information.  
Acquiring the location information enables you to use functions such as the Map View.  
The indicator changes according to the strength of GPS signal reception.  
Processing time can be shortened when you load the GPS assist data into the camcorder using the  
supplied software “PMB.” Install “PMB” on your computer (p. 37) and connect the computer to the  
internet. Then connect the camcorder to the computer and the GPS assist data will be automatically  
updated.  
The GPS assist data may not function in the following cases:  
When the GPS assist data are not updated for about 30 days or more  
When the date and time of the camcorder are not correctly set  
When the camcorder is moved for a long distance  
Built-in map is powered by companies as follows; Map of Japan by ZENRIN CO., LTD., other areas  
by NAVTEQ.  
GB  
ꢀꢃ  
 
Selecting the recording mode  
You can change the quality of the image that you record by touching  
(MENU)   
[Image Quality/Size] [  
REC Mode].  
The types of media that images can be saved on will depend on the recording mode  
selected.  
For details on a save operation using the external devices, see page 43.  
Recording mode  
Types of media  
FX  
FH/HQ/LP  
PS*  
On this camcorder  
Internal recording media  
Memory card  
On external devices  
External media (USB storage devices)  
Blu-ray discs  
AVCHD recording discs  
* [PS] can be set only when [  
Frame Rate] is set to [50p].  
GB  
   
Adjusting for shooting  
conditions  
How to use the MANUAL dial  
Recording in dark places  
(NightShot)  
Press MANUAL to switch to manual  
operation mode, and rotate the dial to  
make the adjustment. Pressing MANUAL  
switches the operation mode between  
manual and automatic.  
When you press NIGHTSHOT, appears,  
and you can record images even in total  
darkness.  
Press NIGHTSHOT again to cancel the  
To assign a menu item  
NightShot function.  
Using NightShot in bright places will cause a  
malfunction of your camcorder.  
Press and hold MANUAL for a few seconds  
to display the [Dial Setting] screen. Rotate  
the MANUAL dial to assign an item. You  
can assign [Focus], [Exposure], [IRIS],  
[Shutter Speed], [AE Shift], or [White  
Balance Shift].  
Using a tripod  
Attach a tripod (sold separately) to the  
tripod receptacle using a tripod screw (sold  
separately, the length of the screw must be  
less than 5.5 mm (7/32 in.)).  
Infrared port  
Adjusting focus, etc., manually  
(MANUAL dial)  
Tripod  
receptacle  
It is convenient to make manual  
adjustments using the MANUAL dial,  
by assigning a menu item ([Focus] in the  
default setting) to the MANUAL dial.  
MANUAL button  
MANUAL dial  
GB  
ꢀ7  
         
Playback.on.the.camcorder  
You can enjoy the playback of images with powerful sound through the stereo speakers built  
into the camcorder.  
In the default setting, movies and photos that are recorded on the following recording media  
are played.  
HDR-CX690E: Memory card  
HDR-CX560E/CX560VE/CX700E/CX700VE: Internal recording media  
Tips  
To change the recording media, see page 18 (HDR-CX560E/CX560VE/CX700E/CX700VE).  
The camcorder displays recorded images as an event automatically, based on the date and time. It can also  
display recorded images on the basis of location information (HDR-CX560VE/CX700VE).  
Open the LCD screen of your camcorder.  
1
Your camcorder is turned on and the lens cover is opened.  
Press  
(View Images).  
2
The Event View screen appears after some seconds.  
Touch  
/
to select the desired event ().  
3
[Change View]  
button  
Highlight  
Playback  
button  
To the MENU screen  
Events  
Change View button (HDR-CX560VE/CX700VE)  
GB  
     
/
: To the previous/next event  
Event name  
Change to the movie/photo recording mode  
Time-line bar  
Highlight Playback button*  
Change Event Scale button  
* Appears only when the image quality is set to [  
HD Quality].  
The Event Index screen appears when you touch the event that is displayed on the center.  
You can also choose an event by touching on the time-line bar.  
Touch  
(Change Event Scale) on the bottom right of the screen so that you can change the time  
range of the time-line bar from one and a half years to three months, which changes the number of  
the events that can be displayed on the time-line bar.  
Touch an image you want to view.  
4
Touch to select the image type to be displayed in the index from [  
MOVIE]  
(movies only), [  
photos mixed).  
PHOTO] (photos only), or [  
MOVIE/PHOTO] (movies and  
To go back to the Event View screen  
/
: Displays the previous/next page (Touching and holding the button  
scrolls the index screen.)  
Change to the movie/photo recording mode  
Event title  
Switch Image Type button  
Movie  
Photo  
appears with the movie or photo that was most recently played or recorded. If you touch the  
movie or photo with , you can continue playback from the previous time.  
GB  
ꢀ9  
Operating the camcorder while playing a movie  
You can use the functions shown in the figure below while the camcorder is playing a movie.  
The figure below will be displayed when you select [  
MOVIE/PHOTO] (the default  
setting) or [  
screen.  
MOVIE] by touching the Switch Image Type button on the Event Index  
Volume adjustment  
Delete  
Context  
Next  
To stop*  
Previous  
To fast-forward*  
To pause*/play  
To fast-reverse*  
* These buttons can be used only when the camcorder is playing a movie.  
Notes  
You may not be able to play back the images with other devices than camcorder.  
Tips  
Touching the  
button on the playback screen displays functions you can currently use, and allows you  
to use those functions easily.  
When playback from the selected image reaches the last image, the screen returns to the INDEX screen.  
Touch  
As you repeat touching  
/
during pause to play back movies slowly.  
during playback, movies are played as fast as about 5 times   
/
about 10 times about 30 times about 60 times.  
The recording date, time, and shooting conditions , and coordinates (HDR-CX560VE/CX700VE) are  
recorded automatically during recording. This information is not displayed during recording, but you can  
display it during playback by touching  
Code] a desired setting   
(MENU) [Setup] [  
.
(Playback Settings)] [Data  
In the default setting, a protected demonstration movie is pre-recorded  
(HDR-CX560E/CX560VE/CX700E/CX700VE).  
To adjust the sound volume of movies  
While playing back movies, touch  
adjust with  
/
.
G0B  
   
Viewing photos  
You can use the functions shown in the figure below while you are viewing photos. The figure  
below will be displayed when you select [  
button on the Event Index screen.  
PHOTO] by touching the Switch Image Type  
Delete  
Context  
Next  
Previous  
To start/stop slide show  
Tips  
To repeat Slideshow, touch  
[Slideshow Set].  
Performing Highlight Playback  
Press  
Touch  
/
to select the desired event, then touch [ Highlight].  
Touch [ Scenario Save] on the screen after the Highlight Playback is finished so that you can save  
the Highlight Playback scenario.  
GB  
ꢁ1  
 
Playing images on a TV  
Connection methods and the image  
quality (high definition (HD) or standard  
definition (STD)) viewed on the TV screen  
differ depending on what type of TV is  
connected, and the connectors used.  
List of connection  
Connecting to a high definition TV  
When the recording quality is high  
definition image quality (HD), the movies  
are played back in high definition image  
quality (HD). When the recoding quality is  
standard image quality (STD), the movies  
are played back in standard definition  
image quality (STD).  
Output connectors on the camcorder  
HDMI OUT jack  
Component A/V Cable  
(supplied)  
(Green) Y  
(Blue)PB/CB  
(Red)PR/CR  
A/V Remote  
Connector  
(White)  
(Red)  
HDMI Cable  
(sold separately)  
1
2
3
Switch the input on the TV to the  
connected jack.  
Refer to the instruction manuals of the TV.  
Connect the camcorder to a TV.  
Use the supplied AC Adaptor as the power  
source (p. 13).  
Play a movie or a photo on the  
camcorder (p. 28).  
GB  
     
Connecting to a non-high-definition  
16:9 (wide) or 4:3 TV  
When you connect with component  
A/V cable  
If you connect only component video plugs,  
audio signals are not output. Connect the white  
and red plugs to output audio signals.  
Select the [Component] setting for the  
component input jack you are using. Touch  
(MENU) [Setup]   
When movies are recorded with high  
definition image quality (HD), they are  
played back in standard definition image  
quality (STD). When movies are recoded  
with standard image quality (STD), they are  
played back in standard definition image  
quality (STD).  
[
(Connection)] [Component]   
a desired setting to make the setting.  
When you connect with HDMI cable  
Use an HDMI cable with the HDMI logo.  
Use an HDMI mini connector on one end  
(for the camcorder), and a plug suitable for  
connecting your TV on the other end.  
Copyright-protected images are not output  
from the HDMI OUT jack of your camcorder.  
Some TVs may not function correctly (e.g., no  
sound or image) with this connection.  
Do not connect the camcorder HDMI OUT  
jack to an external device HDMI OUT jack, as  
malfunction may result.  
Component A/V Cable  
(supplied)  
(Green) Y  
(Blue)PB/CB  
(Red)PR/CR  
(White)  
(Red)  
When the connected device is compatible  
with 5.1ch surround sound, high definition  
image quality (HD) movies are output in  
5.1ch surround sound automatically. Standard  
definition image quality (STD) movies are  
converted to 2ch sound.  
A/V connecting cable with  
S VIDEO (sold separately)  
(White)  
(Red)  
To set the aspect ratio according to the  
connected TV (16:9/4:3)  
(Yellow)  
Set [TV Type] to [16:9] or [4:3] according to  
your TV.  
A/V connecting cable  
(supplied)  
(Yellow)  
When you connect with A/V  
connecting cable with S-Video  
(White)  
(Red)  
When the S VIDEO plug (S VIDEO channel)  
is connected, audio signals are not output. To  
output audio signals, connect the white and red  
plugs to the audio input jack of your TV.  
This connection produces higher resolution  
images compared with the A/V connecting  
cable.  
GB  
ꢁꢁ  
   
When your TV is monaural (When your  
TV has only one audio input jack)  
Connect the yellow plug of the A/V connecting  
cable to the video input jack and connect the  
white (left channel) or red (right channel) plug  
to the audio input jack of your TV or VCR.  
On “Photo TV HD”  
This camcorder is compatible with the  
“Photo TV HD” standard. “Photo TV  
HD” allows for highly-detailed, photo-like  
depiction of subtle textures and colors.  
By connecting Sonys Photo TV HD-  
compatible devices using an HDMI cable*  
or the component AV cable**, a whole  
new world of photos can be enjoyed in  
breathtaking full HD quality.  
When connecting to your TV via a VCR  
Connect your camcorder to the LINE IN input  
on the VCR using the A/V connecting cable. Set  
the input selector on the VCR to LINE (VIDEO  
1, VIDEO 2, etc.).  
*
The TV will automatically switch to the  
appropriate mode when displaying photos.  
Notes  
** Setup of the TV will be necessary. Please refer  
to the instructions of your Photo TV HD-  
compatible TV for details.  
When you play back standard definition image  
quality (STD) movies on a 4:3 TV that is not  
compatible with the 16:9 signal, record movies  
with 4:3 aspect ratio. Touch  
[Image Quality/Size] [  
(MENU)   
Wide Mode]   
[4:3]   
.
When the A/V connecting cable is used to  
output movies, movies are output with standard  
definition image quality (STD).  
If your TV/VCR has a 21-pin adaptor  
(EUROCONNECTOR)  
Use a 21-pin adaptor (sold separately) to  
view playback pictures.  
TV/VCR  
Tips  
If you connect your camcorder to the TV using  
more than one type of cable to output images,  
the order of priority of the TV input jacks is as  
follows:  
HDMI component S VIDEO video  
HDMI (High Definition Multimedia Interface)  
is an interface to send both video/audio signals.  
The HDMI OUT jack outputs high quality  
images and digital audio.  
GB  
Advanced operations  
Deleting movies and  
photos  
You can free media space by deleting  
movies and photos from recording media.  
Notes  
You cannot restore images once they are  
deleted. Save important movies and photos in  
advance.  
Do not remove the battery pack or the AC  
Adaptor from your camcorder while deleting  
the images. It may damage the recording media.  
Do not eject the memory card while deleting  
images from the memory card.  
You cannot delete protected movies and photos.  
Undo the protection of the movies and photos  
to delete them, before you try to delete them.  
The demonstration movie on your camcorder is  
protected (HDR-CX560E/CX560VE/CX700E/  
CX700VE).  
If you delete movies/photos that are included  
in saved scenarios, the scenarios will also be  
deleted.  
3
4
Touch and display the mark  
on the movies or photos to be  
deleted.  
Touch and hold the desired thumbnail so  
that you can confirm the image. Touch  
to return to the previous screen.  
Touch  
.
Tips  
If you start playing back an image by selecting it  
from the Event Index screen, you can delete the  
image using on the playback screen.  
To delete all images recorded in the recording  
media, and recover all the recordable space of  
the media, format the media.  
To delete all movies/photos in an event  
at one time  
In step 2, touch [All In Event].  
Reduced-size images which enable you to view  
many images at the same time on an index  
screen are called “thumbnails.”  
1
2
Touch  
Copy] [Delete].  
(MENU) [Edit/  
Touch  
event, then touch  
/
to select the desired  
.
To select and delete movies,  
touch  
[
Touch and hold the desired thumbnail so  
that you can confirm the image. Touch  
to return to the previous screen.  
[Multiple Images]   
MOVIE]/[ PHOTO]/  
Touch  
.
[
MOVIE/PHOTO].  
When [  
/
Setting] is set to  
[
STD Quality],  
appears  
instead of  
.
GB  
ꢁꢃ  
     
Saving movies and photos with a computer  
Useful functions available if you connect the  
camcorder to a computer (Windows)  
The software PMB stored in the CD-ROM (supplied) includes functions that enable you to do  
more with the images recorded with the camcorder.  
View  
Calendar  
Save on a disc  
Upload  
DVD/Blu-ray  
Network services  
Edit  
Joining image files  
Easy uploading when away from home  
With PMB Portable, which is pre-installed on the camcorder, you can play back or upload  
your images to the Web by connecting your camcorder to a computer away from home.  
GB  
     
Preparing a computer  
(Windows)  
Display  
Step 1 Checking the computer  
system  
Minimum 1,024 × 768 dots  
Others  
OS*1  
USB port (this must be provided as standard,  
Hi-Speed USB (USB 2.0 compatible)), Blu-  
ray disc/DVD burner (CD-ROM drive is  
necessary for installation) Either NTFS or  
exFAT file system is recommended as the  
hard disk file system.  
Microsoft Windows XP SP3*2/Windows Vista  
SP2*3/Windows 7  
CPU*4  
Intel Core Duo 1.66 GHz or faster, or Intel  
Core 2 Duo 1.66 GHz or faster (Intel Core  
2 Duo 2.26 GHz or faster is required when  
processing FX or FH movies, and Intel Core  
2 Duo 2.40 GHz or faster is required when  
processing PS movies.)  
*1 Standard installation is required. Operation is  
not assured if the OS has been upgraded or in a  
multi-boot environment.  
*2 64-bit editions and Starter (Edition) are not  
supported. Windows Image Mastering API  
(IMAPI) Ver.2.0 or newer is required to use disc  
creation function, etc.  
However, Intel Pentium III 1 GHz or faster is  
sufficient for the following operations:  
Importing the movies and photos to the  
computer  
*3 Starter (Edition) is not supported.  
*4 Faster processor is recommended.  
One Touch Disc Burn  
Creating a Blu-ray disc/AVCHD recording  
disc/DVD-video (Intel Core Duo 1.66 GHz  
or faster is required when creating a DVD  
video by converting high definition image  
quality (HD) to standard definition image  
quality (STD).)  
Notes  
Operation with all computer environments is  
not assured.  
When using a Macintosh  
Copying a disc  
The supplied software “PMB” is not  
supported by Macintosh computers. To  
import the movies and photos to the  
computer, please contact Apple Inc.  
Processing only the movies with standard  
definition image quality (STD)  
Application  
DirectX 9.0c or later (This product is based  
on DirectX technology. It is necessary to have  
DirectX installed.)  
Memory  
Step 2 Installing the supplied  
software “PMB”  
For Windows XP: 512 MB or more (1 GB or  
more is recommended.)  
However, 256 MB or more is sufficient for  
processing only the movies with standard  
definition image quality (STD).  
For Windows Vista/Windows 7: 1 GB or  
more  
Install “PMB” before connecting your  
camcorder to a computer.  
Notes  
If a version of “PMB” under 5.0.00 has been  
installed on your computer, you may be unable  
to use some functions of those “PMB” when  
installing the “PMB” from the supplied CD-  
ROM. Also, “PMB Launcher” is installed from  
the supplied CD-ROM and you can start “PMB”  
or other software by using the “PMB Launcher.”  
Hard disk  
Disk volume required for installation:  
Approximately 500 MB (10 GB or more  
may be necessary when creating AVCHD  
recording discs. 50 GB maximum may be  
necessary when creating Blu-ray discs.)  
GB  
ꢁ7  
     
Double-click the “PMB Launcher” short-cut  
icon on the computer screen to start “PMB  
Launcher.”  
Follow the instructions that  
appear on the computer screen  
to continue the installation.  
You may be required to install some  
other applications included on the disc at  
the same time. If the installation display  
appears, follow the instructions that appear  
on the screen.  
When you are required to restart the  
computer, follow the instructions that  
appear on the screen and restart it.  
Connect the camcorder to the computer  
when you are instructed to do so.  
Confirm that your camcorder is  
not connected to the computer.  
Turn on the computer.  
Log on as an Administrator for  
installation.  
Close all applications running on the  
computer before installing the software.  
Place the supplied CD-ROM in  
the disc drive of your computer.  
Connect the camcorder to the  
computer using the Built-in USB  
Cable, then touch [USB Connect]  
on the LCD screen of the  
camcorder.  
The installation screen appears.  
If the screen does not appear, click  
[Start] [Computer] (in Windows  
XP, [My Computer]), then double-click  
[SONYPMB (E:)] (CD-ROM)*.  
* Drive names (such as (E:)) may vary  
depending on the computer.  
Click [Install].  
Select the country or region.  
When the installation is  
completed, remove the CD-ROM  
from the computer.  
Select the language for the  
application to be installed, then  
proceed to the next screen.  
Click (PMB icon) that appears on the  
desktop of the computer to start up the  
software.  
Read the terms of the license  
agreement carefully. If you agree  
to the terms, change to , and  
then click [Next] [Install].  
GB  
Do not insert AVCHD recording discs that have  
been created using the “PMB” software to DVD  
players or recorders, as these devices do not  
support the AVCHD standard. If you do, you  
may not be able to remove the disc from these  
devices.  
This camcorder captures high definition footage  
in the AVCHD format. Using the enclosed  
PC software, high definition footage can be  
copied onto DVD media. However, DVD media  
containing AVCHD footage should not be used  
with DVD based players or recorders, as the  
DVD player/recorder may fail to eject the media  
and may erase its contents without warning.  
When you access the camcorder from the  
computer, use the supplied software “PMB” or  
the pre-installed software “PMB Portable.” Do  
not modify the files or folders on the camcorder  
from the computer. The image files may be  
damaged or may not be played back.  
Operation is not guaranteed, if you operate the  
data on the camcorder from the computer.  
The camcorder automatically divides an image  
file that exceeds 2 GB or larger and saves the  
parts as separate files. All image files may be  
shown as separate files on a computer, however,  
the files will be handled properly by the import  
function of the camcorder or the “PMB”  
software, and also by the playback function of  
the “PMB Portable” software.  
Notes  
To create discs or use other functions on  
Windows XP, Image Mastering API v2.0 for  
Windows XP should be installed. If Image  
Mastering API v2.0 for Windows XP has not  
been installed yet, select it from required  
programs on the installation screen and install  
it following the procedures displayed. (The  
computer must be connected to the internet  
for the installation.) You may install Image  
Mastering API v2.0 for Windows XP in  
response to the message displayed when you try  
to start those functions.  
Operation is not guaranteed if you read or write  
video data from or to the camcorder using  
software other than the supplied “PMB.” For the  
information on the compatibility of the software  
you are using, consult the manufacturer of the  
software.  
To disconnect your camcorder from the  
computer  
Click the  
icon at the bottom right of the  
desktop of the computer [Safely remove  
USB Mass Storage Device].  
Use the supplied “PMB” software when you  
import long movies or edited images from  
the camcorder to a computer. If you use other  
software, the images may not be imported  
correctly.  
When you delete image files, follow the steps  
on page 35.  
You can create a Blu-ray disc by using a  
computer with a Blu-ray disc burner. Install the  
BD Add-on Software for “PMB.”  
Touch [Cancel] [Yes] on the camcorder  
screen.  
Disconnect the USB cable.  
If you are using Windows 7, the  
icon may  
not appear on the desktop of the computer. In  
this case, you can disconnect the camcorder  
from your computer without following the  
procedures described above.  
Notes  
Do not format the internal recording media of  
the camcorder using a computer. If you do this,  
the camcorder will not operate correctly.  
GB  
ꢁ9  
 
Starting PMB (Picture  
Motion Browser)  
Uploading images to a  
network service  
The application software “PMB Portable”  
is pre-installed in the camcorder. You can  
enjoy the following functions using the  
“PMB Portable.”  
Uploading images to network services such as  
blogs with ease  
1
Double-click the “PMBshort-cut  
icon on the computer screen.  
Uploading by a network connected computer  
while away from home  
Register network services (such as blogs) to use  
frequently  
Click the [Help] button on the upper right  
of the computer screen after the “PMB  
Portable” software starts up, and then you  
can view the details on how to use the  
software.  
The PMB software starts up.  
2
Double-click the “PMB Help”  
short-cut icon on the computer  
screen to see how to use “PMB.”  
Starting up “PMB Portable”  
Turn on your camcorder, then  
connect the camcorder to the  
computer using the Built-in USB  
Cable.  
Notes  
If the icon is not displayed on the computer  
screen, click [Start] [All Programs]   
[
PMB] the desired item.  
Tips  
Double-click “PMB Launcher” on the desktop  
of the computer. This allows you to start the  
desired function (application) by selecting one  
from a list of “PMB” functions.  
The [USB Select] screen appears on the  
camcorder screen.  
G0B  
     
If the AutoPlay wizard does not appear when  
you are using Windows XP or Windows Vista,  
click [Start] [Computer] (in Windows XP,  
[My Computer]) [PMBPORTABLE], then  
double click [PMBP_Win.exe].  
If the “Device Stage” does not start up when you  
are using Windows 7, click [Start], then double  
click the camera icon for this camcorder the  
medium icon on which the desired images are  
stored [APPLICATION] [PMBP_MTP.  
exe].  
If you are using Windows 7, the Device Stage  
start-up window (which does not contain the  
information about the specific device) may  
appear, depending on the computer settings.  
In such a case, follow the instructions on the  
screen and download the latest information  
about the system.  
Touch [USB Connect] on the  
camcorder screen.  
When using Windows 7: The Device  
Stage* window opens.  
When using Windows XP/Windows  
Vista: The AutoPlay wizard is  
displayed.  
If the[USB Select] screen does not appear,  
touch  
(MENU) [Setup]   
[
(Connection)] [USB Connect].  
* “Device Stage” is a menu of Windows 7,  
that is used to manage devices (camcorder,  
camera, etc.) that are connected to the  
computer.  
If you are using Windows 7, the [USB Connect  
Setting] (USB transfer mode) will be changed to  
[Mass Storage] automatically when you start up  
“PMB Portable.”  
When you upload images via Internet, as in the  
case of with the camcorder, cache files may be  
stored in the computer you are using depending  
on the service provider to upload the image to.  
If a problem occurs to “PMB Portable” or if you  
wrongly delete the software, you can download  
the “PMB Portable” installer from the Web to  
repair.  
Click “PMB Portable.”  
The license agreement screen appears.  
Select the desired language and  
click [OK].  
The area select screen appears.  
Select [Region] and [Country/  
Area] and click [OK].  
The license agreement screen appears.  
Read the agreement well and  
click [I Agree].  
“PMB Portable” starts up.  
Notes  
When using “PMB Portable,” make sure to  
connect the camcorder to the network.  
Set [USB LUN Setting] to [Multi] (p. 57).  
If the “PMB Portable” does not start up, set  
[USB Connect Setting] to [Mass Storage] (p. 57)  
and try reconnecting.  
GB  
ꢂ1  
Notes on “PMB Portable”  
You can download the URLs of some  
websites from a server administered by  
Sony (hereinafter referred to as the “Sony  
server”) using “PMB Portable.”  
You must agree to the following in order to  
utilize the image uploading service (herein  
after referred to as “the service”) provided  
by various websites including those using  
“PMB Portable.”  
Depending on the website, registration  
and fees may be required for use of the  
service. Use the service in accordance  
with the terms stipulated by the website.  
The service can be suspended or altered  
without notice by the website organizer.  
In these, as well as other cases, Sony  
shall not be liable in any way for any loss,  
damages or trouble between you and a  
third party which arose from the use of  
the service.  
You will be redirected to the websites by  
the Sony server. However, you may not  
be able to access the websites for some  
reason such as server maintenance.  
If Sony decides to terminate server  
operation, it will be announced in  
advance on Sony’s website, etc.  
Such information as URL address of  
the site you are redirected to from the  
Sony server may be recorded in order  
to improve products and services Sony  
offers in the future. However, personal  
information will not be recorded.  
GB  
Saving images with an external device  
Selecting a method for saving images with an  
external device  
You can save high definition image quality (HD) movies using an external device. Select the  
method to be used according to the device.  
External devices  
Connecting cable  
Page  
External media device  
Saving images on an external  
media device with high  
USB Adapter cable  
VMC-UAM1 (sold  
separately)  
definition image quality (HD).  
DVDirect Express DVD writer  
Saving images on a DVD disc  
with high definition image  
quality (HD).  
Built-in USB cable of  
the DVDirect Express  
DVD writer other than  
DVDirect Express  
Saving images on a DVD disc  
with high definition image  
quality (HD) or with standard  
definition image quality (STD).  
Built-in USB Cable  
Hard disk recorder, etc.  
Saving images on a DVD disc  
with standard definition image  
quality (STD).  
A/V connecting cable  
(supplied)  
Movies that are recorded with standard definition image quality (STD)  
Use the A/V connecting cable to connect the camcorder to an external device in which images  
are saved.  
Notes  
The AVCHD recording disc can be played back only on AVCHD format compatible devices.  
Discs with high definition image quality (HD) images recorded should not be used in DVD players/  
recorders. Because DVD players/recorders are not compatible with the AVCHD format, DVD players/  
recorders may fail to eject the disc.  
Delete the demonstration movie when copying or creating discs. If it is not deleted, the camcorder may  
not operate correctly. However, you cannot recover the demonstration movie once you delete it.  
GB  
ꢂꢁ  
     
The types of media on which images are saved  
The devices on which the created disc can be played back  
DVD disc with high definition image quality (HD)  
AVCHD format playback devices, such as a Sony Blu-ray disc player or a PlayStation3.  
DVD disc with standard definition image quality (STD)  
Ordinary DVD playback devices, such as a DVD player.  
Notes  
Always maintain your PlayStation3 to use the latest version of the PlayStation3 system software.  
The PlayStation3 may not be available in some countries/regions.  
GB  
Saving images on an  
external media device  
important data has not previously been saved  
on the external media device before you format  
it using the camcorder.  
Operation is not assured with every device  
satisfying requirements for operating.  
For details on available external media devices,  
go to the Sony support website in your  
country/region.  
You can save movies and photos on an  
external media device (USB storage  
devices), such as an external hard disk  
drive. You can also play back images on the  
camcorder or another playback device.  
Notes  
For this operation, you need the USB Adaptor  
Cable VMC-UAM1 (sold separately).  
The USB Adaptor Cable VMC-UAM1 may not  
be available in some countries/regions.  
Connect your camcorder to the wall outlet (wall  
socket) using the supplied AC Adaptor (p. 13).  
Refer to the instruction manual supplied with  
the external media device.  
1
2
Connect the AC Adaptor and the  
power cord (mains lead) to the  
DC IN jack of your camcorder and  
the wall outlet (wall socket).  
Tips  
If the external medium device  
has the AC power cable, connect  
it to the wall outlet (wall socket).  
You can import images saved on the external  
media device to your computer by using the  
supplied software “PMB.”  
Functions available after saving images  
on an external media device  
playback of images through the camcorder  
(p. 47)  
3
4
Connect the USB Adaptor Cable  
to the external media device.  
importing images to “PMB”  
Connect the USB Adaptor Cable  
to the (USB) jack of your  
camcorder.  
Devices that cannot be used as an  
external media device  
You cannot use the following devices as an  
external media device.  
media devices with a capacity exceeding 2 TB  
ordinary disc drive such as CD or DVD drive  
media devices connected via a USB hub  
media devices with built-in USB hub  
card reader  
Make sure not to disconnect the USB  
cable while [Preparing image database  
file. Please wait.] is displayed on the  
LCD screen. If [Repair Img. DB F.] is  
displayed on the camcorder screen,  
touch  
.
Notes  
You may not be able to use external media  
devices with a code function.  
The FAT file system is available for your  
camcorder. If the storage medium of the  
external device was formatted for the NTFS file  
system, etc., format the external media device  
using the camcorder before use. The format  
screen appears when an external media device  
is connected to your camcorder. Make sure that  
GB  
ꢂꢃ  
     
When connecting an external media  
device  
The images saved in the external media  
device are displayed on the LCD screen.  
Images saved on the connected external  
media device appear on the LCD screen.  
When an external media device is  
connected, the USB icon will appear on the  
Event View screen, etc.  
USB Adaptor  
Cable  
VMC-UAM1  
(sold separately)  
You cannot use the Built-in USB Cable for  
this type of connection.  
5
6
Connect the external media  
device and touch [Copy.] on the  
camcorder screen.  
You can make menu settings of the external  
media device such as deleting images.  
Touch  
(MENU) [Edit/Copy] on  
Event View.  
HDR-CX690E:  
Movies and photos that are stored  
in the memory card (inserted in the  
camcorder), and that have not yet been  
saved on to external media device  
can be saved on the connected media  
device at this time.  
To disconnect the external media  
device  
Touch  
while the camcorder is in  
the playback standby mode ([Event  
View] or Event Index is displayed) of the  
external media device.  
HDR-CX560E/CX560VE/CX700E/  
CX700VE:  
Disconnect the USB Adaptor Cable.  
Movies and photos that are stored on  
one of the camcorder’s recording media  
selected in [Media Select], and that  
have not yet been saved on external  
media device can be saved on the  
connected media device at this time.  
This operation is available only when there  
are newly recorded images.  
Notes  
The number of scenes you can save on the  
external media device are as follows. However,  
even if the external media device has free space,  
you cannot save scenes exceeding the following  
number.  
High definition image quality (HD) movies:  
Max. 3,999  
Standard definition image quality (STD)  
movies: Max. 9,999  
Photos: Max. 40,000  
After operation is completed,  
The number of scenes may be smaller  
depending on the type of images recorded.  
touch  
on the camcorder  
screen.  
GB  
If you select [All In Event], select the event  
Saving desired movies and photos  
to copy with  
/
. You cannot  
select multiple events.  
You can save desired images in the  
camcorder to the external media device.  
Touch  
on the camcorder screen.  
Connect the camcorder to the  
external media device and touch  
[Play without copying.].  
Event View of the external medium is  
displayed.  
Playing back images in the external  
media device on the camcorder  
Touch  
Copy] [Copy] .  
(MENU) [Edit/  
Connect the camcorder to the  
external media device and touch  
[Play without copying.].  
Follow the instructions that  
appear on the screen to select  
the recording media (HDR-  
CX560E/CX560VE/CX700E/  
CX700VE), image selection  
methods and type of the image.  
Event View of the external media device  
is displayed.  
Select the image you want to  
view and play back the image  
You can also view images on a TV  
connected to your camcorder (p. 32).  
You can play back the high definition  
image quality (HD) movies on your  
computer using [Player for AVCHD].  
Start [Player for AVCHD], and select the  
drive where the external media device is  
connected with [Settings].  
You cannot copy images from an  
external media device to the internal  
recording medium on the camcorder.  
When you selected [Multiple  
Images], touch the image to be  
saved.  
appears.  
To perform [Direct Copy] manually  
You can perform [Direct Copy] manually  
while the camcorder is connected to an  
external media device.  
Touch  
(MENU) [Edit/Copy]  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
[Direct Copy] on the [Event View]  
screen of the external media device.  
GB  
ꢂ7  
 
Creating a disc with  
the DVD writer,  
DVDirect Express  
Touch [Copy images that have not been  
copied.].  
Touch  
You can create a disc or play back the  
images on a created disc by using the DVD  
writer, DVDirect Express (sold separately).  
Refer also to the instruction manual  
supplied with the DVD writer.  
.
Notes  
If your camcorder does not recognize the  
external media device, try the following  
operations.  
Reconnect the USB Adaptor Cable to your  
camcorder.  
If the external media device has the AC power  
cord (mains lead), connect it to the wall outlet  
(wall socket).  
Notes  
Connect your camcorder to the wall outlet (wall  
socket) using the supplied AC Adaptor for this  
operation (p. 13).  
DVDirect Express is referred to as “DVD  
writer” in this section.  
Discs that can be used  
12 cm DVD-R  
12 cm DVD+R  
The device does not support two-layered  
discs.  
1
2
Connect the AC Adaptor and the  
power cord (mains lead) to the  
DC IN jack of your camcorder  
and the wall outlet (wall socket)  
Turn on your camcorder, and  
connect the DVD writer to the  
(USB) jack of your camcorder  
with the USB cable of the DVD  
writer.  
You cannot use the Built-in USB Cable  
for this type of connection.  
GB  
     
3
4
Insert an unused disc into the  
DVD writer, and close the disc  
tray.  
6
Touch  
USB cable.  
, then disconnect the  
Tips  
Press  
(DISC BURN) on the DVD  
If the total memory size of movies to be burnt  
by the DISC BURN operation exceeds that of  
the disc, disc creation stops when the limit is  
reached. The last movie on the disc may be  
cut off.  
writer.  
HDR-CX690E  
Movies that are stored in the memory  
card (inserted in the camcorder), and that  
have not yet been saved on any disc can be  
saved on the disc at this time.  
Performing [DISC BURN OPTION]  
HDR-CX560E/CX560VE/CX700E/  
CX700VE  
Perform this operation in the following  
Movies that are stored on one of the  
camcorder’s recording media selected in  
[Media Select], and that have not yet been  
saved on any discs can be saved on the disc  
at this time.  
cases:  
When copying a desired image  
When creating multiple copies of the same  
disc  
When there are unsaved high definition  
(HD) and standard definition (STD)  
image quality movies, they will be saved  
on individual discs according to the image  
quality.  
Connect the camcorder to the  
DVD writer and touch [DISC  
BURN OPTION].  
If the files you want to copy do not fit  
onto one disc, replace the disc in the DVD  
writer with an unused one and repeat the  
operation.  
Select the recording media  
containing the movie(s) you want  
to save (HDR-CX560E/CX560VE/  
CX700E/CX700VE) and touch  
[Next].  
5
After the operation is completed,  
touch  
(the  
tray opens) remove the  
disc touch  
on the  
camcorder screen.  
GB  
ꢂ9  
Play the created disc to make sure copying was  
performed correctly before deleting the movies  
on your camcorder.  
If [Failed.] or [DISC BURN failed.] appears on  
the screen, insert another disc into the DVD  
writer and perform the DISC BURN operation  
again.  
Touch the movie you want to  
burn on the disc.  
appears.  
Remaining Disc capacity  
Tips  
Disc creation time to copy movies to the limit  
of the disc is about 20 to 60 minutes. It may take  
more time depending on the recording mode or  
the number of scenes.  
Touch and hold the desired thumbnail so  
that you can confirm the image. Touch  
to return to the previous screen.  
Playing back a disc on the DVD  
writer  
Touch  
camcorder screen.  
on the  
Connect the AC Adaptor and the  
power cord (mains lead) to the  
DC IN jack of your camcorder  
and the wall outlet (wall socket)  
To create another disc of the same  
contents, insert a new disc and touch  
[CREATE SAME DISC].  
After the operation is completed,  
Turn on your camcorder, and  
connect the DVD writer to the  
(USB) jack of your camcorder  
with the USB cable of the DVD  
writer.  
touch [Exit.]   
on the  
camcorder screen.  
Disconnect the USB cable from  
your camcorder.  
Notes  
Do not do any of the following when creating  
a disc.  
Turn off the camcorder  
Disconnect the USB cable or the AC Adaptor  
Subject the camcorder to mechanical shock  
or vibration  
You can play back movies on the TV  
screen by connecting the camcorder to a  
TV (p. 32).  
Eject the memory card from the camcorder  
G0B  
Creating a high  
definition image  
quality (HD) disc with a  
DVD writer, etc., other  
than DVDirect Express  
Insert a created disc into the DVD  
writer.  
The movies on the disc appear on the  
index screen on the camcorder.  
Use the USB cable to connect your  
camcorder to a disc creation device, which  
is compatible with high definition image  
quality (HD) movies, such as a Sony DVD  
writer. Refer also to the instruction manuals  
supplied with the device to be connected.  
Press the play button on the DVD  
writer.  
You can also operate by the camcorder  
screen.  
Notes  
Connect your camcorder to the wall outlet (wall  
socket) using the supplied AC Adaptor for this  
operation (p. 13).  
After the operation is completed,  
touch  
on the camcorder  
Sony DVD writer may not be available in some  
countries/regions.  
screen and remove the disc when  
the tray is open.  
1
2
Connect the AC Adaptor and the  
power cord (mains lead) to the  
DC IN jack of your camcorder  
and the wall outlet (wall socket)  
Touch  
USB cable.  
and disconnect the  
Turn on your camcorder, and  
connect a DVD writer, etc. to your  
camcorder with the Built-in USB  
Cable.  
The [USB Select] screen appears on the  
camcorder screen.  
GB  
ꢃ1  
   
Creating a standard  
definition image  
quality (STD) disc with  
a recorder, etc.  
If the [USB Select] screen does not appear,  
touch (MENU) [Setup]   
(Connection)] [USB Connect].  
[
You can copy images played back on your  
camcorder on a disc or video cassette,  
by connecting your camcorder to a disc  
recorder, a Sony DVD writer, etc., other  
than DVDirect Express, with the A/V  
connecting cable. Connect the device in  
either way of or . Refer also to the  
instruction manuals supplied with the  
devices to be connected.  
3
4
Touch [USB Connect] on the  
camcorder screen.  
The displayed recording media differ  
depending on the model.  
Record movies on the connected  
device.  
For details, refer to the instruction  
manuals supplied with the device to be  
connected.  
Notes  
Connect your camcorder to the wall outlet (wall  
socket) using the supplied AC Adaptor for this  
operation (p. 13).  
5
6
After the operation is completed,  
Sony DVD writer may not be available in some  
countries/regions.  
High definition image quality (HD) movies  
will be copied with standard definition image  
quality (STD).  
touch  
on the  
camcorder screen.  
Disconnect the USB cable.  
GB  
   
A/V Remote Connector  
2
Connect your camcorder to the  
recording device (a disc recorder,  
etc.) with the A/V connecting  
cable (supplied) or an A/V  
connecting cable with S VIDEO  
(sold separately).  
Connect your camcorder to the input jacks  
of the recording device.  
Input  
S VIDEO  
3
4
Start playback on your  
camcorder, and record it on the  
recording device.  
Refer to the instruction manuals supplied  
with your recording device for details.  
VIDEO  
(Yellow)  
(White)  
AUDIO  
(red)  
When dubbing is finished, stop  
the recording device, and then  
your camcorder.  
(Yellow)  
Signal flow  
Notes  
A/V connecting cable (supplied)  
Since copying is performed via analog data  
transfer, the image quality may deteriorate.  
You cannot copy images to recorders connected  
with an HDMI cable.  
To copy date/time information, camera data,  
and coordinates (HDR-CX560VE/CX700VE),  
A/V connecting cable with S VIDEO  
(sold separately)  
By using this cable, higher quality  
images can be produced than with an  
A/V connecting cable. Connect the white  
and red plug (left/right audio) and the S  
VIDEO plug (S VIDEO channel) of the  
A/V connecting cable with an S VIDEO  
cable. If you connect the S VIDEO plug  
only, you will hear no sound. The yellow  
plug (video) connection is not necessary.  
touch  
(Playback Settings)] [Data Code]   
a desired setting   
When the screen size of display devices (TV,  
etc.) is 4:3, touch (MENU) [Setup]  
[ (Connection)] [TV Type] [4:3]  
(MENU) [Setup] [  
.
.
When you connect a monaural device, connect  
the yellow plug of the A/V connecting cable  
to the video input jack, and the white (left  
channel) or the red (right channel) plug to the  
audio input jack on the device.  
1
Insert the recording media in the  
recording device.  
If your recording device has an input  
selector, set it to the input mode.  
GB  
ꢃꢁ  
 
Customizing your camcorder  
Using menus  
You can enjoy using your camcorder more by making good use of menu operations.  
The camcorder has various menu items under each of 6 menu categories.  
Shooting Mode (Items for selecting a shooting mode) p. 55  
Camera/Mic (Items for customized shooting) p. 55  
Image Quality/Size (Items for setting up image quality or size) p. 56  
Playback Function (Items for playback) p. 56  
Edit/Copy (Items for editing) p. 57  
Setup (Other setup items) p. 57  
Operating menus  
Follow the procedures explained below to set the menu items.  
The [Camera/Mic] and [Setup] menus have sub-categories. Touch the sub-category icon, and  
the screen changes to other sub-category menus.  
Grayed out menu items or settings are not available.  
Notes  
You may not be able to set some menu items, depending on the recording or playback conditions.  
Touch  
to finish setting the menu or to return to the previous menu screen.  
GB  
   
Menu lists  
Shooting Mode  
Movie .......................................... Records movies.  
Photo........................................... Shoots photos.  
Smth Slw REC........................... Records fast moving subjects in slow-motion.  
Golf Shot.................................... Divides two seconds of fast movement into frames which are then  
recorded as a movie and photos.  
Camera/Mic  
(Manual Settings)  
White Balance................. Adjusts the color balance to the brightness of the recording environment.  
Spot Meter/Fcs............... Adjusts the brightness and focus for the selected subject simultaneously.  
Spot Meter....................... Adjusts the brightness of images to a subject you touch on the screen.  
Spot Focus....................... Focuses on a subject you touch on the screen.  
Exposure........................... Adjusts the brightness of movies and photos.  
Focus.................................. Focuses manually.  
IRIS...................................... Sharpens the subject with its background blurred or sharpens the whole  
image.  
Shutter Speed................. Adjusts Shutter Speed. When you shoot a moving subject at a higher  
shutter speed, it appears as if frozen on the image. At a lower shutter  
speed, the subject appears as if it is flowing.  
AE Shift.............................. Adjusts the exposure. Touch  
if the subject is white or the backlight  
is bright, or touch  
if the subject is black or the light is dim.  
White Balance Shift ...... Adjusts the white balance.  
Low Lux............................. Records bright color images in the dim.  
(Camera Settings)  
Scene Selection ............. Selects an appropriate recording setting according to the type of scene,  
such as night view or beach.  
Cinematone............. Adjusts the color of the movie to resemble the atmosphere of films when  
recording.  
Fader.......................... Fades scenes in or out.  
Self-Timer................. Sets the self-timer when your camcorder is in photo recording mode.  
Tele Macro........................ Shoots a subject in focus with the background out of focus.  
SteadyShot.............. Sets the SteadyShot function when recording movies.  
SteadyShot.............. Sets the SteadyShot function when shooting photos.  
Digital Zoom................... Sets the maximum zoom level of the digital zoom that exceeds the zoom  
level of the zoom.  
Conversion Lens ............ Sets the type of an attached conversion lens (sold separately). Optimizes  
the SteadyShot function and focus according to the attached lens.  
Auto Back Light.............. Adjusts the exposure for backlit subjects automatically.  
Dial Setting...................... Assigns a function to the MANUAL dial.  
NIGHTSHOT Light.......... Emits infrared light when using NightShot.  
GB  
ꢃꢃ  
       
(Face)  
Face Detection............... Adjusts the image quality of the face(s) automatically.  
Smile Shutter.................. Automatically takes a shot whenever a smile is detected.  
Smile Sensitivity ............ Sets the smile detection sensitivity using the smile shutter function.  
(Flash)  
Flash................................... Sets how the flash is activated.  
Flash Level ....................... Sets the brightness of flash.  
Red Eye Reduction........ Prevents redeye when shooting with flash.  
(Microphone)  
Blt-in Zoom Mic ............. Records movies with vivid sound appropriate to the zoom position.  
Wind Noise Reduct....... Reduces the wind noise.  
Audio Mode .................... Sets the recording sound format (5.1ch surround/2ch stereo).  
Micref Level..................... Sets the microphone level.  
(Shooting Assist)  
Expanded Focus*1......... Magnifies the image that appears at the center of the screen by about 2.0  
times.  
Guide Frame.................... Displays the frame to make sure the subject is horizontal or vertical.  
Display Setting............... Sets the duration that icons or indicators are displayed on the LCD screen.  
Zebra*1 .............................. Displays a zebra pattern as a guide for adjusting brightness.  
Peaking*1.......................... Displays an image on the LCD screen with its outlines enhanced.  
Audio Level Display...... Displays the audio level meter on the LCD screen.  
Image Quality/Size  
REC Mode .......................... Sets the mode to record movies. When recording fast moving subject, a  
high image quality is recommended.  
Frame Rate ........................ Sets the frame rate to record movies.  
/
Setting................. Sets image quality for recording, playback, or editing movies.  
Wide Mode........................ Sets the horizontal to vertical ratio when recording movies with standard  
definition image quality (STD).  
x.v.Color.............................. Records wider range of colors.  
Image Size......................... Sets the photo size.  
Playback Function  
Event View................................. Shows the Event View display.  
Map View*2................................ Shows the Map View display.  
Highlight Movie ...................... Starts Highlight Playback.  
Scenario............................... Starts playing Highlight Scenario that has been saved.  
GB  
       
Edit/Copy  
Delete.......................................... Deletes movies or photos.  
Protect ........................................ Protects movies or photos to avoid deleting.  
Copy*3......................................... HDR-CX560E/CX560VE:  
Copies images from the selected internal recording medium to the  
inserted memory card.  
HDR-CX700E/CX700VE:  
Copies images back and forth between the selected internal recording  
medium and the inserted memory card.  
Direct Copy ............................... Copies images stored on the internal recording medium or on a memory  
card to some type of external media.  
Setup  
(Media Settings)  
Media Select*3 ................ Sets the type of media to be used for recording movies or photos (p. 18).  
Media Info........................ Displays information on the recording media, such as free space.  
Format............................... Deletes all data on the internal recording media or a memory card.  
Repair Img. DB F............. Repairs the image database file on the internal recording media or a  
memory card (p. 62).  
File Number..................... Sets how to assign the file number.  
(Playback Settings)  
Data Code........................ Sets the date and time.  
Volume.............................. Adjusts the volume of playback sound (p. 30).  
Download Music*1 ........ Download music files that can be played with Highlight Playback.  
Empty Music*1................ Deletes music files.  
(Connection)  
TV Type ............................. Converts the signal depending on the TV connected (p. 32).  
Component..................... Select this option when you connect your camcorder to a TV with the  
component input jack (p. 33).  
HDMI Resolution ........... Selects the output image resolution when connecting your camcorder to a  
TV with an HDMI cable (sold separately).  
CTRL FOR HDMI ............. Sets whether or not the TVs Remote Commander is to be used when  
the camcorder is connected to a “BRAVIASync compatible TV with the  
HDMI cable (sold separately).  
USB Connect................... Selects which type of media on the camcorder is to be used when the  
camcorder is connected to an external device via USB.  
USB Connect Setting ... Sets the connection mode when the camcorder is connected to a computer  
or a USB device.  
USB LUN Setting............ Sets the camcorder to improve the compatibility of a USB connection by  
restricting some USB functions.  
Disc Burn.......................... Allows you to save images onto discs by a single press of a button.  
GB  
ꢃ7  
         
(General Settings)  
Beep................................... Sets whether the camcorder sounds operation beeps or not.  
LCD Brightness .............. Adjusts the brightness of the LCD screen.  
Your Location*2 .............. Displays the current location on a map.  
GPS Setting*2 .................. Sets the GPS signal reception on or off.  
REC Lamp......................... Sets the recording lamp to light up or not.  
Remote Ctrl ..................... Sets whether the Wireless Remote Commander is to be used or not.  
A. Shut Off........................ Changes the [A. Shut Off] setting (p. 13).  
Power On By LCD*4 ....... Sets whether or not the camcorder is turned on and off when you open  
and close the LCD screen.  
Language Setting ......... Sets the display language (p. 17).  
Calibration....................... Calibrates the touch panel.  
Battery Info...................... Displays the battery information.  
Demo Mode.................... Sets whether the demonstration appears or not.  
(Clock Settings)  
Date & Time Setting ..... Sets the [Date & Time], [Summer Time], or [Date & Time Format] (p. 15).  
Area Setting .................... Adjusts for a time difference without stopping the clock (p. 15).  
Auto Clock ADJ *2.......... Sets whether the camcorder adjusts the clock automatically by acquiring  
the time from GPS or not.  
Auto Area ADJ*2............. Sets whether the camcorder compensates for a time differences  
automatically by acquiring the current location information from GPS or  
not.  
*1 HDR-CX690E/CX700E/CX700VE  
*2 HDR-CX560VE/CX700VE  
*3 HDR-CX560E/CX560VE/CX700E/CX700VE  
*4 HDR-CX560E/CX560VE  
GB  
     
Getting detailed  
information from the  
“HandycamHandbook  
The “Handycam” Handbook is a user guide  
designed to be read on a computer screen.  
The “Handycam” Handbook is intended to  
be read when you want to know more about  
operating your camcorder.  
To view the “Handycam” Handbook,  
double-click the short-cut icon on the  
computer screen.  
1
To install the “Handycam”  
Handbook on a Windows  
computer, place the supplied  
CD-ROM in the disc drive of your  
computer.  
When using a Macintosh, open the [Handbook]  
– [GB] folder in the CD-ROM, then copy  
[Handbook.pdf].  
You need Adobe Reader to read “Handycam”  
Handbook. If it is not installed on your  
computer, you can download it from the Adobe  
Systems web page:  
Refer to “PMB Help” for details on the supplied  
software “PMB” (p. 37).  
The installation screen appears.  
If the screen does not appear, click  
[Start] [Computer] (in Windows  
XP, [My Computer]), then double- click  
[SONYPMB(E:)](CD- ROM)* [install.  
exe].  
* Drive names (such as (E:)) may vary  
depinding on the computer.  
2
3
Click [Handbook].  
Click the desired language  
and the model name of your  
camcorder [Install], and follow  
the on- screen instructions to  
install “HandycamHandbook.  
The model name of your camcorder is  
printed on the bottom surface.  
GB  
ꢃ9  
   
Additional information  
Troubleshooting  
wall outlet (wall socket) (p. 13).  
If you run into any problems using your  
camcorder, follow the steps below.  
The camcorder does not operate even  
when the power is set to on.  
Check the list (p. 60 to 62), and  
inspect your camcorder.  
It takes a few seconds for your camcorder to  
be ready to shoot after the power is turned on.  
This is not a malfunction.  
Disconnect the AC Adaptor from the wall  
outlet (wall socket) or remove the battery  
pack, then reconnect it after about 1 minute.  
If your camcorder still does not work, press  
RESET (p. 75) using a pointed object. (If you  
press RESET, all settings, including the clock  
setting, are reset.)  
Remove the power source, attach  
the power source again after about 1  
minute, and turn the camcorder on.  
Press RESET (p. 75) using a pointed  
object, and turn the camcorder on.  
If you press RESET, all settings,  
The temperature of your camcorder is  
extremely high. Turn off the camcorder and  
leave it for a while in a cool place.  
including the clock setting, are reset.  
The temperature of your camcorder is  
extremely low. Leave the camcorder with the  
power turned on. If you still cannot operate  
your camcorder, turn off the camcorder and  
take it to a warm place. Leave the camcorder  
there for a while, then turn on the camcorder.  
Contact your Sony dealer or local  
authorized Sony service facility.  
Your camcorder may be required to initialize  
or change the current internal memory (HDR-  
CX560E/CX560VE/CX700E/CX700VE) of your  
camcorder, depending on the problem. In the  
event of this, the data stored on the internal  
memory will be deleted. Be sure to save the  
data on the internal memory on other media  
(backup) before sending your camcorder for  
repair. We will not compensate you for any loss  
of internal memory data.  
During repair, we may check a minimum  
amount of data stored on the internal memory  
in order to investigate the problem. However,  
your Sony dealer will neither copy nor retain  
your data.  
Your camcorder gets warm.  
Your camcorder may become warm during  
operation. This is not a malfunction.  
The power abruptly turns off.  
Use the AC Adaptor (p. 13).  
Turn on the power again.  
Charge the battery pack (p. 11).  
Pressing START/STOP or PHOTO does not  
record images.  
See the “Handycam” Handbook (p. 59) for  
details on the symptoms of your camcorder,  
and “PMB Help” (p. 40) on connecting your  
camcorder to a computer.  
Press MODE to turn on the  
(Photo) lamp.  
Your camcorder is recording the image you  
have just shot on the recording media. You  
cannot make any new recordings during this  
period.  
(Movie) or  
The power does not turn on.  
The recording media is full. Delete  
unnecessary images (p. 35).  
Attach a charged battery pack to the  
camcorder (p. 11).  
Connect the plug of the AC Adaptor to the  
G0B  
       
Total number of movie scenes or photos has  
exceeded the recordable capacity of your  
camcorder (p. 64). Delete unnecessary images  
Self-diagnosis display/Warning  
indicators  
If indicators appear on the LCD screen  
or viewfinder (HDR-CX690E/CX700E/  
CX700VE), check the following.  
If the problem persists even after you  
have tried to fix a couple of times, contact  
your Sony dealer or local authorized Sony  
service facility. In this case, when you  
contact them, give them all the numbers of  
the error code beginning with C or E.  
The recording stops.  
The temperature of your camcorder is  
extremely high/low. Turn off your camcorder  
and leave it for a while in a cool/warm place.  
“PMBcannot be installed.  
Check the computer environment or  
installation procedure required to install  
“PMB” (p. 37).  
C:04:  
“PMBdoes not work correctly.  
The battery pack is not an “InfoLITHIUM”  
battery pack V series. Use an “InfoLITHIUM”  
battery pack (V series) (p. 11).  
Quit “PMB” and restart your computer.  
Connect the DC plug of the AC Adaptor to  
your camcorder securely (p. 11).  
The camcorder is not recognized by the  
computer.  
Disconnect devices from the USB jack of the  
computer other than the keyboard, mouse,  
and your camcorder.  
Disconnect the USB cable from the computer  
and your camcorder, and restart the computer,  
then connect the computer and your  
C:06:  
The battery pack temperature is high. Change  
the battery pack or place it in a cool place.  
C:13:/ C:32:  
camcorder again in an orderly manner.  
When both the built-in USB cable and other  
USB cable (that is connected to the USB port  
on the camcorder) are connected to external  
devices at the same time, disconnect the one  
that is not connected to a computer.  
Remove the power source. Reconnect it and  
operate your camcorder again.  
E::  
Follow the steps from on page 60.  
Battery power is low.  
The battery pack temperature is high. Change  
the battery pack or place it in a cool place.  
GB  
ꢄ1  
 
The recording media is full. Delete unnecessary  
images (p. 35).  
Photos cannot be recorded during processing.  
Wait for a while, then record.  
No memory card is inserted (p. 19).  
When the indicator flashes, there is not  
enough free space for recording images. Delete  
unnecessary images (p. 35), or format the  
memory card after storing the images on other  
media.  
When [  
Quality  
REC Mode] is set to [Highest  
] or [50p Quality ], you cannot  
capture photos while recording movies.  
The Image Database File is damaged. Check  
Furthermore, if [  
Frame Rate] is set to [25p],  
the data base file by touching  
(MENU)  
you cannot record photos while the camcorder  
is in movie recording standby mode.  
[Setup] [ (Media Settings)]   
[Repair Img. DB F.] the recording  
medium (HDR-CX560E/CX560VE/CX700E/  
CX700VE).  
The memory card is damaged. Format the  
memory card with your camcorder (p. 57).  
Incompatible memory card is inserted (p. 19).  
The memory card is write-protected.  
Access to the memory card was restricted on  
another device.  
There is something wrong with the flash.  
The amount of light is not sufficient. Use the  
flash.  
The camcorder is unsteady. Hold the camcorder  
steady with both hands. However, note that  
the camera-shake warning indicator does not  
disappear.  
GB  
   
Recording time of  
movies/number of  
recordable photos  
“HD” stands for high definition image  
quality, and “STD” stands for standard  
image quality.  
Typical recording time shows the time when  
you repeat recording start/stop, switching the  
MODE lamp, and zooming.  
Times measured when using the camcorder at  
25 C (77 °F). 10 C to 30 C (50 °F to 86 °F) is  
recommended.  
The recording and playback time will be  
shorter when you use your camcorder in low  
temperatures.  
Expected time of recording and  
playback with each battery pack  
The recording and playback time will be shorter  
depending on the conditions under which you  
use your camcorder.  
Recording time  
Approximate time available when you use a  
fully charged battery pack.  
Playing time  
Approximate time available when you use a  
fully charged battery pack.  
HDR-CX560E/CX560VE  
(unit: minute)  
Battery pack  
Continuous  
recording time  
Typical recording  
time  
HDR-CX560E/CX560VE  
(unit: minute)  
Image quality  
HD STD  
HD STD  
NP-FV50  
(supplied)  
NP-FV70  
125  
130  
60  
65  
Battery pack  
Image quality  
NP-FV50  
(supplied)  
HD  
215  
STD  
225  
260  
515  
270  
535  
130  
255  
135  
265  
NP-FV100  
NP-FV70  
NP-FV100  
440  
870  
465  
925  
HDR-CX690E/CX700E/CX700VE  
(unit: minute)  
Battery pack  
Continuous  
recording time  
Typical recording  
time  
HDR-CX690E/CX700E/CX700VE  
(unit: minute)  
Image quality  
HD STD  
HD STD  
Battery pack  
NP-FV50  
(supplied)  
NP-FV70  
125  
135  
260  
280  
515  
555  
130  
140  
270  
290  
535  
580  
60  
65  
130  
140  
255  
275  
65  
70  
135  
145  
265  
290  
Image quality  
NP-FV50  
(supplied)  
HD  
215  
240  
440  
490  
870  
980  
STD  
225  
255  
465  
525  
NP-FV70  
NP-FV100  
NP-FV100  
925  
1045  
Top: When the LCD screen is opened  
Bottom: When recording with the viewfinder  
without opening the LCD screen  
Each recording time is measured when the  
camcorder is recording high definition image  
Top: When the LCD screen is opened  
Bottom: When playing with the viewfinder  
without opening the LCD screen  
quality (HD) movies with [  
to [Standard ].  
REC Mode] set  
GB  
ꢄꢁ  
   
Recording mode  
Recording time  
Expected recording time of movies  
HDR-CX700E HDR-CX700VE  
22 h 25 m 22 h 15 m  
(17 h 0 m) (16 h 50 m)  
38 h 40 m 38 h 20 m  
(31 h 45 m) (31 h 30 m)  
[Standard  
]
Internal recording media  
HDR-CX560E/CX560VE  
[Long Time  
(5.1ch)*  
]
]
High definition image quality (HD) in h (hour) and m  
(minute)  
40 h 5 m 39 h 45 m  
(32 h 45 m) (32 h 30 m)  
[Long Time  
(2ch)*  
Recording mode  
Recording time  
HDR-CX560E HDR-CX560VE  
5 h 15 m  
(5 h 15 m) (5 h 10 m)  
6 h 15 m 6 h 10 m  
(6 h 15 m) (6 h 10 m)  
5 h 10 m  
[50p Quality  
]
Standard definition image quality (STD) in h (hour) and  
m (minute)  
[Highest Quality  
]
Recording mode  
Recording time  
HDR-CX700E HDR-CX700VE  
8 h 25 m  
8 h 20 m  
[High Quality  
]
23 h 10 m  
23 h 0 m  
[Standard  
]
]
(8 h 25 m) (8 h 20 m)  
(21 h 20 m) (21 h 10 m)  
(5.1ch)*  
14 h 55 m 14 h 40 m  
(11 h 20 m) (11 h 10 m)  
25 h 45 m 25 h 25 m  
(21 h 10 m) (20 h 50 m)  
[Standard  
]
23 h 55 m 23 h 40 m  
(21 h 55 m) (21 h 45 m)  
[Standard  
(2ch)*  
[Long Time  
(5.1ch)*  
]
* You can change the recording sound format with  
[Audio Mode] (p. 56).  
26 h 40 m 26 h 20 m  
(21 h 45 m) (21 h 30 m)  
[Long Time  
(2ch)*  
]
Notes  
The number in ( ) is the minimum recordable  
time.  
Standard definition image quality (STD) in h (hour) and  
m (minute)  
Recording mode  
Recording time  
Tips  
You can record movies of a maximum of 3,999  
scenes with high definition image quality (HD),  
and 9,999 scenes with standard definition image  
quality (STD).  
The maximum continuous recording time of  
movies is approximately 13 hours.  
HDR-CX560E HDR-CX560VE  
15 h 25 m 15 h 15 m  
(14 h 15 m) (14 h 0 m)  
[Standard  
]
]
(5.1ch)*  
15 h 55 m 15 h 40 m  
(14 h 35 m) (14 h 25 m)  
[Standard  
(2ch)*  
If you want to record up to the  
maximum recording time indicated  
in the table, you need to delete the  
HDR-CX700E/CX700VE  
High definition image quality (HD) in h (hour) and m  
(minute)  
demonstration movie on your camcorder  
(HDR-CX560E/CX560VE/CX700E/CX700VE).  
Your camcorder uses the VBR (Variable Bit  
Rate) format to automatically adjust image  
quality to suit the recording scene. This  
technology causes fluctuations in the recording  
time of the media. Movies containing quickly  
moving and complex images are recorded at  
a higher bit rate, and this reduces the overall  
recording time.  
Recording mode  
Recording time  
HDR-CX700E HDR-CX700VE  
7 h 55 m  
(7 h 55 m) (7 h 50 m)  
7 h 50 m  
[50p Quality  
]
[Highest Quality  
]
9 h 20 m  
(9 h 20 m) (9 h 15 m)  
9 h 15 m  
12 h 45 m 12 h 35 m  
(12 h 45 m) (12 h 35 m)  
[High Quality  
]
GB  
   
Memory card  
Expected number of recordable  
photos  
High definition image quality (HD)  
(unit: minute)  
16 GB 32 GB  
Internal recording media (HDR-CX560E/  
CX560VE/CX700E/CX700VE)  
You can record the maximum 40,000  
photos.  
2 GB  
9
(9)  
4 GB  
15  
8 GB  
35  
75  
150  
(15) (35) (75) (150)  
10  
20  
40  
85  
180  
(10) (20) (40) (85) (180)  
Memory card  
10  
(10) (25) (60) (120) (245)  
25 50 105 210 430  
(15) (35) (80) (160) (325)  
25  
60  
120  
245  
12.3M  
2 GB  
4 GB  
8 GB  
16 GB  
32 GB  
360  
720  
1450  
2900  
5900  
40 90 180 370 745  
(35) (70) (150) (300) (610)  
45 90 190 380 770  
(35) (75) (155) (310) (630)  
5.1ch*  
2ch*  
The selected image size is effective when the  
(Photo) lamp is lit.  
The number of recordable photos of memory  
card shown is for the maximum image size  
of your camcorder. The actual number of  
recordable photos is displayed on the LCD  
screen during recording (p. 72).  
The number of recordable photos of memory  
card may vary depending on the recording  
conditions.  
Standard definition image quality (STD)  
(unit: minute)  
2 GB  
4 GB  
8 GB  
16 GB 32 GB  
25  
50  
110  
220  
445  
(20) (50) (100) (205) (410)  
5.1ch*  
25  
55  
110  
225  
460  
(25) (50) (100) (210) (420)  
2ch*  
* You can change the recording sound format with  
[Audio Mode] (p. 56).  
Notes  
The unique pixel array of Sony’s ClearVid and  
the image processing system (BIONZ) allow  
still image resolution equivalent to the sizes  
described.  
Notes  
The recordable time may vary depending on the  
recording and subject conditions and [ REC  
Mode] and [ Frame Rate] (p. 56).  
The number in ( ) is the minimum recordable  
time.  
GB  
ꢄꢃ  
 
Precautions  
Tips  
On use and care  
You can also use memory card with a capacity  
of under 1 GB for recording photos.  
The following list shows the bit rate, pixels and  
aspect ratio of each recording mode (movie +  
audio, etc.).  
High definition image quality (HD):  
PS: Max. 28 Mbps 1,920 1,080 pixels/16:9  
FX: Max. 24 Mbps 1,920 1,080 pixels/16:9  
FH: Approx. 17 Mbps (average) 1,920 1,080  
pixels/16:9  
Do not use or store the camcorder and  
accessories in the following locations:  
Anywhere extremely hot, cold or humid.  
Never leave them exposed to temperatures  
above 60 C (140 °F), such as under direct  
sunlight, near heaters or in a car parked in  
the sun. They may malfunction or become  
deformed.  
Near strong magnetic fields or mechanical  
vibration. The camcorder may malfunction.  
Near strong radio waves or radiation. The  
camcorder may not be able to record properly.  
Near AM receivers and video equipment.  
Noise may occur.  
HQ: Approx. 9 Mbps (average) 1,440 1,080  
pixels/16:9  
LP: Approx. 5 Mbps (average) 1,440 1,080  
pixels/16:9  
Standard definition image quality (STD):  
HQ: Approx. 9 Mbps (average) 720 576  
pixels/16:9, 4:3  
The photo recording pixels and the aspect ratio.  
Photo recording mode:  
4,672 2,628 dots/16:9  
3,504 2,628 dots/4:3  
2,112 1,584 dots/4:3  
640 480 dots/4:3  
Dual recording:  
4,672 2,628 dots/16:9  
3,504 2,628 dots/4:3  
Capturing a photo from a movie:  
1,920 1,080 dots/16:9  
On a sandy beach or anywhere dusty. If  
sand or dust gets in your camcorder, it may  
malfunction. Sometimes this malfunction  
cannot be repaired.  
Near windows or outdoors, where the LCD  
screen, the viewfinder (HDR-CX690E/  
CX700E/CX700VE) or the lens may be  
exposed to direct sunlight. This damages  
the inside of the viewfinder (HDR-CX690E/  
CX700E/CX700VE) or the LCD screen.  
Operate your camcorder on DC 6.8 V/7.2 V  
(battery pack) or DC 8.4 V (AC Adaptor).  
For DC or AC operation, use the accessories  
recommended in these operating instructions.  
Do not let your camcorder get wet, for example,  
from rain or sea water. If your camcorder  
gets wet, it may malfunction. Sometimes this  
malfunction cannot be repaired.  
640 360 dots/16:9  
640 480 dots/4:3  
If any solid object or liquid gets inside the  
casing, unplug your camcorder and have it  
checked by a Sony dealer before operating it  
any further.  
Avoid rough handling, disassembling,  
modifying, physical shock, or impact such  
as hammering, dropping or stepping on the  
product. Be particularly careful of the lens.  
Keep the camcorder turning off when you are  
not using your camcorder.  
Do not wrap your camcorder with a towel, for  
example, and operate it. Doing so might cause  
heat to build up inside.  
GB  
   
When disconnecting the power cord (mains  
lead), pull it by the plug and not the cord (lead).  
Do not damage the power cord (mains lead)  
such as by placing anything heavy on it.  
Do not use a deformed or damaged battery  
pack.  
Handling the camcorder with above  
substances on your hands  
Leaving the casing in contact with rubber or  
vinyl objects for a long period of time  
About care and storage of the lens  
Keep metal contacts clean.  
Wipe the surface of the lens clean with a soft  
cloth in the following instances:  
When there are fingerprints on the lens  
surface  
If the battery electrolytic liquid has leaked:  
Consult your local authorized Sony service  
facility.  
Wash off any liquid that may have contacted  
your skin.  
If any liquid gets in your eyes, wash with  
plenty of water and consult a doctor.  
In hot or humid locations  
When the lens is exposed to salty air such as  
at the seaside  
Store in a well-ventilated location subject to  
little dirt or dust.  
To prevent mold, periodically clean the lens as  
described above.  
When not using your camcorder for a  
long time  
To keep your camcorder in optimum state for a  
long time, turn it on and let it run by recording  
and playing back images about once a month.  
Use up the battery pack completely before  
storing it.  
On charging the pre-installed  
rechargeable battery  
Your camcorder has a pre-installed rechargeable  
battery to retain the date, time, and other settings  
even when the camcorder is turned off. The pre-  
installed rechargeable battery is always charged  
while your camcorder is connected to the wall  
outlet (wall socket) via the AC Adaptor or while  
the battery pack is attached. The rechargeable  
battery will be fully discharged in about 3 months  
if you do not use your camcorder at all. Use  
your camcorder after charging the pre-installed  
rechargeable battery. However, even if the pre-  
installed rechargeable battery is not charged, the  
camcorder operation will not be affected as long  
as you are not recording the date.  
LCD screen  
Do not exert excessive pressure on the LCD  
screen, as it may cause damage.  
If your camcorder is used in a cold place, a  
residual image may appear on the LCD screen.  
This is not a malfunction.  
While using your camcorder, the back of  
the LCD screen may heat up. This is not a  
malfunction.  
To clean the LCD screen  
If fingerprints or dust make the LCD screen  
dirty, it is recommended that you use a soft  
cloth to clean it.  
Procedures  
Connect your camcorder to a wall outlet (wall  
socket) using the supplied AC Adaptor, and leave  
it with the LCD screen closed for more than 24  
hours.  
On handling the casing  
If the casing is soiled, clean the camcorder body  
with a soft cloth lightly moistened with water,  
and then wipe the casing with a dry soft cloth.  
Avoid the following to avoid damage to the  
finish:  
Using chemicals such as thinner, benzine,  
alcohol, chemical cloths, repellent, insecticide  
and sunscreen  
Note on disposal/transfer of the  
camcorder (HDR-CX560E/CX560VE/  
CX700E/CX700VE)  
Even if you delete all movies and still images, or  
perform [Format], data on the internal recording  
media may not be completely erased.  
When you transfer the camcorder, it is  
GB  
ꢄ7  
Specifications  
System  
recommended that you perform [Empty]  
(See “Getting detailed information from the  
“Handycam” Handbook” on page 59.) to prevent  
the recovery of your data. Also, when you dispose  
of the camcorder, it is recommended that you  
destroy the actual body of the camcorder.  
Signal format: PAL color, CCIR standards  
HDTV 1080/50i, 1080/50p specification  
Movie recording format:  
HD: MPEG-4 AVC/H.264 AVCHD format  
compatible (1080 50p/original format)  
STD: MPEG2-PS  
Audio recording system:  
Dolby Digital 2ch/5.1ch  
Dolby Digital 5.1 Creator  
Note on disposal/transfer of memory  
card  
Even if you delete data in the memory card or  
format the memory card on your camcorder or  
a computer, you may not delete data from the  
memory card completely. When you give the  
memory card to somebody, it is recommended  
that you delete data completely using data  
deletion software on a computer. Also, when you  
dispose of the memory card, it is recommended  
that you destroy the actual body of the memory  
card.  
Photo file format  
DCF Ver.2.0 Compatible  
Exif Ver.2.3 Compatible  
MPF Baseline Compatible  
Recording media (Movie/Photo)  
Internal memory  
HDR-CX560E/CX560VE: 64 GB  
HDR-CX700E/CX700VE: 96 GB  
“Memory Stick PRO Duo” media  
SD card (Class 4 or faster)  
When measuring media capacity, 1 GB equals  
1 billion bytes, a portion of which is used for  
system management and/or application files.  
The capacity that a user can use is below.  
HDR-CX560E:  
To change the battery of the Wireless  
Remote Commander  
While pressing on the tab, inset your fingernail  
into the slit to pull out the battery case.  
Place a new battery with the + side facing up.  
Insert the battery case back into the Wireless  
Remote Commander until it clicks.  
approximately 63.9 GB  
HDR-CX560VE:  
approximately 63.1 GB  
HDR-CX700E:  
approximately 96.0 GB  
HDR-CX700VE:  
approximately 95.2 GB  
Viewfinder: Electronic viewfinder: color (HDR-  
CX690E/CX700E/CX700VE)  
Tab  
Image device: 6.2 mm (1/2.88 type) CMOS sensor  
Recording pixels (photo, 16:9):  
Max. 12.3 mega (4 672 2 628) pixels*1  
Gross: Approx. 6 648 000 pixels  
Effective (movie, 16:9)*2:  
WARNING  
Battery may explode if mistreated. Do not  
recharge, disassemble or dispose of in fire.  
Approx. 6 140 000 pixels  
Effective (photo, 16:9):  
Approx. 6 140 000 pixels  
When the lithium battery becomes weak, the  
operating distance of the Wireless Remote  
Commander may shorten, or the Wireless  
Remote Commander may not function  
Effective (photo, 4:3):  
Approx. 4 600 000 pixels  
properly. In this case, replace the battery with  
a Sony CR2025 lithium battery. Use of another  
battery may present a risk of fire or explosion.  
GB  
 
Lens: G lens  
General  
10 (Optical)*2, 14 (Extended)*3, 120   
Power requirements: DC 6.8 V/7.2 V (battery  
(Digital)  
pack) DC 8.4 V (AC Adaptor)  
Filter diameter: 37 mm (1 1/2 in.)  
F1.8 ~ 3.4  
USB Charging: DC 5 V 500 mA  
Average power consumption:  
HDR-CX560E/CX560VE:  
HD: 3.0 W STD: 2.9 W  
Focal length:  
f=3.8 mm ~ 38.0 mm (5/32 in. ~ 1 1/2 in.)  
When converted to a 35 mm still camera  
For movies*2: 26.3 mm ~ 263 mm (1 1/16 in.  
~ 10 3/8 in.) (16:9)  
HDR-CX690E/CX700E/CX700VE:  
During camera recording using the  
viewfinder at normal brightness:  
HD: 2.8 W STD: 2.7 W  
During camera recording using LCD screen  
at normal brightness:  
HD: 3.0 W STD: 2.9 W  
For photos: 26.3 mm ~ 263 mm (1 1/16 in. ~  
10 3/8 in.) (16:9)  
Color temperature: [Auto], [One Push], [Indoor]  
(3 200 K), [Outdoor] (5 800 K)  
Minimum illumination  
11 lx (lux) (in default setting, shutter speed 1/50  
Operating temperature: 0 C to 40 C (32 °F to  
second)  
104 °F)  
3 lx (lux) ([Low Lux] is set to [On], shutter speed  
1/25 second)  
0 lx (lux) (NIGHTSHOT is set to [On])  
Storage temperature: –20 C to + 60 C (‒4 °F to  
+140 °F)  
Dimensions (approx.):  
HDR-CX560E/CX560VE:  
1
*
The unique pixel array of Sony’s ClearVid  
and the image processing system  
(BIONZ) allow still image resolution  
equivalent to the sizes described.  
62 mm 67 mm 126 mm (2 1/2 in. ×  
2 3/4 in. × 5 in.) (w/h/d) including the  
projecting parts  
62 mm 67 mm 133.5 mm (2 1/2 in.  
× 2 3/4 in. × 5 3/8 in.) (w/h/d) including  
the projecting parts, and the supplied  
rechargeable battery pack attached  
HDR-CX690E/CX700E/CX700VE:  
62 mm 72.5 mm 139 mm (2 1/2 in. ×  
2 7/8 in. × 5 1/2 in.) (w/h/d) including the  
projecting parts  
2
3
*
[
SteadyShot] is set to [Standard] or  
[Off].  
SteadyShot] is set to [Active].  
*
[
Input/Output connectors  
A/V Remote Connector: Component/video and  
audio output jack  
HDMI OUT jack: HDMI mini connector  
92 mm 76.5 mm 174 mm (3 5/8 in.  
× 3 1/8 in. × 6 7/8 in.) (w/h/d) including  
the projecting parts, and the supplied  
rechargeable battery pack attached  
USB jack: mini-AB/Type A (Built-in USB) (HDR-  
CX560E/CX560VE: output only)  
Headphone jack: Stereo minijack (3.5 mm)  
MIC input jack: Stereo minijack (3.5 mm)  
Mass (approx.)  
HDR-CX560E/CX560VE:  
LCD screen  
Picture: 7.5 cm (3.0 type, aspect ratio 16:9)  
Total number of pixels: 921 600 (1 920 480)  
385 g (13 oz) main unit only  
435 g (15 oz) including the supplied  
rechargeable battery pack  
HDR-CX690E/CX700E/CX700VE:  
395 g (14 oz) main unit only  
490 g (1 lb 1 oz) including the supplied  
rechargeable battery pack  
GB  
ꢄ9  
AC Adaptor AC-L200C/AC-L200D  
On trademarks  
“Handycam” and  
registered trademarks of Sony Corporation.  
AVCHD” and AVCHD” logotype are  
trademarks of Panasonic Corporation and Sony  
Corporation.  
Power requirements: AC 100 V - 240 V,  
are  
50 Hz/60 Hz  
Current consumption: 0.35 A - 0.18 A  
Power consumption: 18 W  
Output voltage: DC 8.4 V*  
“Memory Stick,” “  
,” “Memory Stick Duo,”  
,” “Memory Stick PRO  
,” “Memory  
Operating temperature: 0 C to 40 C (32 °F to  
104 °F)  
Duo,” “  
Storage temperature: –20 C to + 60 C (‒4 °F to  
Stick PRO-HG Duo,” “  
“MagicGate,” “  
,”  
,” “MagicGate  
+140 °F)  
Dimensions (approx.): 48 mm 29 mm 81 mm  
(1 15/16 in. 1 3/16 in. 3 1/4 in.) (w/h/d)  
excluding the projecting parts  
Memory Stick” and “MagicGate Memory Stick  
Duo” are trademarks or registered trademarks of  
Sony Corporation.  
Mass (approx.): 170 g (6.0 oz) excluding the  
“InfoLITHIUM” is a trademark of Sony  
Corporation.  
power cord (mains lead)  
* See the label on the AC Adaptor for other  
specifications.  
“x.v.Colour” is a trademark of Sony  
Corporation.  
“BIONZ” is a trademark of Sony Corporation.  
Rechargeable battery pack NP-FV50  
Maximum output voltage: DC 8.4 V  
Output voltage: DC 6.8 V  
Maximum charge voltage: DC 8.4 V  
Maximum charge current: 2.1 A  
is a registered trademark of  
Sony Corporation.  
“BRAVIAis a registered trademark of Sony  
Corporation.  
“DVDirect” is a trademark of Sony  
Corporation.  
Capacity  
Typical: 7.0 Wh (1 030 mAh)  
“Blu-ray Disc” and the logo are trademarks.  
Dolby and the double-D symbol are trademarks  
of Dolby Laboratories.  
Minimum: 6.6 Wh (980 mAh)  
Type: Li-ion  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC  
in the United States and other countries.  
Microsoft, Windows, Windows Vista, and  
DirectX are either registered trademarks or  
trademarks of Microsoft Corporation in the  
United States and/or other countries.  
Macintosh and Mac OS are registered  
trademarks of Apple Inc. in the U.S. and other  
countries.  
Design and specifications of your camcorder and  
accessories are subject to change without notice.  
Manufactured under license from Dolby  
Laboratories.  
Intel, Intel Core, and Pentium are trademarks  
or registered trademarks of Intel Corporation  
or its subsidiaries in the United States and other  
countries.  
“ ” and “PlayStation” are registered  
trademarks of Sony Computer Entertainment  
Inc..  
Adobe, the Adobe logo, and Adobe Acrobat  
are either registered trademarks or trademarks  
of Adobe Systems Incorporated in the United  
States and/or other countries.  
7G0B  
NAVTEQ and the NAVTEQ Maps logo are  
trademarks of NAVTEQ in the US and other  
countries.  
SDXC logo is a trademark of SD-3C, LLC.  
MultiMediaCard is a trademark of  
MultiMediaCard Association.  
All other product names mentioned herein may  
be the trademarks or registered trademarks of  
their respective companies. Furthermore, and  
are not mentioned in each case in this manual.  
Add further enjoyment with your PlayStation 3  
by downloading the application for PlayStation 3  
from PlayStation Store (where available.)  
The application for PlayStation 3 requires  
PlayStation Network account and application  
download.  
Accessible in areas where the PlayStation Store is  
available.  
GB  
71  
Quick reference  
Screen indicators  
Center  
Indicator  
Center  
Meaning  
Left  
Right  
[STBY]/[REC]  
Recording status  
Slide show set  
NightShot  
Warning  
Playback mode  
Bottom  
Right  
Left  
Indicator  
Meaning  
Indicator  
Meaning  
Recording image quality  
(HD/STD), frame rate  
(50p/50i/25p) and  
recording mode (PS/FX/  
FH/HQ/LP)  
MENU button  
Self-timer recording  
GPS triangulating status  
50i  
60min  
Remaining battery  
Recording/playback/  
editing media  
Counter (hour:minute:  
second)  
Estimated recording  
remaining time  
Wide Mode  
Fader  
[Face Detection] set to  
[Off]  
[Smile Shutter] set to [Off]  
Manual focus  
0:00:00  
00Min  
Scene Selection  
Photo size  
Approximate number of  
recordable photos and  
photo size  
White Balance  
SteadyShot off  
White Balance Shift  
Tele Macro  
x.v.Color  
Conversion Lens  
Zebra  
9999  
9999  
Playback folder  
Current playing movie or  
photo/Number of total  
recorded movies or photos  
100/112  
Bottom  
Indicator  
Peaking  
Meaning  
Cinematone  
Destination  
Intelligent Auto (face  
detection/scene detection/  
camera-shake detection)  
View Images button  
Micref Level low  
Wind Noise Reduct.  
Blt-in Zoom Mic  
Audio Mode  
Audio Level Display  
Low Lux  
7GB  
     
Parts and controls  
Figures in ( ) are reference pages.  
Indicator  
Meaning  
Spot Meter/Fcs/ Spot  
Meter/ Exposure  
EV  
AE Shift  
Shutter Speed  
IRIS  
Intelligent Auto  
Slide show button  
Data file name  
Protected image  
101-0005  
Flash/  
Red Eye Reduction  
Indicators and their positions are approximate  
and may differ from what you actually see.  
Some indicators may not appear, depending on  
your camcorder model.  
Built-in microphone  
Active Interface Shoe  
The Active Interface Shoe supplies power to  
optional accessories such as a video light, a  
flash, or a microphone. The accessory can be  
turned on or off as you operate the POWER  
switch on your camcorder.  
Flash  
GB  
7ꢁ  
 
Lens (G lens)  
Attaching the lens hood (HDR-CX690E/  
CX700E/CX700VE)  
Align the lens hood with the camcorder  
properly, then turn the securing ring of the  
lens hood in the direction of the arrow.  
When attaching the lens hood, align the  
opening section of the lens hood with the  
flash-emitting section of the camcorder  
properly.  
LCD screen/Touch panel  
If you rotate the LCD panel 180 degrees, you  
can close the LCD panel with the LCD screen  
facing out. This is convenient during playback  
operations.  
Speaker  
HDR-CX560E/CX560VE  
Securing ring  
To remove the lens hood  
Turn the securing ring of the lens hood in the  
opposite direction from that of the arrow to  
remove the lens hood.  
When recording movies using the NightShot  
function, remove the lens hood. If you do  
not do so, the shadow of the lens hood will  
be reflected and recorded in your movies.  
Remove the lens hood when you operate  
the camcorder with the supplied remote  
commander.  
HDR-CX690E/CX700E/CX700VE  
Remote sensor/Infrared port  
Camera recording lamp (58)  
The camera recording lamp lights up in red  
during recording. The lamp flashes when the  
remaining recording media capacity or battery  
power is low.  
MANUAL button (27)  
7GB  
 
HDR-CX690E/CX700E/CX700VE  
(View Images) button (28)  
NIGHTSHOT button (27)  
POWER button (15)  
RESET button  
Press RESET using a pointed object.  
Press RESET to initialize all the settings  
including the clock setting.  
Memory card access lamp (20)  
While the lamp is lit or flashing, the  
camcorder is reading or writing data.  
Memory card slot (20)  
(Movie)/ (Photo) lamps (22)  
MODE button (22)  
Power zoom lever  
PHOTO button (24)  
HDR-CX560E/CX560VE  
Eyecup (HDR-CX690E/CX700E/CX700VE)  
Viewfinder (HDR-CX690E/CX700E/  
Viewfinder lens adjustment lever (HDR-  
START/STOP button (22)  
/CHG (flash/charge) lamp (11)  
MIC (PLUG IN POWER) jack  
A/V Remote Connector (32)  
(headphones) jack  
Built-in USB Cable (12)  
Tripod receptacle (27)  
BATT (battery) release lever (13)  
GB  
7ꢃ  
   
Index  
A
M
T
A/V connecting cable...........33, 53  
Macintosh....................................37  
Maintenance................................66  
MANUAL dial.............................27  
Media Select ................................18  
Media Settings.............................18  
Memory card...............................19  
“Memory Stick” media...............19  
“Memory Stick PRO-HG Duo”  
media............................................19  
“Memory Stick PRO Duo”  
media............................................19  
Thumbnail...................................35  
Tripod.....................................27, 75  
Troubleshooting..........................60  
Turning the power on ................15  
TV.................................................32  
B
Battery pack.................................11  
Built-in USB Cable.................5, 12  
C
U
Care ..............................................66  
Charging the battery pack.........11  
Charging the battery pack  
abroad ..........................................14  
Clock Set......................................15  
Computer.....................................37  
Computer system........................37  
Connection..................................32  
Copy.............................................20  
USB cable...............................48, 51  
V
VBR ..............................................64  
Menus...........................................55  
Movies....................................22, 30  
W
Wall outlet (wall socket)............11  
Warning indicators.....................61  
Windows......................................37  
N
NightShot.....................................27  
D
P
Data Code....................................16  
Date/Time....................................16  
Delete ...........................................35  
Disc recorder...............................52  
DVDirect Express.......................48  
DVD writer............................48, 51  
Photos ....................................24, 31  
Playing..........................................28  
PMB (Picture Motion  
Browser).......................................40  
Power on......................................15  
Precautions..................................66  
PS..................................................26  
E
R
Event Index..................................28  
Event View...................................28  
External media............................45  
Recording ....................................21  
Recording and playback time ...63  
Recording media.........................18  
Recording time of movies/  
number of recordable photos....63  
F
Fully charged...............................11  
Repair...........................................60  
RESET..........................................75  
G
GPS...............................................25  
S
H
Saving images in external  
“Handycam” Handbook.............59  
Highlight Playback.....................31  
media............................................45  
Screen indicators ........................72  
Self-diagnosis display.................61  
Setting the date and time...........15  
Software .......................................37  
Specifications ..............................68  
Supplied items...............................5  
I
You will find the menu lists  
Install............................................37  
L
Language Setting ........................17  
7GB  
 
GB  
77  
7GB  
Additional information on this product and  
answers to frequently asked questions can be  
found at our Customer Support Website.  
Printed on 70% or more recycled paper using  
VOC (Volatile Organic Compound)-free  
vegetable oil based ink.  
2011 Sony Corporation  
Printed in Japan  

Wagan Bluetooth wireless handsfree car kit 2444 User Manual
Vulcan Hart ML 052214 User Manual
Tiffen TiltTrigger Pro SQ User Manual
Sony Handycam DCRSX85 User Manual
Sony DSLR A390L User Manual
Sony CCD TRV68 User Manual
Sony Cassette Corder TCM AP5V User Manual
Sony Camcorder CCD TR3000 User Manual
Sharp ER A242 User Manual
Samsung SBH700 User Manual