Sanyo Car Satellite TV System DP39843 User Manual

TRADEMARKS ________  
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK  
OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.  
RISK OF ELECTRIC SHOCK DO NOT OPEN!  
CAUTION  
Manufactured under license from Dolby  
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTE-  
NANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.  
CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO  
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
Laboratories. “Dolby” is  
Dolby Laboratories.  
a
trademark of  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
15. If an outside antenna is connected to the television equipment,  
be sure the antenna system is grounded so as to provide some  
protection against voltage surges and built up static charges.  
In the U.S. Selection 810-21 of the National Electrical Code pro-  
vides information with respect to proper grounding of the mast  
and supporting structure, grounding of the lead-in wire to an  
antenna discharge unit, size of grounding conductors, location  
of antenna discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrodes.  
class  
(38.5diagonal)  
HDMI, the HDMI Logo and High-Definition  
Multimedia Interface are trademarks or regis-  
tered trademarks of HDMI Licensing LLC in  
the United States and other countries.  
Model No.:  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance  
with the manufacturer’s instructions.  
DP39843  
SANYO television customers  
Owner’s  
Manual  
(English)  
should  
Recycling at 888-769-0149 or  
visit their website at  
contact  
MRM  
8. Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers) that  
produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-  
type plug. A polarized plug has two blades with one wider than  
the other. A grounding-type plug has two blades and a third  
grounding prong. The wide blade or the third prong are provided  
for your safety. If the provided plug does not fit fully into your out-  
let, consult an electrician for replacement of the obsolete outlet.  
16. An outside antenna system should not be located in the vicini-  
ty of overhead power lines or other electrical light or power  
circuits, or where it can fall into such power lines or circuits.  
When installing an outside antenna system, extreme care  
should be taken to keep from touching such power lines or cir-  
cuits as contact with them might be fatal.  
regarding SANYO’s waste  
management plan.  
EXAMPLE OF ANTENNA GROUNDING ACCORDING  
TO NATIONAL ELECTRICAL CODE, ANSI/NFPA 70  
1080p HDTV LCD  
10. Protect the power cord from being walked on or pinched par-  
ticularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
1JC0P1P0043 - -  
Part No.:  
© 2013 Sanyo Manufacturing Corporation  
11. Only use attachments/accessories specified by the  
manufacturer.  
Please read before operating your HDTV!  
12. Use only with the cart, stand, tripod, bracket,  
or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused  
for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is  
required when the apparatus has been damaged in any way,  
such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does not operate nor-  
mally, or has been dropped.  
“Note to CATV system installer:  
SPECIFICATIONS  
PROTECTING THE LCD  
POSITIONING THE HDTV  
This reminder is provided to call the CATV system installer’s  
attention to Article 820-40 of the NEC that provides guidelines for  
proper grounding and, in particular, specifies that the cable  
ground shall be connected to the grounding system of the build-  
ing, as close to the point of cable entry as practical.”  
NOTE: Design and specifications are  
subject to change without notice.  
SCREEN  
Always use a firm and flat surface when  
positioning your HDTV.  
CAUTION: The screen can be damaged if  
Power Requirement:  
Source: AC 120V, 60Hz  
it is not maintained properly.  
Do not position the unit in a confined  
area.  
17. Wall or Ceiling Mounting—The product should be mounted to  
a wall or ceiling only as recommended by the manufacturer.  
18. Apparatus shall not be exposed to dripping or splashing, and no  
objects filled with liquids, such as vases, shall be placed on it.  
19. When the MAINS plug is used as the disconnect device, the  
disconnect device shall remain readily operable.  
Do not use hard objects such as hard  
cloth or paper to clean the screen.  
AC Power Consumption: 120 watts  
Allow adequate space for proper venti-  
lation.  
Weight: 24.5 lbs (w/stand)  
Do not use excessive pressure when  
cleaning the screen; excessive pressure  
can cause permanent discoloration or  
dark spots.  
Do not position the HDTV where it is  
easily reachable by small children and  
may present risk of injury.  
Dimensions _________________________  
WIDTH HEIGHT DEPTH  
w/stand  
36.7  
25.1  
22.8  
8.8  
4.3  
NEVER spray liquids on the screen.  
Once HDTV is positioned, remove the  
protective film covering front cabinet.  
FCC INFORMATION ________________________________________________  
w/out stand  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen-  
erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm-  
ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
HANDLING PRECAUTIONS  
Handle by the cabinet only.  
NOTE: Dimensions are in inches.  
The American Academy of Pediatrics dis-  
courages media use by children younger  
than two years. For more information,  
Handling by two or more people is rec-  
ommended.  
– Reorient or relocate the receiving antenna.  
Never touch the screen when handling.  
CONTAINS MERCURY  
LAMPS, DISPOSE OF  
PROPERLY  
– Increase the separation between the equipment and receiver.  
Handling damage is not covered under  
warranty.  
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
– Consult the dealer or an experienced radio/TV technician for help.  
CAUTION: FCC Regulations state that improper modifications or unauthorized changes to this unit may void the user’s authority to  
Do not remove the protective film  
covering the front cabinet while  
handling the HDTV.  
operate the unit.  
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require  
a safety connection to electrical earth.  
GETTING STARTED  
STAND ASSEMBLY ______  
NOTE: Skip these steps if you are wall  
BATTERY INSTALLATION  
Install two (2) “AA” batteries in the  
remote control. (Not included)  
INITIAL CHANNEL SEARCH  
HDTV INPUT/OUTPUT REFERENCE ________________________________________  
Before proceeding, please make  
sure to correctly hook up your  
antenna or cable connection and  
all AV equipment to your HDTV.  
ANT Analog / Digital Antenna Input  
Hook up your indoor or outdoor digital antenna, or a direct  
Cable service (Analog or ClearQAM).  
mounting the TV.  
1
HDTV SIDE PANEL  
PRECAUTIONS:  
Place HDTV face down on  
a
• Replace both batteries at the same  
time. Do not use a new battery with a  
used battery.  
1
1
2
padded or cushioned flat surface  
to protect the screen and finish.  
1. PLUG IN AC POWER CORD  
120V AC, 60Hz  
2
VIDEO INPUT (COMPONENT/COMPOSITE combo)  
Carefully insert the stand base to  
the bottom of the HDTV and secure  
it by inserting four (4) screws as  
indicated in the diagram below.  
COMPOSITE Connection  
• There’s a risk of explosion if a battery  
is replaced by an incorrect type.  
2. TURN ON TV  
(VIDEO)  
A Composite connection is used to hookup your analog  
equipment such as a VCR or an older DVD player.  
3. TV SET LOCATION SELECTION:  
Select “Home Mode” to set the  
HDTV’s backlight to a lower energy  
consumption level, or select “Store  
Mode” to set the backlight to a retail  
high brightness display level.  
• Keep away from moisture.  
Match the YELLOW connector from your external device to  
the GREEN Y-VIDEO jack on the HDTV.  
• Be sure to match the “+” and “–”  
signs on the batteries with marks  
inside the remote control.  
NOTE: Stand base screws are located  
in the literature package.  
2
3
NOTE: Use the WHITE and RED (L and R) jacks for AUDIO signal.  
(DVI AUDIO)  
• Please properly dispose of used up  
batteries.  
COMPONENT Connection  
4. CHANNEL AND SIGNAL SEARCH:  
Select “Signal Search” and press  
ENTER to perform a channel search  
from an Antenna or a direct Cable  
connection, and a signal search  
from devices hooked up to the  
HDTV’s AV input jacks.  
A Component connection will accept SDTV, EDTV and  
HDTV video signals. Use it for great image quality from di-  
gital devices such as a DVD player or Video Game system.  
WARNING: The batteries (or battery  
pack) shall not be exposed to excessive  
heat such as sunshine, fire or the like.  
HDMI  
INPUT2  
Match your digital device’s Component output jacks to the  
Component input jack set on your HDTV.  
HDMI  
(DVI)  
ANTENNA CONNECTION FOR  
OFF-AIR SIGNALS OR CABLE  
Hook up your antenna or your cable  
service to the HDTV’s ANT terminal  
with the use of a 75 OHM coaxial cable.  
NOTE: Use the GREEN (Y), BLUE (Pb) and RED (Pr) jacks for the  
VIDEO signal and the WHITE and RED (L and R) jacks for  
the AUDIO signal.  
INPUT1  
Position the HDTV on a firm and  
5. SIGNAL SEARCH RESULT SCREEN  
3
flat surface with adequate space  
for proper ventilation.  
The final setup screen displays ana-  
log and digital channels found, as  
well as AV inputs detected.  
Select Finish Setup and press  
ENTER.  
4
5
3
HDMI (INPUT1 or INPUT2)  
Use HDMI INPUT1 & 2 to hookup HD digital devices such as  
a Blu-ray player, HD Cable Box, HD Satellite Receiver or  
Video-game System.  
Connect your digital device’s HDMI output to any of the two  
(2) HDMI inputs on your HDTV’s side panel with the use of  
an HDMI cable.  
WALL MOUNTING (OPTIONAL)  
Wall mounting of the HDTV must be  
performed by a skilled person.  
NOTE: Keep your indoor antenna at  
least 3 ft. away from the televi-  
sion set and any other electron-  
ic equipment.  
HDTV BACK PANEL  
NOTE: If you wish to repeat the  
process, select Repeat.  
If stand base disassembly is required:  
Place HDTV face down on a padded or  
cushioned flat surface to protect the  
screen and finish.  
ANTENNA  
Channel Search Result: Succesfully Completed  
NOTE: A DVI connection is possible via the HDMI (DVI) INPUT1  
using an appropriate cable or adapter and connecting the  
audio to the L and R (VIDEO INPUT) jacks.  
DIGITAL  
AUDIO OUTPUT  
Analog Channels 16  
Digital Channels 26  
Remove the four (4) screws securing  
the foot stand. CAUTION: Hold the  
stand firmly as you remove the last  
screw.  
Video  
HDMI 1  
HDMI 2  
4
5
USB  
ANALOG / DIGITAL  
Repeat  
Finish Setup  
USB input jack is used to connect a USB mass storage  
device to watch digital images stored in JPEG format.  
ANTENNA IN  
CABLE  
If you are having problems, call us toll-free at 1-800-877-5032  
Use the four (4) screws included in the  
literature package (or removed from  
the foot stand) to secure the HDTV to a  
wall mounting kit.  
DIGITAL AUDIO OUTPUT (Coaxial)  
Hookup a multichannel receiver with the use of a phono-  
type digital audio cable.  
AV INPUT SELECTION  
Press the INPUT key to select the  
correct AV input for the video source  
you wish to watch.  
The tuner in this HDTV can receive:  
IMPORTANT: Wall mount kit  
must comply with VESA standard  
200 x 200. All four (4) screws must  
be threaded to the wall mount  
and HDTV’s back cabinet  
Digital and Analog off air signals  
from an antenna  
Sanyo Manufacturing Corp. 3333  
Sanyo Road, Forrest City, AR 72335  
NOTE: Unused AV inputs may be dis-  
abled with the Input Setting feature.  
Analog or ClearQAM cable channels  
from a direct Cable TV connection.  
Printed in Mexico, February 2013  
US3C / 39-Z6SP / GXFA  
Mounting screws measurements:  
M6 (6mm) Diameter, Length—12mm  
(maximum)  
Need help?  
1-800-877-5032  
Need help?  
1-800-877-5032  

Westinghouse WST2024ZE User Manual
Weil McLain SERIES 2 LGB 6 User Manual
Swann RemoteCam DVR 410 User Manual
Sony SPK DVF5 User Manual
Sony Dog Mount for Action Cam AKADM1 User Manual
Sony dcr trv270e User Manual
Sony DCR TRV6E User Manual
Sony CDX C5850R User Manual
Sanyo VPC CG100PX User Manual
Samsung SCD250 User Manual