Samsung VP D371(i) User Manual

ENGLISH  
Digital Video Camcorder  
VP-D371(i)/D371W(i)/D372WH(i)/D375W(i)/D975W(i)  
AF  
Auto Focus  
CCD Charge Coupled Device  
LCD Liquid Crystal Display  
Owner’s Instruction Book  
Before operating the unit, please read this Instruction  
Book thoroughly, and retain it for future reference.  
Use only approved battery packs.  
Otherwise, there is a danger of overheating, fire or explosion.  
Samsung is not responsible for problems occurring due to using unapproved batteries.  
AD68-01227G  
ENGLISH  
Contents  
Advanced Recording..........................................................43  
Connection.........................................................................70  
Selecting the Record Mode & Audio Mode.............................43  
Cutting Off Wind Noise (WindCut Plus) ................................44  
Selecting the Real Stereo Function ........................................45  
Setting the Shutter Speed & Exposure...................................46  
Auto Focus / Manual Focus ....................................................47  
Programmed Automatic Exposure Modes (Program AE) .....48  
Setting the White Balance.......................................................50  
Applying Visual Effects............................................................52  
Setting the 16:9 Wide mode....................................................54  
Using the Tele Macro (Macro).................................................55  
Setting the Digital Image Stabilizer (DIS) ...............................56  
Using Back Light Compensation Mode (BLC)........................57  
Zooming In and Out with Digital Zoom (Digital Zoom) .........58  
Still Image Recording ..............................................................59  
Searching for a still image...................................................59  
Copying a Camcorder Tape onto a Video Tape......................70  
Recording (Copying) a TV Programme or Video Tape onto a  
Camcorder Tape (VP-D371i/D371Wi/D372WHi/D375Wi/  
D975Wi only)...........................................................................71  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)..72  
Using a Memory Card (Usable Memory Card) (not supplied) ..72  
Memory Card Functions......................................................72  
Inserting a Memory Card ....................................................72  
Ejecting a Memory Card .....................................................72  
Structure of Folders and Files on the Memory Card..............73  
Selecting the Photo Quality.....................................................74  
Selecting the recording Photo Size (VP-D975W(i) only)........75  
Setting the File Number ..........................................................76  
Taking a Photo Image (JPEG) on the Memory Card..............77  
Viewing Photo Images (JPEG) ...............................................78  
To view a Single Image.......................................................78  
To view a Slide Show .........................................................78  
To view the Multi Display...................................................78  
Protection from accidental Erasure.........................................79  
Deleting Photo Images and Moving Images...........................80  
Formatting a Memory Card .....................................................82  
Recording Moving Images (MPEG) on a Memory Card ........83  
Playing the Moving Images (MPEG) on a Memory Card  
(M.Play Select) .......................................................................85  
Recording Photo Image from a Cassette ...............................86  
Playback.............................................................................60  
Playing Back a Tape on the LCD Screen ...............................60  
Various Functions while in Player Mode.................................61  
Audio Dubbing (VP-D375W(i)/D975W(i) only)........................63  
Dubbed Audio Playback..........................................................64  
Tape Playback on TV Screen..................................................65  
VOICE + Function ...................................................................67  
Audio Effect .............................................................................68  
Setting the AV In/Out  
(VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi only) ............69  
3
ENGLISH  
Contents  
Copying Still Images from a Cassette to a Memory Card  
(Photo Copy)..........................................................................87  
Marking Images for Printing (Print Mark)...............................88  
Removing the Print Mark....................................................88  
Selecting the USB Device (USB Connect)............................94  
Installing DV Media PRO Program .........................................95  
Connecting to a PC .................................................................96  
Disconnecting the USB Cable .............................................96  
Using the PC Camera Function............................................97  
Using the USB Streaming Function .....................................98  
Using the removable Disk Function .....................................98  
TM  
PictBridge (VP-D375W(i)/D975W(i) only)......................89  
Printing Your Pictures – Using the PictBridgeTM ......................89  
Connecting To a Printer.......................................................89  
Selecting Images.................................................................90  
Setting the Number of Prints ...............................................90  
Setting the Date/Time Imprint Option ..................................90  
Printing Images ..................................................................90  
Canceling the Printing.........................................................90  
Maintenance ......................................................................99  
After Finishing a Recording.....................................................99  
Usable Cassette Tapes ...........................................................99  
Cleaning and Maintaining the Camcorder ............................100  
Using Your Camcorder Abroad .............................................101  
IEEE 1394 Data Transfer ....................................................91  
Troubleshooting ...............................................................102  
Transferring IEEE1394 (i.LINK)-DV Standard Data  
Connections.............................................................................91  
Connecting to a DV Device (DVD Recorder, Camcorder, etc.) ..91  
Connecting to a PC.............................................................91  
System Requirements..........................................................91  
Recording with a DV Connection Cable  
Troubleshooting.....................................................................102  
Self Diagnosis Display......................................................102  
Self Diagnosis Display in M.Cam/M.Player Modes  
(VP-D375W(i)/D975W(i) only).........................................103  
Setting menu items................................................................105  
(VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi only)........92  
Specifications.................................................................. 107  
Index............................................................................... 108  
USB Interface (VP-D375W(i)/D975W(i) only) ....................93  
Using USB Interface................................................................93  
Transferring a Digital Image through a USB Connection.......93  
USB Connection Speed depending on the System.................93  
System Requirements..........................................................93  
...........................109  
Power Sources (United Kingdom Only)  
4
ENGLISH  
Notes and Safety Instructions  
Notes regarding the Rotation of the LCD Screen  
Please rotate the LCD Screen carefully as illustrated. Over rotation may  
cause damage to the inside of the hinge that connects the LCD Screen to  
the Camcorder.  
1. Open the LCD Screen 90 degrees to the Camcorder with your finger.  
2. Rotate it to the best angle to record or play.  
I
If you rotate the LCD Screen 180 degrees so it is facing forward, you  
can close the LCD Screen with the display facing out.  
This is convenient during playback operations.  
I
[ Note ]  
Refer to page 29 to adjust brightness and colour of the LCD Screen.  
Notes regarding the LCD Screen, Viewfinder, Lens  
1. Direct sunlight can damage the LCD Screen, the inside of the  
Viewfinder or the Lens. Take pictures of the sun only in low light  
conditions, such as at dusk.  
2. The LCD Screen has been manufactured using high precision  
technology.  
However, there may be tiny dots (red, blue or green in colour) that  
appear on the LCD Screen. These dots are normal and do not  
affect the recorded picture in any way.  
3. Do not pick up the Camcorder by holding the Viewfinder, LCD Screen or Battery Pack.  
4. Applying excessive force to the Viewfinder may damage it.  
Notes regarding the Video Head Cleaning  
I
To ensure normal recording and a clear picture, clean the video heads regularly.  
If a square block-shape distorts playback, or only a blue screen is displayed, the video heads may be dirty.  
If this happens, clean the video heads with a dry type cleaning cassette.  
Do not use a wet-type cleaning cassette. It may damage the video heads.  
I
5
ENGLISH  
Notes and Safety Instructions  
Notes regarding Camcorder  
I
Do not leave the Camcorder exposed to high temperatures (above 60 °C or 140 °F).  
For example, in a parked car in the sun or exposed to direct sunlight.  
I
Do not let the Camcorder get wet. Keep the Camcorder away from rain, sea water, and any other form of moisture.  
If the Camcorder gets wet, it may get damaged. Sometimes a malfunction due to exposure to liquids cannot be  
repaired.  
I
A sudden rise in atmospheric temperature may cause condensation to form inside the Camcorder.  
-
-
When you move the Camcorder from a cold location to a warm location (e.g. from outside to inside during the winter.)  
When you move the Camcorder from a cool location to a hot location (e.g. from inside to outside during the summer.)  
I
I
If the  
(DEW) protection feature is activated, leave the Camcorder for at least two hours in a dry, warm room with  
the cassette compartment opened and the Battery Pack removed.  
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains  
plug shall be readily operable.  
Notices regarding Copyright  
Television programmes, video tapes, DVD titles, films, and other programme materials may be copyrighted.  
Unauthorized copying of copyrighted material may be against the law.  
All the trade names and registered trademarks mentioned in this manual or other documentation provided with your  
Samsung product are trademarks or registered trademarks of their respective holders.  
Servicing & Replacement Parts  
I
Do not attempt to service this Camcorder yourself.  
I
Opening or removing covers may expose you to dangerous voltage or other hazards.  
I
Refer all servicing to qualified service personnel.  
I
When replacement parts are required, be sure the service technician has used replacement parts specified by the  
manufacturer and having the same characteristics as the original part.  
I
Unauthorized substitutions may result in fire, electric shock or other hazards.  
Correct Disposal of This Product  
(Waste Electrical & Electronic Equipment)  
(Applicable in the European Union and other European countries with separate collection systems)  
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its  
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from  
other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.Household users should contact  
either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item  
for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase  
contract. This product should not be mixed with other commercial wastes for disposal.  
6
ENGLISH  
Getting to Know Your Camcorder  
Features  
I
I
I
Digital Data Transfer Function  
with IEEE1394  
Audio Enhancement  
High Power Zoom Lens  
Provides more powerful sound with  
the Real Stereo and Audio Effect  
features.  
Power Zoom lens allows users to  
magnify the subject clearly up to  
X34(VP-D371(i)/D371W(i)/  
D372WH(i)/D375W(i) only),  
X26(VP-D975W(i) only)  
By incorporating the IEEE 1394  
(i.LINK™: i.LINK is a serial data  
transfer protocol and interconnectivity  
system, used to transmit DV data)  
high speed data transport port, both  
moving and photo images can be  
transferred to a PC, making it  
possible to produce or edit various  
images.  
I
Colour TFT LCD  
A high-resolution colour TFT LCD  
gives you clean, sharp images as  
well as the ability to review your  
recordings immediately.  
I
Digital Still Camera Function  
(VP-D375W(i)/D975W(i) only)  
-
Using Memory Card, you can  
easily record and playback  
standard photo images.  
You can transfer standard photo  
images on the Memory Card to  
your PC using the USB interface.  
I
Digital Image Stabilizer (DIS)  
The DIS compensates for any  
handshake, reducing unstable  
images particularly at high  
magnification.  
I
USB Interface for Digital Image  
Data Transfer  
(VP-D375W(i)/D975W(i) only)  
You can transfer images to a PC  
using the USB interface without an  
add-on card.  
-
I
Moving Image Recording on a  
Memory Card  
(VP-D375W(i)/D975W(i) only)  
Moving image recording makes it  
possible to record video onto a  
Memory Card.  
I
I
I
Various Visual Effects  
The Visual Effects allow you to give  
your films a special look by adding  
various special effects.  
I
I
Still Image Recording on a Tape  
Still image recording makes it  
possible to record a still image on a  
tape.  
Back Light Compensation (BLC)  
The BLC function compensates for  
a bright background behind a  
subject you're recording.  
I
MMC/SD card slot  
Mega-pixel CCD  
(VP-D975W(i) only)  
Your camcorder incorporates a 1.0  
mega-pixel CCD. High-resolution  
photo images can be recorded to a  
Memory card.  
(VP-D375W(i)/D975W(i) only)  
MMC/SD card slot is able to use  
MMC(Multi Media Cards) and SD  
cards.  
Program AE  
The Program AE enables you to alter  
the shutter speed and aperture to suit  
the type of scene/action to be filmed.  
I
1200x Digital Zoom  
Allows you to magnify an image up  
to 1200 times its original size.  
7
ENGLISH  
Getting to Know Your Camcorder  
Accessories Supplied with Camcorder  
Make sure that the following basic accessories are supplied with your Digital Video Camcorder.  
Basic Accessories  
1. Lithium Ion Battery Pack  
(SB-LSM80)  
2. AC Power Adapter  
(AA-E9 TYPE)  
3. Audio/Video Cable  
1. Lithium Ion Battery Pack (SB-LSM80)  
2. AC Power Adapter (AA-E9 TYPE)  
3. Audio/Video Cable  
4. Instruction Book  
4. Instruction Book  
5. Lithium Battery (CR2025)  
6. Remote Control (VP-  
D375W(i)/D975W(i) only)  
5. Lithium Battery for Remote Control  
(VP-D375W(i)/D975W(i) only) or Clock.  
(TYPE: CR2025)  
6. Remote Control (VP-D375W(i)/D975W(i) only)  
7. USB Cable (VP-D375W(i)/D975W(i) only)  
8. Software CD (VP-D375W(i)/D975W(i) only)  
9. Lens Cover  
7. USB Cable (VP-D375W(i)  
/D975W(i) only)  
8. Software CD (VP-  
D375W(i)/D975W(i) only)  
9. Lens Cover  
10.Lens Cover Strap  
10. Lens Cover Strap  
[ Notes ]  
I
The contents can vary depending on the sales region.  
Parts and accessories are available at your local Samsung dealer and service centre.  
I
8
ENGLISH  
Getting to Know Your Camcorder  
Front & Left View  
%
!
(VP-D375W(i)/D975W(i) only)  
^
&
@
#
*
$
1. Lens  
6. Function Buttons  
Button <Player>  
<Camera>  
<M.Player> (VP-D375W(i)/D975W(i) only)  
2. Remote Sensor (VP-D375W(i)/D975W(i) only)  
3. Light (VP-D372WH(i)/D375W(i)/D975W(i) only)  
4. TAPE EJECT Switch  
œœ  
√√  
REW  
FF  
REC SEARCH –  
REC SEARCH +  
REV  
FWD  
❙❙ PLAY/STILL  
STOP  
FADE  
S.SHOW (SLIDE SHOW)  
5. EASY.Q Button page 35  
C.NITE/LIGHT  
(VP-D372WH(i)/D375W(i)/D975W(i) only)  
I
MULTI (MULTI DISPLAY)  
7. TFT LCD Screen  
8. Internal Microphone  
[ Caution ]  
Be careful not to cover the internal microphone and lens during recording.  
[ Notes ]  
I
Illustrations of VP-D375W are used in this owner’s instructions.  
I
Although the external appearances of VP-D371(i), VP-D371W(i), VP-D372WH(i), VP-D375W(i) and VP-D975W(i)  
are different, they are both operated in the same way.  
9
ENGLISH  
Getting to Know Your Camcorder  
Left Side View  
!
$
@
#
%
^
(VP-D375W(i)/D975W(i) only)  
1. Q.MENU Button page 20  
3. OK Button  
4. Viewfinder  
5. Speaker  
2. [L / M] (W / T) Button  
W ()  
T ()  
MENU / Q.MENU  
<Player>  
Move Up  
Volume Up  
Move Down  
Volume Down  
6. Mode Switch (CARD/TAPE)  
(VP-D375W(i)/D975W(i) only)  
<Camera>  
Wide / Adjust MF Tele / Adjust MF  
<M.Cam>  
(VP-D375W(i)/D975W(i) only)  
Wide / Adjust MF Tele / Adjust MF  
[ Note ]  
Player  
(VP-D375W(i)/D975W(i) only)  
<M.  
>
When you close LCD panel with the LCD screen  
facing out, [L / M] button function works reversely.  
Previous  
Next  
10  
ENGLISH  
Getting to Know Your Camcorder  
Right & Top View  
!
@
*
(
)
#
$
%
^
1
&
1. Zoom Lever  
7. DC Jack  
Jacks  
2. PHOTO Button page 59  
3. DISPLAY Button  
4. MENU Button  
8. Jacks  
VP-D371(i)  
/D371W(i)/  
D372WH(i)  
9. Jack Cover  
10.Cassette Door  
11. Hand Strap  
IEEE1394  
AV Jack  
AV Jack  
5. Start/Stop Button  
VP-D375W(i)  
/D975W(i)  
IEEE1394  
USB  
6. Power Switch  
(CAMERA or PLAYER)  
11  
ENGLISH  
Getting to Know Your Camcorder  
Rear & Bottom View  
(VP-D375W(i)/D975W(i) only)  
#
!
$
%
@
1. Lithium Battery Cover  
Usable Memory Cards  
2. Charging Indicator  
VP-D375W(i)/D975W(i) only  
3. Memory Card Slot (VP-D375W(i)/D975W(i) only)  
4. Tripod Receptacle  
5. Battery Release Switch  
MMC/SD  
12  
ENGLISH  
Getting to Know Your Camcorder  
Remote Control (VP-D375W(i)/D975W(i) only)  
!
@
#
8
7
$
%
6
5
^
&
*
4
2
(
3
1
)
1. PHOTO Button page 59  
2. START/STOP Button  
10.œ❙❙ / ❙❙(Direction) Button page 61  
11. F.ADV Button page 62  
12.I (STOP) Button  
3. SELF TIMER Button page 38  
4. ZERO MEMORY Button page 37  
5. PHOTO SEARCH Button  
6. A.DUB Button page 63  
7. (FF) Button  
13.❙❙ (STILL) Button  
14.SLOW () Button  
15.DATE/TIME Button  
16.X2 Button page 62  
17.W/T (Zoom) Button  
18.DISPLAY Button  
8. œœ (REW) Button  
9. (PLAY) Button  
13  
ENGLISH  
Preparation  
Using the Hand Strap & Lens Cover  
It is very important to ensure that the Hand Strap has been correctly adjusted before you begin your recording.  
The Hand Strap enables you to:  
-
-
Hold the Camcorder in a stable, comfortable position.  
Press the [Zoom] and [Start/Stop] button without having to change the position of your hand.  
Hand Strap  
1
2
3
Adjusting the Hand Strap  
1. Insert the Hand Strap into the Hand Strap Hook on  
the front side of the Camcorder and pull its end  
through the hook.  
2. Insert your hand into the Hand Strap and adjust its length for your convenience.  
3. Close the Hand Strap.  
1
2
Lens Cover  
Attaching the Lens Cover  
2
3
1. Hook up the Lens Cover with the Lens Cover Strap as illustrated.  
2. Hook up the Lens Cover Strap to the Hand Strap, and adjust it following the  
steps as described for the Hand Strap.  
3. Close the Hand Strap.  
Installing the Lens Cover after Operation  
Press buttons on both sides of the Lens Cover, then attach it to the Camcorder Lens.  
14  
ENGLISH  
Preparation  
Lithium Battery Installation  
Lithium Battery Installation for the Internal Clock  
1. Remove the Battery Pack from the rear of the Camcorder.  
2. Open the Lithium Battery Cover on the rear of the Camcorder.  
3. Position the Lithium Battery in the Lithium Battery Holder, with the  
positive ( ) terminal face up.  
Be careful not to reverse the polarity of the Battery.  
4. Close the Lithium Battery Cover.  
Lithium Battery Installation for the Remote Control  
(VP-D375W(i)/D975W(i) only)  
1. Pull out the Lithium Battery Holder toward the direction of the arrow.  
2. Position the Lithium Battery in the Lithium Battery Holder, with the  
positive ( ) terminal face up.  
3. Reinsert the Lithium Battery Holder.  
Precaution regarding the Lithium Battery  
1. The Lithium Battery maintains the clock function and preset contents of the memory; even if the Battery Pack or AC  
Power adapter is removed.  
2. The Lithium Battery for the Camcorder lasts about 6 months under normal operation from time of installation.  
3. When the Lithium Battery becomes weak or dead, the date/time indicator will display <00:00 1.JAN.2007> when you  
set the <Date/Time> to <On>. When this occurs, replace the Lithium Battery with a new one (type CR2025).  
4. There is a danger of explosion if Battery is incorrectly replaced. Replace only with the same or equivalent type.  
Warning: Keep the Lithium Battery out of reach of children. Should a battery be swallowed, consult a doctor  
immediately.  
15  
ENGLISH  
Preparation  
Using the Lithium Ion Battery Pack  
Use SB-LSM80 or SB-LSM160 Battery Pack only.  
The Battery Pack may be charged a little at the time of purchase.  
Charging the Lithium Ion Battery Pack  
Blinking time  
Charging rate  
Less than 50%  
1. Turn the [Power] switch to [OFF].  
2. Attach the Battery Pack to the Camcorder.  
3. Connect the AC Power adapter (AA-E9 TYPE) to a wall  
socket.  
Once per second  
Twice per second  
50% ~ 75%  
75% ~ 90%  
90% ~ 100%  
Three times per second  
Blinking stops and stays on  
4. Connect the DC cable to the DC jack on the  
Camcorder.  
On for a second and  
off for a second  
Error - Reset the Battery Pack and  
the DC Cable  
I
The charging indicator will start to blink, showing that  
the Battery is charging.  
5. Press and hold the DISPLAY button while charging and the charging status will be displayed  
on the LCD screen for 7 seconds.  
Battery Info  
Battery charged  
I
The battery charge status is given as reference and is an estimation. It may differ  
0%  
50%  
100%  
depending on the Battery capacity and temperature.  
6. When the Battery is fully charged, disconnect the Battery Pack and the AC Power Adapter  
from the Camcorder.  
Even with the Power switched Off, the Battery Pack will still discharge.  
Charging, Recording Times based on Model and Battery Type.  
The continuous recording times given in the table to the right are  
approximations.  
Time  
Charging time  
Recording time  
Battery  
Actual recording time depends on usage.  
Approx.  
1hr 20min  
Approx.  
SB-LSM80  
The continuous recording times in the operating instructions are  
measured using a fully charged Battery Pack at 77 °F (25 °C).  
Even when the Power switched Off, the Battery Pack will still  
discharge if it is left attached to the device.  
1hr 20min  
Approx.  
3hr  
SB-LSM160  
(Option)  
Approx.  
2hr 40min  
16  
ENGLISH  
Preparation  
The amount of continuous recording time available depends on;  
-
-
-
-
The type and capacity of the Battery Pack you are using.  
Ambient temperature.  
How often the Zoom function is used.  
Type of use (Camcorder/Camera/With LCD Screen etc.).  
It is recommended that you have several batteries available.  
Battery Level Display  
The battery level display indicates the amount of power remaining in the Battery Pack.  
a. Fully charged  
c. 40~80% used  
b. 20~40% used  
d. 80~95% used  
e. Completely used (Blinking)  
(The Camcorder will turn off soon, change the battery as soon as possible.)  
(Blinking)  
Battery Pack Management  
I
The Battery Pack should be recharged in an environment between 32 °F (0 °C) and 104 °F (40°C).  
I
The life and capacity of the Battery Pack will be reduced if it is used in temperatures below 32 °F (0 °C) or left in  
temperatures above 104 °F (40 °C) for a long period of time, even when it is fully recharged.  
Do not put the Battery Pack near any heat source (i.e. fire or a heater).  
Do not disassemble, apply pressure to, or heat the Battery Pack.  
Do not allow the + and – terminals of the Battery Pack to be short-circuited. It may cause leakage, heat generation,  
induce overheating or fire.  
I
I
I
17  
ENGLISH  
Preparation  
Notes regarding the Battery Pack  
I
Please refer to the table on page 16 for approximate continuous recording time.  
The recording time is affected by temperature and environmental conditions.  
The recording time shortens dramatically in a cold environment. As the environmental temperature and conditions vary.  
The continuous recording times in the operating instructions are measured using a fully charged Battery Pack at 77 °F  
I
I
I
(25 °C). The remaining battery time may differ from the approximate continuous recording times given in the  
instructions.  
It is recommended you use the original Battery Pack that is available at SAMSUNG retailer.  
I
When the Battery reaches the end of its life, please contact your local dealer.  
The batteries have to be dealt with as chemical waste.  
Make sure that the Battery Pack is fully charged before starting to record.  
A brand new Battery Pack is not charged. Before using the Battery Pack, you need to charge it completely.  
Fully discharging a Lithium Ion Battery damages the internal cells.  
I
I
I
The Battery Pack may be prone to leakage when fully discharged.  
To preserve battery power, keep your Camcorder turned off when you are not operating it.  
If your Camcorder is in <Camera> mode, and it is left in <STBY> mode without being operated for more than 5 minutes  
with a tape inserted, it will automatically turn itself off to protect against unnecessary battery discharge.  
I
I
I
Make sure that the Battery Pack is fitted firmly into place.  
Do not drop the Battery Pack. Dropping the Battery Pack may damage it.  
18  
ENGLISH  
Preparation  
Connecting a Power Source  
There are two types of power source that can be connected to your Camcorder.  
-
-
The AC Power Adapter: used for indoor recording.  
The Battery Pack: used for outdoor recording.  
Using a Household Power Source  
Connect to a household power source to use the Camcorder without having to  
worry about the battery power. You can keep the Battery Pack attached; the  
battery power will not be consumed.  
Power Switch  
1. Turn the [Power] switch to [OFF].  
2. Connect the AC Power adapter (AA-E9 TYPE) to a wall socket.  
I
The plug and wall socket type may differ according to your resident country.  
3. Connect the DC cable to the DC jack of the Camcorder.  
4. Set the Camcorder to each mode by holding down the tab on the [Power]  
switch and turning it to the [CAMERA] or [PLAYER] mode.  
About the Operating Modes  
The operating modes are determined by the position of the [Power] switch and the [Mode] switch.  
Set the Operation Mode by adjusting [Power] switch and [Mode] switch before operating any functions.  
Mode Name  
<M.Player Mode>  
<Camera Mode>  
<Player Mode>  
<M.Cam Mode>  
[Power] Switch  
[Mode] Switch  
(VP-D375W(i)/  
D975W(i) only)  
M.Cam Mode : Memory Camera Mode / M.Player Mode : Memory Player Mode  
The <M.Cam Mode> and the <M.Player Mode> are only enabled on VP-D375W(i)/D975W(i).  
19  
ENGLISH  
Preparation  
Using the QUICK MENU  
QUICK MENU is used to access camcorder functions by using the [Q.MENU] button.  
QUICK MENU provides easier access to frequently used menus without using the [MENU] button.  
Functions available using the QUICK MENU are as below:  
Camera Mode  
Q.MENU  
I
Setting the Back Light Compensation (BLC) page 57  
I
Setting the Digital Image Stabilizer (DIS) page 56  
I
Programmed Automatic Exposure Modes (Program AE) page 48  
Setting the White Balance (White Balance) page 50  
Setting the Shutter Speed (Shutter)- Can only be operated by using the QUICK MENU  
page 46  
Setting the Exposure (Exposure)- Can only be operated by using the QUICK MENU page 46  
Setting the Focus (Focus) page 47  
I
1
SP  
0:00:10  
60min  
STBY  
Off  
I
BLC  
DIS  
I
I
Program AE  
White Balance  
Shutter  
Exposure  
Focus  
M.Cam Mode (VP-D375W(i)/D975W(i) only)  
I
Setting the Back Light Compensation (BLC) page 57  
Selecting the recording Photo Size (Photo Size) page 75 (VP-D975W(i) only)  
Setting the White Balance (White Balance) page 50  
I
Q.MENU  
Exit  
I
I
3
SP  
0:00:10  
60min  
STBY  
Setting the Photo Quality (Photo Quality) page 74  
BLC  
DIS  
I
I
Setting the Exposure (Exposure)- Can only be operated by using the QUICK MENU page 46  
Setting the Focus (Focus) page 47  
Program AE  
White Balance  
Shutter  
Exposure  
Focus  
Outdoor  
M.Player Mode (VP-D375W(i)/D975W(i) only)  
I
Playing the Moving Images (MPEG) on the Memory Card (M. Play Select) page 85  
Deleting Photo Images and Moving Images (Delete) page 80  
Protection from accidental Erasure (Protect) page 79  
I
I
I
Q.MENU  
Exit  
Marking Images for Printing (Print Mark) page 88  
4
SP  
0:00:10  
60min  
STBY  
For example: Setting the White Balance  
16:9 Wide  
1. Press the [Q.MENU] button.  
The quick menu list will appear.  
2. Press the [L / M] button to select <White Balance>, then press the [OK] button.  
3. Press the [L / M] button to select desired mode <Auto>, <Indoor>, <Outdoor> or  
<Custom WB>, then press the [OK] button.  
4. To exit, press the [Q.MENU] button.  
20  
<When the Outdoor option was selected>  
ENGLISH  
Preparation  
OSD (On Screen Display) in Camera/Player Modes  
1. Battery Level page 17  
19. Remaining Tape (measured in  
OSD in Camera Mode  
minutes)  
2. Visual Effects Mode page 52  
EASY.Q page 35  
16:9 Wide page 54  
2524  
26  
20. Tape Counter  
22  
23  
21  
21. Zero Memory page 37  
1
SP  
0:00:11  
60min  
16BIt  
20  
STBY  
10Sec  
3. DIS page 56  
(VP-D375W(i)/D975W(i) only)  
Art  
2
3
19  
18  
17  
S
4. Program AE page 48  
5. White Balance Mode page 50  
6. Shutter Speed page 46  
7. Exposure page 46  
8. Manual Focus page 47  
9. Date/Time page 30  
22. Record Speed Mode page 43  
23. Operating Mode  
4
5
6
7
8
16  
No Tape !  
15  
14  
13  
12  
S. 1/50  
24. Self Timer page 38  
[20]  
(VP-D375W(i)/D975W(i) only)  
om  
W
T
11  
Color N.1/25  
9
00:00 1.JAN.2007  
25. Still image recording page 59  
26. Tele Macro page 55  
2
10  
8
16:9 Wide  
6
7
27. Dubbed Audio Playback  
S. 1/50  
[20]  
10. Zoom Position page 39  
11. COLOUR NITE pages 41  
page 64  
28. DEW page 6  
12. USB page 96  
OSD in Player Mode  
29. Volume Control page 60  
30. Message Line page 103  
31 Warning Indicator page 103  
32. DV IN (DV data transfer mode)  
page 92 (VP-D371i/D371Wi/  
D372WHi/D375Wi/D975Wi only)  
33. AV IN page 69 (VP-D371i/  
D371Wi/D372WHi/D375Wi/  
D975Wi only)  
(VP-D375W(i)/D975W(i) only)  
35  
13. Remote page 24  
(VP-D375W(i)/D975W(i) only)  
0:00:00:10  
14min  
SP  
27  
28  
14. WindCut Plus page 44  
Sound[2]  
16BIt  
15. BLC (Back Light Compensation)  
[05]  
34  
page 57  
No Tape !  
29  
16. Light page 42 (VP-D372WH(i)/  
33  
32  
AV In  
D375W(i)/D975W(i) only)  
00:00 1.JAN.2007  
17. Real Stereo page 45  
18. Audio Mode page 43  
34. Voice+ Indicator page 67  
30  
31  
35. Audio Dubbing page 63  
(VP-D375W(i)/D975W(i) only)  
[ Notes ]  
I
OSD (On Screen Display) items shown here are based on model VP-D375W.  
I
The above screen is an example for explanation; It is different from the actual display.  
21  
ENGLISH  
Preparation  
OSD (On Screen Display) in M.Cam/M.Player Modes (VP-D375W(i)/D975W(i) only)  
1. Photo Quality page 74  
2. CARD (Memory Card) Indicator  
3. Image Counter (Total number of  
recordable photo images)  
4. Image Recording and Loading  
Indicator  
5. Erase Protection Indicator page 79  
6. Print Mark page 88  
7. Folder Number - File Number  
page 76  
OSD in M.Cam Mode  
OSD in M.Player Mode  
4
3
9
46  
2
2/46  
Slide  
8
7
3 min  
800X600  
1  
152  
8
1
No Memory Card !  
No Memory Card !  
5
6
[20]  
00:00 1.JAN.2007  
001  
00:00 1.JAN.2007  
om  
100-0002  
8. Photo Size page 75 (VP-D975W(i) only)  
9. Slide Show page 78  
W
T
[20]  
[ Notes ]  
I
OSD (On Screen Display) items shown here are based on model VP-D375W.  
The above screen is an example for explanation; It is different from the actual display.  
I
Turning the OSD (On Screen Display) On/Off  
You can switch the display mode of the on-screen information to on or off by pressing the  
button.  
Turning OSD On/Off  
DISPLAY  
Press the [DISPLAY] button.  
I
Each press of the button toggles the OSD function on and off.  
When you turn the OSD off,  
I
-
In <Camera Mode>: The STBY, REC modes are always displayed on the screen, even  
when the OSD is turned off.  
-
In <Player Mode>: When you press any Function Button, it is displayed on the OSD for 3 seconds before it turns off.  
Turning the Date/Time On/Off  
To turn the Date/Time on or off, access the menu and change the <Date/Time> mode. page 30  
22  
ENGLISH  
Initial Setting : System Menu Setting  
Setting the Clock (Clock Set)  
Clock setup works in <Camera>/<Player>/<M.Cam>/<M.Player> modes. page 19  
The Date/Time is automatically recorded onto a tape. Before recording, please set  
the <Date/Time>. page 30  
4
5
Camera Mode  
System  
Clock Set  
Remote  
On  
On  
On  
English  
On  
Beep Sound  
Shutter Sound  
Language  
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
Demonstration  
OK  
MENU  
Exit  
Move  
Select  
I
The menu list will appear.  
Camera Mode  
Back  
Clock Set  
4. Press the [L / M] button to select <System>, then press the [OK] button.  
5. Press the [L / M] button to select <Clock Set>, then press the [OK] button.  
Remote  
Set Time  
I
The year will be highlighted first.  
Beep Sound  
Shutter Sound  
Language  
6. Press the [L / M] button to set current <Year>, then press the [OK] button.  
Demonstration  
I
The month will be highlighted.  
OK  
MENU  
Exit  
Move  
Select  
7. You can set the month, day, hour and minute following the same procedure after  
setting the year.  
Camera Mode  
Back  
Clock Set  
Remote  
Beep Sound  
Shutter Sound  
Language  
Demonstration  
6
8
8. Press the [OK] button after setting the minutes.  
I
1
JAN 2007  
A message <Complete !> is displayed.  
I
00 : 00  
To adjust the clock, select the Year, Month, Day, Hour or Min by pressing the  
[OK] button, then press the [L / M] button to set respective values.  
9. To exit, press the [MENU] button.  
OK  
MENU  
Adjust  
Select  
Exit  
[ Notes ]  
I
After the Lithium Battery loses its charge (after about 6 months), the date/time  
Camera Mode  
Back  
Clock Set  
appears on the screen as <00:00 1.JAN.2007>.  
I
You can set the year up to 2037.  
If the Lithium Battery is not installed, any inputted data will not be backed up.  
1
JAN 2007  
00 : 00  
Remote  
I
Beep Sound  
Shutter Sound  
Language  
Complete !  
Displays in this manual  
Demonstration  
- OSD illustrations of VP-D375W are used in this manual.  
- Some of the OSD in this manual may differ slightly from the actual items of your  
camcorder.  
OK  
MENU  
Exit  
Move  
Select  
23  
ENGLISH  
Initial Setting : System Menu Setting  
Setting the Wireless Remote Control Acceptance (Remote) (VP-D375W(i)/D975W(i) only)  
The Remote function works in <Camera>/<Player>/<M.Cam>/ <M.Player> modes.  
page 19  
The Remote function allows you to enable or disable the remote control for use with  
the Camcorder.  
1
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
2. Set the [Mode] switch to [TAPE] or [CARD].  
3. Press the [MENU] button.  
I
The menu list will appear.  
4
Camera Mode  
System  
4. Press the [L / M] button to select <System>, then press the [OK] button.  
5. Press the [L / M] button to select <Remote>, then press the [OK] button.  
6. Press the [L / M] button to select <On> or <Off>, then press the [OK] button.  
7. To exit, press the [MENU] button.  
Clock Set  
Remote  
Beep Sound  
Shutter Sound  
Language  
On  
On  
On  
English  
On  
Demonstration  
OK  
MENU  
Exit  
Move  
Select  
6
Camera Mode  
Back  
Clock Set  
Remote  
Off  
On  
[ Note ]  
Beep Sound  
Shutter Sound  
Language  
Demonstration  
If you set the <Remote> to <Off> in the menu and try to use it, the remote control icon  
(
) will blink for 3 seconds on the LCD Screen and then disappear.  
OK  
MENU  
Exit  
Move  
Select  
24  
ENGLISH  
Initial Setting : System Menu Setting  
Setting the Beep Sound (Beep Sound)  
The Beep Sound function works in <Camera>/<Player>/<M.Cam>/<M.Player> modes.  
page 19  
You can turn the Beep Sound on or off, when on, each press of a button sounds a beep.  
1
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
I
The menu list will appear.  
4
Camera Mode  
System  
4. Press the [L / M] button to select <System>, then press the [OK] button.  
5. Press the [L / M] button to select <Beep Sound>, then press the [OK] button.  
6. Press the [L / M] button to select <On> or <Off>, then press the [OK] button.  
7. To exit, press the [MENU] button.  
Clock Set  
Remote  
Beep Sound  
Shutter Sound  
Language  
On  
On  
On  
English  
On  
Demonstration  
OK  
MENU  
Exit  
Move  
Select  
6
Camera Mode  
Back  
Clock Set  
Remote  
Beep Sound  
Shutter Sound  
Language  
Off  
On  
Demonstration  
OK  
MENU  
Exit  
Move  
Select  
25  
ENGLISH  
Initial Setting : System Menu Setting  
Setting the Shutter Sound (Shutter Sound) (VP-D375W(i)/D975W(i) only)  
The Shutter Sound function works in <Camera>/<Player>/<M.Cam> modes. page 19  
You can turn the Shutter Sound on or off, when on, with each press of the [PHOTO]  
button, the Shutter will sound.  
1
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
2. If the [Power] switch to [CAMERA], set the [Mode] switch to [TAPE] or [CARD].  
If the [Power] switch to [PLAYER], set the [Mode] switch to [TAPE].  
3. Press the [MENU] button.  
I
The menu list will appear.  
4
6
Camera Mode  
System  
Clock Set  
4. Press the [L / M] button to select <System>, then press the [OK] button.  
5. Press the [L / M] button to select <Shutter Sound>, then press the [OK] button.  
6. Press the [L / M] button to select <On> or <Off>, then press the [OK] button.  
7. To exit, press the [MENU] button.  
Remote  
On  
On  
On  
English  
On  
Beep Sound  
Shutter Sound  
Language  
Demonstration  
OK  
MENU  
Exit  
Move  
Select  
Camera Mode  
Back  
Clock Set  
Remote  
Beep Sound  
Shutter Sound  
Language  
Demonstration  
Off  
On  
OK  
MENU  
Exit  
Move  
Select  
26  
ENGLISH  
Initial Setting : System Menu Setting  
Selecting the OSD Language (Language)  
The Language function works in <Camera>/<Player>/<M.Cam>/<M.Player> modes.  
page 19  
You can select the desired language to display the menu screen and the messages.  
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
1
I
The menu list will appear.  
4. Press the [L / M] button to select <System>, then press the [OK] button.  
4
Camera Mode  
System  
Clock Set  
5. Press the [L / M] button to select <Language>, then press the [OK] button.  
I
The available language options are listed.  
Remote  
On  
On  
On  
English  
On  
Beep Sound  
Shutter Sound  
Language  
I
English / Français /  
Magyar / Svenska /  
/ Deutsch / Italiano / Português / Polski / Nederlands /  
Español  
/ ‰∑¬ /  
/
/ PÛÒÒÍËÈ / ìÍ‡ªÌҸ͇ /  
/
Demonstration  
Suomi / Türkçe / Norwegian / Danish  
OK  
MENU  
Move  
Select  
Exit  
6. Press the [L / M] button to select the desired OSD language, then press the [OK] button.  
I
The OSD language is refreshed in the selected language.  
7. To exit, press the [MENU] button.  
[ Notes ]  
I
The word <Language> in the menu is always indicated in English.  
Language options may be changed without prior notice.  
I
27  
ENGLISH  
Initial Setting : System Menu Setting  
Viewing the Demonstration (Demonstration)  
The Demonstration function may only be used in the <Camera> mode without a tape  
inserted in the Camcorder. page 19  
1
Before you begin: Make sure that there is no tape inserted in the Camcorder. page 32  
Demonstration automatically shows you the major functions that are included with your  
Camcorder so that you may use them more easily.  
The Demonstration operates repeatedly until the Demonstration mode is switched Off.  
1. Set the [Power] switch to [CAMERA].  
4
6
7
Camera Mode  
System  
Clock Set  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
On  
Remote  
I
On  
Beep Sound  
The menu list will appear.  
Shutter Sound On  
English  
Language  
4. Press the [L / M] button to select <System>, then press the [OK] button.  
5. Press the [L / M] button to select <Demonstration>, then press the [OK] button.  
6. Press the [L / M] button to select <On>, then press the [OK] button.  
7. Press the [MENU] button.  
On  
Demonstration  
OK  
MENU  
Exit  
Move  
Select  
Camera Mode  
Back  
Clock Set  
I
The Demonstration will begin.  
Remote  
Beep Sound  
Shutter Sound  
Language  
Demonstration  
8. To quit the Demonstration, press the [MENU] button.  
Off  
On  
[ Notes ]  
OK  
MENU  
Exit  
Move  
Select  
I
The Demonstration function is automatically activated when the Camcorder is left idle  
for more than 10 minutes after switching to the <Camera> mode (if no tape is inserted  
SAMSUNG Camcorder is...  
34x Optical Zoom  
in the Camcorder).  
I
If you press other buttons (FADE, C.NITE, EASY.Q) during the Demonstration mode,  
the demonstration stops temporarily and resumes 10 minutes later if you do not operate  
any other functions.  
Demonstration  
28  
ENGLISH  
Initial Setting : Display Menu Setting  
Adjusting the LCD Screen (LCD Bright/LCD Colour)  
Adjusting the LCD Screen works in <Camera>/<Player>/<M.Cam>/<M.Player> modes.  
page 19  
Your Camcorder is equipped with a 2.5 inch (VP-D371(i) only) / 2.7 inch wide  
(VP-D371W(i)/D372WH(i)/D375W(i)/D975W(i) only) colour Liquid Crystal Display (LCD)  
Screen, which enables you to view what you are recording or playing back directly.  
Depending on the conditions under which you are using the Camcorder (indoors or  
outdoors for example), you can adjust;  
1
-
-
<LCD Bright>  
<LCD Colour>  
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
4
6
Camera Mode  
Display  
LCD Bright  
LCD Colour  
Date/Time  
I
Off  
On  
The menu list will appear.  
TV Display  
4. Press the [L / M] button to select <Display>, then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
5. Press the [L / M] button to select the item you want to adjust <LCD Bright> or  
<LCD Colour>, then press the [OK] button.  
Camera Mode  
Back  
[18]  
LCD Bright  
LCD Colour  
Date/Time  
TV Display  
6. Press the [L / M] button to adjust the value of the selected item <LCD Bright> or  
<LCD Colour>, then press the [OK] button.  
I
You can set values for <LCD Bright> and <LCD Colour> between <0> ~ <35>.  
OK  
MENU  
Exit  
Move  
Select  
7. To exit, press the [MENU] button.  
I
Adjusting the LCD Screen does not affect the brightness and colour of the image to  
be recorded.  
29  
ENGLISH  
Initial Setting : Display Menu Setting  
Displaying the Date/Time (Date/Time)  
The Date/Time function works in <Camera>/<Player>/<M.Cam>/<M.Player> modes.  
page 19  
The date and time are automatically recorded on a special data area of the tape.  
1
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
I
The menu list will appear.  
4
6
Camera Mode  
Display  
LCD Bright  
LCD Colour  
Date/Time  
4. Press the [L / M] button to select <Display>, then press the [OK] button.  
5. Press the [L / M] button to select <Date/Time>, then press the [OK] button.  
Off  
On  
TV Display  
6. Press the [L / M] button to select the display type of the Date/Time, then press the  
[OK] button.  
OK  
MENU  
Exit  
Move  
Select  
I
Display type of the Date/Time: <Off>, <Date>, <Time>, <Date&Time>.  
Camera Mode  
Back  
7. To exit, press the [MENU] button.  
LCD Bright  
LCD Colour  
Date/Time  
TV Display  
Off  
Date  
Time  
[ Notes ]  
I
The Date/Time will read <00:00 1.JAN.2007> in the following conditions.  
Date&Time  
-
-
-
During playback of a blank section of a tape.  
If the tape was recorded before setting the clock function in the Camcorder.  
When the Lithium Battery becomes weak or dead.  
OK  
MENU  
Exit  
Move  
Select  
I
Before you use the <Date/Time> function, you must set the clock. page 23  
30  
ENGLISH  
Initial Setting : Display Menu Setting  
Setting the TV Display (TV Display)  
The TV Display function works in <Camera>/<Player>/<M.Cam>/<M.Player> modes.  
page 19  
You can select the output path of the OSD (On Screen Display).  
-
-
<Off>: The OSD appears in the LCD Screen and Viewfinder only.  
<On>: The OSD appears in the LCD Screen, Viewfinder and TV.  
(Connecting to a TV pages 65~67)  
1
-
Use the [DISPLAY] button to turn the OSD on/off on the LCD Screen/Viewfinder/TV.  
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
4
6
Camera Mode  
Display  
LCD Bright  
LCD Colour  
Date/Time  
I
Off  
On  
The menu list will appear.  
TV Display  
4. Press the [L / M] button to select <Display>, then press the [OK] button.  
OK  
MENU  
Move  
Select  
Exit  
5. Press the [L / M] button to select <TV Display>, then press the [OK] button.  
Camera Mode  
Back  
LCD Bright  
LCD Colour  
Date/Time  
TV Display  
6. To activate TV Display function, press the [L / M] button to select <On> or <Off>,  
then press the [OK] button.  
Off  
On  
7. To exit, press the [MENU] button.  
OK  
MENU  
Exit  
Move  
Select  
31  
ENGLISH  
Basic Recording  
Using the Viewfinder  
You can view pictures through the viewfinder to avoid running down the battery, or to see correct images when the picture  
on the LCD screen is poor.  
In the [PLAYER] mode, the Viewfinder will work when the LCD Screen is closed.  
In the [CAMERA] mode, the Viewfinder will work when the LCD Screen is closed  
or rotated counterclockwise 180°.  
Adjusting the Focus  
The focus adjustment knob of the Viewfinder enables individuals with vision problems  
to see clearer images.  
1. Close the LCD Screen.  
2. Use the Focus adjustment Knob of the Viewfinder to focus the picture.  
[ Caution ]  
Do not lift the camcorder with holding the viewfinder or LCD screen. It can be a cause of sudden fall.  
[ Note ]  
Viewing the sun or any strong light source through the Viewfinder for a prolonged period may be harmful, or cause  
temporary impairment.  
Inserting / Ejecting a Cassette  
When inserting a tape or closing the cassette compartment, do not  
1
3
2
4
apply excessive force, as it may cause a malfunction.  
Do not use any tape other than Mini DV cassettes.  
1. Connect a power source and slide the [TAPE EJECT] switch.  
I
The cassette door opens automatically.  
2. Insert a tape into the cassette compartment with the tape window  
facing outward and the protection tab toward the top. (Inserting a  
Cassette)  
I
Remove the cassette tape, which is automatically ejected by pulling  
the cassette out. (Ejecting a Cassette)  
3. Press the area marked [PUSH] on the cassette door until it clicks into  
place.  
I
The cassette is loaded automatically.  
4. Close the cassette door.  
32  
ENGLISH  
Basic Recording  
Various Recording Techniques  
In some situations different recording techniques may be required.  
1. General recording.  
1
2
4
2. Downward recording.  
Making a recording with a top view of the LCD Screen.  
3. Upward recording.  
Making a recording viewing the LCD Screen from below.  
4. Self recording.  
Making a recording viewing the LCD Screen from the front.  
3
5. Recording with the Viewfinder.  
In circumstances where it is difficult to use the LCD Screen,  
the Viewfinder can be used as a convenient alternative.  
5
[ Note ]  
Please rotate the LCD Screen carefully as excessive rotation  
may cause damage to the inside of the hinge that connects  
the LCD Screen to the Camcorder.  
33  
ENGLISH  
Basic Recording  
Making your First Recording  
1. Connect a power source to the Camcorder. page 19  
(A Battery pack or a AC Power adapter)  
Insert a cassette. page 32  
2
2. Remove the Lens Cover.  
3. Set the [Power] switch to [CAMERA].  
4
I
Open the LCD Screen.  
I
Set the [Mode] switch to [TAPE].  
(VP-D375W(i)/D975W(i) only)  
Make sure that <STBY> is displayed.  
If the write protection tab of the cassette is open  
I
3
(set to save), <STOP> and <Protection!> will be displayed.  
Release the write protection tab to record.  
Make sure the image you want to record appears on the LCD  
Screen or Viewfinder.  
I
I
I
1
Make sure the Battery Level indicates that there is enough remaining power for  
your expected recording time.  
You can select a Record Mode of your choice. page 43  
4. To start recording, press the [Start/Stop] button.  
I
<RECG> is displayed on the LCD Screen.  
4
SP  
0:00:10  
60min  
REC  
G
To stop recording, press the [Start/Stop] button again.  
16:9 Wide  
I
<STBY> is displayed on the LCD Screen.  
[ Note ]  
Detach the Battery Pack when you finish the recordings to prevent unnecessary battery  
power consumption.  
34  
ENGLISH  
Basic Recording  
Recording with Ease for Beginners (EASY.Q Mode)  
The EASY.Q function works only in <Camera> mode. page 19  
The EASY.Q function allows a beginner to easily make good recordings.  
1. Set the [Power] switch to [CAMERA].  
1
3
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. By pressing the [EASY.Q] button, all functions on the Camcorder will be set to off and the  
recording settings will be set to the following basic modes:  
I
The words <EASY.Q> and <DIS ( )> are displayed at the same time.  
4. Press the [Start/Stop] button to start recording.  
I
Recording will begin using the basic automatic settings.  
5. Press the [EASY.Q] button again in the STBY mode and then turn the EASY.Q mode off.  
I
The EASY.Q function will not turn off while you are recording.  
The Camcorder will return to the settings that were set prior to activating EASY.Q mode.  
I
[ Notes ]  
I
Unavailable buttons during operation  
During operation EASY.Q, the following buttons are unavailable because the items are  
automatically set. The corresponding messages may appear if unavailable operations are  
attempted.  
SP  
0:00:10  
60min  
STBY  
-
-
-
MENU button  
C.NITE button  
Q.MENU button  
I
I
The EASY.Q mode settings are deleted when the Battery Pack is removed from the  
Camcorder and must be reset when the Battery Pack is replaced.  
Taking a still image using the [PHOTO] button while EASY.Q is set releases the DIS  
function.  
35  
ENGLISH  
Basic Recording  
Reviewing and Searching a Recording (REC SEARCH)  
The REC SEARCH function works only in <Camera> mode. page 19  
Used to review previously recorded images or to find a point to record a new image in the STBY mode.  
Record Search (REC SEARCH)  
1. Set to STBY mode by pressing [Start/Stop] button.  
2. [REC SEARCH -] enables you to play the recording backwards and [REC SEARCH +]  
enables you to play it forwards, as long as you keep each button pressed down.  
I
If you press the [REC SEARCH -] button in STBY mode, your Camcorder will play  
in reverse for 3 seconds and return to the original position automatically.  
[ Notes ]  
I
Mosaic shaped distortion may appear on the screen while in Record Search mode.  
Pressing [Start/Stop] button after REC SEARCH will overwrite the images recorded after  
that point.  
I
When a cassette is loaded and the Camcorder is left in the STBY mode for more than 5 minutes without being used,  
it will switch off automatically.  
To use it again, press the [Start/Stop] button or set the [Power] switch to [OFF] and then back to [CAMERA].  
This auto power off feature is designed to save battery power.  
36  
ENGLISH  
Basic Recording  
Searching quickly for a desired scene (Setting the ZERO MEMORY) (VP-D375W(i)/D975W(i) only)  
The ZERO MEMORY function works in both <Camera> and <Player> modes. page 19  
You can mark a point on a tape that you want to return to following playback.  
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
1
2. Set the [Mode] switch to [TAPE].  
3. Press the [ZERO MEMORY] button on the remote control before the recording or during  
playback at the point where you wish to return.  
I
The time code is changed to a tape counter that is set to ZERO MEMORY with the  
<
0:00:00> (ZERO MEMORY indicator).  
I
If you want to cancel the ZERO MEMORY function, press the [ZERO MEMORY] button  
again.  
4. Finding the zero position.  
I
When you have finished playback, fast forward or rewind the tape in stop mode.  
The tape stops automatically when it reaches the zero position.  
œ
I
When you have finished recording, set the [Power] switch to [PLAYER] and press the  
[œœ (REW)] button.  
The tape stops automatically when it reaches the zero position.  
<
>
5. The tape counter with the  
changed to the time code.  
(ZERO MEMORY indicator) disappears from the display and the tape counter is  
[ Notes ]  
I
In the following situations, ZERO MEMORY mode may be canceled automatically:  
-
-
-
At the end of the section marked with the ZERO MEMORY function.  
When the tape is ejected.  
When you remove the Battery Pack or power supply.  
I
The ZERO MEMORY may not function correctly where there is a break between recordings on the tape.  
37  
ENGLISH  
Basic Recording  
Self Record using the Remote Control (Setting the Self Timer) (VP-D375W(i)/D975W(i) only)  
The SELF TIMER function works only in <Camera> mode. page 19  
When you use the SELF TIMER function on the remote control, the recording begins  
automatically in 10 seconds.  
1
1. Set the [Power] switch to [CAMERA].  
2. Set the [Mode] switch to [TAPE].  
3. Press the [SELF TIMER] button until the appropriate indicator is displayed.  
4. Press the [Start/Stop] button to start the timer.  
I
SELF TIMER starts counting down from 10 with a beep sound.  
If you want to cancel the SELF TIMER function before recording, press the [SELF  
TIMER] button.  
3
I
5. Press the [Start/Stop] button again when you wish to stop recording.  
œ
[ Notes ]  
I
Do not obstruct the remote control sensor by putting obstacles between the remote  
4
5
control and Camcorder.  
The remote control range is 4 ~5m (13 ~17 ft).  
The effective remote control angle is up to 30 degrees left /right from the centre line.  
Using a tripod (not supplied) is recommended for delayed recording.  
I
I
I
38  
ENGLISH  
Basic Recording  
Zooming In and Out  
The Zoom function works in both <Camera> and <M.Cam> modes. page 19  
Zooming is a recording technique that lets you change the size of the subject in a scene.  
You can zoom using variable zoom speeds.  
Use these features for different shots. Please note that over-use of the Zoom feature can  
lead to unprofessional looking results and a reduction of battery usage time.  
1
1
W / T button  
1. Press the [W / T] button or move [Zoom] lever slightly for a gradual zoom, move it  
further for a high-speed zoom.  
I
Your zooming is monitored on the OSD.  
2. [T] (Telephoto) side: Subject appears closer.  
3. [W] (Wide angle) side: Subject appears farther away.  
I
You can record a subject that is about 10mm (about 0.5 inch) away from the lens  
surface in the Wide position.  
Zoom lever  
TELE  
WIDE  
W
T
39  
ENGLISH  
Basic Recording  
Using the Fade In and Out  
The Fade function works only in <Camera> mode. page 19  
You can give your recording a professional look by using special  
effects such as fade in at the beginning of a sequence or fade out  
at the end of a sequence.  
3
4
5
6
SP  
STBY  
0:00:05  
60min  
To Start Recording  
SP  
REC  
REC  
G
0:00:20  
60min  
1. Set the [Power] switch to [CAMERA].  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Before recording, press and hold the [FADE] button.  
I
The picture and sound gradually disappear (fade out).  
4. Press the [Start/Stop] button and at the same time release the  
SP  
G
0:00:25  
60min  
[FADE] button.  
I
Recording starts and the picture and sound gradually appear  
(fade in).  
To Stop Recording  
SP  
STBY  
0:00:30  
60min  
5. When you wish to stop recording, press and hold the [FADE]  
button.  
I
The picture and sound gradually disappear (fade out).  
6. When the picture has disappeared, press the [Start/Stop] button  
to stop recording.  
Press and hold the [FADE] button  
a. Fade Out  
Gradual disappearance  
a. Fade Out  
(Approx. 4 seconds)  
b. Fade In  
(Approx. 4 seconds)  
Gradual appearance  
b. Fade In  
Release the [FADE] button  
40  
ENGLISH  
Basic Recording  
Using the COLOUR NITE (COLOUR NITE)  
COLOUR NITE function works only in <Camera> mode. page 19  
You can take a shot of an object in slow motion by controlling the shutter speed, or a  
brighter image in dark places without a compromise in colours.  
3
Please disable 16:9 Wide mode to use the COLOUR NITE function. page 54  
1. Set the [Power] switch to [CAMERA].  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Press the [C.NITE] button.  
<VP-D371(i)/D371W(i) only>  
3
4. Each time you press the [C.NITE] button, shutter speed is changed to;  
<Color N. 1/25>, <Color N. 1/13> and <OFF>. (VP-D371(i)/D371W(i) only)  
<Color N. 1/25>, <Color N. 1/13>, <Color N. 1/13(  
(VP-D372WH(i)/D375W(i)/D975W(i) only)  
)> and <OFF>.  
<VP-D372WH(i)/D375W(i)/D975W(i) only>  
[ Notes ]  
I
I
I
The COLOUR NITE will not turn on or off while you are recording.  
4
SP  
0:00:10  
60min  
STBY  
When using the COLOUR NITE, the image takes on a slow motion like effect.  
When using COLOUR NITE, the focus adjusts slowly and white dots may appear on the  
screen. This is not a defect.  
COLOUR NITE is not available while DIS, Photo image recording or EASY.Q is in use.  
COLOUR NITE function is not available as following functions.  
I
I
; 16:9 Wide, Program AE, Shutter, Exposure, Digital Zoom, Mosaic, Mirror, Emboss2 and  
Color N.1/25  
Pastel2  
I
If DIS is set, COLOUR NITE mode will be released.  
41  
ENGLISH  
Basic Recording  
Using the LIGHT (VP-D372WH(i)/D375W(i)/D975W(i) only)  
LIGHT function works only in <Camera> mode. page 19  
The LIGHT enables you to record a subjects in dark places without sacrificing colour.  
The LIGHT can be used with the COLOUR NITE function only.  
Please disable 16:9 Wide mode to use this function. page 54  
1
3
1. Set the [Power] switch to [CAMERA].  
2. Set the [Mode] switch to [TAPE].  
3. Press the [LIGHT] button until <Color N. 1/13(  
)> appears.  
[ Notes ]  
I
The LIGHT will not turn on or off while you are recording.  
The range of the LIGHT is limited. (up to 6.6ft (2m))  
16:9 Wide mode is not available in the LIGHT mode.  
I
I
[ Warning ]  
I
The LIGHT can become extremely hot.  
Do not touch it while in operation or soon after turning it off, otherwise serious injury may  
SP  
0:00:10  
60min  
STBY  
I
result.  
I
Do not place the Camcorder into the carrying case immediately after using the LIGHT,  
since it remains extremely hot for some time.  
Do not use near flammable or explosive materials.  
I
Color N.1/13  
42  
ENGLISH  
Advanced Recording  
Selecting the Record Mode & Audio Mode  
The Record Mode function works in both <Camera> and <Player> (DV IN or AV IN  
(VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi only)) modes. page 19  
This Camcorder records and plays back in SP (standard play) mode and in LP (long play)  
mode.  
4
6
6
7
Camera Mode  
Record  
Rec Mode  
Audio Mode  
WindCut Plus  
Real Stereo  
SP  
12Bit  
Off  
-
-
<SP> (standard play): This mode permits 60 minutes of recording time with a DVM60 tape.  
Off  
<LP> (long play): This mode permits 90 minutes of recording time with a DVM60 tape.  
The Audio Mode function works in both <Camera> and <Player> modes. page 19  
This Camcorder records sound in two ways. (12Bit, 16Bit)  
OK  
MENU  
Move  
Select  
Exit  
Exit  
Exit  
-
-
<12Bit>: You can record two 12Bit stereo sound tracks. The original stereo sound can be  
recorded onto the Main (Sound1) track. Additional stereo sound can be dubbed onto the  
Sub (Sound2) track.  
<16Bit>: You can record one high quality stereo soundtrack using 16Bit recording mode.  
Audio dubbing is not possible when using this mode.  
Camera Mode  
Back  
Rec Mode  
Audio Mode  
WindCut Plus  
Real Stereo  
SP  
LP  
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
4. Press the [/ ] button to select <Record>, then press the [OK] button.  
5. Press the [/ ] button to select <Rec Mode> or <Audio Mode>, then press the [OK] button.  
6. Press the [/ ] button to select the desired record mode or audio mode, then press the  
[OK] button.  
OK  
MENU  
Move  
Select  
Camera Mode  
Back  
Rec Mode  
Audio Mode  
WindCut Plus  
Real Stereo  
I
Record mode can be set to <SP> or <LP>.  
I
Audio mode can be set to <12Bit> or <16Bit>.  
12Bit  
16Bit  
7. To exit, press the [MENU] button. The selected icon is displayed.  
I
When <12Bit> is selected, no <12Bit> indication is displayed.  
[ Notes ]  
I
We recommend that you use this Camcorder to play back any tapes recorded on this  
OK  
MENU  
Move  
Select  
Camcorder.  
Playing back a tape recorded in other equipment may produce mosaic shaped distortion.  
SP  
0:00:10  
STBY  
I
When you record a tape in SP and LP modes, or LP mode only, the playback picture may  
16:9 Wide  
60min  
16Bit  
be distorted or the time code may not be written properly if there is a gap between scenes.  
I
Record using SP mode for best picture and sound quality.  
[ Caution ]  
I
To edit audio on your camcorder, you must set 12Bit for the Audio Mode and SP for the Rec  
Mode.  
43  
ENGLISH  
Advanced Recording  
Cutting Off Wind Noise (WindCut Plus)  
The WindCut Plus function works in both <Camera> and <Player> (Audio dubbing)  
modes. page 19  
Use the WindCut Plus when recording in windy places such as the beach or near  
buildings.  
The WindCut Plus function minimizes wind or other noises while recording.  
4
6
Camera Mode  
Record  
Rec Mode  
Audio Mode  
WindCut Plus  
Real Stereo  
SP  
12Bit  
Off  
-
When the WindCut Plus is on, some low pitched tones are eliminated along with  
the sound of the wind.  
Off  
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
OK  
MENU  
Exit  
Move  
Select  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
Camera Mode  
Back  
4. Press the [/ ] button to select <Record>, then press the [OK] button.  
5. Press the [/ ] button to select <WindCut Plus>, then press the [OK] button.  
Rec Mode  
Audio Mode  
WindCut Plus  
Real Stereo  
Off  
On  
Auto  
6. To activate the WindCut Plus function, press the [/ ] button to select <On> or  
<Auto> then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
I
<On>: Removes the low pitched wind noise.  
<Auto>: Minimizes the wind noise while preserving voices.  
I
7
STBY  
SP  
0:00:10  
60min  
16:9 Wide  
7. To exit, press the [MENU] button.  
I
WindCut Plus ( <On>  
or <Auto>  
) icon is displayed.  
[ Notes ]  
I
Make sure WindCut Plus is set to off when you want the microphone to be as  
sensitive as possible.  
WindCut Plus function is not available in USB Streaming mode.  
(VP-D375W(i)/D975W(i) only)  
I
44  
ENGLISH  
Advanced Recording  
Selecting the Real Stereo Function  
The Real Stereo function works only in <Camera> mode. page 19  
Real Stereo enhances the left and right input signals when using the internal  
microphone.  
1
1. Set the [Power] switch to [CAMERA].  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
4
6
Camera Mode  
Record  
Rec Mode  
Audio Mode  
WindCut Plus  
Real Stereo  
SP  
12Bit  
Off  
4. Press the [/ ] button to select <Record>, then press the [OK] button.  
5. Press the [/ ] button to select <Real Stereo>, then press the [OK] button.  
Off  
OK  
MENU  
Exit  
Move  
Select  
6. To activate the Real Stereo function, press the [/ ] button to select <On>, then  
press the [OK] button.  
Camera Mode  
Back  
7. To exit, press the [MENU] button.  
Rec Mode  
Audio Mode  
WindCut Plus  
Real Stereo  
I
S
Real Stereo (  
) icon is displayed.  
Off  
On  
OK  
MENU  
Exit  
Move  
Select  
7
SP  
0:00:10  
STBY  
16:9 Wide  
60min  
S
45  
ENGLISH  
Advanced Recording  
Setting the Shutter Speed & Exposure  
The Shutter Speed function works only in <Camera> mode. page 19  
The Exposure function works in both <Camera> and <M.Cam> modes. page 19  
The Shutter Speed and Exposure functions can be set in the QUICK MENU.  
1. Set the [Power] switch to [CAMERA].  
3
SP  
Off  
0:00:10  
60min  
STBY  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Press the [Q.MENU] button.  
BLC  
DIS  
Program AE  
White Balance  
Shutter  
I
Quick menu list will appear.  
4. Press the [/ ] button to select <Shutter> or <Exposure>, then press the [OK] button.  
5. Press the [/ ] button to select <Manual>, then press the [OK] button.  
6. Press the [/ ] button to select the desired shutter speed or exposure value, then press  
the [OK] button.  
Exposure  
Focus  
Q.MENU  
Exit  
I
Shutter speed can be set to <1/50>, <1/120>, <1/250>, <1/500>, <1/1000>, <1/2000>,  
<1/4000> or <1/10000>.  
SP  
0:00:10  
60min  
STBY  
5
6
I
Exposure value can be set between <00> and <29>.  
BLC  
DIS  
7. To exit, press the [Q.MENU] button.  
I
Program AE  
White Balance  
Shutter  
Selected settings are displayed.  
Recommended Shutter Speeds when Recording  
Manual  
Exposure  
Focus  
Outdoor sports such as golf or tennis: <1/2000> or <1/4000>  
Moving cars or trains or other rapidly moving vehicles such as roller coasters: <1/1000>,  
<1/500> or <1/250>  
Indoor sports such as basketball: <1/120>  
Adjusting the Exposure When Recording  
Q.MENU  
Exit  
S. 1/50  
If you set Exposure to Manual, the higher the exposure, the brighter the recorded picture will be.  
[ Notes ]  
I
If you manually change the Shutter Speed and the Exposure value when Program AE option  
is selected, manual changes are applied first.  
[20]  
I
The image may not seem as smooth when a high Shutter Speed is set.  
I
The Camcorder returns to the auto shutter and auto exposure settings when you change to  
the EASY.Q mode.  
I
When recording with a Shutter Speed of 1/1000 or higher, make sure the sun is not shining  
into the lens.  
I
The Program AE cannot be set when the Shutter Speed or the Exposure is set to manual.  
46  
ENGLISH  
Advanced Recording  
Auto Focus / Manual Focus  
The Auto Focus/Manual Focus function works in both <Camera> and <M.Cam>  
modes. page 19  
a
c
b
d
In most situations, it is better to use the automatic focus feature, as it enables  
you to concentrate on the creative side of your recording.  
Manual focusing may be necessary under certain conditions that make  
automatic focusing difficult or unreliable.  
The Auto Focus/Manual Focus function can be set in the QUICK MENU.  
Auto Focus  
If you are inexperienced in the use of Camcorders, we recommend that you  
make use of Auto Focus.  
3
SP  
Off  
0:00:10  
60min  
STBY  
Manual Focus  
BLC  
DIS  
In the following situations, you may obtain better results by adjusting the focus  
manually.  
a. A picture containing several objects, some close to the Camcorder, others further away.  
b. A person enveloped in fog or surrounded by snow.  
c. Very shiny or glossy surfaces like a car.  
d. People or objects moving constantly or quickly like an athlete or a crowd.  
Program AE  
White Balance  
Shutter  
Exposure  
Focus  
Q.MENU  
Exit  
SP  
0:00:10  
60min  
STBY  
5
6
1. Set the [Power] switch to [CAMERA].  
BLC  
DIS  
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)  
3. Press the [Q.MENU] button.  
Program AE  
White Balance  
Shutter  
I
Quick menu list will appear.  
Exposure  
Focus  
4. Press the [/ ] button to select <Focus>, then press the [OK] button.  
5. Press the [/ ] button to select <Manual>, then press the [OK] button.  
6. To exit, press the [Q.MENU] button.  
Manual  
Q.MENU  
Exit  
I
The [MF] icon and the [MF/AF] status bar will be displayed on the LCD screen.  
7. Press the [/ ] button to adjust the focus.  
[ Note ]  
om  
Manual Focus is not available in the EASY.Q mode.  
47  
ENGLISH  
Advanced Recording  
Programmed Automatic Exposure Modes (Program AE)  
The Program AE function works only in <Camera> mode. page 19  
The Program AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions.  
They give you creative control over the depth of field.  
I
A
<Auto ( )> mode  
-
-
SP  
0:00:10  
60min  
STBY  
Auto balance between the subject and the background.  
To be used in normal conditions.  
16:9 Wide  
I
I
<Sports ( )> mode  
For recording people or objects moving quickly.  
<Portrait (  
)> mode  
For focusing on the background of the subject, when the background is out of focus.  
The Portrait mode is most effective when used outdoors.  
-
-
I
I
<Spotlight (  
)> mode  
For recording correctly when there is only light on the subject and not the rest of the picture.  
<Sand/Snow (  
)> mode  
For recording when people or objects are darker than the background because of reflected light from sand or  
snow.  
I
<High Speed (  
)> (High Shutter Speed) mode  
For recording fast-moving subjects such as players in golf or tennis games.  
48  
ENGLISH  
Advanced Recording  
Setting the Program AE  
1. Set the [Power] switch to [CAMERA].  
4
6
Camera Mode  
Camera  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Auto  
Auto  
Off  
3. Press the [MENU] button.  
On  
I
The menu list will appear.  
Macro  
Off  
DIS  
Off  
M
OK  
MENU  
Exit  
Move  
Select  
4. Press the [/ ] button to select <Camera>, then press the [OK] button.  
5. Press the [/ ] button to select <Program AE>, then press the [OK] button.  
Camera Mode  
Back  
I
The available options are listed.  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Macro  
Auto  
A
Sports  
Portrait  
Spotlight  
Sand/Snow  
High Speed  
6. Press the [/ ] button to select the desired program AE option, then press the  
[OK] button.  
DIS  
M
OK  
MENU  
Exit  
Move  
Select  
7. To exit, press the [MENU] button.  
I
The icon of the selected mode is displayed.  
I
When the <Auto> mode is selected, no icon is displayed.  
7
SP  
0:00:10  
STBY  
16:9 Wide  
60min  
[ Notes ]  
I
You can directly access the Program AE function using the [Q.MENU] button.  
page 20  
I
The Program AE function will not operate in EASY.Q mode.  
The Program AE cannot be set when the Shutter Speed or the Exposure is set to  
I
manual.  
49  
ENGLISH  
Advanced Recording  
Setting the White Balance  
The White Balance function works in both <Camera> and <M.Cam> modes. page 19  
The White Balance is a recording function that preserves the unique image colour of the object in any recording  
condition.  
You may select the appropriate White Balance mode to obtain good quality image colour.  
I
A
<Auto ( )> : This mode is generally used to control the White Balance automatically.  
I
<Indoor ( )> : This controls the White Balance according to the indoor ambience.  
-
-
-
Under halogen or studio/video lighting  
Subject is of one dominant colour  
Close up  
I
I
<Outdoor ( )> : This controls the White Balance according to the outdoor ambience.  
-
In daylight, especially for close up and where the subject is of one dominant colour.  
c
<Custom WB (  
)> : You can adjust the white balance as you wish based on the shooting environment.  
1. Set the [Power] switch to [CAMERA].  
4
Camera Mode  
Camera  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)  
Auto  
Auto  
Off  
On  
Off  
3. Press the [MENU] button.  
I
The menu list will appear.  
Macro  
DIS  
Off  
M
4. Press the [/ ] button to select <Camera>, then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
5. Press the [/ ] button to select <White Balance>, then press the [OK] button.  
50  
ENGLISH  
Advanced Recording  
6. Press the [/ ] button to select the desired mode <Auto>, <Indoor>,  
6
7
Camera Mode  
Back  
<Outdoor> or <Custom WB>, then press the [OK] button.  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Macro  
I
To explain about the Custom WB:  
Auto  
A
(1) Select Custom WB and press the [OK] button. (“Set white balance” will  
appear and blinks on the screen.)  
Indoor  
Outdoor  
Custom WB  
c
(2) Place the white object under the desired lighting then press the [OK] button.  
DIS  
M
c
OK  
MENU  
Exit  
(The OSD will disappear and the Custom WB icon (  
) will be displayed.)  
Move  
Select  
7. To exit, press the [MENU] button.  
SP  
0:00:10  
60min  
STBY  
I
16:9 Wide  
When the <Auto> mode is selected, no icon is displayed.  
[ Notes ]  
I
You can directly access the White Balance function using the [Q.MENU] button.  
page 20  
<When the Outdoor option was selected>  
I
I
I
I
I
The White Balance function will not operate in EASY.Q mode.  
Turn the Digital Zoom off (if necessary) to set a more accurate white balance.  
Reset the white balance if lighting conditions change.  
During normal outdoor recording, setting to Auto may provide better results.  
Buttons other than EASY.Q button, [MENU] button, [/ ] button, [Zoom] lever and  
[OK] button will not work during setting the Custom WB.  
I
Pressing the [MENU] button while setting the Custom WB will cancel the Custom  
WB setting and sets the White Balance to Auto.  
51  
ENGLISH  
Advanced Recording  
Applying Visual Effects  
The Visual Effect function works only in <Camera> mode. page 19  
The Visual Effects enable you to give a creative look to your recording.  
Select the appropriate Visual Effect for the type of picture that you wish to record and the effect you wish to create.  
There are 10 Visual Effect modes.  
1. <Art> mode  
This mode gives the images a coarse effect.  
1
2
2. <Mosaic> mode  
This mode gives the images a mosaic effect.  
3
4
3. <Sepia> mode  
This mode gives the images a reddish-brown pigment.  
4. <Negative> mode  
This mode reverses the colours, creating a negative image.  
5
7
9
6
8
5. <Mirror> mode  
This mode cuts the picture in half, using a mirror effect.  
6. <BLK&WHT> mode  
This mode changes the images to black and white.  
7. <Emboss1> mode  
This mode creates a 3D effect (embossing).  
8. <Emboss2> mode  
This mode creates a 3D effect (embossing) on surrounding area of an image.  
10  
9. <Pastel1> mode  
This mode applies a pale pastel drawing effect to an image.  
10.<Pastel2> mode  
This mode applies a pale pastel drawing effect to surrounding area of an image.  
52  
ENGLISH  
Advanced Recording  
Selecting the Visual Effects  
1. Set the [Power] switch to [CAMERA].  
4
6
7
Camera Mode  
Camera  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
Auto  
Auto  
Off  
On  
Off  
3. Press the [MENU] button.  
Macro  
I
The menu list will appear.  
DIS  
Off  
M
OK  
MENU  
Exit  
Move  
Select  
4. Press the [/ ] button to select <Camera>, then press the [OK] button.  
5. Press the [/ ] button to select <Visual Effect>, then press the [OK] button.  
Camera Mode  
Back  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Macro  
Off  
Art  
Mosaic  
Sepia  
Negative  
Mirror  
6. Press the [/ ] button to select the desired Visual Effect option, then press the  
[OK] button.  
I
The display mode is set to the selected mode.  
DIS  
M
OK  
MENU  
Exit  
Move  
Select  
7. To exit, press the [MENU] button.  
SP  
0:00:10  
STBY  
[ Notes ]  
60min  
Art  
I
The Mosaic, Mirror, Emboss2 or Pastel2 mode is not available while DIS or COLOUR  
NITE is in use.  
I
Visual Effect modes are not available while EASY.Q is in use.  
Once DIS or COLOUR NITE is set, Mosaic, Mirror, Emboss2 or Pastel2 mode will be  
I
released.  
I
Mirror mode is not available in the 16:9 Wide mode.  
(VP-D371W(i)/D372WH(i)/D375W(i)/D975W(i) only)  
Digital Zoom is not available in the Mosaic, Mirror, Emboss2 or Pastel2 mode.  
Once Visual Effect is set, 16:9 Wide mode will be released. (VP-D371(i) only)  
I
I
53  
ENGLISH  
Advanced Recording  
Setting the 16:9 Wide mode  
The 16:9 Wide function works only in <Camera> mode. page 19  
Recordings in 16:9 Wide will play back naturally only when the TV supports 16:9 aspect ratio.  
16:9 Wide is the default setting for models VP-D371W(i)/D372WH(i)/D375W(i)/D975W(i).  
4
Camera Mode  
Camera  
1. Set the [Power] switch to [CAMERA].  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Auto  
Auto  
Off  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
On  
Macro  
DIS  
Off  
Off  
3. Press the [MENU] button.  
I
The menu list will appear.  
M
OK  
MENU  
Exit  
Move  
Select  
4. Press the [/ ] button to select <Camera>, then press the [OK] button.  
6
Camera Mode  
Back  
5. Press the [/ ] button to select <16:9 Wide>, then press the [OK] button.  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Macro  
6. To activate the 16:9 Wide function, press the [/ ] button to select <On>, then  
Off  
On  
press the [OK] button.  
DIS  
I
If you do not want to use the 16:9 Wide function, set the <16:9 Wide> menu to <Off>.  
M
OK  
MENU  
Exit  
Move  
Select  
7. To exit, press the [MENU] button.  
7
I
SP  
0:00:10  
60min  
STBY  
The selected icon is displayed.  
16:9 Wide  
[ Notes ]  
I
Digital Zoom and COLOUR NITE is not available in the 16:9 Wide mode.  
Still image recording is not available in the 16:9 Wide mode. page 59  
Once Visual Effect or DIS is set, 16:9 Wide mode will be released. (VP-D371(i) only)  
I
I
54  
ENGLISH  
Advanced Recording  
Using the Tele Macro (Macro)  
Tele Macro function works in both <Camera> and <M.Cam> mode. page 19  
Effective focal distance in Tele Macro mode is 50 Cm (19.7 inches) ~ 100 Cm (39.4 inches).  
1. Set the [Power] switch to [CAMERA].  
4
Camera Mode  
Camera  
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Auto  
Auto  
Off  
On  
Off  
3. Press the [MENU] button.  
I
The menu list will appear.  
Macro  
DIS  
Off  
4. Press the [/ ] button to select <Camera>, then press the [OK] button.  
M
OK  
MENU  
Exit  
Move  
Select  
5. Press the [/ ] button to select <Macro>, then press the [OK] button.  
6
Camera Mode  
Back  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Macro  
6. To activate the Macro function, press the [/ ] button to select <On>, then press the  
[OK] button.  
I
If you do not want to use the Macro function, set the <Macro> menu to <Off>.  
Off  
On  
DIS  
M
7. To exit, press the [MENU] button.  
OK  
MENU  
Exit  
Move  
Select  
I
Tele Macro ( ) icon is displayed.  
7
SP  
STBY  
0:00:10  
60min  
[ Notes ]  
16:9 Wide  
I
When recording in Tele Macro mode, the focus speed may be slow.  
I
When you operate the Zoom function in the Tele Macro mode, the recording subject may  
be out of focus.  
I
Use a tripod (not supplied) to prevent hand shake in the Tele Macro mode.  
Avoid shadows when recording in the Tele Macro mode.  
As the distance to the subject decreases, focusing area narrows.  
When you can not get proper focus, use the [/ ] button or [Zoom] lever.  
I
I
I
55  
ENGLISH  
Advanced Recording  
Setting the Digital Image Stabilizer (DIS)  
The DIS function works only in <Camera> mode. page 19  
DIS (Digital Image Stabilizer) is a function that compensates for any shaking or hand  
movement while holding the Camcorder (within reasonable limits).  
It provides more stable pictures when:  
-
-
-
-
Recording with the zoom (Digital Zoom is not available in the DIS mode.)  
Recording a small object close-up  
4
6
7
Camera Mode  
Camera  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Recording and walking at the same time  
Recording through the window of a vehicle  
Auto  
Auto  
Off  
On  
Off  
1. Set the [Power] switch to [CAMERA].  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
Macro  
DIS  
Off  
I
The menu list will appear.  
M
OK  
MENU  
Exit  
Move  
Select  
4. Press the [/ ] button to select <Camera>, then press the [OK] button.  
5. Press the [/ ] button to select <DIS>, then press the [OK] button.  
6. To activate the DIS function, press the [/ ] button to select <On>, then press the  
[OK] button.  
Camera Mode  
Back  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Macro  
I
If you do not want to use the DIS function, set the <DIS> menu to <Off>.  
7. To exit, press the [MENU] button.  
I
DIS (  
) icon is displayed.  
Off  
On  
DIS  
[ Notes ]  
M
I
I
You can directly access the DIS function using the [Q.MENU] button. page 20  
Digital Zoom, COLOUR NITE, Mosaic, Mirror, Emboss2 or Pastel2 is not available in the  
DIS mode.  
OK  
MENU  
Exit  
Move  
Select  
SP  
0:00:10  
60min  
STBY  
I
I
DIS function in 16:9 Wide mode may produce lower quality than in normal mode.  
(VP-D371W(i)/D372WH(i)/D375W(i)/D975W(i) only)  
16:9 Wide  
When you press the [PHOTO] button while the DIS function is enabled, the DIS will be  
released shortly and resume automatically after the still image recording.  
It is recommended that you deactivate the DIS function when using a tripod.  
If you use the DIS function, the picture quality may deteriorate.  
EASY.Q mode automatically sets the <DIS> to <On>.  
I
I
I
I
I
16:9 Wide mode is not available in DIS mode. (VP-D371(i) only)  
Once DIS is set, 16:9 Wide mode will be released. (VP-D371(i) only)  
56  
ENGLISH  
Advanced Recording  
Using Back Light Compensation Mode (BLC)  
BLC works in both <Camera> and <M.Cam> modes. page 19  
Back lighting exists when the subject is darker than the background:  
-
-
The subject is in front of a window.  
The person to be recorded is wearing white or shiny clothes and is placed  
against a bright background; the person’s face is too dark to distinguish  
his/her features.  
<BLC Off>  
<BLC On>  
-
-
-
The subject is outdoors and the background is overcast.  
The light sources are too bright.  
The subject is against a snowy background.  
3
Camera Mode  
Camera  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Auto  
Auto  
Off  
On  
Off  
1. Set the [Power] switch to [CAMERA].  
Macro  
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)  
DIS  
Off  
M
OK  
MENU  
Exit  
Move  
Select  
3. Press the [MENU] button.  
I
The menu list will appear.  
6
Camera Mode  
Back  
BLC  
4. Press the [/ ] button to select <Camera>, then press the [OK] button.  
5. Press the [/ ] button to select <BLC>, then press the [OK] button.  
6. Press the [/ ] button to select <On>, then press the [OK] button.  
Off  
On  
Digital Zoom  
7. To exit, press the [MENU] button.  
OK  
MENU  
Exit  
Move  
Select  
I
BLC icon (  
) will be displayed.  
SP  
0:00:10  
STBY  
7
[ Notes ]  
60min  
16:9 Wide  
I
I
You can directly access the BLC function using the [Q.MENU] button. page 20  
The BLC function will not operate in EASY.Q mode.  
57  
ENGLISH  
Advanced Recording  
Zooming In and Out with Digital Zoom (Digital Zoom)  
Maximum Digital Zoom works only in <Camera> mode. page 19  
Zooming more than 34x(VP-D371(i)/D371W(i)/D372WH(i)/D375W(i) only), 26x(VP-D975W(i) only) is achieved digitally,  
up to 1200x when combined with optical zoom.  
The picture quality may deteriorate depending on how much you digitally zoom in on the subject.  
Please disable 16:9 Wide mode to use this function. page 54  
Selecting the Digital Zoom  
4
Camera Mode  
Camera  
1. Set the [Power] switch to [CAMERA].  
Program AE  
White Balance  
Visual Effect  
16:9 Wide  
Macro  
Auto  
Auto  
Off  
Off  
Off  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
I
The menu list will appear.  
DIS  
Off  
M
4. Press the [/ ] button to select <Camera>, then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
5. Press the [/ ] button to select <Digital Zoom>, then press the [OK] button.  
6
6. Press the [/ ] button to select the desired zoom value <Off>, <100x>, <200x>,  
<400x> or <1200x>, then press the [OK] button.  
Camera Mode  
Back  
BLC  
Digital Zoom  
Off  
7. To exit, press the [MENU] button.  
100x  
200x  
400x  
1200x  
I
Press the [/ ] button or move the [Zoom] lever to use the Digital Zoom.  
I
The Digital Zoom indicator appears.  
OK  
MENU  
Exit  
Move  
Select  
[ Notes ]  
I
Maximum Digital zooming may result in lower picture quality.  
7
I
SP  
0:00:10  
60min  
STBY  
Digital Zoom is not available while DIS, EASY.Q, still image recording, COLOUR NITE,  
16:9 Wide, Mosaic, Mirror, Emboss2 and Pastel2 is in use.  
Once still image recording, COLOUR NITE, 16:9 Wide, EASY.Q, Mosaic, Mirror, Emboss2  
or Pastel2 is set, Digital Zoom mode will be released.  
I
(The Digital Zoom mode will be backed up.)  
Once DIS is set, Digital Zoom mode will be released.  
I
W
T
58  
ENGLISH  
Advanced Recording  
Still Image Recording  
Still image recording works only in <Camera> mode. page 19  
A tape must be inserted as still images are recorded on a tape.  
Please disable 16:9 Wide mode to use this function. page 54  
1. Set the [Power] switch to [CAMERA].  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Press the [PHOTO] button.  
I
The still image is recorded for about 6~7 seconds.  
4
6
Player Mode  
Tape  
4. After the still image has been recorded, the Camcorder returns to its previous mode.  
Photo Search  
Photo Copy  
Audio Select  
Audio Effect  
Searching for a still image  
The Photo Search works only in <Player> mode. page 19  
Sound[1]  
Off  
1. Set the [Power] switch to [PLAYER].  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Press the [MENU] button.  
OK  
MENU  
Exit  
Move  
Select  
I
The menu list will appear.  
0:41:56:10  
25min  
SP  
4. Press the [/ ] button to select <Tape>, then press the [OK] button.  
Photo Search  
5. Press the [/ ] button to select <Photo Search>, then press the [OK] button.  
I
œœ /will flicker on the LCD screen.  
6. Press the [œœ/(REW/FF)] buttons to search the still image.  
I
The photo search process appears while you are searching.  
I
After completing the search, the Camcorder displays the still image.  
I
When there are no still images recorded on the tape, it will be fully rewound or  
œœ /√√  
MENU  
Search  
Exit  
forwarded.  
7. To exit, press the [I (STOP)] or [MENU] button.  
SP  
0:44:38:03  
Photo Search  
25min  
[ Notes ]  
I
Still image recording is not available while recording.  
Photo searching...  
I
You can use still image recording by using the [PHOTO] button on the remote control.  
Pressing the [PHOTO] button on the remote control records the still image with  
automatic focusing. (VP-D375W(i)/D975W(i) only)  
I
Still image recording is not available while COLOUR NITE or 16:9 Wide is in use.  
œœ /√√  
MENU  
Search  
Exit  
I
DIS, Digital Zoom and COLOUR NITE are not available when still image recording.  
I
Still image recording while EASY.Q, DIS or Digital Zoom mode is in use will release the  
current mode. (After a still image is taken, the mode will return automatically.)  
59  
ENGLISH  
Playback  
Playing Back a Tape on the LCD Screen  
The Playback function and speaker works only in <Player> mode. page 19  
You can monitor the playback picture on the LCD Screen.  
1. Set the [Power] switch to [PLAYER].  
5 6  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Insert the tape you wish to view. page 32  
4. Open the LCD Screen.  
I
Adjust the angle of the LCD Screen and set the brightness or colour if necessary.  
5. Press the [œœ (REW)] button to rewind the tape to the starting point.  
I
To stop rewinding, press the [I (STOP)] button.  
The Camcorder stops automatically after rewinding is completed.  
I
6. Press the [❙❙ (PLAY/STILL)] button to start playback.  
I
You can view the picture you recorded on the LCD Screen.  
To stop the play operation, press the [I (STOP)] button.  
I
Adjusting the LCD Bright/LCD Colour during Playback  
You can adjust the LCD Bright/LCD Colour during playback.  
The adjustment method is the same procedure as used in <Camera> mode. page 29  
Adjusting the Volume  
When you use the LCD Screen for playback, you can hear recorded sound from the built-  
in Speaker.  
SP  
0:46:00:11  
60min  
-
Take the following steps to lower the volume or mute the sound while playing a tape on  
the Camcorder.  
[05]  
When sound is heard once the tape is in play, use the [/ ] button to adjust the  
volume.  
I
A volume level display will appear on the LCD Screen.  
Levels may be adjusted from anywhere between <00> to <19>.  
If you close the LCD Screen while playing, you will not hear sound from the speaker.  
I
I
When the Audio/Video cable is connected to the Camcorder, you cannot hear sound from  
the Built-In Speaker and cannot adjust the volume.  
60  
ENGLISH  
Playback  
Various Functions while in Player Mode  
This function works only in <Player> mode. page 19  
The [PLAY], [STILL], [STOP], [FF] and [REW] buttons are located on the Camcorder and the remote control.  
(VP-D375W(i)/D975W(i) only)  
The [F.ADV] (Frame advance), [X2] and [SLOW] buttons are located on the remote control only.  
(VP-D375W(i)/D975W(i) only)  
To prevent tape and head-drum wear, your Camcorder will automatically stop if it is left in still or slow modes for more  
than 3 minutes.  
Playback Pause  
I
Press the [❙❙ (PLAY/STILL)] button during playback.  
To resume playback, press the [❙❙ (PLAY/STILL)] button.  
I
Picture Search (Forward/Reverse)  
I
Press the [œœ (REW)] /[(FF)] buttons during playback or still mode.  
œ
To resume normal playback, press the [❙❙ (PLAY/STILL)] button.  
I
Keep pressing [œœ (REW)] / [(FF)] buttons during playback or still mode.  
To resume normal playback, release the button.  
Slow Playback (Forward/Reverse) (VP-D375W(i)/D975W(i) only)  
œ
I
Forward Slow Playback  
œ
-
-
Press the [SLOW] button on the remote control during playback.  
To resume normal playback, press the [❙❙ (PLAY/STILL)] button.  
I
Reverse Slow Playback  
<VP-D375W(i)/D975W(i) only>  
-
-
-
Press the [œ❙❙ (-)] button during forward slow play back.  
To resume forward slow playback, press the [❙❙(+)] button.  
To resume normal playback, press the [❙❙ (PLAY/STILL)] button.  
61  
ENGLISH  
Playback  
Frame Advance (To play back frame by frame) (VP-D375W(i)/D975W(i) only)  
I
Press the [F.ADV] button on the remote control while in still mode.  
-
-
Video sequence advances frame by frame each time you press the [F.ADV] button.  
The F.ADV function works in still mode only.  
I
To resume normal playback, press the [(PLAY)] button.  
-
œ
Forward frame advance.  
Press the [F.ADV] button on the remote control in still mode.  
Reverse frame advance  
-
Press the [œ❙❙ (-)] button on the remote control to change the direction in F.ADV mode.  
Press the [F.ADV] button on the remote control.  
X2 Playback (Forward/Reverse) (VP-D375W(i)/D975W(i) only)  
I
Forward X2 Playback  
-
-
Press the [X2] button on the remote control during playback.  
<VP-D375W(i)/D975W(i) only>  
To resume normal playback, press the [(PLAY)] button.  
I
Reverse X2 Playback  
-
-
Press the [œ❙❙ (-)] button during forward X2 playback.  
To resume normal playback, press the [(PLAY)] button.  
Reverse Playback (VP-D375W(i)/D975W(i) only)  
I
To playback in reverse at normal speed, press the [œ❙❙ (-)] button on the remote control during normal forward  
playback.  
Press the [(PLAY)] or [❙❙(+)] button to return to normal forward playback.  
I
[ Notes ]  
I
Mosaic shaped distortion may appear on the screen while in some of the various playback modes. Mosaic shaped  
distortion or noise may be experienced when you play back tapes recorded in LP which contain various playback  
functions.  
I
Sound will only be heard during normal SP or LP playback.  
62  
ENGLISH  
Playback  
Audio Dubbing (VP-D375W(i)/D975W(i) only)  
The Audio Dubbing function works only in <Player> mode. page 19  
You can not dub sound on a pre-recorded tape in LP or 16 bit mode.  
You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.  
Use the internal microphone or other audio equipment. (VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi only)  
The original sound will not be erased.  
1. Set the [Power] switch to [PLAYER].  
3
4
2. Set the [Mode] switch to [TAPE].  
3. Press the [❙❙ (PLAY/STILL)] button and find the time frame of the scene to be dubbed.  
4. Press the [❙❙ (PLAY/STILL)] button to pause the scene.  
5. Press the [A.DUB] button on the remote control.  
5
I
Audio Dubbing icon ( ) is displayed.  
I
The Camcorder is ready for dubbing.  
6. Press the [❙❙ (PLAY/STILL)] button to start dubbing.  
I
Press the [I (STOP)] button to stop the dubbing.  
[ Notes ]  
I
You can not use the Audio Dubbing function while playing a write protected video tape.  
To utilize an external sound source, use the Audio/Video cable to connect external sound source input.  
I
To dub an external sound source, set <AV In/Out> function to <In>. (VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi only)  
page 69  
63  
ENGLISH  
Playback  
Dubbed Audio Playback  
The dubbed Audio Playback function works only in <Player> mode. page 19  
1. Set the [Power] switch to [PLAYER].  
4
6
8
Player Mode  
Tape  
Photo Search  
Photo Copy  
Audio Select  
Audio Effect  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Insert the dubbed tape and press the [MENU] button.  
Sound[1]  
Off  
4. Press the [/ ] button to select <Tape>, then press the [OK] button.  
5. Press the [/ ] button to select <Audio Select>, then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
Player Mode  
Back  
Photo Search  
Photo Copy  
Audio Select  
Audio Effect  
6. Press the [/ ] button to select the audio playback channel, then press the [OK]  
button.  
Sound[1]  
Sound[2]  
MIX[1+2]  
I
<Sound[1]>: Plays the original sound.  
I
<Sound[2]>: Plays the dubbed sound.  
I
<MIX[1+2]>: Plays back Sound 1 and 2 equally mixed.  
OK  
MENU  
Exit  
Move  
Select  
7. To exit, press the [MENU] button.  
SP  
0:01:53:10  
20min  
Sound[2]  
8. Press the [❙❙ (PLAY/STILL)] button to playback the dubbed tape.  
[ Note ]  
When you play back added sound (Sound[2] or MIX[1+2]), you may experience a loss of  
sound quality.  
64  
ENGLISH  
Playback  
Tape Playback on TV Screen  
The Playback function works only in <Player> mode. page 19  
Playing back on a TV Monitor  
Camcorder  
To play back a tape, the television must be PAL compatible. page 101  
We recommend that you use the AC Power adapter as the power source  
for the Camcorder.  
Audio/Video  
Cable  
TV  
Signal flow  
Connecting to a TV which has Audio/Video Input Jacks  
Audio/Video  
Cable  
1. Connect the Camcorder to your TV with the Audio/Video Cable.  
I
The yellow jack: Video  
The white jack: Audio(L)-mono, The red jack: Audio(R)  
If you connect to a monaural TV, connect the yellow jack (Video) to the  
VP-D371(i)/D371W(i)/  
D372WH(i)  
VP-D375W(i)/D975W(i)  
I
I
video input of the TV and the white jack (Audio L) to the audio input of  
the TV.  
2. Set the [Power] switch to [PLAYER].  
3. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
4. Turn on the TV and set the TV/VIDEO selector on the TV to Video.  
I
Refer to the TV user’s manual.  
5. Play the tape. page 60  
[ Notes ]  
I
If you connect the cable to the AV jack, you will not hear sound from the Camcorder's speaker.  
If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).  
I
65  
ENGLISH  
Playback  
Connecting to a TV which has no Audio/Video Input Jacks  
VCR  
You can connect your Camcorder to a TV through a VCR.  
Camcorder  
1. Connect the Camcorder to your VCR with the Audio/Video Cable.  
I
Audio/Video  
Cable  
The yellow jack: Video  
The white jack: Audio(L) - Mono  
I
I
TV  
The red jack: Audio(R)  
Signal flow  
2. Connect a TV to the VCR.  
Audio/Video  
Cable  
3. Set the [Power] switch to [PLAYER].  
4. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
5. Turn on both the TV and VCR.  
Antenna  
VP-D371(i)/D371W(i)/  
D372WH(i)  
VP-D375W(i)/D975W(i)  
I
Set the input selector on the VCR to Line.  
Select the channel reserved for your VCR on the TV set.  
I
6. Play the tape.  
Playback  
1. Connect a power source and set the [Power] switch to [PLAYER].  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Insert the tape you wish to play back.  
4. Using the [œœ (REW)]/[(FF)] buttons, find the first position you wish to play back.  
5. Press the [❙❙ (PLAY/STILL)] button.  
I
The images you recorded will appear on the TV after a few seconds.  
If a tape reaches its end while being played back, the tape will rewind automatically.  
I
[ Notes ]  
I
The playback mode (SP/LP) is selected automatically.  
If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).  
I
66  
ENGLISH  
Playback  
VOICE + Function  
The Voice+ function works only in <Player> mode. page 19  
When you want to play back or record a tape-recorded movie on other AV  
device, you can transfer the voice sound incoming from the internal  
microphone of your camcorder, instead of the audio signals on a pre-  
recorded tape.  
TV  
Camcorder  
Audio/Video  
Cable  
VCR  
1. Connect the provided Audio/Video Cable to the AV Jack of the Camcorder.  
2. Connect the other end of the cable to the VCR/DVD Recorder/TV by  
matching the colours of the terminals.  
Signal flow  
Audio/Video Cable  
3. Set the [Power] switch to [PLAYER].  
VP-D371(i)/D371W(i)/  
D372WH(i)  
4. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
5. Insert the tape you wish to play back in this camcorder.  
6. Press the [Start/Stop] button on a point where you want during the playback.  
VP-D375W(i)/D975W(i)  
I
Voice+ icon (  
) is displayed on the screen and <VOICE+> will flicker on  
the screen for a while.  
I
Sound incoming from the internal microphone will be transferred to the  
connected AV device, instead of the pre-recorded sound on a tape.  
7. To cancel the function, press the [Start/Stop] button again.  
5
SP  
0:01:53:10  
60min  
[ Notes ]  
I
VOICE+ is available only when the Audio/Video cable is connected. If other cable (DV  
cable or USB cable (VP-D375W(i)/D975W(i) only)) is connected, VOICE+ function may not  
operate properly.  
If you perform [I (STOP)], [❙❙ (PLAY/STILL)], [œœ (REW)] or [(FF)] button when you  
operate Voice+ function, Voice+ function will be deactivated.  
During the VOICE+ process, the functions of [MENU] button or [PHOTO] button do not  
work.  
The VOICE+ function does not affect the original sound on the recorded tape.  
Sound is transferred from the internal microphone on this camcorder to the connected AV  
device, when using the Voice+ function. So take care that this microphone is not blocked.  
Adjust the sound volume on the connected external device. ( TV, etc.)  
Howling may occur near the speaker of an external device, please keep the camcorder at a  
distance from the external device.  
I
I
6
SP  
0:01:53:10  
60min  
I
I
Voice+  
I
I
I
Before connecting, make sure that the volume on the external device is turned down:  
forgetting this may cause howling from the external device's speakers.  
67  
ENGLISH  
Playback  
Audio Effect  
Audio Effect function works only in <Player> mode. page 19  
Audio Effect provides various playback effects to audio signals stored on a tape.  
1. Set the [Power] switch to [PLAYER].  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Insert the recorded tape and press the [MENU] button.  
4
6
Player Mode  
Tape  
Photo Search  
Photo Copy  
Audio Select  
Audio Effect  
Sound[1]  
Off  
4. Press the [/ ] button to select <Tape>, then press the [OK] button.  
5. Press the [/ ] button to select <Audio Effect>, then press the [OK] button.  
6. Press the [/ ] button to select the audio effect channel, then press the [OK] button.  
OK  
MENU  
Move  
Select  
Exit  
I
Player Mode  
Back  
Photo Search  
Photo Copy  
Audio Select  
Audio Effect  
<Voice>: Highlights the human voice.  
I
<Music>: Highlights the sound by enhancing the bass and treble.  
I
Off  
<Wide>: Magnifies the stereo effect by enhancing the left and right sounds.  
<Echo>: Gives an echo effect.  
V
M
W
E
Voice  
Music  
Wide  
Echo  
I
7. To exit, press the [MENU] button.  
OK  
MENU  
Move  
Select  
Exit  
[ Notes ]  
I
It is recommended to use stereo type output devices (TV, speakers) for better audio effects.  
Audio Effect function is not available with USB (VP-D375W(i)/D975W(i) only) or DV connection.  
I
68  
ENGLISH  
Playback  
Setting the AV In/Out (VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi only)  
AV In/Out function works only in <Player> mode. page 19  
AV In/Out setting enables you to record signals from external sources and display it on  
LCD Screen. Also, you can send your video or image to external devices to record or  
play back.  
2
1. Set the [Power] switch to [PLAYER].  
2. Set the [Mode] switch to [TAPE].  
3. Press the [MENU] button.  
I
The menu list will appear.  
4
6
Player Mode  
Record  
Rec Mode  
Audio Mode  
WindCut Plus  
AV In/Out  
4. Press the [/ ] button to select <Record>, then press the [OK] button.  
5. Press the [/ ] button to select <AV In/Out>, then press the [OK] button.  
6. Press the [/ ] button to select <Out> or <In>, then press the [OK] button.  
SP  
12Bit  
Off  
Out  
I
<Out>: Select this when copying or playing back the contents of this camcorder onto  
OK  
MENU  
Move  
Select  
Exit  
the external device.  
<In>: Select this when recording the contents of an external device to the  
I
Player Mode  
Back  
camcorder.  
Rec Mode  
Audio Mode  
WindCut Plus  
AV In/Out  
7. To exit, press the [MENU] button.  
Out  
In  
[ Notes ]  
OK  
MENU  
Exit  
Move  
Select  
I
When recording images from a VCR, playback must be at normal speed, or a gray  
image will appear on the Camcorder.  
If <AV In/Out> is set to <In>, the WindCut Plus function is not available.  
I
69  
ENGLISH  
Connection  
Copying a Camcorder Tape onto a Video Tape  
The copying function works only in <Player> Mode. page 19  
Connect your Camcorder to a VCR using the AV jack to copy the  
recording from a camcorder tape onto a VCR tape.  
Set the <AV In/Out> to <Out> before copying to an external device.  
page 69  
VCR  
Camcorder  
Audio/Video  
Cable  
1. Set the [Power] switch to [PLAYER].  
Signal flow  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Insert the tape you want to copy in your Camcorder.  
4. Insert a new video tape in your VCR.  
Audio/Video Cable  
VP-D371(i)/D371W(i)/  
D372WH(i)  
VP-D375W(i)/D975W(i)  
5. Connect the Camcorder to your VCR with the Audio/Video cable.  
I
Connect the Audio/Video cable to the input jack on your VCR.  
The yellow jack: Video  
The white jack: Audio(L)-mono  
The red jack: Audio(R)  
I
I
I
6. Press the Record button on your VCR to start recording.  
7. Play the tape on your Camcorder. Please refer to Page 60 for Playing.  
I
Set the <TV Display> to <Off> in the MENU. page 31  
When Copying is Complete  
Stop recording on your VCR, then press the [I (STOP)] button on your Camcorder.  
[ Notes ]  
I
If you operate the Camcorder connected to another device, always power the Camcorder from household AC outlet  
using the AC power adapter.  
You can also copy images to other external storage media using this camcorder.  
I
70  
ENGLISH  
Connection  
Recording (Copying) a TV Programme or Video Tape onto a Camcorder Tape (VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi only)  
The Recording (Copying) function works only in <Player> Mode.  
VCR  
page 19  
Camcorder  
Connect your Camcorder to a VCR or a TV using the AV jack to record a  
TV programme or copy a video tape onto a Camcorder tape.  
or  
Audio/Video  
Cable  
Set the <AV In/Out> to <In> before Recording (Copying). page 69  
Recording (Copying) onto a Camcorder Tape  
1. Get your TV or VCR ready.  
Signal flow  
TV  
2. Connect the Camcorder to your VCR or TV with the Audio/Video cable.  
Audio/Video Cable  
I
Connect the Audio/Video cable to the output jack on your VCR or TV  
I
The yellow jack: Video  
VP-D371(i)/D371W(i)/  
I
The white jack: Audio (L)- Mono  
The red jack: Audio (R)  
VP-D375W(i)/D975W(i)  
D372WH(i)  
I
3. Insert an empty tape in your Camcorder.  
To record from a VCR  
4. Insert the video tape to be played in your VCR.  
I
Pause at the starting point of playing.  
5. Start copying by pressing the [Start/Stop] button on your Camcorder.  
6. Press the PLAY button on your VCR to play the tape.  
To record from a TV  
4. Select a TV channel to be recorded.  
5. Start recording by pressing the [Start/Stop] button on your Camcorder.  
When Recording (Copying) is Complete:  
Press the [I (Stop)] button on your Camcorder to stop recording (copying).  
[ Notes ]  
I
If you operate the Camcorder connected to another device, always power the Camcorder from household AC outlet  
using the AC power adapter.  
The recorded contents can be played back in the same manner as when playing back images recorded on this  
camcorder.  
Copy-protected video tapes such as Macrovision or unstable TV signals cannot be recorded on this camcorder.  
I
I
71  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Using a Memory Card (Usable Memory Card) (not supplied)  
This camcorder can use SD memory cards and MMC (Multi Media Cards).  
Some cards are not compatible according to the memory card manufacturer and memory  
card type.  
The Memory Card stores and manages images recorded by the Camcorder.  
Before inserting or ejecting the Memory Card, set the [Power] switch to [OFF].  
Terminals  
Protection  
Tab  
Label  
MMC/SD  
Memory Card Functions  
Recording/Viewing Images.  
Adapter  
Protection Tab  
Protecting Images from accidental erasure. (except MMC)  
The MMC does not have a Protection Tab.  
When using the MMC, be careful not to edit or delete data by mistake.  
Deleting Images stored in Memory Card  
Marking Photo Images with Print Information  
Formatting Memory Cards  
Adapter  
RS MMC/Mini SD  
RS MMC or Mini SD should be  
inserted by using the Adapter  
(not supplied).  
Inserting a Memory Card  
1. Open the Memory Card Cover.  
2. Insert the Memory Card.  
3. Insert the Memory Card into the Slot until it softly clicks.  
4. Close the Memory Card Cover.  
Ejecting a Memory Card  
Label pasting  
portion  
1. Open the Memory Card Cover.  
2. Slightly push the Memory Card inwards to pop it out.  
3. Pull the Memory Card out of the slot and close the Memory Card Cover.  
1GB=1,000,000,000bytes; actual formatted capacity may be less as the internal firmware uses a portion of the memory.  
*
72  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
[ Notes ]  
I
Do not apply excessive force when you insert/eject the Memory Card.  
I
Do not turn the power off while recording, loading, erasing a photo image or formatting the Memory Card.  
I
Please turn the power off before you insert or eject the Memory Card to avoid losing data.  
I
Do not place the Memory Card near a strong electro-magnetic device.  
I
Do not allow metal substances to come in contact with the terminals on the Memory Card.  
I
Do not bend, drop or apply strong shock to Memory Card.  
I
After removing the Memory Card from the camcorder, keep it in a soft case to prevent static shock.  
I
The data stored on the Memory Card may be changed or lost as a result of misuse, static electricity, electric noise or  
repair. Save important images separately. Samsung is not responsible for data loss due to misuse.  
RS-MMC or Mini SD should be inserted by using the Adaptor (not supplied).  
I
I
In M.Cam or M.Player mode, the 16:9 wide mode is not supported.  
The wide mode only displays in the aspect ratio of 4:3.  
I
The Camcorder supports up to 2GB SD/MMC and lower. SD/MMC above 2GB may not record or play properly.  
Structure of Folders and Files on the Memory Card  
The photo images that you recorded are saved in JPEG file  
format on the Memory Card.  
The moving images that you recorded are saved in MPEG4 file  
format on the Memory Card.  
Each file has a file number and all files are assigned to a folder.  
DCIM  
100 SSDVC  
MSAMSUNG  
SSMOV  
DCAM 0001  
DCAM 0002  
.
.
.
.
100SSMOV  
-
A file number from DCAM0001 is sequentially assigned to each  
recorded image.  
Each folder is numbered from 100SSDVC and recorded on the  
Memory Card.  
101SSDVC  
<Photo Image>  
<Moving Image>  
-
Image Format  
Photo Image  
000-0000  
I
Images are compressed in JPEG (Joint Photographic Experts Group) format.  
The picture size is 800x600 or 1152x864 (VP-D975W(i) only). page 75  
(Tape Capture 640x480).  
File number  
Folder number  
I
Moving Image  
I
Images are compressed in MPEG 4 (Moving Picture Experts Group) format.  
The picture size is 720X576.  
I
73  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Selecting the Photo Quality  
Photo Quality function works in both <Player> and <M.Cam> modes. page 19  
You can select the quality of a photo image to be recorded.  
Select the Image Quality  
2
1. Set the [Power] switch to [CAMERA] or [PLAYER].  
2. If the [Power] switch is set to [CAMERA], set the [Mode] switch to [CARD].  
If the [Power] switch is set to [PLAYER], set the [Mode] switch to [TAPE].  
3. Press the [MENU] button.  
I
The menu list will appear.  
4. Press the [/ ] button to select <Memory>, then press the [OK] button.  
5. Press the [/ ] button to select <Photo Quality>, then press the [OK] button.  
6. Press the [/ ] button to select the desired image quality <Super Fine>, <Fine>,  
4
M.Cam Mode  
Memory  
<Normal>, then press the [OK] button.  
7. To exit, press the [MENU] button.  
Photo Quality  
File No.  
Super Fine  
Series  
I
The selected icon is displayed.  
Number of Images on the Memory Card  
Photo Size  
2GB  
128MB  
512MB  
QUALITY  
Approx. 600  
Approx. 300  
Approx. 2400  
Approx. 1200  
Approx. 9740  
Approx. 4850  
800x600  
*1152x864  
OK  
MENU  
Exit  
Move  
Select  
<Super Fine>  
Approx. 790  
Approx. 400  
Approx. 3150  
Approx. 1580  
Approx. 12800  
Approx. 6400  
800x600  
*1152x864  
5
<Fine>  
M.Cam Mode  
Back  
Super Fine  
Fine  
Normal  
Photo Quality  
File No.  
Approx. 1270  
Approx. 640  
Approx. 5070  
Approx. 2530  
Approx. 20000  
Approx. 10000  
800x600  
*1152x864  
<Normal>  
I
I
The Measured figures above are based on 800x600 Photo Size.  
* 1152X864 : VP-D975W(i) only  
OK  
MENU  
Exit  
Move  
Select  
[ Notes ]  
I
You can directly access the Photo Quality function using the [Q.MENU] button. page 20  
The number of images that can be stored on a Memory Card depends on various conditions.  
Photo images (JPEG) can be stored in the memory card up to 20,000 files.  
I
I
74  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Selecting the recording Photo Size (VP-D975W(i) only)  
Photo Size function works only in <M.Cam> mode. page 19  
You can set the photo image size to meet your needs.  
2
1. Set the [Power] switch to the [CAMERA].  
2. Set the [Mode] switch to [CARD].  
3. Press the [MENU] button.  
I
The menu list will appear  
4
5
M.Cam Mode  
Memory  
Photo Quality  
Photo Size  
File No.  
Super Fine  
1152 x 864  
Series  
4. Press the [/ ] button to select <Memory>, then press the [OK] button.  
5. Press the [/ ] button to select <Photo Size>, then press the [OK] button.  
OK  
MENU  
Exit  
6. Press the [/ ] button to select <1152 x 864> or <800 x 600>, then press the  
[OK] button.  
Move  
Select  
M.Cam Mode  
Back  
Photo Quality  
Photo Size  
File No.  
7. To exit, press the [MENU] button.  
I
The selected icon is displayed.  
1152  
800  
1152 x 864  
800 x 600  
[ Notes ]  
OK  
MENU  
Exit  
Move  
Select  
I
Photo images that are recorded at 1152X864 on your camcorder, may not playback  
properly on other digital devices that do not support this photo size.  
High resolution images use more memory than lower resolution images. Therefore  
I
the higher the resolution selected the fewer will be the number of images available.  
75  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Setting the File Number  
File Number setting works only in <M.Cam> mode. page 19  
File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.  
File numbers may be set as follows:  
-
-
<Series> : When there are existing files, the new image will be named as the next number in the sequence.  
<Reset>: When there are no files stored on the Memory Card, the file numbering starts from 0001.  
1. Set the [Power] switch to the [CAMERA].  
2. Set the [Mode] switch to [CARD].  
3. Press the [MENU] button.  
4
6
M.Cam Mode  
Memory  
Photo Quality  
File No.  
Super Fine  
Series  
I
The menu list will appear  
4. Press the [/ ] button to select <Memory>, then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
5. Press the [/ ] button to select <File No.>, then press the [OK] button.  
M.Cam Mode  
Back  
Photo Quality  
File No.  
6. Press the [/ ] button to select the desired option <Series> or <Reset>, then press  
the [OK] button.  
Series  
Reset  
7. To exit, press the [MENU] button.  
OK  
MENU  
Exit  
Move  
Select  
[ Note ]  
When you set <File No.> to <Series>, each file is assigned with a different number so as to avoid duplicating file names.  
It is convenient when you want to manage your files on a PC.  
76  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Taking a Photo Image (JPEG) on the Memory Card  
You may take photo images while in <M.Cam> mode and store the images on the Memory Card.  
page 19  
You can take photo images using the remote control.  
Audio will not be recorded with a photo image onto the Memory Card.  
1
1. Set the [Power] switch to [CAMERA].  
2. Set the [Mode] switch to [CARD].  
3. After framing your object to record, fully press the [PHOTO] button to take the picture.  
I
The picture is taken and saved into the Memory Card within a few seconds.  
Taking another picture within this interval is not possible.  
I
3
I
The <  
> indicator appears during the time it takes to save the image.  
√√√  
[ Notes ]  
I
Photo images are saved more widely than have been taken in LCD screen.  
Photo images are saved in the Memory Card in an 800x600 or 1152x864 (VP-D975W(i) only)  
format.  
The number of photo images that can be stored depends on the quality of the image.  
Photo images (JPEG) can be stored in the memory card up to 20,000 files.  
I
46  
1min  
I
I
77  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Viewing Photo Images (JPEG)  
This function works only in <M.Player> mode. page 19  
You can play back and view photo images recorded on the Memory Card.  
Be sure that the <M.Play Select> is set to <Photo> in the Menu. page 85  
1. Set the [Power] switch to [PLAYER].  
2. Set the [Mode] switch to [CARD].  
I
The last recorded image appears. If there are no recorded images on the Memory Card, <No image!> is displayed.  
To view a Single Image  
Using the [œœ/(REV/FWD)] buttons, search for the desired photo image.  
I
To view the next image: press the [(FWD)] button.  
I
To view the previous image: press the [œœ (REV)] button.  
2/46  
Slide  
I
Keep pressing [(FWD)] or [œœ (REV)] to search for an image quickly.  
800X600  
To view a Slide Show  
Press the [❙❙ (S.SHOW)] button.  
I
All images will be played back consecutively for 2~3 seconds each.  
I
The <Slide> is displayed. The Slide Show will start from the current picture.  
To stop the slide show, press the [❙❙ (S.SHOW)] button again.  
100-0002  
7/25  
To view the Multi Display  
100-0007  
To view six stored images on single screen, press the [I (MULTI)] button.  
I
A selection mark [œœ/] appears under the image.  
œ
I
Press the [œœ/(REV/FWD)] button to select an image.  
œœ  
√√  
To return to single playback mode, press the [I (MULTI)] button again.  
I
Selected picture is displayed in full screen.  
[ Notes ]  
I
Any large sized image taken with another device will be displayed as a thumbnail image.  
I
To display the previous six images, press and hold the [œœ (REV)] button for about 3 seconds.  
I
I
To display the next six images, press the [(FWD)] button for about 3 seconds.  
You can access <Delete>, <Delete All>, <Protect> or <Print Mark> functions in Multi Display view mode, using the  
[Q.MENU] button.  
78  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Protection from accidental Erasure  
The Protection function works only in <M.Player> mode. page 19  
You can protect important images from accidental erasure.  
If you format the Camcorder, all images including protected images will be erased.  
1. Set the [Power] switch to [PLAYER].  
5
M.Player Mode  
Memory  
M.Play Select  
Delete  
Delete All  
Protect  
2/46  
2. Set the [Mode] switch to [CARD].  
Photo  
I
The last recorded image appears.  
If there are no recorded images on the Memory Card, <No image!> is displayed.  
I
Off  
Print Mark  
Format  
3. Using the [œœ/(REV/FWD)] buttons, search for the photo image that you want to  
protect.  
OK  
MENU  
Exit  
Move  
Select  
7
M.Player Mode  
Back  
M.Play Select  
Delete  
2/46  
4. Press the [MENU] button.  
I
The menu list will appear.  
Delete All  
Protect  
Print Mark  
Format  
5. Press the [/ ] button to select <Memory>, then press the [OK] button.  
Off  
On  
6. Press the [/ ] button to select <Protect>, then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
7. Press the [/ ] button to select <On>, then press the [OK] button.  
8
2/46  
800X600  
8. To exit, press the [MENU] button.  
I
The protection ( ) icon is displayed.  
[ Notes ]  
I
You can directly access the Protection function using the [Q.MENU]. page 20  
If the write protection tab on the Memory Card is set to LOCK, you cannot set image  
I
100-0002  
protection.  
79  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Deleting Photo Images and Moving Images  
The Delete function works only in <M.Player> mode. page 19  
You can erase the photo images and moving images recorded on the Memory Card.  
If you want to delete protected images, you must first deactivate the image protection.  
An image which has been deleted cannot be recovered.  
5
M.Player Mode  
Memory  
M.Play Select  
Delete  
2/46  
1. Set the [Power] switch to [PLAYER].  
Photo  
Delete All  
Protect  
Print Mark  
Format  
2. Set the [Mode] switch to [CARD].  
Off  
I
The last recorded image appears.  
I
If there are no recorded images on the Memory Card, <No image!> is displayed.  
OK  
MENU  
Exit  
Move  
Select  
3. Using the [œœ/(REV/FWD)] buttons, search for the photo image that you want to  
delete.  
6
M.Player Mode  
Back  
2/46  
M.Play Select  
Delete  
Delete All  
Protect  
Print Mark  
Format  
4. Press the [MENU] button.  
I
The menu list will appear.  
5. Press the [/ ] button to select <Memory>, then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
6. Press the [/ ] button to select <Delete>, then press the [OK] button.  
7
I
2/46  
800X600  
A message <Do you want to delete?> is displayed.  
7. Press the [/ ] button to select <Yes> or <No>, then press the [OK] button.  
Do you want to delete?  
Yes  
No  
8. To exit, press the [MENU] button.  
Previous  
Next  
100-0002  
80  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Deleting All Images at Once  
6
M.Player Mode  
Back  
M.Play Select  
Delete  
2/46  
Steps from 1 to 5 are the same as described in page 80.  
Delete All  
Protect  
Print Mark  
Format  
6. Press the [/ ] button to select <Delete All>, then press the [OK] button.  
I
A message <Do you want to delete all?> is displayed.  
OK  
MENU  
Exit  
Move  
Select  
7. Press the [/ ] button to select <Yes> or <No>, then press the [OK] button.  
7
8. To exit, press the [MENU] button.  
2/46  
800X600  
Do you want to delete all?  
Yes  
No  
100-0002  
[ Notes ]  
I
You can directly access the Delete function using the [Q.MENU]. page 20  
I
When there is no stored picture on the Memory Card, the message <No image !> will be displayed.  
I
If an erroneous image file is found on the Memory Card, the message <Memory Card Error !> will be displayed.  
It may be caused by copying images from different digital devices.  
Formatting the Memory Card will delete all the stored images. page 82  
To protect important pictures from accidental deletion, activate the image protection. page 79  
Deleting all files using the <Delete All> menu may take a while.  
To delete all files much faster, format the Memory Card after backing up the files onto another storage device.  
I
I
I
81  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Formatting a Memory Card  
The Format function works only in <M.Player> mode. page 19  
You can use the Format functions to completely delete all images and options on the  
Memory Card, including protected images.  
The Format function restores the Memory Card to its initial state.  
4
M.Player Mode  
Memory  
M.Play Select  
Delete  
Delete All  
Protect  
2/46  
Attention  
Photo  
If you execute the Format function, all images will be erased completely and erased  
images cannot be recovered.  
Off  
Print Mark  
Format  
1. Set the [Power] switch to [PLAYER].  
OK  
MENU  
Exit  
Move  
Select  
2. Set the [Mode] switch to [CARD].  
3. Press the [MENU] button.  
5
6
M.Player Mode  
Back  
M.Play Select  
Delete  
Delete All  
Protect  
2/46  
I
The menu list will appear.  
4. Press the [/ ] button to select <Memory>, then press the [OK] button.  
5. Press the [/ ] button to select <Format>, then press the [OK] button.  
Print Mark  
Format  
I
A message <All files will be deleted! Do you want to format?> is displayed.  
6. Press the [/ ] button to select <Yes> or <No>, then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
I
<Complete !> is displayed when the format is completed.  
7. To exit, press the [MENU] button.  
2/46  
800X600  
[ Notes ]  
All files will be deleted !  
Do you want to format?  
I
If you execute the Format function, all photo images/moving images will be erased  
completely and erased photo images/moving images cannot be recovered.  
Formatting the Memory Card using a different device will cause Memory Card read errors.  
Do not turn the power off in the middle of the formatting.  
A Memory Card with the protection tab set to save will not be formatted. page 72  
Do not format the Memory Card on a PC.  
Yes  
No  
I
I
I
I
100-0002  
<Not formatted !> message may appear if a Memory Card formatted on a PC is inserted.  
82  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Recording Moving Images (MPEG) on a Memory Card  
You may record moving images while in <M.Cam> mode and store the images on a  
Memory Card. page 19  
1
You can record moving images with audio on a Memory Card.  
The screen format of the moving image to be recorded is 720X576.  
Saving Moving Images onto a Memory Card  
1. Set the [Power] switch to [CAMERA].  
2
3
2. Set the [Mode] switch to [CARD].  
3. Press the [Start/Stop] button, the moving images are recorded on the Memory Card in  
MPEG4.  
I
You can record a photo image on Memory Card by pressing the [PHOTO] button  
instead of the [Start/Stop] button. page 77  
4
4. Press the [Start/Stop] button to stop the recording.  
Recording time available on the Memory Card  
128MB  
256MB  
512MB  
1GB  
2GB  
Moving Image  
Approx. 8min  
Approx. 16min Approx. 32min Approx. 64min Approx. 120min  
MSAMSUNG  
SSMOV  
100SSMOV  
[ Notes ]  
I
These figures are approximate as recording capacities can be affected by variables  
such as subject matter and memory card type.  
I
The files that you recorded are saved in a following folder.  
<Moving image>  
83  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
[ Notes ]  
I
Up tp 2000 MPEG files can be stored on a memory card.  
MPEG files (Moving images) can be recorded up to 2 GB per a moving file.  
[MENU] button and [OK] button are not available while recording a moving image. To use [MENU] button and  
I
I
[OK] button, stop recording. Recording a moving image is not available when a MENU or QUICK MENU is  
displayed on the screen. To start recording, press the [MENU] button or [Q.MENU] button to make the menu  
disappear.  
I
Before using the Recording a moving image function, check whether the Memory Card is inserted into the Camcorder.  
I
Moving images that you recorded are saved in *.avi (avi 1.0) file format on the Memory Card.  
The moving images on a Memory Card are a smaller size and lower definition than images on tape.  
The sound is recorded in mono.  
The following functions are not allowed in <M.Cam> Mode. DIS (Digital Image Stabilizer), Digital Zoom, Fade,  
Program AE, Visual Effect.  
While recording on a Memory Card, don’t insert or eject the tape as it may record noise.  
While recording on a Memory Card, don’t eject the Memory Card or it may break the data on the Memory Card or  
I
I
I
I
I
Memory Card itself.  
I
Turning the power off while accessing the Memory Card may damage the data stored on the Memory Card.  
84  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Playing the Moving Images (MPEG) on a Memory Card (M.Play Select)  
The Moving Images Playback function works only in <M. Player> mode. page 19  
You can play the moving images on a Memory Card.  
The playback picture will be of higher quality if it is viewed on a PC rather than on a TV.  
1. Set the [Power] switch to [PLAYER].  
2. Set the [Mode] switch to [CARD].  
3. Press the [MENU] button.  
2
I
The menu list will appear.  
4. Press the [/ ] button to select <Memory>, then press the [OK] button.  
5. Press the [/ ] button to select <M.Play Select>, then press the [OK] button.  
6. Press the [/ ] button to select <Movie>, then press the [OK] button.  
7. To exit the menu, press the [MENU] button.  
8. Using the [œœ/(REV/FWD)] buttons, search for the moving image that you want to play back.  
I
Use the [/ ] button to adjust the volume.  
4
M.Player Mode  
Memory  
M.Play Select  
Delete  
9. Press the [❙❙ (PLAY/STILL)] button.  
2/46  
I
The moving images recorded on the Memory Card will be played back.  
Photo  
I
You can control playback using the [❙❙ (PLAY/STILL)], [œœ/(REV/FWD)] and [I (STOP)]  
buttons.  
Delete All  
Protect  
Print Mark  
Format  
Off  
[ Notes ]  
I
You can directly access the M.Play Select function using the [Q.MENU] button. page 20  
I
[MENU] button and [OK] button are not available during moving image playback. To use  
OK  
MENU  
Exit  
Move  
Select  
[MENU] button and [OK] button, stop playback.  
Moving image playback is not available when a MENU or QUICK MENU is displayed on  
the screen. To start playback, press [MENU] button or [Q.MENU] button to make it  
disappear.  
6
M.Player Mode  
Back  
M.Play Select  
Delete  
Delete All  
Protect  
Print Mark  
Format  
2/46  
Photo  
Movie  
I
I
There may be broken or mosaic pictures while playing the moving images, but it is not a  
malfunction.  
The moving images that you recorded on the Memory Card may not play on other  
manufacturer’s equipment.  
I
I
The moving images recorded by another Camcorder may not play on this Camcorder.  
To play back moving images on a PC, the Video Codec (in the CD provided with the camcorder)  
should be installed.  
OK  
MENU  
Exit  
Move  
Select  
-
You need Microsoft Windows Media Player Version 9 or higher version in order to play moving  
images on the Memory Card on your PC.  
-
You can download the Microsoft Windows Media Player with your desired language from the  
Microsoft Website,  
85  
“http://www.microsoft.com/windows/windowsmedia/download/default.asp”.  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Recording Photo Image from a Cassette  
This function works only in <Player> mode. page 19  
You can capture a frame on a tape and save it as a Photo on a Memory Card.  
1. Set the [Power] switch to [PLAYER].  
2. Set the [Mode] switch to [TAPE].  
3. Play back the cassette.  
4
4. Press the [PHOTO] button.  
I
The photo image is recorded on the Memory Card.  
During the time it takes to save an image, the playback screen is paused and the OSD  
I
SP  
2/46  
25min  
is displayed.  
Now copying...  
[ Notes ]  
I
Photo images copied from the cassette to the Memory Card are saved in 640x480 format.  
Number of images you can save varies depending on the image resolution.  
I
86  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Copying Still Images from a Cassette to a Memory Card (Photo Copy)  
The Photo Copy function works only in <Player> mode. page 19  
You can copy all still images recorded with the Photo function from the cassette to a  
4
Player Mode  
Tape  
Memory Card.  
Rewind the tape to the desired point.  
Photo Search  
Photo Copy  
Audio Select  
Audio Effect  
Sound[1]  
Off  
1. Set the [Power] switch to [PLAYER].  
OK  
MENU  
Exit  
Move  
Select  
2. Set the [Mode] switch to [TAPE].  
5
Player Mode  
Back  
Photo Search  
Photo Copy  
Audio Select  
Audio Effect  
3. Press the [MENU] button.  
I
The menu list will appear.  
4. Press the [/ ] button to select <Tape>, then press the [OK] button.  
5. Press the [/ ] button to select <Photo Copy>, then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
I
All still images recorded on the cassette tape will be copied onto a Memory Card.  
6
6. The Camcorder automatically performs the still image search to find still images and  
copy starts.  
SP  
0:44:38:03  
25min  
Photo Copy  
Photo searching...  
7. Press the [I (STOP)] button to stop copying.  
I
Copy stops when the cassette is finished or Memory Card is full.  
SP  
2/46  
Photo Copy  
25min  
[ Note ]  
Now copying...  
Still images copied from the cassette to the Memory Card are saved in 640x480 format.  
OK  
MENU  
Back  
Exit  
87  
ENGLISH  
Digital Still Camera Mode (VP-D375W(i)/D975W(i) only)  
Marking Images for Printing (Print Mark)  
The Print Mark function works only in <M.Player> mode. page 19  
This Camcorder supports the DPOF (Digital Print Order Format) print format.  
You can automatically print images recorded on a Memory Card with a printer supporting DPOF.  
There are 2 ways to make a Print Mark.  
-
<This File> : You can set a print mark on the image displayed on the LCD Screen.  
It can be set up to 999.  
5
7
9
2/46  
M.Player Mode  
Memory  
M.Play Select  
Delete  
Delete All  
Protect  
-
<All Files> : To print 1 copy each of all of the stored images.  
Photo  
1. Set the [Power] switch to [PLAYER].  
Off  
2. Set the [Mode] switch to [CARD].  
Print Mark  
Format  
I
The last recorded image appears.  
3. Using the [œœ/(REV/FWD)] buttons, search for the photo image that you want to mark.  
OK  
MENU  
Exit  
Move  
Select  
4. Press the [MENU] button.  
I
The menu list will appear.  
2/46  
002  
M.Player Mode  
Back  
M.Play Select  
Delete  
Delete All  
Protect  
5. Press the [/ ] button to select <Memory>, then press the [OK] button.  
6. Press the [/ ] button to select <Print Mark>, then press the [OK] button.  
7. Press the [/ ] button to select the desired option <All Off>, <This File> or <All Files>,  
then press the [OK] button.  
8. If you select <This File>, press the [/ ] button to select the quantity, then press the [OK]  
button.  
9. To exit, press the [MENU] button.  
All Off  
Print Mark  
Format  
This File  
All Files  
002  
MENU  
Previous  
Next  
Exit  
Removing the Print Mark  
To remove all Print Marks, select <All Off>.  
To remove an individual file’s Print Mark, select the file and set <This File> to <000>.  
2/46  
800X600  
100-0002  
[ Notes ]  
I
You can directly access the Print Mark function using the [Q.MENU] button. page 20  
I
If the Print Mark is set to <This File>, you can set the number of copies from <000> to <999>.  
If the Print Mark is set to <All Files>, you can set the number of copies to <001>.  
The <All Files> option may require extended operation time depending on the number of  
stored images.  
002  
I
I
I
DPOF supported printers are commercially available.  
88  
ENGLISH  
TM  
PictBridge (VP-D375W(i)/D975W(i) only)  
TM  
Printing Your Pictures – Using the PictBridge  
PictBridgeTM function works only in <M.Player> mode. page 19  
By connecting the Camcorder to printers with PictBridge support (sold separately),  
you can send images from the Memory Card directly to the printer with a few simple  
operations.  
With the PictBridge Support, you can control the printer directly through your  
Camcorder in order to print out stored pictures. For direct printing of your stored  
pictures using the PictBridge function, you must connect your Camcorder to a  
PictBridge printer using a USB cable.  
4
6
M.Player Mode  
System  
2/46  
Clock Set  
Remote  
On  
Beep Sound  
USB Connect  
Language  
On  
Computer  
English  
Connecting To a Printer  
OK  
MENU  
Exit  
Move  
Select  
1. Turn your printer's power off.  
I
Turn your Camcorder on by setting the [Power] switch to [PLAYER].  
2/46  
M.Player Mode  
Back  
2. Set the [Mode] switch to [CARD].  
Clock Set  
Remote  
Beep Sound  
USB Connect  
Language  
3. Press the [MENU] button.  
I
The menu list will appear.  
Computer  
Printer  
4. Press the [/ ] button to select <System>, then press the [OK] button.  
5. Press the [/ ] button to select <USB Connect>, then press the [OK] button.  
6. Press the [/ ] button to select <Printer>, then press the [OK] button.  
OK  
MENU  
Exit  
Move  
Select  
I
<Computer> : Connect to a computer.  
I
<Printer> : Connect to a printer. (To use the PictBridge function, connect to a  
printer.)  
7. Connect your Camcorder to the printer using the provided USB cable.  
8. Turn your printer power on.  
I
The PictBridge menu screen appears automatically after a short period.  
The cursor highlights <Print>.  
I
89  
ENGLISH  
TM  
PictBridge (VP-D375W(i)/D975W(i) only)  
Selecting Images  
1. In the <PictBridge> settings menu, press the [œœ/(REV/FWD)] buttons to select an  
image to print.  
2/46  
02  
M.Player Mode  
Print  
Copies  
Date/Time  
Num.  
Setting the Number of Prints  
2. Press the [/ ] button to select <Copies>, then press the [OK] button.  
3. Press the [/ ] button to set the number of prints, then press the [OK] button.  
Previous  
Next  
100-0002  
2/46  
Setting the Date/Time Imprint Option  
4. Press the [/ ] button to select <Date/Time>, then press the [OK] button.  
M.Player Mode  
5. Press the [/ ] button to select the Date/Time display type, then press the [OK] button.  
Print  
Copies  
Date/Time  
I
Date/Time display type: <Off>, <Date>, <Time>, <Date&Time>  
Off  
Date  
Time  
Printing Images  
Press the [/ ] button to select <Print>, then press the [OK] button, and selected image  
files will be printed.  
Date&Time  
Previous  
Next  
100-0002  
Canceling the Printing  
2/46  
To cancel the image printing, press [OK] button again.  
The message “Cancel” appears and the image printing will be canceled.  
M.Player Mode  
Print  
Copies  
Date/Time  
[ Notes ]  
I
The Date/Time Imprint Option may not be supported by all printers. Check with your printer  
manufacturer. The <Date/Time> menu cannot be setup if the printer does not support this  
option.  
Previous  
Next  
100-0002  
The PictBridgeTM is a registered trademark of CIPA (Camera & Imaging Products  
I
Association), an image transfer standard developed by Canon, Fuji, HP, Olympus, Seiko Epson, and Sony.  
PictBridge supporting printers are commercially available.  
I
I
I
Use the USB cable provided with the Camcorder.  
Use the AC power adapter for your Camcorder during PictBridge Direct Printing. Turning your Camcorder off during  
printing might damage data on the Memory Card.  
Printing photo images is supported. Moving images are not available for printing.  
You can set various printing options depending on the printer.  
Please refer to the user’s manual of the printer for details.  
I
I
I
90  
ENGLISH  
IEEE 1394 Data Transfer  
Transferring IEEE1394 (i.LINK)-DV Standard Data Connections  
Connecting to a DV Device (DVD Recorder, Camcorder, etc.)  
I
Connecting to other standard DV products.  
-
-
A standard DV connection is quite simple.  
If a product has a DV jack, you can transfer data by connecting to the DV jack using the correct cable. (not supplied)  
!!! Please be careful since there are two types of DV jacks (4pin, 6pin). This Camcorder has a 4pin jack.  
I
With a digital connection, video and audio signals are transmitted in digital format, allowing high quality images to be  
transferred.  
Connecting to a PC  
I
If you want to transmit data to a PC, you must install an IEEE 1394 add-on card into the PC. (not supplied)  
The frame rate for moving images is dependent on the capacity of the PC.  
I
System Requirements  
CPU : faster Intel® Pentium III™ 450MHz compatible.  
Operating system : Windows® 98SE, ME, 2000, XP, VISTA(32bit), Mac OS (9.1~10.4)  
Main memory : more than 64 MB RAM  
I
I
I
I
IEEE1394 add-on card or built in IEEE1394 card  
[ Notes ]  
I
Operation is not guaranteed for all the recommended computer environments mentioned above.  
I
I
IEEE 1394 is an international standard standardized by the Institute of Electrical and Electronics Engineers.  
DV device that does not complies with the DV standard specification may not supported.  
Refer to the product documentation of the device to be connected for further details on notes and compatible software  
applications.  
91  
ENGLISH  
IEEE 1394 Data Transfer  
Recording with a DV Connection Cable (VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi only)  
Models with a ‘i’ suffix do feature DV(IEEE1394)/AV(Analog) In.  
1. Set the [Power] switch to [PLAYER].  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
3. Connect the DV cable (not supplied) from the DV jack of the Camcorder to  
the DV jack of the other DV device.  
I
Make sure that  
is displayed.  
4. Press the [Start/Stop] button to begin REC PAUSE mode.  
I
<PAUSE> is displayed.  
5. Start playback on the other DV device while you monitor the picture.  
VP-D371(i)/D371W(i)/  
D372WH(i)  
VP-D375W(i)/D975W(i)  
6. Press the [Start/Stop] button to start recording.  
I
If you want to pause recording momentarily, press the [Start/Stop]  
button again.  
7. To stop recording, press the [I (STOP)] button.  
[ Notes ]  
I
When you transmit data from the Camcorder to another DV device, some functions may not work. If this occurs, please  
reconnect the DV cable or turn the power OFF and ON again.  
When you transmit data from the Camcorder to PC, PC function button is not available in <M.Player> mode.  
Do not use another DV device when using IEEE1394.  
Do not connect the Camcorder to a PC using both DV and USB (VP-D375W(i)/D975W(i) only) cables. It may not  
operate properly.  
I
I
I
I
I
I
I
I
The IEEE1394 cable (DV cable) is sold separately.  
Moving image software is commercially available.  
Most DV enabled PCs have a 6 pin jack. In this case, a 6pin/4pin cable is required for the connection.  
Most DV enabled Notebooks and Laptops have a 4 pin socket. Use a 4pin/4pin cable for the connection.  
DIS and COLOUR NITE features are not available when in DV (IEEE1394) mode. If DV (IEEE1394) mode is set, DIS  
and COLOUR NITE modes will be released.  
Search (Forward/Reverse) is not available when in DV (IEEE1394) mode.  
When using this Camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however recorded  
pictures will not be affected.  
I
I
92  
ENGLISH  
USB Interface (VP-D375W(i)/D975W(i) only)  
Using USB Interface  
Transferring a Digital Image through a USB Connection  
The Camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)  
You can transfer a recorded file on a Memory Card to your PC via a USB connection.  
If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0)  
supplied with the Camcorder.  
USB Connection Speed depending on the System  
High speed USB connection is supported by Microsoft (Windows) device drivers only.  
I
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.  
I
Windows XP - High speed USB on a system with Service Pack 1 or later installed.  
I
Windows VISTA - High speed USB on a system with Service Pack 1 or later installed.  
System Requirements  
Windows System  
CPU  
Intel® Pentium 4™ , 2GHz  
Windows® 2000/XP/VISTA(32bit)  
* Standard installation is recommended.  
Operation may not assured if the above OS has been upgraded.  
512MB  
OS(Operating System)  
Memory  
HDD capacity  
Resolution  
USB  
2GB or more  
1024 x 768 dots 24bit Colour  
USB2.0 High Speed  
USB interface is not supported on Windows® VISTA(64bit) and Macintosh operating systems.  
System requirements mentioned above are recommendations. Even on a system that satisfies the requirements may not ensure the  
operation depending on the system.  
I
I
[ Notes ]  
I
On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.  
I
I
I
I
I
I
I
On a slower PC than recommended, movie playback may skip frames or operate unexpectedly.  
Intel® Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation.  
Windows® is a registered trademark of the Microsoft® Corporation.  
All other brands and names are property of their respective owners.  
Operations are not guaranteed for all of the recommended computer environments mentioned above.  
Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.  
In <M.Cam> or <M.Player> mode, be sure that the Memory Card is inserted into Camcorder before connecting USB cable.  
If no Memory Card or an unformatted Memory Card is inserted, PC will not recognize your Camcorder as a removable disk.  
USB Streaming requires Video Codec, DV Driver and DirectX 9.0.  
I
I
I
If you disconnect the USB cable from the PC or the Camcorder during the data transfer, the data transfer will stop and the data may be damaged.  
If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work  
properly. If this occurs, remove all other USB devices and try the connection again.  
93  
ENGLISH  
USB Interface (VP-D375W(i)/D975W(i) only)  
Selecting the USB Device (USB Connect)  
USB Connect function works only in <M.Player> mode. page 19  
Using the USB cable, you can connect your Camcorder to a computer to copy your  
moving images and photo images from the Memory Card, or to a printer to print your  
images.  
1
1. Set the [Power] switch to [PLAYER].  
2. Set the [Mode] switch to [CARD].  
3. Press the [MENU] button.  
I
The menu list will appear.  
4. Press the [/ ] button to select <System>, then press the [OK] button.  
4
6
2/46  
M.Player Mode  
System  
Clock Set  
5. Press the [/ ] button to select <USB Connect>, then press the [OK] button.  
Remote  
On  
On  
Beep Sound  
USB Connect  
Language  
6. Press the [/ ] button to select <Computer> or <Printer>, then press the [OK]  
button.  
Computer  
English  
I
You can select <Computer> to use the Camcorder as a PC Camera, USB Stream  
OK  
MENU  
Exit  
Move  
Select  
or removable disk.  
I
You can select <Printer> to use the Pictbridge feature. page 89  
M.Player Mode  
Back  
2/46  
Clock Set  
Remote  
7. To exit, press the [MENU] button.  
Beep Sound  
USB Connect  
Language  
Computer  
Printer  
OK  
MENU  
Exit  
Move  
Select  
94  
ENGLISH  
USB Interface (VP-D375W(i)/D975W(i) only)  
Installing DV Media PRO Program  
To play back moving images recorded by the Camcorder or streaming data transferred through the USB connection on  
a PC, the Video Codec program should be installed.  
Do not connect the Camcorder to PC before installing the program.  
If another Camcorder or scanner is connected, please disconnect it in advance.  
This explanation is based on Windows® 2000 OS.  
DV Media Pro User's Manual is included on the accompanying CD(D:/help/) in Adobe's Portable Document Format (PDF).  
(The Acrobat Reader is a freeware product of AdobeSystems,Inc.)  
DV Media Pro User’s Manual is in English.  
Program Installation  
1. Insert the software CD into the CD-ROM drive of your computer.  
I
Installation selection screen appears.  
2. If the installation selection screen does not appear after inserting the CD, click “Run” in the Windows “Start” menu and  
execute Autorun.exe file to begin installation. When CD-ROM drive is set to “D:drive”, type “D:/autorun.exe” and press  
Enter.  
3. Click the icons listed below to install the selected software.  
I
DV Driver Click  
- PC CAMERA & USB STREAMING Driver (CAPTURE DRIVER)  
- Connect a Camcorder to your PC to complete the DV Driver installation.  
1) This function works only in Camera mode.  
2) Connect the camcorder to the PC using the USB cable.  
3) The SAMSUNG A/V Capture driver installation begins on the PC.  
DirectX 9.0 Click  
I
I
Video Codec Click  
The Video Codec needs to be installed in order to play the moving images (stored in the Memory Card) on a PC or  
to use the USB Streaming/PC Camera functions.  
95  
ENGLISH  
USB Interface (VP-D375W(i)/D975W(i) only)  
Connecting to a PC  
1. Connect a USB cable to the USB jack on the PC.  
I
If a USB cable is connected to the Camcorder's USB jack, the  
Audio/Video Cable is disabled.  
2. Connect the other end of the USB cable into the USB jack on the  
Camcorder. (USB jack)  
I
If PC is connected with the USB to the Camcorder, only the [Power]  
switch, [Mode] switch, [Zoom] lever can be operated.  
Disconnecting the USB Cable  
After completing the data transmission, you must disconnect the cable in the following way:  
1. Select the removable disc icon and click the right mouse button to select <Eject>.  
2. Select <Confirm> and disconnect the USB cable when the Windows Splash screen appears.  
[ Notes ]  
I
If you disconnect the USB cable from the PC or the Camcorder while transferring, the data transmission will stop and  
the data may be damaged.  
I
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB  
devices, the Camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the  
Camcorder.  
96  
ENGLISH  
USB Interface (VP-D375W(i)/D975W(i) only)  
Using the PC Camera Function  
This function works only in <Camera> mode. page 19  
To use the PC Camera function, DV Driver, Video Codec and DirectX 9.0 programs must be installed in the PC.  
When you connect to a Web site that provides video chatting functions, you can use your Camcorder to participate.  
When using this camcorder for video conferencing (such as Net Meeting), voice communication may not be supported  
depending on the video conferencing software. In this case, connect an external microphone to the soundcard of the  
PC to enable voice communication.  
Using the Camcorder with PC Net Meeting program installed, you can participate in video conference.  
The PC Camera's screen size (Transferred video frame rate for the PC Camera function is max 12.5 fps.)  
-
640X480 (VGA) pixels for USB 2.0 connection.  
If PC is connected with the USB to the Camcorder, only the [Power] switch, [Mode] switch, [Zoom] lever and [W / T]  
Button can be operated.  
1
1. Set the [Power] switch to [CAMERA].  
2. Set the [Mode] switch to [TAPE].  
3. Connect one end of the USB cable to the USB jack on the Camcorder and the other end  
to the USB connector on your computer.  
2
97  
ENGLISH  
USB Interface (VP-D375W(i)/D975W(i) only)  
Using the USB Streaming Function  
This function works in both <Camera> and <Player> modes. page 19  
To use USB streaming, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC.  
You can view Camcorder video on your PC using USB streaming.  
You can also store it as a moving image in the "avi" file format, or as a photo image in the "jpg" file format on a PC.  
1. Set the [Power] switch to [CAMERA] or [PLAYER], set the [MODE] switch to [TAPE].  
2. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB jack on your  
computer.  
3. Setup and execute Windows Movie Maker or the Ulead VIDEO Studio Software application provided on the CD.  
I
For detailed instructions for Ulead VIDEO Studio use, refer to the program’s Help function.  
Windows Movie Maker is used for Windows® XP users. (C:/program files/Movie maker/moviemk.exe)  
I
Using the removable Disk Function  
You can easily transfer data from a Memory Card to a PC without additional cards via a USB connection.  
1. Set the [Power] switch to [CAMERA] or [PLAYER], set the [Mode] switch to [CARD].  
2. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB jack on your  
computer.  
3. To verify whether the removable disk has been properly recognized, open Windows Explorer and locate the removable  
disk.  
98  
ENGLISH  
Maintenance  
After Finishing a Recording  
At the end of a recording you must remove the power source.  
When recording with a Battery Pack, leaving the pack on the Camcorder can reduce the life  
span of the battery.  
1
3
The Battery Pack should be release after recording is completed.  
1. Open the Cassette door while sliding the [TAPE EJECT] switch in the direction or the arrow.  
I
Pull the cassette compartment out automatically.  
Please wait while the tape is completely ejected.  
I
2. After removing the tape, close the door and store the Camcorder in a dust free environment.  
Dust and other foreign materials can cause square-shaped noise or jerky images.  
3. Set the [Power] switch to the [OFF].  
4. Disconnect the power source or remove the Battery Pack. Press the [BATTERY RELEASE]  
switch located on the bottom of the Camcorder and slide the Battery Pack in the direction of  
the arrow.  
Usable Cassette Tapes  
When you have recorded something that you wish to keep, you can protect it so that it will not  
be accidentally erased.  
a. Protecting a tape: Push the safety tab on the cassette so that the hole is uncovered.  
b. Removing the tape protection:  
If you no longer wish to keep the recording on the cassette, push the safety tab back so that  
it covers the hole.  
SAVE  
a
b
REC  
How to store a tape  
a. Avoid places with magnets or magnetic interference.  
b. Avoid humidity and dust prone places.  
c. Keep the tape in an upright position and avoid storing it in direct sunlight.  
d. Avoid dropping or knocking your tapes.  
99  
ENGLISH  
Maintenance  
Cleaning and Maintaining the Camcorder  
Cleaning the Video Heads  
To ensure normal recording and clear pictures, clean the video heads when the playback pictures display square block-  
shaped noise or distortion, or a blue screen appears.  
1. This function works only in <Player> mode. page 19  
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)  
(blue screen)  
3. Insert a cleaning tape.  
4. Press the [❙❙ (PLAY/STILL)] button.  
5. Press the [I (STOP)] button after 10 seconds.  
[ Notes ]  
I
Check the quality of the picture using a videocassette.  
- If the picture quality has not improved, repeat the operation.  
Clean the video heads with a dry type cassette cleaner.  
Some cleaning cassette products stop automatically. Refer to the cleaning cassette’s instructions for detailed  
I
I
information. If the problem continues after the cleaning, consult your nearest Samsung dealer or Authorized Service  
Centre. (blue screen)  
100  
ENGLISH  
Maintenance  
Using Your Camcorder Abroad  
Each country or region has its own electric and colour systems.  
Before using your Camcorder abroad, check the following items.  
Power sources  
I
You can use your Camcorder in any country or area with the supplied AC Power adapter within 100V to 240V, 50/60 Hz.  
Use a commercially available AC jack adapter, if necessary, depending on the design of the local wall outlet.  
I
Colour system  
You can view your recording in the Viewfinder.  
However, to view it on a television or copy it to a videocassette recorder, the television or VCR must be PAL-compatible  
and have the appropriate audio/video jacks. Otherwise, you may need to use a transcoder.  
PAL-compatible Countries/Regions  
Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece,  
Great Britain, Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait, Libya, Malaysia, Mauritius, Norway, Romania,  
Saudi Arabia, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, etc.  
NTSC-compatible Countries/Regions  
Bahamas, Canada, Central America, Japan, Korea, Mexico, Philippines, Taiwan, United States of America, etc.  
[ Note ]  
You can make recordings with your Camcorder and view pictures on the LCD Screen from anywhere in the world.  
101  
ENGLISH  
Troubleshooting  
Troubleshooting  
Before contacting a Samsung authorized service centre, perform the following simple checks.  
They may save you the time and expense of an unnecessary call.  
Self Diagnosis Display  
Display  
Blinking  
slow  
slow  
no  
Informs that...  
Action  
The Battery pack is almost discharged.  
Change to a charged one.  
Tape end!  
Tape end!  
No Tape!  
When the remaining time on the tape is about 2 minutes. Prepare a new one.  
The tape reached its end.  
Change to a new one.  
Insert a tape.  
slow  
slow  
slow  
There is no tape in Camcorder.  
Protection!  
The tape is protected from recording.  
The Camcorder has some mechanical fault.  
If you want to record, release the protection.  
....D  
L
C
1. Eject the tape.  
2. Set to OFF.  
3. Detach the battery.  
4. Reattach the battery.  
R
* If unresolved contact your local Samsung service centre.  
slow  
Moisture condensation has formed in the Camcorder.  
see below.  
Moisture Condensation  
I
If the Camcorder is brought directly from a cold place to a warm place, moisture may condense inside the Camcorder,  
on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the  
unit may not operate correctly.  
To prevent possible damage under these circumstances, the Camcorder is fitted with a moisture sensor.  
I
If there is moisture inside the Camcorder,  
(DEW) is displayed.  
If this happens, none of the functions except cassette ejection will work.  
Open the cassette compartment and remove the Battery.  
Leave the Camcorder for at least two hours in a dry warm room.  
102  
ENGLISH  
Troubleshooting  
Self Diagnosis Display in M.Cam/M.Player Modes (VP-D375W(i)/D975W(i) only)  
Display  
Blinking  
slow  
Informs that...  
Action  
No Memory Card !  
Memory full !  
There is no Memory Card in the Camcorder.  
There is not enough memory to record.  
Insert a Memory Card.  
Change to a new Memory Card.  
Erase recorded image.  
slow  
Record new images.  
No image !  
Write protect !  
Protect !  
slow  
slow  
slow  
slow  
There are no images recorded on the Memory Card.  
The Memory Card is record protected.  
When you try to delete to protected image.  
The Camcorder can not playback.  
Release the write protect tab on the Memory Card.  
Cancel the protection of image.  
Read error !  
Format a Memory Card or insert Memory Card recorded  
on this Camcorder.  
Write error !  
slow  
slow  
slow  
slow  
Format a Memory Card or change to a new Memory Card.  
Format a Memory Card. (see page 82)  
Wait until delete has been finished.  
The Camcorder can not record.  
The Memory Card needs to format.  
When progressing file delete.  
Not formatted !  
Now deleting...  
If inserted Memory Card is not recognized by the  
Camcorder.  
Memory Card  
Error !  
Eject and re-insert the memory card  
Try another Memory Card  
103  
ENGLISH  
Troubleshooting  
If these instructions do not solve your problem, contact your nearest Samsung authorized service centre.  
Symptom  
Explanation/Solution  
Check the Battery pack or the AC Power adapter.  
You cannot switch the Camcorder on.  
Start/Stop button does not operate while recording.  
Check the Power switch is set to CAMERA.  
You have reached the end of the cassette.  
Check the record protection tab on the cassette.  
The Camcorder shuts off automatically.  
Charge runs out quickly.  
You have left the Camcorder set to STBY for more than 5 minutes without using it.  
The Battery pack is fully exhausted.  
The atmospheric temperature is too low.  
The Battery pack has not been charged fully.  
The Battery pack is completely dead, and cannot be recharged, Use another Battery pack.  
You see a blue screen during playback.  
The video heads may be dirty.  
Clean the head with a cleaning tape.  
A vertical strip appears on the screen when  
recording a dark background.  
The contrast between the subject and the background is too great for the Camcorder to  
operate normally. Make the background bright to reduce the contrast or use the BLC  
function while you are recording in bright Surroundings.  
The Viewfinder lens has not been adjusted.  
The image in the Viewfinder is blurred.  
Adjust the Viewfinder control lever until the indicators displayed on the Viewfinder come  
into sharp focus.  
Check the Manual Focus menu.  
Auto focus does not work in the Manual Focus mode.  
Auto focus does not work.  
Check the Power switch. Set the Power switch to PLAYER.  
You have reached the beginning or end of the cassette.  
Play, FF or REW button does not work.  
You see a mosaic pattern during playback search.  
This is normal operation and it is not a failure or defect.  
The tape may be damaged. Replace the tape.  
Cleaning the video heads (see page 100).  
104  
ENGLISH  
Troubleshooting  
Setting menu items  
Available Mode  
Main Menu  
Sub Menu  
Functions  
Page  
.
.
Player  
Camera  
M Cam ! M Player !  
Camera  
Program AE  
Selecting the Program AE Function  
Setting the White Balance  
48, 49  
50  
White Balance  
Visual Effect  
16:9 Wide  
Macro  
Setting the Digital special effect  
Setting the 16:9 Wide Function  
Setting the Macro Function  
52, 53  
54  
55  
DIS  
Selecting the Digital Image Stabilizing  
Setting the BLC Function  
56  
BLC  
57  
Digital Zoom  
Photo Search  
Photo Copy  
Audio Select  
Audio Effect  
Rec Mode  
Audio Mode  
WindCut Plus  
Real Stereo  
AV In/Out @  
Photo Quality  
Photo Size #  
File No.  
Selecting the Digital Zoom  
58  
Tape  
Searching pictures recorded in Tape  
Copying still images from a cassette to Memory Card  
Selecting the Audio playback channel  
Selecting the Audio Effect  
59  
87  
64  
68  
Record  
Selecting the recording speed  
Selecting Sound Quality for recording  
Minimizing wind noise  
43  
43  
44  
Selecting the Real Stereo  
45  
Selecting the AV input/output  
Selecting Image Quality  
69  
Memory !  
74  
Selecting the recording Photo Size  
File Numbering Options  
75  
76  
M.Play Select  
Delete  
Selecting Storage Media (Photo, Movie) to playback  
Deleting Files  
85  
80  
Delete All  
Deleting All files  
81  
Protect  
Preventing Accidental Erasure  
Print images recorded on a Memory Card  
Formatting the Memory Card  
79  
Print Mark  
Format  
88  
82  
! : VP-D375W(i)/D975W(i) only  
@ : VP-D371i/D371Wi/D372WHi/D375Wi/D975Wi only  
# : VP-D975W(i) only  
105  
ENGLISH  
Troubleshooting  
Available mode  
.
Main Menu  
Sub Menu  
Functions  
Page  
.
Player  
Camera  
M Cam  
!
M Player  
!
Display  
LCD Bright  
Setting the Brightness tone of the LCD Screen  
Setting the Colour tones of the LCD Screen  
Setting the Date and Time  
Selecting OSD on/off of TV  
Setting the Clock Set  
29  
29  
30  
31  
23  
24  
25  
26  
94  
27  
28  
LCD Colour  
Date/Time  
TV Display  
System  
Clock Set  
Remote !  
Using the remote control  
Setting the Beep sound  
Beep Sound  
Shutter Sound !  
USB Connect !  
Language  
Setting the Shutter sound  
Setting the USB  
Selecting the OSD language  
Demonstration  
Demonstration  
! : VP-D375W(i)/D975W(i) only  
This Owners Manual covers the complete range of VP-DXXX digital video camcorders including non  
DV(IEEE1394)/AV(Analog) In and DV(IEEE1394)/AV(Analog) In versions of the same models. Please note that  
models without a ‘i’ suffix do not feature DV(IEEE1394)/AV(Analog) In.  
Models with a ‘i’ suffix do feature DV(IEEE1394)/AV(Analog) In.  
106  
ENGLISH  
Specifications  
Model Name: VP-D371(i)/D371W(i)/D372WH(i)/D375W(i)/D975W(i)  
System  
Video signal  
PAL  
Video recording system  
Audio recording system  
Usable cassette  
Tape speed  
2 rotary heads, Helical scanning system  
Rotary heads, 12/16b PCM system  
Digital video tape (6.35mm width): Mini DV cassette  
SP: approx. 18.83mm/s LP: approx. 12.57mm/s  
SP: 60 minutes (when using DVM 60), LP: 90 minutes (when using DVM 60)  
Approx. 150 sec. (using DVM60 tape)  
Tape recording time  
FF/REW time  
Image device  
CCD (Charge Coupled Device) (VP-D371(i)/D371W(i)/D372WH(i)/D375W(i) : 800K Pixels,  
VP-D975W(i) : 1MEGA Pixels)  
F1.6 34X (VP-D371(i)/D371W(i)/D372WH(i)/D375W(i)), 26X (VP-D975W(i)), 1200x (Digital) Electronic zoom lens  
Ø30  
Lens  
Filter diameter  
LCD Screen/Viewfinder  
Size/dot number  
LCD Screen Method  
Viewfinder  
2.5inch 112K (VP-D371(i)), 2.7inch 112K (VP-D371W(i)/D372WH(i)/D375W(i)/D975W(i))  
TFT LCD  
Colour LCD  
Connectors  
Video output  
1Vp-p (75Ω terminated)  
-7.5dBs (600Ω terminated)  
4pin special in/out connector  
Mini-B type connector  
Audio output  
DV input/output  
USB output  
(VP-D375W(i)/D975W(i) only)  
General  
Power source  
DC 8.4V, Lithium Ion Battery Pack 7.4V  
Power source type  
Power consumption  
(Recording)  
Lithium Ion Battery Pack, Power supply (100V~240V) 50/60Hz  
3.5W(VP-D371/D371W(i)/D372WH(i)/D375W(i))  
3.9W(VP-D975W(i))  
Operating temperature  
Storage temperature  
External dimension  
Weight  
Internal Microphone  
Remote control  
(VP-D375W(i)/D975W(i) only)  
0˚~40˚C (32˚F~104˚F)  
-20˚C ~ 60˚C (-4˚F ~ 140˚F)  
Height : 3.70inches (94mm), Length : 4.69inches (119mm), Width : 2.16inches (55mm)  
0.75lb (340g, 11.99oz) (Except for Lithium Ion Battery Pack and tape)  
Omni-directional stereo microphone  
Indoors: greater than 49ft(15m) (straight line), Outdoors: about 16.4ft(5m) (straight line)  
- The technical specifications and design may be changed without notice.  
107  
ENGLISH  
Index  
- A -  
- F -  
- R -  
Accessories ...........................................8 Fade ................................................... 40 Rec Mode ........................................... 43  
AF/MF ................................................. 47 Formatting .......................................... 82 Rec Search ........................................ 36  
Audio Dubbing ................................... 63 Frame advance .................................. 62 Remote ............................................... 24  
Audio Mode......................................... 43 Function buttons .................................. 9 Remote control ................................... 13  
- B -  
- H -  
- S -  
Battery Pack ....................................... 16 Hand Strap ......................................... 14 Shutter Speed .................................... 46  
BLC ................................................... 57  
Sound ........................................... 25~26  
Speaker .............................................. 60  
- I -  
- C -  
IEEE1394 ..................................... 91~92  
- T -  
Cassette ............................................. 32  
Cleaning ........................................... 100  
- L -  
Tele Macro........................................... 55  
Clock Set............................................. 23 LCD .................................................... 29 TV Display........................................... 31  
Connecting ......................................... 96  
- M -  
- U -  
- D -  
Memory Card ..................................... 72 USB (VP-D375W(i)/D975W(i) only)..93~98  
Date/Time ........................................... 30 Moving Image Recording.....................83  
DC Cable ............................................ 19  
Deleting ........................................ 80~81  
- V -  
- O -  
Viewfinder ........................................... 32  
Demonstration..................................... 28 OSD ............................................. 21, 22 Voice+.................................................. 67  
DIS....................................................... 56  
DV........................................................ 92  
Visual Effect ....................................... 52  
- P -  
- W -  
Photo Copy ........................................ 87  
- E -  
Photo Quality ...................................... 74 White Balance..................................... 50  
EASY.Q Mode .................................... 35 Photo Size........................................... 75 WindCut Plus ...................................... 44  
Exposure ............................................ 46 Photo Search ...................................... 59  
- Z -  
Program AE ........................................ 48  
Protection ........................................... 79 ZERO MEMORY ................................ 37  
Photo images ..................................... 78 Zoom .................................................. 39  
108  
ENGLISH  
Power Sources (United Kingdom Only)  
The mains lead on the power adapter is supplied with a moulded plug incorporating a fuse.  
The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to  
BS1362 of the same rating must be used.  
Never use the plug with the fuse cover omitted if the cover is detachable.  
If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.  
Replacement covers are available from your dealer.  
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point,  
you should obtain a suitable safety approved extension lead or consult your dealer for assistance.  
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug.  
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.  
IMPORTANT  
The wires in the mains lead are coloured in accordance with the following code:  
BLUE = NEUTRAL  
BROWN = LIVE  
As these colours may not correspond to the coloured marqueings identifying the terminals in your plug, proceed as follows:  
The wire coloured BLUE must be connected to the terminal marqueed with the letter N or coloured BLUE or BLACK.  
The wire coloured BROWN must be connected to the terminal marqueed with the letter L or coloured BROWN or RED.  
[ WARNING ]  
[ NOTE ]  
Do not connect either wire to the earth terminal marqueed with the letter E or the earth symbol,  
or coloured GREEN or GREEN and YELLOW.  
,
This page is applicable to Great Britain only.  
109  
UNITED KINGDOM  
REPUBLIC OF IRELAND  
This Samsung product is warranted for the period of twelve  
(12) months from the original date of purchase, against  
defective materials and workmanship. In the event that  
warranty service is required, you should return the product to  
the retailer from whom it was purchased.  
However, Samsung Authorised Dealers and Authorised  
Service Centres in other EC Countries will comply with the  
warranty on the terms issued to purchasers in the country  
concerned. In case of difficulty, details of our Authorised  
Service Centres are available from:  
the products caused by such repair work will not be covered  
by this warranty.  
4. This product is not considered to be defective in materials  
nor workmanship by reason that it requires adaptation in  
order to conform to national or local technical or safety  
standards in force in any Country other than the one for  
which the product was originally designed and  
manufactured. This warranty will not cover, and no re-  
imbursement will be made for such adaptation nor any  
damage which may result.  
5. This warranty covers none of the following:  
Samsung Electronics U.K. Ltd.  
Customer Care Centre  
a) Periodic check ups, maintenance and repair or  
replacement of parts due to normal wear and tear.  
b) Cost relating to transport, removal or installation of the  
product.  
c) Misuse, including the failure to use this product for its  
normal purposes or incorrect installation.  
d) Damage caused by Lightning, Water, Fire, Acts of God,  
War, Public Disturbances, incorrect mains voltage,  
improper ventilation or any other cause beyond the  
control of Samsung.  
PO Box 17243  
Edinburgh, EH11 4YB  
United Kingdom  
Tel: 0870 SAMSUNG (7267864), Fax: 0870 7221127  
(United Kingdom)  
Tel: 0818 717 100, Fax: +44 (0)870 7221127  
(Republic of Ireland)  
Web: www.samsung.com/uk  
6. This warranty is valid for any person who legally acquired  
possession of the product during the warranty period.  
7. The consumers statutory rights in any applicable national  
legislation whether against the retailer arising from the  
purchase contract or otherwise are not affected by this  
warranty. Unless there is national legislation to the contrary,  
the rights under this warranty are the consumers sole rights  
and Samsung, its subsidiaries and distributors shall not be  
liable for indirect or consequential loss or any damage to  
records, compact discs, videos or audio taper or any other  
related equipment or material.  
I WARRANTY CONDITIONS  
1. The warranty is only valid if, when warranty service is  
required, the warranty card is fully and properly completed  
and is presented with the original invoice or sales slip or  
confirmation, and the serial number on the product has not  
been defaced.  
2. Samsung’s obligations are limited to the repair or, at its  
discretion, replacement of the product or the defective part.  
3. Warranty repairs must be carried out by Authorised  
Samsung Dealers or Authorised Service Centres. No re-  
imbursement will be made for repairs carried out by non  
Samsung Dealers and, any such repair work and damage to  
SAMSUNG ELECTRONICS (U.K.) LTD.  
ELLAS  
(GREECE)  
Agaphte pelath,  
3. H episkeuh tou proiontoı prepei na anatiqetai mono se  
exousiodothmena kentra service h exousiodothmenouı  
antiproswpouı thı SAMSUNG. Kamia apozhmiwsh den qa  
ginei apodekth gia episkeuh pou ecei ginei apo mh  
exousiodothmeno apo thn SAMSUNG sunergeio.  
4. To proion auto den qa qewrhqei ellatwmatiko sta ulika h  
sthn ergasia episkeuhı ean qa prepei na prosarmostei,  
metatrapei h ruqmistei wste na summorfwqei me tiı  
topikeı tecnikeı prodiagrafeı h prodiagrafeı pou  
iscuoun se cwra allh apo auth gia thn opoia proorizotan  
h kataskeuasthke.  
Saı eucaristoume gia thn empistosunh pou deixate sthn  
SAMSUNG me thn agora authı thı suskeuhı.  
To proion auto thı SAMSUNG einai egguhmeno gia periodo  
dwdeka (12) mhnwn apo thn hmeromhnia agoraı tou gia  
antallaktika kai ergatika. Sthn periptwsh pou qa  
creiastei episkeuh, to proion auto thı SAMSUNG qa  
prepei na stalei h na metaferqei sto exousiodothmeno  
service, me exoda tou agorasth.  
Exousiodothmenoi antiproswpoi kai exousiodothmena kentra  
service se alleı Eurwpaikeı cwreı, qa apodecqoun touı  
orouı thı egguhshı.  
H egguhsh auth den kaluptei apozhmiwseiı giaÚ  
Plhroforieı gia ta exousiodothmena kentra service sthn  
Ellada, mporeite na parete apo thn  
Kefaleı binteo kai kasetofwnwn  
Kefaleı binteokameraı  
Gennhtrieı aktinwn Iaser sta CD, DVD  
Thleceiristhria  
Lucnieı fournwn mikrokumatwn  
Prosarmogeı, metatropeı h ruqmiseiı, anexarthta an  
einai epituchı h anepituchı, oute opoiadhpote zhmia  
proercetai ex autou...  
*
*
*
*
*
*
FOURLIS TRADE A.E.B.E.  
L. Kruoneriou 112  
145 68 Kruoneri, Apikhı  
Thl. 210.629.3100  
I Oroi thı egguhshı  
1. H egguhsh iscuei ean kai mono ean to proion creiazetai  
service kai h karta egguhshı ecei plhrwı sumplhrwqei  
kai sfragisqei apo to katasthma agoraı. Epishı prepei  
na proskomisqei kai to timologio h h apodeixh  
lianikhı pwlhshı, panw sthn opoia o seiriakoı ariqmoı  
tou proiontoı prepei na einai eukrinhı.  
2. H upocrewsh thı SAMSUNG afora mono thn episkeuh  
tou proiontoı  
5. H egguhsh auth den kaluptei kamia apo tiı parakatw  
periptwseiıÚ  
E. Se periptwsh pou den uparcei eqnikh nomoqesia  
auth h egguhsh qa einai h monadikh kai  
apokleistikh kaluyh tou katanalwth gia kaqe  
zhmia.  
Periodikouı elegcouı, sunthrhsh kai episkeuh h  
*
antikatastash merwn pou ofeilontai se fusiologikh  
fqora  
Ta exoda kai touı kindunouı metaforaı pou  
scetizontai me thn egguhsh autou tou proiontoı  
*
FOURLIS TRADE A.E.B.E.  
Zhmia se auto to proion pou proercetai apoÚ  
A. Katacrhsh h kai kakh crhsh, sumperilambanomenhı  
alla kai mh periorismenhı seÚ  
*
Mh crhsh autou tou proiontoı gia touı skopouı  
pou fusiologika proorizetai h sumfwna me tiı  
odhgieı crhsewı gia thn swsth crhsh kai  
sunthrhsh autou tou proiontoı  
Thn egkatastash kai crhsh tou proiontoı me  
tropouı pou antikeintai stiı tecnikeı  
prodiagrafeı asfaleiaı pou iscuoun kata thn  
crhsh tou proiontoı  
B. Episkeuh pou egine apo mh exousiodothmena  
sunergeia service  
G. Atuchmata, qeomhnieı h opoiadhpote aitia pera  
tou elegcou thı SAMSUNG, sumperilambanomenwn  
alla mh periorismenwn twn keraunwn, tou nerou,  
thı fwtiaı, twn dhmosiwn anataracwn, tou kakou  
aerismou klp.  
D. H egguhsh auth den ephreazei ta dikaiwmata tou  
katanalwth pou problepontai apo thn efarmostea  
eqnikh nomoqesia pou iscuei, oute ta dikaiwmata  
twn katanalwtwn enantion twn lianopwlhtwn pou  
aporreoun apo thn sumbash pwlhshı.  
ENGLISH  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.  
Region Country  
Customer  
Care Centre  
Web Site  
www.samsung.com/ca  
www.samsung.com/mx  
www.samsung.com  
CANADA  
MEXICO  
U.S.A  
1-800-SAMSUNG (7267864)  
01-800-SAMSUNG (7267864)  
1-800-SAMSUNG (7267864)  
0800-333-3733  
North America  
www.samsung.com/ar  
www.samsung.com/br  
www.samsung.com/cl  
www.samsung.com/latin  
www.samsung.com/latin  
www.samsung.com/latin  
www.samsung.com/latin  
www.samsung.com/latin  
www.samsung.com/latin  
www.samsung.com/latin  
www.samsung.com/latin  
www.samsung.com/latin  
www.samsung.com/latin  
www.samsung.com/be  
www.samsung.com/cz  
www.samsung.com/dk  
www.samsung.com/fi  
www.samsung.com/fr  
www.samsung.de  
ARGENTINE  
BRAZIL  
0800-124-421  
CHILE  
800-726-7864(SAMSUNG)  
0-800-507-7267  
1-800-10-7267  
COSTA RICA  
ECUADOR  
EL SALVADOR  
GUATEMALA  
JAMAICA  
800-6225  
Latin America  
1-800-299-0013  
1-800-234-7267  
800-7267  
1-800-682-3180  
1-800-751-2676  
1-800-7267-864  
1-800-100-5303  
02 201 2418  
PANAMA  
PUERTO RICO  
REP. DOMINICA  
TRINIDAD & TOBAGO  
VENEZUELA  
BELGIUM  
CZECH REPUBLIC  
DENMARK  
FINLAND  
844 000 844  
38 322 887  
09 693 79 554  
FRANCE  
08 25 08 65 65 (0,15€/Min)  
01805 - 121213 (€ 0,14/Min)  
06 40 985 985  
GERMANY  
HUNGARY  
ITALIA  
LUXEMBURG  
NETHERLANDS  
NORWAY  
www.samsung.com/hu  
www.samsung.com/it  
www.samsung.lu  
199 153 153  
Europe  
02 261 03 710  
0900 20 200 88 (€ 0.10/Min)  
231 627 22  
www.samsung.com/nl  
www.samsung.com/no  
www.samsung.com/pl  
www.samsung.com/pt  
www.samsung.com/sk  
www.samsung.com/es  
www.samsung.com/se  
www.samsung.com/uk  
www.samsung.ru  
www.samsung.com/ur  
www.samsung.com/au  
www.samsung.com.cn  
www.samsung.com/hk  
POLAND  
0 801 801 881  
PORTUGAL  
SLOVAKIA  
SPAIN  
80 8 200 128  
0850 123 989  
902 10 11 30  
SWEDEN  
U.K  
RUSSIA  
UKRAINE  
08 585 367 87  
0870 SAMSUNG (7267864)  
8-800-200-0400  
8-800-502-0000  
1300 362 603  
800-810-5858, 010- 6475 1880  
2862 6001  
CIS  
AUSTRALIA  
CHINA  
HONG KONG  
3030 8282  
1600 1100 11  
www.samsung.com/in  
INDIA  
www.samsung.com/id  
www.samsung.com/jp  
www.samsung.com/my  
www.samsung.com/ph  
www.samsung.com/sg  
INDONESIA  
JAPAN  
MALAYSIA  
PHILIPPINES  
SINGAPORE  
0800-112-8888  
0120-327-527  
1800-88-9999  
1800-10-SAMSUNG (7267864)  
1800-SAMSUNG (7267864)  
1800-29-3232  
Asia Pacific  
www.samsung.com/th  
THAILAND  
02-689-3232  
www.samsung.com/tw  
www.samsung.com/vn  
www.samsung.com/za  
www.samsung.com/mea  
TAIWAN  
0800-329-999  
1 800 588 889  
0860 7267864 (SAMSUNG)  
800SAMSUNG (7267864)  
VIETNAM  
SOUTH AFRICA  
U.A.E  
Middle East & Africa  
ENGLISH  
THIS CAMCORDER IS MANUFACTURED BY:  
RoHS compliant  
Our product complies with “The Restriction Of the use of certain Hazardous Substances in electrical and electronic  
equipment”, and we do not use the 6 hazardous materials- Cadmium(Cd), Lead (Pb), Mercury (Hg), Hexavalent  
Chromium (Cr+6), Poly Brominated Biphenyls (PBBs), Poly Brominated Diphenyl Ethers(PBDEs)- in our products.  

Westcott Apollo 1070 User Manual
West Bend Chefscape L5746 User Manual
Weil McLain Boiler SGO W SERIES 3 OIL FIRED NATURAL DRAFT WATER BOILER User Manual
Transcend Information CompactFlash 400X User Manual
Tektronix Car Amplifier 5A21N User Manual
Sony RM VJ1 User Manual
Sony Handycam HDR XR150E User Manual
Sony CCU TX7P User Manual
Sony Car Stereo System 70AP User Manual
Samsung VP L 900 User Manual