Samsung VP D 130 User Manual

ENGLISH  
Digital Video Camcorder  
VP-D130/D130i  
VP-D190/D190i  
AF  
Auto Focus  
CCD Charge Coupled Device  
LCD Liquid Crystal Display  
Owner’s Instruction Book  
Before operating the unit, please read this  
instruction book thoroughly, and retain it for  
future reference.  
ELECTRONICS  
This product meets the intent of  
Directive 89/336 CEE, 73/23 CEE, 93/68 CEE.  
ENGLISH  
Contents  
Hints for Stable Image Recording  
Recording with the LCD monitor  
Recording with the Viewfinder  
Adjusting the LCD  
28  
28  
28  
29  
30  
30  
31  
32  
32  
Using the VIEWFINDER  
Adjusting the Focus  
Playing back a tape you have recorded on the LCD  
Adjusting the LCD during PLAY  
Controlling Sound from the Speaker  
Advanced Recording .......................................................................................................................................... 33  
Use of various Functions  
33  
33  
33  
34  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
Setting menu items  
Set the camcorder to CAM or VCR mode and M.REC or M.PLAY mode (VP-D190/D190i only)  
Availability of functions in each mode  
RESET  
CLOCK SET  
REMOCON  
BEEP SOUND  
SHUTTER SOUND  
DEMONSTRATION  
PROGRAM AE  
Setting the PROGRAM AE  
WHT. BALANCE (WHITE BALANCE)  
Zoom ing In and Out with DIGITAL ZOOM  
Zooming In and Out  
Digital Zoom  
EIS (Electronic Image Stabilizer)  
DSE (Digital Special Effects) SELECT  
Selecting an effect  
CUSTOM.Q  
REC MODE  
AUDIO MODE  
WIND CUT  
DATE/TIME  
TV DISPLAY  
Using Quick Menu  
Setting the Quick menu  
SHUTTER SPEED & EXPOSURE  
EASY Mode (for Beginners)  
CUSTOM Mode  
MF/AF (Manual Focus/Auto Focus)  
3
ENGLISH  
Contents  
Auto Focusing  
59  
59  
60  
61  
61  
61  
62  
62  
63  
64  
64  
65  
66  
66  
66  
66  
67  
67  
68  
68  
68  
68  
69  
69  
70  
Manual Focusing  
BLC (Back Light Compensation)  
Fade In and Out  
To Start Recording  
To Stop Recording (use FADE IN / FADE OUT)  
Audio dubbing  
Record the sound again using MIC dubbing  
Dubbed Audio Playback  
PHOTO Image Recording  
Searching for a PHOTO picture  
Various Recording Techniques  
Tape Playback  
Playback on the LCD  
Playback on a TV monitor  
Connecting to a TV which has Audio Video input jacks  
Connecting to a TV which has no Audio and Video input jacks  
Playback  
Various Functions while in VCR mode  
Playback pause  
Picture search (Forward/Reverse)  
Slow playback (Forward/Reverse)  
Frame advance (To play back frame by frame)  
X2 Playback (Forward/Reverse )  
ZERO MEMORY  
IEEE 1394 Data Transfer .................................................................................................................................... 71  
Transferring IEEE1394 (i.LINK)-DV standard data connections  
Connecting to a DV device  
71  
71  
71  
72  
72  
Connecting to a PC  
System requirements  
Recording with a DV connection cable (VP-D130i/D190i only)  
USB interface .................................................................................................................................................... 73  
Transferring a Digital Image through a USB Connection  
System Requirements  
Installing DVC Media Program  
Connecting to a PC  
73  
73  
74  
76  
Digital Still Camera mode (VP-D190/D190i only) .............................................................................................. 77  
SmartMediaCard  
Functions with SMC  
77  
77  
4
ENGLISH  
Contents  
Inserting and ejecting the SmartMediaCard  
Inserting the card  
78  
78  
78  
79  
79  
80  
80  
80  
81  
81  
82  
83  
83  
83  
84  
85  
86  
87  
88  
88  
Ejecting the card  
Structure of folders and files on the Smart Media Card  
Image Format  
Selecting the image quality  
Select the image quality  
Number of images on the SmartMediaCard  
Recording Still images to a SmartMediaCard  
Recording images to a SmartMediaCard  
Recording an image from a cassette as a still image  
Viewing Still images  
To view a Single image  
To view a slide show  
Copying still images from a cassette to SmartMediaCard  
Marking on images for printing  
Protection from accidental erasure  
Deleting Still images  
Formatting a SmartMediaCard  
Attention  
Maintenance ........................................................................................................................................................ 89  
After finishing a recording  
After completing a recording session  
Cleaning and Maintaining the Camcorder  
Cleaning the VIEWFINDER  
Cleaning the Video Heads  
Using Your Camcorder Abroad  
Power sources  
89  
89  
90  
90  
90  
91  
91  
91  
Colour system  
Troubleshooting .................................................................................................................................................... 92  
Troubleshooting  
92  
92  
92  
93  
Self Diagnosis Display  
Moisture Condensation  
Self Diagnosis Display in M.REC, M.PLAY mode  
Specifications........................................................................................................................................................ 95  
INDEX .................................................................................................................................................................. 96  
Power Sources (United Kingdom Only)................................................................................................................ 97  
5
ENGLISH  
Notes and Safety Instructions  
Notes regarding the rotation of the LCD screen  
Please rotate the LCD screen carefully as illustrated.  
Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder.  
1
2
3
4
5
1. LCD screen closed.  
2. Standard recording using the LCD screen.  
90  
3. Recording when looking at the LCD screen from the top.  
90  
4. Recording when looking at the LCD screen from the front.  
5. Recording with the LCD screen closed.  
90  
90  
6
ENGLISH  
Notes and Safety Instructions  
Notes regarding moisture condensation  
1. A sudden rise in atmospheric temperature may cause condensation to form inside the camcorder.  
for example:  
-
-
When you move the camcorder from a cold location to a warm location (e.g. from outside to inside during winter.)  
When you move the camcorder from a cool location to a hot location (e.g. from inside to outside during the summer.)  
2. If the  
(DEW) protection feature is activated, leave the camcorder for at least two hours in a dry, warm room with  
the cassette compartment opened and the battery removed.  
Notes regarding CAMCORDER  
1. Do not leave the camcorder exposed to high temperature (above 60°C or 140°F).  
For example, in a parked car in the sun or exposed to direct sunlight.  
2. Do not let the camcorder get wet.  
Keep the camcorder away from rain, sea water, and any other form of moisture.  
If the camcorder gets wet, it may get damaged.  
Sometimes a malfunction due to exposure to liquids cannot be repaired.  
Notes regarding COPYRIGHT  
Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted.  
Unauthorized copying of copyrighted material may be against the law.  
7
ENGLISH  
Notes and Safety Instructions  
Notes regarding the battery pack  
-
-
Make sure that the battery pack is fully charged before starting record.  
To preserve battery power, keep your camcorder turned off when you are not  
operating it.  
-
If your camcorder is in CAMERA mode, and it is left in STBY mode without  
beingoperated for more than 5 minutes with a tape installed, it will  
automatically turn itself off to protect against unnecessary battery discharge.  
Make sure that the battery pack is fitted firmly into place.  
Dropping the battery pack may damage it.  
-
-
-
A brand new battery pack is not charged.  
Before using the battery pack, you need to charge it completely.  
It is a good idea to use the viewfinder rather than the LCD when recording over a  
long time, because the LCD uses up more battery power.  
* When the battery reaches the end of its life, please contact your local dealer.  
The batteries have to be dealt with as chemical waste.  
Notes regarding the Video Head Cleaning  
-
To ensure normal recording and a clear picture, clean the video heads regularly. If a square block-shape distorts  
playback, or if during playback only a blue screen is displayed, the video heads may be dirty. If this happens,  
the video heads with a dry type cleaning cassette.  
clean  
-
Do not use a wet-type cleaning cassette. It may damage the video heads.  
8
ENGLISH  
Notes and Safety Instructions  
Note regarding the LENS  
-
Do not film with the camera lens pointing directly at the sun.  
Direct sunlight can damage the CCD(Charge Coupled Device).  
Notes regarding electronic viewfinder  
1. Do not position the camcorder such that the viewfinder is pointing towards the sun.  
Direct sunlight can damage the inside of the viewfinder. Be careful when placing the camcorder under  
sunlight or near a window exposed to sunlight.  
2. Do not pick up the camcorder from the viewfinder.  
3. Over-rotating of the viewfinder may damage it.  
Notes regarding Record’ or Playback’ using the LCD  
1. The LCD display has been manufactured using high precision tech-  
nology. However, there may be tiny dots (red, blue or green in color)  
that appear on the LCD display.  
These dots are normal and do not affect the recorded picture in any way.  
2. When you use the LCD display under direct sunlight or outdoors,  
it maybe difficult to see the picture clearly.  
If this occurs, we recommend that the viewfinder is used.  
3. Direct sunlight can damage the LCD monitor.  
Notes regarding the hand strap  
-
-
To ensure a steady picture during filming, check that the hand strap is properly adjusted.  
Do not force your hand into the hand strap as you could damage it.  
9
ENGLISH  
Notes and Safety Instructions  
Precautions regarding the Lithium battery  
1. The lithium battery maintains the clock function and user settings, even if the battery pack or AC adapter is removed.  
2. The lithium battery for the camcorder lasts about 1 month under normal operation from the time of installation.  
3. When the lithium battery becomes weak or is dead, the date/time indicator will flash for about five seconds  
when you set the power switch to CAM mode.  
In this case, you are recommended that you should connect the camcorder to power to fully recharge the embedded  
lithium battery. If you see the same problem occur even on the fully recharged battery, you’d better contact to a nearby  
customer service center as the battery has had it.  
4. Danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type.  
Warning: Keep the LITHIUM BATTERY(REMOCON) out of reach of children. Should a battery be swallowed,  
consult a doctor immediately.  
10  
ENGLISH  
Getting to Know Your Camcorder  
Features  
Digital data transfer function with IEEE1394  
By incorporating the IEEE 1394 (i.LINKTM : i.LINK is a serial data transfer protocol and interconnectivity system,  
used to transmit DV data) high speed data transport port, both moving and still images can be transferred to a PC,  
making it possible to produce or edit various images.  
(VP-D130/D190 is not able to record and receive digital data from another DV Device.)  
USB interface for digital image data transfer  
You can transfer still images and short video clips to a PC using the USB interface without an add-on card.  
PHOTO  
The PHOTO function lets you capture an object as a still along with sound, while in Camera mode.  
480x Digital zoom  
Allows you to magnify an image up to 480 times its original size.  
Colour TFT LCD  
A high-resolution colour TFT LCD (with 200,000 pixels) gives you clean, sharp images as well as the ability to  
review your recordings immediately.  
Electronic Image Stabilizer (EIS)  
The EIS compensates for any handshake, reducing unstable images particularly at high magnification.  
Various digital effects  
The DSE (Digital Special Effects) allows you to give your films a special look by adding various special effects.  
Back Light Compensation (BLC)  
When you record a subject with the light source behind it or a subject with a light background,  
the BLC function compensates for the bright background.  
Program AE  
The Program AE enables you to alter the shutter speed and aperture to suit the type of scene/action to be filmed.  
Digital Still Camera function (VP-D190/D190i only)  
Using SmartMediaCard, you can easily record and playback standard still images.  
You can transfer standard still images on SmartMediaCard to PC using USB interface.  
11  
ENGLISH  
Getting to Know Your Camcorder  
Accessories Supplied with camcorder  
Make sure that the following basic accessories are supplied with your digital video camera.  
Basic Accessories  
1. Lithium Ion Battery pack  
4. AUDIO/VIDEO cable  
7. S-VIDEO cable  
2. AC Power Adapter  
5. Instruction Book  
8. Remote Control  
3. AC cord  
1. Lithium Ion Battery pack  
2. AC Power Adapter  
3. AC Cord  
4. AUDIO/VIDEO cable  
5. Instruction Book  
6. Lithium battery for Remote Control  
(TYPE: CR2025, 1 EA)  
7. S-VIDEO cable  
8. Remote Control  
9. USB cable  
6. Lithium battery (1EA)  
10. Scart adapter  
11. Software CD,  
9. USB cable  
Instruction Book (VP-D190/D190i only)  
VP-D130/D130i: DVC Media 2.0  
VP-D190/D190i: DVC Media 1.0  
12. SmartMediaCard (VP-D190/D190i only)  
13. USB AUDIO cable (VP-D130/D130i only)  
10. Scart adapter  
11. Software CD &  
Instruction Book  
12. SmartMediaCard  
(VP-D190/D190i only)  
3V 8MB  
13. USB AUDIO cable  
(VP-D130/D130i only)  
12  
ENGLISH  
Getting to Know Your Camcorder  
Front & Left View  
1. Lens  
5. TFT LCD monitor  
3. Remote Sensor  
8. USB Jack  
4. Hook for hand strap  
9. DV out(VP-D130/D190)  
DV in/out(VP-D130i/D190i)  
7. External MIC in  
6. Battery Pack  
12. DC Jack  
2. Lens Cover  
11. Earphone Jack  
13. S-Video Jack  
10. Audio/Video  
1. Lens  
8. USB Jack (see page 73)  
2. Lens Cover  
3. Remote Sensor  
4. Hook for hand strap (see page 20)  
5. TFT LCD monitor  
9. DV out (VP-D130/D190) (see pages 71, 72)  
DV in/out (VP-D130i/D190i)  
10. Audio/Video (see page 67)  
11. Earphone Jack  
6. Battery Pack (see page 22)  
7. External MIC in (see page 62)  
12. DC Jack (see page 21)  
13. S-Video Jack  
13  
ENGLISH  
Getting to Know Your Camcorder  
Right & Top View  
2. Video Light Holder  
3. Dual Zoom  
9. Internal MIC  
6. Photo button  
4. Custom.Q button  
1. SPEAKER  
7. Zoom lever  
5. Easy.Q button  
10. START/STOP button  
8. Card Eject Switch  
(VP-D190/D190i only)  
1. SPEAKER  
7. Zoom lever (See page 43)  
2. Video Light Holder  
8. Card Eject Switch (See page 78)  
(VP-D190/D190i only)  
9. Internal MIC  
3. Dual Zoom (See page 43)  
4. Custom.Q button (See page 58)  
5. Easy.Q button (See page 57)  
6. Photo button (See page 64)  
10. START/STOP button  
14  
ENGLISH  
Getting to Know Your Camcorder  
Rear & Bottom View  
13. RESET  
11. Viewfinder  
12. Power switch  
6. FADE button  
1. LCD open  
2. MENU button  
3. MENU DIAL  
4. Battery Release  
button  
9. Functions Keys  
7. DISPLAY button  
5. Charging indicator  
8. TAPE Eject switch  
10. SmartMediaCard Slot  
(VP-D190/D190i only)  
1. LCD open  
7. DISPLAY button  
8. TAPE Eject switch  
9. Functions Keys  
10.SmartMediaCard Slot (VP-D190/D190i only)  
11.Viewfinder (see page 30)  
2. MENU button (See page 33)  
3. MENU DIAL (MENU SELECT/VOLUME/M.FOCUS)  
(See page 33)  
4. Battery Release button (See page 89)  
5. Charging indicator (See page 22)  
6. FADE button (See page 61)  
12.Power switch (see page 26)  
13. RESET (see page 34)  
Functions Keys  
M.PLAY  
(VP-D190/D190i only)  
VCR  
CAM  
(REW)  
(PLAY/STILL) MF/AF  
(FWD) EDIT +  
(See page 60)  
EDIT –  
REV  
(See page 59)  
S.SHOW  
FWD  
DELETE(See page 87)  
(STOP)  
BLC  
15  
ENGLISH  
Getting to Know Your Camcorder  
Remote control  
16. DISPLAY  
1. PHOTO  
2. START/STOP  
3. SELF TIMER  
4. ZERO MEMORY  
START/  
STOP  
WIDE  
PHOTO  
ZERO  
DISPLAY  
A.DUB  
15. Zoom WIDE  
14. Zoom TELE  
SELF  
TIMER MEMORY  
TELE  
13. A.DUB  
5.  
(FF)  
STILL  
6.  
7.  
(REW)  
(PLAY)  
12. (STILL)  
X2  
SLOW  
F.ADV  
11. (STOP)  
8. X2  
9. (SLOW)  
10. Frame Advance  
1. PHOTO  
2. START/STOP  
10. Frame Advance (see page 69)  
11. (STOP)  
3. SELF TIMER (see page 19)  
4. ZERO MEMORY (see page 70)  
12. (STILL)  
13.A.DUB (see page 62)  
14. Zoom TELE  
15. Zoom WIDE  
16. DISPLAY (see page 17, 18)  
5.  
6.  
7.  
(FF)  
(REW)  
(PLAY)  
8. X2 (see page 69)  
9. (SLOW)  
16  
ENGLISH  
Getting to Know Your Camcorder  
OSD (On Screen Display in CAM and VCR modes)  
1. Battery level (see page 24)  
2. Custom or Easy mode (see pages 57, 58)  
3. DSE (Digital Special Effects) mode (see page 46)  
4. Program AE (see page 40)  
5. White Balance mode (see page 42)  
6. BLC (Back Light Compensation) (see page 60)  
7. Manual focus (see page 59)  
8. Shutter speed and EXPOSURE (see page 56)  
9. Zoom position (see page 43)  
10. DATE/TIME (see page 52)  
11. USB  
OSD in CAM mode  
22  
21 20  
19  
18  
REC  
1
16  
15  
17  
27  
14  
13  
12  
M
-
0
:
0
0
:
0
0
CUSTOM  
2
3
4
5
MIRROR  
5
5
min  
TAPE  
!
1
6
bit  
BLC  
6
7
SHUTTER  
EXPOSURE  
11  
2
.
0
:
0
0
0
1
1
.
N
O
V
2
0
10  
ZOOM  
SHUTTER  
EXPOSURE  
9
8
12. REMOCON  
13. WIND CUT (see page 51)  
14. Audio recording mode (see page 50)  
15. Remaining Tape (measured in minutes)  
16. Tape counter  
17. Zero memory indicator (see page 70)  
18. Operating mode  
OSD in VCR mode  
20 19  
18  
24  
17  
SOUND  
[
2
]
M
-
0
:
0
0
:
0
0
5
5
min  
19. Record speed mode  
26  
27  
.
.
.
C
20. PHOTO mode  
1
6 bit  
21. Self recording and waiting timer (see page 19)  
22. EIS (see page 45)  
DV  
25  
1
.
2
:
0
0
0
1
1
.
N
O
V
2
0
23. Volume control (see page 32)  
24. Audio playback channel  
VOL.  
[
1
1
]
10  
23  
25. DV IN (VP-D130i/D190i only)  
(DV data tra-nsfer mode) (see page 72)  
26. DEW (See page 7)  
27. Message Line  
17  
ENGLISH  
Getting to Know Your Camcorder  
OSD (On Screen Display in M.REC/M.PLAY modes)  
These items are available in for the VP-D190/D190i models only.  
OSD in M.REC mode  
28. Folder number-file number (see page 79)  
29. Image counter  
32 3130  
- Current still image/Total number of recordable still images.  
30. CARD (memory) indicator  
S.Q  
29  
[
2
2
/
2
4
0
]
CUSTOM  
MIRROR  
31. Image recording and loading indicator  
32. Quality  
MEMORY CARD  
!
33. ERASE PROTECTION indicator (see page 86)  
34. Print Mark(see page 85)  
SHUTTER  
EXPOSURE  
2
0
:
0
0
1
1
.
N
O
V
.
2
0
0
35. SLIDE SHOW  
Turning the OSD on/off (On Screen Display)  
When you set the power switch to CAM, the OSD is automatically turned on.  
When you set the power switch to VCR, the OSD is automatically turned on.  
OSD in M.PLAY mode  
Turning OSD on/off  
Press the DISPLAY button on the rear side panel.  
35  
33  
34  
0
0
0
[
SLIDE  
- Each press of the button toggles the OSD function on and off.  
- When you turn the OSD off,  
2
2
/
2
4
0
]
MEMORY CARD  
!
In CAM mode: The STBY and REC modes are always displayed on the OSD,  
even when the OSD is turned OFF and the key input is displayed for 3 seconds  
then turned off.  
In VCR mode: When you press any keys like the Function key that are relative to  
VCR operation, the function is displayed on the OSD for 3 seconds before it turns off.  
2
0
:
0
0
1
0
0
0
-
0
0
0
0
1
.
N
O
V
.
2
0
0
28  
Turning on/off the DATE/TIME  
- The DATE/TIME is not affected when the OSD function is switched ON or OFF.  
- To turn the DATE/TIME on or off, access the menu and change the DATE/TIME mode.  
(see page 52 )  
- You may also use the Dial Navigator to turn the DATE/TIME ON or OFF.  
(only in CAM / M.REC mode)  
18  
ENGLISH  
Getting to Know Your Camcorder  
How to use the Remote Control  
Battery Installation for the Remote Control  
You need to insert or replace the lithium battery when :  
- You purchase the camcorder.  
- The remote control doesn’t work.  
Ensure that you insert the lithium cell correctly, following the + and - markings.  
Be careful not to reverse the polarity of the battery.  
Self Record using the Remote Control  
START/  
STOP  
COUTER  
RESET  
DISPLAY  
STILL  
WIDE  
SELF  
ZERO  
RETURN  
TIMER  
When you use the Self Timer function on the remote control, the recording begins  
automatically in 10 seconds.  
TELE  
STILL  
X2  
SLOW  
F.ADV  
self  
1. Set the camcorder to CAM mode.  
Timer  
2. Press the SELF TIMER button until the appropriate indicator is displayed in the viewfinder.  
3. Press the START/STOP button to start the timer.  
- After a 10 second wait, recording starts.  
- Press START/STOP again when you wish to stop recording  
19  
ENGLISH  
Preparation  
Adjusting the Hand Strap  
It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording.  
The hand strap enables you to :  
- Hold the camcorder in a stable, comfortable position.  
- Press the Zoom and START/STOP button without having to change the position of your hand.  
Hand strap  
a
a. Pull open the Hand Strap cover and release the Hand Strap.  
b. Adjust its length and stick it back onto the Hand Strap cover.  
c. Close the Hand Strap cover again.  
c
b
20  
ENGLISH  
Preparation  
Connecting a Power Source  
There are two types of power source that can be connected to your camcorder.  
- The AC Power Adapter and AC cord : used for indoor recording.  
- The battery Pack : used for outdoor recording.  
To use the AC Power adapter and the DC Cable  
1. Connect the AC Power adapter to the AC cord.  
4
2. Connect the AC cord to a wall socket.  
Power  
Switch  
Reference  
2
3
The plug and wall socket type may differ according to  
your resident country.  
1
3. Connect the DC cable to the DC jack socket of the camcorder.  
4. Set the camcorder to each mode by holding down the tab  
on the power switch and turning it to the CAM, VCR,  
M.REC, M.PLAY mode.  
21  
ENGLISH  
Preparation  
Using the Lithium Ion Battery Pack  
The amount of continuous recording time available depends on :  
-
-
The type and capacity of the battery pack you are using.  
How often the Zoom function is used.  
It is recommended that you have several batteries available.  
Charging the Lithium Ion Battery Pack  
4
1. Attach the battery pack to the camcorder.  
2. Connect the AC Power adapter to an AC cord and connect  
the AC cord to a wall socket.  
3. Connect the DC cable to the DC  
jack socket on the camcorder.  
1
4. Turn the Camera power switch to off, and the charging  
indicator will start to flash showing that the battery is  
charging.  
2
3
Blinking time  
Charging rate  
Less than 50%  
Once per second  
Twice per second  
50% ~ 75%  
Three times per seconde  
Blinking stop and stays on  
75% ~ 90%  
90 ~ 100%  
On for a second and  
off for a second  
Error - Reset the battery and the  
DC cable  
5. When the battery is fully charged, disconnect the battery and the AC Power adapter from the camcorder.  
Even with the power switched off, the battery will still discharge if it is left connected to the camcorder.  
Reference  
The battery pack may be charged a little at the time of purchase.  
To prevent reduction in the life and capacity of the battery pack, always remove it from the camcorder after  
it is fully charged.  
22  
ENGLISH  
Preparation  
Using the Lithium Ion Battery Pack  
Table of continuous recording time based on model and battery type.  
If you close the LCD screen, it switches off and the EVF switches on automatically.  
The continuous recording times given in the table above are approximations.  
Actual recording time depends on usage.  
Time  
Continuous recording time  
Charging  
time  
LCD ON  
EVF ON  
Battery  
Approx.  
1hr  
Approx.  
1hr 30min  
Approx.  
1hr 30min  
SB-L70  
Approx.  
2hr  
Approx.  
1hr 30min  
Approx.  
2hr  
SB-L110  
SB-L220  
Approx.  
3hr 30min  
Approx.  
3hr 10min  
Approx.  
4hr 10min  
Reference  
The battery pack should be recharged in an environment of between 32°F (0°C) and 104°F (40°C).  
The battery pack should never be charged in a room temperature that is below 32°F (0°C).  
The life and capacity of the battery pack will be reduced if it is used in temperatures below 32°F (0°C) or  
left in temperatures above 104°F (40°C) for a long period, even when it is fully recharged.  
Do not put the battery pack near any heat source (fire or flames, for example).  
Do not disassemble, process, pressure, or heat the Battery Pack.  
Do not allow the + and - terminals of the battery pack to be short-circuited.  
It may cause leakage, heat generation, induce fire and overheating.  
23  
ENGLISH  
Preparation  
Battery level display  
The battery level display indicates the amount of power remaining  
in the battery pack.  
a
b
c
a. Fully charged  
b. 20~40% used  
c. 40~80% used  
d. 80~95% used  
d
e
e. Completely used (flickers)  
(The camcorder will turn off soon, change the battery as soon as possible)  
Please refer to the table on page 23 for approximate continuous recording times.  
The recording time is affected by environmental temperature and conditions.  
The recording time becomes very short in a cold environment. The continuous  
recording times in the operating instructions are measured using a fully charged  
battery pack at 77°F(25°C). As the environmental temperature and conditions may  
differ when you actually use the camcorder, the remaining battery time may not be  
the same as the approximate continuous recording times given in these instructions.  
24  
ENGLISH  
Preparation  
Inserting and Ejecting a Cassette  
There are three types of Mini DV CASSETTE tapes: DVM80, DVM60 and DVM30.  
When inserting a tape or closing a cassette holder, do not apply excessive force.  
This may cause a malfunction.  
Do not use any tapes other than Mini DV CASSETTES.  
1. Connect a power source and slide the TAPE EJECT switch and open  
1
2
4
the cassette door.  
REV  
-
The cassette holding mechanism rises automatically.  
S.SHOW  
FWD  
2. When you see the writing-proof tab, insert a tape into the holder with its  
window panel outside.  
3. Press the area carved PUSH on the cassette holding mechanism until  
it clicks into place.  
DELETE  
3
-
The cassette is loaded automatically.  
4. Close the cassette door.  
-
Close the door completely until you can hear a “click” inside.  
Otherwise it could easily open in the middle of operation so that  
it may cause a break off.  
push  
Reference  
a. SAVE  
b. REC  
When you have recorded something that you wish to keep, you can protect it so  
that it will not be accidentally erased.  
a. Protecting a tape :  
Push the safety tab on the cassette so that the hole is uncovered.  
b. Removing the tape protection :  
If you no longer wish to keep the recording on the cassette, push the write-protect tab  
back so that it covers the hole.  
How to keep a tape  
a. Avoid places with magnets or magnetic interference.  
b. Avoid humidity and dust prone places.  
c. Keep the tape in an upright position and avoid storing it in direct sunlight.  
d. Avoid dropping or knocking your tapes.  
25  
ENGLISH  
Basic Recording  
Making your First Recording  
1. Connect a Power source to the camcorder. (see page 21)  
(A battery pack or a AC power adapter)  
1
2
Insert a cassette. (see page 25)  
S
S
A
A
M
M
S
S
U
U
N
N
G
G
2. Remove the LENS CAP and hook it onto the hand strap.  
3. Set the power switch to the CAM position.  
Open the LCD monitor and make sure that STBY is  
displayed.  
If the protection tab of the cassette is open, STOP and  
PROTECTION! will be displayed.  
Make sure the image you want to record appears in the  
LCD monitor or viewfinder.  
Make sure the battery level indicates that there is enough  
remaining power for your expected recording time.  
4
3
4. To start recording, press the START/STOP button.  
REC is displayed in the LCD.  
To stop recording, press the START/STOP button again.  
STBY is displayed in the LCD.  
26  
ENGLISH  
Basic Recording  
When a cassette is loaded and the camcorder is left in the STBY mode for more than 5 minutes without being used,  
it will switch off automatically.  
To use it again, push the START/STOP button or set the Power switch to OFF and then back to CAM.  
This Auto Power off feature is designed to save battery power.  
Edit Search  
You can view a recording using the EDIT +, -- function in STBY mode.  
EDIT -- enables you to play the recording backwards and EDIT + enables you  
to play it forwards, for as long as you keep each button pressed down.  
S.SHOW  
FWD  
DELETE  
If you press the EDIT -- button quickly in STBY mode, your camcorder will play  
in reverse for 3 seconds and return to the original position automatically.  
Reference  
REV  
Mosaic shaped distortion may appear on the screen while in edit search  
mode.  
S.SHOW  
27  
ENGLISH  
Basic Recording  
Hints for Stable Image Recording  
While recording, it is very important to hold the camcorder correctly.  
Fix the LENS cap firmly by clipping it to the hand strap. (refer to the figure)  
Recording with the LCD monitor  
1. Hold the camcorder firmly using the hand strap.  
2. Place your right elbow against your side.  
3. Place your left hand under or beside the LCD to support and adjust it.  
Do not touch the built-in microphone.  
4. Choose a comfortable, stable position for the shots that you are taking.  
You can lean against a wall or on a table for greater stability.  
Do not forget to breathe gently.  
5. Use the LCD frame as a guide to determine the horizontal plane.  
6. Whenever possible, use a tripod.  
Recording with the Viewfinder  
1. Hold the camcorder firmly using the hand strap.  
2. Place your right elbow against your side.  
3. Place your left hand under the camcorder to support it.  
Be sure not to touch the built-in microphone.  
4. Choose a comfortable, stable position for the shots that you are taking.  
You can lean against a wall or on a table for greater stability.  
Do not forget to breathe gently.  
5. To view an object through the viewfinder, pull it out until you hear the ‘click’ sound.  
Excessive force may cause damages to the viewfinder.  
6. Place your eye firmly against the viewfinder eyecup.  
7. Use the viewfinder frame as a guide to determine the horizontal plane.  
8. Whenever possible, use a tripod.  
28  
ENGLISH  
Basic Recording  
Adjusting the LCD  
Your camcorder is equipped with a 2.5 inch color Liquid Crystal Display(LCD) screen, which enables you to  
view what you are recording or playing back directly.  
Depending on the conditions under which you are using the camcorder (indoors or outdoors for example),  
you can adjust ;  
BRIGHT SELECT  
BRIGHT ADJUST  
COLOUR ADJUST  
1. Set the POWER switch to CAM position.  
In the VCR mode, you may only setup the LCD while  
the tape is playing.  
CAM  
Mode  
2. Open the LCD screen, and the LCD switches on.  
3. Press the MENU button.  
CAM MODE  
INITIAL  
CAMERA  
A/V  
CAM MODE  
VIEWER SET  
4. Turn the MENU DIAL so that VIEWER is highlig- hted and that  
Push the MENU DIAL.  
LCD ADJUST  
DATE / TIME  
TV DISPLAY  
MEMORY  
VIEWER  
LCD ADJUST  
DATE/TIME  
TV DISPLAY  
5. Turn the MENU DIAL so that LCD ADJUST is highlighted.  
6. Push the MENU DIAL to enter the sub-menu.  
CAM MODE  
VIEWER SET  
7. Turn the MENU DIAL so that it highlights the menu item you want to  
adjust (BRIGHT SELECT, BRIGHT ADJUST, COLOUR ADJUST).  
LCD ADJUST  
BRIGHT SELECT . . . . NORMAL  
BRIGHT ADJUST . . . . . . [ 1 8 ]  
COLOUR ADJUST . . . . . [ 0 4 ]  
29  
ENGLISH  
Basic Recording  
8. Push the MENU DIAL again.  
You may select NORMAL or SUPER in the BRIGHT SELECT feature and push the MENU DIAL  
to save the setting.  
Use the MENU DIAL to adjust the value of BRIGHT ADJUST and COLOUR ADJUST.  
You can set values for BRIGHT ADJUST between 00 ~ 35 and COLOUR ADJUST between 00 ~ 07.  
9. Press the MENU button to finish the setting.  
Using the VIEWFINDER  
The VIEWFINDER is not working as long as the LCD is open.  
In order to bring it into focus, pull forward the viewfinder before you use it.  
Adjusting the Focus  
Use the focus adjustment knob of the VIEWFINDER to focus the picture. (refer to figure )  
30  
ENGLISH  
Basic Recording  
Playing back a tape you have recorded on the LCD  
You can monitor the playback picture on the LCD monitor.  
Make sure that the battery pack is in place.  
1
1. Hold down the tab of the Power switch and turn  
it to the VCR position.  
2
2. Insert the tape you wish to view. (see page 25)  
3. Open the LCD screen.  
Adjust the angle of the LCD screen and set the brightness or colour if necessary.  
4. Press the  
(REW) button to rewind the tape to the starting point.  
4
To stop rewinding, press the  
(STOP) button.  
The camcorder stops automatically after rewinding is complete.  
5. Press the  
(PLAY/STILL) button to start playback.  
REW  
You can view the picture you recorded on the LCD.  
To stop the PLAY operation, press the  
(STOP) button.  
Reference  
You can also view the picture on a TV screen, after connecting the camcorder  
to a TV or VCR. (see page 66)  
Various functions are available in playback mode. (see page 68)  
31  
ENGLISH  
Basic Recording  
Adjusting the LCD during PLAY  
You can adjust the LCD during playback.  
The adjustment method is the same procedure as used in CAM mode. (see page 29)  
Controlling Sound from the Speaker  
The Speaker works in VCR mode only.  
When you use the LCD screen for playback, you can hear the recorded sound from  
REV  
the built-in Speaker.  
2
-
-
Follow the instructions below to decrease or mute speaker volume in the VCR mode.  
Take the following steps to lower the volume or mute the sound while playing a tape  
on the VCR.  
S.SHOW  
FWD  
DELETE  
1. Set the power switch to VCR mode.  
2. Press (PLAY/STILL) to play the tape.  
3-1  
3. When you hear sounds once the tape is in play, use the MENU DIAL to adjust the volume.  
A volume level display will appear on the LCD.  
Levels may be adjusted from anywhere between 00 to 19 and you will not hear  
any sound when the volume is set on 00.  
If you close the LCD while playing, you will not hear sound from the speaker.  
<3-2>  
0
:
2
3
:
4
7
5
5
min  
VOL.  
[
1
1
]
1
.
2
:
0
0
0
1
1
.
N
O
V
2
0
32  
ENGLISH  
Advanced Recording  
Use of various Functions  
Setting menu items  
MENU  
SUB MENU  
MODE switch  
C/V/MR/MP  
INITIAL  
CLOCK SET  
REMOCON  
C/V/MR/MP  
C/V/MR/MP  
MR  
BEEP SOUND  
SHUTTER SOUND  
DEMONSTRATION  
C
CAMERA  
PROGRAM AE  
WHT. BALANCE  
D. ZOOM  
C/MR  
C/MR  
C/MR  
C/MR  
C/MR  
C/MR  
EIS  
DSE SELECT  
CUSTOM. Q  
REC MODE  
C/V  
V
A/V  
PHOTO SEARCH  
PHOTO COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
V
C/V  
V
C/V  
QUALITY  
PRINT MARK  
PROTECT  
DELETE  
V/MR  
MP  
MEMORY  
(VP-D190/  
D190i only)  
MP  
MP  
MP  
FORMAT  
LCD ADJUST  
DATE/TIME  
TV DISPLAY  
C/V/MR/MP  
C/V/MR/MP  
C/V/MR/MP  
VIEWER  
C : CAM MODE  
MR : M.REC MODE  
V : VCR MODE  
MP : M.PLAY MODE  
Set the camcorder to CAM or VCR mode and M.REC or  
M.PLAY mode (VP-D190/D190i only)  
1. Press the MENU button.  
The MENU OSD is displayed. The cursor ( HIGHLIGHT ) indicates the feature you are currently adjusting.  
2. Using the MENU DIAL and Push the MENU DIAL on the rear side panel, select and activate the item.  
3. You can exit the menu mode by pressing the MENU button.  
33  
ENGLISH  
Advanced Recording  
Availability of functions in each mode  
Digital  
special  
effects  
Requested  
Mode  
Digital functions  
D.ZOOM  
O
Operating  
Mode  
EIS  
PHOTO  
EIS  
O
O
O
O
D.ZOOM  
O
O
PHOTO  
Digital Special Effects  
O
O
O : The requested mode will work in this operating mode.  
:You can not change the requested mode.  
Reference  
When a menu item on the LCD is marked with an X, that item cannot be activated.  
When you select an item that cannot be changed, a guide message will be displayed.  
RESET  
If you push the RESET button, the settings of LCD MENU is changed  
to the default settings.  
Push the RESET button by using an object with sharp point such as a  
pin.  
34  
ENGLISH  
Advanced Recording  
CLOCK SET  
CLOCK setup works in CAM, VCR, M.REC and M.PLAY modes.  
The DATE/TIME is automatically recorded onto a tape.  
Before recording, please set the DATE/TIME.  
1. Press the MENU button.  
CAM MODE  
INITIAL CLOCK SET  
The menu list will appear.  
CAMERA  
A/V  
REMOCON  
BEEP SOUND  
2. Turn the MENU DIAL to highlight INITIAL and Push the MENU DIAL.  
3. Use the MENU DIAL to select CLOCK SET from the submenu.  
4. Push the MENU DIAL to enter SETTING mode.  
MEMORY SHUT SOUND  
VIEWER DEMO  
A blinking item indicates the item to be changed. The year will blink first.  
CAM MODE  
INITIAL SET  
5. Using the MENU DIAL, change the year setting.  
CLOCK SET  
REMOCON  
BEEP SOUND  
SHUTTER SOUND  
DEMONSTRATION  
6. Push the MENU DIAL.  
The month will blink.  
7. Using the MENU DIAL, change the month setting.  
8. Push the MENU DIAL.  
The day will blink.  
CAM MODE  
INITIAL SET  
9. You can set the day, hour and minute following the same procedure for setting  
year and month.  
t h e  
CLOCK SET  
10.Push the MENU DIAL after setting the minutes.  
0
0
:
0
0
The word COMPLETE! will on, and a few seconds later, the menu screen will  
automatically return to the sub menu.  
01. JAN. 2001  
11.To exit, press the MENU button.  
35  
ENGLISH  
Advanced Recording  
REMOCON  
THE REMOCON function works in CAM, VCR, M.REC, M.PLAY modes.  
The REMOCON option allows you to able or disable the remote control for operating the camcorder.  
1. Press the MENU button.  
The menu list will appear.  
CAM MODE  
INITIAL  
CAMERA  
A/V  
CLOCK SET  
REMOCON  
BEEP SOUND  
MEMORY SHUT SOUND  
VIEWER DEMO  
2. Turn the MENU DIAL to highlight INITIAL and Push the MENU DIAL.  
3. Use the MENU DIAL to select REMOCON from the submenu.  
4. Push the MENU DIAL to able or disable the remote control.  
CAM MODE  
INITIAL SET  
The setting switches from ON/OFF each time you Push the MENU DIAL.  
CLOCK SET  
REMOCON  
BEEP SOUND  
SHUTTER SOUND  
DEMONSTRATION  
5. To exit, press the MENU button.  
If you setup the remote control use setup to OFF, when you use a remote control,  
the remote control icon will blink for 3 seconds and disappear on the LCD.  
36  
ENGLISH  
Advanced Recording  
BEEP SOUND  
THE BEEP SOUND function works in CAM, VCR, M.REC, M.PLAY modes.  
Use the MENU, to setup the BEEP SOUND function. Select whether or not you want to  
hear a beep sound whenever you change a setup value.  
1. Press the MENU button.  
The menu list will appear.  
CAM MODE  
INITIAL  
CAMERA  
A/V  
CLOCK SET  
REMOCON  
BEEP SOUND  
MEMORY SHUT SOUND  
VIEWER DEMO  
2. Turn the MENU DIAL to highlight INITIAL and push the MENU DIAL.  
3. Use the MENU DIAL to select BEEP SOUND from the submenu.  
4. Push the MENU DIAL to able or disable the BEEP SOUND.  
CAM MODE  
INITIAL SET  
The setting switches from ON/OFF each time you push the MENU DIAL.  
You will hear a Beep Sound when you select the ON setup.  
When you press the START button to get started, the BEEP SOUND is  
automatically set to OFF so you can’t hear it any longer.  
CLOCK SET  
REMOCON  
BEEP SOUND  
SHUTTER SOUND  
DEMONSTRATION  
5. To exit, press the MENU button.  
37  
ENGLISH  
Advanced Recording  
SHUTTER SOUND  
You can hear SHUTTER SOUND only when the PHOTO function is working.  
Determines whether or not you wish to hear a SHUTTER SOUND when filming digital.  
1. Set the camcorder to M.REC mode.  
M.REC MODE  
2. Press the MENU button.  
INITIAL  
CAMERA  
A/V  
MEMORY SHUT SOUND  
VIEWER DEMO  
CLOCK SET  
REMOCON  
BEEP SOUND  
The menu list will appear.  
3. Turn the MENU DIAL to highlight INITIAL and push the MENU DIAL.  
4. Use the MENU DIAL to select SHUTTER SOUND from the submenu.  
M.REC MODE  
INITIAL SET  
5. Push the MENU DIAL to decide if you use SHUTTER SOUND.  
ON/OFF is shifted every time you push the MENU DIAL.  
CLOCK SET  
REMOCON  
BEEP SOUND  
SHUTTER SOUND  
DEMONSTRATION  
6. To exit, press the MENU button.  
38  
ENGLISH  
Advanced Recording  
DEMONSTRATION  
Demonstration automatically shows you the major functions that are included with  
your camcorder so that you may use them more easily.  
The DEMONSTRATION function may only be used in the CAM mode without a tape  
inserted in the camcorder.  
The demonstration operates repeatedly until the DEMONSTRATION mode switched  
OFF.  
1. Set the camcorder to CAM mode.  
2. Press the MENU button.  
CAM MODE  
INITIAL CLOCK SET  
CAMERA  
A/V  
REMOCON  
BEEP SOUND  
MEMORY SHUT SOUND  
VIEWER DEMO  
The menu list will appear.  
3. Turn the MENU DIAL to highlight INITIAL.  
4. Select DEMONSTRATION from the submenu and push the MENU DIAL.  
5. To activate the DEMONSTRATION set DEMONSTRATION ON.  
CAM MODE  
INITIAL SET  
CLOCK SET  
REMOCON  
BEEP SOUND  
SHUTTER SOUND  
DEMONSTRATION  
Press the menu button to quit the menu.  
The demonstration will begin.  
6. To end the DEMONSTRATION, set the DEMONSTRATION to OFF.  
Reference  
The DEMONSTRATION function only works without a TAPE installed.  
The DEMONSTRATION mode is automatically activated when the camcorder is left idle  
for more than 10 minutes after switc- hing to the CAM mode (no tape is inserted in the  
camcorder).  
If you press other keys (FADE, BLC, PHOTO, EASY, CUSTOM) during the  
DEMONSTRATION mode, the DEMONSTRATION stops temporarily and the  
demonstration resume if you do not operate any other functions within 10 minutes.  
39  
ENGLISH  
Advanced Recording  
PROGRAM AE  
The PROGRAM AE function works in CAM or M.REC mode only.  
The PROGRAM AE mode allows you to adjust shutter speeds and apertures to  
suit different shooting conditions.  
They give you creative control over the depth of field.  
AUTO mode  
-
-
-
Auto balance between the subject and the background.  
To be used in normal conditions.  
The shutter speed automatically varies from 1/50 to 1/250 per second, depending on the scene.  
SPORTS mode (  
)
-
For recording people or objects moving quickly.  
PORTRAIT mode (  
)
-
-
-
For focusing on the background of the subject, when the background is out of focus.  
The PORTRAIT mode is most effective when used outdoors.  
The shutter speed automatically varies from 1/50 to 1/1000 per second.  
SPOTLIGHT mode (  
)
-
For recording correctly when there is only light on the subject and not the rest of the picture.  
SAND/SNOW mode (  
)
-
For recording when people or objects are darken than the background because of reflected light  
from sand or snow.  
HSS mode (  
)
-
For recording fast-moving subjects such as players in golf or tennis games.  
40  
ENGLISH  
Advanced Recording  
Setting the PROGRAM AE  
1. Press the MENU button.  
CAM MODE  
INITIAL  
The menu list will appear.  
PROGRAM AE  
WHT. BALANCE  
D.ZOOM  
EIS  
DSE SELECT  
CUSTOM  
CAMERA  
A/V  
MEMORY  
VIEWER  
2. Turn the MENU DIAL to highlight CAMERA and Push the MENU DIAL.  
3. Select PROGRMA AE from the submenu.  
480x  
4. Push the MENU DIAL to enter the sub-menu.  
CAM MODE  
CAM MODE  
5. Using the MENU DIAL, select the PROGRAM AE mode.  
CAMERA SET  
CAMERA SET  
Push the MENU DIAL to confirm the PROGRAM AE mode.  
PROGRAM AE  
PROGRAM AE  
WHT.BALANCE  
D.ZOOM  
AUTO  
SPORTS  
PORTRAIT  
SPOTLIGHT  
EIS  
DSE SELECT  
CUSTOM  
6. To exit, press the MENU button.  
SAND / SNOW  
HSS  
41  
ENGLISH  
Advanced Recording  
WHT. BALANCE (WHITE BALANCE)  
The WHITE BALANCE function works in CAM or M.REC mode only.  
The WHITE BALANCE is a recording function that preserves the unique color of the object in any recording  
condition.  
You may select the appropriate WHITE BALANCE mode to obtain good quality color of the image.  
AUTO ( ) : This mode is generally used  
to control the WHITE BALANCE automatically.  
HOLD ( ) :This fixes the current WHITE BALANCE value.  
INDOOR ( ) : This controls the WHITE BALANCE according to the indoor ambience.  
OUTDOOR ( ) : This controls the WHITE BALANCE according to the outdoor ambience.  
CAM MODE  
INITIAL  
PROGRAM AE  
WHT. BALANCE  
D.ZOOM  
EIS  
DSE SELECT  
CUSTOM  
CAMERA  
A/V  
MEMORY  
VIEWER  
1. Set the camcorder to CAM mode.  
2. Press the MENU button.  
480x  
The menu list will appear.  
3. Turn the MENU DIAL to highlight CAMERA and Push the MENU DIAL.  
4. Select WHT.BALANCE from the submenu.  
CAM MODE  
CAMERA SET  
PROGRAM AE  
WHT. BALANCE  
D. ZOOM  
EIS  
DSE SELECT  
CUSTOM  
5. Push the MENU DIAL to enter the sub-menu.  
6. Using the MENU DIAL, select the WHITE BALANCE mode.  
Push the MENU DIAL to confirm the WHITE BALANCE mode.  
CAM MODE  
CAMERA SET  
7. To exit, press the MENU button.  
WHT. BALANCE  
AUTO  
HOLD  
INDOOR  
OUTDOOR  
42  
ENGLISH  
Advanced Recording  
Zooming In and Out with DIGITAL ZOOM  
Zoom works in CAM/M.REC mode only.  
Zooming In and Out  
The VP-D130/D130i/D190/D190i model offers a DUAL Zoom system for added convenience.  
Zooming is a recording technique that lets you change the size of the subject in a scene.  
For more professional looking recordings, do not use the zoom function too often.  
You can zoom using variable zoom speeds.  
Use these features for different shots. Please note that over  
use of the zoom feature can lead to unprofessional looking results and a reduction of battery usage time.  
The dual zoom lever has the same function of the normal zoom lever but  
takes more time for zooming in and out.  
It is useful to use the dual zoom lever when you need a detailed  
zooming in and out.  
1. Move the zoom lever slightly for  
a gradual zoom, move it further for  
a high-speed zoom.  
Your zooming is monito- red on the OSD.  
2. T(Telephoto) side: Subject appears closer.  
3. W(Wide angle) side: Subject appears farther  
away.  
TELE  
WIDE  
Reference  
You can record a subject that is a minimum of 1 m (about 2.65 feet) away from the lens surface in the TELE position,  
or about 10 mm (about 0.5 inch) away in the WIDE position.  
43  
ENGLISH  
Advanced Recording  
Digital Zoom  
More than 12x zoom is achieved digitally.  
The picture quality may deteriorate depending on how  
much you zoom in on the subject.  
We recommend that you use the EIS feature with DIGITAL ZOOM for picture stability. (see page 45)  
1. Set the camcorder to CAM or M.REC mode.  
CAM MODE  
INITIAL  
CAMERA  
A/V  
MEMORY D ZOOM  
VIEWER  
PROGRAM AE  
WHT BALANCE  
2. Press the MENU button.  
The menu list will appear.  
EIS  
DSE SELECT  
CUSTOM  
3. Turn the MENU DIAL to CAMERA and push the MENU DIAL.  
4. Select D.ZOOM from the submenu.  
CAM MODE  
CAMERA SET  
5. Push the MENU DIAL to setup the 480x digital zoom function or to turn the feature OFF.  
6. To exit, press the MENU button.  
PROGRAM AE  
WHT. BALANCE  
D. ZOOM  
EIS  
DSE SELECT  
CUSTOM  
480x  
Reference  
If you use the digital zoom function, the picture quality may suffer relatively.  
44  
ENGLISH  
Advanced Recording  
EIS (Electronic Image Stabilizer)  
The EIS function works in CAM/M.REC mode only.  
EIS(Electronic Image Stabilizer) is a function that compensates for any shaking or hand movement while  
holding the camcorder (within reasonable limits).  
It provides more stable pictures when:  
Recording a small object close-up  
Recording and walking at the same time  
Recording through the window of a vehicle  
1. Set the camcorder to CAM mode.  
CAM MODE  
INITIAL  
2. Press the MENU button.  
PROGRAM AE  
CAMERA  
A/V  
MEMORY  
VIEWER  
WHT. BALANCE  
D.ZOOM  
The menu list will appear.  
480x  
EIS  
DSE SELECT  
CUSTOM  
3. Turn the MENU DIAL highlight to CAMERA and push the MENU DIAL.  
The sub menu list will appear.  
4. Turn the MENU DIAL to activate the EIS function, push the MENU DIAL.  
CAM MODE  
The EIS menu is changed to ON.  
CAMERA SET  
If you do not want to use the EIS function, set the EIS menu to OFF.  
PROGRAM AE  
WHT. BALANCE  
D. ZOOM  
480x  
EIS  
DSE SELECT  
CUSTOM  
5. To exit, press the MENU button.  
Reference  
It is recommended that you deactivate the shake compensation function when  
using a tripod.  
If you use the EIS function, the picture quality may suffer relatively.  
45  
ENGLISH  
Advanced Recording  
DSE(Digital Special Effects) SELECT  
The DSE function works in CAM and M.REC mode only.  
The digital effects enable you to give a creative look to your recording by adding various special effects.  
Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create.  
There are 9 DSE modes.  
a
ART mode  
a
c
e
g
i
b
This mode gives the images a coarse effect.  
b. MOSAIC mode  
This mode gives the images a mosaic effect.  
c. SEPIA mode  
d
This mode gives the images a reddish-brown pigment.  
d. NEGA mode  
This mode reverses the colors of the images creating a negative image.  
e. MIRROR mode  
f
This mode cuts the picture in half, using a mirror effect.  
f. BLK & WHT mode  
This mode changes the images to black and white.  
g. EMBOSS mode  
h
This mode creates a 3D effect (embossing).  
h. CINEMA mode  
This mode covers the upper/lower portions of the screen to give a cinematic effect.  
i. MAKE - UP mode  
This mode allows the images to be selected in red, green, blue or yellow colors.  
46  
ENGLISH  
Advanced Recording  
Selecting an effect  
1. Set the camcorder to CAM mode.  
2. Press the MENU button.  
CAM MODE  
INITIAL  
PROGRAM AE  
CAMERA  
A/V  
MEMORY  
VIEWER  
WHT. BALANCE  
D.ZOOM  
EIS  
480x  
The menu list will appear.  
DSE SELECT  
CUSTOM  
3. Turn the MENU DIAL to highlight CAMERA and push the MENU DIAL.  
4. Select DSE SELECT from the submenu.  
CAM MODE  
5. Push the MENU DIAL to enter the sub-menu.  
CAMERA SET  
PROGRAM AE  
WHT BALANCE  
D ZOOM  
EIS  
DSE SELECT  
CUSTOM  
6. Using MENU DIAL, select the DSE mode.  
480x  
Push the MENU DIAL to confirm the DSE mode.  
7. To exit, press the MENU button.  
CAM MODE  
CAMERA SET  
DSE SELECT  
OFF  
ART  
MOSAIC  
SEPIA  
NEGA  
MIRROR  
BLK&WHT  
47  
ENGLISH  
Advanced Recording  
CUSTOM.Q  
You can customize settings and save them for future use.  
The CUSTOM.Q function operates in the CAM and M.REC mode.  
If you want to use the CUSTOM.Q function (see page 58) correctly, set the status of each item as  
desired before using the CUSTOM.Q function.  
You can set and store the following items:  
PROGRAM AE, WHT.BALANCE, D.ZOOM, EIS, DSE SELECT  
1. Set the power switch to CAM mode.  
2. Press the MENU button.  
CAM MODE  
INITIAL  
PROGRAM AE  
WHT. BALANCE  
D.ZOOM  
CAMERA  
A/V  
MEMORY  
VIEWER  
480x  
The MENU list will appear.  
EIS  
DSE SELECT  
CUSTOM  
3. Turn the MENU DIAL, select CAMERA position and push the MENU DIAL.  
4. Select CUSTOM.Q using MENU DIAL in the submenu and push the MENU DIAL.  
5. Using the MENU DIAL and push the MENU DIAL, set the status of each item as desired.  
6. To exit the menu, press the MENU button.  
CAM MODE  
CAMERA SET  
PROGRAM AE  
WHT BALANCE  
D ZOOM  
480x  
EIS  
DSE SELECT  
CUSTOM  
Reference  
If you want to activate the CUSTOM.Q function, press the CUSTOM.Q button while  
in CAM mode.  
CAM MODE  
CAMERA SET  
The PROGRAM AE mode is automatically setup when the EXPOSURE is set on manual.  
CUSTOM  
PROGRAM AE  
WHT. BALANCE  
D. ZOOM  
480x  
EIS  
DSE SELECT  
48  
ENGLISH  
Advanced Recording  
REC MODE  
The REC MODE function works in both CAM and VCR modes.  
This camcorder records and plays back in SP (standard play) mode and in LP (long play) mode.  
SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape.  
LP (long play): This mode permits 90 minutes of recording time with a DVM60 tape.  
CAM MODE  
INITIAL  
1. Set the camcorder to CAM or VCR mode.  
2. Press the MENU button.  
CAMERA  
A/V  
REC MODE  
MEMORY PHOTO SEARCH  
The menu list will appear.  
VIEWER  
COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
12  
3. Turn the MENU DIAL to highlight A/V and push the MENU DIAL.  
4. Select REC MODE from the submenu and push the MENU DIAL.  
The REC MODE toggles between SP and LP with each push.  
5. To exit, press the MENU button.  
CAM MODE  
A / V SET  
REC MODE  
PHOTO SEARCH  
PHOTO COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
Reference  
12  
SOUND1  
OFF  
We recommend that you use this camcorder to play back any tapes  
recorded on this camcorder.  
Playing back a tape recorded in other equipment may produce mosaic shaped distortion.  
When you record in SP and LP modes on a tape or you record only some scenes in the LP mode,  
the playback picture may be distorted or the time code may not be written properly between scenes.  
Record using SP mode for best picture and sound quality.  
49  
ENGLISH  
Advanced Recording  
AUDIO MODE  
The AUDIO MODE function works in CAM and VCR modes.  
This camcorder records sound in two ways. (12bit, 16bit)  
12bit :You can record two 12bit stereo sound tracks.  
The original stereo sound can be recorded onto the MAIN (SOUND1) track.  
Additional stereo sound can be dubbed onto the SUB (SOUND2) track.  
16bit :You can record one high quality stereo sound using the 16bit recording mode.  
Audio dubbing is not possible when using this mode.  
CAM MODE  
INITIAL  
1. Set the camcorder to CAM mode.  
CAMERA  
A/V  
MEMORY PHOTO SEARCH  
REC MODE  
2. Press the MENU button.  
VIEWER  
COPY  
The menu list will appear.  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
12  
3. Turn the MENU DIAL to highlight A/V and push the MENU DIAL.  
4. Select the AUDIO MODE from the menu and push the MENU DIAL.  
CAM MODE  
The AUDIO MODE toggles between 12bit-16bit with each push.  
A / V SET  
REC MODE  
PHOTO SEARCH  
PHOTO COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
5. To exit, press the MENU button.  
12  
SOUND1  
OFF  
50  
ENGLISH  
Advanced Recording  
WIND CUT  
The WIND CUT function works in CAM and VCR modes.  
The WIND CUT function minimizes wind noise or other noise while recording.  
-
When the wind cut is on, some low sounds are eliminated along with the sound of the wind.  
1. Set the camcorder to CAM mode.  
2. Press the MENU button.  
CAM MODE  
INITIAL  
CAMERA  
A/V  
REC MODE  
The menu list will appear.  
MEMORY PHOTO SEARCH  
VIEWER  
COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
12  
3. Turn the MENU DIAL to highlight A/V and push the MENU DIAL.  
4. Select WIND CUT from submenu.  
CAM MODE  
5. This feature toggles ON/OFF each time you push the MENU DIAL.  
6. To exit, press the MENU button.  
A / V SET  
REC MODE  
PHOTO SEARCH  
PHOTO COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
12  
SOUND1  
OFF  
51  
ENGLISH  
Advanced Recording  
DATE/TIME  
The DATE/TIME function works in CAM, VCR, M.REC and M.PLAY modes.  
The date and time are automatically recorded on a special data area of the tape.  
You can choose to display - the OFF, DATE, TIME, DATE/TIME  
OFF only  
DATE only  
TIME only  
DATE & TIME  
CAM MODE  
INITIAL  
CAMERA  
A/V  
1. Press the MENU button.  
The menu list will appear.  
MEMORY  
VIEWER  
LCD ADJUST  
DATE / TIME  
TV DISPLAY  
2. Turn the MENU DIAL to highlight VIEWER and push the MENU DIAL.  
3. Turn the MENU DIAL to highlight DATE/TIME.  
CAM MODE  
4. Push the MENU DIAL to select the sub-menu.  
VIEWER SET  
LCD ADJUST  
DATE / TIME  
TV DISPLAY  
5. Using the MENU DIAL, select the DATE/TIME mode.  
To return to the previous menu, place the cur- sor on the return icon  
located at the lower part of the menu and Push the MENU DIAL.  
6. To exit, press the MENU button.  
Reference  
CAM MODE  
VIEWER SET  
DATE / TIME  
The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.  
The DATE/TIME will read “- - -” in the following conditions.  
DATE  
TIME  
DATE&TIME  
-
-
-
During playback of a blank section of a tape.  
If the tape was recorded before setting the DATE/TIME in the Camera’s memory.  
When the battery becomes weak or dead.  
52  
ENGLISH  
Advanced Recording  
TV DISPLAY  
The TV DISPLAY function works in CAM, VCR, M.REC, M.PLAY modes.  
You can select the output path of the OSD (On Screen Display).  
OFF: The OSD appears in the LCD screen only.  
ON: The OSD appears in the LCD screen, EVF and TV.  
Use the DISPLAY button located at the rear of the camcorder to turn ON/OFF all of  
the OSD displayed on the LCD/EVF/TV.  
1. Set the camcorder to CAM, VCR, M.REC, M.PLAY mode.  
CAM MODE  
INITIAL  
CAMERA  
A/V  
MEMORY  
VIEWER  
2. Press the MENU button.  
The menu list will appear.  
LCD ADJUST  
DATE / TIME  
TV DISPLAY  
3. Turn the MENU DIAL to highlight VIEWER and push the MENU DIAL.  
4. Select the TV DISPLAY mode in list, push the MENU DIAL.  
CAM MODE  
VIEWER SET  
The DISPLAY mode switches between ON/OFF with each push.  
LCD ADJUST  
DATE / TIME  
TV DISPLAY  
5. To exit, press the MENU button.  
53  
ENGLISH  
Advanced Recording  
Using Quick Menu  
Quick menu is available only in CAM mode.  
Quick menu is used to adjust to camera environments that are easily changing subject to photographing  
circumstances, working by the MENU DIAL manipulation.  
DATE/TIME  
Each time you select DATE/TIME and press the MENU DIAL, it’ll be displayed in the order of  
DATE - TIME - DATE/TIME - OFF(See page 52).  
-
REMOCON(  
Each time you select REMOCON and press the MENU DIAL, the REMOCON is switched to  
either enabled ( ) or disabled ( ) .  
)
-
EIS(  
)
-
Each time you select EIS and press the MENU DIAL, the EIS icon is displayed or set to OFF.  
DSE(Digital Special Effect) (see page 46)  
-
Each time you select DSE and press the MENU DIAL, the preset values of DSE is applied or set to OFF.  
You can’t change the values unless you preset values for DSE.  
PROGRAM AE (see page 40)  
-
Each time you select PROGRAM AE and press the MENU DIAL, the preset PROGRAM AE values and  
AUTO are switched to each other.You can’t change the values unless you preset the PROGRAM AE values.  
54  
ENGLISH  
Advanced Recording  
WHT. BALANCE(see page 42)  
-
Each time you select WHT. BALANCE and press the MENU DIAL, preset WHT.BLANCE values and  
AUTO are switch- ed to each other. As similar in the PROGAM AE, you can’t change the values unless  
you preset the WHT.BLANCE values,.  
SHUTTER SPEED & EXPOSURE  
-
You can set values for SHUTTER SPEED and EXPOSU- RE by selecting (  
the MENU DIAL. For more information, see the next chapter.  
) icon and pressing  
Setting the Quick menu  
1. Set the camcorder to CAM mode.  
CAM  
Mode  
2. Turn the MENU DIAL.  
You’ll see EIS icon first.  
3. Turn the MENU DIAL to select a function you want and then press  
the MENU DIAL to chan-ge the values to your favor.  
EIS  
STBY  
0
:
0
0
:
0
0
DSE  
MIRROR  
PROGRAM AE  
WHT. BALANCE  
REMOCON  
DATE/TIME  
SHUTTTER  
EXPOSURE  
SHUTTER  
EXPOSURE  
2
0
:
0
0
1
1
.
N
O
V
.
2
0
0
55  
ENGLISH  
Advanced Recording  
SHUTTER SPEED & EXPOSURE  
You can set SHUTTER SPEED and EXPOSURE only in CAM mode.  
SHUTTER SPEED and EXPOSURE are necessary only when you are working on the photographing so  
you can set them only through the QUICK MENU.  
SHUTTER SPEED and EXPOSURE are automatically switched and/or deactivated.  
When MANUAL EXPOSURE/SHUTTER SPEED is  
activated under where EXPOSURE is automatically activated, AUTO EXPOSURE becomes deactivated.  
1. Set the power switch to CAM mode.  
2
Turn the MENU DIAL until you see  
icon on, and then press the MENU DIAL.  
You see a screen on which you can select SHUTTER SPEED and EXPOSURE.  
Turn the MENU DIAL to select the item you want and then press the MENU DIAL.  
SHUTTER SPEED is available in 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000 or 1/10000.  
EXPOSURE is available in between 00 and 29.  
3. To exit from the setting screen, select the  
Reference  
icon and press the MENU DIAL.  
If you want to use the selected shutter speed and exposure value, you should begin the recording with  
the shutter speed and the exposure adjustment screens displayed on the LCD.  
If you manually change the shutter speed and the exposure value when Auto-exposure option is selected,  
manual changes are applied first.  
56  
ENGLISH  
Advanced Recording  
EASY Mode (for Beginners)  
The EASY mode allows a beginner to make good recordings easily.  
The EASY mode only operates in CAM mode.  
1. Set the power switch to CAM mode.  
2. By pressing the EASY button, all functions on the camera will be set to off and  
the recording settings will be set to the following basic modes:  
Battery level, recording mode, counter, DATE/TIME, and EIS (  
The word “EASY.Q” will appear on the LCD at the same time.  
) will be displayed.  
CUSTOM EASY  
However, the DATE/TIME will only be seen if it has been previously set. (see page 52)  
3. Press START/STOP to start recording.  
Recording will begin using the basic automatic settings.  
STOP  
EASY  
0
:
0
0
:
0
0
53 min  
4. Pressing the EASY button again turns the EASY mode off.  
The camera will return to the settings that were set prior to activating EASY mode.  
1
.
2
:
0
0
0
1
28  
.
SEP  
2
0
Reference  
In EASY mode, certain functions are not available, such as MENU, BLC, MF/AF.  
- If you want to use these functions, you must first switch the EASY mode off.  
The EASY mode settings are deleted when the battery is uninstalled from the camcorder and therefore, they  
must be reset when a battery has been replaced.  
57  
ENGLISH  
Advanced Recording  
CUSTOM Mode  
You can customize settings and save them for future use.  
The CUSTOM SET function operates in CAM mode only.  
Please set the custom settings before using this function. (see page 48)  
1. Set the power switch to CAM mode.  
2. To activate the CUSTOM function, press the CUSTOM button.  
“CUSTOM.Q” will be displayed on the screen.  
CUSTOM EASY  
3. Press START/STOP to start recording.  
Recording will begin using the CUSTOM settings.  
STBY  
0
:
0
0
:
0
0
CUSTOM  
MIRROR  
5
3
min  
4. To switch CUSTOM mode off, press the CUSTOM button again.  
The camcorder will revert to the settings that were set prior to  
custom mode being selected.  
2
0
:
0
0
0
1
.
N
O
V
.
2
0
1
Reference  
The CUSTOM mode settings are deleted when a battery is uninstalled and  
therefore they must be reset when a battery has been replaced.  
58  
ENGLISH  
Advanced Recording  
MF/AF (Manual Focus/Auto Focus)  
The MF/AF function works in CAM and M.REC mode only.  
In most situations, it is better to use the automatic focus  
feature, as it enables you to concentrate on the creative side of your recording.  
Manual focusing may be necessary under certain conditions that make automatic focusing difficult  
and/or unreliable.  
Auto Focusing  
If you are inexperienced in the use of camcorders, we recommend that you make  
use of Auto Focus.  
Manual Focusing  
In the following cases you could obtain better results by adjusting  
the focus manually.  
a. A picture containing several objects, some close to the camcorder,  
REV  
S.SHOW  
FWD  
others further away.  
b. A person enveloped in fog or surrounded by snow.  
c. Very shiny or glossy surfaces like a car.  
2
MF/AF  
d. People or objects moving constantly or quickly like an athlete or a crowd.  
1. Set the power switch to CAM mode.  
3
2. Press the MF/AF(  
) button.  
3. Turn the MENU DIAL up or down until the object is in focus.  
Zoom out a little if focusing is difficult.  
4. To return to AF(Auto Focus), press the MF/AF button again.  
REV  
S.SHOW  
FWD  
4
MF/AF  
59  
ENGLISH  
Advanced Recording  
BLC (Back Light Compensation)  
BLC works in CAM/M.REC mode.  
Back lighting exists when the subject is darker than the background:  
The subject is in front of a window.  
The person to be shot is wearing white or shiny clothes and is placed against a bright  
background; the person’s face is too dark to distinguish his/her features.  
The subject is outdoors and the background is overcast.  
The light sources are too bright.  
The subject is against a snowy background.  
* BLC off  
* BLC on  
1. Set the power switch to CAM mode.  
2. Press the BLC button.  
Normal - BLC - Normal  
BLC only enhances the subject.  
REV  
S.SHOW  
FWD  
BLC  
DELETE  
60  
ENGLISH  
Advanced Recording  
Fade In and Out  
The FADE function works in CAM mode only.  
You can give your recordings a professional look by using  
special effects such as fading in at the beginning of a  
sequence or fading out at the end of a sequence.  
STBY  
0:00:00  
REV  
To Start Recording  
REC  
0:00:15  
1. Before shooting, hold down the FADE button.  
The picture and sound gradually disappear (fade out).  
2. Press the START/STOP button and at the same time release  
the FADE button. Recording starts and the picture and  
sound gradually appear (fade in).  
REC  
0:00:15  
REV  
To Stop Recording (use FADE IN / FADE OUT)  
S.SHOW  
STBY  
0:00:15  
3. When you wish to stop shooting, hold down the  
FADE button. The picture and sound gradually  
disappear (fade out).  
4. When the picture has disappeared, press the START/STOP  
button to stop recording.  
Press the FADE button  
a. FADE OUT  
Gradual disappearance  
a. FADE OUT (Approx. 4 seconds)  
b. FADE IN (Approx. 4 seconds)  
Gradual appearance  
b. FADE IN  
Release the FADE button  
61  
ENGLISH  
Advanced Recording  
Audio dubbing  
The AUDIO DUBBING function only works in VCR Mode.  
You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.  
Use the internal and external microphones or other audio equipment.  
The original sound will not be erased.  
Record the sound again using MIC dubbing.  
1. Set the camcorder to VCR mode.  
If you want to use the external micro-phone, connect the microphone to  
the external MIC input jack on the camcorder.  
When you wish to dub using the External A/V input, connect the AUDIO  
/VIDEO cable to the camcorder by inserting the cable jack into the A/V in/out  
terminal at the left side of the camcorder.  
2. Press the  
be dubbed.  
(PLAY/STILL) button and find the timeframe of the scene to  
3. Press the  
(PLAY/STILL) button to pause the scene.  
START/  
STOP  
WIDE  
PHOTO  
ZERO  
DISPLAY  
A.DUB  
4. Press the A.DUB button on the Remote Control.  
REV  
S.SHOW  
FWD  
SELF  
TIMER MEMORY  
A.DUB will be displayed on the LCD.  
TELE  
The camcorder is in a ready-to-dub state for dubbing.  
5. Press the  
(PLAY/STILL) button to start dubbing.  
STILL  
Press the (STOP) button to stop the dubbing.  
X2  
Reference  
You can not use the audio dubbing function while playing the video tape which is protected to write.  
When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio  
system from which you wish to record.  
You can not use the audio dubbing function while the A/V calbe is connected to TV.  
62  
ENGLISH  
Advanced Recording  
Dubbed audio Playback  
1. Insert the dubbed tape and press MENU button.  
2. Turn the MENU DIAL to highlight A/V.  
VCR MODE  
A / V SET  
3. Push the MENU DIAL to enter the sub-menu.  
REC MODE  
PHOTO SEARCH  
PHOTO COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
4. Use the MENU DIAL to select AUDIO SELECT from the submenu.  
5. Push the MENU DIAL to enter the sub-menu.  
12  
SOUND1  
OFF  
6. Using the MENU DIAL, select the AUDIO playback channel.  
VCR MODE  
A / V SET  
-
Push the MENU DIAL to confirm the audio playback channel.  
SOUND1 : play the original sound.  
AUDIO SELECT  
-
-
SOUND2 : play the dubbed sound.  
MIX(1+2) : playback an equally mixed sound of SOUND1 and 2.  
SOUND [ 1 ]  
SOUND [ 2 ]  
MIX [ 1 + 2 ]  
7. To exit, press the MENU button.  
8. Press the  
Reference  
(PLAY/STILL) button to playback the dubbed tape.  
When you playback added sound (SOUND2 or MIX mode), you may experience loss of  
sound quality or broken sounds.  
63  
ENGLISH  
Advanced Recording  
PHOTO Image Recording  
1. Press the PHOTO Button lightly (about halfway down) and hold it.  
The still picture appears on the LCD monitor.  
If you do not wish to record, simply release the pressure from the button.  
1
2. Press the PHOTO button fully down.  
The still picture is recorded for about 6~7 seconds.  
3. After the PHOTO has been recorded, the camcor- der returns to STBY mode.  
Reference  
2
If you use the PHOTO function, you may experience inferior picture quality.  
Searching for a PHOTO picture  
The PHOTO SEARCH works in VCR, M.PLAY mode only.  
1. Press the MENU button.  
VCR MODE  
INITIAL  
The menu list will appear.  
CAMERA  
A/V  
REC MODE  
2. Turn the MENU DIAL to highlight A/V.  
3. Push the MENU DIAL to enter the sub-menu.  
4. Select PHOTO SEARCH from the submenu and Push the MENU DIAL.  
MEMORY PHOTO SEARCH  
VIEWER  
COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
12  
5. Search the PHOTO using the  
(FWD) and  
The PHOTO search process appears on the LCD while you are searching.  
After completing the search, the camcorder displays the still image.  
(STOP) button.  
(REW) buttons.  
VCR MODE  
6. To exit, press the  
A / V SET  
REC MODE  
PHOTO SEARCH  
PHOTO COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
12  
SOUND1  
64  
ENGLISH  
Advanced Recording  
Various Recording Techniques  
In some situations different recording techniques may be required for more dramatic results.  
Reference  
Please rotate the LCD screen carefully as excessive rotation may cause damage to the inside of  
the hinge that connects the LCD screen to the Camcorder.  
1. General recording.  
1
2
4
2. Downward recording.  
Making a recording with a top view of the LCD screen.  
3. Upward recording.  
Making a recording viewing the LCD screen from below.  
3
4. Self recording.  
Making a recording viewing the LCD screen from the front.  
Reference  
When the LCD screen faces towards the front, indicators are turned off.  
5
5. Recording with the Viewfinder.  
In circumstances where it is difficult to use the LCD monitor,  
the viewfinder can be used as a convenient alternative.  
65  
ENGLISH  
Advanced Recording  
Tape Playback  
Audio input  
(left)-White  
To watch a recorded tape.  
Video input-  
Audio input  
(right)-Red  
Yellow  
TV  
The playback function works in VCR mode only.  
Camcorder  
S-VIDEO input  
Playback on the LCD  
S-VIDEO OUT  
A/V OUT  
It is practical to view a tape using the LCD in a car or outdoors.  
Playback on a TV monitor  
To play back a tape, the Television must have a compatible colour system.  
We recommend that you use the AC Power Adapter as the power source for the  
camcorder.  
Connecting to a TV which has Audio/Video input jacks  
1. Connect the camcorder and TV with the Audio/Video cable.  
The yellow plug : Video  
The white plug : Audio(L)  
The red plug : Audio(R) - STEREO only  
-
If you connect to a monaural TV or VCR, connect the yellow plug (Video) to the video input of  
the TV or VCR and the white plug (Audio L) to the audio input of the TV or VCR.  
You may use the supplied SCART adapter.  
2. Set the power switch on the camcorder to VCR mode.  
3. Turn on the TV and set the TV/VIDEO selector on the TV to VIDEO.  
Refer to the TV or VCR user’s manual.  
4. Play the tape back.  
Reference  
You may use the S-VIDEO cable to obtain better quality pictures if you have a S-VIDEO connector  
on your TV.  
Even if you use a S-VIDEO cable, you need to connect an audio cable.  
66  
ENGLISH  
Advanced Recording  
Connecting to a TV which has no Audio and Video input jacks  
You can connect your camcorder to a TV through a VCR.  
1. Connect the camcorder and VCR with the Audio/Video cable.  
VIDEO  
AUDIO(L)  
The yellow plug : Video  
The white plug : Audio(L)  
The red plug : Audio(R) - STEREO only  
VCR  
AUDIO(R)  
S-VIDEO  
S-VIDEO  
A/V OUT  
2. Connect a TV to the VCR.  
TV  
3. Set the power switch on the camcorder to VCR mode.  
4. Turn on both the TV and VCR.  
CAMCORDER  
ANTENNA  
Set the input selector on the VCR to LINE.  
Select the channel reserved for your VCR on the TV set.  
5. Play the tape back.  
Playback  
You can play the recorded tape in VCR mode.  
1. Connect a power source and set the power switch to VCR mode.  
2. Insert the tape you wish to play back.  
REV  
3. Using the  
you wish to play back.  
4. Press the (PLAY/STILL) button.  
(FWD) and  
(REW) buttons, find the first position  
S.SHOW  
FWD  
The images you recorded will appear on the TV after a few seconds.  
If a tape reaches its end while being played back, the tape will rewind automatically.  
DELETE  
Reference  
It is best to decrease the volume of the built-in speaker when your camcorder is  
connected to the TV.  
The playback mode (SP/LP) is selected automatically.  
67  
ENGLISH  
Advanced Recording  
Various Functions while in VCR mode  
The PLAY/STILL, STOP, FWD, REW buttons are located on the camcorder and the Remote Control.  
The F.ADV(Frame advance), X2, SLOW buttons are located on the Remote Control only.  
To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes for  
more than 5 minutes.  
Playback pause  
Press the  
(PLAY/STILL) button during Playback or Slow playback.  
To resume playback, press the  
(PLAY/STILL) button.  
Picture search (Forward/Reverse)  
Press the  
To resume normal playback, press the  
Keep pressing (FWD) or (REW) buttons during Playback or Still mode.  
(FWD) or  
(REW) buttons once during Playback or Still mode.  
REV  
(PLAY/STILL) button.  
S.SHOW  
FWD  
To resume normal playback, release the button.  
Slow playback (Forward/Reverse)  
DELETE  
Forward Slow Playback  
Press the SLOW button on the remote control during Playback.  
To resume normal playback, press the  
(PLAY/STILL) button.  
Reverse slow playback  
Press the  
To resume forward slow playback, press the  
(REW) button during Forward Slow Play back.  
(FWD) button.  
To resume normal playback, press the  
(PLAY/STILL) button.  
68  
ENGLISH  
Advanced Recording  
Frame advance (To play back frame by frame)  
Press the F.ADV button on the Remote Control while in Still mode.  
The F.ADV function works in still mode only.  
To resume normal playback, press the  
(PLAY/STILL) button.  
If you want to play the tape in reverse by one  
frame, pause the video tape by pushing the STILL button and change the direction into the reverse with  
STILL button again. Then push the F.ADV button on the remote control.  
START/  
COUTER  
RESET  
DISPLAY  
WIDE  
X2 Playback (Forward/Reverse )  
STOP  
SELF  
ZERO  
RETURN  
STILL  
TIMER  
Forward X2 Playback  
TELE  
Press the X2 button on the Remote Control during Playback.  
STILL  
To resume normal playback, press the  
Reverse X2 Playback  
(PLAY/STILL) button.  
X2  
SLOW  
F.ADV  
Press the  
(REW) button during Forward X2 Playback  
To resume normal playback, press the  
(PLAY/STILL) button.  
F.ADV  
Reference  
Mosaic shaped distortion may appear on the screen while in some of the various playback modes.  
-
Mosaic shaped distortion or noise may be experienced when you play back tapes recorded in LP which  
contain various playback functions.  
There is no sound when using some playback functions.  
69  
ENGLISH  
Advanced Recording  
ZERO MEMORY  
The MEMORY function works in both CAM and VCR modes.  
You can mark a point on a tape that you want to return to following playback.  
1. Press the ZERO MEMORY button on the remote control during playback or recording at the point you wish to return to.  
The time code is changed to a tape counter that is set to zero memory with the M 0:00:00(Zero memory indicator)  
If you want to cancel the zero memory function, press the ZERO MEMORY button again.  
2. Finding the zero position.  
When you have finished playback, fast forward or rewind the tape.  
The tape stops automatically when it reaches the zero position.  
When you have finished recording, press the power switch on the VCR and press the  
The tape stops automatically when it reaches the zero position.  
-
(REW) button.  
-
3. The tape counter with the M (Zero memory indicator) disappears from the display and the tape counter is  
changed to the time code.  
Reference  
In the following situations, ZERO MEMORY mode may be canceled automatically  
-
-
-
At the end of the section marked with the ZERO MEMORY function.  
When the tape is ejected.  
When you remove the battery pack or power supply.  
The zero memory may not function correctly where there is a break between recordings on the tape.  
The ZERO MEMORY will not operate in DV IN mode.  
70  
ENGLISH  
IEEE 1394 Data Transfer  
Transferring IEEE1394 (i.LINK)-DV standard data connections  
Connecting to a DV device  
Connecting with other DV standard products.  
A standard DV connection is quite simple. If a product has a DV port, you can transfer data by connecting to  
the DV port using the correct cable.  
!!! Please be careful since there are two types of DV ports, (4pin, 6pin). This camcorder has a 4pin terminal.  
With a digital connection, video and audio signals are transmitted in digital format, allowing high quality images  
to be transferred.  
Connecting to a PC  
If you want to transmit data to a PC, you must install a IEEE 1394 add-on card onto the PC. (not supplied)  
The frame rate recorded for video capturing is dependent on the capacity of the PC.  
Reference  
When you transmit data from the camcorder to another DV device, some functions may not work.  
In this case, please reconnect the DV cable or turn the power OFF and ON again.  
VP-D130i/D190i can receive digital data from another DV device.  
You can record a picture transferred over a DV connection on VP-D130i/D190i  
71  
ENGLISH  
IEEE 1394 Data Transfer  
System requirements  
CPU : faster Intel® Pentium IIITM 450Mhz compatible.  
Operating system : Windows® 98SE, ME, XP, Mac OS  
Main memory : more than 64 MB RAM  
IEEE1394 add-on card or built in IEEE1394 card  
Recording with a DV connection cable (VP-D130i/D190i only)  
1. Set the power switch to VCR mode.  
2. Connect the DV cable (not supplied) from the DV IN/OUT port of  
the camcorder to the DV IN/OUT port of the other DV device.  
Make sure that DV IN appears on the screen.  
3. Press the START/STOP button to begin REC PAUSE mode.  
PAUSE is displayed on the OSD.  
4. Start playback on the other DV device while you monitor the picture.  
5. Press the START/STOP button to start recording.  
If you want to pause recording momentarily, press the START/STOP button again.  
6. To stop recording, press the (STOP) button.  
Reference  
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,  
however recorded pictures are not affected.  
72  
ENGLISH  
USB interface  
Transferring a Digital Image through a USB Connection  
You can easily transfer a still image from a camera, tape, memory to a PC without additional add-on cards  
via a USB connection.  
You can transfer an image to a PC via a USB connection.  
If you transfer data to a PC, you need to install the software (Driver, Editing software) supplied with the camcorder.  
System Requirements  
CPU : Intel® Pentium IITM processor compatible or better  
Operating system : Windows® 98/98SE/ME/2000/XP  
RAM : 64 MB or more  
CD-ROM: 4x CD-ROM drive  
VIDEO : 65,000-colour or better video display card  
Available USB port  
Hard Disc : 4GB (8GB recommended)  
Reference  
Intel® Pentium IITM is a trademark of the Intel Corporation.  
Windows® is a registered trademark of the Microsoft® Corporation.  
All other brands and names are property of their respective owners.  
73  
ENGLISH  
USB interface  
Installing DVC Media Program  
Do not connect the camcorder to PC before installing the program.  
If another camera or scanner is connected, please disconnect it in advance.  
This explanation is based on Windows® 98SE OS.  
How to install the program  
1. The install program automatically operate when the CD is inserted into CD-ROM.  
Reference  
If the install program does not operate, please double click Install.exe in CD-ROM Drive.  
2. Click  
to install the program.  
3. Follow the instruction to install.  
74  
ENGLISH  
USB interface  
4. The below window displays the folder to install the program.  
4.  
Basically the program is installed in the following folder.  
C:\Programfiles\Samsung\DVC Media 2.0  
Click  
to change the folder.  
5. Connect the camcorder to PC.  
6.  
6. PC finds a new hardware and install a driver automatically.  
7. If the driver is installed, the install is completed.  
8. Execute DVC Media 2.0 player on the Windows wall paper.  
Reference  
DVC Media 2.0 User's Manual is included on the accompanying CD in Adobe's Portable Document Format (PDF).  
The user's manual can be viewed using Acrobat Reader software, which is also included on the CD.  
(The Acrobat Reader is a freeware product of Adobe Systems, Inc.)  
75  
ENGLISH  
USB interface  
Connecting to a PC  
1. Connect a USB cable to the USB port on the PC.  
2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack)  
3. Connect the audio cable to the Line input jack of the PC.  
If the PC has no Line input jack, connect the audio cable to the MIC input jack.  
In this case, however, a noise may be produced depending on the PC.  
Notes  
If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop  
and the data may be damaged.  
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other  
USB devices, the camcorder may not work properly.  
-
In this case, remove the other USB devices from the PC and reconnect the camcorder.  
USB Cable  
USB AUDIO Cable  
(VP-D130/D130i only)  
76  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
SmartMediaCard  
The SmartMediaCard (SMC), store and manage still images recorded by the camera.  
Functions with SMC  
Recording still images  
Viewing still images  
Terminal  
Single  
Slide show  
Protection  
tab  
3V 8MB  
Protecting images against accidental erasure  
Deleting images recorded on a card  
Print marking still images  
Formatting a card  
Reference  
You can use most of the camera’s functions when recording to a SMC.  
” appears on the screen while recording to card.  
While recording or loading an image, do not eject or insert a SmartMediaCard.  
Inserting or ejecting a SmartMediaCard while recording or loading an image can cause data damage.  
-
If you want to save all images on the SmartMediaCard, affix the protection label to the protection tab on  
the SmartMediaCard.  
77  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Inserting and ejecting the SmartMediaCard  
Inserting the card  
1. Turn the Power switch to OFF.  
2. Insert the SmartMediaCard into the CARD slot located beneath the camcorder,  
in the direction of the arrow.  
Ejecting the card  
1. Turn the Power switch to OFF.  
2. Slide down the Card Eject switch and pull out the card.  
Reference  
If you turn the power switch to M.PLAY, the last recorded image appears.  
If there are no recorded images on the SmartMediaCard, NO STORED IMAGE!  
and will display on the screen.  
-
Do not turn the power off while recording, loading, erasing or formatting.  
Please turn the power off before you insert or eject the SmartMediaCard.  
You could lose data on the SmartMediaCard.  
Do not allow metal substances to come in contact with the terminals of the Card.  
Do not bend the Card.  
After pulling the card out from the camcorder, please keep the SmartMediaCard in  
a soft case to prevent static shock.  
The stored contents may be changed or lost as a result of misuse, static electricity,  
electric noise or repair. Save important images separately.  
Samsung is not responsible for data loss due to misuse.  
If the USB cable is connected to the camcorder, the (DELETE),  
(REW) buttons are not available in M.PLAY mode.  
(S.SHOW),  
(FWD),  
78  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Structure of folders and files on the Smart Media Card  
The still images that you recorded are saved in JPEG file format on the card.  
Each file has a file number and all files are assigned to a folder.  
A file number from DCAM0001 to DCAM9999 is sequentially assigned to each recorded image.  
Each folder is numbered from 100SSDVC to 999SSDVC and recorded on the CARD.  
Image Format  
Images are compressed in JPEG (Joint Photographic Experts Group) format.  
DCIM  
The number of pixels are 640x480 (VGA) in each mode.  
100 SSDVC  
DCAM 0001  
DCAM 0002  
.
.
.
.
101SSDVC  
*MEM/P  
000-0000  
File number  
Folder number  
79  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Selecting the image quality  
You can select the quality of a still image to be recorded.  
Select the image quality  
1. Set the power switch on the M.REC or VCR mode.  
2. Press the MENU button.  
M.REC MODE  
INITIAL  
CAMERA  
A/V  
The menu list will appear.  
MEMORY QUALITY  
VIEWER  
PRINT MARK  
3. Turn the MENU DIAL to highlight MEMORY.  
4. Push the MENU DIAL to enter the sub-menu.  
5. Turn the MENU DIAL to highlight QUALITY in the submenu.  
6. Push the MENU DIAL.  
PROTECT  
DELETE  
FORMAT  
7. Using the MENU DIAL, select the image quality.  
Push the MENU DIAL to confirm the image quality.  
If you exit the sub-menu without Pushing the MENU DIAL,  
the quality mode is not changed.  
M.REC MODE  
MEMORY SET  
M.REC MODE  
MEMORY SET  
S.H.Q  
000  
QUALITY  
PRINT MARK  
PROTECT  
DELETE  
QUALITY  
S.H.Q  
H.Q  
FINE  
HIGH  
STANDARD  
8. To exit, press the MENU button.  
S.Q  
FORMAT  
Number of images on the SmartMediaCard.  
QUALITY  
FINE  
8MB Built-in memory  
Approx.60  
HIGH  
Approx.120  
STANDARD  
Approx.240  
-
The actual number that you can record varies depending on the image size.  
80  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Recording Still images to a SmartMediaCard in M.REC Mode.  
You cannot record moving Pictures onto a SmartMediaCard.  
Audio cannot be recorded onto the SmartMediaCard.  
M.REC  
Recording images to a SmartMediaCard.  
Y
M.REC  
Mode  
M.PLA  
1. Set the mode switch to M.REC.  
2. Press the PHOTO button lightly(about halfway down) and hold it.  
If you do not wish to record, release the pressure from the button.  
PHOTO  
3. Press the PHOTO button fully down.  
The still image is recorded to the SmartmediaCard.  
While the camcorder is recording the still image, “  
” appear on the screen.  
S.Q  
[ 2 2 / 2 4 0 ]  
81  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Recording an image from a cassette as a still image.  
You can record still image from a cassette onto a SmartMediaCard.  
If you want to recorded multiple still images from a cassette to a SmartMediaCard, use the COPY function.  
1. Set the power switch to VCR mode.  
2. Playback the cassette.  
3. Press the PHOTO button lightly(about halfway down) and press it, when the image you want to record appears.  
The tape is set to play back pause (STILL) mode.  
If you want to change the captures image without recording, release the PHOTO button and select image again.  
4. Press the PHOTO button fully down.  
The still image is recorded to the SmartmediaCard.  
While the camcorder is recording the still image, “  
” appear on the screen.  
82  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Viewing Still images  
You can playback and view still images recorded on the SmartMediaCard.  
There are 2 ways to view recorded images.  
Single : To view an image frame by frame.  
Slide show : To view all images automatically and in consecutive order.  
To view a Single image  
1. Set the power switch on the M.PLAY mode.  
The last recorded image appears.  
If there are no recorded images on the Smart Media Card, NO STORED IMAGE!  
and will display on the screen.  
2. Using the (FWD) and (REW) buttons, search for the desired still image.  
REV  
-
S.SHOW  
FWD  
To view the next image : press the  
To view the previous image : press the  
(FWD) button.  
(REW) button.  
DELETE  
Pressing  
pressing  
(FWD) when you are on the last image will take you to the first image and  
(REW) when you are on the first image will take you to the last image.  
Keep pressing  
(FWD) or  
(REW) to search for an image quickly.  
To view a slide show  
1. Set the power switch to M.PLAY mode.  
The last recorded image appears  
2. Press the (S.SHOW) button.  
All images will be played back consecutively one after the other for 4~5 seconds each.  
3. To stop the slide show, press the (S.SHOW) button again.  
83  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Copying still images from a cassette to SmartMediaCard  
You can copy still images with PHOTO function on a cassette onto a SmartMediaCard.  
1. Set the power switch to the VCR mode.  
2. Press the MENU button.  
VCR MODE  
INITIAL  
CAMERA  
A/V  
REC MODE  
MEMORY PHOTO SEARCH  
3. Turn the MENU DIAL to highlight A/V and push the MENU DIAL.  
VIEWER  
COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
16  
SOUND1  
The submenu will appear.  
4. Turn the MENU DIAL to highlight PHOTO COPY and push the MENU DIAL.  
All still images that recorded on a cassette will be copied to a SmartMediaCard.  
VCR MODE  
A / V SET  
5. The camcorder automatically performs the photo search to find still images and copying starts.  
REC MODE  
PHOTO SEARCH  
PHOTO COPY  
AUDIO MODE  
AUDIO SELECT  
WIND CUT  
6. Press  
(STOP) button to stop copying.  
16  
SOUND1  
Copying stops when the cassette is finished or SmartMediaCard is full.  
OFF  
84  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Marking on images for printing  
This camcorder supports the DPOF (Digital Print Order Format) print format.  
You can automatically print images recorded on a SmartMediaCard with a printer supporting DPOF.  
There are 2 ways to make a PRINT MARK.  
THIS FILE :You can set a print mark on the photo image displayed on the LCD.  
ALL FILES : To print 1 copy each of all of the stored images.  
1. Set the mode switch to M.PLAY mode.  
The last recorded image appears.  
2. Using the  
(FWD) and  
(REW) buttons, search for the still image that you want to mark.  
3. Press the MENU button.  
4. Turn the MENU DIAL to highlight MEMORY and Push the MENU DIAL.  
The MEMORY SET submenu will appear.  
5. Turn the MENU DIAL to highlight PRINT MARK, Push the MENU DIAL.  
6. Use the MENU DIAL to select either THIS FILE or ALL FILES and Push the MENU DIAL.  
7. Use the MENU DIAL to select the quantity and Push the MENU DIAL.  
Reference  
When you setup the PRINT MARK option to ALL FILES, 200 files from the current file are printed.  
The ALL FILES option may require extended operation time depending on the number of stored images.  
85  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Protection from accidental erasure  
You can protect important images from accidental erasure.  
If you execute FORMAT, all images including protected images will be erased.  
1. Set the power switch to M.PLAY.  
The last recorded image appears.  
If there are no recorded images on the Smart Media Card, NO STORED IMAGE! and  
will display on the screen.  
2. Using the (FWD) and (REW) buttons, search for the still image that you want to protect.  
3. Press the MENU button.  
4. Turn the MENU DIAL to highlight MEMORY and push the MENU DIAL.  
The submenu of MEMORY SET will appear.  
5. Turn the MENU DIAL to highlight PROTECT and push the MENU DIAL.  
6. Using the MENU DIAL, select the method and push the MENU DIAL.  
THIS FILE : protects the currently selected file from erasure.  
7. Using the  
(FWD) and  
(REW) buttons, search for the still image that you wish to protect.  
Deactivate the image protection for the image following step 5.  
8. To exit the menu, press the MENU button.  
86  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Deleting Still images  
You can erase the still images recorded on the SmartMediaCard.  
If you want to delete protected images, you must first deactivate the image protection.  
An image which has been deleted cannot be recovered.  
1. Set the power switch to M.PLAY.  
2. Using the  
(FWD) and  
(REW) buttons, search for the still image that you want to delete.  
3. Press the MENU button.  
4. Turn the MENU DIAL to highlight MEMORY and push the MENU DIAL.  
The MEMORY SET submenu will appear.  
5. Turn the MENU DIAL to highlight DELETE and push the MENU DIAL.  
Using the MENU DIAL, select either THIS FILE or ALL FILES and push the MENU DIAL.  
THIS FILE : deletes only the file currently selected.  
ALL FILES : deletes all files stored in the SmartMediaCard.  
6. A box will appear to verify whether you wish to delete the image(s).  
EXECUTE : deletes the selected image(s).  
CANCEL : does not delete the selected image(s) and returns to the previous menu.  
Reference  
If you try to delete a protected image, “Protect!” appears on the screen.  
You can delete the current displayed image (when still images are on) by pressing (DELETE) on the function keys.  
Pressing (DELETE) will see you “DELETE REALLY?”, and pressing again will delete the current image.  
87  
ENGLISH  
Digital Still Camera mode (VP-D190/D190i only)  
Formatting a SmartMediaCard  
You can use the MEMORY FORMAT functions to completely delete all images and options on a SmartMediaCard ,  
including protected images.  
The format function restores the SmartMediaCard to its initial states.  
The SmartMediaCard supplied with this camcorder has been formatted already.  
Attention  
If you execute the MEMORY FORMAT function, all images will be erased completely and erased images cannot be  
recovered.  
1. Set the mode switch to the M.PLAY mode.  
2. Press the MENU button.  
3. Turn the MENU DIAL to highlight MEMORY and Push the MENU DIAL.  
The sub menu will appear.  
4. Select FORMAT from the list and Push the MENU DIAL.  
5. “ALL FILES ARE DELETED! FORMAT REALLY?” appears on the screen.  
6. Using the MENU DIAL, select the item.  
NO : To return to previous menu  
YES : To start formatting.  
7. Push the MENU DIAL.  
8. To exit the menu, press the MENU button.  
88  
ENGLISH  
Maintenance  
After finishing a recording  
At the end of a recording you must remove the power source.  
When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span  
of the battery. Hence, it should be removed from the camcorder.  
After completing a recording session  
1. Slide the TAPE EJECT switch in the direction of the arrow.  
1
3
2
4
REV  
Opening the cassette door ejects the tape automatically.  
Please wait while the tape is completely ejected.  
S.SHOW  
FWD  
DELETE  
2. After removing the tape, close the door and store the camcorder in a dust free  
environment.  
Dust and other foreign materials can cause square-shaped noise or jerky  
images.  
OFF  
3. Set the power switch to the OFF mode.  
4. Disconnect the power source or remove the Lithium Ion Battery Pack.  
When disconnecting a power supply, separate it in the reverse order as connecting it,  
by referring to page 21.  
Hold down the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.  
89  
ENGLISH  
Maintenance  
Cleaning and Maintaining the Camcorder  
Cleaning the VIEWFINDER  
1. Pull the VIEWFINDER out.  
2. As shown in the illustration, press the fix button located on the left side of  
the camcorder section adjacent to the VIEWFINDER with a sharp object  
and pull the VIEWFINDER out.  
3. Clean the VIEWFINDER lens and the lens on the camcorder with  
a soft cotton swab.  
4. Once the cleaning is completed, place the VIEWFINDER back on to  
the camcorder.  
1
3
2
4
Cleaning the Video Heads  
To ensure normal recording and clear pictures, clean the video heads when  
the play- back pictures display square block-shaped noise or distortion or if only  
a blue screen appears during playback, as the video heads may be dirty.  
1. Set the power switch to VCR mode.  
2. Insert the cleaning tape.  
3. Press the  
(PLAY/STILL) button.  
4. Press the (STOP) button after 10 seconds.  
Reference  
Check the quality of the picture using a videocassette.  
If the picture quality has not improved, repeat the operation.  
If the problem continues, contact your local authorized service center.  
Clean the video heads with the dry type cassette cleaner.  
90  
ENGLISH  
Maintenance  
Using Your Camcorder Abroad  
Each country or region has its own electric and colour systems.  
Before using your camcorder abroad, check the following items.  
Power sources  
You can use your camcorder in any country or area with the supplied AC Power Adapter within 100V to 240V,  
50/60 Hz.  
Use a commercially available AC plug Adapter, if necessary, depending on the design of the local wall outlet.  
Colour system  
You can view your recording in the viewfinder.  
However, to view it on a television or copy it to a videocassette recorder, the television or VCR must be PAL-compatible  
and have the appropriate audio/video jacks.  
Otherwise, you may need to use a transcoder.  
PAL-compatible Countries/Regions  
Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland, France, Germany,  
Greece, Great Britain, Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait, Libya, Malaysia, Mauritius,  
Norway, Rumania, Saudi Arabia, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Syria, Thailand,  
Tunisia, etc.  
NTSC-compatible Countries/Regions  
Bahamas, Canada, Central America, Japan, Mexico, Philippines, Korea, Taiwan, United States of America, etc.  
Reference  
You can make recordings with your camcorder and view pictures on the LCD from anywhere in the world.  
91  
ENGLISH  
Troubleshooting  
Troubleshooting  
Before contacting a service centre, perform the following simple checks.  
They may save you the time and expense of an unnecessary call.  
Self Diagnosis Display  
Display Blinking  
slow  
Informs that...  
Action  
the battery pack is almost discharged. Change to a charged one.  
When the remaining time of the tape is .  
TAPE END! slow  
Prepare a new one.  
about 2 minutes  
TAPE END!  
TAPE!  
no  
Change to a new one.  
Insert a tape.  
the tape reached its end.  
there is no tape in camcorder.  
slow  
If you want to record, release  
the protection.  
slow  
PROTECTION!  
the tape is protected to record.  
slow the camcorder has some mechanical  
fault.  
1. Eject the tape.  
....  
D
L
C
R
2. Set to OFF.  
3. Detach the battery.  
4. Reattach the battery.  
* If unresolved contact your  
local service representative.  
moisture condensation has formed in  
the camcorder.  
slow  
see below.  
Moisture Condensation  
If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the  
camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum  
and be damaged or the unit may not operate correctly.  
To prevent possible damage under these circumstances, the camcorder is fitted with a moisture sensor.  
If there is moisture inside the camcorder,  
(DEW) is displayed. If this happens, none of the functions  
except cassette ejection will work.  
Open the cassette compartment and remove the battery.  
Leave the camcorder for at least two hours in a dry warm room.  
92  
ENGLISH  
Troubleshooting  
Self Diagnosis Display in M.REC/M.PLAY mode  
Display  
Blinking  
slow  
Informs that...  
Action  
Insert a card.  
There no card or memory in the  
camcorder.  
NO MEMORY!  
There is not enough memory to  
record.  
Change to a new card or erase  
recorded image.  
MEMORY IS FULL  
slow  
slow  
slow  
slow  
NO STORED  
IMAGE  
There is no images recorded on  
the SMC or memory.  
Record new images.  
CONFIRM WRITE  
PROTECTION  
The card or memory is protected  
to record.  
Remove the protection label.  
Cancel the protect of image.  
When you try to delete to  
protected image.  
CONFIRM  
PROTECTION  
Format a card or memory or  
insert card recorded on this  
camcorder.  
MEMORY READ  
ERROR  
slow The camera can not playback.  
slow The camera can not record.  
MEMORY WRITE  
ERROR  
Format a card or memory or  
change to a new card.  
The card or memory needs to  
format.  
NEED FORMAT  
FILE DELETE  
slow  
Format a card or memory.  
Wait until the end of deleting.  
Wait until the end of formatting.  
Wait until the end of copying.  
When progressing FILE  
DELETE.  
slow  
MEMORY  
FORMAT  
When progressing MEMORY  
FORMAT.  
slow  
FILE COPY  
slow When progressing FILE COPY.  
93  
ENGLISH  
Troubleshooting  
If these instructions do not allow you to solve the problem,  
contact your nearest authorized service centre.  
Symptom  
Explanation/Solution  
You cannot switch the  
camcorder on  
Check the battery pack or the AC Power Adapter.  
Check the POWER switch is set to CAM.  
You have reached the end of the cassette.  
Check the record protection tab on the cassette.  
START/STOP button  
does not operate while  
recording  
You have left the camcorder set to STBY for more than  
5 minutes without using it.  
The battery pack is fully exhausted.  
The camcorder goes off  
automatically.  
The atmospheric temperature is too low.  
The battery pack has not been charged fully.  
The battery pack is completely dead, and cannot be  
recharged, Use another battery pack.  
The battery pack is  
quickly exhausted.  
The video heads may be dirty.  
Clean the head with a cleaning tape.  
When you see a blue  
screen during playback  
The contrast between the subject and the background is  
too great for the camcorder to operate normally. Make the  
background bright to reduce the contrast or use the BLC  
function while you are recording brighter.  
A vertical strip appears  
on the screen when  
recording a dark  
background.  
The Viewfinder lens has not been adjusted.  
Adjust the viewfinder control lever until the indicators  
displayed on the viewfinder come into sharp focus.  
The image in the  
viewfinder is blurred.  
Auto focus does not  
work.  
Check the M.FOCUS menu.  
Auto focus does not work in the Manual Focus mode.  
Check the POWER switch. Set the power switch to VCR.  
You have reached the beginning or end of the cassette.  
Play, FF or REW button  
does not work.  
When you see the  
broken block image  
during the EDIT  
SEARCH.  
It is the characteristic of this camcorder and it is not a failure  
or defect.  
94  
ENGLISH  
Specifications  
Model name: VP-D130/D130i/D190/D190i  
System  
Video signal  
PAL, CCIR standards  
Video recording system 2 rotary heads, Helical scanning system  
Audio recording system Rotary heads, PCM system  
Usable cassette  
Tape speed  
Tape recording time  
FF/REW time  
Image device  
Lens  
Digital video tape (6.35mm width): Mini DV cassette  
SP: approx. 18.83mm/s LP: approx. 12.57mm/s  
SP: 60 minutes (when using DVM 60), LP: 90 minutes (when using DVM 60)  
Approx. 150 sec. (using DVM60 tape)  
CCD (Charge Coupled Device)  
F1.8 12x(Optical), 480x(Digital) Electronic zoom lens  
Ø37  
Filter diameter  
LCD monitor/Viewfinder  
Size/dot number  
LCD monitor Method  
Viewfinder  
2.5inch/200,000  
TFT LCD  
VP-D190/D190i : 0.44” colour LCD, VP-D130/D130i : 0.24” B/W LCD  
Connectors  
Video output  
S-video output  
Audio output  
DV input/output  
USB output  
1Vp-p (75terminated)  
Y: 1Vp-p, 75, C: 0. 286Vp-p, 75Ω  
-7.5dBs (600terminated)  
VP-D130i/D190i : 4pin special in/out connector, VP-D130/D190 : out only  
Mini-B type connector  
External mic  
Ø3.5 stereo  
General  
Power source  
Power source type  
Power consumption  
(Recording)  
DC 8.4V, Lithium Ion Battery Pack 7.4V  
Lithium Ion Battery Pack, Power supply (100V~240V) 50/60Hz  
4.9W(LCD), 3.6W(EVF)  
0˚~40˚C (32˚F~104˚F)  
-20˚C ~ 60˚C (-4˚F ~ 140˚F)  
Length 104mm, Height 114mm, Width 53.5mm  
VP-D130/D130i : 470g, VP-D190/D190i : 480g (Except for Lithium Ion Battery Pack and tape)  
Omni-directional stereo condenser microphone  
Indoors: greater than 15m (straight line), Outdoors: greater than 5m (straight line)  
Operating temperature  
Storage temperature  
External dimension  
Weight  
Built-in MIC  
Remote control  
95  
• These technical specifications and design may be changed without notice.  
ENGLISH  
INDEX  
- L -  
- A -  
Accessories ................................................................................ 12  
Audio dubbing ............................................................................. 62  
AUDIO MODE ............................................................................ 50  
LCD ....................................................................................... 28, 29  
- M -  
MF/AF ......................................................................................... 59  
- B -  
- O -  
Battery Pack ............................................................................... 22  
BEEP .......................................................................................... 37  
BLC ............................................................................................. 60  
OSD ...................................................................................... 17, 18  
- P -  
PHOTO SEARCH ....................................................................... 64  
PROGRAM AE ........................................................................... 40  
Protection .................................................................................... 86  
- C -  
Cassette ...................................................................................... 25  
Cleaning ...................................................................................... 90  
CLOCK SET ............................................................................... 35  
Connecting .................................................................................. 67  
CUSTOM Mode .......................................................................... 58  
CUSTOM.Q ................................................................................ 48  
- Q -  
Quick Menu ................................................................................. 54  
- R -  
REC MODE ................................................................................ 49  
REMOCON ................................................................................. 36  
Remote control ..................................................................... 16, 19  
- D -  
DATE/TIME ................................................................................. 52  
DC Cable .................................................................................... 21  
Deleting ....................................................................................... 87  
DEMONSTRATION .................................................................... 39  
DSE ............................................................................................. 46  
DV .........................................................................................71, 72  
- S -  
SHUTTER SPEED ..................................................................... 56  
SmartMediaCard .................................................................. 77, 81  
Sound ......................................................................................... 32  
Speaker ....................................................................................... 32  
Still images ........................................................................... 83, 84  
- E -  
EASY Mode ................................................................................ 57  
Edit Search ................................................................................. 27  
EIS ...............................................................................................45  
EXPOSURE ................................................................................ 56  
- T -  
TV DISPLAY ............................................................................... 53  
- U -  
- F -  
USB ............................................................................................. 73  
Fade ............................................................................................ 61  
Formatting ................................................................................... 88  
Frame advance ........................................................................... 69  
Functions Keys ........................................................................... 15  
- V -  
Viewfinder ............................................................................. 28, 30  
- W -  
WHT. BALANCE ......................................................................... 42  
WIND CUT .................................................................................. 51  
- Z -  
- H -  
Hand Strap ................................................................................. 20  
- I -  
ZERO MEMORY ........................................................................ 70  
Zoom .................................................................................... 43, 44  
IEEE1394 .................................................................................... 71  
Image quality .............................................................................. 80  
96  
ENGLISH  
Power Sources (United Kingdom Only)  
The mains lead on the power adapter is supplied with a moulded plug incorporating a fuse.  
The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to  
BS1362 of the same rating must be used.  
Never use the plug with the fuse cover omitted if the cover is detachable.  
If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.  
Replacement covers are available from your dealer.  
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point,  
you should obtain a suitable safety approved extension lead or consult your dealer for assistance.  
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug.  
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.  
IMPORTANT  
The wires in the mains lead are coloured in accordance with the following code:  
BLUE = NEUTRAL  
BROWN = LIVE  
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:  
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.  
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.  
WARNING  
NOTE  
Do not connect either wire to the earth terminal marked with the letter E or the earth symbol,  
or coloured GREEN or GREEN and YELLOW.  
,
This page is applicable to Great Britain only.  
97  
ENGLISH  
THIS CAMCORDER IS MANUFACTURED BY:  
ELECTRONICS  
*Samsung Electronics’ Internet Home Page  
AD68-00442E(AA-E7)  

Ultra Products Micro Fly X6 Series Cases BX6 User Manual
TRENDnet 1000BASE LX User Manual
Star Manufacturing CD2PG 3 User Manual
Sony Pole Mount Adaptor UNI CMA1 User Manual
Sony Handycam HDR FX7E User Manual
Sony DSX S310BTX User Manual
Slick VC125 User Manual
Silva Boating Equipment 70 User Manual
Sharp TCADH2556RCZZ User Manual
Sanyo Car Satellite TV System DP39843 User Manual