Samsung PL170 User Manual

This user manual includes detailed usage  
instructions for your camera. Please read  
this manual thoroughly.  
Ä Click a topic  
User Manual  
PL170/PL171  
Health and safety information  
Do not touch the flash while it fires.  
Caution—situations that could cause damage to your camera  
or other equipment  
The flash is very hot when fired and may burn your skin.  
When you use AC charger, turn off the camera before you  
disconnect the power to the AC charger.  
Remove the batteries from your camera when storing it for an  
extended period of time.  
Failing to do so may result in fire or electric shock.  
Installed batteries may leak or corrode over time and cause  
serious damage to your camera.  
Disconnect chargers from power sources when not in use.  
Failing to do so may result in fire or electric shock.  
Use only authentic, manufacturer-recommended, Lithium-ion  
replacement batteries. Do not damage or heat the battery.  
This may cause a fire or personal injuries.  
Do not use a damaged power supply cord, plug, or loose outlet  
when you charge batteries.  
This may cause a fire or electric shock.  
Use only Samsung-approved batteries, chargers, cables and  
accessories.  
Do not allow the AC charger to come in contact with the +/-  
terminals on the battery.  
Unauthorized batteries, chargers, cables or accessories can  
cause batteries to explode, damage your camera, or cause  
injury.  
This may cause a fire or electric shock.  
Samsung is not responsible for damages or injuries caused by  
unapproved batteries, chargers, cables or accessories.  
Do not force the camera’s parts or apply pressure to the  
camera.  
This may cause your camera to malfunction.  
Do not use batteries for unintended purposes.  
This may cause a fire or electric shock.  
2
Health and safety information  
Exercise caution when you connect cables or adapters and  
install batteries and memory cards.  
Check that the camera is operating properly before use.  
The manufacturer takes no responsibility for any loss of files or  
damages that may result from camera malfunction or improper  
use.  
If you force the connectors, improperly connect cables, or  
improperly install batteries and memory cards, you can damage  
ports, connectors, and accessories.  
You must plug the end of the cable with the indicator light (S)  
Keep cards with magnetic strips away from the camera case.  
into your camera.  
Information stored on the card may be damaged or erased.  
If the cable is reversed, it may damage your files. The  
manufacturer is not responsible for any loss of data.  
Never use a damaged charger, battery, or memory card.  
This may result in electric shock or camera malfunction or cause  
a fire.  
3
Outline of the User Manual  
Copyright information  
Microsoft Windows and the Windows logo are  
registered trademarks of the Microsoft Corporation.  
Mac is a registered trademark of the Apple Corporation.  
microSD™, microSDHC™ are registered trademarks of  
the SD Association.  
HDMI, the HDMI logo and the term "High Definition  
Multimedia Interface" are trademarks or registered  
trademarks of HDMI Licensing LLC.  
Trademarks and trade names used in this manual are  
the property of their respective owners.  
Camera specifications or contents of this manual may  
be changed without prior notice due to upgrade of  
camera functions.  
You are not allowed to reuse or distribute any part of  
this manual without prior permission.  
For Open Source License information, refer to the  
‘OpenSourceInfo.pdf’ in the provided CD-ROM.  
4
Indicators used in this manual  
Icons used in this manual  
Shooting mode Indicator  
Icon  
Function  
Smart Auto  
Auto  
S
Additional information  
a
p
d
b
Safety warnings and precautions  
Program  
DUAL IS  
Beauty Shot  
Night  
Camera buttons. For example, [Shutter] represents  
the shutter button.  
[ ]  
( )  
Page number of related information  
N
The order of options or menus you must select to  
perform a step; for example: Select Shooting “  
Photo Size (represents Select Shooting, and then  
select Photo Size).  
Scene  
s
v
Movie  
*
Annotation  
Shooting mode icons  
These icons indicate that a function is available in the  
corresponding modes. The smode may not support functions  
for all scenes.  
Abbreviations used in this manual  
For example:  
Abbreviation  
ACB  
AEB  
AF  
Definition  
Auto Contrast Balance  
Auto Exposure Bracket  
Auto Focus  
Available in  
Program, DUAL IS,  
and Movie modes  
DIS  
Digital Image Stabilization  
Digital Print Order Format  
Exposure Value  
DPOF  
EV  
ISO  
International Organization for Standardization  
Optical Image Stabilization  
White Balance  
OIS  
WB  
5
Expressions used in this manual  
Pressing the shutter  
Exposure (Brightness)  
Half-press [Shutter]: press the shutter halfway down  
Press [Shutter]: press the shutter all the way down  
The amount of light that enters your camera determines the  
exposure. You can alter the exposure with shutter speed,  
aperture value, and ISO sensitivity. By altering the exposure, your  
photos will be darker or lighter.  
Normal exposure  
Overexposure (too bright)  
Half-press [Shutter]  
Press [Shutter]  
Subject, background, and composition  
Subject: the main object in a scene, such as a person, animal,  
or still life  
Background: the objects around the subject  
Composition: the combination of a subject and background  
Background  
Composition  
Subject  
6
Basic troubleshooting  
Learn to solve common problems by setting shooting options.  
The subject’s eyes  
appear red.  
This is caused by a reflection from the camera flash.  
Set the flash option to  
Red-eye or  
Red-eye Fix. (p. 50)  
If the photo has already been captured, select  
Photos have dust  
spots.  
If dust particles are present in the air, you may capture them in photos when you use the flash.  
Turn off the flash or avoid capturing photos in a dusty place.  
Photos are blurred.  
This may be caused if you capture photos in low light conditions or hold the camera incorrectly.  
Use the OIS function or half-press [Shutter] to ensure the subject is focused. (p. 29)  
d
Photos are blurred  
when shooting at  
night.  
As the camera tries to let in more light, the shutter speed slows. This can make it difficult to steady the  
camera and may result in camera shake.  
Rotate the mode dial to  
Use a tripod to prevent your camera from shaking.  
Subjects come out  
When the light source is behind the subject or when there is a high contrast between the light and dark  
too dark because of areas, the subject may appear too dark.  
backlighting.  
Avoid shooting toward the sun.  
Select Backlight in mode. (p. 33)  
s
Set the flash option to Fill in. (p. 50)  
Set the Auto Contrast Balance (ACB) option. (p. 60)  
Set the metering option to  
7
 
Quick reference  
Capturing photos of people  
Capturing photos of text, insects, or  
flowers  
Viewing files by category in  
Smart Album 71  
Viewing files as thumbnails  
f
f
b mode  
smode > Text  
f
f
Self-Shot  
Macro  
f
f
Children  
Deleting files on the memory  
card 73  
f
f
Red-eye/Red-eye Fix (to prevent or correct red-eye)  
Applying effects to photos  
Viewing files as a slide show  
f
f
Face Detection  
f
smode > Magic Frame  
f
Viewing files on a TV or HDTV  
smode > Object Highlight  
f
f
Capturing photos at night or in the  
dark  
Smart Filter effects  
f
Connecting your camera to a  
computer 86  
Image Adjust (to adjust Contrast, Sharpness, or  
Saturation) 67  
f
smode > Dawn, Sunset  
f
f
Adjusting sound and volume  
Nmode  
f
f
Flash options  
f
Reducing camera shake  
Adjusting the brightness of  
the display 96  
ISO sensitivity (to adjust the sensitivity to light)  
f
f
Optical Image Stabilization (OIS)  
Changing the display  
language 97  
f
f
Capturing action photos  
dmode  
f
Setting the date and time  
f
Continuous, Motion Capture  
f
Before contacting a service  
center 110  
f
Adjusting the exposure (brightness)  
ISO sensitivity (to adjust the sensitivity to light)  
f
EV (to adjust exposure)  
f
ACB (to compensate for subjects against bright  
backgrounds) 60  
f
Metering  
f
AEB (to capture 3 photos of the same scene with  
different exposures) 63  
f
8
 
Contents  
9
 
Contents  
10  
Contents  
11  
Unpacking  
The following items are included in your product box.  
Optional accessories  
Camera  
AC adapter/  
USB cable  
Camera case  
HDMI cable  
A/V cable  
Rechargeable battery  
User Manual CD-ROM  
Strap  
Battery charger  
Memory card/  
Memory card adapter  
Quick Start Manual  
The illustrations may differ slightly from the items shipped with your product.  
Basic functions 13  
 
Camera layout  
Before you start, familiarize yourself with your camera’s parts and their functions.  
POWER button  
Front LCD button  
Microphone  
Shutter button  
Speaker  
Flash  
AF-assist light/Timer lamp  
Front display  
Lens  
USB and A/V port  
Accepts USB cable and A/V cable  
Tripod mount  
HDMI port  
Accepts HDMI cable  
Battery chamber cover  
Insert a memory card and battery  
Basic functions 14  
 
Camera layout  
Zoom button  
In Shooting mode: Zoom in or out  
In Playback mode: Zoom in on part of a  
photo or view files as thumbnails, or adjust  
volume  
Status lamp  
Blinking: When the camera is saving  
a photo or video, being read by a  
computer or printer, or out of focus  
Steady: When the camera is  
Attaching the strap  
x
connecting to a computer or in focus  
y
Main display  
Mode dial  
Icon  
Description  
Button  
Description  
Smart Auto: Capture a photo by letting the camera automatically  
detect and select a scene mode.  
Access options or menus.  
S
Auto: Capture a photo quickly and easily with minimal settings  
a
p
Basic functions  
Other functions  
Move up  
Change the display option.  
D
c
F
Program: Capture a photo by setting options.  
Change the macro option.  
Change the flash option.  
Change the timer option.  
Move down  
Move left  
DUAL IS: Take a photo with options suitable for reducing camera  
shake  
d
b
Move right  
Beauty Shot: Capture a photo of a person with options to hide  
facial imperfections  
t
Confirm the highlighted option or menu.  
Enter Playback mode.  
Night: Capture a photo with options for shooting at night  
Scene: Capture a photo with options preset for a specific scene.  
Movie: Record a video.  
N
s
v
Access options in Shooting mode.  
Delete files in Playback mode.  
Basic functions 15  
 
Inserting the battery and memory card  
Learn how to insert the battery and an optional memory card into the camera.  
Removing the battery and memory card  
Push the card gently until  
it disengages from the  
camera, and then pull it out  
of the slot.  
Memory card  
Insert a memory card  
with the gold-colored  
contacts facing up.  
Battery lock  
Slide the lock up to release  
the battery.  
Memory card  
Insert the battery with  
the Samsung logo facing  
up.  
Rechargeable battery  
You can use the internal memory for temporary storage if a memory card is  
not inserted.  
Rechargeable battery  
Basic functions 16  
 
Charging the battery and turning on your camera  
Charging the battery  
Before you use the camera for the first time, you must charge the  
battery. Attach the USB cable to the AC adapter, and then plug  
the end of cable with the indicator light into your camera.  
Turning on your camera  
Press [POWER] to turn your camera on or off.  
The initial setup screen appears when you turn on the camera  
for the first time. (p. 18)  
Turning on your camera in Playback mode  
Press [P]. The camera turns on and immediately accesses  
Playback mode.  
Indicator light  
Red: Charging  
Green: Fully charged  
If you turn on your camera by pressing and holding [P] for about 5 seconds,  
the camera does not emit any sounds.  
Basic functions 17  
 
Performing the initial setup  
When the initial setup screen appears, follow the steps below to configure the camera’s basic settings.  
Press [  
t
] to select Language, and then press [  
t
] or  
Press [F] or [t] to select a time zone, and then press  
1
4
[
o].  
[o].  
To set the daylight-saving time, press [D].  
Time Zone  
London  
DST  
Back  
Press [  
D
] or [  
c
] to select a language, and then  
2
3
Press [  
D
] or [o].  
] or [  
c
] to select Date/Time Set, and then  
press [o  
].  
5
6
press [t  
Press [D  
] or [  
] or [  
c
o
] to select Time Zone, and then  
press [t  
].  
English  
London  
Time Zone  
Date/Time Set  
Date Type  
YYYY MM DD  
Back  
Set  
Press [F] or [t] to select an item.  
Basic functions 18  
 
Performing the initial setup  
Press [  
D
] or [  
c
] to set the date and time, and then  
7
8
press [o  
].  
Press [D  
] or [  
c
] to select Date Type, and then press  
[t] or [o].  
English  
London  
Time Zone  
Date/Time Set  
Date Type  
YYYY/MM/DD  
MM/DD/YYYY  
DD/MM/YYYY  
Off  
Back  
Set  
Press [  
D] or [c] to set a date format, and then press  
9
[o].  
Press [m] to switch to the Shooting mode.  
10  
Basic functions 19  
Learning icons  
The icons the camera displays on the screen change according to the mode you select or the options you set.  
Icon  
Description  
Icon  
Description  
1
2
Auto focus frame  
Face detection  
Camera shake  
Zoom indicator  
Zoom ratio  
Microphone muted  
3
Option Icons (on the left)  
Current date and time  
Icon  
Description  
Photo resolution when Intelli  
zoom is on  
Aperture and shutter speed  
3
Long time shutter  
Exposure value adjusted  
White balance  
Face tone  
1
Status icons  
2
Option Icons (on the right)  
Icon  
Description  
Icon  
Description  
Shooting mode  
Photo resolution  
Video resolution  
Photo quality  
Available number of photos  
Available recording time  
Face retouch  
ISO sensitivity  
Smart filter  
Memory card not inserted  
(Internal memory)  
Frame rate  
Metering  
Flash  
Image adjustment (contrast,  
sharpness, and saturation)  
Memory card inserted  
: Fully charged  
: Partially charged  
: Empty (Recharge)  
Burst type  
Optical Image Stabilization (OIS)  
Timer  
Voice memo  
Auto focus option  
Basic functions 20  
 
Selecting options or menus  
You can select options by pressing [m], and then pressing [D], [c], [F], or [t]. Press [o] to confirm.  
You can also access shooting options by pressing [f], but some options may not be available.  
Going back to the previous menu  
In Shooting mode, press [  
m].  
1
2
Press [m] again to go back to the previous menu.  
Select an option or menu.  
To move up or down, press [  
To move left or right, press [  
D
] or [  
c].  
].  
Half-press [Shutter] to return to the Shooting mode.  
F
] or [t  
Press [o] to confirm the highlighted option or menu.  
3
Basic functions 21  
 
Selecting options or menus  
For example, selecting a White Balance option in Program mode  
Press [  
D
] or [o].  
] or [c] to select White Balance, and then  
4
press [t  
Rotate the mode dial to  
p.  
1
2
Photo Size  
Quality  
EV  
ISO  
White Balance  
Smart Filter  
Face Detection  
Back  
Press [m].  
Exit  
Photo Size  
Quality  
Shooting  
Sound  
Press [  
F
] or [t  
] to select a White Balance option.  
5
6
EV  
Front Display Settings  
Display  
ISO  
White Balance  
Smart Filter  
Settings  
Exit  
Daylight  
Face Detection  
Change  
Press [D  
] or [  
].  
c
] to select Shooting, and then press  
3
Move  
Back  
[
t] or [o  
Press [o].  
Basic functions 22  
Setting the display and sound  
Learn how to change the basic display information and the sound settings.  
Setting the display type  
You can select a display type for the Shooting or Playback mode.  
Setting the sound  
Set the sound your camera emits when you perform functions.  
In Shooting or Playback mode, press [  
Select Sound Beep Sound.  
Select an option.  
m].  
Press [  
D
] repeatedly to change the display type.  
1
2
3
Option  
Off  
Description  
Show all photographic  
information.  
The camera does not emit any sounds.  
The camera emits sounds.  
1/2/3  
Mode  
Description  
Hide information about shooting, except for  
basic information, such as the available number  
of photos, the available recording time, and the  
battery icon.  
Shooting  
Display all information about shooting.  
Hide all information about the current file.  
Display information about the current file, except  
for the file information.  
Playback  
Display all information about the current file.  
Basic functions 23  
 
Capturing photos  
Learn how to capture photos easily and quickly in Auto mode.  
Rotate the mode dial to  
a
.
Half-press [Shutter] to focus.  
1
3
A green frame means the subject is in focus.  
A red frame means the subject is out of focus.  
Align your subject in the frame.  
2
Press [Shutter] to capture a photo.  
4
See page 29 for tips to get clearer photos.  
Basic functions 24  
 
Capturing photos  
Icon  
Turning on the front display  
Description  
The front display helps you capture self-portraits, or photos of  
children, or photos of people jumping. If you use the Children  
mode, you can play a short animation on the front display to  
attract a child’s attention. (p. 43)  
Front On: Turn on the front display.  
Self-Shot: View yourself on the front display while you  
capture a self-portrait. (p. 42)  
Children: Show a short animation on the front display  
to attract the attention of children. (p. 43)  
In Shooting mode, press the front LCD button.  
1
Jump Shot: Show a visual cue on the front display,  
so subjects can time their jumps for the photo. (p. 43)  
When you set timer options, the front display will remain active. (p. 49)  
When you use the camera in brightly lit or sunny areas, you may not  
be able to see the front display clearly.  
When you play slide shows or movies, the front display may not  
activate even if you press the front LCD button.  
Self-Shot is automatically selected if you do not select an option  
within 3 seconds.  
You can set the camera to automatically release the shutter when it  
detects a smiling face in Self Shot or Children mode. (p. 95)  
Select a shooting option.  
2
Self-Shot  
Basic functions 25  
 
Capturing photos  
Digital zoom  
aps  
Zooming  
If the zoom indicator is in the digital range, your camera is using  
the Digital zoom. By using both the Optical zoom and Digital  
zoom, you can zoom in up to 25 times.  
You can capture close-up photos by adjusting the zoom. Your  
camera has a 5X Optical zoom, 2X Intelli zoom, and 5X Digital  
zoom. The Intelli zoom and Digital zoom cannot be used at the  
same time.  
Optical range  
Zoom indicator  
Digital range  
The Digital zoom is not available with the Smart Filter effect or Tracking  
AF option.  
If you capture a photo with the Digital zoom, the photo quality may  
deteriorate.  
Zoom ratio  
Zoom in  
Zoom out  
The available zoom ratio for videos differs from photo zoom ratio.  
Basic functions 26  
 
Capturing photos  
Intelli zoom  
Setting Intelli zoom  
Saps  
If the zoom indicator is in the Intelli range, your camera is using  
the Intelli zoom. Photo resolution varies according to the zoom  
rate if you use the Intelli zoom. By using both the Optical zoom  
and Intelli zoom, you can zoom in up to 10 times.  
In Shooting mode, press [  
m].  
1
Select Shooting Intelli Zoom.  
2
3
Select an option.  
Photo resolution when  
the Intelli zoom is on  
Icon  
Description  
Off: The Intelli zoom is deactivated.  
Optical range  
On: The Intelli zoom is activated.  
Zoom indicator  
Intelli range  
The Intelli zoom is not available with the Smart Filter effect or Tracking  
AF option.  
The Intelli zoom is available only when you set a 4:3 resolution ratio. If  
you set another resolution ratio with Intelli zoom on, the Intelli zoom will  
be turned off automatically.  
The Intelli zoom helps you capture a photo with less quality  
deterioration than the Digital zoom. However, the photo quality may be  
lower than when you use the Optical zoom.  
Basic functions 27  
 
Capturing photos  
apbNsv  
Reducing camera shake (OIS)  
OIS may not function properly when:  
-
-
-
-
you move your camera to follow a moving subject  
you use the Digital zoom  
there is too much camera shake  
the shutter speed is slow (for example, when you capture night  
scenes)  
Reduce camera shake optically in Shooting mode.  
-
-
the battery is low  
you capture a close-up shot  
If you use the OIS function with a tripod, your images may be blurred  
by the vibration of the OIS sensor. Deactivate the OIS function when  
you use a tripod.  
If the camera is hit or dropped, the display will be blurry. If this occurs,  
turn off the camera, and then turn it on again.  
Before correction  
After correction  
In Shooting mode, press [  
m].  
1
2
3
Select Shooting or Movie OIS.  
Select an option.  
Icon  
Description  
Off: OIS is deactivated.  
On: OIS is activated.  
Basic functions 28  
   
Tips for getting a clearer photo  
Holding your camera correctly  
Reducing camera shake  
Ensure nothing is  
blocking the lens.  
Set the Optical Image Stabilization option to  
reduce camera shake. (p. 28)  
Select the mode to reduce camera shake  
both optically and digitally. (p. 38)  
d
When  
is displayed  
Half-pressing the shutter button  
Half-press [Shutter] and adjust the  
focus. The camera adjusts the focus and  
exposure automatically.  
Camera shake  
When you shoot in the dark, avoid setting the flash option to Slow  
Sync or Off. The aperture remains open longer and it may be harder to  
hold the camera still.  
The camera sets the aperture value  
and shutter speed automatically.  
Focus frame  
Use a tripod or set the flash option to Fill in. (p. 50)  
Press [Shutter] to capture the photo  
if the focus frame appears in green.  
Change the composition and half-  
press [Shutter] again if the focus  
frame appears in red.  
Set ISO sensitivity options. (p. 51)  
Basic functions 29  
   
Preventing your subject from being out of focus  
When you capture photos in low light  
Turn on the flash.  
It may be difficult to get your subject in focus when:  
-
there is little contrast between the subject and background (for  
example, when your subject is wearing clothing that is similar in color  
to the background)  
(p. 50)  
-
-
-
-
the light source behind the subject is too bright  
the subject is shiny or reflective  
the subject includes horizontal patterns, such as blinds  
the subject is not positioned in the center of the frame  
When subjects are moving rapidly  
Use the Continuous  
or Motion Capture  
function. (p. 63)  
Use the focus lock  
Half-press [Shutter] to focus. When the subject is in focus,  
you can reposition the frame to change the composition.  
When you are ready, press [Shutter] to capture your photo.  
Basic functions 30  
Shooting modes  
Capture photos or record videos by selecting the best shooting mode for the conditions.  
Icon  
Description  
Using the Smart Auto mode  
In Smart Auto mode, your camera automatically chooses the  
appropriate camera settings based on the type of scene it  
detects. The Smart Auto mode is helpful if you are not familiar  
with the camera settings for various scenes.  
Portraits at night  
Landscapes with backlighting  
Portraits with backlighting  
Portraits  
Rotate the mode dial to  
S.  
1
2
Close-up photos of objects  
Close-up photos of text  
Sunsets  
Align your subject in the frame.  
The camera automatically selects a scene. An appropriate  
scene icon will appear at the top left of the screen. The icons  
are listed below.  
Clear skies  
Forested areas  
Close-up photos of colorful subjects  
Camera is stabilized or on a tripod (when shooting in  
the dark)  
Actively moving subjects  
Fireworks (when using a tripod)  
Icon  
Description  
Landscapes  
Scenes with bright white backgrounds  
Landscapes at night (when the flash is off)  
Extended functions 32  
 
Shooting modes  
Half-press [Shutter] to focus.  
Using the Scene mode  
3
4
In several scenes, the camera automatically captures a photo  
In Scene mode, you can capture a photo with options that are  
preset for a specific scene.  
when you half-press [Shutter].  
Press [Shutter] to capture the photo.  
Rotate the mode dial to  
Select a scene.  
s.  
1
2
If the camera does not recognize an appropriate scene mode, it uses  
the default settings for the mode.  
S
Even if it detects a face, the camera may not select a portrait mode  
depending on the subject's position or lighting.  
The camera may not select the correct scene depending on the  
shooting conditions, such as camera shake, lighting, or distance to  
the subject.  
Object Highlight  
Even if you use a tripod, the camera may not detect the  
subject is moving.  
mode if the  
In  
S
mode, the camera consumes more battery power, because it  
changes settings often to select appropriate scenes.  
To change a scene mode, press [m], and then select  
Scene. You can select any scene you want.  
For the Magic Frame mode, see “Using the Magic Frame  
mode” on page 34.  
For the Object Highlight mode, see "Using the Object  
Highlight mode" on page 34.  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
3
4
Press [Shutter] to capture the photo.  
Extended functions 33  
   
Shooting modes  
Using the Magic Frame mode  
In Magic Frame mode, you can apply various frame effects to  
your photos. The shape and the feel of the photos will change  
according to the frame you select.  
Using the Object Highlight mode  
The Object Highlight mode makes the subject more discernible  
by adjusting the depth of field.  
Rotate the mode dial to  
s.  
1
2
3
Rotate the mode dial to  
s.  
1
2
3
4
5
Select Object Highlight.  
Select Magic Frame.  
Position the camera according to the optimum distance  
displayed on the screen.  
Press [m].  
Select Shooting Frame.  
The optimum distance will vary, based on the zoom ratio you  
use.  
Select an option.  
Old Film  
Back  
Move  
Press [  
m
].  
4
5
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
6
7
Select Shooting Object Highlight Effect.  
Press [Shutter] to capture the photo.  
In Magic Frame mode, the resolution is automatically set to  
.
Extended functions 34  
     
Shooting modes  
Select an option to adjust Blur or Tone.  
6
Available resolutions in Object Highlight mode are  
and  
.
Blur: The higher the value, the more intense the blur effect in  
the photo.  
If the shooting distance is not within the optimum range, you can  
capture a photo but the Object Highlight effect will not be applied.  
The Object Highlight effect cannot be used in dark places.  
The Object Highlight effect cannot be used with the Optical zoom at  
3X or higher.  
Tone: The higher the value, the brighter the photo.  
Blur  
Tone  
Blur  
Digital zoom is not available in Object Highlight mode.  
Use a tripod to prevent camera shake as the camera captures 2  
consecutive photos to apply the effect.  
The subject and the background should have a significant contrast  
in color.  
Subjects should be positioned far away from the background for the  
greatest effect.  
Back  
Move  
Press [  
o
] to save.  
7
8
Half-press [Shutter] to focus.  
When the camera can apply the object highlight effect,  
will appear.  
When the camera cannot apply the object highlight effect,  
will appear. If this occurs, adjust the distance from the camera  
to the subject.  
Press [Shutter] to capture a photo.  
9
Extended functions 35  
Shooting modes  
Select an option.  
Using the Beauty Shot mode  
In Beauty Shot mode, you can capture a portrait with options to  
hide facial imperfections.  
7
For example, increase the Face Retouch setting to hide more  
imperfections.  
Rotate the mode dial to  
b.  
1
2
3
4
Level 2  
Press [m].  
Select Shooting Face Tone.  
Select an option.  
For example, increase the face tone setting to make skin  
appear lighter.  
Back  
Move  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
8
9
Level 2  
Press [Shutter] to capture the photo.  
When using the Beauty Shot mode, the focus distance will be set to Auto  
Macro.  
Back  
Move  
Press [  
m
].  
5
6
Select Shooting Face Retouch.  
Extended functions 36  
   
Shooting modes  
Select an option.  
Using the Night mode  
In Night mode, you can use a slow shutter speed to extend  
the time until the shutter closes. Increase the aperture value to  
prevent overexposure.  
5
If you select AUTO, the aperture value or shutter speed will be  
adjusted automatically.  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
6
7
Rotate the mode dial to  
N.  
1
2
3
4
Press [Shutter] to capture the photo.  
Press [m].  
Select Shooting Long Time Shutter.  
Select the aperture value or shutter speed.  
Aperture value  
Use a tripod to prevent blurry photos.  
Shutter speed  
Aperture  
Move  
Back  
Extended functions 37  
   
Shooting modes  
Using the DUAL IS mode  
Reduce camera shake and prevent blurred photos with Optical  
and Digital Image Stabilization functions.  
Using the Program mode  
In Program mode, you can set most options, except the shutter  
speed and aperture value, which the camera sets automatically.  
Rotate the mode dial to  
Set desired options.  
p.  
1
2
(For a list of options, refer to page 46.)  
Before correction  
After correction  
Rotate the mode dial to  
d.  
1
2
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Press [Shutter] to take the photo.  
3
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
3
4
The Digital zoom and Intelli-zoom are not available in  
The camera will optically correct photos only when the light source is  
brighter than fluorescent light.  
If your subject is moving rapidly, the photo may be blurry.  
Set the Optical Image Stabilization option to reduce camera shake in  
different shooting modes. (p. 28)  
d
mode.  
Press [Shutter] to capture the photo.  
Extended functions 38  
   
Shooting modes  
Press [  
m].  
Using the Movie mode  
In Movie mode, you can record high-definition videos of up to 20  
minutes in length. The camera saves recorded videos as MP4  
(H.264) files.  
5
6
7
Select Movie Sound Alive.  
Select an option.  
Icon  
Description  
H.264 (MPEG-4 part10/AVC) is a high-compression video format  
established by the international standard organizations ISO-IEC and  
ITU-T.  
Sound Alive On: Turn on the Sound Alive function.  
Some memory cards may not support high definition recording. In this  
case, set a lower resolution.  
Memory cards with slow writing speeds will not support high-resolution  
videos and high-speed videos. To record high-resolution or high-speed  
videos, use memory cards with faster writing speeds.  
Sound Alive Off: Turn off the Sound Alive function.  
Mute: Do not record sounds.  
Do not block the microphone when you use the Sound Alive  
function.  
Recordings made with Sound Alive may differ from actual sounds.  
Rotate the mode dial to  
v.  
1
2
3
4
Press [m].  
Set desired options. (For a list of options, refer to page 46.)  
Press [Shutter] to start recording.  
8
9
10  
Select Movie Frame Rate.  
Select a frame rate (the number of frames per second).  
Press [Shutter] again to stop recording.  
As the frame rate increases, action appears more natural, but  
the file size also increases.  
Depending on the resolution and frame rate, the movie may appear  
smaller than the original size shown on the main display.  
Extended functions 39  
 
Shooting modes  
Pause recording  
Using the Smart Scene Detection mode  
In Smart Scene Detection mode, your camera automatically chooses  
the appropriate camera settings based on the scene it has detected.  
The camera allows you to temporarily pause a video while  
recording. With this function, you can record separate scenes as  
a single video.  
Rotate the mode dial to  
v
.
1
2
3
4
In Shooting mode, press [  
m].  
Select Movie Smart Scene Detection On.  
Align your subject in the frame.  
The camera automatically selects a scene. An appropriate  
scene icon will appear at the top left of the screen. The icons  
are listed below.  
Stop  
Record  
Press [o] to pause while recording.  
Press [o] to resume.  
Icon  
Description  
Landscapes  
Sunsets  
Clear skies  
Forested areas  
Extended functions 40  
 
Shooting modes  
Press [Shutter] to start recording.  
5
6
Press [Shutter] again to stop recording.  
If the camera does not recognize an appropriate scene mode, it uses  
the default settings for the Smart Scene Detection mode.  
The camera may not select the correct scene depending on the  
shooting conditions, such as camera shake, lighting, and distance to  
the subject.  
In Smart Scene Detection mode, you cannot set smart filter effects.  
Extended functions 41  
Capturing photos with the front display  
The front display helps you capture self-portraits or photos of children. You can also use the Jump Shot Timer with the front display.  
Capturing an Easy Self Shot  
Using the Self-portrait mode  
SapdbNs  
If you press the front LCD button when the power is off, the front  
display turns on for an Easy Self Shot. Because the main display  
is off, the camera consumes less battery power and you can  
Conveniently capture photos of yourself with the front display.  
prevent others from viewing the main display.  
The camera will turn off when you press the front LCD button  
again or press [POWER].  
The front display will turn off and the main display will turn on  
In Shooting mode, press the front LCD button.  
1
Select Self-Shot.  
2
Your camera will automatically detect your face and display a  
frame to indicate the detected face.  
when you press [o].  
Half-press [Shutter] to focus.  
3
4
Press [Shutter] to capture the photo.  
Extended functions 42  
   
Capturing photos with the front display  
SapdbNs  
SpdbNs  
Using the Children mode  
Using the Jump Shot Timer  
The Children mode attracts children by showing a short animation  
on the front display.  
Capture a photo of people jumping. An icon will appear on the  
front display to tell your subjects when to jump.  
In Shooting mode, press the front LCD button.  
1
Select Children.  
2
The camera will display an animation.  
In Shooting mode, press the front LCD button.  
1
Select Jump Shot.  
2
Press [Shutter].  
3
The front display will start a countdown a few seconds before  
shooting.  
Half-press [Shutter] to focus.  
3
4
Press [Shutter] to capture the photo.  
You can download animations from the Samsung website or transfer  
information.  
You can use Intelli-studio to edit videos you have captured and then  
play them on the front display. (p. 88)  
You can add sounds to animations to draw children's attention. (p. 95)  
Extended functions 43  
   
Capturing photos with the front display  
Jump when the jump icon appears on the front display.  
v
4
Recording a video with the front display  
The camera will capture 3 photos in succession.  
Recording a video in Self-portrait mode  
In Shooting mode, press the front LCD button.  
1
Select Front On.  
2
Press [Shutter] to start recording.  
3
Press [Shutter] again to stop recording.  
4
If you are capturing photos using the jump shot timer in low light conditions or  
indoors, photos may appear dark.  
Recording a video in Children mode  
In Shooting mode, press the front LCD button.  
1
Select Children.  
2
Press [Shutter] to start recording.  
3
Press [Shutter] again to stop recording.  
4
Extended functions 44  
 
apdbNs  
Recording voice memos  
Learn how to record a voice memo that you can play back later. You can also add a voice memo to a photo to remind you of shooting  
conditions.  
You will get the best sound quality when you speak 16 in (40 cm) away from the camera.  
Recording a voice memo  
Adding a voice memo to a photo  
In Shooting mode, press [  
m
].  
In Shooting mode, press [m].  
1
2
3
1
2
3
Select Shooting Voice Record.  
Select Shooting Voice Memo.  
Press [Shutter].  
Align your subject in the frame, and then capture a  
photo.  
Press [o] to pause or press [o] to resume.  
Each memo can be up to 10 hours long if memory is available.  
The camera begins to record a voice memo right after you  
capture the photo.  
Record a short voice memo (10 seconds maximum).  
4
Press [Shutter] to stop recording a voice memo before the  
10 seconds are up.  
You cannot add voice memos to photos in the burst mode.  
Stop  
Pause  
Press [Shutter] again to stop recording.  
4
5
Press [Shutter] again to record a new voice memo.  
Press [ ] to return to the Shooting mode.  
m
Extended functions 45  
 
Shooting options  
Learn how to set the options in Shooting mode.  
 
Selecting a resolution and quality  
Learn how to change the image resolution and quality settings.  
Selecting a resolution  
Icon  
Description  
As you increase the resolution, your photo or video will include  
more pixels, so it can be printed on larger paper or displayed on  
a larger screen. When you use a high resolution, the file size will  
also increase.  
1984 X 1488: Print on A5 paper.  
1920 X 1080: Print on A5 paper in panorama ratio (16:9)  
or play back on an HDTV.  
1024 X 768: Attach to an email.  
Setting a photo resolution  
SapdbNs  
In Shooting mode, press [m].  
1
Setting a video resolution  
v
Select Shooting Photo Size.  
2
3
In Shooting mode, press [  
m].  
1
Select an option.  
Select Movie Movie Size.  
2
3
Icon  
Description  
4608 X 3456: Print on A1 paper.  
Select an option.  
4608 X 3072: Print on A1 paper in wide ratio (3:2).  
Icon  
Description  
1280 X 720 HQ: Play back high-quality files on an HDTV.  
4608 X 2592: Print on A2 paper in panorama ratio (16:9)  
or play back on an HDTV.  
1280 X 720: Play back on an HDTV.  
640 X 480: Play back on an analog TV.  
320 X 240: Post on a web page.  
3648 X 2736: Print on A3 paper.  
2592 X 1944: Print on A4 paper.  
Shooting options 47  
 
Selecting a resolution and quality  
apdbNs  
Selecting a photo quality  
The camera compresses and saves the photos you capture in  
the JPEG format. Higher image quality settings will result in larger  
file sizes.  
In Shooting mode, press [  
m].  
1
2
3
Select Shooting Quality.  
Select an option.  
Icon  
Description  
Super Fine: Capture photos in super high quality.  
Fine: Capture photos in high quality.  
Normal: Capture photos in normal quality.  
Shooting options 48  
 
SapdbNsv  
Using the timer  
Learn how to set the timer to delay shooting.  
In Shooting mode, press [  
t].  
Press [Shutter] to start the timer.  
1
3
The AF-assist light/timer lamp blinks. The camera will  
automatically capture a photo at the specified time.  
The front display will start a countdown a few seconds before  
shooting.  
Off  
Select an option.  
2
Icon  
Description  
Off: The timer is not active.  
10 Sec: Capture a photo after a 10-second delay.  
2 Sec: Capture a photo after a 2-second delay.  
Press [Shutter] or [t] to cancel the timer.  
Depending on the Face Detection option you have selected, the timer  
function or some of its options may not be available.  
Double: Capture one photo after a 10-second delay  
and another photo after a 2-second delay.  
Available options may differ depending on the shooting conditions.  
Self timer options are not available if you set burst options.  
Shooting options 49  
 
Shooting in the dark  
Learn how to capture photos at night or in low light conditions.  
apbN  
SapbNs  
Preventing red-eye  
Using the flash  
If the flash fires when you capture a photo of a person in the dark,  
a red glow may appear in the person’s eyes. To prevent this,  
select Red-eye or Red-eye Fix. Refer to flash options in “Using  
the flash.”  
Use the flash when you capture photos in the dark or when you  
need more light on your photos.  
In Shooting mode, press [F].  
1
Auto  
Select an option.  
2
Icon  
Description  
Off:  
The flash will not fire.  
The camera will display the shake warning  
you are shooting in low light.  
when  
Red-eye Fix:  
The flash fires when the subject or background is  
dark, and the camera corrects red-eyes through its  
advanced software analysis.  
There is an interval between 2 bursts of the flash. Do  
not move until the flash fires a second time.  
Shooting options 50  
       
Shooting in the dark  
Icon  
Description  
Slow Sync:  
Flash options are not available if you set burst options or select Blink  
Detection.  
Make sure that your subjects are within the recommended distance  
from the flash. (p. 114)  
If light from the flash is reflected or there is a substantial amount of  
dust in the air, tiny spots may appear in your photo.  
The flash fires and the shutter stays open longer.  
This option is recommended when you want to  
capture ambient light to reveal more details in the  
background.  
Use a tripod to prevent your photos from blurring.  
The camera will display the shake warning  
you are shooting in low light.  
when  
Fill in:  
p
Adjusting the ISO sensitivity  
The flash always fires.  
The ISO sensitivity is the measure of a film’s sensitivity to light as  
defined by the International Organization for Standardization (ISO).  
The higher ISO sensitivity you select, the more sensitive to light  
your camera becomes. With a higher ISO sensitivity, you can get  
a better photo without using the flash.  
The camera automatically adjusts light intensity.  
Red-eye:  
The flash will fire twice when the subject or  
background is dark to reduce the red-eye effect.  
There is an interval between 2 bursts of the flash. Do  
not move until the flash fires a second time.  
In Shooting mode, press [  
Select Shooting ISO.  
Select an option.  
m].  
1
2
3
Auto: The flash will fire automatically when the subject  
or background is dark.  
Auto: The camera will select a proper flash setting for  
the scene it detects in Smart Auto mode.  
Select  
to use an appropriate ISO sensitivity based on the  
Available options may differ depending on the shooting conditions.  
brightness of the subject and lighting.  
Higher ISO sensitivities may result in more image noise.  
Shooting options 51  
   
Changing the camera’s focus  
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.  
apdv  
Using macro  
Using auto focus  
apdv  
Use macro to capture close-up photos of subjects, such as  
flowers or insects.  
To capture sharp photos, select the appropriate focus according  
to your distance from the subject.  
In Shooting mode, press [  
c].  
1
Normal (AF)  
Select an option.  
2
Icon  
Description  
Normal (AF): Focus on a subject farther than 32 in  
(80 cm).  
Try to hold the camera firmly to prevent blurry photos.  
Turn off the flash if the distance to the subject is less than 16 in  
(40 cm).  
Macro: Manually focus on a subject that is 2-32 in (5-  
80 cm) from the camera (39-59 in [100-150 cm] when  
you use the zoom).  
Shooting options 52  
   
Changing the camera’s focus  
apds  
Using tracking auto focus  
If you do not select a focus area, the focus frame will appear in the  
center of the screen.  
Tracking a subject may fail when:  
Tracking AF allows you to track and auto focus on your subject,  
even when you are moving.  
-
-
-
-
-
the subject is too small  
the subject moves excessively  
the subject is backlit or you are shooting in a dark place  
colors or patterns on the subject and the background are the same  
the camera shakes excessively  
In Shooting mode, press [m].  
1
2
3
Select Shooting Focus Area Tracking AF.  
When tracking a subject fails, the focus frame will appear as a white  
single-line frame ( ).  
If the camera fails to track the subject, you must reselect the subject  
to track.  
Focus on the subject you want to track and press [  
o].  
If the camera fails to focus, the focus frame will change to a red single-  
line frame (  
).  
If you use this function, you cannot set the timer options, Face  
Detection options, and Smart Filter effects.  
The white frame means that your camera is tracking the  
subject.  
The green frame means that your subject is in focus when you  
half-press [Shutter].  
Shooting options 53  
 
Changing the camera’s focus  
apdNs  
Adjusting the focus area  
You can get clearer photos by selecting an appropriate focus  
area according to your subject’s location in the scene.  
In Shooting mode, press [  
m].  
1
2
3
Select Shooting Focus Area.  
Select an option.  
Icon  
Description  
Center AF: Focus on the center of the frame (suitable  
when subjects are located at or near the center).  
Multi AF: Focus on one or more of 9 possible areas.  
Tracking AF: Focus on and track the subject. (p. 53)  
Shooting options 54  
 
apdb  
Using Face Detection  
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera  
adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use  
Smart Face Recognition to register faces and prioritize the focus on them.  
Detecting faces  
The camera automatically tracks the registered face.  
Face Detection may not be effective when:  
Your camera automatically detects up to 10 human faces in one  
scene.  
-
the subject is far from the camera (The focus frame will appear  
orange for the Smile Shot and Blink Detection.)  
it is too bright or too dark  
-
-
-
-
-
In Shooting mode, press [  
m
].  
1
2
the subject is not facing the camera  
the subject is wearing sunglasses or a mask  
the subject’s facial expression changes drastically  
the subject is backlit or the lighting conditions are unstable  
Select Shooting Face Detection Normal.  
Face Detection is not available when you set Smart Filter effects,  
Image Adjustment options, or Tracking AF.  
Depending on shooting options, available Face Detection options  
may differ.  
Depending on Face Detection options you selected, the timer function  
may not be available or available timer options may differ.  
Depending on Face Detection options you selected, some burst  
options are not available.  
When you capture photos of detected faces, they will be registered  
in the face list.  
You can view registered faces in order of priority in Playback mode.  
(p. 70) Even though faces are registered successfully, they may not be  
classified in Playback mode.  
A face detected in Shooting mode may not appear in the face list or  
Smart Album.  
The nearest face appears in  
a white focus frame and the  
rest of the faces appear in  
gray focus frames.  
The closer you are to the subjects, the quicker your camera will detect  
faces.  
The detected faces may not be registered if you set burst options  
such as Continuous, Motion Capture, or AEB.  
Shooting options 55  
   
Using Face Detection  
Capturing a smile shot  
The camera automatically releases the shutter when it detects a  
smiling face.  
Detecting eye blinking  
If your camera detects closed eyes, it will automatically capture 2  
photos in succession.  
In Shooting mode, press [  
m
].  
In Shooting mode, press [  
m
].  
1
2
3
1
2
Select Shooting Face Detection Smile Shot.  
Select Shooting Face Detection Blink Detection.  
Compose your shot.  
The camera automatically releases the shutter when it detects  
a smiling face.  
Hold your camera still while “Capturing” is displayed on the screen.  
If Blink Detection fails, the “Picture taken with eyes closed.”  
message appears. Capture another photo.  
When your subject smiles broadly,  
your camera can detect the smile  
more easily.  
Shooting options 56  
 
Using Face Detection  
Using Smart Face Recognition  
The camera may recognize and register faces incorrectly depending  
on lighting conditions, drastic changes in the subject's pose or face,  
and whether or not the subject is wearing glasses.  
The camera can automatically register up to 12 faces. If the camera  
recognizes a new face when 12 faces have already been registered, it  
will replace the lowest priority face with the new one.  
The camera automatically registers faces that you frequently  
photograph. The Smart Face Recognition feature will  
automatically prioritize the focus on those faces and on favorite  
faces. The Smart Face Recognition feature is available only when  
you use a memory card.  
The camera can detect up to 5 favorite faces in one scene.  
In Shooting mode, press [  
m].  
1
2
Select Shooting Face Detection Smart Face  
Recognition.  
The nearest face appears in a white focus frame and the rest of  
the faces appear in gray focus frames.  
: Faces that you have registered as favorites. (To register  
faces as favorites, refer to page 58.)  
: Faces that the camera automatically registers.  
Shooting options 57  
 
Using Face Detection  
When you are finished capturing the photos, the face list  
appears.  
Registering faces as your favorites (My Star)  
You can register your favorite faces to prioritize the focus and  
exposure on those faces. This feature is available only when you  
use a memory card.  
4
Your favorite faces are indicated with a  
on the face list.  
You can register up to 8 favorite faces.  
The flash will not fire when you register a favorite face.  
If you register the same face twice, you can delete one of the faces  
in the face list.  
In Shooting mode, press [  
m].  
1
2
3
Select Shooting Smart FR Edit My Star.  
Align your subjects face with the oval guideline, and then  
press [Shutter] to register the face.  
Viewing your favorite faces  
In Shooting mode, press [m].  
1
Select Shooting Smart FR Edit Face List.  
2
To change the ranking of your favorite faces, press [f], and then  
select Edit Ranking. (p. 70)  
To delete a favorite face, press [f], and then select Delete. (p. 71)  
Back  
Set  
If the subject’s face is not aligned with the oval guideline, the white  
frame will not appear.  
Capture 5 photos of the subject’s face: one each from the front, left,  
right, above, and below.  
Capture photos of one person at a time when registering faces.  
Shooting options 58  
 
Adjusting brightness and color  
Learn how to adjust the brightness and color for better image quality.  
Select a value to adjust the exposure.  
pdv  
Adjusting the exposure manually (EV)  
3
The photo will be brighter as exposure increases.  
When you adjust the exposure value, the icon will appear as  
shown below.  
Depending on the intensity of the ambient light, your photos  
may be too bright or dark. In these cases, you can adjust the  
exposure to get a better photo.  
Darker (-)  
Brighter (+)  
Neutral (0)  
In Shooting mode, press [  
m
].  
1
2
Once you adjust the exposure, the setting will be stored automatically.  
You may need to change the exposure value later to avoid  
overexposure or underexposure.  
If you cannot decide on an appropriate exposure, select AEB  
(Auto Exposure Bracket). The camera will capture 3 consecutive  
photos, each with a different exposure: normal, underexposed, and  
overexposed. (p. 63)  
Select Shooting or Movie EV.  
Shooting options 59  
   
Adjusting brightness and color  
p
pdv  
Compensating for backlighting (ACB)  
Changing the metering option  
When the light source is behind your subject or there is high  
contrast between your subject and the background, your subject  
is likely to appear dark in the photo. In this case, set the Auto  
Contrast Balance (ACB) option.  
The metering mode refers to the way in which a camera  
measures the quantity of light. The brightness and lighting of your  
photos will vary depending on the metering mode you select.  
In Shooting mode, press [m].  
1
2
3
Select Shooting or Movie Metering.  
Select an option.  
Icon  
Description  
Multi:  
Your camera divides the frame into several areas,  
and then measures the light intensity of each area.  
Without ACB  
With ACB  
Suitable for general photos.  
In Shooting mode, press [  
Select Shooting ACB.  
Select an option.  
m].  
Spot:  
1
2
3
Your camera measures only the light intensity of the  
very center of the frame.  
If a subject is not in the center of the frame, your  
photo may be improperly exposed.  
Icon  
Description  
Suitable for a subject with backlighting.  
Off: ACB is off.  
Center-weighted:  
Your camera averages the meter reading of the entire  
frame with emphasis placed on the center.  
On: ACB is on.  
Suitable for photos with subjects in the center of the  
frame.  
The ACB feature is not available when you set Continuous, Motion  
Capture, or AEB options.  
Shooting options 60  
     
Adjusting brightness and color  
In Shooting mode, press [  
m].  
Selecting a light source (White balance)  
pdv  
1
2
3
Select Shooting or Movie White Balance.  
The color of your photo depends on the type and quality of the  
light source. If you want the color of your photo to be realistic,  
select a White Balance setting that is appropriate for the lighting  
conditions, such as Auto WB, Daylight, Cloudy, or Tungsten.  
Select an option.  
Icon  
Description  
Auto WB: Automatically set the White Balance based  
on the lighting conditions.  
Daylight: For outdoor photos on a sunny day.  
Cloudy: For outdoor photos on a cloudy day or in  
shadows.  
Fluorescent_H: For shooting under a daylight  
Auto WB  
Daylight  
fluorescent or 3-way fluorescent light.  
Fluorescent_L: For shooting under white fluorescent  
light.  
Tungsten: For shooting indoor photos under  
incandescent bulbs or halogen lamps.  
Measure: Shutter (Custom Set): Use White Balance  
settings that you defined. (p. 62)  
Cloudy  
Tungsten  
Shooting options 61  
 
Adjusting brightness and color  
Defining your own White Balance  
You can customize the White Balance by capturing a photo of  
a white surface, such as a piece of paper, under the lighting  
conditions in which you intend to capture a photo. The White  
Balance feature will help you to match the colors in your photo  
with the actual scene.  
In Shooting mode, press [  
m].  
1
2
3
4
Select Shooting or Movie White Balance.  
Select Measure: Shutter.  
Aim the lens at a piece of white paper, and then press  
[Shutter].  
Shooting options 62  
p
Using burst modes  
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In  
these cases, select one of the burst modes to rapidly capture multiple photos.  
Icon  
Description  
Motion Capture: While you are pressing [Shutter], the  
camera captures VGA photos (6 photos per second;  
maximum of 30 photos).  
AEB:  
Capture 3 consecutive photos, each with a different  
exposure: normal, underexposed, and overexposed.  
Use a tripod to prevent blurry photos.  
In Shooting mode, press [  
Select Shooting Drive.  
Select an option.  
m].  
1
2
3
You can use the flash, timer, ACB, and Smart Filter options only when  
you select Single.  
When you select Motion Capture, your camera will set the resolution  
to VGA and set the ISO sensitivity to Auto.  
Depending on the Face Detection option you selected, some burst  
options may not be available.  
Icon  
Description  
Single: Capture a single photo.  
Continuous:  
While you are pressing [Shutter], the camera  
continuously captures photos.  
The maximum number of photos depends on the  
capacity of your memory card.  
Shooting options 63  
   
Applying effects/Adjusting images  
Available filters in Auto, Program, and DUAL IS modes  
apdv  
Applying Smart Filter effects  
Apply various filter effects to your photos and videos to create  
unique images.  
Icon  
Description  
Normal: No effect  
Miniature: Apply a tilt-shift effect to make the subject  
appear in miniature.  
Vignetting: Apply the retro-looking colors, high contrast,  
and strong vignette effect of Lomo cameras.  
Soft Focus: Hide facial imperfections or apply dreamy  
effects.  
Miniature  
Vignetting  
Old Film 1: Apply a vintage film effect 1.  
Old Film 2: Apply a vintage film effect 2.  
Half Tone Dot: Apply a halftone effect.  
Sketch: Apply a pen sketch effect.  
Fish-eye  
Sketch  
Fish-eye: Blacken the edges of the frame and distort  
objects to imitate the visual effect of a fisheye lens.  
In Shooting mode, press [m].  
Defog: Make image clearer.  
1
Classic: Apply a black and white effect.  
Select Shooting or Movie Smart Filter.  
2
3
Select an effect.  
Shooting options 64  
   
Applying effects/Adjusting images  
Icon  
Description  
Icon  
Description  
Sketch: Apply a pen sketch effect.  
Retro: Apply a sepia tone effect.  
Fish-eye: Distort close objects to imitate the visual effect of  
a fisheye lens.  
Negative: Apply a negative film effect.  
Custom RGB: Customize a color value.  
Defog: Make image clearer.  
Classic: Apply a black and white effect.  
Retro: Apply a sepia tone effect.  
Negative: Apply a negative film effect.  
Custom RGB: Customize a color value.  
When you select Sketch, the resolution will change to  
and below.  
Available filters in Movie mode  
Icon  
Description  
Normal: No effect  
Palette Effect 1: Create a vivid look with sharp contrast  
and strong color.  
Palette Effect 2: Make scenes clean and clear.  
Palette Effect 3: Apply a soft brown tone.  
Palette Effect 4: Create a cold and monotone effect.  
Miniature: Apply a tilt-shift effect to make the subject  
appear in miniature.  
Vignetting: Apply the retro-looking colors, high contrast,  
and strong vignette effect of Lomo cameras.  
Half Tone Dot: Apply a halftone effect.  
Shooting options 65  
Applying effects/Adjusting images  
Defining your own RGB tone  
If you select Miniature when you are recording a video, the speed of  
the video will increase.  
If you select Miniature when you are recording a video, the camera  
will not record sound.  
In Shooting mode, press [  
m
].  
1
2
3
4
Select Shooting or Movie Smart Filter.  
Select Custom RGB.  
If you select a Miniature, Vignetting, Half Tone Dot, Sketch, Fish-eye,  
or Defog, the recording speed will be set to  
resolution will be set to less than  
and the recording  
.
If you set Smart Filter effects, you cannot use the Face Recognition  
options, ACB, burst options, Image Adjustment options, Intelli zoom,  
or Tracking AF.  
Select a color (R: Red, G: Green, B: Blue).  
Back  
Move  
Select an option.  
5
6
Press [o] to save.  
Shooting options 66  
Applying effects/Adjusting images  
p
Saturation  
Description  
Adjusting your photos  
-
Decrease the saturation.  
Increase the saturation.  
Adjust the sharpness, saturation, or contrast of your photos.  
+
In Shooting mode, press [  
m].  
1
2
3
Select Shooting Image Adjust.  
Select 0 if you do not want to apply any effects (suitable for printing).  
If you set adjustment functions, you cannot use the Face Recognition  
and Smart Filter options.  
Select an option.  
Contrast  
Sharpness  
Saturation  
Adjust each value.  
4
Contrast  
Description  
-
Decrease the color and brightness.  
Increase the color and brightness.  
+
Sharpness  
Description  
Soften the edges on your photos (suitable for  
editing the photos on your computer).  
-
Sharpen the edges to improve the clarity of your  
photos. This may also increase the noise on your  
photos.  
+
Shooting options 67  
   
Viewing photos or videos in Playback mode  
Learn how to play back photos, videos, or voice memos and how to manage files.  
Photo file information  
Starting Playback mode  
View photos or play videos and voice memos stored in your  
camera.  
Press [  
P].  
1
2
The most recent file will be displayed.  
If the camera is off, it will turn on and display the most recent  
file.  
File Information  
Press [F  
] or [  
t
] to scroll through files.  
Play  
Press and hold [  
F
] or [ ] to scroll through files quickly.  
t
Icon  
Description  
If you want to view files stored in the internal memory, remove your  
memory card.  
The camera will not properly play back files of unsupported sizes or  
files that were captured with other cameras.  
Photo includes a voice memo  
Print order has been set (DPOF)  
Protected file  
Photo includes a registered face (available only when you  
use a memory card)  
Folder name – File name  
To display file information on the screen, press [  
D].  
Playback/Editing 69  
 
Viewing photos or videos in Playback mode  
Video file information  
Ranking your favorite faces  
You can rank your favorite faces. The favorite face feature is  
available only when you insert a memory card into the camera.  
In Playback mode, press [  
m
].  
1
2
3
Select File Options Face List Edit Edit Ranking.  
Select a face from the list, and then press [  
o].  
Play  
Capture  
Face List Edit  
1
2
3
4
4
5
6
8
Icon  
Description  
Video file  
Video length  
Back  
Set  
Press [  
and then press [  
D
] or [  
c
].  
] to change the ranking of the face,  
4
f
Playback/Editing 70  
 
Viewing photos or videos in Playback mode  
Canceling your favorite faces  
Viewing files by category in Smart Album  
You can delete your favorite faces. The favorite face feature is  
available only when you insert a memory card into the camera.  
View files by category, such as date, face, or file type.  
In Playback mode, rotate [Zoom] to the left.  
1
In Playback mode, press [  
m
].  
Select File Options Face List Edit Delete.  
Select a face, and then press [ ].  
Press [ ].  
Select Yes.  
1
2
3
4
5
Press [  
m].  
2
3
Select a category.  
o
f
Type  
Date  
Color  
Week  
Face  
Back  
Set  
Option  
Type  
Description  
View files by the file type.  
Date  
View files by the date they were saved.  
View files by the dominant color of the image.  
View files by the weekday they were saved.  
Color  
Week  
View files by recognized faces and favorite faces.  
(Up to 20 people)  
Face  
Playback/Editing 71  
   
Viewing photos or videos in Playback mode  
Viewing files as thumbnails  
Press [  
F
] or [  
t
] to scroll through files.  
4
5
Press and hold [  
F
] or [ ] to scroll through files quickly.  
t
Scan thumbnails of files.  
Press [ ] to return to the normal view.  
o
In Playback mode, rotate [Zoom] to the left to view  
thumbnails (9 at a time). Rotate [Zoom] to the left  
once or twice more to display more thumbnails (20  
at a time). Rotate [Zoom] to the right to return to the  
previous view.  
It may take some time for the camera to open Smart Album, change  
the category, or reorganize files.  
The front display may not activate after you access Smart Album.  
Filter  
To  
Description  
Scroll through files  
Delete files  
Press [  
D
], [  
c], [F], or [t].  
Press [f  
], and then select Yes.  
Playback/Editing 72  
   
Viewing photos or videos in Playback mode  
Protecting files  
Deleting files  
Protect your files from accidental deletion.  
Select files to delete in Playback mode.  
In Playback mode, press [  
m
].  
1
2
Deleting a single file  
You can select one file, and then delete it.  
Select File Options Protect Select.  
To protect all files, select All Lock.  
In Playback mode, select a file, and then press [  
f].  
1
Select the file you want to protect, and then press [  
o
].  
3
4
When the pop-up message appears, select Yes.  
2
Press [o] again to cancel your selection.  
Deleting multiple files  
You can select multiple files, and then delete them at once.  
Protected file  
In Playback mode, press [  
f].  
1
2
When the pop-up message appears, select Multiple  
Delete.  
Select  
Set  
Select files you want to delete, and then press [  
o].  
3
Press [o] again to cancel your selection.  
Press [f].  
Press [  
f
].  
4
5
You cannot delete or rotate a protected file.  
When the pop-up message appears, select Yes.  
Playback/Editing 73  
   
Viewing photos or videos in Playback mode  
Deleting all files  
Viewing photos  
Enlarge part of a photo or view photos as a slide show.  
You can select all files, and then delete them at once.  
In Playback mode, press [  
m].  
1
2
3
Enlarging a photo  
Select File Options Delete All.  
In Playback mode, rotate [Zoom] to the right to enlarge  
a portion of the photo. Rotate [Zoom] to the left to  
zoom out.  
When the pop-up message appears, select Yes.  
Copying files to a memory card  
Enlarged area  
Copy files from the internal memory to a memory card.  
Zoom ratio (The maximum  
zoom ratio differs depending  
on the photo resolution.)  
In Playback mode, press [  
m].  
1
2
3
Select File Options Copy to Card.  
When the pop-up message appears, select Yes.  
Trim  
Playback/Editing 74  
 
Viewing photos or videos in Playback mode  
Select a slide show effect option.  
To  
Description  
3
Skip to step 4 to start a slide show with no effects.  
Move the enlarged area  
Trim the enlarged photo  
Press [D  
], [  
c], [F], or [t].  
* Default  
Press [o  
] (it will be saved as a new file).  
Option Description  
Set whether or not to repeat the slide show. (Play,  
Repeat)  
Start  
When you view photos that were captured by another camera, the zoom  
ratio may differ.  
Set the photos you want to view as a slide show.  
All*: View all photos in a slide show.  
Images  
Date: View photos captured on a specific date in  
a slide show.  
Playing a slide show  
Select: View selected photos in a slide show.  
Apply effects and audio to a slide show of your photos. The slide  
show function does not work for videos or voice memos.  
Set the interval between photos. (1 sec*, 3 sec,  
5 sec, 10 sec)  
Interval  
Music  
You must set the Effect option to Off to set the  
interval.  
In Playback mode, press [  
m].  
1
2
Select Multi Slide Show.  
Set background audio. (Off*, Mist, Drops, Muse,  
Trip, Fall)  
Set a scene change effect between photos.  
(Off*, Calm, Shine, Relax, Lively, Sweet)  
Effect  
Select Off to cancel effects.  
When you use the Effect option, the interval  
between photos will be set to 1 second.  
Playback/Editing 75  
   
Viewing photos or videos in Playback mode  
Select Start Play.  
Playing a video  
In Playback mode, you can view a video, and then capture or trim  
parts of the playing video. You can save the captured or trimmed  
segments as new files.  
4
Select Repeat to loop the slide show.  
View the slide show.  
5
Press [  
o
] to pause the slide show.  
Press [o  
] again to resume the slide show.  
In Playback mode, select a video, and then press [  
o].  
1
2
Press [o], and then press [F] or [t] to stop the slide show and switch to  
View the video.  
Playback mode.  
Pause  
To  
Description  
Scan backward  
Press [  
Press [  
Press [  
F].  
Pause or resume  
playback  
o
].  
Scan forward  
t].  
Adjust the volume level  
Rotate [Zoom] to the left or right.  
Playback/Editing 76  
 
Viewing photos or videos in Playback mode  
Trimming a video  
Capturing an image from video  
While viewing a video, press [  
want the trimming to begin.  
o] at the point where you  
While viewing a video, press [o] at the point where you  
want to capture an image.  
1
1
Rotate [Zoom] to the right, and then press [  
o
].  
Press [ ].  
c
2
3
2
Press [o] at the point where you want the trimming to  
end.  
The resolution of the captured image will be the same as the original  
video.  
The captured image is saved as a new file.  
Rotate [Zoom] to the right.  
4
5
When the pop-up message appears, select Yes.  
The original video should be at least 10 seconds long.  
The camera will save the edited video as a new file.  
Playback/Editing 77  
 
Viewing photos or videos in Playback mode  
Adding a voice memo to a photo  
Playing a voice memo  
In Playback mode, select a photo, and then press  
1
Listening to a voice memo  
[
m].  
In Playback mode, select a voice memo, and then press  
1
Select File Options Voice Memo On.  
2
3
[
o].  
Press [Shutter] to record a short voice memo.  
Listen to the voice memo.  
2
Maximum recording time is 10 seconds.  
To  
Description  
Press [Shutter] to stop recording a voice memo.  
Scan backward  
Press [F].  
Pause or resume  
playback  
Press [  
o
].  
].  
].  
Playing voice memos that are attached to photos  
Scan forward  
Press [t  
In Playback mode, select a photo that includes a voice  
1
2
Stop playback  
Press [c  
memo, and then press [  
o].  
Adjust the volume level  
Rotate [Zoom] to the left or right.  
Listen to a voice memo.  
Press [o] to pause playback.  
] to resume playback.  
Press [o  
Playback/Editing 78  
 
Editing a photo  
Learn how to edit photos.  
The camera will save edited photos as new files.  
When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to  
a lower resolution.  
Resizing photos  
Rotating a photo  
Change the size of a photo and save it as a new file. You can set  
a photo to be displayed when the camera turns on.  
In Playback mode, select a photo, and then press  
1
[
m].  
In Playback mode, select a photo, and then press  
1
Select Edit Rotate.  
[
m
].  
2
3
Select an option.  
Select Edit Resize.  
2
3
Select an option.  
Select Start Image to save the photo as a start image.  
Right 90˚  
(p. 96)  
1984 X 1488  
Back  
Move  
The camera will overwrite the original file.  
Back  
Move  
Available resize options differ depending on the original size of the photo.  
Playback/Editing 79  
 
Editing a photo  
Defining your own RGB tone  
Applying Smart Filter effects  
Apply special effects to your photos.  
In Playback mode, select a photo, and then press  
[m].  
1
In Playback mode, select a photo, and then press  
1
[
m].  
Select Edit Smart Filter.  
2
3
4
Select Edit Smart Filter.  
2
3
Select Custom RGB.  
Select an effect.  
Select a color (R: Red, G: Green, B: Blue).  
To see available filter options, refer to page 64.  
Miniature  
Back  
Move  
Back  
Move  
Adjust the amount of the selected color.  
5
6
Press [o] to save.  
Playback/Editing 80  
 
Editing a photo  
Retouching faces  
Adjusting your photos  
Learn how to adjust the brightness, contrast, or saturation or how  
to correct the red-eye effect. If the center of a photo is dark, you  
can adjust it to be brighter. The camera will save an edited photo  
as a new file, but may convert it to a lower resolution.  
In Playback mode, select a photo, and then press  
1
[
m].  
Select Edit Image Adjust Face Retouch.  
2
3
Adjusting dark subjects (ACB)  
Select a level.  
As the number increases, the skin tone becomes brighter.  
In Playback mode, select a photo, and then press  
1
[
m
].  
Press [ ] to save.  
o
4
Select Edit Image Adjust ACB.  
2
3
Adjusting brightness, contrast, or saturation  
Press [o] to save.  
In Playback mode, select a photo, and then press  
1
[
m].  
Removing red-eye  
Select Edit Image Adjust.  
2
3
In Playback mode, select a photo, and then press  
1
[
m
].  
Select an adjusting option.  
Icon  
Description  
Brightness  
Contrast  
Select Edit Image Adjust Red-eye Fix.  
2
3
Press [o] to save.  
Saturation  
Adjust the option.  
4
5
Press [o] to save.  
Playback/Editing 81  
   
Editing a photo  
Adding noise to the photo  
Creating a print order (DPOF)  
Select photos to print and save print options in the Digital Print  
Order Format (DPOF). This information is saved in the MISC  
folder on your memory card for convenient printing on DPOF-  
compatible printers.  
In Playback mode, select a photo, and then press  
1
[
m
].  
Select Edit Image Adjust Add Noise.  
2
3
In Playback mode, press [  
m
].  
1
2
Press [o] to save.  
Select File Options DPOF Standard Select.  
Select All to print all photos.  
Select a photo to print, rotate [Zoom] to the left or right  
3
to select the number of copies, and then press [  
If you select All, press [ ] or [ ] to select the number of  
copies, and then press [ ].  
f].  
D
c
o
Press [ ].  
Select File Options DPOF Size Select.  
Select All to choose the print size for all photos.  
Select a photo to print, rotate [Zoom] to the left or right  
m
4
5
6
to select the print size, and then press [  
If you select All, press [ ] or [ ] to select the print size,  
and then press [ ].  
f].  
D
c
o
Playback/Editing 82  
 
Editing a photo  
Printing photos as thumbnails  
Print photos as thumbnails to check all the photos at once.  
In Playback mode, press [  
m].  
1
2
3
Select File Options DPOF Index.  
When the pop-up message appears, select Yes.  
You can take the memory card to a print shop that supports DPOF  
(Digital Print Order Format) or you can print photos directly through a  
DPOF-compatible printer at home.  
Photos with dimensions that are wider than the paper may be cut off  
on the left and right edges. Ensure that your photo dimensions are  
compatible with the paper you select.  
You cannot set DPOF options for photos stored in the internal  
memory.  
If you specify the print size, you can print photos only with DPOF  
1.1-compatible printers.  
Playback/Editing 83  
Viewing files on a TV or HDTV  
Play back photos or videos by connecting your camera to a TV with the A/V cable.  
In Shooting or Playback mode, press [  
m
].  
Turn on your TV, and then select a video output mode  
with the TV remote control.  
1
2
3
6
7
Select Settings Video Out.  
Turn on your camera.  
Select a video signal output for your country or region.  
(p. 98)  
The camera automatically enters into Playback mode when  
you connect it to a TV.  
Turn off your camera and TV.  
4
5
View photos or play videos using the camera buttons.  
8
Connect your camera to your TV with the A/V cable.  
Depending on the TV model, you may see some digital noise or part  
of an image may not appear.  
Images may not be centered on the TV screen depending on your  
TV settings.  
Video  
Audio  
Playback/Editing 84  
   
Viewing files on a TV or HDTV  
Viewing files on an HDTV  
Turn on your camera.  
6
7
You can view high-quality and uncompressed photos or videos  
on an HDTV using the optional HDMI cable. HDMI (High Definition  
Multimedia Interface) is supported by most HDTVs. For details,  
see the HDMI Kit manual.  
If you have an Anynet+ compatible Samsung HDTV, the HDTV  
will turn on automatically and display the camera screen.  
If you turn Anynet+ off, the HDTV does not turn on  
automatically.  
View files using the buttons on your camera or a remote  
control of your HDTV.  
In Shooting or Playback mode, press [  
Select Settings HDMI Output.  
Select an HDMI resolution.  
m].  
1
2
3
4
5
If your HDTV supports the Anynet+(CEC) profile, turn Anynet+ on in  
the camera’s settings menu (p. 98) to control the camera and TV with  
the TV’s remote control.  
Turn off your camera and HDTV.  
Anynet+ lets you control all connected Samsung A/V devices with the  
TV remote control.  
Connect your camera to your HDTV using the optional  
HDMI cable.  
The time it takes for the camera to connect to your HDTV may vary  
with the type of microSD or microSDHC card you use. A faster  
microSD or microSDHC card will not necessarily result in a faster  
HDMI transfer, because the main function of the card is to improve  
transfer rate during shooting.  
Playback/Editing 85  
 
Transferring files to your Windows computer  
Transfer files to your Windows computer, edit them with Intelli-studio, and upload them to the web.  
Requirements  
The requirements are recommendation only. It may not work properly  
even when the computer meets the requirements, depending on the  
condition of your computer.  
If your computer does not meet the requirements, videos may not play  
correctly or it may take longer to edit videos.  
Install DirectX 9.0c or above before you use the program.  
Your computer must be running Windows XP, Windows Vista,  
Windows 7, or Mac OS 10.4 or higher for you to connect the camera  
as a removable disk.  
Item  
CPU  
RAM  
OS  
Requirements  
Intel Pentium 4, 3.2 GHz or higher/  
AMD Athlon™ FX 2.6 GHz or higher  
Minimum 512 MB RAM (1 GB or more recommended)  
Windows XP SP2, Windows Vista, or Windows 7  
(32-bit editions)  
Hard disk  
capacity  
250 MB or more (1 GB and above recommended)  
The manufacturer is not responsible for any damages that result from using  
unqualified computers such as assembled computers.  
CD-ROM drive  
1024 X 768 pixels, 16-bit color display compatible  
monitor (1280 X 1024 pixels, 32-bit color display  
recommended)  
Others  
USB 2.0 port  
nVIDIA Geforce 7600GT or higher/ATI X1600 series  
or higher  
Microsoft DirectX 9.0c or higher  
* The programs may not work properly on 64-bit editions of Windows XP,  
Windows Vista, and Windows 7.  
Playback/Editing 86  
   
Transferring files to your Windows computer  
Turn on the camera.  
Transferring files with Intelli-studio  
5
6
The computer recognizes the camera automatically and Intelli-  
studio launches automatically.  
Intelli-studio will start automatically when you connect the camera  
to your computer with the USB cable.  
If you set the USB option to Select Mode, select Computer in the  
pop-up window.  
The battery will charge while the camera is connected to a computer with the  
USB cable.  
Select a destination folder on your computer, and then  
select Yes.  
In Shooting or Playback mode, press [  
m].  
1
2
3
4
Select Settings PC Software On.  
New files stored on the camera will automatically transfer to  
the selected folder.  
If your camera has no new files, the pop-up window for saving  
new files will not appear.  
Turn off the camera.  
Connect the camera to your computer with the USB  
cable.  
For Windows Vista and Windows 7, select Run iStudio.exe from the Auto  
Play window to start Intelli-studio.  
You must plug the end of the cable with the indicator light ( ) into  
S
your camera. If the cable is reversed, it may damage your files. The  
manufacturer is not responsible for any loss of data.  
Playback/Editing 87  
 
Transferring files to your Windows computer  
Using Intelli-studio  
Intelli-studio is a built-in program that allows you to play back and edit files. For details, select Help Help from the program toolbar.  
To enjoy more features, such as creating slide shows with templates, install the full version of Intelli-studio by selecting Web Support Update Intelli-studio “  
Start Update from the program toolbar.  
You can update the firmware of your camera by selecting Web Support Upgrade firmware for the connected device from the program toolbar.  
When you install the full version of Intelli-studio, you can download short animations for use in Children mode. Also, you can use Intelli-studio to edit videos  
you have captured, and then play them on the front display.  
If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool Install Intelli-studio on PC.  
You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.  
Intelli-studio supports the following formats:  
-
-
Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)  
Photos: JPG, GIF, BMP, PNG, TIFF  
1
2
3
4
5
6
7
%
$
#
8
9
0
@
!
Playback/Editing 88  
 
Transferring files to your Windows computer  
No.  
Description  
Transferring files by connecting the camera  
as a removable disk  
1
Open menus.  
2
3
4
Display files in the selected folder.  
Switch to the Photo edit mode.  
Switch to the Video edit mode.  
Connect the camera to your computer as a removable disk.  
In Shooting or Playback mode, press [  
m].  
1
2
3
4
Select Settings PC Software Off.  
Switch to the Sharing mode (to send files by email or  
upload files to websites, such as Flickr or YouTube).  
5
Turn off the camera.  
6
7
8
9
0
!
@
#
$
Enlarge or reduce the thumbnails in the list.  
Select a file type.  
Connect the camera to your computer with the USB  
cable.  
View files in the selected folder on your computer.  
Show or hide files on the connected camera.  
View files in the selected folder on the camera.  
View files as thumbnails or on a map.  
Browse folders stored on the camera.  
Browse folders stored on your computer.  
Move to the previous or next folder.  
You must plug the end of the cable with the indicator light ( ) into  
S
your camera. If the cable is reversed, it may damage your files. The  
manufacturer is not responsible for any loss of data.  
Print files, view files on a map, store files in My Folder, or  
register faces.  
%
Playback/Editing 89  
 
Transferring files to your Windows computer  
Turn on the camera.  
5
Disconnecting the camera (for Windows XP)  
With Windows Vista and Windows 7, the methods for  
disconnecting the camera are similar.  
The computer recognizes the camera automatically.  
If you set the USB option to Select Mode, select Computer in the  
pop-up window.  
If the status lamp on your camera is blinking, wait until  
it stops.  
1
On your computer, select My Computer Removable  
Disk DCIM 100PHOTO.  
6
7
Click  
computer screen.  
on the tool bar at the bottom right of your  
2
Drag or save files to your computer.  
Click the pop-up message.  
3
4
5
Click the message box indicating safely removed.  
Remove the USB cable.  
The camera may not disconnect safely while Intelli-studio is running. End the  
program before disconnecting the camera.  
Playback/Editing 90  
 
Transferring files to your Mac computer  
When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly  
from the camera to the computer without installing any programs.  
Mac OS 10.4 or later is supported.  
Connect your camera to a Macintosh computer with the  
USB cable.  
Turn on the camera.  
1
2
The computer recognizes the camera automatically and  
displays a removable disk icon.  
You must plug the end of the cable with the indicator light ( ) into  
your camera. If the cable is reversed, it may damage your files. The  
manufacturer is not responsible for any loss of data.  
S
If you set the USB option to Select Mode, select Computer in the  
pop-up window.  
Double-click the removable disk icon.  
Drag or save files to your computer.  
3
4
Playback/Editing 91  
 
Printing photos with a PictBridge photo printer  
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.  
Configuring print settings  
In Shooting or Playback mode, press [  
m].  
1
2
3
Select Settings USB Printer.  
Press [  
m
] to configure print settings.  
Turn on the printer, and then connect your camera to the  
printer with the USB cable.  
Images  
One Photo  
Auto  
Size  
Layout  
Type  
Auto  
Auto  
Quality  
Auto  
Exit  
Print  
Icon  
Description  
Images: Select whether to print the current photo or all photos.  
If the camera is off, press [POWER] or [  
P
] to turn it on.  
4
5
The printer recognizes the camera automatically.  
Size: Set the print size.  
Layout: Set the number of photos to be printed on a single  
sheet of paper.  
Press [F] or [t  
] to select a file to print.  
Press [m] to set printing options. See “Configuring print  
settings."  
Press [ ] to print.  
Printing starts. Press [F] to cancel printing.  
Type: Set the type of paper.  
Quality: Set the print quality.  
o
6
Date: Set to print the date.  
File Name: Set to print the file name.  
Reset: Reset settings to their default values.  
Some options may not be supported by some printers.  
Playback/Editing 92  
 
Settings menu  
Learn to configure your camera's settings.  
Select an item.  
Accessing the settings menu  
3
4
Medium  
Volume  
In Shooting or Playback mode, press [  
m].  
1
Off  
1
Start Sound  
Shutter Sound  
Beep Sound  
AF Sound  
Select a menu.  
2
1
On  
Volume  
Shooting  
Start Sound  
Shutter Sound  
Beep Sound  
AF Sound  
Sound  
Exit  
Back  
Front Display Settings  
Display  
Settings  
Select an option.  
Exit  
Change  
Volume  
Off  
Start Sound  
Shutter Sound  
Beep Sound  
AF Sound  
Option  
Description  
Low  
Medium  
High  
Sound  
Set various camera sounds and the volume. (p. 95)  
Customize the front display settings. (p. 95)  
Customize the main display settings. (p. 96)  
Front Display  
Settings  
Display  
Customize the settings for the camera system,  
such as memory format, default file name, and  
USB mode. (p. 97)  
Back  
Set  
Settings  
Press [m] to return to the previous screen.  
5
You can customize the front display settings only when you access the  
settings menu from the Shooting mode.  
Settings 94  
 
Settings menu  
Sound  
Front Display Settings  
* Default  
* Default  
Item  
Description  
Item  
Description  
Set the volume of any sound. (Off, Low, Medium*,  
High)  
Set the camera to automatically release the shutter  
when it detects a smiling face in Self Shot mode.  
(Off*, On)  
Volume  
Front Smile Shot  
Set the sound the camera emits when you turn on  
your camera. (Off*, 1, 2, 3)  
Start Sound  
Shutter Sound  
Beep Sound  
AF Sound  
Set the camera to automatically release the shutter  
when it detects a smiling face in Children mode.  
(Off*, On)  
Children Smile  
Shot  
Set the sound the camera emits when you press  
the shutter button. (Off, 1*, 2, 3)  
Set a sound the camera emits in Children mode.  
(Off, 1*, 2, 3, 4, 5)  
Set the sound the camera emits when you press  
the buttons or switch modes. (Off, 1*, 2, 3)  
Children Sound  
Set the camera to play the animation with sound  
through the front display when you turn it on (for  
shop display). (Off*, On)  
Set to emit a sound when you half-press the  
shutter button. (Off, On*)  
In Demo mode, you cannot capture photos  
or record videos. Press [Shutter] to switch to  
Shooting mode.  
Front Display  
Demo  
The Demo mode is not available if you turn  
on the camera in Playback mode or when the  
camera is connected to another device.  
Settings 95  
   
Settings menu  
Display  
* Default  
* Default  
Item  
Description  
Item  
Description  
Function  
Description  
Display a brief description of an option or menu.  
(Off, On*)  
Set the duration for reviewing a captured image  
before returning to the Shooting mode. (Off, 0.5  
sec*, 1 sec, 3 sec)  
Quick View  
Set a start image to display when the camera  
turns on.  
If you perform no operations for 30 seconds, the  
camera automatically switches to Power save  
mode. (Off*, On)  
Off*: Display no start image.  
Logo: Display a default image stored in the  
internal memory.  
In Power save mode, press any button other  
than [POWER] to resume using the camera.  
Even if you do not set the Power save mode,  
the screen will dim 30 seconds after the last  
operation to save power.  
Power Save  
Start Image  
User Image: Display a custom image. (p. 79)  
The camera will save only one User Image in the  
internal memory at a time.  
If you select a new photo as a User Image or  
reset your camera, the camera will delete the  
current image.  
Adjust the brightness of the screen. (Auto*, Dark,  
Normal, Bright)  
Display  
Brightness  
Normal is fixed in Playback mode even if you have  
selected Auto.  
Settings 96  
   
Settings menu  
Settings  
* Default  
* Default  
Item  
Description  
Item  
Description  
Format the internal memory and the memory card  
(formatting will delete all files, including protected  
files). (Yes, No)  
Specify how to name files.  
Reset: Set the file number to start from 0001  
when you insert a new memory card, format a  
memory card, or delete all files.  
Format  
Errors can occur if you use a memory card formatted by  
another brand of camera, a memory card reader, or a  
computer. Please format memory cards in the camera  
before using them to capture photos.  
Series*: Set the file number to resume from  
the previous file number when you insert a new  
memory card, format a memory card, or delete  
all files.  
Reset menus and shooting options (date and time,  
language, and video output settings will not be  
reset). (Yes, No)  
Reset  
The default name of the first folder is 100PHOTO  
and the default name of the first file is  
SAM_0001.  
File No.  
Language  
Time Zone  
Set a language for the display text.  
The file number increases one at a time from  
SAM_0001 to SAM_9999.  
The folder number increases one at a time from  
100PHOTO to 999PHOTO.  
The maximum number of files that can be stored  
in one folder is 9,999.  
The camera defines file names according to  
the Design rule for Camera File system (DCF)  
standard. If you intentionally change file names,  
the camera may not play back the files.  
Set the time zone for your location. When you  
travel to another country, select the appropriate  
time zone.  
Date/Time Set  
Date Type  
Set the date and time.  
Set a date format. (YYYY/MM/DD, MM/DD/  
YYYY, DD/MM/YYYY, Off*)  
Settings 97  
   
Settings menu  
* Default  
* Default  
Item  
Description  
Item  
Description  
Set whether or not to display the date and time on  
Set the video signal output for your region.  
captured photos. (Off*, Date, Date & Time)  
NTSC*: USA, Canada, Japan, Korea, Taiwan,  
Mexico  
The date and time will be displayed on the  
bottom right corner of the photo.  
Some printer models may not print the date and  
time properly.  
PAL (supports only BDGHI): Australia, Austria,  
Belgium, China, Denmark, England, Finland,  
Germany, Italy, Kuwait, Malaysia, Netherlands,  
New Zealand, Norway, Singapore, Spain,  
Sweden, Switzerland, Thailand  
Video Out  
Imprint  
If you select Text in  
s
mode or capture a  
photo with the front display, the camera will not  
display the date and time.  
Set a light to automatically turn on in dark places  
to help you focus. (Off, On*)  
AF Lamp  
Set the camera to automatically turn off when you  
perform no operations for a specified period.  
(Off, 1 min, 3 min*, 5 min, 10 min)  
Set whether or not to control the camera with a TV  
remote control when you connect it to an HDTV  
that supports the Anynet+(CEC) profile.  
On*: Control the camera with an HDTV remote  
control.  
Your settings will not change when you replace  
the battery.  
The camera will not automatically turn off when  
the camera is connected to a computer or printer,  
when you are playing a slide show or videos, and  
when you are recording a voice memo.  
Auto Power Off  
Anynet+  
(HDMI-CEC)  
Off: View files without using an HDTV remote  
control.  
Settings 98  
 
Settings menu  
* Default  
Item  
Description  
Set the resolution of photos when the camera  
plays back files on an HDTV via the HDMI cable.  
(NTSC: 1080i*, 720p, 480p/  
PAL: 1080i*, 720p, 576p)  
If the HDTV does not support the selected  
resolution, the HDTV automatically selects the  
next lower resolution.  
HDMI Output  
If you select 480p or 576p, the playback menus  
and Smart Album will not be available when you  
connect the camera to a TV.  
Select the mode to use when you connect the  
camera to a computer or printer with a USB cable.  
Computer*: Connect your camera to a  
computer for transferring files.  
USB  
Printer: Connect your camera to a printer for  
printing files.  
Select Mode: Manually select the USB mode  
when you connect your camera to a device.  
Set Intelli-studio to launch automatically when you  
connect your camera to your computer. (Off, On*)  
PC Software  
Settings 99  
 
Error messages  
When the following error messages appear, try these remedies.  
Error message  
Suggested remedies  
Turn off your camera, and then turn it on  
again.  
Card Error  
Remove your memory card, and then insert  
it again.  
Format your memory card.  
The inserted memory card is not supported by  
your camera. Insert a microSD or microSDHC  
memory card.  
Card not  
supported.  
File names do not match the DCF standard.  
Transfer the files on the memory card to your  
computer, and then format the card.  
DCF Full Error  
File Error  
Delete the damaged file or contact a service  
center.  
Your camera does not support the FAT file  
structure of the inserted memory card. Format  
the memory card on the camera.  
File system not  
supported.  
Low Battery  
Memory Full  
Insert a charged battery or recharge the battery.  
Delete unnecessary files or insert a new memory  
card.  
Capture photos or insert a memory card that  
contains some photos.  
No Image File  
Appendixes 101  
 
Camera maintenance  
Camera body  
Cleaning your camera  
Wipe gently with a soft, dry cloth.  
Camera lens and display  
Use a blower brush to remove dust and wipe the lens gently with  
a soft cloth. If any dust remains, apply lens cleaning liquid to a  
piece of cleaning paper and wipe gently.  
Never use benzene, thinners, or alcohol to clean the device. These  
solutions can damage the camera or cause it to malfunction.  
Do not press on the lens cover or use a blower brush on the lens  
cover.  
Appendixes 102  
 
Camera maintenance  
Using on beaches or shores  
Using or storing the camera  
Protect your camera from sand and dirt when you use it on  
beaches or in other similar areas.  
Inappropriate places to use or store the camera  
Your camera is not waterproof. Do not handle the battery,  
adapter, or memory card with wet hands. Operating the camera  
with wet hands may cause damage to your camera.  
Avoid exposing the camera to very cold or very hot  
temperatures.  
Avoid using your camera in areas with extremely high humidity,  
or where the humidity changes drastically.  
Avoid exposing the camera to direct sunlight and storing it in  
hot, poorly-ventilated areas, such as in a car during summer  
time.  
Storing for extended period of time  
When you store the camera for an extended period, place it in a  
sealed container with an absorbent material, such as silica gel.  
Protect your camera and the display from impact, rough  
handling, and excessive vibration to avoid serious damage.  
Remove the batteries from your camera when storing it for an  
extended period. Installed batteries may leak or corrode over  
time and cause serious damage to your camera.  
Avoid using or storing your camera in dusty, dirty, humid, or  
poorly-ventilated areas to prevent damage to moving parts and  
internal components.  
Over time, unused batteries will discharge and must be  
recharged before use.  
Do not use your camera near fuels, combustibles, or flammable  
chemicals. Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as the camera or  
its accessories.  
Use the camera with caution in humid environments  
When you transfer the camera from a cold environment to a warm  
one, condensation can form on the lens or internal components  
of the camera. In this situation, turn off the camera and wait for at  
least 1 hour. If condensation forms on the memory card, remove  
the memory card from the camera and wait until all moisture has  
evaporated before reinserting it.  
Do not store the camera where there are mothballs.  
Appendixes 103  
 
Camera maintenance  
Paint or metal on the outside of the camera may cause  
allergies, itchy skin, eczema, or swelling for people with  
sensitive skin. If you experience any of these symptoms, stop  
using the camera immediately and consult a doctor.  
Other cautions  
Do not swing your camera by the strap. This may cause injury  
to yourself or others or damage to your camera.  
Do not paint your camera, as paint can clog moving parts and  
prevent proper operation.  
Do not insert foreign objects into any of your camera’s  
compartments, slots, or access points. Damage due to  
improper use may not be covered by your warranty.  
Turn off the camera while not in use.  
Your camera consists of delicate parts. Avoid impacts to the  
camera.  
Do not allow unqualified personnel to service the camera or  
attempt to service the camera yourself. Any damage that results  
from unqualified service is not covered by your warranty.  
Protect the display from external force by keeping it in the case  
when not in use. Protect the camera from scratches by keeping  
it away from sand, sharp implements, or loose change.  
Do not expose the lens to direct sunlight, as this may discolor  
the image sensor or cause it to malfunction.  
About memory cards  
Protect your lens from fingerprints and scratches. Clean your  
lens with a soft, clean, debris-free lens cloth.  
Supported memory cards  
The camera may turn off if impacted from the outside. This is to  
Your camera supports microSD (Secure Digital) or microSDHC  
(Secure Digital High Capacity) memory cards.  
protect the memory card. Turn on the camera to use it again.  
While you use the camera, it may heat up. This is normal and  
should not affect your camera’s lifespan or performance.  
To read data with a PC or memory card reader,  
insert the memory card into a memory card  
adapter.  
When you use the camera in low temperatures, it may take  
some time to turn on, the color may be changed temporarily, or  
after-images may appear. These conditions are not malfunctions  
and they will correct themselves when the camera is returned to  
normal temperatures.  
Appendixes 104  
 
Camera maintenance  
Memory card capacity  
Cautions when using memory cards  
The memory capacity may differ depending on shooting scenes  
or shooting conditions. These capacities are based on a 1 GB  
microSD card:  
Insert a memory card in the correct direction. Inserting a  
memory card in the wrong direction may damage your camera  
and memory card.  
Do not use memory cards that have been formatted by other  
cameras or by a computer. Reformat the memory card with  
your camera.  
Size  
Super Fine  
108  
Fine  
212  
Normal  
312  
30 FPS  
15 FPS  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
123  
241  
353  
Turn off the camera when you insert or remove the memory  
card.  
144  
283  
417  
P
h
o
t
Do not remove the memory card or turn off your camera while  
the lamp is blinking, as this may damage your data.  
170  
332  
482  
328  
624  
882  
o
s
When the lifespan of a memory card has expired, you cannot  
store any more photos on the card. Use a new memory card.  
537  
980  
1,373  
1,931  
3,090  
Do not bend, drop, or subject memory cards with heavy impact  
or pressure.  
882  
1,471  
2,575  
1,626  
Avoid using or storing memory cards near strong magnetic  
Approx.  
12' 49"  
Approx.  
14' 27"  
Approx.  
25' 00"  
Approx.  
73' 27"  
Approx.  
23' 23"  
Approx.  
26' 04"  
Approx.  
48' 02"  
Approx.  
94' 20"  
fields.  
-
-
-
-
-
-
-
-
-
-
-
-
*
V
i
Avoid using or keeping memory cards in areas with high  
temperature, high humidity, or corrosive substances.  
d
e
o
s
Prevent memory cards from making contact with liquids, dirt, or  
foreign substances. If dirty, wipe the memory card clean with a  
soft cloth before you insert the memory card in your camera.  
Do not allow liquids, dirt, or foreign substances to come in  
contact with memory cards or the memory card slot. Doing so  
may cause memory cards or the camera to malfunction.  
* Available recording time may vary if you use the zoom. Several videos were  
recorded in succession to determine the total recording time.  
Appendixes 105  
 
Camera maintenance  
When you carry a memory card, use a case to protect the card  
from electrostatic discharges.  
Battery life  
Average shooting time /  
Number of photos  
Test conditions  
(when the battery is fully charged)  
Transfer important data to other media, such as a hard disk,  
CD, or DVD.  
When you use the camera for an extended period, the memory  
card may become warm. This is normal and does not indicate  
a malfunction.  
The battery life was measured under the  
following conditions: in  
p
mode, 16M  
resolution, Fine quality, OIS on.  
1. Set the flash option to Fill in, take a  
single shot, and zoom in or out.  
The manufacturer is not responsible for any loss of data.  
Approximately  
90 min/  
Approximately  
180 photos  
Photos  
2. Set the flash option to Off, take a  
single shot, and zoom in or out.  
3. Perform steps 1 and 2 for 30  
seconds and repeat for 5 minutes.  
Then turn off the camera for 1 minute.  
About the battery  
Use only Samsung-approved batteries.  
4. Repeat steps 1 to 3.  
Approximately  
Videos  
Record videos at 1280 X 720 HQ  
resolution and 30 FPS.  
Battery specifications  
65 min  
Specification  
Model  
Description  
BP70A  
The figures above are measured by Samsung’s standards and may differ  
depending on actual usage.  
Several videos were recorded in succession to determine the total recording  
time.  
Type  
Lithium-ion battery  
Cell capacity  
Voltage  
740 mAh (min. 700 mAh)  
3.7 V  
Charging time* (when the camera is  
switched off)  
Approximately 150 min  
* Charging the battery by connecting it to a computer may take longer.  
Appendixes 106  
 
Camera maintenance  
Low battery message  
Cautions about using the battery  
When the battery charge has fully discharged, the battery icon will  
turn red and the "Low Battery" message will appear.  
Protect batteries, chargers, and memory cards from  
damage  
Prevent batteries from making contact with metal objects, as this  
can create a connection between the + and – terminals of your  
battery and lead to temporary or permanent battery damage and  
may cause a fire or electric shock.  
Notes about using the battery  
Avoid exposing batteries or memory cards to very cold or very  
hot temperatures (below 0 ºC/32 ºF or above 40 ºC/104 ºF).  
Extreme temperatures can reduce the charging capacity of your  
batteries and can cause memory cards to malfunction.  
Notes about charging the battery  
If the indicator light is off, make sure that the battery is inserted  
correctly.  
When you use the camera for an extended period, the area  
around the battery chamber may become warm. This does not  
affect the normal use of the camera.  
If the camera is on while charging, the battery may not fully  
charge. Turn off the camera before charging the battery.  
Do not pull the power supply cord to disconnect the plug from  
the power outlet, as this may cause a fire or electric shock.  
Do not use your camera when you charge the battery. This may  
cause a fire or electric shock.  
In temperatures below 0 ºC/32 ºF, battery capacity and battery  
life may decrease.  
Do not pull the power supply cord to disconnect the plug from  
the power outlet, as this may cause a fire or electric shock.  
Battery capacity may decrease in low temperatures but will  
return to normal in milder temperatures.  
Wait to turn on the camera until after the battery has charged for  
at least 10 minutes.  
If you connect the camera to an external power source while  
the battery is depleted, using some high energy-consuming  
functions will cause the camera to turn off. To use the camera  
normally, recharge the battery.  
Appendixes 107  
 
Camera maintenance  
Using the flash or recording videos depletes the battery quickly.  
Charge the battery until the indicator light turns green.  
Handle and dispose of batteries and chargers with care  
Never dispose of batteries in a fire. Follow all local regulations  
when you dispose of used batteries.  
If the indicator light blinks in orange or does not illuminate,  
reconnect the cable, or remove the battery and insert it again.  
Never place batteries or cameras on or in heating devices,  
such as microwave ovens, stoves, or radiators. Batteries may  
explode when they are overheated.  
If you charge the battery when the cable is overheated or the  
temperature is too high, the indicator light may turn orange.  
Charging will start when the battery cools down.  
Overcharging batteries may shorten battery life. After charging is  
finished, disconnect the cable from your camera.  
Do not bend or place heavy objects on the AC cable. Doing so  
may damage the cable.  
Notes about charging with a computer connected  
Use only the provided USB cable.  
The battery may not charge when:  
-
-
-
you use a USB hub  
other USB devices are connected to your computer  
you connect the cable to the port on the front side of your  
computer  
-
the USB port of your computer does not support the power output  
standard (5 V, 500 mA)  
Appendixes 108  
Camera maintenance  
Personal injury or death can occur if the battery is  
handled carelessly or improperly. For your safety,  
follow these instructions for proper battery handling:  
Do not disassemble or puncture the battery with any  
sharp object.  
Avoid exposing the battery to high pressure or crushing  
forces.  
The battery can ignite or explode if not handled properly. If  
you notice any deformities, cracks, or other abnormalities  
in the battery, immediately discontinue use of the battery  
and contact a service center.  
Avoid exposing the battery to major impacts, such as  
dropping it from high places.  
Do not expose the battery to temperatures of 60 °C  
(140 °F) or above.  
Use only authentic, manufacturer-recommend battery  
chargers and adapters and charge the battery only by the  
methods described in this user manual.  
Do not allow the battery to come in contact with moisture  
or liquids.  
Do not place the battery near heating devices or expose  
it to excessively warm environments, such as the inside  
of an enclosed car in the summertime.  
Battery shall not be exposed to excessive heat such as  
sunshine, fire or the like.  
Do not place the battery in a microwave oven.  
Disposal guidelines  
Avoid storing or using the battery in hot, humid places,  
such as spas or shower enclosures.  
Dispose of the battery with care.  
Do not dispose of the battery in a fire.  
Do not rest the device on flammable surfaces, such as  
bedding, carpets, or electric blankets for a prolonged  
period.  
Disposal regulations may differ by country or region.  
Dispose of the battery in accordance with all local and  
federal regulations.  
When the device is switched on, do not leave it in any  
confined space for a prolonged period.  
Guidelines for charging the battery  
Charge the battery only by the method described in  
this user manual. The battery can ignite or explode if  
not charged properly.  
Do not allow battery terminals to come in contact with  
metallic objects, such as necklaces, coins, keys, or  
watches.  
Use only authentic, manufacturer-recommended, Lithium-  
ion replacement batteries.  
Appendixes 109  
Before contacting a service center  
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted  
the suggested remedy and are still having problems with your device, contact your local dealer or service center.  
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.  
Situation  
Suggested remedies  
Situation  
Suggested remedies  
Ensure that the battery is inserted.  
There is no space on the memory card.  
Delete unnecessary files or insert a new  
card.  
Cannot turn on the  
camera  
Ensure that the battery is inserted  
correctly. (p. 16)  
Format the memory card.  
Charge the battery.  
Charge the battery.  
The memory card is defective. Get a new  
memory card.  
Cannot capture photos  
Your camera may be in Power save  
mode. (p. 96)  
Make sure that the camera is switched  
on.  
The power turns off  
suddenly  
The camera may turn off to prevent the  
memory card from being damaged due  
to an impact. Turn on your camera again.  
Charge the battery.  
Make sure that the battery is inserted  
correctly.  
The battery may lose power more quickly  
in low temperatures (below 0 °C/32 ºF).  
Keep the battery warm by putting it into  
your pocket.  
The camera freezes  
The camera heats up  
Remove the battery and insert it again.  
While you use the camera, it may heat up.  
This is normal and should not affect your  
camera’s lifespan or performance.  
The camera is losing  
battery power quickly  
Using the flash or recording videos  
depletes the battery quickly. Recharge  
if needed.  
The flash option may be set to off. (p. 50)  
You cannot use the flash in some modes.  
The flash does not  
work  
Batteries are consumable parts that must  
be replaced over time. Get a new battery  
if the battery life is diminishing quickly.  
Appendixes 110  
   
Before contacting a service center  
Situation  
Suggested remedies  
Situation  
Suggested remedies  
Make sure that the focus option you set  
is suitable for close-up shots. (p. 52)  
The flash fires  
unexpectedly  
The flash may fire due to static electricity.  
The camera is not malfunctioning.  
Make sure that the lens is clean. If not,  
clean the lens. (p. 102)  
The date and time are  
incorrect  
Set the date and time in the display settings.  
(p. 97)  
The photo is blurry  
Make sure that the subject is within range  
of the flash. (p. 114)  
The display or buttons  
do not work  
Remove the battery and insert it again.  
An incorrect White Balance can create  
unrealistic color. Select the proper White  
Balance option to suit the light source.  
(p. 61)  
If you use your camera at very low  
The colors in the photo  
do not match the actual  
scene  
temperatures, it may cause the camera  
screen to malfunction or discolor. For better  
performance of your camera screen, use  
your camera in moderate temperatures.  
The camera display  
responds poorly  
Your photo is overexposed.  
Turn off the flash. (p. 50)  
Turn off your camera and then turn it on  
again.  
The photo is too bright  
The photo is too dark  
Adjust the ISO sensitivity. (p. 51)  
Adjust the exposure value. (p. 59)  
Remove your memory card and insert  
it again.  
The memory card has  
an error  
Your photo is underexposed.  
Format your memory card.  
Turn on the flash. (p. 50)  
See “Cautions when using memory cards”  
for more detail. (p. 105)  
Adjust the ISO sensitivity. (p. 51)  
Adjust the exposure value. (p. 59)  
If you change the name of a file, your  
camera may not play the file (the name of  
the file should meet the DCF standard). If  
you encounter this situation, play back the  
files on your computer.  
Cannot play back files  
Appendixes 111  
Before contacting a service center  
Situation  
Suggested remedies  
Situation  
Suggested remedies  
Make sure that the camera is correctly  
connected to the TV with the A/V cable.  
End Intelli-studio and restart the program.  
The TV does not  
display your photos  
You cannot use Intelli-studio on  
Macintosh computers.  
Make sure that your memory card  
contains photos.  
Make sure that PC Software is turned  
On in the settings menu. (p. 99)  
Make sure that the USB cable is  
connected correctly.  
Intelli-studio is not  
functioning properly  
Depending on your computer's  
specifications and environment, the  
program may not launch automatically. In  
this case, click Start My Computer  
Intelli-studio iStudio.exe on your  
computer.  
Your computer does  
not recognize your  
camera  
Make sure that your camera is switched  
on.  
Make sure that you are using a supported  
operating system.  
Your computer  
disconnects the  
camera while  
The file transmission may be interrupted by  
static electricity. Disconnect the USB cable  
and connect it again.  
transferring files  
Videos may not play on some video player  
Your computer cannot programs. To play video files captured with  
play videos  
your camera, install and use the Intelli-studio  
program on your computer. (p. 87)  
Appendixes 112  
Camera specifications  
Image sensor  
Focusing  
Type  
1/2.3" (Approximately 7.76 mm) CCD  
Approximately 16.1 mega-pixels  
Approximately 16.4 mega-pixels  
TTL auto focus (Multi AF, Center AF, Face Detection  
AF, Tracking AF, Smart Face Recognition AF)  
Type  
Effective pixels  
Total pixels  
Lens  
Tele (T)  
Wide (W)  
80 cm-infinity  
5 cm-80 cm  
5 cm-infinity  
Normal (AF)  
Macro  
150 cm-infinity  
100 cm-150 cm  
100 cm-infinity  
Range  
Samsung Lens f = 4.7 mm-23.5 mm  
(35 mm film equivalent: 26 mm-130 mm)  
Auto Macro  
Focal length  
F-stop range  
Shutter speed  
F3.3 (W)-F5.9 (T)  
Auto: 1/8-1/2,000 sec.  
Still image mode: 1.0X-5.0X (Optical zoom X Digital  
zoom: 25.0X)  
Program: 1-1/2,000 sec.  
Night: 8-1/2,000 sec.  
Fireworks: 2 sec.  
Digital zoom  
Playback mode: 1.0X-13.5X  
Display  
Exposure  
Control  
Type  
TFT LCD  
Program AE  
Main display: 3.0" (7.6 cm) QVGA (230K)  
Front display: 1.5" (3.8 cm) 61 K TFT LCD  
Feature  
Metering  
Multi, Spot, Center-weighted, Face Detection  
2EV (1/3 EV Step)  
Compensation  
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,  
ISO 1600, ISO 3200  
ISO equivalent  
Appendixes 113  
 
Camera specifications  
Flash  
Date Imprinting  
Date & Time, Date, Off  
Shooting  
Mode  
Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix  
Wide: 0.2 m-3.5 m (ISO Auto)  
Tele: 0.5 m-2.0 m (ISO Auto)  
Range  
Modes: Smart Auto (Portrait, Night Portrait,  
Backlight Portrait, Night, Backlight, Landscape,  
White, Natural Green, Blue Sky, Sunset, Macro,  
Macro text, Macro Color, Tripod, Action, Fireworks),  
Auto, Program, DUAL IS, Beauty Shot, Night,  
Scene (Magic Frame, Object Highlight, Landscape,  
Text, Sunset, Dawn, Backlight, Beach & Snow)  
Recharging time  
Approximately 4 sec.  
Shake reduction  
Photos  
DUAL IS [Optical Image Stabilization (OIS) + Digital Image Stabilization (DIS)]  
Effect  
Drive: Single, Continuous, Motion Capture, AEB  
Timer: 10 Sec, 2 Sec, Double (10 Sec, 2 Sec)  
Smart Filter: Normal, Miniature, Vignetting, Soft  
Focus, Old Film 1, Old Film 2, Half Tone Dot,  
Sketch, Fish-eye, Defog, Classic, Retro, Negative,  
Custom RGB  
Photo Shooting  
mode  
Modes: Smart Scene Detection (Landscape, Blue  
Sky, Natural Green, Sunset), Movie  
Image Adjust: Sharpness, Contrast, Saturation  
Format: MP4 (H.264) (Max recording time: 20 min)  
Size: 1280 X 720 HQ Fine, 1280 X 720 Normal,  
640 X 480 Normal, 320 X 240 Normal  
Smart Filter: Normal, Palette Effect 1, Palette Effect 2,  
Palette Effect 3, Palette Effect 4, Miniature, Vignetting,  
Half Tone Dot, Sketch, Fish-eye, Defog, Classic,  
Retro, Negative, Custom RGB  
Video Shooting  
mode  
Videos  
Frame Rate: 30 FPS, 15 FPS  
Sound Alive: Sound Alive On, Sound Alive Off,  
Mute  
White Balance  
OIS: On, Off  
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,  
Measure: Shutter (Custom Set)  
Video editing (embedded): Pause during recording,  
Still image capture, Time trimming  
Appendixes 114  
Camera specifications  
Playback  
DCF, EXIF 2.21, DPOF 1.1, PictBridge 1.0  
Still Image: JPEG (DCF)  
Single image, Thumbnails, Multi Slide Show with  
File format  
Movie Clip: MP4 (Video: MPEG-4.AVC/H.264,  
Audio: AAC)  
Music and Effect, Movie clip, Smart Album*  
* Smart Album category: Type, Date, Color, Week,  
Face  
Type  
Edit  
Audio file: WAV  
For 1 GB microSD: Number of photos  
Resize, Rotate, Image Adjust, Smart Filter, Trim  
Normal  
312  
Super Fine  
108  
Fine  
Image Adjust: Red-eye Fix, ACB, Face Retouch,  
Brightness, Contrast, Saturation, Add Noise  
4608 X 3456  
4608 X 3072  
4608 X 2592  
3648 X 2736  
2592 X 1944  
1984 X 1488  
1920 X 1080  
1024 X 768  
212  
241  
Smart Filter: Normal, Miniature, Vignetting, Soft-  
Focus, Old Film 1, Old Film 2, Half Tone Dot,  
Sketch, Fish-eye, Defog, Classic, Retro, Negative,  
Custom RGB  
353  
123  
Effect  
417  
144  
283  
482  
170  
332  
Image size  
882  
328  
624  
Voice recording  
1,373  
1,931  
3,090  
537  
980  
Voice Recording (Maximum 10 hours)  
Voice Memo in a photo (Maximum 10 sec.)  
882  
1,471  
2,575  
1,626  
These figures are measured under Samsung’s  
Storage  
standard conditions and may vary depending on the  
shooting conditions and camera settings.  
Internal memory: Approximately 30 MB  
External memory (Optional): microSD card (up to  
2 GB guaranteed), microSDHC card (up to 8 GB  
guaranteed)  
Media  
Internal memory capacity may not match these  
specifications.  
Appendixes 115  
Camera specifications  
Interface  
Operating Temperature  
0-40 °C  
Digital output  
connector  
USB 2.0  
Operating Humidity  
5-85 %  
Audio input/output Internal speaker (Mono), Microphone (Mono)  
A/V: NTSC, PAL (selectable)  
Software  
Video output  
HDMI 1.4: NTSC, PAL (selectable)  
Intelli-studio  
DC power input  
connector  
20 pin, 4.2 V  
Specifications may change without notice to improve performance.  
Power source  
Rechargeable  
battery  
Lithium-ion battery (BP70A, 740 mAh: Min 700 mAh)  
The power source may differ depending on your region.  
Dimensions (W X H X D)  
95.3 X 57.3 X 19.0 mm (without protrusions)  
Weight  
153.3 g (without battery and memory card)  
Appendixes 116  
Glossary  
ACB (Auto Contrast Balance)  
Composition  
This feature automatically improves the contrast of your images  
when the subject is backlit or when there is a high contrast  
between your subject and the background.  
Composition in photography means arranging objects in a photo.  
Usually, abiding by the rule of thirds leads to a good composition.  
DCF (Design rule for Camera File system)  
AEB (Auto Exposure Bracket)  
A specification to define a file format and file system for digital  
cameras created by the Japan Electronics and Information  
Technology Industries Association (JEITA).  
This feature automatically captures several images at different  
exposures to help you capture a properly-exposed image.  
AF (Auto Focus)  
Depth of field  
A system that automatically focuses the camera lens on the  
subject. Your camera uses the contrast to focus automatically.  
The distance between the nearest and farthest points that can  
be acceptably focused in a photograph. Depth of field varies with  
lens aperture, focal length, and distance from the camera to the  
subject. Selecting a smaller aperture, for example, will increase  
the depth of field and blur the background of a composition.  
Aperture  
The aperture controls the amount of light that reaches the  
camera’s sensor.  
Digital zoom  
A feature that artificially increases the amount of zoom available  
with a zoom lens (Optical zoom). When using the Digital zoom,  
the image quality will deteriorate as the magnification increases.  
Camera shake (Blur)  
If the camera is moved while the shutter is open, the entire image  
may appear blurred. This occurs more often when the shutter  
speed is slow. Prevent camera shake by raising the sensitivity,  
using the flash, or using a faster shutter speed. Alternately, use a  
tripod, the DIS or OIS function to stabilize the camera.  
DPOF (Digital Print Order Format)  
A format for writing printing information, such as selected images  
and number of prints, on a memory card. DPOF-compatible  
printers, sometimes available at photo shops, can read the  
information from the card for convenient printing.  
Appendixes 117  
 
Glossary  
EV (Exposure Value)  
Focal length  
All the combinations of the camera’s shutter speed and lens  
aperture that result in the same exposure.  
The distance from the middle of the lens to its focal point  
(in millimeters). Longer focal lengths result in narrower angles of  
view and the subject is magnified. Shorter focal lengths result in  
wider angles of view.  
EV Compensation  
This feature allows you to quickly adjust the exposure value  
measured by the camera, in limited increments, to improve the  
exposure of your photos. Set the EV compensation to -1.0 EV to  
adjust the value one step darker and 1.0 EV to one step brighter.  
H.264/MPEG-4  
A high-compression video format established by international  
standard organizations ISO-IEC and ITU-T. This codec is capable  
of providing good video quality at low bit rates developed by the  
Joint Video Team (JVT).  
Exif (Exchangeable Image File Format)  
A specification to define an image file format for digital cameras  
created by the Japan Electronic Industries Development  
Association (JEIDA).  
Image sensor  
The physical part of a digital camera that contains a photosite for  
each pixel in the image. Each photosite records the brightness of  
the light that strikes it during an exposure. Common sensor types  
are CCD (Charge-coupled Device) and CMOS (Complementary  
Metal Oxide Semiconductor).  
Exposure  
The amount of light allowed to reach the camera’s sensor.  
Exposure is controlled by a combination of the shutter speed, the  
aperture value, and ISO sensitivity.  
ISO sensitivity  
The sensitivity of the camera to light, based on the equivalent film  
speed used in a film camera. At higher ISO sensitivity settings,  
the camera uses a higher shutter speed, which can reduce blur  
caused by camera shake and low light. However, images with  
high sensitivity are more susceptible to noise.  
Flash  
A speed light that helps to create adequate exposure in low-light  
conditions.  
Appendixes 118  
Glossary  
JPEG (Joint Photographic Experts Group)  
Noise  
A lossy method of compression for digital images. JPEG images  
are compressed to reduce their overall file size with minimal  
deterioration of the image resolution.  
Misinterpreted pixels in a digital image that may appear as  
misplaced or random, bright pixels. Noise usually occurs when  
photos are shot with a high sensitivity or when a sensitivity is  
automatically set in a dark place.  
LCD (Liquid Crystal Display)  
Optical zoom  
A visual display commonly used in consumer electronics. This  
display needs a separate backlight, such as CCFL or LED, to  
reproduce colors.  
This is a general zoom which can enlarge images with a lens and  
does not deteriorate quality of images.  
Macro  
Quality  
This feature allows you to capture close-up photos of very small  
objects. When using the macro feature, the camera can maintain  
a sharp focus on small objects at a near life-size ratio (1:1).  
An expression of the rate of compression used in a digital image.  
Higher quality images have a lower rate of compression, which  
usually results in a larger file size.  
Metering  
Resolution  
The metering refers to the way in which the camera measures the  
quantity of light to set the exposure.  
The number of pixels present in a digital image. High resolution  
images contain more pixels and typically show more detail than  
low resolution images.  
MJPEG (Motion JPEG)  
Shutter speed  
A video format which is compressed as a JPEG image.  
Shutter speed refers to the amount of time it takes to open and  
close the shutter, and it is an important factor in the brightness of  
a photo, as it controls the amount of light which passes through  
the aperture before it reaches the image sensor. A fast shutter  
speed allows less time to let light in and the photo becomes  
darker and more easily freezes subjects in motion.  
Appendixes 119  
Glossary  
Vignetting  
A reduction of an image’s brightness or saturation at the periphery  
(outer edges) compared to the center of the image. Vignetting  
can draw interest to subjects positioned in the center of an  
image.  
White balance (color balance)  
An adjustment of the intensities of colors (typically the primary  
colors red, green, and blue), in an image. The goal of adjusting  
the white balance, or color balance, is to correctly render the  
colors in an image.  
Appendixes 120  
Correct Disposal of This Product  
Correct disposal of batteries in this product  
(Waste Electrical & Electronic Equipment)  
(Applicable in the European Union and other European  
countries with separate battery return systems)  
(Applicable in the European Union and other European  
countries with separate collection systems)  
This marking on the battery, manual or packaging indicates that  
the batteries in this product should not be disposed of with other  
household waste at the end of their working life. Where marked, the  
chemical symbols Hg, Cd or Pb indicate that the battery contains  
mercury, cadmium or lead above the reference levels in EC Directive  
2006/66. If batteries are not properly disposed of, these substances  
can cause harm to human health or the environment.  
This marking on the product, accessories or literature indicates that  
the product and its electronic accessories (e.g. charger, headset, USB  
cable) should not be disposed of with other household waste at the  
end of their working life. To prevent possible harm to the environment  
or human health from uncontrolled waste disposal, please separate  
these items from other types of waste and recycle them responsibly to  
promote the sustainable reuse of material resources. Household users  
should contact either the retailer where they purchased this product,  
or their local government office, for details of where and how they can  
take these items for environmentally safe recycling. Business users  
should contact their supplier and check the terms and conditions of the  
purchase contract. This product and its electronic accessories should  
not be mixed with other commercial wastes for disposal.  
To protect natural resources and to promote material reuse, please  
separate batteries from other types of waste and recycle them through  
your local, free battery return system.  
This Class [B] digital apparatus complies with Canadian  
ICES-003.  
PlanetFirst represents Samsung Electronics'  
commitment to sustainable development and social  
responsibility through eco-driven business and  
management activities.  
Appendixes 121  
FCC notice  
NOTE:  
Declaration of Conformity  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of  
the following measures:  
Trade Name  
: Samsung Electronics America, Inc.  
Model No.  
: Samsung PL170/PL171  
Responsible Party  
Address  
: Samsung Electronics America, Inc.  
: 85 Challenger Road, Ridgefield Park,  
NJ 07660  
Telephone No.  
: 1-800-SAMSUNG (726-7864)  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2)  
this device must accept any interference received, including  
interference that may cause undesired operation.  
- Reorientate, or relocate, the receiving antenna.  
- Increase the distance between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
- Consult the dealer or an experienced radio / TV technician for  
help.  
CAUTION:  
Changes or modifications not expressly approved by the  
manufacturer responsible for compliance could void the user’s  
authority to operate the equipment.  
Appendixes 122  
 
Please refer to the warranty that came with your product or  
service or inquiries.  

Victor 1240 3A User Manual
Toshiba Camileo X100 User Manual
Sony HVR A1U User Manual
Sony HVL FSL1 User Manual
Sony FACC1AM User Manual
Sony CDX 727 User Manual
Senco PC1130 User Manual
Samsung VP L770 User Manual
Samsung VP D353(i) User Manual
Rockford Fosgate RFX8220 User Manual