Samsung BD C5900 User Manual

BD-C5900

Blu-ray Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Safety Information

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF ELECTRIC The explanation point within the triangle

triangle is a warning sign alerting you of

dangerous voltage inside the product.

SHOCK, DO NOT REMOVE COVER (OR BACK)

is a warning sign alerting you of important

NO USER SERVICEABLE PARTS INSIDE. REFER instructions accompanying the product.

SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

CLASS 1 LASER PRODUCT

•

To reduce the risk of fire or electric shock, do

This Compact Disc player is classified as a CLASS

1 LASER product. Use of controls, adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

not expose this appliance to rain or moisture.

FCC NOTE (for U.S.A)

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and on.

Complies with 21CFR 1040.10 except for

deviations pursuant to Laser Notice No. 50, dated

June 24, 2007.

DANGER :

•

VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID DIRECT EXPOSURE TO

BEAM. (FDA 21 CFR)

CAUTION :

•

CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE

TO THE BEAM (IEC 60825-1)

The user is encouraged to try to correct the

interference by one or more of the following

measures.

THIS PRODUCT UTILIZES A LASER. USE

OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND DO

NOT REPAIR YOURSELF. REFER SERVICING

TO QUALIFIED PERSONNEL.

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

•

Connect this equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV

technician for help.

This class B digital product meets all

requirements of the Canadian Interference -

Causing Equipment Regulations.

CLASS 1

KLASSE 1

LUOKAN 1

KLASS 1

LASER PRODUCT

LASER PRODUKT

LASER LAITE

Note to CATV system installer

LASER APPARAT

PRODUCTO LÁSER CLASE 1

This reminder is provided to call CATV system

installer’s attention to Article 820-40 of the

National Electrical Code (Section 54 of Canadian

Electrical Code, Part I) that provides guidelines

for proper grounding and, in particular, specifies

that the cable ground shall be connected to the

grounding system of the building as close to the

point of cable entry as practical.

NOTE

✎

If the Region number of a Blu-ray Disc/DVD disc

does not correspond to the Region number of this

player, the player cannot play the disc.

▪

English

ꢁ

Safety Information

Precautions

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is

Important Safety Instructions

Read these operating instructions carefully before

using the unit. Follow all the safety instructions

listed below.

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Keep these operating instructions handy for future

reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

Disc Storage & Management

4. Follow all instructions.

Disc Handling

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

Disc Shape

7. Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

•

Use discs with regular

shapes. If an irregular disc

(a disc with a special shape)

is used, this player may be damaged.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

Holding discs

•

Avoid touching the surface of a

disc where recording is performed.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet.

Blu-ray Discs

•

If the player is not used for a long period of time,

remove the Blu-ray Disc from the player and

store it in its case.

•

Be careful not to leave fingerprints or scratches

on the surface of the Blu-ray Disc.

DVD-VIDEO, Audio CD (CD-DA)

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

•

Wipe off dirt or contamination on the disc with a

soft cloth.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket,

or table specified by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

ꢂ

English

•

Be sure to remove the disc and turn off the

player after use.

Disc Storage

Be careful not to damage the disc because the

data on these discs is highly vulnerable to the

environment.

Disconnect the AC power cord from the AC

outlet when you don’t intend to use the player

for long periods of time.

•

Do not keep under direct sunlight.

Keep in a cool ventilated area.

Store vertically.

•

To clean a disc, wipe it in a straight

line from the inside to the outside of

the disc.

Keep in a clean protection jacket.

•

Do not expose the player to any

liquid.

If you move your player suddenly from a cold

place to a warm place, condensation may

generate on the operating parts and lens and

cause abnormal disc playback. If this occurs,

wait for two hours before connecting the plug to

the power outlet.

When the AC plug is connected to a wall outlet,

the player will still draw power (standby mode)

when it is turned off.

•

Apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids, such

as vases, shall be placed on the apparatus.

Then insert the disc and try to play back again.

The main plug is used as a disconnect device

and shall stay readily operable at any time.

Handling Cautions

•

Do not write on the printed side with a ball-point

pen or pencil.

Maintenance of Cabinet

Do not use record cleaning sprays or antistatic.

Also, do not use volatile chemicals, such as

benzene or thinner.

For safety reasons, be sure to disconnect the AC

power cord from the AC outlet.

•

Do not use benzene, thinner, or other solvents

for cleaning.

•

Do not apply labels or stickers to discs. (Do not

use discs fixed with exposed tape adhesive or

leftover peeled-off stickers.)

Wipe the cabinet with a soft cloth.

•

Do not use scratch-proof protectors or covers.

Restrictions on Playback

Do not use discs printed with label printers

available on the market.

•

This player may not respond to all operating

commands because some Blu-ray, DVD and

CD discs allow specific or limited operation and

features during playback.

•

Do not load warped or cracked discs.

Before connecting other components to this

player, be sure to turn them all off.

Please note that this is not a defect in the

player.

•

Do not move the player while a disc is being

played as the disc may be scratched or broken,

or the player’s internal parts may be damaged.

•

Samsung cannot assure that this player will

play every disc bearing the Blu-ray Disc, DVD

or CD logo because disc formats evolve, and

problems and errors may occur during the

creation of Blu-ray Disc, DVD, CD software

and/or the manufacture of discs.

•

Do not put a flower vase filled with water or any

small metal objects on the player.

Be careful not to put your hand into the disc

tray.

Do not place anything other than the disc in the

disc tray.

Please contact the SAMSUNG customer care

center if you have questions or encounter

difficulty in playing Blu-ray, DVD, or CD discs

in this player. Also, refer to rest of this user

manual for additional information on playback

restrictions.

Exterior interferences such as lightning and

static electricity can affect the normal operation

of this player. If this occurs, turn the player

off and on again with the POWER button, or

disconnect and then reconnect the AC power

cord to the AC power outlet. The player will

operate normally.

English

ꢃ

Contents

Blu-ray Disc Features

KEy FEATURES

Blu-ray Disc Player Features

Warning

SAFETy INFORMATION

Precautions

Important Safety Instructions

Disc Storage & Management

Disc Handling

10 Before using the User Manual

GETTING STARTED

Disc Types and Contents that can be played.

Disc types that cannot be played

Blu-ray Disc Compatibility

Disc Types

Region Code

Logos of Discs that can be played

14 Accessories

15 Front Panel

16 Front Panel Display

17 Rear Panel

18 Remote Control

Tour of the Remote Control

Setting the Remote Control

Controllable TV Codes

20 Connecting to a TV

CONNECTIONS

Case 1 : Connecting to a TV with an HDMI Cable

- Best Quality (Recommended)

Case 2 : Connecting to a TV with DVI Cable

- Best Quality (Recommended)

Case 3 : Connecting to a TV (Component)

- Better Quality

Case 4 : Connecting to a TV (Video)

- Good Quality

ꢄ

English

24 Connecting to an Audio System

CONNECTIONS

Case 1 : Connecting to an Audio System

(HDMI Supported Amplifier) - Best Quality

(Recommended)

Case 2 : Connecting to an Audio System

(Dolby Digital, DTS Amplifier) - Better Quality

Case 3 : Connecting to an Audio System

(2 Channel Amplifier) - Good Quality

26 Connecting to the Network

Cable Network

Wireless Network

28 Before Starting (Initial Settings)

29 Setting the Menu

30 Display

SETUP

TV Aspect

BD Wise (Samsung Players only)

Resolution

HDMI Format

Movie Frame (24Fs)

Progressive Mode

Still Mode

HDMI Deep Color

33 Audio

Digital Output

PCM Downsampling

Dynamic Range Control

Downmixing Mode

DTS Neo:6

35 System

Initial Settings

Internet@TV Screen Size

Anynet+(HDMI-CEC)

BD Data Management

Clock

DivX(R) Registration

DivX(R) Deactivation

English

ꢅ

Contents

37 Network

SETUP

Network Settings

Network Status

BD-LIVE Internet Connection

41 Language

41 Security

Parental Rating

Change Password

41 General

Background

Energy Saving

Front Display

Power On/Off Sound

42 Support

Software Upgrade

Contact Samsung

44 Playing a Disc

BASIC FUNCTIONS

Playback

Disc Structure

44 Using the Disc menu/Title menu/Popup menu

Using the Disc Menu

Using the Title Menu

Playing the Title List

Using the Popup Menu

45 Using the Search and Skip Functions

Searching for a Desired Scene

Skipping Chapters

45 Slow Motion Play/Step Motion Play

Slow Motion Play

Step Motion Play

46 Repeat Playback

Repeat the Title or Chapter

Repeat the Section

46 Using the TOOLS button

Moving to a Desired Scene Directly

Selecting the Audio Language

Selecting the Subtitle Language

Changing the Camera Angle

Selecting the Picture Setting

Setting BONUSVIEW

ꢆ

English

48 Listening to Music

BASIC FUNCTIONS

Buttons on the Remote Control used for Music

Playback

Playing an Audio CD (CD-DA)/MP3

Repeat an Audio CD (CD-DA)/MP3

Playlist

50 Playing back a Picture

Playing a JPEG Disc

Using the TOOLS button

51 Playing back a USB Storage Device

Notes on USB connection

53 Using Internet@TV

NETWORK SERvICES

APPENDIx

Getting Started with Internet@TV

Settings

Samsung Apps

57 BD-LIVE™

57 Software Upgrade Notification

57 Using the AllShare Function

59 Troubleshooting

62 Index

63 Specifications

Compliance and Compatibility Notice

Copy Protection

Network Service Disclaimer

License

English

ꢇ

Getting Started

Before using the User Manual

Disc Types and Contents that can be played.

Term

Logo

Icon

Definition

BD-ROM

This involves a function available on a BD-ROM.

�

BD-RE/-R

This involves a function available on a BD-RE/-R disc recorded in the BD-RE format.

This involves a function available on a DVD-VIDEO.

DVD-VIDEO

DVD-RW(V)

DVD-R

DVD+RW

This involves a function available on recorded DVD+RW or DVD-RW(V)/DVD-R/+R

discs that have been recorded and finalized.

�

DVD+R

Audio CD

This involves a function available on an audio CD-RW/-R (CD-DA format).

�

MP3

This involves a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a

WMA

USB storage media containing MP3 or WMA contents.

This involves a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a

USB storage media containing JPEG contents.

JPEG

DivX

MKV

MP4

This involves a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a

USB storage media containing DivX, MKV, MP4 contents.

�

NOTE

✎

The player may not play certain CD-RW/-R and DVD-R due to the disc type or recording conditions.

If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.

▪

If contents which are consisting of more than 10 Mbps bit-rate have been recorded in DVD-R, it is not supported.

If contents which are consisting of more than 30 Mbps bit-rate have been recorded in BD-R or USB, it is not supported.

Disc types that cannot be played

•

HD DVD

•

DVD-RAM

•

DVD-RW(VR mode)

•

3.9 GB DVD-R Disc for

Authoring.

DVD-ROM/PD/MV-

Disc, etc

Super Audio CD

(except CD layer)

CVD/CD-ROM/CDV/

CD-G/CD-I/LD

(CD-Gs play audio only,

not graphics.)

English

NOTE

✎

Disc Types

Some commercial discs and DVD discs purchased

▪

outside your region may not be playable with this

player. When these discs are played, either “This

disc can not be played.” or “Cannot read this disc.

Please check the regional code of the disc.” will be

displayed.

BD-ROM

This Blu-ray disc can only be played back.

This player can play back pre-recorded

commercial BD-ROM discs.

Playback may not work for some types of discs, or

when specific operations, such as angle change and

aspect ratio adjustment, are being performed.

Information about the discs is written in detail on the

disc box. Please refer to this if necessary.

▪

BD-RE/-R

This Blu-ray disc can be recorded and played

back.

This player can play back a BD-RE/-R disc

recorded by other compatible Blu-ray disc

recorders.

Do not allow the disc to become dirty or scratched.

Fingerprints, dirt, dust, scratches or deposits of

cigarette smoke on the recording surface may make

it impossible to use the disc for playback.

DVD-VIDEO

Discs with PAL programs recorded on them cannot

▪

•

This player can play back pre-recorded

commercial DVD discs (DVD-VIDEO discs) with

movies.

be played using this player.

This player is compatible with the NTSC color system

only.

•

When switching from the first layer to the

second layer of a dual-layered DVD-VIDEO disc,

there may be momentary distortion in the image

and sound. This is not a malfunction of the

player.

When a BD-J title is played, loading may take longer

than a normal title, or some functions may perform

slowly.

This player may not respond to all operating

commands because some Blu-ray, DVD and CD

discs allow specific or limited operation and features

during playback.

▪

DVD-RW

This player can play back a DVD-RW disc

recorded and finalized with a DVD video recorder.

Ability to play back may depend on recording

conditions.

Please note that this is not a defect in the player.

Samsung cannot assure that this player will play

every disc bearing the Blu-ray Disc, DVD or CD logo

because disc formats evolve, and problems and

errors may occur during the creation of Blu-ray Disc,

DVD, CD software and/or the manufacture of discs.

Please contact the SAMSUNG customer care center

if you have questions or encounter difficulty when

playing Blu-ray, DVD, or CD discs in this player.

Also, refer to rest of this user manual for additional

information on playback restrictions.

▪

DVD-R

This player can play back a DVD-R disc recorded

and finalized with a DVD Video recorder. Ability to

play back may depend on recording conditions.

DVD+RW

•

This player can play back a DVD+RW disc

recorded with a DVD Video recorder. Ability to

play back may depend on recording conditions.

Blu-ray Disc Compatibility

Blu-ray Disc is a new and evolving format.

Accordingly, disc compatibility issues are possible.

Not all discs are compatible and not every disc will

play back. For additional information, refer to the

Compliance and Compatibility Notice section of

this user manual.

English

Getting Started

DVD+R

AVCHD (Advanced Video Codec High

Definition)

•

This player can play back a DVD+R disc

recorded and finalized with a DVD Video

recorder. Ability to play back may depend on

recording conditions.

•

This player can playback AVCHD format discs.

These discs are normally recorded and used in

camcorders.

•

The AVCHD format is a high definition digital

video camera format.

Audio CD (CD-DA)

The MPEG-4 AVC/H.264 format is capable of

compressing images at higher efficiency than

that of the conventional image compressing

format.

•

This player can play back CD-DA format audio

CD-RW/-R discs.

The player may not be able to play some

CD-RW/-R discs due to the condition of the

recording.

•

Some AVCHD discs use the “x.v.Color” format.

This player can playback AVCHD discs using

“x.v.Color” format.

CD-RW/-R

•

“x.v.Color” is a trademark of Sony Corporation.

•

Use a 700MB(80 minutes) CD-RW/-R disc.

If possible, do not use a 800MB(90 minutes) or

above disc, as the disc may not play back.

“AVCHD” and the AVCHD logo are trademarks

of Matsushita Electronic Industrial Co., Ltd. and

Sony Corporation.

•

If the CD-RW/-R disc was not recorded as a

closed session, you may experience delays

when playing back the beginning of the disc or

all recorded files may not play.

NOTE

✎

Some AVCHD format discs may not play, depending

on the recording condition.

▪

•

Some CD-RW/-R discs may not be playable

with this player, depending on the device which

was used to burn them. For contents recorded

on CD-RW/-R media from CDs for your

personal use, playability may vary depending on

contents and discs.

AVCHD format discs need to be finalized.

“x.v.Color” offers a wider color range than normal

▪

DVD camcorder discs.

Some DivX, MKV and MP4 format discs may not

play, depending on the video resolution and frame

rate condition.

1ꢀ

English

Region Code

Both the player and the discs are coded by region.

These regional codes must match in order to play

the disc. If the codes do not match, the disc will

not play.

manual may be reproduced or copied without the

prior written permission of Samsung Electronics

Co.,Ltd.

The Region Number for this player is described on

the rear panel of the player.

Region

Disc Type

Area

Code

North America, Central America,

South America, Korea, Japan,

Taiwan, Hong Kong and South

East Asia.

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

Blu-ray

India, China, Russia, Central

and South Asia.

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

DVD-VIDEO

Russia, Eastern Europe, India,

most of Africa, North Korea,

Mongolia

China

English

1ꢁ

Getting Started

Logos of Discs that can be played

Blu-ray Disc

3D Blu-ray Disc

DTS-HD Master Audio

DivX

Java

NTSC broadcast system in

BD-LIVE

Dolby TrueHD

U.S.A, Canada, Korea, Japan

Accessories

Check for the supplied accessories below.

POWER

BONUSVIEW

SOURCE

SUBTITLE

AUDIO

DISC MENU

TOOLS

TITLE MENU

POPUP

Audio/Video cable

(AC39-00073A)

Batteries for Remote Control (AAA Size)

(AC43-12002H)

INFO

RETURN

EXIT

INTERNET@ FULL SCREEN REPEAT

MUTE

VOL

AK59-00104R

User Manual

Quick Guide

Remote Control

(AK59-00104R)

(AK68-01963A)

(AK68-01855R)

1ꢂ

English

Front Panel

b c

def g

DISC TRAY

Opens to accept a disc.

REMOTE CONTROL SENSOR Detects signals from the remote control.

DISPLAY

Displays the playing status, time, etc.

Opens and closes the disc tray.

Stops disc playback.

OPEN/CLOSE BUTTON

STOP BUTTON

PLAY/PAUSE BUTTON

POWER BUTTON

Plays a disc or pauses playback.

Turns the player on and off.

A USB memory flash stick can be connected here and used as storage when

connected to BD-LIVE. It can also be used for software upgrades and MP3/JPEG/

DivX/MKV/MP4 playback.

USB HOST

NOTE

✎

Software upgrades using the USB Host jack must be performed with a USB memory flash stick only.

In disc menu of BD title, it does not operate play action by front panel's PLAY button.

▪

English

1ꢃ

Getting Started

Front Panel Display

IN DISC INDICATOR

Lights when a disc is inserted or played back.

Displays the play time and the current status.

Lights when the wireless network is connected.

CURRENT TIME AND

STATUS INDICATOR

WIFI INDICATOR

1ꢄ

English

Rear Panel

ab c

g f e

Connect the optional Wireless LAN Adapter (WIS09ABGN) here to use the Wireless

network.

WIRELESS LAN ADAPTER

Can be used for network based services (See pages 53~58), BD-LIVE and software

upgrades using a network connection.

LAN

Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal

on your TV for the best quality picture or to your Receiver for the best quality sound.

HDMI OUT

COMPONENT OUT

VIDEO OUT

Connects to equipment having component video input.

Connects the input of external equipment using a video cable.

Connects to the audio input of external equipment using audio cables.

Connects to a Receiver.

AUDIO OUT

DIGITAL AUDIO OUT

English

1ꢅ

Getting Started

Remote Control

Tour of the Remote Control

POWER

Turn the player on and off.

Turn the TV on and off.

(To operate your TV, please refer to page 19)

To open and close the disc tray.

BONUSVIEW

SOURCE

After setup, allows you to set the input

source on your TV.

Press this to use Bonusview function.

Press numeric buttons to operate options.

SUBTITLE

AUDIO

Use this to access various audio functions

on a disc (Blu-ray Disc/DVD).

Press this to switch the Blu-ray Disc/DVD’s

subtitle language.

Press to skip backwards or forwards.

Press to search a disc backwards or

forwards.

Press to stop a disc.

Use this to enter the disc menu.

Press to pause a disc.

Press to play a disc.

DISC MENU

TOOLS

TITLE MENU

POPUP

Use this to enter the popup menu/title

menu.

Press this to move to the home menu.

Press this to use Tools menu.

INFO

Use this to display the playback information

during playing a Blu-ray/DVD disc.

Select menu items and change menu value.

RETURN

EXIT

Return to the previous menu.

Press this to exit the menu.

These buttons are used both for menus

on the player and also several Blu-ray Disc

functions.

Press this to link to various Internet@TV

services.

INTERNET@ FULL SCREEN REPEAT

Press this to see the full screen on a TV.

Allows you to repeat a title, chapter, track

or disc.

MUTE

VOL

TV volume adjustment.

AK59-00104R

Use this to select a TV program.

Mutes the speakers of your TV.

Installing batteries

NOTE

✎

If the remote does not operate properly :

▪

•

Check the polarity +/– of the batteries (Dry-Cell)

Check if the batteries are drained.

Check if remote sensor is blocked by obstacles.

Check if there is any fluorescent lighting nearby.

1ꢆ

English

Setting the Remote Control

Controllable TV Codes

You can control certain functions of your TV with

this remote control.

Brand

SAMSUNG

AIWA

Code

Brand

NOBLEX

NOKIA

Code

TV POWER+66

TV POWER+74

TV POWER+01, +02,

+03, +04, +05,

Button

Function

+06, +07, +08, +09

TV POWER+72, +73,

TV POWER

Used to switch the television on and off.

NORDMENDE

PANASONIC

PHILIPS

+75

TV POWER+82

Used to select an external source

TV POWER+53, +54,

+74, +75

TV SOURCE

TV POWER+10, +11,

connected to the TV.

ANAM

+12, +13, +14,

+15, +16, +17, +18

TV POWER+06, +55,

TV VOL (+/–) Used to adjust the volume of the television.

+56, +57

BANG & OLUFSEN TV POWER+57

TV CH (

)

Used to select the desired channel.

Used to toggle the sound on and off.

, .

TV POWER+06, +56,

+57

PHONOLA

PIONEER

BLAUPUNKT

BRANDT

BRIONVEGA

CGE

TV POWER+71

TV POWER+73

TV POWER+57

TV POWER+52

TV MUTE

TV POWER+58, +59,

+73, +74

NOTE

✎

RADIOLA

TV POWER+06, +56

The functions listed above will not necessarily work

on all televisions. If you encounter problems, operate

the television directly.

▪

CONTINENTAL

RADIOMARELLI TV POWER+57

TV POWER+75

EDISON

RCA

REX

TV POWER+45, +46

TV POWER+74

TV POWER+19, +20,

+23, +24, +25,

+26, +27, +28,

+29, +30, +31,

+32, +33, +34

DAEWOO

To determine whether your television is

TV POWER+57, +72,

SABA

SALORA

SANYO

+73, +74, +75

compatible, follow the instructions below.

EMERSON

FERGUSON

TV POWER+64

TV POWER+73

TV POWER+74

1. Switch your television on.

TV POWER+41, +42,

2. Point the remote control towards the

TV POWER+06, +49,

FINLUX

+43, +44, +48

+57

television.

FORMENTI

FUJITSU

TV POWER+57

TV POWER+84

TV POWER+70

SCHNEIDER

SELECO

TV POWER+06

TV POWER+74

3. Press and hold the TV POWER button and

enter the two-figure code corresponding to

the brand of your television by pressing the

appropriate number buttons.

GRADIENTE

TV POWER+36, +37,

SHARP

+38, +39, +48

TV POWER+49, +52,

GRUNDIG

+71

If your television is compatible with the remote

control, it will switch off.

SIEMENS

SINGER

SINUDYNE

SONY

TELEAVA

TV POWER+71

TV POWER+57

TV POWER+35, +48

TV POWER+73

TV POWER+60, +72,

+73, +75

HITACHI

It is now programmed to operate with the

IMPERIAL

JVC

TV POWER+52

remote control.

TV POWER+61, +79

NOTE

✎

TV POWER+06, +19,

+20, +21, +22, +78

If several codes are listed for your television brand,

TV POWER+67, +73,

▪

TELEFUNKEN

+75, +76

LOEWE

TV POWER+06, +69

try each one in turn until you find one that works.

TV POWER+72, +73,

+75

LOEWE OPTA TV POWER+06, +57

THOMSON

If you replace the remote control’s batteries, you

▪

MAGNAVOX

METZ

TV POWER+40

TV POWER+57

must set the brand code again.

THOMSON ASIA TV POWER+80, +81

TV POWER+47, +48,

TOSHIBA

TV POWER+06, +48,

MITSUBISHI

+49, +50, +51, +52

+62, +65

MIVAR

NEC

NEWSAN

TV POWER+52, +77

TV POWER+83

TV POWER+68

WEGA

YOKO

ZENITH

TV POWER+57

TV POWER+06

TV POWER+63

English

1ꢇ

Connections

Connecting to a Tv

Case 1 : Connecting to a TV with an HDMI Cable - Best Quality

(Recommended)

1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN

terminal of your TV.

2. Turn on the player and TV.

3. Press the input selector on your TV remote control until the HDMI signal from the player appears on

your TV screen.

•

If you have set the remote control to operate your TV (See page 19), press the TV SOURCE

button on the remote control and select HDMI as the external source of the TV.

HDMI cable

(not included)

NOTE

✎

An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.

▪

If the player is connected to your TV in HDMI 720p, 1080i, 1080p output mode, you must use a High speed(category2)

HDMI cable.

HDMI outputs only a pure digital signal to the TV.

▪

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

▪

When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output

resolution will be automatically set to the highest supported by the TV.

You must have an HDMI connection to enjoy videos with 3D technology.

▪

A long HDMI cable may cause a screen noise. If this is the case, set Deep Color to Off in the menu.

ꢀ0

English

Case 2 : Connecting to a TV with DVI Cable - Best Quality

(Recommended)

1. Using an HDMI-DVI cable, connect the HDMI OUT terminal on the rear of the player to the DVI IN

terminal of your TV.

2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player

to the AUDIO IN (red and white) terminals of your TV.

3. Turn on the player and TV.

4. Press the input selector on your TV remote control until the HDMI-DVI signal from the player appears

on your TV screen.

•

If you have set the remote control to operate your TV (See page 19), press the TV SOURCE

button on the remote control and select HDMI-DVI as the external source of the TV.

HDMI-DVI cable

(not included)

Audio cable

TV monitor

Red

White

NOTE

✎

HDMI outputs only a pure digital signal to the TV. If your TV does not support HDCP (High-bandwidth Digital Content

Protection), random noise appears on the screen.

▪

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

▪

When you connect the player to the TV using the HDMI-DVI cable for the first time or to a new TV, the HDMI output

resolution will be automatically set to the highest supported by the TV.

English

ꢀ1

Connections

Case 3 : Connecting to a TV (Component) - Better Quality

Connecting to your TV using Component video cables.

You will enjoy high quality images with accurate color reproduction. Component video separates the

picture element into black and white(Y), blue(P^B) and red(P^R) signals to present clear and clean images.

(Audio signals are delivered through the audio output.)

1. Using Component video cables, connect the COMPONENT OUT terminals on the rear of the player

2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player

to the COMPONENT IN terminals of your TV.

to the AUDIO IN (red and white) terminals of your TV.

3. Turn on the player and TV.

4. Press the input selector on your TV remote control until the “COMPONENT” signal from the player

appears on the TV screen.

•

If you have set the remote control to operate your TV (See page 19), press the TV SOURCE

button on the remote control and select COMPONENT as the external source of the TV.

Component cable

(not included)

Audio cable

Red

White Red

Blue Green

NOTE

✎

Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y ” or “Cr, Cb, Y”

instead of “P^B, P^R, Y”. The number and position of terminals may vary depending on the TV set.

Please refer to the user manual of your TV.

▪

You can select from a variety of resolution settings for Blu-ray Discs such as 1080i, 720p, 480p, 480i, depending on

the disc type. (See pages 31~32)

▪

The actual resolution may differ from the setting in the setup menu if both Component and HDMI cables are connected.

The resolution may also be different depending on the disc. (See pages 31~32)

In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p, 1080i or

720p mode, the Display Setup menu will show the output resolution as 1080p, 1080i or 720p in the menu.

The resolution is actually 480i.

ꢀꢀ

English

Case 4 : Connecting to a TV (Video) - Good Quality

1. Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white)

terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of

your TV.

2. Turn on the player and TV.

3. Press the input selector on your TV remote control until the “VIDEO” signal from the player appears

on the TV screen.

•

If you have set the remote control to operate your TV (See page 19), press the TV SOURCE

button on the remote control and select VIDEO as the external source of the TV.

Audio/Video cable

Red

White Yellow

NOTE

✎

Noise may be generated if the audio cable is placed too close to the power cable.

▪

If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 24~25)

The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV.

If there is only one audio input terminal on the TV, connect it to the AUDIO OUT(right/white) terminal of the player.

CAUTION

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection

▪

systems and the picture will be distorted on the television.

English

ꢀꢁ

Connections

Connecting to an Audio System

•

Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause

damage to the speakers and your ears.

•

Please set the audio in the menu screen according to the Amplifier. (See pages 33~35)

The position of HDMI terminals may vary depending on the Amplifier. Please refer to the user manual

of your Amplifier.

Case 1 : Connecting to an Audio System (HDMI Supported Amplifier)

- Best Quality (Recommended)

1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN

terminal of your Amplifier.

2. Using an HDMI cable, connect the HDMI OUT terminal of the Amplifier to the HDMI IN terminal of

your TV.

3. Turn on the player, TV and Amplifier.

4. Press the input select button of the Amplifier to select the external input in order to hear sound from

the player. Refer to your Amplifier’s user manual to set the Amplifier’s audio input.

HDMI cable

(not included)

HDMI cable

(not included)

ꢀꢂ

English

Case 2 : Connecting to an Audio

System (Dolby Digital, DTS

Amplifier) - Better Quality

Case 3 : Connecting to an Audio

System (2 Channel Amplifier)

- Good Quality

1. Using an optical cable, connect the DIGITAL

AUDIO OUT (OPTICAL) terminal on the

rear of the player to the DIGITAL AUDIO IN

(OPTICAL) terminal of your Amplifier.

1. Using the audio cables, connect the AUDIO

OUT (red and white) terminals on the rear of

the player to the AUDIO IN (red and white)

terminals of your Amplifier.

2. Using the video signal cable(s), connect

the HDMI, COMPONENT or VIDEO OUT

terminals on the rear of the player to the

HDMI, COMPONENT or VIDEO IN terminal

of your TV. (See pages 20~23)

2. Using the video signal cable(s), connect

the HDMI, COMPONENT or VIDEO OUT

terminals on the rear of the player to the

HDMI, COMPONENT or VIDEO IN terminal

of your TV. (See pages 20~23)

3. Turn on the player, TV and Amplifier.

4. Press the input select button of the Amplifier

to select the external input in order to

hear sound from the player. Refer to your

Amplifier’s user manual to set the Amplifier’s

audio input.

4. Press the input select button of the Amplifier

to select the external input in order to

hear sound from the player. Refer to your

Amplifier’s user manual to set the Amplifier’s

audio input.

Case 2 : Optical cable

(not included)

Case 3 : Audio cable

Red

White

NOTE

✎

When following the case 2 connection, discs with PCM audio soundtracks will only be heard over the front two

channels.

▪

English

ꢀꢃ

Connections

Connecting to the Network

This player enables you to view network based services (See pages 53~58) such as Internet@TV and

BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend

using an AP (Access Point) or IP router for the connection. For more information on router connection,

refer to the user manual of the router or contact the router manufacturer for technical assistance.

Cable Network

1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the player to the LAN terminal

of your modem.

2. Set the network options. (See pages 37~41)

Router

Broadband modem

(with integrated router)

Broadband modem

Broadband

service

Broadband

service

Networking with PC for

AllShare function

(See pages 57~58)

NOTE

✎

Internet access to Samsung’s software update server may not be allowed, depending on the router you use or the ISP’s

policy. For more information, contact your ISP (Internet Service Provider).

▪

For DSL users, please use a router to make a network connection.

▪

For the AllShare function, a PC must be connected in the network as shown in the figure.

ꢀꢄ

English

Wireless Network

You can connect to network with a Wireless IP sharer.

1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless

LAN adapter to the Wireless LAN Adapter on the rear panel of the player.

2. Set the network options. (See pages 37~41)

Broadband

service

Wireless LAN Adapter

(not included)

Wireless IP sharer

Networking with PC for

AllShare function

(See pages 57~58)

NOTE

✎

Use only the Samsung wireless LAN adapter with this player. (Model name: WIS09ABGN

▪

Do not use this adapter with any other third-party players.

Please contact the retailer of this player for purchasing the wireless LAN adapter.

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the

wireless network.)

▪

Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance,

obstacles, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1) Authentication Mode : WEP, WPAPSK, WPA2PSK

▪

2) Encryption Type : WEP, AES

For the AllShare function, a PC must be connected in the network as shown in the figure.

▪

English

ꢀꢅ

Setup

5. Press the ◄► buttons to the select the

desired Network Settings: Wired, Wireless or

PBC (WPS), then press the ENTER button.

(See pages 37~40)

Before Starting (Initial Settings)

1. Turn on your TV after connecting the player.

(When the player is connected to TV for the

first time, player will turn on automatically and

the Initial Settings screen will be displayed.)

The Network Test will start and Initial Settings

will be completed.

6. Press the OK button.

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

The home menu will be displayed. (For more

information about home menu, please see

page 29)

English

Français

Deutsch

Español

Italiano

•

Home Menu

Nederlands

You Tube

Please activate Intern

int

dio

V service

to enjoy a variety of Internet Services.

> Move " Select

2. Press the ▲▼ buttons to select desired

language, then press the ENTER button.

3. Press the ENTER button to select Start

No Disc

a Change Device

d View Devices " Enter

button.

Initial Settings

NOTE

✎

TV Aspect and Network will be set.

When the player is connected to TV for the first time,

player will turn on automatically.

▪

Each setting may be changed later under "Settings"

Do not confuse because this is not malfunction.

The home menu will not be displayed if you do not

▪

configure the initial settings.

Start

If you press the BLUE(D) button during the network

setup, you can access the home menu even if the

network setup is not completed yet.

Previous " Select

When you return to home menu, the full screen

▪

4. Press the ▲▼ buttons to select the desired

TV Aspect ratio, then press the ENTER

button. (See page 31)

mode will be cancelled automatically.

If you want to display Initial Setting screen again

in order to make changes, press the STOP (

)

button on the front panel of the player for more than

Initial Settings I Network

5 seconds with no disc inserted.

Network Setting is needed to use various Internet services.

Use the HDMI cable to connect the player to an

Anynet+(HDMI-CEC)-compliant Samsung TV.

If the TV uses a language supported by the player,

that language will be set to a preferred language

automatically.

▪

Choose the primary method for connecting to network.

Wired : Set the network connection using the Ethernet cable.

Please make sure that the Ethernet cable is connected.

Wireless

PBC (WPS)

Wired

However, the Anynet+(HDMI-CEC) feature should

be set to On in both TV and the player.

Skip < Move " Select

ꢀꢆ

English

If the player is left in the stop mode more than 5

minutes without being used, a screen saver will

appear on your TV. If the player is left in the screen

saver mode for more than 25 minutes, the power

will automatically turn off.

▪

Selects the Settings.

Displays buttons available.

2. Press the ◄► buttons to select Settings,

then press the ENTER button.

3. Press the ▲▼ buttons to select the desired

Setting the Menu

submenu, then press the ENTER button.

4. Press the ▲▼ buttons to select the desired

DISC MENU

TITLE MENU

POPUP

item, then press the ENTER button.

TOOLS

INFO

5. Press the EXIT button to exit the menu.

NOTE

✎

When the player is connected to the network, select

Internet@TV from the home menu.

Download desired content from Samsung Apps.

(See page 56)

▪

RETURN

EXIT

MENU Button : Press this to move to the home menu.

The access step may differ depending on the

▪

selected menu.

RETURN Button : Return to the previous menu.

The OSD (On Screen Display) may change in this

player after upgrading the software version.

ENTER / DIRECTION Button :

Move the cursor or select an item.

Select the currently selected item.

Confirm the setting.

EXIT Button : Press this to exit the menu.

1. Press the POWER button.

The Home Menu will appear.

•

Home Menu

You Tube

Please activate Intern

int

dio

V service

to enjoy a variety of Internet Services.

No Disc

a Change Device

d View Devices " Enter

Selects the Internet@TV.

Selects the Videos.

Selects the Music.

Selects the Photos.

English

ꢀꢇ

Setup

Display

TV Screen Size

Lets you enter the actual screen size of your TV so that

the player can adjust the image according to the screen

size and display an optimal 3D image.

You can configure various display options such as

^t3^hD^{e TV Aspect, Resolution, etc.}

(The maximum allowed screen size is 116 inches for

this player.)

Select whether to play a Blu-ray Disc with 3D

contents in 3D Mode.

CAUTION

If you want to enjoy a 3D content, connect a 3D

device (3D compliant AV receiver or TV) to the

product and wear a 3D glass before playing the 3D

content.

▪

Settings

Display

Audio

While watching the 3D video, all analog component

and composite signals will be blocked automatically.

▪

System

Network

Language

Security

General

Support

3D Mode

: Auto

TV Screen Size

inch

All 3D signals are output only using the HDMI cable

and through the HDMI OUT port.

> Move " Enter ' Return

As the video resolution in 3D play mode is fixed

according to the resolution of the original 3D

video, you can not change the resolution to your

preference.

Still Mode

: Auto

Some functions such as BD Wise, or setting the

screen size or resolution may not operate properly in

3D play mode.

▪

3D Mode

•

Auto : You can choose whether to watch 3D

Blu-ray disc in 3D or 2D mode before playing

the 3D Blu-ray. It is automatically played in 2D

mode if your TV cannot support 3D contents.

You must use a high-speed HDMI cable for a proper

output of the 3D signal.

▪

Stay at least three times of the length of the screen

distant from the TV.

•

3D : The 3D Blu-ray Disc is played in 3D mode

at all times. If a TV cannot support 3D Blu-ray

discs, the playing screen can be black.

- It is recommended to place the 3D video screen

forward at eye level.

2D : The 3D Blu-ray Disc is played in 2D mode

at all times. Choose this to view a picture

without 3D effect or when a TV cannot support

3D Blu-ray discs.

If the product is connected to some 3D devices, the

3D effect may not function properly.

▪

You can not use this product for switching a 2D

content to 3D.

NOTE

✎

“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks

of Blu-ray Disc Association.

If you press the STOP(

) button once during

▪

the 3D disc playback, 3D mode option will not be

activated.

To activate 3D mode option during the 3D disc

playback, press the STOP(

) button twice.

Depending on the content and its play position,

vertical black bars could be seen on left or right or

both sides.

▪

ꢁ0

English

TV Aspect

BD Wise (Samsung Players only)

Depending on the type of television you have, you

may want to adjust the screen setting.

BD Wise is Samsung’s latest inter-connectivity

feature.

When you connect Samsung players with BD

Wise to each other via HDMI, the optimum

resolution will be set automatically.

•

16:9 Normal

Certain movies(4:3 source) will be

displayed in 4:3 Pillarbox (black

bars on sides of picture) if 16:9

normal is selected.

•

On : The original resolution of the BD/DVD disc

will be output to the TV.

Off : The output resolution will be fixed

according to the Resolution previously set,

regardless of the resolution of the disc.

16:9 Wide

NOTE

✎

You can view the full 16:9 picture

on your widescreen TV.

If you want to change the resolution in BD Wise, you

▪

must set BD Wise to Off in advance.

If you set off the BD Wise, the resolution of the

connected TV will be adjusted to its maximum

resolution automatically.

4:3 Letter Box

If the player is connected to a device that does not

support BD Wise, you can not use the BD Wise

function.

▪

Select when you want to see the

total 16:9 ratio screen a Blu-ray

Disc/DVD supplies, even though

you have a TV with a 4:3 ratio

screen. Black bars will appear at

the top and bottom of the screen.

For proper operation of BD Wise, set the BD Wise

menu of both the product and the TV to On.

Resolution

•

4:3 Pan-Scan

Sets the output resolution of the Component and

HDMI video signal.

Select when you want to see the

16:9 video supplied by the Blu-ray

Disc/DVD without the black bars

on top and bottom, even though

you have a TV with a 4:3 ratio

The number in 1080p, 1080i, 720p, 480p, 480i

indicates the number of lines of video.

The i and p indicate interlace and progressive

scan, respectively.

screen(extreme left and right portion

of the movie picture will be cut off).

•

Auto : It automatically checks and sets the

optimal resolution.

BD Wise : Automatically sets the optimal

resolution when connected via HDMI to a TV

with the BD Wise feature. (The BD Wise menu

item appears only if BD Wise is set to On.)

NOTE

✎

Depending on the disc type, some aspect ratios may

not be available.

▪

If you select an aspect ratio and option which is

different than the aspect ratio of your TV screen,

then the picture might appear to be distorted.

•

1080p : Outputs 1080 lines of progressive

video.

•

1080i : Outputs 1080 lines of interlaced video.

720p : Outputs 720 lines of progressive video.

480p : Outputs 480 lines of progressive video.

480i : Outputs 480 lines of interlaced video.

If you select the 4:3 Pan-Scan or 4:3 Letter Box, you

can’t see full screen by pressing the FULL SCREEN

button on the remote control.

▪

If you select the 16:9 Normal, 4:3 Pillarbox may

displayed.

In this case, you can’t see full screen by pressing

the FULL SCREEN button on the remote control.

English

ꢁ1

Setup

Resolution according to the output mode

•

Blu-ray Disc playback

HDMI / connected

HDMI / not connected

Output

Setup

HDMI Mode

Component/VIDEO Mode

Component Mode

VIDEO Mode

Auto

Optimal Resolution

1080p@60F

480i

1080p, Movie Frame(24Fs) off

1080p/1080i,

1080p@24F

480i

Movie Frame(24Fs) on

1080i, Movie Frame(24Fs) off

1080i

720p

480p

480i

1080i

720p

480p

480i

720p

480p

480i

•

DVD playback

HDMI / connected

HDMI / not connected

Output

Setup

HDMI Mode

Optimal Resolution

1080p@60F

1080i

Component/VIDEO Mode

Component Mode

VIDEO Mode

Auto

1080p

1080i

720p

480p

480i

480p

480i

720p

480p

NOTE

If the screen is blank, press and hold the STOP (

)

✎

▪

button on the front of the player for more than 5

If the connected TV does not support Movie Frame or

the selected resolution, the message “If no pictures

are shown after the selection, please wait for 15

seconds. And then, the resolution will be reverted to

the previous value automatically. Would you like to

make a selection?” will be displayed.

▪

seconds (no disc inserted). All settings are restored to

the factory default. Follow the steps on the previous

page to access each mode and select the Display

Setup that your TV will support.

When the factory default settings are restored, all

▪

If you select Yes and the resolution is not supported,

the TV’s screen will be blank. Please wait for 15

seconds and the resolution will be reverted to the

previous value automatically.

the user data stored in the BD data will be deleted.

The Blu-ray Disc must have the 24 frame feature in

order to use the Movie Frame (24Fs) mode.

If both HDMI and Component jacks are connected

and you are currently viewing component output,

there is a difference between resolution table and

actual resolution depending on your TV.

ꢁꢀ

English

HDMI Format

HDMI Deep Color

You can optimize the color setting from the HDMI

output.

Set to output the picture from the HDMI OUT jack

with Deep Color or not. Deep Color allows more

accurate color reproduction with deeper color

depth.

Select a connected device Type.

•

TV : Select if connected to a TV via HDMI.

HDMI.

•

Auto : The picture will be output with Deep

Color to the connected TV which supports

HDMI Deep Color.

Monitor : Select if connected to a Monitor via

•

Off : The picture will be output without Deep

Movie Frame (24Fs)

Color.

Setting the Movie Frame (24Fs) feature to On

allows you to adjust the player’s HDMI output to

24 frames per second for improved picture quality.

You can enjoy the Movie Frame (24Fs) feature only

on a TV supporting this frame rate. This menu can

only be selected in 1080i or 1080p HDMI output

resolution modes.

Audio

Digital Output

Set Digital Output depending on the connected

receiver. (For more details, please refer to the

digital output selection on the next page)

•

✎

On : Movie Frame (24Fs) functions will work.

Off : Movie Frame (24Fs) functions will not work.

•

PCM

NOTE

Bitstream(Re-encode)

If your TV does not support Movie Frame (24Fs)

function, the pop-up message will be displayed.

▪

Bitstream(Audiophile)

NOTE

✎

Be sure to select the correct Digital Output or you

will hear no sound or a loud noise.

▪

Progressive Mode

Set to improve picture quality when viewing DVDs.

If the HDMI device (Receiver, TV) is not compatible

with compressed formats (Dolby digital, DTS), the

audio signal outputs as PCM.

•

Auto : Select this to have the player

automatically set the best picture for the DVD

you’re watching.

Regular DVDs do not have BONUSVIEW audio and

▪

•

Video : Select for the best picture quality from

Navigation Sound Effects.

concert or TV show DVDs.

Some Blu-ray Discs do not have BONUSVIEW audio

and Navigation Sound Effects.

Still Mode

This Digital Output setup does not effect the analog

(L/R) audio or HDMI audio output to your TV.

It effects the optical and HDMI audio output when

connected to a receiver.

Set the type of picture shown when you pause

DVD playback.

•

Auto : Automatically set the best still picture

If you play MPEG audio soundtracks, audio signal

outputs PCM regardless of Digital Output Selections

(PCM or Bitstream).

▪

depending on the content.

Frame : Select when pausing a scene with a

little action.

Field : Select when pausing a scene with a lot

of action.

English

ꢁꢁ

Setup

Digital Output Selection

Bitstream

Setup

PCM

(Re-encode)

(Audiophile)

Connection

HDMI Receiver Optical

HDMI Receiver or Optical HDMI Receiver

Optical

PCM

Up to 7.1ch

Up to 5.1ch

PCM 2ch

DTS re-encoded

PCM

PCM 2ch

Dolby Digital

Up to 7.1ch

PCM 2ch

DTS re-encoded

Dolby Digital

Audio Stream

on Blu-ray

Disc

Plus

Dolby TrueHD Up to 7.1ch

PCM 2ch

DTS re-encoded

PCM 2ch

Dolby Digital

DTS

Dolby TrueHD Dolby Digital

DTS

Up to 6.1ch

DTS

DTS-HD HRA Up to 7.1ch

DTS-HD HRA

DTS-HD MA

PCM 2ch

Dolby Digital

DTS

DTS-HD MA

PCM

Dolby Digital

DTS

Up to 7.1ch

PCM 2ch

Up to 5.1ch

Up to 6.1ch

PCM 2ch

Dolby Digital

DTS

Audio Stream

on DVD

Decodes main feature audio Outputs only main feature audio

and BONUSVIEW audio stream stream so that your AV receiver

together into PCM audio and can decode the audio bitstream.

add Navigation Sound Effects, You will not hear BONUSVIEW

then re-encodes the PCM audio audio and Navigation Sound

Decodes main feature audio

and BONUSVIEW audio

stream together into PCM

audio and add Navigation

Sound Effects.

Definition for

Blu-ray Disc

Any

into DTS bitstream.

Effects.

Blu-ray Discs may include three audio streams.

PCM Downsampling

Main Feature Audio : The audio soundtrack of

the main feature.

Set whether to downsample 96kHz signals.

•

On : Select this when the Amplifier connected

to the player is not 96kHz compatible. 96kHz

signals will be down converted to 48kHz.

BONUSVIEW audio : Additional soundtrack

such as director or actor's commentary

Navigation Sound Effects : When you choose

some menu navigation, Navigation Sound

Effects may sounds. Navigation Sound Effects

is different on each Blu-ray Disc.

•

Off : Select this when the Amplifier connected

to the player is 96kHz compatible.

NOTE

✎

Even when PCM Downsampling is set to Off, some

discs will only output downsampled audio through

the optical digital outputs.

▪

ꢁꢂ

English

•

Cinema : Select this if you want to play

HDMI

2-channel movie sound over multi-channels.

•

If your TV is not compatible with compressed

Music : Select this if you want to play 2-channel

multi-channel formats (Dolby Digital, DTS), the

player may output PCM 2ch downmixed audio

even though you set Bitstream(either Re-encode

or Audiophile) on your setup menu.

music sound over multi-channels.

NOTE

✎

If you are using HDMI receiver, this option is

▪

•

If your TV is not compatible with PCM sampling

rates over 48kHz, the player may output 48kHz

downsampled PCM audio even though you set

available when you set Digital Output setup as PCM.

System

D^Py^Cn^Mam^Doi^wc^nsR^aman^plg^inge^toC^Oo^fn^f.trol

Initial Settings

You can listen at low volumes but still hear dialog

By using Initial Settings, you can set language, TV

aspect and Network Settings, etc.

clearly.

This is only active when a Dolby Digital signal is

detected.

For more information on the settings, refer to the

corresponding section in this user manual.

(See pages 29~43)

•

Auto : The Dynamic Range Control will be set

automatically based on the information provided

by the Dolby TrueHD Soundtrack.

Internet@TV Screen Size

•

On : When Movie soundtracks are played at low

volume or from smaller speakers, the system

can apply appropriate compression to make

low-level content more intelligible and prevent

dramatic passages from getting too loud.

Set the Internet@TV Screen to the optimal size.

•

Size 1 : Display smaller application icons, you

may see some black on sides of screen.

Size 2 : Display normal application icons, image

•

Off : You can enjoy the movie with the standard

may be too large for your TV screen.

D^Do^yw^nan^mm^ici^Rx^aiⁿn^gg^e.Mode

Size 3 : Display larger application icons, image

may be too large for your TV screen.

Set whether to downmix the multi-channel audio

into fewer channels.

Anynet+(HDMI-CEC)

Anynet+ is a convenient function that offers linked

operations with other Samsung players with the

Anynet+ feature.

•

Normal Stereo : Downmixes the multi-channel

audio into two channel stereo. Choose when

connected to equipment that does not support

virtual surround functions such as Dolby Pro

Logic.

To operate this function, connect this player to a

Samsung TV with an HDMI cable.

You can operate this player using a Samsung TV

remote control and start disc playback simply

•

Surround Compatible : Downmixes multi-

channel audio into surround compatible stereo.

Choose when connected to equipment that

supports virtual surround functions such as

by pressing the PLAY (

) button on the TV’s

remote control.

For more information, please see the TV user

D^DT^oS^lbyN^Pe^roo^L:^o6^gic.

manual.

•

On : Anynet+ functions will work.

Off : Anynet+ function will not work.

You can enjoy multi-channel sound from a simple

2-channel audio source.

•

Off : Outputs a 2-channel audio signal through

the front speakers only.

English

ꢁꢃ

Setup

NOTE

✎

Clock

This function is not available if the HDMI cable does

▪

Set time-related functions.

not support CEC.

If your Samsung TV has an n logo, then it

Settings

supports the Anynet+ function.

Display

Clock

Depending on your TV, certain HDMI output

Audio

Clock Mode

Clock Set

Time Zone

DST

: Auto

resolutions may not work.

System

Network

Language

Security

General

Support

Please refer to the user manual of your TV.

: GMT + 0:00

: Off

BD Data Management

> Move " Enter ' Return

Enables you to manage the downloaded contents

from a Blu-ray disc that supports the BD-LIVE

service.

•

Clock Mode : You can set it to Auto or

Manual.

You can check the device information including

the storage size, delete the BD data or change the

Flash memory device.

If you select Manual, the Clock Set menu will

be activated while DST will be deactivated.

•

Clock Set : You can specify the current time

Settings

and date manually.

Display

BD Data Management

Time Zone : You can specify the time zone that

Audio

Current Device

: External Memory

is applicable to your area.

System

Network

Language

Security

General

Support

Total Size

: 955MB

: 949MB

Available Size

Delete BD Data

Change Device

DST : You can set DST (Daylight Saving Time)

on or off.

: External Memory

" Select ' Return

DivX(R) Registration

View DivX(R) VOD Registration Code to purchase

and play DivX(R) VOD content.

Description of Device(Storage) Information on

the Player

Settings

•

Total Size : Total size of the Device(Storage).

Display

Initial settings

Disc Menu

Available Size : Available size of the Device

Audio

(Storage).

NOTE

System

Network

Language

Security

General

Support

Audio

DivX(R) Video On Demand

Subtitle

Your registration code is : XXXXXXXXXX

✎

To learn more visit www.divx.com/vod

In the external memory mode, disc playback will

be stopped if you disconnect the USB device in the

middle of the playback.

▪

Only those USB devices formatted in FAT file system

(DOS 8.3 volume label) are supported, and it is

recommended to use USB devices that support USB

2.0 protocol, 4 MB/sec or faster read/write speed.

NOTE

✎

This option is not activated if you select OK.

To activate this option, please activate the DivX(R)

Deactivation.

▪

The Resume Play function may not work after

▪

formatting the storage device.

The total size of BD Data Management may differ,

depending on the conditions.

ꢁꢄ

English

Wired Network

DivX(R) Deactivation

Select this to get a new registration code.

1. In the Network Settings menu, press the ▲▼

buttons to select Network Setting, and then

press the ENTER button.

Settings

The Internet Protocol Setup screen appears.

Display

Initial settings

Disc Menu

Audio

2. Press the ► button, then select Auto or

System

Network

Language

Security

General

Support

Manual, and then press the ENTER button.

Subtitle

Do you want to deactivate your device?

Setting Up a Wired Connection - Auto

Yes

1. If you selected Auto, the Network Function

acquires and fills in the values for IP Address,

Subnet Mask, etc., automatically.

NOTE

✎

This process can take up to five minutes.

NOTE

▪

✎

This function can be operated when DivX(R)

Registration function is deactivated.

▪

Settings

Network Setting

Display

Internet Protocol Setup : Auto

Audio

IP Address

Subnet Mask

Gateway

Network

System

Network

Language

To begin setting up the network connection for

DNS

: Auto

Security

General

Support

DNS Server

your player, follow these steps:

1. In the Home menu, press the ◄► buttons

to select the Settings, and then press the

ENTER button.

> Move " Select ' Return

2. Press the ▲▼ buttons to select Network, and

2. After the Network Function has acquired the

network values, press the RETURN button.

Then, run a Network Test to ensure the player

has connected to your network (See page 40).

then press the ENTER button.

3. Press the ▲▼ buttons to select Network

Settings, and then press the ENTER button.

4. Press the ▲▼ buttons to select Network

3. If the Network Function does not acquire the

network values or you selected Manual, go to

the directions for Manual Setup.

Type, and then press the ENTER button.

5. Press the ▲▼ buttons to select Wired or

Wireless, and then press the ENTER button.

6. Go to the next section.

Network Settings

Please contact your ISP to find out if your IP

address is static or dynamic. If it is dynamic, we

recommend using the Auto setting. This is the

easiest and will work in the majority of cases. If it is

static, you must use the manual set up procedure.

Directions for wired networks are below. Directions

for wireless networks are after the directions for

wired networks.

English

ꢁꢅ

Setup

Setting Up a Wired Connection - Manual

9. Press the RETURN button on your remote.

If the Auto Setting does not work, you’ll need to

10. Run a Network Test to ensure the player has

set the Network Setting values manually.

connected to your network (See page 40).

To get the Network setting values from most

Windows computers, follow these steps:

Wireless Network

1. Right click the Network icon on the bottom

You can setup the wireless network three ways:

right of the screen.

•

Using PBC (WPS)

2. In the pop-up menu, click Status.

Using the Auto Network Search function.

Manually.

3. On the dialog that appears, click the Support

tab.

Each method is described below.

4. On the Support tab, click the Details button.

Setting Up the Wireless Network Connection

The Network settings are displayed.

- PBC (WPS)

To enter the Network settings into your player,

The easiest way to set up the wireless network

connection is using the PBC (WPS) function.

If your wireless router has a PBC (WPS) button,

follow these steps:

1. On the Internet Protocol Setup screen, press

the ENTER button.

2. Press the ▲▼ buttons to select Manual, and

1. In the Network Settings menu, press the ▲▼

buttons to select Network Setting, and then

press the ENTER button.

then press the ENTER button.

3. Press the ▼ button to go to the first entry field

The Internet Protocol Setup screen appears.

(IP Address).

2. Press the RED(A) button on the remote

control.

Settings

Network Setting

Display

3. Press the PBC (WPS) button on your router

within two minutes. Your player displays the

Network Selection Screen, and automatically

acquires all the network setting values it

needs and connects to your network. When

it is done, it displays an OK button. Press the

ENTER button on your remote.

Internet Protocol Setup : Manual

Audio

IP Address

Subnet Mask

Gateway

System

Network

Language

255 255 255

DNS

: Manual

Security

General

Support

DNS Server

> Move " Select ' Return

4. After the network connection is set up, press

the RETURN button to exit the Network

Setting screen.

4. Use the number buttons on your remote to

enter numbers.

Setting Up the Wireless Network Connection

5. When done with each field, use the ► button

to move successively to the next field.

You can also use the other arrow buttons to

move up, down, and back.

- Auto Network Search

Most wireless networks have an optional security

system that requires devices that access the

network to transmit an encrypted security code

called an Access or Security Key. The Security

Key is based on a Pass Phrase, typically a word

or a series of letters and numbers of a specified

length you were asked to enter when you set up

security for your wireless network. If you use this

method of setting up the network connection, and

have a Security Key for your wireless network,

you will have to enter the Pass Phrase during the

setup process.

6. Enter the IP Address, Subnet Mask, and

Gateway values.

7. Press the ▼ button to go to DNS.

8. Press the ▼ button to go to the first DNS

entry field. Enter the numbers as above.

ꢁꢆ

English

Setting Up the Network Connection

NOTE

✎

To set up the wireless connection using Auto

You should be able to find the Pass Phrase on one of

▪

Network Search, follow these steps:

the set up screens you used to set up your router or

modem.

1. In the Network Settings menu, press the ▲▼

buttons to select Network Setting, and then

press the ENTER button.

Settings

The Internet Protocol Setup screen appears.

Security Key

Display

Network Settings

Security Key

(0)

Audio

2. Press the ▲▼ buttons to select the Internet

Protocol Setup, and then press the ENTER

button.

lid Only)

System

Network

Language

Security

General

Support

.,@

abc

jkl

def

mno

ghi

pqrs

tuv

wxyz

Delete

Done

a/A/a/

3. Press the ▲▼ buttons to select Auto or

Clear All

Space

Manual, and then press the ENTER button.

(

)

Cursor " Select ' Return

Settings

Network Setting

Display

Access Point Selection : Not Selected

Internet Protocol Setup : Auto

Audio

9. To enter the Pass Phrase, follow these

System

Network

Language

Security

general directions:

IP Address

Subnet Mask

Gateway

•

Press the number keys on your remote to

enter numbers.

DNS

: Auto

General

Support

DNS Server

•

Use the arrow keys on your remote to move

from button to button on the Security Key

screen.

PBC (WPS) > Move " Select ' Return

•

To enter letters, move to the button labeled

a/A/1/ , and then press the ENTER button.



4. If you selected Auto, press the ▲ button to

go to Access Point Selection, and then

press the ENTER button.

Each time you press the ENTER button,

you change the kind of characters you can

enter (a/A/1/ ).



The Network function searches for available

wireless networks.

•

To enter a letter, press the number button

that corresponds to the letter. Pressing the

button repeatedly changes the letter.

When done, it displays a list of the available

networks.

5. In the list of networks, press the ▲▼ buttons

to select a network, and then press the

ENTER button.

To delete the last letter or number you

entered, move to the Delete button, and

then press the ENTER button.

6. If the PIN/Security pop-up appears, go to

Step 7. If the Network Connecting Screen

appears, go to Step 11.

To clear all entered letters and numbers,

move to the Clear key, and then press the

ENTER button. You can also just press the

RED(A) button on your remote.

7. Press the ▲▼ buttons to select PIN or

Security.

10. When done, press the YELLOW(C) button

on your remote, or move to the Done button,

and then press the ENTER button.

For most home networks, you would select

Security (for Security Key).

8. On the Security screen, enter your network’s

The Network Connecting screen appears.

Pass Phrase.

11. Wait until the connection confirmation

message is displayed, and then press the

ENTER button. The Network Settings screen

reappears.

English

ꢁꢇ

Setup

12. To test the connection, press the ▼ button

to select Network Test, and then press the

ENTER button.

6. Enter the IP Address, Subnet Mask, and

Gateway values.

7. Press the ▼ to go to DNS.

8. Press the ▼ button to go to the first DNS

Setting Up the Wireless Network Connection

entry field. Enter the numbers as above.

- Manual

9. When done, press the ▲ button to return to

Access Point Selection. Select the network,

and then press the ENTER button.

If the Auto Setting does not work, you need to

enter the Network settng values manually.

To get the Network setting values from most

10. Go to Step 6 in the Automatic Wireless

procedure above, and follow the directions

from that point on.

Windows computers, follow these steps:

1. Right click the Network icon on the bottom

right of the screen.

2. In the pop-up menu, click Status.

Network Test

3. On the dialog that appears, click the Support

Use this menu to connect the wired network

or check whether your network connection is

working or not.

tab.

4. On the Support tab, click the Details button.

The Network settings are displayed.

To Enter the Network settings into your player,

Settings

follow these steps:

Display

Network Test

Audio

1. On the Internet Protocol Setup screen, press



MAC Address (00:00:00:00:00:00)

IP Address,Subnet Mask,Gateway,DNS Server

Gateway Ping

System

Network

Language

Security

General

Support

the ENTER button.

2. Press the ▲▼ buttons to select Manual, and

Internet Service Test

then press the ENTER button.

Network testing...

3. Press the ▼ button to go to the first entry field

(IP Address).

Settings

Network Setting

Display

Access Point Selection : Not Selected

Internet Protocol Setup : Manual

Audio

Network Status

System

Network

Language

Security

IP Address

Subnet Mask

Gateway

Check whether a connection to the network and

the Internet have been established.

255 255 255

DNS

: Manual

General

Support

DNS Server

PBC (WPS) > Move " Select ' Return

BD-LIVE Internet Connection

Set to allow internet connection when BD-LIVE

service is used.

4. Use the number buttons to enter numbers.

•

Allow (All) : The Internet connection will be

5. When done with each field, use the ► button

to move successively to the next field.

You can also use the other arrow buttons to

move up, down, and back.

allowed for all BD-LIVE contents.

Allow (Valid Only) : The Internet connection will

be allowed only for BD-LIVE contents containing

a valid certificate.

•

Prohibit : No Internet connection will be allowed

for any BD-LIVE content.

ꢂ0

English

NOTE

✎

Settings

What is a valid certificate?

▪

Display

Parental Rating

 Off

When the player uses BD-LIVE to send the disc data

and a request to the server to certify the disc, the

server uses the transferred data to check if the disc is

valid and sends the certificate back to the player.

Audio

Change Password

8(Adults)

System

Network

Language

Security

General

Support

The Internet connection may be restricted while you

are using BD-LIVE contents.

▪

Language

Change Password

You can select the language you prefer for home

Change the 4-digit password used to access

security functions.

menu, disc menu, etc.

•

On-Screen Menu : Select the language for the

on-screen displays.

If you forgot your password

Disc Menu : Select the language for the disc

menu displays.

1. Remove the disc.

•

Audio : Select the language for disc audio.

•

Subtitle : Select the language for disc subtitles.

2. Press and hold the STOP (

) button on the

front panel for 5 seconds or more.

NOTE

✎

All settings will revert to the factory settings.

The selected language will only appear if it is

supported on the disc.

▪

NOTE

✎

When the factory default settings are restored, all

the user data stored in the BD data will be deleted.

▪

Security

General

When you operate this menu for the first time,

password setup screen will be displayed.

Enter the desired 4-digit password using the

number buttons.

Background

Change the background theme of the menu screen.

Parental Rating

Settings

Background

Display

This function works in conjunction with Blu-ray

Disc/DVDs that have been assigned a rating,

which helps you control the types of Blu-ray Disc/

DVDs that your family watches.

Audio

Skin 1

Skin 2

Skin 3

Skin 4

Skin 5

System

Network

Language

Security

General

Support

Select the rating level you want to set.

A larger number indicates that the program is

intended for adult use only. For example, if you

select up to Level 6, discs that contain Level 7, 8

will not play.

> Move " Select ' Return

English

ꢂ1

Setup

Support

Energy Saving

You can reduce power consumption by setting

the front panel to turn off automatically when there

is no operation for 5 seconds.

Software Upgrade

This menu allows you to upgrade software

for performance improvements or additional

services. You can check the current software

version, upgrade using the internet and set the

Auto upgrade notification. If the player is properly

connected to the network by cable or wirelessly,

the player will automatically connect to Samsung’s

website each time it is turned on and download

update files if any valid upgrade exists.

•

On : The front panel will automatically turn off

Off : Energy Saving function is not used.

when there is no operation for 5 seconds.

Front Display

Change the brightness of the front panel.

•

Auto : Dim during playback.

Dim : Dim the display window.

Bright : Brighten the display window.

Settings

Display

Software Upgrade

Disc Menu

Audio

Power On/Off Sound

System

Network

Language

Security

General

Support

Audio

Current Version

: XXX-XXXXXXXXX

Subtitle

By Internet

Play a melody when the player is turned on and off.

Auto Upgrade Notiﬁcation : On

•

On : Turn Power Sound On.

" Select ' Return

•

Off : Turn Power Sound Off.

1. To select By Internet, press the ENTER

button.

A popup message will appear if an update is

available.

2. If you select Yes, the player will turn off

automatically before restarting.

(Never turn it on manually.)

3. The update progress popup will appear.

When the update is completed, the player will

turn back off automatically.

4. Press the POWER button to turn on the

player.

NOTE

✎

The Update will be completed when the player turns

off after restarting. Press the POWER button to turn

on the updated player for your use.

▪

Never turn off or on the player manually during the

update process.

Samsung Electronics shall take no legal responsibility

for player malfunction caused an unstable internet

connection or consumer negligence during software

upgrade.

▪

ꢂꢀ

English

You can also update software in any of the two

ways as follows: Software update is the same as

in the By Internet menu.

•

USB : Visit www.samsung.com/bluraysupport,

then download and store the latest software

(RUF file) into a USB flash drive. Connect

the USB flash drive to the USB port of the

player (disc tray must be empty) to update the

software, then follow the on-screen instructions.

•

CD/DVD : Visit www.samsung.com/

bluraysupport, download and write the latest

software (RUF file) onto a disc. Insert and play

the disc in the player to start the update, then

follow the on-screen instructions.

NOTE

✎

Software upgrades using the USB Host jack must be

performed with no disc inside.

▪

If you want to cancel the upgrade in the process of

downloading the upgrade data, press the ENTER

button.

When the system upgrade is done, check the

▪

software details in the software Upgrade menu.

Do not turn off the player during the System

Upgrade, as it may cause the player to not work

properly.

Software upgrades using the USB Host jack must be

▪

performed with a USB memory flash stick only.

Contact Samsung

Provide contact information for assistance with

your player.

English

ꢂꢁ

Basic Functions

Playing a Disc

Using the Disc menu/Title menu/

Popup menu

Playback

Using the Disc Menu

1. Press the OPEN/CLOSE (

) button to

open the disc tray.

2. Place a disc gently into the tray with the disc’s

1. During playback, press the DISC

label facing up.

MENU button on the remote control.

3. Press the OPEN/CLOSE (

) button to

2. Press the ▲▼◄► buttons to make

the desired selection, then press the

ENTER button.

close the disc tray.

4. Press the PLAY (

) button.

NOTE

Playback related buttons

✎

Depending on the disc, the menu items may differ

and this menu may not be available.

▪

PLAY (

STOP (

PAUSE (

)

Starts playback.

Stops playback.

Using the Title Menu

•

If pressing the button once : The

stop position will be memorized.

)

If pressing the button twice : The

stop position will be not memorized.

1. During playback, press the TITLE

)

Pauses playback.

MENU button on the remote control.

2. Press the ▲▼◄► buttons to make

the desired selection, then press the

ENTER button.

NOTE

✎

For some discs, pressing the STOP (

) button

▪

once may not memorize the resume position.

NOTE

✎

Depending on the disc, the menu items may differ

and this menu may not be available.

▪

Disc Structure

The contents of disc are usually divided as below.

Playing the Title List

•

Blu-ray Disc, DVD-VIDEO

title 1

title 2

�

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

1. During playback, press the DISC

•

Audio CD (CD-DA)

MENU or TITLE MENU button.

track 1

track 2

track 3

track 4

track 5

file 3

2. Press the ▲▼ buttons to select an

entry you want to play from Title List,

then press the ENTER button.

MP3, WMA, DivX, MKV and MP4

NOTE

folder (group) 1

folder (group) 2

✎

file 1

file 2

file 1

file 2

If your disc has the playlist, press the GREEN(B)

▪

button to go to the Playlist.

ꢂꢂ

English

Using the Popup Menu

Skipping Chapters

h�Z��

)

•

During playback, press the SKIP (

1. During playback, press the POPUP

button.

MENU button on the remote control.

If you press the SKIP (

) button, it moves to

2. Press the ▲▼◄► buttons or ENTER

the next chapter.

button to select the desired menu.

If you press the SKIP (

NOTE

✎

the beginning of the chapter. One more press

makes it move to the beginning of the previous

chapter.

Depending on the disc, the menu items may differ

and this menu may not be available.

▪

Using the Search and Skip Functions

Slow Motion Play/Step Motion Play

During play, you can search quickly through a

chapter or track, and use the skip function to

jump to the next selection.

Slow Motion Play

h�Z��

)

Searching for a Desired Scene

h�Z��

•

In pause mode, press the SEARCH (

button.

If you press the SEARCH (

) button, the

•

During playback, press the SEARCH (

)

playback speed is reduced to

button.

1/8

1/4

1/2

Each time you press the SEARCH (

)

•

To return to normal speed playback, press the

button, the playback speed will change as follows.

PLAY (

) button.

NOTE

✎

BD-ROM,

)

1 

)

2 

)

3 

BD-RE/-R,

DVD-RW/-R,

DVD+RW/+R,

DVD-VIDEO

No sound is heard during slow mode.

▪

4 

5 

6 

)

(

1 

(

2 

(

3 

4 

5 

6 

Step Motion Play

)

(

1 

)

(

2 

)

(

DivX, MKV, MP4

h�Z��

) button.

1 

2 

•

In pause mode, press the PAUSE (

•

To return to normal speed playback, press the

Each time the PAUSE (

) button is pressed,

PLAY (

) button.

a new frame will appear.

•

To return to normal speed playback, press the

NOTE

✎

PLAY (

) button.

No sound is heard during search mode.

▪

NOTE

✎

No sound is heard during step mode.

▪

English

ꢂꢃ

Basic Functions

Repeat Playback

4. Press the ENTER button at the point where

you want repeat play to stop (B).

5. To return to normal play, press the REPEAT

Repeat the Title or Chapter

button again.

6. Press the ENTER button.

h�Z�

NOTE

✎

Repeat the disc title or chapter.

If you set point (B) before 5 seconds has lapsed, the

prohibition message will appear.

▪

Depending on the disc, the Repeat function may

not be available.

1. During playback, press the REPEAT

Using the TOOLS button

button on the remote control.

During playback, you can operate disc

menu by pressing the TOOLS button.

2. Press the ▲▼ buttons to select Chapter or

Title, then press the ENTER button.

•

Tools Menu Screen

Repeat

Chapter

Tools

Title

1/1

4/21

Chapter

Playing Time

Audio

00:12:06

1/7 ENG Multi CH

3. To return to normal play, press the REPEAT

Subtitle

Angle

1/6 ENG

1/1

button again.

BONUSVIEW Video :

BONUSVIEW Audio :

Picture Setting

Off

4. Press the ▲▼ buttons to select Off, the press

0/1 Off

the ENTER button.

< Change " Enter

Repeat the Section

NOTE

✎

h�Z�

Depending on the disc, the Tools menu may differ.

▪

1. During playback, press the REPEAT

button on the remote control.

Moving to a Desired Scene Directly

h�Z�

2. Press the ▲▼ buttons to select Repeat A-B.

1. During playback, press the TOOLS button.

Repeat

Repeat A-B : Off

" Mark A

2. Press the ▲▼ buttons to select Title, Chapter

or Playing Time.

3. Enter the desired Title, Chapter or Playing

Time using the number buttons, then press

the ENTER button.

3. Press the ENTER button at the point where

you want repeat play to start (A).

ꢂꢄ

English

NOTE

✎

Selecting the Audio Language

h�Z�

You can also operate this function by

pressing the AUDIO button on the

remote control.

Depending on the Blu-ray Disc / DVD, you may be

▪

able to change the desired subtitle in the Disc Menu.

Press the DISC MENU button.

This function depends on what subtitles are encoded

on the disc and may not be available on all Blu-ray

Discs/DVDs.

▪

A Blu-ray Disc can contain up to 255 subtitle

▪

languages and a DVD up to 32.

1. During playback, press the TOOLS button.

Information about the main feature/BONUSVIEW

mode will also be displayed if the Blu-ray Disc has a

BONUSVIEW section.

2. Press the ▲▼ buttons to select Audio.

3. Press the ◄► buttons to select the desired

audio language.

This function changes both the primary and

▪

NOTE

✎

secondary subtitles at the same time.

The ◄► indicator will not be displayed on the

screen if the BONUSVIEW section does not contain

any BONUSVIEW audio settings.

▪

The total number of subtitles is the sum of the

primary and secondary ones.

If you press the SUBTITLE button on the remote

Information about the main feature/BONUSVIEW

mode will also be displayed if the Blu-ray Disc has a

BONUSVIEW section.

control, the subtitle bar will be displayed.

Press the RETURN button to remove the subtitle bar.

Use the ◄► button to switch between main feature

and BONUSVIEW audio modes.

Changing the Camera Angle

This function depends on what audio languages are

▪

encoded on the disc and may not be available.

A Blu-ray Disc can contain up to 32 audio languages

and a DVD up to 8.

When a Blu-ray Disc/DVD contains multiple angles

of a particular scene, you can use the ANGLE

function.

Some Blu-ray Discs may allow you to select either

the multi-channel LPCM or Dolby digital audio

soundtrack in English.

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Angle.

If you press the AUDIO button on the remote control,

▪

3. Press the ◄► buttons to select the desired

Audio bar will be displayed.

Angle.

Press the RETURN button to remove the Audio bar.

Selecting the Picture Setting

Selecting the Subtitle Language

hZ�

You can also operate this function by

pressing the SUBTITLE button on the

remote control.

h�Z�

This function enables you to adjust video quality

when you are connected to a TV via HDMI.

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Picture Setting,

then press the ENTER button.

1. During playback, press the TOOLS button.

3. Press the ◄► buttons to select the desired

2. Press the ▲▼ buttons to select Subtitle.

Picture Setting, then press the ENTER button.

3. Press the ◄► buttons to select the desired

subtitle language.

English

ꢂꢅ

Basic Functions

•

Dynamic : Choose this setting to increase

Listening to Music

Sharpness.

Normal : Choose this setting for most

o�

viewing applications.

Buttons on the Remote Control

Movie : This is the best setting for watching

movies.

used for Music Playback

User : The user can adjust the sharpness

and noise reduction function respectively.

Setting BONUSVIEW

SUBTITLE

AUDIO

The BONUSVIEW feature allows you to view

additional content (such as commentaries) in a

small screen window while the movie is playing.

This function is only available if the disc has the

bonusview feature.

TOOLS

INFO

EXIT

You can also operate this function by

pressing the BONUSVIEW button on

the remote control.

RETURN

1. During playback, press the TOOLS button.

INTERNET@ FULL SCREEN REPEAT

2. Press the ▲▼ buttons to select BONUSVIEW

Video or BONUSVIEW Audio.

SEARCH buttons : Fast Play.

3. Press the ◄► buttons to select the desired

(Audio CD (CD-DA) only)

bonusview.

NOTE

PAUSE button : Pauses playback.

✎

If you switch from BONUSVIEW Video, BONUSVIEW

Audio will change automatically in accordance with

BONUSVIEW Video.

▪

PLAY button : Plays the currently selected track.

▲▼ buttons : Selects a track in the Music List or

Playlist.

Tools

YELLOW(C) button : Select or deselect a track in

BONUSVIEW Video <

BONUSVIEW Audio :

Picture Setting

Off

0/1 Off

the music list.

< Change " Enter

REPEAT button : Selects the play mode in the

Playlist.

ENTER button : Plays and pauses the selected

track.

◄► buttons : Jump Play.

(except for Audio CD (CD-DA))

STOP button : Stops a track.

SKIP button : During playback, moves to the next

page in the Music List or moves to the next track in

the Playlist.

ꢂꢆ

English

SKIP button : During playback, moves to the

previous page in the Music List or moves to the

previous track in the Playlist.

Shows the current play time/total play time.

Displays the current playback status

Displays the repeated playback status.

If you press this button after three seconds of

playback in the Playlist, the current track will be

replayed from the beginning. But, if you press this

button within three seconds after playback starts in

the Playlist, the previous track will be played.

2. Press the ▲▼ buttons to select the track

you want to play, and then press the ENTER

button.

NUMBER buttons : During the Playlist playback,

press the desired track number. The selected track

will be played.

Repeat an Audio CD (CD-DA)/MP3

1. During the Playlist playback, press the

REPEAT button.

2. Select the desired play mode by

Playing an Audio CD (CD-DA)/MP3

pressing the REPEAT button repeatedly.

1. Insert an Audio CD (CD-DA) or an MP3 Disc

Tracks on a disc are

into the disc tray.

Audio CD

played in the order in

•

For an Audio CD (CD-DA), the first track will

Off

(CD-DA)/MP3 which they were recorded

be played automatically.

on the disc.

•

For an MP3 disc, press the ◄► buttons

to select Music, then press the ENTER

button.

Audio CD

(

) Track

) One

) All

Current track is repeated.

(CD-DA)

MP3

Current track is repeated.

All tracks are repeated.

Audio CD (CD-DA)/MP3 Screen Elements

Audio CD

(CD-DA)/MP3

The random option plays

a disc’s track in random

order.

Audio CD

Playlist

1/6

(

) Shuffle

TRACK 001

(CD-DA)/MP3

TRACK 001

TRACK 002

TRACK 003

TRACK 004

TRACK 005

TRACK 006

05:57

04:27

04:07

03:41

03:17

Playlist

00:08 / 05:57

1. Insert an Audio CD (CD-DA) or an MP3 Disc

03:35

Return

into the disc tray.

Pause

Tools

•

For an Audio CD (CD-DA), the first track will

be played automatically.

•

For an MP3 disc, press the ◄► buttons

to select Music, then press the ENTER

button.

Displays the music information.

Displays the playlist.

2. To move to the Music List, press the STOP (

)

or RETURN button.

The Music List screen is displayed.

Display the current track/total tracks.

Displays buttons available.

English

ꢂꢇ

Basic Functions

3. Press the ▲▼◄► buttons to move desired

track, then press the YELLOW(C) button to

check desired tracks.

Playing back a Picture

Repeat this procedure to select additional

tracks.

Playing a JPEG Disc

Music TRACK 003

3 ﬁles selected 1/2 Page

1. Insert a JPEG disc into the disc tray.

TRACK 001

TRACK 002

2. Press the ◄► buttons to select the Photos,

00:05:57

00:04:27

TRACK 003

00:04:07

TRACK 004

and then press the ENTER button.

00:03:41

TRACK 005

TRACK 006

00:03:35

3. Press the ▲▼◄► buttons to select the folder

you want to play, and then press the ENTER

button.

00:03:17

TRACK 007

00:03:47

TRACK 008

00:03:49

TRACK 009

TRACK 010

00:03:45

00:03:53

4. Press the ▲▼◄► buttons to select the photo

you want to play, and then press the ENTER

button.

()

Select

Jump page ' Return

CDDA

The Slide Show starts automatically.

4. If there is an undesired track in the playlist,

press the YELLOW(C) button again.

The selected track will be deleted.

NOTE

✎

You can’t enlarge the subtitle and PG graphic in the

full screen mode.

▪

5. Press the ENTER button to play the selected

tracks.

Selected tract will automatically play.

Using the TOOLS button

Playlist

1/3

TRACK 001

TRACK 002

TRACK 003

During the slide show playback, you

can use various function by pressing the

TOOLS button.

05:57

04:27

04:07

00:08 / 05:57

Tools

Stop Slide Show

Slide Show Speed :

Background Music

Zoom

Normal

Pause

Tools

Return

Rotate

Information

6. To go to the Music List, press the STOP (

)

>Move "Enter 'Return

or RETURN button.

7. To go to the Playlist, press the ENTER

button.

NOTE

✎

•

Stop Slide Show : Select this if you want to

stop the slide show.

You can create a playlist with up to 99 tracks on

Audio CD (CD-DA).

▪

Slide Show Speed : Select this if you want to

adjust the Slide Show speed.

Background Music : Select this if you want to

listen to music while viewing a picture.

ꢃ0

English

•

Zoom : Select this if you want to enlarge the

5. Press the ▲▼ buttons to select the USB,

current picture. (Enlarged up to 4 times)

then press the ENTER button.

Rotate : Select this if you to rotate the picture.

(This will rotate the picture either clockwise or

counter clockwise.)

6. Press the ◄► buttons to select the desired

Videos, Music or Photos, then press the

ENTER button.

•

Information : Shows the picture information

-1

4 . Press the BLUE(D) button.

including the name and size, etc.

NOTE

✎

Please activate Internet@TV service

to enjoy a variety of Internet Services.

To enable the Background Music function, both

music and MP3 files must be contained in the same

folder. However, the sound quality can be affected

by the bit rate of the MP3 file, the size of the photo

and the encoding method.

▪

USB

d Home " Enter

Playing back a USB Storage Device

-1

5 . Press the ◄► buttons to select the USB,

You can use the USB connection to play multimedia

files (MP3, JPEG, DivX, etc) downloaded from the

USB storage device.

then press the ENTER button.

-1

6 . Press the ▲▼ buttons to select the desired

Videos, Music or Photos, then press the

1. Move to the home menu.

ENTER button.

2. In Stop mode, connect the USB storage

device to the USB port on the front panel of

the player.

7. For playing back Video, Music or Photo files,

refer to pages 48~51.

The message “Do you want to access the

NOTE

✎

device?” will be displayed.

You must remove the USB storage device safely

(by performing the “Safe to Remove USB” function)

in order to prevent a possible damage to the USB

memory. Press the MENU button to move to the

home menu, and select the YELLOW(C) button and

press the ENTER button.

▪

3. Press the ◄► button to select Yes, then

press the ENTER button.

4. Press the RED(A) button.

You Tube

Please activate Intern

int

dio

V service

When the Audio-CD (CD-DA), MP3 and JPEG files are

in stop mode, you can’t see full screen by pressing

the FULL SCREEN button on the remote control.

▪

to enjoy a variety of Internet Services.

If you insert the disc when playing USB storage

device, the device mode is changed to “DVD or CD”

automatically.

USB

USB a Change Device

Safely Remove USB

View Devices " Enter

English

ꢃ1

Basic Functions

Notes on USB connection

•

Supported devices: USB storage media, MP3 player, digital camera, USB card reader

Does not support if a folder or file name is longer than 128 characters.

A certain USB/digital camera device may not be compatible with the product.

FAT16, FAT32 and NTFS file systems are supported.

Connect directly to the product's USB port. Connecting through another cable may raise problems

with USB compatibility.

•

Inserting more than one memory device to a multi-card reader may not operate properly.

PTP protocol is not supported.

Do not disconnect USB device during a "loading" process.

Bigger the image resolution, the longer the delay to displaying.

DRM applied MP3 files downloaded from a commercial site are not played back.

External HDD device is not supported.

Supported file formats

video File Support

File Extension

Container

Video Codec

Audio Codec

Resolution

MP3

AC3

1920x1080

DivX 3.11/4.x/5.1/6.0

XviD

*.avi

DTS

AVI

MP4v3

WMA

1920x1080

H.264 BP/MP/HP

PCM

1920x1080

VC-1 AP

DivX 5.1/6.0

XviD

MP3

AC3

DTS

*.mkv

MKV

H.264 BP/MP/HP

VC-1 AP

*.wmv

*.mp4

WMA

AAC

WMV (wmv9)

MP4

VC-1 SM

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1

MP1, 2

*.mpg

AC3

MPEG2

*.mpeg

DTS

H.264 BP/MP/HP

Music File Support

File Extension

*.mp3

Container

Audio Codec

Support Range

MP3

Compliant with WMA version 10

*.wma

WMA

* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48

* Bit rates - All bit-rates in the range 5kbps to 384kbps

WMA

ꢃꢀ

English

Network Services

You can enjoy various network services such as

Internet@TV or BD-LIVE by connecting the player

to the network system.

4. When you have agreed on the service

agreement, the Internet@TV service will start

being updated. It takes several minutes.

When the update is completed, you will see

the Internet@TV menu screen.

Check the following instructions before using

any network service.

Internet@TV at a Glance

1. Connect the player to the network.

(See pages 26~27)

2. Configure the network settings.

(See pages 37~41)

Recommended

My Applications

Using Internet@Tv

by Date 1/3

Connect this player to the network to download

various for a fee or free-of-charge applications.

Internet@TV brings useful and entertaining content

and services directly from the web to your player

such as news, weather forecasts, stock market

quotes, games, movies and music.

Samsung Apps Settings

Mark as Favourite

Sort by ' Return

You can also operate this function by

pressing the INTERNET@ button on

the remote control.

Commercial : Displays Internet@TV Guide, product

introduction and new application introduction.

Recommended : Displays recommended contents

Getting Started with Internet@TV

managed by Samsung.

1. Move to the home menu.

My Applications : Displays your personal gallery

which can be added and deleted by you.

Navigation Help : Displays remote control buttons

You Tube

Please activate Intern

int

dio

V service

to enjoy a variety of Internet Services.

available.

•

RED(A) : To log in to Internet@TV.

GREEN(B) : To mark the application as a favorite.

BLUE(D) : To sort the applications.

Return : To return to the previous menu.

Settings : You can set the system setup and create

No Disc

a Change Device

d View Devices " Enter

accounts, etc.

Samsung Apps : You can download various

2. Press the ◄► buttons to select Internet@TV

chargeable or free-of-charge application services.

and press the ENTER button.

3. In the start screen of the Internet@TV service,

you will see the service agreement screen.

You should agree to the service terms and

conditions before you can use the Internet@

TV service.

English

ꢃꢁ

Network Services

12. Press buttons on the remote to input the rest

Using the Keypad

of ‘Challenger Rd., Ridgefield Park NJ’.

Through your remote, you can use the On-Screen

Keypad in several Internet@TV applications to enter

text.

13. Press the ENTER button.

14. The map and address appear on the screen.

Pressing the SUBTITLE button on the remote while

you are using the Screen Keypad lets you change

the text fields to lower case, upper case, numbers

and icons.

NOTE

✎

Samsung Electronics shall take no legal responsibility

for any interruption of the Internet@TV service

caused by the service provider for any reasons.

▪

The Internet@TV service is to download and process

data via the Internet so that you can enjoy the

contents on the TV screen.

abc

jkl

tuv

def

mno

wxyz

ghi

pqrs

If the Internet connection is unstable, the service

may be delayed or interrupted.

Input Mode

Delete

Furthermore, the player may be turned off automatically.

If this is the case, check the Internet connection and

try again.



The application service may be provided in English

only and the contents available may vary, depending

on the area.

▪

For example, here is how to search an address in

Google Maps:

When using a application service, you can not

1. Press the ENTER button on the remote at the

▪

operate FULL SCREEN button on the remote control.

Google Maps icon at the Internet@TV.

For more information about the Internet@TV service,

visit the web site of the applicable service provider.

2. Press GREEN(B) button to use the SEARCH

function.

The provided services are subject to change,

3. Press the ◄► buttons to move to the “Search

depending on the Internet@TV service provider.

or address” window.

The Internet@TV service contents may differ

according to the firmware version.

4. Press the ENTER button to use Search or

address function.

For-a-fee DivX contents with copy protection can

5. For example, suppose that you want to input

only be played using HDMI cable.

‘105 Challenger Rd., Ridgefield Park NJ’.

If you have connected your player to your TV using

Component or video cables, the DivX video signal

can not output or the popup message “Connect

with a HDMI cable to play this file.” or “Cannot play

current file.” will be displayed.

6. Press the SUBTITLE button on the remote

twice to change the input mode from lower

case to numbers.

7. Press ‘1’, ‘0’, ‘5’.

8. Press the YELLOW(C) button on the remote

to input a blank space.

9. Press the SUBTITLE button on the remote

3 times to change the input mode from

numbers to upper case.

10. Press ‘2’ button on the remote 3 times to

input C.

11. Press the SUBTITLE button on the remote 3

times to change the input mode from upper

case to lower case.

ꢃꢂ

English

Account Login

System Setup

For a more enjoyable application experience,

Reset

To do this, you must create an account first.

(For instructions on creating an account, refer to

Internet@TV ID on this page)

Resets Internet@TV settings to factory default

settings.

1. Press the ▲▼◄► buttons to select the

desired application and press the RED(A)

button.

NOTE

✎

If you forgot your password, press the STOP (

)

▪

button on the front panel of the player for more than

5 seconds with no disc inserted.

Recommended

Internet@TV ID

My Applications

by Date 1/3

Use this menu to create or delete an account and

enter or delete account information.

User account :

aaa

Password :

You can control your account including contents

site’s account information.

Create [0~9] Enter PIN ' Cancel

This account is only for Internet@TV.

Samsung Apps Settings

Mark as Favourite

Sort by ' Return

Create

Create an account and link it with desired service

applications.

2. Enter the user account and password.

Settings

NOTE

✎

Create IDs and configure Internet@TV settings

from this screen.

The account name must be at least 1 character in

length but no more than 8.

▪

You can register up to 10 User Account Names.

Settings

Manager

. System setup

. Internet@TV ID

. Service Manager

. Properties

Change the Service Lock password

Reset

•

Service Site : Register login information for

service sites.

Change Password : Change account

password.

Delete : Delete the account.

' Return

English

ꢃꢃ

Network Services

Using the color buttons with the Samsung

Apps

Service Manager

Delete and lock applications installed to Internet@

•

RED(A) (Login) : To log in to the internet

TV.

service.

GREEN(B) (Thumbnail View) : To change the

Lock

view mode.

Lock the application. Accessing a locked

application requires the password.

BLUE(D) (Sort By) : To sort the applications by

Featured, Most Downloaded, Most Recent or

Name.

Delete

Delete the application.

Internet@TV Services Available

•

YouTube/Pandora/Netflix/Blockbuster/USA

Today News

Properties

Display information about Internet@TV. Use the

“Check the speed of your internet connection”

option to test your network connection.

Blockbuster : You can view movies streamed

by Blockbuster.

YouTube : You can view video streamed by

YouTube.

Samsung Apps

Netflix : You can view movies streamed by

Netflix.

Various applications are available from here,

organized into different categories. Some

applications have a download fee.

Pandora : You can listen to Internet radio.

USA Today News : You can read news

streamed by USA Today News.

Samsung Apps

Video

1/1

Name

AccuWeather : You can view weather

information by AccuWeather.

Featured

Most downloaded

Most recent



What's New?



Video

YouTube

NOTE

Free

✎



Game

TV store Test User002



Sports

The available Internet contents services may be

added or deleted.

▪



Lifestyle



Information



Other

My page

Help

Thumbnail View

Sort By ' Return

My page

Displays the application list.

Help

If you questions about Internet@TV, check this

section first. If none of the tips apply, please visit

the help website.

ꢃꢄ

English

BD-LIvE™

Using the AllShare Function

Once the player is connected to the network, you

can enjoy various movie-related service contents

using a BD-LIVE compliant disc.

AllShare enables you to play music, video and

photo files in your PC using the player.

To use AllShare, you must connect the player to

your PC via the network (See pages 26~27) and

install the SAMSUNG PC Share Manager on the

PC.

1. Check the size of the remaining memory.

The memory device must have at least 1GB

of free space to accommodate the BD-LIVE

services.

1. Visit the Samsung website at www.samsung.

com.

2. Insert a Blu-ray disc that supports BD-LIVE.

2. Download the SAMSUNG PC Share Manager

3. Select an item from various BD-LIVE service

and install it on the PC.

contents provided by the disc manufacturer.

3. When the installation is completed, you will

see the SAMSUNG PC Share Manager icon

on your desktop.

NOTE

✎

The way you use BD-LIVE and the provided contents

may differ, depending on the disc manufacturer.

▪

Double-click the icon to launch the application.

Application Program at a Glance

Software Upgrade Notification

In network connection, the player will notice you of

any new software version with a popup message.

SAMSUNG PC Share Manager

File Share Server Help

1. Turn on the player.

Server : PC Share Manager

2 3 4 5

2. From the Software Upgrade menu, set Auto

Upgrade Notification to On. (See page 42)

If there is a new software version available, the

player will notice you with a popup message.

My Computer

Shared Folder

C: Document and settings Admin

Folder

Full Path

Folder 1

C: Document and settin..

Name

Size

Kind

Folder 1

File

Folder 2

Folder 3

File

3. To upgrade the firmware, select Yes.

It will turn off automatically before restarting.

(Never turn it on manually.)

4. The update progress popup will appear.

When the update is completed, it will turn

back off automatically.

5. Press the POWER button to turn on the

Menu Bar

player.

Share Folder Enabled icon : Use this if you want to

NOTE

✎

select a folder in your PC to share.

Update will be completed when the player turns off

after restarting. Press the POWER button to turn on

the updated player for your use.

▪

Share Folder Disabled icon : Use this if you want

to set folder sharing off.

Refresh icon : Use this if you want to refresh list of

Never turn off or on the player manually during the

update process.

folders and files in My Computer.

Samsung Electronics shall take no legal responsibility

for player malfunction caused by unstable of internet

connection or consumer negligence during software

upgrade.

Set Change State icon : Select a folder to share

▪

and don’t forget to press this button.

The updated state will be applied to the server.

Server : Displays the name of the sharing server.

English

ꢃꢅ

Network Services

NOTE

✎

Shared Folder : Displays a list of the shared folders.

Depending on the performance of the external

▪

My Computer : Displays a list of the folders and

modem or router, HD video may not play properly.

files in the PC.

If your system uses a firewall, the player may not

locate your PC on the TV screen.

4. Select a folder to share from the My computer

pane, and click the Share Folder Enabled

icon ( ).

AllShare does not support the following functions.

The Background Music and Background Music

Setting functions.

(To remove a shared folder : Select a folder to

remove from the shared folders, and click the

Share Folder Disabled icon ( ).)

Sorting files by preference in the Photo, Music,

and Movie folders.

5. To apply the updated sharing state to the

The Change Group function.

The Safe Remove function.

server, click the Set Change State icon ( ).

The Sorting method may differ depending on the

6. To enable the player to locate a PC server,

click Share from the menu bar.

▪

sever function.

Click Set Device Policy and click Accept.

The search and skip operation may differ depending

on the sever function.

SAMSUNG PC Share Manager

File Share Server Help

If you press the STOP (

) button during video

Server : PC Share Manager

Set Device Policy

playback, stop position will be memorized and it will

be memorized only end user’s operation.

But stop position will not be memorized depending

on the sever function.

My Computer

Shared Folder

Delete

Item

C: Document and settings Admin

Folder

Full Path

Device

State

S^Se^et^leS^ct^ta^edte

Folder 1

C: Document and settin..

Name

Size

Kind

XXX.XXX.X.XX

SAMSUNG Blu-ray Disc Player Deny

File

Folder 1

Folder 2

Folder 3

File

During video playback, play time will not display.

▪

Cancel

To use AllShare function, please locate both this

player and PC in same subnet.

7. Click the Set Change State icon ( ) and

move to the home menu on player.

8. To select a device, use the RED(A) or BLUE(D)

button to select a file to play.

(For playing back Video, Music or Photos files,

see pages 48~51.)

You Tube

Please activate Intern

int

dio

V service

to enjoy a variety of Internet Services.

No Disc

a Change Device

d View Devices " Enter

ꢃꢆ

English

Appendix

Troubleshooting

Before requesting service, please check the following.

PROBLEM

SOLUTION

No operation can be performed with the

•

Check the batteries in the remote control. They may need replacing.

Operate the remote control at a distance of no more than 20 feet.

remote control.

Remove batteries and hold down one or more buttons for several minutes

to drain the microprocessor inside the remote control to reset it. Reinstall

batteries and try to operate the remote control again.

Disc does not play.

•

Ensure that the disc is installed with the label side facing up.

Check the region number of the Blu-ray Disc/DVD.

Disc Menu does not appear.

•

Ensure that the disc has disc menus.

The prohibition message appears on the

screen.

•

This message appears when an invalid button is pressed.

The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles)

You’ve requested a title or chapter number or search time that is out of

range.

Play mode differs from the Setup Menu

selection.

•

Some of the functions selected in the Setup Menu may not work properly if

the disc is not encoded with the corresponding function.

The screen ratio cannot be changed.

•

The Screen Ratio is ﬁxed on your Blu-ray Disc/DVDs.

This is not a problem with the player.

No audio.

•

Make sure you have selected the correct Digital Output in the Audio Options

Menu.

The screen is blocked

•

If the HDMI output is set to a resolution your TV cannot support (for

example, 1080p), you may not see a picture on your TV.

Press the STOP (

) button (on front panel) for more than 5 seconds with

no disc inside. All settings will revert to the factory settings.

When the factory default settings are restored, all the user data stored in

the BD data will be deleted.

English

ꢃꢇ

Appendix

PROBLEM

SOLUTION

Forgot password

•

Press the STOP (

) button (on front panel) for more than 5 seconds with

no disc inside. All settings including the password will revert to the factory

settings.

Don’t use this unless absolutely necessary.

•

When the factory default settings are restored, all the user data stored in

the BD data will be deleted.

If you experience other problems.

Go to the contents and ﬁnd the section of the user manual that contains the

explanations regarding the current problem, and follow the procedure once

again.

•

If the problem still cannot be solved, please contact your nearest Samsung

authorized service center.

The picture is noisy or distorted

No HDMI output.

•

Make sure that the disc is not dirty or scratched.

Clean the disc.

•

Check the connection between the TV and the HDMI jack of the player.

Check if your TV supports 480p, 720p, 1080i, 1080p HDMI input resolution.

Abnormal HDMI output screen.

•

If random noise appears on the screen, it means that TV does not support

HDCP (High-bandwidth Digital Content Protection).

PC Share Manager function

I can see folders shared through the PC

•

Since it shows only ﬁles corresponding to the Image, Music, and Movie

categories, ﬁles that do not correspond to these categories may not be

displayed.

Share Manager, but I cannot see the files.

AllShare function

Video is played intermittently.

•

Check if the network is stable.

Check if the network cable is properly connected and if the network is not

overloaded.

•

Wireless connection between the server and the player is unstable.

Check the connection.

AllShare connection between TV and PC is

unstable.

•

IP address under the same subnetwork should be unique, otherwise IP

collision can results in such a phenomenon.

Check if you have a ﬁrewall enabled.

If so, disable the ﬁrewall function.

ꢄ0

English

PROBLEM

BD-LIVE

SOLUTION

I cannot connect to the BD-LIVE server.

•

Check whether the network connection is successful or not by using

Network Test menu. (See page 40)

Check whether the USB memory device is connected with player

or not.

The memory device must have at least 1GB of free space to accommodate

the BD-LIVE service.

You can check the available size in BD Data Management. (See page 36)

•

Please check whether the BD-LIVE Internet Connection menu is set to

Allow(All).

If all above fails, contact the contents provider or update the latest

ﬁrmware.

When using the BD-LIVE service, an error

occurs.

•

The memory device must have at least 1GB of free space to accommodate

the BD-LIVE service.

You can check the available size in BD Data Management. (See page 36)

NOTE

✎

When the factory default settings are restored, all the user data stored in the BD data will be deleted.

▪

Viewing using 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.

Read and understand the following safety information before using the 3D function.

•

Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and

headaches.

If you experience any such symptom, stop viewing 3D TV, remove 3D Active Glasses and rest.

•

Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop

viewing 3D TV, remove your 3D Active Glasses and rest.

A responsible adult should frequently check on children who are using the 3D function. If there are any

reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses,

protective goggles, etc.)

Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D

function or 3D Active Glasses while moving around may result in injuries due to running into objects,

tripping, and/or falling.

English

ꢄ1

Appendix

Index

JPEG

TV Aspect

Title Menu

Tools Menu

Accessories

Ad-hoc

46~51

Anynet+ (HDMI-CEC)

Audio Language

AllShare

Movie Frame (24F)

MP3

57~58

49~50

USB Storage Device

BD Wise

Network Setup

37~40

31~32

BD Data Management

BD-LIVE

Wireless Network

27, 38

40, 57

Wireless LAN Adapter

BONUSVIEW

Background Music

Optimal Resolution

Zoom

PCM Downsampling

Popup Menu

Component

Cable Network

Camera Angle

Picture Setting

47~48

Region Code

Romote Control Sensor

Romote Control

Resolution

Digital Output

33~34

Dynamic Range Control

Downmixing Mode

DTS Neo:6

Repeat

46, 49

DST (Daylight Saving Time) 36

DivX

36~37

Disc Menu

Disc Structure

Supported File Format

Software Upgrade 42~43, 57

Search and Skip

Slow and Step

Subtitle Language

Slide Show

HDMI

20, 35

HDMI Supported Amplifier 24

HDMI Deep Color

SAMSUNG PC Share

Manager

57~58

Internet@TV

35, 53

28, 35

Initial Settings

ꢄꢀ

English

Specifications

Power Requirements

Power Consumption

Weight

AC 120V, 60Hz

14W

3.8 Ibs

General

Disc

Dimensions

17.1 (W) X 8.1 (D) X 1.7 (H) inches

+41°F to +95°F

Operating Temperature Range

Operating Humidity Range

BD (Blu-ray Disc)

10 % to 75 %

Reading Speed : 4.917 m/sec

Reading Speed : 3.49 ~ 4.06 m/sec.

Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 74 min.

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 20 min.

1 Channel : 1.0 Vp-p (75Ω load)

Blu-ray/DVD Disc : 480i

DVD (Digital Versatile Disc)

CD : 5 inches (COMPACT DISC)

CD : 3 1/2 inches (COMPACT DISC)

Composite Video

Y : 1.0 Vp-p (75Ω load)

P_R: 0.70 Vp-p (75Ω load)

P_B: 0.70 Vp-p (75Ω load)

Blu-ray Disc : 1080i, 720p, 480p, 480i

DVD : 480p, 480i

Video Output

Video/Audio

Component Video

HDMI

2D : 1080p, 1080i, 720p, 480p

3D : 1080p, 720p

PCM multichannel audio, Bitstream audio

2 Channel

Digital Audio Output

L(1/L), R(2/R)

Optical

48 kHz Sampling : 4 Hz to 22 kHz

*Frequency Response

Audio Output

96 kHz Sampling : 4 Hz to 44 kHz

*S/N Ratio

*Dynamic Range

*Total Harmonic Distortion

110 dB

100 dB

0.003%

*: Nominal specification

Design and specifications are subject to change without prior notice.

Weight and dimensions are approximate.

English

ꢄꢁ

Appendix

Compliance and Compatibility Notice

NOT ALL discs are compatible

•

Subject to the restrictions described below and those noted throughout this Manual, including the Disc

Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded

commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and

CD-RW/-R discs.

•

Discs other than the above cannot and/or is not intended to be played by this player. And some of the

above discs may not play due to one or more reasons provided below.

Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,

DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to

all operating commands or operate all features of every disc. These and other disc compatibility and

player operation issues with new and existing format discs are possible because:

Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs

because some features may be optional, additional features may have been added to the Blu-ray

Disc format after the production of this player, and certain available features may be subject to

delayed availability;

not all new and existing disc format versions are supported by this player;

new and existing disc formats may be revised, changed, updated, improved and/or supplemented;

some discs are produced in a manner that allows specific or limited operation and feature during

playback;

some features may be optional, additional features may have been added after the production of this

player or certain available features may be subject to delayed availability;

some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and

CD-RW/-R logos may still be non-standardized discs;

some discs may not be played depending on their physical state or recording conditions;

problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the

manufacture of discs;

this player operates differently than a standard DVD player or other AV equipment; and/or

for reasons noted throughout this user manual and for other reason(s) discovered and posted by

SAMSUNG customer care center.

•

If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer care

center.

You may also contact SAMSUNG customer care center for possible updates on this player.

For additional information on playback restrictions and disc compatibility, refer to the Precautions,

Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this

user manual.

Copy Protection

•

Because AACS (Advanced Access Content System) is approved as content protection system for

Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain

restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.

The operation of this product and restrictions on this product may vary depending on your time of

purchase as those restrictions may be adopted and/or changed by AACS after the production of this

product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for

Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM

Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,

or this product, please contact SAMSUNG customer care center.

ꢄꢂ

English

•

Many Blu-ray Disc/DVD discs are encoded with copy protection. Because of this, you should only

connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted

picture from copy-protected Blu-ray Disc/DVD discs.

•

This item incorporates copy protection technology that is protected by U.S. patents and other

intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use,

display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other

materials may subject you to civil and/or criminal liability.

•

For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT

ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND

MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN

PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO

THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

Network Service Disclaimer

All content and services accessible through this device belong to third parties and are protected by

provided solely for your personal noncommercial use. You may not use any content or services in a

manner that has not been authorized by the content owner or service provider. Without limiting the

foregoing, unless expressly authorized by the applicable content owner or service provider, you may

not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or

distribute in any manner or medium any content or services displayed through this device.

THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT WARRANT

CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.

SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED

TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG

DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS

OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO

CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN

CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL

DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN

CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY

CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

Third party services may be terminated or interrupted at any time, and Samsung makes no representation

or warranty that any content or service will remain available for any period of time. Content and services

are transmitted by third parties by means of networks and transmission facilities over which Samsung

has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any

responsibility or liability for any interruption or suspension of any content or service made available

through this device.

Samsung is neither responsible nor liable for customer service related to the content and services.

Any question or request for service relating to the content or services should be made directly to the

respective content and service providers.

English

ꢄꢃ

Appendix

License

•

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s : 5,451,942; 5,956,674; 5,974,380;

5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567

& other U.S. and worldwide patents issued & pending. DTS and the Symbol are

registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are

•

ABOUT DIVX VIDEO : DivX is a digital video format created by DivX,Inc. This is an official

DivX Certified device that plays DivX video. Visit www.divx.com for more information and

software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified device must be registered in order to play

DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section

in the device setup menu. Go to vod.divx.com with this code to complete the registration process and

learn more about DivX VOD.

•

DivX Certified to play DivX video up to HD 1080p, including premium content.

The product unit accompanying this user manual is licensed under certain intellectual property rights of

certain third parties. This product is covered by one or more of the following U.S. patents : 5,457,669

5,561,649 5,705,762 6,043,912 6,438,099 6,467,061 6,556,521 6,578,163 6,697,307 6,728,474

6,771,891 6,894,963 6,895,593 6,937,815 6,996,327 7,009,926 7,085,221 7,088,649 7,092,327

7,099,566 7,123,564 7,142,493 7,142,495 7,145,861 7,146,624 7,151,729 7,161,879 7,164,647

7,167,437 7,173,891 7,177,250 7,194,187 7,203,891 7,209,423 7,210,067 7,228,062 7,245,566

7,245,567 7,257,065 7,263,045 7,269,110 7,272,086 7,272,106 7,280,460 7,283,729 7,286,454

7,304,938

•

This license is limited to private non-commercial use by end-user consumers for licensed contents.

No rights are granted for commercial use. The license does not cover any product unit other than this

product unit and the license does not extend to any unlicensed product unit or process conforming to

ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.

The license only covers the use of this product unit to encode and/or decode audio files conforming to

the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features

or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Open Source License Notice

In the case of using open source software, Open Source Licenses are available on the product

menu.

ꢄꢄ

English

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and

delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing

defects in materials and workmanship for the following limited warranty period:

One (1) Year Parts / Ninety Days (90) Labor

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United

States, and does not include transportation, installation, removal or reinstallation. Warranty repairs must be performed by

SAMSUNG’s authorized service center. To receive warranty service, the original dated bill of sale must be presented upon

request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Transportation to and from the service

center is the responsibility of the purchaser.

SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be

defective during the limited warranty period specified above. The product must be returned during the warranty period with

transportation charges prepaid to SAMSUNG’s designated service center. Prior to returning any product for warranty service,

the purchaser must contact SAMSUNG for problem determination and service procedures. SAMSUNG does not warrant

uninterrupted or error-free operation of the product.

All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and

products assume the remaining original warranty, or ninety (90) days, whichever is longer.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use

of this product and shall not apply to the following, including, but not limited to: damage which occurs in shipment; applications

and uses for which this product was not intended; failures or problems which are caused by products or equipment not supplied

by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of nature; incorrect electrical

line voltage, fluctuations or surges; damage caused by improper or faulty installation; improper connection with any peripheral;

product alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial

numbers; failure to follow operating instructions, customer adjustments, maintenance and environmental instructions that are

covered and prescribed in the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or equipment

which damage this product or result in service problems; failures or problems due to incompatibility with other equipment.

No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any

manner whatsoever. The time within which an action must be commended to enforce any obligations of SAMSUNG arising under

the warranty or under any statute, or law of the United States or of any state thereof, is hereby limited to ninety (90) days from the

date you discovered or should have discovered the defect. This limitation does not apply to implied warranties arising under state

law, if any.

SAMSUNG does not warrant (i) disc compatibility with new and existing format discs or (ii) error free playback in full compliance

with specifications of the compatible disc formats, and SAMSUNG shall not be liable for any data loss recorded in your discs.

SAMSUNG’s responsibility shall be limited to appropriate warranty services during the warranty period through SAMSUNG

customer care center. If you encounter compatibility or data loss problems, please contact SAMSUNG customer care center.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES

WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED

ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH

RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF

REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF

THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE

PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING

THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND

PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY

TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS

LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS

NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or

consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,

and you may also have other rights which vary from state to state.

To obtain warranty service, please contact SAMSUNG customer care center.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care center.

Area

` North America

Canada

Contact Center 

Web Site

Area

Switzerland

Contact Center 

Web Site

www.samsung.com/ch

www.samsung.com/

ch_fr/ (French)

0848 - SAMSUNG (7267864,

1-800-SAMSUNG (726-7864) www.samsung.com

01-800-SAMSUNG (726-7864) www.samsung.com

1-800-SAMSUNG (726-7864) www.samsung.com

CHF 0.08/min)

Mexico

Lithuania

Latvia

8-800-77777

8000-7267

800-7267

www.samsung.com

U.S.A

` Latin America

Estonia

Argentine

0800-333-3733

www.samsung.com

` CIS

0800-124-421

Brazil

Chile

Russia

8-800-555-55-55

8-800-555-555

www.samsung.com

4004-0000

Georgia

800-SAMSUNG (726-7864)

00-1800-5077267

800-7919267

www.samsung.com

Armenia

Azerbaijan

Kazakhstan

Uzbekistan

Kyrgyzstan

Tadjikistan

0-800-05-555

Nicaragua

Honduras

Costa Rica

Ecuador

088-55-55-555

8-10-800-500-55-500

00-800-500-55-500

8-10-800-500-55-500

0-800-507-7267

1-800-10-7267

800-6225

www.samsung.com

El Salvador

Guatemala

Jamaica

1-800-299-0013

1-800-234-7267

800-7267

www.samsung.ua

www.samsung.com/

ua_ru

Ukraine

0-800-502-000

Panama

Puerto Rico

1-800-682-3180

Belarus

810-800-500-55-500

00-800-500-55-500

Rep. Dominica 1-800-751-2676

Moldova

Trinidad &

` Asia Pacific

1-800-SAMSUNG (726-7864) www.samsung.com

Tobago

Australia

1300 362 603

www.samsung.com

Venezuela

Colombia

` Europe

0-800-100-5303

www.samsung.com

New Zealand

0800 SAMSUNG (0800 726 786) www.samsung.com

01-8000112112

www.samsung.com

400-810-5858

China

www.samsung.com

www.samsung.com/

010-6475 1880

0810 - SAMSUNG

Austria

Belgium

Czech

www.samsung.com

(7267864, € 0.07/min)

(852) 3698-4698

Hong Kong

www.samsung.com/

hk_en/

be (Dutch)

02-201-24-18

www.samsung.com/

be_fr (French)

3030 8282

1800 110011

India

www.samsung.com

1800 3000 8282

800 - SAMSUNG

(800-726786)

1800 266 8282

www.samsung.com

0800-112-8888

www.samsung.com

021-5699-7777

Indonesia

Denmark

Finland

France

70 70 19 70

www.samsung.com

030 - 6227 515

01 48 63 00 00

Japan

0120-327-527

1800-88-9999

www.samsung.com

Malaysia

01805 - SAMSUNG

1-800-10-SAMSUNG

Germany

www.samsung.com

(726-7864 € 0,14/Min)

(726-7864)

1-800-3-SAMSUNG

(726-7864)

Hungary

06-80-SAMSUNG (726-7864) www.samsung.com

Philippines

www.samsung.com

Italia

800-SAMSUNG (726-7864)

261 03 710

www.samsung.com

1-800-8-SAMSUNG

(726-7864)

Luxemburg

02-5805777

0900-SAMSUNG

Singapore

Thailand

1800-SAMSUNG (726-7864) www.samsung.com

Netherlands

Norway

Poland

(0900-7267864) (€ 0,10/Min)

1800-29-3232

www.samsung.com

02-689-3232

815-56 480

0 801 1SAMSUNG (172678)

Taiwan

0800-329-999

1 800 588 889

www.samsung.com

022-607-93-33

Vietnam

Portugal

80820-SAMSUNG (726-7864) www.samsung.com

` Middle East & Africa

Slovakia

0800-SAMSUNG (726-7864) www.samsung.com

Turkey

444 77 11

www.samsung.com

902 - 1 - SAMSUNG

www.samsung.com

(902 172 678)

Spain

South Africa

U.A.E

0860-SAMSUNG (726-7864) www.samsung.com

800-SAMSUNG (726-7864)

8000-4726

www.samsung.com

Sweden

0771 726 7864 (SAMSUNG) www.samsung.com

Bahrain

Jordan

U.K

0845 SAMSUNG (7267864)

0818 717100

www.samsung.com

800-22273

Eire

QUESTIONS OR COMMENTS?

COUNTRY

CALL

OR VISIT US ONLINE AT

WRITE

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park,

NJ 07660-0511

1-800-SAMSUNG

IN THE US

www.samsung.com

(7267864)

AK68-01963A

Vivitar DVR410 User Manual
Transition Networks CGETF10XX 10X User Manual
Texas Instruments TI 30Xa Solar User Manual
Sony XR C8220R User Manual
Sony TRV108 User Manual
Sony FA TC1AM Alpha Triple Connector FATC1AM User Manual
Sony DCR DVD755 User Manual
Sony 170S7 User Manual
Sharp Blu ray Player BDAMS20 User Manual
Sanyo HF D4U User Manual