SOYO M19GS User Manual

19.0 TFT Active Matrix LCD Panel User Manual  
Before you start  
1.  
Load the two holders and the stand together,  
and make sure they are secure and tie  
2.  
Put the LCD panel set into the stand, and  
make sure they are secure and tie  
3.  
LCD monitor can be lay back 0˚ ~2˚ (positive  
and negative 2˚).  
English  
2
19.0 TFT Active Matrix LCD Panel User Manual  
Thank you for your purchase of our LCD product. To ensure safety operation of this product, Please read the following menu  
carefully before using this product.  
Unpacking  
Our 19” LCD monitor shall be content with these following items. Make sure you get all these set ready, otherwise contact to  
your dealer or store which you purchased it. At last, feel free to contact us.  
19” TFT LCD Monitor  
External Univ15 pin D-sub  
Power Cord  
(RGB Analog) input signal cable  
ADAPTER TECH.  
External Universal AC Adaptor  
STD-1203  
Audio connector :  
stereo Phone Jack  
(100-240V, 50/60Hz)  
CD User’s manual  
Quick Start Guide  
*
(DPF Card Reader and TV module is optional)  
Hardware Installation  
Be carefully to your LCD monitor, it’s very exquisite but easy to broken. Turn off LCD’s and PC’s power before you set it up.  
Follow our installation step by step.  
Input  
1PC In : This can be connected with the D-Sub 15 pin signal Cable.  
2DVI port : This can be connected with the DVI signal Cable.  
3PC Audio-In port : This can be connected to PC Line out signal Cable.  
4DC portThis is for connecting the power cable.  
*(select option)  
English  
3
19.0 TFT Active Matrix LCD Panel User Manual  
Precaution  
1.  
2.  
3.  
4.  
5.  
Do not expose the monitor to direct sunlight or heat.  
Do not spill liquid on the monitor.  
Do not attempt to open the monitor. You may be hurt by electric shock. For service, call your place of purchase.  
Do not use your monitor when magnets or electronic products are operating nearby.  
Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen. Wipe it with clean, soft clothes  
applied with mild solution.  
6.  
7.  
Do not place anything on your monitor. Bad ventilation may elevate temperature in the monitor.  
Don’t use your fingers to touch the LCD Screen, directly. Fingerprint that contains oil and may by difficult to clear.  
Troubleshooting  
Make sure that your monitor is properly installed if you have encountered any trouble using this product.  
There is no picture on the screen.  
Check:  
1. Power saving mode. Press any key and move the mouse to deactivate the mode.  
2. Signal cable connector pins. If there are bent or missing pins, consult your place of purchase.  
˙ Characters look too dark or too light  
Check:  
1. Using OSD Menu to adjust the Brightness.  
˙ When your monitor shall be adjusted?  
Check:  
1. If the resolution or refresh rate is being changed.  
. The Text appears on the screen are unclear.  
Check  
1. Make sure the resolution or refresh rate match with the Display Mode.  
Warning  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Make sure that the system power is turned off.  
Plug the signal cable to the signal connector at the rear of PC.  
Plug adapter output cable to the jack at the rear of LCD monitor and the power cord to the adapter.  
Connect the power cord to power source.  
Turn on the computer and the monitor.  
For the best quality of the performance, we suggest you to set resolution as page 8 (Display Mode).  
The lock (on the stand) must be locking in while using it.  
Cleaning Notice  
1.  
Unplug the power cord from the AC outlet before clean the product.  
2.  
Never, ever, using any kind of corrosiveness chemical dissolvent to clean the screen, it may hurt your screen  
surface.  
3.  
4.  
We suggest that using a clean camel hair brush or a soft, clean, lint-free cloth to wipe the screen.  
Don’t give any pressure directly to the LCD  
English  
4
19.0 TFT Active Matrix LCD Panel User Manual  
Monitor Adjusting  
Menu control button  
Auto Tune: Auto tune adjust.  
OSD Menu/Enter: Press the button to OSD menu .  
Select Up : Increase the option value in OSD menu.  
Select Down: Increase the option value in OSD menu.  
Volume<->: Decrease the volume value  
Volume<+>:Increase the volume value.  
Power: Turn the LCD power on and off.  
OSD (On-Screen Display) Menu Mode  
Contrast  
Brightness :  
Adjust the brightness of the  
display.  
Adjust the difference  
between light and dark  
area.  
Color Temp :  
Adjust the temp of the pixel  
color.  
Gamma Correct :  
Adjust the gamma Curve.  
English  
5
19.0 TFT Active Matrix LCD Panel User Manual  
OSD (On-Screen Display) Menu Mode (Continue)  
Red :  
Adjust the pixel of red pixel.  
Color Adjust :  
Adjust the RGB color.  
Green :  
Adjust the pixel of green pixel.  
Blue :  
Adjust the pixel of blue pixel.  
H. Position :  
V. Position :  
Adjust the horizontal  
position of the display.  
Adjust the vertical position  
of the display.  
Sharpness :  
Phase :  
Adjust the sharpness of  
display.  
Adjust the phase of PLL  
clock.  
Auto Adjust :  
Clock :  
Auto Tune.  
Adjust the frequency of the  
PLL colck.  
Auto Color :  
Gray Scale auto tune  
English : English  
Deutsch : German  
Français : French  
Language :  
Select the display language  
of the OSD.  
Italiano : Italian  
Español : Spanish  
中 文() : Traditional Chinese  
中 文() : Simply Chinese  
日 本 語 : Japanese  
OSD H. Position :  
Adjust the horizontal  
position of the OSD.  
OSD V. Position :  
Adjust the vertical position  
of OSD.  
English  
6
19.0 TFT Active Matrix LCD Panel User Manual  
OSD (On-Screen Display) Menu Mode (Continue)  
Translucent :  
Adjust diaphaneity of the  
OSD.  
OSD Timer :  
Adjust the timeout of OSD.  
D-SUB : Analogy RGB  
signal.  
Signal Source :  
Switch input signal source.  
DVI : Digital RGB signal.  
Mode Select :  
Switch the display size in DOS  
mode.  
Reset :  
Recall the default setting.  
Volume :  
Increase or decrease the  
sound volume.  
Exit :  
Exit and saving the setting.  
English  
7
19.0 TFT Active Matrix LCD Panel User Manual  
DISPLAY MODE  
Incoming Display Mode  
Resolution  
640X350  
640X480  
640X480  
720X400  
800X600  
800X600  
1024X768  
1024X768  
1280X1024  
1280X1024  
Horizontal Frequency (KHz)  
Vertical Frequency (Hz)  
70.100  
31.475  
31.469  
37.500  
31.469  
37.879  
46.875  
48.363  
60.023  
63.981  
79.976  
59.940  
75.000  
70.087  
60.317  
75.000  
60.004  
75.029  
60.020  
75.024  
1.  
2.  
3.  
We offer you 10 available modes compatible with Windows.  
If any interference occurs on your screen while you modulating your PC or OSD. It is normal.  
To have Best quality present on the PC, remember to upgrade your video card Driver. We strongly recommend you  
to choose a Mode listed in the table.  
4.  
5.  
The other Modes may not be supported that are not list on the table above  
You may use the power management on your computer. It’s good for last service life of the product.  
Specification  
LCD Panel  
Type  
19.0” TFT Active Matrix LCD Display  
H:170° , V:170°  
600 : 1 (Typical)  
Viewing Angle  
Contrast Ratio  
Brightness  
250 (Typical)  
Response Time  
Display Colors  
Max Resolution  
Pixel Pitch  
(15+10) 25 ms  
16.7M colors  
1280X1024(SXGA)  
0.294mm(H)x0.294mm(V)  
Input Signals  
RGB Analog  
Video Level:0.7Vp-p(75)  
Sync TTL with 75internal pull-up resistors  
Frequency FH:30~79KHz  
FV:56~75Hz  
Video In*  
Auto Detect NTSC/PAL interlaced video with input  
format of Composite video(AV) and S-video  
Support digital RGB signal with TMDS signaling type  
NTSC or PAL- B /G, D/ K, I , L/ L’  
Up to 1280X1024@75Hz(Non-interlaced)  
D-sub 15-pins  
DVI*  
ANT*  
Compatibility  
Connector  
PC  
RGB Analog  
DVI  
DVI-D  
Video In*  
Audio  
Power  
S-Video, RCA jack*  
Stereo Phone Jack, RCA-Jack(L/R)  
12V/DC Power Jack  
ANT*  
RF Tuner PH Type terminal  
DPF Card**  
Voltage  
CF/Micro-drive/SM/SD/MMC/MS/MS PRO  
100-240V, 50/60Hz(universal) via external AC Adapter  
Power  
Consumption  
Power saving mode  
Active  
Standby < 3Watt  
< 48Watt Max  
Internal Speaker  
User Interface  
2Wx2(Stereo)  
LED Indicator  
Active  
Off  
- Green  
- Turn off  
Standby - Orange  
5°C~40°C  
20% ~ 80% R.H.  
Operating Condition  
Temperature  
Air Humidity  
Physical  
Dimensions  
Net Weight  
DDC  
463mm(H) x 436mm(W) x 64mm(D)  
6.6 Kg  
DDC1/DDC2B Compliant  
VESA DPMS, EPA Energy Star  
Power Management  
Regulation (Certifications)  
CE, FCC, VCCI, BSMI, UL/CUL  
*Video In and DVI functions are optional.  
** DPF (Digital Photo Frame) is select option.  
English  
8
19.0 TFT Active Matrix LCD Panel User Manual  
Dimensional Drawings  
English  
9

Toshiba MA 1535 2 User Manual
Sony XR C9100R User Manual
Sony Handycam HDR CX110E User Manual
Sony Camcorder HDR UX10 User Manual
Sony Camcorder DSC S3000 User Manual
Sony Blu ray Disc Player with 3D and Wi Fi BDPS5200 User Manual
Sanyo Camcorder VPC T1496 User Manual
Samsung VP L770 User Manual
Samsung S760 User Manual
Samsung Camcorder 2 User Manual