RCA Pro847 User Manual

P r o 8 4 2 / P r o 8 4 7 / P r o 8 4 8

USER‘S

GUIDE

^®C A M C O R D E R

Assistance

We want to make sure you enjoy your new camcorder. If you have any

questions, call:

Camcorder Exchange Warranty...... 800-283-6503 (Pages 54-55)

Customer Service..................................... 800-336-1900 (Page 53)

Accessories......................................... 800-338-0376 (Pages 42-47)

Table of Contents

Safety Information................................i

Product Registration.............................i

First-Time Operation

• Assistance............................................2

• Unpack Camcorder and

• Tape Time Remaining Display ......23

• Quick Review.................................24

• Camera Edit....................................24

• Blank Search ..................................24

• Zooming .........................................25

• AE Shutter Control.........................25

• Focusing .........................................26

• Install Clock Cell............................27

• Date and Time Display .............28-29

• Time Counter..................................30

• Recording and Traveling Tips........31

• Model Pro848 Only: Recording

Accessories ......................................2

• Attach Lens Cap Cord and

Adjust Handstrap .............................3

• Attach Shoulder Strap .........................3

• Supply Power to the Camcorder .........4

• Turn on the Camcorder .......................5

• Insert a Cassette ..................................5

• Adjust Viewfinder Focus ....................5

• Start and Stop Recording ....................5

• Play Back what You have Recorded...5

• Turn Off Camcorder............................5

• Review the Camcorder’s

Controls............................................6

Powering Your Camcorder

• Using the AC Adapter.........................7

• Using the Rechargeable Battery ....8-10

• Using Optional Alkaline “AA”

Batteries .........................................11

• Using the Optional

from a TV or VCR....................32-33

Playback

• Playback and Features

• Viewfinder Playback......................34

• Visual Searching ............................35

• Tape Positioning.............................35

• Stop-Action Pause..........................35

• Model Pro848 Only: Playback on TV .

(or VCR) with AUDIO/

VIDEO IN Jacks.......................36-37

Models Pro842 and Pro847 Only:

Playback on TV (or VCR) with

AUDIO/ VIDEO IN Jacks........38-39

• Playback on a TV Without

AC Adapter/Charger.................12-13

Remote Control.............................14-17

Audio/Video Inputs ..................40-41

Recording

Optional Accessories.....................42-47

• Video Cassettes.................................18

• Making a Recording..........................19

• Viewfinder Displays ....................20-21

• Recording Features

• Accessory Order Form.................45-47

References

• Care and Maintenance .................48-49

• Trouble Checks............................50-52

• Assistance..........................................53

• Limited Warranty.........................54-55

• Specifications....................................56

• Information to User...........................57

• Index (Alphabetical) ....................58-61

• Viewfinder......................................22

• Flying Erase Head ..........................23

• Microphone ....................................23

• Model Pro848 Only: External

Microphone Jack ..........................23

• DISPLAY Button ............................23

• White Balance and Iris ...................23

First-Time Operation

This section describes only the basic steps necessary to set up your camcorder to

record. Refer to the other sections for detailed operation and feature options.

Assistance

The toll-free numbers are available to help you with any problem you may encounter.

Camcorder Exchange Warranty . . . . .800-283-6503

Customer Service . . . . . . . . . . . . . . . .800-336-1900

Accessories . . . . . . . . . . . . . . . . . . . .800-338-0376

1. Unpack the camcorder and accessories.

• Save the packing materials and box in case you ever need to ship or store your

camcorder.

• The items shown below are packed with your camcorder. If any are missing or

appear damaged, contact your dealer immediately.

WARNING: NICKEL

CADMIUM BATTERY

MUST BE RECYCLED

OR DISPOSED OF

PROPERLY.

Rechargeable 6-Volt Battery

Models Pro847 and Pro848: Part No. 234330

Model Pro842: Part No. 234329

Model Pro842/Pro847/Pro848*

* Your camcorder’s appearance may vary

from the one shown in this manual.

Caution: Do

not use this

adapter for

any other

purpose than

supplying

AC Adapter

power to this

Lens Cap Cord

Part No. 234328

Shoulder Strap

Part No. 213004

Part No. 221424

camcorder.

ZOOM

DISPLAY

REC

COUNTER

MEMORY RESET

STOP

REW

PLAY

FWD

PAUSE

Audio/Video Output Cable

Models Pro842 and Pro847: Part No. 217496

Audio/Video Output Cable

Remote control

Part No. 233195

Model Pro848: Part No. 233194

Cautions: Lithium cells. Must be disposed of properly. Never handle

punctured or leaking cells. May cause burns or personal injury.

Keep out of the hands of children. Can cause death or injury if swallowed.

If swallowed, consult a physician immediately for emergency treatment.

The lithium cells used in these devices may explode resulting in a fire or

chemical burn if mistreated. Do not recharge, disassemble, heat above

212˚F (100˚C), or incinerate.

Clock and Remote Cells

3-Volt Micro Lithium Cells –

such as CR2025 – available

from most local drug stores

and camera shops. Use of

other cells present a risk of fire

or explosion.

Never use metallic tweezers to hold the cell, and never short circuit the +

and – sides of the cell.

First-Time Operation

2. Attach lens cap cord and

adjust handstrap.

3. Attach shoulder strap.

A. Unfasten one end of the shoulder

strap from the buckle. Make sure

you leave the buckle on the strap.

A. Press in on the tabs on both sides of

the lens cap to remove it.

B. Thread one end of the shoulder

strap through one of the shoulder

strap rings

B. Attach the lens cap cord to the lens

cap.

Shoulder Strap Rings

C. Pull up the flap of the handstrap

and open the strap.

C. Thread the strap back into the

buckle as shown below. Pull on

the strap and make sure it is

fastened securely before using it to

support your camcorder.

D. Run the cord from the lens cap

through the A/V terminal cover

and over the end of strap.

D. Repeat steps A-C for the other end

of the shoulder strap.

E. Adjust the strap for comfort and

close the flap.

Note Make sure the end of the strap is

positioned securely before closing the

flap.

Cautions: When carrying the camcorder

with the shoulder strap, make sure the

viewfinder is in its down position. This

helps prevent possible damage to the

viewfinder from bumping against your body

as you move.

Make sure the shoulder strap is firmly

attached before using it to carry your

camcorder.

F. Slide the lens cap onto the strap.

First-Time Operation

4. Supply power to the camcorder.

Attach the AC Adapter

Since the battery must be charged before it can be used the first time, attach the

adapter to the camcorder.

To AC 100-

240V, 50/60 Hz

DC IN Jack

PUSH button – press

here to open and

close the battery

Adapter

compartment.

A. Press on the PUSH button to

release the battery compartment

door. Open the compartment

fully.

C. Close the battery compartment. Press

the PUSH button to lock the battery

compartment shut.

D. Plug the AC adapter’s power cord into

an AC operating outlet.

B. Insert the small plug on the AC

adapter in the DC IN jack on the

camcorder.

Install Six Optional “AA” Alkaline Batteries

If you do not want to use the adapter, you may use six “AA” alkaline batteries.

PUSH here to

open battery

compartment.

the polarities (+ and –) on the batteries

to the battery compartment as shown.

A. Press on the PUSH button to

release the battery compartment

door. Open the compartment

fully.

C. Close the battery compartment. Press

the PUSH button to lock the battery

compartment shut.

B. Insert the six alkaline batteries

into the compartment matching

First-Time Operation

VCR (PLAY)/CAM Indicators and Button

CHARGE VCR

CAM

REW Button

PLAY Button

STOP Button

EJECT Button

POWER Switch

Eyepiece

Focus

Control

Thumb

Trigger

7. Adjust viewfinder focus.

5. Turn on the camcorder.

Turn the eyepiece focus control right

or left to obtain the clearest possible

picture.

Slide the POWER switch upward to

turn the camcorder on.

Notes: Whenever the camcorder is

turned on, it turns on in the CAM

(camera) mode. If it does not, press the

VCR(PLAY)/CAM button until the red

CAM indicator beside the

8. Start and stop recording.

• Press and release the REC

START/STOP button (thumb

trigger) to start recording. REC

appears in the viewfinder.

VCR(PLAY)/CAM button lights.

The green and red indicators on each side

of the button let you know the mode of

the camcorder. The red indicator lights

when the camcorder is in the CAM

(camera) mode and the green indicator

lights when the camcorder is in the VCR

(PLAY) mode.

• Press and release the thumb trigger

again to stop recording. The

camcorder is now in the record-

pause mode. PAUSE appears in the

viewfinder.

9. Play back what you have

recorded.

6. Insert a cassette.

A.Press the EJECT button to open the

• Press the VCR(PLAY)/CAM button

to light the VCR(PLAY) indicator.

cassette compartment.

B.Insert the cassette so the safety tab

is at the top and the tape window

faces out.

• Press REW to rewind the tape.

• Press PLAY to play back the tape.

• Press STOP when you are finished

playing back the tape.

C.Gently close the cassette

compartment by pressing on the

area labeled PUSH until it clicks

into place. The top closes

automatically. Do not press down

on the top as it may damage the

camcorder.

10.Turn off the camcorder.

Slide the POWER switch upward to

turn off the camcorder. The

VCR(PLAY) or CAM indicator will

turn off.

First-Time Operation

11. Review the camcorder’s controls.

Zoom Control

Model Pro848 Only:

Lens

“W” - Wide Angle

“T” - Telephoto

MIC (External Microphone Jack)

Eyepiece

Focus Control

Models Pro842 and

Pro847 A (Audio),

V (Video), and RF

Out Jacks

Viewfinder

DC IN 9/6.5V Jack or

DC IN 9V Jack

(Located Inside Battery

Compartment)

Model Pro848

AUDIO, VIDEO, RF

In/Out Jacks,

VIDEO

and Audio/Video

IN/OUT Switch

Battery Compartment

AUDIO

OUT

Remote Holder

(Located in Battery Compartment)

Remote Sensor

Microphone

Shoulder Strap Holder

Models Pro847 and Pro848 Only:

B (Bright) and C (Color) Controls

Model Pro842 Only: B (Bright)

and F (Focus) Controls

Cassette

Compartment

See “Trouble Checks for details.

”

VCR(PLAY)/CAM Button

and VCR(PLAY), CAM,

and CHARGE Indicators

Model

Pro848

Only:

REC

Button

BLANK

POWER

Switch

DISPLAY BLANK REC

DISPLAY

Button

REW

PLAY F FWD

STOP PAUSE

REW

Button

FFWD

Button

Handstrap

PAUSE Button

REC START/STOP

Button (Thumb

Trigger)

PLAY

Button

EJECT

STOP

Button

EJECT Button

Shoulder Strap Holder

PUSH Button

FOCUS LOCK Button

DATE/TIME Button

Powering Your Camcorder

Using the AC Adapter to Power Your Camcorder

The adapter lets you power your camcorder directly from standard household power.

It operates on 100-240 volts, 50/60 Hz. so it can be used virtually anywhere in the

world to power the camcorder.

Caution: Do not use this

adapter for any purpose

other than supplying

power to the camcorder.

To AC 100-

240V, 50/60 Hz

DC IN Jack

PUSH Button

Adapter

Attach the AC Adapter

Using Optional AC Plug Adapter

1. Press the PUSH button to open the

battery compartment. Carefully open

the compartment fully.

An optional plug adapter may be

required in some countries.

2. Insert the small plug on the AC

adapter in the DC IN jack on the

camcorder.

Optional AC

AC 100-240V

Plug Adapter

3. Close the battery compartment. Press

the PUSH button to lock the battery

compartment shut.

1. Plug the adapter’s plug into the AC

plug adapter.

2. Plug the AC plug adapter into the

AC outlet.

4. Plug the AC adapter’s power cord into

an operating outlet.

Remove the AC Adapter

1. Unplug the adapter from the wall

outlet.

2. Open the battery compartment and

remove the plug from the DC IN jack.

Powering Your Camcorder

Using the Rechargeable Battery to Power Your Camcorder

The battery must be charged as described on the next page before it can be used the

first time. Initial charging will take approximately 12 hours for the 234329 battery, and

approximately 16 hours for the 234330 battery. When fully charged, the 234329

battery (model Pro842) should supply about 60 minutes of operating time and the

234330 battery (models Pro847 and Pro848) should supply about 65 minutes of

operating time (depending on how much you use zoom and pause and load and unload

cassettes).

Note: The small marker switch on top of the 234330 battery is for use as a personal reminder to

help you remember to recharge the battery. It has no other function.

Battery Safety

Precautions

Do not short the battery’s

terminals.

Do not attempt to

disassemble or modify the

battery. There are no user-

serviceable parts inside.

Use the battery only with

specified adapter/chargers

and camcorders.

Throwing the battery into

a fire or exposing it to

excessive heat – over

149ºF (65ºC) could be

hazardous.

PUSH Button

Install the Battery

Remove the Battery

1. Press the PUSH button to open the

battery compartment. Carefully open

the compartment fully.

1. Press the PUSH button to open the

battery compartment. Carefully open

the compartment fully.

2. Insert the battery sideways as shown

and snap into place.

2. Slide the battery towards the back of

the camcorder and lift out.

3. Close the battery compartment. Press

the PUSH button to lock the battery

compartment shut.

3. Close the battery compartment. Press

the PUSH button to lock the battery

compartment shut.

ATTENTION: The RBRC seal on the battery used in your

Thomson Consumer Electronics product indicates that we

are participating in a program to collect and recycle Nickel

Cadmium batteries throughout the United States. Please call

1-800-8-BATTERY for information or contact your local

recycling center.

Ni-Cd

Powering Your Camcorder

Using the Rechargeable Battery to Power Your Camcorder

The battery must be installed as described on the previous page before it can be charged.

CHARGE VCR

CAM

CHARGE Indicator

Battery Installed

To AC 100-

240V, 50/60 Hz

DC IN Jack

Adapter

Charge the Battery

6. When the CHARGE indicator starts

flashing, make sure to unplug the

adapter from the wall outlet and the

camcorder.

1. Install the battery as described on the

previous page.

2. Insert the small plug on the AC

adapter in the DC IN jack on the

camcorder.

Notes: After approximately 16 hours, the

CHARGE indicator will begin flashing to

remind you that the battery is charged. Your

battery may be charged before the CHARGE

indicator starts flashing.

3. Plug the AC adapter into an operating

AC outlet.

4. Slide the POWER switch down into

the CHARGE position. The CHARGE

indicator will light and the battery will

begin charging.

The CHARGE indicator will start flashing

approximately 16 hours after the POWER

switch is placed in CHARGE even if no

battery is being charged.

5. The 234329 battery (model Pro842)

takes approximately 12 hours to

charge, and the 234330 battery

Do not charge other models of batteries with

the camcorder.

(models Pro847 and Pro848) takes

approximately 16 hours to charge.

Powering Your Camcorder

Battery Level Indicator

• When there is approximately five

minutes of battery power left in the

The battery level indicator appears in the

viewfinder when approximately half the

battery power is left. This indicator

shows you the amount of power in the

battery.

battery,

appears in the

viewfinder. The camcorder will turn

off automatically after a few minutes.

Slide the POWER switch upward to

turn off the camcorder before replacing

the battery.

The battery level indicator will not be

recorded on the tape when it appears in

the viewfinder.

Battery Level Indicator

in Viewfinder

• As the power is used

appear.

, and

Nickel Cadmium Battery Care and Storage

Do not store a battery pack where it can

reach high temperatures.

The operating time of the battery may be

shorter than normal even after a full

charge:

Remove the battery from the camcorder

when it is not in use to prolong the

battery life.

• If it is used for the first time.

The operating time is restored to its

original level after the battery has

been used two or three times

(completely discharged and

recharged).

Recharge the battery just before it is

used. If the battery is recharged and not

used, it will slowly lose its charge.

Make sure to exhaust the charge of the

battery pack completely when

• If it is used in low temperatures.

• If it is discharged completely and

stored for a long period (more than

three months).

recording. If the battery pack is

recharged when the previous charge is

not completely exhausted, the charge

time gradually decreases.

• If it is stored at temperatures above

104ºF (40ºC).

Charge the battery within a temperature

range of 50ºF to 86ºF (10ºC to 30ºC) to

prevent damage.

• If the record-pause mode is used

frequently.

• If excessively loading and unloading

cassettes.

After repeated chargings and use, the

operation time decreases gradually.

When the operation time becomes too

short to be useful, it is time to replace

the battery.

Powering Your Camcorder

Using Optional Alkaline “AA” Batteries

You can power the camcorder with six alkaline dry-cell “AA” batteries.

Install the Alkaline Batteries

1. Press the PUSH button to open the

battery compartment. Carefully open

the compartment fully.

Notes: The camcorder may not operate

properly in cold temperatures below 50ºF

(10º C).

The camcorder and battery level indicator

may not operate properly when the batteries

need to be replaced.

2. Insert six alkaline batteries into the

compartment matching the polarities

(+ and –) on the batteries to the

battery compartment as shown.

Remove the batteries if you will not be using

the camcorder for a long period of time to

extend the useful life of the batteries.

3. Close the battery compartment. Press

the PUSH button to lock the battery

compartment shut.

Safety Precautions When Using Alkaline Batteries

Do not short, disassemble, heat, or throw the batteries into a fire.

Do not recharge the batteries or short the battery terminals.

Do not short the battery terminals for the nickel cadmium battery.

Batteries become warm during and after use. Use caution when removing them.

Use “AA” alkaline batteries only during their recommended lifetime.

Remove at least one battery if you will not be using the camcorder for a long

period of time to extend the useful life of the batteries.

Do not use manganese batteries to power the camcorder.

To reduce the risk of battery leakage or an explosion:

• Make sure battery is inserted with correct polarity.

• Remove the batteries from the camcorder before storing it.

• Do not use old and new batteries at the same time.

• If the batteries leak, remove the batteries and carefully wipe up the fluid.

• Keep the terminals clean. Use a dry cloth to wipe any dirt off the terminals.

Powering Your Camcorder

Using the Optional AC Adapter/Charger

The optional CPS801C AC adapter/charger shown on page 43 will power

the camcorder and charge your rechargeable nickel cadmium battery.

To AC Wall Outlet

100-240 Volts, 50/60 Hz.

Caution:

When a battery

is attached to

the adapter/

Battery Pack

charger, do not

turn them

upside down.

The battery

may fall off and

be damaged or

cause injury.

REFRESH Button

CHARGE Indicator

POWER Indicator

Charging and Refreshing Rechargeable Battery

The battery pack provides longer operation time if it is refreshed (completely

discharged) before every charging. Refreshing takes approximately 3-1/2 hours.

installed. Remove it and try again. If the

CHARGE indicator still flashes rapidly, it

may indicate the battery pack cannot be used.

Charge the Battery

1. Plug adapter/charger into an AC outlet

(100-240V, 50/60Hz).

Refresh the Battery

The POWER indicator lights.

1. Plug in the adapter/charger and attach

the battery.

2. Align the reference marks on the

battery with marks on the adapter/

charger and slide the battery in the

direction of the arrow until it locks.

The CHARGE indicator lights while

battery is charging.

2. Press REFRESH.

The CHARGE indicator flashes slowly

and any remaining charge in the

battery is discharged. The CHARGE

indicator then stops flashing and the

battery pack is recharged.

3. Remove the battery when the

CHARGE indicator turns off.

Notes: Make sure AC power cord is removed 3. Remove the battery when the

from the outlet when finished.

CHARGE indicator turns off.

If the CHARGE indicator flashes rapidly, this

may indicate the battery is improperly

Powering Your Camcorder

Power the Camcorder

The optional CPS801C AC adapter/charger and optional DCC100 DC cable let

you power your camcorder directly from standard household power. It

operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the

world to power the camcorder or recharge your battery pack. You may need a

plug adapter in some countries. Consult your dealer.

To AC 100-

240V, 50/60 Hz

DC IN Jack

DC Cable

Caution: Do not use this adapter/charger for

any purpose other than charging recommended

battery or supplying power to the camcorder.

Adapter/Charger

1. Unplug the adapter/charger from the

wall outlet.

Attach Adapter/Charger

1 Press the PUSH button to open the

battery compartment. Carefully open

the compartment fully.

2. Disconnect the DC cable from the

camcorder and adapter/charger.

2. Plug one end of the optional DC cable

into the DC OUT jack on the adapter/

charger and the other end into the DC

IN jack on the camcorder.

Using Optional AC Plug Adapter

An optional plug adapter may be

required in some countries.

3. Close the battery compartment. Press

the PUSH button to lock the battery

compartment shut.

4. Plug the AC adapter/charger power

cord into an AC operating outlet. The

adapter/charger’s POWER indicator

lights.

Optional AC

AC 100-240V

Plug Adapter

Plug the adapter/charger’s plug into

the AC plug adapter.

Remove the Adapter/Charger

2. Plug the AC plug adapter into the

AC outlet.

Powering Your Camcorder

Lithium Cell Installation

The remote’s lithium cell is packed separately. Install it as follows:

Insert Pencil Here

Lithium Cell

Cell Holder

3. Replace cell holder in remote until it

clicks into place.

1. Turn remote over, insert a pencil or

paper clip in the small hole, and slide

cell holder in the direction of the

arrow to remove it.

Notes: Never place anything heavy on top of

the remote control or lay it upside-down.

Replace cell when camcorder fails to respond

to remote.

Cell Holder

Remove cell from remote if it will not be used

for a month or more. This will prevent

possible damage from cell leakage.

If leakage occurs, wipe up liquid inside

compartment and replace cell.

Lithium Cell

2. Insert the cell in the cell holder so the

positive (+) terminal faces up.

Cautions: Lithium cell. Replace only with 3-volt lithium cell – such as CR2025. Use of other cell

presents a risk of fire or explosion. Must be disposed of properly. Never handle punctured or leaking

cell. May cause burns or personal injury.

Keep out of the hands of children. Can cause death or injury if swallowed. If swallowed, consult a

physician immediately for emergency treatment.

The lithium cell used in this device may explode resulting in a fire or chemical burn if mistreated. Do

not recharge, disassemble, heat above 212˚F (100˚C), or incinerate.

Never use metallic tweezers to hold the cell, and never short circuit the + and – sides of the cell.

Remote Control

Remote Sensor

The remote operates the camcorder by infrared light, so it is protected from electrical

and sound interference. However, the remote must be aimed directly at the

camcorder’s remote sensor. There cannot be any obstructions between them.

Remote Control Sensor

Note: The camcorder may not respond to

the remote if its sensor is exposed to direct

sunlight or strong artificial light.

Storing the Remote Control

When you are not using the remote control you may want to store it in the remote

control holder located in the camcorder’s battery compartment.

Remote

Control

Holder

Store the Remote Control

Remove the Remote Control

1. Press the PUSH button to open the

battery compartment. Carefully open

the compartment fully.

1. Press the PUSH button to open the

battery compartment. Carefully open

the compartment fully.

2. Insert the remote control in the

remote control holder and click it

into place as shown.

2. Carefully pull back the remote

control holder, and lift the remote

control as shown.

Remote Control

A brief description of the remote button’s functions is given here. Many of the buttons

perform the same functions as the corresponding controls on the camcorder. The

battery must be installed as shown on page 14.

ZOOM

DISPLAY

REC

COUNTER

MEMORY RESET

STOP

REW

PLAY

F FWD

PAUSE

ZOOM (T and W) Buttons

COUNTER MEMORY and RESET

Buttons

During record or record pause:

• Press T to move the lens in the

telephoto (close-up) direction.

• Press W to move the lens in the

wide-angle direction.

Used with the time counter and

memory stop feature. Details are on

page 30.

STOP Button

DISPLAY Button

When the camcorder is in VCR

(PLAY) mode, press STOP to stop

playback, rewind, or fast-forward

operation.

Press this button to have the viewfinder

displays appear on a TV monitor.

Details are on pages 23, 37 and 39.

Remote Control

REC (Record) Button

REW (Rewind) Button

When the camcorder is in CAM

(camera) mode, press REC to start

and stop recording.

Camcorder is in CAM (camera)

mode:

• When the camcorder is in record

pause, press and hold REW to

visually search the tape in reverse.

Release REW to return to record-

pause.

PLAY Button

Press PLAY when the camcorder is

in VCR (PLAY) mode to begin

playback.

Camcorder is in VCR(PLAY) mode:

• When the camcorder is stopped,

press REW to rewind the tape.

Press STOP to stop rewinding the

tape.

F FWD (Fast Forward) Button

Camcorder is in CAM (camera)

mode:

• When the camcorder is in record

pause, press and hold F FWD to

visually search the tape forward.

Release F FWD to return to

record-pause.

• When a tape is playing, press and

hold REW to visually search in

reverse. Release REW to return to

normal playback.

Camcorder is in VCR(PLAY) mode:

PAUSE Button

• When the camcorder is stopped,

press F FWD to fast forward the

tape. Press STOP to fast

During playback, press PAUSE to

produce a stop-action picture. Press

PAUSE or PLAY to return to normal

playback.

forwarding the tape.

• When a tape is playing, press and

hold F FWD to visually search

forward. Release F FWD to return

to normal playback.

Caution: Pause is designed for

momentary interruptions and

should not be used for an

extended period of time. If the

camcorder remains in pause for

more than three minutes, it will

automatically enter the stop mode

and then turn off.

Recording

Video Cassettes

We recommend that our cassettes be used with your camcorder. Use of poor quality or

damaged tapes can contaminate the video heads. Head cleaning is not covered under

warranty and is considered normal maintenance.

Inserting or Removing Cassettes

Caution: Insert the cassette so the

safety tab is at the top and the tape

window is facing out. The cassette

EJECT

Button

should slide easily in the compartment.

Do not force the cassette.

PUSH Here to Close

1. Attach a power supply and turn on the

camcorder.

4. Gently press the compartment where

it is labeled PUSH until it clicks into

place. The top closes automatically.

2. Press the EJECT button to open the

CAUTION: Do not press down on the

top or you may damage your

camcorder.

cassette compartment.

3. Insert the tape with the safety tab on

top and the tape window facing out.

Erase Protection — Safety Tab

You can protect your video cassettes

from being erased by closing the safety

tab. To erase a previous recording, open

the safety tab and record over it.

Safety Tab

To Prevent Erasure

Close Safety Tab

(Expose Red)

To Record Again

Open Safety Tab

(Red Disappears)

Recording Times

Cassette

Recording Time

The camcorder records in standard speed

(SP). See the chart for the maximum SP

recording times for some 8mm cassettes.

P6-15

P6-20

P6-45

P6-60

P6-90

P6-120

P6-150

15 Minutes

20 Minutes

45 Minutes

60 Minutes

90 Minutes

120 Minutes

150 Minutes

Recording

Making a Recording

The steps below tell you how to make a recording and suggest using some of the

recording features. Each feature is described in detail on the following pages.

Eyepiece

Focus Control

Zoom Control

DISPLAY BLANK REC

CAM (Camera) Indicator

REW

PLAY

FWD

REW Button

STOP PAUSE

EJECT

POWER Switch

Thumb Trigger

EJECT Button

To Make a Recording:

• Press and release the the thumb

trigger again to stop recording. The

camcorder is now in record pause.

PAUSE appears in the viewfinder.

1. Attach a power supply.

Attach the adapter, charged battery, or

install optional “AA” alkaline

batteries.

• The camcorder will automatically

turn off if it remains in record pause

for three minutes. Slide the POWER

switch upward to turn the camcorder

back on.

2. Remove the lens cap and attach it to

the handstrap.

3. Slide the POWER switch upward to

turn on the camcorder.

The CAM indicator will light and the

camcorder will enter the record pause

mode. PAUSE appears in the

viewfinder

7. Use the zoom feature.

• Zoom in and out using the zoom

control.

8. Review what you have recorded.

• Press and release REW to review the

last few seconds of the recording.

4. Insert a video tape.

• Press EJECT.

• Press and hold REW or FFWD to

visually see what you have recorded.

Release the button to begin recording

at that point.

• Insert the cassette with safety tab

facing up and the tape window facing

out.

5. Adjust the viewfinder and eyepiece

focus control for your vision.

9. When you are finished, slide the

POWER switch upward to turn off

the camcorder. Replace the lens

cap.

6. Start and stop recording.

• Press and release the thumb trigger

(REC START/STOP button) to start

recording. REC appears in the

viewfinder.

Recording

Viewfinder Displays

REC

AE:100 M 0:00:00

TAPE

FOCUSLOCK

PM 8:30:00

11.18.1996

Status Displays

Warnings and Information

• TAPE appears during recording

when there is approximately five

minutes of tape left.

• The REC indicator appears when

the camcorder is recording.

• The PAUSE indicator appears

• TAPE END appears when the end

of the tape is reached during

recording or a cassette is inserted

with its tape already at the end.

during record pause.

• The FF indicator appears during

fast forward.

• The REW indicator appears during

rewind.

•

appears when the safety tab

on the cassette has been closed,

there is no cassette in the

camcorder, or condensation has

formed inside the cassette or

camcorder.

• The STOP indicator appears when

the camcorder is stopped.

• The BLANK indicator appears

during blank search operation.

indicator appears when

•

Zoom Indicator

excessive moisture (condensation)

has entered the camcorder. The

camcorder will not operate when

this indicator appears. Place the

camcorder in a warm, dry area until

this indicator disappears.

The zoom indicator appears here

when you use the zoom control.

• Details on page 25.

Recording

Elapsed Time-Counter

Tape Time Remaining Indicator

• The time counter appears during

recording and playback.

This indicator shows the

approximate amount of tape

remaining in the cassette.

• An “M” appears in front of the time

counter when memory-stop is on.

• Details on page 23.

• Details are on page 30.

Battery Level Indicator

AE (Auto Exposure) Higher

Shutter Speed Indicator

• This indicator shows how much

power is left in the rechargeable

battery.

A shutter speed (1/60, 1/100, 1/150,

or 1/250) is automatically selected

by the camcorder.

• Details are on page 10.

• No indicator appears for1/60

second shutter speed.

AUTO DATE, Date, Date and

Time, or 88:88

• AE:100, AE:150, or AE:250 will

appear when the higher shutter

speed has been selected by the

camcorder.

AUTO DATE, date, or date and time

appears in this area of the

viewfinder when you press the

DATE/TIME button.

• These displays will be recorded on

your tape when they appear.

FOCUSLOCK ( ) Indicator

• Details are on pages 28-29.

One of these indicators appears

when the focus has been locked.

• 88:88 appears here when the clock

lithium cell has not been installed

or needs to be replaced. Details

are on page 27.

• Details on page 26.

Recording

Viewfinder

The camcorder’s viewfinder is a miniature monitor that displays the picture

seen by the camcorder when recording.

Adjust Viewfinder for Convenient Viewing

For convenient viewing, you can rotate the viewfinder up and down.

Viewfinder

Cautions

Eyepiece Focus Control

Do not force the

viewfinder to rotate

completely around.

This will damage the

viewfinder and/or the

camcorder.

When carrying the

camcorder with the

shoulder strap, put the

viewfinder down.

This helps prevent

possible damage to

the viewfinder from

bumping against your

body as you move.

Eyepiece Focus Control

The eyepiece focus control lets you set

the focus of the viewfinder for your

personal vision. If you wear eye glasses,

you probably can operate the camcorder

without them.

It is easiest to set the correct focus by

focusing on one of the viewfinder’s on-

screen displays.

Recording

Model Pro848 Only

MIC (External Microphone Jack)

DISPLAY

Button

ZOOM

DISPLAY

REC

COUNTER

MEMORY RESET

STOP

REW

PLAY

FWD

DISPLAY

Button

Microphone

PAUSE

Flying Erase Head

Automatic White Balance and Iris

A separate erase head is mounted on

the spinning headwheel (hence the term

“flying”). This allows you to make

clean edits without the “glitches” or

“rainbow noise” that may occur at the

beginning or the end of recordings.

The camcorder automatically adjusts the

white balance and iris to give you the

best recording for each scene.

Tape Time Remaining Display

The camcorder will automatically

calculate the tape time remaining on the

cassette in the camcorder during

recording or playback. The indicator

will appear in the viewfinder at the

halfway point of the tape.

Microphone

The microphone picks up the sound

during a recording. It is more sensitive

to sounds coming from the direction the

lens is pointed.

Model Pro848 Only: External

Microphone Jack

The camcorder has an external

microphone jack (MIC) for attaching an

optional microphone.

Viewfinder Display

DISPLAY Button

and

appear as

Press the DISPLAY button when the

camcorder is connected to a TV monitor

to have the viewfinder displays appear

on the TV screen. They will be

recorded during tape copying if they

appear. Press DISPLAY again to

remove them.

you near the end of the tape.

TAPE END flashes when you have

reached the end of the tape.

Recording

VCR(PLAY)/CAM

Button

ZOOM

and Indicators

DISPLAY

REC

COUNTER

MEMORY RESET

BLANK

Button

STOP

REW

PLAY

F FWD

DISPLAY BLANK REC

FWD

Button

REW

Button

REW

PLAY F FWD

STOP PAUSE

PAUSE

REW

Button

FFWD

Button

Thumb

Trigger

EJECT

Blank Search

Quick Review Feature

Press and quickly release REW when the

camcorder is in record pause to review

the last few seconds of a recording. The

VCR(PLAY)/CAM button must be in the

CAM position.

With the press of a button, the camcorder

advances through the tape looking for a

blank section. This feature saves time

and tape by locating the end of the last

recorded segment.

The camcorder will play back the last

few seconds of the recording, return the

tape to its previous position, and return to

record pause.

1. Place the camcorder in record pause.

2. Press the BLANK button.

The camcorder fast forwards or

rewinds the tape to the end of the

recorded portion, stops, and enters

record pause. BLANK appears in the

viewfinder during blank search.

Notes: Before starting to record, make

sure the camcorder has stopped on the

blank section of tape where you want to

begin recording. If there are blank

portions of tape between scenes, the blank

search feature may stop on blank sections

of tape as short as 60 seconds.

Camera Edit Feature

The camera edit feature allows you to

position the tape when the camcorder is

in record pause. The VCR(PLAY)/CAM

button must be in the CAM position.

• Press and hold REW to visually search

the recorded tape in reverse.

• Press and hold F FWD to visually

search forward on the recorded tape.

Blank search can also be used in the

VCR(PLAY) mode. When the camcorder is

being used to play back a tape, just place

the camcorder in the stop mode and press

BLANK.

Release the button to return the

camcorder to record pause at that point

on the tape. Press the thumb trigger

(REC on remote) to start recording at this

point.

Recording

Zooming

You can zoom in and out for close ups or wide-angle shots just by sliding the zoom

control on the camcorder or pressing the button on the remote. The camcorder can

automatically focus when you zoom at most distances.

ZOOM T and W

Buttons

Zoom Control

ZOOM

DISPLAY

REC

COUNTER

MEMORY RESET

STOP

REW

PLAY

FWD

PAUSE

Viewfinder Display

Using the Zoom Control

• To move the lens in the wide angle

direction, slide the control toward

W or press the ZOOM W button on

the remote.

1. To zoom in or out, slide the zoom

control on the camcorder or press the

ZOOM T or W button on the remote.

• To move the lens in the telephoto

(close-up) direction, slide the

zoom control toward T or press

the ZOOM T button on the

remote.

The zoom level indicator appears in the

viewfinder.

AE (Automatic Exposure) Shutter Speed Control

The camcorder automatically adjusts the

shutter speed (1/60, 1/100, 1/150, or

1/250) according to the lighting

conditions.

AE:100

• 1/60 second shutter speed is selected

for normal recording situations. No

indicator appears in the viewfinder.

• If recording in bright lighting

conditions, AE:100, AE:150, or

AE:250 will appear in the

viewfinder.

Viewfinder Display

Recording

Focusing

Under normal conditions, the camcorder can adjust focus automatically on the object

located in the center area of the viewfinder. Under certain conditions, you may want

to use the focus lock feature.

VCR(PLAY)/CAM Button

and Indicators

FOCUS LOCK Button

Conditions Requiring Focus Lock

Using Focus Lock

• When recording a subject through a

dirty window.

The focus lock feature is useful when

objects pass between your subject and

the camcorder or your main subject is

not located in the center of the

viewfinder.

• When recording two subjects, one

nearby and one in the distance.

• When recording a horizontally or

vertically striped subject.

1. Center the main object in the

viewfinder.

• When the subject is not in the center of

the viewfinder.

2. Press FOCUS LOCK to turn on the

focus lock feature. FOCUSLOCK

will appear for a few seconds and

then will remain in the viewfinder.

• When recording very bright subjects.

• When recording a subject without

contrast, such as, a white wall.

FOCUSLOCK

3. Press FOCUS LOCK again to turn off

the focus lock feature.

will be

removed from the viewfinder.

Note: When zooming in to record a subject

in the distance, auto focus might not function

properly because of picture instability. Use a

tripod for stable focused pictures.

Recording

Install the Clock Lithium Cell

The clock cell indicator 88:88 will flash for a few seconds in the viewfinder when you

turn on the camcorder if the cell has not been installed or needs to be replaced.

Clock Cell

Holder

Install Cell

Remove Cell

To remove cell, slide the cell out of the

cell holder.

1. Make sure camcorder is turned off, and

remove any power supply attached to

the camcorder.

2. Pull our the clock cell holder.

3. Insert the clock cell with the “+”

terminal facing up in the cell holder.

4. Replace the clock cell holder. It will

click into place.

Cautions: Lithium cell. Replace only with 3-volt lithium cell – such as CR2025.

Use of other cell presents a risk of fire or explosion. Must be disposed of properly.

Never handle punctured or leaking cell. May cause burns or personal injury.

Keep out of the hands of children. Can cause death or injury if swallowed. If

swallowed, consult a physician immediately for emergency treatment.

The lithium cell used in this device may explode resulting in a fire or chemical burn if

mistreated. Do not recharge, disassemble, heat above 212˚F (100˚C), or incinerate.

Never use metallic tweezers to hold the cell, and never short circuit the + and – sides

of the cell.

Recording

Set the Date and Time

The date and time must be set before it can be displayed and recorded on your tapes.

The clock cell must be installed as shown on page 27 before the date can be set and

recorded.

VCR(PLAY)/CAM Button and Indicators

POWER

AM or PM

Switch

Hours

Minutes

Seconds

AM 0:00:00

1.1.1996

Year

Day

Month

FOCUS LOCK Button

DATE/TIME Button

1. Attach a power supply to the

camcorder. Slide the POWER switch

upward to turn on the camcorder.

Make sure the CAM indicator is on, if

not, press the VCR(PLAY)/CAM button

to turn it on.

6. After you set the minutes, press

FOCUS LOCK to start the seconds and

remove the flashing cursor from the

viewfinder.

2. Press and hold down the DATE/TIME

and FOCUS LOCK buttons until the

reset time and date appears.

Correct the Date or Time

To correct the date or time after the clock

has been started, simultaneously press the

DATE/TIME and FOCUS LOCK buttons.

Then correct the date or time using the

DATE/TIME and FOCUS LOCK buttons.

3. A flashing cursor lets you know which

part of the display you are setting.

Press the DATE/TIME button

repeatedly until the correct month

appears.

4. Then press FOCUS LOCK. The

flashing cursor will move to the next

part of the display.

5. Repeat steps 3 and 4 until you have

entered the correct month, day, year,

hour with AM or PM, and minutes.

Recording

Recording Date or Date and Time on Your Tape

The date or date and time can be recorded on your tape. Whenever one of the displays

appears in the viewfinder, it will be recorded. The camcorder also has an AUTO DATE

feature.

The clock cell must be installed and the clock set.

Repeatedly Press

DATE/TIME

AUTO DATE

11.18.1996

Date Only

Auto Date

AM 12:00:00

11.18.1996

Date and Time

No Display

Select the Display to Record

1. Repeatedly press DATE/TIME to select

• Select date only to continuously

record the date.

the display you want to record.

• Select AUTO DATE to automatically

record the date for 15 seconds at the

beginning of the first recording of the

day.

• Select date and time to continuously

record the date and time.

• Select no display if you do not want

any of the displays recorded.

Note: AUTO DATE will remain selected

even if the POWER switch is turned off.

Recording

Time Counter

The time-counter display shows the actual time elapsed when recording or playing

back a segment of tape. During playback, the memory-stop feature helps locate a

certain point on the tape. When memory stop is on, the tape will stop automatically

during rewind or fast forward when the time counter reaches M 0:00:00.

VCR(PLAY)/CAM

COUNTER

ZOOM

COUNTER

MEMORY

Button

RESET

and Indicators

DISPLAY

REC

Button

COUNTER

MEMORY RESET

PLAY

STOP

REW

PLAY

STOP

Button

FWD

PLAY

Button

DISPLAY BLANK REC

REW

Button

PAUSE

REW

PLAY F FWD

STOP PAUSE

REW

Button

STOP

Button

EJECT

To Use the Memory-Stop Feature

1. Locate the place on the tape you want

to return to, press the VCR(PLAY)/

CAM button to light the green

VCR(PLAY) indicator, and press

PLAY.

4. Continue to play the tape. When you

want to return to the place you marked,

press the STOP button.

5. Press REW. The tape will rewind to

the time counter reading of M 0:00:00.

2. Press COUNTER RESET on the

remote control to reset the time

counter to 0:00:00.

Notes: During rewind, the tape might not

stop exactly at the M 0:00:00 point.

A minus (–) will appear in front of the time

counter if the tape is rewound farther back

than a time counter reading of 0:00:00.

3. Press COUNTER MEMORY on the

remote control to turn the time

counter’s memory-stop feature on.

When memory stop is on, an M

appears before the time counter in the

viewfinder.

M 0:00:00

Time Counter With

Memory Stop Turned On

Recording

Recording Tips

• Be aware of video and audio

backgrounds. Background details

barely noticed while you are taping

may show up as visual “clutter” on

your recording. Background noises

(especially TV sets, radios, household

appliances, traffic sounds, etc.) can

detract from the sound you want to

record.

• In case of fire or theft, make a video

recording of your home and contents to

store in a safe place.

• Try to make sure indoor scenes are

well-lit.

• Do not move the camcorder rapidly

from side-to-side while recording.

A steady, gradual “pan” avoids

blurring and “jitter”.

• Avoid long “still” shots of landmarks

and scenic attractions. Recordings are

more interesting if they include people

and details. “Local color” will give

travel videos lasting appeal. Consider

recording a familiar or landmark scene

from an unfamiliar vantage point.

• Use the viewfinder to make sure the

camcorder is level while recording or

your scenes will appear “tilted”.

• Do not bump or tap the camcorder’s

microphone while recording because

this sound will be recorded.

• Include close-ups of individuals when

taping family outings or group

functions.

Traveling Tips

• Write down your camcorder’s serial

number and keep it separate from the

camcorder when traveling. If your

camcorder is lost or stolen, you will be

able to identify it.

• Make sure you have any plug adapters

that you may need before taking your

camcorder to other countries. Consult

your dealer for advice.

• Carry your camcorder in a carrying

case when traveling. See page 42 for a

case designed especially for this

camcorder. An ordinary suitcase or

carry bag does not offer the protection

your camcorder needs. Treat your

camcorder as carry-on luggage to

protect it from rough handling.

• Use extra care to avoid damage to your

camcorder and accessories when

operating them at a beach or pool.

Spray, sand, and dust should be

avoided. If your lens has been exposed

to the elements, clean it only with

proper lens cleaning supplies.

Recording

Model Pro848 Only: Recording from a TV or VCR

To record on your camcorder from a TV or VCR having AUDIO/VIDEO OUT jacks,

use the audio/video cable that came packed with your camcorder.

Yellow Video Plug

Back of

White and Red

Stereo VCR or

TV Monitor

Audio

Plugs

Audio/Video

Cable

AUDIO

OUT

VIDEO

OUT

White and Red

Audio

Plugs

Yellow

Video

Plug

VIDEO

AUDIO

OUT

Audio/Video

IN/OUT Switch

Back of

Mono VCR or

TV Monitor

Yellow Video Plug

Audio and Video Jacks

Located Behind AV Cover

White and Red

Audio

AUDIO

OUT

Plugs

VIDEO

OUT

Optional

Y-Adapter

White and Red

Audio

Plugs

Audio/Video

Cable

Yellow Video Plug

(continued on next page)

Recording

Connection

1. Attach the white plug on one end of

the included audio/video cable to the

AUDIO OUT L jack on the TV or

VCR and the other white plug to the

white AUDIO L jack under the A/V

cover.

3. Attach the yellow plug on one end of

the included audio/video cable to the

VIDEO OUT jack on the TV or VCR

and the other yellow plug to the

yellow VIDEO jack under the A/V

cover.

2. Attach the red plug on one end of the

included audio/video cable to the

AUDIO OUT R jack on the TV or

VCR and the other red plug to the red

AUDIO R jack under the A/V cover.

Caution: The unauthorized recording of

television programs and other recorded

material may infringe the rights of others.

Note: If your TV or VCR is not stereo,

you may need an optional Y-adapter.

Operation

1. A. Camcorder connected directly to

TV monitor: Turn on the TV and

tune it to the channel you want to

record.

4. Attach a power supply to the

camcorder.

5. Slide the camcorder’s POWER switch

upward to turn on the camcorder.

B. Camcorder connected to the VCR

that is already connected to TV:

Turn on VCR and tune it to the

channel you want to record (or

place the cassette you want to

copy in the VCR).

6. Press the VCR/CAM button to place

the camcorder in playback. The green

VCR indicator will light.

7. Press the REC button on the

camcorder (located under the

viewfinder) to begin recording.

2. Place the camcorder’s audio/video IN

If you are copying a tape, press PLAY

on the VCR when you are ready to

start copying.

OUT switch to IN.

3. Place the tape you want to record on

(with safety tab open) into the

camcorder.

8. Press STOP when you are finished.

Playback

Viewfinder Playback and Features

Viewfinder playback is the simplest way to watch tapes using the camcorder.

VCR(PLAY)/CAM Button

and Indicators

DISPLAY BLANK REC

REW

PLAY F FWD

STOP PAUSE

REW

Button

FFWD

Button

PLAY

Button

EJECT

STOP

Button

EJECT

Button

Viewfinder Playback

1. Slide the POWER switch upward to

4. Press PLAY to begin playback.

During playback, use the playback

features described on the next page.

turn on the camcorder.

2. Press the VCR(PLAY)/CAM button to

put the camcorder in the playback

mode. The green VCR(PLAY)

indicator will light.

5. Press STOP when you are finished.

3. Press EJECT and insert the cassette

you want to play back. Close the

cassette compartment.

Playback

ZOOM

DISPLAY

REC

COUNTER

MEMORY RESET

STOP

Button

STOP

REW

PLAY

Button

REW

F FWD

Button

PAUSE

Button

Remote

Playback Features

Visual Searching

Tape Positioning

• To visually search forward on the tape

during playback or play pause, press

and hold F FWD. Release the button to

return to normal playback.

1. Slide the POWER switch upward to

turn on the camcorder.

2. Press the VCR(PLAY)/CAM button to

put the camcorder in the playback

mode. The green VCR(PLAY)

indicator will light.

• To visually search in reverse on the

tape during playback or play pause,

press and hold REW. Release the

button to return to normal playback.

3. Press and quickly release REW or

F FWD to rewind or fast-forward the

tape.

4. Press STOP to stop the tape.

Stop-Action Pause

• During playback, press PAUSE to “stop

the action” and view one frame of the

tape.

Caution: Pause is designed for

momentary interruptions and should not

be used for an extended period of time. If

the camcorder remains in pause for more

than three minutes, it will automatically

enter the stop mode and then turn off to

prevent excessive tape wear.

• Press PLAY or PAUSE to return to

normal playback.

Playback

Model Pro848 Only: Playback on TV (or VCR) with

AUDIO/VIDEO IN Jacks

To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,

you will need the supplied audio/video cable. If your TV is already connected to a

VCR, you can attach the camcorder to the VCR and watch what the camcorder is

recording or playing on the TV.

Yellow Video Plug

Back of

White and Red

Stereo VCR or

TV Monitor

Audio

Plugs

Audio/Video

Cable

AUDIO

VIDEO

White and Red

Audio

Plugs

Yellow

Video

Plug

VIDEO

Back of

Mono VCR or

TV Monitor

Audio/Video IN/OUT Switch

AUDIO

OUT

Yellow Video Plug

White and Red

Audio

Plugs

AUDIO

Audio and Video Jacks

Located Behind A/V Cover

Optional

Y-Adapter

VIDEO

White and Red

Audio

Plugs

Yellow Video Plug

Audio/Video

Cable

Installation

other end of the audio/video cable to

the white and red AUDIO L and R

jacks (located behind the A/V cover)

on the side of the camcorder.

1. Attach the white and red plugs on one

end of the audio/video cable to the red

and white AUDIO IN jack on the TV

(or VCR).

Notes: If your TV (or VCR) only has one

AUDIO IN, you may need an optional Y-

adapter to hear both channels.

4. Attach the yellow plug to the yellow

VIDEO jack on the camcorder.

5. Place the audio/video IN/OUT switch

(located on the side of the camcorder)

in the OUT position.

2. Attach the yellow plug to the VIDEO

IN jack on the TV (or VCR).

3. Attach the white and red plugs on the

(continued on next page)

Playback

Playback Operation and How to Copy Tapes on the VCR

1. A. Camcorder connected directly to

TV: Turn on the TV and tune it to

the video input channel.

4. Press PLAY

• During playback, use the playback

features on page 35.

B. Camcorder connected to VCR that

is already connected to TV: Turn

on VCR and place it in the “line” or

“camera mode”. (If your VCR does

not have a “line” or “camera

5. To copy what the camcorder is playing,

place a blank cassette in the VCR, and

press the VCR’s RECORD button.

Note: Make sure the memory-stop feature

is turned off (press COUNTER MEMORY

on the remote control) or the camcorder

will enter play pause when the counter

reaches M 0:00:00.

mode”, consult the VCR owner’s

manual.) Operate the TV as you

normally do to see the signal

coming from the VCR.

6. Press STOP when you are finished.

2. Slide the POWER switch upward to

turn on the camcorder.

3. Press the VCR(PLAY)/CAM button to

put the camcorder in the playback

mode. The green VCR(PLAY)

indicator will light.

Caution: The unauthorized recording

of copyrighted material may infringe

the rights of others.

Viewing What the Camcorder is Seeing (or Recording)

1. A. Camcorder connected directly to

TV: Turn on the TV, and tune it to

the video input channel.

2. Slide the POWER switch upward to

turn on the camcorder. The red CAM

indicator will light.

Note: When the camcorder is used as a

camera, turn the TV’s volume down to

prevent a high-pitched squeal caused by

feedback.

B. Camcorder connected to VCR that

is already connected to TV: Turn

on VCR and place it in the “line” or

“camera mode”. (If your VCR does

not have a “line” or “camera

3. Press the thumb trigger to begin

recording. You can watch what the

camcorder is seeing (or recording) on

the TV screen.

mode”, consult the VCR owner’s

manual.) Operate the TV as you

normally do to see the signal

coming from the VCR.

Notes: The remote control will operate the camcorder.

Press the DISPLAY button to have the camcorder’s displays appear on the TV screen. During

tape copying, these displays will be recorded when they appear on the TV screen.

Playback

Models Pro842 and Pro847 Only: Playback on TV (or VCR) with

AUDIO/VIDEO IN Jacks

To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,

you will need the supplied audio/video cable. If your TV is already connected to a

VCR, you can attach the camcorder to the VCR and watch what the camcorder is

recording or playing on the TV.

Back of

Yellow Video Plug

Mono VCR or

TV Monitor

White

Audio

Plug

Audio/Video

Cable

AUDIO

VIDEO

White

Audio

Plug

Yellow

Video

Plug

Audio and Video Jacks

Located Behind A/V Cover

Back of

Stereo VCR or

TV Monitor

Yellow Video Plug

White

AUDIO

Audio

Plug

VIDEO

White

Audio

Plug

Optional Y-Adapter

(such as AH25)

Audio/Video

Cable

Yellow Video Plug

Installation

3. Attach the white plug on the other end

of the audio/video cable to the

1. Attach the white plug on one end of

the audio/video cable to the AUDIO

IN jack on the TV (or VCR).

A (audio) jack (located behind the A/V

cover) on the side of the camcorder.

Notes: If your TV (or VCR) has stereo

AUDIO IN jacks, attach the plug to the one

labeled MONO. If one is not labeled

MONO, you may need a Y-adapter, such

as AH25, shown on page 43 to hear both

channels.

4. Attach the yellow plug to the yellow

V (video) jack on the camcorder.

2. Attach the yellow plug to the VIDEO

IN jack on the TV (or VCR).

Playback

Playback Operation and How to Copy Tapes on the VCR

1. A. Camcorder connected directly to

TV: Turn on the TV and tune it to

the video input channel.

4. Press PLAY

• During playback, use the playback

features on page 35.

B. Camcorder connected to VCR that

is already connected to TV: Turn

on VCR and place it in the “line” or

“camera mode”. (If your VCR does

not have a “line” or “camera

5. To copy what the camcorder is playing,

place a blank cassette in the VCR, and

press the VCR’s RECORD button.

Note: Make sure the memory-stop feature

is turned off (press COUNTER MEMORY

on the remote control) or the camcorder

will enter play pause when the counter

reaches M 0:00:00.

mode”, consult the VCR owner’s

manual.) Operate the TV as you

normally do to see the signal

coming from the VCR.

6. Press STOP when you are finished.

2. Slide the POWER switch upward to

turn on the camcorder.

3. Press the VCR(PLAY)/CAM button to

put the camcorder in the playback

mode. The green VCR(PLAY)

indicator will light.

Caution: The unauthorized recording

of copyrighted material may infringe

the rights of others.

Viewing What the Camcorder is Seeing (or Recording)

1. A. Camcorder connected directly to

TV: Turn on the TV, and tune it to

the video input channel.

2. Slide the POWER switch upwards

toward POWER. The red CAM

indicator will light.

Note: When the camcorder is used as a

camera, turn the TV’s volume down to

prevent a high-pitched squeal caused by

feedback.

B. Camcorder connected to VCR that

is already connected to TV: Turn

on VCR and place it in the “line” or

“camera mode”. (If your VCR does

not have a “line” or “camera

3. Press the thumb trigger to begin

recording. You can watch what the

camcorder is seeing (or recording) on

the TV screen.

mode”, consult the VCR owner’s

manual.) Operate the TV as you

normally do to see the signal

coming from the VCR.

Notes: The remote control will operate the camcorder.

Press the DISPLAY button to have the camcorder’s displays appear on the TV screen. During

tape copying, these displays will be recorded when they appear on the TV screen.

Playback

Playback on a TV Without Audio/Video Inputs

To connect your camcorder to a TV without audio/video inputs, you will need an

optional CRF800 output adapter and an optional coaxial RF cable, such as VH82 or

VH90 shown on pages 42-43. If your TV has AUDIO and VIDEO IN jacks (or is

connected to a VCR), refer to pages 36-39.

VHF

Back of TV

FROM

ANT

Optional

RF Coaxial

Cable

(such as VH82

or VH90)

Optional

Transformer

(Such as VH54)

VHF

Back of TV

CHANNEL

4CH/3CH

Switch

VHF Antenna

Optional

CRF800 RF

Output Adapter

Optional 300-75 Ohm

Transformer

VHF Antenna

Installation

Note: If your TV has 300 ohm screw

terminals, you will need a 75/300 ohm

transformer, such as VH54, shown on

page 43.

1. Disconnect the VHF antenna from

your TV. Connect the antenna to the

connector on the RF output adapter as

shown above if you are going to leave

the adapter connected to the TV.

3. Attach the RF output adapter’s plug

to the audio, RF out, and video jacks

(located under the A/V cover) on the

side of the camcorder.

Note: If your VHF antenna is the flat

twin-lead type attached by two screws,

you will also need an optional 300/75 ohm

transformer.

4. Model Pro848 Only: Make sure the

audio/video IN/OUT switch on the

side of the camcorder is in the OUT

position.

2. Attach one end of the optional coaxial

RF cable to the other connector on the

adapter, and attach the other end to the

VHF input on your TV as shown.

Playback

Playback Operation

5. Press VCR(PLAY)/CAM button to

place the camcorder in the

1. Set the CHANNEL 4CH/3CH switch

on the RF output adapter to

VCR(PLAY) mode. The green

VCR(PLAY) indicator will light.

CHANNEL 4CH or 3CH.

2. Turn on the TV, and tune it to the

same channel you selected with the

RF output adapter’s CHANNEL

switch.

6. Press PLAY.

• During playback, use the playback

features described on page 35.

3. Attach a power supply and turn on the

camcorder.

7. Press STOP when you are finished.

4. Insert a tape.

Viewing What the Camcorder Is Seeing or Recording

3. Press VCR(PLAY)/CAM button to

1. Turn on the TV and tune it to channel

3 or 4. When the camcorder is used as

a camera, turn the TV’s volume down

to prevent a high-pitched squeal

caused by feedback.

2. Set the CHANNEL 4CH/3CH switch

on the RF output adapter to the same

channel you selected on the TV.

place the camcorder in the CAM

mode. The red CAM indicator will

light.

4. Press the thumb trigger to begin

recording. You can watch what the

camcorder is seeing (or recording) on

the TV screen.

Notes: The remote will also operate the camcorder.

Press the DISPLAY button to have the camcorder’s displays appear on the TV screen.

Normal TV Viewing

For normal TV viewing, you may leave

the RF output adapter hooked up to the

TV. Disconnect the adapter plug from

the camcorder or turn off the camcorder.

Note to Cable TV Installer

This reminder is provided to call your attention to Article 820-40 of the

National Electrical Code (Section 54 of Canadian Electrical Code, Part I),

that provides guidelines for proper grounding and, in particular, specifies

that the cable ground shall be connected to the grounding system of the

building as close to the point of cable entry as practical.

Optional Accessories

We invite you to take a look at some great ideas for sparking creativity

and adding to the fun of using your compact VHS camcorder. The

following pages have a selection of accessories to help make your

memorable moments look and sound even better.

These accessories are designed to make the process of recording and

watching your videos more enjoyable.

To order accessories, contact your local Dealer.

If a dealer is not nearby, all accessories are available through toll-free

ordering or by using the order form on page 45.

Coaxial RF Cables

AC201A Soft Carrying Case

VH82 (6-ft)

VH90 (12-ft)

These RF cables are used with the RF

output adapter to connect your camcorder

to a standard TV (one without

audio/video input jacks) for playback.

If your TV has 300 ohm antenna screw

terminals, you will need an optional

75-to-300 ohm transformer such as

VH54. If your antenna cable is the flat

twin-lead type attached by two screws,

you will also need an optional 300-to-75

ohm transformer.

Custom compact soft case designed

especially to provide protection and utility

for your compact VHS camcorder and

most accessories. Rugged fabric lined

with soft non-abrasive material and

generous padding. Has adjustable

dividers for custom fit for lens filters,

adapters, batteries, and tapes.

All specifications and descriptions of accessories are subject to change without notice.

Optional Accessories

CRF800 RF Output Adapter

CPS801C AC Adapter/Charger

This adapter is used with a coaxial RF

cable to connect your camcorder to a

standard TV (one without audio/video

This adapter/ charger and the optional

DCC100 DC cable enable you to operate

your camcorder directly from standard

household power. It operates on 100-240

volts, 50/60H.

VH54 Cable Transformer

It will also charge the 234330 and 234329

battery.

This 75-to-300 ohm transformer is used to

connect a standard 75-ohm antenna cable

(such as VH82 or VH90) to the 300 ohm

screw terminals on a TV.

Caution: Do not use any other

adapter/chargers with this camcorder.

DCC100 DC Cable

This DC cable lets you connect the

CPS801C AC adapter/charger or the

DCC05 DC car cord adapter/charger

directly to the camcorder.

AH25 Y-Adapter

This Y-adapter allows you to connect

your camcorder’s mono audio cable to a

stereo TV or VCR.

Optional Accessories

Using the Optional AC088 Tripod

Mounting the camcorder on a tripod, such as AC088, will keep the camcorder steady

and produce excellent video results.

This tripod’s fluid-effect head provides smooth camera pan and tilt. The quick-release

mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section

leg design folds down to 26" when not in use. Rubber feet allow for sure footing.

Cautions: Before using a tripod, make sure it is stable enough to hold the camcorder

without falling over. Do not transport the camcorder attached to the tripod.

When attaching your camcorder to a tripod, be careful not to force the tripod screw

into the camcorder’s tripod mounting hole.

The tripod screw should not protrude into the camcorder more than approximately

three-eighth (3/8) inch. Forcing the screw could damage the mounting hole on the

bottom of the camcorder.

All specifications and descriptions of accessories

are subject to change without notice.

Accessory Order Form

Order Form for Camcorder Models Pro842/Pro847/Pro848

Description

Part No.

AC088

AC201A

AH25

Price

$ 39.95

Qty. Total

Super Lightweight Tripod

Soft Camcorder Case

Y-Adapter

2.95

AC Adapter/Charger

and

CPS801C $118.75

DC Cable

DCC100

$ 12.95

$ 59.95

RF Output Adapter

CRF800

VH54

VH82

VH90

213004

75-300 Cable Transformer

Coaxial RF Cable (6 Feet)

Coaxial RF Cable (12 Feet)

Shoulder Strap

Audio/Video Cable (Pro842/Pro847) 217496

AC Adapter 221424

Stereo Audio/Video Cable (Pro848) 233194

Remote Control

Rechargeable Battery

2.95

6.95

7.95

$ 12.95

$ 18.45

$ 104.85

$ 17.60

$ 36.85

$ 45.95

$ 49.95

233195

234329

234330

Prices are subject to change without notice.

Total Merchandise...........................................................$__________

Sales Tax.........................................................................$__________

We are required by law to collect the appropriate

sales tax for each individual state, county, and

locality to which the merchandise is being sent.

Shipping and Handling....................................................$

5.00

Total Amount Enclosed ................................................$__________

Use VISA, MasterCard, or Discover.

Money order or check must be in U.S.

currency only. No COD or cash.

Please make sure that both sides of this form

have been filled out completely.

• Allow 4 weeks for delivery.

• All accessories are subject to availability.

Please complete other side also

Accessory Order Form

Charge your order on your VISA,

MasterCard, or Discover Card by

filling in below

USE YOUR CREDIT CARD

IMPORTANT: Copy complete account number

from your VISA card

My card expires:

IMPORTANT: Copy complete account number

from your MasterCard

Copy Number

above your

name on

My card

expires:

MasterCard

IMPORTANT: Copy complete account number

from your Discover Card

My card expires:

AUTHORIZED SIGNATURE

Prices are subject to change without notice.

Print or type your name and

address clearly. This will be

your mailing label.

A complete and correct

order will save you days

of waiting.

Name:

Street:

Apt:

City:

State:

Zip:

Accessory Order Form

To order accessories, contact your local Dealer.

If a dealer is not nearby, you can also follow the directions below to order by

telephone or direct-by-mail.

United States and Canada Orders

To place your order by phone, have your Visa, MasterCard, or Discover card

ready and call the toll-free number listed below between 8AM and 8PM (EST)

Monday through Friday or between 9AM and 5PM (EST) Saturday.

Use this number only to place an order for accessory items listed on

this order form.

1 – 800 – 338 – 0376

To place your order by mail, detach and mail the completed order form with

credit card information, money order, or check in U.S. currency (made payable

to Thomson Consumer Electronics, Inc.) to the following address:

Video Accessories

PO Box 8419

Ronks, PA 17573

Care and Maintenance

Cleaning the Camcorder

To clean the camcorder’s exterior,

remove any power source connected to

the camcorder and gently wipe it with a

clean soft cloth.

Caution: Use of strong cleaning

products, such as those containing

alcohol or benzine, may damage

the camcorder.

Cleaning the Camcorder’s Lens

To clean the camcorder’s lens, blow it with a blower brush, and then

gently wipe the lens with cleaning tissue and commercially prepared

cleaning solution designed for use on camera lens. Improper cleaning

may scratch the lens.

Caution: Do not

touch the lens with

your fingers. The

Lens

oil from your skin

can damage the

lens.

Cleaning the Camcorder’s Viewfinder

The viewfinder eyepiece can be removed for cleaning.

1. Turn the eyepiece counterclockwise

and pull it out.

2. Remove dust using a blower brush.

3. Reattach the eyepiece and turn it

clockwise until it clicks.

Care and Maintenance

Proper Care and Storage

• The camcorder can be damaged by

improper storage or handling. Do not

subject the camcorder to swinging,

shaking, or dropping.

• Keep dust and grit from entering the

camcorder’s cassette door. Dust and

grit are abrasive and will cause

excessive wear to both the camcorder’s

recording/playback heads and cassettes.

• Do not store the camcorder in

temperatures below -22°F (-30C) or

above 149°F (65C).

• Always replace the lens cap when the

camcorder is not in use.

• When the camcorder is not in use,

always remove the cassette and

AC adapter or battery.

• Before handling your camcorder, make

sure your hands and face are free from

any chemical products such as suntan

lotion, as it may damage the finish.

• Retain the original carton for future

storage or shipping purposes.

Things to Avoid

• Do not operate the camcorder near the

ocean as salt water or salt water spray

may damage the internal parts of the

camcorder.

• Do not operate the camcorder for

extended periods in temperatures below

40°F (4C) or above 95°F (35C).

• Do not expose the camcorder or adapter

to rain or moisture. If either component

becomes wet, turn off the power and

take the unit to an Authorized RCA

Camcorder Servicenter.

• Do not use an adapter, adapter/charger,

or batteries other than the ones

specified for the camcorder. Use of the

wrong accessories may cause damage

to the camcorder.

• Do not attempt to disassemble your

camcorder. There are no user-

serviceable parts inside.

• Avoid operating your camcorder

immediately after moving it from a cold

location to a warm location. Give the

camcorder 1-1/2 to 2 hours to reach a

stable temperature before inserting a

cassette. When the camcorder is

moved from cold to warm,

condensation may cause the tape to

stick to the headwheel and damage the

headwheel or tape.

• Do not aim your camcorder at the sun

or other bright objects.

• Do not leave your camcorder in direct

sunlight for extended periods of time.

The resulting heat buildup could

permanently damage the camcorder’s

internal parts.

• Do not operate the camcorder in

extremely humid environments.

Trouble Checks

Troubles sometimes are caused by simple “faults” that you can easily correct without

the help of a service technician by first checking a few basic remedies.

Before you call or take your camcorder to an Authorized RCA Camcorder Servicenter,

look below for the type of trouble you are experiencing. Then perform the simple

checks and adjustments listed for that trouble.

If service should be necessary, the warranty information lists what your warranty

covers and explains how to get service.

Trouble

Checks and Adjustments

No power

• Slide the POWER switch upward to turn on the camcorder.

• If using rechargeable battery, it may need to be recharged.

• If using AC adapter or AC adapter/charger, make sure it is

plugged into a working outlet.

• If using “AA” batteries, they may need to be replaced.

Won’t record or

playback

• If the dew indicator ( ) flashes in the viewfinder, there is

moisture in the camcorder. Wait until the dew indicator no

longer appears before operating the camcorder.

• Make sure VCR(PLAY)/CAM button is in the

CAM (camera) or VCR(PLAY) mode. (See page 5.)

• There may not be a cassette in the camcorder.

• Try ejecting and reinserting the cassette.

• The cassette tape may be broken, try another cassette.

• You may have reached the end of the cassette, try

rewinding it.

Won’t playback

Won’t record

• VCR(PLAY)/CAM button must be in VCR(PLAY) mode.

• Safety tab has been closed. (See page 18.)

• VCR(PLAY)/CAM button must be in CAM (camera) mode.

No picture

• Remove lens cap.

Camcorder turns

itself off

• Slide POWER switch upward to turn the camcorder back

on. If camcorder is left in record pause or play pause for

three minutes, it will turn itself off to prevent tape wear.

Trouble Checks

Trouble

Checks and Adjustments

• Aim remote at camcorder’s remote control sensor.

• Remote’s lithium cell battery may be installed incorrectly.

See page 14.

Camcorder does not

respond to remote

control

• Remote control’s lithium cell battery may need replacing.

• Remote control sensor on camcorder exposed to direct

sunlight or strong artificial light.

• Time-counter memory may be on. Whenever an “M”

appears with the time-counter display, the camcorder will

stop rewinding (or fast forwarding) when counter reads M

0:00:00. Press REW or FFWD again to continue rewinding

or fast forwarding, or press COUNTER MEMORY on the

remote to turn off the memory-stop feature.

Tape stops during

rewind or fast

forward

• Press PLAY or PAUSE to return to normal playback.

Camcorder remains

in pause mode

• Subject was too far from camcorder.

• Model Pro848 Only: Attach an external microphone.

See “Specifications” on page 56 for proper type.

Sound is too low or

distorted

• Subject is not in center of viewfinder or two subjects are

at different distances. Use the focus lock feature.

See page 26.

Poor auto-focus

operation

• Lens is smudged, and image appears unfocused.

• Eyepiece focus control is misadjusted.

Viewfinder displays

are out of focus

• The small controls (B and C or F) on the bottom of the

viewfinder control the brightness and color (models

Pro848/Pro847) or focus (model Pro842) of the

viewfinder. These controls have been set at the factory

and should require no adjustment. If the brightness or

color (models Pro848/Pro847)/focus (model Pro842) of

the viewfinder ever does require adjustment, carefully

use a plastic screwdriver. Make the adjustments with

caution to prevent damaging the miniature controls.

(continued on next page)

Trouble Checks

Trouble

Checks and Adjustments

Date and/or time

were recorded on

tape

• Displays will be recorded on tape whenever they appear in

the viewfinder. Remove them from viewfinder when

recording. See page 29.

Date and/or time are

incorrect

• When AUTO DATE is selected, display will automatically

be recorded when you begin recording or change the

cassette. See page 29.

• Clock lithium cell battery may need replacing. See page 27.

• Date or time may need to be set. See page 28.

Vertical white lines

appear when shoot-

ing bright object

• This may occur when background extremely contrasts with

the subject.

Rechargeable

battery runs down

sooner than

• If battery has not been used for some time, completely drain

the battery’s power and then recharge it.

• Battery run times are measured when the camcorder is

recording continuously. You can check your battery by first

fully charging it and then aiming the camcorder at a clock

and recording the picture of the clock. When the recording

stops, play the last recorded section, and note the clock

time. A one-hour battery should give you about 60 minutes

of recording time. In practical use, you may not be able to

record for the full time because the camera uses battery

current when it is waiting between recordings (record

pause) and while you focus and zoom.

expected

Customer Assistance and Service

Thomson provides a toll-free telephone

You can reach Thomson at the

following number:

number to help you with any problems

you may encounter with your camcorder.

Many can be diagnosed over the phone,

and if necessary, a replacement unit can

be shipped to you. Please have your

camcorder model/serial number and date

of purchase ready when you call. If your

unit is out of warranty, we will quote the

cost of an exchange unit to you.

800-283-6503

(Toll free inside U.S.A.)

Our toll-free Camcorder number

operates from 8 a.m. to 5 p.m., CST

Monday – Friday

for U.S. customers only

Returning equipment to Thomson for repair or exchange

If we are unable to resolve your problem

over the phone, we will gladly service

your unit or exchange it for a new or

refurbished camcorder. Refer to the

limited warranty on the reverse side to

learn about your specific rights and

responsibilities.

Always consult Thomson and get a

Return Authorization number before

returning anything! Obtain a Return

Authorization (RA) number from the

telephone representative before returning

your equipment to avoid delays,

accounting errors, or even loss of your

unit.

Important information to customers who ship defective equipment to

Thomson Consumer Electronics

The Thomson representative who

authorized the return of your equipment

will give you an RA number over the

phone. They will also provide you with

instructions on where and how to return

your camcorder. Write the number in

large, clear characters on the outside of

the box. To avoid confusion and

misunderstandings, shipments without an

RA number clearly visible on the outside

of the box will be returned to you at your

expense.

camcorder. These numbers are located

on the bottom of your unit. If your

camcorder is within the warranty period,

please provide a copy of the bill of sale

to verify purchase date. Use the original

box and packing material to protect the

equipment from damage in shipment.

For your protection, insure all shipments

for full replacement value and use a

reliable shipper. Thomson assumes no

responsibility for warranty shipments

from the customer to the factory if not

shipped in the manner prescribed by

Thomson.

Include a brief note describing the

problem and any conversations about the

problem you have had with Thomson

personnel. Include your name, address

and model/serial number of your

Limited Warranty

What your warranty covers:

• Any defect in materials or workmanship.

3. Take your unit, including all

accessories, and your evidence of

purchase date, such as a bill of sale, to

the exchange location and you will be

provided the new or refurbished unit.

4. If the repairs were covered by your

warranty, you will not be billed.

For how long after your purchase:

• 90 days for labor charges.

• One year for parts.

(The warranty period for rental units

begins with the first rental or 45 days

from date of shipment to the rental firm,

whichever comes first.)

If you are not located near an exchange

point:

1. Provide your Discover, MasterCard or

Visa account number and expiration

date to our phone representative. This

is for security purposes. If we receive

your unit including all accessories

within 14 days from the date you were

provided a Return Authorization

number, only items not covered by

warranty will be charged to your

account. IF YOUR UNIT

What we will do:

During the initial 90 days

• Exchange your camcorder with a new

or refurbished unit, or repair your

camcorder. The option will be ours.

There will be no cost to you.

After the 90 days and within one year

• Exchange your camcorder with a new

or refurbished unit, or repair your

camcorder. The option will be ours.

Parts will be provided at no charge,

but you will be responsible for the cost

of labor required for the repair.

INCLUDING ALL ACCESSORIES

IS NOT RECEIVED WITHIN 14

DAYS, THE SUGGESTED

RETAIL VALUE OF THE

CAMCORDER AND/OR

How you get service:

• Call 1-800-283-6503 and have your

unit’s date of purchase and

ACCESSORIES WILL BE

CHARGED TO YOUR CREDIT

CARD. This amount will be credited

if the unit is subsequently received.

2. We will send you a replacement unit

next business day delivery in the

continental USA.

3. You will receive an invoice packed

with the replacement product, but will

not be charged for the unit portion of

the invoice amount if we receive your

unit including all accessories within

14 days from the date you were

provided the RA number. Any labor

and parts charges not covered by the

warranty will be included and charged

against your account.

model/serial number ready. The

model/serial number information is on

the bottom of your camcorder.

• A representative will troubleshoot

your problem over the phone. If the

representative determines that you

should receive a replacement unit, you

will be provided with a Return

Authorization (RA) number and the

location of a nearby exchange point if

one exists. No returns will be

accepted without the RA number.

To receive a replacement camcorder

before you return yours:

If you are located near an

exchange point:

1. We will send a replacement unit to the

exchange point next business day

delivery in the continental USA.

2. The exchange location will notify you

of its arrival.

4. Ship the unit back to us along with all

accessories included with your

camcorder using the replacement

unit’s carton. Shipping instructions

will be included in the carton along

with your RA number, which will

Limited Warranty

allow you to easily ship the unit back

to us. Make sure you insure your

shipment in case of damage or loss.

Include with the shipment:

• Evidence of purchase date, such as

a bill of sale, to verify your unit’s

warranty eligibility.

• A brief note describing your

camcorder’s problem.

• Your name, address and phone

number.

To have your Camcorder repaired by

an Authorized RCA Camcorder

Servicenter:

• Check with your dealer or call 1-800-

336-1900 for the Authorized RCA

Camcorder Servicenter nearest you.

• Take your unit to the Authorized RCA

Camcorder Servicenter of your choice.

• Show the Authorized RCA Camcorder

Servicenter representative evidence of

purchase date, such as a bill of sale.

• Pick up your camcorder when repairs

are complete.

Return transportation, storage, handling

and insurance costs are your sole

responsibility. We accept no liability in

case of damage or loss.

What your warranty does not cover:

• Adjustment of customer controls.

• Damage from misuse or neglect.

• A unit that has been modified or

incorporated into other products or is

used for institutional or other

commercial purposes.

To receive a replacement unit after we

have received your unit:

1. Write the RA number on the outside of

the carton used to return the unit.

Make sure you insure your

shipment in case of damage or loss.

2. Carefully pack the unit along with all

accessories included with your

camcorder, using the original box and

packing material if possible.

3. Include with the shipment:

• Evidence of purchase date, such as a

bill of sale, to verify your unit’s

warranty eligibility.

• Batteries.

• Cleaning of video/audio heads.

• Camcorders purchased or serviced

outside the U.S.A.

• Return transportation, storage and

handling costs of your unit,

including insurance for loss or

damage.

• Acts of God, such as but not limited to

lightning damage.

• A brief note describing your

camcorder’s problem.

• Your name, address and phone

number.

Product Registration:

• Please complete and mail the Product

Registration Card packed with your

camcorder. It will make it easier to

contact you should it ever be

Return transportation, storage, handling

and insurance costs are your sole

responsibility. We accept no liability in

case of damage or loss.

4. Include a cashier’s check or money

order for payment if there are any out

of warranty labor or parts charges

which were indicated by the

representative, and you elected not to

use your credit card.

5. Upon receipt of your product, a new or

refurbished unit will be shipped to you

next day delivery in the continental USA.

necessary. The return of the card is

not required for warranty coverage.

How State Law relates to warranty:

• This warranty gives you specific legal

rights and you may have other rights

that vary from state to state.

If you purchased your Camcorder

outside the United States:

• This warranty does not apply. Contact

your dealer for warranty information.

Specifications

Camcorder

Television system: NTSC, EIA

Video recording system: Rotating 2-head, helical-scan system

Audio recording system: Rotating head

Pro842/Pro847: FM system

Pro848: FM stereo system

Cassette type: 8 mm video cassette tape

Tape speed: SP mode - Approx. 14.345 mm/sec.

Maximum recording time: 120 minutes (P6-120 cassette)

Fast forward/Rewind time: Approximately 6.5 minutes (P6-60 cassette)

Image Sensor: CCD solid-state type (270,000 pixels)

Viewfinder: Pro842: 0.6 inch electronic B/W viewfinder

Pro847/Pro848: 0.55 inch electronic color viewfinder

Lens: 15x zoom F1.4-2.6 (f = 4.0 to 60mm)

Focus: Fuzzy logic auto focus

White balance: Fuzzy logic auto white balance

Iris: Fuzzy logic auto iris

Power supply: 6V Ni-Cd battery pack

6.5V - Optional AC adapter/charger (CPS801C)

9V - Alkaline batteries (6 - “AA”), AC adapter (221424)

Power consumption: Pro842: 4.8W, Pro847: 5.4W, Pro848: 5.6W (during recording)

Operating temperature range: 32°F to 104°F (0°C to 40°C)

Storage temperature range: -4°F to 140°F (-20°C to 60°C)

Dimensions (W x H x D): Approx. 225 x 106 x 108 mm

Weight (excluding battery and tape): Pro842 and Pro848: Approx. 0.79Kg

Pro847: Approx. 0.78Kg

External microphone jack: Pro848 Only: -66dBs, stereo mini jack

Video output terminal: Video output 1 Vp-p, 75 ohms unbalanced, negative sync

Audio output terminal: Audio output –7dBs, 2.2 kohms or less

AC Adapter

Rated output: 9V, 0.8A

Power requirement: AC 100V - 240V, 50/60 Hz

Power consumption: 10W

Dimensions (W x H x D): Approx. 65 x 32 x 49 mm

Weight: Approx. 100g

All specifications are subject to change without notice.

Information to User

interference by one or more of the

following measures:

This equipment has been tested and

found to comply with the limits for a

Class B digital device and RF lighting

device, pursuant to Part 15 and Part 18 of

the FCC Rules. These limits are

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

designed to provide reasonable protection

against harmful interference in a

• Connect the equipment into an outlet on

a circuit different from that to which

the receiver is connected.

residential installation. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and

used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur

in a particular installation. If this

• Consult the dealer or an experienced

radio/TV technician for help.

Alterations or modifications carried out

without appropriate authorization may

invalidate the user’s FCC right to operate

the equipment.

equipment does cause harmful

interference to radio or television

reception, which can be determined by

turning the equipment off and on, the

user is encouraged to try to correct the

This Class B digital apparatus meets all requirements of the

Canadian Interference — Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les

exigences du Réglement sur le matériel brouilleur du Canada.

Index

— A —

— C —

A/V (Audio/Video)

CAM/VCR(PLAY) Button and

Jacks . . . . . . . . . . .6,32-33,36,38,40

AV IN/OUT Switch (Model

Indicators . . . . . . . .5,6,19,24,26,30

. . . . . . . . . . . . . . . . .34-35,37,39,41

Camcorder, Cleaning . . . . . . . . . . . . .48

Camcorder Controls . . . . . . . . . . . . . . .6

Camcorder, Turning On . . . . . . . . . . . .5

Camcorder, Unpacking . . . . . . . . . . . .2

Camera Edit . . . . . . . . . . . . . . . . . . . .24

Care and Maintenance . . . . . . . . .48-49

Care and Storage, Battery . . . . . . . . .10

Care and Storage, Camcorder . . . . . .49

Cassette Compartment . . . . . . . . .5,6,18

Cassettes, Inserting and Removing .5,18

Cautions . . . . . . . . . .Inside Front Cover

Cell, Installing in Remote . . . . . . . . .14

Charging the Battery . . . . . . . . . . . . . .9

Checking Problems . . . . . . . . . . . .50-52

Cleaning the Camcorder . . . . . . . . . .48

Cleaning the Camcorder Lens . . . . . .48

Cleaning the Viewfinder . . . . . . . . . .48

Clock Cell, Installing and

Pro848 Only) . . . . . . .6,32-33,36,40

Accessories, Included . . . . . . . .2,45-47

Accessories, Optional . . . . . . . . . .42-47

Accessory, Order Form . . . . . . . .45-47

Adapter, Using . . . . . . . . . . . . . . . . .4,7

Adapter/Charger, Optional . . .12-13,43

Adjusting Handstrap . . . . . . . . . . . . . .3

Adjusting the Viewfinder . . . . . . . . .22

AE (Auto Exposure)

Indicators . . . . . . . . . . . . . .20-21,25

AE (Automatic Exposure) Control . .25

Assistance . . . . . . . . . .2,53,Back Cover

Attaching Lens Cap and Cord . . . . . . .3

AUTO DATE Indicator . . . . . .20-21,29

Automatic White Balance and Iris . . .23

— B —

Removing . . . . . . . . . . . . . . . . . . .27

Contents . . . . . . . . . . . . . . . . . . . . . . . .1

Controls on Camcorder . . . . . . . . . . . .6

Controls, Remote . . . . . . . . . . . . .16-17

Copying Tapes

(Model Pro848 Only) . . . .32-33,37

Copying Tapes (Models Pro842 and

Pro847 Only) . . . . . . . . . . . . . . . .39

Correcting the Date and Time . . . . . .28

COUNTER MEMORY

B (Bright) and C (Color) Controls

(Models Pro847 and Pro848

Only) . . . . . . . . . . . . . . . . . . . . .6,51

B (Bright) and F (Focus) Controls

(Model Pro842 Only) . . . . . . . .6,51

Batteries, Using “AA” . . . . . . . . . .4,11

Battery (AA) Safety Precautions . . . .11

Battery (Rechargeable)

Safety Precautions . . . . . . . . . . . . .8

Battery Care and Storage . . . . . . . . . .10

Battery Level Indicator . . . . . .10,20-21

BLANK Button . . . . . . . . . . . . . . . .6,24

BLANK Indicator . . . . . . . . . . . . .20,24

Blank Search Feature . . . . . . . . . . . . .24

Button . . . . . . . . . . . . . .16,30,37,39

COUNTER RESET Button . . . . . .16,30

Customer Assistance . .2,53,Back Cover

Index

— D —

— H —

Date and Time Display . . . . . .20-21,29

Date and Time, Recording . . . . . . . . .29

Date and Time, Setting . . . . . . . . . . .28

DATE/TIME Button . . . . . . . . . .6,28-29

DC IN Jack . . . . . . . . . . . . . . . . .4,6,7,9

Design Specifications . . . . . . . . . . . .56

Dew Indicator ( ) . . . . . . . . . . . . . .20

DISPLAY Button . . . . .6,16,23,37,39,41

Displays, Viewfinder . . . . . . . . . .20-21

Handstrap . . . . . . . . . . . . . . . . . . .3,6,19

Handstrap, Adjusting . . . . . . . . . . . . . .3

— I —

Important Safety Information

. . . . . . . . . . . . . .Inside Front Cover

IN/OUT Switch (Model

Pro848 Only) . . . . . . .6,32-33,36,40

Included Accessories . . . . . . . . .2,45-47

Inserting and Removing Cassettes .5,18

Install Clock Cell . . . . . . . . . . . . . . . .27

Install Cell in Remote . . . . . . . . . . . .14

Iris, Automatic . . . . . . . . . . . . . . . . . .23

— E —

EJECT Button . . . . . . . . . . . .6,18,19,34

Elapsed Time Counter . . . . . . . . .20-21

Erase Protection, Cassettes . . . . . . . .18

External MIC (Microphone)

Jack (Model Pro848 Only) . . . .6,23

Eyepiece Focus Control . . . . . . .6,19,22

Eyepiece, Removing . . . . . . . . . . . . .48

— L —

Lens . . . . . . . . . . . . . . . . . . . . . . . . .6,48

Lens Cap . . . . . . . . . . . . . . . . . . . . .3,19

Lens Cap Cord, Attaching . . . . . . . . . .3

Lens, Cleaning . . . . . . . . . . . . . . . . . .48

Limited Warranty . . . . . . . . . . . . .54-55

— F —

Fast Forward Operation . . . . . . . . . . .35

Features, Recording . . . . . . . . . . .22-31

Features, Playback . . . . . . . . . . . .34-35

FF Indicator . . . . . . . . . . . . . . . . . . . .20

F FWD (Fast Forward)

Button . . . . . . .6,16-17,19,24,34-35

First Recording . . . . . . . . . . . . . . . . . .5

First-Time Operation . . . . . . . . . . . .2-6

Flying Erase Head . . . . . . . . . . . . . . .23

FOCUS LOCK Button . . . . . . . .6,26,28

Focusing . . . . . . . . . . . . . . . . . . . . . . .26

FOCUSLOCK Indicator . . . . .20-21,26

Function Buttons, Remote . . . . . .16-17

— M —

M (Memory Stop) Indicator . .20-21,30

Maintenance and Care . . . . . . . . .48-49

Memory Stop Feature . . . . . . . . . . . .30

Microphone . . . . . . . . . . . . . . . . . . .6,23

— N —

No Cassette Indicator (

) . . . . . . .20

Note to Cable TV Installer . . . . . . . . .41

(continued on next page)

Index

— O —

— Q —

Operation, First-Time . . . . . . . . . . . .2-6

Optional Accessories . . . . . . . . . .42-47

Optional Plug Adapter . . . . . . . . . .7,13

Order Form, Accessory . . . . . . . .45-47

Quick Review Feature . . . . . . . . . . . .24

— R —

REC (Record) Button, Remote . . .16-17

REC Button (Model Pro848 Only) .6,33

REC Indicator . . . . . . . . . . . . . . . .19,20

REC START/STOP Button . . .5,6,19,24

Rechargeable Nickel Cadmium

Battery . . . . . . . . . . . . . . . . . . .8-10

Recording Features . . . . . . . . . . . .22-31

Recording, First . . . . . . . . . . . . . . . . . .5

Recording, Making a . . . . . . . . . . . . .19

Recording on the Camcorder

— P —

PAUSE Button . . . . . . . . . . . . .16-17,35

PAUSE Indicator . . . . . . . . . . . .5,19,20

Pause, Stop-Action . . . . . . . . . . . . . .35

Picture Search . . . . . . . . . . . . . . . . . .35

PLAY

Button .5,6,16-17,30,34-35,37,39,41

PLAY/CAM Button and

Indicators . . . . . . . .5,6,19,24,26,30

. . . . . . . . . . . . . . . . .34-35,37,39,41

Playback Features . . . . . . . . . . . . .34-35

Playback on a TV With AUDIO/

VIDEO IN Jacks (Model

Pro848 Only) . . . . . . . . . . . . .36-37

Playback on a TV With AUDIO/

VIDEO IN Jacks (Models

(Model Pro848 Only) . . . . . . .32-33

Recording Over Your Tapes . . . . . . .18

Recording the Date and Time . . . . . .29

Recording Times . . . . . . . . . . . . . . . .18

Recording Tips . . . . . . . . . . . . . . . . . .31

Registration Card

. . . . . . . . . . . . . .Inside Front Cover

Remote Control . . . . . . . . . . . . . .14-17

Remote Function Buttons . . . . . . .16-17

Remote Sensor . . . . . . . . . . . . . . . .6,15

Remote, Storing in Camcorder . . . . .15

Removing the Eyepiece for Cleaning 48

REW (Rewind) Button

Pro842 and Pro847 Only) . . . .38-39

Playback on a TV Without

Audio/Video Jacks . . . . . . . . .40-41

Playback, Viewfinder . . . . . . . . . . . .34

Plug Adapter, Optional . . . . . . . . . .7,13

Positioning the Tape . . . . . . . . . . . . .35

POWER Switch

. . . . . . .5,6,9,19,28,33,34-35,37,39

Powering Your Camcorder . . . . . . .7-14

Problem Solving . . . . . . . . . . . . . .50-52

Product Registration

. . . . . . . . . . . .5,6,16,19,24,30,34-35

REW Indicator . . . . . . . . . . . . . . . . . .20

Rewind Operation . . . . . . . . . . . . . . .35

RF OUT Jack . . . . . . . . . . . . . . . . .6,40

RF Output Adapter . . . . . . . . . . . .40,43

. . . . . . . . . . . . . .Inside Front Cover

PUSH Button . . . . . . . . . . . .6,7,8,11,13

— S —

Safety Information . .Inside Front Cover

Index

Safety Precautions, AA Batteries . . .11

Safety Precautions, Rechargeable

Tips, Traveling . . . . . . . . . . . . . . . . . .31

Traveling Tips . . . . . . . . . . . . . . . . . .31

Tripod, Using . . . . . . . . . . . . . . . . . . .44

Trouble Checks . . . . . . . . . . . . . . .50-52

Turn Off the Camcorder . . . . . . . . . . .5

Battery . . . . . . . . . . . . . . . . . . . . . .8

Safety Tab . . . . . . . . . . . . . . . . . . . . .18

Searching, Visual . . . . . . . . . . . . . . . .35

Sensor, Remote . . . . . . . . . . . . . . . . .15

Set the Time and Date . . . . . . . . . . . .27

Shoulder Strap . . . . . . . . . . . . . . . . .2,3

Shoulder Strap Holders . . . . . . . . . . .3,6

Shutter Speed Control, Automatic . . .25

Solving Problems . . . . . . . . . . . . .50-52

SP Speed . . . . . . . . . . . . . . . . . . . . . .18

Specifications . . . . . . . . . . . . . . . . . . .56

Status Displays . . . . . . . . . . . . . . . . . .20

STOP Button

— U —

Unpacking the Camcorder . . . . . . . . . .2

Using “AA” Batteries . . . . . . . . . . .4,11

Using Optional AC Adapter/

Charger . . . . . . . . . . . . . . .12-13,43

Using the Adapter . . . . . . . . . . . . . .4,7

. . . . . .5,6,16,30,33,34-35,37,39,41

STOP Indicator . . . . . . . . . . . . . . . . .20

Stop-Action Pause . . . . . . . . . . . . . . .35

Storage and Care . . . . . . . . . . . . . . . .49

Storing the Remote . . . . . . . . . . . . . .15

— V —

VCR(PLAY)/CAM Button and

Indicators . . . . . . . .5,6,19,24,26,30

. . . . . . . . . . . . . . . . .34-35,37,39,41

Video Cassettes . . . . . . . . . . . . . . . . .18

Viewfinder . . . . . . .6,19,20-21,22,34,48

Viewfinder, Cleaning . . . . . . . . . . . . .48

Viewfinder Displays . . . . . . . . . . .20-21

Viewfinder Operation . . . . . . . . . . . .22

Viewfinder Playback . . . . . . . . . .34-35

Visual Search . . . . . . . . . . . . . . . . . . .35

— T —

Tape Copying (Model Pro848 Only)

. . . . . . . . . . . . . . . . . . . . . . . .33,37

Tape Copying (Models Pro842 and

Pro847 Only) . . . . . . . . . . . . . . . .39

TAPE END Warning . . . . . . . . . . .20,23

Tape Positioning . . . . . . . . . . . . . . . .35

Tape Time Remaining

— W —

Display . . . . . . . . . . . . . . . .20-21,23

TAPE Warning . . . . . . . . . . . . . . . . . .20

Things to Avoid . . . . . . . . . . . . . . . . .49

Thumb Trigger . . . . . . . . . . . . . . . . .5,6

Time and Date Display . . . . . . . . . . .29

Time and Date, Recording . . . . . . . . .29

Time and Date, Setting . . . . . . . . . . .28

Time Counter Display . . . . . . .20-21,30

Time Remaining (Tape)

Warranty, Limited . . . . . . . . . . . .54-55

White Balance, Automatic . . . . . . . . .23

— Z —

ZOOM Buttons . . . . . . . . . . . . . . .16,25

Zoom Control . . . . . . . . . . . . . . .6,19,25

Zoom Indicator . . . . . . . . . . . . . . .20,25

Zooming . . . . . . . . . . . . . . . . . . . . . . .25

Display . . . . . . . . . . . . . . . .20-21,23

Times, Recording . . . . . . . . . . . . . . . .18

Tips, Recording . . . . . . . . . . . . . . . . .31

Need Assistance? We want to help!

U.S. Consumers:

Camcorder Exchange Warranty . . . . . .800-283-6503

Customer Service . . . . . . . . . . . . . . . . .800-336-1900

Accessories . . . . . . . . . . . . . . . . . . . . .800-338-0376

Canadian Consumers:

English . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0338

French . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0445

If your camcorder needs service, please

contact your dealer or the nearest Servicenter

from the yellow pages. Please do not send

any products to the Indianapolis address listed

in this manual or on the carton. This will only

add delays in service for your product.

10330 N Meridian Street

Indianapolis, IN 46290

1996 Thomson Consumer Electronics, Inc.

Trademark(s) Registered

Marca(s) Registrada(s)

Part Number 96-Pro842/Pro847/Pro848-1

RCA Camcorder EZ2120 series User Manual
Pioneer Car Stereo System 08118 65707 User Manual
Philips LR6PS32C User Manual
Peavey Electronics Car Speaker PV 15M User Manual
Panasonic NV DS30A User Manual
Orion HELICAL FINE FOCUSING ADAPTER 13025 User Manual
NexxTech 6500542 User Manual
KitchenAid Blender KSB755 User Manual
Kenwood KVT 522DVD User Manual
JVC LYT1995 001B M User Manual