Panasonic NV DS30A User Manual

Digital Video Camera  
Operating Instructions  
Model No.  
NV-DS30A  
NV-DS50A  
NV-DS50  
NV-DS30  
Card  
Before use, please read these instructions completely.  
VQT9695  
Controls and Components ..................................... 6 Index Search Functions....................................... 33  
Remote Controller.................................................. 8 Playback Digital Effect Functions........................ 34  
Power Supply....................................................... 10 Playing Back on Your TV .................................... 35  
Turning on the Movie Camera and Selecting  
Modes ............................................................... 12  
Using a Card ....................................................... 38  
Recording on a Card ........................................... 39  
Notes and Hints................................................... 46  
Cautions for Use.................................................. 50  
Before Requesting Repair  
(Problems and Solutions)................................. 54  
Explanation of Terms .......................................... 55  
Wind Noise Reduction Function........................... 24  
Specifications ...................................................... 58  
Recording in Natural Colours............................... 25  
Index.................................................................... 59  
Adjusting White Balance Manually....................... 25  
Manual Shutter Speed Adjustment ...................... 26  
Manual Iris Adjustment......................................... 27  
Manual Focus Adjustment.................................... 27  
Digital Effect Functions ........................................ 28  
3
Standard Accessories  
1)  
Illustrated on the left are accessories supplied with the Movie  
Camera.  
1) AC Adaptor, DC Input Lead and AC Mains Lead (l 10)  
2) Battery Pack (l 10)  
3) Remote Controller and Button-Type Battery (l 8, 9)  
4) Lens Cap (l 11)  
5) AV Cable (l 35, 36)  
6) Shoulder Strap (l 12)  
7) Digital Video Head Cleaner (l 52)  
8) SD Memory Card (NV-DS50 only) (l 38)  
9) Personal Computer Connection Kit (NV-DS30 only) (l 37)  
2)  
3)  
4)  
5)  
6)  
7)  
1~0) U~S~B C~on~ne~cti~on~Kit~(N~V-D~S~50~on~ly)~(l~43~) ~~~~~  
Optional Accessories  
1) AC Adaptor (VW-AD9A)  
2) Battery Pack (Lithium/CGR-D08S/CGR-D120/800mAh)  
3) Battery Pack (Lithium/CGP-D14S/CGP-D210/1400mAh)  
4) Battery Pack (Lithium/CGR-D16S/CGR-D220/1600mAh)  
5) Battery Pack (Lithium/CGP-D28S/CGP-D320/2800mAh)  
6) Battery Pack (Lithium/CGR-D53S/CGR-D815/5300mAh)  
7) Battery Pack (Lithium/CGA-D54S/5400mAh)  
8) Car Battery Charger (VW-KBD2E)  
9) Filter Kit (VW-LF43WE)  
10) Wide Conversion Lens (VW-LW4307ME)  
11) Tele Conversion Lens (VW-LT4314ME)  
12) Stereo Microphone (VW-VMS2E)  
13) Shoe Adaptor (VW-SK11E)  
14) Tripod (VZ-CT55E)  
15) Personal Computer Connection Kit (VW-DTA10A/VW-DTA9E)  
(NV-DS30 only)  
16) DV Editing Software with DV Interface Board (VW-DTM21E)  
17) DV Editing Software with DV Interface Card (VW-DTM22E)  
18) DV Editing Software (VW-DTM20E)  
19) DV Cable (VW-CD1E)  
The following is for the NV-DS50 model only.  
20) MultiMediaCard (VW-MMC8E/VW-MMC16E)  
21) SD Memory Card (RP-SD008/RP-SD016/RP-SD032/  
RP-SD064)  
22) PC Card Adaptor for SD Memory Card (BN-SDABPE)  
23) USB Reader Writer for SD Memory Card (BN-SDCAPE)  
Some optional accessories may not be available in some  
countries.  
8)  
NV-DS50  
9)  
NV-DS30  
10)  
NV-DS50  
4
Getting Started  
1
2
3
1
Charge the Battery. (l 10)  
Attach the Battery to the AC Adaptor.  
Connect the AC Mains Lead. (Charging starts.)  
When the Charge Lamp [CHARGE] goes off, the Battery is  
fully charged.  
2
3
Attach the Charged Battery to the Movie Camera.  
(l 10)  
Insert the Cassette. (l 12)  
Slide the 1 Lever to open.  
Insert the Cassette.  
Press the 2 Button to close the Cover.  
4
Turn the Movie Camera on and start recording.  
(l 12, 18)  
Set the 3 Switch to [CAMERA]. (The [POWER] Lamp lights  
up.)  
Press the 4 Button. (Recording starts.)  
Press the 4 Button again to pause the recording.  
Viewing What Has Been Recorded  
5
Switch to the VCR Mode, rewind the tape, and play  
the tape back. (l 30)  
TAPE  
EJECT  
PUSH CLOSE  
Set the 5 Switch to [VCR].  
1
2
Press the 6 Button. (Rewind the tape.)  
Press the 7 Button. (Playback starts.)  
Press the 8 Button. (Playback stops.)  
Turn the Movie Camera off. (l 12)  
Set the 9 Switch to [OFF].  
4
POWER  
6
4
3
VCR  
OFF  
CAMERA  
M-CARD  
5
M-DEL  
STILL/  
8 P-IN-P  
M-PLAY  
MULTI  
7
M-STOP  
6
BLC  
BLC  
5
VCR  
OFF  
CAMERA  
M-CARD  
9
6
5
Controls and Components  
1) Mode Selector Button [AUTO/MNL] (l 18, 25, 26, 27)  
2) Focus Button [FOCUS] (l 27)  
3) Video Light Button [LIGHT] (l 19)  
4) Super Image Stabilizer Button [SIS] (l 22)  
Playback Digital Image Stabilizer Button [P.B.DIS] (l 30)  
5) Fade Button [FADE] (l 22)  
6
9
1 2  
7
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
AUTO/MNL FOCUS  
MULTI  
SIS/  
P.B.DIS  
LIGHT  
M-STOP  
8
BLC  
BLC  
FADE  
REC  
3 4  
5
10  
Recording Button [REC] (l 36, 37)  
6) Still Button [STILL] (l 20, 29)  
Picture in Picture Button [P-IN-P] (l 29)  
Pause Button [;] (l 32)  
Memory Card Data Delete Button [M-DEL] (NV-DS50 only)  
11  
12  
13  
(l 42)  
7) Play Button [1] (l 30)  
14  
15  
16  
17  
Playback Multi Button [MULTI] (l 30)  
Memory Card Play Button [M-PLAY] (NV-DS50 only) (l 40)  
8) Stop Button [] (l 30)  
Memory Card Stop Button [M-STOP] (NV-DS50 only) (l 40)  
9) Recording Check Button [S] (l 18)  
Rewind/Review Button [6] (l 30, 31)  
10) Backlight Button [BLC] (l 23, 39)  
Fast Forward/Cue Button [5] (l 31)  
11) Eyecup  
18  
12) Viewfinder (l 13, 53)  
.........................................................................................................  
23  
19  
24  
25  
Due to limitations in LCD production technology, there may  
be some tiny bright or dark spots on the Viewfinder screen.  
However, this is not a malfunction and does not affect the  
recorded picture.  
20  
21  
22  
.........................................................................................................  
13) Eyepiece Corrector Knob (l 13)  
14) DC Input Socket [DC IN] (l 10)  
15) Battery Holder  
16) S-Video Input/Output Socket [S-VIDEO] (l 35, 36)  
17) LCD Monitor Open Button [PUSH OPEN] (l 13)  
18) Battery Release Lever [BATT RELEASE] (l 10)  
19) Microphone (built-in, stereo) (l 21)  
20) Lens  
21) 0-Lux Recording Switch [0 LUX ON/OFF] (l 23)  
22) Built-in Video Light (l 19)  
23) Cassette Eject Lever [TAPE EJECT] (l 12)  
24) DV Terminal (l 37)  
Connect this to the digital video equipment.  
25) Digital Still Picture Terminal [TO PC] (NV-DS30 only) (l 37)  
USB Socket [TO PC] (NV-DS50 only) (l 43)  
6
26) Photoshot Button [PHOTOSHOT] (l 20, 39)  
27) Zoom Lever [W/T] (l 21)  
26 27  
Volume Lever [VOLUME] (l 30)  
28  
28) Multi-Function Dial [PUSH] (l 14, 25, 26, 27)  
29) Menu Button [MENU] (l 14)  
30) Power Lamp [POWER] (l 18, 30, 39)  
31) Recording Start/Stop Button (l 18)  
32) Shoulder Strap Holders (l 12)  
29  
30  
31  
32  
33  
34  
32  
33) Audio-Video Input/Output Socket [A/V IN/OUT] (l 35, 36)  
Headphone Socket [PHONES] (l 48)  
Connecting an AV Cable to this socket activates the Movie  
Camera’s built-in speaker, but connecting a headphone, etc.  
deactivates it.  
34) Off/On Mode Selector Switch [VCR/OFF/CAMERA/M-CARD]  
([M-CARD] NV-DS50 only) (l 12, 18, 30, 39, 50)  
35) Card Slot Cover (NV-DS50 only) (l 38)  
36) Card Slot (NV-DS50 only) (l 38)  
37) Card Lock Switch [LOCK] (NV-DS50 only) (l 39, 40)  
When you want to record in Camera Mode, setting to lock  
prevents the [VCR/OFF/CAMERA/M-CARD] Switch to be set  
to [M-CARD] by accident.  
35  
36  
38) Card Access Lamp [ACCESS] (NV-DS50 only) (l 38)  
39) Card Slot Cover Open Lever [OPEN] (NV-DS50 only) (l 38)  
40) Microphone Socket [EXT MIC]  
3738 39  
Connect with an external microphone or audio equipment.  
(When this socket is in use, the built-in microphone does not  
operate.)  
40  
41  
42  
43  
41) Speaker (l 30)  
42) Remote Control Sensor (l 9)  
Built-in Infra-red Beam Emitters (l 23)  
43) Grip Belt (l 11)  
44) LCD Monitor (l 13, 53)  
.........................................................................................................  
Due to limitations in LCD production technology, there may  
be some tiny bright or dark spots on the LCD Monitor screen.  
However, this is not a malfunction and does not affect the  
recorded picture.  
.........................................................................................................  
45) Cassette Compartment Cover (l 12)  
46) Cassette Holder (l 12)  
47) Tripod Receptacle  
Used for mounting the Movie Camera on an optional tripod.  
44 45  
46  
47  
7
Remote Controller  
Using the wireless Remote Controller that is supplied with the Movie  
Camera, most of the Movie Camera functions can be operated from  
a distance.  
1
2
3
4
Remote Controller Buttons  
START/  
STOP  
DATE/ PHOTO  
TIME  
SHOT  
1) Date/Time Button [DATE/TIME] (l 45)  
2) Indication Output Button [OSD] (l 35)  
3) Counter Indication Shift Button [COUNTER] (l 45)  
4) Reset Button [RESET] (l 56)  
5) Recording Button [REC] (l 36, 37)  
6) Audio Dubbing Button [A.DUB] (l 35)  
7) Slow Motion/Still Advance Buttons  
[E, D] (E: reverse, D: forward) (l 31)  
8) Index Search Buttons  
5
6
OSD  
COUNTER RESET  
ZOOM  
T
¥REC A.DUB  
V
W
/REW PLAY  
FF/  
W
6
1
5
9
7
8
STILL ADV PAUSE/ITEM STILL ADV  
E
;
D
INDEX STOP/SET INDEX  
K
L
[:, 9] (::reverse, 9:forward) (l 33)  
9) Zoom/Volume Button [ZOOM/VOL] (l 21, 30)  
MENU  
The following buttons function in the same manner as the  
corresponding buttons on the Movie Camera.  
10) Photoshot Button [PHOTOSHOT] (l 20, 39)  
11) Recording Start/Stop Button [START/STOP] (l 18)  
12) Fast-forward/Cue Button [5] (l 31)  
13) Rewind/Review Button [6] (l 30, 31)  
14) Play Button [1] (l 30)  
15) Pause Button [;] (l 32)  
Item Button [ITEM] (l 14)  
16) Stop Button [] (l 30)  
Set Button [SET] (l 14)  
17) Menu Button [MENU] (l 14)  
10  
11  
START/  
STOP  
DATE/ PHOTO  
TIME  
SHOT  
OSD  
COUNTER RESET  
ZOOM  
T
12  
13  
¥REC A.DUB  
V
W
FF/  
/REW PLAY  
W
6
1
5
STILL ADV PAUSE/ITEM STILL ADV  
14  
15  
16  
E
;
D
INDEX STOP/SET INDEX  
K
L
17  
MENU  
8
ªInserting a Button-type Battery  
Before using the Remote Controller, insert the supplied button-type  
battery.  
1
1
2
3
While pressing the Stopper 1, pull out the Battery  
Holder.  
Insert the button-type battery with the imprint (i)  
facing upward.  
Insert the Battery Holder into the Remote Controller.  
When the button-type battery is weak, replace it with a new  
CR2025 battery. (A battery is normally expected to last about  
1 year. However, it depends on operation frequency.)  
Make sure to match the poles correctly when inserting the battery.  
.........................................................................................................  
1
2
3
CAUTION  
Danger of explosion if battery is incorrectly replaced. Replace  
only with the same or equivalent type recommended by the  
equipment manufacturer. Discard used batteries according to  
manufacturer’s instructions.  
.........................................................................................................  
WARNING  
Risk of fire, explosion and burns. Do not recharge,  
disassemble, heat above 100xC or incinerate. Keep the  
Button-Type battery out of the reach of children. Never put  
Button-Type battery in mouth. If swallowed call your doctor.  
.........................................................................................................  
ªUsing the Remote Controller  
1 Direct the Remote Controller to the Remote Control  
Sensor of the Movie Camera and press an  
appropriate button.  
Distance from the Movie Camera: Within approximately  
5 metres  
Angle: Within approximately 15o in the vertical and horizontal  
directions from the central axis  
The above operating ranges are for indoor use. Outdoors or under  
strong light, the Movie Camera may not operate properly even  
within the above ranges.  
15˚  
15˚  
15˚  
15˚  
For other notes concerning this item, see page 46.  
9
Power Supply  
ªUsing the AC Adaptor  
1
Connect the DC Input Lead to the [DC IN] Socket on  
the Movie Camera.  
1
2
3
Connect the DC Input Lead to the AC Adaptor.  
Connect the AC Mains Lead to the AC Adaptor and  
the AC mains socket.  
The AC Mains Leads outlet plug cannot be pushed fully into  
the AC Adaptor socket. A gap will remain as shown 1.  
Before connecting or disconnecting the power supply, set the  
[VCR/OFF/CAMERA/M-CARD] Switch on the Movie Camera to  
[OFF] and make sure that the [POWER] Lamp is not lit.  
1
ªUsing the Battery  
2
Before use, fully charge the Battery.  
3
1 Attach the Battery to AC Adaptor and charge it.  
Since the Battery will not be charged when the DC Input Lead  
is connected to the AC Adaptor, disconnect them.  
The [POWER] Lamp and [CHARGE] Lamp lights up, and  
charging starts.  
When the [CHARGE] Lamp goes off, charging is completed.  
2 Attach the charged Battery to the Movie Camera.  
To Remove the Battery  
Set the [VCR/OFF/CAMERA/M-CARD] Switch 2 to [OFF], and  
while pressing the [BATT RELEASE] Lever 3, slide the Battery to  
remove it.  
When attaching or removing Battery, set the [VCR/OFF/  
CAMERA/M-CARD] Switch to [OFF] and make sure the  
[POWER] Lamp is not lit.  
ªUsing the Car Battery Charger  
VCR  
OFF  
CAMERA  
M-CARD  
2
If you use the Car Battery Charger (VW-KBD2E; optional), you can  
supply power to the Movie Camera and charge the battery inside  
your car. For further information, refer to the instruction manual of  
the Car Battery Charger.  
Be sure to start the car engine before you connect the Car Adaptor  
Cord, otherwise the fuse may blow.  
BATT RELEASE  
For other notes concerning this item, see page 46.  
3
10  
Charging Time and Available Recording Time  
NV-DS30  
1h  
1h55min.(1h20min.)  
1h(40min.)  
NV-DS50  
1h  
1h45min.(1h10min.)  
55min.(35min.)  
1h50min.  
CGR-D08R  
CGR-D08S  
CGR-D120  
CGP-D14S  
CGP-D210  
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
1h50min.  
3h15min.(2h10min.)  
1h40min.(1h5min.)  
2h  
3h50min.(2h35min.)  
1h55min.(1h20min.)  
3h15min.  
6h40min.(4h30min.)  
3h20min.(2h15min.)  
5h30min.  
12h55min.(8h40min.) 11h40min.(7h55min.)  
6h30min.(4h20min.) 5h50min.(4h)  
2h55min.(2h)  
1h30min.(1h)  
2h  
CGR-D16S  
CGR-D220  
3h30min.(2h20min.)  
1h45min.(1h10min.)  
3h15min.  
CGP-D28S  
CGP-D320  
6h(4h5min.)  
3h(2h5min.)  
5h30min.  
CGA-D54S  
A Charging Time  
B Maximum Continuous Recording Time  
C Intermittent Recording Time  
(Intermittent Recording Time is the available recording time with repeated recording and stopping actions.)  
1h10min.indicates 1 hour and 10 minutes.  
Battery CGR-D08R is supplied.  
The times shown in the table are approximate times. The numbers in parentheses indicate the recording  
time when the LCD Monitor is used. In actual use, the available recording time may be shorter.  
The times shown in the table are for continuous recording at a temperature of 20oC and humidity of 60%.  
If the Battery is charged at a higher or lower temperature, the charging time may be longer.  
~~~~~~~~~~~~~~~~~~~~~~  
To protect the Lens surface, attach the Lens Cap. Adjust the length  
Lens Cap and Grip Belt  
1
of the Grip Belt to the size of your hand.  
1
1
Pass the Lens Cap Cord through the attached eye on  
the Lens Cap and thread it as shown in the  
illustration 1.  
2, 3  
2
3
Attach the Lens Cap to the Grip Belt.  
Put your hand through the Grip Belt and adjust the  
length.  
The removed Lens Cap can be hooked on to the Grip Belt 2.  
When you remove the Lens Cap, press the knobs firmly.  
When you are not recording, be sure to keep the Lens Cap  
attached to the Lens for protection.  
2
11  
Attaching the Shoulder Strap  
1
2
We recommend that you attach the Shoulder Strap before going out  
of doors to record so as to avoid dropping the Movie Camera.  
1
Pull the end of the Shoulder Strap through the  
Shoulder Strap Holder on the Movie Camera.  
Fold the tip of the Shoulder Strap, run it through the  
Shoulder Strap Length Adjuster, and pull it.  
2
Pull it out more than 2 cm 1 from the Shoulder Strap Length  
Adjuster so that it cannot slip off.  
1
~~~~~~~~~~~~~~~~~~~~~~  
Inserting a Cassette  
When power is supplied to the Movie Camera, the Cassette can be  
TAPE  
EJECT  
taken out without turning the Movie Camera [ON].  
2
3
1
Press [PUSH OPEN] Button and open the LCD  
Monitor.  
1
PUSH  
OPEN  
2
3
4
Slide the [TAPE EJECT] Lever to open the Cover.  
Insert a Cassette.  
Close the Cover and press the [PUSH CLOSE] mark  
to lock the Cover.  
ªAccidental Erasure Prevention  
PUSH CLOSE  
4
Opening the accidental erasure prevention slider 1 on the cassette  
(by sliding it in the [SAVE] arrow direction) prevents recording. To  
enable recording, close the accidental erasure prevention slider (by  
sliding it in the [REC] arrow direction).  
1
R
E
C
SAVE  
~Fo~r ot~he~r no~tes~co~nc~ern~ing~th~is i~tem~, s~ee~pa~ge ~46.~~~~~  
Turning on the Movie Camera and  
Selecting Modes  
1
Set the [VCR/OFF/CAMERA/M-CARD] Switch to  
[CAMERA], [VCR] or [M-CARD]. ([M-CARD]: NV-DS50  
only)  
The [POWER] Lamp lights up.  
CAMERA:  
VCR:  
Camera Mode  
VCR Mode  
M-CARD:  
Card Recording Mode  
Card Playback Mode (To this mode, press the  
[M-PLAY] Button in the Card Recording Mode)  
VCR  
OFF  
CAMERA  
M-CARD  
If the Card Lock Switch 1 is set to lock, the [VCR/OFF/CAMERA/  
M-CARD] Switch cannot be set to [M-CARD]. (NV-DS50 only)  
To Turn off the Power  
LOCK 1  
Set the [VCR/OFF/CAMERA/M-CARD] Switch to [OFF].  
12  
Using the Viewfinder/LCD Monitor  
ªUsing the Viewfinder  
Before using the Viewfinder, adjust the field of view so that the  
displays inside the Viewfinder become clear and easy to read.  
12:30:45  
1
2
Tilt the Viewfinder upward.  
Adjust by sliding the Eyepiece Corrector Knob 1.  
15.10.2002  
ªUsing the LCD Monitor  
With the LCD Monitor open, you can also record the picture while  
watching it.  
12:30:45  
15.10.2002  
1 Press the [PUSH OPEN] Button and, at the same  
time, bring the LCD Monitor out about 90o in the  
direction of the arrow.  
The Viewfinder goes off.  
1
2
2 Adjust the LCD Monitor angle according to the  
desired recording angle.  
The LCD Monitor can rotate a maximum of 180o 2 from the  
vertical position to the upward direction and a maximum of  
90o 3 to the downward direction. Forcefully rotating the LCD  
Monitor beyond these ranges will damage the Movie Camera.  
Closing the LCD Monitor  
1
Push the LCD Monitor until it is securely locked.  
ªAdjusting Brightness and Colour Level  
When [LCD/EVF SETUP] on the [CAMERA FUNCTIONS] or [VCR  
FUNCTIONS] Main-Menu is selected, the following items are  
displayed. (l 14)  
LCD Brightness [LCD BRIGHTNESS]  
It adjusts the brightness of the image on the LCD screen.  
LCD Colour Level [LCD COLOUR]  
It adjusts the colour saturation of the image on the LCD screen.  
Brightness of the Viewfinder [EVF BRIGHTNESS]  
It adjusts the brightness of the image in the Viewfinder.  
To Adjust  
Press the [PUSH] Dial and select the item to be adjusted, and then  
turn the [PUSH] Dial to raise or lower the number of vertical bars in  
the Bar Indication.  
PUSH  
OPEN  
2
3
180x  
90x  
A larger number of vertical bars indicates stronger brightness or  
colour saturation.  
For other notes concerning this item, see page 53.  
LCD/EVF SETUP  
LCD BRIGHTNESS  
[-]||||----[+]  
LCD COLOUR  
[-]||||----[+]  
EVF BRIGHTNESS  
[-]||||----[+]  
PRESS MENU TO RETURN  
13  
Using the Menu Screen  
To facilitate the selection of a desired function or setup, this Movie  
Camera displays various function setups on Menus.  
1
Press the [MENU] Button.  
The Menu corresponding to the Mode selected by using the  
[VCR/OFF/CAMERA/M-CARD] Switch 1 is displayed.  
2
3
Turn the [PUSH] Dial to select a desired Sub-Menu.  
Turn the [PUSH] Dial to display the highlightened item.  
Press the [PUSH] Dial to display the selected Sub-  
Menu.  
1
4
5
Turn the [PUSH] Dial to select the item to be set.  
Press the [PUSH] Dial to set the selected item to a  
desired mode.  
With each pressing of the [PUSH] Dial, the cursor [1] moves  
MENU  
PUSH  
W.B./SHUTTER  
1
2, 3, 4, 5  
IRIS/MF/JOG  
to the next mode.  
While a Menu is displayed, you cannot record or play back. Menus  
can be displayed during playback but not during recording. The  
above operations can be done using the [MENU] Button, [SET]  
Button and [ITEM] Button on the Remote Controller. (l 8)  
To Exit the Menu Screen  
Press the [MENU] Button again.  
About the Menu Mode Setting  
The setting selected on the Menu will be retained even when the  
Movie Camera is turned off. However, if the Battery or AC Adaptor is  
disconnected before turning off the Movie Camera, the selected  
setup may not be retained.  
Menu operation flow is shown in this text by >>.  
ªImage Selection (NV-DS50 only)  
An Image Selection Operation may be necessary during Menu  
Operations. In this case, carry out the following procedure.  
,
1 Turn the [PUSH] Dial and select a picture.  
The selected picture is underlined 2.  
2 Press the [PUSH] Dial to confirm the selection of the  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
picture.  
After the above Picture Selection Procedure, carry out the various  
Menu Operations. (The above procedure will not be repeated in  
the following instructions.)  
1
4
2
5
3
6
2
DELETE:M-DEL  
D-000  
PRESS STOP TO EXIT  
14  
List of Menus  
CAMERA FUNCTIONS  
The figures of the Menus are for explanation purposes only, and  
they are different from the actual Menus.  
Camera Mode Main-Menu [CAMERA FUNCTIONS]  
[CAMERA SETUP] Sub-Menu  
1.CAMERA SETUP  
2.DIGITAL EFFECT  
3.RECORDING SETUP  
4.DISPLAY SETUP  
5.LCD/EVF SETUP  
6.OTHER FUNCTIONS  
7.PHOTO TITLE  
1) Auto Exposure Mode [PROG.AE] (l 24)  
2) Progressive Photoshot Mode [PROGRESSIVE] (l 20)  
3) Digital Zoom [D.ZOOM] (l 21)  
PRESS MENU TO EXIT  
CAMERA SETUP  
4) Cinema-like Format Recording [CINEMA] (l 23)  
5) Returning to the Main-Menu [RETURN]  
[DIGITAL EFFECT] Sub-Menu  
6) Digital Effects [EFFECT] (l 28)  
[RECORDING SETUP] Sub-Menu  
1)  
2)  
3)  
4)  
PROG.AE  
4
PROGRESSIVE OFF  
D.ZOOM  
CINEMA  
OFF  
5
7
º
ON  
OFF 20t 500t  
OFF  
ON  
RETURN  
---- YES  
5)  
PRESS MENU TO EXIT  
7) Recording Speed Mode [REC SPEED] (l 19)  
8) Audio Recording Mode [AUDIO REC] (l 19)  
9) Scene Index Mode [SCENEINDEX] (l 33)  
10) Wind Noise Reduction [WIND CUT] (l 24)  
11) Zoom Microphone [ZOOM MIC] (l 21)  
[DISPLAY SETUP] Sub-Menu  
12) Date and Time Indication [DATE/TIME] (l 45)  
13) Counter Display Mode [C.DISPLAY] (l 45)  
14) Counter Reset [C.RESET] (l 56)  
It resets the counter to zero. However, it cannot reset the Time  
Code.  
15) Display Mode [DISPLAY] (l 45)  
[LCD/EVF SETUP] Sub-Menu  
DIGITAL EFFECT  
EFFECT  
OFF  
MIRROR  
6)  
STROBE  
SLIM  
STRETCH  
MOSAIC  
TRACER  
GAINUP  
WIPE  
MIX P-IN-P  
RETURN  
---- YES  
PRESS MENU TO EXIT  
RECORDING SETUP  
7)  
8)  
9)  
10)  
11)  
REC SPEED  
AUDIO REC  
SCENEINDEX 2HOUR  
SP  
12bit  
LP  
16bit  
DAY  
ON  
WIND CUT  
ZOOM MIC  
OFF  
OFF  
ON  
RETURN  
---- YES  
PRESS MENU TO EXIT  
16) LCD Brightness [LCD BRIGHTNESS] (l 13)  
17) LCD Colour Level [LCD COLOUR] (l 13)  
18) Brightness of the Viewfinder [EVF BRIGHTNESS] (l 13)  
[OTHER FUNCTIONS] Sub-Menu  
19) Remote Controller Mode [REMOTE] (l 46)  
20) Beep Sound [BEEP SOUND] (l 46)  
21) Shutter Effect [SHTR EFFECT] (l 20)  
22) Date and Time Setting [CLOCK SET] (l 17)  
23) Self-Recording [SELFSHOOT] (l 19)  
24) Owner ID Set [OWNER ID SET] (l 57)  
25) Demonstration Mode [DEMO MODE] (l 57)  
[PHOTO TITLE] Sub-Menu (NV-DS50 only)  
26) Title In Setting [TITLE] (l 41)  
DISPLAY SETUP  
12)  
13)  
14)  
15)  
DATE/TIME OFF TIME DATE  
C.DISPLAY COUNTER MEMORY  
TIMECODE  
C.RESET  
DISPLAY  
OFF ON  
ALL PARTIAL OFF  
RETURN  
---- YES  
PRESS MENU TO EXIT  
LCD/EVF SETUP  
LCD BRIGHTNESS  
[-]||||----[+]  
LCD COLOUR  
[-]||||----[+]  
EVF BRIGHTNESS  
[-]||||----[+]  
16)  
17)  
18)  
PRESS MENU TO RETURN  
OTHER FUNCTIONS  
27) Title In Mode [MODE] (l 41)  
19)  
20)  
21)  
22)  
23)  
24)  
25)  
REMOTE  
VCR1 VCR2 OFF  
BEEP SOUND  
SHTR EFFECT  
CLOCK SET  
SELFSHOOT  
OFF  
OFF  
OFF  
ON  
ON  
ON  
NORMAL MIRROR  
OWNER ID SET OFF  
OFF  
ON  
ON  
DEMO MODE  
RETURN  
---- YES  
PRESS MENU TO EXIT  
PHOTO TITLE  
26)  
TITLE  
MODE  
OFF  
WIPE  
SET  
MIX  
RETURN  
---- YES  
PRESS MENU TO EXIT  
15  
VCR Mode Main-Menu [VCR FUNCTIONS]  
[PLAYBACK FUNCTIONS] Sub-Menu  
1) Blank Search [BLANK SEARCH] (l 32)  
2) Index Search Mode [SEARCH] (l 33)  
3) Audio Selector [12bit AUDIO] (l 35)  
4) Multi-Picture Mode [MULTI SPEED] (l 30)  
5) Returning to the Main-Menu [RETURN]  
[DIGITAL EFFECT] Sub-Menu  
VCR FUNCTIONS  
1.PLAYBACK FUNCTIONS  
2.DIGITAL EFFECT  
3.RECORDING SETUP  
4.DISPLAY SETUP  
5.LCD/EVF SETUP  
6.OTHER FUNCTIONS  
PRESS MENU TO EXIT  
6) Digital Effects 1 [EFFECT1] (l 34)  
7) Digital Effects 2 [EFFECT2] (l 34)  
8) Digital Zoom [D.ZOOM] (l 34)  
[RECORDING SETUP] Sub-Menu  
PLAYBACK FUNCTIONS  
BLANK SEARCH OFF  
1)  
2)  
3)  
4)  
ON  
PHOTO SCENE  
SEARCH  
12bitAUDIO  
MULTI SPEED  
ST1 ST2 MIX  
FAST NORMAL  
SLOW  
9) Recording Speed Mode [REC SPEED] (l 19)  
10) Audio Dubbing [AUDIO DUB] (l 35)  
11) Audio Recording Mode [AUDIO REC] (l 35)  
12) AV Socket [AV JACK] (l 36)  
RETURN  
---- YES  
5)  
PRESS MENU TO EXIT  
DIGITAL EFFECT  
EFFECT1 OFF  
STROBE  
SLIM  
MIRROR  
MOSAIC  
TRACER  
6)  
[DISPLAY SETUP] Sub-Menu  
All of the items on the [DISPLAY SETUP] Sub-Menu are the same  
as those on the [DISPLAY SETUP] Sub-Menu of the [CAMERA  
FUNCTIONS] Main-Menu.  
STRETCH  
EFFECT2 OFF SEPIA B/W  
7)  
8)  
D.ZOOM  
OFF  
ON  
RETURN  
---- YES  
PRESS MENU TO EXIT  
RECORDING SETUP  
[LCD/EVF SETUP] Sub-Menu  
All of the items on the [LCD/EVF SETUP] Sub-Menu are the same  
as those on the [LCD/EVF SETUP] Sub-Menu of the [CAMERA  
FUNCTIONS] Main-Menu.  
9)  
REC SPEED  
AUDIO DUB  
AUDIO REC  
AV JACK  
SP  
LP  
ON  
16bit  
OFF  
12bit  
IN OUT/PHONES  
10)  
11)  
12)  
[OTHER FUNCTIONS] Sub-Menu  
All of the items on the [OTHER FUNCTIONS] Sub-Menu are the  
same as those on the [OTHER FUNCTIONS] Sub-Menu of the  
[CAMERA FUNCTIONS] Main-Menu.  
RETURN  
---- YES  
PRESS MENU TO EXIT  
CARD SETUP  
Card Recording Mode Menu [CARD SETUP] (NV-DS50 only)  
1) Picture Size [REC MODE] (l 39)  
REC MODE 320t240 640t480  
1)  
Card Playback Mode Menu [CARD SETUP] (NV-DS50 only)  
1) Indication Display [DISPLAY] (l 40)  
2) DCF Number [DCF NO.] (l 40)  
3) Setting DPOF [DPOF] (l 43)  
PRESS MENU TO EXIT  
CARD SETUP  
1)  
2)  
3)  
DISPLAY  
DCF NO.  
DPOF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
PRESS MENU TO EXIT  
16  
Setting Date and Time  
Since the internal clock of the Movie Camera has a slight  
imprecision, make sure to check the time before recording.  
1
2
Set [OTHER FUNCTIONS] >> [CLOCK SET] >> [ON].  
Press the [PUSH] Dial to select [YEAR]/[MONTH]/  
[DAY]/[HOUR]/[MIN.] and turn to set it to a desired  
value.  
1, 3  
1, 2  
Year will cycle in the order shown below.  
2000, 2001, ..., 2089, 1990, ...  
MENU  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
3
Press the [MENU] Button to finish setting the date  
and time.  
CLOCK SET  
The clock operation starts from [00] second.  
The Menu will disappear when the [MENU] Button is pressed  
again.  
YEAR  
MONTH  
DAY  
HOUR  
MIN.  
2002  
12  
21  
14  
30  
If the built-in battery is weak, the [0] Indication 1 flashes. In this  
case, charge the built-in battery.  
PRESS MENU TO RETURN  
The clock employs the 24-hour system.  
1
~~~~~~~~~~~~~~~~~~~~~~  
Internal Lithium Battery Recharge  
The internal lithium battery sustains the operation of the clock.  
When the [0] Indication flashes, the internal lithium battery is  
near exhaustion.  
1
Connect the AC adaptor to the Movie Camera with  
the power turned off and then connect to the AC  
Mains socket.  
1
After charging for 4 hours, the built-in lithium battery can power  
the clock for approximately 3 months.  
17  
Recording  
When the [AUTO] Indication 1 is displayed on the screen, the  
Movie Camera automatically adjust the focus and white balance. In  
some cases, they cannot be adjusted automatically and need to be  
adjusted manually. (l 25, 27)  
1
AUTO  
1
Set the [VCR/OFF/CAMERA/M-CARD] Switch to  
[CAMERA].  
AUTO/MNL FOCUS  
1
3
2
The [POWER] Lamp lights up. 2  
VCR  
OFF  
CAMERA  
M-CARD  
2
3
Press the [AUTO/MNL] Button for about 1 second to  
display the [AUTO] Indication.  
Press the Recording Start/Stop Button.  
Recording starts.  
2
POWER  
After the [RECORD] is displayed, it changes to [REC]. 3  
ªTo Pause the Recording  
Press the Recording Start/Stop Button again.  
The [PAUSE] Indication is displayed. 4  
If the Recording Pause Mode continues for more than 6 minutes,  
the power is turned off automatically for tape protection and power  
conservation. To resume recording from this condition, turn on the  
power again.  
3
4
PAUSE  
REC  
ªTo Check the Recording  
PAUSE  
By pressing the [S] Button 5 briefly in the Recording Pause  
Mode, you can play back the last few seconds of the recorded  
scene.  
RECORD  
The [CHK] Indication is displayed. After checking, the Movie  
Camera resumes the Recording Pause Mode.  
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
ªTo Finish the Recording  
Set the [VCR/OFF/CAMERA/M-CARD] Switch to [OFF].  
MULTI  
M-STOP  
5
BLC  
BLC  
18  
ªRecording Yourself  
By opening the LCD Monitor and rotating it frontward (to the lens  
side), you can let the subject in front of the Movie Camera monitor  
the shot while recording is in progress.  
When the LCD Monitor is opened, the Viewfinder is disabled  
automatically. However, when the LCD Monitor is rotated  
frontward, the image is also shown in the Viewfinder.  
If you prefer to have the image on the LCD Monitor to look like an  
image in a mirror, set [SELFSHOOT] on the [OTHER  
FUNCTIONS] Sub-Menu to [MIRROR].  
Images are recorded normally and no left and right reversal  
occurs.  
ªRecording with the Built-in Video Light  
By using the Built-in Video Light, you can record the scenes in the  
dark place.  
SIS/  
P.B.DIS  
LIGHT  
FADE  
REC  
6
If you Press the [LIGHT] Button 6 for about 1 second, the Built-in  
Video Light lights. (The [ ] Indication 7 is displayed.)  
To turn the Built-in Video Light off, press the [LIGHT] Button for  
about 1 second.  
The subject should be within 2 metres of the Movie Camera.  
ªLP Mode  
A desired recording speed can be selected with [REC SPEED] on  
the [RECORDING SETUP] Sub-Menu.  
If LP Mode is selected, the recording time becomes 1.5 times  
longer than that of SP Mode.  
Although the image quality does not decrease with the LP Mode  
recording, mosaic-pattern noise may appear on a playback image,  
or some normal functions may be restricted.  
7
The contents that are recorded in LP Mode are not completely  
compatible with other equipment.  
Audio dubbing is not possible with LP Mode. (l 35)  
ªAudio Recording Mode  
The sound quality of the recorded sound can be selected with  
[AUDIO REC] on the [RECORDING SETUP] Sub-Menu. High  
sound-quality recording is possible with “16 bit 48 kHz 2 track”  
Mode. With the “12 bit 32 kHz 4 track” Mode, the original sound can  
be recorded on 2 tracks in stereo, while the other 2 tracks can be  
used for Audio Dubbing.  
For other notes concerning this item, see page 46.  
19  
Photoshot  
This Movie Camera can take approximately 7 seconds still pictures  
containing sound.  
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
MULTI  
2
M-STOP  
1
Press the [PHOTOSHOT] Button in the Recording  
Pause Mode.  
BLC  
BLC  
The Movie Camera records a still picture for about 7 seconds  
1
and then switches back to the Recording Pause Mode.  
PHOTOSHOT  
ªProgressive Photoshot  
With the Progressive Photoshot Function, you can record still  
pictures with higher resolution than with the normal Photoshot  
Function.  
When [PROGRESSIVE] on the [CAMERA SETUP] Sub-Menu is  
set to [ON], the [æ] Indication 1 is displayed. When the [æ]  
Indication is displayed, press the [PHOTOSHOT] Button in the  
Recording Pause Mode.  
This function may not work with some function setups.  
PHOTO  
ªContinuous Photoshot  
If the [PHOTOSHOT] Button continues to be pressed when the  
[SHTR EFFECT] on the [OTHER FUNCTIONS] Sub-Menu is set to  
[ON], the Movie Camera will continuously record still pictures in  
approximately 0.7 second intervals until the button is released.  
(However, this does not operate when using Progressive  
Photoshot.)  
PHOTO  
PHOTO  
The screen blinks and, at the same time, a shutter clicking sound is  
recorded.  
ªDigital Still Picture  
When the [STILL] Button 2 is pressed for about 1 second, images  
become still pictures. When the button is pressed again, the Digital  
Still Picture Mode is cancelled.  
1
We recommend that you press the [STILL] Button first at the  
position where you wish to record the picture so as to enter the  
Digital Still Picture Mode and then press the [PHOTOSHOT]  
Button.  
For other notes concerning this item, see page 46.  
20  
Zoom In/Out Functions  
It gives special effects to the video by recording objects close by or  
with wide-angle shot.  
1
1
For wide-angle shots (zoom out):  
Push the [W/T] Zoom Lever towards [W].  
For close-ups (zoom in):  
W
T
Push the [W/T] Zoom Lever towards [T].  
To Take Close-up Shots of Small Subjects  
(Macro Close-up Function)  
When the zoom magnification is 1k, the Movie Camera can focus  
on a subject that is as close as approximately 30 mm from the Lens.  
With this, small subjects like insects can be recorded.  
To Use the Zoom Microphone Function  
1t  
Along with the zooming operation, the microphone's directional  
angle and sensitivity are varied for recording sounds.  
Set [ZOOM MIC] on the [RECORDING SETUP] Sub-Menu to  
5t  
[ON]. (The [Z.MIC] Indication is displayed. 1)  
The Zoom Microphone Function may not work effectively if the  
surrounding noise is too loud.  
10t  
For other notes concerning this item, see page 46.  
Z.MIC  
1
~~~~~~~~~~~~~~~~~~~~~~  
Digital Zoom Function  
This function is useful when you want to record close-up shots of  
subjects located beyond a normal zoom range of 1k to 10k  
magnification. With the Digital Zoom Function, you can select a  
magnification of 20k or even to 500k.  
2
W
T
1
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>  
[D.ZOOM] >> [20t] or [500t].  
20k: Digital zooming to 20k  
500k: Digital zooming to 500k  
2
Push the [W/T] Zoom Lever towards [W] or towards  
[T] to zoom in or out.  
MENU  
To Cancel the Digital Zoom Function  
PUSH  
W.B./SHUTTER  
Set [D.ZOOM] on the [CAMERA SETUP] Sub-Menu to [OFF].  
As the magnification of digital zoom increases, the quality of image  
may deteriorate.  
IRIS/MF/JOG  
1
White balance cannot be set in the digital zoom range.  
20t  
D.ZOOM  
21  
Image Stabilizer Function  
SIS/  
P.B.DIS  
LIGHT  
FADE  
REC  
If the Movie Camera might be shaken while recording, the camera  
shake in the image can be corrected.  
1
If the Movie Camera shakes too much, this function may not be  
able to stabilize images.  
1
Press the [SIS] Button.  
The [[] Indication 1 appears.  
To Cancel Image Stabilizer  
Press the [SIS] Button.  
For other notes concerning this item, see page 47.  
1
~~~~~~~~~~~~~~~~~~~~~~  
Fade In/Out Functions  
Fade In 1  
Fade In brings out images and sounds gradually from a black screen  
at the beginning of a scene.  
SIS/  
P.B.DIS  
LIGHT  
FADE  
REC  
1, 3  
,
1
Keep pressing the [FADE] Button during the  
Recording Pause Mode.  
The image fades out gradually.  
2
3
When the image is completely gone, press the  
Recording Start/Stop Button to start recording.  
Release the [FADE] Button about 3 seconds after  
starting recording.  
2,  
The image reappears gradually.  
Fade Out 2  
Fade Out causes images and sounds to disappear gradually,  
leaving a black screen at the end of a scene.  
1 Keep pressing the [FADE] Button while recording.  
The image fades out gradually.  
1
2 When the image is completely gone, press the  
Recording Start/Stop Button to stop recording.  
3 Release the [FADE] Button.  
The still picture cannot fade in or fade out.  
2
22  
Cinema Function  
This function is for recording in a cinema-like wide screen.  
1
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>  
[CINEMA] >> [ON].  
Black bars appear at the top and bottom of the screen. 1  
To Cancel the Cinema Mode  
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [CINEMA]  
>> [OFF].  
MENU  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
1
For other notes concerning this item, see page 47.  
1
CINEMA  
0~Lu~x~N~ig~h~t V~ie~w~F~u~nc~ti~on~~~~~~~~~  
Your Movie Camera emits infra-red rays so as to record subjects  
that cannot be seen with the naked eye.  
1
0 LUX  
ON  
1
Set the [0 LUX ON/OFF] Switch to [ON] to make the  
[0LUX] Indication appear.  
OFF  
Built-in Infra-red Beam Emitters 1 light up. Be careful not to  
cover them with your hand during recording.  
To cancel the 0 Lux Night View Function  
Set the [0 LUX ON/OFF] Switch to [OFF] to turn off the [0LUX]  
Indication.  
1
0LUX  
For other notes concerning this item, see page 47.  
B~ac~k~lig~h~t C~o~m~pe~n~sa~ti~on~F~u~n~ct~io~n ~~~~  
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
This prevents a recording subject from being recorded darker in  
backlight. (Backlight is the light that shines from behind a recording  
subject.)  
MULTI  
M-STOP  
1
BLC  
BLC  
1
Press the [BLC] Button.  
The [ª] Indication 1 appears.  
To Resume Normal Recording  
Press the [BLC] Button.  
When the [BLC] Button is pressed, the entire screen becomes  
brighter.  
By operating the [VCR/OFF/CAMERA/M-CARD] Switch to [OFF],  
the Backlight Compensation Function is cancelled.  
1
ª
23  
Recording in Special Situations  
(Programme AE)  
AUTO/MNL FOCUS  
You can select optimal automatic exposures under specific  
recording situations.  
1
1
Press the [AUTO/MNL] Button for about 1 second to  
display the [MNL] Indication.  
2
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>  
[PROG.AE] >> a desired mode.  
The Indication for the selected mode appears.  
[5] Sports Mode 1  
For recording scenes involving quick movements, such as sports  
scenes.  
MENU  
PUSH  
W.B./SHUTTER  
[7] Portrait Mode 2  
IRIS/MF/JOG  
2
For bringing up people clearly from the background.  
[4] Low Light Mode 3  
1
For recording a dark scene brighter.  
[] Spotlight Mode 4  
For recording a subject under spotlight in a party, theatre, etc.  
3
5
2
4
[º] Surf & Snow Mode 5  
For recording in a glaring surrounding, such as skiing grounds,  
beaches, etc.  
To Cancel the Programme AE Function  
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [PROG.AE]  
>> [OFF].  
For other notes concerning this item, see page 47.  
~~~~~~~~~~~~~~~~~~~~~~  
Wind Noise Reduction Function  
This function reduces the sound of a wind hitting the microphone for  
recording.  
1
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP]  
>> [WIND CUT] >> [ON].  
The [WIND CUT] Indication 1 appears.  
MENU  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
1
1
WIND CUT  
24  
Recording in Natural Colours  
AUTO/MNL FOCUS  
(White Balance)  
1
Depending on the scene or light condition, the Automatic White  
Balance Adjustment Mode may not be able to bring out natural  
colours. (l 26, 56) In such a case, the white balance can be  
adjusted manually.  
2, 3  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
1
2
3
Press the [AUTO/MNL] Button for about 1 second to  
display the [MNL] Indication.  
Press the [PUSH] Dial.  
The [AWB] Indication appears.  
Turn the [PUSH] Dial to set a desired White Balance  
Mode.  
MNL  
1 Automatic White Balance Adjustment [AWB]  
2 The white balalnce setting that was previously set manually [1]  
3 Outdoor Mode [z]  
4 Indoor Mode (recording under incandescent lamp) [{]  
To Resume Automatic Adjustment  
Turn the [PUSH] Dial until the [AWB] Indication appears. Or, press  
the [AUTO/MNL] Button for about 1 second to display the [AUTO]  
Indication.  
1
3
2
4
1AWB  
1
1
1
~~~~~~~~~~~~~~~~~~~~~~  
Adjusting White Balance Manually  
For light outside the functional Auto White Balance Adjustment  
range, use the Manual White Balance Adjustment Mode.  
AUTO/MNL FOCUS  
1
2
3
4
5
Point the Movie Camera at a full-screen white  
subject.  
Press the [AUTO/MNL] Button for about 1 second to  
display the [MNL] Indication.  
Press the [PUSH] Dial.  
2
1
The [AWB] Indication appears.  
Turn the [PUSH] Dial until the [1] Indication is  
displayed.  
Keep pressing [PUSH] Dial until the [1] Indication  
stops flashing.  
PUSH  
3, 4, 5  
W.B./SHUTTER  
To Resume Automatic Adjustment  
IRIS/MF/JOG  
Turn the [PUSH] Dial until the [AWB] Indication is displayed. Or,  
press the [AUTO/MNL] Button for about 1 second to display the  
[AUTO] Indication.  
MNL  
1
25  
Outside of the effective range of Automatic White Balance  
Adjustment, the image will become reddish or bluish. Even within the  
effective range of Automatic White Balance Adjustment, the  
Automatic White Balance Adjustment may not function properly if  
there is more than one light source. In this case, adjust the White  
Balance.  
1) The effective range of Automatic White Balance Adjustment on  
this Movie Camera  
2) Blue sky  
10 000K  
9 000K  
8 000K  
7 000K  
6 000K  
2)  
3)  
4)  
5)  
5 000K  
4 000K  
6)  
7)  
8)  
3) Cloudy sky (Rain)  
4) TV screen  
1)  
5) Sunlight  
6) White fluorescent lamp  
9)  
3 000K  
7) 2 hours after sunrise or before sunset  
8) 1 hour after sunrise or before sunset  
9) Halogen light bulb  
10) Incandescent light bulb  
11) Sunrise or sunset  
10)  
11)  
2 000K  
1 000K  
12)  
12) Candlelight  
For other notes concerning this item, see page 47.  
~~~~~~~~~~~~~~~~~~~~~~  
Manual Shutter Speed Adjustment  
It is useful for recording fast-moving subjects.  
AUTO/MNL FOCUS  
1
2
3
Press the [AUTO/MNL] Button for about 1 second to  
display the [MNL] Indication.  
Press the [PUSH] Dial until the Shutter Speed  
Indication 1 appears.  
1
2, 3  
PUSH  
Turn the [PUSH] Dial to adjust the shutter speed.  
W.B./SHUTTER  
IRIS/MF/JOG  
Range of Shutter Speed Adjustment  
1/50–1/8000 s  
The standard shutter speed is 1/50 s.  
Selecting a speed closer to [1/8000] causes the shutter speed to be  
faster.  
To Resume Automatic Adjustment  
Press the [AUTO/MNL] Button for about 1 second to display the  
[AUTO] Indication.  
MNL  
1/1000  
1
For other notes concerning this item, see page 47.  
26  
Manual Iris Adjustment  
(F Number)  
You can use this function when the screen is too bright or too dark.  
AUTO/MNL FOCUS  
1
1
2
3
Press the [AUTO/MNL] Button for about 1 second to  
display the [MNL] Indication.  
Press the [PUSH] Dial until the Iris Indication 1  
appears.  
2, 3  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
Turn the [PUSH] Dial to adjust the iris.  
Range of Iris Adjustment  
CLOSE (Closed), F16, ..., F2.0, OP (Opened)i0dB, ..., OPi18dB  
When the Gain-up Mode [GAINUP] (l 28) is used, Iris adjustment is  
by OPi12dB.  
When a value closer to [CLOSE] is selected, the image becomes  
darker.  
When a value closer to [OPi18dB] is selected, the image becomes  
brighter.  
MNL  
1/50  
1
F2.4  
The value to which idB is attached indicates a Gain-up value. If this  
value is too large, the quality of the image deteriorates.  
To Resume Automatic Adjustment  
Press the [AUTO/MNL] Button for about 1 second to display the  
[AUTO] Indication.  
For other notes concerning this item, see page 48.  
M~an~u~al~F~oc~u~s~A~dj~us~tm~e~n~t ~~~~~~~~  
Focus can be adjusted manually for recording in a situation where  
auto focus may not function well.  
1 2  
1
2
3
Press the [AUTO/MNL] Button for about 1 second to  
display the [MNL] Indication.  
Press the [FOCUS] Button.  
The [MF] Indication (Manual Focus Mode) 1 appears.  
Turn the [PUSH] Dial to adjust the focus.  
AUTO/MNL FOCUS  
3
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
To Resume Automatic Adjustment  
Press the [FOCUS] Button to turn off the [MF] Indication. Or, press  
the [AUTO/MNL] Button for about 1 second to display the [AUTO]  
Indication.  
MNL  
MF  
1
27  
Digital Effect Functions  
This Movie Camera is equipped with Digital Effect Functions that  
add special effects to the scene.  
Digital Effects [EFFECT]  
1) Mirror Mode [MIRROR]  
The right half of an image becomes a mirror image of the left  
half.  
2) Strobe Mode [STROBE]  
It records images with a stroboscopic effect.  
3) Mosaic Mode [MOSAIC]  
It produces a mosaic-like image.  
4) Slim Mode [SLIM]  
MENU  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
The picture is expanded vertically.  
5) Trailing Effect Mode [TRACER]  
It records images with a trailing effect.  
6) Stretch Mode [STRETCH]  
The Picture is expanded horizontally.  
7) Gain-up Mode [GAINUP]  
It brightens images electronically.  
Adjust focus manually when using this mode. (l 27)  
8) Wipe Mode [WIPE] (l 29)  
1) MIRROR  
2) STROBE  
9) Mix Mode [MIX] (l 29)  
10) Picture in Picture Mode [P-IN-P] (l 29)  
To Select a Desired Digital Effect  
Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT]  
>> a desired Digital Effect.  
To Cancel the Digital Effect  
Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT]  
3) MOSAIC  
5) TRACER  
7) GAINUP  
4) SLIM  
>> [OFF].  
For other notes concerning this item, see page 48.  
6) STRETCH  
8) WIPE  
9) MIX  
10) P-IN-P  
28  
ªWipe Mode and Mix Mode  
Wipe Mode:  
Like a curtain is being pulled, the still picture of the last recorded  
scene gradually changes to the moving image of a new scene.  
Mix Mode:  
MENU  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
1
While the moving image of a new scene fades in, the still image of  
the last recorded scene gradually fades out.  
1
Set [DIGITAL EFFECT] >> [EFFECT] >> [WIPE] or  
[MIX].  
The [WIPE] or [MIX] Indication appears.  
Press the Recording Start/Stop Button to start  
recording.  
Press the Recording Start/Stop Button to pause the  
recording.  
2
3
2, 3, 4  
The last scene is stored in memory. The [WIPE] or [MIX]  
Indication changes to [B] or [C].  
WIPE  
WIPE  
4
Press the Recording Start/Stop Button to restart the  
recording.  
WIPE  
The last image of the previous scene gradually changes to the  
new scene.  
MIX  
MIX  
MIX  
ªPicture-in-Picture Mode  
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
You can display a sub-screen (still picture) inside the screen.  
1 Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >>  
[EFFECT] >> [P-IN-P].  
MULTI  
,
M-STOP  
BLC  
BLC  
2 Aim the Movie Camera at the scene you want to  
capture and press the [STILL] Button for about  
1 second.  
PHOTOSHOT  
3 Press the [P-IN-P] Button.  
A small still picture is displayed in a Normal picture.  
If the [STILL] Button is pressed again, the small still picture is  
cleared.  
4 Press the Recording Start/Stop Button or the  
MENU  
[PHOTOSHOT] Button to record on the Cassette.  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
For other notes concerning this item, see page 48.  
P-IN-P  
29  
M-DEL  
STILL/  
3 P-IN-P  
M-PLAY  
MULTI  
VCR Mode  
3
M-STOP  
2
BLC  
BLC  
Playing Back  
The recorded scene can be played back immediately after the  
recording.  
1
1
Set the [VCR/OFF/CAMERA/M-CARD] Switch to  
[VCR].  
POWER  
The [POWER] Lamp lights up. 1  
2
Press the [6] Button to rewind the tape.  
Rewind the tape to the point where you want to start playback.  
When the tape reaches the beginning, rewinding stops  
automatically.  
2
VCR  
OFF  
CAMERA  
M-CARD  
1
3
Press the [1] Button to start playback.  
The [!] Indication 2 appears.  
To Stop Playback  
Press the [] Button. 3  
4
ªAdjusting the Sound Volume  
1 Push the [VOLUME] lever in the VCR mode.  
W
T
VOLUME [-] | | | | - - - - [+]  
The [VOLUME] Indication 4 appears.  
To adjust the volume with the Remote Controller, press the [T] or [W]  
Button to display the [VOLUME] Indication. Press the [T] Button to  
increase the volume or press the [W] Button to decrease the volume.  
The [VOLUME] Indication goes off a few seconds after the  
adjustment is finished.  
SIS/  
P.B.DIS  
5
If a cassette recorded with a copyright protection signal is played  
back, the picture is distorted by mosaic-like patterns.  
LIGHT  
FADE  
REC  
ªPlayback Digital Image Stabilizer Function  
Press the [P.B.DIS] Button 5. (l 22)  
When using the Playback Digital Image Stabilizer Function, the  
image size is slightly larger.  
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
MULTI  
2, 3  
M-STOP  
If the Movie Camera shakes too much, this function may not be  
able to stabilize images.  
BLC  
BLC  
ªMulti-Picture Mode  
You can capture and record 9 consecutive small still pictures.  
1
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS]  
>> [MULTI SPEED] >> [FAST], [NORMAL] or [SLOW].  
Set the [MULTI SPEED] to a desired strobe speed. At the  
[FAST] setting, 9 consecutive still pictures is captured within  
approximately 1 second, at [NORMAL] within approximately  
2 seconds, and at [SLOW] within approximately 3 seconds.  
Press the [1] Button.  
MENU  
PUSH  
W.B./SHUTTER  
2
3
IRIS/MF/JOG  
1
Press the [MULTI] Button.  
After 9 small pictures are displayed, the Movie Camera is in  
the Still Playback Mode.  
Deleting all the captured Multi-Pictures  
While 9 small pictures are displayed, press the [MULTI] Button.  
For other notes concerning this item, see page 48.  
30  
Finding a Scene You Want to Play Back  
ªCue/Review Playback  
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
MULTI  
If the [5] Button 1 or [6] Button 2 is pressed during  
M-STOP  
2
1
BLC  
BLC  
Playback, it turns to Cue Playback A or Review Playback B.  
If the Button is held continuously, it turns to Cue Playback or  
Review Playback until you release it.  
If the Button is pressed briefly, Cue Playback or Review Playback  
continues even when it is released.  
ªVariable Speed Search Function C  
The speed of Cue Playback or Review Playback can be varied.  
1, 2  
1
2
Keep pressing the [PUSH] Dial during playback.  
Turn the [PUSH] Dial to select a desired search  
speed.  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
A
The following 6 playback speeds are available for the Variable  
Speed Search Function in both the fast-forwarding and rewinding  
directions:  
1/5k (slow playback in SP Mode only), 1/3k (slow playback in LP  
Mode only), 1k, 2k, 5k, 10k and 20k  
ªTo Resume Normal Playback  
Press the [1] Button.  
C
B
During Cue or Review Playback, fast-moving images may show  
mosaic-pattern noise.  
The sound is muted during search.  
~~~~~~~~~~~~~~~~~~~~~~  
Slow Motion Playback  
This Movie Camera can play back at a slow speed.  
START/  
DATE/ PHOTO  
TIME  
SHOT  
STOP  
OSD  
1
2
Press the [1] Button.  
Press the [E] Button or [D] Button on the Remote  
Controller.  
When the [E] Button is pressed, Slow Motion Playback  
proceeds in the reverse direction, while pressing the [D]  
Button starts Slow Motion Playback in the forward direction.  
COUNTER RESET  
ZOOM  
T
¥REC A.DUB  
1
V
W
FF/  
/REW PLAY  
W
6
1
5
STILL ADV PAUSE/ITEM STILL ADV  
E
;
D
INDEX STOP/SET INDEX  
Scenes recorded in the SP Mode are played back at approximately  
1/5th of the normal speed.  
K
L
2
Scenes recorded in the LP Mode are played back at approximately  
1/3rd of the normal speed.  
MENU  
To Resume Normal Playback  
Press the [1] Button.  
}
31  
Still Playback/Still Advance Playback  
This Movie Camera is capable of still picture playback and frame-  
advance playback.  
START/  
STOP  
DATE/ PHOTO  
TIME  
SHOT  
OSD  
1
2
Press the [1] Button.  
Press the [;] Button.  
The playback image stops in the Still Playback Mode.  
COUNTER RESET  
ZOOM  
T
¥REC A.DUB  
1
2
3
Press the [E] Button or [D] Button on the Remote  
Controller.  
With each pressing of the [E] Button, still pictures advance in  
the reverse direction. With each pressing of the [D] Button, still  
pictures advances in the forward direction. If either one of the  
buttons continues to be pressed, still pictures advance  
continuously 1 frame at a time until the button is released.  
V
W
FF/  
/REW PLAY  
W
6
1
5
STILL ADV PAUSE/ITEM STILL ADV  
E
;
D
INDEX STOP/SET INDEX  
K
L
3
;!  
To Resume Normal Playback  
Press the [1] Button.  
ªJog Playback  
By turning the Jog Dial ([PUSH] Dial) 1 of the Movie Camera in the  
Still Playback Mode, still pictures can be advanced one frame at a  
time in the forward or backward direction.  
1
PUSH  
If the Movie Camera is left in the Still Playback Mode for more than  
3 minutes, the Movie Camera switches to the Stop Mode to protect  
the video heads from excessive wear and tear.  
W.B./SHUTTER  
IRIS/MF/JOG  
~~~~~~~~~~~~~~~~~~~~~~  
Finding the End of Recording  
(Blank Search Function)  
The Blank Search Function aids you locate the end of the recording  
on the Cassette quickly.  
1
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS]  
>> [BLANK SEARCH] >> [YES].  
The [BLANK] Indication appears 1 during the Blank Search.  
Approximately 1 second before the last recorded scene, the  
Movie Camera switches to the Still Playback Mode.  
If there is no blank portion left on the Cassette, the Movie  
Camera stops at the end of the tape.  
MENU  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
1
To Cancel Blank Search Before Completion  
Press the [] Button.  
1
BLANK  
32  
Index Search Functions  
To facilitate searching of desired scene, this Movie Camera  
automatically records index signals during recording, as explained in  
the following.  
Photoshot Index Signal  
These signals are automatically recorded whenever still pictures are  
taken in Photoshot Mode. (l 20) Photoshot Index Signals are not  
recorded on still pictures recorded in Continuous Photoshot Mode.  
Scene Index Signal  
Scene Index Signals are automatically recorded when you start  
recording after inserting a Cassette.  
MENU  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
If [SCENEINDEX] of [RECORDING SETUP] Sub-Menu on the  
[CAMERA FUNCTIONS] Main-Menu is set to [2HOUR], an index  
signal is recorded when recording is restarted after an elapse of  
2 hours or longer. If it is set to [DAY], an index signal is recorded  
when recording is restarted after the date has changed since the  
last recording. (While the index signal is recorded, the [INDEX]  
1,  
2
START/  
STOP  
DATE/ PHOTO  
TIME  
SHOT  
OSD  
Indication flashes for a few seconds. A)  
COUNTER RESET  
ZOOM  
T
If the Movie Camera is switched from the VCR Mode to Camera  
Mode or if the date and time is set before the start of recording, the  
index signal is not recorded.  
¥REC A.DUB  
3
1
V
W
FF/  
/REW PLAY  
W
6
1
5
4
2
ªPhotoshot Index Search  
STILL ADV PAUSE/ITEM STILL ADV  
E
;
D
1
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS]  
>> [SEARCH] >> [PHOTO].  
INDEX STOP/SET INDEX  
K
L
2
Press the [9] Button 1 or [:] Button 2 on the  
Remote Controller.  
With each press of the corresponding button, still pictures recorded  
in Photoshot Mode are searched.  
A
Sounds are played back for approximately 4 seconds.  
ªScene Index Search  
INDEX  
1 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS]  
>> [SEARCH] >> [SCENE].  
B
2 Press the [9] Button or [:] Button on the  
Remote Controller.  
When the corresponding button is pressed once, the [S 1]  
S
1
Indication B appears, and searching of the subsequent scene  
marked with an index signal starts. Each time the button is pressed  
after the start of Scene Index Search, the indication changes from  
[S 2] to [S 9], and the beginning of the scene corresponding to the  
selected number will be searched.  
Up to 9 scene numbers can be selected.  
Continuous Index Search  
If the [9] Button or the [:] Button is pressed for 2 seconds or  
longer, search can be continued at several-second intervals. (To  
cancel, press the [1] Button 3 or the [] Button 4.)  
For other notes concerning this item, see page 48.  
33  
Playback Digital Effect Functions  
During playback, special digital effects can be added to the recorded  
pictures.  
Digital Effects 1 [EFFECT1]  
The same effects as those of Digital Effects, which are used during  
recording, are obtained. (l 28)  
Digital Effects 2 [EFFECT2]  
1) Sepia Mode [SEPIA]  
1) SEPIA  
2) B/W  
It records a scene with a brownish tint, like the colour of old  
pictures.  
2) Black & White Mode [B/W]  
It records an image in black and white.  
To Select a Desired Digital Effect  
Set [VCR FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] or  
[EFFECT2] >> a desired Digital Effect.  
To Cancel the Digital Effect  
Set [VCR FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] or  
[EFFECT2] >> [OFF].  
If the Movie Camera is turned off, the [EFFECT2] settings are  
cancelled.  
ªPlayback Digital Zoom Function  
The centre of the image is enlarged to approximately 2 times during  
playback.  
1
Set [VCR FUNCTIONS] >> [DIGITAL EFFECT] >>  
[D.ZOOM] >> [ON].  
To Cancel the Playback Digital Zoom Function  
Set [D.ZOOM] on the [DIGITAL EFFECT] Sub-Menu to [OFF].  
If you turn off the Movie Camera power or if you switch from VCR  
Mode to other Mode, Playback Digital Zoom Function is  
automatically cancelled.  
MENU  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
1
For other notes concerning this item, see page 48.  
ZOOM  
34  
Playing Back on Your TV  
By connecting your Movie Camera with your TV, the recorded  
scenes can be viewed on your TV screen.  
Before connecting them, turn off the power of both the Movie  
Camera and TV.  
[VIDEO IN]  
[S-VIDEO IN]  
1
Connect the [A/V IN/OUT] Socket of the Movie  
Camera and the Video and Audio Input Sockets of  
the TV.  
[AUDIO IN]  
1
2
Using the AV Cable 1, make a connection with the TV. If the  
1
TV has an S-Video Socket, connect the S-Video Cable 2 (not  
supplied), too.  
A/V  
IN/OUT  
PHONES  
S-VIDEO  
To Make the Indications Appear on the TV Screen  
Press the [OSD] Button 3 on the Remote Controller.  
For other notes concerning this item, see page 48.  
START/  
STOP  
DATE/ PHOTO  
TIME  
SHOT  
OSD  
3
COUNTER RESET  
ZOOM  
A~ud~io~D~u~b~bi~ng~~~~~~~~~~~~~~~  
T
You can add music or narration to the recorded Cassette.  
If the tape recorded in the [16bit] Mode is dubbed with the Audio  
Dubbing function, the original sound is erased. (If you wish to  
preserve the original sound, use the [12bit] Mode when recording.)  
Audio Dubbing cannot be performed on a recording done in LP  
Mode. (l 19)  
1
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
MULTI  
M-STOP  
BLC  
BLC  
1
Switch the Movie Camera over to the Still Playback  
Mode where you want to add new sound.  
2
Press the [A.DUB] Button on the Remote Controller.  
The same setting can be done using [RECORDING SETUP]  
Sub-Menu on the [VCR FUNCTIONS] Main-Menu.  
3
To start Audio Dubbing, press the [;] Button.  
To Cancel Audio Dubbing  
Press the [;] Button.  
The Movie Camera is in the Still Playback Mode again.  
To Play Back the Sound Recorded by 12bit Audio  
Dubbing  
START/  
DATE/ PHOTO  
TIME  
SHOT  
STOP  
OSD  
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [12bit  
COUNTER RESET  
ZOOM  
T
AUDIO] >> [ST2] or [MIX].  
ST1: It plays back only the original sound.  
ST2: It plays back only the sound added by Audio Dubbing.  
MIX: It plays back both the original sound and the sound added by  
Audio Dubbing simultaneously.  
2
3
¥REC A.DUB  
V
W
FF/  
/REW PLAY  
W
6
1
5
STILL ADV PAUSE/ITEM STILL ADV  
E
;
D
For other notes concerning this item, see page 49.  
35  
Copying on an S-VHS (or a VHS) Cassette  
(Dubbing)  
After connecting the Movie Camera and the VCR as illustrated  
at left, start the following procedures.  
Be sure to press the [OSD] Button (l 8) on the Remote Controller  
prior to copying so that no indications are visible. Otherwise, the  
displayed tape counter and function indications are also copied.  
Movie Camera:  
2, 4, 5  
1
Insert the recorded Cassette.  
VCR:  
[VIDEO IN]  
[S-VIDEO IN]  
2
Insert an unrecorded Cassette with an erasure  
prevention tab.  
If various setups (such as external input, tape speed, etc.) are  
required, please refer to the operating instructions of your  
VCR.  
[AUDIO IN]  
2
1
A/V  
IN/OUT  
PHONES  
Movie Camera:  
S-VIDEO  
3
Press the [1] Button to start playback.  
VCR:  
4
5
Start recording.  
Press the Pause or Stop Button to stop recording.  
Movie Camera:  
6
Press the [] Button to stop playback.  
1 S-Video Cable (not supplied)  
1, 3, 6  
2 AV Cable  
~~~~~~~~~~~~~~~~~~~~~~  
Recording the Contents of Other  
Equipment  
After connecting the Movie Camera and the other equipment as  
illustrated at left, start the following procedures.  
Movie Camera:  
3, 6  
1
Set [VCR FUNCTIONS] >> [RECORDING SETUP] >>  
[AV JACK] >> [IN].  
[VIDEO OUT]  
[S-VIDEO OUT]  
The [LINE-IN] Indication appears.  
2
Insert an unrecorded Cassette.  
Other Equipment:  
[AUDIO OUT]  
2
1
3
Insert a recorded Cassette and start playback.  
Movie Camera:  
A/V  
IN/OUT  
PHONES  
4
5
While pressing the [REC] Button, press the [1]  
Button.  
Press the [;] Button or [] Button to stop recording.  
1, 2, 4, 5  
S-VIDEO  
Other Equipment:  
6
Press the Stop Button to stop playback.  
SIS/  
P.B.DIS  
1 S-Video Cable (not supplied)  
LIGHT  
FADE  
REC  
2 AV Cable  
M-PLAY  
MULTI  
4
For other notes concerning this item, see page 49.  
M-STOP  
BLC  
BLC  
36  
Using the DV Cable for Recording  
(Digital Dubbing)  
SIS/  
P.B.DIS  
LIGHT  
FADE  
REC  
By connecting this Movie Camera with other digital video equipment  
that has a DV Input/Output Terminal using a DV Cable VW-CD1E  
4
M-DEL  
M-PLAY  
STILL/  
P-IN-P  
MULTI  
(optional) 1, dubbing can be done in the digital format.  
[Player/Recorder]  
M-STOP  
BLC  
BLC  
1
Insert the Cassette and set to the VCR Mode.  
[Player]  
2
Press the [1] Button to start playback.  
[Recorder]  
3
Set [VCR FUNCTIONS] >> [RECORDING SETUP] >>  
[AV JACK] >> [OUT/PHONES].  
4
While pressing the [REC] Button, press the [1]  
Button.  
Recording starts.  
To Stop Dubbing  
Press the [;] Button or the [] Button.  
For other notes concerning this item, see page 49.  
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
MULTI  
2
M-STOP  
BLC  
BLC  
P~er~so~n~al~C~om~p~u~te~r~Co~n~n~ec~ti~on~K~it~~~~  
(NV-DS30 only)  
Using the Personal Computer Connection Kit, you can import still  
pictures into your personal computer.  
Use the Digital Still Picture Terminal [TO PC] 1 when using the  
Personal Computer Connection Kit.  
When recording, be careful not to cut off the Time Code from the  
start of the tape.  
For more details on the operating environment, connections, and  
procedures, please refer to Personal Computer Connection Kits  
operating instructions.  
TO PC  
1
37  
CARD Mode  
Using a Card  
A Card can be used to record still pictures.  
Use genuine card only.  
ªInserting a Card  
Before inserting a Card, be sure to turn off the Movie Camera.  
1
2
3
Slide the [OPEN] Lever and open the Card Slot  
Cover.  
Insert the Card in the direction as shown in the  
illustration 1.  
2
Close the Card Slot Cover securely.  
3
1
Removing the Card  
ACCESS  
OPEN  
Open the Card Slot Cover and press the centre of the Card and then  
pull it straight out.  
After removing the Card, close the Card Slot Cover.  
1
The SD Memory Card has a write protection switch on it. 2 If the  
switch is moved to the [LOCK] side, you cannot write to or format  
the Card. If it is moved back, you can.  
ª[ACCESS] Lamp 3  
While the Movie Camera is making an access to the Card (reading,  
recording, playback, erasing, moving of images), the [ACCESS]  
2
Lamp lights up and the [PLEASE WAIT] Indication 4 appears.  
While the [ACCESS] Lamp is on, never attempt to open the Card  
Compartment, to pull out the Card or to turn off the Movie Camera.  
Such actions will damage the Card, cause loss of recorded data  
and cause the Movie Camera to malfunction.  
4
PLEASE WAIT  
38  
Recording on a Card  
PICTURE  
Still pictures can be recorded on a Card from the Movie Camera lens  
as well as from scenes that have already been recorded on a  
cassette.  
1
2
110  
320  
Card Photoshot cannot be used when a DV Cable is connected.  
PLAY:PUSH PLAY KEY  
ªCard Photoshot  
Recording from the Movie Camera Lens  
1
Slide the [LOCK] Switch to unlock.  
If the Card Lock Switch is set to lock, the [VCR/OFF/CAMERA/  
MENU  
PHOTOSHOT  
PUSH  
4
2
M-CARD] Switch cannot be set to [M-CARD].  
W.B./SHUTTER  
IRIS/MF/JOG  
2
Set the [VCR/OFF/CAMERA/M-CARD] Switch to  
[M-CARD].  
The [POWER] Lamp lights up. 3  
Set [CARD SETUP] >> [REC MODE] >> [320t240] or  
[640t480].  
Press the [PHOTOSHOT] Button.  
The [PROCESSING] Indication 4 appears and saving a  
picture takes some time. When saving is finished the  
3
3
4
POWER  
3
1
LOCK  
[COMPLETED] Indication 5 appears.  
If nothing is recorded for approximately 6 minutes with a Card  
inserted, the Movie Camera is turned off automatically.  
VCR  
OFF  
CAMERA  
M-CARD  
VCR  
OFF  
CAMERA  
M-CARD  
Recording from a Cassette  
1 Slide the [LOCK] Switch to unlock.  
If the Card Lock Switch is set to lock, the [VCR/OFF/CAMERA/  
M-CARD] Switch cannot be set to [M-CARD].  
2 Set the [VCR/OFF/CAMERA/M-CARD] Switch to  
[M-CARD].  
4
PROCESSING  
COMPLETED  
The [POWER] Lamp lights up. 3  
3 Set [CARD SETUP] >> [REC MODE] >> [320t240] or  
[640t480].  
4 Set the [VCR/OFF/CAMERA/M-CARD] Switch to  
[VCR].  
5 Start playback and set the Movie Camera to Still  
Playback Mode at the scene you wish to record, and  
press the [PHOTOSHOT] Button.  
5
Saving a picture takes some time.  
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
MULTI  
1 Remaining Number of Card Photoshot pictures  
M-STOP  
2 Picture Size  
6
BLC  
BLC  
Maximum number of images recordable on a supplied Card  
(8MB)  
[640k480] (high image quality): approximately 70 pictures  
[320k240] (Normal): approximately 190 pictures  
To Use the Backlight Compensation Function  
Press the [BLC] Button 6 in the Card Recording Mode. (l 23)  
For other notes concerning this item, see page 49.  
39  
Playing Back a Card  
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
It plays back images recorded on a Card.  
MULTI  
1
Slide the [LOCK] Switch to unlock.  
If the Card Lock Switch is set to lock, the [VCR/OFF/CAMERA/  
M-CARD] Switch cannot be set to [M-CARD].  
M-STOP  
3
BLC  
BLC  
2
3
Set the [VCR/OFF/CAMERA/M-CARD] Switch to  
[M-CARD].  
Press the [M-PLAY] Button.  
4, 5  
The still pictures recorded on the Card are displayed in Multi-  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
Picture Mode. 1  
2 File Number (If the colour of File Number is white, the picture  
size is [640k480], if green, the picture size is [320k240].)  
4
Turn the [PUSH] Dial and select a desired picture.  
The selected picture is underlined.  
When 7 or more pictures have been recorded, turn the [PUSH]  
Dial to display the next picture.  
LOCK  
2
CAMERA  
M-CARD  
1
VCR  
OFF  
5
Press the [PUSH] Dial.  
The selected picture is shown on the entire screen.  
1
1
4
2
5
3
6
3 File Number  
2
4 DCF Number (Folder-File Number)  
5 Picture Size (l 39)  
DELETE:M-DEL  
D-000  
PRESS STOP TO EXIT  
6 Number of prints set by DPOF (l 43)  
To Change the Display on the Screen  
3
4
5
6
Set [CARD SETUP] >> [DISPLAY] or [DCF NO.] >> [OFF].  
DISPLAY: Select [OFF] to cancel all displays on the screen  
DCF NO.: Select [OFF] to cancel DCF Number on the screen.  
Playing Back Another Picture  
PICTURE  
1
100-0002  
640  
D-000  
Turn the [PUSH] Dial and select [BACK] to play back the previous  
"
BACKMULTINEXT!  
7
Picture or [NEXT] to play back the next Picture 7. Then press the  
[PUSH] Dial.  
Returning to the Multi-Picture Mode  
Turn the [PUSH] Dial and select [MULTI] 7, then press the [PUSH]  
Dial.  
Returning to the Card Recording Mode  
Press the [M-STOP] Button in Multi-Picture Mode.  
For other notes concerning this item, see page 49.  
40  
Recording with a Photo Title  
Card Images can be recorded as the Photo Title in CAMERA Mode.  
1
Set [CAMERA FUNCTIONS] >> [PHOTO TITLE] >>  
[MODE] >> [WIPE] or [MIX].  
Set [CAMERA FUNCTIONS] >> [PHOTO TITLE] >>  
[TITLE] >> [SET].  
1, 2  
MENU  
PUSH  
W.B./SHUTTER  
2
IRIS/MF/JOG  
1, 2, 3, 4  
A list of Photo Titles is displayed. 1  
3
4
Turn the [PUSH] Dial to select a desired title.  
The selected Photo Title is underlined.  
Press the [PUSH] Dial.  
The selected Photo Title is shown on the entire screen and the  
5
[PHOTO TITLE SET] Indication 2 appears for approximately  
3 seconds, and the screen goes back to the Camera Mode  
screen.  
5
Press the Recording Start/Stop Button.  
[WIPE] or [MIX] screen is displayed at beginning of the  
recording.  
1
1
4
2
5
3
6
WIPE:  
The Photo Title is replaced with the current scene in a wiping  
motion.  
MIX:  
PRESS STOP TO EXIT  
The Photo Title is replaced with the current scene in a gradual  
mixing effect.  
For other notes concerning this item, see page 49.  
2
PHOTO TITLE SET  
41  
Deleting the Pictures Recorded on a Card  
Using the Movie Camera, you can delete the still pictures recorded  
on a Card. After the picture is deleted, it cannot be restored.  
To Select and Delete a Picture  
M-DEL  
STILL/  
P-IN-P  
M-PLAY  
1
1
MULTI  
5
M-STOP  
1
2
3
Press the [M-DEL] Button in the card playback mode.  
Select [FILE] and press the [PUSH] Dial.  
Select the picture and press the [PUSH] Dial.  
The selected Picture is underlined pink.  
A verification message appears.  
BLC  
BLC  
4
5
Select [YES] and press the [PUSH] Dial.  
The selected picture is deleted from the Card.  
If [NO] is selected, the picture selection is cancelled.  
Repeat Step 3 and 4 and press the [M-STOP] Button  
when the setup is completed.  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
To Delete All Pictures  
1 Press the [M-DEL] Button in the card playback mode.  
2 Select [ALL] and press the [PUSH] Dial.  
A verification message appears.  
2, 3, 4, 5  
,
2, 3  
3 Select [YES] and press the [PUSH] Dial.  
All the pictures recorded in the Card are deleted.  
To Format the Card  
1
2
Press the [M-DEL] Button in the card playback mode.  
Select [FORMAT] and press the [PUSH] Dial.  
A verification message appears.  
3
Select [YES] and press the [PUSH] Dial.  
All the data recorded in the Card are deleted.  
For other notes concerning this item, see page 49.  
42  
Writing Printing Data on a Card  
(DPOF Setting)  
DPOF Setting Printing data (DPOF Settings), such as the number of  
images to be printed, can be written to the Card. “DPOF” means  
Digital Print Order Format.  
1
2, 3,  
4, 5  
MENU  
1
2
Press [MENU] Button in the card playback mode.  
Set [CARD SETUP] >> [DPOF] >> [ON] >>  
[VARIABLE] >> [ON].  
PUSH  
W.B./SHUTTER  
IRIS/MF/JOG  
Pictures recorded on the Card are displayed in Multi-Picture  
Mode. 1  
To print all pictures one at a time, select [ALL 1]. When all  
images are not printed, select [ALL 0].  
3
4
Select a desired picture.  
The number of prints set by DPOF 2 is displayed.  
Turn the [PUSH] Dial and select the number of  
pictures to be printed, and press the [PUSH] Dial.  
[µ] Indication 3 is displayed in the picture set.  
Repeat Step 3 and 4 and press the [M-STOP] Button  
when the setup is completed.  
1
2
5
3
6
1
3
2
4
5
DPOF SETTING  
D-001  
PRESS STOP TO EXIT  
For other notes concerning this item, see page 49.  
U~si~ng~t~he~U~S~B~C~o~nn~e~ct~io~n ~Ki~t ~~~~~~  
Using the USB Connection Kit, you can import still pictures into your  
personal computer.  
1
2
3
Install the supplied USB driver.  
Select the desired mode of the Movie Camera.  
Connect the supplied USB Cable 1 to [USB] Socket.  
2
It enters PC connection mode.  
The USB Connection Kit can be used with Windows98 Second  
Edition/Me/2000/XP.  
1
Use the AC Adaptor as power source for the Movie Camera. (The  
Card or its contents may be destroyed if battery power is lost while  
transmitting data.)  
Mode cannot be changed in PC connection mode by setting the  
[VCR/OFF/CAMERA/M-CARD] Switch.  
TO PC  
For more details on the operating environment, installation,  
connections, and procedures, please refer to USB Connection  
Kits operating instructions.  
2
43  
5:  
7:  
4:  
Sports Mode (Programme AE)  
(l 24)  
Portrait Mode (Programme AE)  
Others  
(l 24)  
Indications  
Low Light Mode (Programme AE)  
(l 24)  
Spotlight Mode (Programme AE)  
(l 24)  
Surf & Snow Mode  
Various functions and the Movie Camera status are  
shown on the screen.  
Some Indications may not be displayed according  
to the model.  
:  
º:  
(Programme AE) (l 24)  
Recording (l 18)  
Recording Pause (l 18)  
Playback (l 30)  
Still Playback (l 32)  
REC:  
PAUSE:  
!:  
;:  
%:  
r:  
Remaining Battery Power  
When the battery power becomes low, the  
Indication changes. When the battery is  
discharged completely, the u (v)  
Indication flashes.  
Fast-forward/Cue Playback (l 31)  
Rewind/Review Playback (l 30)  
Slow Motion Playback (l 31)  
Still Advance Playback (l 32)  
Index Search (l 33)  
Recording Check (l 18)  
Audio Dubbing (l 35)  
Audio Dubbing Pause (l 35)  
Photoshot Mode Recording (l 20)  
Blank Search (l 32)  
Variable Speed Search (l 31)  
When you adjust shutter speed  
manually, this indication appears.  
(l 26)  
When you adjust the F Number  
manually, this indication appears.  
(l 27)  
&:  
s:  
(When you are using the AC  
Adaptor, the [s] Indication may  
appear, however, this is not a  
malfunction.)  
~, }:  
";, ;!:  
SEARCH:  
A.DUB !:  
A.DUB ;:  
PHOTO:  
BLANK:  
2k%:  
1/500:  
R0:45:  
Remaining Tape Time  
Remaining tape time is indicated in minutes.  
(When it reaches less than 3 minutes, the  
indication starts flashing.)  
CINEMA:  
D.ZOOM:  
P-IN-P:  
WIPE:  
Cinema Mode (l 23)  
Digital Zoom (l 21)  
Picture in Picture Mode (l 28)  
Wipe Mode (l 28)  
Mix Mode (l 28)  
Strobe Mode (l 28)  
Gain-up Mode (l 28)  
Trailing Effect Mode (l 28)  
Mosaic Mode (l 28)  
Mirror Mode (l 28)  
Slim Mode (l 28)  
Stretch Mode (l 28)  
Sepia Mode (l 34)  
Black & White Mode (l 34)  
Playback Digital Zoom (l 34)  
Standard Mode (Recording Speed  
Mode) (l 19)  
MIX:  
F2.4:  
STROBE:  
GAINUP:  
TRACER:  
MOSAIC:  
MIRROR:  
SLIM:  
STRETCH:  
SEPIA:  
B/W:  
Automatic White Balance Mode  
(l 25)  
1:  
z:  
{:  
White Balance setting Mode (l 25)  
Outdoor Mode (l 25)  
Indoor Mode (recording under  
incandescent lamp) (l 25)  
Zoom Microphone (l 21)  
Wind Noise Reduction (l 24)  
Progressive Photoshot Mode  
(l 20)  
Z.MIC:  
WIND CUT:  
æ:  
ZOOM:  
SP:  
LP:  
Long Play Mode (Recording Speed  
Mode) (l 19)  
:
Video Light is on. (l 19)  
INDEX:  
S 1:  
5k:  
Index signal recording (l 33)  
Search Number (l 33)  
Zoom Magnification Indication  
(l 21)  
0LUX:  
VOLUME:  
15:30:45:  
0 Lux Night View Mode (l 23)  
Volume adjustment (l 30)  
Date/Time Indication (l 45)  
PLEASE WAIT:While Card is being read (during  
AUTO:  
MNL:  
[:  
Automatic Mode (l 18)  
Manual Mode (l 25, 26, 27)  
Image Stabilizer (l 22)  
Playback, Formatting and Multi-  
Picture Function use) (l 38)  
PROCESSING:Card Photoshot Recording (l 39)  
COMPLETED: Card Photoshot Recording  
completed (l 39)  
12 bit, 16 bit: Audio Recording Mode (l 19)  
MF:  
ª:  
Manual Focus (l 27)  
Back Light Mode (l 23)  
44  
CONNECT WITH PC:  
Movie Camera is connected with  
Warning/Alarm Indications  
If any one of the following indications lights up or  
flashes, please check the condition of the Movie  
Camera.  
PC.  
WEBCAM:  
CAPTURE:  
STORAGE:  
00:  
PC connection mode  
(in Camera mode)  
PC connection mode  
(in VCR mode)  
PC connection mode  
(in Card playback mode)  
Remaining Number of Card  
Photoshot pictures (l 39)  
DCF Number (l 40)  
Number of prints set by DPOF  
(l 43)  
Some Indications may not be displayed according  
to the model.  
3:  
Y:  
Condensation has occurred. (l 51)  
The accidental erasure prevention  
slider on the inserted Cassette is  
open (that is, set to [SAVE]).  
You are about to do audio dubbing  
on the unrecorded (blank) portion of  
the tape.  
100-0001:  
D-001:  
No Cassette is inserted. (l 12)  
The Battery is low. Recharge it.  
(l 10)  
1(white):  
1(green):  
File Number ([640k480] Image  
size)(l 40)  
File Number ([320k240] Image  
size)(l 40)  
6:  
0:  
The built-in battery is discharged.  
(l 17)  
¥:  
640:  
320:  
DPOF Setting completed (l 43)  
[640k480] Image size  
[320k240] Image size  
::  
2END:  
The video heads are dirty. (l 52)  
The tape came to end during  
recording.  
For images not recorded with this Movie Camera,  
the size display is determined as follows according  
to the number of horizontal pixels.  
REMOTE:  
Wrong Remote Controller Mode  
has been selected. (l 46)  
UNPLAYABLE TAPE (OTHER FORMAT):  
You are attempting to play back  
640:  
From 640 to 800 (The size is not  
displayed at under 640 pixels.)  
From 800 to 1024  
a tape section that has been  
recorded with a different TV  
system.  
SVGA:  
XGA:  
From 1024 to 1280  
SXGA:  
UXGA:  
From 1280 to 1600  
Over 1600  
UNABLE TO A. DUB (LP RECORDED):  
Because the original recording  
was done in LP Mode, audio  
dubbing cannot be performed.  
ªTo Change the Counter Display  
Mode  
By changing [C.DISPLAY] on the [DISPLAY  
SETUP] Sub-Menu, you can change the Counter  
Display Mode to Tape Counter Indication  
[COUNTER] (0:00.00), Memory Counter Indication  
[MEMORY] (M0:00.00), and Time Code Indication  
[TIMECODE] (0h00m00s00f). (l 14) By repeatedly  
pressing the [COUNTER] Button on the Remote  
Controller, you can change the Counter Display  
Mode.  
INCOMPATIBLE TAPE:  
This Cassette is incompatible.  
CARD LOCKED: When you are attempting to  
write the data on an SD Memory  
Card whose write protection  
switch is set at [LOCK].  
FILE LOCKED:  
When you are attempting to  
delete a locked picture. The  
locked picture cannot be  
deleted.  
ªTo Display Date/Time Indication  
To display Date/Time Indication, set the appropriate  
Date/Time in [DATE/TIME] on the [DISPLAY  
SETUP] Sub-Menu. (l 14)  
You can also press the [DATE/TIME] Button of the  
Remote Controller repeatedly to display or change  
the Date/Time Indication.  
NO SPACE LEFT: Card does not have sufficient  
memory remaining.  
CARD FULL:  
Card does not have sufficient  
memory remaining.  
NO CARD:  
NO PICTURE:  
Card is not inserted.  
Card has no pictures recorded  
on it.  
ªTo Change the Display Mode  
By changing [DISPLAY] on the [DISPLAY SETUP]  
Sub-Menu, you can change the Display Mode to All  
Function Display [ALL], Partial Display [PARTIAL],  
and Minimum Display [OFF].  
CARD ERROR:  
This Card is not compatible with  
this Movie Camera.  
45  
COPY INHIBITED: Because the medium is  
protected by a copy guard,  
images cannot be recorded  
correctly.  
When you switch the [VCR/OFF/CAMERA/  
M-CARD] Switch from [OFF] to Camera Mode or  
Card Recording Mode.  
2 Beeps  
CAN NOT CHANGE MODE:  
When you pause recording  
The Mode of the Movie Camera 10 Beeps  
can not be changed in the PC  
connection Mode.  
If you perform a wrong operation before or during  
recording  
ªRecording  
~~~~~~~~~~~~~~~~~  
Before turning on the power, remove the Lens  
Cap. If the Lens Cap is still attached when the  
power is turned on, Automatic White Balance  
Adjustment (l 56) may not function correctly.  
Notes and Hints  
ªSelecting Remote Controller Modes  
When 2 Movie Cameras are used simultaneously,  
they can be operated individually by selecting  
different Remote Controller Modes.  
If the Remote Controller Mode of the Movie  
Camera and that of the Remote Controller do not  
match, [REMOTE] Indication is displayed.  
Setup on the Movie Camera:  
Set [REMOTE] on the [OTHER FUNCTIONS] Sub-  
Menu to the desired Remote Controller Mode.  
(l 14)  
Setup on the Remote Controller:  
[VCR1]: Press the [D] Button and [] Button  
simultaneously.  
ªRecording Check  
For Recording Check, the recording speed mode  
(SP/LP) must be the same as the mode used for  
the recording. If different, playback images will be  
distorted.  
ªPhotoshot  
Photoshot Recording results in slightly inferior  
image quality.  
ªProgressive Photoshot Function  
The still pictures are recorded at a slightly  
rewound point from where you press the  
[PHOTOSHOT] Button.  
[VCR2]: Press the [E] Button and [] Button  
simultaneously.  
When the battery in the Remote Controller is  
replaced, the mode is automatically reset to  
[VCR1] Mode.  
When you change to the Still Picture Mode, you  
will hear a click. This is the sound of the iris closing  
and not an indication of malfunction.  
If you record still pictures in Progressive Photoshot  
Mode when your Movie Camera is set to  
Programme AE (l 24), the brightness of the  
images may change.  
When you set the following functions,  
[PROGRESSIVE] will be set to [OFF].  
Digital Effect Modes in [EFFECT] (l 28)  
Digital Zoom [D.ZOOM] (l 21)  
Image Stabilizer Function [SIS] (l 22)  
When [PROGRESSIVE] is set to [ON], the shutter  
speed cannot be adjusted to 1/750 s or faster.  
(l 26)  
ªZoom In/Out Functions  
When you are zooming on a faraway subject, a  
sharper focus is achieved if the recording subject  
is 1.7 metres or more away from the Movie  
Camera.  
ªConcerning the Power Supply  
When the Movie Camera is used for a long time,  
the Camera body becomes warm, but this is not a  
malfunction.  
If the [CHARGE] Lamp does not light up although  
the Battery is attached to AC Adaptor, detach the  
Battery and reattach it.  
Battery CGP-D110 and CGP-D105 cannot be  
charged with this AC Adaptor.  
ªInserting/Removing the Cassette  
If a new Cassette is inserted, rewind to the  
beginning of the tape before starting recording.  
When inserting the cassette, make sure it faces in  
the right direction and then push it in until it stops.  
ªAlarm Sounds  
When [BEEP SOUND] on the [OTHER  
FUNCTIONS] Sub-Menu on the [CAMERA  
FUNCTIONS] Main-Menu is set to [ON],  
confirmation/alarm beeps are issued as follows.  
1 Beep  
When you start recording  
46  
           
If you record a subject illuminated with strong  
light or a highly reflective subject, vertical lines  
of light may appear.  
If the light is insufficient, the [5] Indication  
flashes.  
ªImage Stabilizer Function  
The Image Stabilizer Function does not operate in  
a dimly lit place. In this case, the [[] Indication  
lights up.  
Under fluorescent lighting, image brightness may  
change or colours may not look natural.  
After-images may appear.  
If this mode is used for indoor recording,  
playback images may flicker.  
Sports Mode/Portrait Mode  
When a tripod is used, it is recommended that you  
turn the Image Stabilizer off.  
If you record a still picture in Progressive  
Photoshot Mode, the brightness and hue of  
the recorded still picture may become  
unstable.  
ªCinema Function  
If you play back tape recorded in Cinema Mode on  
a wide-screen (16:9) format TV, playback size is  
automatically adjusted to fit the TV screen format.  
Please refer to the TV’s operating instructions for  
details.  
Low Light Mode  
Extremely dark scenes may not be able to be  
made brighter to a satisfactory degree.  
Spotlight Mode  
With this mode, recorded images may turn out  
to be extremely dark.  
If the recording subject is extremely bright, its  
recorded image may turn out to be whitish.  
Surf & Snow Mode  
When images are displayed on a TV screen, the  
Date/Time Indication may be erased in some  
cases.  
ª0 Lux Night View Function  
The 0 Lux Night View Function should not be used  
in brightly-lit places, and the Movie Camera should  
not be directed toward the sun. Otherwise,  
irreparable damage may occur.  
If the recording subject is extremely bright, its  
recorded image may turn out to be whitish.  
ªWhite Balance  
Scenes taken by the 0 Lux Night View Function  
are played back in black and white.  
When recording with the 0 Lux Night View  
Function, operating the shutter speed, iris and  
white balance is not possible.  
You cannot change White Balance if you set  
[EFFECT] of [DIGITAL EFFECT] Sub-Menu on the  
[CAMERA FUNCTIONS] Main-Menu to [GAINUP].  
In the following cases, the [1] Indication  
flashes:  
While the 0 Lux Night View Function is operating,  
you cannot use any of the Programme AE Modes. The flashing indicates that the previously adjusted  
When the 0 Lux Night View Function is in use, the  
subject should be within 3 metres of the Movie  
Camera.  
When the automatic focusing is not precise, adjust  
the focus manually. (l 27) (In this case, the  
Manual Focus Mode is activated when the  
[FOCUS] Button is pressed even then the Movie  
Camera is in the Full Auto Mode.)  
White Balance setting is still kept. This setting will  
be kept until White Balance is adjusted again.  
You may not be able to achieve correct White  
Balance Adjustment manually under weak  
ªManual Shutter Speed Adjustment  
You may see vertical lines of light in the playback  
image of a brightly shining subject or highly  
reflective subject.  
During normal playback, movement in the images  
may not look smooth.  
Because the colour and brightness of the playback  
image may become unstable, avoid recording  
under fluorescent light, mercury light, or sodium  
light.  
If you are using either Gain-up Mode (l 28) or  
Programme AE Mode (l 24), you cannot adjust  
the shutter speed. If the shutter speed was  
adjusted manually, this setting will be cancelled.  
ªProgramme AE  
If any of the Programme AE Modes is selected,  
you cannot adjust the shutter speed (l 26) or iris  
(l 27).  
You cannot use Sports Mode, Portrait Mode or  
Low-Light Mode with Gain-up Mode [GAINUP].  
Sports Mode  
During normal playback, the image movement  
may not look smooth.  
Because the colour and brightness of the  
playback image may change, avoid recording  
under fluorescent light, mercury light, or  
sodium light.  
47  
     
Multi-Picture Mode  
ªManual Iris Adjustment  
The quality of Multi images deteriorates slightly.  
Playback Multi-Mode screens cannot be output  
through the DV Terminal (l 37) or Digital Still  
Picture Terminal (l 6).  
If there is input from DV Terminal, a multi screen  
cannot be created.  
When signals are input from S-Video Input/Output  
Socket or Audio-Video Input/Output Socket, a  
Multi Screen cannot be re-displayed.  
Signals input from S-Video Input/Output Socket or  
Audio-Video Input/Output Socket cannot be  
displayed on a Multi Screen.  
Depending on zoom magnification, there are iris  
values that will not be displayed.  
If you are using Programme AE Mode (l 24), you  
cannot adjust the iris. If the iris is adjusted  
manually, this setting will be cancelled.  
If you attempt to adjust the Shutter Speed after  
setting the Iris, the value set for the Iris will be  
cancelled.  
ªDigital Effect Functions  
When you set the following functions, [EFFECT]  
will be set to [OFF].  
Progressive Photoshot Function  
ªIndex Search Functions  
Index Search may not be possible at the beginning  
of tape.  
[PROGRESSIVE] (l 20)  
Digital Zoom [D.ZOOM] (l 21)  
Image Stabilizer Function [SIS] (l 22)  
Because Photoshot Index Signals are not  
recorded on still pictures recorded in Continuous  
Photoshot Mode, the Photoshot Index Search  
Function cannot be used for these still pictures.  
Scene Index Search may not function properly if  
the interval between 2 scene index signals is  
shorter than 1 minute.  
It is as follows when [GAINUP] is selected.  
Manual Focus Mode  
The shutter speed and White Balance cannot be  
operated.  
The Sports Mode [5], the Portrait Mode [7]  
and Low Light Mode [4] are cancelled.  
Wipe Mode and Mix Mode  
ªPlayback Digital Effect Functions  
out, stored images will be erased, and Wipe and Mix When [EFFECT1] on the [DIGITAL EFFECT] Sub-  
If either one of the following operations is carried  
Functions cannot be used.  
Record with Photo Title Function.  
Menu is set to [TRACER], the digital modes of  
[EFFECT2] cannot be used.  
Signals of images to which digital effects are  
added during playback cannot be output from the  
DV Terminal (l 6) or Digital Still Picture Terminal  
(l 37).  
Even if Playback Digital Zoom Functions are being  
used, images that are output from the DV Terminal  
(l 6) or Digital Still Picture Terminal (l 37) are  
not enlarged.  
As you enlarge an image, the quality of image  
suffers.  
ªPlaying Back on Your TV  
Picture-in-Picture Mode  
If the Movie Camera is turned off, the smaller  
picture disappears.  
The position of a small picture is fixed at the  
bottom right of the screen.  
ªPlaying Back  
Repeat Playback  
If you continue to press the [1] Button for 5 seconds  
or longer, the Movie Camera switches to Repeat  
Playback Mode, and the [R !] Indication appears.  
(To cancel Repeat Playback Mode, set the [VCR/  
OFF/CAMERA/M-CARD] Switch to [OFF].)  
Listening to Playback Sound through  
If you set [AV JACK] on the [RECORDING  
SETUP] Sub-Menu to [IN], nothing will be shown  
on the TV screen except during playback.  
Headphones  
When you wish to listen to playback sound through  
headphones, set [AV JACK] on the [RECORDING  
SETUP] Sub-Menu to [OUT/PHONES] and connect  
the headphones to the [PHONES] Socket (l 7) on  
the Movie Camera. In this case, no sound (including  
a warning sound and shutter sound) will be  
reproduced through the built-in speaker of the Movie  
Camera.  
48  
               
This Movie Camera can also play back the Mega-  
Pixel still pictures recorded with the other  
equipment. However it takes longer than usual  
time.  
When the size of the picture played back is over  
[1280k960], the picture played back in small size  
on the LCD Monitor.  
ªAudio Dubbing  
The blank section of a tape cannot be dubbed.  
Sounds sent through the DV Terminal cannot be  
dubbed.  
If a tape has a non-recorded portion when the tape  
is dubbed, images and sounds may be disturbed  
when this portion of the tape is played back.  
If you set the tape counter back to 0 at the position  
where you want to stop Audio Dubbing so as to  
make it possible to use the Memory Stop Function  
(l 56), Audio Dubbing is terminated automatically  
when the tape reaches this position.  
In the case of importing data recorded with Audio  
Dubbing to a PC using the PC’s software  
programme, only the original sound (ST1) may be  
imported, depending on the software programme.  
ªPhoto Title  
The Photo Title Function and Digital Function  
cannot be used simultaneously.  
After recording, the Photo TItle setting is cleared  
automatically.  
ªFormatting a Card  
If a Card becomes unreadable by the Movie  
Camera, formatting it may make it reusable.  
Formatting erases all the data recorded on a Card.  
When the formatting is completed, the [NO  
PICTURE] Indication appears.  
ªRecording the Contents of Other  
Equipment  
Analog-Digital Conversion  
When the Movie Camera is connected with other  
digital video equipment through its DV Terminal,  
images recorded in analog form from other  
external equipment can be output to the digital  
video equipment through the DV Terminal.  
It may not be possible to use the Card which was  
formatted using this Movie Camera on another  
unit. In this case, format the Card on the unit which  
will be using the Card. Take steps to ensure that  
valuable pictures are stored on the personal  
computer, etc. as well before proceeding.  
ªDPOF  
ªUsing the DV Cable for Recording  
Perform the DPOF Settings with your own Movie  
Camera in use.  
(Digital Dubbing)  
Regardless of the setting, digital dubbing is carried  
out automatically in the same audio recording  
mode as that of the Cassette on the playback-side.  
The images on the monitor of the recording side  
may be disturbed, but it does not affect the  
recorded images.  
Even if Playback Digital Effects or Playback Digital  
Zoom Function have been used, these effects are  
not output from the DV Terminal.  
Even if you use device equipped with DV  
Terminals (such as IEEE1394), you may not be  
able to perform Digital Dubbing in some cases.  
Do not connect both an S-Video Cable or AV  
Cable and a DV Cable.  
Verifying the DPOF Settings may take a little time.  
Wait until the [ACCESS] Lamp goes out.  
ªUsing a Card in a Personal  
Computer (NV-DS50 only)  
To erase pictures that you recorded on the Card  
by using the Movie Camera, be sure to erase them  
on the Movie Camera, not on the computer.  
Using the optional DV Editing Software (Motion DV  
STUDIO) for Windows (VW-DTM20/21/22), variety  
of visual effects can be added and title can be  
created.  
You may not be able to properly play back or  
search the images on the Movie Camera after  
editing the recorded data or changing the image  
data on a personal computer.  
The image data files recorded on the Card with  
this Movie Camera conform to the DCF (Design  
Rules for Camera Files Systems universal  
standard) stipulated by JEITA (Japan Electronics  
and Information Technology Industries  
Association).  
ªRecording on a Card  
The sound cannot be recorded.  
The Shutter Effect cannot be used.  
Pictures with wide-screen format signals cannot  
be copied.  
ªPlaying Back a Card  
If a blank (nothing recorded) Card is played, the  
screen becomes white and the [NO PICTURE]  
Indication appears.  
If you attempt to play back a still picture recorded  
in a different format or a picture whose image data  
is defective, the [INCOMPATIBLE IMAGE]  
Indication could appear as warning.  
49  
         
Constructing a Folder when the Card is  
used with a PC  
When a Card with data recorded on it is inserted  
into a personal computer, folders will be displayed  
as in the figure.  
Cautions for Use  
In the event of abnormal operation (e.g. if the unit  
emits smoke or an unusual smell), immediately stop  
operating the unit and consult the Panasonic  
Customer Care Centre on 132600.  
ªAfter Use  
1
2
Take out the Cassette. (l 12)  
Set the [VCR/OFF/CAMERA/M-CARD]  
Switch to [OFF].  
3
4
Take out the Card. (NV-DS50 only)  
Detach the power supply and retract the  
Viewfinder or the LCD Monitor.  
(l 10, 13)  
5
To protect the Lens, attach the supplied  
Lens Cap.  
ªCautions for Use  
[100cdpfp]: The images (Imga0001.jpg, etc.) in  
this folder are recorded in the JPEG  
format.  
When you use your Movie Camera in a rainy or  
snowy day or on a beach, make sure that no  
water enters inside the Movie Camera.  
Water may cause the Movie Camera or Cassette  
to malfunction. (Irreparable failure may occur.)  
If sea water splashes onto the Movie Camera, wet  
a soft cloth with tap water, wring it well, and use it  
to wipe the camera body carefully. Then, wipe it  
again thoroughly with a soft dry cloth.  
[Misc]:  
Files in which DPOF Data has been  
set to the image are in this.  
[Dcim], [Im01cdpf], etc. are necessary items in the  
folder structure. They have nothing to do with  
actual operations.  
In the Card Photoshot Mode, the Movie Camera  
automatically saves file numbers (Imga0001.jpg,  
etc.) along with the images. The file numbers are  
recorded with each image as a consecutive  
number.  
Keep the Movie Camera away from magnetized  
equipment (such as a microwave oven, TV,  
video game equipment, etc.).  
The memory capacity indicated on the SD Card  
label corresponds to the total amount of the  
capacity to protect and manage the copyright and  
of the capacity available as a conventional  
memory for a Movie Camera, Personal Computer  
or others.  
If you use the Movie Camera on or near a TV,  
images or sounds may be disturbed due to  
electromagnetic wave radiation.  
Do not use near a cell phone because doing so  
may cause noise to adversely affect the picture  
and sound.  
By strong magnetic fields created by speakers or  
large motors, recording on the tape may be  
damaged, or images may be distorted.  
Electromagnetic wave radiation generated by a  
microprocessor may adversely affect the Movie  
Camera, causing the disturbance of images and  
sounds.  
Capacity that can be used as conventional  
memory:  
8MB Card  
about 6,800,000 bytes  
If the Movie Camera is affected by magnetically  
charged equipment and does not function  
properly, turn off the Movie Camera power and  
detach the Battery or AC Adaptor and then  
connect the Battery or AC Adaptor again.  
Thereafter, turn on the Movie Camera power.  
50  
 
Do not use your Movie Camera near radio  
transmitters or high-voltage lines.  
If you record pictures near radio transmitters or  
high-voltage lines, recorded images or sounds  
may be adversely affected.  
ªAbout AC Adaptor  
If the temperature of the Battery is extremely high  
or extremely low, the [CHARGE] Lamp may  
continue flashing, and the Battery may not be  
charged. After the temperature of the Battery has  
decreased or increased sufficiently, charging  
starts automatically. If the [CHARGE] Lamp  
continues to flash even after the Battery  
temperature has decreased or increased  
sufficiently, the Battery or AC Adaptor may be  
faulty. In this case, please contact a dealer.  
If the Battery is warm, charging takes a longer time  
than normal.  
Do not use this Movie Camera for surveillance  
purpose or other business use.  
If you use the Movie Camera for a long period of  
time, the internal temperature increases and,  
consequently, this may cause malfunction.  
This Movie Camera is not intended for business  
use.  
When you use your Movie Camera on a beach or  
similar place, do not let sand or fine dust get  
into the Movie Camera.  
Sand or dust may damage the Movie Camera or  
Cassette. (Care should be taken when inserting  
and removing the Cassette.)  
Do not spray insecticides or volatile chemicals  
onto the Movie Camera.  
If the Movie Camera is sprayed with such  
chemicals, the camera body may be deformed and  
the surface finish may peel off.  
Do not keep rubber or plastic product in contact  
with the Movie Camera for a long period of time.  
Do not use benzine, thinner or alcohol for  
cleaning the Movie Camera.  
If you use the AC Adaptor near a radio, radio  
reception may be disturbed. Keep the AC Adaptor  
1 metre or more away from radio.  
When the AC Adaptor is in use, it may generate  
whirring sounds. However, this is normal.  
After use, be sure to pull out the AC Mains Lead  
from the AC mains socket. (If they are left  
connected, a minute amount of current is  
consumed.)  
Keep the electrodes of the AC Adaptor and Battery  
always clean.  
ªCondensation  
If the Condensation Indication flashes after the  
Movie Camera is turned on, condensation has  
formed inside the Movie Camera. In this case, the  
Movie Camera power is turned off automatically  
after about 1 minute.  
The camera body may be deformed and the  
surface finish may peel off.  
Before cleaning, detach the Battery or pull out the  
AC Mains Lead from the AC mains socket.  
Wipe the Movie Camera with a soft dry cloth. To  
remove stubborn stains, wipe with a cloth that is  
soaked in a detergent diluted with water and  
afterward finish wiping with a dry cloth.  
For storing or transporting the Movie Camera,  
place it in a bag or case lined with soft pads so as  
to prevent the coating on the camera body from  
being worn.  
After use, be sure to take the Cassette out and  
detach the Battery from the Movie Camera or  
pull out the AC Mains Lead from AC mains  
socket.  
If the Cassette is left in the Movie Camera, the  
tape sags and deteriorates.  
Follow the steps below:  
1
Take out the Cassette.  
None of the other functions operate.  
Depending on the amount of condensation,  
removing the Cassette may even become  
difficult. If this happens, wait for  
2 to 3 hours before taking the Cassette out.  
2
3
Open the Cassette Compartment Cover  
and wait for 2 to 3 hours.  
The number of hours to wait depends on the  
amount of condensation and ambient  
temperature.  
2 to 3 hours later, turn on the Movie  
Camera power and check to see if the  
Condensation Indication is displayed.  
Even if the Condensation Indication is not  
displayed, as a precaution, please wait for  
another hour before using the Movie Camera.  
If the Battery is left on the Movie Camera for a long  
time, the voltage drops excessively, and the  
Battery will not function even after it is recharged.  
51  
     
Watch for Condensation even before the  
Condensation Indication is displayed.  
Because condensation takes place gradually, the  
Condensation Indication may not be displayed  
during the first 10 to 15 minutes of condensation  
formation inside the Movie Camera.  
In extremely cold places, condensation may freeze  
and form frost. In this case, the frost melts first,  
thus forming condensation, and then it takes  
Do not clean the heads excessively. (Excessive  
cleaning may cause excessive wear of the heads.  
If the heads are worn, images cannot be played  
back even after the heads are cleaned.)  
If the dirty heads cannot be cleaned with the Head  
Cleaner, the Movie Camera needs to be cleaned  
at a service centre. Please consult a dealer.  
Video Head Cleaners can be purchased from  
service centres.  
another 2 to 3 hours to eliminate the condensation. Head cleaning due to dirty heads is not considered  
When the Lens is Fogged:  
Set the [VCR/OFF/CAMERA/M-CARD] Switch to  
a malfunction of the product. It is not covered by  
the warranty.  
[OFF] and leave the Movie Camera in this condition Periodical Check-up  
for about 1 hour. When the lens temperature  
becomes close to the ambient temperature, the fog  
disappears naturally.  
To maintain the highest image quality, we  
recommend replacement of worn parts, such as  
heads, etc., after approximately 1000 hours of use.  
(This, however, depends on operating conditions,  
such as temperature, humidity, dust, etc.)  
ªVideo Head Clogging and Care  
If the heads (the parts that make contact with tape)  
are dirty, mosaic-pattern noise may appear on the  
ªOptimal Use of the Battery  
playback image, or the screen as a whole becomes Battery Characteristics  
black. If the heads are extremely dirty, recording  
performance deteriorates, and, in the worst case,  
the Movie Camera cannot record at all.  
Causes of Dirty Heads  
Large quantity of dust in the air  
High-temperature and high-humidity environment  
Damaged tape  
Long operating hours  
Using Mini-DV Format Digital Video Head  
Cleaner  
This Battery is a rechargeable lithium ion battery. Its  
ability to generate power is based upon the  
chemical reaction that takes place inside it. This  
reaction is susceptible to the surrounding  
temperature and humidity, and, if the temperature is  
too high or too low, the operating time of the Battery  
becomes shorter. If the Battery is used in an  
extremely cold environment, the Battery may  
operate only for about 5 minutes. If the Battery  
becomes extremely hot, a protective function may  
operate, and the Battery may become unusable for  
a while.  
Be Sure to Detach the Battery after Use  
Be sure to detach the Battery from the Movie  
Camera. (If it is left attached to the Movie Camera, a  
minute amount of current is consumed even when  
the Movie Camera power is off.) If the Battery is left  
attached to the Movie Camera for a long time, over  
discharge takes place. The Battery may become  
unusable after it is charged.  
1
2
3
Insert the Head Cleaner into the Movie  
Camera in the same manner as a Video  
Cassette.  
Press the [1] Button, and  
approximately 20 seconds later, press  
the [] Button. (Do not rewind the tape.)  
Take out the Head Cleaner. Insert a  
Video Cassette and start recording.  
Then, play the tape back to check the  
recorded image.  
Disposing of an Unusable Battery  
The Battery has a limited life.  
4
If the image is not still clear, repeat  
Steps 1 to 3. (Do not use the Head  
Cleaner for 3 times or more  
Do not throw the Battery into fire because it may  
cause an explosion.  
Always Keep the Terminals of the Battery Clean  
Prevent the terminals from getting clogged with dirt,  
dust, or other substances.  
consecutively.)  
Notes:  
Do not rewind every time you use the Head  
Cleaner. Rewind only when the tape reaches the  
end, and then use it again from the beginning in  
the same manner as before.  
If the heads become dirty soon after cleaning, the  
tape may be damaged. In this case, immediately  
stop using that Cassette.  
If you drop the Battery accidentally, check to see if  
the Battery body and terminals are deformed.  
Attaching a deformed Battery to the Movie Camera  
or AC Adaptor may damage the Movie Camera or  
AC Adaptor.  
52  
     
The surface of tape is covered with extremely  
minute magnetic particles, upon which signals are  
recorded. Magnetic necklaces, toys, etc., have  
magnetic force that is stronger than you may  
normally expect, and they may erase the contents  
of a recording or may cause noise in images and  
sounds.  
Card (NV-DS50 only)  
After usage, store the supplied SD memory card in  
the enclosed bag.  
When the Card is being read, do not remove the  
Card, turn off the power, or subject it to vibration or  
impact.  
Do not leave the Card in places where there is  
high temperature or direct sunlight, or where  
electromagnetic waves or static electricity are  
easily generated.  
Do not bend or drop the Card. The Card or the  
recorded content may be damaged.  
After use, be sure to remove the Card from the  
Movie Camera.  
Do not touch the terminals on the back of the Card  
with your fingers. Do not allow dirt, dust or water to  
enter it.  
ªCautions for Storage  
Before storing the Movie Camera, take the  
Cassette out and detach the Battery.  
Store all the components in a dry place with a  
relatively stable temperature.  
(Recommended Temperature: 15 to 25oC,  
Recommended Humidity: 40 to 60%)  
Movie Camera  
Wrap it with a soft cloth to prevent dust from  
getting into the Camera.  
Do not leave the Movie Camera in places that  
expose it to high temperature.  
Battery  
Extremely high temperatures or low temperatures  
will shorten the life of the Battery.  
If the Battery is kept in smoky or dusty places, the  
terminal may rust and cause malfunctions.  
Do not allow the Battery terminals to come in  
contact with metal objects (such as necklaces,  
hairpins, etc.). This can result in a short circuit  
or heat generation and, if you touch the Battery  
in this condition, you may be badly burned.  
Store the Battery in a completely discharged state.  
To store the Battery for a long period of time, we  
recommend you charge it once every year and  
store it again after you completely use up the  
charged capacity.  
ªLCD Monitor/Viewfinder/Lens  
LCD Monitor  
In a place with drastic temperature changes,  
condensation may form on the LCD Monitor. Wipe  
it with soft dry cloth.  
Cassette  
Before storing it, rewind the tape to the beginning.  
If the Cassette is left for more than 6 months with  
the tape stopped midway, the tape sags (although  
it depends on the storage condition). Be sure to  
rewind to the beginning.  
If your Movie Camera is extremely cold when you  
turn its power on, the image on the LCD Monitor is  
slightly darker than usual at first. However, as the  
internal temperature increases, it goes back to the  
normal brightness.  
Store the Cassette in its case. Dust, direct sunlight  
(ultraviolet rays), or humidity may damage the  
tape. Dust contains hard mineral particles, and  
dusty Cassettes damage the heads of the Movie  
Camera and other components. Develop a habit of  
returning the Cassette back to its case.  
Once every half year, wind the tape to the end and  
then rewind it to the beginning. If the Cassette is  
left for 1 year or longer without winding or  
rewinding, temperature and humidity changes may  
cause the Cassette to deform due to swelling,  
shrinking, and so forth. The wound tape may stick  
to itself.  
.................................................................................  
Extremely high precision technology is employed to  
produce the LCD Monitor screen featuring a total of  
approximately 110,000 pixels. The result is more  
than 99.99% effective pixels with a mere 0.01% of  
the pixels inactive or always lit. However, this is not  
a malfunction and does not affect the recorded  
picture.  
.................................................................................  
Viewfinder  
Do not direct the Viewfinder or Lens to the sun.  
Internal components may be seriously damaged.  
When the Movie Camera is used with a large  
capacity Battery (CGP-D28S/CGP-D320,  
CGA-D54S; optional) attached to it, it is not  
practical to look in the Viewfinder from behind the  
Battery. In this case, lift up the Viewfinder to an  
easy-to-see angle.  
Do not place a Cassette near highly magnetic  
substances or equipment.  
53  
   
.................................................................................. 1-3: Has the Battery worn out? If the operating time  
is still too short even after the Battery is fully  
charged, the Battery has worn out.  
Extremely high precision technology is employed to  
produce the Viewfinder screen featuring a total of  
2: The Battery cannot be charged.  
approximately 63,200 pixels. The result is more than  
2: If the DC Input Lead is connected to the AC  
99.99% effective pixels with a mere 0.01% of the  
Adaptor, charging cannot be performed.  
Disconnect the DC Input Lead.  
Normal Recording  
pixels inactive or always lit. However, this is not a  
malfunction and does not affect the recorded  
picture.  
1: Recording does not start although power is  
supplied to the Movie Camera and the  
Cassette is correctly inserted.  
1-1: Is the accidental erasure prevention slider on  
the Cassette open? If it is open (set to [SAVE]),  
recording cannot be performed. (l 12)  
1-2: Is the tape wound to the end? Insert a new  
Cassette. (l 12)  
1-3: Is the [VCR/OFF/CAMERA/M-CARD] Switch  
set to [CAMERA]? If it is set to the other  
position, the recording function cannot be used.  
(l 18)  
1-4: Has condensation occurred? Wait until the  
Condensation Indication disappears. (l 51)  
Other Recording  
..................................................................................  
Lens  
If you push the [W/T] Lever toward [W] during  
recording with the optional filter or conversion lens  
attached to the Movie Camera, 4 corners of the  
image may become dark (vignetting). For details,  
please refer to the operating instructions of your  
accessories.  
ªBuilt-in Video Light  
The temperature of the Video Light may become  
very hot, therefore, be careful not to touch the  
glass part of the front of the Movie Camera, when  
using the Video Light for a long time.  
The life of the electoric bulb of the Video Light is  
limited, and when it burns out, please consult with  
your local Panasonic Dealer.  
1: Auto Focus Function does not work.  
1-1: Is Manual Focus Mode selected? If Auto Focus  
Mode is selected, focus is automatically  
adjusted. (l 27)  
1-2: There are some recording subjects and  
recording surroundings for which the Auto  
Focus Function does not operate correctly. In  
this case, use the Manual Focus Mode to  
adjust the focus. (l 56)  
~~~~~~~~~~~~~~~~~  
Before Requesting Repair  
(Problems and Solutions)  
Power  
1: The Movie Camera power cannot be turned  
on.  
Editing  
1: Audio dubbing cannot be performed.  
1-1: Is the accidental erasure prevention slider on  
the Cassette open? If it is open (set to [SAVE]),  
recording cannot be performed. (l 12)  
1-2: Are you attempting to edit a tape portion that  
was recorded in LP Mode? LP Mode does not  
allow audio dubbing to operate. (l 19)  
Indications  
1: The Time Code becomes inaccurate.  
1: The Time Code Indication counter may not be  
constant in the reverse direction in Slow Motion  
Playback Mode, but this is not a malfunction.  
2: The Remaining Tape Time Indication  
disappears.  
1: Is the power source connected correctly?  
(l 10)  
2: The Movie Camera power is turned off  
automatically.  
2: If you leave the Movie Camera in Recording  
Pause Mode for more than 6 minutes, the  
power is turned off automatically to protect the  
tape and to save the Battery power. (l 18)  
3: The Movie Camera power does not stay on  
long enough.  
3-1: Is the Battery low? Charge the Battery or attach  
a fully charged Battery. (l 10)  
3-2: Has condensation occurred? Wait until the  
Condensation Indication disappears. (l 51)  
Battery  
1: Battery runs down quickly.  
1-1: Is the Battery fully charged? Charge it with the  
AC Adaptor. (l 10)  
2: When you record still pictures in Photoshot  
Mode, the Remaining Tape Time Indication  
may disappear temporarily. However, it  
reappears when recording normally.  
1-2: Are you using the Battery in an extremely cold  
place? In cold places, the operating time of the  
Battery becomes shorter. (l 52)  
54  
 
3: The Remaining Tape Time Indication does  
not match the actual remaining tape time.  
3-1: If scenes of less than 15 seconds are  
continuously recorded, the remaining tape time  
cannot be displayed correctly.  
3-2: In some cases, the Remaining Tape Time  
Indication may show remaining tape time that is  
2 to 3 minutes shorter than the actual  
remaining tape time.  
4: Sounds cannot be played back.  
4-1: Although a Cassette with no audio dubbing is  
being played, is [12bit AUDIO] on the  
[PLAYBACK FUNCTIONS] Sub-Menu of the  
[VCR FUNCTIONS] Main-Menu set to [ST2]?  
To play back a Cassette with no audio dubbing,  
[12bit AUDIO] must be set to [ST1]. (l 35)  
4-2: Is the Variable Speed Search Function  
working? Press the [1] Button to cancel the  
Variable Speed Search Function. (l 31)  
Card (NV-DS50 only)  
1: Card Photoshot Playback images do not  
look normal.  
1: The picture may be damaged. In order to  
prevent the loss of image data, backing up on a  
personal computer is recommended.  
(l 37, 49)  
Playback (Images)  
1: Images cannot be played back even when  
the [1] Button is pressed.  
1: Is the [VCR/OFF/CAMERA/M-CARD] Switch  
set to [VCR]? If it is set to the other position, the  
playback function cannot be used. (l 30)  
2: Mosaic-pattern noise appears on images  
during Cue, Review or Slow Motion  
Playback.  
2: This phenomenon is characteristic of digital  
video systems. It is not a malfunction.  
3: Although the Movie Camera is correctly  
connected to a TV, playback images cannot  
be seen.  
2: During Playback the [k] Indication is  
displayed.  
2: The image was either recorded in a different  
format, or data is damaged.  
3: Even if a Card is formatted, it cannot be  
used.  
3: Have you selected “Video Input” on the TV?  
Please read the operating instructions of your  
TV and select the channel that matches the  
input sockets used for the connection.  
4: Playback image is not clear.  
4: Are the heads of the Movie Camera dirty? If the  
heads are dirty, playback image cannot be  
clear. (l 52)  
3: Either the Movie Camera or the Card may be  
damaged. Please consult a dealer.  
~~~~~~~~~~~~~~~~~  
Explanation of Terms  
ªDigital Video System  
In a digital video system, images and sounds are  
converted into digital signals and recorded on a  
tape. This complete digital recording is capable of  
recording and playback with minimal image and  
sound deterioration.  
Playback (Sound)  
1: Sound is not played back from the built-in  
speaker of the Movie Camera or the  
headphones.  
In addition, it automatically records data, such as  
Time Code and Date/Time, as digital signals.  
Compatibility with S-VHS or VHS Cassettes  
Because this Movie Camera employs a digital  
system for recording image and sound data, it is not  
compatible with conventional S-VHS or VHS video  
equipment that employs an analog recording  
system.  
The size and shape of the Cassette are also  
different.  
Compatibility with Output Signals  
Because AV signal output from the AV signal output  
socket is analog (the same as conventional video  
systems), this Movie Camera can be connected with  
S-VHS or VHS video or a TV for playback.  
1: Is the volume too low? Push the [VOLUME]  
Lever to adjust the volume. (l 30)  
2: Different sounds are reproduced at the  
same time.  
2: [12bit AUDIO] on the [PLAYBACK  
FUNCTIONS] Sub-Menu of the [VCR  
FUNCTIONS] Main-Menu has been set to  
[MIX]. As a result, the original sound and sound  
that was recorded by audio dubbing are played  
back together. It is possible to reproduce the  
sounds separately. (l 35)  
3: The original sound was erased when audio  
dubbing was performed.  
3: If you perform audio dubbing on a recording  
done in [16bit] Mode, the original sound will be  
erased. If you wish to preserve the original  
sound, be sure to select [12bit] Mode at the  
time of recording.  
55  
 
Automatic White Balance Adjustment  
This Movie Camera stores settings that are optimal  
for several kinds of general light sources. The Movie  
Camera determines the hue of light that it receives  
through the Lens, thereby judging the recording  
condition, and selects the closest hue setting. This  
function is called Automatic White Balance  
Adjustment.  
However, since white balance settings for only  
several kinds of light sources are stored, the Auto  
White Balance Function does not operate properly  
when recording occurs under light that is out of the  
range of the setup values.  
ªFocus  
Auto Focus Adjustment  
The Auto Focus System automatically moves  
forward and backward the focusing lens inside the  
Movie Camera to bring the subject into focus so that  
the subject can be seen clearly.  
However, the Auto Focus System does not function  
properly for the following subjects or under the  
following recording conditions.  
Please use the Manual Focus Mode instead.  
1) Recording a subject whose one end is  
located closer to the Movie Camera and the  
other end farther away from it  
ªTime Code  
Because Auto Focus makes adjustments at  
the centre of an image, it may be impossible to Time Code signals are data that indicate time  
focus on a subject that is located in both  
foreground and background.  
2) Recording a subject behind dirty or dusty  
glass  
measured in hours, minutes, seconds, and frames  
(25 frames per second). If this data is included in a  
recording, an address is assigned to each image on  
the tape.  
Because the focus is on the dirty glass, the  
subject behind the glass will not be focused.  
3) Recording a subject in dark surroundings  
Because the light information that comes  
through the lens decreases considerably, the  
Movie Camera cannot focus correctly.  
4) Recording a subject that is surrounded by  
objects with glossy surfaces or by highly  
reflective objects  
The Time Code is automatically recorded as a part  
of the sub-code at each recording.  
When a new (previously unrecorded) Cassette is  
inserted, the Time Code automatically starts from  
zero. If a recorded Cassette is inserted, the Time  
Code picks up from the point where the last scene  
was recorded. (In this case, when the Cassette is  
inserted, the zero display [0h00m00s00f] may  
appear, but the Time Code starts from the  
previous value.)  
The Time Code cannot be reset to zero.  
Unless the Time Code is continuously recorded  
from the beginning of a tape, accurate editing may  
not be possible. To ensure that the Time Code will  
be recorded with no breaks, we recommend the  
use of the Blank Search Function (l 32) before  
recording a new scene.  
Because the Movie Camera focuses on the  
objects with glossy surfaces or on highly  
reflective objects, the recording subject may  
become blurry.  
5) Recording a fast-moving subject  
Because the focus lens inside moves  
mechanically, it cannot keep up with the fast-  
moving subject.  
6) Recording a subject with little contrast  
Because the Movie Camera achieves focus  
based upon the vertical lines of an image, a  
subject with little contrast, such as a white  
wall, may become blurry.  
ªMemory Stop Function  
The Memory Stop Function is useful for the  
following operations.  
Rewinding or fast-forwarding a tape to a desired  
position  
ªWhite Balance Adjustment  
1
Set [DISPLAY SETUP] >> [C.DISPLAY]  
>> [MEMORY].  
Depending on the type of light source, the colours  
recorded by the Movie Camera may be affected. In  
some cases, images may be recorded with bluish or  
reddish hue. To minimize the effect of light on the  
subject’s colour, what is called White Balance  
Adjustment becomes necessary.  
2
Reset the Tape Counter to zero at the  
tape position from which you want to  
play it back later. (l 8, 15)  
Start playback or recording.  
After playback or recording has  
finished:  
3
4
White Balance Adjustment  
White Balance Adjustment recognizes the colour of  
light and makes adjustment so that the white colour  
will become pure white.  
Set the [VCR/OFF/CAMERA/M-CARD]  
Switch to [VCR].  
56  
               
5
Rewind the tape.  
ªDemonstration Mode  
The tape automatically stops approximately at If no operation takes place for approximately  
the position where the counter was set to zero. 10 minutes after the AC Adaptor was connected to  
Stopping editing automatically during audio  
dubbing  
the Movie Camera and the [VCR/OFF/CAMERA/  
M-CARD] Switch was turned to [CAMERA] without  
inserting a Cassette, the Movie Camera is  
1
Set [DISPLAY SETUP] >> [C.DISPLAY]  
>> [MEMORY].  
automatically set to Demonstration Mode for  
introducing its functions. If any button is pressed or  
operated, the Demonstration Mode is cancelled.  
The Demonstration Mode can be started by setting  
[DEMO MODE] on the [OTHER FUNCTIONS] Sub-  
Menu of the [CAMERA FUNCTIONS] Main-Menu to  
[ON] and by exiting the Menu. To terminate the  
Demonstration Mode, insert a Cassette or set the  
[DEMO MODE] to [OFF].  
2
Reset the Tape Counter to zero at the  
position where you want to stop  
editing.  
3
4
Play back the still picture where you  
want to start audio dubbing.  
Start audio dubbing. (l 35)  
Audio dubbing automatically stops at the  
position where the counter was set to zero.  
ªOwner ID  
You can register your name and address in your  
Movie Camera to identify the owner.  
1
Set [CAMERA FUNCTIONS] >> [OTHER  
FUNCTIONS] >> [OWNER ID SET] >>  
[ON].  
The [OWNER ID] Menu appears.  
Turn the [PUSH] Dial to select  
[PIN NUMBER] and press the [PUSH]  
Dial to input desired numbers.  
Turn the [PUSH] Dial to select numbers  
and press the [PUSH] Dial to enter  
them.  
2
3
You can input 4 digits.  
4
5
Press the [] Button.  
Repeat Steps 2–4 to input desired  
characters for [NAME] and  
[POSTCODE].  
You can input up to 12 characters in [NAME],  
and up to 11 characters in [POSTCODE].  
Press the [] Button to finish the setup.  
6
To verify Owner ID  
Keep pressing the [;] Button for approximately  
5 seconds.  
To Check Owner ID  
If Owner ID has already been set, carrying out Step  
1 above will display [INPUT PIN NUMBER] on the  
screen. Input the Pin Number you have already  
selected. If the number is not correct, the screen will  
not change. If the number is correct, the contents of  
the setup will be displayed. (By repeating Steps 2 to  
4 above, you can change the contents.)  
57  
Weight:  
(NV-DS30)  
Approx. 570 g (without Battery  
and DV cassette)  
Specifications  
Digital Video Camera  
Information for your safety  
Approx. 650 g (with CGR-D08R  
and DVM60)  
Power Source:  
Power Consumption:  
DC 7.9/7.2 V  
(NV-DS50)  
Approx. 580 g (without Battery  
and DV cassette)  
Approx. 660 g (with CGR-D08R  
and DVM60)  
(NV-DS30) Recording  
2.9 W (When using Viewfinder)  
4.5 W (When using LCD  
Monitor)  
(NV-DS50) Recording  
3.3 W (When using Viewfinder)  
4.9 W (When using LCD  
Monitor)  
Operating Temperature: 0 oCj40 oC  
Operating Humidity:  
10%j80%  
Card Memory Functions  
Recording Media:  
(NV-DS50 only)  
MultiMediaCard, SD Memory  
Card  
Recording Format:  
Tape Used:  
Mini DV (Consumer-use Digital  
Video SD Format)  
6.35 mm digital video tape  
Image Compression:  
JPEG  
Recording/Playback Time: SP: 80 min.; LP: 120 min. (with  
DVM80)  
AC Adaptor  
Information for your safety  
Video  
Recording System:  
Television System:  
Digital Component  
CCIR: 625 lines, 50 fields PAL  
colour signal  
Power Source:  
Power Consumption:  
DC Output:  
AC 100–240 V, 50/60 Hz  
20 W  
DC 7.9 V, 9 W (Movie Camera  
Operation)  
DC 8.4 V, 1.2 A (Battery  
Charging)  
Audio  
Recording System:  
PCM Digital Recording  
16 bit (48 kHz/2ch),  
12 bit (32 kHz/4ch)  
1/4-inch CCD Image Sensor  
Auto Iris, F1.8, Focal Length;  
3.6–36 mm,  
Macro (Full Range AF)  
43 mm  
10:1 Power Zoom  
2.5-inch LCD  
Image Sensor:  
Lens:  
Dimensions:  
Weight:  
Weight and dimensions are approximate values.  
Specifications may change without prior notice.  
70 (W)k45 (H)k116 (D) mm  
Approx. 165 g  
Filter Diameter:  
Zoom:  
Monitor:  
Viewfinder:  
Microphone:  
Electronic Viewfinder  
Stereo  
Speaker:  
1 round speaker 20 mm  
1,400 lx  
Standard Illumination:  
Minimum Required  
Illumination:  
1 lx (Digital Gain-up Mode)  
1.0 Vp-p, 75 ohm  
Video Output Level:  
S-Video Output Level:  
Y Output: 1.0 Vp-p, 75 ohm  
C Output: 0.3 Vp-p, 75 ohm  
Audio Output Level (Line): 316 mV, 600 ohm  
Video Input Level:  
S-Video Input Level:  
1.0 Vp-p, 75 ohm  
Y Input: 1.0 Vp-p, 75 ohm  
C Input: 0.3 Vp-p, 75 ohm  
Audio Input Level (Line): 316 mV, 10 kohm or more  
Mic Input:  
Mic sensitivity –50 dB  
(0 dB=1 V/Pa, 1 kHz)  
(Stereo mini jack)  
Digital Still Picture:  
(NV-DS30 only)  
Digital Still Picture Output,  
Control  
Signal Input/Output  
(Transfer rate: max. 115 kbps)  
DV Input/Output Terminal  
(IEEE1394, 4-pin)  
Digital Interface:  
USB:  
(NV-DS50 only)  
Card reader/writer function,  
USB 1.1 compliant (max.  
12Mbps)  
Dimensions:  
Approx. 74 (W)k89 (H)k188  
(D) mm  
58  
 
Index  
Mirror Mode .......................................................28  
Mix Mode ...........................................................28  
ªA  
AC Adaptor .................................................. 10, 51  
Audio Dubbing ................................................... 35  
Auto Focus ........................................................ 56  
Automatic White Balance Adjustment ............... 56  
ªP  
Photo Title .........................................................41  
Photoshot ....................................................20, 39  
Playback Digital Effects .....................................34  
Portrait Mode .....................................................24  
Programme AE ..................................................24  
ªB  
Backlight Compensation ................................... 23  
Black & White Mode .......................................... 34  
Blank Search ..................................................... 32  
ªC  
Card Photoshot ................................................. 39  
Card Playback ................................................... 40  
Charging the Battery ......................................... 10  
Cinema Mode .................................................... 23  
Continuous Photoshot ....................................... 20  
Cue Playback .................................................... 31  
ªR  
Remote Controller ...............................................8  
ªD  
Shutter Speed ...................................................26  
Slow Motion Playback .......................................31  
Sound Volume ...................................................30  
SP/LP Mode ......................................................19  
Sports Mode ......................................................24  
Spotlight Mode ..................................................24  
Stretch Mode .....................................................28  
Strobe Mode ......................................................28  
Surf & Snow Mode ............................................24  
Date/Time Setting ............................................. 17  
DCF ................................................................... 49  
Digital Effects .................................................... 28  
Digital Still Picture ............................................. 20  
Digital Zoom ...................................................... 21  
Dubbing ....................................................... 36, 37  
ªE  
Erasure Prevention Slider ................................. 12  
ªF  
F Number .......................................................... 27  
Fade .................................................................. 22  
Time Code .........................................................56  
Trailing Effect Mode ..........................................28  
ªG  
Gain-up Mode ................................................... 28  
ªH  
USB Connection Kit ...........................................43  
Headphones ...................................................... 48  
ªI  
Variable Speed Search .....................................31  
Viewfinder ....................................................13, 53  
Iris ..................................................................... 27  
ªJ  
Jog Playback ..................................................... 32  
ªL  
White Balance ...................................................56  
Wipe Mode ........................................................28  
LCD Monitor ...................................................... 13  
Low Light Mode ................................................. 24  
ªZ  
ªM  
Zoom .................................................................21  
Zoom Microphone .............................................21  
Macro Close-up ................................................. 21  
Manual Focus .................................................... 27  
Memory Stop ..................................................... 56  
Menu Screen ..................................................... 14  
Microphone ....................................................... 21  
59  
 
A
VQT9695  
F0102Me0 ( 6500 A)  
C
Matsushita Electric Industrial Co., Ltd.  

Rockford Fosgate FRC2269 User Manual
RobinAir Camcorder EY15D User Manual
Profile MP6600 User Manual
Philips Car Video System 192E+04 User Manual
Panasonic SV SD100V User Manual
Panasonic DMP BD45 User Manual
Nokia Reaction BH 907 User Manual
Meade 8 x 42 20D CaptureView TM Integrated Binocular and Digital Camera User Manual
Life is good WiFi Network Blu ray Disc Player BD590 User Manual
Kenwood CASSETTE RECEIVER KRC PS978R User Manual